arm64: cputype: Add missing MIDR values for Cortex-A72 and Cortex-A75

From: Will Deacon <will.deacon@arm.com>

commit a65d219fe5dc7887fd5ca04c2ac3e9a34feb8dfc upstream.

Hook up MIDR values for the Cortex-A72 and Cortex-A75 CPUs, since they
will soon need MIDR matches for hardening the branch predictor.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Apply BP hardening for suspicious interrupts from EL0

From: Will Deacon <will.deacon@arm.com>

commit 30d88c0e3ace625a92eead9ca0ad94093a8f59fe upstream.

It is possible to take an IRQ from EL0 following a branch to a kernel
address in such a way that the IRQ is prioritised over the instruction
abort. Whilst an attacker would need to get the stars to align here,
it might be sufficient with enough calibration so perform BP hardening
in the rare case that we see a kernel address in the ELR when handling
an IRQ from EL0.

Reported-by: Dan Hettena <dhettena@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Apply BP hardening for high-priority synchronous exceptions

From: Will Deacon <will.deacon@arm.com>

commit 5dfc6ed27710c42cbc15db5c0d4475699991da0a upstream.

Software-step and PC alignment fault exceptions have higher priority than
instruction abort exceptions, so apply the BP hardening hooks there too
if the user PC appears to reside in kernel space.

Reported-by: Dan Hettena <dhettena@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: Use per-CPU vector when BP hardening is enabled

From: Marc Zyngier <marc.zyngier@arm.com>

commit 6840bdd73d07216ab4bc46f5a8768c37ea519038 upstream.

Now that we have per-CPU vectors, let's plug then in the KVM/arm64 code.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream, use cpus_have_cap()]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Introduce lm_alias

From: Laura Abbott <labbott@redhat.com>

commit 568c5fe5a54f2654f5a4c599c45b8a62ed9a2013 upstream.

Certain architectures may have the kernel image mapped separately to
alias the linear map. Introduce a macro lm_alias to translate a kernel
image symbol into its linear alias. This is used in part with work to
add CONFIG_DEBUG_VIRTUAL support for arm64.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Move BP hardening to check_and_switch_context

From: Marc Zyngier <marc.zyngier@arm.com>

commit a8e4c0a919ae310944ed2c9ace11cf3ccd8a609b upstream.

We call arm64_apply_bp_hardening() from post_ttbr_update_workaround,
which has the unexpected consequence of being triggered on every
exception return to userspace when ARM64_SW_TTBR0_PAN is selected,
even if no context switch actually occured.

This is a bit suboptimal, and it would be more logical to only
invalidate the branch predictor when we actually switch to
a different mm.

In order to solve this, move the call to arm64_apply_bp_hardening()
into check_and_switch_context(), where we're guaranteed to pick
a different mm context.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add skeleton to harden the branch predictor against aliasing attacks

From: Will Deacon <will.deacon@arm.com>

commit 0f15adbb2861ce6f75ccfc5a92b19eae0ef327d0 upstream.

Aliasing attacks against CPU branch predictors can allow an attacker to
redirect speculative control flow on some CPUs and potentially divulge
information from one context to another.

This patch adds initial skeleton code behind a new Kconfig option to
enable implementation-specific mitigations against these attacks for
CPUs that are affected.

Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: copy bp hardening cb via text mapping]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Move post_ttbr_update_workaround to C code

From: Marc Zyngier <marc.zyngier@arm.com>

commit 95e3de3590e3f2358bb13f013911bc1bfa5d3f53 upstream.

We will soon need to invoke a CPU-specific function pointer after changing
page tables, so move post_ttbr_update_workaround out into C code to make
this possible.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro

From: Catalin Marinas <catalin.marinas@arm.com>

commit f33bcf03e6079668da6bf4eec4a7dcf9289131d0 upstream.

This patch takes the errata workaround code out of cpu_do_switch_mm into
a dedicated post_ttbr0_update_workaround macro which will be reused in a
subsequent patch.

Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/firmware: Expose psci_get_version through psci_ops structure

From: Will Deacon <will.deacon@arm.com>

commit d68e3ba5303f7e1099f51fdcd155f5263da8569b upstream.

Entry into recent versions of ARM Trusted Firmware will invalidate the CPU
branch predictor state in order to protect against aliasing attacks.

This patch exposes the PSCI "VERSION" function via psci_ops, so that it
can be invoked outside of the PSCI driver where necessary.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: Pass capability structure to ->enable callback

From: Will Deacon <will.deacon@arm.com>

commit 0a0d111d40fd1dc588cc590fab6b55d86ddc71d3 upstream.

In order to invoke the CPU capability ->matches callback from the ->enable
callback for applying local-CPU workarounds, we need a handle on the
capability structure.

This patch passes a pointer to the capability structure to the ->enable
callback.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Run enable method for errata work arounds on late CPUs

From: Suzuki K Poulose <suzuki.poulose@arm.com>

commit 55b35d070c2534dfb714b883f3c3ae05d02032da upstream.

When a CPU is brought up after we have finalised the system
wide capabilities (i.e, features and errata), we make sure the
new CPU doesn't need a new errata work around which has not been
detected already. However we don't run enable() method on the new
CPU for the errata work arounds already detected. This could
cause the new CPU running without potential work arounds.
It is upto the "enable()" method to decide if this CPU should
do something about the errata.

Fixes: commit 6a6efbb45b7d95c84 ("arm64: Verify CPU errata work arounds on hotplugged CPU")
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early

From: James Morse <james.morse@arm.com>

commit edf298cfce47ab7279d03b5203ae2ef3a58e49db upstream.

this_cpu_has_cap() tests caps->desc not caps->matches, so it stops
walking the list when it finds a 'silent' feature, instead of
walking to the end of the list.

Prior to v4.6's 644c2ae198412 ("arm64: cpufeature: Test 'matches' pointer
to find the end of the list") we always tested desc to find the end of
a capability list. This was changed for dubious things like PAN_NOT_UAO.
v4.7's e3661b128e53e ("arm64: Allow a capability to be checked on
single CPU") added this_cpu_has_cap() using the old desc style test.

CC: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: uaccess: Mask __user pointers for __arch_{clear, copy_*}_user

From: Will Deacon <will.deacon@arm.com>

commit f71c2ffcb20dd8626880747557014bb9a61eb90e upstream.

Like we've done for get_user and put_user, ensure that user pointers
are masked before invoking the underlying __arch_{clear,copy_*}_user
operations.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: fixup for v4.9-style uaccess primitives]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: uaccess: Don't bother eliding access_ok checks in __{get, put}_user

From: Will Deacon <will.deacon@arm.com>

commit 84624087dd7e3b482b7b11c170ebc1f329b3a218 upstream.

access_ok isn't an expensive operation once the addr_limit for the current
thread has been loaded into the cache. Given that the initial access_ok
check preceding a sequence of __{get,put}_user operations will take
the brunt of the miss, we can make the __* variants identical to the
full-fat versions, which brings with it the benefits of address masking.

The likely cost in these sequences will be from toggling PAN/UAO, which
we can address later by implementing the *_unsafe versions.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: uaccess: Prevent speculative use of the current addr_limit

From: Will Deacon <will.deacon@arm.com>

commit c2f0ad4fc089cff81cef6a13d04b399980ecbfcc upstream.

A mispredicted conditional call to set_fs could result in the wrong
addr_limit being forwarded under speculation to a subsequent access_ok
check, potentially forming part of a spectre-v1 attack using uaccess
routines.

This patch prevents this forwarding from taking place, but putting heavy
barriers in set_fs after writing the addr_limit.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Ensure branch through syscall table is bounded under speculation

From: Will Deacon <will.deacon@arm.com>

commit 6314d90e64936c584f300a52ef173603fb2461b5 upstream.

In a similar manner to array_index_mask_nospec, this patch introduces an
assembly macro (mask_nospec64) which can be used to bound a value under
speculation. This macro is then used to ensure that the indirect branch
through the syscall table is bounded under speculation, with out-of-range
addresses speculating as calls to sys_io_setup (0).

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: use existing scno & sc_nr definitions]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Use pointer masking to limit uaccess speculation

From: Robin Murphy <robin.murphy@arm.com>

commit 4d8efc2d5ee4c9ccfeb29ee8afd47a8660d0c0ce upstream.

Similarly to x86, mitigate speculation past an access_ok() check by
masking the pointer against the address limit before use.

Even if we don't expect speculative writes per se, it is plausible that
a CPU may still speculate at least as far as fetching a cache line for
writing, hence we also harden put_user() and clear_user() for peace of
mind.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Make USER_DS an inclusive limit

From: Robin Murphy <robin.murphy@arm.com>

commit 51369e398d0d33e8f524314e672b07e8cf870e79 upstream.

Currently, USER_DS represents an exclusive limit while KERNEL_DS is
inclusive. In order to do some clever trickery for speculation-safe
masking, we need them both to behave equivalently - there aren't enough
bits to make KERNEL_DS exclusive, so we have precisely one option. This
also happens to correct a longstanding false negative for a range
ending on the very top byte of kernel memory.

Mark Rutland points out that we've actually got the semantics of
addresses vs. segments muddled up in most of the places we need to
amend, so shuffle the {USER,KERNEL}_DS definitions around such that we
can correct those properly instead of just pasting "-1"s everywhere.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: avoid dependence on TTBR0 SW PAN and THREAD_INFO_IN_TASK_STRUCT]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: move TASK_* definitions to <asm/processor.h>

From: Yury Norov <ynorov@caviumnetworks.com>

commit eef94a3d09aab437c8c254de942d8b1aa76455e2 upstream.

ILP32 series [1] introduces the dependency on <asm/is_compat.h> for
TASK_SIZE macro. Which in turn requires <asm/thread_info.h>, and
<asm/thread_info.h> include <asm/memory.h>, giving a circular dependency,
because TASK_SIZE is currently located in <asm/memory.h>.

In other architectures, TASK_SIZE is defined in <asm/processor.h>, and
moving TASK_SIZE there fixes the problem.

Discussion: https://patchwork.kernel.org/patch/9929107/

[1] https://github.com/norov/linux/tree/ilp32-next

CC: Will Deacon <will.deacon@arm.com>
CC: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[v4.9: necessary for making USER_DS an inclusive limit]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Implement array_index_mask_nospec()

From: Robin Murphy <robin.murphy@arm.com>

commit 022620eed3d0bc4bf2027326f599f5ad71c2ea3f upstream.

Provide an optimised, assembly implementation of array_index_mask_nospec()
for arm64 so that the compiler is not in a position to transform the code
in ways which affect its ability to inhibit speculation (e.g. by introducing
conditional branches).

This is similar to the sequence used by x86, modulo architectural differences
in the carry/borrow flags.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: barrier: Add CSDB macros to control data-value prediction

From: Will Deacon <will.deacon@arm.com>

commit 669474e772b952b14f4de4845a1558fd4c0414a4 upstream.

For CPUs capable of data value prediction, CSDB waits for any outstanding
predictions to architecturally resolve before allowing speculative execution
to continue. Provide macros to expose it to the arch code.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon: hide pointless #warning when compile testing

commit c02216acf4177c4411d33735c81cad687790fa59 upstream.

In randconfig testing, we sometimes get this warning:

drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
 #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \

This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit 31bb90f1cd08 ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.

For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.

Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix use-after-free in uprobe_perf_close()

commit 621b6d2ea297d0fb6030452c5bcd221f12165fcf upstream.

A use-after-free bug was caught by KASAN while running usdt related
code (BCC project. bcc/tests/python/test_usdt2.py):

==================================================================
BUG: KASAN: use-after-free in uprobe_perf_close+0x222/0x3b0
Read of size 4 at addr ffff880384f9b4a4 by task test_usdt2.py/870

CPU: 4 PID: 870 Comm: test_usdt2.py Tainted: G        W         4.16.0-next-20180409 #215
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xc7/0x15b
 ? show_regs_print_info+0x5/0x5
 ? printk+0x9c/0xc3
 ? kmsg_dump_rewind_nolock+0x6e/0x6e
 ? uprobe_perf_close+0x222/0x3b0
 print_address_description+0x83/0x3a0
 ? uprobe_perf_close+0x222/0x3b0
 kasan_report+0x1dd/0x460
 ? uprobe_perf_close+0x222/0x3b0
 uprobe_perf_close+0x222/0x3b0
 ? probes_open+0x180/0x180
 ? free_filters_list+0x290/0x290
 trace_uprobe_register+0x1bb/0x500
 ? perf_event_attach_bpf_prog+0x310/0x310
 ? probe_event_disable+0x4e0/0x4e0
 perf_uprobe_destroy+0x63/0xd0
 _free_event+0x2bc/0xbd0
 ? lockdep_rcu_suspicious+0x100/0x100
 ? ring_buffer_attach+0x550/0x550
 ? kvm_sched_clock_read+0x1a/0x30
 ? perf_event_release_kernel+0x3e4/0xc00
 ? __mutex_unlock_slowpath+0x12e/0x540
 ? wait_for_completion+0x430/0x430
 ? lock_downgrade+0x3c0/0x3c0
 ? lock_release+0x980/0x980
 ? do_raw_spin_trylock+0x118/0x150
 ? do_raw_spin_unlock+0x121/0x210
 ? do_raw_spin_trylock+0x150/0x150
 perf_event_release_kernel+0x5d4/0xc00
 ? put_event+0x30/0x30
 ? fsnotify+0xd2d/0xea0
 ? sched_clock_cpu+0x18/0x1a0
 ? __fsnotify_update_child_dentry_flags.part.0+0x1b0/0x1b0
 ? pvclock_clocksource_read+0x152/0x2b0
 ? pvclock_read_flags+0x80/0x80
 ? kvm_sched_clock_read+0x1a/0x30
 ? sched_clock_cpu+0x18/0x1a0
 ? pvclock_clocksource_read+0x152/0x2b0
 ? locks_remove_file+0xec/0x470
 ? pvclock_read_flags+0x80/0x80
 ? fcntl_setlk+0x880/0x880
 ? ima_file_free+0x8d/0x390
 ? lockdep_rcu_suspicious+0x100/0x100
 ? ima_file_check+0x110/0x110
 ? fsnotify+0xea0/0xea0
 ? kvm_sched_clock_read+0x1a/0x30
 ? rcu_note_context_switch+0x600/0x600
 perf_release+0x21/0x40
 __fput+0x264/0x620
 ? fput+0xf0/0xf0
 ? do_raw_spin_unlock+0x121/0x210
 ? do_raw_spin_trylock+0x150/0x150
 ? SyS_fchdir+0x100/0x100
 ? fsnotify+0xea0/0xea0
 task_work_run+0x14b/0x1e0
 ? task_work_cancel+0x1c0/0x1c0
 ? copy_fd_bitmaps+0x150/0x150
 ? vfs_read+0xe5/0x260
 exit_to_usermode_loop+0x17b/0x1b0
 ? trace_event_raw_event_sys_exit+0x1a0/0x1a0
 do_syscall_64+0x3f6/0x490
 ? syscall_return_slowpath+0x2c0/0x2c0
 ? lockdep_sys_exit+0x1f/0xaa
 ? syscall_return_slowpath+0x1a3/0x2c0
 ? lockdep_sys_exit+0x1f/0xaa
 ? prepare_exit_to_usermode+0x11c/0x1e0
 ? enter_from_user_mode+0x30/0x30
random: crng init done
 ? __put_user_4+0x1c/0x30
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f41d95f9340
RSP: 002b:00007fffe71e4268 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 000000000000000d RCX: 00007f41d95f9340
RDX: 0000000000000000 RSI: 0000000000002401 RDI: 000000000000000d
RBP: 0000000000000000 R08: 00007f41ca8ff700 R09: 00007f41d996dd1f
R10: 00007fffe71e41e0 R11: 0000000000000246 R12: 00007fffe71e4330
R13: 0000000000000000 R14: fffffffffffffffc R15: 00007fffe71e4290

Allocated by task 870:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc_node+0x11a/0x430
 copy_process.part.19+0x11a0/0x41c0
 _do_fork+0x1be/0xa20
 do_syscall_64+0x198/0x490
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Freed by task 0:
 __kasan_slab_free+0x12e/0x180
 kmem_cache_free+0x102/0x4d0
 free_task+0xfe/0x160
 __put_task_struct+0x189/0x290
 delayed_put_task_struct+0x119/0x250
 rcu_process_callbacks+0xa6c/0x1b60
 __do_softirq+0x238/0x7ae

The buggy address belongs to the object at ffff880384f9b480
 which belongs to the cache task_struct of size 12928

It occurs because task_struct is freed before perf_event which refers
to the task and task flags are checked while teardown of the event.
perf_event_alloc() assigns task_struct to hw.target of perf_event,
but there is no reference counting for it.

As a fix we get_task_struct() in perf_event_alloc() at above mentioned
assignment and put_task_struct() in _free_event().

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 63b6da39bb38e8f1a1ef3180d32a39d6 ("perf: Fix perf_event_exit_task() race")
Link: http://lkml.kernel.org/r/20180409100346.6416-1-bhole_prashant_q7@lab.ntt.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix timestamp following overflow

commit 91d29b288aed3406caf7c454bf2b898c96cfd177 upstream.

timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.

If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.

However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.

Suppress the estimate by setting timestamp_insn_cnt to zero.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix error recovery from missing TIP packet

commit 1c196a6c771c47a2faa63d38d913e03284f73a16 upstream.

When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix sync_switch

commit 63d8e38f6ae6c36dd5b5ba0e8c112e8861532ea2 upstream.

sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.

The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.

The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.

That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix overlap detection to identify consecutive buffers correctly

commit 117db4b27bf08dba412faf3924ba55fe970c57b8 upstream.

Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: do not mark HV_PCIE as perf_device

commit 238064f13d057390a8c5e1a6a80f4f0a0ec46499 upstream.

The pci-hyperv driver's channel callback hv_pci_onchannelcallback() is not
really a hot path, so we don't need to mark it as a perf_device, meaning
with this patch all HV_PCIE channels' target_cpu will be CPU0.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix out of array access in match_pci_device()

commit 615b2665fd20c327b631ff1e79426775de748094 upstream.

As found by the ubsan checker, the value of the 'index' variable can be
out of range for the bc[] array:

UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21
index 6 is out of range for type 'char [6]'
Backtrace:
 [<104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80
 [<1019d83c>] check_parent+0xc0/0x170
 [<1019d91c>] descend_children+0x30/0x6c
 [<1059e164>] device_for_each_child+0x60/0x98
 [<1019cd54>] parse_tree_node+0x40/0x54
 [<1019d86c>] check_parent+0xf0/0x170
 [<1019d91c>] descend_children+0x30/0x6c
 [<1059e164>] device_for_each_child+0x60/0x98
 [<1019d938>] descend_children+0x4c/0x6c
 [<1059e164>] device_for_each_child+0x60/0x98
 [<1019cd54>] parse_tree_node+0x40/0x54
 [<1019cffc>] hwpath_to_device+0xa4/0xc4

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-compat-ioctl32: don't oops on overlay

commit 85ea29f19eab56ec16ec6b92bc67305998706afa upstream.

At put_v4l2_window32(), it tries to access kp->clips. However,
kp points to an userspace pointer. So, it should be obtained
via get_user(), otherwise it can OOPS:

 vivid-000: ==================  END STATUS  ==================
 BUG: unable to handle kernel paging request at 00000000fffb18e0
 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
 PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067
 Oops: 0001 [#1] SMP
 Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media]
 CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107
 Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000
 RIP: 0010:[<ffffffffc05468d9>]  [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
 RSP: 0018:ffff8803f5643e28  EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4
 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8
 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378
 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0
 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980
 CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0
 Stack:
  00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600
  ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0
  ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640
 Call Trace:
  [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev]
  [<ffffffff81301460>] ? file_has_perm+0x70/0xc0
  [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200
  [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21
 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f
 RIP  [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
 RSP <ffff8803f5643e28>
 CR2: 00000000fffb18e0

Tested with vivid driver on Kernel v3.18.102.

Same bug happens upstream too:

 BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev]
 Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713

 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108
 Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
 Call Trace:
  dump_stack+0x5c/0x7c
  kasan_report+0x164/0x380
  ? __put_v4l2_format32+0x98/0x4d0 [videodev]
  __put_v4l2_format32+0x98/0x4d0 [videodev]
  v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
  ? __fsnotify_inode_delete+0x20/0x20
  ? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
  compat_SyS_ioctl+0x646/0x14d0
  ? do_ioctl+0x30/0x30
  do_fast_syscall_32+0x191/0x3f4
  entry_SYSENTER_compat+0x6b/0x7a
 ==================================================================
 Disabling lock debugging due to kernel taint
 BUG: unable to handle kernel paging request at 00000000ffe48400
 IP: __put_v4l2_format32+0x98/0x4d0 [videodev]
 PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067
 Oops: 0001 [#1] SMP KASAN
 Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf
  drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel
 CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G    B            4.16.0-rc4+ #108
 Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev]
 RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2
 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297
 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948
 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0
 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8
 FS:  0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980
 CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0
 Call Trace:
  v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
  ? __fsnotify_inode_delete+0x20/0x20
  ? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
  compat_SyS_ioctl+0x646/0x14d0
  ? do_ioctl+0x30/0x30
  do_fast_syscall_32+0x191/0x3f4
  entry_SYSENTER_compat+0x6b/0x7a
 Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc
 RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30
 CR2: 00000000ffe48400

cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.94

Revert "xhci: plat: Register shutdown for xhci_plat"

Pixel 2 field testers reported that when they tried to reboot their
phones with some USB devices plugged in, the reboot would get wedged and
eventually trigger watchdog reset.  Once the Pixel kernel team found a
reliable repro case, they narrowed it down to this commit's 4.4.y
backport.  Reverting the change made the issue go away.

This reverts commit b07c12517f2aed0add8ce18146bb426b14099392.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: Fix use after free and double free in vrf_finish_output

commit 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a upstream.

Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.

Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.

Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ backport to 4.4 and 4.9 dropped the sock_confirm_neigh and
  changed neigh_output to dst_neigh_output ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net sched actions: fix dumping which requires several messages to user space

[ Upstream commit 734549eb550c0c720bc89e50501f1b1e98cdd841 ]

Fixes a bug in the tcf_dump_walker function that can cause some actions
to not be reported when dumping a large number of actions. This issue
became more aggrevated when cookies feature was added. In particular
this issue is manifest when large cookie values are assigned to the
actions and when enough actions are created that the resulting table
must be dumped in multiple batches.

The number of actions returned in each batch is limited by the total
number of actions and the memory buffer size.  With small cookies
the numeric limit is reached before the buffer size limit, which avoids
the code path triggering this bug. When large cookies are used buffer
fills before the numeric limit, and the erroneous code path is hit.

For example after creating 32 csum actions with the cookie
aaaabbbbccccdddd

$ tc actions ls action csum
total acts 26

    action order 0: csum (tcp) action continue
    index 1 ref 1 bind 0
    cookie aaaabbbbccccdddd

    .....

    action order 25: csum (tcp) action continue
    index 26 ref 1 bind 0
    cookie aaaabbbbccccdddd
total acts 6

    action order 0: csum (tcp) action continue
    index 28 ref 1 bind 0
    cookie aaaabbbbccccdddd

    ......

    action order 5: csum (tcp) action continue
    index 32 ref 1 bind 0
    cookie aaaabbbbccccdddd

Note that the action with index 27 is omitted from the report.

Fixes: 4b3550ef530c ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")"
Signed-off-by: Craig Dillabaugh <cdillaba@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

strparser: Fix sign of err codes

[ Upstream commit cd00edc179863848abab5cc5683de5b7b5f70954 ]

strp_parser_err is called with a negative code everywhere, which then
calls abort_parser with a negative code.  strp_msg_timeout calls
abort_parser directly with a positive code.  Negate ETIMEDOUT
to match signed-ness of other calls.

The default abort_parser callback, strp_abort_strp, sets
sk->sk_err to err.  Also negate the error here so sk_err always
holds a positive value, as the rest of the net code expects.  Currently
a negative sk_err can result in endless loops, or user code that
thinks it actually sent/received err bytes.

Found while testing net/tls_sw recv path.

Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix memory leak while delete slave's resources

[ Upstream commit 461d5f1b59490ce0096dfda45e10038c122a7892 ]

mlx4_delete_all_resources_for_slave in resource tracker should free all
memory allocated for a slave.
While releasing memory of fs_rule, it misses releasing memory of
fs_rule->mirr_mbox.

Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost_net: add missing lock nesting notation

[ Upstream commit aaa3149bbee9ba9b4e6f0bd6e3e7d191edeae942 ]

We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len()
after RX virtqueue mutex is held in handle_rx(). This requires an
appropriate lock nesting notation to calm down deadlock detector.

Fixes: 0308813724606 ("vhost_net: basic polling support")
Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: move dev_mc_sync after master_upper_dev_link in team_port_add

[ Upstream commit 982cf3b3999d39a2eaca0a65542df33c19b5d814 ]

The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link
in bond_enslave' is needed for team driver.

The panic can be reproduced easily:

  ip link add team1 type team
  ip link set team1 up
  ip link add link team1 vlan1 type vlan id 80
  ip link set vlan1 master team1

Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

route: check sysctl_fib_multipath_use_neigh earlier than hash

[ Upstream commit 6174a30df1b902e1fedbd728f5343937e83e64e6 ]

Prior to this patch, when one packet is hashed into path [1]
(hash <= nh_upper_bound) and it's neigh is dead, it will try
path [2]. However, if path [2]'s neigh is alive but it's
hash > nh_upper_bound, it will not return this alive path.
This packet will never be sent even if path [2] is alive.

 3.3.3.1/24:
  nexthop via 1.1.1.254 dev eth1 weight 1 <--[1] (dead neigh)
  nexthop via 2.2.2.254 dev eth2 weight 1 <--[2]

With sysctl_fib_multipath_use_neigh set is supposed to find an
available path respecting to the l3/l4 hash. But if there is
no available route with this hash, it should at least return
an alive route even with other hash.

This patch is to fix it by processing fib_multipath_use_neigh
earlier than the hash check, so that it will at least return
an alive route if there is when fib_multipath_use_neigh is
enabled. It's also compatible with before when there are alive
routes with the l3/l4 hash.

Fixes: a6db4494d218 ("net: ipv4: Consider failed nexthops in multipath routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: validate log when IOTLB is enabled

[ Upstream commit d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ]

Vq log_base is the userspace address of bitmap which has nothing to do
with IOTLB. So it needs to be validated unconditionally otherwise we
may try use 0 as log_base which may lead to pin pages that will lead
unexpected result (e.g trigger BUG_ON() in set_bit_to_user()).

Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: Fix mixed PFC and Global pause user control requests

[ Upstream commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 ]

Global pause and PFC configuration should be mutually exclusive (i.e. only
one of them at most can be set). However, once PFC was turned off,
driver automatically turned Global pause on. This is a bug.

Fix the driver behaviour to turn off PFC/Global once the user turned the
other on.

This also fixed a weird behaviour that at a current time, the profile
had both PFC and global pause configuration turned on, which is
Hardware-wise impossible and caused returning false positive indication
to query tools.

In addition, fix error code when setting global pause or PFC to change
metadata only upon successful change.

Also, removed useless debug print.

Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: fix NULL dereference on the error path of tcf_skbmod_init()

[ Upstream commit 2d433610176d6569e8b3a28f67bc72235bf69efc ]

when the following command

 # tc action replace action skbmod swap mac index 100

is run for the first time, and tcf_skbmod_init() fails to allocate struct
tcf_skbmod_params, tcf_skbmod_cleanup() calls kfree_rcu(NULL), thus
causing the following error:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: __call_rcu+0x23/0x2b0
 PGD 8000000034057067 P4D 8000000034057067 PUD 74937067 PMD 0
 Oops: 0002 [#1] SMP PTI
 Modules linked in: act_skbmod(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache jbd2 crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep pcbc snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd glue_helper snd cryptd virtio_balloon joydev soundcore pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_net virtio_blk ata_piix libata crc32c_intel virtio_pci serio_raw virtio_ring virtio i2c_core floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_skbmod]
 CPU: 3 PID: 3144 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:__call_rcu+0x23/0x2b0
 RSP: 0018:ffffbd2e403e7798 EFLAGS: 00010246
 RAX: ffffffffc0872080 RBX: ffff981d34bff780 RCX: 00000000ffffffff
 RDX: ffffffff922a5f00 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000021f
 R10: 000000003d003000 R11: 0000000000aaaaaa R12: 0000000000000000
 R13: ffffffff922a5f00 R14: 0000000000000001 R15: ffff981d3b698c2c
 FS:  00007f3678292740(0000) GS:ffff981d3fd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 000000007c57a006 CR4: 00000000001606e0
 Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_skbmod_init+0x1d1/0x210 [act_skbmod]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7f36776a3ba0
 RSP: 002b:00007fff4703b618 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fff4703b740 RCX: 00007f36776a3ba0
 RDX: 0000000000000000 RSI: 00007fff4703b690 RDI: 0000000000000003
 RBP: 000000005aaaba36 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fff4703b0a0 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fff4703b754 R14: 0000000000000001 R15: 0000000000669f60
 Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
 RIP: __call_rcu+0x23/0x2b0 RSP: ffffbd2e403e7798
 CR2: 0000000000000008

Fix it in tcf_skbmod_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.

Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: fix NULL dereference in the error path of tunnel_key_init()

[ Upstream commit abdadd3cfd3e7ea3da61ac774f84777d1f702058 ]

when the following command

 # tc action add action tunnel_key unset index 100

is run for the first time, and tunnel_key_init() fails to allocate struct
tcf_tunnel_key_params, tunnel_key_release() dereferences NULL pointers.
This causes the following error:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
 IP: tunnel_key_release+0xd/0x40 [act_tunnel_key]
 PGD 8000000033787067 P4D 8000000033787067 PUD 74646067 PMD 0
 Oops: 0000 [#1] SMP PTI
 Modules linked in: act_tunnel_key(E) act_csum ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel pcbc snd_hda_codec snd_hda_core snd_hwdep snd_seq aesni_intel snd_seq_device crypto_simd glue_helper snd_pcm cryptd joydev snd_timer pcspkr virtio_balloon snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk drm virtio_console crc32c_intel ata_piix serio_raw i2c_core virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CPU: 2 PID: 3101 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tunnel_key_release+0xd/0x40 [act_tunnel_key]
 RSP: 0018:ffffba46803b7768 EFLAGS: 00010286
 RAX: ffffffffc09010a0 RBX: 0000000000000000 RCX: 0000000000000024
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99ee336d7480
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
 R10: 0000000000000220 R11: ffff99ee79d73131 R12: 0000000000000000
 R13: ffff99ee32d67610 R14: ffff99ee7671dc38 R15: 00000000fffffff4
 FS:  00007febcb2cd740(0000) GS:ffff99ee7fd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000010 CR3: 000000007c8e4005 CR4: 00000000001606e0
 Call Trace:
  __tcf_idr_release+0x79/0xf0
  tunnel_key_init+0xd9/0x460 [act_tunnel_key]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7febca6deba0
 RSP: 002b:00007ffe7b0dd128 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007ffe7b0dd250 RCX: 00007febca6deba0
 RDX: 0000000000000000 RSI: 00007ffe7b0dd1a0 RDI: 0000000000000003
 RBP: 000000005aaa90cb R08: 0000000000000002 R09: 0000000000000000
 R10: 00007ffe7b0dcba0 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007ffe7b0dd264 R14: 0000000000000001 R15: 0000000000669f60
 Code: 44 00 00 8b 0d b5 23 00 00 48 8b 87 48 10 00 00 48 8b 3c c8 e9 a5 e5 d8 c3 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 9f b0 00 00 00 <83> 7b 10 01 74 0b 48 89 df 31 f6 5b e9 f2 fa 7f c3 48 8b 7b 18
 RIP: tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: ffffba46803b7768
 CR2: 0000000000000010

Fix this in tunnel_key_release(), ensuring 'param' is not NULL before
dereferencing it.

Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Sync netdev vxlan ports at open

[ Upstream commit a117f73dc2430443f23e18367fa545981129c1a6 ]

When mlx5_core is loaded it is expected to sync ports
with all vxlan devices so it can support vxlan encap/decap.
This is done via udp_tunnel_get_rx_info(). Currently this
call is set in mlx5e_nic_enable() and if the netdev is not in
NETREG_REGISTERED state it will not be called.

Normally on load the netdev state is not NETREG_REGISTERED
so udp_tunnel_get_rx_info() will not be called.

Moving udp_tunnel_get_rx_info() to mlx5e_open() so
it will be called on netdev UP event and allow encap/decap.

Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered")
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: better validate user provided tunnel names

[ Upstream commit 537b361fbcbcc3cd6fe2bb47069fd292b9256d16 ]

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: better validate user provided tunnel names

[ Upstream commit db7a65e3ab78e5b1c4b17c0870ebee35a4ee3257 ]

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: better validate user provided tunnel names

[ Upstream commit 5f42df013b8bc1b6511af7a04bf93b014884ae2a ]

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466

CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
 ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: sit: better validate user provided tunnel names

[ Upstream commit b95211e066fc3494b7c115060b2297b4ba21f025 ]

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453

CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: better validate user provided tunnel names

[ Upstream commit 9cb726a212a82c88c98aa9f0037fd04777cd8fe5 ]

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
Write of size 20 at addr ffff8801ac79f810 by task syzkaller268107/4482

CPU: 0 PID: 4482 Comm: syzkaller268107 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
 ip_tunnel_create net/ipv4/ip_tunnel.c:352 [inline]
 ip_tunnel_ioctl+0x818/0xd40 net/ipv4/ip_tunnel.c:861
 ipip_tunnel_ioctl+0x1c5/0x420 net/ipv4/ipip.c:350
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fool proof dev_valid_name()

[ Upstream commit a9d48205d0aedda021fc3728972a9e9934c2b9de ]

We want to use dev_valid_name() to validate tunnel names,
so better use strnlen(name, IFNAMSIZ) than strlen(name) to make
sure to not upset KASAN.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: process the err returned by dev_set_allmulti properly in bond_enslave

[ Upstream commit 9f5a90c107741b864398f4ac0014711a8c1d8474 ]

When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.

Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave

[ Upstream commit ae42cc62a9f07f1f6979054ed92606b9c30f4a2e ]

Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:

  ip link add bond1 type bond
  ip link set bond1 up
  ip link add link bond1 vlan1 type vlan id 80
  ip link set vlan1 master bond1

The call trace is as below:

  [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
  [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
  [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
  [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
  [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
  [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
  [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
  [<ffffffffa8401909>] do_setlink+0x9c9/0xe50
  [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
  [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
  [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
  [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
  [<ffffffffa8424850>] netlink_unicast+0x170/0x210
  [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
  [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0

This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.

This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.

Note team driver also has this issue, I will fix it in another patch.

Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix the err path for dev hwaddr sync in bond_enslave

[ Upstream commit 5c78f6bfae2b10ff70e21d343e64584ea6280c26 ]

vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.

Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vlan: also check phy_driver ts_info for vlan's real device

[ Upstream commit ec1d8ccb07deaf30fd0508af6755364ac47dc08d ]

Just like function ethtool_get_ts_info(), we should also consider the
phy_driver ts_info call back. For example, driver dp83640.

Fixes: 37dd9255b2f6 ("vlan: Pass ethtool get_ts_info queries to real device.")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: correctly remove wait queue during poll failure

[ Upstream commit dc6455a71c7fc5117977e197f67f71b49f27baba ]

We tried to remove vq poll from wait queue, but do not check whether
or not it was in a list before. This will lead double free. Fixing
this by switching to use vhost_poll_stop() which zeros poll->wqh after
removing poll from waitqueue to make sure it won't be freed twice.

Cc: Darren Kenny <darren.kenny@oracle.com>
Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com
Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sky2: Increase D3 delay to sky2 stops working after suspend

[ Upstream commit afb133637071be6deeb8b3d0e55593ffbf63c527 ]

The sky2 ethernet stops working after system resume from suspend:
[ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3

The current 150ms delay is not enough, change it to 200ms can solve the
issue.

BugLink: https://bugs.launchpad.net/bugs/1758507
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6

[ Upstream commit 81e98370293afcb58340ce8bd71af7b97f925c26 ]

Check must happen before call to ipv6_addr_v4mapped()

syzbot report was :

BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline]
BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 sctp_sockaddr_af net/sctp/socket.c:359 [inline]
 sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
 sctp_bind+0x149/0x190 net/sctp/socket.c:332
 inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293
 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
 SyS_bind+0x54/0x80 net/socket.c:1460
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fd49
RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670
R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000

Local variable description: ----address@SYSC_bind
Variable was created at:
 SYSC_bind+0x6f/0x4b0 net/socket.c:1461
 SyS_bind+0x54/0x80 net/socket.c:1460

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: do not leak kernel memory to user space

[ Upstream commit 6780db244d6b1537d139dea0ec8aad10cf9e4adb ]

syzbot produced a nice report [1]

Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory
to user space, because sin_zero (padding field) was not properly cleared.

[1]
BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227
CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
 copy_to_user include/linux/uaccess.h:184 [inline]
 move_addr_to_user+0x32e/0x530 net/socket.c:227
 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4401c9
RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0
R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
 ___sys_recvmsg+0xd5/0x810 net/socket.c:2172
 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313

Bytes 8-15 of 16 are uninitialized

==================================================================
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G    B            4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 panic+0x39d/0x940 kernel/panic.c:183
 kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083
 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
 copy_to_user include/linux/uaccess.h:184 [inline]
 move_addr_to_user+0x32e/0x530 net/socket.c:227
 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix setting driver_data after register_netdev

[ Upstream commit 19c9ea363a244f85f90a424f9936e6d56449e33c ]

pci_set_drvdata() is called only after registering the net_device,
therefore we could run into a NPE if one of the functions using
driver_data is called before it's set.

Fix this by calling pci_set_drvdata() before registering the
net_device.

This fix is a candidate for stable. As far as I can see the
bug has been there in kernel version 3.2 already, therefore
I can't provide a reference which commit is fixed by it.

The fix may need small adjustments per kernel version because
due to other changes the label which is jumped to if
register_netdev() fails has changed over time.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pptp: remove a buggy dst release in pptp_connect()

[ Upstream commit bfacfb457b36911a10140b8cb3ce76a74883ac5a ]

Once dst has been cached in socket via sk_setup_caps(),
it is illegal to call ip_rt_put() (or dst_release()),
since sk_setup_caps() did not change dst refcount.

We can still dereference it since we hold socket lock.

Caugth by syzbot :

BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185
Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088

CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1a7/0x27d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
 atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
 dst_release+0x27/0xa0 net/core/dst.c:185
 sk_dst_set include/net/sock.h:1812 [inline]
 sk_dst_reset include/net/sock.h:1824 [inline]
 sock_setbindtodevice net/core/sock.c:610 [inline]
 sock_setsockopt+0x431/0x1b20 net/core/sock.c:707
 SYSC_setsockopt net/socket.c:1845 [inline]
 SyS_setsockopt+0x2ff/0x360 net/socket.c:1828
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4552d9
RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9
RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000
R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000

Allocated by task 20088:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542
 dst_alloc+0x11f/0x1a0 net/core/dst.c:104
 rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520
 __mkroute_output net/ipv4/route.c:2265 [inline]
 ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493
 ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322
 __ip_route_output_key include/net/route.h:126 [inline]
 ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577
 ip_route_output_ports include/net/route.h:163 [inline]
 pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453
 SYSC_connect+0x213/0x4a0 net/socket.c:1639
 SyS_connect+0x24/0x30 net/socket.c:1620
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Freed by task 20082:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527
 __cache_free mm/slab.c:3486 [inline]
 kmem_cache_free+0x83/0x2a0 mm/slab.c:3744
 dst_destroy+0x266/0x380 net/core/dst.c:140
 dst_destroy_rcu+0x16/0x20 net/core/dst.c:153
 __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
 rcu_do_batch kernel/rcu/tree.c:2675 [inline]
 invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline]
 __rcu_process_callbacks kernel/rcu/tree.c:2897 [inline]
 rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285

The buggy address belongs to the object at ffff8801c54dc000
 which belongs to the cache ip_dst_cache of size 168
The buggy address is located 64 bytes inside of
 168-byte region [ffff8801c54dc000, ffff8801c54dc0a8)
The buggy address belongs to the page:
page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010
raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000
page dumped because: kasan: bad access detected

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: fix NULL dereference in the error path of tcf_bpf_init()

[ Upstream commit 3239534a79ee6f20cffd974173a1e62e0730e8ac ]

when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid
number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or
bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes
the following error:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
 PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0
 Oops: 0000 [#1] SMP PTI
 Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
 CPU: 3 PID: 5654 Comm: tc Tainted: G            E    4.16.0.bpf_test+ #408
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:__bpf_prog_put+0xc/0xc0
 RSP: 0018:ffff9594003ef728 EFLAGS: 00010202
 RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
 R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000
 R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054
 FS:  00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0
 Call Trace:
  tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf]
  tcf_bpf_cleanup+0x4c/0x70 [act_bpf]
  __tcf_idr_release+0x79/0x140
  tcf_bpf_init+0x125/0x330 [act_bpf]
  tcf_action_init_1+0x2cc/0x430
  ? get_page_from_freelist+0x3f0/0x11b0
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.29+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? mem_cgroup_commit_charge+0x80/0x130
  ? page_add_new_anon_rmap+0x73/0xc0
  ? do_anonymous_page+0x2a2/0x560
  ? __handle_mm_fault+0xc75/0xe20
  __sys_sendmsg+0x58/0xa0
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7fcb2e58eba0
 RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0
 RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003
 RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0
 Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00
 RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728
 CR2: 0000000000000020

Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f)
is called only when f is not NULL.

Fixes: bbc09e7842a5 ("net/sched: fix idr leak on the error path of tcf_bpf_init()")
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: make sure nladdr has correct size in netlink_connect()

[ Upstream commit 7880287981b60a6808f39f297bb66936e8bdf57a ]

KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.

Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: Increment OUTxxx counters after netfilter hook

[ Upstream commit 71a1c915238c970cd9bdd5bf158b1279d6b6d55b ]

At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and
IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call
for NFPROTO_IPV6 / NF_INET_FORWARD.  As a result, these counters get
incremented regardless of whether or not the netfilter hook allows the
packet to continue being processed.  This change increments the counters
in ip6_forward_finish() so that it will not happen if the netfilter hook
chooses to terminate the packet, which is similar to how IPv4 works.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: Fix route leaking between VRFs

[ Upstream commit b6cdbc85234b072340b8923e69f49ec293f905dc ]

Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.

ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.

The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.

Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix possible out-of-bound read in skb_network_protocol()

[ Upstream commit 1dfe82ebd7d8fd43dba9948fdfb31f145014baa0 ]

skb mac header is not necessarily set at the time skb_network_protocol()
is called. Use skb->data instead.

BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242

CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443
 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
 harmonize_features net/core/dev.c:2924 [inline]
 netif_skb_features+0x509/0x9b0 net/core/dev.c:3011
 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142
 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256
 packet_snd net/packet/af_packet.c:2944 [inline]
 packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:639
 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
 __sys_sendmsg+0xe5/0x210 net/socket.c:2081

Fixes: 19acc327258a ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: the entire IPv6 header chain must fit the first fragment

[ Upstream commit 10b8a3de603df7b96004179b1b33b1708c76d144 ]

While building ipv6 datagram we currently allow arbitrary large
extheaders, even beyond pmtu size. The syzbot has found a way
to exploit the above to trigger the following splat:

kernel BUG at ./include/linux/skbuff.h:2073!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline]
RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636
RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293
RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18
RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000
R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6
R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0
FS:  0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6_finish_skb include/net/ipv6.h:969 [inline]
  udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073
  udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343
  inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046
  __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136
  SYSC_sendmmsg net/socket.c:2167 [inline]
  SyS_sendmmsg+0x35/0x60 net/socket.c:2162
  do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4404c9
RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9
RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0
R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000
Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29
5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d
87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe
RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0
RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP:
ffff8801bc18f0f0

As stated by RFC 7112 section 5:

   When a host fragments an IPv6 datagram, it MUST include the entire
   IPv6 Header Chain in the First Fragment.

So this patch addresses the issue dropping datagrams with excessive
extheader length. It also updates the error path to report to the
calling socket nonnegative pmtu values.

The issue apparently predates git history.

v1 -> v2: cleanup error path, as per Eric's suggestion

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arp: fix arp_filter on l3slave devices

[ Upstream commit 58b35f27689b5eb514fc293c332966c226b1b6e4 ]

arp_filter performs an ip_route_output search for arp source address and
checks if output device is the same where the arp request was received,
if it is not, the arp request is not answered.

This route lookup is always done on main route table so l3slave devices
never find the proper route and arp is not answered.

Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the
lookup for l3slave devices while maintaining same behavior for non
l3slave devices as this function returns 0 in that case.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: at91: fix clk-generated compilation

commit 4a5f06a01cfd1f7a9141bdb760bf5b68cca7f224 upstream.

Fix missing }

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: use lockless method of accessing and updating f->reg_idx

commit 92e75428ffc90e2a0321062379f883f3671cfebe upstream.

Linus pointed out that there is a much more efficient way of avoiding
the problem that we were trying to address in commit 9dfa7bba35ac0:
"fix race in drivers/char/random.c:get_reg()".

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_net: check return value of skb_to_sgvec in one more location

Kernels that do not have f6b10209b90d ("virtio-net: switch to use
build_skb() for small buffer") will have an extra call to skb_to_sgvec
that is not handled by e2fcad58fd23 ("virtio_net: check return value of
skb_to_sgvec always"). Since the former does not appear to be stable
material, just fix the call up directly.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_net: check return value of skb_to_sgvec always

commit e2fcad58fd230f635a74e4e983c6f4ea893642d2 upstream.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: check return value of skb_to_sgvec always

commit 89a5ea99662505d2d61f2a3030a6896c2cb3cdb0 upstream.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipsec: check return value of skb_to_sgvec always

commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 upstream.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
[natechancellor: Adjusted context due to lack of fca11ebde3f0]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix copyfile_offset update of output offset

[ Upstream commit fa1195ccc0af2d121abe0fe266a1caee8c265eea ]

We need to increase output offset in each iteration, not decrease it as
we currently do.

I guess we were lucky to finish in most cases in first iteration, so the
bug never showed. However it shows a lot when working with big (~4GB)
size data.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 9c9f5a2f1944 ("perf tools: Introduce copyfile_offset() function")
Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: mtd_oobtest: Handle bitflips during reads

[ Upstream commit 12663b442e5ac5aa3d6097cd3f287c71ba46d26e ]

Reads from NAND devices usually trigger bitflips, this is an expected
behavior. While bitflips are under a given threshold, the MTD core
returns 0. However, when the number of corrected bitflips is above this
same threshold, -EUCLEAN is returned to inform the upper layer that this
block is slightly dying and soon the ECC engine will be overtaken so
actions should be taken to move the data out of it.

This particular condition should not be treated like an error and the
test should continue.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - disable IRQs while suspended

[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ]

We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).

So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().

This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.

This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.

BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: Advertise 2.0v supply on SDIO host controller

[ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ]

On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO,
requires 2.0v, while the host, according to Intel Merrifield TRM,
supports 1.8v supply only.

The card announces itself as

  mmc2: new ultra high speed DDR50 SDIO card at address 0001

Introduce a custom OCR mask for SDIO host controller on Intel Merrifield
and add a special case to sdhci_set_power_noreg() to override 2.0v supply
by enforcing 1.8v power choice.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages

[ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ]

We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and
the extant logic would flag that as an error. This was already fixed in
cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in
t4_sge_init_soft() when our Page Size is 64KB".

Original Work by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, mv64x60: Fix an error handling path

[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ]

We should not call edac_mc_del_mc() if a corresponding call to
edac_mc_add_mc() has not been performed yet.

So here, we should go to err instead of err2 to branch at the right
place of the error handling path.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: Allow ADM response in addition to UA for control dlci

[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ]

Some devices have the control dlci stay in ADM mode instead of the UA
mode. This can seen at least on droid 4 when trying to open the ts
27.010 mux port. Enabling n_gsm debug mode shows the control dlci
always respond with DM to SABM instead of UA:

# modprobe n_gsm debug=0xff
# ldattach -d GSM0710 /dev/ttyS0 &
gsmld_output: 00000000: f9 03 3f 01 1c f9
--> 0) C: SABM(P)
gsmld_receive: 00000000: f9 03 1f 01 36 f9
<-- 0) C: DM(P)
...
$ minicom -D /dev/gsmtty1
minicom: cannot open /dev/gsmtty1: No error information
$ strace minicom -D /dev/gsmtty1
...
open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT

Note that this is different issue from other n_gsm -EL2HLT issues such
as timeouts when the control dlci does not respond at all.

The ADM mode seems to be a quite common according to "RF Wireless World"
article "GSM Issue-UE sends SABM and gets a DM response instead of
UA response":

  This issue is most commonly observed in GSM networks where in UE sends
  SABM and expects network to send UA response but it ends up receiving
  DM response from the network. SABM stands for Set asynchronous balanced
  mode, UA stands for Unnumbered Acknowledge and DA stands for
  Disconnected Mode.

  An RLP entity can be in one of two modes:
  - Asynchronous Balanced Mode (ABM)
  - Asynchronous Disconnected Mode (ADM)

Currently Linux kernel closes the control dlci after several retries
in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce
error code -EL2HLT when trying to open them as the closing of control
dlci has already set gsm->dead.

Let's fix the issue by allowing control dlci stay in ADM mode after the
retries so the /dev/gsmtty ports can be opened and used. It seems that
it might take several attempts to get any response from the control
dlci, so it's best to allow ADM mode only after the SABM retries are
done.

Note that for droid 4 additional patches are needed to mux the ttyS0
pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also
needed to use n_gsm. And the mdm6600 modem needs to be powered on.

Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: fix kernel oops in blk_mq_tag_idle()

[ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ]

HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(),
then we need to check it before calling blk_mq_tag_idle(), otherwise
the following kernel oops can be triggered, so fix it by checking if
the hw queue is unmapped since it doesn't make sense to idle the tags
any more after hw queues are unmapped.

[  440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma]
[  440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000
[  440.788359] RIP: 0010:[<ffffffffb730e2b4>]  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  440.798697] RSP: 0018:ffff893bf9bcbd10  EFLAGS: 00010286
[  440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f
[  440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00
[  440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000
[  440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008
[  440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080
[  440.849988] FS:  0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000
[  440.859955] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0
[  440.876169] Call Trace:
[  440.879818]  [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0
[  440.887051]  [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160
[  440.894465]  [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150
[  440.901881]  [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core]
[  440.910068]  [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core]
[  440.919026]  [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma]
[  440.928079]  [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma]
[  440.937126]  [<ffffffffb70ab58a>] process_one_work+0x17a/0x440
[  440.944517]  [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0
[  440.951607]  [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0
[  440.959760]  [<ffffffffb70b352f>] kthread+0xcf/0xe0
[  440.966055]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.973715]  [<ffffffffb76d8658>] ret_from_fork+0x58/0x90
[  440.980586]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f
[  441.011620] RIP  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  441.019301]  RSP <ffff893bf9bcbd10>
[  441.024052] CR2: 0000000000000008

Reported-by: Zhang Yi <yizhan@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: initialize sas_phy status according to response of DISCOVER

[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ]

The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.

In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.

Signed-off-by: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: fix error when getting phy events

[ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ]

The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:

~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0

Obviously we should goto error handler if smp_execute_task() returns
non-zero.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: fix memory leak in sas_smp_get_phy_events()

[ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ]

We've got a memory leak with the following producer:

while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done

The buffer req is allocated and not freed after we return. Fix it.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: segregate flash only volume write streams

[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ]

In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |

So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.

In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.

Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.

[mlyle: fixed commit log formatting, permissions, line endings]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: stop writeback thread after detaching

[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ]

Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo  ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.

Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.

[edit by mlyle: commit log spelling/formatting]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path

[ Upstream commit d0b1d259a4b58b21a21ea82d7174bf7ea825e9cc ]

If one 'drm_gem_handle_create()' fails, we leak somes handles and some
memory.

In order to fix it:
  - move the 'free(bo_state)' at the end of the function so that it is also
    called in the eror handling path. This has the side effect to also try
    to free it if the first 'kcalloc' fails. This is harmless.
  - add a new label, err_delete_handle, in order to delete already
    allocated handles in error handling path
  - remove the now useless 'err' label

The way the code is now written will also delete the handles if the
'copy_to_user()' call fails.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: kselftest_harness: Fix compile warning

[ Upstream commit 34a048cc06802556e5f96f325dc32cc2f6a11225 ]

Do not confuse the compiler with a semicolon preceding a block. Replace
the semicolon with an empty block to avoid a warning:

  gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf
  In file included from seccomp_bpf.c:40:0:
  seccomp_bpf.c: In function ‘change_syscall’:
  ../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
    for (; _metadata->trigger;  _metadata->trigger = __bail(_assert))
    ^
  ../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’
   } while (0); OPTIONAL_HANDLER(_assert)
                ^~~~~~~~~~~~~~~~
  ../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’
    __EXPECT(expected, seen, ==, 0)
    ^~~~~~~~
  seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’
    EXPECT_EQ(0, ret);
    ^~~~~~~~~
  seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
    {
    ^

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hsr: fix incorrect warning

[ Upstream commit 675c8da049fd6556eb2d6cdd745fe812752f07a8 ]

When HSR interface is setup using ip link command, an annoying warning
appears with the trace as below:-

[  203.019828] hsr_get_node: Non-HSR frame
[  203.019833] Modules linked in:
[  203.019848] CPU: 0 PID: 158 Comm: sd-resolve Tainted: G        W       4.12.0-rc3-00052-g9fa6bf70 #2
[  203.019853] Hardware name: Generic DRA74X (Flattened Device Tree)
[  203.019869] [<c0110280>] (unwind_backtrace) from [<c010c2f4>] (show_stack+0x10/0x14)
[  203.019880] [<c010c2f4>] (show_stack) from [<c04b9f64>] (dump_stack+0xac/0xe0)
[  203.019894] [<c04b9f64>] (dump_stack) from [<c01374e8>] (__warn+0xd8/0x104)
[  203.019907] [<c01374e8>] (__warn) from [<c0137548>] (warn_slowpath_fmt+0x34/0x44)
root@am57xx-evm:~# [  203.019921] [<c0137548>] (warn_slowpath_fmt) from [<c081126c>] (hsr_get_node+0x148/0x170)
[  203.019932] [<c081126c>] (hsr_get_node) from [<c0814240>] (hsr_forward_skb+0x110/0x7c0)
[  203.019942] [<c0814240>] (hsr_forward_skb) from [<c0811d64>] (hsr_dev_xmit+0x2c/0x34)
[  203.019954] [<c0811d64>] (hsr_dev_xmit) from [<c06c0828>] (dev_hard_start_xmit+0xc4/0x3bc)
[  203.019963] [<c06c0828>] (dev_hard_start_xmit) from [<c06c13d8>] (__dev_queue_xmit+0x7c4/0x98c)
[  203.019974] [<c06c13d8>] (__dev_queue_xmit) from [<c0782f54>] (ip6_finish_output2+0x330/0xc1c)
[  203.019983] [<c0782f54>] (ip6_finish_output2) from [<c0788f0c>] (ip6_output+0x58/0x454)
[  203.019994] [<c0788f0c>] (ip6_output) from [<c07b16cc>] (mld_sendpack+0x420/0x744)

As this is an expected path to hsr_get_node() with frame coming from
the master interface, add a check to ensure packet is not from the
master port and then warn.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: dont migrate permanent fdb entries during learn

[ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ]

This patch fixes vxlan_snoop to not move permanent fdb entries
on learn events. This is consistent with the bridge fdb
handling of permanent entries.

Fixes: 26a41ae60438 ("vxlan: only migrate dynamic FDB entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix hanging safe offline

[ Upstream commit e8ac01555d9e464249e8bb122337d6d6e5589ccc ]

The safe offline processing may hang forever because it waits for I/O
which can not be started because of the offline flag that prevents new
I/O from being started.

Allow I/O to be started during safe offline processing because in this
special case we take care that the queues are empty before throwing away
the device.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Disassembler: Abort on an invalid/unknown AML opcode

[ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ]

ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb

An invalid opcode indicates something seriously wrong with the
input AML file. The AML parser is immediately confused and lost,
causing the resulting parse tree to be ill-formed. The actual
disassembly can then cause numerous unrelated errors and faults.

This change aborts the disassembly upon discovery of such an
opcode during the AML parse phase.

Link: https://github.com/acpica/acpica/commit/ed0389cb
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Events: Add runtime stub support for event APIs

[ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ]

ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce

It is reported that on Linux, RTC driver complains wrong errors on
hardware reduced platform:
  [    4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654)

This patch fixes this by correctly adding runtime reduced hardware check.
Reported by Chandan Tagore, fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/99bc3bec
Tested-by: Chandan Tagore <tagore.chandan@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: OSL: Add support to exclude stdarg.h

[ Upstream commit 84676b87b27d8aefafb9f712a5b444938f284513 ]

ACPICA commit e2df7455a9a4301b03668e4c9c02c7a564cc841c

Some hosts may choose not to include stdarg.h, implementing a
configurability in acgcc.h, allowing OSen like Solaris to exclude stdarg.h.
This patch also fixes acintel.h accordingly without providing builtin
support as Intel compiler is similar as GCC. Reported by Dana Myers, fixed
by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/e2df7455
Reported-by: Dana Myers <dana.myers@oracle.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: dt: Add missing 'of_node_put()'

[ Upstream commit b2cdd8e1b54849477a32d820acc2e87828a38f3d ]

'of_node_put()' should be called on pointer returned by
'of_parse_phandle()' when done. In this function this is done in all path
except this 'continue', so add it.

Fixes: 97735da074fd (drivers: cpuidle: Add status property to ARM idle states)
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Send HCI Set Event Mask Page 2 command only when needed

[ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ]

The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices
report support for the Set Event Mask Page 2 command, but actually do
return an error when trying to use it.

  < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
  > HCI Event: Command Complete (0x0e) plen 68
       Read Local Supported Commands (0x04|0x0002) ncmd 1
         Status: Success (0x00)
         Commands: 162 entries
           ...
           Set Event Mask Page 2 (Octet 22 - Bit 2)
           ...

  < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8
         Mask: 0x0000000000000000
  > HCI Event: Command Complete (0x0e) plen 4
       Set Event Mask Page 2 (0x03|0x0063) ncmd 1
         Status: Unknown HCI Command (0x01)

Since these controllers do not support any feature that would require
the event mask page 2 to be modified, it is safe to not send this
command at all. The default value is all bits set to zero.

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a5c ProdID=21e6 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=F82FA8E8CFC0
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: meson: meson8b: add compatibles for Meson8 and Meson8m2

[ Upstream commit 855f06a1009faabb0c6a3e9b49d115496d325856 ]

The clock controller on Meson8, Meson8b and Meson8m2 is very similar
based on the code from the Amlogic GPL kernel sources. Add separate
compatibles for each SoC to make sure that we can easily implement
all the small differences for each SoC later on.

In general the Meson8 and Meson8m2 seem to be almost identical as they
even share the same mach-meson8 directory in Amlogic's GPL kernel
sources.
The main clocks on Meson8, Meson8b and Meson8m2 are very similar,
because they are all using the same PLL values, 90% of the clock gates
are the same (the actual diffstat of the mach-meson8/clock.c and
mach-meson8b/clock.c files is around 30 to 40 lines, when excluding
all commented out code).
The difference between the Meson8 and Meson8b clock gates seem to be:
- Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3,
  CSI_DIG_CLKIN gates which don't seem to be available on Meson8b
- the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead
  of "PERIPHS_TOP" (on Meson8b)
- Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or
  on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL
  kernel sources)
None of these gates is added for now, since it's unclear whether these
definitions are actually correct (the VCLK2_ENCT gate for example is
defined, but only used in some commented block).

The main difference between all three SoCs seem to be the video (VPU)
clocks. Apart from different supported clock rates (according to vpu.c
in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the
most notable difference is that Meson8m2 has a GP_PLL clock and a mux
(probably the same as on the Meson GX SoCs) to support glitch-free
(clock rate) switching.
None of these VPU clocks are not supported by our mainline meson8b
clock driver yet though.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: disable admin msix while working in polling mode

[ Upstream commit a2cc5198dac102775b21787752a2e0afe44ad311 ]

Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: add missing unmap bars on device removal

[ Upstream commit 0857d92f71b6cb75281fde913554b2d5436c394b ]

This patch also change the mapping functions to devm_ functions

Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>