extern "C" {
#endif
-#ifdef __GNUC__
+#if defined(__GNUC__) && !defined(__COVERITY__)
#define va_deprecated __attribute__((deprecated))
#if __GNUC__ >= 6
#define va_deprecated_enum va_deprecated
* enable hardware accelerated video decode and encode at various
* entry-points (VLD, IDCT, Motion Compensation etc.) for the
* prevailing coding standards today (MPEG-2, MPEG-4 ASP/H.263, MPEG-4
- * AVC/H.264, VC-1/VMW3, and JPEG).
+ * AVC/H.264, VC-1/VMW3, and JPEG, HEVC/H265, VP8, VP9) and video pre/post
+ * processing
*
* VA-API is split into several modules:
* - \ref api_core
- * - \ref api_enc_h264
+ * - Encoder (H264, HEVC, JPEG, MPEG2, VP8, VP9)
+ * - \ref api_enc_h264
+ * - \ref api_enc_hevc
+ * - \ref api_enc_jpeg
+ * - \ref api_enc_mpeg2
+ * - \ref api_enc_vp8
+ * - \ref api_enc_vp9
+ * - Decoder (HEVC, JPEG, VP8, VP9)
+ * - \ref api_dec_hevc
+ * - \ref api_dec_jpeg
+ * - \ref api_dec_vp8
+ * - \ref api_dec_vp9
* - \ref api_vpp
+ * - FEI (H264, HEVC)
+ * - \ref api_fei
+ * - \ref api_fei_h264
+ * - \ref api_fei_hevc
*/
/**
/**
Overview
-The VA API is intended to provide an interface between a video decode/encode/display
+The VA API is intended to provide an interface between a video decode/encode/processing
application (client) and a hardware accelerator (server), to off-load
-video decode/encode/display operations from the host to the hardware accelerator at various
+video decode/encode/processing operations from the host to the hardware accelerator at various
entry-points.
The basic operation steps are:
- Negotiate a mutually acceptable configuration with the server to lock
down profile, entrypoints, and other attributes that will not change on
a frame-by-frame basis.
-- Create a decode context which represents a "virtualized" hardware decode
- device
-- Get and fill decode buffers with picture level, slice level and macroblock
- level data (depending on entrypoints)
-- Pass the decode buffers to the server to decode the current frame
+- Create a video decode, encode or processing context which represents a
+ "virtualized" hardware device
+- Get and fill the render buffers with the corresponding data (depending on
+ profiles and entrypoints)
+- Pass the render buffers to the server to handle the current frame
Initialization & Configuration Management
- Find out supported profiles
- Find out entrypoints for a given profile
- Find out configuration attributes for a given profile/entrypoint pair
-- Create a configuration for use by the decoder
+- Create a configuration for use by the application
*/
#define VA_STATUS_ERROR_HW_BUSY 0x00000022
/** \brief An unsupported memory type was supplied. */
#define VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE 0x00000024
+/** \brief Indicate allocated buffer size is not enough for input or output. */
+#define VA_STATUS_ERROR_NOT_ENOUGH_BUFFER 0x00000025
#define VA_STATUS_ERROR_UNKNOWN 0xFFFFFFFF
/** De-interlacing flags for vaPutSurface() */
#define VA_FILTER_SCALING_NL_ANAMORPHIC 0x00000300
#define VA_FILTER_SCALING_MASK 0x00000f00
+/** Padding size in 4-bytes */
+#define VA_PADDING_LOW 4
+#define VA_PADDING_MEDIUM 8
+#define VA_PADDING_HIGH 16
+#define VA_PADDING_LARGE 32
+
/**
* Returns a short english description of error_status
*/
typedef struct _VARectangle
{
- short x;
- short y;
- unsigned short width;
- unsigned short height;
+ int16_t x;
+ int16_t y;
+ uint16_t width;
+ uint16_t height;
} VARectangle;
/** \brief Generic motion vector data structure. */
VAProfileMPEG4Simple = 2,
VAProfileMPEG4AdvancedSimple = 3,
VAProfileMPEG4Main = 4,
- VAProfileH264Baseline = 5,
+ VAProfileH264Baseline va_deprecated_enum = 5,
VAProfileH264Main = 6,
VAProfileH264High = 7,
VAProfileVC1Simple = 8,
VAProfileVP9Profile0 = 19,
VAProfileVP9Profile1 = 20,
VAProfileVP9Profile2 = 21,
- VAProfileVP9Profile3 = 22
+ VAProfileVP9Profile3 = 22,
+ VAProfileHEVCMain12 = 23,
+ VAProfileHEVCMain422_10 = 24,
+ VAProfileHEVCMain422_12 = 25,
+ VAProfileHEVCMain444 = 26,
+ VAProfileHEVCMain444_10 = 27,
+ VAProfileHEVCMain444_12 = 28,
+ VAProfileHEVCSccMain = 29,
+ VAProfileHEVCSccMain10 = 30,
+ VAProfileHEVCSccMain444 = 31
} VAProfile;
/**
* (VAEncFEIMVBufferType, VAEncFEIMBModeBufferType) are needed for PAK input.
**/
VAEntrypointFEI = 11,
+ /**
+ * \brief VAEntrypointStats
+ *
+ * A pre-processing function for getting some statistics and motion vectors is added,
+ * and some extra controls for Encode pipeline are provided. The application can
+ * optionally call the statistics function to get motion vectors and statistics like
+ * variances, distortions before calling Encode function via this entry point.
+ *
+ * Checking whether Statistics is supported can be performed with vaQueryConfigEntrypoints().
+ * If Statistics entry point is supported, then the list of returned entry-points will
+ * include #VAEntrypointStats. Supported pixel format, maximum resolution and statistics
+ * specific attributes can be obtained via normal attribute query. One input buffer
+ * (VAStatsStatisticsParameterBufferType) and one or two output buffers
+ * (VAStatsStatisticsBufferType, VAStatsStatisticsBottomFieldBufferType (for interlace only)
+ * and VAStatsMVBufferType) are needed for this entry point.
+ **/
+ VAEntrypointStats = 12,
} VAEntrypoint;
/** Currently defined configuration attribute types */
* See \c VA_DEC_SLICE_MODE_xxx for the list of slice decoding modes.
*/
VAConfigAttribDecSliceMode = 6,
-
+ /**
+ * \brief JPEG decoding attribute. Read-only.
+ *
+ * This attribute exposes a number of capabilities of the underlying
+ * JPEG implementation. The attribute value is partitioned into fields as defined in the
+ * VAConfigAttribValDecJPEG union.
+ */
+ VAConfigAttribDecJPEG = 7,
+ /**
+ * \brief Decode processing support. Read/write.
+ *
+ * This attribute determines if the driver supports video processing
+ * with decoding using the decoding context in a single call, through
+ * vaGetConfigAttributes(); and if the user may use this feature,
+ * through vaCreateConfig(), if the driver supports the user scenario.
+ * The user will essentially create a regular decode VAContext. Therefore,
+ * the parameters of vaCreateContext() such as picture_width, picture_height
+ * and render_targets are in relation to the decode output parameters
+ * (not processing output parameters) as normal.
+ * If this attribute is not set by the user then it is assumed that no
+ * extra processing is done after decoding for this decode context.
+ *
+ * Since essentially the application is creating a decoder config and context,
+ * all function calls that take in the config (e.g. vaQuerySurfaceAttributes())
+ * or context are in relation to the decoder, except those video processing
+ * function specified in the next paragraph.
+ *
+ * Once the decode config and context are created, the user must further
+ * query the supported processing filters using vaQueryVideoProcFilters(),
+ * vaQueryVideoProcFilterCaps(), vaQueryVideoProcPipelineCaps() by specifying
+ * the created decode context. The user must provide processing information
+ * and extra processing output surfaces as "additional_outputs" to the driver
+ * through VAProcPipelineParameterBufferType. The render_target specified
+ * at vaBeginPicture() time refers to the decode output surface. The
+ * target surface for the output of processing needs to be a different
+ * surface since the decode process requires the original reconstructed buffer.
+ * The “surface” member of VAProcPipelineParameterBuffer should be set to the
+ * same as “render_target” set in vaBeginPicture(), but the driver may choose
+ * to ignore this parameter.
+ */
+ VAConfigAttribDecProcessing = 8,
/** @name Attributes for encoding */
/**@{*/
/**
*/
VAConfigAttribEncMacroblockInfo = 16,
/**
+ * \brief Maximum picture width. Read-only.
+ *
+ * This attribute determines the maximum picture width the driver supports
+ * for a given configuration.
+ */
+ VAConfigAttribMaxPictureWidth = 18,
+ /**
+ * \brief Maximum picture height. Read-only.
+ *
+ * This attribute determines the maximum picture height the driver supports
+ * for a given configuration.
+ */
+ VAConfigAttribMaxPictureHeight = 19,
+ /**
* \brief JPEG encoding attribute. Read-only.
*
* This attribute exposes a number of capabilities of the underlying
*/
VAConfigAttribEncQualityRange = 21,
/**
+ * \brief Encoding quantization attribute. Read-only.
+ *
+ * This attribute conveys whether the driver supports certain types of quantization methods
+ * for encoding (e.g. trellis). See \c VA_ENC_QUANTIZATION_xxx for the list of quantization methods
+ */
+ VAConfigAttribEncQuantization = 22,
+ /**
+ * \brief Encoding intra refresh attribute. Read-only.
+ *
+ * This attribute conveys whether the driver supports certain types of intra refresh methods
+ * for encoding (e.g. adaptive intra refresh or rolling intra refresh).
+ * See \c VA_ENC_INTRA_REFRESH_xxx for intra refresh methods
+ */
+ VAConfigAttribEncIntraRefresh = 23,
+ /**
* \brief Encoding skip frame attribute. Read-only.
*
* This attribute conveys whether the driver supports sending skip frame parameters
* VAConfigAttribValEncRateControlExt union.
*/
VAConfigAttribEncRateControlExt = 26,
-
/**
+ * \brief Processing rate reporting attribute. Read-only.
+ *
+ * This attribute conveys whether the driver supports reporting of
+ * encode/decode processing rate based on certain set of parameters
+ * (i.e. levels, I frame internvals) for a given configuration.
+ * If this is supported, vaQueryProcessingRate() can be used to get
+ * encode or decode processing rate.
+ * See \c VA_PROCESSING_RATE_xxx for encode/decode processing rate
+ */
+ VAConfigAttribProcessingRate = 27,
+ /**
+ * \brief Encoding dirty rectangle. Read-only.
+ *
+ * This attribute conveys whether the driver supports dirty rectangle.
+ * encoding, based on user provided ROI rectangles which indicate the rectangular areas
+ * where the content has changed as compared to the previous picture. The regions of the
+ * picture that are not covered by dirty rect rectangles are assumed to have not changed
+ * compared to the previous picture. The encoder may do some optimizations based on
+ * this information. The attribute value returned indicates the number of regions that
+ * are supported. e.g. A value of 0 means dirty rect encoding is not supported. If dirty
+ * rect encoding is supported, the ROI information is passed to the driver using
+ * VAEncMiscParameterTypeDirtyRect.
+ */
+ VAConfigAttribEncDirtyRect = 28,
+ /**
+ * \brief Parallel Rate Control (hierachical B) attribute. Read-only.
+ *
+ * This attribute conveys whether the encoder supports parallel rate control.
+ * It is a integer value 0 - unsupported, > 0 - maximum layer supported.
+ * This is the way when hireachical B frames are encoded, multiple independent B frames
+ * on the same layer may be processed at same time. If supported, app may enable it by
+ * setting enable_parallel_brc in VAEncMiscParameterRateControl,and the number of B frames
+ * per layer per GOP will be passed to driver through VAEncMiscParameterParallelRateControl
+ * structure.Currently three layers are defined.
+ */
+ VAConfigAttribEncParallelRateControl = 29,
+ /**
+ * \brief Dynamic Scaling Attribute. Read-only.
+ *
+ * This attribute conveys whether encoder is capable to determine dynamic frame
+ * resolutions adaptive to bandwidth utilization and processing power, etc.
+ * It is a boolean value 0 - unsupported, 1 - supported.
+ * If it is supported,for VP9, suggested frame resolution can be retrieved from VACodedBufferVP9Status.
+ */
+ VAConfigAttribEncDynamicScaling = 30,
+ /**
+ * \brief frame size tolerance support
+ * it indicates the tolerance of frame size
+ */
+ VAConfigAttribFrameSizeToleranceSupport = 31,
+ /**
* \brief Encode function type for FEI.
*
* This attribute conveys whether the driver supports different function types for encode.
* it is for FEI entry point only.
* Default is VA_FEI_FUNCTION_ENC_PAK.
*/
- VAConfigAttribFEIFunctionType = 32,
+ VAConfigAttribFEIFunctionType = 32,
/**
* \brief Maximum number of FEI MV predictors. Read-only.
*
* Currently it is for FEI entry point only.
*/
VAConfigAttribFEIMVPredictors = 33,
+ /**
+ * \brief Statistics attribute. Read-only.
+ *
+ * This attribute exposes a number of capabilities of the VAEntrypointStats entry
+ * point. The attribute value is partitioned into fields as defined in the
+ * VAConfigAttribValStats union. Currently it is for VAEntrypointStats only.
+ */
+ VAConfigAttribStats = 34,
+ /**
+ * \brief Tile Support Attribute. Read-only.
+ *
+ * This attribute conveys whether encoder is capable to support tiles.
+ * If not supported, the tile related parameters sent to encoder, such as
+ * tiling structure, should be ignored. 0 - unsupported, 1 - supported.
+ */
+ VAConfigAttribEncTileSupport = 35,
+ /**
+ * \brief whether accept rouding setting from application. Read-only.
+ * This attribute is for encode quality, if it is report,
+ * application can change the rounding setting by VAEncMiscParameterTypeCustomRoundingControl
+ */
+ VAConfigAttribCustomRoundingControl = 36,
+ /**
+ * \brief Encoding QP info block size attribute. Read-only.
+ * This attribute conveys the block sizes that underlying driver
+ * support for QP info for buffer #VAEncQpBuffer.
+ */
+ VAConfigAttribQPBlockSize = 37,
/**@}*/
VAConfigAttribTypeMax
} VAConfigAttribType;
*/
typedef struct _VAConfigAttrib {
VAConfigAttribType type;
- unsigned int value; /* OR'd flags (bits) for this attribute */
+ uint32_t value; /* OR'd flags (bits) for this attribute */
} VAConfigAttrib;
-/** attribute value for VAConfigAttribRTFormat */
-#define VA_RT_FORMAT_YUV420 0x00000001
-#define VA_RT_FORMAT_YUV422 0x00000002
-#define VA_RT_FORMAT_YUV444 0x00000004
-#define VA_RT_FORMAT_YUV411 0x00000008
-#define VA_RT_FORMAT_YUV400 0x00000010
-/** YUV formats with more than 8 bpp */
-#define VA_RT_FORMAT_YUV420_10BPP 0x00000100
-/** RGB formats */
-#define VA_RT_FORMAT_RGB16 0x00010000
-#define VA_RT_FORMAT_RGB32 0x00020000
-/* RGBP covers RGBP and BGRP fourcc */
-#define VA_RT_FORMAT_RGBP 0x00100000
+/* Attribute values for VAConfigAttribRTFormat. */
+
+#define VA_RT_FORMAT_YUV420 0x00000001 ///< YUV 4:2:0 8-bit.
+#define VA_RT_FORMAT_YUV422 0x00000002 ///< YUV 4:2:2 8-bit.
+#define VA_RT_FORMAT_YUV444 0x00000004 ///< YUV 4:4:4 8-bit.
+#define VA_RT_FORMAT_YUV411 0x00000008 ///< YUV 4:1:1 8-bit.
+#define VA_RT_FORMAT_YUV400 0x00000010 ///< Greyscale 8-bit.
+#define VA_RT_FORMAT_YUV420_10 0x00000100 ///< YUV 4:2:0 10-bit.
+#define VA_RT_FORMAT_YUV422_10 0x00000200 ///< YUV 4:2:2 10-bit.
+#define VA_RT_FORMAT_YUV444_10 0x00000400 ///< YUV 4:4:4 10-bit.
+#define VA_RT_FORMAT_YUV420_12 0x00001000 ///< YUV 4:2:0 12-bit.
+#define VA_RT_FORMAT_YUV422_12 0x00002000 ///< YUV 4:2:2 12-bit.
+#define VA_RT_FORMAT_YUV444_12 0x00004000 ///< YUV 4:4:4 12-bit.
+
+#define VA_RT_FORMAT_RGB16 0x00010000 ///< Packed RGB, 16 bits per pixel.
+#define VA_RT_FORMAT_RGB32 0x00020000 ///< Packed RGB, 32 bits per pixel, 8 bits per colour sample.
+#define VA_RT_FORMAT_RGBP 0x00100000 ///< Planar RGB, 8 bits per sample.
+#define VA_RT_FORMAT_RGB32_10 0x00200000 ///< Packed RGB, 32 bits per pixel, 10 bits per colour sample.
+
#define VA_RT_FORMAT_PROTECTED 0x80000000
+#define VA_RT_FORMAT_RGB32_10BPP VA_RT_FORMAT_RGB32_10 ///< @deprecated use VA_RT_FORMAT_RGB32_10 instead.
+#define VA_RT_FORMAT_YUV420_10BPP VA_RT_FORMAT_YUV420_10 ///< @deprecated use VA_RT_FORMAT_YUV420_10 instead.
+
/** @name Attribute values for VAConfigAttribRateControl */
/**@{*/
/** \brief Driver does not support any form of rate control. */
#define VA_RC_CQP 0x00000010
/** \brief Variable bitrate with peak rate higher than average bitrate. */
#define VA_RC_VBR_CONSTRAINED 0x00000020
+/** \brief Intelligent Constant Quality. Provided an initial ICQ_quality_factor,
+ * adjusts QP at a frame and MB level based on motion to improve subjective quality. */
+#define VA_RC_ICQ 0x00000040
/** \brief Macroblock based rate control. Per MB control is decided
* internally in the encoder. It may be combined with other RC modes, except CQP. */
#define VA_RC_MB 0x00000080
+/** \brief Constant Frame Size, it is used for small tolerent */
+#define VA_RC_CFS 0x00000100
+/** \brief Parallel BRC, for hierachical B.
+ *
+ * For hierachical B, B frames can be refered by other B frames.
+ * Currently three layers of hierachy are defined:
+ * B0 - regular B, no reference to other B frames.
+ * B1 - reference to only I, P and regular B0 frames.
+ * B2 - reference to any other frames, including B1.
+ * In Hierachical B structure, B frames on the same layer can be processed
+ * simultaneously. And BRC would adjust accordingly. This is so called
+ * Parallel BRC. */
+#define VA_RC_PARALLEL 0x00000200
/**@}*/
#define VA_DEC_SLICE_MODE_NORMAL 0x00000001
/** \brief Driver supports base mode for slice decoding */
#define VA_DEC_SLICE_MODE_BASE 0x00000002
+
+/** @name Attribute values for VAConfigAttribDecJPEG */
+/**@{*/
+typedef union _VAConfigAttribValDecJPEG {
+ struct{
+ /** \brief Set to (1 << VA_ROTATION_xxx) for supported rotation angles. */
+ uint32_t rotation : 4;
+ /** \brief Reserved for future use. */
+ uint32_t reserved : 28;
+ }bits;
+ uint32_t value;
+ uint32_t va_reserved[VA_PADDING_LOW];
+} VAConfigAttribValDecJPEG;
+/** @name Attribute values for VAConfigAttribDecProcessing */
+/**@{*/
+/** \brief No decoding + processing in a single decoding call. */
+#define VA_DEC_PROCESSING_NONE 0x00000000
+/** \brief Decode + processing in a single decoding call. */
+#define VA_DEC_PROCESSING 0x00000001
/**@}*/
/** @name Attribute values for VAConfigAttribEncPackedHeaders */
/**@{*/
/** \brief Driver does not support any packed headers mode. */
#define VA_ENC_PACKED_HEADER_NONE 0x00000000
-/** \brief Driver supports packed sequence headers. e.g. SPS for H.264. */
+/**
+ * \brief Driver supports packed sequence headers. e.g. SPS for H.264.
+ *
+ * Application must provide it to driver once this flag is returned through
+ * vaGetConfigAttributes()
+ */
#define VA_ENC_PACKED_HEADER_SEQUENCE 0x00000001
-/** \brief Driver supports packed picture headers. e.g. PPS for H.264. */
+/**
+ * \brief Driver supports packed picture headers. e.g. PPS for H.264.
+ *
+ * Application must provide it to driver once this falg is returned through
+ * vaGetConfigAttributes()
+ */
#define VA_ENC_PACKED_HEADER_PICTURE 0x00000002
-/** \brief Driver supports packed slice headers. e.g. \c slice_header() for H.264. */
+/**
+ * \brief Driver supports packed slice headers. e.g. slice_header() for H.264.
+ *
+ * Application must provide it to driver once this flag is returned through
+ * vaGetConfigAttributes()
+ */
#define VA_ENC_PACKED_HEADER_SLICE 0x00000004
-/** \brief Driver supports misc packed headers. e.g. SEI for H.264. */
+/**
+ * \brief Driver supports misc packed headers. e.g. SEI for H.264.
+ *
+ * @deprecated
+ * This is a deprecated packed header flag, All applications can use
+ * \c VA_ENC_PACKED_HEADER_RAW_DATA to pass the corresponding packed
+ * header data buffer to the driver
+ */
#define VA_ENC_PACKED_HEADER_MISC 0x00000008
/** \brief Driver supports raw packed header, see VAEncPackedHeaderRawData */
#define VA_ENC_PACKED_HEADER_RAW_DATA 0x00000010
/** @name Attribute values for VAConfigAttribEncSliceStructure */
/**@{*/
-/** \brief Driver supports an arbitrary number of rows per slice. */
-#define VA_ENC_SLICE_STRUCTURE_ARBITRARY_ROWS 0x00000000
/** \brief Driver supports a power-of-two number of rows per slice. */
#define VA_ENC_SLICE_STRUCTURE_POWER_OF_TWO_ROWS 0x00000001
/** \brief Driver supports an arbitrary number of macroblocks per slice. */
#define VA_ENC_SLICE_STRUCTURE_ARBITRARY_MACROBLOCKS 0x00000002
+/** \brief Dirver support 1 rows per slice */
+#define VA_ENC_SLICE_STRUCTURE_EQUAL_ROWS 0x00000004
+/** \brief Dirver support max encoded slice size per slice */
+#define VA_ENC_SLICE_STRUCTURE_MAX_SLICE_SIZE 0x00000008
+/** \brief Driver supports an arbitrary number of rows per slice. */
+#define VA_ENC_SLICE_STRUCTURE_ARBITRARY_ROWS 0x00000010
/**@}*/
/** \brief Attribute value for VAConfigAttribEncJPEG */
typedef union _VAConfigAttribValEncJPEG {
struct {
/** \brief set to 1 for arithmatic coding. */
- unsigned int arithmatic_coding_mode : 1;
+ uint32_t arithmatic_coding_mode : 1;
/** \brief set to 1 for progressive dct. */
- unsigned int progressive_dct_mode : 1;
+ uint32_t progressive_dct_mode : 1;
/** \brief set to 1 for non-interleaved. */
- unsigned int non_interleaved_mode : 1;
+ uint32_t non_interleaved_mode : 1;
/** \brief set to 1 for differential. */
- unsigned int differential_mode : 1;
- unsigned int max_num_components : 3;
- unsigned int max_num_scans : 4;
- unsigned int max_num_huffman_tables : 3;
- unsigned int max_num_quantization_tables : 3;
+ uint32_t differential_mode : 1;
+ uint32_t max_num_components : 3;
+ uint32_t max_num_scans : 4;
+ uint32_t max_num_huffman_tables : 3;
+ uint32_t max_num_quantization_tables : 3;
} bits;
- unsigned int value;
+ uint32_t value;
} VAConfigAttribValEncJPEG;
+/** @name Attribute values for VAConfigAttribEncQuantization */
+/**@{*/
+/** \brief Driver does not support special types of quantization */
+#define VA_ENC_QUANTIZATION_NONE 0x00000000
+/** \brief Driver supports trellis quantization */
+#define VA_ENC_QUANTIZATION_TRELLIS_SUPPORTED 0x00000001
+/**@}*/
+
+/** @name Attribute values for VAConfigAttribEncIntraRefresh */
+/**@{*/
+/** \brief Driver does not support intra refresh */
+#define VA_ENC_INTRA_REFRESH_NONE 0x00000000
+/** \brief Driver supports column based rolling intra refresh */
+#define VA_ENC_INTRA_REFRESH_ROLLING_COLUMN 0x00000001
+/** \brief Driver supports row based rolling intra refresh */
+#define VA_ENC_INTRA_REFRESH_ROLLING_ROW 0x00000002
+/** \brief Driver supports adaptive intra refresh */
+#define VA_ENC_INTRA_REFRESH_ADAPTIVE 0x00000010
+/** \brief Driver supports cyclic intra refresh */
+#define VA_ENC_INTRA_REFRESH_CYCLIC 0x00000020
+/** \brief Driver supports intra refresh of P frame*/
+#define VA_ENC_INTRA_REFRESH_P_FRAME 0x00010000
+/** \brief Driver supports intra refresh of B frame */
+#define VA_ENC_INTRA_REFRESH_B_FRAME 0x00020000
+/** \brief Driver supports intra refresh of multiple reference encoder */
+#define VA_ENC_INTRA_REFRESH_MULTI_REF 0x00040000
+
+/**@}*/
+
/** \brief Attribute value for VAConfigAttribEncROI */
typedef union _VAConfigAttribValEncROI {
struct {
/** \brief The number of ROI regions supported, 0 if ROI is not supported. */
- unsigned int num_roi_regions : 8;
+ uint32_t num_roi_regions : 8;
/**
* \brief A flag indicates whether ROI priority is supported
*
* User should ignore \ref roi_rc_priority_support when VAConfigAttribRateControl == VA_RC_CQP
* because ROI delta QP is always required when VAConfigAttribRateControl == VA_RC_CQP.
*/
- unsigned int roi_rc_priority_support : 1;
+ uint32_t roi_rc_priority_support : 1;
/**
* \brief A flag indicates whether ROI delta QP is supported
*
- * \ref roi_rc_qp_delat_support equal to 1 specifies the underlying driver supports
+ * \ref roi_rc_qp_delta_support equal to 1 specifies the underlying driver supports
* ROI delta QP when VAConfigAttribRateControl != VA_RC_CQP, user can use \c roi_value
- * in #VAEncROI to set ROI delta QP. \ref roi_rc_qp_delat_support equal to 0 specifies
+ * in #VAEncROI to set ROI delta QP. \ref roi_rc_qp_delta_support equal to 0 specifies
* the underlying driver doesn't support ROI delta QP.
*
- * User should ignore \ref roi_rc_qp_delat_support when VAConfigAttribRateControl == VA_RC_CQP
+ * User should ignore \ref roi_rc_qp_delta_support when VAConfigAttribRateControl == VA_RC_CQP
* because ROI delta QP is always required when VAConfigAttribRateControl == VA_RC_CQP.
*/
- unsigned int roi_rc_qp_delat_support : 1;
- unsigned int reserved : 22;
+ uint32_t roi_rc_qp_delta_support : 1;
+ uint32_t reserved : 22;
} bits;
- unsigned int value;
+ uint32_t value;
} VAConfigAttribValEncROI;
/** \brief Attribute value for VAConfigAttribEncRateControlExt */
* layers that supported by the underlying driver. \ref max_num_temporal_layers_minus1
* equal to 0 implies the underlying driver doesn't support encoding with temporal layer.
*/
- unsigned int max_num_temporal_layers_minus1 : 8;
+ uint32_t max_num_temporal_layers_minus1 : 8;
/**
* /brief support temporal layer bit-rate control flag
* in #VAEncMiscParameterRateControl and #VAEncMiscParameterFrameRate if
* \ref temporal_layer_bitrate_control_flag is equal to 0 or #VAConfigAttribRateControl == #VA_RC_CQP
*/
- unsigned int temporal_layer_bitrate_control_flag : 1;
- unsigned int reserved : 23;
+ uint32_t temporal_layer_bitrate_control_flag : 1;
+ uint32_t reserved : 23;
} bits;
- unsigned int value;
+ uint32_t value;
} VAConfigAttribValEncRateControlExt;
+/** @name Attribute values for VAConfigAttribProcessingRate. */
+/**@{*/
+/** \brief Driver does not support processing rate report */
+#define VA_PROCESSING_RATE_NONE 0x00000000
+/** \brief Driver supports encode processing rate report */
+#define VA_PROCESSING_RATE_ENCODE 0x00000001
+/** \brief Driver supports decode processing rate report */
+#define VA_PROCESSING_RATE_DECODE 0x00000002
+/**@}*/
/**
* if an attribute is not applicable for a given
* profile/entrypoint pair, then set the value to the following
typedef VAGenericID VAConfigID;
/**
- * Create a configuration for the decode pipeline
+ * Create a configuration for the video decode/encode/processing pipeline
* it passes in the attribute list that specifies the attributes it cares
* about, with the rest taking default values.
*/
/**
* Contexts and Surfaces
*
- * Context represents a "virtual" video decode pipeline. Surfaces are render
- * targets for a given context. The data in the surfaces are not accessible
- * to the client and the internal data format of the surface is implementatin
- * specific.
+ * Context represents a "virtual" video decode, encode or video processing
+ * pipeline. Surfaces are render targets for a given context. The data in the
+ * surfaces are not accessible to the client except if derived image is supported
+ * and the internal data format of the surface is implementation specific.
*
- * Surfaces will be bound to a context when the context is created. Once
- * a surface is bound to a given context, it can not be used to create
- * another context. The association is removed when the context is destroyed
+ * Surfaces are provided as a hint of what surfaces will be used when the context
+ * is created through vaCreateContext(). A surface may be used by different contexts
+ * at the same time as soon as application can make sure the operations are synchronized
+ * between different contexts, e.g. a surface is used as the output of a decode context
+ * and the input of a video process context. Surfaces can only be destroyed after all
+ * contexts using these surfaces have been destroyed.
*
* Both contexts and surfaces are identified by unique IDs and its
* implementation specific internals are kept opaque to the clients
/** \brief Value holder. */
union {
/** \brief 32-bit signed integer. */
- int i;
+ int32_t i;
/** \brief 32-bit float. */
float f;
/** \brief Generic pointer. */
/** \brief Type. */
VASurfaceAttribType type;
/** \brief Flags. See "Surface attribute flags". */
- unsigned int flags;
+ uint32_t flags;
/** \brief Value. See "Surface attribute types" for the expected types. */
VAGenericValue value;
} VASurfaceAttrib;
*/
typedef struct _VASurfaceAttribExternalBuffers {
/** \brief pixel format in fourcc. */
- unsigned int pixel_format;
+ uint32_t pixel_format;
/** \brief width in pixels. */
- unsigned int width;
+ uint32_t width;
/** \brief height in pixels. */
- unsigned int height;
+ uint32_t height;
/** \brief total size of the buffer in bytes. */
- unsigned int data_size;
+ uint32_t data_size;
/** \brief number of planes for planar layout */
- unsigned int num_planes;
+ uint32_t num_planes;
/** \brief pitch for each plane in bytes */
- unsigned int pitches[4];
+ uint32_t pitches[4];
/** \brief offset for each plane in bytes */
- unsigned int offsets[4];
+ uint32_t offsets[4];
/** \brief buffer handles or user pointers */
- unsigned long *buffers;
+ uintptr_t *buffers;
/** \brief number of elements in the "buffers" array */
- unsigned int num_buffers;
+ uint32_t num_buffers;
/** \brief flags. See "Surface external buffer descriptor flags". */
- unsigned int flags;
+ uint32_t flags;
/** \brief reserved for passing private data */
void *private_data;
} VASurfaceAttribExternalBuffers;
#define VA_SURFACE_ATTRIB_USAGE_HINT_VPP_WRITE 0x00000008
/** \brief Surface used for display. */
#define VA_SURFACE_ATTRIB_USAGE_HINT_DISPLAY 0x00000010
+/** \brief Surface used for export to third-party APIs, e.g. via
+ * vaExportSurfaceHandle(). */
+#define VA_SURFACE_ATTRIB_USAGE_HINT_EXPORT 0x00000020
/**@}*/
/**
* \brief Queries surface attributes for the supplied config.
*
- * Unlike vaGetSurfaceAttributes(), this function queries for all
- * supported attributes for the supplied VA @config. In particular, if
- * the underlying hardware supports the creation of VA surfaces in
- * various formats, then this function will enumerate all pixel
- * formats that are supported.
+ * This function queries for all supported attributes for the
+ * supplied VA @config. In particular, if the underlying hardware
+ * supports the creation of VA surfaces in various formats, then
+ * this function will enumerate all pixel formats that are supported.
*
* The \c attrib_list array is allocated by the user and \c
* num_attribs shall be initialized to the number of allocated
* \brief Creates an array of surfaces
*
* Creates an array of surfaces. The optional list of attributes shall
- * be constructed and validated through vaGetSurfaceAttributes() or
- * constructed based based on what the underlying hardware could
- * expose through vaQuerySurfaceAttributes().
+ * be constructed based on what the underlying hardware could expose
+ * through vaQuerySurfaceAttributes().
*
* @param[in] dpy the VA display
* @param[in] format the desired surface format. See \c VA_RT_FORMAT_*
/**
* vaDestroySurfaces - Destroy resources associated with surfaces.
- * Surfaces can only be destroyed after the context associated has been
+ * Surfaces can only be destroyed after all contexts using these surfaces have been
* destroyed.
* dpy: display
* surfaces: array of surfaces to destroy
* picture_height: coded picture height
* flag: any combination of the following:
* VA_PROGRESSIVE (only progressive frame pictures in the sequence when set)
- * render_targets: render targets (surfaces) tied to the context
+ * render_targets: a hint for render targets (surfaces) tied to the context
* num_render_targets: number of render targets in the above array
* context: created context id upon return
*/
VAContextID context
);
+//Multi-frame context
+typedef VAGenericID VAMFContextID;
+/**
+ * vaCreateMFContext - Create a multi-frame context
+ * interface encapsulating common for all streams memory objects and structures
+ * required for single GPU task submission from several VAContextID's.
+ * Allocation: This call only creates an instance, doesn't allocate any additional memory.
+ * Support identification: Application can identify multi-frame feature support by ability
+ * to create multi-frame context. If driver supports multi-frame - call successful,
+ * mf_context != NULL and VAStatus = VA_STATUS_SUCCESS, otherwise if multi-frame processing
+ * not supported driver returns VA_STATUS_ERROR_UNIMPLEMENTED and mf_context = NULL.
+ * return values:
+ * VA_STATUS_SUCCESS - operation successful.
+ * VA_STATUS_ERROR_UNIMPLEMENTED - no support for multi-frame.
+ * dpy: display adapter.
+ * mf_context: Multi-Frame context encapsulating all associated context
+ * for multi-frame submission.
+ */
+VAStatus vaCreateMFContext (
+ VADisplay dpy,
+ VAMFContextID *mf_context /* out */
+);
+
+/**
+ * vaMFAddContext - Provide ability to associate each context used for
+ * Multi-Frame submission and common Multi-Frame context.
+ * Try to add context to understand if it is supported.
+ * Allocation: this call allocates and/or reallocates all memory objects
+ * common for all contexts associated with particular Multi-Frame context.
+ * All memory required for each context(pixel buffers, internal driver
+ * buffers required for processing) allocated during standard vaCreateContext call for each context.
+ * Runtime dependency - if current implementation doesn't allow to run different entry points/profile,
+ * first context added will set entry point/profile for whole Multi-Frame context,
+ * all other entry points and profiles can be rejected to be added.
+ * Return values:
+ * VA_STATUS_SUCCESS - operation successful, context was added.
+ * VA_STATUS_ERROR_OPERATION_FAILED - something unexpected happened - application have to close
+ * current mf_context and associated contexts and start working with new ones.
+ * VA_STATUS_ERROR_INVALID_CONTEXT - ContextID is invalid, means:
+ * 1 - mf_context is not valid context or
+ * 2 - driver can't suport different VAEntrypoint or VAProfile simultaneosly
+ * and current context contradicts with previously added, application can continue with current mf_context
+ * and other contexts passed this call, rejected context can continue work in stand-alone
+ * mode or other mf_context.
+ * VA_STATUS_ERROR_UNSUPPORTED_ENTRYPOINT - particular context being added was created with with
+ * unsupported VAEntrypoint. Application can continue with current mf_context
+ * and other contexts passed this call, rejected context can continue work in stand-alone
+ * mode.
+ * VA_STATUS_ERROR_UNSUPPORTED_PROFILE - Current context with Particular VAEntrypoint is supported
+ * but VAProfile is not supported. Application can continue with current mf_context
+ * and other contexts passed this call, rejected context can continue work in stand-alone
+ * mode.
+ * dpy: display adapter.
+ * context: context being associated with Multi-Frame context.
+ * mf_context: - multi-frame context used to associate contexts for multi-frame submission.
+ */
+VAStatus vaMFAddContext (
+ VADisplay dpy,
+ VAMFContextID mf_context,
+ VAContextID context
+);
+
+/**
+ * vaMFReleaseContext - Removes context from multi-frame and
+ * association with multi-frame context.
+ * After association removed vaEndPicture will submit tasks, but not vaMFSubmit.
+ * Return values:
+ * VA_STATUS_SUCCESS - operation successful, context was removed.
+ * VA_STATUS_ERROR_OPERATION_FAILED - something unexpected happened.
+ * application need to destroy this VAMFContextID and all assotiated VAContextID
+ * dpy: display
+ * mf_context: VAMFContextID where context is added
+ * context: VAContextID to be added
+ */
+VAStatus vaMFReleaseContext (
+ VADisplay dpy,
+ VAMFContextID mf_context,
+ VAContextID context
+);
+
/**
* Buffers
* Buffers are used to pass various types of data from the
VAEncFEIDistortionBufferType = 45,
VAEncFEIMBControlBufferType = 46,
VAEncFEIMVPredictorBufferType = 47,
+ VAStatsStatisticsParameterBufferType = 48,
+ /** \brief Statistics output for VAEntrypointStats progressive and top field of interlaced case*/
+ VAStatsStatisticsBufferType = 49,
+ /** \brief Statistics output for VAEntrypointStats bottom field of interlaced case*/
+ VAStatsStatisticsBottomFieldBufferType = 50,
+ VAStatsMVBufferType = 51,
+ VAStatsMVPredictorBufferType = 52,
+ /** Force MB's to be non skip for encode.it's per-mb control buffer, The width of the MB map
+ * Surface is (width of the Picture in MB unit) * 1 byte, multiple of 64 bytes.
+ * The height is (height of the picture in MB unit). The picture is either
+ * frame or non-interleaved top or bottom field. If the application provides this
+ *surface, it will override the "skipCheckDisable" setting in VAEncMiscParameterEncQuality.
+ */
+ VAEncMacroblockDisableSkipMapBufferType = 53,
+ /**
+ * \brief HEVC FEI CTB level cmd buffer
+ * it is CTB level information for future usage.
+ */
+ VAEncFEICTBCmdBufferType = 54,
+ /**
+ * \brief HEVC FEI CU level data buffer
+ * it's CTB level information for future usage
+ */
+ VAEncFEICURecordBufferType = 55,
+ /** decode stream out buffer, intermedia data of decode, it may include MV, MB mode etc.
+ * it can be used to detect motion and analyze the frame contain */
+ VADecodeStreamoutBufferType = 56,
VABufferTypeMax
} VABufferType;
+/**
+ * Processing rate parameter for encode.
+ */
+typedef struct _VAProcessingRateParameterEnc {
+ /** \brief Profile level */
+ uint8_t level_idc;
+ uint8_t reserved[3];
+ /** \brief quality level. When set to 0, default quality
+ * level is used.
+ */
+ uint32_t quality_level;
+ /** \brief Period between I frames. */
+ uint32_t intra_period;
+ /** \brief Period between I/P frames. */
+ uint32_t ip_period;
+} VAProcessingRateParameterEnc;
+
+/**
+ * Processing rate parameter for decode.
+ */
+typedef struct _VAProcessingRateParameterDec {
+ /** \brief Profile level */
+ uint8_t level_idc;
+ uint8_t reserved0[3];
+ uint32_t reserved;
+} VAProcessingRateParameterDec;
+
+typedef struct _VAProcessingRateParameter {
+ union {
+ VAProcessingRateParameterEnc proc_buf_enc;
+ VAProcessingRateParameterDec proc_buf_dec;
+ };
+} VAProcessingRateParameter;
+
+/**
+ * \brief Queries processing rate for the supplied config.
+ *
+ * This function queries the processing rate based on parameters in
+ * \c proc_buf for the given \c config. Upon successful return, the processing
+ * rate value will be stored in \c processing_rate. Processing rate is
+ * specified as the number of macroblocks/CTU per second.
+ *
+ * If NULL is passed to the \c proc_buf, the default processing rate for the
+ * given configuration will be returned.
+ *
+ * @param[in] dpy the VA display
+ * @param[in] config the config identifying a codec or a video
+ * processing pipeline
+ * @param[in] proc_buf the buffer that contains the parameters for
+ either the encode or decode processing rate
+ * @param[out] processing_rate processing rate in number of macroblocks per
+ second constrained by parameters specified in proc_buf
+ *
+ */
+VAStatus
+vaQueryProcessingRate(
+ VADisplay dpy,
+ VAConfigID config,
+ VAProcessingRateParameter *proc_buf,
+ unsigned int *processing_rate
+);
+
typedef enum
{
VAEncMiscParameterTypeFrameRate = 0,
/** \brief Buffer type used for HRD parameters. */
VAEncMiscParameterTypeHRD = 5,
VAEncMiscParameterTypeQualityLevel = 6,
+ /** \brief Buffer type used for Rolling intra refresh */
+ VAEncMiscParameterTypeRIR = 7,
+ /** \brief Buffer type used for quantization parameters, it's per-sequence parameter*/
+ VAEncMiscParameterTypeQuantization = 8,
/** \brief Buffer type used for sending skip frame parameters to the encoder's
* rate control, when the user has externally skipped frames. */
VAEncMiscParameterTypeSkipFrame = 9,
VAEncMiscParameterTypeROI = 10,
/** \brief Buffer type used for temporal layer structure */
VAEncMiscParameterTypeTemporalLayerStructure = 12,
+ /** \brief Buffer type used for dirty region-of-interest (ROI) parameters. */
+ VAEncMiscParameterTypeDirtyRect = 13,
+ /** \brief Buffer type used for parallel BRC parameters. */
+ VAEncMiscParameterTypeParallelBRC = 14,
+ /** \brief Set MB partion mode mask and Half-pel/Quant-pel motion search */
+ VAEncMiscParameterTypeSubMbPartPel = 15,
+ /** \brief set encode quality tuning */
+ VAEncMiscParameterTypeEncQuality = 16,
+ /** \brief Buffer type used for encoder rounding offset parameters. */
+ VAEncMiscParameterTypeCustomRoundingControl = 17,
/** \brief Buffer type used for FEI input frame level parameters */
VAEncMiscParameterTypeFEIFrameControl = 18,
+ /** \brief encode extension buffer, ect. MPEG2 Sequence extenstion data */
+ VAEncMiscParameterTypeExtensionData = 19
} VAEncMiscParameterType;
/** \brief Packed header type. */
* in the packed header parameter structure.
*/
VAEncPackedHeaderRawData = 4,
- /** \brief Misc packed header. See codec-specific definitions. */
- VAEncPackedHeaderMiscMask = 0x80000000,
+ /**
+ * \brief Misc packed header. See codec-specific definitions.
+ *
+ * @deprecated
+ * This is a deprecated packed header type. All applications can use
+ * \c VAEncPackedHeaderRawData to insert a codec-specific packed header
+ */
+ VAEncPackedHeaderMiscMask va_deprecated_enum = 0x80000000,
} VAEncPackedHeaderType;
/** \brief Packed header parameter. */
typedef struct _VAEncPackedHeaderParameterBuffer {
/** Type of the packed header buffer. See #VAEncPackedHeaderType. */
- unsigned int type;
+ uint32_t type;
/** \brief Size of the #VAEncPackedHeaderDataBuffer in bits. */
- unsigned int bit_length;
+ uint32_t bit_length;
/** \brief Flag: buffer contains start code emulation prevention bytes? */
- unsigned char has_emulation_bytes;
+ uint8_t has_emulation_bytes;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncPackedHeaderParameterBuffer;
/**
typedef struct _VAEncMiscParameterBuffer
{
VAEncMiscParameterType type;
- unsigned int data[];
+ uint32_t data[];
} VAEncMiscParameterBuffer;
/** \brief Temporal layer Structure*/
typedef struct _VAEncMiscParameterTemporalLayerStructure
{
/** \brief The number of temporal layers */
- unsigned int number_of_layers;
+ uint32_t number_of_layers;
/** \brief The length of the array defining frame layer membership. Should be 1-32 */
- unsigned int periodicity;
+ uint32_t periodicity;
/**
* \brief The array indicating the layer id for each frame
*
* The layer id for the first frame in a coded sequence is always 0, so layer_id[] specifies the layer
* ids for frames starting from the 2nd frame.
*/
- unsigned int layer_id[32];
+ uint32_t layer_id[32];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterTemporalLayerStructure;
typedef struct _VAEncMiscParameterRateControl
{
/* this is the maximum bit-rate to be constrained by the rate control implementation */
- unsigned int bits_per_second;
+ uint32_t bits_per_second;
/* this is the bit-rate the rate control is targeting, as a percentage of the maximum
* bit-rate for example if target_percentage is 95 then the rate control will target
* a bit-rate that is 95% of the maximum bit-rate
*/
- unsigned int target_percentage;
+ uint32_t target_percentage;
/* windows size in milliseconds. For example if this is set to 500,
* then the rate control will guarantee the target bit-rate over a 500 ms window
*/
- unsigned int window_size;
+ uint32_t window_size;
/* initial QP at I frames */
- unsigned int initial_qp;
- unsigned int min_qp;
- unsigned int basic_unit_size;
+ uint32_t initial_qp;
+ uint32_t min_qp;
+ uint32_t basic_unit_size;
union
{
struct
{
- unsigned int reset : 1;
- unsigned int disable_frame_skip : 1; /* Disable frame skip in rate control mode */
- unsigned int disable_bit_stuffing : 1; /* Disable bit stuffing in rate control mode */
- unsigned int mb_rate_control : 4; /* Control VA_RC_MB 0: default, 1: enable, 2: disable, other: reserved*/
+ uint32_t reset : 1;
+ uint32_t disable_frame_skip : 1; /* Disable frame skip in rate control mode */
+ uint32_t disable_bit_stuffing : 1; /* Disable bit stuffing in rate control mode */
+ uint32_t mb_rate_control : 4; /* Control VA_RC_MB 0: default, 1: enable, 2: disable, other: reserved*/
/*
* The temporal layer that the rate control parameters are specified for.
*/
- unsigned int temporal_id : 8;
- unsigned int reserved : 17;
+ uint32_t temporal_id : 8;
+ uint32_t cfs_I_frames : 1; /* I frame also follows CFS */
+ uint32_t enable_parallel_brc : 1;
+ uint32_t enable_dynamic_scaling : 1;
+ /** \brief Frame Tolerance Mode
+ * Indicates the tolerance the application has to variations in the frame size.
+ * For example, wireless display scenarios may require very steady bit rate to
+ * reduce buffering time. It affects the rate control algorithm used,
+ * but may or may not have an effect based on the combination of other BRC
+ * parameters. Only valid when the driver reports support for
+ * #VAConfigAttribFrameSizeToleranceSupport.
+ *
+ * equals 0 -- normal mode;
+ * equals 1 -- maps to sliding window;
+ * equals 2 -- maps to low delay mode;
+ * other -- invalid.
+ */
+ uint32_t frame_tolerance_mode : 2;
+ uint32_t reserved : 12;
} bits;
- unsigned int value;
+ uint32_t value;
} rc_flags;
+ uint32_t ICQ_quality_factor; /* Initial ICQ quality factor: 1-51. */
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t max_qp;
+ uint32_t va_reserved[VA_PADDING_MEDIUM - 2];
} VAEncMiscParameterRateControl;
typedef struct _VAEncMiscParameterFrameRate
* it takes the value one instead, so the framerate is just the integer
* in the low 2 bytes.
*/
- unsigned int framerate;
+ uint32_t framerate;
union
{
struct
/*
* The temporal id the framerate parameters are specified for.
*/
- unsigned int temporal_id : 8;
- unsigned int reserved : 24;
+ uint32_t temporal_id : 8;
+ uint32_t reserved : 24;
} bits;
- unsigned int value;
+ uint32_t value;
} framerate_flags;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterFrameRate;
/**
*/
typedef struct _VAEncMiscParameterMaxSliceSize
{
- unsigned int max_slice_size;
+ uint32_t max_slice_size;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterMaxSliceSize;
typedef struct _VAEncMiscParameterAIR
{
- unsigned int air_num_mbs;
- unsigned int air_threshold;
- unsigned int air_auto; /* if set to 1 then hardware auto-tune the AIR threshold */
+ uint32_t air_num_mbs;
+ uint32_t air_threshold;
+ uint32_t air_auto; /* if set to 1 then hardware auto-tune the AIR threshold */
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterAIR;
+/*
+ * \brief Rolling intra refresh data structure for encoding.
+ */
+typedef struct _VAEncMiscParameterRIR
+{
+ union
+ {
+ struct
+ /**
+ * \brief Indicate if intra refresh is enabled in column/row.
+ *
+ * App should query VAConfigAttribEncIntraRefresh to confirm RIR support
+ * by the driver before sending this structure.
+ */
+ {
+ /* \brief enable RIR in column */
+ uint32_t enable_rir_column : 1;
+ /* \brief enable RIR in row */
+ uint32_t enable_rir_row : 1;
+ uint32_t reserved : 30;
+ } bits;
+ uint32_t value;
+ } rir_flags;
+ /**
+ * \brief Indicates the column or row location in MB. It is ignored if
+ * rir_flags is 0.
+ */
+ uint16_t intra_insertion_location;
+ /**
+ * \brief Indicates the number of columns or rows in MB. It is ignored if
+ * rir_flags is 0.
+ */
+ uint16_t intra_insert_size;
+ /**
+ * \brief indicates the Qp difference for inserted intra columns or rows.
+ * App can use this to adjust intra Qp based on bitrate & max frame size.
+ */
+ uint8_t qp_delta_for_inserted_intra;
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
+} VAEncMiscParameterRIR;
+
typedef struct _VAEncMiscParameterHRD
{
- unsigned int initial_buffer_fullness; /* in bits */
- unsigned int buffer_size; /* in bits */
+ uint32_t initial_buffer_fullness; /* in bits */
+ uint32_t buffer_size; /* in bits */
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterHRD;
/**
/** \brief Type. Shall be set to #VAEncMiscParameterTypeMaxFrameSize. */
VAEncMiscParameterType type;
/** \brief Maximum size of a frame (in bits). */
- unsigned int max_frame_size;
+ uint32_t max_frame_size;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterBufferMaxFrameSize;
/**
/** \brief Encoding quality level setting. When set to 0, default quality
* level is used.
*/
- unsigned int quality_level;
+ uint32_t quality_level;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterBufferQualityLevel;
/**
+ * \brief Quantization settings for encoding.
+ *
+ * Some encoders support special types of quantization such as trellis, and this structure
+ * can be used by the app to control these special types of quantization by the encoder.
+ */
+typedef struct _VAEncMiscParameterQuantization
+{
+ union
+ {
+ /* if no flags is set then quantization is determined by the driver */
+ struct
+ {
+ /* \brief disable trellis for all frames/fields */
+ uint64_t disable_trellis : 1;
+ /* \brief enable trellis for I frames/fields */
+ uint64_t enable_trellis_I : 1;
+ /* \brief enable trellis for P frames/fields */
+ uint64_t enable_trellis_P : 1;
+ /* \brief enable trellis for B frames/fields */
+ uint64_t enable_trellis_B : 1;
+ uint64_t reserved : 28;
+ } bits;
+ uint64_t value;
+ } quantization_flags;
+} VAEncMiscParameterQuantization;
+
+/**
* \brief Encoding skip frame.
*
* The application may choose to skip frames externally to the encoder (e.g. drop completely or
* 2: The current frame is to be skipped, do not encode it but pack/encrypt the packed header contents
* (all except VAEncPackedHeaderSlice) which could contain actual frame contents (e.g. pack the frame
* in VAEncPackedHeaderPicture). */
- unsigned char skip_frame_flag;
+ uint8_t skip_frame_flag;
/** \brief The number of frames skipped prior to the current frame. Valid when skip_frame_flag = 1. */
- unsigned char num_skip_frames;
+ uint8_t num_skip_frames;
/** \brief When skip_frame_flag = 1, the size of the skipped frames in bits. When skip_frame_flag = 2,
* the size of the current skipped frame that is to be packed/encrypted in bits. */
- unsigned int size_skip_frames;
+ uint32_t size_skip_frames;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterSkipFrame;
/**
* VAConfigAttribRateControl != VA_RC_CQP. \ref roi_value specifies ROI_delta QP if \c roi_value_is_qp_delta
* in VAEncMiscParameterBufferROI is 1, otherwise \ref roi_value specifies ROI priority.
*/
- char roi_value;
+ int8_t roi_value;
} VAEncROI;
typedef struct _VAEncMiscParameterBufferROI {
/** \brief Number of ROIs being sent.*/
- unsigned int num_roi;
+ uint32_t num_roi;
/** \brief Valid when VAConfigAttribRateControl != VA_RC_CQP, then the encoder's
* rate control will determine actual delta QPs. Specifies the max/min allowed delta
* QPs. */
- char max_delta_qp;
- char min_delta_qp;
+ int8_t max_delta_qp;
+ int8_t min_delta_qp;
/** \brief Pointer to a VAEncROI array with num_roi elements. It is relative to frame
* coordinates for the frame case and to field coordinates for the field case.*/
* in #VAEncROI should be used as ROI priority.
*
* \ref roi_value_is_qp_delta is only available when VAConfigAttribRateControl != VA_RC_CQP,
- * the setting must comply with \c roi_rc_priority_support and \c roi_rc_qp_delat_support in
+ * the setting must comply with \c roi_rc_priority_support and \c roi_rc_qp_delta_support in
* #VAConfigAttribValEncROI. The underlying driver should ignore this field
* when VAConfigAttribRateControl == VA_RC_CQP.
*/
} bits;
uint32_t value;
} roi_flags;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncMiscParameterBufferROI;
+/*
+ * \brief Dirty rectangle data structure for encoding.
+ *
+ * The encoding dirty rect can be set through VAEncMiscParameterBufferDirtyRect, if the
+ * implementation supports dirty rect input. The rect set through this structure is applicable
+ * only to the current frame or field, so must be sent every frame or field to be applied.
+ * The number of supported rects can be queried through the VAConfigAttribEncDirtyRect. The
+ * encoder will use the rect information to know those rectangle areas have changed while the
+ * areas not covered by dirty rect rectangles are assumed to have not changed compared to the
+ * previous picture. The encoder may do some internal optimizations.
+ */
+typedef struct _VAEncMiscParameterBufferDirtyRect
+{
+ /** \brief Number of Rectangle being sent.*/
+ uint32_t num_roi_rectangle;
+
+ /** \brief Pointer to a VARectangle array with num_roi_rectangle elements.*/
+ VARectangle *roi_rectangle;
+} VAEncMiscParameterBufferDirtyRect;
+
+/** \brief Attribute value for VAConfigAttribEncParallelRateControl */
+typedef struct _VAEncMiscParameterParallelRateControl {
+ /** brief Number of layers*/
+ uint32_t num_layers;
+ /** brief Number of B frames per layer per GOP.
+ *
+ * it should be allocated by application, and the is num_layers.
+ * num_b_in_gop[0] is the number of regular B which refers to only I or P frames. */
+ uint32_t *num_b_in_gop;
+} VAEncMiscParameterParallelRateControl;
+
+/** per frame encoder quality controls, once set they will persist for all future frames
+ *till it is updated again. */
+typedef struct _VAEncMiscParameterEncQuality
+{
+ union
+ {
+ struct
+ {
+ /** Use raw frames for reference instead of reconstructed frames.
+ * it only impact motion estimation (ME) stage, and will not impact MC stage
+ * so the reconstruct picture will can match with decode side */
+ uint32_t useRawPicForRef : 1;
+ /** Disables skip check for ME stage, it will increase the bistream size
+ * but will improve the qulity */
+ uint32_t skipCheckDisable : 1;
+ /** Indicates app will override default driver FTQ settings using FTQEnable.
+ * FTQ is forward transform quantization */
+ uint32_t FTQOverride : 1;
+ /** Enables/disables FTQ. */
+ uint32_t FTQEnable : 1;
+ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
+ * enabled (FTQSkipThresholdLUT), else default driver thresholds will be used. */
+ uint32_t FTQSkipThresholdLUTInput : 1;
+ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
+ * disabled (NonFTQSkipThresholdLUT), else default driver thresholds will be used. */
+ uint32_t NonFTQSkipThresholdLUTInput : 1;
+ uint32_t ReservedBit : 1;
+ /** Control to enable the ME mode decision algorithm to bias to fewer B Direct/Skip types.
+ * Applies only to B frames, all other frames will ignore this setting. */
+ uint32_t directBiasAdjustmentEnable : 1;
+ /** Enables global motion bias. global motion also is called HME (Heirarchical Motion Estimation )
+ * HME is used to handle large motions and avoiding local minima in the video encoding process
+ * down scaled the input and reference picture, then do ME. the result will be a predictor to next level HME or ME
+ * current interface divide the HME to 3 level. UltraHME , SuperHME, and HME, result of UltraHME will be input of SurperHME,
+ * result of superHME will be a input for HME. HME result will be input of ME. it is a switch for HMEMVCostScalingFactor
+ * can change the HME bias inside RDO stage*/
+ uint32_t globalMotionBiasAdjustmentEnable : 1;
+ /** MV cost scaling ratio for HME ( predictors. It is used when
+ * globalMotionBiasAdjustmentEnable == 1, else it is ignored. Values are:
+ * 0: set MV cost to be 0 for HME predictor.
+ * 1: scale MV cost to be 1/2 of the default value for HME predictor.
+ * 2: scale MV cost to be 1/4 of the default value for HME predictor.
+ * 3: scale MV cost to be 1/8 of the default value for HME predictor. */
+ uint32_t HMEMVCostScalingFactor : 2;
+ /**disable HME, if it is disabled. Super*ultraHME should also be disabled */
+ uint32_t HMEDisable : 1;
+ /**disable Super HME, if it is disabled, ultraHME should be disabled */
+ uint32_t SuperHMEDisable : 1;
+ /** disable Ultra HME */
+ uint32_t UltraHMEDisable : 1;
+ /** disable panic mode. Panic mode happened when there are extreme BRC (bit rate control) requirement
+ * frame size cant achieve the target of BRC. when Panic mode is triggered, Coefficients will
+ * be set to zero. disable panic mode will improve quality but will impact BRC */
+ uint32_t PanicModeDisable : 1;
+ /** Force RepartitionCheck
+ * 0: DEFAULT - follow driver default settings.
+ * 1: FORCE_ENABLE - enable this feature totally for all cases.
+ * 2: FORCE_DISABLE - disable this feature totally for all cases. */
+ uint32_t ForceRepartitionCheck : 2;
+
+ };
+ uint32_t encControls;
+ };
+
+ /** Maps QP to skip thresholds when FTQ is enabled. Valid range is 0-255. */
+ uint8_t FTQSkipThresholdLUT[52];
+ /** Maps QP to skip thresholds when FTQ is disabled. Valid range is 0-65535. */
+ uint16_t NonFTQSkipThresholdLUT[52];
+
+ uint32_t reserved[VA_PADDING_HIGH]; // Reserved for future use.
+
+} VAEncMiscParameterEncQuality;
/**
+ * \brief Custom Encoder Rounding Offset Control.
+ * Application may use this structure to set customized rounding
+ * offset parameters for quantization.
+ * Valid when \c VAConfigAttribCustomRoundingControl equals 1.
+ */
+typedef struct _VAEncMiscParameterCustomRoundingControl
+{
+ union {
+ struct {
+ /** \brief Enable customized rounding offset for intra blocks.
+ * If 0, default value would be taken by driver for intra
+ * rounding offset.
+ */
+ uint32_t enable_custom_rouding_intra : 1 ;
+
+ /** \brief Intra rounding offset
+ * Ignored if \c enable_custom_rouding_intra equals 0.
+ */
+ uint32_t rounding_offset_intra : 7;
+
+ /** \brief Enable customized rounding offset for inter blocks.
+ * If 0, default value would be taken by driver for inter
+ * rounding offset.
+ */
+ uint32_t enable_custom_rounding_inter : 1 ;
+
+ /** \brief Inter rounding offset
+ * Ignored if \c enable_custom_rouding_inter equals 0.
+ */
+ uint32_t rounding_offset_inter : 7;
+
+ /* Reserved */
+ uint32_t reserved :16;
+ } bits;
+ uint32_t value;
+ } rounding_offset_setting;
+} VAEncMiscParameterCustomRoundingControl;
+/**
* There will be cases where the bitstream buffer will not have enough room to hold
* the data for the entire slice, and the following flags will be used in the slice
* parameter to signal to the server for the possible cases.
/* Codec-independent Slice Parameter Buffer base */
typedef struct _VASliceParameterBufferBase
{
- unsigned int slice_data_size; /* number of bytes in the slice data buffer for this slice */
- unsigned int slice_data_offset; /* the offset to the first byte of slice data */
- unsigned int slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX definitions */
+ uint32_t slice_data_size; /* number of bytes in the slice data buffer for this slice */
+ uint32_t slice_data_offset; /* the offset to the first byte of slice data */
+ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX definitions */
} VASliceParameterBufferBase;
/**********************************
*/
typedef struct _VAHuffmanTableBufferJPEGBaseline {
/** \brief Specifies which #huffman_table is valid. */
- unsigned char load_huffman_table[2];
+ uint8_t load_huffman_table[2];
/** \brief Huffman tables indexed by table identifier (Th). */
struct {
/** @name DC table (up to 12 categories) */
/**@{*/
/** \brief Number of Huffman codes of length i + 1 (Li). */
- unsigned char num_dc_codes[16];
+ uint8_t num_dc_codes[16];
/** \brief Value associated with each Huffman code (Vij). */
- unsigned char dc_values[12];
+ uint8_t dc_values[12];
/**@}*/
/** @name AC table (2 special codes + up to 16 * 10 codes) */
/**@{*/
/** \brief Number of Huffman codes of length i + 1 (Li). */
- unsigned char num_ac_codes[16];
+ uint8_t num_ac_codes[16];
/** \brief Value associated with each Huffman code (Vij). */
- unsigned char ac_values[162];
+ uint8_t ac_values[162];
/** \brief Padding to 4-byte boundaries. Must be set to zero. */
- unsigned char pad[2];
+ uint8_t pad[2];
/**@}*/
} huffman_table[2];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAHuffmanTableBufferJPEGBaseline;
/****************************
*/
typedef struct _VAPictureParameterBufferMPEG2
{
- unsigned short horizontal_size;
- unsigned short vertical_size;
+ uint16_t horizontal_size;
+ uint16_t vertical_size;
VASurfaceID forward_reference_picture;
VASurfaceID backward_reference_picture;
/* meanings of the following fields are the same as in the standard */
- int picture_coding_type;
- int f_code; /* pack all four fcode into this */
+ int32_t picture_coding_type;
+ int32_t f_code; /* pack all four fcode into this */
union {
struct {
- unsigned int intra_dc_precision : 2;
- unsigned int picture_structure : 2;
- unsigned int top_field_first : 1;
- unsigned int frame_pred_frame_dct : 1;
- unsigned int concealment_motion_vectors : 1;
- unsigned int q_scale_type : 1;
- unsigned int intra_vlc_format : 1;
- unsigned int alternate_scan : 1;
- unsigned int repeat_first_field : 1;
- unsigned int progressive_frame : 1;
- unsigned int is_first_field : 1; /* indicate whether the current field
+ uint32_t intra_dc_precision : 2;
+ uint32_t picture_structure : 2;
+ uint32_t top_field_first : 1;
+ uint32_t frame_pred_frame_dct : 1;
+ uint32_t concealment_motion_vectors : 1;
+ uint32_t q_scale_type : 1;
+ uint32_t intra_vlc_format : 1;
+ uint32_t alternate_scan : 1;
+ uint32_t repeat_first_field : 1;
+ uint32_t progressive_frame : 1;
+ uint32_t is_first_field : 1; /* indicate whether the current field
* is the first field for field picture
*/
} bits;
- unsigned int value;
+ uint32_t value;
} picture_coding_extension;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAPictureParameterBufferMPEG2;
/** MPEG-2 Inverse Quantization Matrix Buffer */
typedef struct _VAIQMatrixBufferMPEG2
{
/** \brief Same as the MPEG-2 bitstream syntax element. */
- int load_intra_quantiser_matrix;
+ int32_t load_intra_quantiser_matrix;
/** \brief Same as the MPEG-2 bitstream syntax element. */
- int load_non_intra_quantiser_matrix;
+ int32_t load_non_intra_quantiser_matrix;
/** \brief Same as the MPEG-2 bitstream syntax element. */
- int load_chroma_intra_quantiser_matrix;
+ int32_t load_chroma_intra_quantiser_matrix;
/** \brief Same as the MPEG-2 bitstream syntax element. */
- int load_chroma_non_intra_quantiser_matrix;
+ int32_t load_chroma_non_intra_quantiser_matrix;
/** \brief Luminance intra matrix, in zig-zag scan order. */
- unsigned char intra_quantiser_matrix[64];
+ uint8_t intra_quantiser_matrix[64];
/** \brief Luminance non-intra matrix, in zig-zag scan order. */
- unsigned char non_intra_quantiser_matrix[64];
+ uint8_t non_intra_quantiser_matrix[64];
/** \brief Chroma intra matrix, in zig-zag scan order. */
- unsigned char chroma_intra_quantiser_matrix[64];
+ uint8_t chroma_intra_quantiser_matrix[64];
/** \brief Chroma non-intra matrix, in zig-zag scan order. */
- unsigned char chroma_non_intra_quantiser_matrix[64];
+ uint8_t chroma_non_intra_quantiser_matrix[64];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAIQMatrixBufferMPEG2;
/** MPEG-2 Slice Parameter Buffer */
typedef struct _VASliceParameterBufferMPEG2
{
- unsigned int slice_data_size;/* number of bytes in the slice data buffer for this slice */
- unsigned int slice_data_offset;/* the offset to the first byte of slice data */
- unsigned int slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
- unsigned int macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
- unsigned int slice_horizontal_position;
- unsigned int slice_vertical_position;
- int quantiser_scale_code;
- int intra_slice_flag;
+ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
+ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
+ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
+ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
+ uint32_t slice_horizontal_position;
+ uint32_t slice_vertical_position;
+ int32_t quantiser_scale_code;
+ int32_t intra_slice_flag;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VASliceParameterBufferMPEG2;
/** MPEG-2 Macroblock Parameter Buffer */
typedef struct _VAMacroblockParameterBufferMPEG2
{
- unsigned short macroblock_address;
+ uint16_t macroblock_address;
/*
* macroblock_address (in raster scan order)
* top-left: 0
* bottom-right: picture-height-in-mb*picture-width-in-mb - 1
*/
- unsigned char macroblock_type; /* see definition below */
+ uint8_t macroblock_type; /* see definition below */
union {
struct {
- unsigned int frame_motion_type : 2;
- unsigned int field_motion_type : 2;
- unsigned int dct_type : 1;
+ uint32_t frame_motion_type : 2;
+ uint32_t field_motion_type : 2;
+ uint32_t dct_type : 1;
} bits;
- unsigned int value;
+ uint32_t value;
} macroblock_modes;
- unsigned char motion_vertical_field_select;
+ uint8_t motion_vertical_field_select;
/*
* motion_vertical_field_select:
* see section 6.3.17.2 in the spec
* bit 2: second vector forward
* bit 3: second vector backward
*/
- short PMV[2][2][2]; /* see Table 7-7 in the spec */
- unsigned short coded_block_pattern;
+ int16_t PMV[2][2][2]; /* see Table 7-7 in the spec */
+ uint16_t coded_block_pattern;
/*
* The bitplanes for coded_block_pattern are described
* in Figure 6.10-12 in the spec
*/
/* Number of skipped macroblocks after this macroblock */
- unsigned short num_skipped_macroblocks;
+ uint16_t num_skipped_macroblocks;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAMacroblockParameterBufferMPEG2;
/*
*/
typedef struct _VAPictureParameterBufferMPEG4
{
- unsigned short vop_width;
- unsigned short vop_height;
+ uint16_t vop_width;
+ uint16_t vop_height;
VASurfaceID forward_reference_picture;
VASurfaceID backward_reference_picture;
union {
struct {
- unsigned int short_video_header : 1;
- unsigned int chroma_format : 2;
- unsigned int interlaced : 1;
- unsigned int obmc_disable : 1;
- unsigned int sprite_enable : 2;
- unsigned int sprite_warping_accuracy : 2;
- unsigned int quant_type : 1;
- unsigned int quarter_sample : 1;
- unsigned int data_partitioned : 1;
- unsigned int reversible_vlc : 1;
- unsigned int resync_marker_disable : 1;
+ uint32_t short_video_header : 1;
+ uint32_t chroma_format : 2;
+ uint32_t interlaced : 1;
+ uint32_t obmc_disable : 1;
+ uint32_t sprite_enable : 2;
+ uint32_t sprite_warping_accuracy : 2;
+ uint32_t quant_type : 1;
+ uint32_t quarter_sample : 1;
+ uint32_t data_partitioned : 1;
+ uint32_t reversible_vlc : 1;
+ uint32_t resync_marker_disable : 1;
} bits;
- unsigned int value;
+ uint32_t value;
} vol_fields;
- unsigned char no_of_sprite_warping_points;
- short sprite_trajectory_du[3];
- short sprite_trajectory_dv[3];
- unsigned char quant_precision;
+ uint8_t no_of_sprite_warping_points;
+ int16_t sprite_trajectory_du[3];
+ int16_t sprite_trajectory_dv[3];
+ uint8_t quant_precision;
union {
struct {
- unsigned int vop_coding_type : 2;
- unsigned int backward_reference_vop_coding_type : 2;
- unsigned int vop_rounding_type : 1;
- unsigned int intra_dc_vlc_thr : 3;
- unsigned int top_field_first : 1;
- unsigned int alternate_vertical_scan_flag : 1;
+ uint32_t vop_coding_type : 2;
+ uint32_t backward_reference_vop_coding_type : 2;
+ uint32_t vop_rounding_type : 1;
+ uint32_t intra_dc_vlc_thr : 3;
+ uint32_t top_field_first : 1;
+ uint32_t alternate_vertical_scan_flag : 1;
} bits;
- unsigned int value;
+ uint32_t value;
} vop_fields;
- unsigned char vop_fcode_forward;
- unsigned char vop_fcode_backward;
- unsigned short vop_time_increment_resolution;
+ uint8_t vop_fcode_forward;
+ uint8_t vop_fcode_backward;
+ uint16_t vop_time_increment_resolution;
/* short header related */
- unsigned char num_gobs_in_vop;
- unsigned char num_macroblocks_in_gob;
+ uint8_t num_gobs_in_vop;
+ uint8_t num_macroblocks_in_gob;
/* for direct mode prediction */
- short TRB;
- short TRD;
+ int16_t TRB;
+ int16_t TRD;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAPictureParameterBufferMPEG4;
/** MPEG-4 Inverse Quantization Matrix Buffer */
typedef struct _VAIQMatrixBufferMPEG4
{
/** Same as the MPEG-4:2 bitstream syntax element. */
- int load_intra_quant_mat;
+ int32_t load_intra_quant_mat;
/** Same as the MPEG-4:2 bitstream syntax element. */
- int load_non_intra_quant_mat;
+ int32_t load_non_intra_quant_mat;
/** The matrix for intra blocks, in zig-zag scan order. */
- unsigned char intra_quant_mat[64];
+ uint8_t intra_quant_mat[64];
/** The matrix for non-intra blocks, in zig-zag scan order. */
- unsigned char non_intra_quant_mat[64];
+ uint8_t non_intra_quant_mat[64];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAIQMatrixBufferMPEG4;
/** MPEG-4 Slice Parameter Buffer */
typedef struct _VASliceParameterBufferMPEG4
{
- unsigned int slice_data_size;/* number of bytes in the slice data buffer for this slice */
- unsigned int slice_data_offset;/* the offset to the first byte of slice data */
- unsigned int slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
- unsigned int macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
- unsigned int macroblock_number;
- int quant_scale;
+ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
+ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
+ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
+ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
+ uint32_t macroblock_number;
+ int32_t quant_scale;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VASliceParameterBufferMPEG4;
/**
/* sequence layer for AP or meta data for SP and MP */
union {
struct {
- unsigned int pulldown : 1; /* SEQUENCE_LAYER::PULLDOWN */
- unsigned int interlace : 1; /* SEQUENCE_LAYER::INTERLACE */
- unsigned int tfcntrflag : 1; /* SEQUENCE_LAYER::TFCNTRFLAG */
- unsigned int finterpflag : 1; /* SEQUENCE_LAYER::FINTERPFLAG */
- unsigned int psf : 1; /* SEQUENCE_LAYER::PSF */
- unsigned int multires : 1; /* METADATA::MULTIRES */
- unsigned int overlap : 1; /* METADATA::OVERLAP */
- unsigned int syncmarker : 1; /* METADATA::SYNCMARKER */
- unsigned int rangered : 1; /* METADATA::RANGERED */
- unsigned int max_b_frames : 3; /* METADATA::MAXBFRAMES */
- unsigned int profile : 2; /* SEQUENCE_LAYER::PROFILE or The MSB of METADATA::PROFILE */
+ uint32_t pulldown : 1; /* SEQUENCE_LAYER::PULLDOWN */
+ uint32_t interlace : 1; /* SEQUENCE_LAYER::INTERLACE */
+ uint32_t tfcntrflag : 1; /* SEQUENCE_LAYER::TFCNTRFLAG */
+ uint32_t finterpflag : 1; /* SEQUENCE_LAYER::FINTERPFLAG */
+ uint32_t psf : 1; /* SEQUENCE_LAYER::PSF */
+ uint32_t multires : 1; /* METADATA::MULTIRES */
+ uint32_t overlap : 1; /* METADATA::OVERLAP */
+ uint32_t syncmarker : 1; /* METADATA::SYNCMARKER */
+ uint32_t rangered : 1; /* METADATA::RANGERED */
+ uint32_t max_b_frames : 3; /* METADATA::MAXBFRAMES */
+ uint32_t profile : 2; /* SEQUENCE_LAYER::PROFILE or The MSB of METADATA::PROFILE */
} bits;
- unsigned int value;
+ uint32_t value;
} sequence_fields;
- unsigned short coded_width; /* ENTRY_POINT_LAYER::CODED_WIDTH */
- unsigned short coded_height; /* ENTRY_POINT_LAYER::CODED_HEIGHT */
+ uint16_t coded_width; /* ENTRY_POINT_LAYER::CODED_WIDTH */
+ uint16_t coded_height; /* ENTRY_POINT_LAYER::CODED_HEIGHT */
union {
struct {
- unsigned int broken_link : 1; /* ENTRY_POINT_LAYER::BROKEN_LINK */
- unsigned int closed_entry : 1; /* ENTRY_POINT_LAYER::CLOSED_ENTRY */
- unsigned int panscan_flag : 1; /* ENTRY_POINT_LAYER::PANSCAN_FLAG */
- unsigned int loopfilter : 1; /* ENTRY_POINT_LAYER::LOOPFILTER */
+ uint32_t broken_link : 1; /* ENTRY_POINT_LAYER::BROKEN_LINK */
+ uint32_t closed_entry : 1; /* ENTRY_POINT_LAYER::CLOSED_ENTRY */
+ uint32_t panscan_flag : 1; /* ENTRY_POINT_LAYER::PANSCAN_FLAG */
+ uint32_t loopfilter : 1; /* ENTRY_POINT_LAYER::LOOPFILTER */
} bits;
- unsigned int value;
+ uint32_t value;
} entrypoint_fields;
- unsigned char conditional_overlap_flag; /* ENTRY_POINT_LAYER::CONDOVER */
- unsigned char fast_uvmc_flag; /* ENTRY_POINT_LAYER::FASTUVMC */
+ uint8_t conditional_overlap_flag; /* ENTRY_POINT_LAYER::CONDOVER */
+ uint8_t fast_uvmc_flag; /* ENTRY_POINT_LAYER::FASTUVMC */
union {
struct {
- unsigned int luma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPY_FLAG */
- unsigned int luma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPY */
- unsigned int chroma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPUV_FLAG */
- unsigned int chroma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPUV */
+ uint32_t luma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPY_FLAG */
+ uint32_t luma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPY */
+ uint32_t chroma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPUV_FLAG */
+ uint32_t chroma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPUV */
} bits;
- unsigned int value;
+ uint32_t value;
} range_mapping_fields;
- unsigned char b_picture_fraction; /* PICTURE_LAYER::BFRACTION */
- unsigned char cbp_table; /* PICTURE_LAYER::CBPTAB/ICBPTAB */
- unsigned char mb_mode_table; /* PICTURE_LAYER::MBMODETAB */
- unsigned char range_reduction_frame;/* PICTURE_LAYER::RANGEREDFRM */
- unsigned char rounding_control; /* PICTURE_LAYER::RNDCTRL */
- unsigned char post_processing; /* PICTURE_LAYER::POSTPROC */
- unsigned char picture_resolution_index; /* PICTURE_LAYER::RESPIC */
- unsigned char luma_scale; /* PICTURE_LAYER::LUMSCALE */
- unsigned char luma_shift; /* PICTURE_LAYER::LUMSHIFT */
+ uint8_t b_picture_fraction; /* Index for PICTURE_LAYER::BFRACTION value in Table 40 (7.1.1.14) */
+ uint8_t cbp_table; /* PICTURE_LAYER::CBPTAB/ICBPTAB */
+ uint8_t mb_mode_table; /* PICTURE_LAYER::MBMODETAB */
+ uint8_t range_reduction_frame;/* PICTURE_LAYER::RANGEREDFRM */
+ uint8_t rounding_control; /* PICTURE_LAYER::RNDCTRL */
+ uint8_t post_processing; /* PICTURE_LAYER::POSTPROC */
+ uint8_t picture_resolution_index; /* PICTURE_LAYER::RESPIC */
+ uint8_t luma_scale; /* PICTURE_LAYER::LUMSCALE */
+ uint8_t luma_shift; /* PICTURE_LAYER::LUMSHIFT */
+
union {
struct {
- unsigned int picture_type : 3; /* PICTURE_LAYER::PTYPE */
- unsigned int frame_coding_mode : 3; /* PICTURE_LAYER::FCM */
- unsigned int top_field_first : 1; /* PICTURE_LAYER::TFF */
- unsigned int is_first_field : 1; /* set to 1 if it is the first field */
- unsigned int intensity_compensation : 1; /* PICTURE_LAYER::INTCOMP */
+ uint32_t picture_type : 3; /* PICTURE_LAYER::PTYPE */
+ uint32_t frame_coding_mode : 3; /* PICTURE_LAYER::FCM */
+ uint32_t top_field_first : 1; /* PICTURE_LAYER::TFF */
+ uint32_t is_first_field : 1; /* set to 1 if it is the first field */
+ uint32_t intensity_compensation : 1; /* PICTURE_LAYER::INTCOMP */
} bits;
- unsigned int value;
+ uint32_t value;
} picture_fields;
union {
struct {
- unsigned int mv_type_mb : 1; /* PICTURE::MVTYPEMB */
- unsigned int direct_mb : 1; /* PICTURE::DIRECTMB */
- unsigned int skip_mb : 1; /* PICTURE::SKIPMB */
- unsigned int field_tx : 1; /* PICTURE::FIELDTX */
- unsigned int forward_mb : 1; /* PICTURE::FORWARDMB */
- unsigned int ac_pred : 1; /* PICTURE::ACPRED */
- unsigned int overflags : 1; /* PICTURE::OVERFLAGS */
+ uint32_t mv_type_mb : 1; /* PICTURE::MVTYPEMB */
+ uint32_t direct_mb : 1; /* PICTURE::DIRECTMB */
+ uint32_t skip_mb : 1; /* PICTURE::SKIPMB */
+ uint32_t field_tx : 1; /* PICTURE::FIELDTX */
+ uint32_t forward_mb : 1; /* PICTURE::FORWARDMB */
+ uint32_t ac_pred : 1; /* PICTURE::ACPRED */
+ uint32_t overflags : 1; /* PICTURE::OVERFLAGS */
} flags;
- unsigned int value;
+ uint32_t value;
} raw_coding;
union {
struct {
- unsigned int bp_mv_type_mb : 1; /* PICTURE::MVTYPEMB */
- unsigned int bp_direct_mb : 1; /* PICTURE::DIRECTMB */
- unsigned int bp_skip_mb : 1; /* PICTURE::SKIPMB */
- unsigned int bp_field_tx : 1; /* PICTURE::FIELDTX */
- unsigned int bp_forward_mb : 1; /* PICTURE::FORWARDMB */
- unsigned int bp_ac_pred : 1; /* PICTURE::ACPRED */
- unsigned int bp_overflags : 1; /* PICTURE::OVERFLAGS */
+ uint32_t bp_mv_type_mb : 1; /* PICTURE::MVTYPEMB */
+ uint32_t bp_direct_mb : 1; /* PICTURE::DIRECTMB */
+ uint32_t bp_skip_mb : 1; /* PICTURE::SKIPMB */
+ uint32_t bp_field_tx : 1; /* PICTURE::FIELDTX */
+ uint32_t bp_forward_mb : 1; /* PICTURE::FORWARDMB */
+ uint32_t bp_ac_pred : 1; /* PICTURE::ACPRED */
+ uint32_t bp_overflags : 1; /* PICTURE::OVERFLAGS */
} flags;
- unsigned int value;
+ uint32_t value;
} bitplane_present; /* signal what bitplane is being passed via the bitplane buffer */
union {
struct {
- unsigned int reference_distance_flag : 1;/* PICTURE_LAYER::REFDIST_FLAG */
- unsigned int reference_distance : 5;/* PICTURE_LAYER::REFDIST */
- unsigned int num_reference_pictures: 1;/* PICTURE_LAYER::NUMREF */
- unsigned int reference_field_pic_indicator : 1;/* PICTURE_LAYER::REFFIELD */
+ uint32_t reference_distance_flag : 1;/* PICTURE_LAYER::REFDIST_FLAG */
+ uint32_t reference_distance : 5;/* PICTURE_LAYER::REFDIST */
+ uint32_t num_reference_pictures: 1;/* PICTURE_LAYER::NUMREF */
+ uint32_t reference_field_pic_indicator : 1;/* PICTURE_LAYER::REFFIELD */
} bits;
- unsigned int value;
+ uint32_t value;
} reference_fields;
union {
struct {
- unsigned int mv_mode : 3; /* PICTURE_LAYER::MVMODE */
- unsigned int mv_mode2 : 3; /* PICTURE_LAYER::MVMODE2 */
- unsigned int mv_table : 3; /* PICTURE_LAYER::MVTAB/IMVTAB */
- unsigned int two_mv_block_pattern_table: 2; /* PICTURE_LAYER::2MVBPTAB */
- unsigned int four_mv_switch : 1; /* PICTURE_LAYER::4MVSWITCH */
- unsigned int four_mv_block_pattern_table : 2; /* PICTURE_LAYER::4MVBPTAB */
- unsigned int extended_mv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_MV */
- unsigned int extended_mv_range : 2; /* PICTURE_LAYER::MVRANGE */
- unsigned int extended_dmv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_DMV */
- unsigned int extended_dmv_range : 2; /* PICTURE_LAYER::DMVRANGE */
+ uint32_t mv_mode : 3; /* PICTURE_LAYER::MVMODE */
+ uint32_t mv_mode2 : 3; /* PICTURE_LAYER::MVMODE2 */
+ uint32_t mv_table : 3; /* PICTURE_LAYER::MVTAB/IMVTAB */
+ uint32_t two_mv_block_pattern_table: 2; /* PICTURE_LAYER::2MVBPTAB */
+ uint32_t four_mv_switch : 1; /* PICTURE_LAYER::4MVSWITCH */
+ uint32_t four_mv_block_pattern_table : 2; /* PICTURE_LAYER::4MVBPTAB */
+ uint32_t extended_mv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_MV */
+ uint32_t extended_mv_range : 2; /* PICTURE_LAYER::MVRANGE */
+ uint32_t extended_dmv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_DMV */
+ uint32_t extended_dmv_range : 2; /* PICTURE_LAYER::DMVRANGE */
} bits;
- unsigned int value;
+ uint32_t value;
} mv_fields;
union {
struct {
- unsigned int dquant : 2; /* ENTRY_POINT_LAYER::DQUANT */
- unsigned int quantizer : 2; /* ENTRY_POINT_LAYER::QUANTIZER */
- unsigned int half_qp : 1; /* PICTURE_LAYER::HALFQP */
- unsigned int pic_quantizer_scale : 5;/* PICTURE_LAYER::PQUANT */
- unsigned int pic_quantizer_type : 1;/* PICTURE_LAYER::PQUANTIZER */
- unsigned int dq_frame : 1; /* VOPDQUANT::DQUANTFRM */
- unsigned int dq_profile : 2; /* VOPDQUANT::DQPROFILE */
- unsigned int dq_sb_edge : 2; /* VOPDQUANT::DQSBEDGE */
- unsigned int dq_db_edge : 2; /* VOPDQUANT::DQDBEDGE */
- unsigned int dq_binary_level : 1; /* VOPDQUANT::DQBILEVEL */
- unsigned int alt_pic_quantizer : 5;/* VOPDQUANT::ALTPQUANT */
+ uint32_t dquant : 2; /* ENTRY_POINT_LAYER::DQUANT */
+ uint32_t quantizer : 2; /* ENTRY_POINT_LAYER::QUANTIZER */
+ uint32_t half_qp : 1; /* PICTURE_LAYER::HALFQP */
+ uint32_t pic_quantizer_scale : 5;/* PICTURE_LAYER::PQUANT */
+ uint32_t pic_quantizer_type : 1;/* PICTURE_LAYER::PQUANTIZER */
+ uint32_t dq_frame : 1; /* VOPDQUANT::DQUANTFRM */
+ uint32_t dq_profile : 2; /* VOPDQUANT::DQPROFILE */
+ uint32_t dq_sb_edge : 2; /* VOPDQUANT::DQSBEDGE */
+ uint32_t dq_db_edge : 2; /* VOPDQUANT::DQDBEDGE */
+ uint32_t dq_binary_level : 1; /* VOPDQUANT::DQBILEVEL */
+ uint32_t alt_pic_quantizer : 5;/* VOPDQUANT::ALTPQUANT */
} bits;
- unsigned int value;
+ uint32_t value;
} pic_quantizer_fields;
union {
struct {
- unsigned int variable_sized_transform_flag : 1;/* ENTRY_POINT_LAYER::VSTRANSFORM */
- unsigned int mb_level_transform_type_flag : 1;/* PICTURE_LAYER::TTMBF */
- unsigned int frame_level_transform_type : 2;/* PICTURE_LAYER::TTFRM */
- unsigned int transform_ac_codingset_idx1 : 2;/* PICTURE_LAYER::TRANSACFRM */
- unsigned int transform_ac_codingset_idx2 : 2;/* PICTURE_LAYER::TRANSACFRM2 */
- unsigned int intra_transform_dc_table : 1;/* PICTURE_LAYER::TRANSDCTAB */
+ uint32_t variable_sized_transform_flag : 1;/* ENTRY_POINT_LAYER::VSTRANSFORM */
+ uint32_t mb_level_transform_type_flag : 1;/* PICTURE_LAYER::TTMBF */
+ uint32_t frame_level_transform_type : 2;/* PICTURE_LAYER::TTFRM */
+ uint32_t transform_ac_codingset_idx1 : 2;/* PICTURE_LAYER::TRANSACFRM */
+ uint32_t transform_ac_codingset_idx2 : 2;/* PICTURE_LAYER::TRANSACFRM2 */
+ uint32_t intra_transform_dc_table : 1;/* PICTURE_LAYER::TRANSDCTAB */
} bits;
- unsigned int value;
+ uint32_t value;
} transform_fields;
+
+ uint8_t luma_scale2; /* PICTURE_LAYER::LUMSCALE2 */
+ uint8_t luma_shift2; /* PICTURE_LAYER::LUMSHIFT2 */
+ uint8_t intensity_compensation_field; /* Index for PICTURE_LAYER::INTCOMPFIELD value in Table 109 (9.1.1.48) */
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_MEDIUM - 1];
} VAPictureParameterBufferVC1;
/** VC-1 Bitplane Buffer
/* VC-1 Slice Parameter Buffer */
typedef struct _VASliceParameterBufferVC1
{
- unsigned int slice_data_size;/* number of bytes in the slice data buffer for this slice */
- unsigned int slice_data_offset;/* the offset to the first byte of slice data */
- unsigned int slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
- unsigned int macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
- unsigned int slice_vertical_position;
+ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
+ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
+ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
+ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
+ uint32_t slice_vertical_position;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VASliceParameterBufferVC1;
/* VC-1 Slice Data Buffer */
typedef struct _VAPictureH264
{
VASurfaceID picture_id;
- unsigned int frame_idx;
- unsigned int flags;
- signed int TopFieldOrderCnt;
- signed int BottomFieldOrderCnt;
+ uint32_t frame_idx;
+ uint32_t flags;
+ int32_t TopFieldOrderCnt;
+ int32_t BottomFieldOrderCnt;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAPictureH264;
/* flags in VAPictureH264 could be OR of the following */
#define VA_PICTURE_H264_INVALID 0x00000001
{
VAPictureH264 CurrPic;
VAPictureH264 ReferenceFrames[16]; /* in DPB */
- unsigned short picture_width_in_mbs_minus1;
- unsigned short picture_height_in_mbs_minus1;
- unsigned char bit_depth_luma_minus8;
- unsigned char bit_depth_chroma_minus8;
- unsigned char num_ref_frames;
+ uint16_t picture_width_in_mbs_minus1;
+ uint16_t picture_height_in_mbs_minus1;
+ uint8_t bit_depth_luma_minus8;
+ uint8_t bit_depth_chroma_minus8;
+ uint8_t num_ref_frames;
union {
struct {
- unsigned int chroma_format_idc : 2;
- unsigned int residual_colour_transform_flag : 1;
- unsigned int gaps_in_frame_num_value_allowed_flag : 1;
- unsigned int frame_mbs_only_flag : 1;
- unsigned int mb_adaptive_frame_field_flag : 1;
- unsigned int direct_8x8_inference_flag : 1;
- unsigned int MinLumaBiPredSize8x8 : 1; /* see A.3.3.2 */
- unsigned int log2_max_frame_num_minus4 : 4;
- unsigned int pic_order_cnt_type : 2;
- unsigned int log2_max_pic_order_cnt_lsb_minus4 : 4;
- unsigned int delta_pic_order_always_zero_flag : 1;
+ uint32_t chroma_format_idc : 2;
+ uint32_t residual_colour_transform_flag : 1; /* Renamed to separate_colour_plane_flag in newer standard versions. */
+ uint32_t gaps_in_frame_num_value_allowed_flag : 1;
+ uint32_t frame_mbs_only_flag : 1;
+ uint32_t mb_adaptive_frame_field_flag : 1;
+ uint32_t direct_8x8_inference_flag : 1;
+ uint32_t MinLumaBiPredSize8x8 : 1; /* see A.3.3.2 */
+ uint32_t log2_max_frame_num_minus4 : 4;
+ uint32_t pic_order_cnt_type : 2;
+ uint32_t log2_max_pic_order_cnt_lsb_minus4 : 4;
+ uint32_t delta_pic_order_always_zero_flag : 1;
} bits;
- unsigned int value;
+ uint32_t value;
} seq_fields;
- unsigned char num_slice_groups_minus1;
- unsigned char slice_group_map_type;
- unsigned short slice_group_change_rate_minus1;
- signed char pic_init_qp_minus26;
- signed char pic_init_qs_minus26;
- signed char chroma_qp_index_offset;
- signed char second_chroma_qp_index_offset;
+ // FMO is not supported.
+ va_deprecated uint8_t num_slice_groups_minus1;
+ va_deprecated uint8_t slice_group_map_type;
+ va_deprecated uint16_t slice_group_change_rate_minus1;
+ int8_t pic_init_qp_minus26;
+ int8_t pic_init_qs_minus26;
+ int8_t chroma_qp_index_offset;
+ int8_t second_chroma_qp_index_offset;
union {
struct {
- unsigned int entropy_coding_mode_flag : 1;
- unsigned int weighted_pred_flag : 1;
- unsigned int weighted_bipred_idc : 2;
- unsigned int transform_8x8_mode_flag : 1;
- unsigned int field_pic_flag : 1;
- unsigned int constrained_intra_pred_flag : 1;
- unsigned int pic_order_present_flag : 1;
- unsigned int deblocking_filter_control_present_flag : 1;
- unsigned int redundant_pic_cnt_present_flag : 1;
- unsigned int reference_pic_flag : 1; /* nal_ref_idc != 0 */
+ uint32_t entropy_coding_mode_flag : 1;
+ uint32_t weighted_pred_flag : 1;
+ uint32_t weighted_bipred_idc : 2;
+ uint32_t transform_8x8_mode_flag : 1;
+ uint32_t field_pic_flag : 1;
+ uint32_t constrained_intra_pred_flag : 1;
+ uint32_t pic_order_present_flag : 1; /* Renamed to bottom_field_pic_order_in_frame_present_flag in newer standard versions. */
+ uint32_t deblocking_filter_control_present_flag : 1;
+ uint32_t redundant_pic_cnt_present_flag : 1;
+ uint32_t reference_pic_flag : 1; /* nal_ref_idc != 0 */
} bits;
- unsigned int value;
+ uint32_t value;
} pic_fields;
- unsigned short frame_num;
+ uint16_t frame_num;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_MEDIUM];
} VAPictureParameterBufferH264;
/** H.264 Inverse Quantization Matrix Buffer */
typedef struct _VAIQMatrixBufferH264
{
/** \brief 4x4 scaling list, in raster scan order. */
- unsigned char ScalingList4x4[6][16];
+ uint8_t ScalingList4x4[6][16];
/** \brief 8x8 scaling list, in raster scan order. */
- unsigned char ScalingList8x8[2][64];
-} VAIQMatrixBufferH264;
+ uint8_t ScalingList8x8[2][64];
-/**
- * H.264 Slice Group Map Buffer
- * When VAPictureParameterBufferH264::num_slice_group_minus1 is not equal to 0,
- * A slice group map buffer should be sent for each picture if required. The buffer
- * is sent only when there is a change in the mapping values.
- * The slice group map buffer map "map units" to slice groups as specified in
- * section 8.2.2 of the H.264 spec. The buffer will contain one byte for each macroblock
- * in raster scan order
- */
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
+} VAIQMatrixBufferH264;
/** H.264 Slice Parameter Buffer */
typedef struct _VASliceParameterBufferH264
{
- unsigned int slice_data_size;/* number of bytes in the slice data buffer for this slice */
+ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
/** \brief Byte offset to the NAL Header Unit for this slice. */
- unsigned int slice_data_offset;
- unsigned int slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
+ uint32_t slice_data_offset;
+ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
/**
* \brief Bit offset from NAL Header Unit to the begining of slice_data().
*
* the original bitstream, thus including any emulation prevention
* bytes.
*/
- unsigned short slice_data_bit_offset;
- unsigned short first_mb_in_slice;
- unsigned char slice_type;
- unsigned char direct_spatial_mv_pred_flag;
- unsigned char num_ref_idx_l0_active_minus1;
- unsigned char num_ref_idx_l1_active_minus1;
- unsigned char cabac_init_idc;
- char slice_qp_delta;
- unsigned char disable_deblocking_filter_idc;
- char slice_alpha_c0_offset_div2;
- char slice_beta_offset_div2;
+ uint16_t slice_data_bit_offset;
+ uint16_t first_mb_in_slice;
+ uint8_t slice_type;
+ uint8_t direct_spatial_mv_pred_flag;
+ /**
+ * H264/AVC syntax element
+ *
+ * if num_ref_idx_active_override_flag equals 0, host decoder should
+ * set its value to num_ref_idx_l0_default_active_minus1.
+ */
+ uint8_t num_ref_idx_l0_active_minus1;
+ /**
+ * H264/AVC syntax element
+ *
+ * if num_ref_idx_active_override_flag equals 0, host decoder should
+ * set its value to num_ref_idx_l1_default_active_minus1.
+ */
+ uint8_t num_ref_idx_l1_active_minus1;
+ uint8_t cabac_init_idc;
+ int8_t slice_qp_delta;
+ uint8_t disable_deblocking_filter_idc;
+ int8_t slice_alpha_c0_offset_div2;
+ int8_t slice_beta_offset_div2;
VAPictureH264 RefPicList0[32]; /* See 8.2.4.2 */
VAPictureH264 RefPicList1[32]; /* See 8.2.4.2 */
- unsigned char luma_log2_weight_denom;
- unsigned char chroma_log2_weight_denom;
- unsigned char luma_weight_l0_flag;
- short luma_weight_l0[32];
- short luma_offset_l0[32];
- unsigned char chroma_weight_l0_flag;
- short chroma_weight_l0[32][2];
- short chroma_offset_l0[32][2];
- unsigned char luma_weight_l1_flag;
- short luma_weight_l1[32];
- short luma_offset_l1[32];
- unsigned char chroma_weight_l1_flag;
- short chroma_weight_l1[32][2];
- short chroma_offset_l1[32][2];
+ uint8_t luma_log2_weight_denom;
+ uint8_t chroma_log2_weight_denom;
+ uint8_t luma_weight_l0_flag;
+ int16_t luma_weight_l0[32];
+ int16_t luma_offset_l0[32];
+ uint8_t chroma_weight_l0_flag;
+ int16_t chroma_weight_l0[32][2];
+ int16_t chroma_offset_l0[32][2];
+ uint8_t luma_weight_l1_flag;
+ int16_t luma_weight_l1[32];
+ int16_t luma_offset_l1[32];
+ uint8_t chroma_weight_l1_flag;
+ int16_t chroma_weight_l1[32][2];
+ int16_t chroma_offset_l1[32][2];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VASliceParameterBufferH264;
/****************************
VAEncPictureTypeBidirectional = 2,
} VAEncPictureType;
-/* Encode Slice Parameter Buffer */
+/**
+ * \brief Encode Slice Parameter Buffer.
+ *
+ * @deprecated
+ * This is a deprecated encode slice parameter buffer, All applications
+ * \c can use VAEncSliceParameterBufferXXX (XXX = MPEG2, HEVC, H264, JPEG)
+ */
typedef struct _VAEncSliceParameterBuffer
{
- unsigned int start_row_number; /* starting MB row number for this slice */
- unsigned int slice_height; /* slice height measured in MB */
+ uint32_t start_row_number; /* starting MB row number for this slice */
+ uint32_t slice_height; /* slice height measured in MB */
union {
struct {
- unsigned int is_intra : 1;
- unsigned int disable_deblocking_filter_idc : 2;
- unsigned int uses_long_term_ref :1;
- unsigned int is_long_term_ref :1;
+ uint32_t is_intra : 1;
+ uint32_t disable_deblocking_filter_idc : 2;
+ uint32_t uses_long_term_ref :1;
+ uint32_t is_long_term_ref :1;
} bits;
- unsigned int value;
+ uint32_t value;
} slice_flags;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncSliceParameterBuffer;
typedef struct _VAEncSequenceParameterBufferH263
{
- unsigned int intra_period;
- unsigned int bits_per_second;
- unsigned int frame_rate;
- unsigned int initial_qp;
- unsigned int min_qp;
+ uint32_t intra_period;
+ uint32_t bits_per_second;
+ uint32_t frame_rate;
+ uint32_t initial_qp;
+ uint32_t min_qp;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncSequenceParameterBufferH263;
typedef struct _VAEncPictureParameterBufferH263
VASurfaceID reference_picture;
VASurfaceID reconstructed_picture;
VABufferID coded_buf;
- unsigned short picture_width;
- unsigned short picture_height;
+ uint16_t picture_width;
+ uint16_t picture_height;
VAEncPictureType picture_type;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncPictureParameterBufferH263;
/****************************
typedef struct _VAEncSequenceParameterBufferMPEG4
{
- unsigned char profile_and_level_indication;
- unsigned int intra_period;
- unsigned int video_object_layer_width;
- unsigned int video_object_layer_height;
- unsigned int vop_time_increment_resolution;
- unsigned int fixed_vop_rate;
- unsigned int fixed_vop_time_increment;
- unsigned int bits_per_second;
- unsigned int frame_rate;
- unsigned int initial_qp;
- unsigned int min_qp;
+ uint8_t profile_and_level_indication;
+ uint32_t intra_period;
+ uint32_t video_object_layer_width;
+ uint32_t video_object_layer_height;
+ uint32_t vop_time_increment_resolution;
+ uint32_t fixed_vop_rate;
+ uint32_t fixed_vop_time_increment;
+ uint32_t bits_per_second;
+ uint32_t frame_rate;
+ uint32_t initial_qp;
+ uint32_t min_qp;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncSequenceParameterBufferMPEG4;
typedef struct _VAEncPictureParameterBufferMPEG4
VASurfaceID reference_picture;
VASurfaceID reconstructed_picture;
VABufferID coded_buf;
- unsigned short picture_width;
- unsigned short picture_height;
- unsigned int modulo_time_base; /* number of 1s */
- unsigned int vop_time_increment;
+ uint16_t picture_width;
+ uint16_t picture_height;
+ uint32_t modulo_time_base; /* number of 1s */
+ uint32_t vop_time_increment;
VAEncPictureType picture_type;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAEncPictureParameterBufferMPEG4;
);
/**
+ * Create a buffer for given width & height get unit_size, pitch, buf_id for 2D buffer
+ * for permb qp buffer, it will return unit_size for one MB or LCU and the pitch for alignments
+ * can call vaMapBuffer with this Buffer ID to get virtual address.
+ * e.g. AVC 1080P encode, 1920x1088, the size in MB is 120x68,but inside driver,
+ * maybe it should align with 256, and one byte present one Qp.so, call the function.
+ * then get unit_size = 1, pitch = 256. call vaMapBuffer to get the virtual address (pBuf).
+ * then read write the memory like 2D. the size is 256x68, application can only use 120x68
+ * pBuf + 256 is the start of next line.
+ * different driver implementation maybe return different unit_size and pitch
+ */
+VAStatus vaCreateBuffer2(
+ VADisplay dpy,
+ VAContextID context,
+ VABufferType type,
+ unsigned int width,
+ unsigned int height,
+ unsigned int *unit_size,
+ unsigned int *pitch,
+ VABufferID *buf_id
+);
+
+/**
* Convey to the server how many valid elements are in the buffer.
* e.g. if multiple slice parameters are being held in a single buffer,
* this will communicate to the server the number of slice parameters
* #VAEncMiscParameterTypeMaxFrameSize.
*/
#define VA_CODED_BUF_STATUS_FRAME_SIZE_OVERFLOW 0x1000
+/**
+ * \brief the bitstream is bad or corrupt.
+ */
+#define VA_CODED_BUF_STATUS_BAD_BITSTREAM 0x8000
#define VA_CODED_BUF_STATUS_AIR_MB_OVER_THRESHOLD 0xff0000
/**
+ * \brief The coded buffer segment status contains frame encoding passes number
+ *
+ * This is the mask to get the number of encoding passes from the coded
+ * buffer segment status.
+ * NUMBER_PASS(bit24~bit27): the number for encoding passes executed for the coded frame.
+ *
+ */
+#define VA_CODED_BUF_STATUS_NUMBER_PASSES_MASK 0xf000000
+
+/**
* \brief The coded buffer segment contains a single NAL unit.
*
* This flag indicates that the coded buffer segment contains a
/**
* \brief Size of the data buffer in this segment (in bytes).
*/
- unsigned int size;
+ uint32_t size;
/** \brief Bit offset into the data buffer where the video data starts. */
- unsigned int bit_offset;
+ uint32_t bit_offset;
/** \brief Status set by the driver. See \c VA_CODED_BUF_STATUS_*. */
- unsigned int status;
+ uint32_t status;
/** \brief Reserved for future use. */
- unsigned int reserved;
+ uint32_t reserved;
/** \brief Pointer to the start of the data buffer. */
void *buf;
/**
* or \c NULL if there is none.
*/
void *next;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VACodedBufferSegment;
/**
uint32_t mem_type;
/** \brief Size of the underlying buffer. */
size_t mem_size;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VABufferInfo;
/**
VAStatus
vaReleaseBufferHandle(VADisplay dpy, VABufferID buf_id);
-/*
-Render (Decode) Pictures
+/** @name vaExportSurfaceHandle() flags
+ *
+ * @{
+ */
+/** Export surface to be read by external API. */
+#define VA_EXPORT_SURFACE_READ_ONLY 0x0001
+/** Export surface to be written by external API. */
+#define VA_EXPORT_SURFACE_WRITE_ONLY 0x0002
+/** Export surface to be both read and written by external API. */
+#define VA_EXPORT_SURFACE_READ_WRITE 0x0003
+/** Export surface with separate layers.
+ *
+ * For example, NV12 surfaces should be exported as two separate
+ * planes for luma and chroma.
+ */
+#define VA_EXPORT_SURFACE_SEPARATE_LAYERS 0x0004
+/** Export surface with composed layers.
+ *
+ * For example, NV12 surfaces should be exported as a single NV12
+ * composed object.
+ */
+#define VA_EXPORT_SURFACE_COMPOSED_LAYERS 0x0008
-A picture represents either a frame or a field.
+/** @} */
-The Begin/Render/End sequence sends the decode buffers to the server
-*/
+/**
+ * \brief Export a handle to a surface for use with an external API
+ *
+ * The exported handles are owned by the caller, and the caller is
+ * responsible for freeing them when no longer needed (e.g. by closing
+ * DRM PRIME file descriptors).
+ *
+ * This does not perform any synchronisation. If the contents of the
+ * surface will be read, vaSyncSurface() must be called before doing so.
+ * If the contents of the surface are written, then all operations must
+ * be completed externally before using the surface again by via VA-API
+ * functions.
+ *
+ * @param[in] dpy VA display.
+ * @param[in] surface_id Surface to export.
+ * @param[in] mem_type Memory type to export to.
+ * @param[in] flags Combination of flags to apply
+ * (VA_EXPORT_SURFACE_*).
+ * @param[out] descriptor Pointer to the descriptor structure to fill
+ * with the handle details. The type of this structure depends on
+ * the value of mem_type.
+ *
+ * @return Status code:
+ * - VA_STATUS_SUCCESS: Success.
+ * - VA_STATUS_ERROR_INVALID_DISPLAY: The display is not valid.
+ * - VA_STATUS_ERROR_UNIMPLEMENTED: The driver does not implement
+ * this interface.
+ * - VA_STATUS_ERROR_INVALID_SURFACE: The surface is not valid, or
+ * the surface is not exportable in the specified way.
+ * - VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE: The driver does not
+ * support exporting surfaces to the specified memory type.
+ */
+VAStatus vaExportSurfaceHandle(VADisplay dpy,
+ VASurfaceID surface_id,
+ uint32_t mem_type, uint32_t flags,
+ void *descriptor);
/**
- * Get ready to decode a picture to a target surface
+ * Render (Video Decode/Encode/Processing) Pictures
+ *
+ * A picture represents either a frame or a field.
+ *
+ * The Begin/Render/End sequence sends the video decode/encode/processing buffers
+ * to the server
+ */
+
+/**
+ * Get ready for a video pipeline
+ * - decode a picture to a target surface
+ * - encode a picture from a target surface
+ * - process a picture to a target surface
*/
VAStatus vaBeginPicture (
VADisplay dpy,
);
/**
- * Send decode buffers to the server.
+ * Send video decode, encode or processing buffers to the server.
*/
VAStatus vaRenderPicture (
VADisplay dpy,
* The server should start processing all pending operations for this
* surface. This call is non-blocking. The client can start another
* Begin/Render/End sequence on a different render target.
+ * if VAContextID used in this function previously successfully passed
+ * vaMFAddContext call, real processing will be started during vaMFSubmit
*/
VAStatus vaEndPicture (
VADisplay dpy,
VAContextID context
);
+/**
+ * Make the end of rendering for a pictures in contexts passed with submission.
+ * The server should start processing all pending operations for contexts.
+ * All contexts passed should be associated through vaMFAddContext
+ * and call sequence Begin/Render/End performed.
+ * This call is non-blocking. The client can start another
+ * Begin/Render/End/vaMFSubmit sequence on a different render targets.
+ * Return values:
+ * VA_STATUS_SUCCESS - operation successful, context was removed.
+ * VA_STATUS_ERROR_INVALID_CONTEXT - mf_context or one of contexts are invalid
+ * due to mf_context not created or one of contexts not assotiated with mf_context
+ * through vaAddContext.
+ * VA_STATUS_ERROR_INVALID_PARAMETER - one of context has not submitted it's frame
+ * through vaBeginPicture vaRenderPicture vaEndPicture call sequence.
+ * dpy: display
+ * mf_context: Multi-Frame context
+ * contexts: list of contexts submitting their tasks for multi-frame operation.
+ * num_contexts: number of passed contexts.
+ */
+VAStatus vaMFSubmit (
+ VADisplay dpy,
+ VAMFContextID mf_context,
+ VAContextID * contexts,
+ int num_contexts
+);
+
/*
Synchronization
*/
typedef struct _VASurfaceDecodeMBErrors
{
- int status; /* 1 if hardware has returned detailed info below, -1 means this record is invalid */
- unsigned int start_mb; /* start mb address with errors */
- unsigned int end_mb; /* end mb address with errors */
+ int32_t status; /* 1 if hardware has returned detailed info below, -1 means this record is invalid */
+ uint32_t start_mb; /* start mb address with errors */
+ uint32_t end_mb; /* end mb address with errors */
VADecodeErrorType decode_error_type;
+ uint32_t num_mb; /* number of mbs with errors */
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW - 1];
} VASurfaceDecodeMBErrors;
/**
* Pre-defined fourcc codes
*/
#define VA_FOURCC_NV12 0x3231564E
+#define VA_FOURCC_NV21 0x3132564E
#define VA_FOURCC_AI44 0x34344149
#define VA_FOURCC_RGBA 0x41424752
#define VA_FOURCC_RGBX 0x58424752
#define VA_FOURCC_NV11 0x3131564e
#define VA_FOURCC_YV12 0x32315659
#define VA_FOURCC_P208 0x38303250
+/* IYUV same as I420, but most user perfer I420, will deprecate it */
#define VA_FOURCC_IYUV 0x56555949
+#define VA_FOURCC_I420 0x30323449
#define VA_FOURCC_YV24 0x34325659
#define VA_FOURCC_YV32 0x32335659
#define VA_FOURCC_Y800 0x30303859
#define VA_FOURCC_RGBP 0x50424752
#define VA_FOURCC_BGRP 0x50524742
#define VA_FOURCC_411R 0x52313134 /* rotated 411P */
+#define VA_FOURCC_RGB565 0x36314752 /* VA_FOURCC('R','G','1','6') */
+#define VA_FOURCC_BGR565 0x36314742 /* VA_FOURCC('B','G','1','6') */
+
+#define VA_FOURCC_Y210 0x30313259
+#define VA_FOURCC_Y216 0x36313259
+#define VA_FOURCC_Y410 0x30313459
+#define VA_FOURCC_Y416 0x36313459
+
/**
* Planar YUV 4:2:2.
* 8-bit Y plane, followed by 8-bit 2x1 subsampled V and U planes
typedef struct _VAImageFormat
{
- unsigned int fourcc;
- unsigned int byte_order; /* VA_LSB_FIRST, VA_MSB_FIRST */
- unsigned int bits_per_pixel;
+ uint32_t fourcc;
+ uint32_t byte_order; /* VA_LSB_FIRST, VA_MSB_FIRST */
+ uint32_t bits_per_pixel;
/* for RGB formats */
- unsigned int depth; /* significant bits per pixel */
- unsigned int red_mask;
- unsigned int green_mask;
- unsigned int blue_mask;
- unsigned int alpha_mask;
+ uint32_t depth; /* significant bits per pixel */
+ uint32_t red_mask;
+ uint32_t green_mask;
+ uint32_t blue_mask;
+ uint32_t alpha_mask;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAImageFormat;
typedef VAGenericID VAImageID;
* size and format. This buffer is managed by the library implementation, and
* accessed by the client through the buffer Map/Unmap functions.
*/
- unsigned short width;
- unsigned short height;
- unsigned int data_size;
- unsigned int num_planes; /* can not be greater than 3 */
+ uint16_t width;
+ uint16_t height;
+ uint32_t data_size;
+ uint32_t num_planes; /* can not be greater than 3 */
/*
* An array indicating the scanline pitch in bytes for each plane.
* Each plane may have a different pitch. Maximum 3 planes for planar formats
*/
- unsigned int pitches[3];
+ uint32_t pitches[3];
/*
* An array indicating the byte offset from the beginning of the image data
* to the start of each plane.
*/
- unsigned int offsets[3];
+ uint32_t offsets[3];
/* The following fields are only needed for paletted formats */
- int num_palette_entries; /* set to zero for non-palette images */
+ int32_t num_palette_entries; /* set to zero for non-palette images */
/*
* Each component is one byte and entry_bytes indicates the number of components in
* each entry (eg. 3 for YUV palette entries). set to zero for non-palette images
*/
- int entry_bytes;
+ int32_t entry_bytes;
/*
* An array of ascii characters describing the order of the components within the bytes.
* Only entry_bytes characters of the string are used.
*/
- char component_order[4];
+ int8_t component_order[4];
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAImage;
/** Get maximum number of image formats supported by the implementation */
VASubpictureID subpicture,
VASurfaceID *target_surfaces,
int num_surfaces,
- short src_x, /* upper left offset in subpicture */
- short src_y,
- unsigned short src_width,
- unsigned short src_height,
- short dest_x, /* upper left offset in surface */
- short dest_y,
- unsigned short dest_width,
- unsigned short dest_height,
+ int16_t src_x, /* upper left offset in subpicture */
+ int16_t src_y,
+ uint16_t src_width,
+ uint16_t src_height,
+ int16_t dest_x, /* upper left offset in surface */
+ int16_t dest_y,
+ uint16_t dest_width,
+ uint16_t dest_height,
/*
* whether to enable chroma-keying, global-alpha, or screen relative mode
* see VA_SUBPICTURE_XXX values
*/
- unsigned int flags
+ uint32_t flags
);
/**
#define VA_ROTATION_90 0x00000001
#define VA_ROTATION_180 0x00000002
#define VA_ROTATION_270 0x00000003
+/**@}*/
+
+/**
+ * @name Mirroring directions
+ *
+ * Those values could be used for VADisplayAttribMirror attribute or
+ * VAProcPipelineParameterBuffer::mirror_state.
+
+ */
+/**@{*/
+/** \brief No Mirroring. */
+#define VA_MIRROR_NONE 0x00000000
+/** \brief Horizontal Mirroring. */
+#define VA_MIRROR_HORIZONTAL 0x00000001
+/** \brief Vertical Mirroring. */
+#define VA_MIRROR_VERTICAL 0x00000002
+/**@}*/
/** attribute value for VADisplayAttribOutOfLoopDeblock */
#define VA_OOL_DEBLOCKING_FALSE 0x00000000
typedef struct _VADisplayAttribute
{
VADisplayAttribType type;
- int min_value;
- int max_value;
- int value; /* used by the set/get attribute functions */
+ int32_t min_value;
+ int32_t max_value;
+ int32_t value; /* used by the set/get attribute functions */
/* flags can be VA_DISPLAY_ATTRIB_GETTABLE or VA_DISPLAY_ATTRIB_SETTABLE or OR'd together */
- unsigned int flags;
+ uint32_t flags;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VADisplayAttribute;
/** Get maximum number of display attributs supported by the implementation */
int32_t pic_order_cnt;
/* described below */
uint32_t flags;
+
+ /** \brief Reserved bytes for future use, must be zero */
+ uint32_t va_reserved[VA_PADDING_LOW];
} VAPictureHEVC;
/* flags in VAPictureHEVC could be OR of the following */
#include <va/va_dec_vp8.h>
#include <va/va_dec_vp9.h>
#include <va/va_enc_hevc.h>
+#include <va/va_fei_hevc.h>
#include <va/va_enc_h264.h>
#include <va/va_enc_jpeg.h>
#include <va/va_enc_mpeg2.h>
OSDN Git Service
