-<?php
-// +-----------------------------------------------------------------------+
-// | Copyright (c) 2001-2002, Richard Heyes |
-// | All rights reserved. |
-// | |
-// | Redistribution and use in source and binary forms, with or without |
-// | modification, are permitted provided that the following conditions |
-// | are met: |
-// | |
-// | o Redistributions of source code must retain the above copyright |
-// | notice, this list of conditions and the following disclaimer. |
-// | o Redistributions in binary form must reproduce the above copyright |
-// | notice, this list of conditions and the following disclaimer in the |
-// | documentation and/or other materials provided with the distribution.|
-// | o The names of the authors may not be used to endorse or promote |
-// | products derived from this software without specific prior written |
-// | permission. |
-// | |
-// | THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
-// | "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
-// | LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
-// | A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
-// | OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
-// | SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
-// | LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
-// | DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
-// | THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
-// | (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
-// | OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
-// | |
-// +-----------------------------------------------------------------------+
-// | Authors: Richard Heyes <richard@phpguru.org> |
-// | Chuck Hagenbuch <chuck@horde.org> |
-// +-----------------------------------------------------------------------+
-
-/**
- * RFC 822 Email address list validation Utility
- *
- * What is it?
- *
- * This class will take an address string, and parse it into it's consituent
- * parts, be that either addresses, groups, or combinations. Nested groups
- * are not supported. The structure it returns is pretty straight forward,
- * and is similar to that provided by the imap_rfc822_parse_adrlist(). Use
- * print_r() to view the structure.
- *
- * How do I use it?
- *
- * $address_string = 'My Group: "Richard" <richard@localhost> (A comment), ted@example.com (Ted Bloggs), Barney;';
- * $structure = Mail_RFC822::parseAddressList($address_string, 'example.com', true)
- * print_r($structure);
- *
- * @author Richard Heyes <richard@phpguru.org>
- * @author Chuck Hagenbuch <chuck@horde.org>
- * @version $Revision: 1.1 $
- * @license BSD
- * @package Mail
- */
-class Mail_RFC822 {
-
- /**
- * The address being parsed by the RFC822 object.
- * @var string $address
- */
- var $address = '';
-
- /**
- * The default domain to use for unqualified addresses.
- * @var string $default_domain
- */
- var $default_domain = 'localhost';
-
- /**
- * Should we return a nested array showing groups, or flatten everything?
- * @var boolean $nestGroups
- */
- var $nestGroups = true;
-
- /**
- * Whether or not to validate atoms for non-ascii characters.
- * @var boolean $validate
- */
- var $validate = true;
-
- /**
- * The array of raw addresses built up as we parse.
- * @var array $addresses
- */
- var $addresses = array();
-
- /**
- * The final array of parsed address information that we build up.
- * @var array $structure
- */
- var $structure = array();
-
- /**
- * The current error message, if any.
- * @var string $error
- */
- var $error = null;
-
- /**
- * An internal counter/pointer.
- * @var integer $index
- */
- var $index = null;
-
- /**
- * The number of groups that have been found in the address list.
- * @var integer $num_groups
- * @access public
- */
- var $num_groups = 0;
-
- /**
- * A variable so that we can tell whether or not we're inside a
- * Mail_RFC822 object.
- * @var boolean $mailRFC822
- */
- var $mailRFC822 = true;
-
- /**
- * A limit after which processing stops
- * @var int $limit
- */
- var $limit = null;
-
- /**
- * Sets up the object. The address must either be set here or when
- * calling parseAddressList(). One or the other.
- *
- * @access public
- * @param string $address The address(es) to validate.
- * @param string $default_domain Default domain/host etc. If not supplied, will be set to localhost.
- * @param boolean $nest_groups Whether to return the structure with groups nested for easier viewing.
- * @param boolean $validate Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.
- *
- * @return object Mail_RFC822 A new Mail_RFC822 object.
- */
- function Mail_RFC822($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null)
- {
- if (isset($address)) $this->address = $address;
- if (isset($default_domain)) $this->default_domain = $default_domain;
- if (isset($nest_groups)) $this->nestGroups = $nest_groups;
- if (isset($validate)) $this->validate = $validate;
- if (isset($limit)) $this->limit = $limit;
- }
-
- /**
- * Starts the whole process. The address must either be set here
- * or when creating the object. One or the other.
- *
- * @access public
- * @param string $address The address(es) to validate.
- * @param string $default_domain Default domain/host etc.
- * @param boolean $nest_groups Whether to return the structure with groups nested for easier viewing.
- * @param boolean $validate Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.
- *
- * @return array A structured array of addresses.
- */
- function parseAddressList($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null)
- {
- if (!isset($this) || !isset($this->mailRFC822)) {
- $obj = new Mail_RFC822($address, $default_domain, $nest_groups, $validate, $limit);
- return $obj->parseAddressList();
- }
-
- if (isset($address)) $this->address = $address;
- if (isset($default_domain)) $this->default_domain = $default_domain;
- if (isset($nest_groups)) $this->nestGroups = $nest_groups;
- if (isset($validate)) $this->validate = $validate;
- if (isset($limit)) $this->limit = $limit;
-
- $this->structure = array();
- $this->addresses = array();
- $this->error = null;
- $this->index = null;
-
- // Unfold any long lines in $this->address.
- $this->address = preg_replace('/\r?\n/', "\r\n", $this->address);
- $this->address = preg_replace('/\r\n(\t| )+/', ' ', $this->address);
-
- while ($this->address = $this->_splitAddresses($this->address));
-
- if ($this->address === false || isset($this->error)) {
- require_once 'PEAR.php';
- return PEAR::raiseError($this->error);
- }
-
- // Validate each address individually. If we encounter an invalid
- // address, stop iterating and return an error immediately.
- foreach ($this->addresses as $address) {
- $valid = $this->_validateAddress($address);
-
- if ($valid === false || isset($this->error)) {
- require_once 'PEAR.php';
- return PEAR::raiseError($this->error);
- }
-
- if (!$this->nestGroups) {
- $this->structure = array_merge($this->structure, $valid);
- } else {
- $this->structure[] = $valid;
- }
- }
-
- return $this->structure;
- }
-
- /**
- * Splits an address into separate addresses.
- *
- * @access private
- * @param string $address The addresses to split.
- * @return boolean Success or failure.
- */
- function _splitAddresses($address)
- {
- if (!empty($this->limit) && count($this->addresses) == $this->limit) {
- return '';
- }
-
- if ($this->_isGroup($address) && !isset($this->error)) {
- $split_char = ';';
- $is_group = true;
- } elseif (!isset($this->error)) {
- $split_char = ',';
- $is_group = false;
- } elseif (isset($this->error)) {
- return false;
- }
-
- // Split the string based on the above ten or so lines.
- $parts = explode($split_char, $address);
- $string = $this->_splitCheck($parts, $split_char);
-
- // If a group...
- if ($is_group) {
- // If $string does not contain a colon outside of
- // brackets/quotes etc then something's fubar.
-
- // First check there's a colon at all:
- if (strpos($string, ':') === false) {
- $this->error = 'Invalid address: ' . $string;
- return false;
- }
-
- // Now check it's outside of brackets/quotes:
- if (!$this->_splitCheck(explode(':', $string), ':')) {
- return false;
- }
-
- // We must have a group at this point, so increase the counter:
- $this->num_groups++;
- }
-
- // $string now contains the first full address/group.
- // Add to the addresses array.
- $this->addresses[] = array(
- 'address' => trim($string),
- 'group' => $is_group
- );
-
- // Remove the now stored address from the initial line, the +1
- // is to account for the explode character.
- $address = trim(substr($address, strlen($string) + 1));
-
- // If the next char is a comma and this was a group, then
- // there are more addresses, otherwise, if there are any more
- // chars, then there is another address.
- if ($is_group && substr($address, 0, 1) == ','){
- $address = trim(substr($address, 1));
- return $address;
-
- } elseif (strlen($address) > 0) {
- return $address;
-
- } else {
- return '';
- }
-
- // If you got here then something's off
- return false;
- }
-
- /**
- * Checks for a group at the start of the string.
- *
- * @access private
- * @param string $address The address to check.
- * @return boolean Whether or not there is a group at the start of the string.
- */
- function _isGroup($address)
- {
- // First comma not in quotes, angles or escaped:
- $parts = explode(',', $address);
- $string = $this->_splitCheck($parts, ',');
-
- // Now we have the first address, we can reliably check for a
- // group by searching for a colon that's not escaped or in
- // quotes or angle brackets.
- if (count($parts = explode(':', $string)) > 1) {
- $string2 = $this->_splitCheck($parts, ':');
- return ($string2 !== $string);
- } else {
- return false;
- }
- }
-
- /**
- * A common function that will check an exploded string.
- *
- * @access private
- * @param array $parts The exloded string.
- * @param string $char The char that was exploded on.
- * @return mixed False if the string contains unclosed quotes/brackets, or the string on success.
- */
- function _splitCheck($parts, $char)
- {
- $string = $parts[0];
-
- for ($i = 0; $i < count($parts); $i++) {
- if ($this->_hasUnclosedQuotes($string)
- || $this->_hasUnclosedBrackets($string, '<>')
- || $this->_hasUnclosedBrackets($string, '[]')
- || $this->_hasUnclosedBrackets($string, '()')
- || substr($string, -1) == '\\') {
- if (isset($parts[$i + 1])) {
- $string = $string . $char . $parts[$i + 1];
- } else {
- $this->error = 'Invalid address spec. Unclosed bracket or quotes';
- return false;
- }
- } else {
- $this->index = $i;
- break;
- }
- }
-
- return $string;
- }
-
- /**
- * Checks if a string has an unclosed quotes or not.
- *
- * @access private
- * @param string $string The string to check.
- * @return boolean True if there are unclosed quotes inside the string, false otherwise.
- */
- function _hasUnclosedQuotes($string)
- {
- $string = explode('"', $string);
- $string_cnt = count($string);
-
- for ($i = 0; $i < (count($string) - 1); $i++)
- if (substr($string[$i], -1) == '\\')
- $string_cnt--;
-
- return ($string_cnt % 2 === 0);
- }
-
- /**
- * Checks if a string has an unclosed brackets or not. IMPORTANT:
- * This function handles both angle brackets and square brackets;
- *
- * @access private
- * @param string $string The string to check.
- * @param string $chars The characters to check for.
- * @return boolean True if there are unclosed brackets inside the string, false otherwise.
- */
- function _hasUnclosedBrackets($string, $chars)
- {
- $num_angle_start = substr_count($string, $chars[0]);
- $num_angle_end = substr_count($string, $chars[1]);
-
- $this->_hasUnclosedBracketsSub($string, $num_angle_start, $chars[0]);
- $this->_hasUnclosedBracketsSub($string, $num_angle_end, $chars[1]);
-
- if ($num_angle_start < $num_angle_end) {
- $this->error = 'Invalid address spec. Unmatched quote or bracket (' . $chars . ')';
- return false;
- } else {
- return ($num_angle_start > $num_angle_end);
- }
- }
-
- /**
- * Sub function that is used only by hasUnclosedBrackets().
- *
- * @access private
- * @param string $string The string to check.
- * @param integer &$num The number of occurences.
- * @param string $char The character to count.
- * @return integer The number of occurences of $char in $string, adjusted for backslashes.
- */
- function _hasUnclosedBracketsSub($string, &$num, $char)
- {
- $parts = explode($char, $string);
- for ($i = 0; $i < count($parts); $i++){
- if (substr($parts[$i], -1) == '\\' || $this->_hasUnclosedQuotes($parts[$i]))
- $num--;
- if (isset($parts[$i + 1]))
- $parts[$i + 1] = $parts[$i] . $char . $parts[$i + 1];
- }
-
- return $num;
- }
-
- /**
- * Function to begin checking the address.
- *
- * @access private
- * @param string $address The address to validate.
- * @return mixed False on failure, or a structured array of address information on success.
- */
- function _validateAddress($address)
- {
- $is_group = false;
- $addresses = array();
-
- if ($address['group']) {
- $is_group = true;
-
- // Get the group part of the name
- $parts = explode(':', $address['address']);
- $groupname = $this->_splitCheck($parts, ':');
- $structure = array();
-
- // And validate the group part of the name.
- if (!$this->_validatePhrase($groupname)){
- $this->error = 'Group name did not validate.';
- return false;
- } else {
- // Don't include groups if we are not nesting
- // them. This avoids returning invalid addresses.
- if ($this->nestGroups) {
- $structure = new stdClass;
- $structure->groupname = $groupname;
- }
- }
-
- $address['address'] = ltrim(substr($address['address'], strlen($groupname . ':')));
- }
-
- // If a group then split on comma and put into an array.
- // Otherwise, Just put the whole address in an array.
- if ($is_group) {
- while (strlen($address['address']) > 0) {
- $parts = explode(',', $address['address']);
- $addresses[] = $this->_splitCheck($parts, ',');
- $address['address'] = trim(substr($address['address'], strlen(end($addresses) . ',')));
- }
- } else {
- $addresses[] = $address['address'];
- }
-
- // Check that $addresses is set, if address like this:
- // Groupname:;
- // Then errors were appearing.
- if (!count($addresses)){
- $this->error = 'Empty group.';
- return false;
- }
-
- // Trim the whitespace from all of the address strings.
- array_map('trim', $addresses);
-
- // Validate each mailbox.
- // Format could be one of: name <geezer@domain.com>
- // geezer@domain.com
- // geezer
- // ... or any other format valid by RFC 822.
- for ($i = 0; $i < count($addresses); $i++) {
- if (!$this->validateMailbox($addresses[$i])) {
- if (empty($this->error)) {
- $this->error = 'Validation failed for: ' . $addresses[$i];
- }
- return false;
- }
- }
-
- // Nested format
- if ($this->nestGroups) {
- if ($is_group) {
- $structure->addresses = $addresses;
- } else {
- $structure = $addresses[0];
- }
-
- // Flat format
- } else {
- if ($is_group) {
- $structure = array_merge($structure, $addresses);
- } else {
- $structure = $addresses;
- }
- }
-
- return $structure;
- }
-
- /**
- * Function to validate a phrase.
- *
- * @access private
- * @param string $phrase The phrase to check.
- * @return boolean Success or failure.
- */
- function _validatePhrase($phrase)
- {
- // Splits on one or more Tab or space.
- $parts = preg_split('/[ \\x09]+/', $phrase, -1, PREG_SPLIT_NO_EMPTY);
-
- $phrase_parts = array();
- while (count($parts) > 0){
- $phrase_parts[] = $this->_splitCheck($parts, ' ');
- for ($i = 0; $i < $this->index + 1; $i++)
- array_shift($parts);
- }
-
- foreach ($phrase_parts as $part) {
- // If quoted string:
- if (substr($part, 0, 1) == '"') {
- if (!$this->_validateQuotedString($part)) {
- return false;
- }
- continue;
- }
-
- // Otherwise it's an atom:
- if (!$this->_validateAtom($part)) return false;
- }
-
- return true;
- }
-
- /**
- * Function to validate an atom which from rfc822 is:
- * atom = 1*<any CHAR except specials, SPACE and CTLs>
- *
- * If validation ($this->validate) has been turned off, then
- * validateAtom() doesn't actually check anything. This is so that you
- * can split a list of addresses up before encoding personal names
- * (umlauts, etc.), for example.
- *
- * @access private
- * @param string $atom The string to check.
- * @return boolean Success or failure.
- */
- function _validateAtom($atom)
- {
- if (!$this->validate) {
- // Validation has been turned off; assume the atom is okay.
- return true;
- }
-
- // Check for any char from ASCII 0 - ASCII 127
- if (!preg_match('/^[\\x00-\\x7E]+$/i', $atom, $matches)) {
- return false;
- }
-
- // Check for specials:
- if (preg_match('/[][()<>@,;\\:". ]/', $atom)) {
- return false;
- }
-
- // Check for control characters (ASCII 0-31):
- if (preg_match('/[\\x00-\\x1F]+/', $atom)) {
- return false;
- }
-
- return true;
- }
-
- /**
- * Function to validate quoted string, which is:
- * quoted-string = <"> *(qtext/quoted-pair) <">
- *
- * @access private
- * @param string $qstring The string to check
- * @return boolean Success or failure.
- */
- function _validateQuotedString($qstring)
- {
- // Leading and trailing "
- $qstring = substr($qstring, 1, -1);
-
- // Perform check, removing quoted characters first.
- return !preg_match('/[\x0D\\\\"]/', preg_replace('/\\\\./', '', $qstring));
- }
-
- /**
- * Function to validate a mailbox, which is:
- * mailbox = addr-spec ; simple address
- * / phrase route-addr ; name and route-addr
- *
- * @access public
- * @param string &$mailbox The string to check.
- * @return boolean Success or failure.
- */
- function validateMailbox(&$mailbox)
- {
- // A couple of defaults.
- $phrase = '';
- $comment = '';
- $comments = array();
-
- // Catch any RFC822 comments and store them separately.
- $_mailbox = $mailbox;
- while (strlen(trim($_mailbox)) > 0) {
- $parts = explode('(', $_mailbox);
- $before_comment = $this->_splitCheck($parts, '(');
- if ($before_comment != $_mailbox) {
- // First char should be a (.
- $comment = substr(str_replace($before_comment, '', $_mailbox), 1);
- $parts = explode(')', $comment);
- $comment = $this->_splitCheck($parts, ')');
- $comments[] = $comment;
-
- // +1 is for the trailing )
- $_mailbox = substr($_mailbox, strpos($_mailbox, $comment)+strlen($comment)+1);
- } else {
- break;
- }
- }
-
- foreach ($comments as $comment) {
- $mailbox = str_replace("($comment)", '', $mailbox);
- }
-
- $mailbox = trim($mailbox);
-
- // Check for name + route-addr
- if (substr($mailbox, -1) == '>' && substr($mailbox, 0, 1) != '<') {
- $parts = explode('<', $mailbox);
- $name = $this->_splitCheck($parts, '<');
-
- $phrase = trim($name);
- $route_addr = trim(substr($mailbox, strlen($name.'<'), -1));
-
- if ($this->_validatePhrase($phrase) === false || ($route_addr = $this->_validateRouteAddr($route_addr)) === false) {
- return false;
- }
-
- // Only got addr-spec
- } else {
- // First snip angle brackets if present.
- if (substr($mailbox, 0, 1) == '<' && substr($mailbox, -1) == '>') {
- $addr_spec = substr($mailbox, 1, -1);
- } else {
- $addr_spec = $mailbox;
- }
-
- if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
- return false;
- }
- }
-
- // Construct the object that will be returned.
- $mbox = new stdClass();
-
- // Add the phrase (even if empty) and comments
- $mbox->personal = $phrase;
- $mbox->comment = isset($comments) ? $comments : array();
-
- if (isset($route_addr)) {
- $mbox->mailbox = $route_addr['local_part'];
- $mbox->host = $route_addr['domain'];
- $route_addr['adl'] !== '' ? $mbox->adl = $route_addr['adl'] : '';
- } else {
- $mbox->mailbox = $addr_spec['local_part'];
- $mbox->host = $addr_spec['domain'];
- }
-
- $mailbox = $mbox;
- return true;
- }
-
- /**
- * This function validates a route-addr which is:
- * route-addr = "<" [route] addr-spec ">"
- *
- * Angle brackets have already been removed at the point of
- * getting to this function.
- *
- * @access private
- * @param string $route_addr The string to check.
- * @return mixed False on failure, or an array containing validated address/route information on success.
- */
- function _validateRouteAddr($route_addr)
- {
- // Check for colon.
- if (strpos($route_addr, ':') !== false) {
- $parts = explode(':', $route_addr);
- $route = $this->_splitCheck($parts, ':');
- } else {
- $route = $route_addr;
- }
-
- // If $route is same as $route_addr then the colon was in
- // quotes or brackets or, of course, non existent.
- if ($route === $route_addr){
- unset($route);
- $addr_spec = $route_addr;
- if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
- return false;
- }
- } else {
- // Validate route part.
- if (($route = $this->_validateRoute($route)) === false) {
- return false;
- }
-
- $addr_spec = substr($route_addr, strlen($route . ':'));
-
- // Validate addr-spec part.
- if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
- return false;
- }
- }
-
- if (isset($route)) {
- $return['adl'] = $route;
- } else {
- $return['adl'] = '';
- }
-
- $return = array_merge($return, $addr_spec);
- return $return;
- }
-
- /**
- * Function to validate a route, which is:
- * route = 1#("@" domain) ":"
- *
- * @access private
- * @param string $route The string to check.
- * @return mixed False on failure, or the validated $route on success.
- */
- function _validateRoute($route)
- {
- // Split on comma.
- $domains = explode(',', trim($route));
-
- foreach ($domains as $domain) {
- $domain = str_replace('@', '', trim($domain));
- if (!$this->_validateDomain($domain)) return false;
- }
-
- return $route;
- }
-
- /**
- * Function to validate a domain, though this is not quite what
- * you expect of a strict internet domain.
- *
- * domain = sub-domain *("." sub-domain)
- *
- * @access private
- * @param string $domain The string to check.
- * @return mixed False on failure, or the validated domain on success.
- */
- function _validateDomain($domain)
- {
- // Note the different use of $subdomains and $sub_domains
- $subdomains = explode('.', $domain);
-
- while (count($subdomains) > 0) {
- $sub_domains[] = $this->_splitCheck($subdomains, '.');
- for ($i = 0; $i < $this->index + 1; $i++)
- array_shift($subdomains);
- }
-
- foreach ($sub_domains as $sub_domain) {
- if (!$this->_validateSubdomain(trim($sub_domain)))
- return false;
- }
-
- // Managed to get here, so return input.
- return $domain;
- }
-
- /**
- * Function to validate a subdomain:
- * subdomain = domain-ref / domain-literal
- *
- * @access private
- * @param string $subdomain The string to check.
- * @return boolean Success or failure.
- */
- function _validateSubdomain($subdomain)
- {
- if (preg_match('|^\[(.*)]$|', $subdomain, $arr)){
- if (!$this->_validateDliteral($arr[1])) return false;
- } else {
- if (!$this->_validateAtom($subdomain)) return false;
- }
-
- // Got here, so return successful.
- return true;
- }
-
- /**
- * Function to validate a domain literal:
- * domain-literal = "[" *(dtext / quoted-pair) "]"
- *
- * @access private
- * @param string $dliteral The string to check.
- * @return boolean Success or failure.
- */
- function _validateDliteral($dliteral)
- {
- return !preg_match('/(.)[][\x0D\\\\]/', $dliteral, $matches) && $matches[1] != '\\';
- }
-
- /**
- * Function to validate an addr-spec.
- *
- * addr-spec = local-part "@" domain
- *
- * @access private
- * @param string $addr_spec The string to check.
- * @return mixed False on failure, or the validated addr-spec on success.
- */
- function _validateAddrSpec($addr_spec)
- {
- $addr_spec = trim($addr_spec);
-
- // Split on @ sign if there is one.
- if (strpos($addr_spec, '@') !== false) {
- $parts = explode('@', $addr_spec);
- $local_part = $this->_splitCheck($parts, '@');
- $domain = substr($addr_spec, strlen($local_part . '@'));
-
- // No @ sign so assume the default domain.
- } else {
- $local_part = $addr_spec;
- $domain = $this->default_domain;
- }
-
- if (($local_part = $this->_validateLocalPart($local_part)) === false) return false;
- if (($domain = $this->_validateDomain($domain)) === false) return false;
-
- // Got here so return successful.
- return array('local_part' => $local_part, 'domain' => $domain);
- }
-
- /**
- * Function to validate the local part of an address:
- * local-part = word *("." word)
- *
- * @access private
- * @param string $local_part
- * @return mixed False on failure, or the validated local part on success.
- */
- function _validateLocalPart($local_part)
- {
- $parts = explode('.', $local_part);
- $words = array();
-
- // Split the local_part into words.
- while (count($parts) > 0){
- $words[] = $this->_splitCheck($parts, '.');
- for ($i = 0; $i < $this->index + 1; $i++) {
- array_shift($parts);
- }
- }
-
- // Validate each word.
- foreach ($words as $word) {
- // If this word contains an unquoted space, it is invalid. (6.2.4)
- if (strpos($word, ' ') && $word[0] !== '"')
- {
- return false;
- }
-
- if ($this->_validatePhrase(trim($word)) === false) return false;
- }
-
- // Managed to get here, so return the input.
- return $local_part;
- }
-
- /**
- * Returns an approximate count of how many addresses are in the
- * given string. This is APPROXIMATE as it only splits based on a
- * comma which has no preceding backslash. Could be useful as
- * large amounts of addresses will end up producing *large*
- * structures when used with parseAddressList().
- *
- * @param string $data Addresses to count
- * @return int Approximate count
- */
- function approximateCount($data)
- {
- return count(preg_split('/(?<!\\\\),/', $data));
- }
-
- /**
- * This is a email validating function separate to the rest of the
- * class. It simply validates whether an email is of the common
- * internet form: <user>@<domain>. This can be sufficient for most
- * people. Optional stricter mode can be utilised which restricts
- * mailbox characters allowed to alphanumeric, full stop, hyphen
- * and underscore.
- *
- * @param string $data Address to check
- * @param boolean $strict Optional stricter mode
- * @return mixed False if it fails, an indexed array
- * username/domain if it matches
- */
- function isValidInetAddress($data, $strict = false)
- {
- $regex = $strict ? '/^([.0-9a-z_+-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,4})$/i' : '/^([*+!.&#$|\'\\%\/0-9a-z^_`{}=?~:-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,4})$/i';
- if (preg_match($regex, trim($data), $matches)) {
- return array($matches[1], $matches[2]);
- } else {
- return false;
- }
- }
-
-}
+<?php\r
+// +-----------------------------------------------------------------------+\r
+// | Copyright (c) 2001-2002, Richard Heyes |\r
+// | All rights reserved. |\r
+// | |\r
+// | Redistribution and use in source and binary forms, with or without |\r
+// | modification, are permitted provided that the following conditions |\r
+// | are met: |\r
+// | |\r
+// | o Redistributions of source code must retain the above copyright |\r
+// | notice, this list of conditions and the following disclaimer. |\r
+// | o Redistributions in binary form must reproduce the above copyright |\r
+// | notice, this list of conditions and the following disclaimer in the |\r
+// | documentation and/or other materials provided with the distribution.|\r
+// | o The names of the authors may not be used to endorse or promote |\r
+// | products derived from this software without specific prior written |\r
+// | permission. |\r
+// | |\r
+// | THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |\r
+// | "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |\r
+// | LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |\r
+// | A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |\r
+// | OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |\r
+// | SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |\r
+// | LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |\r
+// | DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |\r
+// | THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |\r
+// | (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |\r
+// | OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |\r
+// | |\r
+// +-----------------------------------------------------------------------+\r
+// | Authors: Richard Heyes <richard@phpguru.org> |\r
+// | Chuck Hagenbuch <chuck@horde.org> |\r
+// +-----------------------------------------------------------------------+\r
+\r
+/**\r
+ * RFC 822 Email address list validation Utility\r
+ *\r
+ * What is it?\r
+ *\r
+ * This class will take an address string, and parse it into it's consituent\r
+ * parts, be that either addresses, groups, or combinations. Nested groups\r
+ * are not supported. The structure it returns is pretty straight forward,\r
+ * and is similar to that provided by the imap_rfc822_parse_adrlist(). Use\r
+ * print_r() to view the structure.\r
+ *\r
+ * How do I use it?\r
+ *\r
+ * $address_string = 'My Group: "Richard" <richard@localhost> (A comment), ted@example.com (Ted Bloggs), Barney;';\r
+ * $structure = Mail_RFC822::parseAddressList($address_string, 'example.com', true)\r
+ * print_r($structure);\r
+ *\r
+ * @author Richard Heyes <richard@phpguru.org>\r
+ * @author Chuck Hagenbuch <chuck@horde.org>\r
+ * @version $Revision: 1.7 $\r
+ * @license BSD\r
+ * @package Mail\r
+ */\r
+class Mail_RFC822 {\r
+\r
+ /**\r
+ * The address being parsed by the RFC822 object.\r
+ * @var string $address\r
+ */\r
+ var $address = '';\r
+\r
+ /**\r
+ * The default domain to use for unqualified addresses.\r
+ * @var string $default_domain\r
+ */\r
+ var $default_domain = 'localhost';\r
+\r
+ /**\r
+ * Should we return a nested array showing groups, or flatten everything?\r
+ * @var boolean $nestGroups\r
+ */\r
+ var $nestGroups = true;\r
+\r
+ /**\r
+ * Whether or not to validate atoms for non-ascii characters.\r
+ * @var boolean $validate\r
+ */\r
+ var $validate = true;\r
+\r
+ /**\r
+ * The array of raw addresses built up as we parse.\r
+ * @var array $addresses\r
+ */\r
+ var $addresses = array();\r
+\r
+ /**\r
+ * The final array of parsed address information that we build up.\r
+ * @var array $structure\r
+ */\r
+ var $structure = array();\r
+\r
+ /**\r
+ * The current error message, if any.\r
+ * @var string $error\r
+ */\r
+ var $error = null;\r
+\r
+ /**\r
+ * An internal counter/pointer.\r
+ * @var integer $index\r
+ */\r
+ var $index = null;\r
+\r
+ /**\r
+ * The number of groups that have been found in the address list.\r
+ * @var integer $num_groups\r
+ * @access public\r
+ */\r
+ var $num_groups = 0;\r
+\r
+ /**\r
+ * A variable so that we can tell whether or not we're inside a\r
+ * Mail_RFC822 object.\r
+ * @var boolean $mailRFC822\r
+ */\r
+ var $mailRFC822 = true;\r
+\r
+ /**\r
+ * A limit after which processing stops\r
+ * @var int $limit\r
+ */\r
+ var $limit = null;\r
+\r
+ /**\r
+ * Sets up the object. The address must either be set here or when\r
+ * calling parseAddressList(). One or the other.\r
+ *\r
+ * @access public\r
+ * @param string $address The address(es) to validate.\r
+ * @param string $default_domain Default domain/host etc. If not supplied, will be set to localhost.\r
+ * @param boolean $nest_groups Whether to return the structure with groups nested for easier viewing.\r
+ * @param boolean $validate Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.\r
+ *\r
+ * @return object Mail_RFC822 A new Mail_RFC822 object.\r
+ */\r
+ function Mail_RFC822($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null)\r
+ {\r
+ if (isset($address)) $this->address = $address;\r
+ if (isset($default_domain)) $this->default_domain = $default_domain;\r
+ if (isset($nest_groups)) $this->nestGroups = $nest_groups;\r
+ if (isset($validate)) $this->validate = $validate;\r
+ if (isset($limit)) $this->limit = $limit;\r
+ }\r
+\r
+ /**\r
+ * Starts the whole process. The address must either be set here\r
+ * or when creating the object. One or the other.\r
+ *\r
+ * @access public\r
+ * @param string $address The address(es) to validate.\r
+ * @param string $default_domain Default domain/host etc.\r
+ * @param boolean $nest_groups Whether to return the structure with groups nested for easier viewing.\r
+ * @param boolean $validate Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.\r
+ *\r
+ * @return array A structured array of addresses.\r
+ */\r
+ function parseAddressList($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null)\r
+ {\r
+ if (!isset($this) || !isset($this->mailRFC822)) {\r
+ $obj = new Mail_RFC822($address, $default_domain, $nest_groups, $validate, $limit);\r
+ return $obj->parseAddressList();\r
+ }\r
+\r
+ if (isset($address)) $this->address = $address;\r
+ if (isset($default_domain)) $this->default_domain = $default_domain;\r
+ if (isset($nest_groups)) $this->nestGroups = $nest_groups;\r
+ if (isset($validate)) $this->validate = $validate;\r
+ if (isset($limit)) $this->limit = $limit;\r
+\r
+ $this->structure = array();\r
+ $this->addresses = array();\r
+ $this->error = null;\r
+ $this->index = null;\r
+\r
+ // Unfold any long lines in $this->address.\r
+ $this->address = preg_replace('/\r?\n/', "\r\n", $this->address);\r
+ $this->address = preg_replace('/\r\n(\t| )+/', ' ', $this->address);\r
+\r
+ while ($this->address = $this->_splitAddresses($this->address));\r
+\r
+ if ($this->address === false || isset($this->error)) {\r
+ require_once 'PEAR.php';\r
+ return PEAR::raiseError($this->error);\r
+ }\r
+\r
+ // Validate each address individually. If we encounter an invalid\r
+ // address, stop iterating and return an error immediately.\r
+ foreach ($this->addresses as $address) {\r
+ $valid = $this->_validateAddress($address);\r
+\r
+ if ($valid === false || isset($this->error)) {\r
+ require_once 'PEAR.php';\r
+ return PEAR::raiseError($this->error);\r
+ }\r
+\r
+ if (!$this->nestGroups) {\r
+ $this->structure = array_merge($this->structure, $valid);\r
+ } else {\r
+ $this->structure[] = $valid;\r
+ }\r
+ }\r
+\r
+ return $this->structure;\r
+ }\r
+\r
+ /**\r
+ * Splits an address into separate addresses.\r
+ *\r
+ * @access private\r
+ * @param string $address The addresses to split.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _splitAddresses($address)\r
+ {\r
+ if (!empty($this->limit) && count($this->addresses) == $this->limit) {\r
+ return '';\r
+ }\r
+\r
+ if ($this->_isGroup($address) && !isset($this->error)) {\r
+ $split_char = ';';\r
+ $is_group = true;\r
+ } elseif (!isset($this->error)) {\r
+ $split_char = ',';\r
+ $is_group = false;\r
+ } elseif (isset($this->error)) {\r
+ return false;\r
+ }\r
+\r
+ // Split the string based on the above ten or so lines.\r
+ $parts = explode($split_char, $address);\r
+ $string = $this->_splitCheck($parts, $split_char);\r
+\r
+ // If a group...\r
+ if ($is_group) {\r
+ // If $string does not contain a colon outside of\r
+ // brackets/quotes etc then something's fubar.\r
+\r
+ // First check there's a colon at all:\r
+ if (strpos($string, ':') === false) {\r
+ $this->error = 'Invalid address: ' . $string;\r
+ return false;\r
+ }\r
+\r
+ // Now check it's outside of brackets/quotes:\r
+ if (!$this->_splitCheck(explode(':', $string), ':')) {\r
+ return false;\r
+ }\r
+\r
+ // We must have a group at this point, so increase the counter:\r
+ $this->num_groups++;\r
+ }\r
+\r
+ // $string now contains the first full address/group.\r
+ // Add to the addresses array.\r
+ $this->addresses[] = array(\r
+ 'address' => trim($string),\r
+ 'group' => $is_group\r
+ );\r
+\r
+ // Remove the now stored address from the initial line, the +1\r
+ // is to account for the explode character.\r
+ $address = trim(substr($address, strlen($string) + 1));\r
+\r
+ // If the next char is a comma and this was a group, then\r
+ // there are more addresses, otherwise, if there are any more\r
+ // chars, then there is another address.\r
+ if ($is_group && substr($address, 0, 1) == ','){\r
+ $address = trim(substr($address, 1));\r
+ return $address;\r
+\r
+ } elseif (strlen($address) > 0) {\r
+ return $address;\r
+\r
+ } else {\r
+ return '';\r
+ }\r
+\r
+ // If you got here then something's off\r
+ return false;\r
+ }\r
+\r
+ /**\r
+ * Checks for a group at the start of the string.\r
+ *\r
+ * @access private\r
+ * @param string $address The address to check.\r
+ * @return boolean Whether or not there is a group at the start of the string.\r
+ */\r
+ function _isGroup($address)\r
+ {\r
+ // First comma not in quotes, angles or escaped:\r
+ $parts = explode(',', $address);\r
+ $string = $this->_splitCheck($parts, ',');\r
+\r
+ // Now we have the first address, we can reliably check for a\r
+ // group by searching for a colon that's not escaped or in\r
+ // quotes or angle brackets.\r
+ if (count($parts = explode(':', $string)) > 1) {\r
+ $string2 = $this->_splitCheck($parts, ':');\r
+ return ($string2 !== $string);\r
+ } else {\r
+ return false;\r
+ }\r
+ }\r
+\r
+ /**\r
+ * A common function that will check an exploded string.\r
+ *\r
+ * @access private\r
+ * @param array $parts The exloded string.\r
+ * @param string $char The char that was exploded on.\r
+ * @return mixed False if the string contains unclosed quotes/brackets, or the string on success.\r
+ */\r
+ function _splitCheck($parts, $char)\r
+ {\r
+ $string = $parts[0];\r
+\r
+ for ($i = 0; $i < count($parts); $i++) {\r
+ if ($this->_hasUnclosedQuotes($string)\r
+ || $this->_hasUnclosedBrackets($string, '<>')\r
+ || $this->_hasUnclosedBrackets($string, '[]')\r
+ || $this->_hasUnclosedBrackets($string, '()')\r
+ || substr($string, -1) == '\\') {\r
+ if (isset($parts[$i + 1])) {\r
+ $string = $string . $char . $parts[$i + 1];\r
+ } else {\r
+ $this->error = 'Invalid address spec. Unclosed bracket or quotes';\r
+ return false;\r
+ }\r
+ } else {\r
+ $this->index = $i;\r
+ break;\r
+ }\r
+ }\r
+\r
+ return $string;\r
+ }\r
+\r
+ /**\r
+ * Checks if a string has an unclosed quotes or not.\r
+ *\r
+ * @access private\r
+ * @param string $string The string to check.\r
+ * @return boolean True if there are unclosed quotes inside the string, false otherwise.\r
+ */\r
+ function _hasUnclosedQuotes($string)\r
+ {\r
+ $string = explode('"', $string);\r
+ $string_cnt = count($string);\r
+\r
+ for ($i = 0; $i < (count($string) - 1); $i++)\r
+ if (substr($string[$i], -1) == '\\')\r
+ $string_cnt--;\r
+\r
+ return ($string_cnt % 2 === 0);\r
+ }\r
+\r
+ /**\r
+ * Checks if a string has an unclosed brackets or not. IMPORTANT:\r
+ * This function handles both angle brackets and square brackets;\r
+ *\r
+ * @access private\r
+ * @param string $string The string to check.\r
+ * @param string $chars The characters to check for.\r
+ * @return boolean True if there are unclosed brackets inside the string, false otherwise.\r
+ */\r
+ function _hasUnclosedBrackets($string, $chars)\r
+ {\r
+ $num_angle_start = substr_count($string, $chars[0]);\r
+ $num_angle_end = substr_count($string, $chars[1]);\r
+\r
+ $this->_hasUnclosedBracketsSub($string, $num_angle_start, $chars[0]);\r
+ $this->_hasUnclosedBracketsSub($string, $num_angle_end, $chars[1]);\r
+\r
+ if ($num_angle_start < $num_angle_end) {\r
+ $this->error = 'Invalid address spec. Unmatched quote or bracket (' . $chars . ')';\r
+ return false;\r
+ } else {\r
+ return ($num_angle_start > $num_angle_end);\r
+ }\r
+ }\r
+\r
+ /**\r
+ * Sub function that is used only by hasUnclosedBrackets().\r
+ *\r
+ * @access private\r
+ * @param string $string The string to check.\r
+ * @param integer &$num The number of occurences.\r
+ * @param string $char The character to count.\r
+ * @return integer The number of occurences of $char in $string, adjusted for backslashes.\r
+ */\r
+ function _hasUnclosedBracketsSub($string, &$num, $char)\r
+ {\r
+ $parts = explode($char, $string);\r
+ for ($i = 0; $i < count($parts); $i++){\r
+ if (substr($parts[$i], -1) == '\\' || $this->_hasUnclosedQuotes($parts[$i]))\r
+ $num--;\r
+ if (isset($parts[$i + 1]))\r
+ $parts[$i + 1] = $parts[$i] . $char . $parts[$i + 1];\r
+ }\r
+\r
+ return $num;\r
+ }\r
+\r
+ /**\r
+ * Function to begin checking the address.\r
+ *\r
+ * @access private\r
+ * @param string $address The address to validate.\r
+ * @return mixed False on failure, or a structured array of address information on success.\r
+ */\r
+ function _validateAddress($address)\r
+ {\r
+ $is_group = false;\r
+ $addresses = array();\r
+\r
+ if ($address['group']) {\r
+ $is_group = true;\r
+\r
+ // Get the group part of the name\r
+ $parts = explode(':', $address['address']);\r
+ $groupname = $this->_splitCheck($parts, ':');\r
+ $structure = array();\r
+\r
+ // And validate the group part of the name.\r
+ if (!$this->_validatePhrase($groupname)){\r
+ $this->error = 'Group name did not validate.';\r
+ return false;\r
+ } else {\r
+ // Don't include groups if we are not nesting\r
+ // them. This avoids returning invalid addresses.\r
+ if ($this->nestGroups) {\r
+ $structure = new stdClass;\r
+ $structure->groupname = $groupname;\r
+ }\r
+ }\r
+\r
+ $address['address'] = ltrim(substr($address['address'], strlen($groupname . ':')));\r
+ }\r
+\r
+ // If a group then split on comma and put into an array.\r
+ // Otherwise, Just put the whole address in an array.\r
+ if ($is_group) {\r
+ while (strlen($address['address']) > 0) {\r
+ $parts = explode(',', $address['address']);\r
+ $addresses[] = $this->_splitCheck($parts, ',');\r
+ $address['address'] = trim(substr($address['address'], strlen(end($addresses) . ',')));\r
+ }\r
+ } else {\r
+ $addresses[] = $address['address'];\r
+ }\r
+\r
+ // Check that $addresses is set, if address like this:\r
+ // Groupname:;\r
+ // Then errors were appearing.\r
+ if (!count($addresses)){\r
+ $this->error = 'Empty group.';\r
+ return false;\r
+ }\r
+\r
+ // Trim the whitespace from all of the address strings.\r
+ array_map('trim', $addresses);\r
+\r
+ // Validate each mailbox.\r
+ // Format could be one of: name <geezer@domain.com>\r
+ // geezer@domain.com\r
+ // geezer\r
+ // ... or any other format valid by RFC 822.\r
+ for ($i = 0; $i < count($addresses); $i++) {\r
+ if (!$this->validateMailbox($addresses[$i])) {\r
+ if (empty($this->error)) {\r
+ $this->error = 'Validation failed for: ' . $addresses[$i];\r
+ }\r
+ return false;\r
+ }\r
+ }\r
+\r
+ // Nested format\r
+ if ($this->nestGroups) {\r
+ if ($is_group) {\r
+ $structure->addresses = $addresses;\r
+ } else {\r
+ $structure = $addresses[0];\r
+ }\r
+\r
+ // Flat format\r
+ } else {\r
+ if ($is_group) {\r
+ $structure = array_merge($structure, $addresses);\r
+ } else {\r
+ $structure = $addresses;\r
+ }\r
+ }\r
+\r
+ return $structure;\r
+ }\r
+\r
+ /**\r
+ * Function to validate a phrase.\r
+ *\r
+ * @access private\r
+ * @param string $phrase The phrase to check.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _validatePhrase($phrase)\r
+ {\r
+ // Splits on one or more Tab or space.\r
+ $parts = preg_split('/[ \\x09]+/', $phrase, -1, PREG_SPLIT_NO_EMPTY);\r
+\r
+ $phrase_parts = array();\r
+ while (count($parts) > 0){\r
+ $phrase_parts[] = $this->_splitCheck($parts, ' ');\r
+ for ($i = 0; $i < $this->index + 1; $i++)\r
+ array_shift($parts);\r
+ }\r
+\r
+ foreach ($phrase_parts as $part) {\r
+ // If quoted string:\r
+ if (substr($part, 0, 1) == '"') {\r
+ if (!$this->_validateQuotedString($part)) {\r
+ return false;\r
+ }\r
+ continue;\r
+ }\r
+\r
+ // Otherwise it's an atom:\r
+ if (!$this->_validateAtom($part)) return false;\r
+ }\r
+\r
+ return true;\r
+ }\r
+\r
+ /**\r
+ * Function to validate an atom which from rfc822 is:\r
+ * atom = 1*<any CHAR except specials, SPACE and CTLs>\r
+ *\r
+ * If validation ($this->validate) has been turned off, then\r
+ * validateAtom() doesn't actually check anything. This is so that you\r
+ * can split a list of addresses up before encoding personal names\r
+ * (umlauts, etc.), for example.\r
+ *\r
+ * @access private\r
+ * @param string $atom The string to check.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _validateAtom($atom)\r
+ {\r
+ if (!$this->validate) {\r
+ // Validation has been turned off; assume the atom is okay.\r
+ return true;\r
+ }\r
+\r
+ // Check for any char from ASCII 0 - ASCII 127\r
+ if (!preg_match('/^[\\x00-\\x7E]+$/i', $atom, $matches)) {\r
+ return false;\r
+ }\r
+\r
+ // Check for specials:\r
+ if (preg_match('/[][()<>@,;\\:". ]/', $atom)) {\r
+ return false;\r
+ }\r
+\r
+ // Check for control characters (ASCII 0-31):\r
+ if (preg_match('/[\\x00-\\x1F]+/', $atom)) {\r
+ return false;\r
+ }\r
+\r
+ return true;\r
+ }\r
+\r
+ /**\r
+ * Function to validate quoted string, which is:\r
+ * quoted-string = <"> *(qtext/quoted-pair) <">\r
+ *\r
+ * @access private\r
+ * @param string $qstring The string to check\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _validateQuotedString($qstring)\r
+ {\r
+ // Leading and trailing "\r
+ $qstring = substr($qstring, 1, -1);\r
+\r
+ // Perform check, removing quoted characters first.\r
+ return !preg_match('/[\x0D\\\\"]/', preg_replace('/\\\\./', '', $qstring));\r
+ }\r
+\r
+ /**\r
+ * Function to validate a mailbox, which is:\r
+ * mailbox = addr-spec ; simple address\r
+ * / phrase route-addr ; name and route-addr\r
+ *\r
+ * @access public\r
+ * @param string &$mailbox The string to check.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function validateMailbox(&$mailbox)\r
+ {\r
+ // A couple of defaults.\r
+ $phrase = '';\r
+ $comment = '';\r
+ $comments = array();\r
+\r
+ // Catch any RFC822 comments and store them separately.\r
+ $_mailbox = $mailbox;\r
+ while (strlen(trim($_mailbox)) > 0) {\r
+ $parts = explode('(', $_mailbox);\r
+ $before_comment = $this->_splitCheck($parts, '(');\r
+ if ($before_comment != $_mailbox) {\r
+ // First char should be a (.\r
+ $comment = substr(str_replace($before_comment, '', $_mailbox), 1);\r
+ $parts = explode(')', $comment);\r
+ $comment = $this->_splitCheck($parts, ')');\r
+ $comments[] = $comment;\r
+\r
+ // +1 is for the trailing )\r
+ $_mailbox = substr($_mailbox, strpos($_mailbox, $comment)+strlen($comment)+1);\r
+ } else {\r
+ break;\r
+ }\r
+ }\r
+\r
+ foreach ($comments as $comment) {\r
+ $mailbox = str_replace("($comment)", '', $mailbox);\r
+ }\r
+\r
+ $mailbox = trim($mailbox);\r
+\r
+ // Check for name + route-addr\r
+ if (substr($mailbox, -1) == '>' && substr($mailbox, 0, 1) != '<') {\r
+ $parts = explode('<', $mailbox);\r
+ $name = $this->_splitCheck($parts, '<');\r
+\r
+ $phrase = trim($name);\r
+ $route_addr = trim(substr($mailbox, strlen($name.'<'), -1));\r
+\r
+ if ($this->_validatePhrase($phrase) === false || ($route_addr = $this->_validateRouteAddr($route_addr)) === false) {\r
+ return false;\r
+ }\r
+\r
+ // Only got addr-spec\r
+ } else {\r
+ // First snip angle brackets if present.\r
+ if (substr($mailbox, 0, 1) == '<' && substr($mailbox, -1) == '>') {\r
+ $addr_spec = substr($mailbox, 1, -1);\r
+ } else {\r
+ $addr_spec = $mailbox;\r
+ }\r
+\r
+ if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {\r
+ return false;\r
+ }\r
+ }\r
+\r
+ // Construct the object that will be returned.\r
+ $mbox = new stdClass();\r
+\r
+ // Add the phrase (even if empty) and comments\r
+ $mbox->personal = $phrase;\r
+ $mbox->comment = isset($comments) ? $comments : array();\r
+\r
+ if (isset($route_addr)) {\r
+ $mbox->mailbox = $route_addr['local_part'];\r
+ $mbox->host = $route_addr['domain'];\r
+ $route_addr['adl'] !== '' ? $mbox->adl = $route_addr['adl'] : '';\r
+ } else {\r
+ $mbox->mailbox = $addr_spec['local_part'];\r
+ $mbox->host = $addr_spec['domain'];\r
+ }\r
+\r
+ $mailbox = $mbox;\r
+ return true;\r
+ }\r
+\r
+ /**\r
+ * This function validates a route-addr which is:\r
+ * route-addr = "<" [route] addr-spec ">"\r
+ *\r
+ * Angle brackets have already been removed at the point of\r
+ * getting to this function.\r
+ *\r
+ * @access private\r
+ * @param string $route_addr The string to check.\r
+ * @return mixed False on failure, or an array containing validated address/route information on success.\r
+ */\r
+ function _validateRouteAddr($route_addr)\r
+ {\r
+ // Check for colon.\r
+ if (strpos($route_addr, ':') !== false) {\r
+ $parts = explode(':', $route_addr);\r
+ $route = $this->_splitCheck($parts, ':');\r
+ } else {\r
+ $route = $route_addr;\r
+ }\r
+\r
+ // If $route is same as $route_addr then the colon was in\r
+ // quotes or brackets or, of course, non existent.\r
+ if ($route === $route_addr){\r
+ unset($route);\r
+ $addr_spec = $route_addr;\r
+ if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {\r
+ return false;\r
+ }\r
+ } else {\r
+ // Validate route part.\r
+ if (($route = $this->_validateRoute($route)) === false) {\r
+ return false;\r
+ }\r
+\r
+ $addr_spec = substr($route_addr, strlen($route . ':'));\r
+\r
+ // Validate addr-spec part.\r
+ if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {\r
+ return false;\r
+ }\r
+ }\r
+\r
+ if (isset($route)) {\r
+ $return['adl'] = $route;\r
+ } else {\r
+ $return['adl'] = '';\r
+ }\r
+\r
+ $return = array_merge($return, $addr_spec);\r
+ return $return;\r
+ }\r
+\r
+ /**\r
+ * Function to validate a route, which is:\r
+ * route = 1#("@" domain) ":"\r
+ *\r
+ * @access private\r
+ * @param string $route The string to check.\r
+ * @return mixed False on failure, or the validated $route on success.\r
+ */\r
+ function _validateRoute($route)\r
+ {\r
+ // Split on comma.\r
+ $domains = explode(',', trim($route));\r
+\r
+ foreach ($domains as $domain) {\r
+ $domain = str_replace('@', '', trim($domain));\r
+ if (!$this->_validateDomain($domain)) return false;\r
+ }\r
+\r
+ return $route;\r
+ }\r
+\r
+ /**\r
+ * Function to validate a domain, though this is not quite what\r
+ * you expect of a strict internet domain.\r
+ *\r
+ * domain = sub-domain *("." sub-domain)\r
+ *\r
+ * @access private\r
+ * @param string $domain The string to check.\r
+ * @return mixed False on failure, or the validated domain on success.\r
+ */\r
+ function _validateDomain($domain)\r
+ {\r
+ // Note the different use of $subdomains and $sub_domains\r
+ $subdomains = explode('.', $domain);\r
+\r
+ while (count($subdomains) > 0) {\r
+ $sub_domains[] = $this->_splitCheck($subdomains, '.');\r
+ for ($i = 0; $i < $this->index + 1; $i++)\r
+ array_shift($subdomains);\r
+ }\r
+\r
+ foreach ($sub_domains as $sub_domain) {\r
+ if (!$this->_validateSubdomain(trim($sub_domain)))\r
+ return false;\r
+ }\r
+\r
+ // Managed to get here, so return input.\r
+ return $domain;\r
+ }\r
+\r
+ /**\r
+ * Function to validate a subdomain:\r
+ * subdomain = domain-ref / domain-literal\r
+ *\r
+ * @access private\r
+ * @param string $subdomain The string to check.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _validateSubdomain($subdomain)\r
+ {\r
+ if (preg_match('|^\[(.*)]$|', $subdomain, $arr)){\r
+ if (!$this->_validateDliteral($arr[1])) return false;\r
+ } else {\r
+ if (!$this->_validateAtom($subdomain)) return false;\r
+ }\r
+\r
+ // Got here, so return successful.\r
+ return true;\r
+ }\r
+\r
+ /**\r
+ * Function to validate a domain literal:\r
+ * domain-literal = "[" *(dtext / quoted-pair) "]"\r
+ *\r
+ * @access private\r
+ * @param string $dliteral The string to check.\r
+ * @return boolean Success or failure.\r
+ */\r
+ function _validateDliteral($dliteral)\r
+ {\r
+ return !preg_match('/(.)[][\x0D\\\\]/', $dliteral, $matches) && $matches[1] != '\\';\r
+ }\r
+\r
+ /**\r
+ * Function to validate an addr-spec.\r
+ *\r
+ * addr-spec = local-part "@" domain\r
+ *\r
+ * @access private\r
+ * @param string $addr_spec The string to check.\r
+ * @return mixed False on failure, or the validated addr-spec on success.\r
+ */\r
+ function _validateAddrSpec($addr_spec)\r
+ {\r
+ $addr_spec = trim($addr_spec);\r
+\r
+ // Split on @ sign if there is one.\r
+ if (strpos($addr_spec, '@') !== false) {\r
+ $parts = explode('@', $addr_spec);\r
+ $local_part = $this->_splitCheck($parts, '@');\r
+ $domain = substr($addr_spec, strlen($local_part . '@'));\r
+\r
+ // No @ sign so assume the default domain.\r
+ } else {\r
+ $local_part = $addr_spec;\r
+ $domain = $this->default_domain;\r
+ }\r
+\r
+ if (($local_part = $this->_validateLocalPart($local_part)) === false) return false;\r
+ if (($domain = $this->_validateDomain($domain)) === false) return false;\r
+\r
+ // Got here so return successful.\r
+ return array('local_part' => $local_part, 'domain' => $domain);\r
+ }\r
+\r
+ /**\r
+ * Function to validate the local part of an address:\r
+ * local-part = word *("." word)\r
+ *\r
+ * @access private\r
+ * @param string $local_part\r
+ * @return mixed False on failure, or the validated local part on success.\r
+ */\r
+ function _validateLocalPart($local_part)\r
+ {\r
+ $parts = explode('.', $local_part);\r
+ $words = array();\r
+\r
+ // Split the local_part into words.\r
+ while (count($parts) > 0){\r
+ $words[] = $this->_splitCheck($parts, '.');\r
+ for ($i = 0; $i < $this->index + 1; $i++) {\r
+ array_shift($parts);\r
+ }\r
+ }\r
+\r
+ // Validate each word.\r
+ foreach ($words as $word) {\r
+ // If this word contains an unquoted space, it is invalid. (6.2.4)\r
+ if (strpos($word, ' ') && $word[0] !== '"')\r
+ {\r
+ return false;\r
+ }\r
+\r
+ if ($this->_validatePhrase(trim($word)) === false) return false;\r
+ }\r
+\r
+ // Managed to get here, so return the input.\r
+ return $local_part;\r
+ }\r
+\r
+ /**\r
+ * Returns an approximate count of how many addresses are in the\r
+ * given string. This is APPROXIMATE as it only splits based on a\r
+ * comma which has no preceding backslash. Could be useful as\r
+ * large amounts of addresses will end up producing *large*\r
+ * structures when used with parseAddressList().\r
+ *\r
+ * @param string $data Addresses to count\r
+ * @return int Approximate count\r
+ */\r
+ function approximateCount($data)\r
+ {\r
+ return count(preg_split('/(?<!\\\\),/', $data));\r
+ }\r
+\r
+ /**\r
+ * This is a email validating function separate to the rest of the\r
+ * class. It simply validates whether an email is of the common\r
+ * internet form: <user>@<domain>. This can be sufficient for most\r
+ * people. Optional stricter mode can be utilised which restricts\r
+ * mailbox characters allowed to alphanumeric, full stop, hyphen\r
+ * and underscore.\r
+ *\r
+ * @param string $data Address to check\r
+ * @param boolean $strict Optional stricter mode\r
+ * @return mixed False if it fails, an indexed array\r
+ * username/domain if it matches\r
+ */\r
+ function isValidInetAddress($data, $strict = false)\r
+ {\r
+ $regex = $strict ? '/^([.0-9a-z_+-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,4})$/i' : '/^([*+!.&#$|\'\\%\/0-9a-z^_`{}=?~:-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,4})$/i';\r
+ if (preg_match($regex, trim($data), $matches)) {\r
+ return array($matches[1], $matches[2]);\r
+ } else {\r
+ return false;\r
+ }\r
+ }\r
+\r
+}\r