Build Guide for HandBrake svn2591 on Mac OS X ********************************************* Table of Contents ***************** 1 Introduction 2 Prerequisites 3 QuickStart 4 Overview 5 Building via Terminal 5.1 Checkout Sources 5.2 Configure 5.3 Build 5.4 Make Targets 5.4.1 Global 5.4.2 General Modules 5.4.3 Contrib Modules 5.4.4 Contrib Touch and Untouch 5.4.5 Contrib Aggregates 5.5 Customizing Make 5.6 Universal Binaries 6 Building via Xcode.app 6.1 Checkout Sources 6.2 Build 6.3 External Targets 6.4 User-Defined Settings 7 Troubleshooting Appendix A Project Repository Details 1 Introduction ************** This guide documents the recommended process to build HandBrake on Mac OS X hosts from the official source-code repository. Building from any other source is not supported. 2 Prerequisites *************** Building on Mac OS X is well supported. It is the reference platform for HandBrake. The following are the recommended specifications for this platform; but is not necessarily the only configuration that is possible: * Mac Intel hardware * Mac OS X 10.5.7 * Xcode-3.1.2 * gcc 4.0.1 (Apple Inc. build 5490) * yasm 0.8.0.2194 (for i386 and x86_64 architectures) Note: It is recommended to use the platform distribution's bundled compiler for maximum C++ compatibility. If you build with a custom compiler it will likely introduce non-standard runtime requirements. There are of course many valid reasons to build with unbundled compilers, but be aware it is generally unsupported and left as an exercise to the reader. The following general tools are used on various platforms and it is recommended you use these versions or similar: * subversion - 1.6.2 * python - Python 2.4.6 * curl - curl 7.19.4 (or wget) * m4 - GNU M4 1.4.6 * make - GNU Make 3.81 * patch - Patch 2.5.8 * tar - GNU tar 1.15.1 * wget - GNU Wget 1.11.4 (or curl) 3 QuickStart ************ This chapter is for building from a terminal/shell environment in as few commands as possible. Upon completion of the following commands you should have a fresh build of HandBrake. Further instructions are available beginning with *Note overview:: which describes procedures suitable for repeating builds. This chapter should be skipped by those seeking more than a minimalist build. svn checkout svn://svn.handbrake.fr/HandBrake/trunk hb-trunk cd hb-trunk ./configure --launch The special option `--launch' selects launch mode and performs the following steps: * assert scratch directory `build/' does not exist * create scratch directory `build/' * change to directory `build/' * launch `make' * capture build output to `build/log/build.txt' * echo build output * print elapsed time * indicate if build ultimately succeeded or failed 4 Overview ********** The two general methods to build on Mac OS X are from terminal or Xcode.app. The preferred method for automated and repeatable builds is to use the terminal. Otherwise the choice is generally up to the individual. To be extra clear, building from the terminal by default actually invokes `xcodebuild' to build the very same targets contained in the Xcode project. Think of it as building with Xcode but without the GUI. 5 Building via Terminal *********************** 5.1 Checkout Sources ==================== Checkout HandBrake from the official source-code repository. svn checkout svn://svn.handbrake.fr/HandBrake/trunk hb-trunk cd hb-trunk Sources are checked out from the `trunk' branch. This document was generated from that very branch, and for example purposes, we will use exactly the same branch. If you have write-access to the repository, then you may add the appropriate login/password information as needed. It is recommended to use Subversion 1.5.0 or higher. Lower versions should also work. 5.2 Configure ============= Configure the build system. ./configure Configure will automatically create a scratch build directory `build' unless you use GNU-style build procedures and first `cd' to a directory other than top-level source. Additionally you may use `--build' to specify the directory. The name of the directory is arbitrary but it is recommended to use something which indicates transient files which are not checked into the repository. The `configure' utility accepts many options. It is recommended that you specify `--help' for the complete list of options. The following options are also documented here: `--help' List available options. `--src=DIR' Specify top-level source directory for HandBrake sources. `--build=DIR' Specify destination directory for final product install. The default is to use either `build' if in the top-level source directory, otherwise `.' `--prefix=DIR' Specify destination directory for final product install. This defaults to a reasonable platform-specific value. `--launch' All-in-one option which launches the build and logs output automatically. Useful for novices and quick-start procedures. `--disable-xcode' Disable shunting the build through `xcodebuild'. If this option is applied, `HandBrakeCLI' will be produced in a similar fashion as it is on other platforms; sans Xcode and the Cocoa application will not be produced. Mac OS X only. `--disable-gtk' Disable building the GTK GUI on applicable platforms such as Linux. `--debug=MODE' Select debug mode. Must be one of `none', `min', `std', `max'. This generally maps to gcc options `-g0', `-g1', `-g2', `-g3'. `--optimize=MODE' Select optimize mode. Must be one of `none', `speed', `size'. This generally maps to gcc options `-g0', `-O0', `-O3', `-Os'. `--arch=MODE' Select build architecture. The available architectures vary by platform. Most platforms support exactly one architecture except Mac OS X which has support for various universal binary architectures. The available choices are hard-coded per platform and no sanity checks for the required tools are performed. Clean-room procedures dictate that when certain factors change, old builds should be scrapped and new builds configured. This is the main reason for requiring a scratch directory; to promote consistent, reliable and clean software builds. The following is a short list of some of the reasons why someone may choose to scrap an existing build: * configure with different options * subversion working dir is updated and you want configure to re-evaluate working dir metadata. * build corruption is suspected There are generally two methods for scrapping a build. The `build' directory can be recursively removed which has the effect of loosing your existing configuration but does guarantee no residuals are left behind. The other method is to ask the build system to perform an `make xclean'. This is known to work well but will leave empty directories behind. However, the configuration is left intact. 5.3 Build ========= Build main product. All necessary dependencies are also built if required. make Parallel builds may optionally be enabled. Be aware that while a parallel build may save time on systems with additional cores, the output is often mixed, overlapped and sometimes even corrupted with binary characters. Thus if you experience a build issue, you should clean and redo the build in default serial mode to produce a readable log. The following command allows for up to 4 concurrent jobs via make: make -j4 5.4 Make Targets ================ The build system supports passing many kinds of targets some of which become very useful in normal development cycles. The targets by convention are lower-case words passed to `make'. Global targets are one-word targets. Scoped targets are usually two-words separated by a period. 5.4.1 Global ------------ `make' Alias for `make build'. `make build' Build main product. All necessary dependencies are also built if required. `make clean' Clean all build output excluding contrib modules. Configuration is retained. `make install' Perform final product(s) install. This will install build products to a standard directory or one specified via `configure --prefix' option. `make uninstall' Perform final product(s) uninstall. This will uninstall any products which may have been previously installed. `make xclean' Clean all build output including contrib modules. Configuration is retained. `make doc' Build auto-generated project documentation. Various articles are produced and may be found in `build/doc/articles'. `make report.help' Print list of available makefile vars report targets. These reports detail var definitions and expanded values used by the build system. For experts only. `make report.all' Convenience target which aggregates all reports. For experts only. 5.4.2 General Modules --------------------- General modules such as `libhb', `test' and `gtk' have the following scoped targets: `make MODULE.build' Build MODULE. `make MODULE.clean' Clean build output for MODULE. 5.4.3 Contrib Modules --------------------- Contrib modules such as `a52dec', `bzip2', `faac', `faad2', `ffmpeg', `lame', `libdca', `libdvdread', `libmkv', `libogg', `libsamplerate', `libtheora', `libvorbis', `mp4v2', `mpeg2dec', `x264' and `zlib' have the following scoped targets: `make MODULE.fetch' Download source tarball from the Internet and save to `TOP/downloads' directory. No check-summing is performed. `make MODULE.extract' Extract source tarball into `build' tree. `make MODULE.patch' Apply appropriate patches (if any) to module sources. `make MODULE.configure' Configure module sources. This usually invokes autotool configure. `make MODULE.build' Build module. This usually invokes autotool build. `make MODULE.install' Install module products such as headers and libraries into `build' tree. This usually invokes autotool install. `make MODULE.uninstall' Uninstall module products; generally the reverse of install. This usually invokes autotool uninstall. `make MODULE.clean' Clean module; generally the reverse of build. This usually invokes autotool clean. `make MODULE.xclean' Extra clean module; first invokes uninstall then recursively removes the module build directory. 5.4.4 Contrib Touch and Untouch ------------------------------- Also available are some very granular targets which help force builds from specific cycle points. The following targets are available to touch and untouch the respective module target; this will force the build system to treat the target as satisfied after a touch or unsatisfied after an untouch: * make MODULE.extract.touch * make MODULE.extract.untouch * make MODULE.patch.touch * make MODULE.patch.untouch * make MODULE.configure.touch * make MODULE.configure.untouch * make MODULE.build.touch * make MODULE.build.untouch * make MODULE.install.touch * make MODULE.install.untouch 5.4.5 Contrib Aggregates ------------------------ For convenience, the following targets aggregate the all contrib modules' respective targets together: * make contrib.fetch * make contrib.extract * make contrib.patch * make contrib.configure * make contrib.build * make contrib.install * make contrib.uninstall * make contrib.clean * make contrib.xclean 5.5 Customizing Make ==================== If the need arises to override settings in the build system (essentially gnu-make variables) the recommended method is to create optional include files which are automatically included if present and follow this naming convention; Do not check these files into the repository: `_SRC_/custom.defs' Custom makevar definitions outside `build'. Suitable for settings which apply across all builds for a particular checkout; or which survives manual removal of `build'. `_SRC_/custom.rules' Custom make rules outside `build'. Suitable for rules which apply across all builds for a particular checkout; or which survives manual removal of `build'. `_BUILD_/GNUmakefile.custom.defs' Custom makevar definitions specific to a `build' directory. `_BUILD_/GNUmakefile.custom.rules' Custom makevar rules specific to a `build' directory. The purpose is to allow a place to store local build settings for testing, tweaking, and experimenting with build configuration without losing your settings if `configure' is invoked; ie: `configure' would overwrite `GNUmakefile' and any customizations contained therein would be lost. Here is a short example of what the contents of `_SRC_/custom.defs' might contain: ## bump to gcc-4.2 in current path GCC.gcc = /usr/bin/gcc-4.2 ## replace optimize for 'speed' with more aggressive settings GCC.args.O.speed = -O3 -fomit-frame-pointer -msse4.2 See also `make report.help' which displays a set of reports used to dump makefile vars. 5.6 Universal Binaries ====================== This section outlines convenience procedures for creating Universal Binaries for all the architectures. Note: The dummy (container) build configuration uses `--disable-xcode'; but the nested architecture builds will all make full use of Xcode. Create a dummy (container) build configuration and use it to launch a nested-build for each architecture serially; optionally you may substitute `make ub.build.serial' for `make ub.build.parallel' if your machine has the horsepower: ./configure --disable-xcode cd build/ make ub.build.serial make ub.combine To specify a subset of architectures to be built first create/edit `_SRC_/custom.defs' with the following override to build UB for `i386' and `x86_64' before invoking `make': ## prefer i386 (order is important) UB.archs = i386 x86_64 6 Building via Xcode.app ************************ 6.1 Checkout Sources ==================== Checkout HandBrake from the official source-code repository. svn checkout svn://svn.handbrake.fr/HandBrake/trunk hb-trunk cd hb-trunk Sources are checked out from the `trunk' branch. This document was generated from that very branch, and for example purposes, we will use exactly the same branch. If you have write-access to the repository, then you may add the appropriate login/password information as needed. It is recommended to use Subversion 1.5.0 or higher. Lower versions should also work. 6.2 Build ========= Open Xcode.app from a terminal by using the `open' command which passes your shell environment and its `PATH' setting to Xcode. Do not attempt to launch Xcode.app from Finder or by using Finder to open `HandBrake.xcodeproj' - doing so will defeat any custom path settings which contain required tools. open `macosx/HandBrake.xcodeproj' Once the HandBrake Xcode project is open, perform the following steps to build the default configuration: * select active configuration standard * select active target HandBrake * click Build or Build and Go The first build (on an empty `build' directory) will take a bit of time. You may use the Build Results window to observe progress. The most time-consuming part of the build is when the external build system (essentially the terminal method) is triggered by Xcode and a substantial amount of log transcript ensues. Much of that transcript are warnings and errors that are part of the normal build process for 3rd-party contributed modules so in general you need not do anything. However, if Xcode itself reports the build failed, then you must take corrective action. Unfortunately, due to limitations of Xcode we do not have hooks in place to offer finer-grained control over per-module make actions for the (external) build system. Thus, you will have to use terminal to accomplish those tasks. Just `cd' into the build directory which is associated with your active configuration and perform any necessary `make' commands. Be careful not to issue commands from the terminal simultaneously with Xcode tasks as that will confuse both Xcode and make and likely corrupt your build directory. When you click clean in Xcode it will not perform an external build clean. Basically HandBrakeCLI and HandBrake.app are the only products which have full Xcode iterative development flexibility. Each configuration uses a different `build' directory. This makes it possible to build each configuration and switch between them without losing their respective build state. The description of each configuration and the name convention for build directories are as follows: `standard' This configuration will build host native architecture. Build directory is `build.standard' . The standard variant produces optimized code without debug information. `standard.i386' This configuration will build i386 architecture. Build directory is `build.standard.i386' . `standard.x86_64' This configuration will build x86_64 architecture. Build directory is `build.standard.x86_64' . `standard.ppc' This configuration will build ppc architecture. Build directory is `build.standard.ppc' . `standard.ppc64' This configuration will build ppc64 architecture. Build directory is `build.standard.ppc64' . `debug' This configuration will build host native architecture. Build directory is `build.debug' . The debug variant produces unoptimized code with debug information. `debug.i386' This configuration will build i386 architecture. Build directory is `build.debug.i386' . The debug variant produces unoptimized code with debug information. `debug.x86_64' This configuration will build x86_64 architecture. Build directory is `build.debug.x86_64' . The debug variant produces unoptimized code with debug information. `debug.ppc' This configuration will build ppc architecture. Build directory is `build.debug.ppc' . The debug variant produces unoptimized code with debug information. `debug.ppc64' This configuration will build ppc64 architecture. Build directory is `build.debug.ppc64' . The debug variant produces unoptimized code with debug information. 6.3 External Targets ==================== The following external targets appear in the Xcode project and perform build and clean actions. `external' Target maps to `make build' and `make clean' for everything Xcode products depend upon from the external build system. `libhb' Target maps to `make libhb.build' and `make libhb.clean'. `contrib' Target maps to `make contrib.build' and `make contrib.xclean'. 6.4 User-Defined Settings ========================= The following user defined settings are used in Xcode project for the external build system: `EXTERNAL_BUILD' Specifies the build (scratch) directory for each configuration. `EXTERNAL_JOBS' Specifies the concurrency factor for the external build system when builds are launched from within Xcode. Modify for faster external builds if your system has the horsepower and resources. Specifying a value greater than the number of CPU cores (or virtual cores) in your system is unlikely to produce gains and will needlessly consume extra resources. `EXTERNAL_METHOD' Do not modify; Used for internal/external build coordination and must always be `xcode'. `EXTERNAL_SRC' Specifies the top-level source directory for HandBrake. 7 Troubleshooting ***************** When troubleshooting build issues, the following files relative to the `build/' directory may be especially useful: `GNUmakefile' Top-level makefile which contains build settings generated via configure. `log/config.info.txt' Record of output from configure. `log/config.verbose.txt' Record of verbose output from configure. `log/build.txt' Record of output from `configure --launch'. Similar output may be recorded using `make' depending on which shell is in use, eg: `make >& log/build.txt' or `make > log/build.txt 2>&1'. `log/xcodemake.env.txt' Environment (variables) dump as seen when Xcode forks `make'. Mac OS X only. Appendix A Project Repository Details ************************************* url: svn://svn.handbrake.fr/HandBrake/trunk root: svn://svn.handbrake.fr/HandBrake branch: trunk uuid: b64f7644-9d1e-0410-96f1-a4d463321fa5 rev: 2591 date: 2009-06-21 13:15:04 -0400 type: developer