/*
* Wireless Tools
*
- * Jean II - HPLB 97->99 - HPL 99->00
+ * Jean II - HPLB 97->99 - HPL 99->07
*
* Main code for "iwconfig". This is the generic tool for most
* manipulations...
* You need to link this code against "iwlib.c" and "-lm".
*
* This file is released under the GPL license.
- * Copyright (c) 1997-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes <jt@hpl.hp.com>
*/
-#include "iwlib.h" /* Header */
+#include "iwlib-private.h" /* Private header */
+
+/************************** DOCUMENTATION **************************/
+
+/*
+ * BASIC PRINCIPLE
+ * ---------------
+ * Wireless Extension recognise that each wireless device has some
+ * specific features not covered by the standard wireless extensions.
+ * Private wireless ioctls/requests allow a device to export the control
+ * of those device specific features, and allow users to directly interact
+ * with your driver.
+ * There are many other ways you can implement such functionality :
+ * o module parameters
+ * o netlink socket
+ * o file system (/proc/ or /sysfs/)
+ * o extra character device (/dev/)
+ * Private wireless ioctls is one of the simplest implementation,
+ * however it is limited, so you may want to check the alternatives.
+ *
+ * Like for standard Wireless Extensions, each private wireless
+ * request is identified by an IOCTL NUMBER and carry a certain number
+ * of arguments (SET or GET).
+ * The driver exports a description of those requests (ioctl number,
+ * request name, set and get arguments). Then, iwpriv uses those request
+ * descriptions to call the appropriate request and handle the
+ * arguments.
+ *
+ * IOCTL RANGES :
+ * ------------
+ * The initial implementation of iwpriv was using the SIOCDEVPRIVATE
+ * ioctl range (up to 16 ioctls - driver specific). However, this was
+ * causing some compatibility problems with other usages of those
+ * ioctls, and those ioctls are supposed to be removed.
+ * Therefore, I created a new ioctl range, at SIOCIWFIRSTPRIV. Those
+ * ioctls are specific to Wireless Extensions, so you don't have to
+ * worry about collisions with other usages. On the other hand, in the
+ * new range, the SET convention is enforced (see below).
+ * The differences are : SIOCDEVPRIVATE SIOCIWFIRSTPRIV
+ * o availability <= 2.5.X WE > 11 (>= 2.4.13)
+ * o collisions yes no
+ * o SET convention optional enforced
+ * o number 16 32
+ *
+ * NEW DRIVER API :
+ * --------------
+ * Wireless Extension 13 introduces a new driver API. Wireless
+ * Extensions requests can be handled via a iw_handler table instead
+ * of through the regular ioctl handler.
+ * The new driver API can be handled only with the new ioctl range
+ * and enforces the GET convention (see below).
+ * The differences are : old API new API
+ * o handler do_ioctl() struct iw_handler_def
+ * o SIOCIWFIRSTPRIV WE > 11 yes
+ * o SIOCDEVPRIVATE yes no
+ * o GET convention optional enforced
+ * Note that the new API before Wireless Extension 15 contains bugs
+ * when handling sub-ioctls and addr/float data types.
+ *
+ * INLINING vs. POINTER :
+ * --------------------
+ * One of the tricky aspect of the old driver API is how the data
+ * is handled, which is how the driver is supposed to extract the data
+ * passed to it by iwpriv.
+ * 1) If the data has a fixed size (private ioctl definition
+ * has the flag IW_PRIV_SIZE_FIXED) and the byte size of the data is
+ * lower than 16 bytes, the data will be inlined. The driver can extract
+ * data in the field 'u.name' of the struct iwreq.
+ * 2) If the if the data doesn't have a fixed size or is larger than
+ * 16 bytes, the data is passed by pointer. struct iwreq contains a
+ * struct iwpoint with a user space pointer to the data. Appropriate
+ * copy_from/to_user() function should be used.
+ *
+ * With the new API, this is handled transparently, the data is
+ * always available as the fourth argument of the request handler
+ * (usually called 'extra').
+ *
+ * SET/GET CONVENTION :
+ * ------------------
+ * Simplistic summary :
+ * o even numbered ioctls are SET, restricted to root, and should not
+ * return arguments (get_args = 0).
+ * o odd numbered ioctls are GET, authorised to anybody, and should
+ * not expect any arguments (set_args = 0).
+ *
+ * The regular Wireless Extensions use the SET/GET convention, where
+ * the low order bit identify a SET (0) or a GET (1) request. The private
+ * Wireless Extension is not as restrictive, but still has some
+ * limitations.
+ * The new ioctl range enforces the SET convention : SET request will
+ * be available to root only and can't return any arguments. If you don't
+ * like that, just use every other two ioctl.
+ * The new driver API enforce the GET convention : GET request won't
+ * be able to accept any arguments (except if its fits within (union
+ * iwreq_data)). If you don't like that, you can either use the Token Index
+ * support or the old API (aka the ioctl handler).
+ * In any case, it's a good idea to not have ioctl with both SET
+ * and GET arguments. If the GET arguments doesn't fit within
+ * (union iwreq_data) and SET do, or vice versa, the current code in iwpriv
+ * won't work. One exception is if both SET and GET arguments fit within
+ * (union iwreq_data), this case should be handled safely in a GET
+ * request.
+ * If you don't fully understand those limitations, just follow the
+ * rules of the simplistic summary ;-)
+ *
+ * SUB-IOCTLS :
+ * ----------
+ * Wireless Extension 15 introduces sub-ioctls. For some applications,
+ * 32 ioctls is not enough, and this simple mechanism allows to increase
+ * the number of ioctls by adding a sub-ioctl index to some of the ioctls
+ * (so basically it's a two level addressing).
+ * One might argue that at the point, some other mechanisms might be
+ * better, like using a real filesystem abstraction (/proc, driverfs, ...),
+ * but sub-ioctls are simple enough and don't have much drawbacks (which
+ * means that it's a quick and dirty hack ;-).
+ *
+ * There are two slightly different variations of the sub-ioctl scheme :
+ * 1) If the payload fits within (union iwreq_data), the first int
+ * (4 bytes) is reserved as the sub-ioctl number and the regular payload
+ * shifted by 4 bytes. The handler must extract the sub-ioctl number,
+ * increment the data pointer and then use it in the usual way.
+ * 2) If the ioctl uses (struct iw_point), the sub-ioctl number is
+ * set in the flags member of the structure. In this case, the handler
+ * should simply get the sub-ioctl number from the flags and process the
+ * data in the usual way.
+ *
+ * Sub-ioctls are declared normally in the private definition table,
+ * with cmd (first arg) being the sub-ioctl number. Then, you should
+ * declare the real ioctl, which will process the sub-ioctls, with
+ * the SAME ARGUMENTS and a EMPTY NAME.
+ * Here's an example of how it could look like :
+ * --------------------------------------------
+ // --- sub-ioctls handlers ---
+ { 0x8BE0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" },
+ { 0x8BE1, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" },
+ // --- sub-ioctls definitions ---
+ { 1, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_param1" },
+ { 1, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_param1" },
+ { 2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_param2" },
+ { 2, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_param2" },
+ // --- Raw access to sub-ioctl handlers ---
+ { 0x8BE0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_paramN" },
+ { 0x8BE1, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_paramN" },
+ * --------------------------------------------
+ * And iwpriv should do the rest for you ;-)
+ *
+ * Note that versions of iwpriv up to v24 (included) expect at most
+ * 16 ioctls definitions and will likely crash when given more.
+ * There is no fix that I can see, apart from recommending your users
+ * to upgrade their Wireless Tools. Wireless Extensions 15 will check this
+ * condition, so another workaround is restricting those extra definitions
+ * to WE-15.
+ *
+ * Another problem is that the new API before Wireless Extension 15
+ * has a bug when passing fixed arguments of 12-15 bytes. It will
+ * try to get them inline instead of by pointer. You can fool the new API
+ * to do the right thing using fake ioctl definitions (but remember that
+ * you will be more likely to hit the limit of 16 ioctl definitions).
+ * To play safe, use the old-style ioctl handler before v15.
+ *
+ * NEW DATA TYPES (ADDR/FLOAT) :
+ * ---------------------------
+ * Wireless Tools 25 introduce two new data types, addr and float,
+ * corresponding to struct sockaddr and struct iwfreq.
+ * Those types are properly handled with Wireless Extensions 15.
+ * However, the new API before v15 won't handle them properly.
+ *
+ * The first problem is that the new API won't know their size, so
+ * it won't copy them. This can be workaround with a fake ioctl definition.
+ * The second problem is that a fixed single addr won't be inlined
+ * in struct iwreq and will be passed as a pointer. This is due to an
+ * off-by-one error, where all fixed data of 16 bytes is considered too
+ * big to fit in struct iwreq.
+ *
+ * For those reasons, I would recommend to use the ioctl handler
+ * before v15 when manipulating those data.
+ *
+ * TOKEN INDEX :
+ * -----------
+ * Token index is very similar to sub-ioctl. It allows the user
+ * to specify an integer index in front of a bunch of other arguments
+ * (addresses, strings, ...). It's specified in square brackets on the
+ * iwpriv command line before other arguments.
+ * > iwpriv eth0 [index] args...
+ * Token index works only when the data is passed as pointer, and
+ * is otherwise ignored. If your data would fit within struct iwreq, you
+ * should declare the command *without* IW_PRIV_SIZE_FIXED to force
+ * this to happen (and check arg number yourself).
+ * --------------------------------------------
+ // --- Commands that would fit in struct iwreq ---
+ { 0x8BE0, IW_PRIV_TYPE_ADDR | 1, 0, "set_param_with_token" },
+ // --- No problem here (bigger than struct iwreq) ---
+ { 0x8BE1, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 2, 0, "again" },
+ * --------------------------------------------
+ * The token index feature is pretty transparent, the token index
+ * will just be in the flags member of (struct iw_point). Default value
+ * (if the user doesn't specify it) will be 0. Token index itself will
+ * work with any version of Wireless Extensions.
+ * Token index is not compatible with sub-ioctl (both use the same
+ * field of struct iw_point). However, the token index can be used to offer
+ * raw access to the sub-ioctl handlers (if it uses struct iw_point) :
+ * --------------------------------------------
+ // --- sub-ioctls handler ---
+ { 0x8BE0, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "" },
+ // --- sub-ioctls definitions ---
+ { 0, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "setaddr" },
+ { 1, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "deladdr" },
+ // --- raw access with token index (+ iwreq workaround) ---
+ { 0x8BE0, IW_PRIV_TYPE_ADDR | 1, 0, "rawaddr" },
+ * --------------------------------------------
+ *
+ * Jean II
+ */
/**************************** CONSTANTS ****************************/
static const char * argtype[] = {
- " ", "byte", "char", "", "int ", "float" };
+ " ", "byte ", "char ", "", "int ", "float", "addr " };
/************************* MISC SUBROUTINES **************************/
iw_usage(void)
{
fprintf(stderr, "Usage: iwpriv interface [private-command [private-arguments]]\n");
- fprintf(stderr, " interface [roam {on|off}]\n");
- fprintf(stderr, " interface [port {ad-hoc|managed|N}]\n");
-}
-
-/************************ GENERIC FUNCTIONS *************************/
-
-/*------------------------------------------------------------------*/
-/*
- * Print on the screen in a neat fashion all the info we have collected
- * on a device.
- */
-static int
-print_priv_info(int skfd,
- char * ifname,
- char * args[],
- int count)
-{
- int k;
- iwprivargs priv[32];
- int n;
-
- /* Avoid "Unused parameter" warning */
- args = args; count = count;
-
- /* Read the private ioctls */
- n = iw_get_priv_info(skfd, ifname, priv);
-
- /* Is there any ? */
- if(n <= 0)
- {
- /* Could skip this message ? */
- fprintf(stderr, "%-8.8s no private ioctls.\n\n",
- ifname);
- }
- else
- {
- printf("%-8.8s Available private ioctl :\n", ifname);
- /* Print them all */
- for(k = 0; k < n; k++)
- printf(" %s (%X) : set %3d %s & get %3d %s\n",
- priv[k].name, priv[k].cmd,
- priv[k].set_args & IW_PRIV_SIZE_MASK,
- argtype[(priv[k].set_args & IW_PRIV_TYPE_MASK) >> 12],
- priv[k].get_args & IW_PRIV_SIZE_MASK,
- argtype[(priv[k].get_args & IW_PRIV_TYPE_MASK) >> 12]);
- printf("\n");
- }
- return(0);
}
/************************* SETTING ROUTINES **************************/
* Execute a private command on the interface
*/
static int
-set_private(int skfd, /* Socket */
- char * args[], /* Command line args */
- int count, /* Args count */
- char * ifname) /* Dev name */
+set_private_cmd(int skfd, /* Socket */
+ char * args[], /* Command line args */
+ int count, /* Args count */
+ char * ifname, /* Dev name */
+ char * cmdname, /* Command name */
+ iwprivargs * priv, /* Private ioctl description */
+ int priv_num) /* Number of descriptions */
{
- u_char buffer[1024];
- struct iwreq wrq;
- int i = 0; /* Start with first arg */
- int k;
- iwprivargs priv[16];
- int number;
+ struct iwreq wrq;
+ u_char buffer[4096]; /* Only that big in v25 and later */
+ int i = 0; /* Start with first command arg */
+ int k; /* Index in private description table */
int temp;
+ int subcmd = 0; /* sub-ioctl index */
+ int offset = 0; /* Space for sub-ioctl index */
- /* Read the private ioctls */
- number = iw_get_priv_info(skfd, ifname, priv);
-
- /* Is there any ? */
- if(number <= 0)
+ /* Check if we have a token index.
+ * Do it now so that sub-ioctl takes precedence, and so that we
+ * don't have to bother with it later on... */
+ if((count >= 1) && (sscanf(args[0], "[%i]", &temp) == 1))
{
- /* Could skip this message ? */
- fprintf(stderr, "%-8.8s no private ioctls.\n\n",
- ifname);
- return(-1);
+ subcmd = temp;
+ args++;
+ count--;
}
/* Search the correct ioctl */
k = -1;
- while((++k < number) && strcmp(priv[k].name, args[i]));
+ while((++k < priv_num) && strcmp(priv[k].name, cmdname));
/* If not found... */
- if(k == number)
+ if(k == priv_num)
{
- fprintf(stderr, "Invalid command : %s\n", args[i]);
+ fprintf(stderr, "Invalid command : %s\n", cmdname);
return(-1);
}
- /* Next arg */
- i++;
+ /* Watch out for sub-ioctls ! */
+ if(priv[k].cmd < SIOCDEVPRIVATE)
+ {
+ int j = -1;
+
+ /* Find the matching *real* ioctl */
+ while((++j < priv_num) && ((priv[j].name[0] != '\0') ||
+ (priv[j].set_args != priv[k].set_args) ||
+ (priv[j].get_args != priv[k].get_args)));
+
+ /* If not found... */
+ if(j == priv_num)
+ {
+ fprintf(stderr, "Invalid private ioctl definition for : %s\n",
+ cmdname);
+ return(-1);
+ }
+
+ /* Save sub-ioctl number */
+ subcmd = priv[k].cmd;
+ /* Reserve one int (simplify alignment issues) */
+ offset = sizeof(__u32);
+ /* Use real ioctl definition from now on */
+ k = j;
+
+#if 0
+ printf("<mapping sub-ioctl %s to cmd 0x%X-%d>\n", cmdname,
+ priv[k].cmd, subcmd);
+#endif
+ }
/* If we have to set some data */
if((priv[k].set_args & IW_PRIV_TYPE_MASK) &&
{
case IW_PRIV_TYPE_BYTE:
/* Number of args to fetch */
- wrq.u.data.length = count - 1;
+ wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
- for(; i < wrq.u.data.length + 1; i++) {
- sscanf(args[i], "%d", &temp);
- buffer[i - 1] = (char) temp;
+ for(; i < wrq.u.data.length; i++) {
+ sscanf(args[i], "%i", &temp);
+ buffer[i] = (char) temp;
}
break;
case IW_PRIV_TYPE_INT:
/* Number of args to fetch */
- wrq.u.data.length = count - 1;
+ wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
- for(; i < wrq.u.data.length + 1; i++)
- sscanf(args[i], "%d", ((u_int *) buffer) + i - 1);
+ for(; i < wrq.u.data.length; i++) {
+ sscanf(args[i], "%i", &temp);
+ ((__s32 *) buffer)[i] = (__s32) temp;
+ }
break;
case IW_PRIV_TYPE_CHAR:
}
break;
+ case IW_PRIV_TYPE_FLOAT:
+ /* Number of args to fetch */
+ wrq.u.data.length = count;
+ if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
+ wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
+
+ /* Fetch args */
+ for(; i < wrq.u.data.length; i++) {
+ double freq;
+ if(sscanf(args[i], "%lg", &(freq)) != 1)
+ {
+ printf("Invalid float [%s]...\n", args[i]);
+ return(-1);
+ }
+ if(strchr(args[i], 'G')) freq *= GIGA;
+ if(strchr(args[i], 'M')) freq *= MEGA;
+ if(strchr(args[i], 'k')) freq *= KILO;
+ sscanf(args[i], "%i", &temp);
+ iw_float2freq(freq, ((struct iw_freq *) buffer) + i);
+ }
+ break;
+
+ case IW_PRIV_TYPE_ADDR:
+ /* Number of args to fetch */
+ wrq.u.data.length = count;
+ if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
+ wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
+
+ /* Fetch args */
+ for(; i < wrq.u.data.length; i++) {
+ if(iw_in_addr(skfd, ifname, args[i],
+ ((struct sockaddr *) buffer) + i) < 0)
+ {
+ printf("Invalid address [%s]...\n", args[i]);
+ return(-1);
+ }
+ }
+ break;
+
default:
- fprintf(stderr, "Not yet implemented...\n");
+ fprintf(stderr, "Not implemented...\n");
return(-1);
}
if((priv[k].set_args & IW_PRIV_SIZE_FIXED) &&
(wrq.u.data.length != (priv[k].set_args & IW_PRIV_SIZE_MASK)))
{
- printf("The command %s need exactly %d argument...\n",
- priv[k].name, priv[k].set_args & IW_PRIV_SIZE_MASK);
+ printf("The command %s needs exactly %d argument(s)...\n",
+ cmdname, priv[k].set_args & IW_PRIV_SIZE_MASK);
return(-1);
}
} /* if args to set */
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
+ /* Those two tests are important. They define how the driver
+ * will have to handle the data */
if((priv[k].set_args & IW_PRIV_SIZE_FIXED) &&
- (iw_byte_size(priv[k].set_args) < IFNAMSIZ))
- memcpy(wrq.u.name, buffer, IFNAMSIZ);
+ ((iw_get_priv_size(priv[k].set_args) + offset) <= IFNAMSIZ))
+ {
+ /* First case : all SET args fit within wrq */
+ if(offset)
+ wrq.u.mode = subcmd;
+ memcpy(wrq.u.name + offset, buffer, IFNAMSIZ - offset);
+ }
else
{
- wrq.u.data.pointer = (caddr_t) buffer;
- wrq.u.data.flags = 0;
+ if((priv[k].set_args == 0) &&
+ (priv[k].get_args & IW_PRIV_SIZE_FIXED) &&
+ (iw_get_priv_size(priv[k].get_args) <= IFNAMSIZ))
+ {
+ /* Second case : no SET args, GET args fit within wrq */
+ if(offset)
+ wrq.u.mode = subcmd;
+ }
+ else
+ {
+ /* Third case : args won't fit in wrq, or variable number of args */
+ wrq.u.data.pointer = (caddr_t) buffer;
+ wrq.u.data.flags = subcmd;
+ }
}
/* Perform the private ioctl */
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Interface doesn't accept private ioctl...\n");
- fprintf(stderr, "%X: %s\n", priv[k].cmd, strerror(errno));
+ fprintf(stderr, "%s (%X): %s\n", cmdname, priv[k].cmd, strerror(errno));
return(-1);
}
int j;
int n = 0; /* number of args */
- printf("%-8.8s %s:", ifname, priv[k].name);
+ printf("%-8.16s %s:", ifname, cmdname);
+ /* Check where is the returned data */
if((priv[k].get_args & IW_PRIV_SIZE_FIXED) &&
- (iw_byte_size(priv[k].get_args) < IFNAMSIZ))
+ (iw_get_priv_size(priv[k].get_args) <= IFNAMSIZ))
{
memcpy(buffer, wrq.u.name, IFNAMSIZ);
n = priv[k].get_args & IW_PRIV_SIZE_MASK;
case IW_PRIV_TYPE_INT:
/* Display args */
for(j = 0; j < n; j++)
- printf("%d ", ((u_int *) buffer)[j]);
+ printf("%d ", ((__s32 *) buffer)[j]);
printf("\n");
break;
case IW_PRIV_TYPE_CHAR:
/* Display args */
- buffer[wrq.u.data.length - 1] = '\0';
+ buffer[n] = '\0';
printf("%s\n", buffer);
break;
+ case IW_PRIV_TYPE_FLOAT:
+ {
+ double freq;
+ /* Display args */
+ for(j = 0; j < n; j++)
+ {
+ freq = iw_freq2float(((struct iw_freq *) buffer) + j);
+ if(freq >= GIGA)
+ printf("%gG ", freq / GIGA);
+ else
+ if(freq >= MEGA)
+ printf("%gM ", freq / MEGA);
+ else
+ printf("%gk ", freq / KILO);
+ }
+ printf("\n");
+ }
+ break;
+
+ case IW_PRIV_TYPE_ADDR:
+ {
+ char scratch[128];
+ struct sockaddr * hwa;
+ /* Display args */
+ for(j = 0; j < n; j++)
+ {
+ hwa = ((struct sockaddr *) buffer) + j;
+ if(j)
+ printf(" %.*s",
+ (int) strlen(cmdname), " ");
+ printf("%s\n", iw_saether_ntop(hwa, scratch));
+ }
+ }
+ break;
+
default:
fprintf(stderr, "Not yet implemented...\n");
return(-1);
return(0);
}
+/*------------------------------------------------------------------*/
+/*
+ * Execute a private command on the interface
+ */
+static inline int
+set_private(int skfd, /* Socket */
+ char * args[], /* Command line args */
+ int count, /* Args count */
+ char * ifname) /* Dev name */
+{
+ iwprivargs * priv;
+ int number; /* Max of private ioctl */
+ int ret;
+
+ /* Read the private ioctls */
+ number = iw_get_priv_info(skfd, ifname, &priv);
+
+ /* Is there any ? */
+ if(number <= 0)
+ {
+ /* Should I skip this message ? */
+ fprintf(stderr, "%-8.16s no private ioctls.\n\n",
+ ifname);
+ if(priv)
+ free(priv);
+ return(-1);
+ }
+
+ /* Do it */
+ ret = set_private_cmd(skfd, args + 1, count - 1, ifname, args[0],
+ priv, number);
+
+ free(priv);
+ return(ret);
+}
+
+/************************ CATALOG FUNCTIONS ************************/
+
+/*------------------------------------------------------------------*/
+/*
+ * Print on the screen in a neat fashion the list of private ioctls
+ * for the device.
+ */
+static int
+print_priv_info(int skfd,
+ char * ifname,
+ char * args[],
+ int count)
+{
+ int k;
+ iwprivargs * priv;
+ int n;
+
+ /* Avoid "Unused parameter" warning */
+ args = args; count = count;
+
+ /* Read the private ioctls */
+ n = iw_get_priv_info(skfd, ifname, &priv);
+
+ /* Is there any ? */
+ if(n <= 0)
+ {
+ /* Should I skip this message ? */
+ fprintf(stderr, "%-8.16s no private ioctls.\n\n",
+ ifname);
+ }
+ else
+ {
+ printf("%-8.16s Available private ioctls :\n", ifname);
+ /* Print them all */
+ for(k = 0; k < n; k++)
+ if(priv[k].name[0] != '\0')
+ printf(" %-16.16s (%.4X) : set %3d %s & get %3d %s\n",
+ priv[k].name, priv[k].cmd,
+ priv[k].set_args & IW_PRIV_SIZE_MASK,
+ argtype[(priv[k].set_args & IW_PRIV_TYPE_MASK) >> 12],
+ priv[k].get_args & IW_PRIV_SIZE_MASK,
+ argtype[(priv[k].get_args & IW_PRIV_TYPE_MASK) >> 12]);
+ printf("\n");
+ }
+
+ /* Cleanup */
+ if(priv)
+ free(priv);
+ return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Print on the screen in a neat fashion the list of private GET ioctl
+ * data for the device and data returned by those.
+ */
+static int
+print_priv_all(int skfd,
+ char * ifname,
+ char * args[],
+ int count)
+{
+ int k;
+ iwprivargs * priv;
+ int n;
+
+ /* Avoid "Unused parameter" warning */
+ args = args; count = count;
+
+ /* Read the private ioctls */
+ n = iw_get_priv_info(skfd, ifname, &priv);
+
+ /* Is there any ? */
+ if(n <= 0)
+ {
+ /* Should I skip this message ? */
+ fprintf(stderr, "%-8.16s no private ioctls.\n\n",
+ ifname);
+ }
+ else
+ {
+ printf("%-8.16s Available read-only private ioctl :\n", ifname);
+ /* Print them all */
+ for(k = 0; k < n; k++)
+ /* We call all ioctls that don't have a null name, don't require
+ * args and return some (avoid triggering "reset" commands) */
+ if((priv[k].name[0] != '\0') && (priv[k].set_args == 0) &&
+ (priv[k].get_args != 0))
+ set_private_cmd(skfd, NULL, 0, ifname, priv[k].name,
+ priv, n);
+ printf("\n");
+ }
+
+ /* Cleanup */
+ if(priv)
+ free(priv);
+ return(0);
+}
+
/********************** PRIVATE IOCTLS MANIPS ***********************/
/*
* Convenient access to some private ioctls of some devices
*/
+#if 0
/*------------------------------------------------------------------*/
/*
* Set roaming mode on and off
* Found in wavelan_cs driver
+ * Note : this is obsolete, most 802.11 devices should use the
+ * SIOCSIWAP request.
*/
static int
set_roaming(int skfd, /* Socket */
struct iwreq wrq;
int i = 0; /* Start with first arg */
int k;
- iwprivargs priv[16];
+ iwprivargs * priv;
int number;
+ int roamcmd;
char RoamState; /* buffer to hold new roam state */
char ChangeRoamState=0; /* whether or not we are going to
change roam states */
/* Read the private ioctls */
- number = iw_get_priv_info(skfd, ifname, priv);
+ number = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(number <= 0)
{
- /* Could skip this message ? */
- fprintf(stderr, "%-8.8s no private ioctls.\n\n",
+ /* Should I skip this message ? */
+ fprintf(stderr, "%-8.16s no private ioctls.\n\n",
ifname);
+ if(priv)
+ free(priv);
return(-1);
}
+ /* Get the ioctl number */
+ k = -1;
+ while((++k < number) && strcmp(priv[k].name, "setroam"));
+ if(k == number)
+ {
+ fprintf(stderr, "This device doesn't support roaming\n");
+ free(priv);
+ return(-1);
+ }
+ roamcmd = priv[k].cmd;
+
+ /* Cleanup */
+ free(priv);
+
if(count != 1)
{
iw_usage();
if(!strcasecmp(args[i], "on"))
{
- printf("%-8.8s enable roaming\n", ifname);
+ printf("%-8.16s enable roaming\n", ifname);
if(!number)
{
fprintf(stderr, "This device doesn't support roaming\n");
if(!strcasecmp(args[i], "off"))
{
i++;
- printf("%-8.8s disable roaming\n", ifname);
+ printf("%-8.16s disable roaming\n", ifname);
if(!number)
{
fprintf(stderr, "This device doesn't support roaming\n");
if(ChangeRoamState)
{
- k = -1;
- while((++k < number) && strcmp(priv[k].name, "setroam"));
- if(k == number)
- {
- fprintf(stderr, "This device doesn't support roaming\n");
- return(-1);
- }
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
buffer[0]=RoamState;
memcpy(wrq.u.name, &buffer, IFNAMSIZ);
- if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
+ if(ioctl(skfd, roamcmd, &wrq) < 0)
{
fprintf(stderr, "Roaming support is broken.\n");
return(-1);
/*
* Get and set the port type
* Found in wavelan2_cs and wvlan_cs drivers
+ * TODO : Add support for HostAP ?
*/
static int
port_type(int skfd, /* Socket */
struct iwreq wrq;
int i = 0; /* Start with first arg */
int k;
- iwprivargs priv[16];
+ iwprivargs * priv;
int number;
char ptype = 0;
char * modes[] = { "invalid", "managed (BSS)", "reserved", "ad-hoc" };
/* Read the private ioctls */
- number = iw_get_priv_info(skfd, ifname, priv);
+ number = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(number <= 0)
{
- /* Could skip this message ? */
- fprintf(stderr, "%-8.8s no private ioctls.\n\n", ifname);
+ /* Should I skip this message ? */
+ fprintf(stderr, "%-8.16s no private ioctls.\n\n", ifname);
+ if(priv)
+ free(priv);
return(-1);
}
if(k == number)
{
fprintf(stderr, "This device doesn't support getting port type\n");
- return(-1);
+ goto err;
}
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Port type support is broken.\n");
- exit(0);
+ goto err;
}
ptype = *wrq.u.name;
/* Display it */
- printf("%-8.
8s Current port mode is %s <port type is %d>.\n\n",
+ printf("%-8.
16s Current port mode is %s <port type is %d>.\n\n",
ifname, modes[(int) ptype], ptype);
+ free(priv);
return(0);
}
if(count != 1)
{
iw_usage();
- return(-1);
+ goto err;
}
/* Read it */
ptype = k;
else
/* ...or as an integer */
- if(sscanf(args[i], "%d", (int *) &ptype) != 1)
+ if(sscanf(args[i], "%i", (int *) &ptype) != 1)
{
iw_usage();
- return(-1);
+ goto err;
}
k = -1;
if(k == number)
{
fprintf(stderr, "This device doesn't support setting port type\n");
- return(-1);
+ goto err;
}
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Invalid port type (or setting not allowed)\n");
- return(-1);
+ goto err;
}
+ free(priv);
return(0);
+
+ err:
+ free(priv);
+ return(-1);
}
+#endif
/******************************* MAIN ********************************/
return(-1);
}
- /* No argument : show the list of all device + info */
+ /* No argument : show the list of all devices + ioctl list */
if(argc == 1)
iw_enum_devices(skfd, &print_priv_info, NULL, 0);
else
/* Special cases take one... */
- /* Help */
- if((!strncmp(argv[1], "-h", 9)) ||
- (!strcmp(argv[1], "--help")))
- iw_usage();
+ /* All */
+ if((!strncmp(argv[1], "-a", 2)) || (!strcmp(argv[1], "--all")))
+ iw_enum_devices(skfd, &print_priv_all, NULL, 0);
else
- /* The device name must be the first argument */
- /* Name only : show for that device only */
- if(argc == 2)
- print_priv_info(skfd, argv[1], NULL, 0);
+ /* Help */
+ if((!strncmp(argv[1], "-h", 2)) || (!strcmp(argv[1], "--help")))
+ iw_usage();
else
- /* Special cases take two... */
- /* Roaming */
- if(!strncmp(argv[2], "roam", 4))
- goterr = set_roaming(skfd, argv + 3, argc - 3, argv[1]);
+ /* Version */
+ if (!strcmp(argv[1], "-v") || !strcmp(argv[1], "--version"))
+ goterr = iw_print_version_info("iwpriv");
else
- /* Port type */
- if(!strncmp(argv[2], "port", 4))
- goterr = port_type(skfd, argv + 3, argc - 3, argv[1]);
+ /* The device name must be the first argument */
+ /* Name only : show for that device only */
+ if(argc == 2)
+ print_priv_info(skfd, argv[1], NULL, 0);
else
- /* Otherwise, it's a private ioctl */
- goterr = set_private(skfd, argv + 2, argc - 2, argv[1]);
+ /* Special cases take two... */
+ /* All */
+ if((!strncmp(argv[2], "-a", 2)) ||
+ (!strcmp(argv[2], "--all")))
+ print_priv_all(skfd, argv[1], NULL, 0);
+ else
+#if 0
+ /* Roaming */
+ if(!strncmp(argv[2], "roam", 4))
+ goterr = set_roaming(skfd, argv + 3, argc - 3, argv[1]);
+ else
+ /* Port type */
+ if(!strncmp(argv[2], "port", 4))
+ goterr = port_type(skfd, argv + 3, argc - 3, argv[1]);
+ else
+#endif
+ /*-------------*/
+ /* Otherwise, it's a private ioctl */
+ goterr = set_private(skfd, argv + 2, argc - 2, argv[1]);
/* Close the socket. */
- close(skfd);
+ iw_sockets_close(skfd);
return(goterr);
}
OSDN Git Service
