From: cyoichi Date: Wed, 1 Jun 2016 00:58:06 +0000 (+0900) Subject: info/GNU-coreutils: a few corrections and modifications. X-Git-Tag: util-linux-2.12r~25 X-Git-Url: http://git.osdn.net/view?p=linuxjm%2Fjm.git;a=commitdiff_plain;h=8aa861751e64818a28d4d0ec8c1563f09ff74968 info/GNU-coreutils: a few corrections and modifications. --- diff --git a/info/GNU_coreutils/po4a/coreutils-ja.po b/info/GNU_coreutils/po4a/coreutils-ja.po index 4b8d163a..77fb429d 100644 --- a/info/GNU_coreutils/po4a/coreutils-ja.po +++ b/info/GNU_coreutils/po4a/coreutils-ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2014-04-08 10:38+0900\n" -"PO-Revision-Date: 2016-02-26 10:36+0900\n" +"PO-Revision-Date: 2016-05-31 12:18+0900\n" "Last-Translator: Chonan Yoichi \n" "Language-Team: Linux JM project \n" "Language: \n" @@ -2717,7 +2717,7 @@ msgstr "tty invocation" #. type: menuentry #: coreutils.texi:394 msgid "Print file name of terminal on standard input" -msgstr "標準出力に接続している端末のファイル名を表示する" +msgstr "標準入力に接続している端末のファイル名を表示する" #. type: section #: coreutils.texi:396 coreutils.texi:13701 @@ -4498,19 +4498,14 @@ msgid "" "IEC 60027-2) prefixes} for binary multiples." msgstr "" "ブロックサイズの指定には、1 ブロックあたりのバイト数を示す正の整数を\n" -"使えばよい。あるいは、@code{human-readable} や @code{si} を指定して、「人間に" -"読み\n" -"やすい」書式を選ぶこともできる。整数には接尾辞 (suffix) を付けることが\n" -"できるが、そうした接尾辞は、@samp{10} の累乗倍 (訳注: 10^3 倍、10^6 倍な" -"ど) \n" -"を示す場合は、SI (国際単位系) の単位の前に付ける接頭辞 (prefix) の上位\n" -"互換であり、@samp{2} の累乗倍 (訳注: 2^10 倍、2^20 倍など) を示す場合は、\n" +"使えばよい。あるいは、@code{human-readable} や @code{si} を指定して、「人間に読み\n" +"やすい」書式を選ぶこともできる。整数の後ろには接尾辞 (suffix) を\n" +"続けてもよい。そうした接尾辞は、単位の前に付けて @samp{10} の累乗倍を表す \n" +"SI (国際単位系) の接頭辞 (prefix) や、@samp{2} の累乗倍を表す \n" "ISO/IEC 80000-13 (以前は IEC 60027-2 だった) の接頭辞の上位互換である。\n" "単位の前に付ける接頭辞については、次の URL を参照していただきたい。@*\n" -"@uref{http://www.bipm.org/en/si/si_brochure/chapter3/prefixes.html, SI " -"prefixes:}.\n" -"@uref{http://physics.nist.gov/cuu/Units/binary.html, ISO/IEC 80000-13 " -"prefixes:}." +"@uref{http://www.bipm.org/en/publications/si-brochure/chapter3.html, SI prefixes:}.\n" +"@uref{http://physics.nist.gov/cuu/Units/binary.html, ISO/IEC 80000-13 prefixes:}." #. type: Plain text #: coreutils.texi:917 @@ -5108,7 +5103,7 @@ msgstr "KILL" #. type: table #: coreutils.texi:1068 msgid "9. Kill (cannot be caught or ignored)." -msgstr "9. 強制終了 (Kill) (キャッチすることも無視することもできない)。" +msgstr "9. 強制終了 (Kill) (捕獲することも無視することもできない)。" #. type: item #: coreutils.texi:1068 @@ -5231,9 +5226,7 @@ msgstr "STOP" #. type: table #: coreutils.texi:1096 msgid "Stop executing (cannot be caught or ignored)." -msgstr "" -"実行を一時停止する (stop) (キャッチすることも無視することも\n" -"できない)。" +msgstr "実行を一時停止する (stop) (捕獲することも無視することもできない)。" #. type: item #: coreutils.texi:1096 @@ -13783,10 +13776,10 @@ msgid "" "ASCII and a blank is a space or a tab, but the @env{LC_CTYPE} locale can " "change this." msgstr "" -"電話帳 (@dfn{phone directory}) 順にソートする。ソートする際、表示可能\n" -"文字、数字、空白以外のすべての文字を無視する。デフォルトの表示可能\n" -"文字と数字は ASCII のそれであり、空白はスペースまたはタブだが、後者\n" -"は @env{LC_CTYPE} のロケールによっては違うかもしれない。" +"電話帳 (@dfn{phone directory}) 順にソートする。すなわち、ソートする際に\n" +"アルファベット、数字、空白以外のすべての文字を無視する。デフォルト\n" +"のアルファベットと数字は ASCII のそれであり、空白はスペースまたは\n" +"タブだが、後者は @env{LC_CTYPE} のロケールによっては違うかもしれない。" #. type: opindex #: coreutils.texi:4306 coreutils.texi:4308 coreutils.texi:5110 @@ -17925,9 +17918,8 @@ msgid "" "With @option{-f}, use the first byte of @var{input_delim_byte} as the input " "fields separator (default is TAB)." msgstr "" -"@option{-f} と併せて使うと、入力のフィールド区切りに @var{input_delim_byte} " -"の\n" -"最初のバイトを使用する (デフォルトはタブ)。" +"@option{-f} と併せて使うと、入力のフィールド区切りに @var{input_delim_byte} の\n" +"最初のバイトが使用される (デフォルトはタブ)。" #. type: table #: coreutils.texi:6019 @@ -31471,7 +31463,7 @@ msgid "" "any of its subdirectories." msgstr "" "ディレクトリやそのサブディレクトリに存在するファイルについて表示\n" -"する際に、その最終更新日時 (modification time) を表示する。\n" +"する際に、その最終更新日時 (modification time) も表示する。\n" "@sp 1\n" "(訳注: 一つ留意していただきたいことがある。ディレクトリのタイム\n" "スタンプについては、そのディレクトリ以下にあるファイルのうち \n" @@ -32145,7 +32137,7 @@ msgid "" "instead operating on them directly" msgstr "" "引数としてデバイスノードが指定された場合、stat はファイルシステムの\n" -"リストを調べて、そのノードを見つけたりはせず、デバイスノードを直接\n" +"リスト中にそのノードを捜し求めたりはせず、デバイスノードそのものを\n" "動作の対象にする (訳注: すなわち、そのデバイス上に存在するファイル\n" "システムのマウントポイントではなく、デバイスノードそのもののマウント\n" "ポイントを表示する)。" @@ -32170,13 +32162,12 @@ msgstr "" "newdir を表示する。また the current base mount point が「根底にある \n" "(すなわち、デバイスを最初にマウントした) マウントポイント」のこと\n" "なら、stat を再帰的に呼び出しても、それを突き止めることはできない。\n" -"ひょっとすると、書式指定子に @samp{%m} が追加された coreutils-8.6 から \n" -"coreutils-8.20 あたりまでの stat を linux-2.6 時代の古いカーネルと\n" -"組み合わせて使ったときの動作を言っているのかもしれない。その場合は、\n" -"@samp{stat -c \"%m\" newdir/@var{FILE}} は上記の olddir を出力するようだ。\n" -"従って、そうした組み合わせでは、stat を再帰的に実行することで、\n" -"最初にデバイスをマウントしたときのマウントポイントを知ることが\n" -"できる。)" +"ひょっとすると、書式指定子に @samp{%m} が追加された coreutils-8.6 以降の \n" +"stat を linux-2.6 時代の古いカーネルと組み合わせて使ったときの動作\n" +"を言っているのかもしれない。その場合は、@samp{stat -c \"%m\" newdir/@var{FILE}} \n" +"は上記の olddir を出力するようだ。従って、そうした組み合わせでは、\n" +"stat を再帰的に実行することで、最初にデバイスをマウントしたときの\n" +"マウントポイントを知ることができる。)" #. type: Plain text #: coreutils.texi:11854 @@ -35199,10 +35190,10 @@ msgid "" "(the first was from the network)." msgstr "" "上記コマンドの問題点の一つは、ただでさえ時間のかかる SHA1 の計算に\n" -"取りかかる前に、ダウンロードが完了するのを待たなければならないことで\n" -"ある。たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて\n" +"取りかかる前に、ダウンロードが完了するのを待たなければならないことだ。\n" +"たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて\n" "読み直さなければならないことだろう (一度目の読み込みは、ネットワーク\n" -"からだ)。" +"からである)。" #. type: Plain text #: coreutils.texi:13015 @@ -36568,7 +36559,7 @@ msgstr "端末の諸特性を表示・変更する。" #. type: menuentry #: coreutils.texi:13650 msgid "Print file name of terminal on standard input." -msgstr "標準出力に接続している端末のファイル名を表示する。" +msgstr "標準入力に接続している端末のファイル名を表示する。" #. type: section #: coreutils.texi:13654 @@ -38720,7 +38711,7 @@ msgstr "" #: coreutils.texi:14437 #, no-wrap msgid "@command{tty}: Print file name of terminal on standard input" -msgstr "@command{tty}: 標準出力に接続している端末のファイル名を表示する" +msgstr "@command{tty}: 標準入力に接続している端末のファイル名を表示する" #. type: pindex #: coreutils.texi:14439 @@ -44387,9 +44378,9 @@ msgstr "" "指定されていない場合は、@var{first} が @var{last} より大きい場合でも、デフォルトの \n" "@samp{1} が @var{increment} として使用される。@var{first} のデフォルトもまた @samp{1} である。\n" "従って、@code{seq 1} は @samp{1} を表示するが、@code{seq 0} や @code{seq 10 5} は、何も出力\n" -"しない。数列が終了するのは、現在の数値に @var{increment} を加えると @var{last} より\n" -"大きくなる時点である。だから、@code{seq 1 10 10} は、@samp{1} しか表示しない。\n" -"なお、数値には浮動小数点数を指定してもよい。@xref{Floating point}." +"しない。数列が終了するのは、現在の数値に @var{increment} を加えたら @var{last} より\n" +"大きくなってしまう時点である。だから、@code{seq 1 10 10} は、@samp{1} しか表示\n" +"しない。なお、数値には浮動小数点数を指定してもよい。@xref{Floating point}." #. type: opindex #: coreutils.texi:16885 coreutils.texi:16887 diff --git a/info/GNU_coreutils/po4a/coreutils-ja.texi.patch b/info/GNU_coreutils/po4a/coreutils-ja.texi.patch index 37809941..c2ecad7f 100644 --- a/info/GNU_coreutils/po4a/coreutils-ja.texi.patch +++ b/info/GNU_coreutils/po4a/coreutils-ja.texi.patch @@ -1,5 +1,5 @@ ---- coreutils-ja.texi.orig 2016-02-26 10:44:43.000000000 +0900 -+++ coreutils-ja.texi 2016-02-26 10:46:07.000000000 +0900 +--- coreutils-ja.texi.orig 2016-05-31 12:21:46.000000000 +0900 ++++ coreutils-ja.texi 2016-05-31 12:22:17.000000000 +0900 @@ -5,7 +5,7 @@ @c @c =========================================================================== @@ -846,7 +846,7 @@ @cindex block size -@@ -1155,7 +1075,7 @@ +@@ -1154,7 +1074,7 @@ 対し、@option{--block-size} オプションは影響することに注意していただきたい。 @node Floating point @@ -855,7 +855,7 @@ @cindex floating point @cindex IEEE floating point -@@ -1181,7 +1101,7 @@ +@@ -1180,7 +1100,7 @@ Library Reference Manual}. @node Signal specifications @@ -864,7 +864,7 @@ @cindex signals, specifying @var{signal} の指定には、@samp{HUP} のようなシグナル名や @samp{1} のようなシグナル番号、 -@@ -1346,7 +1266,7 @@ +@@ -1344,7 +1264,7 @@ の実行でも、ランダムソースとしてそのファイルを使用すればよい。 @node Target directory @@ -873,7 +873,7 @@ @cindex target directory -@@ -1447,7 +1367,7 @@ +@@ -1445,7 +1365,7 @@ @option{--no-target-directory} (@option{-T}) オプションを一緒に使うことはできない。 @node Trailing slashes @@ -882,7 +882,7 @@ @cindex trailing slashes -@@ -1471,7 +1391,7 @@ +@@ -1469,7 +1389,7 @@ であり、POSIX 規格のほかの部分とも首尾一貫している。 @node Traversing symlinks @@ -891,7 +891,7 @@ @cindex symbolic link to directory, controlling traversal of -@@ -1557,7 +1477,7 @@ +@@ -1555,7 +1475,7 @@ を同時に使っているときの話である。) @node Special built-in utilities @@ -900,7 +900,7 @@ プログラムの中には、@command{nice} のように、ほかのプログラムを起動できるものが ある。たとえば、@samp{nice cat file} というコマンドは、コマンド @samp{cat file} を -@@ -1592,7 +1512,7 @@ +@@ -1590,7 +1510,7 @@ 実行すると、シェルのサスペンドは起こらず、エラーメッセージが出力される。 @node Standards conformance @@ -909,7 +909,7 @@ @vindex POSIXLY_CORRECT GNU ユーティリティのデフォルトの動作が POSIX の規格と一致しない場合 -@@ -1624,7 +1544,7 @@ +@@ -1622,7 +1542,7 @@ ことができる。 @node Output of entire files @@ -918,7 +918,7 @@ @cindex output of entire files @cindex entire files, output of -@@ -1636,10 +1556,8 @@ +@@ -1634,10 +1554,8 @@ * cat invocation:: ファイルを結合して、書き出す。 * tac invocation:: ファイルを結合し、ファイルごとに逆順で書き出す。 * nl invocation:: 行番号を付けて、ファイルを書き出す。 @@ -931,7 +931,7 @@ @end menu @node cat invocation -@@ -2290,7 +2208,7 @@ +@@ -2288,7 +2206,7 @@ @node Formatting file contents @@ -940,7 +940,7 @@ @cindex formatting file contents -@@ -2437,6 +2355,13 @@ +@@ -2435,6 +2353,13 @@ 終了ステータスについては追加情報がある。@option{--invalid} をご覧になって いただきたい。 @@ -954,7 +954,7 @@ @subsection 一般オプション このプログラムでは以下のオプションが使用できる。参照: @ref{Common options}. -@@ -2555,6 +2480,7 @@ +@@ -2553,6 +2478,7 @@ @end table @@ -962,7 +962,7 @@ @subsection 使用できる @var{unit} @option{--from=UNIT} や @option{--to=UNIT} で指定する @var{unit} には、次のものを選択する -@@ -2640,6 +2566,7 @@ +@@ -2638,6 +2564,7 @@ @end table @@ -970,7 +970,7 @@ @subsection @command{nunfmt} の使用例 1 個の数値を人間に読みやすい形に変換する (あるいは、その逆を行う)。 -@@ -3169,7 +3096,7 @@ +@@ -3167,7 +3094,7 @@ @node Output of parts of files @@ -979,7 +979,7 @@ @cindex output of parts of files @cindex parts of files, output of -@@ -3974,7 +3901,7 @@ +@@ -3972,7 +3899,7 @@ @c @end example @node Summarizing files @@ -988,7 +988,7 @@ @cindex summarizing files -@@ -3983,14 +3910,10 @@ +@@ -3981,14 +3908,10 @@ @menu * wc invocation:: 行数、単語数、バイト数を表示する。 * sum invocation:: チェックサムとブロック数を表示する。 @@ -1007,7 +1007,7 @@ @end menu -@@ -4422,7 +4345,7 @@ +@@ -4420,7 +4343,7 @@ @node Operating on sorted files @@ -1016,7 +1016,7 @@ @cindex operating on sorted files @cindex sorted files, operations on -@@ -4434,8 +4357,7 @@ +@@ -4432,8 +4355,7 @@ * shuf invocation:: テキストファイルをシャッフルする。 * uniq invocation:: ファイルから重複を省く。 * comm invocation:: ソート済みの二つのファイルを一行づつ比較する。 @@ -1026,7 +1026,7 @@ * tsort invocation:: トポロジカル・ソート。 @end menu -@@ -5730,9 +5652,9 @@ +@@ -5728,9 +5650,9 @@ @menu * General options in ptx:: プログラム全体の動作に関係するオプション。 @@ -1038,7 +1038,7 @@ * Compatibility in ptx:: @end menu -@@ -6362,7 +6284,7 @@ +@@ -6360,7 +6282,7 @@ @node Operating on fields @@ -1047,7 +1047,7 @@ @menu * cut invocation:: 各行の選択した部分を表示する。 -@@ -6771,7 +6693,7 @@ +@@ -6769,7 +6691,7 @@ @node Operating on characters @@ -1056,7 +1056,7 @@ @cindex operating on characters -@@ -6994,7 +6916,7 @@ +@@ -6992,7 +6914,7 @@ @node Translating @@ -1065,7 +1065,7 @@ @cindex translating characters -@@ -7298,7 +7220,7 @@ +@@ -7296,7 +7218,7 @@ @node Directory listing @@ -1074,7 +1074,7 @@ この章では、@command{ls} とその変種の @command{dir} 及び @command{vdir} について説明する。 こうしたコマンドは、ファイルに関する情報を一覧表示する。 -@@ -7364,18 +7286,18 @@ +@@ -7362,18 +7284,18 @@ 参照 @ref{Common options}. @menu @@ -1101,7 +1101,7 @@ 以下のオプションは、どんなファイルについて @command{ls} が情報を表示するか を決定する。デフォルトで @command{ls} が表示するのは、コマンドラインで指定 -@@ -7508,7 +7430,7 @@ +@@ -7506,7 +7428,7 @@ @node What information is listed @@ -1110,7 +1110,7 @@ 以下のオプションは、@command{ls} がどんな情報を表示するかに関係している。 @command{ls} がデフォルトで表示するのは、ファイル名だけである。 -@@ -7705,7 +7627,7 @@ +@@ -7703,7 +7625,7 @@ @item C ハイパフォーマンス (``contiguous data'') ファイル @item d @@ -1119,7 +1119,7 @@ @item D @c @item F @c semaphore, if this is a distinct file type -@@ -7835,7 +7757,7 @@ +@@ -7833,7 +7755,7 @@ @node Sorting the output @@ -1128,7 +1128,7 @@ @cindex sorting @command{ls} output 以下のオプションは、@command{ls} が出力する情報を並べる際の順序を変更する。 -@@ -7943,7 +7865,7 @@ +@@ -7941,7 +7863,7 @@ @node Details about version sort @@ -1137,7 +1137,7 @@ ファイル名にはインデックス番号やバージョン番号が含まれていることが しばしばあるが、バージョン・ソートは、そうした状況に対処している。 -@@ -7997,7 +7919,7 @@ +@@ -7995,7 +7917,7 @@ @end itemize @node General output formatting @@ -1146,7 +1146,7 @@ 以下のオプションは出力全体の見かけに影響を及ぼす。 -@@ -8184,7 +8106,7 @@ +@@ -8182,7 +8104,7 @@ @node Formatting file timestamps @@ -1155,7 +1155,7 @@ デフォルトでは、ファイルのタイムスタンプは短縮形式で表示される。 すなわち、最近のタイムスタンプ以外は、@samp{Mar 30@ @ 2002} といった -@@ -8323,7 +8245,7 @@ +@@ -8321,7 +8243,7 @@ @node Formatting the file names @@ -1164,7 +1164,7 @@ 以下のオプションは、ファイル名の表示方法を変更する。 -@@ -8527,7 +8449,7 @@ +@@ -8525,7 +8447,7 @@ @node Basic operations @@ -1173,7 +1173,7 @@ @cindex manipulating files -@@ -8538,8 +8460,7 @@ +@@ -8536,8 +8458,7 @@ * cp invocation:: ファイルをコピーする。 * dd invocation:: ファイルの変換とコピー。 * install invocation:: ファイルをコピーし属性をセットする。 @@ -1183,7 +1183,7 @@ * rm invocation:: ファイルやディレクトリを削除する。 * shred invocation:: セキュリティを向上させたファイルの削除。 @end menu -@@ -10354,7 +10275,7 @@ +@@ -10352,7 +10273,7 @@ @node Special file types @@ -1192,7 +1192,7 @@ @cindex special file types @cindex file types, special -@@ -10382,16 +10303,14 @@ +@@ -10380,16 +10301,14 @@ (@dfn{special files}) がある。 @menu @@ -1217,7 +1217,7 @@ @end menu -@@ -11117,7 +11036,7 @@ +@@ -11115,7 +11034,7 @@ @node Changing file attributes @@ -1226,7 +1226,7 @@ @cindex changing file attributes @cindex file attributes, changing -@@ -11792,7 +11711,7 @@ +@@ -11790,7 +11709,7 @@ @node Disk usage @@ -1235,7 +1235,7 @@ @cindex disk usage -@@ -12814,7 +12733,7 @@ +@@ -12811,7 +12730,7 @@ @node Printing text @@ -1244,7 +1244,7 @@ @cindex printing text, commands for @cindex commands for printing text -@@ -12872,7 +12791,7 @@ +@@ -12869,7 +12788,7 @@ @item \c この位置より後を出力しない @item \e @@ -1253,7 +1253,7 @@ @item \f フォームフィード (form feed) @item \n -@@ -13110,7 +13029,7 @@ +@@ -13107,7 +13026,7 @@ @node Conditions @@ -1262,7 +1262,7 @@ @cindex conditions @cindex commands for exit status -@@ -13250,14 +13169,12 @@ +@@ -13247,14 +13166,12 @@ @end display @menu @@ -1283,7 +1283,7 @@ @end menu -@@ -13320,7 +13237,7 @@ +@@ -13317,7 +13234,7 @@ @node Access permission tests @@ -1292,7 +1292,7 @@ @cindex access permission tests @cindex permission tests -@@ -13375,7 +13292,7 @@ +@@ -13372,7 +13289,7 @@ @end table @node File characteristic tests @@ -1301,7 +1301,7 @@ @cindex file characteristic tests -@@ -13416,7 +13333,7 @@ +@@ -13413,7 +13330,7 @@ @node String tests @@ -1310,7 +1310,7 @@ @cindex string tests -@@ -13462,7 +13379,7 @@ +@@ -13459,7 +13376,7 @@ @node Numeric tests @@ -1319,7 +1319,7 @@ @cindex numeric tests @cindex arithmetic tests -@@ -13507,7 +13424,7 @@ +@@ -13504,7 +13421,7 @@ @node Connectives for test @@ -1328,7 +1328,7 @@ @cindex logical connectives @cindex connectives, logical -@@ -13596,16 +13513,15 @@ +@@ -13593,16 +13510,15 @@ @end display @menu @@ -1349,7 +1349,7 @@ @cindex string expressions @cindex expressions, string -@@ -13685,7 +13601,7 @@ +@@ -13682,7 +13598,7 @@ @node Numeric expressions @@ -1358,7 +1358,7 @@ @cindex numeric expressions @cindex expressions, numeric -@@ -13805,7 +13721,7 @@ +@@ -13802,7 +13718,7 @@ @node Redirection @@ -1367,7 +1367,7 @@ @cindex redirection @cindex commands for redirection -@@ -13976,7 +13892,7 @@ +@@ -13973,7 +13889,7 @@ @node File name manipulation @@ -1376,7 +1376,7 @@ @cindex file name manipulation @cindex manipulation of file names -@@ -14540,7 +14456,7 @@ +@@ -14537,7 +14453,7 @@ @node Working context @@ -1385,7 +1385,7 @@ @cindex working context @cindex commands for printing the working context -@@ -15385,7 +15301,7 @@ +@@ -15382,7 +15298,7 @@ @node User information @@ -1394,7 +1394,7 @@ @cindex user information, commands for @cindex commands for printing user information -@@ -15394,12 +15310,12 @@ +@@ -15391,12 +15307,12 @@ しているか、どんなグループに所属しているか、などである。 @menu @@ -1413,7 +1413,7 @@ @end menu -@@ -15763,7 +15679,7 @@ +@@ -15760,7 +15676,7 @@ @node System context @@ -1422,7 +1422,7 @@ @cindex system context @cindex context, system -@@ -15824,11 +15740,9 @@ +@@ -15821,11 +15737,9 @@ @exitstatus @menu @@ -1437,7 +1437,7 @@ * Padding and other flags:: 0 や空白による空き埋め、その他。 * Setting the time:: システムクロックの変更。 * Options for date:: 現在の日時以外の指定。 -@@ -15839,7 +15753,7 @@ +@@ -15836,7 +15750,7 @@ @end menu @node Time conversion specifiers @@ -1446,7 +1446,7 @@ @cindex time conversion specifiers @cindex conversion specifiers, time -@@ -15917,7 +15831,7 @@ +@@ -15914,7 +15828,7 @@ @node Date conversion specifiers @@ -1455,7 +1455,7 @@ @cindex date conversion specifiers @cindex conversion specifiers, date -@@ -15997,7 +15911,7 @@ +@@ -15994,7 +15908,7 @@ @node Literal conversion specifiers @@ -1464,7 +1464,7 @@ @cindex literal conversion specifiers @cindex conversion specifiers, literal -@@ -16015,7 +15929,7 @@ +@@ -16012,7 +15926,7 @@ @node Padding and other flags @@ -1473,7 +1473,7 @@ @cindex numeric field padding @cindex padding of numeric fields -@@ -16084,7 +15998,7 @@ +@@ -16081,7 +15995,7 @@ @node Setting the time @@ -1482,7 +1482,7 @@ @cindex setting the time @cindex time setting -@@ -16182,7 +16096,7 @@ +@@ -16179,7 +16093,7 @@ 引数 @var{timespec} では、日付の後ろに時刻をどの単位まで追加するかを 指定する。以下の一つを指定することができる。 @table @samp @@ -1491,7 +1491,7 @@ 日付のみを表示する。@var{timespec} を省略した場合のデフォルト。 @item hours -@@ -16747,7 +16661,7 @@ +@@ -16744,7 +16658,7 @@ 含める方である。 @node SELinux context @@ -1500,7 +1500,7 @@ @cindex SELinux context @cindex SELinux, context -@@ -16756,10 +16670,8 @@ +@@ -16753,10 +16667,8 @@ この章では、SELinux コンテキスト関係の操作を行うコマンドを説明する。 @menu @@ -1513,7 +1513,7 @@ @end menu @node chcon invocation -@@ -16946,7 +16858,7 @@ +@@ -16943,7 +16855,7 @@ @end display @node Modified command invocation @@ -1522,7 +1522,7 @@ @cindex modified command invocation @cindex invocation of commands, modified -@@ -17613,7 +17525,7 @@ +@@ -17610,7 +17522,7 @@ @node Process control @@ -1531,7 +1531,7 @@ @cindex processes, commands for controlling @cindex commands for controlling processes -@@ -17702,7 +17614,7 @@ +@@ -17699,7 +17611,7 @@ @xref{Signal specifications}. @node Delaying @@ -1540,7 +1540,7 @@ @cindex delaying commands @cindex commands for delaying -@@ -17735,11 +17647,11 @@ +@@ -17732,11 +17644,11 @@ @table @samp @item s @@ -1555,7 +1555,7 @@ @item d 日 @end table -@@ -17758,7 +17670,7 @@ +@@ -17755,7 +17667,7 @@ @node Numeric operations @@ -1564,7 +1564,7 @@ @cindex numeric operations 以下のプログラムは、数に関係した作業をする。 -@@ -17962,7 +17874,7 @@ +@@ -17959,7 +17871,7 @@ @node File permissions @@ -1573,7 +1573,7 @@ @include perm-ja.texi @include parse-datetime-ja.texi -@@ -17978,13 +17890,13 @@ +@@ -17975,13 +17887,13 @@ (@uref{http://www.linuxjournal.com/article.php?sid=2762}) @menu @@ -1590,7 +1590,7 @@ @end menu -@@ -18559,6 +18471,142 @@ +@@ -18556,6 +18468,142 @@ Kernighan 氏に、この記事を読んでチェックしてくださったことについて、 心からお礼を申し上げる。 @@ -1726,7 +1726,7 @@ +numfmt, ptx, tsort, chcon, runcon を翻訳 + +@item -+2016-02-26@* ++2016-05-29@* +numfmt の章の構成を修正。訳文の訂正と細かい変更 by 長南洋一 +@end itemize + diff --git a/info/GNU_coreutils/release/README.ja b/info/GNU_coreutils/release/README.ja index 2b9547fa..f956a8e4 100644 --- a/info/GNU_coreutils/release/README.ja +++ b/info/GNU_coreutils/release/README.ja @@ -12,6 +12,7 @@ 1.3 /usr/share/info ディレクトリ以外へのインストール 1.4 info ファイルの作成 (おまけ 1) 1.5 html ファイルの作成 (おまけ 2) + 1.6 マニュアルの印刷 2 使用法 2.1 日本語版 coreutils info マニュアルの呼び出し方 2.2 info マニュアルにおける基本的なキー操作 @@ -135,7 +136,7 @@ info ファイルを作成する方法を書いておきます。 「21.1.6 `date' のオプション」から「21.1.7 `date' の使用例」へのリンクが うまく作れません。言い換えると、「21.1.6 `date' のオプション」から 「21.1.7 `date' の使用例」へ移動することができないのです (その逆も -できない)。そこで、わたくしは、ちょっと乱暴ですが、coreutils-ja.info を +できない)。そこで、私は、ちょっと乱暴ですが、coreutils-ja.info を 直接手で書き変えてしまいました。次の 2 箇所です。 1) 「21.1.6 `date' のオプション」の Node 行 @@ -161,8 +162,8 @@ info ファイルを作成する方法を書いておきます。 あるかもしれませんし、makeinfo のバージョンによっては、こんなことを する必要はないかもしれません。 -注意: makeinfo のバージョンによっては、日本語をうまく扱えないことが - あります。たとえば、Debian jessie の makeinfo 5.2 がそうです。 + 注意: makeinfo のバージョンによっては、日本語をうまく扱えないことが + あります。たとえば、Debian jessie の makeinfo 5.2 がそうです。 1.5 html ファイルの作成 (おまけ 2) ---------------------------------- @@ -189,15 +190,30 @@ info ファイルを作成する方法を書いておきます。 mkdir html cd html - texi2html --split chapter ../coreutils-ja.texi + texi2html --split node ../coreutils-ja.texi - 章ごとではなく、node ごとに分割したかったら、"--split node" です。 + node ごとではなく、章ごとに分割したかったら、"--split chapter" です。 texi2html の詳しい使い方については、"man texi2html" で調べてください。 なお、makeinfo に --html オプションを付けても、texi ファイルから html ファイルを作ることができます。こちらについての詳細は、"info texinfo" の "Generating HTML" をご覧ください。 +1.6 マニュアルの印刷 +-------------------- + + 注意: 現在のところ、マニュアルの印刷はうまく行きません。 + + 本来なら、texi ファイルからは、info ファイルを作成できるだけでなく、 +texi2dvi コマンドを使用して dvi ファイルを作成し、印刷することも +できるはずです。確かに、英語の coreutils.texi などからなら、それが +可能です。しかし、日本語版の coreutils-ja.texi の場合は、texi2dvi で +dvi ファイルがうまく作れません。出来上がった dvi ファイルを xdvi で +見ても、日本語の部分がまったく表示されないのです。私は、texi2dvi 4.13 +と 5.2 で試しました (debian では、texi2dvi や makeinfo コマンドは、 +texinfo パッケージに入っています)。何か工夫が必要なのかもしれません。 + + 2 使用法 ========= @@ -428,5 +444,5 @@ l コマンドを使えば済みます。"g(coreutils-ja)ls invocation" と 注 7: 現在のサーチパスは、info コマンド実行中に h または ? キーを 押すと、見ることができます。 -2015-11-18 訳者 +2016-5-29 訳者 diff --git a/info/GNU_coreutils/release/coreutils-ja.info b/info/GNU_coreutils/release/coreutils-ja.info index fd57514b..29a96a56 100644 --- a/info/GNU_coreutils/release/coreutils-ja.info +++ b/info/GNU_coreutils/release/coreutils-ja.info @@ -399,7 +399,7 @@ man ページに当ってみていただきたい。そちらの方が正しい * pwd invocation:: 現在作業中のディレクトリを表示する * stty invocation:: 端末の諸特性を表示・変更する * printenv invocation:: 環境変数のすべて、あるいは一部を表示する -* tty invocation:: 標準出力に接続している端末のファイル名を表示する +* tty invocation:: 標準入力に接続している端末のファイル名を表示する `stty': 端末の諸特性を表示・変更する @@ -744,14 +744,13 @@ GNU プログラムには、ディスクの使用量を「ブロック数」で ブロックサイズの指定には、1 ブロックあたりのバイト数を示す正の整数を 使えばよい。あるいは、`human-readable' や `si' を指定して、「人間に読み -やすい」書式を選ぶこともできる。整数には接尾辞 (suffix) を付けることが -できるが、そうした接尾辞は、`10' の累乗倍 (訳注: 10^3 倍、10^6 倍など) -を示す場合は、SI (国際単位系) の単位の前に付ける接頭辞 (prefix) の上位 -互換であり、`2' の累乗倍 (訳注: 2^10 倍、2^20 倍など) を示す場合は、 -ISO/IEC 80000-13 (以前は IEC 60027-2 だった) の接頭辞の上位互換である。 +やすい」書式を選ぶこともできる。整数の後ろには接尾辞 (suffix) を +続けてもよい。そうした接尾辞は、単位の前に付けて `10' の累乗倍を表す SI +(国際単位系) の接頭辞 (prefix) や、`2' の累乗倍を表す ISO/IEC 80000-13 +(以前は IEC 60027-2 だった) の接頭辞の上位互換である。 単位の前に付ける接頭辞については、次の URL を参照していただきたい。 SI prefixes: -(http://www.bipm.org/en/si/si_brochure/chapter3/prefixes.html). +(http://www.bipm.org/en/publications/si-brochure/chapter3.html). ISO/IEC 80000-13 prefixes: (http://physics.nist.gov/cuu/Units/binary.html). @@ -912,7 +911,7 @@ SIGNAL の指定には、`HUP' のようなシグナル名や `1' のような 6. プロセスの中断 (Process abort)。 `KILL' - 9. 強制終了 (Kill) (キャッチすることも無視することもできない)。 + 9. 強制終了 (Kill) (捕獲することも無視することもできない)。 `ALRM' 14. アラームクロック (Alarm Clock)。 @@ -947,8 +946,7 @@ SIGNAL の指定には、`HUP' のようなシグナル名や `1' のような 無効なメモリ参照。 `STOP' - 実行を一時停止する (stop) (キャッチすることも無視することも - できない)。 + 実行を一時停止する (stop) (捕獲することも無視することもできない)。 `TSTP' 端末からの一時停止シグナル。 @@ -3750,10 +3748,10 @@ GNU の `sort' は黙って改行を追加する。なお、行末の改行は `-d' `--dictionary-order' - 電話帳 ("phone directory") 順にソートする。ソートする際、表示可能 - 文字、数字、空白以外のすべての文字を無視する。デフォルトの表示可能 - 文字と数字は ASCII のそれであり、空白はスペースまたはタブだが、後者 - は `LC_CTYPE' のロケールによっては違うかもしれない。 + 電話帳 ("phone directory") 順にソートする。すなわち、ソートする際に + アルファベット、数字、空白以外のすべての文字を無視する。デフォルト + のアルファベットと数字は ASCII のそれであり、空白はスペースまたは + タブだが、後者は `LC_CTYPE' のロケールによっては違うかもしれない。 `-f' `--ignore-case' @@ -5350,7 +5348,7 @@ options::. `-d INPUT_DELIM_BYTE' `--delimiter=INPUT_DELIM_BYTE' `-f' と併せて使うと、入力のフィールド区切りに INPUT_DELIM_BYTE の - 最初のバイトを使用する (デフォルトはタブ)。 + 最初のバイトが使用される (デフォルトはタブ)。 `-n' マルチバイト文字を分割しない (現在のところ、機能しない)。 @@ -10315,7 +10313,7 @@ options::. `--time' ディレクトリやそのサブディレクトリに存在するファイルについて表示 - する際に、その最終更新日時 (modification time) を表示する。 + する際に、その最終更新日時 (modification time) も表示する。 (訳注: 一つ留意していただきたいことがある。ディレクトリのタイム スタンプについては、そのディレクトリ以下にあるファイルのうち @@ -10567,7 +10565,7 @@ stat ...' のようにだ)。 `-L' を指定する必要がある)。 * 引数としてデバイスノードが指定された場合、stat はファイルシステムの - リストを調べて、そのノードを見つけたりはせず、デバイスノードを直接 + リスト中にそのノードを捜し求めたりはせず、デバイスノードそのものを 動作の対象にする (訳注: すなわち、そのデバイス上に存在するファイル システムのマウントポイントではなく、デバイスノードそのもののマウント ポイントを表示する)。 @@ -10585,13 +10583,12 @@ stat ...' のようにだ)。 newdir を表示する。また the current base mount point が「根底にある (すなわち、デバイスを最初にマウントした) マウントポイント」のこと なら、stat を再帰的に呼び出しても、それを突き止めることはできない。 - ひょっとすると、書式指定子に `%m' が追加された coreutils-8.6 から - coreutils-8.20 あたりまでの stat を linux-2.6 時代の古いカーネルと - 組み合わせて使ったときの動作を言っているのかもしれない。その場合は、 - `stat -c "%m" newdir/FILE' は上記の olddir を出力するようだ。 - 従って、そうした組み合わせでは、stat を再帰的に実行することで、 - 最初にデバイスをマウントしたときのマウントポイントを知ることが - できる。) + ひょっとすると、書式指定子に `%m' が追加された coreutils-8.6 以降の + stat を linux-2.6 時代の古いカーネルと組み合わせて使ったときの動作 + を言っているのかもしれない。その場合は、`stat -c "%m" newdir/FILE' + は上記の olddir を出力するようだ。従って、そうした組み合わせでは、 + stat を再帰的に実行することで、最初にデバイスをマウントしたときの + マウントポイントを知ることができる。) ファイルシステムの情報をリストする際には (すなわち、`--file-system' (`-f') 使用時には)、書式指定子の別の一群を使わなければならない。 @@ -11562,10 +11559,10 @@ options::. wget http://example.com/some.iso && sha1sum some.iso 上記コマンドの問題点の一つは、ただでさえ時間のかかる SHA1 の計算に -取りかかる前に、ダウンロードが完了するのを待たなければならないことで -ある。たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて +取りかかる前に、ダウンロードが完了するのを待たなければならないことだ。 +たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて 読み直さなければならないことだろう (一度目の読み込みは、ネットワーク -からだ)。 +からである)。 こうした作業を行う効率的な方法は、ダウンロードと SHA1 の計算を 同時に、交互に実行することである。そうすれば、プロセス全体が平行して @@ -12101,7 +12098,7 @@ File: coreutils-ja.info, Node: Working context, Next: User information, Prev: * pwd invocation:: 現在作業中のディレクトリを表示する。 * stty invocation:: 端末の諸特性を表示・変更する。 * printenv invocation:: 環境変数を表示する。 -* tty invocation:: 標準出力に接続している端末のファイル名を表示する。 +* tty invocation:: 標準入力に接続している端末のファイル名を表示する。  File: coreutils-ja.info, Node: pwd invocation, Next: stty invocation, Up: Working context @@ -12698,7 +12695,7 @@ options::.  File: coreutils-ja.info, Node: tty invocation, Prev: printenv invocation, Up: Working context -19.4 `tty': 標準出力に接続している端末のファイル名を表示する +19.4 `tty': 標準入力に接続している端末のファイル名を表示する ==================================================================================== `tty' は、自分の標準入力に接続している端末のファイル名を表示する。 @@ -14785,9 +14782,10 @@ File: coreutils-ja.info, Node: seq invocation, Prev: factor invocation, Up: N 指定されていない場合は、FIRST が LAST より大きい場合でも、デフォルトの `1' が INCREMENT として使用される。FIRST のデフォルトもまた `1' である。 従って、`seq 1' は `1' を表示するが、`seq 0' や `seq 10 5' は、何も出力 -しない。数列が終了するのは、現在の数値に INCREMENT を加えると LAST より -大きくなる時点である。だから、`seq 1 10 10' は、`1' しか表示しない。 -なお、数値には浮動小数点数を指定してもよい。*Note Floating point::. +しない。数列が終了するのは、現在の数値に INCREMENT を加えたら LAST より +大きくなってしまう時点である。だから、`seq 1 10 10' は、`1' しか表示 +しない。なお、数値には浮動小数点数を指定してもよい。*Note Floating +point::. このプログラムでは以下のオプションが使用できる。参照: *note Common options::. オプションはオペランドの前に置かなければならない。 @@ -16672,7 +16670,7 @@ info を参考にした。また、当然ながら、新しい man ページ ( coreutils-8.22 を元に増補・改訂 by 長南洋一 numfmt, ptx, tsort, chcon, runcon を翻訳 - * 2016-02-26 + * 2016-05-29 numfmt の章の構成を修正。訳文の訂正と細かい変更 by 長南洋一  @@ -17217,7 +17215,7 @@ Index * --binary: md5sum invocation. (line 43) * --block-size <1>: du invocation. (line 55) * --block-size <2>: df invocation. (line 68) -* --block-size: Block size. (line 151) +* --block-size: Block size. (line 150) * --block-size=SIZE: Block size. (line 12) * --body-numbering: nl invocation. (line 49) * --boot: who invocation. (line 41) @@ -17344,7 +17342,7 @@ Index * --format <3>: General options in numfmt. (line 23) * --format: od invocation. (line 94) -* --format=FORMAT <1>: seq invocation. (line 28) +* --format=FORMAT <1>: seq invocation. (line 29) * --format=FORMAT: stat invocation. (line 39) * --from <1>: chown invocation. (line 83) * --from: General options in numfmt. @@ -17384,7 +17382,7 @@ Index * --human-readable <2>: df invocation. (line 86) * --human-readable <3>: What information is listed. (line 122) -* --human-readable: Block size. (line 151) +* --human-readable: Block size. (line 150) * --ignore: nproc invocation. (line 26) * --ignore-backups: Which files are listed. (line 25) @@ -17640,7 +17638,7 @@ Index * --si <2>: df invocation. (line 207) * --si <3>: What information is listed. (line 273) -* --si: Block size. (line 151) +* --si: Block size. (line 150) * --signal: timeout invocation. (line 51) * --silent <1>: tty invocation. (line 19) * --silent <2>: chmod invocation. (line 51) @@ -17932,7 +17930,7 @@ Index * -F: pr invocation. (line 116) * -f <1>: od invocation. (line 198) * -f: nl invocation. (line 78) -* -f FORMAT: seq invocation. (line 28) +* -f FORMAT: seq invocation. (line 29) * -G: id invocation. (line 34) * -g <1>: id invocation. (line 30) * -g: stty invocation. (line 47) @@ -17971,7 +17969,7 @@ Index * -h <2>: pr invocation. (line 122) * -h: nl invocation. (line 82) * -H: Traversing symlinks. (line 20) -* -h: Block size. (line 151) +* -h: Block size. (line 150) * -i <1>: stdbuf invocation. (line 28) * -i <2>: env invocation. (line 101) * -i <3>: uname invocation. (line 43) @@ -18007,7 +18005,7 @@ Index (line 93) * -k <6>: sort invocation. (line 264) * -k <7>: csplit invocation. (line 90) -* -k: Block size. (line 151) +* -k: Block size. (line 150) * -l <1>: runcon invocation. (line 47) * -l: chcon invocation. (line 82) * -L: chcon invocation. (line 55) @@ -18802,10 +18800,10 @@ Index * evaluation of expressions: expr invocation. (line 6) * even parity: Control. (line 13) * evenp: Combination. (line 9) -* exabyte, definition of: Block size. (line 126) +* exabyte, definition of: Block size. (line 125) * examples of date: Examples of date. (line 6) * examples of expr: Examples of expr. (line 6) -* exbibyte, definition of: Block size. (line 130) +* exbibyte, definition of: Block size. (line 129) * excl: dd invocation. (line 156) * excluding files from du: du invocation. (line 282) * executable file check: Access permission tests. @@ -18927,7 +18925,7 @@ Index * force deletion: shred invocation. (line 114) * formatting file contents: Formatting file contents. (line 6) -* formatting of numbers in seq: seq invocation. (line 28) +* formatting of numbers in seq: seq invocation. (line 29) * formatting times <1>: date invocation. (line 21) * formatting times: pr invocation. (line 88) * fortnight in date strings: Relative items in date strings. @@ -18936,8 +18934,8 @@ Index * fullblock: dd invocation. (line 287) * general date syntax: General date syntax. (line 6) * general numeric sort: sort invocation. (line 123) -* gibibyte, definition of: Block size. (line 109) -* gigabyte, definition of: Block size. (line 105) +* gibibyte, definition of: Block size. (line 108) +* gigabyte, definition of: Block size. (line 104) * giving away permissions: Umask and Protection. (line 15) * GMT: Options for date. (line 111) @@ -19058,12 +19056,12 @@ Index * kernel name: uname invocation. (line 74) * kernel release: uname invocation. (line 70) * kernel version: uname invocation. (line 85) -* kibibyte, definition of: Block size. (line 91) +* kibibyte, definition of: Block size. (line 90) * kibibytes for file sizes: du invocation. (line 123) * kibibytes for file system sizes: df invocation. (line 103) * kill <1>: kill invocation. (line 6) * kill: Characters. (line 29) -* kilobyte, definition of: Block size. (line 86) +* kilobyte, definition of: Block size. (line 85) * Knuth, Donald E.: fmt invocation. (line 22) * language, in dates: General date syntax. (line 44) * last DAY <1>: Day of week items. (line 15) @@ -19084,7 +19082,7 @@ Index * LC_NUMERIC <1>: printf invocation. (line 65) * LC_NUMERIC <2>: sort invocation. (line 123) * LC_NUMERIC <3>: Floating point. (line 17) -* LC_NUMERIC: Block size. (line 64) +* LC_NUMERIC: Block size. (line 63) * LC_TIME <1>: date invocation. (line 11) * LC_TIME <2>: du invocation. (line 246) * LC_TIME <3>: Formatting file timestamps. @@ -19171,9 +19169,9 @@ Index * matching patterns: String expressions. (line 11) * MD5: md5sum invocation. (line 6) * md5sum: md5sum invocation. (line 6) -* mebibyte, definition of: Block size. (line 102) +* mebibyte, definition of: Block size. (line 101) * mebibytes for file sizes: du invocation. (line 138) -* megabyte, definition of: Block size. (line 98) +* megabyte, definition of: Block size. (line 97) * merging files: paste invocation. (line 6) * merging files in parallel: pr invocation. (line 6) * merging sorted files: sort invocation. (line 39) @@ -19385,7 +19383,7 @@ Index * PATH: env invocation. (line 24) * pathchk: pathchk invocation. (line 6) * pattern matching: String expressions. (line 11) -* pebibyte, definition of: Block size. (line 123) +* pebibyte, definition of: Block size. (line 122) * permission tests: Access permission tests. (line 6) * permissions of installed files, setting: install invocation. @@ -19396,7 +19394,7 @@ Index (line 47) * permissions, output by ls: What information is listed. (line 201) -* petabyte, definition of: Block size. (line 119) +* petabyte, definition of: Block size. (line 118) * phone directory order: sort invocation. (line 100) * pieces, splitting a file into: split invocation. (line 6) * Pinard, F. <1>: Authors of parse_datetime. @@ -19594,7 +19592,7 @@ Index * SELinux, setting/restoring security context: cp invocation. (line 435) * send a signal to processes: kill invocation. (line 6) * sentences and line-breaking: fmt invocation. (line 22) -* separator for numbers in seq: seq invocation. (line 46) +* separator for numbers in seq: seq invocation. (line 47) * seq: seq invocation. (line 6) * sequence of numbers: seq invocation. (line 6) * set-group-ID: Mode Structure. (line 53) @@ -19789,12 +19787,12 @@ Index * target directory <3>: install invocation. (line 140) * target directory <4>: cp invocation. (line 400) * target directory: Target directory. (line 6) -* tebibyte, definition of: Block size. (line 116) +* tebibyte, definition of: Block size. (line 115) * tee: tee invocation. (line 6) * telephone directory order: sort invocation. (line 100) * temporary directory: sort invocation. (line 390) * temporary files and directories: mktemp invocation. (line 6) -* terabyte, definition of: Block size. (line 112) +* terabyte, definition of: Block size. (line 111) * terminal check: File type tests. (line 35) * terminal file name, printing: tty invocation. (line 6) * terminal lines, currently used: who invocation. (line 12) @@ -19863,7 +19861,7 @@ Index * TZ <2>: Options for date. (line 111) * TZ <3>: date invocation. (line 17) * TZ <4>: who invocation. (line 27) -* TZ <5>: stat invocation. (line 214) +* TZ <5>: stat invocation. (line 213) * TZ <6>: touch invocation. (line 76) * TZ <7>: Formatting file timestamps. (line 19) @@ -19950,10 +19948,10 @@ Index * yesterday: Options for date. (line 11) * yesterday in date strings: Relative items in date strings. (line 29) -* yottabyte, definition of: Block size. (line 143) +* yottabyte, definition of: Block size. (line 142) * Youmans, B.: Introduction. (line 22) * zero-length string check: String tests. (line 15) -* zettabyte, definition of: Block size. (line 134) +* zettabyte, definition of: Block size. (line 133) * |: Relations for expr. (line 11) @@ -19965,224 +19963,224 @@ Node: Common options30563 Node: Exit status35498 Node: Backup options36669 Node: Block size39785 -Node: Floating point47879 -Node: Signal specifications49693 -Node: Disambiguating names and IDs53126 -Ref: Disambiguating names and IDs-Footnote-155658 -Node: Random sources55760 -Node: Target directory58116 -Node: Trailing slashes63444 -Node: Traversing symlinks65175 -Node: Treating / specially66977 -Node: Special built-in utilities69749 -Node: Standards conformance72094 -Node: Output of entire files74363 -Node: cat invocation75147 -Node: tac invocation77569 -Node: nl invocation79346 -Node: od invocation84676 -Node: base64 invocation94483 -Node: Formatting file contents96494 -Node: fmt invocation97106 -Node: numfmt invocation101354 -Node: General options in numfmt102756 -Node: Possible UNITs108614 -Node: Examples of using numfmt112541 -Node: pr invocation116781 -Node: fold invocation134363 -Node: Output of parts of files136472 -Node: head invocation137025 -Node: tail invocation140325 -Node: split invocation155847 -Node: csplit invocation166769 -Node: Summarizing files174092 -Node: wc invocation174993 -Node: sum invocation179564 -Node: cksum invocation181674 -Node: md5sum invocation183228 -Node: sha1sum invocation192762 -Node: sha2 utilities193828 -Node: Operating on sorted files194642 -Node: sort invocation195409 -Ref: sort invocation-Footnote-1235436 -Node: shuf invocation236301 -Node: uniq invocation240783 -Node: comm invocation249447 -Node: ptx invocation252971 -Node: General options in ptx258910 -Node: Charset selection in ptx259639 -Node: Input processing in ptx261122 -Node: Output formatting in ptx270433 -Node: Compatibility in ptx281348 -Node: tsort invocation286187 -Node: tsort background290605 -Node: Operating on fields293482 -Node: cut invocation293918 -Node: paste invocation299851 -Node: join invocation301995 -Node: Operating on characters312355 -Node: tr invocation312806 -Node: Character sets315354 -Node: Translating322072 -Node: Squeezing325091 -Node: expand invocation329551 -Node: unexpand invocation331768 -Node: Directory listing335215 -Node: ls invocation335827 -Ref: ls invocation-Footnote-1339426 -Node: Which files are listed339727 -Node: What information is listed345322 -Node: Sorting the output359030 -Node: Details about version sort362693 -Node: General output formatting365047 -Node: Formatting file timestamps372581 -Node: Formatting the file names380416 -Node: dir invocation384767 -Node: vdir invocation385392 -Node: dircolors invocation385894 -Node: Basic operations388383 -Node: cp invocation389236 -Node: dd invocation417633 -Node: install invocation438374 -Node: mv invocation447508 -Node: rm invocation454969 -Node: shred invocation462449 -Node: Special file types476921 -Node: link invocation479413 -Node: ln invocation481184 -Node: mkdir invocation495967 -Node: mkfifo invocation499988 -Node: mknod invocation502242 -Node: readlink invocation506440 -Node: rmdir invocation509559 -Node: unlink invocation511244 -Node: Changing file attributes512604 -Node: chown invocation513812 -Node: chgrp invocation522909 -Node: chmod invocation527413 -Node: touch invocation531599 -Node: Disk usage543048 -Node: df invocation544068 -Node: du invocation558753 -Node: stat invocation575747 -Node: sync invocation586174 -Node: truncate invocation587675 -Node: Printing text590178 -Node: echo invocation590644 -Node: printf invocation594440 -Node: yes invocation603400 -Node: Conditions604329 -Node: false invocation605075 -Node: true invocation606749 -Node: test invocation608700 -Node: File type tests611791 -Node: Access permission tests613035 -Node: File characteristic tests614202 -Node: String tests615193 -Node: Numeric tests616141 -Node: Connectives for test617360 -Node: expr invocation617787 -Node: String expressions621759 -Node: Numeric expressions625292 -Node: Relations for expr626053 -Node: Examples of expr627542 -Node: Redirection628559 -Node: tee invocation629234 -Node: File name manipulation636192 -Node: basename invocation636895 -Node: dirname invocation639669 -Node: pathchk invocation641914 -Node: mktemp invocation644622 -Node: realpath invocation653917 -Node: Working context658893 -Node: pwd invocation659684 -Node: stty invocation661658 -Node: Control665767 -Node: Input667383 -Node: Output669754 -Node: Local671620 -Node: Combination673927 -Node: Characters676676 -Node: Special679047 -Node: printenv invocation681249 -Node: tty invocation682600 -Node: User information683507 -Node: id invocation684327 -Node: logname invocation687605 -Node: whoami invocation688418 -Node: groups invocation688964 -Node: users invocation690680 -Node: who invocation691979 -Node: System context696229 -Node: date invocation697083 -Node: Time conversion specifiers699277 -Node: Date conversion specifiers702972 -Node: Literal conversion specifiers706772 -Node: Padding and other flags707120 -Node: Setting the time710060 -Node: Options for date711833 -Node: Examples of date717433 -Ref: %s-examples719159 -Node: arch invocation723391 -Node: nproc invocation723965 -Node: uname invocation725398 -Node: hostname invocation729389 -Node: hostid invocation730188 -Node: uptime invocation731143 -Node: SELinux context732739 -Node: chcon invocation733211 -Node: runcon invocation736506 -Node: Modified command invocation738856 -Node: chroot invocation740116 -Ref: chroot invocation-Footnote-1744418 -Node: env invocation744958 -Node: nice invocation750523 -Node: nohup invocation756360 -Node: stdbuf invocation760162 -Node: timeout invocation763826 -Node: Process control767617 -Node: kill invocation767855 -Node: Delaying772750 -Node: sleep invocation772967 -Node: Numeric operations774419 -Node: factor invocation774762 -Node: seq invocation777008 -Node: File permissions782612 -Node: Mode Structure783565 -Node: Symbolic Modes789536 -Node: Setting Permissions791115 -Node: Copying Permissions795209 -Node: Changing Special Mode Bits796297 -Node: Conditional Executability799408 -Node: Multiple Changes800317 -Node: Umask and Protection802758 -Node: Numeric Modes804696 -Node: Operator Numeric Modes807732 -Node: Directory Setuid and Setgid809174 -Node: Date input formats815046 -Node: General date syntax818931 -Node: Calendar date items823192 -Node: Time of day items825922 -Node: Time zone items828871 -Node: Combined date and time of day items830706 -Node: Day of week items831848 -Node: Relative items in date strings833620 -Node: Pure numbers in date strings837415 -Node: Seconds since the Epoch838880 -Node: Specifying time zone rules841235 -Node: Authors of parse_datetime844723 -Ref: Authors of get_date844911 -Node: Opening the software toolbox846183 -Node: Toolbox introduction847011 -Node: I/O redirection851228 -Node: The who command855808 -Node: The cut command857055 -Node: The sort command858488 -Node: The uniq command859474 -Node: Putting the tools together860452 -Ref: Putting the tools together-Footnote-1877800 -Node: About the translation877908 -Node: GNU Free Documentation License886384 -Node: Concept index911573 +Node: Floating point47759 +Node: Signal specifications49573 +Node: Disambiguating names and IDs52988 +Ref: Disambiguating names and IDs-Footnote-155520 +Node: Random sources55622 +Node: Target directory57978 +Node: Trailing slashes63306 +Node: Traversing symlinks65037 +Node: Treating / specially66839 +Node: Special built-in utilities69611 +Node: Standards conformance71956 +Node: Output of entire files74225 +Node: cat invocation75009 +Node: tac invocation77431 +Node: nl invocation79208 +Node: od invocation84538 +Node: base64 invocation94345 +Node: Formatting file contents96356 +Node: fmt invocation96968 +Node: numfmt invocation101216 +Node: General options in numfmt102618 +Node: Possible UNITs108476 +Node: Examples of using numfmt112403 +Node: pr invocation116643 +Node: fold invocation134225 +Node: Output of parts of files136334 +Node: head invocation136887 +Node: tail invocation140187 +Node: split invocation155709 +Node: csplit invocation166631 +Node: Summarizing files173954 +Node: wc invocation174855 +Node: sum invocation179426 +Node: cksum invocation181536 +Node: md5sum invocation183090 +Node: sha1sum invocation192624 +Node: sha2 utilities193690 +Node: Operating on sorted files194504 +Node: sort invocation195271 +Ref: sort invocation-Footnote-1235319 +Node: shuf invocation236184 +Node: uniq invocation240666 +Node: comm invocation249330 +Node: ptx invocation252854 +Node: General options in ptx258793 +Node: Charset selection in ptx259522 +Node: Input processing in ptx261005 +Node: Output formatting in ptx270316 +Node: Compatibility in ptx281231 +Node: tsort invocation286070 +Node: tsort background290488 +Node: Operating on fields293365 +Node: cut invocation293801 +Node: paste invocation299737 +Node: join invocation301881 +Node: Operating on characters312241 +Node: tr invocation312692 +Node: Character sets315240 +Node: Translating321958 +Node: Squeezing324977 +Node: expand invocation329437 +Node: unexpand invocation331654 +Node: Directory listing335101 +Node: ls invocation335713 +Ref: ls invocation-Footnote-1339312 +Node: Which files are listed339613 +Node: What information is listed345208 +Node: Sorting the output358916 +Node: Details about version sort362579 +Node: General output formatting364933 +Node: Formatting file timestamps372467 +Node: Formatting the file names380302 +Node: dir invocation384653 +Node: vdir invocation385278 +Node: dircolors invocation385780 +Node: Basic operations388269 +Node: cp invocation389122 +Node: dd invocation417519 +Node: install invocation438260 +Node: mv invocation447394 +Node: rm invocation454855 +Node: shred invocation462335 +Node: Special file types476807 +Node: link invocation479299 +Node: ln invocation481070 +Node: mkdir invocation495853 +Node: mkfifo invocation499874 +Node: mknod invocation502128 +Node: readlink invocation506326 +Node: rmdir invocation509445 +Node: unlink invocation511130 +Node: Changing file attributes512490 +Node: chown invocation513698 +Node: chgrp invocation522795 +Node: chmod invocation527299 +Node: touch invocation531485 +Node: Disk usage542934 +Node: df invocation543954 +Node: du invocation558639 +Node: stat invocation575633 +Node: sync invocation586022 +Node: truncate invocation587523 +Node: Printing text590026 +Node: echo invocation590492 +Node: printf invocation594288 +Node: yes invocation603248 +Node: Conditions604177 +Node: false invocation604923 +Node: true invocation606597 +Node: test invocation608548 +Node: File type tests611639 +Node: Access permission tests612883 +Node: File characteristic tests614050 +Node: String tests615041 +Node: Numeric tests615989 +Node: Connectives for test617208 +Node: expr invocation617635 +Node: String expressions621607 +Node: Numeric expressions625140 +Node: Relations for expr625901 +Node: Examples of expr627390 +Node: Redirection628407 +Node: tee invocation629082 +Node: File name manipulation636040 +Node: basename invocation636743 +Node: dirname invocation639517 +Node: pathchk invocation641762 +Node: mktemp invocation644470 +Node: realpath invocation653765 +Node: Working context658741 +Node: pwd invocation659532 +Node: stty invocation661506 +Node: Control665615 +Node: Input667231 +Node: Output669602 +Node: Local671468 +Node: Combination673775 +Node: Characters676524 +Node: Special678895 +Node: printenv invocation681097 +Node: tty invocation682448 +Node: User information683355 +Node: id invocation684175 +Node: logname invocation687453 +Node: whoami invocation688266 +Node: groups invocation688812 +Node: users invocation690528 +Node: who invocation691827 +Node: System context696077 +Node: date invocation696931 +Node: Time conversion specifiers699125 +Node: Date conversion specifiers702820 +Node: Literal conversion specifiers706620 +Node: Padding and other flags706968 +Node: Setting the time709908 +Node: Options for date711681 +Node: Examples of date717281 +Ref: %s-examples719007 +Node: arch invocation723239 +Node: nproc invocation723813 +Node: uname invocation725246 +Node: hostname invocation729237 +Node: hostid invocation730036 +Node: uptime invocation730991 +Node: SELinux context732587 +Node: chcon invocation733059 +Node: runcon invocation736354 +Node: Modified command invocation738704 +Node: chroot invocation739964 +Ref: chroot invocation-Footnote-1744266 +Node: env invocation744806 +Node: nice invocation750371 +Node: nohup invocation756208 +Node: stdbuf invocation760010 +Node: timeout invocation763674 +Node: Process control767465 +Node: kill invocation767703 +Node: Delaying772598 +Node: sleep invocation772815 +Node: Numeric operations774267 +Node: factor invocation774610 +Node: seq invocation776856 +Node: File permissions782472 +Node: Mode Structure783425 +Node: Symbolic Modes789396 +Node: Setting Permissions790975 +Node: Copying Permissions795069 +Node: Changing Special Mode Bits796157 +Node: Conditional Executability799268 +Node: Multiple Changes800177 +Node: Umask and Protection802618 +Node: Numeric Modes804556 +Node: Operator Numeric Modes807592 +Node: Directory Setuid and Setgid809034 +Node: Date input formats814906 +Node: General date syntax818791 +Node: Calendar date items823052 +Node: Time of day items825782 +Node: Time zone items828731 +Node: Combined date and time of day items830566 +Node: Day of week items831708 +Node: Relative items in date strings833480 +Node: Pure numbers in date strings837275 +Node: Seconds since the Epoch838740 +Node: Specifying time zone rules841095 +Node: Authors of parse_datetime844583 +Ref: Authors of get_date844771 +Node: Opening the software toolbox846043 +Node: Toolbox introduction846871 +Node: I/O redirection851088 +Node: The who command855668 +Node: The cut command856915 +Node: The sort command858348 +Node: The uniq command859334 +Node: Putting the tools together860312 +Ref: Putting the tools together-Footnote-1877660 +Node: About the translation877768 +Node: GNU Free Documentation License886244 +Node: Concept index911433  End Tag Table diff --git a/info/GNU_coreutils/release/coreutils-ja.texi b/info/GNU_coreutils/release/coreutils-ja.texi index 2cc34be5..de58c895 100644 --- a/info/GNU_coreutils/release/coreutils-ja.texi +++ b/info/GNU_coreutils/release/coreutils-ja.texi @@ -423,7 +423,7 @@ man ページに当ってみていただきたい。そちらの方が正しい * pwd invocation:: 現在作業中のディレクトリを表示する * stty invocation:: 端末の諸特性を表示・変更する * printenv invocation:: 環境変数のすべて、あるいは一部を表示する -* tty invocation:: 標準出力に接続している端末のファイル名を表示する +* tty invocation:: 標準入力に接続している端末のファイル名を表示する @command{stty}: 端末の諸特性を表示・変更する @@ -957,13 +957,12 @@ GNU プログラムには、ディスクの使用量を「ブロック数」で ブロックサイズの指定には、1 ブロックあたりのバイト数を示す正の整数を 使えばよい。あるいは、@code{human-readable} や @code{si} を指定して、「人間に読み -やすい」書式を選ぶこともできる。整数には接尾辞 (suffix) を付けることが -できるが、そうした接尾辞は、@samp{10} の累乗倍 (訳注: 10^3 倍、10^6 倍など) -を示す場合は、SI (国際単位系) の単位の前に付ける接頭辞 (prefix) の上位 -互換であり、@samp{2} の累乗倍 (訳注: 2^10 倍、2^20 倍など) を示す場合は、 +やすい」書式を選ぶこともできる。整数の後ろには接尾辞 (suffix) を +続けてもよい。そうした接尾辞は、単位の前に付けて @samp{10} の累乗倍を表す +SI (国際単位系) の接頭辞 (prefix) や、@samp{2} の累乗倍を表す ISO/IEC 80000-13 (以前は IEC 60027-2 だった) の接頭辞の上位互換である。 単位の前に付ける接頭辞については、次の URL を参照していただきたい。@* -@uref{http://www.bipm.org/en/si/si_brochure/chapter3/prefixes.html, SI +@uref{http://www.bipm.org/en/publications/si-brochure/chapter3.html, SI prefixes:}. @uref{http://physics.nist.gov/cuu/Units/binary.html, ISO/IEC 80000-13 prefixes:}. @@ -1123,7 +1122,7 @@ Library Reference Manual}. @item ABRT 6. プロセスの中断 (Process abort)。 @item KILL -9. 強制終了 (Kill) (キャッチすることも無視することもできない)。 +9. 強制終了 (Kill) (捕獲することも無視することもできない)。 @item ALRM 14. アラームクロック (Alarm Clock)。 @item TERM @@ -1151,8 +1150,7 @@ Library Reference Manual}. @item SEGV 無効なメモリ参照。 @item STOP -実行を一時停止する (stop) (キャッチすることも無視することも -できない)。 +実行を一時停止する (stop) (捕獲することも無視することもできない)。 @item TSTP 端末からの一時停止シグナル。 @item TTIN @@ -4506,10 +4504,10 @@ GNU の @command{sort} は黙って改行を追加する。なお、行末の改 @cindex phone directory order @cindex telephone directory order @vindex LC_CTYPE -電話帳 (@dfn{phone directory}) 順にソートする。ソートする際、表示可能 -文字、数字、空白以外のすべての文字を無視する。デフォルトの表示可能 -文字と数字は ASCII のそれであり、空白はスペースまたはタブだが、後者 -は @env{LC_CTYPE} のロケールによっては違うかもしれない。 +電話帳 (@dfn{phone directory}) 順にソートする。すなわち、ソートする際に +アルファベット、数字、空白以外のすべての文字を無視する。デフォルト +のアルファベットと数字は ASCII のそれであり、空白はスペースまたは +タブだが、後者は @env{LC_CTYPE} のロケールによっては違うかもしれない。 @item -f @itemx --ignore-case @@ -6381,7 +6379,7 @@ join -a1 -o 1.2,1.1 - /dev/null # 最初の 2 フィールドを逆に並べる @opindex -d @opindex --delimiter @option{-f} と併せて使うと、入力のフィールド区切りに @var{input_delim_byte} の -最初のバイトを使用する (デフォルトはタブ)。 +最初のバイトが使用される (デフォルトはタブ)。 @item -n @opindex -n @@ -12305,7 +12303,7 @@ du --inodes -x --threshold=20000 / @opindex --time @cindex last modified dates, displaying in @command{du} ディレクトリやそのサブディレクトリに存在するファイルについて表示 -する際に、その最終更新日時 (modification time) を表示する。 +する際に、その最終更新日時 (modification time) も表示する。 @sp 1 (訳注: 一つ留意していただきたいことがある。ディレクトリのタイム スタンプについては、そのディレクトリ以下にあるファイルのうち @@ -12578,7 +12576,7 @@ stat はデフォルトでは、シムリンクの参照を行わない (その @option{-L} を指定する必要がある)。 @item 引数としてデバイスノードが指定された場合、stat はファイルシステムの -リストを調べて、そのノードを見つけたりはせず、デバイスノードを直接 +リスト中にそのノードを捜し求めたりはせず、デバイスノードそのものを 動作の対象にする (訳注: すなわち、そのデバイス上に存在するファイル システムのマウントポイントではなく、デバイスノードそのもののマウント ポイントを表示する)。 @@ -12597,13 +12595,12 @@ stat を再帰的に呼び出すまでもない。@samp{stat -c "%m" newdir/@var newdir を表示する。また the current base mount point が「根底にある (すなわち、デバイスを最初にマウントした) マウントポイント」のこと なら、stat を再帰的に呼び出しても、それを突き止めることはできない。 -ひょっとすると、書式指定子に @samp{%m} が追加された coreutils-8.6 から -coreutils-8.20 あたりまでの stat を linux-2.6 時代の古いカーネルと -組み合わせて使ったときの動作を言っているのかもしれない。その場合は、 -@samp{stat -c "%m" newdir/@var{FILE}} は上記の olddir を出力するようだ。 -従って、そうした組み合わせでは、stat を再帰的に実行することで、 -最初にデバイスをマウントしたときのマウントポイントを知ることが -できる。) +ひょっとすると、書式指定子に @samp{%m} が追加された coreutils-8.6 以降の +stat を linux-2.6 時代の古いカーネルと組み合わせて使ったときの動作 +を言っているのかもしれない。その場合は、@samp{stat -c "%m" newdir/@var{FILE}} +は上記の olddir を出力するようだ。従って、そうした組み合わせでは、 +stat を再帰的に実行することで、最初にデバイスをマウントしたときの +マウントポイントを知ることができる。) @end itemize ファイルシステムの情報をリストする際には (すなわち、@option{--file-system} @@ -13791,10 +13788,10 @@ wget http://example.com/some.iso && sha1sum some.iso @end example 上記コマンドの問題点の一つは、ただでさえ時間のかかる SHA1 の計算に -取りかかる前に、ダウンロードが完了するのを待たなければならないことで -ある。たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて +取りかかる前に、ダウンロードが完了するのを待たなければならないことだ。 +たぶん、さらに問題なのは、上記のやり方では、DVD イメージを改めて 読み直さなければならないことだろう (一度目の読み込みは、ネットワーク -からだ)。 +からである)。 こうした作業を行う効率的な方法は、ダウンロードと SHA1 の計算を 同時に、交互に実行することである。そうすれば、プロセス全体が平行して @@ -14469,7 +14466,7 @@ realpath --relative-base=/usr /tmp /usr/bin * pwd invocation:: 現在作業中のディレクトリを表示する。 * stty invocation:: 端末の諸特性を表示・変更する。 * printenv invocation:: 環境変数を表示する。 -* tty invocation:: 標準出力に接続している端末のファイル名を表示する。 +* tty invocation:: 標準入力に接続している端末のファイル名を表示する。 @end menu @@ -15260,7 +15257,7 @@ printenv [@var{option}] [@var{variable}]@dots{} @node tty invocation -@section @command{tty}: 標準出力に接続している端末のファイル名を表示する +@section @command{tty}: 標準入力に接続している端末のファイル名を表示する @pindex tty @cindex print terminal file name @@ -17763,9 +17760,9 @@ seq [@var{option}]@dots{} @var{first} @var{increment} @var{last} 指定されていない場合は、@var{first} が @var{last} より大きい場合でも、デフォルトの @samp{1} が @var{increment} として使用される。@var{first} のデフォルトもまた @samp{1} である。 従って、@code{seq 1} は @samp{1} を表示するが、@code{seq 0} や @code{seq 10 5} は、何も出力 -しない。数列が終了するのは、現在の数値に @var{increment} を加えると @var{last} より -大きくなる時点である。だから、@code{seq 1 10 10} は、@samp{1} しか表示しない。 -なお、数値には浮動小数点数を指定してもよい。@xref{Floating point}. +しない。数列が終了するのは、現在の数値に @var{increment} を加えたら @var{last} より +大きくなってしまう時点である。だから、@code{seq 1 10 10} は、@samp{1} しか表示 +しない。なお、数値には浮動小数点数を指定してもよい。@xref{Floating point}. このプログラムでは以下のオプションが使用できる。参照: @ref{Common options}. オプションはオペランドの前に置かなければならない。 @@ -18603,7 +18600,7 @@ coreutils-8.22 を元に増補・改訂 by 長南洋一@* numfmt, ptx, tsort, chcon, runcon を翻訳 @item -2016-02-26@* +2016-05-29@* numfmt の章の構成を修正。訳文の訂正と細かい変更 by 長南洋一 @end itemize