xen/balloon: Mark unallocated host memory as UNUSABLE

[ Upstream commit b3cf8528bb21febb650a7ecbf080d0647be40b9f ]

Commit f5775e0b6116 ("x86/xen: discard RAM regions above the maximum
reservation") left host memory not assigned to dom0 as available for
memory hotplug.

Unfortunately this also meant that those regions could be used by
others. Specifically, commit fa564ad96366 ("x86/PCI: Enable a 64bit BAR
on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those
addresses as MMIO.

To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus
effectively reverting f5775e0b6116) and keep track of that region as
a hostmem resource that can be used for the hotplug.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: fixup ADG register mask

[ Upstream commit d5aa24825da5711f8cb829f873160ddf1a29b19c ]

BRGCKR should use 0x80770000, instead of 0x80FF0000.

R-Car Gen2 xxx_TIMSEL should use 0x0F1F,
R-Car Gen3 xxx_TIMSEL should use 0x1F1F.
Here, Gen3 doesn't support AVD, thus, both case can use 0x0F1F.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Stay in polling mode when command EQ destroy fails

[ Upstream commit a2fba188fd5eadd6061bef4f2f2577a43231ebf3 ]

During unload, on mlx5_stop_eqs we move command interface from events
mode to polling mode, but if command interface EQ destroy fail we move
back to events mode.
That's wrong since even if we fail to destroy command interface EQ, we
do release its irq, so no interrupts will be received.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Cleanup IRQs in case of unload failure

[ Upstream commit d6b2785cd55ee72e9608762650b3ef299f801b1b ]

When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error.
In such failure flow the function will return without
releasing all EQs irqs and then pci_free_irq_vectors will fail.
Fix by only warn on destroy EQ failure and continue to release other
EQs and their irqs.

It fixes the following kernel trace:
kernel: kernel BUG at drivers/pci/msi.c:352!
...
...
kernel: Call Trace:
kernel: pci_disable_msix+0xd3/0x100
kernel: pci_free_irq_vectors+0xe/0x20
kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core]

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix ETS BW check

[ Upstream commit ff0891915cd7b24ab27eee9b360c0452853bf9f6 ]

Fix bug that allows ets bw sum to be 0% when ets tc type exists.

Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fix bad RX timestamp extraction

[ Upstream commit a1762456993893795030d911106a7650481db0ef ]

As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found
in the context descriptor following the current descriptor. However the
current code looks for the context descriptor in the current
descriptor, which will always fail.

Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fix TX timestamp calculation

[ Upstream commit 200922c93f008e03ddc804c6dacdf26ca1ba86d7 ]

When using GMAC4 the value written in PTP_SSIR should be shifted however
the shifted value is also used in subsequent calculations which results
in a bad timestamp value.

Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: get the min mtu properly in ip6_tnl_xmit

[ Upstream commit c9fefa08190fc879fb2e681035d7774e0a8c5170 ]

Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but
IPV6_MIN_MTU actually only works when the inner packet is ipv6.

With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst
couldn't be set less than 1280. It would cause tx_err and the
packet to be dropped when the outer dst pmtu is close to 1280.

Jianlin found it by running ipv4 traffic with the topo:

  (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server)

After changing eth2 mtu to 1300, the performance became very
low, or the connection was even broken. The issue also affects
ip4ip6 and ip6ip6 tunnels.

So if the inner packet is ipv4, 576 should be considered as the
min mtu.

Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can
only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP.
This patch using 576 as the min mtu for non-ipv6 packet works
for all those cases.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: remove the incorrect mtu limit for ipgre tap

[ Upstream commit 2c52129a7d74d017320804c6928de770815c5f4a ]

The same fix as the patch "ip_gre: remove the incorrect mtu limit for
ipgre tap" is also needed for ip6_gre.

Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_gre: remove the incorrect mtu limit for ipgre tap

[ Upstream commit cfddd4c33c254954927942599d299b3865743146 ]

ipgre tap driver calls ether_setup(), after commit 61e84623ace3
("net: centralize net_device min/max MTU checking"), the range
of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.

It causes the dev mtu of the ipgre tap device to not be greater
than 1500, this limit value is not correct for ipgre tap device.

Besides, it's .change_mtu already does the right check. So this
patch is just to set max_mtu as 0, and leave the check to it's
.change_mtu.

Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: update skb dst pmtu on tx path

[ Upstream commit a93bf0ff449064e6b7f44e58522e940f88c0d966 ]

Unlike ip tunnels, now vxlan doesn't do any pmtu update for
upper dst pmtu, even if it doesn't match the lower dst pmtu
any more.

The problem can be reproduced when reducing the vxlan lower
dev's pmtu when running netperf. In jianlin's testing, the
performance went to 1/7 of the previous.

This patch is to update the upper dst pmtu to match the lower
dst pmtu on tx path so that packets can be sent out even when
lower dev's pmtu has been changed.

It also works for metadata dst.

Note that this patch doesn't process any pmtu icmp packet.
But even in the future, the support for pmtu icmp packets
process of udp tunnels will also needs this.

The same thing will be done for geneve in another patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: arc_emac: fix arc_emac_rx() error paths

[ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ]

arc_emac_rx() has some issues found by code review.

In case netdev_alloc_skb_ip_align() or dma_map_single() failure
rx fifo entry will not be returned to EMAC.

In case dma_map_single() failure previously allocated skb became
lost to driver. At the same time address of newly allocated skb
will not be provided to EMAC.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mediatek: setup proper state for disabled GMAC on the default

[ Upstream commit 7352e252b5bf40d59342494a70354a2d436fd0cd ]

The current solution would setup fixed and force link of 1Gbps to the both
GMAC on the default. However, The GMAC should always be put to link down
state when the GMAC is disabled on certain target boards. Otherwise,
the driver possibly receives unexpected data from the floating hardware
connection through the unused GMAC. Although the driver had been added
certain protection in RX path to get rid of such kind of unexpected data
sent to the upper stack.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-64/Xen: eliminate W+X mappings

[ Upstream commit 2cc42bac1c795f75fcc062b95c6ca7ac1b84d5d8 ]

A few thousand such pages are usually left around due to the re-use of
L1 tables having been provided by the hypervisor (Dom0) or tool stack
(DomU). Set NX in the direct map variant, which needs to be done in L2
due to the dual use of the re-used L1s.

For x86_configure_nx() to actually do what it is supposed to do, call
get_cpu_cap() first. This was broken by commit 4763ed4d45 ("x86, mm:
Clean up and simplify NX enablement") when switching away from the
direct EFER read.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: Fix ion_cma_heap allocations

[ Upstream commit f292b9b28097d8fe870336108e91bd95a14294bf ]

In trying to add support for drm_hwcomposer to HiKey,
I've needed to utilize the ION CMA heap, and I've noticed
problems with allocations on newer kernels failing.

It seems back with 204f672255c2 ("ion: Use CMA APIs directly"),
the ion_cma_heap code was modified to use the CMA API, but
kept the arguments as buffer lengths rather then number of pages.

This results in errors as we don't have enough pages in CMA to
satisfy the exaggerated requests.

This patch converts the ion_cma_heap CMA API usage to properly
request pages.

It also fixes a minor issue in the allocation where in the error
path, the cma_release is called with the buffer->size value which
hasn't yet been set.

Cc: Laura Abbott <labbott@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 204f672255c2 ("staging: android: ion: Use CMA APIs directly")
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix deadlock in cpu hotplug path

[ Upstream commit 116d2f7496c51b2e02e8e4ecdd2bdf5fb9d5a641 ]

Deadlock during cgroup migration from cpu hotplug path when a task T is
being moved from source to destination cgroup.

kworker/0:0
cpuset_hotplug_workfn()
   cpuset_hotplug_update_tasks()
      hotplug_update_tasks_legacy()
        remove_tasks_in_empty_cpuset()
          cgroup_transfer_tasks() // stuck in iterator loop
            cgroup_migrate()
              cgroup_migrate_add_task()

In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T.
Task T will not migrate to destination cgroup. css_task_iter_start()
will keep pointing to task T in loop waiting for task T cg_list node
to be removed.

Task T
do_exit()
  exit_signals() // sets PF_EXITING
  exit_task_namespaces()
    switch_task_namespaces()
      free_nsproxy()
        put_mnt_ns()
          drop_collected_mounts()
            namespace_unlock()
              synchronize_rcu()
                _synchronize_rcu_expedited()
                  schedule_work() // on cpu0 low priority worker pool
                  wait_event() // waiting for work item to execute

Task T inserted a work item in the worklist of cpu0 low priority
worker pool. It is waiting for expedited grace period work item
to execute. This work item will only be executed once kworker/0:0
complete execution of cpuset_hotplug_workfn().

kworker/0:0 ==> Task T ==>kworker/0:0

In case of PF_EXITING task being migrated from source to destination
cgroup, migrate next available task in source cgroup.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: nau8825: fix issue that pop noise when start capture

[ Upstream commit d070f7c703ef26e3db613f24206823f916272fc6 ]

In skylake platform, we hear a loud pop noise(0 dB) at start of
audio capture power up sequence. This patch removes the pop noise
from the recording by adding a delay before enabling ADC.

Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel: fixed spin_lock usage inside atmel_spi_remove

[ Upstream commit 66e900a3d225575c8b48b59ae1fe74bb6e5a65cc ]

The only part of atmel_spi_remove which needs to be atomic is hardware
reset.

atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts
enabled.
atmel_spi_release_dma calls dma_release_channel and dma_release_channel
locks a mutex inside of spin_lock.

So the call of these functions can't be inside a spin_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl

[ Upstream commit 162bd5e5fd921785077b5862d8f2ffabe2fe11e5 ]

The driver may sleep under a spinlock.
The function call path is:
hwsim_get_radio_nl (acquire the spinlock)
  nlmsg_new(GFP_KERNEL) --> may sleep

To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/stacktrace: Make zombie stack traces reliable

[ Upstream commit 6454b3bdd138dfc640deb5e7b9a0668fca2d55dd ]

Commit:

  1959a60182f4 ("x86/dumpstack: Pin the target stack when dumping it")

changed the behavior of stack traces for zombies.  Before that commit,
/proc/<pid>/stack reported the last execution path of the zombie before
it died:

  [<ffffffff8105b877>] do_exit+0x6f7/0xa80
  [<ffffffff8105bc79>] do_group_exit+0x39/0xa0
  [<ffffffff8105bcf0>] __wake_up_parent+0x0/0x30
  [<ffffffff8152dd09>] system_call_fastpath+0x16/0x1b
  [<00007fd128f9c4f9>] 0x7fd128f9c4f9
  [<ffffffffffffffff>] 0xffffffffffffffff

After the commit, it just reports an empty stack trace.

The new behavior is actually probably more correct.  If the stack
refcount has gone down to zero, then the task has already gone through
do_exit() and isn't going to run anymore.  The stack could be freed at
any time and is basically gone, so reporting an empty stack makes sense.

However, save_stack_trace_tsk_reliable() treats such a missing stack
condition as an error.  That can cause livepatch transition stalls if
there are any unreaped zombies.  Instead, just treat it as a reliable,
empty stack.

Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces")
Link: http://lkml.kernel.org/r/e4b09e630e99d0c1080528f0821fc9d9dbaeea82.1513631620.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Reinject transport-mode packets through tasklet

[ Upstream commit acf568ee859f098279eadf551612f103afdacb4e ]

This is an old bugbear of mine:

https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html

By crafting special packets, it is possible to cause recursion
in our kernel when processing transport-mode packets at levels
that are only limited by packet size.

The easiest one is with DNAT, but an even worse one is where
UDP encapsulation is used in which case you just have to insert
an UDP encapsulation header in between each level of recursion.

This patch avoids this problem by reinjecting tranport-mode packets
through a tasklet.

Fixes: b05e106698d9 ("[IPV4/6]: Netfilter IPsec input hooks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/pci: do a msi rearm on init

[ Upstream commit a121027d2747168df0aac0c3da35509eea39f61c ]

On my GP107 when I load nouveau after unloading it, for some reason the
GPU stopped sending or the CPU stopped receiving interrupts if MSI was
enabled.

Doing a rearm once before getting any interrupts fixes this.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: xgene: disable clk on error paths

[ Upstream commit ab14436065c8066c265540312742390d6d07ddd2 ]

There are several error paths in xgene_mdio_probe(),
where clk is left undisabled. The patch fixes them.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sget(): handle failures of register_shrinker()

[ Upstream commit 9ee332d99e4d5a97548943b81c54668450ce641b ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix the issue that a __u16 variable may overflow in sctp_ulpq_renege

[ Upstream commit 5c468674d17056148da06218d4da5d04baf22eac ]

Now when reneging events in sctp_ulpq_renege(), the variable freed
could be increased by a __u16 value twice while freed is of __u16
type. It means freed may overflow at the second addition.

This patch is to fix it by using __u32 type for 'freed', while at
it, also to remove 'if (chunk)' check, as all renege commands are
generated in sctp_eat_data and it can't be NULL.

Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Allow again using asm.h when building for the 'bpf' clang target

[ Upstream commit ca26cffa4e4aaeb09bb9e308f95c7835cb149248 ]

Up to f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
we were able to use x86 headers to build to the 'bpf' clang target, as
done by the BPF code in tools/perf/.

With that commit, we ended up with following failure for 'perf test LLVM', this
is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline
asm support and 6.0 does not recognize the register 'esp', fix it by guarding
that part with an #ifndef __BPF__, that is defined by clang when building to
the "bpf" target.

  # perf test -v LLVM
  37: LLVM search and compile                               :
  37.1: Basic BPF llvm compile                              :
  --- start ---
  test child forked, pid 25526
  Kernel build dir is set to /lib/modules/4.14.0+/build
  set env: KBUILD_DIR=/lib/modules/4.14.0+/build
  unset env: KBUILD_OPTS
  include option is set to  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated  -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
  set env: NR_CPUS=4
  set env: LINUX_VERSION_CODE=0x40e00
  set env: CLANG_EXEC=/usr/local/bin/clang
  set env: CLANG_OPTIONS=-xc
  set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated  -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
  set env: WORKING_DIR=/lib/modules/4.14.0+/build
  set env: CLANG_SOURCE=-
  llvm compiling command template: echo '/*
   * bpf-script-example.c
   * Test basic LLVM building
   */
  #ifndef LINUX_VERSION_CODE
  # error Need LINUX_VERSION_CODE
  # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
  #endif
  #define BPF_ANY 0
  #define BPF_MAP_TYPE_ARRAY 2
  #define BPF_FUNC_map_lookup_elem 1
  #define BPF_FUNC_map_update_elem 2

  static void *(*bpf_map_lookup_elem)(void *map, void *key) =
  (void *) BPF_FUNC_map_lookup_elem;
  static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) =
  (void *) BPF_FUNC_map_update_elem;

  struct bpf_map_def {
  unsigned int type;
  unsigned int key_size;
  unsigned int value_size;
  unsigned int max_entries;
  };

  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def SEC("maps") flip_table = {
  .type = BPF_MAP_TYPE_ARRAY,
  .key_size = sizeof(int),
  .value_size = sizeof(int),
  .max_entries = 1,
  };

  SEC("func=SyS_epoll_wait")
  int bpf_func__SyS_epoll_wait(void *ctx)
  {
  int ind =0;
  int *flag = bpf_map_lookup_elem(&flip_table, &ind);
  int new_flag;
  if (!flag)
  return 0;
  /* flip flag and store back */
  new_flag = !*flag;
  bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY);
  return new_flag;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
  test child finished with 0
  ---- end ----
  LLVM search and compile subtest 0: Ok
  37.2: kbuild searching                                    :
  --- start ---
  test child forked, pid 25950
  Kernel build dir is set to /lib/modules/4.14.0+/build
  set env: KBUILD_DIR=/lib/modules/4.14.0+/build
  unset env: KBUILD_OPTS
  include option is set to  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated  -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
  set env: NR_CPUS=4
  set env: LINUX_VERSION_CODE=0x40e00
  set env: CLANG_EXEC=/usr/local/bin/clang
  set env: CLANG_OPTIONS=-xc
  set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated  -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
  set env: WORKING_DIR=/lib/modules/4.14.0+/build
  set env: CLANG_SOURCE=-
  llvm compiling command template: echo '/*
   * bpf-script-test-kbuild.c
   * Test include from kernel header
   */
  #ifndef LINUX_VERSION_CODE
  # error Need LINUX_VERSION_CODE
  # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
  #endif
  #define SEC(NAME) __attribute__((section(NAME), used))

  #include <uapi/linux/fs.h>
  #include <uapi/asm/ptrace.h>

  SEC("func=vfs_llseek")
  int bpf_func__vfs_llseek(void *ctx)
  {
  return 0;
  }

  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
  In file included from <stdin>:12:
  In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5:
  In file included from /home/acme/git/linux/include/linux/compiler.h:242:
  In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5:
  In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10:
  /home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm
  register unsigned long current_stack_pointer asm(_ASM_SP);
                                                   ^
  /home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP'
  #define _ASM_SP         __ASM_REG(sp)
                          ^
  /home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG'
  #define __ASM_REG(reg)         __ASM_SEL_RAW(e##reg, r##reg)
                                 ^
  /home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW'
  # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a)
                              ^
  /home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW'
  # define __ASM_FORM_RAW(x)     #x
                                 ^
  <scratch space>:4:1: note: expanded from here
  "esp"
  ^
  1 error generated.
  ERROR: unable to compile -
  Hint: Check error message shown above.
  Hint: You can also pre-compile it into .o using:
        clang -target bpf -O2 -c -
        with proper -I and -D options.
  Failed to compile test case: 'kbuild searching'
  test child finished with -1
  ---- end ----
  LLVM search and compile subtest 1: FAILED!

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch

[ Upstream commit 36b0cb84ee858f02c256d26f0cb4229c78e3399e ]

An additional 'ip' will be pushed to the stack, for restoring the
DACR later, if CONFIG_CPU_SW_DOMAIN_PAN defined.

However, the fixup still get the err_ptr by add #8*4 to sp, which
results in the fact that the code area pointed by the LR will be
overwritten, or the kernel will crash if CONFIG_DEBUG_RODATA is enabled.

This patch fixes the stack mismatch.

Fixes: a5e090acbf54 ("ARM: software-based priviledged-no-access support")
Signed-off-by: Lvqiang Huang <Lvqiang.Huang@spreadtrum.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Reduce thread stack to 16 kb

[ Upstream commit da57c5414f49ef9e4bcb9ae0bbafd1d650b31411 ]

In testing, I found that the thread stack can be 16 kB when using an irq
stack.  Without it, the thread stack needs to be 32 kB. Currently, the irq
stack is 32 kB. While it probably could be 16 kB, I would prefer to leave it
as is for safety.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: icmp6: Allow icmp messages to be looped back

[ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ]

One example of when an ICMPv6 packet is required to be looped back is
when a host acts as both a Multicast Listener and a Multicast Router.

A Multicast Router will listen on address ff02::16 for MLDv2 messages.

Currently, MLDv2 messages originating from a Multicast Listener running
on the same host as the Multicast Router are not being delivered to the
Multicast Router. This is due to dst.input being assigned the default
value of dst_discard.

This results in the packet being looped back but discarded before being
delivered to the Multicast Router.

This patch sets dst.input to ip6_input to ensure a looped back packet
is delivered to the Multicast Router.

Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: brcmnand: Zero bitflip is not an error

[ Upstream commit e44b9a9c135727f3410e029910275f40681dc8bc ]

A negative return value of brcmstb_nand_verify_erased_page() indicates a
real bitflip error of an erased page, and other return values (>= 0) show
the corrected bitflip number. Zero return value means no bitflip, but the
current driver code treats it as an error, and eventually leads to
falsely reported ECC error.

Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflip")
Signed-off-by: Albert Hsieh <wen.hsieh@broadcom.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM

[ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ]

When erased subpages are read then the BCH decoder returns STATUS_ERASED
if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips.
When there are bitflips, we have to set these bits again to show the
upper layers a completely erased page. When a bitflip happens in the
exact byte where the bad block marker is, then this byte is swapped
with another byte in block_mark_swapping(). The correction code then
detects a bitflip in another subpage and no longer corrects the bitflip
where it really happens.

Correct this behaviour by calling block_mark_swapping() after the
bitflips have been corrected.

In our case UBIFS failed with this bug because it expects erased
pages to be really empty:

UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735
UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed
UBIFS error (pid 187): do_commit: commit failed, error -117

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support

[ Upstream commit c647c0d62c82eb3ddf78a0d8b3d58819d9f552aa ]

This patch adds support for Telit ME910 PID 0x1101.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: aquantia: Fix hardware DMA stream overload on large MRRS

[ Upstream commit 1e366161510f266516107a69db91f1f2edaea11c ]

Systems with large MRRS on device (2K, 4K) with high data rates and/or
large MTU, atlantic observes DMA packet buffer overflow. On some systems
that causes PCIe transaction errors, hardware NMIs or datapath freeze.
This patch
1) Limits MRRS from device side to 2K (thats maximum our hardware supports)
2) Limit maximum size of outstanding TX DMA data read requests. This makes
hardware buffers running fine.

Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: aquantia: Fix actual speed capabilities reporting

[ Upstream commit e4d02ca04c6d48ab2226342a1c4ed54f1dbb72bd ]

Different hardware device Ids correspond to different maximum speed
available. Extra checks were added for devices D108 and D109 to
remove unsupported speeds from these device capabilities list.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: check hw sectors before setting chunk sectors

[ Upstream commit 249159c5f15812140fa216f9997d799ac0023a1f ]

Some devices with IDs matching the "stripe" quirk don't actually have
this quirk, and don't have an MDTS value. When MDTS is not set, the
driver sets the max sectors to UINT_MAX, which is not a power of 2,
hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting
chunk sectors for such devices.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-fc: remove double put reference if admin connect fails

[ Upstream commit 4596e752db02d47038cd7c965419789ab15d1985 ]

There are two put references in the failure case of initial
create_association. The first put actually frees the controller, thus the
second put references freed memory.

Remove the unnecessary 2nd put.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: cpcap-usb: Fix platform_get_irq_byname's error checking.

[ Upstream commit e796cc6a3a9186c92092e2f5929cf8f65b56cf01 ]

The platform_get_irq_byname() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq_byname() error
checking for zero is not correct.

Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: fsl-edma: disable clks on all error paths

[ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ]

Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.

To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.

In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Fix I/O drop during reset

[ Upstream commit 5771cfffdffe709ae9b403b6f80438ca40bf850e ]

"FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate
command timeout. Using the same flag in reset handler causes the command
to time out and the I/Os were dropped.

Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is
properly handled in eh_reset handler.

[mkp: tweaked commit message]

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/frame_vector.c: release a semaphore in 'get_vaddr_frames()'

[ Upstream commit 1f704fd0d14043e76e80f6b8b2251b9b2cedcca6 ]

A semaphore is acquired before this check, so we must release it before
leaving.

Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr
Fixes: b7f0554a56f2 ("mm: fail get_vaddr_frames() for filesystem-dax mappings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: avoid gcc-8 warning for get_task_comm

[ Upstream commit 3756f6401c302617c5e091081ca4d26ab604bec5 ]

gcc-8 warns about using strncpy() with the source size as the limit:

  fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]

This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.

This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.

There are only 23 callsites which I all reviewed to ensure this is
currently the case.  We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.

Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)

commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream.

The POSIX specification defines that relative CLOCK_REALTIME timers are not
affected by clock modifications. Those timers have to use CLOCK_MONOTONIC
to ensure POSIX compliance.

The introduction of the additional HRTIMER_MODE_PINNED mode broke this
requirement for pinned timers.

There is no user space visible impact because user space timers are not
using pinned mode, but for consistency reasons this needs to be fixed.

Check whether the mode has the HRTIMER_MODE_REL bit set instead of
comparing with HRTIMER_MODE_ABS.

Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Fixes: 597d0275736d ("timers: Framework for identifying pinned timers")
Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.23

microblaze: fix endian handling

commit 71e7673dadfdae0605d4c1f66ecb4b045c79fe0f upstream.

Building an allmodconfig kernel fails horribly because of
endian mismatch. It turns out that the -mlittle-endian
switch was not honored at all as we were using the wrong
Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS.
Finally, the linker flags did not get set right.

This addresses all three of those issues, which now lets
me build both big-endian and little-endian kernels for
testing.

Fixes: 428dbf156cc5 ("arch: change default endian for microblaze")
Fixes: 206d3642d8ee ("arch/microblaze: add choice for endianness and update Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m32r: fix endianness constraints

commit c95f121142a41c951fd62683a5574f2a7b37c573 upstream.

The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN
configuration options.  As they are user-selectable and independent,
this allows invalid configurations:

  - All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is
    not set, causing compiler warnings like:

include/linux/byteorder/big_endian.h:7:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
 #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN
  ^

  - Since commit 5bdfca6435b82944 ("m32r: define CPU_BIG_ENDIAN"),
    building an allmodconfig or allyesconfig enables both
    CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN.
    While this did get rid of the warning above, both options are
    obviously mutually exclusive.

Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as
before, and by making sure exactly one of CPU_BIG_ENDIAN and
CPU_LITTLE_ENDIAN is always enabled.

Link: http://lkml.kernel.org/r/1509361505-18150-1-git-send-email-geert@linux-m68k.org
Fixes: 5bdfca6435b82944 ("m32r: define CPU_BIG_ENDIAN")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/breadcrumbs: Ignore unsubmitted signalers

commit 117172c8f9d40ba1de8cb35c6e614422faa03330 upstream.

When a request is preempted, it is unsubmitted from the HW queue and
removed from the active list of breadcrumbs. In the process, this
however triggers the signaler and it may see the clear rbtree with the
old, and still valid, seqno, or it may match the cleared seqno with the
now zero rq->global_seqno. This confuses the signaler into action and
signaling the fence.

Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206094633.30181-1-chris@chris-wilson.co.uk
(cherry picked from commit fd10e2ce9905030d922e179a8047a4d50daffd8e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213090154.17373-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add new device to use atpx quirk

commit 6e59de2048eb375a9bfcd39461ef841cd2a78962 upstream.

The affected system (0x0813) is pretty similar to another one (0x0812),
it also needs to use ATPX power control.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)

commit 458d876eb869d5a88b53074c6c271b8b9adc0f07 upstream.

We only support vga_switcheroo and runtime pm on PX/HG systems
so forcing runpm to 1 doesn't do anything useful anyway.

Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so
that the cleanup path is correct as well.  This mirrors what
radeon does as well.

v2: rework the patch originally sent by Lukas (Alex)

Acked-by: Lukas Wunner <lukas@wunner.de>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add atpx quirk handling (v2)

commit 052c299080cd6859f82a8154a7a673fafabe644c upstream.

Add quirks for handling PX/HG systems.  In this case, add
a quirk for a weston dGPU that only seems to properly power
down using ATPX power control rather than HG (_PR3).

v2: append a new weston XT

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> (v2)
Reviewed-and-Tested-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: only check mmBIF_IOV_FUNC_IDENTIFIER on tonga/fiji

commit 57ad33a307bf85cafda3a77c03a555c9f9ee4139 upstream.

We only support SR-IOV on tonga/fiji.  Don't check this register
on other VI parts.

Fixes: 048765ad5af7c89 (amdgpu: fix asic initialization for virtualized environments (v2))
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add dpm quirk for Jet PRO (v2)

commit f2e5262f75ecb40a6e56554e156a292ab9e1d1b7 upstream.

Fixes stability issues.

v2: clamp sclk to 600 Mhz

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: disable MMHUB power gating on raven

commit 400b6afbaa949914460e5fd1d769c5e26ef1f6b8 upstream.

MMHUB power gating still has issue, and doesn't work on raven at current. So
disable it for the moment.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Handle unexpected holes in color-eviction

commit b8ff1802815913aad52695898cccbc9f77b7e726 upstream.

During eviction, the driver may free more than one hole in the drm_mm
due to the side-effects in evicting the scanned nodes. However,
drm_mm_scan_color_evict() expects that the scan result is the first
available hole (in the mru freed hole_stack list):

  kernel BUG at drivers/gpu/drm/drm_mm.c:844!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei
  CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G     U           4.16.0-rc1-g740f57c54ecf-kasan_6+ #1
  Hardware name: Dell Inc. OptiPlex 755                 /0PU052, BIOS A08 02/19/2008
  RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0
  RSP: 0018:ffff880057a573f8 EFLAGS: 00010287
  RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000
  RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10
  RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000
  R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82
  R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608
  FS:  00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0
  Call Trace:
   ? drm_mm_scan_remove_block+0x330/0x330
   ? drm_mm_scan_remove_block+0x151/0x330
   i915_gem_evict_something+0x711/0xbd0 [i915]
   ? igt_evict_contexts+0x50/0x50 [i915]
   ? nop_clear_range+0x10/0x10 [i915]
   ? igt_evict_something+0x90/0x90 [i915]
   ? i915_gem_gtt_reserve+0x1a1/0x320 [i915]
   i915_gem_gtt_insert+0x237/0x400 [i915]
   __i915_vma_do_pin+0xc25/0x1a20 [i915]
   eb_lookup_vmas+0x1c63/0x3790 [i915]
   ? i915_gem_check_execbuffer+0x250/0x250 [i915]
   ? trace_hardirqs_on_caller+0x33f/0x590
   ? _raw_spin_unlock_irqrestore+0x39/0x60
   ? __pm_runtime_resume+0x7d/0xf0
   i915_gem_do_execbuffer+0x86a/0x2ff0 [i915]
   ? __kmalloc+0x132/0x340
   ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
   ? drm_ioctl_kernel+0x12e/0x1c0
   ? drm_ioctl+0x662/0x980
   ? eb_relocate_slow+0xa90/0xa90 [i915]
   ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
   ? __might_fault+0xea/0x1a0
   i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915]
   ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
   ? lock_acquire+0x3c0/0x3c0
   ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
   drm_ioctl_kernel+0x12e/0x1c0
   drm_ioctl+0x662/0x980
   ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
   ? drm_getstats+0x20/0x20
   ? debug_check_no_obj_freed+0x2a6/0x8c0
   do_vfs_ioctl+0x170/0xe70
   ? ioctl_preallocate+0x170/0x170
   ? task_work_run+0xbe/0x160
   ? lock_acquire+0x3c0/0x3c0
   ? trace_hardirqs_on_caller+0x33f/0x590
   ? _raw_spin_unlock_irq+0x2f/0x50
   SyS_ioctl+0x36/0x70
   ? do_vfs_ioctl+0xe70/0xe70
   do_syscall_64+0x18c/0x5d0
   entry_SYSCALL_64_after_hwframe+0x26/0x9b
  RIP: 0033:0x7f2ddf13b587
  RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587
  RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003
  RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120
  R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469
  R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7
  Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89
  RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8

We can trivially relax this assumption by searching the hole_stack for
the scan result and warn instead if the driver called us without any
result.

Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/cirrus: Load lut in crtc_commit

commit 745fd50f3b044db6a3922e1718306555613164b0 upstream.

In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since

commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date:   Tue Jul 4 12:36:57 2017 +0200

drm/fb-helper: factor out pseudo-palette

that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.

Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
References: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180131110450.22153-1-daniel.vetter@ffwll.ch
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path

commit 17aa31f13cad25daa19d3f923323f552e87bc874 upstream.

This fixes an issue that a gadget driver (usb_f_fs) is possible to
stop rx transactions after the usb-dmac is used because the following
functions missed to set/check the "running" flag.
 - usbhsf_dma_prepare_pop_with_usb_dmac()
 - usbhsf_dma_pop_done_with_usb_dmac()

So, if next transaction uses pio, the usbhsf_prepare_pop() can not
start the transaction because the "running" flag is 0.

Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Use config_ep_by_speed()

commit 675272d092e4a5570bace92593776f7348daf4c5 upstream.

In commit 2bfa0719ac2a ("usb: gadget: function: f_fs: pass
companion descriptor along") there is a pointer arithmetic
bug where the comp_desc is obtained as follows:

 comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
       USB_DT_ENDPOINT_SIZE);

Since ds is a pointer to usb_endpoint_descriptor, adding
7 to it ends up going out of bounds (7 * sizeof(struct
usb_endpoint_descriptor), which is actually 7*9 bytes) past
the SS descriptor. As a result the maxburst value will be
read incorrectly, and the UDC driver will also get a garbage
comp_desc (assuming it uses it).

Since Felipe wrote, "Eventually, f_fs.c should be converted
to use config_ep_by_speed() like all other functions, though",
let's finally do it. This allows the other usb_ep fields to
be properly populated, such as maxpacket and mult. It also
eliminates the awkward speed-based descriptor lookup since
config_ep_by_speed() does that already using the ones found
in struct usb_function.

Fixes: 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along")
Cc: stable@vger.kernel.org
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Process all descriptors during bind

commit 6cf439e0d37463e42784271179c8a308fd7493c6 upstream.

During _ffs_func_bind(), the received descriptors are evaluated
to prepare for binding with the gadget in order to allocate
endpoints and optionally set up OS descriptors. However, the
high- and super-speed descriptors are only parsed based on
whether the gadget_is_dualspeed() and gadget_is_superspeed()
calls are true, respectively.

This is a problem in case a userspace program always provides
all of the {full,high,super,OS} descriptors when configuring a
function. Then, for example if a gadget device is not capable
of SuperSpeed, the call to ffs_do_descs() for the SS descriptors
is skipped, resulting in an incorrect offset calculation for
the vla_ptr when moving on to the OS descriptors that follow.
This causes ffs_do_os_descs() to fail as it is now looking at
the SS descriptors' offset within the raw_descs buffer instead.

_ffs_func_bind() should evaluate the descriptors unconditionally,
so remove the checks for gadget speed.

Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support")
Cc: stable@vger.kernel.org
Co-Developed-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: musb: host: don't start next rx urb if current one failed"

commit 44eb5e12b845cc8a0634f21b70ef07d774eb4b25 upstream.

This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80.

commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed")
along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set")
try to solve the issue described in [1], but the latter alone is
sufficient, and the former causes the issue as in [2], so now revert it.

[1] https://marc.info/?l=linux-usb&m=146173995117456&w=2
[2] https://marc.info/?l=linux-usb&m=151689238420622&w=2

Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ldusb: add PIDs for new CASSY devices supported by this driver

commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 upstream.

This patch adds support for new CASSY devices to the ldusb driver. The
PIDs are also added to the ignore list in hid-quirks.

Signed-off-by: Karsten Koop <kkoop@ld-didactic.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: ep0: Reset TRB counter for ep0 IN

commit f035d139ffece7b6a7b8bfb17bd0ba715ee57a04 upstream.

DWC3 tracks TRB counter for each ep0 direction separately. In control
read transfer completion handler, the driver needs to reset the TRB
enqueue counter for ep0 IN direction. Currently the driver only resets
the TRB counter for control OUT endpoint. Check for the data direction
and properly reset the TRB counter from correct control endpoint.

Cc: stable@vger.kernel.org
Fixes: c2da2ff00606 ("usb: dwc3: ep0: don't use ep0in for transfers")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Set maxpacket size for ep0 IN

commit 6180026341e852a250e1f97ebdcf71684a3c81b9 upstream.

There are 2 control endpoint structures for DWC3. However, the driver
only updates the OUT direction control endpoint structure during
ConnectDone event. DWC3 driver needs to update the endpoint max packet
size for control IN endpoint as well. If the max packet size is not
properly set, then the driver will incorrectly calculate the data
transfer size and fail to send ZLP for HS/FS 3-stage control read
transfer.

The fix is simply to update the max packet size for the ep0 IN direction
during ConnectDone event.

Cc: stable@vger.kernel.org
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci: use correct device pointer for dma ops

commit 02a10f061a3f8bca1b37332672f50a107198adbe upstream.

commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus")
converted to use hcd->self.sysdev for DMA operations instead of
hcd->self.controller, but forgot to do it for hcd test mode. Replace
the correct one in this commit.

Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA

commit 06998a756a3865817b87a129a7e5d5bb66dc1ec3 upstream.

Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display
AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support
6bpc instead of 8 bpc.

Hence, use 6 bpc quirk for this panel.

Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"")
BugLink: https://bugs.launchpad.net/bugs/1749420
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add delay-init quirk for Corsair K70 RGB keyboards

commit 7a1646d922577b5b48c0d222e03831141664bb59 upstream.

Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.

Device ids found here:
usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Corsair K70 RGB Gaming Keyboard

Signed-off-by: Jack Stocker <jackstocker.93@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: Fix CTR_EL0 field definitions

commit be68a8aaf925aaf35574260bf820bb09d2f9e07f upstream.

Our field definitions for CTR_EL0 suffer from a number of problems:

  - The IDC and DIC fields are missing, which causes us to enable CTR
    trapping on CPUs with either of these returning non-zero values.

  - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as
    FTR_HIGHER_SAFE so that applications can use it to avoid false sharing.

  - [nit] A RES1 field is described as "RAO"

This patch updates the CTR_EL0 field definitions to fix these issues.

Cc: <stable@vger.kernel.org>
Cc: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Disable unhandled signal log messages by default

commit 5ee39a71fd89ab7240c5339d04161c44a8e03269 upstream.

aarch64 unhandled signal kernel messages are very verbose, suggesting
them to be more of a debugging aid:

sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr
0x92000046, in sigsegv[400000+71000]
CPU: 1 PID: 33 Comm: sigsegv Tainted: G        W        4.15.0-rc3+ #3
Hardware name: linux,dummy-virt (DT)
pstate: 60000000 (nZCv daif -PAN -UAO)
pc : 0x4003f4
lr : 0x4006bc
sp : 0000fffffe94a060
x29: 0000fffffe94a070 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 00000000004001b0
x23: 0000000000486ac8 x22: 00000000004001c8
x21: 0000000000000000 x20: 0000000000400be8
x19: 0000000000400b30 x18: 0000000000484728
x17: 000000000865ffc8 x16: 000000000000270f
x15: 00000000000000b0 x14: 0000000000000002
x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000000 x10: 0008000020008008
x9 : 000000000000000f x8 : ffffffffffffffff
x7 : 0004000000000000 x6 : ffffffffffffffff
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000004003e4 x2 : 0000fffffe94a1e8
x1 : 000000000000000a x0 : 0000000000000000

Disable them by default, so they can be enabled using
/proc/sys/debug/exception-trace.

Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Remove unimplemented syscall log message

commit 1962682d2b2fbe6cfa995a85c53c069fadda473e upstream.

Stop printing a (ratelimited) kernel message for each instance of an
unimplemented syscall being called. Userland making an unimplemented
syscall is not necessarily misbehaviour and to be expected with a
current userland running on an older kernel. Also, the current message
looks scary to users but does not actually indicate a real problem nor
help them narrow down the cause. Just rely on sys_ni_syscall() to return
-ENOSYS.

Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()

commit 46408ea558df13b110e0866b99624384a33bdeba upstream.

There is a race condition between finish_unlinks->finish_urb() function
and usb_kill_urb() in ohci controller case. The finish_urb calls
spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call,
then if during this time, usb_kill_urb is called for another endpoint,
then new ed will be added to ed_rm_list at beginning for unlink, and
ed_rm_list will point to newly added.

When finish_urb() is completed in finish_unlinks() and ed->td_list
becomes empty as in below code (in finish_unlinks() function):

        if (list_empty(&ed->td_list)) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
        } else if (ohci->rh_state == OHCI_RH_RUNNING) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
                ed_schedule(ohci, ed);
        }

The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next
and previously added ed by usb_kill_urb will be left unreferenced by
ed_rm_list. This causes usb_kill_urb() hang forever waiting for
finish_unlink to remove added ed from ed_rm_list.

The main reason for hang in this race condtion is addition and removal
of ed from ed_rm_list in the beginning during usb_kill_urb and later
last* is modified in finish_unlinks().

As suggested by Alan Stern, the solution for proper handling of
ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing
any URBs. Then at the end, we can add ed back to the list if necessary.

This properly handle the updated ohci->ed_rm_list in usb_kill_urb().

Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()

commit b2685bdacdaab065c172b97b55ab46c6be77a037 upstream.

Running io_watchdog_func() while ohci_urb_enqueue() is running can
cause a race condition where ohci->prev_frame_no is corrupted and the
watchdog can mis-detect following error:

  ohci-platform 664a0800.usb: frame counter not updating; disabled
  ohci-platform 664a0800.usb: HC died; cleaning up

Specifically, following scenario causes a race condition:

  1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags)
     and enters the critical section
  2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it
     returns false
  3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number
     read by ohci_frame_no(ohci)
  4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer()
  5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock,
     flags) and exits the critical section
  6. Later, ohci_urb_enqueue() is called
  7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags)
     and enters the critical section
  8. The timer scheduled on step 4 expires and io_watchdog_func() runs
  9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags)
     and waits on it because ohci_urb_enqueue() is already in the
     critical section on step 7
 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it
     returns false
 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number
     read by ohci_frame_no(ohci) because the frame number proceeded
     between step 3 and 6
 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer()
 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock,
     flags) and exits the critical section, then wake up
     io_watchdog_func() which is waiting on step 9
 14. io_watchdog_func() enters the critical section
 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no
     variable to the frame number
 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no

On step 16, because this calling of io_watchdog_func() is scheduled on
step 4, the frame number set in ohci->prev_frame_no is expected to the
number set on step 3.  However, ohci->prev_frame_no is overwritten on
step 11.  Because step 16 is executed soon after step 11, the frame
number might not proceed, so ohci->prev_frame_no must equals to
frame_no.

To address above scenario, this patch introduces a special sentinel
value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when
the watchdog is not pending or running.  When ohci_urb_enqueue()
schedules the watchdog (step 4 and 12 above), it compares
ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is
not overwritten while io_watchdog_func() is running.

Signed-off-by: Shigeru Yoshida <Shigeru.Yoshida@windriver.com>
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/cxgb4: Extend T3 PCI quirk to T4+ devices

commit 7dcf688d4c78a18ba9538b2bf1b11dc7a43fe9be upstream.

We've run into a problem where our device is attached
to a Virtual Machine and the use of the new pci_set_vpd_size()
API doesn't help.  The VM kernel has been informed that
the accesses are okay, but all of the actual VPD Capability
Accesses are trapped down into the KVM Hypervisor where it
goes ahead and imposes the silent denials.

The right idea is to follow the kernel.org
commit 1c7de2b4ff88 ("PCI: Enable access to non-standard VPD for
Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored
to establish a PCI Quirk for our T3-based adapters. This commit
extends that PCI Quirk to cover Chelsio T4 devices and later.

The advantage of this approach is that the VPD Size gets set early
in the Base OS/Hypervisor Boot and doesn't require that the cxgb4
driver even be available in the Base OS/Hypervisor.  Thus PF4 can
be exported to a Virtual Machine and everything should work.

Fixes: 67e658794ca1 ("cxgb4: Set VPD size so we can read both VPD structures")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mips-gic: Avoid spuriously handling masked interrupts

commit 285cb4f62319737e6538252cf1a67ce9da5cf3d5 upstream.

Commit 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading
GIC_SH_MASK*") removed the read of the hardware mask register when
handling shared interrupts, instead using the driver's shadow pcpu_masks
entry as the effective mask. Unfortunately this did not take account of
the write to pcpu_masks during gic_shared_irq_domain_map, which
effectively unmasks the interrupt early. If an interrupt is asserted,
gic_handle_shared_int decodes and processes the interrupt even though it
has not yet been unmasked via gic_unmask_irq, which also sets the
appropriate bit in pcpu_masks.

On the MIPS Boston board, when a console command line of
"console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in
the UART, which is immediately raised to the GIC. The interrupt has been
mapped, but no handler has yet been registered, nor is it expected to be
unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map
has effectively unmasked it, resulting in endless reports of:

[    5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0
[    5.062057] ->handle_irq():  ffffffff801b1838,
[    5.062175] handle_bad_irq+0x0/0x2c0

Where IRQ 13 is the UART interrupt.

To fix this, just remove the write to pcpu_masks in
gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the
correct place for what is now the effective unmasking.

Cc: stable@vger.kernel.org
Fixes: 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()

commit 21ec30c0ef5234fb1039cc7c7737d885bf875a9e upstream.

A DMB instruction can be used to ensure the relative order of only
memory accesses before and after the barrier. Since writes to system
registers are not memory operations, barrier DMB is not sufficient
for observability of memory accesses that occur before ICC_SGI1R_EL1
writes.

A DSB instruction ensures that no instructions that appear in program
order after the DSB instruction, can execute until the DSB instruction
has completed.

Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>,
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, swap, frontswap: fix THP swap if frontswap enabled

commit 7ba716698cc53f8d5367766c93c538c7da6c68ce upstream.

It was reported by Sergey Senozhatsky that if THP (Transparent Huge
Page) and frontswap (via zswap) are both enabled, when memory goes low
so that swap is triggered, segfault and memory corruption will occur in
random user space applications as follow,

kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000]
 #0  0x00007fc08889ae0d _int_malloc (libc.so.6)
 #1  0x00007fc08889c2f3 malloc (libc.so.6)
 #2  0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt)
 #3  0x0000560e6005e75c n/a (urxvt)
 #4  0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt)
 #5  0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt)
 #6  0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt)
 #7  0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt)
 #8  0x0000560e6005cb55 ev_run (urxvt)
 #9  0x0000560e6003b9b9 main (urxvt)
 #10 0x00007fc08883af4a __libc_start_main (libc.so.6)
 #11 0x0000560e6003f9da _start (urxvt)

After bisection, it was found the first bad commit is bd4c82c22c36 ("mm,
THP, swap: delay splitting THP after swapped out").

The root cause is as follows:

When the pages are written to swap device during swapping out in
swap_writepage(), zswap (fontswap) is tried to compress the pages to
improve performance.  But zswap (frontswap) will treat THP as a normal
page, so only the head page is saved.  After swapping in, tail pages
will not be restored to their original contents, causing memory
corruption in the applications.

This is fixed by refusing to save page in the frontswap store functions
if the page is a THP.  So that the THP will be swapped out to swap
device.

Another choice is to split THP if frontswap is enabled.  But it is found
that the frontswap enabling isn't flexible.  For example, if
CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if
zswap itself isn't enabled.

Frontswap has multiple backends, to make it easy for one backend to
enable THP support, the THP checking is put in backend frontswap store
functions instead of the general interfaces.

Link: http://lkml.kernel.org/r/20180209084947.22749-1-ying.huang@intel.com
Fixes: bd4c82c22c367e068 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org> [put THP checking in backend]
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shaohua Li <shli@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()

commit 85c615eb52222bc5fab6c7190d146bc59fac289e upstream.

GCC-8 shows a warning for the x86 oprofile code that copies per-CPU
data from CPU 0 to all other CPUs, which when building a non-SMP
kernel turns into a memcpy() with identical source and destination
pointers:

 arch/x86/oprofile/nmi_int.c: In function 'mux_clone':
 arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
   memcpy(per_cpu(cpu_msrs, cpu).multiplex,
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          per_cpu(cpu_msrs, 0).multiplex,
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          sizeof(struct op_msr) * model->num_virt_counters);
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 arch/x86/oprofile/nmi_int.c: In function 'nmi_setup':
 arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
 arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

I have analyzed a number of such warnings now: some are valid and the
GCC warning is welcome. Others turned out to be false-positives, and
GCC was changed to not warn about those any more. This is a corner case
that is a false-positive but the GCC developers feel it's better to keep
warning about it.

In this case, it seems best to work around it by telling GCC
a little more clearly that this code path is never hit with
an IS_ENABLED() configuration check.

Cc:stable as we also want old kernels to build cleanly with GCC-8.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Sebor <msebor@gcc.gnu.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: oprofile-list@lists.sf.net
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kbuild: always define endianess in kconfig.h

commit 101110f6271ce956a049250c907bc960030577f8 upstream.

Build testing with LTO found a couple of files that get compiled
differently depending on whether asm/byteorder.h gets included early
enough or not.  In particular, include/asm-generic/qrwlock_types.h is
affected by this, but there are probably others as well.

The symptom is a series of LTO link time warnings, including these:

    net/netlabel/netlabel_unlabeled.h:223: error: type of 'netlbl_unlhsh_add' does not match original declaration [-Werror=lto-type-mismatch]
     int netlbl_unlhsh_add(struct net *net,
    net/netlabel/netlabel_unlabeled.c:377: note: 'netlbl_unlhsh_add' was previously declared here

    include/net/ipv6.h:360: error: type of 'ipv6_renew_options_kern' does not match original declaration [-Werror=lto-type-mismatch]
     ipv6_renew_options_kern(struct sock *sk,
    net/ipv6/exthdrs.c:1162: note: 'ipv6_renew_options_kern' was previously declared here

    net/core/dev.c:761: note: 'dev_get_by_name_rcu' was previously declared here
     struct net_device *dev_get_by_name_rcu(struct net *net, const char *name)
    net/core/dev.c:761: note: code may be misoptimized unless -fno-strict-aliasing is used

    drivers/gpu/drm/i915/i915_drv.h:3377: error: type of 'i915_gem_object_set_to_wc_domain' does not match original declaration [-Werror=lto-type-mismatch]
     i915_gem_object_set_to_wc_domain(struct drm_i915_gem_object *obj, bool write);
    drivers/gpu/drm/i915/i915_gem.c:3639: note: 'i915_gem_object_set_to_wc_domain' was previously declared here

    include/linux/debugfs.h:92:9: error: type of 'debugfs_attr_read' does not match original declaration [-Werror=lto-type-mismatch]
     ssize_t debugfs_attr_read(struct file *file, char __user *buf,
    fs/debugfs/file.c:318: note: 'debugfs_attr_read' was previously declared here

    include/linux/rwlock_api_smp.h:30: error: type of '_raw_read_unlock' does not match original declaration [-Werror=lto-type-mismatch]
     void __lockfunc _raw_read_unlock(rwlock_t *lock) __releases(lock);
    kernel/locking/spinlock.c:246:26: note: '_raw_read_unlock' was previously declared here

    include/linux/fs.h:3308:5: error: type of 'simple_attr_open' does not match original declaration [-Werror=lto-type-mismatch]
     int simple_attr_open(struct inode *inode, struct file *file,
    fs/libfs.c:795: note: 'simple_attr_open' was previously declared here

All of the above are caused by include/asm-generic/qrwlock_types.h
failing to include asm/byteorder.h after commit e0d02285f16e
("locking/qrwlock: Use 'struct qrwlock' instead of 'struct __qrwlock'")
in linux-4.15.

Similar bugs may or may not exist in older kernels as well, but there is
no easy way to test those with link-time optimizations, and kernels
before 4.14 are harder to fix because they don't have Babu's patch
series

We had similar issues with CONFIG_ symbols in the past and ended up
always including the configuration headers though linux/kconfig.h.  This
works around the issue through that same file, defining either
__BIG_ENDIAN or __LITTLE_ENDIAN depending on CONFIG_CPU_BIG_ENDIAN,
which is now always set on all architectures since commit 4c97a0c8fee3
("arch: define CPU_BIG_ENDIAN for all fixed big endian archs").

Link: http://lkml.kernel.org/r/20180202154104.1522809-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adis_lib: Initialize trigger before requesting interrupt

commit f027e0b3a774e10302207e91d304bbf99e3a8b36 upstream.

The adis_probe_trigger() creates a new IIO trigger and requests an
interrupt associated with the trigger. The interrupt uses the generic
iio_trigger_generic_data_rdy_poll() function as its interrupt handler.

Currently the driver initializes some fields of the trigger structure after
the interrupt has been requested. But an interrupt can fire as soon as it
has been requested. This opens up a race condition.

iio_trigger_generic_data_rdy_poll() will access the trigger data structure
and dereference the ops field. If the ops field is not yet initialized this
will result in a NULL pointer deref.

It is not expected that the device generates an interrupt at this point, so
typically this issue did not surface unless e.g. due to a hardware
misconfiguration (wrong interrupt number, wrong polarity, etc.).

But some newer devices from the ADIS family start to generate periodic
interrupts in their power-on reset configuration and unfortunately the
interrupt can not be masked in the device.  This makes the race condition
much more visible and the following crash has been observed occasionally
when booting a system using the ADIS16460.

Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257
Hardware name: Xilinx Zynq Platform
task: ef04f640 task.stack: ef050000
PC is at iio_trigger_notify_done+0x30/0x68
LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20
pc : [<c042d868>]    lr : [<c042d924>]    psr: 60000193
sp : ef051bb8  ip : 00000000  fp : ef106400
r10: c081d80a  r9 : ef3bfa00  r8 : 00000087
r7 : ef051bec  r6 : 00000000  r5 : ef3bfa00  r4 : ee92ab00
r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : ee97e400
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 18c5387d  Table: 0000404a  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xef050210)
[<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118)
[<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58)
[<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c)
[<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130)
[<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c)
[<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4)
[<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c)
[<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8)

To fix this make sure that the trigger is fully initialized before
requesting the interrupt.

Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library")
Reported-by: Robin Getz <Robin.Getz@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: buffer: check if a buffer has been set up when poll is called

commit 4cd140bda6494543f1c1b0ccceceaa44b676eef6 upstream.

If no iio buffer has been set up and poll is called return 0.
Without this check there will be a null pointer dereference when
calling poll on a iio driver without an iio buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined

commit 511051d509ec54642dd6d30fdf2caa33c23619cc upstream.

Functions for triggered buffer support are needed by this module.
If they are not defined accidentally by another driver, there's an error
thrown out while linking.

Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Fixes: a83195937151 ("iio: srf08: add triggered buffer support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32: fix stm32h7_adc_enable error handling

commit a3b5655ebdb501a98a45c0d3265dca9f2fe0218a upstream.

Error handling in stm32h7_adc_enable routine doesn't unwind enable
sequence correctly. ADEN can only be cleared by hardware (e.g. by
writing one to ADDIS).
It's also better to clear ADRDY just after it's been set by hardware.

Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Sanitize user entered port numbers prior to access it

commit 5d4c05c3ee36f67ddc107ab5ea0898af01a62cc1 upstream.

==================================================================
BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs+0x6f2/0x8c0
Read of size 4 at addr ffff88006476a198 by task syzkaller697701/265

CPU: 0 PID: 265 Comm: syzkaller697701 Not tainted 4.15.0+ #90
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
 dump_stack+0xde/0x164
 ? dma_virt_map_sg+0x22c/0x22c
 ? show_regs_print_info+0x17/0x17
 ? lock_contended+0x11a0/0x11a0
 print_address_description+0x83/0x3e0
 kasan_report+0x18c/0x4b0
 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0
 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0
 ? lookup_get_idr_uobject+0x120/0x200
 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0
 copy_ah_attr_from_uverbs+0x6f2/0x8c0
 ? modify_qp+0xd0e/0x1350
 modify_qp+0xd0e/0x1350
 ib_uverbs_modify_qp+0xf9/0x170
 ? ib_uverbs_query_qp+0xa70/0xa70
 ib_uverbs_write+0x7f9/0xef0
 ? attach_entity_load_avg+0x8b0/0x8b0
 ? ib_uverbs_query_qp+0xa70/0xa70
 ? uverbs_devnode+0x110/0x110
 ? cyc2ns_read_end+0x10/0x10
 ? print_irqtrace_events+0x280/0x280
 ? sched_clock_cpu+0x18/0x200
 ? _raw_spin_unlock_irq+0x29/0x40
 ? _raw_spin_unlock_irq+0x29/0x40
 ? _raw_spin_unlock_irq+0x29/0x40
 ? time_hardirqs_on+0x27/0x670
 __vfs_write+0x10d/0x700
 ? uverbs_devnode+0x110/0x110
 ? kernel_read+0x170/0x170
 ? _raw_spin_unlock_irq+0x29/0x40
 ? finish_task_switch+0x1bd/0x7a0
 ? finish_task_switch+0x194/0x7a0
 ? prandom_u32_state+0xe/0x180
 ? rcu_read_unlock+0x80/0x80
 ? security_file_permission+0x93/0x260
 vfs_write+0x1b0/0x550
 SyS_write+0xc7/0x1a0
 ? SyS_read+0x1a0/0x1a0
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x433c29
RSP: 002b:00007ffcf2be82a8 EFLAGS: 00000217

Allocated by task 62:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc+0x141/0x480
 dup_fd+0x101/0xcc0
 copy_process.part.62+0x166f/0x4390
 _do_fork+0x1cb/0xe90
 kernel_thread+0x34/0x40
 call_usermodehelper_exec_work+0x112/0x260
 process_one_work+0x929/0x1aa0
 worker_thread+0x5c6/0x12a0
 kthread+0x346/0x510
 ret_from_fork+0x3a/0x50

Freed by task 259:
 kasan_slab_free+0x71/0xc0
 kmem_cache_free+0xf3/0x4c0
 put_files_struct+0x225/0x2c0
 exit_files+0x88/0xc0
 do_exit+0x67c/0x1520
 do_group_exit+0xe8/0x380
 SyS_exit_group+0x1e/0x20
 entry_SYSCALL_64_fastpath+0x1e/0x8b

The buggy address belongs to the object at ffff88006476a000
 which belongs to the cache files_cache of size 832
The buggy address is located 408 bytes inside of
 832-byte region [ffff88006476a000, ffff88006476a340)
The buggy address belongs to the page:
page:ffffea000191da80 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 0000000100080008
raw: 0000000000000000 0000000100000001 ffff88006bcf7a80 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88006476a080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88006476a100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88006476a180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff88006476a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88006476a280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.11
Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Fix circular locking dependency

commit 1ff5325c3ca1843228a86549318bbd3b414b9207 upstream.

Avoid circular locking dependency by calling
to uobj_alloc_commit() outside of xrcd_tree_mutex lock.

======================================================
WARNING: possible circular locking dependency detected
4.15.0+ #87 Not tainted
------------------------------------------------------
syzkaller401056/269 is trying to acquire lock:
 (&uverbs_dev->xrcd_tree_mutex){+.+.}, at: [<000000006c12d2cd>] uverbs_free_xrcd+0xd2/0x360

but task is already holding lock:
 (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&ucontext->uobjects_lock){+.+.}:
       __mutex_lock+0x111/0x1720
       rdma_alloc_commit_uobject+0x22c/0x600
       ib_uverbs_open_xrcd+0x61a/0xdd0
       ib_uverbs_write+0x7f9/0xef0
       __vfs_write+0x10d/0x700
       vfs_write+0x1b0/0x550
       SyS_write+0xc7/0x1a0
       entry_SYSCALL_64_fastpath+0x1e/0x8b

-> #0 (&uverbs_dev->xrcd_tree_mutex){+.+.}:
       lock_acquire+0x19d/0x440
       __mutex_lock+0x111/0x1720
       uverbs_free_xrcd+0xd2/0x360
       remove_commit_idr_uobject+0x6d/0x110
       uverbs_cleanup_ucontext+0x2f0/0x730
       ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120
       ib_uverbs_close+0xf2/0x570
       __fput+0x2cd/0x8d0
       task_work_run+0xec/0x1d0
       do_exit+0x6a1/0x1520
       do_group_exit+0xe8/0x380
       SyS_exit_group+0x1e/0x20
       entry_SYSCALL_64_fastpath+0x1e/0x8b

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ucontext->uobjects_lock);
                               lock(&uverbs_dev->xrcd_tree_mutex);
                               lock(&ucontext->uobjects_lock);
  lock(&uverbs_dev->xrcd_tree_mutex);

 *** DEADLOCK ***

3 locks held by syzkaller401056/269:
 #0:  (&file->cleanup_mutex){+.+.}, at: [<00000000c9f0c252>] ib_uverbs_close+0xac/0x570
 #1:  (&ucontext->cleanup_rwsem){++++}, at: [<00000000b6994d49>] uverbs_cleanup_ucontext+0xf6/0x730
 #2:  (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730

stack backtrace:
CPU: 0 PID: 269 Comm: syzkaller401056 Not tainted 4.15.0+ #87
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
 dump_stack+0xde/0x164
 ? dma_virt_map_sg+0x22c/0x22c
 ? uverbs_cleanup_ucontext+0x168/0x730
 ? console_unlock+0x502/0xbd0
 print_circular_bug.isra.24+0x35e/0x396
 ? print_circular_bug_header+0x12e/0x12e
 ? find_usage_backwards+0x30/0x30
 ? entry_SYSCALL_64_fastpath+0x1e/0x8b
 validate_chain.isra.28+0x25d1/0x40c0
 ? check_usage+0xb70/0xb70
 ? graph_lock+0x160/0x160
 ? find_usage_backwards+0x30/0x30
 ? cyc2ns_read_end+0x10/0x10
 ? print_irqtrace_events+0x280/0x280
 ? __lock_acquire+0x93d/0x1630
 __lock_acquire+0x93d/0x1630
 lock_acquire+0x19d/0x440
 ? uverbs_free_xrcd+0xd2/0x360
 __mutex_lock+0x111/0x1720
 ? uverbs_free_xrcd+0xd2/0x360
 ? uverbs_free_xrcd+0xd2/0x360
 ? __mutex_lock+0x828/0x1720
 ? mutex_lock_io_nested+0x1550/0x1550
 ? uverbs_cleanup_ucontext+0x168/0x730
 ? __lock_acquire+0x9a9/0x1630
 ? mutex_lock_io_nested+0x1550/0x1550
 ? uverbs_cleanup_ucontext+0xf6/0x730
 ? lock_contended+0x11a0/0x11a0
 ? uverbs_free_xrcd+0xd2/0x360
 uverbs_free_xrcd+0xd2/0x360
 remove_commit_idr_uobject+0x6d/0x110
 uverbs_cleanup_ucontext+0x2f0/0x730
 ? sched_clock_cpu+0x18/0x200
 ? uverbs_close_fd+0x1c0/0x1c0
 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120
 ib_uverbs_close+0xf2/0x570
 ? ib_uverbs_remove_one+0xb50/0xb50
 ? ib_uverbs_remove_one+0xb50/0xb50
 __fput+0x2cd/0x8d0
 task_work_run+0xec/0x1d0
 do_exit+0x6a1/0x1520
 ? fsnotify_first_mark+0x220/0x220
 ? exit_notify+0x9f0/0x9f0
 ? entry_SYSCALL_64_fastpath+0x5/0x8b
 ? entry_SYSCALL_64_fastpath+0x5/0x8b
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 ? time_hardirqs_on+0x27/0x670
 ? time_hardirqs_off+0x27/0x490
 ? syscall_return_slowpath+0x6c/0x460
 ? entry_SYSCALL_64_fastpath+0x5/0x8b
 do_group_exit+0xe8/0x380
 SyS_exit_group+0x1e/0x20
 entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x431ce9

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd

commit 5c2e1c4f926856717f3fd31932e926dc3fe77ebd upstream.

There is no matching lock for this mutex. Git history suggests this is
just a missed remnant from an earlier version of the function before
this locking was moved into uverbs_free_xrcd.

Originally this lock was protecting the xrcd_table_delete()

=====================================
WARNING: bad unlock balance detected!
4.15.0+ #87 Not tainted
-------------------------------------
syzkaller223405/269 is trying to release lock (&uverbs_dev->xrcd_tree_mutex) at:
[<00000000b8703372>] ib_uverbs_close_xrcd+0x195/0x1f0
but there are no more locks to release!

other info that might help us debug this:
1 lock held by syzkaller223405/269:
 #0:  (&uverbs_dev->disassociate_srcu){....}, at: [<000000005af3b960>] ib_uverbs_write+0x265/0xef0

stack backtrace:
CPU: 0 PID: 269 Comm: syzkaller223405 Not tainted 4.15.0+ #87
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
 dump_stack+0xde/0x164
 ? dma_virt_map_sg+0x22c/0x22c
 ? ib_uverbs_write+0x265/0xef0
 ? console_unlock+0x502/0xbd0
 ? ib_uverbs_close_xrcd+0x195/0x1f0
 print_unlock_imbalance_bug+0x131/0x160
 lock_release+0x59d/0x1100
 ? ib_uverbs_close_xrcd+0x195/0x1f0
 ? lock_acquire+0x440/0x440
 ? lock_acquire+0x440/0x440
 __mutex_unlock_slowpath+0x88/0x670
 ? wait_for_completion+0x4c0/0x4c0
 ? rdma_lookup_get_uobject+0x145/0x2f0
 ib_uverbs_close_xrcd+0x195/0x1f0
 ? ib_uverbs_open_xrcd+0xdd0/0xdd0
 ib_uverbs_write+0x7f9/0xef0
 ? cyc2ns_read_end+0x10/0x10
 ? ib_uverbs_open_xrcd+0xdd0/0xdd0
 ? uverbs_devnode+0x110/0x110
 ? cyc2ns_read_end+0x10/0x10
 ? cyc2ns_read_end+0x10/0x10
 ? sched_clock_cpu+0x18/0x200
 __vfs_write+0x10d/0x700
 ? uverbs_devnode+0x110/0x110
 ? kernel_read+0x170/0x170
 ? __fget+0x358/0x5d0
 ? security_file_permission+0x93/0x260
 vfs_write+0x1b0/0x550
 SyS_write+0xc7/0x1a0
 ? SyS_read+0x1a0/0x1a0
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x4335c9

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Protect from command mask overflow

commit 3f802b162dbf4a558ff98986449eddc717826209 upstream.

The command number is not bounds checked against the command mask before it
is shifted, resulting in an ubsan hit. This does not cause malfunction since
the command number is eventually bounds checked, but we can make this ubsan
clean by moving the bounds check to before the mask check.

================================================================================
UBSAN: Undefined behaviour in
drivers/infiniband/core/uverbs_main.c:647:21
shift exponent 207 is too large for 64-bit type 'long long unsigned int'
CPU: 0 PID: 446 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #61
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xde/0x164
? dma_virt_map_sg+0x22c/0x22c
ubsan_epilogue+0xe/0x81
__ubsan_handle_shift_out_of_bounds+0x293/0x2f7
? debug_check_no_locks_freed+0x340/0x340
? __ubsan_handle_load_invalid_value+0x19b/0x19b
? lock_acquire+0x440/0x440
? lock_acquire+0x19d/0x440
? __might_fault+0xf4/0x240
? ib_uverbs_write+0x68d/0xe20
ib_uverbs_write+0x68d/0xe20
? __lock_acquire+0xcf7/0x3940
? uverbs_devnode+0x110/0x110
? cyc2ns_read_end+0x10/0x10
? sched_clock_cpu+0x18/0x200
? sched_clock_cpu+0x18/0x200
__vfs_write+0x10d/0x700
? uverbs_devnode+0x110/0x110
? kernel_read+0x170/0x170
? __fget+0x35b/0x5d0
? security_file_permission+0x93/0x260
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x448e29
RSP: 002b:00007f033f567c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f033f5686bc RCX: 0000000000448e29
RDX: 0000000000000060 RSI: 0000000020001000 RDI: 0000000000000012
RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000056a0 R14: 00000000006e8740 R15: 0000000000000000
================================================================================

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 2dbd5186a39c ("IB/core: IB/core: Allow legacy verbs through extended interfaces")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Protect from races between lookup and destroy of uobjects

commit 6623e3e3cd78020016d3fa42555763178e94ab64 upstream.

The race is between lookup_get_idr_uobject and
uverbs_idr_remove_uobj -> uverbs_uobject_put.

We deliberately do not call sychronize_rcu after the idr_remove in
uverbs_idr_remove_uobj for performance reasons, instead we call
kfree_rcu() during uverbs_uobject_put.

However, this means we can obtain pointers to uobj's that have
already been released and must protect against krefing them
using kref_get_unless_zero.

==================================================================
BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs.isra.2+0x860/0xa00
Read of size 4 at addr ffff88005fda1ac8 by task syz-executor2/441

CPU: 1 PID: 441 Comm: syz-executor2 Not tainted 4.15.0-rc2+ #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0x8d/0xd4
print_address_description+0x73/0x290
kasan_report+0x25c/0x370
? copy_ah_attr_from_uverbs.isra.2+0x860/0xa00
copy_ah_attr_from_uverbs.isra.2+0x860/0xa00
? uverbs_try_lock_object+0x68/0xc0
? modify_qp.isra.7+0xdc4/0x10e0
modify_qp.isra.7+0xdc4/0x10e0
ib_uverbs_modify_qp+0xfe/0x170
? ib_uverbs_query_qp+0x970/0x970
? __lock_acquire+0xa11/0x1da0
ib_uverbs_write+0x55a/0xad0
? ib_uverbs_query_qp+0x970/0x970
? ib_uverbs_query_qp+0x970/0x970
? ib_uverbs_open+0x760/0x760
? futex_wake+0x147/0x410
? sched_clock_cpu+0x18/0x180
? check_prev_add+0x1680/0x1680
? do_futex+0x3b6/0xa30
? sched_clock_cpu+0x18/0x180
__vfs_write+0xf7/0x5c0
? ib_uverbs_open+0x760/0x760
? kernel_read+0x110/0x110
? lock_acquire+0x370/0x370
? __fget+0x264/0x3b0
vfs_write+0x18a/0x460
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x448e29
RSP: 002b:00007f443fee0c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f443fee16bc RCX: 0000000000448e29
RDX: 0000000000000078 RSI: 00000000209f8000 RDI: 0000000000000012
RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000008e98 R14: 00000000006ebf38 R15: 0000000000000000

Allocated by task 1:
kmem_cache_alloc_trace+0x16c/0x2f0
mlx5_alloc_cmd_msg+0x12e/0x670
cmd_exec+0x419/0x1810
mlx5_cmd_exec+0x40/0x70
mlx5_core_mad_ifc+0x187/0x220
mlx5_MAD_IFC+0xd7/0x1b0
mlx5_query_mad_ifc_gids+0x1f3/0x650
mlx5_ib_query_gid+0xa4/0xc0
ib_query_gid+0x152/0x1a0
ib_query_port+0x21e/0x290
mlx5_port_immutable+0x30f/0x490
ib_register_device+0x5dd/0x1130
mlx5_ib_add+0x3e7/0x700
mlx5_add_device+0x124/0x510
mlx5_register_interface+0x11f/0x1c0
mlx5_ib_init+0x56/0x61
do_one_initcall+0xa3/0x250
kernel_init_freeable+0x309/0x3b8
kernel_init+0x14/0x180
ret_from_fork+0x24/0x30

Freed by task 1:
kfree+0xeb/0x2f0
mlx5_free_cmd_msg+0xcd/0x140
cmd_exec+0xeba/0x1810
mlx5_cmd_exec+0x40/0x70
mlx5_core_mad_ifc+0x187/0x220
mlx5_MAD_IFC+0xd7/0x1b0
mlx5_query_mad_ifc_gids+0x1f3/0x650
mlx5_ib_query_gid+0xa4/0xc0
ib_query_gid+0x152/0x1a0
ib_query_port+0x21e/0x290
mlx5_port_immutable+0x30f/0x490
ib_register_device+0x5dd/0x1130
mlx5_ib_add+0x3e7/0x700
mlx5_add_device+0x124/0x510
mlx5_register_interface+0x11f/0x1c0
mlx5_ib_init+0x56/0x61
do_one_initcall+0xa3/0x250
kernel_init_freeable+0x309/0x3b8
kernel_init+0x14/0x180
ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff88005fda1ab0
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 24 bytes inside of
32-byte region [ffff88005fda1ab0, ffff88005fda1ad0)
The buggy address belongs to the page:
page:00000000d5655c19 count:1 mapcount:0 mapping: (null)
index:0xffff88005fda1fc0
flags: 0x4000000000000100(slab)
raw: 4000000000000100 0000000000000000 ffff88005fda1fc0 0000000180550008
raw: ffffea00017f6780 0000000400000004 ffff88006c803980 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88005fda1980: fc fc fb fb fb fb fc fc fb fb fb fb fc fc fb fb
ffff88005fda1a00: fb fb fc fc fb fb fb fb fc fc 00 00 00 00 fc fc
ffff88005fda1a80: fb fb fb fb fc fc fb fb fb fb fc fc fb fb fb fb
ffff88005fda1b00: fc fc 00 00 00 00 fc fc fb fb fb fb fc fc fb fb
ffff88005fda1b80: fb fb fc fc fb fb fb fb fc fc fb fb fb fb fc fc
==================================================================@

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.11
Fixes: 3832125624b7 ("IB/core: Add support for idr types")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: int3496: process id-pin first so that we start with the right status

commit 0434352d3d2e950cf5e743f6062abd87de22f960 upstream.

Some other drivers may be waiting for our extcon to show-up, exiting their
probe methods with -EPROBE_DEFER until we show up.

These drivers will typically get the cable state directly after getting
the extcon, this commit changes the int3496 code to wait for the initial
processing of the id-pin to complete before exiting probe() with 0, which
will cause devices waiting on the defered probe to get reprobed.

This fixes a race where the initial work might still be running while other
drivers were already calling extcon_get_state().

Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PKCS#7: fix certificate blacklisting

commit 29f4a67c17e19314b7d74b8569be935e6c7edf50 upstream.

If there is a blacklisted certificate in a SignerInfo's certificate
chain, then pkcs7_verify_sig_chain() sets sinfo->blacklisted and returns
0.  But, pkcs7_verify() fails to handle this case appropriately, as it
actually continues on to the line 'actual_ret = 0;', indicating that the
SignerInfo has passed verification.  Consequently, PKCS#7 signature
verification ignores the certificate blacklist.

Fix this by not considering blacklisted SignerInfos to have passed
verification.

Also fix the function comment with regards to when 0 is returned.

Fixes: 03bb79315ddc ("PKCS#7: Handle blacklisted certificates")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PKCS#7: fix certificate chain verification

commit 971b42c038dc83e3327872d294fe7131bab152fc upstream.

When pkcs7_verify_sig_chain() is building the certificate chain for a
SignerInfo using the certificates in the PKCS#7 message, it is passing
the wrong arguments to public_key_verify_signature().  Consequently,
when the next certificate is supposed to be used to verify the previous
certificate, the next certificate is actually used to verify itself.

An attacker can use this bug to create a bogus certificate chain that
has no cryptographic relationship between the beginning and end.

Fortunately I couldn't quite find a way to use this to bypass the
overall signature verification, though it comes very close.  Here's the
reasoning: due to the bug, every certificate in the chain beyond the
first actually has to be self-signed (where "self-signed" here refers to
the actual key and signature; an attacker might still manipulate the
certificate fields such that the self_signed flag doesn't actually get
set, and thus the chain doesn't end immediately).  But to pass trust
validation (pkcs7_validate_trust()), either the SignerInfo or one of the
certificates has to actually be signed by a trusted key.  Since only
self-signed certificates can be added to the chain, the only way for an
attacker to introduce a trusted signature is to include a self-signed
trusted certificate.

But, when pkcs7_validate_trust_one() reaches that certificate, instead
of trying to verify the signature on that certificate, it will actually
look up the corresponding trusted key, which will succeed, and then try
to verify the *previous* certificate, which will fail.  Thus, disaster
is narrowly averted (as far as I could tell).

Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: fix NULL dereference when restricting key with unsupported_sig

commit 4b34968e77ad09628cfb3c4a7daf2adc2cefc6e8 upstream.

The asymmetric key type allows an X.509 certificate to be added even if
its signature's hash algorithm is not available in the crypto API.  In
that case 'payload.data[asym_auth]' will be NULL.  But the key
restriction code failed to check for this case before trying to use the
signature, resulting in a NULL pointer dereference in
key_or_keyring_common() or in restrict_link_by_signature().

Fix this by returning -ENOPKG when the signature is unsupported.

Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and
keyctl has support for the 'restrict_keyring' command:

    keyctl new_session
    keyctl restrict_keyring @s asymmetric builtin_trusted
    openssl req -new -sha512 -x509 -batch -nodes -outform der \
        | keyctl padd asymmetric desc @s

Fixes: a511e1af8b12 ("KEYS: Move the point of trust determination to __key_link()")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: fix BUG_ON() when hash algorithm is unsupported

commit 437499eea4291ae9621e8763a41df027c110a1ef upstream.

The X.509 parser mishandles the case where the certificate's signature's
hash algorithm is not available in the crypto API.  In this case,
x509_get_sig_params() doesn't allocate the cert->sig->digest buffer;
this part seems to be intentional.  However,
public_key_verify_signature() is still called via
x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'.

Fix this by making public_key_verify_signature() return -ENOPKG if the
hash buffer has not been allocated.

Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled:

    openssl req -new -sha512 -x509 -batch -nodes -outform der \
        | keyctl padd asymmetric desc @s

Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier")
Reported-by: Paolo Valente <paolo.valente@linaro.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: bcm2835: Set up the rising/falling edge delays

commit fe32a815f05c8568669a062587435e15f9345764 upstream.

We were leaving them in the power on state (or the state the firmware
had set up for some client, if we were taking over from them).  The
boot state was 30 core clocks, when we actually want to sample some
time after (to make sure that the new input bit has actually arrived).

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: must wait for enable

commit fba4adbbf670577e605f9ad306629db6031cd48b upstream.

One I2C bus on my Atom E3845 board has been broken since 4.9.
It has two devices, both declared by ACPI and with built-in drivers.

There are two back-to-back transactions originating from the kernel, one
targeting each device. The first transaction works, the second one locks
up the I2C controller. The controller never recovers.

These kernel logs show up whenever an I2C transaction is attempted after
this failure.
i2c-designware-pci 0000:00:18.3: timeout in disabling adapter
i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready

Waiting for the I2C controller status to indicate that it is enabled
before programming it fixes the issue.

I have tested this patch on 4.14 and 4.15.

Fixes: commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary")
Cc: linux-stable <stable@vger.kernel.org> #4.13+
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: fix cfg80211_beacon_dup

commit bee92d06157fc39d5d7836a061c7d41289a55797 upstream.

gcc-8 warns about some obviously incorrect code:

net/mac80211/cfg.c: In function 'cfg80211_beacon_dup':
net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

From the context, I conclude that we want to copy from beacon into
new_beacon, as we do in the rest of the function.

Cc: stable@vger.kernel.org
Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Drop spurious __unused in struct compat_flock

commit 6ae1756faddefd7494353380ee546dd38c2f97eb upstream.

MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it
has an extra short __unused before pad[4], which combined with alignment
increases the size to 40 bytes compared with struct flock's 36 bytes.

Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to
copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock
struct to userland, which results in corruption of the userland word
after the struct flock when running 32-bit userlands on 64-bit kernels.

This was observed to cause a bus error exception when starting Firefox
on Debian 8 (Jessie).

Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Tested-by: Peter Mamonov <pmamonov@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.13+
Patchwork: https://patchwork.linux-mips.org/patch/18646/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info

commit c39813652700f3df552b6557530f1e5f782dbe2f upstream.

The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.

Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.

Cc: <stable@vger.kernel.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix high memory/reserved memory collision

commit 6ac5a11dc674bc5016ea716e8082fff61f524dc1 upstream.

Xtensa memory initialization code frees high memory pages without
checking whether they are in the reserved memory regions or not. That
results in invalid value of totalram_pages and duplicate page usage by
CMA and highmem. It produces a bunch of BUGs at startup looking like
this:

BUG: Bad page state in process swapper  pfn:70800
page:be60c000 count:0 mapcount:-127 mapping:  (null) index:0x1
flags: 0x80000000()
raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G    B            4.16.0-rc1-00015-g7928b2cbe55b-dirty #23
Stack:
 bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000
 a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000
 a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e
Call Trace:
 [<a1065734>] bad_page+0xac/0xd0
 [<a106578c>] free_pages_check_bad+0x34/0x4c
 [<a1066166>] __free_pages_ok+0xae/0x14c
 [<a1066b58>] __free_pages+0x30/0x64
 [<a1365de5>] init_cma_reserved_pageblock+0x35/0x44
 [<a13682dc>] cma_init_reserved_areas+0xf4/0x148
 [<a10034b8>] do_one_initcall+0x80/0xf8
 [<a1361c16>] kernel_init_freeable+0xda/0x13c
 [<a125b59d>] kernel_init+0x9/0xd0
 [<a1004304>] ret_from_kernel_thread+0xc/0x18

Only free high memory pages that are not reserved.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: boot: Define __ASSEMBLY__ for its.S build

commit 0f9da844d87796ac31b04e81ee95e155e9043132 upstream.

The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.

The failure was:

    Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
    FATAL ERROR: Unable to parse input tree
    /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
    /usr/bin/mkimage Can't add hashes to FIT blob

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig.h: Include compiler types to avoid missed struct attributes

commit 28128c61e08eaeced9cc8ec0e6b5d677b5b94690 upstream.

The header files for some structures could get included in such a way
that struct attributes (specifically __randomize_layout from path.h) would
be parsed as variable names instead of attributes. This could lead to
some instances of a structure being unrandomized, causing nasty GPFs, etc.

This patch makes sure the compiler_types.h header is included in
kconfig.h so that we've always got types and struct attributes defined,
since kconfig.h is included from the compiler command line.

Reported-by: Patrick McLean <chutzpah@gentoo.org>
Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: 3859a271a003 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: don't write garbage into TTBR1_EL1 register

Stable backport commit 173358a49173 ("arm64: kpti: Add ->enable callback
to remap swapper using nG mappings") of upstream commit f992b4dfd58b did
not survive the backporting process unscathed, and ends up writing garbage
into the TTBR1_EL1 register, rather than pointing it to the zero page to
disable translations. Fix that.

Cc: <stable@vger.kernel.org> #v4.14
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: drop outermost socket lock in getsockopt()

commit 01ea306f2ac2baff98d472da719193e738759d93 upstream.

The Syzbot reported a possible deadlock in the netfilter area caused by
rtnl lock, xt lock and socket lock being acquired with a different order
on different code paths, leading to the following backtrace:
Reviewed-by: Xin Long <lucien.xin@gmail.com>
======================================================
WARNING: possible circular locking dependency detected
4.15.0+ #301 Not tainted
------------------------------------------------------
syzkaller233489/4179 is trying to acquire lock:
  (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

but task is already holding lock:
  (&xt[i].mutex){+.+.}, at: [<00000000328553a2>]
xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041

which lock already depends on the new lock.
===

Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), we already acquire the socket lock in
the innermost scope, where needed. In such commit I forgot to remove
the outer-most socket lock from the getsockopt() path, this commit
addresses the issues dropping it now.

v1 -> v2: fix bad subj, added relavant 'fixes' tag

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.22