OSDN Git Service

ramips: add led_source for Asus RT-AC1200 devices
[immortalwrt/immortalwrt.git] / target / linux / ramips / dts / mt7628an_asus_rt-ac1200.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         aliases {
10                 led-boot = &led_wps;
11                 led-failsafe = &led_wps;
12                 led-running = &led_wps;
13                 led-upgrade = &led_wps;
14                 label-mac-device = &ethernet;
15         };
16
17         keys {
18                 compatible = "gpio-keys";
19
20                 reset {
21                         label = "reset";
22                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
23                         linux,code = <KEY_RESTART>;
24                 };
25
26                 wps {
27                         label = "wps";
28                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
29                         linux,code = <KEY_WPS_BUTTON>;
30                 };
31         };
32
33         leds {
34                 compatible = "gpio-leds";
35
36                 led_wps: wps {
37                         label = "blue:wps";
38                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
39                 };
40
41                 wlan2g {
42                         label = "blue:wlan2g";
43                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
44                         linux,default-trigger = "phy0tpt";
45                 };
46         };
47 };
48
49 &spi0 {
50         status = "okay";
51
52         flash@0 {
53                 compatible = "jedec,spi-nor";
54                 reg = <0>;
55                 spi-max-frequency = <58000000>;
56                 m25p,fast-read;
57
58                 partitions: partitions {
59                         compatible = "fixed-partitions";
60                         #address-cells = <1>;
61                         #size-cells = <1>;
62
63                         partition@0 {
64                                 label = "u-boot";
65                                 reg = <0x0 0x30000>;
66                                 read-only;
67                         };
68
69                         partition@30000 {
70                                 label = "u-boot-env";
71                                 reg = <0x30000 0x10000>;
72                                 read-only;
73                         };
74
75                         factory: partition@40000 {
76                                 label = "factory";
77                                 reg = <0x40000 0x10000>;
78                                 read-only;
79
80                                 compatible = "nvmem-cells";
81                                 #address-cells = <1>;
82                                 #size-cells = <1>;
83
84                                 macaddr_factory_4: macaddr@4 {
85                                         reg = <0x4 0x6>;
86                                 };
87                         };
88
89                         partition@50000 {
90                                 compatible = "denx,uimage";
91                                 label = "firmware";
92                                 reg = <0x50000 0xfb0000>;
93                         };
94                 };
95         };
96 };
97
98 &gpio {
99         enable-leds {
100                 gpio-hog;
101                 line-name = "enable-leds";
102                 output-low;
103                 gpios = <4 GPIO_ACTIVE_HIGH>;
104         };
105 };
106
107 &ethernet {
108         nvmem-cells = <&macaddr_factory_4>;
109         nvmem-cell-names = "mac-address";
110 };
111
112 &esw {
113         mediatek,portmap = <0x3e>;
114         mediatek,led_source = <4>;
115 };
116
117 &wmac {
118         status = "okay";
119
120         mediatek,mtd-eeprom = <&factory 0x0>;
121 };
122
123 &pcie {
124         status = "okay";
125 };
126
127 &pcie0 {
128         mt76@0,0 {
129                 compatible = "mediatek,mt76";
130                 reg = <0x0000 0 0 0 0>;
131                 mediatek,mtd-eeprom = <&factory 0x8000>;
132                 ieee80211-freq-limit = <5000000 6000000>;
133
134                 led {
135                         led-sources = <2>;
136                         led-active-low;
137                 };
138         };
139 };