#define HELP_toybox_float "Include floating point support infrastructure and commands that\nrequire it.\n\n"
+#define HELP_toybox_libcrypto "Use faster hash functions out of exteral -lcrypto library.\n\n"
+
#define HELP_toybox_smack "Include SMACK options in commands like ls for systems like Tizen.\n\n\n"
#define HELP_toybox_selinux "Include SELinux options in commands such as ls, and add\nSELinux-specific commands such as chcon to the Android menu.\n\n"
#define HELP_setenforce "usage: setenforce [enforcing|permissive|1|0]\n\nSets whether SELinux is enforcing (1) or permissive (0).\n\n"
+#define HELP_sendevent "usage: sendevent DEVICE TYPE CODE VALUE\n\nSends a Linux input event.\n\n"
+
#define HELP_runcon "usage: runcon CONTEXT COMMAND [ARGS...]\n\nRun a command in a specified security context.\n\n"
#define HELP_restorecon "usage: restorecon [-D] [-F] [-R] [-n] [-v] FILE...\n\nRestores the default security contexts for the given files.\n\n-D apply to /data/data too\n-F force reset\n-R recurse into directories\n-n don't make any changes; useful with -v to see what would change\n-v verbose: show any changes\n\n"
#define HELP_mknod "usage: mknod [-m MODE] NAME TYPE [MAJOR MINOR]\n\nCreate a special file NAME with a given type. TYPE is b for block device,\nc or u for character device, p for named pipe (which ignores MAJOR/MINOR).\n\n-m Mode (file permissions) of new device, in octal or u+x format\n\n"
-#define HELP_sha1sum "usage: sha1sum [FILE]...\n\ncalculate sha1 hash for each input file, reading from stdin if none.\nOutput one hash (20 hex digits) for each input file, followed by\nfilename.\n\n-b brief (hash only, no filename)\n\n"
+#define HELP_sha512sum "See sha1sum\n\n"
+
+#define HELP_sha384sum "See sha1sum\n\n"
+
+#define HELP_sha256sum "See sha1sum\n\n"
-#define HELP_md5sum "usage: md5sum [FILE]...\n\nCalculate md5 hash for each input file, reading from stdin if none.\nOutput one hash (16 hex digits) for each input file, followed by\nfilename.\n\n-b brief (hash only, no filename)\n\n"
+#define HELP_sha224sum "See sha1sum\n\n"
+
+#define HELP_sha1sum "usage: sha?sum [-b] [-c FILE] [FILE]...\n\ncalculate sha hash for each input file, reading from stdin if none. Output\none hash (40 hex digits for sha1, 56 for sha224, 64 for sha256, 96 for sha384,\nand 128 for sha512) for each input file, followed by filename.\n\n-b brief (hash only, no filename)\n-c Check each line of FILE is the same hash+filename we'd output.\n\n"
+
+#define HELP_md5sum "usage: md5sum [-b] [-c FILE] [FILE]...\n\nCalculate md5 hash for each input file, reading from stdin if none.\nOutput one hash (32 hex digits) for each input file, followed by filename.\n\n-b brief (hash only, no filename)\n-c Check each line of FILE is the same hash+filename we'd output.\n\n"
#define HELP_killall "usage: killall [-l] [-iqv] [-SIGNAL|-s SIGNAL] PROCESS_NAME...\n\nSend a signal (default: TERM) to all processes with the given names.\n\n-i ask for confirmation before killing\n-l print list of all available signals\n-q don't print any warnings or error messages\n-s send SIGNAL instead of SIGTERM\n-v report if the signal was successfully sent\n\n"
#define HELP_useradd "usage: useradd [-SDH] [-h DIR] [-s SHELL] [-G GRP] [-g NAME] [-u UID] USER [GROUP]\n\nCreate new user, or add USER to GROUP\n\n-D Don't assign a password\n-g NAME Real name\n-G GRP Add user to existing group\n-h DIR Home directory\n-H Don't create home directory\n-s SHELL Login shell\n-S Create a system user\n-u UID User id\n\n"
-#define HELP_tr "usage: tr [-cds] SET1 [SET2]\n\nTranslate, squeeze, or delete characters from stdin, writing to stdout\n\n-c/-C Take complement of SET1\n-d Delete input characters coded SET1\n-s Squeeze multiple output characters of SET2 into one character\n\n"
-
#define HELP_traceroute "usage: traceroute [-46FUIldnvr] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n[-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE] [-z PAUSE_MSEC] HOST [BYTES]\n\ntraceroute6 [-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES][-s SRC_IP] [-t TOS] [-w WAIT_SEC]\n [-i IFACE] HOST [BYTES]\n\nTrace the route to HOST\n\n-4,-6 Force IP or IPv6 name resolution\n-F Set the don't fragment bit (supports IPV4 only)\n-U Use UDP datagrams instead of ICMP ECHO (supports IPV4 only)\n-I Use ICMP ECHO instead of UDP datagrams (supports IPV4 only)\n-l Display the TTL value of the returned packet (supports IPV4 only)\n-d Set SO_DEBUG options to socket\n-n Print numeric addresses\n-v verbose\n-r Bypass routing tables, send directly to HOST\n-m Max time-to-live (max number of hops)(RANGE 1 to 255)\n-p Base UDP port number used in probes(default 33434)(RANGE 1 to 65535)\n-q Number of probes per TTL (default 3)(RANGE 1 to 255)\n-s IP address to use as the source address\n-t Type-of-service in probe packets (default 0)(RANGE 0 to 255)\n-w Time in seconds to wait for a response (default 3)(RANGE 0 to 86400)\n-g Loose source route gateway (8 max) (supports IPV4 only)\n-z Pause Time in milisec (default 0)(RANGE 0 to 86400) (supports IPV4 only)\n-f Start from the 1ST_TTL hop (instead from 1)(RANGE 1 to 255) (supports IPV4 only)\n-i Specify a network interface to operate with\n\n"
+#define HELP_tr "usage: tr [-cds] SET1 [SET2]\n\nTranslate, squeeze, or delete characters from stdin, writing to stdout\n\n-c/-C Take complement of SET1\n-d Delete input characters coded SET1\n-s Squeeze multiple output characters of SET2 into one character\n\n"
+
#define HELP_tftpd "usage: tftpd [-cr] [-u USER] [DIR]\n\nTransfer file from/to tftp server.\n\n-r read only\n-c Allow file creation via upload\n-u run as USER\n-l Log to syslog (inetd mode requires this)\n\n"
#define HELP_tftp "usage: tftp [OPTIONS] HOST [PORT]\n\nTransfer file from/to tftp server.\n\n-l FILE Local FILE\n-r FILE Remote FILE\n-g Get file\n-p Put file\n-b SIZE Transfer blocks of SIZE octets(8 <= SIZE <= 65464)\n\n"
#define HELP_dhcpd "usage: dhcpd [-46fS] [-i IFACE] [-P N] [CONFFILE]\n\n -f Run in foreground\n -i Interface to use\n -S Log to syslog too\n -P N Use port N (default ipv4 67, ipv6 547)\n -4, -6 Run as a DHCPv4 or DHCPv6 server\n\n"
-#define HELP_dhcp "usage: dhcp [-fbnqvoCRB] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n [-H HOSTNAME] [-V VENDOR] [-x OPT:VAL] [-O OPT]\n\n Configure network dynamicaly using DHCP.\n\n -i Interface to use (default eth0)\n -p Create pidfile\n -s Run PROG at DHCP events (default /usr/share/dhcp/default.script)\n -B Request broadcast replies\n -t Send up to N discover packets\n -T Pause between packets (default 3 seconds)\n -A Wait N seconds after failure (default 20)\n -f Run in foreground\n -b Background if lease is not obtained\n -n Exit if lease is not obtained\n -q Exit after obtaining lease\n -R Release IP on exit\n -S Log to syslog too\n -a Use arping to validate offered address\n -O Request option OPT from server (cumulative)\n -o Don't request any options (unless -O is given)\n -r Request this IP address\n -x OPT:VAL Include option OPT in sent packets (cumulative)\n -F Ask server to update DNS mapping for NAME\n -H Send NAME as client hostname (default none)\n -V VENDOR Vendor identifier (default 'toybox VERSION')\n -C Don't send MAC as client identifier\n -v Verbose\n\n Signals:\n USR1 Renew current lease\n USR2 Release current lease\n\n\n"
-
#define HELP_dhcp6 "usage: dhcp6 [-fbnqvR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n\n Configure network dynamicaly using DHCP.\n\n -i Interface to use (default eth0)\n -p Create pidfile\n -s Run PROG at DHCP events\n -t Send up to N Solicit packets\n -T Pause between packets (default 3 seconds)\n -A Wait N seconds after failure (default 20)\n -f Run in foreground\n -b Background if lease is not obtained\n -n Exit if lease is not obtained\n -q Exit after obtaining lease\n -R Release IP on exit\n -S Log to syslog too\n -r Request this IP address\n -v Verbose\n\n Signals:\n USR1 Renew current lease\n USR2 Release current lease\n\n"
+#define HELP_dhcp "usage: dhcp [-fbnqvoCRB] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n [-H HOSTNAME] [-V VENDOR] [-x OPT:VAL] [-O OPT]\n\n Configure network dynamicaly using DHCP.\n\n -i Interface to use (default eth0)\n -p Create pidfile\n -s Run PROG at DHCP events (default /usr/share/dhcp/default.script)\n -B Request broadcast replies\n -t Send up to N discover packets\n -T Pause between packets (default 3 seconds)\n -A Wait N seconds after failure (default 20)\n -f Run in foreground\n -b Background if lease is not obtained\n -n Exit if lease is not obtained\n -q Exit after obtaining lease\n -R Release IP on exit\n -S Log to syslog too\n -a Use arping to validate offered address\n -O Request option OPT from server (cumulative)\n -o Don't request any options (unless -O is given)\n -r Request this IP address\n -x OPT:VAL Include option OPT in sent packets (cumulative)\n -F Ask server to update DNS mapping for NAME\n -H Send NAME as client hostname (default none)\n -V VENDOR Vendor identifier (default 'toybox VERSION')\n -C Don't send MAC as client identifier\n -v Verbose\n\n Signals:\n USR1 Renew current lease\n USR2 Release current lease\n\n\n"
+
#define HELP_dd "usage: dd [if=FILE] [of=FILE] [ibs=N] [obs=N] [bs=N] [count=N] [skip=N]\n [seek=N] [conv=notrunc|noerror|sync|fsync] [status=noxfer|none]\n\nOptions:\nif=FILE Read from FILE instead of stdin\nof=FILE Write to FILE instead of stdout\nbs=N Read and write N bytes at a time\nibs=N Read N bytes at a time\nobs=N Write N bytes at a time\ncount=N Copy only N input blocks\nskip=N Skip N input blocks\nseek=N Skip N output blocks\nconv=notrunc Don't truncate output file\nconv=noerror Continue after read errors\nconv=sync Pad blocks with zeros\nconv=fsync Physically write data out before finishing\nstatus=noxfer Don't show transfer rate\nstatus=none Don't show transfer rate or records in/out\n\nNumbers may be suffixed by c (*1), w (*2), b (*512), kD (*1000), k (*1024),\nMD (*1000*1000), M (*1024*1024), GD (*1000*1000*1000) or G (*1024*1024*1024).\n\n"
#define HELP_crontab "usage: crontab [-u user] FILE\n [-u user] [-e | -l | -r]\n [-c dir]\n\nFiles used to schedule the execution of programs.\n\n-c crontab dir\n-e edit user's crontab\n-l list user's crontab\n-r delete user's crontab\n-u user\nFILE Replace crontab by FILE ('-': stdin)\n\n"
OSDN Git Service
