X-Git-Url: http://git.osdn.net/view?p=android-x86%2Fdevice-generic-common.git;a=blobdiff_plain;f=init.sh;h=ccd105818a8b852e9d7d1b37ffb45f28bb68cfe8;hp=8ca4e3b35ca4b170c6904defd1cad53b3060f31c;hb=bb31984dc557e75d66b29f8ba9b4e5e586e5b505;hpb=2181825646c97548e02498cb614a90177233e30b

diff --git a/init.sh b/init.sh
index 8ca4e3b..ccd1058 100644
--- a/init.sh
+++ b/init.sh
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2013-2015 The Android-x86 Open Source Project
+# Copyright (C) 2013-2018 The Android-x86 Open Source Project
 #
 # License: GNU Public License v2 or later
 #
@@ -10,6 +10,11 @@ function set_property()
 	[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
 }
 
+function set_prop_if_empty()
+{
+	[ -z "$(getprop $1)" ] && set_property "$1" "$2"
+}
+
 function init_misc()
 {
 	# device information
@@ -21,6 +26,10 @@ function init_misc()
 
 	# in case no cpu governor driver autoloads
 	[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
+
+	# enable sdcardfs if /data is not mounted on tmpfs or 9p
+	mount | grep /data\ | grep -qE 'tmpfs|9p'
+	[ $? -ne 0 ] && modprobe sdcardfs
 }
 
 function init_hal_audio()
@@ -46,10 +55,9 @@ function init_hal_bluetooth()
 	done
 
 	case "$PRODUCT" in
-		T10*TA|HP*Omni*)
+		T10*TA|M80TA|HP*Omni*)
 			BTUART_PORT=/dev/ttyS1
 			set_property hal.bluetooth.uart.proto bcm
-			[ -z "$(getprop sleep.state)" ] && set_property sleep.state none
 			;;
 		MacBookPro8*)
 			rmmod b43
@@ -127,20 +135,24 @@ function init_uvesafb()
 			;;
 	esac
 
-	[ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
-	modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+	modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
 }
 
 function init_hal_gralloc()
 {
 	case "$(cat /proc/fb | head -1)" in
 		*virtiodrmfb)
-			set_property ro.hardware.hwcomposer drm
-			set_property ro.hardware.gralloc gbm
+			if [ "$HWACCEL" != "0" ]; then
+				set_property ro.hardware.hwcomposer drm
+				set_property ro.hardware.gralloc gbm
+			fi
+			set_prop_if_empty sleep.state none
 			;;
 		0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
-			set_property ro.hardware.gralloc drm
-			set_drm_mode
+			if [ "$HWACCEL" != "0" ]; then
+				set_property ro.hardware.gralloc drm
+				set_drm_mode
+			fi
 			;;
 		"")
 			init_uvesafb
@@ -171,6 +183,9 @@ function init_hal_power()
 
 	# TODO
 	case "$PRODUCT" in
+		HP*Omni*|OEMB|Surface*3|T10*TA)
+			set_prop_if_empty sleep.state none
+			;;
 		*)
 			;;
 	esac
@@ -241,30 +256,38 @@ function init_hal_sensors()
 			modprobe hdaps
 			hal_sensors=hdaps
 			;;
-		*i7Stylus*)
-			set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+		*i7Stylus*|*M80TA*)
+			set_property ro.iio.accel.x.opt_scale -1
+			;;
+		*ONDATablet*)
+			set_property ro.iio.accel.order 102
+			set_property ro.iio.accel.x.opt_scale -1
+			set_property ro.iio.accel.y.opt_scale -1
 			;;
 		*ST70416-6*)
-			set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
+			set_property ro.iio.accel.order 102
 			;;
-		*ONDATablet*)
-			set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
+		*T10*TA*)
+			set_property ro.iio.accel.y.opt_scale -1
 			;;
 		*)
-			#has_sensors=false
+			has_sensors=false
 			;;
 	esac
 
 	# has iio sensor-hub?
 	if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
 		busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
-		lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+		[ -n "`ls /sys/bus/iio/devices/iio:device*/in_accel_x_raw 2> /dev/null`" ] && has_sensors=true
+		hal_sensors=iio
 	elif lsmod | grep -q lis3lv02d_i2c; then
 		hal_sensors=hdaps
+		has_sensors=true
+	elif [ "$hal_sensors" != "kbd" ]; then
+		has_sensors=${HAS_SENSORS:-true}
 	fi
 
 	set_property ro.hardware.sensors $hal_sensors
-	[ "$hal_sensors" != "kbd" ] && has_sensors=true
 	set_property config.override_forced_orient $has_sensors
 }
 
@@ -354,6 +377,8 @@ function do_netconsole()
 
 function do_bootcomplete()
 {
+	hciconfig | grep -q hci || pm disable com.android.bluetooth
+
 	init_cpu_governor
 
 	[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
@@ -408,12 +433,13 @@ function do_bootcomplete()
 			alsa_amixer -c $c set Headphone on
 			alsa_amixer -c $c set Headphone 100%
 			alsa_amixer -c $c set Speaker 100%
-			alsa_amixer -c $c set Capture 100%
+			alsa_amixer -c $c set Capture 80%
 			alsa_amixer -c $c set Capture cap
 			alsa_amixer -c $c set PCM 100 unmute
 			alsa_amixer -c $c set SPO unmute
-			alsa_amixer -c $c set 'Mic Boost' 3
-			alsa_amixer -c $c set 'Internal Mic Boost' 3
+			alsa_amixer -c $c set IEC958 on
+			alsa_amixer -c $c set 'Mic Boost' 1
+			alsa_amixer -c $c set 'Internal Mic Boost' 1
 		fi
 	done
 
@@ -435,9 +461,6 @@ for c in `cat /proc/cmdline`; do
 			eval $c
 			if [ -z "$1" ]; then
 				case $c in
-					HWACCEL=*)
-						set_property debug.egl.hw $HWACCEL
-						;;
 					DEBUG=*)
 						[ -n "$DEBUG" ] && set_property debug.logcat 1
 						;;