OSDN Git Service

Enable to track git://github.com/monaka/binutils.git
[pf3gnuchains/pf3gnuchains3x.git] / winsup / cygwin / include / arpa / telnet.h
diff --git a/winsup/cygwin/include/arpa/telnet.h b/winsup/cygwin/include/arpa/telnet.h
new file mode 100644 (file)
index 0000000..5087476
--- /dev/null
@@ -0,0 +1,322 @@
+/*
+ * Copyright (c) 1983, 1993
+ *     The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *     This product includes software developed by the University of
+ *     California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *     @(#)telnet.h    8.2 (Berkeley) 12/15/93
+ */
+
+#ifndef _ARPA_TELNET_H
+#define _ARPA_TELNET_H
+
+/*
+ * Definitions for the TELNET protocol.
+ */
+#define        IAC     255             /* interpret as command: */
+#define        DONT    254             /* you are not to use option */
+#define        DO      253             /* please, you use option */
+#define        WONT    252             /* I won't use option */
+#define        WILL    251             /* I will use option */
+#define        SB      250             /* interpret as subnegotiation */
+#define        GA      249             /* you may reverse the line */
+#define        EL      248             /* erase the current line */
+#define        EC      247             /* erase the current character */
+#define        AYT     246             /* are you there */
+#define        AO      245             /* abort output--but let prog finish */
+#define        IP      244             /* interrupt process--permanently */
+#define        BREAK   243             /* break */
+#define        DM      242             /* data mark--for connect. cleaning */
+#define        NOP     241             /* nop */
+#define        SE      240             /* end sub negotiation */
+#define EOR     239             /* end of record (transparent mode) */
+#define        ABORT   238             /* Abort process */
+#define        SUSP    237             /* Suspend process */
+#define        xEOF    236             /* End of file: EOF is already used... */
+
+#define SYNCH  242             /* for telfunc calls */
+
+#ifdef TELCMDS
+char *telcmds[] = {
+       "EOF", "SUSP", "ABORT", "EOR",
+       "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
+       "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", 0,
+};
+#else
+extern char *telcmds[];
+#endif
+
+#define        TELCMD_FIRST    xEOF
+#define        TELCMD_LAST     IAC
+#define        TELCMD_OK(x)    ((unsigned int)(x) <= TELCMD_LAST && \
+                        (unsigned int)(x) >= TELCMD_FIRST)
+#define        TELCMD(x)       telcmds[(x)-TELCMD_FIRST]
+
+/* telnet options */
+#define TELOPT_BINARY  0       /* 8-bit data path */
+#define TELOPT_ECHO    1       /* echo */
+#define        TELOPT_RCP      2       /* prepare to reconnect */
+#define        TELOPT_SGA      3       /* suppress go ahead */
+#define        TELOPT_NAMS     4       /* approximate message size */
+#define        TELOPT_STATUS   5       /* give status */
+#define        TELOPT_TM       6       /* timing mark */
+#define        TELOPT_RCTE     7       /* remote controlled transmission and echo */
+#define TELOPT_NAOL    8       /* negotiate about output line width */
+#define TELOPT_NAOP    9       /* negotiate about output page size */
+#define TELOPT_NAOCRD  10      /* negotiate about CR disposition */
+#define TELOPT_NAOHTS  11      /* negotiate about horizontal tabstops */
+#define TELOPT_NAOHTD  12      /* negotiate about horizontal tab disposition */
+#define TELOPT_NAOFFD  13      /* negotiate about formfeed disposition */
+#define TELOPT_NAOVTS  14      /* negotiate about vertical tab stops */
+#define TELOPT_NAOVTD  15      /* negotiate about vertical tab disposition */
+#define TELOPT_NAOLFD  16      /* negotiate about output LF disposition */
+#define TELOPT_XASCII  17      /* extended ascic character set */
+#define        TELOPT_LOGOUT   18      /* force logout */
+#define        TELOPT_BM       19      /* byte macro */
+#define        TELOPT_DET      20      /* data entry terminal */
+#define        TELOPT_SUPDUP   21      /* supdup protocol */
+#define        TELOPT_SUPDUPOUTPUT 22  /* supdup output */
+#define        TELOPT_SNDLOC   23      /* send location */
+#define        TELOPT_TTYPE    24      /* terminal type */
+#define        TELOPT_EOR      25      /* end or record */
+#define        TELOPT_TUID     26      /* TACACS user identification */
+#define        TELOPT_OUTMRK   27      /* output marking */
+#define        TELOPT_TTYLOC   28      /* terminal location number */
+#define        TELOPT_3270REGIME 29    /* 3270 regime */
+#define        TELOPT_X3PAD    30      /* X.3 PAD */
+#define        TELOPT_NAWS     31      /* window size */
+#define        TELOPT_TSPEED   32      /* terminal speed */
+#define        TELOPT_LFLOW    33      /* remote flow control */
+#define TELOPT_LINEMODE        34      /* Linemode option */
+#define TELOPT_XDISPLOC        35      /* X Display Location */
+#define TELOPT_OLD_ENVIRON 36  /* Old - Environment variables */
+#define        TELOPT_AUTHENTICATION 37/* Authenticate */
+#define        TELOPT_ENCRYPT  38      /* Encryption option */
+#define TELOPT_NEW_ENVIRON 39  /* New - Environment variables */
+#define        TELOPT_EXOPL    255     /* extended-options-list */
+#define TELOPT_ENVIRON TELOPT_OLD_ENVIRON
+
+#define        NTELOPTS        (1+TELOPT_NEW_ENVIRON)
+#ifdef TELOPTS
+char *telopts[NTELOPTS+1] = {
+       "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
+       "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",
+       "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS",
+       "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO",
+       "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT",
+       "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD",
+       "TACACS UID", "OUTPUT MARKING", "TTYLOC",
+       "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW",
+       "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION",
+       "ENCRYPT", "NEW-ENVIRON",
+       0,
+};
+#define        TELOPT_FIRST    TELOPT_BINARY
+#define        TELOPT_LAST     TELOPT_NEW_ENVIRON
+#define        TELOPT_OK(x)    ((unsigned int)(x) <= TELOPT_LAST)
+#define        TELOPT(x)       telopts[(x)-TELOPT_FIRST]
+#endif
+
+/* sub-option qualifiers */
+#define        TELQUAL_IS      0       /* option is... */
+#define        TELQUAL_SEND    1       /* send option */
+#define        TELQUAL_INFO    2       /* ENVIRON: informational version of IS */
+#define        TELQUAL_REPLY   2       /* AUTHENTICATION: client version of IS */
+#define        TELQUAL_NAME    3       /* AUTHENTICATION: client version of IS */
+
+#define        LFLOW_OFF               0       /* Disable remote flow control */
+#define        LFLOW_ON                1       /* Enable remote flow control */
+#define        LFLOW_RESTART_ANY       2       /* Restart output on any char */
+#define        LFLOW_RESTART_XON       3       /* Restart output only on XON */
+
+/*
+ * LINEMODE suboptions
+ */
+
+#define        LM_MODE         1
+#define        LM_FORWARDMASK  2
+#define        LM_SLC          3
+
+#define        MODE_EDIT       0x01
+#define        MODE_TRAPSIG    0x02
+#define        MODE_ACK        0x04
+#define MODE_SOFT_TAB  0x08
+#define MODE_LIT_ECHO  0x10
+
+#define        MODE_MASK       0x1f
+
+/* Not part of protocol, but needed to simplify things... */
+#define MODE_FLOW              0x0100
+#define MODE_ECHO              0x0200
+#define MODE_INBIN             0x0400
+#define MODE_OUTBIN            0x0800
+#define MODE_FORCE             0x1000
+
+#define        SLC_SYNCH       1
+#define        SLC_BRK         2
+#define        SLC_IP          3
+#define        SLC_AO          4
+#define        SLC_AYT         5
+#define        SLC_EOR         6
+#define        SLC_ABORT       7
+#define        SLC_EOF         8
+#define        SLC_SUSP        9
+#define        SLC_EC          10
+#define        SLC_EL          11
+#define        SLC_EW          12
+#define        SLC_RP          13
+#define        SLC_LNEXT       14
+#define        SLC_XON         15
+#define        SLC_XOFF        16
+#define        SLC_FORW1       17
+#define        SLC_FORW2       18
+
+#define        NSLC            18
+
+/*
+ * For backwards compatability, we define SLC_NAMES to be the
+ * list of names if SLC_NAMES is not defined.
+ */
+#define        SLC_NAMELIST    "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \
+                       "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \
+                       "LNEXT", "XON", "XOFF", "FORW1", "FORW2", 0,
+#ifdef SLC_NAMES
+char *slc_names[] = {
+       SLC_NAMELIST
+};
+#else
+extern char *slc_names[];
+#define        SLC_NAMES SLC_NAMELIST
+#endif
+
+#define        SLC_NAME_OK(x)  ((unsigned int)(x) <= NSLC)
+#define SLC_NAME(x)    slc_names[x]
+
+#define        SLC_NOSUPPORT   0
+#define        SLC_CANTCHANGE  1
+#define        SLC_VARIABLE    2
+#define        SLC_DEFAULT     3
+#define        SLC_LEVELBITS   0x03
+
+#define        SLC_FUNC        0
+#define        SLC_FLAGS       1
+#define        SLC_VALUE       2
+
+#define        SLC_ACK         0x80
+#define        SLC_FLUSHIN     0x40
+#define        SLC_FLUSHOUT    0x20
+
+#define        OLD_ENV_VAR     1
+#define        OLD_ENV_VALUE   0
+#define        NEW_ENV_VAR     0
+#define        NEW_ENV_VALUE   1
+#define        ENV_ESC         2
+#define        ENV_USERVAR     3
+
+#define ENV_VALUE 0
+#define ENV_VAR 1
+
+/*
+ * AUTHENTICATION suboptions
+ */
+
+/*
+ * Who is authenticating who ...
+ */
+#define        AUTH_WHO_CLIENT         0       /* Client authenticating server */
+#define        AUTH_WHO_SERVER         1       /* Server authenticating client */
+#define        AUTH_WHO_MASK           1
+
+/*
+ * amount of authentication done
+ */
+#define        AUTH_HOW_ONE_WAY        0
+#define        AUTH_HOW_MUTUAL         2
+#define        AUTH_HOW_MASK           2
+
+#define        AUTHTYPE_NULL           0
+#define        AUTHTYPE_KERBEROS_V4    1
+#define        AUTHTYPE_KERBEROS_V5    2
+#define        AUTHTYPE_SPX            3
+#define        AUTHTYPE_MINK           4
+#define        AUTHTYPE_CNT            5
+
+#define        AUTHTYPE_TEST           99
+
+#ifdef AUTH_NAMES
+char *authtype_names[] = {
+       "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", 0,
+};
+#else
+extern char *authtype_names[];
+#endif
+
+#define        AUTHTYPE_NAME_OK(x)     ((unsigned int)(x) < AUTHTYPE_CNT)
+#define        AUTHTYPE_NAME(x)        authtype_names[x]
+
+/*
+ * ENCRYPTion suboptions
+ */
+#define        ENCRYPT_IS              0       /* I pick encryption type ... */
+#define        ENCRYPT_SUPPORT         1       /* I support encryption types ... */
+#define        ENCRYPT_REPLY           2       /* Initial setup response */
+#define        ENCRYPT_START           3       /* Am starting to send encrypted */
+#define        ENCRYPT_END             4       /* Am ending encrypted */
+#define        ENCRYPT_REQSTART        5       /* Request you start encrypting */
+#define        ENCRYPT_REQEND          6       /* Request you send encrypting */
+#define        ENCRYPT_ENC_KEYID       7
+#define        ENCRYPT_DEC_KEYID       8
+#define        ENCRYPT_CNT             9
+
+#define        ENCTYPE_ANY             0
+#define        ENCTYPE_DES_CFB64       1
+#define        ENCTYPE_DES_OFB64       2
+#define        ENCTYPE_CNT             3
+
+#ifdef ENCRYPT_NAMES
+char *encrypt_names[] = {
+       "IS", "SUPPORT", "REPLY", "START", "END",
+       "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID",
+       0,
+};
+char *enctype_names[] = {
+       "ANY", "DES_CFB64",  "DES_OFB64",  0,
+};
+#else
+extern char *encrypt_names[];
+extern char *enctype_names[];
+#endif
+
+
+#define        ENCRYPT_NAME_OK(x)      ((unsigned int)(x) < ENCRYPT_CNT)
+#define        ENCRYPT_NAME(x)         encrypt_names[x]
+
+#define        ENCTYPE_NAME_OK(x)      ((unsigned int)(x) < ENCTYPE_CNT)
+#define        ENCTYPE_NAME(x)         enctype_names[x]
+#endif /* _ARPA_TELNET_H */