#define SIM_COUNT 1
#endif
-#define RIL_VERSION 10 /* Current version */
+/*
+ * RIL version.
+ * Value of RIL_VERSION should not be changed in future. Here onwards,
+ * when a new change is supposed to be introduced which could involve new
+ * schemes added like Wakelocks, data structures added/updated, etc, we would
+ * just document RIL version associated with that change below. When OEM updates its
+ * RIL with those changes, they would return that new RIL version during RIL_REGISTER.
+ * We should make use of the returned version by vendor to identify appropriate scheme
+ * or data structure version to use.
+ *
+ * Documentation of RIL version and associated changes
+ * RIL_VERSION = 11 : This version corresponds to updated data structures namely
+ * RIL_Data_Call_Response_v11, RIL_SIM_IO_v6, RIL_CardStatus_v6,
+ * RIL_SimRefreshResponse_v7, RIL_CDMA_CallWaiting_v6,
+ * RIL_LTE_SignalStrength_v8 & RIL_SignalStrength_v10.
+ *
+ * RIL_VERSION = 12 : This version includes new wakelock semantics.
+ */
+#define RIL_VERSION 11
+#define LAST_IMPRECISE_RIL_VERSION 11 // Better self-documented name
#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
#define MAX_CLIENT_ID_LENGTH 2
#define MAX_DEBUG_SOCKET_NAME_LENGTH 12
#define MAX_QEMU_PIPE_NAME_LENGTH 11
+#define MAX_UUID_LENGTH 64
+
typedef void * RIL_Token;
RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to
illegal SIM or ME */
RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */
- RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */
+ RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */
+ RIL_E_DIAL_MODIFIED_TO_USSD = 18, /* DIAL request modified to USSD */
+ RIL_E_DIAL_MODIFIED_TO_SS = 19, /* DIAL request modified to SS */
+ RIL_E_DIAL_MODIFIED_TO_DIAL = 20, /* DIAL request modified to DIAL with different
+ data */
+ RIL_E_USSD_MODIFIED_TO_DIAL = 21, /* USSD request modified to DIAL */
+ RIL_E_USSD_MODIFIED_TO_SS = 22, /* USSD request modified to SS */
+ RIL_E_USSD_MODIFIED_TO_USSD = 23, /* USSD request modified to different USSD
+ request */
+ RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */
+ RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */
+ RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */
+ RIL_E_SS_MODIFIED_TO_SS = 27, /* SS request modified to different SS request */
+ RIL_E_LCE_NOT_SUPPORTED = 36 /* LCE service not supported(36 in RILConstants.java) */
+
+
} RIL_Errno;
typedef enum {
RADIO_TECH_LTE = 14,
RADIO_TECH_HSPAP = 15, // HSPA+
RADIO_TECH_GSM = 16, // Only supports voice
- RADIO_TECH_TD_SCDMA = 17
+ RADIO_TECH_TD_SCDMA = 17,
+ RADIO_TECH_IWLAN = 18
} RIL_RadioTechnology;
+typedef enum {
+ RAF_UNKNOWN = (1 << RADIO_TECH_UNKNOWN),
+ RAF_GPRS = (1 << RADIO_TECH_GPRS),
+ RAF_EDGE = (1 << RADIO_TECH_EDGE),
+ RAF_UMTS = (1 << RADIO_TECH_UMTS),
+ RAF_IS95A = (1 << RADIO_TECH_IS95A),
+ RAF_IS95B = (1 << RADIO_TECH_IS95B),
+ RAF_1xRTT = (1 << RADIO_TECH_1xRTT),
+ RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0),
+ RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A),
+ RAF_HSDPA = (1 << RADIO_TECH_HSDPA),
+ RAF_HSUPA = (1 << RADIO_TECH_HSUPA),
+ RAF_HSPA = (1 << RADIO_TECH_HSPA),
+ RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B),
+ RAF_EHRPD = (1 << RADIO_TECH_EHRPD),
+ RAF_LTE = (1 << RADIO_TECH_LTE),
+ RAF_HSPAP = (1 << RADIO_TECH_HSPAP),
+ RAF_GSM = (1 << RADIO_TECH_GSM),
+ RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA),
+} RIL_RadioAccessFamily;
+
+typedef enum {
+ RC_PHASE_CONFIGURED = 0, // LM is configured is initial value and value after FINISH completes
+ RC_PHASE_START = 1, // START is sent before Apply and indicates that an APPLY will be
+ // forthcoming with these same parameters
+ RC_PHASE_APPLY = 2, // APPLY is sent after all LM's receive START and returned
+ // RIL_RadioCapability.status = 0, if any START's fail no
+ // APPLY will be sent
+ RC_PHASE_UNSOL_RSP = 3, // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY
+ RC_PHASE_FINISH = 4 // FINISH is sent after all commands have completed. If an error
+ // occurs in any previous command the RIL_RadioAccessesFamily and
+ // logicalModemUuid fields will be the prior configuration thus
+ // restoring the configuration to the previous value. An error
+ // returned by this command will generally be ignored or may
+ // cause that logical modem to be removed from service.
+} RadioCapabilityPhase;
+
+typedef enum {
+ RC_STATUS_NONE = 0, // This parameter has no meaning with RC_PHASE_START,
+ // RC_PHASE_APPLY
+ RC_STATUS_SUCCESS = 1, // Tell modem the action transaction of set radio
+ // capability was success with RC_PHASE_FINISH
+ RC_STATUS_FAIL = 2, // Tell modem the action transaction of set radio
+ // capability is fail with RC_PHASE_FINISH.
+} RadioCapabilityStatus;
+
+#define RIL_RADIO_CAPABILITY_VERSION 1
+typedef struct {
+ int version; // Version of structure, RIL_RADIO_CAPABILITY_VERSION
+ int session; // Unique session value defined by framework returned in all "responses/unsol"
+ int phase; // CONFIGURED, START, APPLY, FINISH
+ int rat; // RIL_RadioAccessFamily for the radio
+ char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem.
+ int status; // Return status and an input parameter for RC_PHASE_FINISH
+} RIL_RadioCapability;
+
// Do we want to split Data from Voice and the use
// RIL_RadioTechnology for get/setPreferredVoice/Data ?
typedef enum {
to point connections. */
char * pcscf; /* the Proxy Call State Control Function address
via PCO(Protocol Configuration Option) for IMS client. */
-} RIL_Data_Call_Response_v9; // FIXME: Change to v10
+} RIL_Data_Call_Response_v9;
+
+typedef struct {
+ int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+ int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+ back-off timer value RIL wants to override the one
+ pre-configured in FW.
+ The unit is miliseconds.
+ The value < 0 means no value is suggested.
+ The value 0 means retry should be done ASAP.
+ The value of INT_MAX(0x7fffffff) means no retry. */
+ int cid; /* Context ID, uniquely identifies this call */
+ int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+ char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
+ For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+ PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+ such as "IP" or "IPV6" */
+ char * ifname; /* The network interface name */
+ char * addresses; /* A space-delimited list of addresses with optional "/" prefix length,
+ e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+ May not be empty, typically 1 IPv4 or 1 IPv6 or
+ one of each. If the prefix length is absent the addresses
+ are assumed to be point to point with IPv4 having a prefix
+ length of 32 and IPv6 128. */
+ char * dnses; /* A space-delimited list of DNS server addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty. */
+ char * gateways; /* A space-delimited list of default gateway addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty in which case the addresses represent point
+ to point connections. */
+ char * pcscf; /* the Proxy Call State Control Function address
+ via PCO(Protocol Configuration Option) for IMS client. */
+ int mtu; /* MTU received from network
+ Value <= 0 means network has either not sent a value or
+ sent an invalid value */
+} RIL_Data_Call_Response_v11;
typedef enum {
RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */
*/
} RIL_NeighboringCell;
+typedef struct {
+ char lce_status; /* LCE service status:
+ * -1 = not supported;
+ * 0 = stopped;
+ * 1 = active.
+ */
+ unsigned int actual_interval_ms; /* actual LCE reporting interval,
+ * meaningful only if LCEStatus = 1.
+ */
+} RIL_LceStatusInfo;
+
+typedef struct {
+ unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */
+ unsigned char confidence_level; /* capacity estimate confidence: 0-100 */
+ unsigned char lce_suspended; /* LCE report going to be suspended? (e.g., radio
+ * moves to inactive state or network type change)
+ * 1 = suspended;
+ * 0 = not suspended.
+ */
+} RIL_LceDataInfo;
+
/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
typedef enum {
CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
+ CALL_FAIL_NO_ROUTE_TO_DESTINATION = 3,
+ CALL_FAIL_CHANNEL_UNACCEPTABLE = 6,
+ CALL_FAIL_OPERATOR_DETERMINED_BARRING = 8,
CALL_FAIL_NORMAL = 16,
CALL_FAIL_BUSY = 17,
+ CALL_FAIL_NO_USER_RESPONDING = 18,
+ CALL_FAIL_NO_ANSWER_FROM_USER = 19,
+ CALL_FAIL_CALL_REJECTED = 21,
+ CALL_FAIL_NUMBER_CHANGED = 22,
+ CALL_FAIL_PREEMPTION = 25,
+ CALL_FAIL_DESTINATION_OUT_OF_ORDER = 27,
+ CALL_FAIL_INVALID_NUMBER_FORMAT = 28,
+ CALL_FAIL_FACILITY_REJECTED = 29,
+ CALL_FAIL_RESP_TO_STATUS_ENQUIRY = 30,
+ CALL_FAIL_NORMAL_UNSPECIFIED = 31,
CALL_FAIL_CONGESTION = 34,
+ CALL_FAIL_NETWORK_OUT_OF_ORDER = 38,
+ CALL_FAIL_TEMPORARY_FAILURE = 41,
+ CALL_FAIL_SWITCHING_EQUIPMENT_CONGESTION = 42,
+ CALL_FAIL_ACCESS_INFORMATION_DISCARDED = 43,
+ CALL_FAIL_REQUESTED_CIRCUIT_OR_CHANNEL_NOT_AVAILABLE = 44,
+ CALL_FAIL_RESOURCES_UNAVAILABLE_OR_UNSPECIFIED = 47,
+ CALL_FAIL_QOS_UNAVAILABLE = 49,
+ CALL_FAIL_REQUESTED_FACILITY_NOT_SUBSCRIBED = 50,
+ CALL_FAIL_INCOMING_CALLS_BARRED_WITHIN_CUG = 55,
+ CALL_FAIL_BEARER_CAPABILITY_NOT_AUTHORIZED = 57,
+ CALL_FAIL_BEARER_CAPABILITY_UNAVAILABLE = 58,
+ CALL_FAIL_SERVICE_OPTION_NOT_AVAILABLE = 63,
+ CALL_FAIL_BEARER_SERVICE_NOT_IMPLEMENTED = 65,
CALL_FAIL_ACM_LIMIT_EXCEEDED = 68,
+ CALL_FAIL_REQUESTED_FACILITY_NOT_IMPLEMENTED = 69,
+ CALL_FAIL_ONLY_DIGITAL_INFORMATION_BEARER_AVAILABLE = 70,
+ CALL_FAIL_SERVICE_OR_OPTION_NOT_IMPLEMENTED = 79,
+ CALL_FAIL_INVALID_TRANSACTION_IDENTIFIER = 81,
+ CALL_FAIL_USER_NOT_MEMBER_OF_CUG = 87,
+ CALL_FAIL_INCOMPATIBLE_DESTINATION = 88,
+ CALL_FAIL_INVALID_TRANSIT_NW_SELECTION = 91,
+ CALL_FAIL_SEMANTICALLY_INCORRECT_MESSAGE = 95,
+ CALL_FAIL_INVALID_MANDATORY_INFORMATION = 96,
+ CALL_FAIL_MESSAGE_TYPE_NON_IMPLEMENTED = 97,
+ CALL_FAIL_MESSAGE_TYPE_NOT_COMPATIBLE_WITH_PROTOCOL_STATE = 98,
+ CALL_FAIL_INFORMATION_ELEMENT_NON_EXISTENT = 99,
+ CALL_FAIL_CONDITIONAL_IE_ERROR = 100,
+ CALL_FAIL_MESSAGE_NOT_COMPATIBLE_WITH_PROTOCOL_STATE = 101,
+ CALL_FAIL_RECOVERY_ON_TIMER_EXPIRED = 102,
+ CALL_FAIL_PROTOCOL_ERROR_UNSPECIFIED = 111,
+ CALL_FAIL_INTERWORKING_UNSPECIFIED = 127,
CALL_FAIL_CALL_BARRED = 240,
CALL_FAIL_FDN_BLOCKED = 241,
CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242,
CALL_FAIL_IMEI_NOT_ACCEPTED = 243,
+ CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */
+ CALL_FAIL_DIAL_MODIFIED_TO_SS = 245,
+ CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246,
CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000,
CALL_FAIL_CDMA_DROP = 1001,
CALL_FAIL_CDMA_INTERCEPT = 1002,
CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed
during emergency callback mode */
CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */
- CALL_FAIL_ERROR_UNSPECIFIED = 0xffff
+ CALL_FAIL_ERROR_UNSPECIFIED = 0xffff /* This error will be deprecated soon,
+ vendor code should make sure to map error
+ code to specific error */
} RIL_LastCallFailCause;
+typedef struct {
+ RIL_LastCallFailCause cause_code;
+ char * vendor_cause;
+} RIL_LastCallFailCauseInfo;
+
/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */
typedef enum {
PDP_FAIL_NONE = 0, /* No error, connection ok */
as the UI layer needs to distinguish these
cases for error notification and potential retries. */
PDP_FAIL_OPERATOR_BARRED = 0x08, /* no retry */
+ PDP_FAIL_NAS_SIGNALLING = 0x0E,
+ PDP_FAIL_LLC_SNDCP = 0x19,
PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A,
PDP_FAIL_MISSING_UKNOWN_APN = 0x1B, /* no retry */
PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C, /* no retry */
PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */
PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22,
PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */
- PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* restart radio */
+ PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio,
+ based on framework config */
+ PDP_FAIL_QOS_NOT_ACCEPTED = 0x25,
+ PDP_FAIL_NETWORK_FAILURE = 0x26,
+ PDP_FAIL_UMTS_REACTIVATION_REQ = 0x27,
+ PDP_FAIL_FEATURE_NOT_SUPP = 0x28,
+ PDP_FAIL_TFT_SEMANTIC_ERROR = 0x29,
+ PDP_FAIL_TFT_SYTAX_ERROR = 0x2A,
+ PDP_FAIL_UNKNOWN_PDP_CONTEXT = 0x2B,
+ PDP_FAIL_FILTER_SEMANTIC_ERROR = 0x2C,
+ PDP_FAIL_FILTER_SYTAX_ERROR = 0x2D,
+ PDP_FAIL_PDP_WITHOUT_ACTIVE_TFT = 0x2E,
PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */
PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */
PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34,
- PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */
+ PDP_FAIL_ESM_INFO_NOT_RECEIVED = 0x35,
+ PDP_FAIL_PDN_CONN_DOES_NOT_EXIST = 0x36,
+ PDP_FAIL_MULTI_CONN_TO_SAME_PDN_NOT_ALLOWED = 0x37,
+ PDP_FAIL_MAX_ACTIVE_PDP_CONTEXT_REACHED = 0x41,
+ PDP_FAIL_UNSUPPORTED_APN_IN_CURRENT_PLMN = 0x42,
+ PDP_FAIL_INVALID_TRANSACTION_ID = 0x51,
+ PDP_FAIL_MESSAGE_INCORRECT_SEMANTIC = 0x5F,
+ PDP_FAIL_INVALID_MANDATORY_INFO = 0x60,
+ PDP_FAIL_MESSAGE_TYPE_UNSUPPORTED = 0x61,
+ PDP_FAIL_MSG_TYPE_NONCOMPATIBLE_STATE = 0x62,
+ PDP_FAIL_UNKNOWN_INFO_ELEMENT = 0x63,
+ PDP_FAIL_CONDITIONAL_IE_ERROR = 0x64,
+ PDP_FAIL_MSG_AND_PROTOCOL_STATE_UNCOMPATIBLE = 0x65,
+ PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */
+ PDP_FAIL_APN_TYPE_CONFLICT = 0x70,
+ PDP_FAIL_INVALID_PCSCF_ADDR = 0x71,
+ PDP_FAIL_INTERNAL_CALL_PREEMPT_BY_HIGH_PRIO_APN = 0x72,
+ PDP_FAIL_EMM_ACCESS_BARRED = 0x73,
+ PDP_FAIL_EMERGENCY_IFACE_ONLY = 0x74,
+ PDP_FAIL_IFACE_MISMATCH = 0x75,
+ PDP_FAIL_COMPANION_IFACE_IN_USE = 0x76,
+ PDP_FAIL_IP_ADDRESS_MISMATCH = 0x77,
+ PDP_FAIL_IFACE_AND_POL_FAMILY_MISMATCH = 0x78,
+ PDP_FAIL_EMM_ACCESS_BARRED_INFINITE_RETRY = 0x79,
+ PDP_FAIL_AUTH_FAILURE_ON_EMERGENCY_CALL = 0x7A,
/* Not mentioned in the specification */
PDP_FAIL_VOICE_REGISTRATION_FAIL = -1,
mode was up on same APN/data profile - no retry until
tethered call is off */
- PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently */
+ PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently. Will be deprecated soon as
+ new error codes are added making this unnecessary */
} RIL_DataCallFailCause;
/* See RIL_REQUEST_SETUP_DATA_CALL */
typedef enum {
RIL_DATA_PROFILE_DEFAULT = 0,
RIL_DATA_PROFILE_TETHERED = 1,
- RIL_DATA_PROFILE_OEM_BASE = 1000 /* Start of OEM-specific profiles */
+ RIL_DATA_PROFILE_IMS = 2,
+ RIL_DATA_PROFILE_FOTA = 3,
+ RIL_DATA_PROFILE_CBS = 4,
+ RIL_DATA_PROFILE_OEM_BASE = 1000, /* Start of OEM-specific profiles */
+ RIL_DATA_PROFILE_INVALID = 0xFFFFFFFF
} RIL_DataProfile;
/* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */
#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10
-#define RIL_HARDWARE_CONFIG_UUID_LENGTH 64
-
typedef struct {
char numberOfInfoRecs;
RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS];
} RIL_HardwareConfig_Modem;
typedef struct {
- char modemUuid[RIL_HARDWARE_CONFIG_UUID_LENGTH];
+ char modemUuid[MAX_UUID_LENGTH];
} RIL_HardwareConfig_Sim;
typedef struct {
RIL_HardwareConfig_Type type;
- char uuid[RIL_HARDWARE_CONFIG_UUID_LENGTH];
+ char uuid[MAX_UUID_LENGTH];
RIL_HardwareConfig_State state;
union {
RIL_HardwareConfig_Modem modem;
} cfg;
} RIL_HardwareConfig;
+typedef enum {
+ SS_CFU,
+ SS_CF_BUSY,
+ SS_CF_NO_REPLY,
+ SS_CF_NOT_REACHABLE,
+ SS_CF_ALL,
+ SS_CF_ALL_CONDITIONAL,
+ SS_CLIP,
+ SS_CLIR,
+ SS_COLP,
+ SS_COLR,
+ SS_WAIT,
+ SS_BAOC,
+ SS_BAOIC,
+ SS_BAOIC_EXC_HOME,
+ SS_BAIC,
+ SS_BAIC_ROAMING,
+ SS_ALL_BARRING,
+ SS_OUTGOING_BARRING,
+ SS_INCOMING_BARRING
+} RIL_SsServiceType;
+
+typedef enum {
+ SS_ACTIVATION,
+ SS_DEACTIVATION,
+ SS_INTERROGATION,
+ SS_REGISTRATION,
+ SS_ERASURE
+} RIL_SsRequestType;
+
+typedef enum {
+ SS_ALL_TELE_AND_BEARER_SERVICES,
+ SS_ALL_TELESEVICES,
+ SS_TELEPHONY,
+ SS_ALL_DATA_TELESERVICES,
+ SS_SMS_SERVICES,
+ SS_ALL_TELESERVICES_EXCEPT_SMS
+} RIL_SsTeleserviceType;
+
+#define SS_INFO_MAX 4
+#define NUM_SERVICE_CLASSES 7
+
+typedef struct {
+ int numValidIndexes; /* This gives the number of valid values in cfInfo.
+ For example if voice is forwarded to one number and data
+ is forwarded to a different one then numValidIndexes will be
+ 2 indicating total number of valid values in cfInfo.
+ Similarly if all the services are forwarded to the same
+ number then the value of numValidIndexes will be 1. */
+
+ RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data
+ for SS request to query call
+ forward status. see
+ RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */
+} RIL_CfData;
+
+typedef struct {
+ RIL_SsServiceType serviceType;
+ RIL_SsRequestType requestType;
+ RIL_SsTeleserviceType teleserviceType;
+ int serviceClass;
+ RIL_Errno result;
+
+ union {
+ int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET
+ RIL requests. E.g. RIL_REQUSET_GET_CLIR returns
+ two ints, so first two values of ssInfo[] will be
+ used for response if serviceType is SS_CLIR and
+ requestType is SS_INTERROGATION */
+
+ RIL_CfData cfData;
+ };
+} RIL_StkCcUnsolSsResponse;
+
/**
* Data connection power state
*/
int enabled;
} RIL_DataProfileInfo;
+/* Tx Power Levels */
+#define RIL_NUM_TX_POWER_LEVELS 5
+
+typedef struct {
+
+ /* period (in ms) when modem is power collapsed */
+ uint32_t sleep_mode_time_ms;
+
+ /* period (in ms) when modem is awake and in idle mode*/
+ uint32_t idle_mode_time_ms;
+
+ /* period (in ms) for which Tx is active */
+ uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS];
+
+ /* period (in ms) for which Rx is active */
+ uint32_t rx_mode_time_ms;
+} RIL_ActivityStatsInfo;
+
/**
* RIL_REQUEST_GET_SIM_STATUS
*
#define RIL_REQUEST_ENTER_SIM_PIN 2
-
/**
* RIL_REQUEST_ENTER_SIM_PUK
*
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE (radio resetting)
+ * DIAL_MODIFIED_TO_USSD
+ * DIAL_MODIFIED_TO_SS
+ * DIAL_MODIFIED_TO_DIAL
* GENERIC_FAILURE
*/
#define RIL_REQUEST_DIAL 10
* For example, "IP", "IPV6", "IPV4V6", or "PPP".
* ((const char **)data)[7] Optional connection property parameters, format to be defined.
*
- * "response" is a RIL_Data_Call_Response_v6
+ * "response" is a RIL_Data_Call_Response_v11
*
* FIXME may need way to configure QoS settings
*
* SUCCESS
* RADIO_NOT_AVAILABLE
* FDN_CHECK_FAILURE
+ * USSD_MODIFIED_TO_DIAL
+ * USSD_MODIFIED_TO_SS
+ * USSD_MODIFIED_TO_USSD
* GENERIC_FAILURE
*
* See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_GET_CLIR 31
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_SET_CLIR 32
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_SET_CALL_FORWARD 34
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_QUERY_CALL_WAITING 35
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
#define RIL_REQUEST_SET_CALL_WAITING 36
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*
*/
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*
*/
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*
*/
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE (radio resetting)
+ * SS_MODIFIED_TO_DIAL
+ * SS_MODIFIED_TO_USSD
+ * SS_MODIFIED_TO_SS
* GENERIC_FAILURE
*/
*
* "response" is int *
* ((int *)data)[0] contains the session id of the logical channel.
+ * ((int *)data)[1] onwards may optionally contain the select response for the
+ * open channel command with one byte per integer.
*
* Valid errors:
* SUCCESS
/**
* RIL_REQUEST_GET_DC_RT_INFO
*
+ * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
* Requests the Data Connection Real Time Info
*
* "data" is NULL
/**
* RIL_REQUEST_SET_DC_RT_INFO_RATE
*
+ * The request is DEPRECATED
* This is the minimum number of milliseconds between successive
* RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
* at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
* RIL_REQUEST_SET_DATA_PROFILE
*
* Set data profile in modem
+ * Modem should erase existed profiles from framework, and apply new profiles
* "data" is an const RIL_DataProfileInfo **
* "datalen" is count * sizeof(const RIL_DataProfileInfo *)
* "response" is NULL
*/
#define RIL_REQUEST_SHUTDOWN 129
+/**
+ * RIL_REQUEST_GET_RADIO_CAPABILITY
+ *
+ * Used to get phone radio capablility.
+ *
+ * "data" is the RIL_RadioCapability structure
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_RADIO_CAPABILITY 130
+
+/**
+ * RIL_REQUEST_SET_RADIO_CAPABILITY
+ *
+ * Used to set the phones radio capability. Be VERY careful
+ * using this request as it may cause some vendor modems to reset. Because
+ * of the possible modem reset any RIL commands after this one may not be
+ * processed.
+ *
+ * "data" is the RIL_RadioCapability structure
+ *
+ * "response" is the RIL_RadioCapability structure, used to feedback return status
+ *
+ * Valid errors:
+ * SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds.
+ * RADIO_NOT_AVAILABLE
+ * GENERIC_FAILURE
+ */
+#define RIL_REQUEST_SET_RADIO_CAPABILITY 131
+
+/**
+ * RIL_REQUEST_START_LCE
+ *
+ * Start Link Capacity Estimate (LCE) service if supported by the radio.
+ *
+ * "data" is const int *
+ * ((const int*)data)[0] specifies the desired reporting interval (ms).
+ * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_START_LCE 132
+
+/**
+ * RIL_REQUEST_STOP_LCE
+ *
+ * Stop Link Capacity Estimate (LCE) service, the STOP operation should be
+ * idempotent for the radio modem.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_STOP_LCE 133
+
+/**
+ * RIL_REQUEST_PULL_LCEDATA
+ *
+ * Pull LCE service for capacity information.
+ *
+ * "response" is the RIL_LceDataInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_PULL_LCEDATA 134
+
+/**
+ * RIL_REQUEST_GET_ACTIVITY_INFO
+ *
+ * Get modem activity statisitics info.
+ *
+ * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem.
+ * Once the response for the request is sent modem will clear
+ * current statistics information.
+ *
+ * "data" is null
+ * "response" is const RIL_ActivityStatsInfo *
+ *
+ * Valid errors:
+ *
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_ACTIVITY_INFO 135
/***********************************************************************/
*/
#define RIL_UNSOL_ON_USSD_REQUEST 1007
-
/**
* RIL_UNSOL_NITZ_TIME_RECEIVED
*
/**
* RIL_UNSOL_DC_RT_INFO_CHANGED
*
+ * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
* Sent when the DC_RT_STATE changes but the time
* between these messages must not be less than the
* value set by RIL_REQUEST_SET_DC_RT_RATE.
*/
#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041
+/**
+ * RIL_UNSOL_RADIO_CAPABILITY
+ *
+ * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes.
+ * Returns the phone radio capability exactly as
+ * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the
+ * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY.
+ *
+ * "data" is the RIL_RadioCapability structure
+ */
+#define RIL_UNSOL_RADIO_CAPABILITY 1042
+
+/*
+ * RIL_UNSOL_ON_SS
+ *
+ * Called when SS response is received when DIAL/USSD/SS is changed to SS by
+ * call control.
+ *
+ * "data" is const RIL_StkCcUnsolSsResponse *
+ *
+ */
+#define RIL_UNSOL_ON_SS 1043
+
+/**
+ * RIL_UNSOL_STK_CC_ALPHA_NOTIFY
+ *
+ * Called when there is an ALPHA from UICC during Call Control.
+ *
+ * "data" is const char * containing ALPHA string from UICC in UTF-8 format.
+ *
+ */
+#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044
+
+/**
+ * RIL_UNSOL_LCEDATA_RECV
+ *
+ * Called when there is an incoming Link Capacity Estimate (LCE) info report.
+ *
+ * "data" is the RIL_LceDataInfo structure.
+ *
+ */
+#define RIL_UNSOL_LCEDATA_RECV 1045
+
/***********************************************************************/
+
#if defined(ANDROID_MULTI_SIM)
/**
* RIL_Request Function pointer
OSDN Git Service
