--- /dev/null
+/****************************************************************************
+ ****************************************************************************
+ ***
+ *** This header was automatically generated from a Linux kernel header
+ *** of the same name, to make information necessary for userspace to
+ *** call into the kernel available to libc. It contains only constants,
+ *** structures, and macros generated from the original header, and thus,
+ *** contains no copyrightable information.
+ ***
+ ****************************************************************************
+ ****************************************************************************/
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA 0
+#define PULL_DWN_CTRL_NA 0
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, .mask_offset = mode_offset, .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, .pull_bit = bit, .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, .pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg = OMAP730_IO_CONF_##reg, .mask_offset = mode_offset, .mask = mode,
+
+#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, .pull_bit = bit, .pull_val = status,
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode, pull_reg, pull_bit, pull_status, pu_pd_reg, pu_pd_status, debug_status) { .name = desc, .debug = debug_status, MUX_REG(mux_reg, mode_offset, mode) PULL_REG(pull_reg, pull_bit, !pull_status) PU_PD_REG(pu_pd_reg, pu_pd_status) },
+
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, pull_bit, pull_status, debug_status) { .name = desc, .debug = debug_status, MUX_REG_730(mux_reg, mode_offset, mode) PULL_REG_730(mux_reg, pull_bit, pull_status) PU_PD_REG(NA, 0) },
+
+#define MUX_CFG_24XX(desc, reg_offset, mode, pull_en, pull_mode, dbg) { .name = desc, .debug = dbg, .mux_reg = reg_offset, .mask = mode, .pull_val = pull_en, .pu_pd_val = pull_mode, },
+
+#define PULL_DISABLED 0
+#define PULL_ENABLED 1
+
+#define PULL_DOWN 0
+#define PULL_UP 1
+
+struct pin_config {
+ char *name;
+ unsigned char busy;
+ unsigned char debug;
+
+ const char *mux_reg_name;
+ const unsigned int mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+
+ const char *pull_name;
+ const unsigned int pull_reg;
+ const unsigned char pull_val;
+ const unsigned char pull_bit;
+
+ const char *pu_pd_name;
+ const unsigned int pu_pd_reg;
+ const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+
+ E2_730_KBR0,
+ J7_730_KBR1,
+ E1_730_KBR2,
+ F3_730_KBR3,
+ D2_730_KBR4,
+ AA20_730_KBR5,
+ V17_730_KBR6,
+ C2_730_KBC0,
+ D3_730_KBC1,
+ E4_730_KBC2,
+ F4_730_KBC3,
+ E3_730_KBC4,
+
+ AA17_730_USB_DM,
+ W16_730_USB_PU_EN,
+ W17_730_USB_VBUSI,
+
+ V19_730_GPIO_15,
+ M19_730_GPIO_77,
+ C21_730_GPIO_121_122,
+ K19_730_GPIO_126,
+ K15_730_GPIO_127,
+
+ P15_730_GPIO_16_17,
+
+ M15_730_GPIO_83,
+ N20_730_GPIO_82,
+ N18_730_GPIO_81,
+ N19_730_GPIO_80,
+ L15_730_GPIO_76,
+
+ UART1_CTS_RTS,
+ OMAP_730_GPIOS_42_43,
+ UART1_TX_RX,
+ OMAP_730_GPIOS_40_41,
+ UART1_USB_RX_TX,
+ UART1_USB_RTS,
+ UART1_USB_CTS
+};
+
+enum omap1xxx_index {
+
+ UART1_TX = 0,
+ UART1_RTS,
+
+ UART2_TX,
+ UART2_RX,
+ UART2_CTS,
+ UART2_RTS,
+
+ UART3_TX,
+ UART3_RX,
+ UART3_CTS,
+ UART3_RTS,
+ UART3_CLKREQ,
+ UART3_BCLK,
+ Y15_1610_UART3_RTS,
+
+ PWT,
+ PWL,
+
+ R18_USB_VBUS,
+ R18_1510_USB_GPIO0,
+ W4_USB_PUEN,
+ W4_USB_CLKO,
+ W4_USB_HIGHZ,
+ W4_GPIO58,
+
+ USB1_SUSP,
+ USB1_SEO,
+ W13_1610_USB1_SE0,
+ USB1_TXEN,
+ USB1_TXD,
+ USB1_VP,
+ USB1_VM,
+ USB1_RCV,
+ USB1_SPEED,
+ R13_1610_USB1_SPEED,
+ R13_1710_USB1_SE0,
+
+ USB2_SUSP,
+ USB2_VP,
+ USB2_TXEN,
+ USB2_VM,
+ USB2_RCV,
+ USB2_SEO,
+ USB2_TXD,
+
+ R18_1510_GPIO0,
+ R19_1510_GPIO1,
+ M14_1510_GPIO2,
+
+ P18_1610_GPIO3,
+ Y15_1610_GPIO17,
+
+ R18_1710_GPIO0,
+ V2_1710_GPIO10,
+ N21_1710_GPIO14,
+ W15_1710_GPIO40,
+
+ MPUIO2,
+ N15_1610_MPUIO2,
+ MPUIO4,
+ MPUIO5,
+ T20_1610_MPUIO5,
+ W11_1610_MPUIO6,
+ V10_1610_MPUIO7,
+ W11_1610_MPUIO9,
+ V10_1610_MPUIO10,
+ W10_1610_MPUIO11,
+ E20_1610_MPUIO13,
+ U20_1610_MPUIO14,
+ E19_1610_MPUIO15,
+
+ MCBSP2_CLKR,
+ MCBSP2_CLKX,
+ MCBSP2_DR,
+ MCBSP2_DX,
+ MCBSP2_FSR,
+ MCBSP2_FSX,
+
+ MCBSP3_CLKX,
+
+ BALLOUT_V8_ARMIO3,
+ N20_HDQ,
+
+ W8_1610_MMC2_DAT0,
+ V8_1610_MMC2_DAT1,
+ W15_1610_MMC2_DAT2,
+ R10_1610_MMC2_DAT3,
+ Y10_1610_MMC2_CLK,
+ Y8_1610_MMC2_CMD,
+ V9_1610_MMC2_CMDDIR,
+ V5_1610_MMC2_DATDIR0,
+ W19_1610_MMC2_DATDIR1,
+ R18_1610_MMC2_CLKIN,
+
+ M19_1610_ETM_PSTAT0,
+ L15_1610_ETM_PSTAT1,
+ L18_1610_ETM_PSTAT2,
+ L19_1610_ETM_D0,
+ J19_1610_ETM_D6,
+ J18_1610_ETM_D7,
+
+ P20_1610_GPIO4,
+ V9_1610_GPIO7,
+ W8_1610_GPIO9,
+ N20_1610_GPIO11,
+ N19_1610_GPIO13,
+ P10_1610_GPIO22,
+ V5_1610_GPIO24,
+ AA20_1610_GPIO_41,
+ W19_1610_GPIO48,
+ M7_1610_GPIO62,
+ V14_16XX_GPIO37,
+ R9_16XX_GPIO18,
+ L14_16XX_GPIO49,
+
+ V19_1610_UWIRE_SCLK,
+ U18_1610_UWIRE_SDI,
+ W21_1610_UWIRE_SDO,
+ N14_1610_UWIRE_CS0,
+ P15_1610_UWIRE_CS3,
+ N15_1610_UWIRE_CS1,
+
+ U19_1610_SPIF_SCK,
+ U18_1610_SPIF_DIN,
+ P20_1610_SPIF_DIN,
+ W21_1610_SPIF_DOUT,
+ R18_1610_SPIF_DOUT,
+ N14_1610_SPIF_CS0,
+ N15_1610_SPIF_CS1,
+ T19_1610_SPIF_CS2,
+ P15_1610_SPIF_CS3,
+
+ L3_1610_FLASH_CS2B_OE,
+ M8_1610_FLASH_CS2B_WE,
+
+ MMC_CMD,
+ MMC_DAT1,
+ MMC_DAT2,
+ MMC_DAT0,
+ MMC_CLK,
+ MMC_DAT3,
+
+ M15_1710_MMC_CLKI,
+ P19_1710_MMC_CMDDIR,
+ P20_1710_MMC_DATDIR0,
+
+ W9_USB0_TXEN,
+ AA9_USB0_VP,
+ Y5_USB0_RCV,
+ R9_USB0_VM,
+ V6_USB0_TXD,
+ W5_USB0_SE0,
+ V9_USB0_SPEED,
+ V9_USB0_SUSP,
+
+ W9_USB2_TXEN,
+ AA9_USB2_VP,
+ Y5_USB2_RCV,
+ R9_USB2_VM,
+ V6_USB2_TXD,
+ W5_USB2_SE0,
+
+ R13_1610_UART1_TX,
+ V14_16XX_UART1_RX,
+ R14_1610_UART1_CTS,
+ AA15_1610_UART1_RTS,
+ R9_16XX_UART2_RX,
+ L14_16XX_UART3_RX,
+
+ I2C_SCL,
+ I2C_SDA,
+
+ F18_1610_KBC0,
+ D20_1610_KBC1,
+ D19_1610_KBC2,
+ E18_1610_KBC3,
+ C21_1610_KBC4,
+ G18_1610_KBR0,
+ F19_1610_KBR1,
+ H14_1610_KBR2,
+ E20_1610_KBR3,
+ E19_1610_KBR4,
+ N19_1610_KBR5,
+
+ T20_1610_LOW_PWR,
+
+ V5_1710_MCLK_ON,
+ V5_1710_MCLK_OFF,
+ R10_1610_MCLK_ON,
+ R10_1610_MCLK_OFF,
+
+ P11_1610_CF_CD2,
+ R11_1610_CF_IOIS16,
+ V10_1610_CF_IREQ,
+ W10_1610_CF_RESET,
+ W11_1610_CF_CD1,
+};
+
+enum omap24xx_index {
+
+ M19_24XX_I2C1_SCL,
+ L15_24XX_I2C1_SDA,
+ J15_24XX_I2C2_SCL,
+ H19_24XX_I2C2_SDA,
+
+ W19_24XX_SYS_NIRQ,
+
+ W14_24XX_SYS_CLKOUT,
+
+ L3_GPMC_WAIT0,
+ N7_GPMC_WAIT1,
+ M1_GPMC_WAIT2,
+ P1_GPMC_WAIT3,
+
+ Y15_24XX_MCBSP2_CLKX,
+ R14_24XX_MCBSP2_FSX,
+ W15_24XX_MCBSP2_DR,
+ V15_24XX_MCBSP2_DX,
+
+ M21_242X_GPIO11,
+ AA10_242X_GPIO13,
+ AA6_242X_GPIO14,
+ AA4_242X_GPIO15,
+ Y11_242X_GPIO16,
+ AA12_242X_GPIO17,
+ AA8_242X_GPIO58,
+ Y20_24XX_GPIO60,
+ W4__24XX_GPIO74,
+ M15_24XX_GPIO92,
+ V14_24XX_GPIO117,
+
+ V4_242X_GPIO49,
+ W2_242X_GPIO50,
+ U4_242X_GPIO51,
+ V3_242X_GPIO52,
+ V2_242X_GPIO53,
+ V6_242X_GPIO53,
+ T4_242X_GPIO54,
+ Y4_242X_GPIO54,
+ T3_242X_GPIO55,
+ U2_242X_GPIO56,
+
+ AA10_242X_DMAREQ0,
+ AA6_242X_DMAREQ1,
+ E4_242X_DMAREQ2,
+ G4_242X_DMAREQ3,
+ D3_242X_DMAREQ4,
+ E3_242X_DMAREQ5,
+
+ P20_24XX_TSC_IRQ,
+
+ K15_24XX_UART3_TX,
+ K14_24XX_UART3_RX,
+
+ G19_24XX_MMC_CLKO,
+ H18_24XX_MMC_CMD,
+ F20_24XX_MMC_DAT0,
+ H14_24XX_MMC_DAT1,
+ E19_24XX_MMC_DAT2,
+ D19_24XX_MMC_DAT3,
+ F19_24XX_MMC_DAT_DIR0,
+ E20_24XX_MMC_DAT_DIR1,
+ F18_24XX_MMC_DAT_DIR2,
+ E18_24XX_MMC_DAT_DIR3,
+ G18_24XX_MMC_CMD_DIR,
+ H15_24XX_MMC_CLKI,
+
+ T19_24XX_KBR0,
+ R19_24XX_KBR1,
+ V18_24XX_KBR2,
+ M21_24XX_KBR3,
+ E5__24XX_KBR4,
+ M18_24XX_KBR5,
+ R20_24XX_KBC0,
+ M14_24XX_KBC1,
+ H19_24XX_KBC2,
+ V17_24XX_KBC3,
+ P21_24XX_KBC4,
+ L14_24XX_KBC5,
+ N19_24XX_KBC6,
+
+ B3__24XX_KBR5,
+ AA4_24XX_KBC2,
+ B13_24XX_KBC6,
+};
+
+#endif
OSDN Git Service
