/*
- * Copyright (C) 2014 Intel Corporation.
+ * Copyright (C) 2014-2015 Intel Corporation.
*/
#ifndef __COMMON_H__
#define __COMMON_H__
-#define MAX_DEVICES 8 /* Check iio devices 0 to MAX_DEVICES-1 */
-#define MAX_SENSORS 10 /* We can handle as many sensors */
+#define MAX_DEVICES 9 /* Check iio devices 0 to MAX_DEVICES-1 */
+#define MAX_SENSORS 12 /* We can handle as many sensors */
#define MAX_CHANNELS 4 /* We can handle as many channels per sensor */
+#define MAX_EVENTS 2 /* We can handle as many events per channel */
#define MAX_TRIGGERS 8 /* Check for triggers 0 to MAX_TRIGGERS-1 */
#define DEV_FILE_PATH "/dev/iio:device%d"
#define ENABLE_PATH BASE_PATH "buffer/enable"
#define NAME_PATH BASE_PATH "name"
#define TRIGGER_PATH BASE_PATH "trigger/current_trigger"
+#define EVENTS_PATH BASE_PATH "events/"
+#define SENSOR_ENABLE_PATH BASE_PATH "in_%s_en"
#define SENSOR_OFFSET_PATH BASE_PATH "in_%s_offset"
#define SENSOR_SCALE_PATH BASE_PATH "in_%s_scale"
#define SENSOR_SAMPLING_PATH BASE_PATH "in_%s_sampling_frequency"
#define DEVICE_SAMPLING_PATH BASE_PATH "sampling_frequency"
#define DEVICE_AVAIL_FREQ_PATH BASE_PATH "sampling_frequency_available"
#define ILLUMINATION_CALIBPATH BASE_PATH "in_illuminance_calibscale"
+#define SENSOR_CALIB_BIAS_PATH BASE_PATH "in_%s_calibbias"
#define PROP_BASE "ro.iio.%s.%s" /* Note: PROPERTY_KEY_MAX is small */
#define ARRAY_SIZE(x) sizeof(x)/sizeof(x[0])
#define REPORTING_MODE(x) ((x) & 0x06)
-#ifdef __LP64__
- typedef uint64_t flag_t;
- typedef int64_t max_delay_t;
-#else
- typedef uint32_t flag_t;
- typedef int32_t max_delay_t;
-#endif
+#define FILTER_TYPE_NONE 0
+#define FILTER_TYPE_MOVING_AVERAGE 1
+#define FILTER_TYPE_MEDIAN 2
+
+#define MODE_AUTO 0 /* autodetect */
+#define MODE_POLL 1
+#define MODE_TRIGGER 2
+#define MODE_EVENT 3
+
+
+/* Couple of temporary defines until we get a suitable linux/iio/events.h include */
+
+struct iio_event_data {
+ __u64 id;
+ __s64 timestamp;
+};
+
+#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int)
+
+#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF)
+#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF)
+#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF)
+#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF)
+
+/* Couple of temporary defines until we get a suitable linux/iio/types.h include */
+enum iio_chan_type {
+ IIO_VOLTAGE,
+ IIO_CURRENT,
+ IIO_POWER,
+ IIO_ACCEL,
+ IIO_ANGL_VEL,
+ IIO_MAGN,
+ IIO_LIGHT,
+ IIO_INTENSITY,
+ IIO_PROXIMITY,
+ IIO_TEMP,
+ IIO_INCLI,
+ IIO_ROT,
+ IIO_ANGL,
+ IIO_TIMESTAMP,
+ IIO_CAPACITANCE,
+ IIO_ALTVOLTAGE,
+ IIO_CCT,
+ IIO_PRESSURE,
+ IIO_HUMIDITYRELATIVE,
+ IIO_ACTIVITY,
+ IIO_STEPS,
+ IIO_CALORIES,
+ IIO_DISTANCE,
+ IIO_SPEED,
+};
+
+enum iio_modifier {
+ IIO_NO_MOD,
+ IIO_MOD_X,
+ IIO_MOD_Y,
+ IIO_MOD_Z,
+ IIO_MOD_X_AND_Y,
+ IIO_MOD_X_AND_Z,
+ IIO_MOD_Y_AND_Z,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_MOD_X_OR_Y,
+ IIO_MOD_X_OR_Z,
+ IIO_MOD_Y_OR_Z,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_MOD_LIGHT_BOTH,
+ IIO_MOD_LIGHT_IR,
+ IIO_MOD_ROOT_SUM_SQUARED_X_Y,
+ IIO_MOD_SUM_SQUARED_X_Y_Z,
+ IIO_MOD_LIGHT_CLEAR,
+ IIO_MOD_LIGHT_RED,
+ IIO_MOD_LIGHT_GREEN,
+ IIO_MOD_LIGHT_BLUE,
+ IIO_MOD_QUATERNION,
+ IIO_MOD_TEMP_AMBIENT,
+ IIO_MOD_TEMP_OBJECT,
+ IIO_MOD_NORTH_MAGN,
+ IIO_MOD_NORTH_TRUE,
+ IIO_MOD_NORTH_MAGN_TILT_COMP,
+ IIO_MOD_NORTH_TRUE_TILT_COMP,
+ IIO_MOD_RUNNING,
+ IIO_MOD_JOGGING,
+ IIO_MOD_WALKING,
+ IIO_MOD_STILL,
+};
+
+enum iio_event_type {
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_TYPE_ROC,
+ IIO_EV_TYPE_THRESH_ADAPTIVE,
+ IIO_EV_TYPE_MAG_ADAPTIVE,
+ IIO_EV_TYPE_INSTANCE,
+};
+
+enum iio_event_info {
+ IIO_EV_INFO_ENABLE,
+ IIO_EV_INFO_VALUE,
+ IIO_EV_INFO_HYSTERESIS,
+ IIO_EV_INFO_PERIOD,
+};
+
+enum iio_event_direction {
+ IIO_EV_DIR_EITHER,
+ IIO_EV_DIR_RISING,
+ IIO_EV_DIR_FALLING,
+ IIO_EV_DIR_NONE,
+};
+
+
+typedef struct
+{
+ const char *type; /* event type; e.g: transition */
+ const char *dir; /* event direction; e.g: rising */
+
+ /* sysfs entries located in /sys/bus/iio/devices/iio:deviceX/events/ */
+ const char *ev_en_path;
+ const char *ev_value_path;
+}
+event_descriptor_t;
typedef struct
const char *raw_path; /* _raw sysfs file name */
const char *input_path; /* _input sysfs file name */
const char *scale_path; /* _scale sysfs file name */
+
+ const int num_events;
+ event_descriptor_t event[MAX_EVENTS];
}
channel_descriptor_t;
{
int offset; /* Offset in bytes within the iio character device report */
int size; /* Field size in bytes */
- float scale; /* scale for each channel */
+ float scale; /* Scale for each channel */
char type_spec[MAX_TYPE_SPEC_LEN]; /* From driver; ex: le:u10/16>>0 */
datum_info_t type_info; /* Decoded contents of type spec */
float opt_scale; /*
* Optional correction scale read from a property such as iio.accel.x.scale, allowing late compensation of
* problems such as misconfigured axes ; set to 1 by default. Applied at the end of the scaling process.
*/
+ int raw_path_present; /* Flag signalling the presence of in_<sens>_<axis>_raw file */
+ int input_path_present; /* Flag signalling the presence of in_<sens>_input file */
}
channel_info_t;
float requested_rate; /* requested events / second */
float sampling_rate; /* setup events / second */
+ float min_supported_rate;
+ float max_supported_rate;
+
int dev_num; /* Associated iio dev num, ex: 3 for /dev/iio:device3 */
int catalog_index; /* Associated entry within the sensor_catalog array */
int num_channels; /* Actual channel count ; 0 for poll mode sensors */
+ int mode; /* Usage mode, ex: poll, trigger ... */
+
/*
* The array below indicates where to gather report data for this sensor inside the reports that we read from the iio character device.
* It is updated whenever channels are enabled or disabled on the same device. Channel size indicates the size in bytes of fields, and
void *cal_data; /* Sensor calibration data, e.g. for magnetometer */
- /* Filtering data for noisy sensors */
- void* filter;
-
- float prev_val; /* Previously reported value, for on-change sensors */
+ void* filter; /* Filtering data for noisy sensors */
+ int filter_type;/* FILTER_ specification for this sensor ; default is FILTER_NONE */
+ /* Previously reported value, for on-change sensors */
+ union {
+ float data;
+ uint64_t data64;
+ } prev_val;
/*
* Certain sensors expose their readings through sysfs files that have a long response time (100-200 ms for ALS). Rather than block our
* global control loop for several hundred ms each second, offload those lengthy blocking reads to dedicated threads, which will then report
*/
unsigned char order[MAX_CHANNELS];
- /* A few variables used for data filtering */
- float *history; /* Working buffer containing recorded samples */
- float *history_sum; /* The current sum of the history elements */
- int history_size; /* Number of recorded samples */
- int history_entries; /* How many of these are initialized */
- int history_index; /* Index of sample to evict next time */
-
/*
* Event counter - will be used to check if we have a significant sample for noisy sensors. We want to make sure we do not send any wrong
* events before filtering kicks in. We can also use it for statistics.
*/
uint64_t event_count;
+
+ /* Some polled sensors need to be first enabled so that they start
+ * computing a set of values in hardware (e.g step counter). Enabling
+ * is done through a sysfs attribute in_<tag>_en
+ */
+ int needs_enable;
+
+ float semi_arbitrated_rate; /* Arbitrated sampling rate before we considered other sensors co-located on the same iio device */
}
sensor_info_t;
extern struct sensor_t sensor_desc[MAX_SENSORS];
extern sensor_info_t sensor[MAX_SENSORS];
extern sensor_catalog_entry_t sensor_catalog[];
+extern unsigned int catalog_size;
+
+/* Needed both in sensors and activity HALs */
+void check_trig_sensors (int i, char *sysfs_file, char map[catalog_size]);
+void check_poll_sensors (int i, char *sysfs_file, char map[catalog_size]);
+void check_event_sensors (int i, char *sysfs_file, char map[catalog_size]);
+void discover_sensors(int dev_num, char *sysfs_base_path, char map[catalog_size],
+ void (*discover_sensor)(int, char*, char*));
+
+/*
+ * Macros associating iio sysfs entries to to sensor types ; see
+ * linux/kernel/drivers/iio/industrialio-core.c and
+ * hardware/libhardware/include/hardware/sensor.h
+ */
+
+#define DECLARE_VOID_CHANNEL(tag) \
+ tag, \
+ "", \
+ "", \
+ "", \
+ "", \
+ "", \
+ "", \
+
+#define DECLARE_CHANNEL(tag, spacer, name) \
+ name, \
+ "in_"tag spacer name"_en", \
+ "in_"tag spacer name"_type", \
+ "in_"tag spacer name"_index", \
+ "in_"tag spacer name"_raw", \
+ "in_"tag spacer name"_input", \
+ "in_"tag spacer name"_scale", \
+ 0, {{0}},
+
+#define DECLARE_NAMED_CHANNEL(tag, name) DECLARE_CHANNEL(tag, "_", name)
+
+#define DECLARE_GENERIC_CHANNEL(tag) DECLARE_CHANNEL(tag, "", "")
+
+#define DECLARE_EVENT(tag, spacer1, name, spacer2, type, spacer3, dir) \
+ type, dir, \
+ "in_"tag spacer1 name spacer2 type spacer3 dir"_en", \
+ "in_"tag spacer1 name spacer2 type spacer3 dir"_value", \
+
+#define DECLARE_GENERIC_EVENT(tag, name, type, dir) \
+ DECLARE_EVENT(tag, "_", name, "_", type, "_", dir)
+#define DECLARE_NAMED_EVENT(tag, name) \
+ DECLARE_EVENT(tag, "_", name, "","","","")
#endif