OSDN Git Service

HEVC FEI support
authorKelvin Hu <kelvin.hu@intel.com>
Fri, 4 Aug 2017 03:30:49 +0000 (11:30 +0800)
committerXiang, Haihao <haihao.xiang@intel.com>
Wed, 22 Nov 2017 10:52:44 +0000 (02:52 -0800)
 HEVC FEI support, new HEVC FEI buffer in va.h and add va_fei_hevc.h

Signed-off-by: Kelvin Hu <kelvin.hu@intel.com>
va/Makefile.am
va/va.h
va/va_fei_hevc.h [new file with mode: 0644]
va/va_str.c

index 4e94172..1f63bc9 100644 (file)
@@ -55,6 +55,7 @@ libva_source_h = \
        va_fei.h                \
        va_fei_h264.h           \
        va_enc_mpeg2.h          \
+       va_fei_hevc.h           \
        va_enc_vp9.h            \
        va_str.h                \
        va_tpi.h                \
diff --git a/va/va.h b/va/va.h
index aa18ea0..c6d435a 100644 (file)
--- a/va/va.h
+++ b/va/va.h
@@ -1589,6 +1589,16 @@ typedef enum
      *surface, it will override the "skipCheckDisable" setting in VAEncMiscParameterEncQuality.
      */
     VAEncMacroblockDisableSkipMapBufferType = 53,
+    /**
+     * \brief HEVC FEI CTB level cmd buffer
+     * it is CTB level information for future usage.
+     */
+    VAEncFEICTBCmdBufferType            = 54,
+    /**
+     * \brief HEVC FEI CU level data buffer
+     * it's CTB level information for future usage
+     */
+    VAEncFEICURecordBufferType          = 55,
     /** decode stream out buffer, intermedia data of decode, it may include MV, MB mode etc.
       * it can be used to detect motion and analyze the frame contain  */
     VADecodeStreamoutBufferType             = 56,
@@ -4075,6 +4085,7 @@ typedef struct _VAPictureHEVC
 #include <va/va_dec_vp8.h>
 #include <va/va_dec_vp9.h>
 #include <va/va_enc_hevc.h>
+#include <va/va_fei_hevc.h>
 #include <va/va_enc_h264.h>
 #include <va/va_enc_jpeg.h>
 #include <va/va_enc_mpeg2.h>
diff --git a/va/va_fei_hevc.h b/va/va_fei_hevc.h
new file mode 100644 (file)
index 0000000..51bd055
--- /dev/null
@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2007-2017 Intel Corporation. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * \file va_fei_hevc.h
+ * \brief The FEI encoding HEVC special API
+ */
+
+
+#ifndef  __VA_FEI_HEVC_H__
+#define  __VA_FEI_HEVC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "va_fei.h"
+
+/** \brief FEI frame level control buffer for HEVC */
+typedef struct _VAEncMiscParameterFEIFrameControlHEVC
+{
+    /* one of the VAConfigAttribFEIFunctionType values */
+    uint32_t      function; 
+    /** \brief CTB control input buffer. It is valid only when per_ctb_input
+     * is set to 1. The data in this buffer correspond to the input source. CTB is in raster scan order,
+     * each CTB control data structure is defined by VAEncFEICTBControlHEVC.
+     * Buffer size shall not be less than the number of CTBs multiplied by
+     * sizeof(VAEncFEICTBControlHEVC).
+     */
+    VABufferID    ctb_ctrl;
+    /** \brief CTB cmd per CTB data output of ENC
+     *  it is reserved for CTB level information
+     * it should include CU split information and other CTB datas .
+     * Each CTB block has one CTB cmd data.
+     */
+    VABufferID    ctb_cmd;
+    /** \brief CU record data output of ENC
+     *  it is reserved for CU level information
+     * it should include CU detail data. include mode,MV, reference etc.
+     * Each CTB block has one CU record data.
+     */
+    VABufferID    cu_record;
+    /** \brief distortion output of ENC or ENC_PAK.
+     * Each CTB has one distortion data with VAEncFEIDistortionHevc
+     * Buffer size shall not be less than the number of CTBs multiplied by
+     * sizeof(VAEncFEIDistortionHevc).
+     */
+    VABufferID    distortion;
+    /** \brief Qp input buffer. It is valid only when per_block_qp is set to 1.
+     * The data in this buffer correspond to the input source.
+     * One Qp per block block is in raster scan order, each Qp is a signed char (8-bit) value.
+     **/
+    VABufferID    qp;
+    /** \brief MV predictor. It is valid only when mv_predictor_input is set to non-zero.
+     * Each CTB block has one or more pair of motion vectors and the corresponding
+     * reference indexes as defined by VAEncFEIMVPredictorHEVC. 32x32 block is in raster scan order.
+     * Buffer size shall not be less than the number of 16x16 blocks multiplied by
+     * sizeof(VAEncFEIMVPredictorHEVC). */
+    VABufferID    mv_predictor;
+
+    /** \brief number of MV predictors L0 and L1. the maximum number of motion vector predictor for a 16x16, 32x32 or
+     * 64x64 block is four, it must not be greater than maximum supported MV predictor,
+     **/
+    uint32_t      num_mv_predictors_l0      : 16;
+    uint32_t      num_mv_predictors_l1      : 16;
+
+    /** \brief control parameters */
+    uint32_t      search_path               : 8;
+    uint32_t      len_sp                    : 8;
+    uint32_t      reserved0                    : 16;
+
+    /** \brief multi pred l0/1
+     * 0000: no internal MV predictor will be used
+     * 0001: spatial MV predictors
+     * 0100/1000: Reserved
+     **/
+    uint32_t      multi_pred_l0             : 4;
+    uint32_t      multi_pred_l1             : 4;
+    /** \brief defines the motion vector precision, like integer/half/quarter pel.
+     *  00b: integer pel
+     *  01b: half-pel
+     *  10b: reserved
+     *  11b: quarter-pel
+    */
+    uint32_t      sub_pel_mode              : 2;
+    uint32_t      adaptive_search           : 1;
+    /** \brief mv_predictor_input
+     * 000: MV predictor disabled
+     * 001: MV predictor enabled per 16x16 block
+     * 010: MV predictor enabled per 32x32 block
+     * 011: MV predictor enabled per 64x64 block
+     * 111: MV predictor enabled, block size can vary and is determined by BlockSize in motion vector predictor buffer
+     * 100/101/110: Reserved
+     **/
+    uint32_t      mv_predictor_input        : 3;
+    /** \brief enables per CTB or CU qp */
+    uint32_t      per_block_qp              : 1;
+    /** \brief enables the per CTB input , if 1, need ctb_ctrl to be a real surface ID*/
+    uint32_t      per_ctb_input             : 1;
+    /** when this flag is set, extra distortion between current CTB and co-located CTB is provided. 
+     * Extra distortion output has performance impact, set it only when it is needed */
+    uint32_t      colocated_ctb_distortion  : 1;
+    /** brief specifies whether this CTB should be forced to split to remove Inter big LCU: do not check Inter 32x32
+     * PUs. Every 32x32 LCU is split at least once. It can be used to improved performance.
+     * 0: ENC determined block type
+     * 1: Force to split
+     **/
+    uint32_t      force_lcu_split           : 1;
+    /** \brief enables CU64x64 check */
+    uint32_t      enable_cu64_check         : 1;
+    /** \brief enables CU64x64 asymmetric motion partition check */
+    uint32_t      enable_cu64_amp_check     : 1;
+    /** \brief specifies if check the 64x64 merge candidate
+     * 0: after skip check, 
+     * 1: only skip check for 64x64 
+     Default: 0. This field is used by LCU64 bi-directional.
+     **/
+    uint32_t      cu64_skip_check_only      : 1;
+    uint32_t      reserved1                : 11;
+    /** specifies the search region width in pixels.
+     *  When bidirectional search is enabled, this applies to both search regions */
+    uint32_t      ref_width                 : 8;
+    /** specifies the reference region height in pixels. When bidirectional search is enabled, 
+     * this applies to both search regions. */
+    uint32_t      ref_height                : 8;
+    /** \brief search window similar for AVC 
+     *  defines predefined search windows. If it is selected, RefWidth, RefHeight, LenSP and SearchPath are ignored.
+     *  0 : not use predefined search window
+     *  1 : Tiny – (4 SUs) 24x24 window diamond search
+     *  2 : Small – (9 SUs) 28x28 window diamond search
+     *  3 : Diamond – (16 SUs) 48x40 window diamond search
+     *  4 : Large Diamond – (32 SUs) 48x40 window diamond search
+     *  5 : Exhaustive – 48x40 window full search
+     *  6 : (64 SUs) 64x64 window full search
+     *  Note: option 1, 2, 3 and 4 are valid only when CAP parameter SearchWindow64Support is 0.
+     *  And option 6 is valid only when SearchWindow64Support is 1.*/
+    uint32_t      search_window             : 8;
+    /** \brief number of internal MV predictors for IME searches */
+    uint32_t      max_num_ime_search_center : 3;
+    uint32_t      reserved2                 : 5;
+
+    /** \brief specifies number of splits that encoder could be run concurrently
+     * 1: level 1, default value
+     * 2: level 2
+     * 4: level 3
+     **/
+    uint32_t      num_concurrent_enc_frame_partition : 8;
+    uint32_t      reserved3                 : 24;
+
+    /** \brief max frame size control with multi passes QP setting */
+    uint32_t      max_frame_size;
+    /** \brief number of passes, every pass has different QP */
+    uint32_t      num_passes;
+    /** \brief delta QP list for every pass */
+    uint8_t       *delta_qp;
+
+    uint32_t      reserved4[2];
+} VAEncMiscParameterFEIFrameControlHEVC;
+
+/** \brief Application can use this definition as reference to allocate the buffer
+ * based on MaxNumPredictor returned from attribute VAConfigAttribFEIMVPredictors query.
+ * this buffer allocation is always based on 16x16 block even block size is indicated as 32x32 or 64x64, and buffer
+ * layout is always in 32x32 block raster scan order even block size is 16x16 or 64x64. If 32x32 block size is set,
+ * only the data in the first 16x16 block (block 0) is used for 32x32 block. If 64x64 block size is set 
+ * MV layout is still in 32x32 raster scan order, the same as 32x32 and the first 16x16
+ * block within each 32x32 block needs to have intended MV data (four 32x32 blocks will have the same MV data in the
+ * correspondent first 16x16 block). Data structure for each 16x16 block is defined as below (same as AVC except
+ * BlockSize/Reserved bits).
+ **/
+typedef struct _VAEncFEIMVPredictorHEVC
+{
+    /** \brief Feference index corresponding to the entry of RefPicList0 & RefPicList1 in slice header (final reference
+     * list). Note that RefPicList0 & RefPicList1 needs to be the same for all slices.
+     * Ref0xIndex – RefPicList0; Ref1xIndex – RefPicList1; x – 0 ~ MaxNumPredictor */
+    struct {
+        uint8_t   ref_idx_l0    : 4;
+        uint8_t   ref_idx_l1    : 4;
+    } ref_idx[4]; /* index is predictor number */
+    /** \brief Valid only when MVPredictor is set to 011 for HEVC. Only valid in the first 16x16 block.
+     * 00: MV predictor disabled for this 32x32 block
+     * 01: MV predictor enabled per 16x16 block for this 32x32 block
+     * 10: MV predictor enabled per 32x32 block, the rest of 16x16 block data within this 32x32 block are ignored
+     * 11: Reserved */
+    uint32_t block_size         : 2;
+    uint32_t reserved           : 30;
+
+    VAMotionVector mv[4]; /* MaxNumPredictor is 4 */
+} VAEncFEIMVPredictorHEVC;    //40 bytes
+
+/** \brief FEI CTB level control data structure */
+typedef struct _VAEncFEICTBControlHEVC
+{
+    // DWORD 0
+    uint32_t    force_to_intra      : 1;
+    uint32_t    force_to_inter      : 1;
+    uint32_t    force_to_skip       : 1;
+    /** \brief force all coeff to zero */
+    uint32_t    force_to_zero_coeff : 1;
+    uint32_t    reserved0           : 28;
+    // DWORD 1
+    uint32_t    reserved1;
+    // DWORD 2
+    uint32_t    reserved2;
+    // DWORD 3
+    uint32_t    reserved3;
+} VAEncFEICTBControlHEVC;
+
+/** \brief VAEncFEIDistortionHevc defines the data structure for VAEncFEIDistortionBufferType per CTB block.
+ * It is output buffer of ENC and ENC_PAK modes, The CTB block is in raster scan order.
+ * Buffer size shall not be less than the number of CTB blocks multiple by sizeof(VAEncFEIDistortionHevc).
+ **/
+typedef struct _VAEncFEIDistortionHevc
+{
+    /** best CTB distortion */
+    uint32_t    best_distortion;
+    /** only when colocated_ctb_distortion in VAEncMiscParameterFEIFrameControlHEVC is set */
+    uint32_t    colocated_ctb_distortion;
+} VAEncFEIDistortionHevc;  
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
index 2177872..55f4136 100644 (file)
@@ -160,6 +160,8 @@ const char *vaBufferTypeStr(VABufferType bufferType)
     TOSTR(VAStatsStatisticsBottomFieldBufferType);
     TOSTR(VAStatsMVBufferType);
     TOSTR(VAStatsMVPredictorBufferType);
+    TOSTR(VAEncFEICTBCmdBufferType);
+    TOSTR(VAEncFEICURecordBufferType);
     case VABufferTypeMax: break;
     }
     return "<unknown buffer type>";