#define SIM_COUNT 1
#endif
-#define RIL_VERSION 11 /* Current version */
+/*
+ * RIL version.
+ * Value of RIL_VERSION should not be changed in future. Here onwards,
+ * when a new change is supposed to be introduced which could involve new
+ * schemes added like Wakelocks, data structures added/updated, etc, we would
+ * just document RIL version associated with that change below. When OEM updates its
+ * RIL with those changes, they would return that new RIL version during RIL_REGISTER.
+ * We should make use of the returned version by vendor to identify appropriate scheme
+ * or data structure version to use.
+ *
+ * Documentation of RIL version and associated changes
+ * RIL_VERSION = 11 : This version corresponds to updated data structures namely
+ * RIL_Data_Call_Response_v11, RIL_SIM_IO_v6, RIL_CardStatus_v6,
+ * RIL_SimRefreshResponse_v7, RIL_CDMA_CallWaiting_v6,
+ * RIL_LTE_SignalStrength_v8 & RIL_SignalStrength_v10.
+ *
+ * RIL_VERSION = 12 : This version includes new wakelock semantics.
+ */
+#define RIL_VERSION 11
+#define LAST_IMPRECISE_RIL_VERSION 11 // Better self-documented name
#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */
RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */
RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */
- RIL_E_SS_MODIFIED_TO_SS = 27 /* SS request modified to different SS request */
+ RIL_E_SS_MODIFIED_TO_SS = 27, /* SS request modified to different SS request */
+ RIL_E_LCE_NOT_SUPPORTED = 36 /* LCE service not supported(36 in RILConstants.java) */
} RIL_Errno;
*/
} RIL_NeighboringCell;
+typedef struct {
+ char lce_status; /* LCE service status:
+ * -1 = not supported;
+ * 0 = stopped;
+ * 1 = active.
+ */
+ unsigned int actual_interval_ms; /* actual LCE reporting interval,
+ * meaningful only if LCEStatus = 1.
+ */
+} RIL_LceStatusInfo;
+
+typedef struct {
+ unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */
+ unsigned char confidence_level; /* capacity estimate confidence: 0-100 */
+ unsigned char lce_suspended; /* LCE report going to be suspended? (e.g., radio
+ * moves to inactive state or network type change)
+ * 1 = suspended;
+ * 0 = not suspended.
+ */
+} RIL_LceDataInfo;
+
/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
typedef enum {
CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
+ CALL_FAIL_NO_ROUTE_TO_DESTINATION = 3,
+ CALL_FAIL_CHANNEL_UNACCEPTABLE = 6,
+ CALL_FAIL_OPERATOR_DETERMINED_BARRING = 8,
CALL_FAIL_NORMAL = 16,
CALL_FAIL_BUSY = 17,
+ CALL_FAIL_NO_USER_RESPONDING = 18,
+ CALL_FAIL_NO_ANSWER_FROM_USER = 19,
+ CALL_FAIL_CALL_REJECTED = 21,
+ CALL_FAIL_NUMBER_CHANGED = 22,
+ CALL_FAIL_PREEMPTION = 25,
+ CALL_FAIL_DESTINATION_OUT_OF_ORDER = 27,
+ CALL_FAIL_INVALID_NUMBER_FORMAT = 28,
+ CALL_FAIL_FACILITY_REJECTED = 29,
+ CALL_FAIL_RESP_TO_STATUS_ENQUIRY = 30,
+ CALL_FAIL_NORMAL_UNSPECIFIED = 31,
CALL_FAIL_CONGESTION = 34,
+ CALL_FAIL_NETWORK_OUT_OF_ORDER = 38,
+ CALL_FAIL_TEMPORARY_FAILURE = 41,
+ CALL_FAIL_SWITCHING_EQUIPMENT_CONGESTION = 42,
+ CALL_FAIL_ACCESS_INFORMATION_DISCARDED = 43,
+ CALL_FAIL_REQUESTED_CIRCUIT_OR_CHANNEL_NOT_AVAILABLE = 44,
+ CALL_FAIL_RESOURCES_UNAVAILABLE_OR_UNSPECIFIED = 47,
+ CALL_FAIL_QOS_UNAVAILABLE = 49,
+ CALL_FAIL_REQUESTED_FACILITY_NOT_SUBSCRIBED = 50,
+ CALL_FAIL_INCOMING_CALLS_BARRED_WITHIN_CUG = 55,
+ CALL_FAIL_BEARER_CAPABILITY_NOT_AUTHORIZED = 57,
+ CALL_FAIL_BEARER_CAPABILITY_UNAVAILABLE = 58,
+ CALL_FAIL_SERVICE_OPTION_NOT_AVAILABLE = 63,
+ CALL_FAIL_BEARER_SERVICE_NOT_IMPLEMENTED = 65,
CALL_FAIL_ACM_LIMIT_EXCEEDED = 68,
+ CALL_FAIL_REQUESTED_FACILITY_NOT_IMPLEMENTED = 69,
+ CALL_FAIL_ONLY_DIGITAL_INFORMATION_BEARER_AVAILABLE = 70,
+ CALL_FAIL_SERVICE_OR_OPTION_NOT_IMPLEMENTED = 79,
+ CALL_FAIL_INVALID_TRANSACTION_IDENTIFIER = 81,
+ CALL_FAIL_USER_NOT_MEMBER_OF_CUG = 87,
+ CALL_FAIL_INCOMPATIBLE_DESTINATION = 88,
+ CALL_FAIL_INVALID_TRANSIT_NW_SELECTION = 91,
+ CALL_FAIL_SEMANTICALLY_INCORRECT_MESSAGE = 95,
+ CALL_FAIL_INVALID_MANDATORY_INFORMATION = 96,
+ CALL_FAIL_MESSAGE_TYPE_NON_IMPLEMENTED = 97,
+ CALL_FAIL_MESSAGE_TYPE_NOT_COMPATIBLE_WITH_PROTOCOL_STATE = 98,
+ CALL_FAIL_INFORMATION_ELEMENT_NON_EXISTENT = 99,
+ CALL_FAIL_CONDITIONAL_IE_ERROR = 100,
+ CALL_FAIL_MESSAGE_NOT_COMPATIBLE_WITH_PROTOCOL_STATE = 101,
+ CALL_FAIL_RECOVERY_ON_TIMER_EXPIRED = 102,
+ CALL_FAIL_PROTOCOL_ERROR_UNSPECIFIED = 111,
+ CALL_FAIL_INTERWORKING_UNSPECIFIED = 127,
CALL_FAIL_CALL_BARRED = 240,
CALL_FAIL_FDN_BLOCKED = 241,
CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242,
CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed
during emergency callback mode */
CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */
- CALL_FAIL_ERROR_UNSPECIFIED = 0xffff
+ CALL_FAIL_ERROR_UNSPECIFIED = 0xffff /* This error will be deprecated soon,
+ vendor code should make sure to map error
+ code to specific error */
} RIL_LastCallFailCause;
+typedef struct {
+ RIL_LastCallFailCause cause_code;
+ char * vendor_cause;
+} RIL_LastCallFailCauseInfo;
+
/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */
typedef enum {
PDP_FAIL_NONE = 0, /* No error, connection ok */
as the UI layer needs to distinguish these
cases for error notification and potential retries. */
PDP_FAIL_OPERATOR_BARRED = 0x08, /* no retry */
+ PDP_FAIL_NAS_SIGNALLING = 0x0E,
+ PDP_FAIL_LLC_SNDCP = 0x19,
PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A,
PDP_FAIL_MISSING_UKNOWN_APN = 0x1B, /* no retry */
PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C, /* no retry */
PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */
PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio,
based on framework config */
+ PDP_FAIL_QOS_NOT_ACCEPTED = 0x25,
+ PDP_FAIL_NETWORK_FAILURE = 0x26,
+ PDP_FAIL_UMTS_REACTIVATION_REQ = 0x27,
+ PDP_FAIL_FEATURE_NOT_SUPP = 0x28,
+ PDP_FAIL_TFT_SEMANTIC_ERROR = 0x29,
+ PDP_FAIL_TFT_SYTAX_ERROR = 0x2A,
+ PDP_FAIL_UNKNOWN_PDP_CONTEXT = 0x2B,
+ PDP_FAIL_FILTER_SEMANTIC_ERROR = 0x2C,
+ PDP_FAIL_FILTER_SYTAX_ERROR = 0x2D,
+ PDP_FAIL_PDP_WITHOUT_ACTIVE_TFT = 0x2E,
PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */
PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */
PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34,
- PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */
+ PDP_FAIL_ESM_INFO_NOT_RECEIVED = 0x35,
+ PDP_FAIL_PDN_CONN_DOES_NOT_EXIST = 0x36,
+ PDP_FAIL_MULTI_CONN_TO_SAME_PDN_NOT_ALLOWED = 0x37,
+ PDP_FAIL_MAX_ACTIVE_PDP_CONTEXT_REACHED = 0x41,
+ PDP_FAIL_UNSUPPORTED_APN_IN_CURRENT_PLMN = 0x42,
+ PDP_FAIL_INVALID_TRANSACTION_ID = 0x51,
+ PDP_FAIL_MESSAGE_INCORRECT_SEMANTIC = 0x5F,
+ PDP_FAIL_INVALID_MANDATORY_INFO = 0x60,
+ PDP_FAIL_MESSAGE_TYPE_UNSUPPORTED = 0x61,
+ PDP_FAIL_MSG_TYPE_NONCOMPATIBLE_STATE = 0x62,
+ PDP_FAIL_UNKNOWN_INFO_ELEMENT = 0x63,
+ PDP_FAIL_CONDITIONAL_IE_ERROR = 0x64,
+ PDP_FAIL_MSG_AND_PROTOCOL_STATE_UNCOMPATIBLE = 0x65,
+ PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */
+ PDP_FAIL_APN_TYPE_CONFLICT = 0x70,
+ PDP_FAIL_INVALID_PCSCF_ADDR = 0x71,
+ PDP_FAIL_INTERNAL_CALL_PREEMPT_BY_HIGH_PRIO_APN = 0x72,
+ PDP_FAIL_EMM_ACCESS_BARRED = 0x73,
+ PDP_FAIL_EMERGENCY_IFACE_ONLY = 0x74,
+ PDP_FAIL_IFACE_MISMATCH = 0x75,
+ PDP_FAIL_COMPANION_IFACE_IN_USE = 0x76,
+ PDP_FAIL_IP_ADDRESS_MISMATCH = 0x77,
+ PDP_FAIL_IFACE_AND_POL_FAMILY_MISMATCH = 0x78,
+ PDP_FAIL_EMM_ACCESS_BARRED_INFINITE_RETRY = 0x79,
+ PDP_FAIL_AUTH_FAILURE_ON_EMERGENCY_CALL = 0x7A,
/* Not mentioned in the specification */
PDP_FAIL_VOICE_REGISTRATION_FAIL = -1,
mode was up on same APN/data profile - no retry until
tethered call is off */
- PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently */
+ PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently. Will be deprecated soon as
+ new error codes are added making this unnecessary */
} RIL_DataCallFailCause;
/* See RIL_REQUEST_SETUP_DATA_CALL */
int enabled;
} RIL_DataProfileInfo;
+/* Tx Power Levels */
+#define RIL_NUM_TX_POWER_LEVELS 5
+
+typedef struct {
+
+ /* period (in ms) when modem is power collapsed */
+ uint32_t sleep_mode_time_ms;
+
+ /* period (in ms) when modem is awake and in idle mode*/
+ uint32_t idle_mode_time_ms;
+
+ /* period (in ms) for which Tx is active */
+ uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS];
+
+ /* period (in ms) for which Rx is active */
+ uint32_t rx_mode_time_ms;
+} RIL_ActivityStatsInfo;
+
/**
* RIL_REQUEST_GET_SIM_STATUS
*
/**
* RIL_REQUEST_GET_DC_RT_INFO
*
+ * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
* Requests the Data Connection Real Time Info
*
* "data" is NULL
/**
* RIL_REQUEST_SET_DC_RT_INFO_RATE
*
+ * The request is DEPRECATED
* This is the minimum number of milliseconds between successive
* RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
* at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
*
* Used to get phone radio capablility.
*
- * "data" is int *
- * ((int *)data)[0] is the phone radio access family defined in
- * RadioAccessFamily. It's a bit mask value to represent the support type.
+ * "data" is the RIL_RadioCapability structure
*
* Valid errors:
* SUCCESS
*/
#define RIL_REQUEST_SET_RADIO_CAPABILITY 131
+/**
+ * RIL_REQUEST_START_LCE
+ *
+ * Start Link Capacity Estimate (LCE) service if supported by the radio.
+ *
+ * "data" is const int *
+ * ((const int*)data)[0] specifies the desired reporting interval (ms).
+ * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_START_LCE 132
+
+/**
+ * RIL_REQUEST_STOP_LCE
+ *
+ * Stop Link Capacity Estimate (LCE) service, the STOP operation should be
+ * idempotent for the radio modem.
+ *
+ * "response" is the RIL_LceStatusInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_STOP_LCE 133
+
+/**
+ * RIL_REQUEST_PULL_LCEDATA
+ *
+ * Pull LCE service for capacity information.
+ *
+ * "response" is the RIL_LceDataInfo.
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * LCE_NOT_SUPPORTED
+ */
+#define RIL_REQUEST_PULL_LCEDATA 134
+
+/**
+ * RIL_REQUEST_GET_ACTIVITY_INFO
+ *
+ * Get modem activity statisitics info.
+ *
+ * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem.
+ * Once the response for the request is sent modem will clear
+ * current statistics information.
+ *
+ * "data" is null
+ * "response" is const RIL_ActivityStatsInfo *
+ *
+ * Valid errors:
+ *
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ */
+#define RIL_REQUEST_GET_ACTIVITY_INFO 135
/***********************************************************************/
/**
* RIL_UNSOL_DC_RT_INFO_CHANGED
*
+ * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
* Sent when the DC_RT_STATE changes but the time
* between these messages must not be less than the
* value set by RIL_REQUEST_SET_DC_RT_RATE.
*/
#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044
+/**
+ * RIL_UNSOL_LCEDATA_RECV
+ *
+ * Called when there is an incoming Link Capacity Estimate (LCE) info report.
+ *
+ * "data" is the RIL_LceDataInfo structure.
+ *
+ */
+#define RIL_UNSOL_LCEDATA_RECV 1045
+
/***********************************************************************/
OSDN Git Service
