! ----------------------------------------------
! FastForth INFO
! ----------------------------------------------
-INI_THREAD=\$1800! .word THREADS
-TERMBRW_RST=\$1802! .word TERMBRW_RST
-TERMMCTLW_RST=\$1804! .word TERMMCTLW_RST
-FREQ_KHZ=\$1806! .word FREQUENCY
-
-SAVE_SYSRSTIV=\$1808! to enable SYSRSTIV read
-LPM_MODE=\$180A! LPM0+GIE is the default mode
-INIDP=\$180C! define RST_STATE, init by wipe
-INIVOC=\$180E! define RST_STATE, init by wipe
-VERSION=\$1810!
+FREQ_KHZ=\$1800! FREQUENCY (in kHz)
+TERMBRW_RST=\$1802! TERMBRW_RST
+TERMMCTLW_RST=\$1804! TERMMCTLW_RST
+I2CSLAVEADR=\$1802! I2C_SLAVE address
+I2CSLAVEADR1=\$1804!
+LPM_MODE=\$1806! LPM_MODE value, LPM0+GIE is the default value
+RSTIV_MEM=\$1808! SYSRSTIV memory, set to -1 to do Deep RESET
+RST_DP=\$180A! RST value for DP
+RST_VOC=\$180C! RST value for VOClink
+VERSION=\$180E!
+THREADS=\$1810! THREADS
KERNEL_ADDON=\$1812!
-RXON=\$1814!
-RXOFF=\$1816!
-ReadSectorWX=\$1818! call with W = SectorLO X = SectorHI
-WriteSectorWX=\$181A! call with W = SectorLO X = SectorHI
-TERMINAL_INT=\$181C! value for TERMINAL vector
+
+WIPE_INI_=\$1814! MOV #WIPE_INI,X
+WIPE_COLD=\$1814! WIPE value for PFA_COLD
+WIPE_INI_FORTH=\$1816! WIPE value for PFA_INI_FORTH
+WIPE_SLEEP=\$1818! WIPE value for PFA_SLEEP
+WIPE_WARM=\$181A! WIPE value for PFA_WARM
+WIPE_TERM_INT=\$181C! WIPE value for TERMINAL vector
+WIPE_DP=\$182E! WIPE value for RST_DP
+WIPE_VOC=\$1820! WIPE value for RST_VOC
+
+INI_FORTH_INI=\$1822! MOV #INI_FORTH_INI,X \ >BODY instruction of INI_FORTH subroutine
+INIT_ACCEPT=\$1822! WIPE value for PFAACCEPT
+INIT_CR=\$1824! WIPE value for PFACR
+INIT_EMIT=\$1826! FORTH value for PFAEMIT
+INIT_KEY=\$1828! WIPE value for PFAKEY
+INIT_CIB=\$182A! WIPE value for CIB_ADR
+HALF_FORTH_INI=\$182C! to preserve the state of DEFERed words, used by user INI_SOFT_APP as:
+! ADD #4,0(RSP) \ skip INI_FORTH >BODY instruction "MOV #INI_FORTH_INI,X"
+! MOV #HALF_FORTH_INI,X \ replace it by "MOV #HALF_FORTH_INI,X"
+! MOV @RSP+,PC \ then RET
+INIT_DOCOL=\$182C! FORTH value for rDOCOL (R4)
+INIT_DODOES=\$182E! FORTH value for rDODOES (R5)
+INIT_DOCON=\$1830! FORTH value for rDOCON (R6)
+INIT_DOVAR=\$1832! FORTH value for rDOVAR (R7)
+INIT_CAPS=\$1834! FORTH value for CAPS
+INIT_BASE=\$1836! FORTH value for BASE
+
+ABORT_ADR=\$1838! ABORT address
+QUIT4_ADR=\$183A! QUIT4 used by BOOTLOADER
+! free EPROM
! ---------------------------------------
! FAT16 FileSystemInfos
! ---------------------------------------
-FATtype=\$182C!
-BS_FirstSectorL=\$182E!
-BS_FirstSectorH=\$1830!
-OrgFAT1=\$1832!
-FATSize=\$1834!
-OrgFAT2=\$1836!
-OrgRootDir=\$1838!
-OrgClusters=\$183A! Sector of Cluster 0
-SecPerClus=\$183C!
+FATtype=\$185A!
+BS_FirstSectorL=\$185C!
+BS_FirstSectorH=\$185E!
+OrgFAT1=\$1860!
+FATSize=\$1862!
+OrgFAT2=\$1864!
+OrgRootDir=\$1866!
+OrgClusters=\$1868! Sector of Cluster 0
+SecPerClus=\$186A!
! ---------------------------------------
! SD command
! ---------------------------------------
-SD_CMD_FRM=\$183E! 6 bytes SD_CMDx inverted frame \${CRC,ll,LL,hh,HH,CMD}
-SD_CMD_FRM0=\$183E! CRC:ll word access
-SD_CMD_FRM1=\$183F! ll byte access
-SD_CMD_FRM2=\$1840! LL:hh word access
-SD_CMD_FRM3=\$1841! hh byte access
-SD_CMD_FRM4=\$1842! HH:CMD word access
-SD_CMD_FRM5=\$1843! CMD byte access
-SectorL=\$1844! 2 words
-SectorH=\$1846!
+SD_CMD_FRM=\$186C! 6 bytes SD_CMDx inverted frame \${CRC,ll,LL,hh,HH,CMD}
+SD_CMD_FRM0=\$186C! CRC:ll word access
+SD_CMD_FRM1=\$186D! ll byte access
+SD_CMD_FRM2=\$186E! LL:hh word access
+SD_CMD_FRM3=\$186F! hh byte access
+SD_CMD_FRM4=\$1870! HH:CMD word access
+SD_CMD_FRM5=\$1871! CMD byte access
+SectorL=\$1872! 2 words
+SectorH=\$1874!
! ---------------------------------------
! BUFFER management
! ---------------------------------------
-BufferPtr=\$1848!
-BufferLen=\$184A!
+BufferPtr=\$1876!
+BufferLen=\$1878!
! ---------------------------------------
! FAT entry
! ---------------------------------------
-ClusterL=\$184C! 16 bits wide (FAT16)
-ClusterH=\$184E! 16 bits wide (FAT16)
-NewClusterL=\$1850! 16 bits wide (FAT16)
-NewClusterH=\$1852! 16 bits wide (FAT16)
-CurFATsector=\$1854!
+ClusterL=\$187A! 16 bits wide (FAT16)
+ClusterH=\$187C! 16 bits wide (FAT16)
+NewClusterL=\$187E! 16 bits wide (FAT16)
+NewClusterH=\$1880! 16 bits wide (FAT16)
+CurFATsector=\$1882!
! ---------------------------------------
! DIR entry
! ---------------------------------------
-DIRclusterL=\$1856! contains the Cluster of current directory ; 1 if FAT16 root directory
-DIRclusterH=\$1858! contains the Cluster of current directory ; 1 if FAT16 root directory
-EntryOfst=\$185A!
+DIRclusterL=\$1884! contains the Cluster of current directory ; 1 if FAT16 root directory
+DIRclusterH=\$1886! contains the Cluster of current directory ; 1 if FAT16 root directory
+EntryOfst=\$1888!
! ---------------------------------------
! Handle Pointer
! ---------------------------------------
-CurrentHdl=\$185C! contains the address of the last opened file structure, or 0
+CurrentHdl=\$188A! contains the address of the last opened file structure, or 0
! ---------------------------------------
! Load file operation
! ---------------------------------------
-pathname=\$185E! address of pathname string
-EndOfPath=\$1860!
+pathname=\$188C! address of pathname string
+EndOfPath=\$188E!
! ---------------------------------------
! Handle structure
HDLW_PrevORG=26! previous ORG
!OpenedFirstFile ; "openedFile" structure
-HandleMax=5!
+HandleMax=4!
HandleLenght=28!
-FirstHandle=\$1862!
-HandleEnd=\$18EE!
-
-SD_END=\$18EE!
-SD_LEN=\$C2!
+FirstHandle=\$1890!
+HandleEnd=\$1900!
-!SD_card Input Buffer = PAD
-SDIB_I2CADR=\$1CE0!
-SDIB_I2CCNT=\$1CE2!
-SDIB_ORG=\$1CE4!
+SD_END=\$1900!
+SD_LEN=\$A6!
! ============================================
! FRAM TLV
TIB_LEN=\#84! bytes
HOLD_SIZE=\#34! bytes
+!SD_card Input Buffer = PAD
+SDIB_I2CADR=\$1CE0!
+SDIB_I2CCNT=\$1CE2!
+SDIB_ORG=\$1CE4!
+SDIB_LEN=\$54!
+
! ---------------------------------------
! FastForth RAM memory map (= 1k)
! ---------------------------------------
MAIN_LEN=\$3E00! 15.5 k FRAM
! ----------------------------------------------
-SLEEP=\$C200!
-BODYSLEEP=\$C204!
-LIT=\$C20E!
-NEXT_ADR=\$C216!
-XSQUOTE=\$C218!
-HEREADR=\$C22C!
-QTBRAN=\$C238!
-BRAN=\$C23E!
-QFBRAN=\$C242!
-SKIPBRAN=\$C248!
-XDO=\$C24C!
-XPLOOP=\$C25C!
-XLOOP=\$C26E!
-MUSMOD=\$C274! 32/16 unsigned division
-MDIV1=\$C28E! input for 48/16 unsigned division
-SETIB=\$C2BA! Set Input Buffer with org len values, reset >IN
-REFILL=\$C2CA! accept one line from input and leave org len of input buffer
-CIB_ADR=\$C2D8! contents currently TIB_ORG; may be redirected to SDIB_ORG
-XDODOES=\$C2E2! restore rDODOES: MOV #XDODOES,rDODOES
-XDOCON=\$C2F0! restore rDOCON: MOV #XDOCON,rDOCON
-XDOCOL=\$C2FC! restore rDOCOL: MOV #XDOCOL,rDOCOL only for DTC model = 1
-
-! to find DTC value, download \MSP430-FORTH\FastForthSpecs.4th
-! if DTC = 1, restore rDOCOL as this : MOV #xdocol,rDOCOL
-! if DTC = 2, restore rDOCOL as this : MOV #EXIT,rDOCOL
-! if DTC = 3, nothing to do, R7 is free for use.
+SLEEP=\$C200! CODE_WITHOUT_RETURN: CPU shutdown
+LIT=\$C20A! CODE compiled by LITERAL
+XSQUOTE=\$C214! CODE compiled by S" and S_
+HEREXEC=\$C228! CODE HERE and BEGIN execute address
+QFBRAN=\$C234! CODE compiled by IF UNTIL
+BRAN=\$C23A! CODE compiled by ELSE REPEAT AGAIN
+NEXT_ADR=\$C23C! CODE NEXT instruction (MOV @IP+,PC)
+XDO=\$C23E! CODE compiled by DO
+XPLOOP=\$C24E! CODE compiled by +LOOP
+XLOOP=\$C260! CODE compiled by LOOP
+MUSMOD=\$C266! ASM 32/16 unsigned division, used by ?NUMBER, UM/MOD
+MDIV1DIV2=\$C278! ASM input for 48/16 unsigned division with DVDhi=0, see DOUBLE M*/
+MDIV1=\$C280! ASM input for 48/16 unsigned division, see DOUBLE M*/
+RET_ADR=\$C2AA! ASM content of INI_FORTH_PFA and MARKER+8 definitions,
+SETIB=\$C2AC! CODE Set Input Buffer with org & len values, reset >IN pointer
+REFILL=\$C2BC! CODE accept one line from input and leave org len of input buffer
+CIB_ADR=\$C2CA! [CIB_ADR] = TIB_ORG by default; may be redirected to SDIB_ORG
+XDODOES=\$C2D4! restore rDODOES: MOV #XDODOES,rDODOES
+XDOCON=\$C2E2! restore rDOCON: MOV #XDOCON,rDOCON
+XDOVAR=\$C2EE! restore rDOVAR: MOV #XDOVAR,rDOVAR
+!to find DTC value, download \MSP430-FORTH\FF_SPECS.4th
+!XDOCOL=TYPE\+\-16 if DTC = 1, restore rDOCOL as this: MOV #TYPE+-16,rDOCOL
+!XDOCOL=\#S\+16 if DTC = 2, restore rDOCOL as this: MOV ##S+16,rDOCOL
+! if DTC = 3, nothing to do, R7 is free for use.
+INI_FORTH=\$C2F8! CODE_WITHOUT_RETURN common part of RST and QABORT, starts FORTH engine
+QABORT=\$C32A! CODE_WITHOUT_RETURN run-time part of ABORT"
+3DROP=\$C330! CODE
+ABORT_TERM=\$C336! CODE_WITHOUT_RETURN, called by QREVEAL and INTERPRET
+!-------------------------------------------------------------------------------
+UART_COLD_TERM=\$C394! ASM, content of COLD_PFA by default
+UART_INIT_TERM=\$C39C! ASM, content of WARM_PFA by default
+UART_RXON=\$C3C6! ASM, content of SLEEP_PFA by default
+UART_RXOFF=\$C3C8! ASM, called by ACCEPT before RX char LF.
+!-------------------------------------------------------------------------------
+I2C_COLD_TERM=\$C3B4! ASM, content of COLD_PFA by default
+I2C_INIT_TERM=\$C38A! ASM, content of WARM_PFA by default
+I2C_RXON=\$C3B6! ASM, content of SLEEP_PFA by default
+I2C_CTRL_CH=\$C3B8! ASM, used as is: MOV.B #CTRL_CHAR,Y
+! CALL #I2C_CTRL_CH
+!-------------------------------------------------------------------------------
+
! ----------------------------------------------
! Interrupt Vectors and signatures - MSP430FR5738
! ----------------------------------------------
RTC_VEC=\$FFCE!
P4_VEC=\$FFD0!
P3_VEC=\$FFD2!
-TB2_x_VEC=\$FFD4! All others
+TB2_X_VEC=\$FFD4! All others
TB2_0_VEC=\$FFD6! only CCIFG0
P2_VEC=\$FFD8!
-TB1_x_VEC=\$FFDA! All others
+TB1_X_VEC=\$FFDA! All others
TB1_0_VEC=\$FFDC! only CCIFG0
P1_VEC=\$FFDE!
-TA1_x_VEC=\$FFE0! All others
+TA1_X_VEC=\$FFE0! All others
TA1_0_VEC=\$FFE2! only CCIFG0
DMA_VEC=\$FFE4!
-!eUSCI_A1_VEC=\$FFE6!
-TA0_x_VEC=\$FFE8! All others
+!EUSCI_A1_VEC=\$FFE6!
+TA0_X_VEC=\$FFE8! All others
TA0_0_VEC=\$FFEA! only CCIFG0
ADC10_B_VEC=\$FFEC!
-eUSCI_B0_VEC=\$FFEE!
-eUSCI_A0_VEC=\$FFF0!
-TERM_VEC=\$FFF0!
+EUSCI_B0_VEC=\$FFEE!
+EUSCI_A0_VEC=\$FFF0!
WDT_VEC=\$FFF2!
-TB0_x_VEC=\$FFF4! All others
+TB0_X_VEC=\$FFF4! All others
TB0_0_VEC=\$FFF6! only CCIFG0
COMP_D_VEC=\$FFF8!
USER_NMI_VEC=\$FFFA!
OSDN Git Service
