#include "power.h"
#include "commondef.h"
#include "eeprom.h"
+#include "backlight.h"
+#include "rencoder.h"
-
-void call_freqbank(unsigned char num)
+void call_freqbank(unsigned int num)
{
unsigned char _fm;
unsigned char _band;
unsigned char _userband;
- if(num >= USER_MEMORY_NUM) return;
+ unsigned int bank = num / USER_MEMORY_NUM;
+ unsigned int n = num % USER_MEMORY_NUM;
+
+ if(num >= (USER_MEMORY_NUM * USER_MEMORY_BANKS)) return;
- _fm = setup.memoryfreqs[num].fm;
- _userband = setup.memoryfreqs[num].band;
+ if(bank != setup.pagenum){ // Swap memory
+// save_frequencies();
+ load_frequencies(bank, 0x00);
+ }
+
+ _fm = freqset.memoryfreqs[n].fm;
+ _userband = freqset.memoryfreqs[n].band;
_band = _userband & 0x1f;
_userband = _userband >> 5;
if(_fm) { // AM
setup.amband = _band;
setup.am_userbandnum = _userband;
}
- akc6955_chg_fm(_fm, setup.memoryfreqs[num].freq);
+ setup.memorynum = num;
+ akc6955_chg_fm(_fm, freqset.memoryfreqs[n].freq);
}
-void set_freqbank(unsigned char num)
+void set_freqbank(unsigned int num)
{
unsigned char _fm;
unsigned char _band;
unsigned char _userband;
unsigned int _freq;
+ unsigned int bank = num / USER_MEMORY_NUM;
+ unsigned int n = num % USER_MEMORY_NUM;
+
+ if(num >= (USER_MEMORY_NUM * USER_MEMORY_BANKS)) return;
- if(num >= USER_MEMORY_NUM) return;
+ if(bank != setup.pagenum){ // Save now bank, and load using bank
+ save_frequencies();
+ load_frequencies(bank, 0x00);
+ }
_fm = setup.fm;
_freq = setup.amfreq;
_band = setup.fmband;
_freq = setup.fmfreq;
}
- setup.memoryfreqs[num].fm = _fm;
- setup.memoryfreqs[num].band = (_userband << 5) | (_band & 0x1f);
- setup.memoryfreqs[num].freq = _freq;
+ freqset.memoryfreqs[n].fm = _fm;
+ freqset.memoryfreqs[n].band = (_userband << 5) | (_band & 0x1f);
+ freqset.memoryfreqs[n].freq = _freq;
+
+ save_frequencies();
}
void on_call_userfreq(void)
{
- unsigned int val = USER_MEMORY_NUM;
+ unsigned long val = USER_MEMORY_NUM * USER_MEMORY_BANKS;
_CLS();
- _LOCATE(0,0);
- printstr("Mem: 00-");
- print_numeric_nosupress(USER_MEMORY_NUM - 1, 2);
- val = read_numeric(val, 2, 4, 1);
+// _LOCATE(0,0);
+ printstr("Mem: 000-");
+ print_numeric_nosupress(val - 1, 3);
+ val = read_numeric(val, 3, 4, 1);
+ if(val >= 0x80000000) return;
call_freqbank(val);
}
void on_set_userfreq(void)
{
- unsigned int val = USER_MEMORY_NUM;
+ unsigned long val = USER_MEMORY_NUM * USER_MEMORY_BANKS;
unsigned char n;
unsigned char c;
_CLS();
- _LOCATE(0,0);
- printstr("Set Mem: 00-");
- print_numeric_nosupress(USER_MEMORY_NUM - 1, 2);
- val = read_numeric(val, 2, 4, 1);
+// _LOCATE(0,0);
+ printstr("Set Mem: 000-");
+ print_numeric_nosupress(val - 1, 3);
+ val = read_numeric(val, 3, 4, 1);
+ if(val >= 0x80000000) return;
_HOME();
- _LOCATE(0,0);
- printstr("OK? A=OK ");
- do {
- n = pollkeys(pollkeybuf, 19, 1);
- } while(n == 0);
- c = pollkeybuf[0];
+// _LOCATE(0,0);
+ printstr("OK? A=OK ");
+ c = pollkey_single();
if(c != charcode_a) return;
set_freqbank(val);
- save_eeprom();
+// save_eeprom();
+}
+
+static void disp_updown_lcd(void)
+{
+ // _LOCATE(0,0);
+ printstr("CH:");
+ print_numeric_nosupress(setup.memorynum, 3);
+ printstr(" HELP=F");
+ update_status();
+ print_freq(1);
+ _HOME();
+
+}
+
+static unsigned char renc_updown_userfreq(unsigned char dispf)
+{
+ unsigned int count;
+ count = renc_count;
+
+ if((renc_dir == RENC_NONE) || (count == 0)) return dispf;
+ if(renc_dir == RENC_RIGHT) {
+ setup.memorynum += count;
+ } else if(renc_dir == RENC_LEFT) {
+ setup.memorynum = (setup.memorynum +
+ USER_MEMORY_NUM * USER_MEMORY_BANKS) - count;
+ } else {
+ return dispf;
+ }
+ setup.memorynum = setup.memorynum % (USER_MEMORY_NUM * USER_MEMORY_BANKS);
+ rencoder_start();
+ call_freqbank(setup.memorynum);
+ backlight_reset(charcode_f);
+ dispf = backlight_dec(0x00);
+ disp_updown_lcd();
+ return dispf;
}
void on_updown_userfreq(void)
unsigned char _fm;
unsigned char _band;
unsigned char _userband;
- unsigned char n;
unsigned char c;
-
+ unsigned char dispf = 0xff;
+ unsigned int _ui_idle = setup.ui_idlecount / 23;
+ unsigned char _ui_pad = setup.ui_idlecount % 23;
+ unsigned char changef = 0x00;
+
+ if(_ui_idle == 0) _ui_idle = 1;
_fm = setup.fm;
_freq = setup.amfreq;
_userband = setup.am_userbandnum;
_CLS();
do {
- _LOCATE(0,0);
- printstr("CH:");
- print_numeric_nosupress(setup.memorynum, 2);
- printstr(" 8/2/A");
- update_status();
- print_freq(1);
- _HOME();
- c = pollkey_single_timeout(44, 1); // About 1s
+ dispf = renc_updown_userfreq(dispf);
+ if(dispf != 0) {
+ disp_updown_lcd();
+ }
+ c = pollkey_single_timeout(_ui_idle, 1); // 23*41 = 943ms
+ backlight_reset(c);
+ dispf = backlight_dec(dispf);
+
+
switch(c) {
- case charcode_8: // UP CH
+ case charcode_7: // UP 1CH
setup.memorynum++;
- if(setup.memorynum >= USER_MEMORY_NUM) setup.memorynum = 0;
- call_freqbank(setup.memorynum);
- break;
- case charcode_2: // Down CH
- if(setup.memorynum == 0) setup.memorynum = USER_MEMORY_NUM;
- setup.memorynum--;
- call_freqbank(setup.memorynum);
+ changef = 0xff;
break;
+ case charcode_1: // Down 1CH
+ changef = 0xff;
+ setup.memorynum = setup.memorynum + (USER_MEMORY_NUM * USER_MEMORY_BANKS) - 1;
+ break;
+ case charcode_9: // Up CH FAST
+ changef = 0xff;
+ setup.memorynum += 100;
+ break;
+ case charcode_3: // Down CH FAST
+ changef = 0xff;
+ setup.memorynum = setup.memorynum + (USER_MEMORY_NUM * USER_MEMORY_BANKS) - 100;
+ break;
+ case charcode_8: // Up CH MID
+ changef = 0xff;
+ setup.memorynum += USER_MEMORY_NUM;
+ break;
+ case charcode_2: // Down CH MID
+ changef = 0xff;
+ setup.memorynum = setup.memorynum + (USER_MEMORY_NUM * USER_MEMORY_BANKS) - USER_MEMORY_NUM;
+ break;
+ case charcode_5: // Recall
+ changef = 0xff;
+ break;
case charcode_d: // Reset
- if(_fm) { // AM
+ if(_fm) { // AM
setup.fmband = _band;
setup.fm_userbandnum = _userband;
setup.fmfreq = _freq;
- } else {
+ } else {
setup.amband = _band;
setup.am_userbandnum = _userband;
setup.amfreq = _freq;
- }
- akc6955_chg_fm(_fm, _freq);
- break;
- case charcode_5: // exit
+ }
+ akc6955_chg_fm(_fm, _freq);
+ break;
+ case charcode_4:
+ on_call_userfreq();
+ break;
+ case charcode_6:
+ on_set_userfreq();
+ break;
case charcode_a:
goto _l0;
break;
+ case charcode_f:
+ userfreq_help();
+ _CLS();
+ break;
+ case charcode_e: // Set Light
+ if(dispf == 0x00){
+ dispf = 0xff;
+ } else {
+ dispf = 0x00;
+ }
+ break;
default:
break;
}
-// _HOME();
+
+ setup.memorynum = setup.memorynum % (USER_MEMORY_NUM * USER_MEMORY_BANKS);
+ if(changef != 0) {
+ call_freqbank(setup.memorynum);
+ }
+ if(_ui_pad != 0) idle_time_ms(_ui_pad); // Pad 9ms, 1Loop = 1000ms.
+ changef = 0;
} while(1);
_l0:
_CLS();