#include "../device.h"
#include "../event.h"
+#include "../disk.h"
+#include "../harddisk.h"
#include "../i8253.h"
#include "../i8255.h"
#include "../i8259.h"
//#include "../pcpr201.h"
#include "../prnfile.h"
#include "../rp5c01.h"
-//#include "../sasi.h"
+#include "../scsi_hdd.h"
+#include "../scsi_host.h"
#include "../upd71071.h"
#include "../ym2203.h"
#include "../z80pio.h"
#include "mouse.h"
#include "printer.h"
#include "reset.h"
+#include "sasi.h"
#include "serial.h"
#include "sysport.h"
// initialize
// ----------------------------------------------------------------------------
-VM::VM(EMU* parent_emu) : emu(parent_emu)
+VM::VM(EMU* parent_emu) : VM_TEMPLATE(parent_emu)
{
// create devices
first_device = last_device = NULL;
pcm = new PCM1BIT(this, emu);
rtc = new RP5C01(this, emu); // RP-5C15
-// sasi = new SASI(this, emu);
+ sasi_host = new SCSI_HOST(this, emu);
+ for(int i = 0; i < USE_HARD_DISK; i++) {
+ sasi_hdd[i] = new SASI_HDD(this, emu);
+ sasi_hdd[i]->set_device_name(_T("SASI Hard Disk Drive #%d"), i + 1);
+ sasi_hdd[i]->scsi_id = i;
+ sasi_hdd[i]->set_disk_handler(0, new HARDDISK(emu));
+ sasi_hdd[i]->set_context_interface(sasi_host);
+ sasi_hdd[i]->bytes_per_sec = 32 * 1024; // 32KB/s
+ sasi_host->set_context_target(sasi_hdd[i]);
+ }
dma = new UPD71071(this, emu);
opn = new YM2203(this, emu);
pio1 = new Z80PIO(this, emu);
mouse = new MOUSE(this, emu);
printer = new PRINTER(this, emu);
rst = new RESET(this, emu);
+ sasi = new SASI(this, emu);
serial = new SERIAL(this, emu);
sysport = new SYSPORT(this, emu);
not_busy->set_context_out(pic, SIG_I8259_CHIP1 | SIG_I8259_IR1, 1);
rtc->set_context_alarm(pic, SIG_I8259_CHIP1 | SIG_I8259_IR2, 1);
rtc->set_context_pulse(opn, SIG_YM2203_PORT_B, 8);
-// sasi->set_context_drq(dma, SIG_UPD71071_CH0, 1);
-// sasi->set_context_irq(pic, SIG_I8259_CHIP0 | SIG_I8259_IR4, 1);
+ sasi_host->set_context_irq(sasi, SIG_SASI_IRQ, 1);
+ sasi_host->set_context_drq(sasi, SIG_SASI_DRQ, 1);
dma->set_context_memory(memory);
-// dma->set_context_ch0(sasi);
+ dma->set_context_ch0(sasi);
dma->set_context_ch1(fdc);
dma->set_context_tc(pic, SIG_I8259_CHIP0 | SIG_I8259_IR3, 1);
opn->set_context_irq(pic, SIG_I8259_CHIP1 | SIG_I8259_IR7, 1);
} else {
printer->set_context_prn(dummy);
}
+ sasi->set_context_host(sasi_host);
+ sasi->set_context_dma(dma);
+ sasi->set_context_pic(pic);
serial->set_context_sio(sio);
sysport->set_context_pit(pit);
sysport->set_context_sio(sio);
for(uint32_t p = 0xae; p <= 0x1fae; p += 0x100) {
io->set_iomap_single_w(p, crtc);
}
-// io->set_iomap_single_rw(0xaf, sasi);
+ io->set_iomap_range_rw(0xa4, 0xa5, sasi);
io->set_iomap_range_rw(0xb0, 0xb3, serial);
io->set_iomap_single_r(0xbe, sysport);
io->set_iomap_range_rw(0xc8, 0xc9, opn);
io->set_iomap_single_rw(0x274, memory);
// initialize all devices
+#if defined(__GIT_REPO_VERSION)
+ strncpy(_git_revision, __GIT_REPO_VERSION, sizeof(_git_revision) - 1);
+#endif
for(DEVICE* device = first_device; device; device = device->next_device) {
device->initialize();
}
delete device;
device = next_device;
}
+ for(int drv = 0; drv < USE_HARD_DISK; drv++) {
+ if(!(config.last_hard_disk_path[drv][0] != _T('\0') && FILEIO::IsFileExisting(config.last_hard_disk_path[drv]))) {
+ create_local_path(config.last_hard_disk_path[drv], _MAX_PATH, _T("SASI%d.DAT"), drv);
+ }
+ }
}
DEVICE* VM::get_device(int id)
void VM::open_floppy_disk(int drv, const _TCHAR* file_path, int bank)
{
fdc->open_disk(drv, file_path, bank);
+
+ if(fdc->get_media_type(drv) == MEDIA_TYPE_2DD) {
+ if(fdc->get_drive_type(drv) == DRIVE_TYPE_2D) {
+ fdc->set_drive_type(drv, DRIVE_TYPE_2DD);
+ }
+ } else if(fdc->get_media_type(drv) == MEDIA_TYPE_2D) {
+ if(fdc->get_drive_type(drv) == DRIVE_TYPE_2DD) {
+ fdc->set_drive_type(drv, DRIVE_TYPE_2D);
+ }
+ }
}
void VM::close_floppy_disk(int drv)
return fdc->read_signal(0);
}
+void VM::open_hard_disk(int drv, const _TCHAR* file_path)
+{
+ if(drv < USE_HARD_DISK) {
+ sasi_hdd[drv]->open(0, file_path, 1024);
+ }
+}
+
+void VM::close_hard_disk(int drv)
+{
+ if(drv < USE_HARD_DISK) {
+ sasi_hdd[drv]->close(0);
+ }
+}
+
+bool VM::is_hard_disk_inserted(int drv)
+{
+ if(drv < USE_HARD_DISK) {
+ return sasi_hdd[drv]->mounted(0);
+ }
+ return false;
+}
+
+uint32_t VM::is_hard_disk_accessed()
+{
+ uint32_t status = 0;
+
+ for(int drv = 0; drv < USE_HARD_DISK; drv++) {
+ if(sasi_hdd[drv]->accessed(0)) {
+ status |= 1 << drv;
+ }
+ }
+ return status;
+}
+
bool VM::is_frame_skippable()
{
return event->is_frame_skippable();
}
}
-#define STATE_VERSION 4
+#define STATE_VERSION 5
#include "../../statesub.h"
+#include "../../qt/gui/csp_logger.h"
+extern CSP_Logger DLL_PREFIX_I *csp_logger;
void VM::decl_state(void)
{
- state_entry = new csp_state_utils(STATE_VERSION, 0, (_TCHAR *)(_T("CSP::MZ_2800_HEAD")));
+ state_entry = new csp_state_utils(STATE_VERSION, 0, (_TCHAR *)(_T("CSP::MZ_2800_HEAD")), csp_logger);
for(DEVICE* device = first_device; device; device = device->next_device) {
device->decl_state();
}