extern "C" {
#endif
-#ifdef __GNUC__
+#if defined(__GNUC__) && !defined(__COVERITY__)
#define va_deprecated __attribute__((deprecated))
#if __GNUC__ >= 6
#define va_deprecated_enum va_deprecated
*
* VA-API is split into several modules:
* - \ref api_core
- * - \ref api_enc_xxx (xxx = h264, hevc, jpec, mpeg2, vp8, vp9)
- * - \ref api_dec_xxx (xxx = hevc, jpec, vp8, vp9)
+ * - Encoder (H264, HEVC, JPEG, MPEG2, VP8, VP9)
+ * - \ref api_enc_h264
+ * - \ref api_enc_hevc
+ * - \ref api_enc_jpeg
+ * - \ref api_enc_mpeg2
+ * - \ref api_enc_vp8
+ * - \ref api_enc_vp9
+ * - Decoder (HEVC, JPEG, VP8, VP9)
+ * - \ref api_dec_hevc
+ * - \ref api_dec_jpeg
+ * - \ref api_dec_vp8
+ * - \ref api_dec_vp9
* - \ref api_vpp
+ * - FEI (H264, HEVC)
+ * - \ref api_fei
+ * - \ref api_fei_h264
+ * - \ref api_fei_hevc
*/
/**
#define VA_STATUS_ERROR_HW_BUSY 0x00000022
/** \brief An unsupported memory type was supplied. */
#define VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE 0x00000024
+/** \brief Indicate allocated buffer size is not enough for input or output. */
+#define VA_STATUS_ERROR_NOT_ENOUGH_BUFFER 0x00000025
#define VA_STATUS_ERROR_UNKNOWN 0xFFFFFFFF
/** De-interlacing flags for vaPutSurface() */
VAProfileVP9Profile0 = 19,
VAProfileVP9Profile1 = 20,
VAProfileVP9Profile2 = 21,
- VAProfileVP9Profile3 = 22
+ VAProfileVP9Profile3 = 22,
+ VAProfileHEVCMain12 = 23,
+ VAProfileHEVCMain422_10 = 24,
+ VAProfileHEVCMain422_12 = 25,
+ VAProfileHEVCMain444 = 26,
+ VAProfileHEVCMain444_10 = 27,
+ VAProfileHEVCMain444_12 = 28,
+ VAProfileHEVCSccMain = 29,
+ VAProfileHEVCSccMain10 = 30,
+ VAProfileHEVCSccMain444 = 31
} VAProfile;
/**
* (VAEncFEIMVBufferType, VAEncFEIMBModeBufferType) are needed for PAK input.
**/
VAEntrypointFEI = 11,
+ /**
+ * \brief VAEntrypointStats
+ *
+ * A pre-processing function for getting some statistics and motion vectors is added,
+ * and some extra controls for Encode pipeline are provided. The application can
+ * optionally call the statistics function to get motion vectors and statistics like
+ * variances, distortions before calling Encode function via this entry point.
+ *
+ * Checking whether Statistics is supported can be performed with vaQueryConfigEntrypoints().
+ * If Statistics entry point is supported, then the list of returned entry-points will
+ * include #VAEntrypointStats. Supported pixel format, maximum resolution and statistics
+ * specific attributes can be obtained via normal attribute query. One input buffer
+ * (VAStatsStatisticsParameterBufferType) and one or two output buffers
+ * (VAStatsStatisticsBufferType, VAStatsStatisticsBottomFieldBufferType (for interlace only)
+ * and VAStatsMVBufferType) are needed for this entry point.
+ **/
+ VAEntrypointStats = 12,
} VAEntrypoint;
/** Currently defined configuration attribute types */
* VAConfigAttribValDecJPEG union.
*/
VAConfigAttribDecJPEG = 7,
+ /**
+ * \brief Decode processing support. Read/write.
+ *
+ * This attribute determines if the driver supports video processing
+ * with decoding using the decoding context in a single call, through
+ * vaGetConfigAttributes(); and if the user may use this feature,
+ * through vaCreateConfig(), if the driver supports the user scenario.
+ * The user will essentially create a regular decode VAContext. Therefore,
+ * the parameters of vaCreateContext() such as picture_width, picture_height
+ * and render_targets are in relation to the decode output parameters
+ * (not processing output parameters) as normal.
+ * If this attribute is not set by the user then it is assumed that no
+ * extra processing is done after decoding for this decode context.
+ *
+ * Since essentially the application is creating a decoder config and context,
+ * all function calls that take in the config (e.g. vaQuerySurfaceAttributes())
+ * or context are in relation to the decoder, except those video processing
+ * function specified in the next paragraph.
+ *
+ * Once the decode config and context are created, the user must further
+ * query the supported processing filters using vaQueryVideoProcFilters(),
+ * vaQueryVideoProcFilterCaps(), vaQueryVideoProcPipelineCaps() by specifying
+ * the created decode context. The user must provide processing information
+ * and extra processing output surfaces as "additional_outputs" to the driver
+ * through VAProcPipelineParameterBufferType. The render_target specified
+ * at vaBeginPicture() time refers to the decode output surface. The
+ * target surface for the output of processing needs to be a different
+ * surface since the decode process requires the original reconstructed buffer.
+ * The “surface” member of VAProcPipelineParameterBuffer should be set to the
+ * same as “render_target” set in vaBeginPicture(), but the driver may choose
+ * to ignore this parameter.
+ */
+ VAConfigAttribDecProcessing = 8,
/** @name Attributes for encoding */
/**@{*/
/**
* If it is supported,for VP9, suggested frame resolution can be retrieved from VACodedBufferVP9Status.
*/
VAConfigAttribEncDynamicScaling = 30,
-
- /**
+ /**
+ * \brief frame size tolerance support
+ * it indicates the tolerance of frame size
+ */
+ VAConfigAttribFrameSizeToleranceSupport = 31,
+ /**
* \brief Encode function type for FEI.
*
* This attribute conveys whether the driver supports different function types for encode.
* it is for FEI entry point only.
* Default is VA_FEI_FUNCTION_ENC_PAK.
*/
- VAConfigAttribFEIFunctionType = 32,
+ VAConfigAttribFEIFunctionType = 32,
/**
* \brief Maximum number of FEI MV predictors. Read-only.
*
* Currently it is for FEI entry point only.
*/
VAConfigAttribFEIMVPredictors = 33,
+ /**
+ * \brief Statistics attribute. Read-only.
+ *
+ * This attribute exposes a number of capabilities of the VAEntrypointStats entry
+ * point. The attribute value is partitioned into fields as defined in the
+ * VAConfigAttribValStats union. Currently it is for VAEntrypointStats only.
+ */
+ VAConfigAttribStats = 34,
+ /**
+ * \brief Tile Support Attribute. Read-only.
+ *
+ * This attribute conveys whether encoder is capable to support tiles.
+ * If not supported, the tile related parameters sent to encoder, such as
+ * tiling structure, should be ignored. 0 - unsupported, 1 - supported.
+ */
+ VAConfigAttribEncTileSupport = 35,
+ /**
+ * \brief whether accept rouding setting from application. Read-only.
+ * This attribute is for encode quality, if it is report,
+ * application can change the rounding setting by VAEncMiscParameterTypeCustomRoundingControl
+ */
+ VAConfigAttribCustomRoundingControl = 36,
+ /**
+ * \brief Encoding QP info block size attribute. Read-only.
+ * This attribute conveys the block sizes that underlying driver
+ * support for QP info for buffer #VAEncQpBuffer.
+ */
+ VAConfigAttribQPBlockSize = 37,
/**@}*/
VAConfigAttribTypeMax
} VAConfigAttribType;
uint32_t value; /* OR'd flags (bits) for this attribute */
} VAConfigAttrib;
-/** attribute value for VAConfigAttribRTFormat */
-#define VA_RT_FORMAT_YUV420 0x00000001
-#define VA_RT_FORMAT_YUV422 0x00000002
-#define VA_RT_FORMAT_YUV444 0x00000004
-#define VA_RT_FORMAT_YUV411 0x00000008
-#define VA_RT_FORMAT_YUV400 0x00000010
-/** YUV formats with more than 8 bpp */
-#define VA_RT_FORMAT_YUV420_10BPP 0x00000100
-/** RGB formats */
-#define VA_RT_FORMAT_RGB16 0x00010000
-#define VA_RT_FORMAT_RGB32 0x00020000
-/* RGBP covers RGBP and BGRP fourcc */
-#define VA_RT_FORMAT_RGBP 0x00100000
-/**
- * RGB 10-bit packed format with upper 2 bits as alpha channel.
- * The existing pre-defined fourcc codes can be used to signal
- * the position of each component for this RT format.
- */
-#define VA_RT_FORMAT_RGB32_10BPP 0x00200000
+/* Attribute values for VAConfigAttribRTFormat. */
+
+#define VA_RT_FORMAT_YUV420 0x00000001 ///< YUV 4:2:0 8-bit.
+#define VA_RT_FORMAT_YUV422 0x00000002 ///< YUV 4:2:2 8-bit.
+#define VA_RT_FORMAT_YUV444 0x00000004 ///< YUV 4:4:4 8-bit.
+#define VA_RT_FORMAT_YUV411 0x00000008 ///< YUV 4:1:1 8-bit.
+#define VA_RT_FORMAT_YUV400 0x00000010 ///< Greyscale 8-bit.
+#define VA_RT_FORMAT_YUV420_10 0x00000100 ///< YUV 4:2:0 10-bit.
+#define VA_RT_FORMAT_YUV422_10 0x00000200 ///< YUV 4:2:2 10-bit.
+#define VA_RT_FORMAT_YUV444_10 0x00000400 ///< YUV 4:4:4 10-bit.
+#define VA_RT_FORMAT_YUV420_12 0x00001000 ///< YUV 4:2:0 12-bit.
+#define VA_RT_FORMAT_YUV422_12 0x00002000 ///< YUV 4:2:2 12-bit.
+#define VA_RT_FORMAT_YUV444_12 0x00004000 ///< YUV 4:4:4 12-bit.
+
+#define VA_RT_FORMAT_RGB16 0x00010000 ///< Packed RGB, 16 bits per pixel.
+#define VA_RT_FORMAT_RGB32 0x00020000 ///< Packed RGB, 32 bits per pixel, 8 bits per colour sample.
+#define VA_RT_FORMAT_RGBP 0x00100000 ///< Planar RGB, 8 bits per sample.
+#define VA_RT_FORMAT_RGB32_10 0x00200000 ///< Packed RGB, 32 bits per pixel, 10 bits per colour sample.
+
#define VA_RT_FORMAT_PROTECTED 0x80000000
+#define VA_RT_FORMAT_RGB32_10BPP VA_RT_FORMAT_RGB32_10 ///< @deprecated use VA_RT_FORMAT_RGB32_10 instead.
+#define VA_RT_FORMAT_YUV420_10BPP VA_RT_FORMAT_YUV420_10 ///< @deprecated use VA_RT_FORMAT_YUV420_10 instead.
+
/** @name Attribute values for VAConfigAttribRateControl */
/**@{*/
/** \brief Driver does not support any form of rate control. */
* simultaneously. And BRC would adjust accordingly. This is so called
* Parallel BRC. */
#define VA_RC_PARALLEL 0x00000200
+/** \brief Quality defined VBR
+ * Use Quality factor to determine the good enough QP for each MB such that
+ * good enough quality can be obtained without waste of bits
+ * for this BRC mode, you must set all legacy VBR parameters
+ * and reuse quality_factor in \c VAEncMiscParameterRateControl
+ * */
+#define VA_RC_QVBR 0x00000400
+/** \brief Average VBR
+ * Average variable bitrate control algorithm focuses on overall encoding
+ * quality while meeting the specified target bitrate, within the accuracy
+ * range, after a convergence period.
+ * bits_per_second in VAEncMiscParameterRateControl is target bitrate for AVBR.
+ * Convergence is specified in the unit of frame.
+ * window_size in VAEncMiscParameterRateControl is equal to convergence for AVBR.
+ * Accuracy is in the range of [1,100], 1 means one percent, and so on.
+ * target_percentage in VAEncMiscParameterRateControl is equal to accuracy for AVBR. */
+#define VA_RC_AVBR 0x00000800
/**@}*/
uint32_t value;
uint32_t va_reserved[VA_PADDING_LOW];
} VAConfigAttribValDecJPEG;
+/** @name Attribute values for VAConfigAttribDecProcessing */
+/**@{*/
+/** \brief No decoding + processing in a single decoding call. */
+#define VA_DEC_PROCESSING_NONE 0x00000000
+/** \brief Decode + processing in a single decoding call. */
+#define VA_DEC_PROCESSING 0x00000001
/**@}*/
/** @name Attribute values for VAConfigAttribEncPackedHeaders */
#define VA_SURFACE_ATTRIB_USAGE_HINT_VPP_WRITE 0x00000008
/** \brief Surface used for display. */
#define VA_SURFACE_ATTRIB_USAGE_HINT_DISPLAY 0x00000010
+/** \brief Surface used for export to third-party APIs, e.g. via
+ * vaExportSurfaceHandle(). */
+#define VA_SURFACE_ATTRIB_USAGE_HINT_EXPORT 0x00000020
/**@}*/
VAEncFEIDistortionBufferType = 45,
VAEncFEIMBControlBufferType = 46,
VAEncFEIMVPredictorBufferType = 47,
+ VAStatsStatisticsParameterBufferType = 48,
+ /** \brief Statistics output for VAEntrypointStats progressive and top field of interlaced case*/
+ VAStatsStatisticsBufferType = 49,
+ /** \brief Statistics output for VAEntrypointStats bottom field of interlaced case*/
+ VAStatsStatisticsBottomFieldBufferType = 50,
+ VAStatsMVBufferType = 51,
+ VAStatsMVPredictorBufferType = 52,
+ /** Force MB's to be non skip for encode.it's per-mb control buffer, The width of the MB map
+ * Surface is (width of the Picture in MB unit) * 1 byte, multiple of 64 bytes.
+ * The height is (height of the picture in MB unit). The picture is either
+ * frame or non-interleaved top or bottom field. If the application provides this
+ *surface, it will override the "skipCheckDisable" setting in VAEncMiscParameterEncQuality.
+ */
+ VAEncMacroblockDisableSkipMapBufferType = 53,
+ /**
+ * \brief HEVC FEI CTB level cmd buffer
+ * it is CTB level information for future usage.
+ */
+ VAEncFEICTBCmdBufferType = 54,
+ /**
+ * \brief HEVC FEI CU level data buffer
+ * it's CTB level information for future usage
+ */
+ VAEncFEICURecordBufferType = 55,
+ /** decode stream out buffer, intermedia data of decode, it may include MV, MB mode etc.
+ * it can be used to detect motion and analyze the frame contain */
+ VADecodeStreamoutBufferType = 56,
+
+ /** \brief HEVC Decoding Subset Parameter buffer type
+ *
+ * The subsets parameter buffer is concatenation with one or multiple
+ * subset entry point offsets. All the offset values are layed out one
+ * by one according to slice order with first slice segment first, second
+ * slice segment second, etc... The entry number is indicated by parameter
+ * \ref num_entry_point_offsets. And the first entry position of the entry
+ * point offsets for any slice segment is indicated by parameter
+ * entry_offset_to_subset_array in VAPictureParameterBufferHEVC data structure.
+ */
+ VASubsetsParameterBufferType = 57,
+
VABufferTypeMax
} VABufferType;
* This function queries the processing rate based on parameters in
* \c proc_buf for the given \c config. Upon successful return, the processing
* rate value will be stored in \c processing_rate. Processing rate is
- * specified as the number of macroblocks per second.
+ * specified as the number of macroblocks/CTU per second.
*
* If NULL is passed to the \c proc_buf, the default processing rate for the
* given configuration will be returned.
VAEncMiscParameterTypeDirtyRect = 13,
/** \brief Buffer type used for parallel BRC parameters. */
VAEncMiscParameterTypeParallelBRC = 14,
+ /** \brief Set MB partion mode mask and Half-pel/Quant-pel motion search */
+ VAEncMiscParameterTypeSubMbPartPel = 15,
+ /** \brief set encode quality tuning */
+ VAEncMiscParameterTypeEncQuality = 16,
+ /** \brief Buffer type used for encoder rounding offset parameters. */
+ VAEncMiscParameterTypeCustomRoundingControl = 17,
/** \brief Buffer type used for FEI input frame level parameters */
VAEncMiscParameterTypeFEIFrameControl = 18,
+ /** \brief encode extension buffer, ect. MPEG2 Sequence extenstion data */
+ VAEncMiscParameterTypeExtensionData = 19
} VAEncMiscParameterType;
/** \brief Packed header type. */
/** \brief Rate control parameters */
typedef struct _VAEncMiscParameterRateControl
{
- /* this is the maximum bit-rate to be constrained by the rate control implementation */
+ /** The maximum bit-rate which the the rate controller should generate. */
uint32_t bits_per_second;
- /* this is the bit-rate the rate control is targeting, as a percentage of the maximum
- * bit-rate for example if target_percentage is 95 then the rate control will target
- * a bit-rate that is 95% of the maximum bit-rate
+ /** The target bit-rate which the rate controller should generate, as a percentage of the
+ * maximum bit-rate.
+ *
+ * In CBR mode this value is ignored (treated as 100%).
*/
uint32_t target_percentage;
- /* windows size in milliseconds. For example if this is set to 500,
- * then the rate control will guarantee the target bit-rate over a 500 ms window
+ /** Rate control window size in milliseconds.
+ *
+ * The rate controller will attempt to guarantee that the target and maximum bit-rates are
+ * correct over this window.
*/
uint32_t window_size;
- /* initial QP at I frames */
+ /** Initial quantiser value used at the start of the stream.
+ *
+ * Ignored if set to zero.
+ */
uint32_t initial_qp;
+ /** Minimum quantiser value to use.
+ *
+ * The quantiser will not go below the value - if this limit is hit, the output bitrate may
+ * be lower than the target. Ignored if set to zero.
+ */
uint32_t min_qp;
+ /** Basic unit size.
+ *
+ * Only used by some drivers - see driver documentation for details. Set to zero if unused.
+ */
uint32_t basic_unit_size;
union
{
struct
{
+ /** Force rate controller reset.
+ *
+ * The next frame will be treated as the start of a new stream, with all rate
+ * controller state reset to its initial values.
+ */
uint32_t reset : 1;
- uint32_t disable_frame_skip : 1; /* Disable frame skip in rate control mode */
- uint32_t disable_bit_stuffing : 1; /* Disable bit stuffing in rate control mode */
- uint32_t mb_rate_control : 4; /* Control VA_RC_MB 0: default, 1: enable, 2: disable, other: reserved*/
- /*
- * The temporal layer that the rate control parameters are specified for.
+ /** Disable frame skip in rate control mode. */
+ uint32_t disable_frame_skip : 1;
+ /** Disable bit stuffing in rate control mode. */
+ uint32_t disable_bit_stuffing : 1;
+ /** Macroblock-level rate control.
+ *
+ * 0: use default, 1: always enable, 2: always disable, other: reserved.
+ *
+ * This feature is only available if VAConfigAttribRateControl has the
+ * \ref VA_RC_MB bit set.
*/
+ uint32_t mb_rate_control : 4;
+ /** The temporal layer that these rate control parameters apply to. */
uint32_t temporal_id : 8;
- uint32_t cfs_I_frames : 1; /* I frame also follows CFS */
+ /** Ensure that intra frames also conform to the constant frame size. */
+ uint32_t cfs_I_frames : 1;
+ /** Enable parallel rate control for hierarchical B frames.
+ *
+ * See \ref VA_RC_PARALLEL.
+ */
uint32_t enable_parallel_brc : 1;
uint32_t enable_dynamic_scaling : 1;
- uint32_t reserved : 14;
+ /** Frame tolerance mode.
+ *
+ * Indicates the tolerance the application has to variations in the frame size.
+ * For example, wireless display scenarios may require very steady bit rate to
+ * reduce buffering time. It affects the rate control algorithm used,
+ * but may or may not have an effect based on the combination of other BRC
+ * parameters. Only valid when the driver reports support for
+ * #VAConfigAttribFrameSizeToleranceSupport.
+ *
+ * equals 0 -- normal mode;
+ * equals 1 -- maps to sliding window;
+ * equals 2 -- maps to low delay mode;
+ * other -- invalid.
+ */
+ uint32_t frame_tolerance_mode : 2;
+ /** Reserved for future use, must be zero. */
+ uint32_t reserved : 12;
} bits;
uint32_t value;
} rc_flags;
- uint32_t ICQ_quality_factor; /* Initial ICQ quality factor: 1-51. */
- /** \brief Reserved bytes for future use, must be zero */
+ /** Initial quality factor used in ICQ mode.
+ *
+ * This value must be between 1 and 51.
+ * this value will be deprecated in future, to use quality_factor instead of it.
+ */
+ uint32_t ICQ_quality_factor;
+ /** Maximum quantiser value to use.
+ *
+ * The quantiser will not go above this value - if this limit is hit, the output bitrate
+ * may exceed the target. Ignored if set to zero.
+ */
uint32_t max_qp;
- uint32_t va_reserved[VA_PADDING_MEDIUM - 2];
+ /** Quality factor
+ *
+ * the range will be different for different codec
+ */
+ uint32_t quality_factor;
+ /** Reserved bytes for future use, must be zero. */
+ uint32_t va_reserved[VA_PADDING_MEDIUM - 3];
} VAEncMiscParameterRateControl;
+/** Encode framerate parameters.
+ *
+ * Sets the encode framerate used by the rate controller. This should be
+ * provided in all modes using a bitrate target (variable framerate is not
+ * supported).
+ */
typedef struct _VAEncMiscParameterFrameRate
{
- /*
+ /** Encode framerate.
+ *
* The framerate is specified as a number of frames per second, as a
* fraction. The denominator of the fraction is given in the top half
* (the high two bytes) of the framerate field, and the numerator is
{
struct
{
- /*
- * The temporal id the framerate parameters are specified for.
- */
+ /** The temporal layer that these framerate parameters apply to. */
uint32_t temporal_id : 8;
+ /** Reserved for future use, must be zero. */
uint32_t reserved : 24;
} bits;
uint32_t value;
uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterRIR;
+/** HRD / VBV buffering parameters for encoding.
+ *
+ * This sets the HRD / VBV parameters which will be used by the rate
+ * controller for encoding. It should be specified in modes using a bitrate
+ * target when the buffering of the output stream needs to be constrained.
+ *
+ * If not provided, the encoder may use arbitrary amounts of buffering.
+ */
typedef struct _VAEncMiscParameterHRD
{
- uint32_t initial_buffer_fullness; /* in bits */
- uint32_t buffer_size; /* in bits */
+ /** The initial fullness of the HRD coded picture buffer, in bits.
+ *
+ * This sets how full the CPB is when encoding begins - that is, how much
+ * buffering will happen on the decoder side before the first frame.
+ * The CPB fullness will be reset to this value after any rate control
+ * reset (a change in parameters or an explicit reset).
+ *
+ * For H.264, it should match the value of initial_cpb_removal_delay in
+ * buffering_period SEI messages.
+ */
+ uint32_t initial_buffer_fullness;
+ /** The HRD coded picture buffer size, in bits.
+ *
+ * For H.264, it should match the value of cpb_size_value_minus1 in the VUI
+ * parameters.
+ */
+ uint32_t buffer_size;
/** \brief Reserved bytes for future use, must be zero */
uint32_t va_reserved[VA_PADDING_LOW];
uint32_t *num_b_in_gop;
} VAEncMiscParameterParallelRateControl;
+/** per frame encoder quality controls, once set they will persist for all future frames
+ *till it is updated again. */
+typedef struct _VAEncMiscParameterEncQuality
+{
+ union
+ {
+ struct
+ {
+ /** Use raw frames for reference instead of reconstructed frames.
+ * it only impact motion estimation (ME) stage, and will not impact MC stage
+ * so the reconstruct picture will can match with decode side */
+ uint32_t useRawPicForRef : 1;
+ /** Disables skip check for ME stage, it will increase the bistream size
+ * but will improve the qulity */
+ uint32_t skipCheckDisable : 1;
+ /** Indicates app will override default driver FTQ settings using FTQEnable.
+ * FTQ is forward transform quantization */
+ uint32_t FTQOverride : 1;
+ /** Enables/disables FTQ. */
+ uint32_t FTQEnable : 1;
+ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
+ * enabled (FTQSkipThresholdLUT), else default driver thresholds will be used. */
+ uint32_t FTQSkipThresholdLUTInput : 1;
+ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
+ * disabled (NonFTQSkipThresholdLUT), else default driver thresholds will be used. */
+ uint32_t NonFTQSkipThresholdLUTInput : 1;
+ uint32_t ReservedBit : 1;
+ /** Control to enable the ME mode decision algorithm to bias to fewer B Direct/Skip types.
+ * Applies only to B frames, all other frames will ignore this setting. */
+ uint32_t directBiasAdjustmentEnable : 1;
+ /** Enables global motion bias. global motion also is called HME (Heirarchical Motion Estimation )
+ * HME is used to handle large motions and avoiding local minima in the video encoding process
+ * down scaled the input and reference picture, then do ME. the result will be a predictor to next level HME or ME
+ * current interface divide the HME to 3 level. UltraHME , SuperHME, and HME, result of UltraHME will be input of SurperHME,
+ * result of superHME will be a input for HME. HME result will be input of ME. it is a switch for HMEMVCostScalingFactor
+ * can change the HME bias inside RDO stage*/
+ uint32_t globalMotionBiasAdjustmentEnable : 1;
+ /** MV cost scaling ratio for HME ( predictors. It is used when
+ * globalMotionBiasAdjustmentEnable == 1, else it is ignored. Values are:
+ * 0: set MV cost to be 0 for HME predictor.
+ * 1: scale MV cost to be 1/2 of the default value for HME predictor.
+ * 2: scale MV cost to be 1/4 of the default value for HME predictor.
+ * 3: scale MV cost to be 1/8 of the default value for HME predictor. */
+ uint32_t HMEMVCostScalingFactor : 2;
+ /**disable HME, if it is disabled. Super*ultraHME should also be disabled */
+ uint32_t HMEDisable : 1;
+ /**disable Super HME, if it is disabled, ultraHME should be disabled */
+ uint32_t SuperHMEDisable : 1;
+ /** disable Ultra HME */
+ uint32_t UltraHMEDisable : 1;
+ /** disable panic mode. Panic mode happened when there are extreme BRC (bit rate control) requirement
+ * frame size cant achieve the target of BRC. when Panic mode is triggered, Coefficients will
+ * be set to zero. disable panic mode will improve quality but will impact BRC */
+ uint32_t PanicModeDisable : 1;
+ /** Force RepartitionCheck
+ * 0: DEFAULT - follow driver default settings.
+ * 1: FORCE_ENABLE - enable this feature totally for all cases.
+ * 2: FORCE_DISABLE - disable this feature totally for all cases. */
+ uint32_t ForceRepartitionCheck : 2;
+
+ };
+ uint32_t encControls;
+ };
+
+ /** Maps QP to skip thresholds when FTQ is enabled. Valid range is 0-255. */
+ uint8_t FTQSkipThresholdLUT[52];
+ /** Maps QP to skip thresholds when FTQ is disabled. Valid range is 0-65535. */
+ uint16_t NonFTQSkipThresholdLUT[52];
+
+ uint32_t reserved[VA_PADDING_HIGH]; // Reserved for future use.
+
+} VAEncMiscParameterEncQuality;
+
+/**
+ * \brief Custom Encoder Rounding Offset Control.
+ * Application may use this structure to set customized rounding
+ * offset parameters for quantization.
+ * Valid when \c VAConfigAttribCustomRoundingControl equals 1.
+ */
+typedef struct _VAEncMiscParameterCustomRoundingControl
+{
+ union {
+ struct {
+ /** \brief Enable customized rounding offset for intra blocks.
+ * If 0, default value would be taken by driver for intra
+ * rounding offset.
+ */
+ uint32_t enable_custom_rouding_intra : 1 ;
+
+ /** \brief Intra rounding offset
+ * Ignored if \c enable_custom_rouding_intra equals 0.
+ */
+ uint32_t rounding_offset_intra : 7;
+
+ /** \brief Enable customized rounding offset for inter blocks.
+ * If 0, default value would be taken by driver for inter
+ * rounding offset.
+ */
+ uint32_t enable_custom_rounding_inter : 1 ;
+
+ /** \brief Inter rounding offset
+ * Ignored if \c enable_custom_rouding_inter equals 0.
+ */
+ uint32_t rounding_offset_inter : 7;
+
+ /* Reserved */
+ uint32_t reserved :16;
+ } bits;
+ uint32_t value;
+ } rounding_offset_setting;
+} VAEncMiscParameterCustomRoundingControl;
/**
* There will be cases where the bitstream buffer will not have enough room to hold
* the data for the entire slice, and the following flags will be used in the slice
VAEncPictureTypeBidirectional = 2,
} VAEncPictureType;
-/* Encode Slice Parameter Buffer */
+/**
+ * \brief Encode Slice Parameter Buffer.
+ *
+ * @deprecated
+ * This is a deprecated encode slice parameter buffer, All applications
+ * \c can use VAEncSliceParameterBufferXXX (XXX = MPEG2, HEVC, H264, JPEG)
+ */
typedef struct _VAEncSliceParameterBuffer
{
uint32_t start_row_number; /* starting MB row number for this slice */
* #VAEncMiscParameterTypeMaxFrameSize.
*/
#define VA_CODED_BUF_STATUS_FRAME_SIZE_OVERFLOW 0x1000
+/**
+ * \brief the bitstream is bad or corrupt.
+ */
+#define VA_CODED_BUF_STATUS_BAD_BITSTREAM 0x8000
#define VA_CODED_BUF_STATUS_AIR_MB_OVER_THRESHOLD 0xff0000
/**
+ * \brief The coded buffer segment status contains frame encoding passes number
+ *
+ * This is the mask to get the number of encoding passes from the coded
+ * buffer segment status.
+ * NUMBER_PASS(bit24~bit27): the number for encoding passes executed for the coded frame.
+ *
+ */
+#define VA_CODED_BUF_STATUS_NUMBER_PASSES_MASK 0xf000000
+
+/**
* \brief The coded buffer segment contains a single NAL unit.
*
* This flag indicates that the coded buffer segment contains a
VAStatus
vaReleaseBufferHandle(VADisplay dpy, VABufferID buf_id);
+/** @name vaExportSurfaceHandle() flags
+ *
+ * @{
+ */
+/** Export surface to be read by external API. */
+#define VA_EXPORT_SURFACE_READ_ONLY 0x0001
+/** Export surface to be written by external API. */
+#define VA_EXPORT_SURFACE_WRITE_ONLY 0x0002
+/** Export surface to be both read and written by external API. */
+#define VA_EXPORT_SURFACE_READ_WRITE 0x0003
+/** Export surface with separate layers.
+ *
+ * For example, NV12 surfaces should be exported as two separate
+ * planes for luma and chroma.
+ */
+#define VA_EXPORT_SURFACE_SEPARATE_LAYERS 0x0004
+/** Export surface with composed layers.
+ *
+ * For example, NV12 surfaces should be exported as a single NV12
+ * composed object.
+ */
+#define VA_EXPORT_SURFACE_COMPOSED_LAYERS 0x0008
+
+/** @} */
+
+/**
+ * \brief Export a handle to a surface for use with an external API
+ *
+ * The exported handles are owned by the caller, and the caller is
+ * responsible for freeing them when no longer needed (e.g. by closing
+ * DRM PRIME file descriptors).
+ *
+ * This does not perform any synchronisation. If the contents of the
+ * surface will be read, vaSyncSurface() must be called before doing so.
+ * If the contents of the surface are written, then all operations must
+ * be completed externally before using the surface again by via VA-API
+ * functions.
+ *
+ * @param[in] dpy VA display.
+ * @param[in] surface_id Surface to export.
+ * @param[in] mem_type Memory type to export to.
+ * @param[in] flags Combination of flags to apply
+ * (VA_EXPORT_SURFACE_*).
+ * @param[out] descriptor Pointer to the descriptor structure to fill
+ * with the handle details. The type of this structure depends on
+ * the value of mem_type.
+ *
+ * @return Status code:
+ * - VA_STATUS_SUCCESS: Success.
+ * - VA_STATUS_ERROR_INVALID_DISPLAY: The display is not valid.
+ * - VA_STATUS_ERROR_UNIMPLEMENTED: The driver does not implement
+ * this interface.
+ * - VA_STATUS_ERROR_INVALID_SURFACE: The surface is not valid, or
+ * the surface is not exportable in the specified way.
+ * - VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE: The driver does not
+ * support exporting surfaces to the specified memory type.
+ */
+VAStatus vaExportSurfaceHandle(VADisplay dpy,
+ VASurfaceID surface_id,
+ uint32_t mem_type, uint32_t flags,
+ void *descriptor);
+
/**
* Render (Video Decode/Encode/Processing) Pictures
*
uint32_t start_mb; /* start mb address with errors */
uint32_t end_mb; /* end mb address with errors */
VADecodeErrorType decode_error_type;
-
+ uint32_t num_mb; /* number of mbs with errors */
/** \brief Reserved bytes for future use, must be zero */
- uint32_t va_reserved[VA_PADDING_LOW];
+ uint32_t va_reserved[VA_PADDING_LOW - 1];
} VASurfaceDecodeMBErrors;
/**
((unsigned long)(unsigned char) (ch0) | ((unsigned long)(unsigned char) (ch1) << 8) | \
((unsigned long)(unsigned char) (ch2) << 16) | ((unsigned long)(unsigned char) (ch3) << 24 ))
-/*
- * Pre-defined fourcc codes
+/* Pre-defined fourcc codes. */
+
+/** NV12: two-plane 8-bit YUV 4:2:0.
+ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
*/
#define VA_FOURCC_NV12 0x3231564E
+/** NV21: two-plane 8-bit YUV 4:2:0.
+ * Same as NV12, but with U and V swapped.
+ */
#define VA_FOURCC_NV21 0x3132564E
+
+/** AI44: packed 4-bit YA.
+ *
+ * The bottom half of each byte contains luma, the top half contains alpha.
+ */
#define VA_FOURCC_AI44 0x34344149
+
+/** RGBA: packed 8-bit RGBA.
+ *
+ * Four bytes per pixel: red, green, blue, alpha.
+ */
#define VA_FOURCC_RGBA 0x41424752
+/** RGBX: packed 8-bit RGB.
+ *
+ * Four bytes per pixel: red, green, blue, unspecified.
+ */
#define VA_FOURCC_RGBX 0x58424752
+/** BGRA: packed 8-bit RGBA.
+ *
+ * Four bytes per pixel: blue, green, red, alpha.
+ */
#define VA_FOURCC_BGRA 0x41524742
+/** BGRX: packed 8-bit RGB.
+ *
+ * Four bytes per pixel: blue, green, red, unspecified.
+ */
#define VA_FOURCC_BGRX 0x58524742
+/** ARGB: packed 8-bit RGBA.
+ *
+ * Four bytes per pixel: alpha, red, green, blue.
+ */
#define VA_FOURCC_ARGB 0x42475241
+/** XRGB: packed 8-bit RGB.
+ *
+ * Four bytes per pixel: unspecified, red, green, blue.
+ */
#define VA_FOURCC_XRGB 0x42475258
+/** ABGR: packed 8-bit RGBA.
+ *
+ * Four bytes per pixel: alpha, blue, green, red.
+ */
#define VA_FOURCC_ABGR 0x52474241
+/** XBGR: packed 8-bit RGB.
+ *
+ * Four bytes per pixel: unspecified, blue, green, red.
+ */
#define VA_FOURCC_XBGR 0x52474258
+
+/** UYUV: packed 8-bit YUV 4:2:2.
+ *
+ * Four bytes per pair of pixels: U, Y, U, V.
+ */
#define VA_FOURCC_UYVY 0x59565955
+/** YUY2: packed 8-bit YUV 4:2:2.
+ *
+ * Four bytes per pair of pixels: Y, U, Y, V.
+ */
#define VA_FOURCC_YUY2 0x32595559
+/** AYUV: packed 8-bit YUVA 4:4:4.
+ *
+ * Four bytes per pixel: A, Y, U, V.
+ */
#define VA_FOURCC_AYUV 0x56555941
+/** NV11: two-plane 8-bit YUV 4:1:1.
+ *
+ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
+ */
#define VA_FOURCC_NV11 0x3131564e
+/** YV12: three-plane 8-bit YUV 4:2:0.
+ *
+ * The three planes contain Y, V and U respectively.
+ */
#define VA_FOURCC_YV12 0x32315659
+/** P208: two-plane 8-bit YUV 4:2:2.
+ *
+ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
+ */
#define VA_FOURCC_P208 0x38303250
-/* IYUV same as I420, but most user perfer I420, will deprecate it */
-#define VA_FOURCC_IYUV 0x56555949
+/** I420: three-plane 8-bit YUV 4:2:0.
+ *
+ * The three planes contain Y, U and V respectively.
+ */
#define VA_FOURCC_I420 0x30323449
+/** YV24: three-plane 8-bit YUV 4:4:4.
+ *
+ * The three planes contain Y, V and U respectively.
+ */
#define VA_FOURCC_YV24 0x34325659
+/** YV32: four-plane 8-bit YUVA 4:4:4
+ *
+ * The four planes contain Y, V, U and A respectively.
+ */
#define VA_FOURCC_YV32 0x32335659
+/** Y800: 8-bit greyscale.
+ */
#define VA_FOURCC_Y800 0x30303859
+/** IMC3: three-plane 8-bit YUV 4:2:0.
+ *
+ * Equivalent to YV12, but with the additional constraint that the pitch of all three planes
+ * must be the same.
+ */
#define VA_FOURCC_IMC3 0x33434D49
+/** 411P: three-plane 8-bit YUV 4:1:1.
+ *
+ * The three planes contain Y, U and V respectively.
+ */
#define VA_FOURCC_411P 0x50313134
+/** 411R: three-plane 8-bit YUV.
+ *
+ * The subsampling is the transpose of 4:1:1 - full chroma appears on every fourth line.
+ * The three planes contain Y, U and V respectively.
+ */
+#define VA_FOURCC_411R 0x52313134
+/** 422H: three-plane 8-bit YUV 4:2:2.
+ *
+ * The three planes contain Y, U and V respectively.
+ */
#define VA_FOURCC_422H 0x48323234
+/** 422V: three-plane 8-bit YUV 4:4:0.
+ *
+ * The three planes contain Y, U and V respectively.
+ */
#define VA_FOURCC_422V 0x56323234
+/** 444P: three-plane 8-bit YUV 4:4:4.
+ *
+ * The three planes contain Y, U and V respectively.
+ */
#define VA_FOURCC_444P 0x50343434
+
+/** RGBP: three-plane 8-bit RGB.
+ *
+ * The three planes contain red, green and blue respectively.
+ */
#define VA_FOURCC_RGBP 0x50424752
+/** BGRP: three-plane 8-bit RGB.
+ *
+ * The three planes contain blue, green and red respectively.
+ */
#define VA_FOURCC_BGRP 0x50524742
-#define VA_FOURCC_411R 0x52313134 /* rotated 411P */
-/**
- * Planar YUV 4:2:2.
- * 8-bit Y plane, followed by 8-bit 2x1 subsampled V and U planes
+/** RG16: packed 5/6-bit RGB.
+ *
+ * Each pixel is a two-byte little-endian value.
+ * Red, green and blue are found in bits 15:11, 10:5, 4:0 respectively.
+ */
+#define VA_FOURCC_RGB565 0x36314752
+/** BG16: packed 5/6-bit RGB.
+ *
+ * Each pixel is a two-byte little-endian value.
+ * Blue, green and red are found in bits 15:11, 10:5, 4:0 respectively.
+ */
+#define VA_FOURCC_BGR565 0x36314742
+
+/** Y210: packed 10-bit YUV 4:2:2.
+ *
+ * Eight bytes represent a pair of pixels. Each sample is a two-byte little-endian value,
+ * with the bottom six bits ignored. The samples are in the order Y, U, Y, V.
+ */
+#define VA_FOURCC_Y210 0x30313259
+/** Y216: packed 16-bit YUV 4:2:2.
+ *
+ * Eight bytes represent a pair of pixels. Each sample is a two-byte little-endian value.
+ * The samples are in the order Y, U, Y, V.
+ */
+#define VA_FOURCC_Y216 0x36313259
+/** Y410: packed 10-bit YUVA 4:4:4.
+ *
+ * Each pixel is a four-byte little-endian value.
+ * A, V, Y, U are found in bits 31:30, 29:20, 19:10, 9:0 respectively.
+ */
+#define VA_FOURCC_Y410 0x30313459
+/** Y416: packed 16-bit YUVA 4:4:4.
+ *
+ * Each pixel is a set of four samples, each of which is a two-byte little-endian value.
+ * The samples are in the order A, V, Y, U.
+ */
+#define VA_FOURCC_Y416 0x36313459
+
+/** YV16: three-plane 8-bit YUV 4:2:2.
+ *
+ * The three planes contain Y, V and U respectively.
*/
#define VA_FOURCC_YV16 0x36315659
-/**
- * 10-bit and 16-bit Planar YUV 4:2:0.
+/** P010: two-plane 10-bit YUV 4:2:0.
+ *
+ * Each sample is a two-byte little-endian value with the bottom six bits ignored.
+ * The first plane contains Y, the second plane contains U and V in pairs of samples.
*/
#define VA_FOURCC_P010 0x30313050
+/** P016: two-plane 16-bit YUV 4:2:0.
+ *
+ * Each sample is a two-byte little-endian value. The first plane contains Y, the second
+ * plane contains U and V in pairs of samples.
+ */
#define VA_FOURCC_P016 0x36313050
-/**
- * 10-bit Planar YUV 420 and occupy the lower 10-bit.
+/** I010: three-plane 10-bit YUV 4:2:0.
+ *
+ * Each sample is a two-byte little-endian value with the top six bits ignored.
+ * The three planes contain Y, V and U respectively.
*/
#define VA_FOURCC_I010 0x30313049
+/** IYUV: three-plane 8-bit YUV 4:2:0.
+ *
+ * @deprecated Use I420 instead.
+ */
+#define VA_FOURCC_IYUV 0x56555949
+
/* byte order */
#define VA_LSB_FIRST 1
#define VA_MSB_FIRST 2
#include <va/va_dec_vp8.h>
#include <va/va_dec_vp9.h>
#include <va/va_enc_hevc.h>
+#include <va/va_fei_hevc.h>
#include <va/va_enc_h264.h>
#include <va/va_enc_jpeg.h>
#include <va/va_enc_mpeg2.h>
OSDN Git Service
