hw/net/can: Introduce Xilinx ZynqMP CAN controller

The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.

Example for using single CAN:
    -object can-bus,id=canbus0 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0

Example for connecting both CAN to same virtual CAN on host machine:
    -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -machine xlnx-zcu102.canbus1=canbus1 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
    -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1

To create virtual CAN on the host machine, please check the QEMU CAN docs:
https://github.com/qemu/qemu/blob/master/docs/can.txt

Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/smmuv3: Fix up L1STD_SPAN decoding

Accroding to the SMMUv3 spec, the SPAN field of Level1 Stream Table
Descriptor is 5 bits([4:0]).

Fixes: 9bde7f0674f(hw/arm/smmuv3: Implement translate callback)
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-id: 20201124023711.1184-1-jiangkunkun@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: fixes, cleanups

Lots of fixes, cleanups.
CPU hot-unplug improvements.
A new AER property for virtio devices, adding a dummy AER capability.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 09 Dec 2020 18:04:28 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (65 commits)
  hw/virtio-pci Added AER capability.
  hw/virtio-pci Added counter for pcie capabilities offsets.
  pcie_aer: Fix help message of pcie_aer_inject_error command
  x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature
  x86: ich9: factor out "guest_cpu_hotplug_features"
  tests/acpi: update expected files
  x86: acpi: let the firmware handle pending "CPU remove" events in SMM
  tests/acpi: allow expected files change
  x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug
  acpi: cpuhp: introduce 'firmware performs eject' status/control bits
  hw/i386/pc: add max combined fw size as machine configuration option
  block/export: avoid g_return_val_if() input validation
  contrib/vhost-user-input: avoid g_return_val_if() input validation
  contrib/vhost-user-gpu: avoid g_return_val_if() input validation
  contrib/vhost-user-blk: avoid g_return_val_if() input validation
  .gitlab-ci: add build-libvhost-user
  libvhost-user: add a simple link test without glib
  libvhost-user: make it a meson subproject
  libvhost-user: drop qemu/osdep.h dependency
  libvhost-user: remove qemu/compiler.h usage
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/virtio-pci Added AER capability.

Added AER capability for virtio-pci devices.
Also added property for devices, by default AER is disabled.

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20201203110713.204938-3-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/virtio-pci Added counter for pcie capabilities offsets.

Removed hardcoded offset for ats. Added cap offset counter
for future capabilities like AER.

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20201203110713.204938-2-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pcie_aer: Fix help message of pcie_aer_inject_error command

There is an interesting typo in the help message of pcie_aer_inject_error
command. Use 'tlp' instead of 'tlb' to match the PCIe AER term.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204030953.837-1-yuzenghui@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature

Keep CPU hotunplug with SMI disabled on 5.2 and older and enable
it by default on newer machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: ich9: factor out "guest_cpu_hotplug_features"

it will be reused by next patch to check validity of unplug
feature.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: update expected files

update expected files with following change:

@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
                 CINS,   1,
                 CRMV,   1,
                 CEJ0,   1,
+                CEJF,   1,
                 Offset (0x05),
                 CCMD,   8
             }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: acpi: let the firmware handle pending "CPU remove" events in SMM

if firmware and QEMU negotiated CPU hotunplug support, generate
_EJ0 method so that it will mark CPU for removal by firmware and
pass control to it by triggering SMI.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: allow expected files change

Change that will be introduced by following patch:

@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
                 CINS,   1,
                 CRMV,   1,
                 CEJ0,   1,
+                CEJF,   1,
                 Offset (0x05),
                 CCMD,   8
             }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: cpuhp: introduce 'firmware performs eject' status/control bits

Adds bit #4 to status/control field of CPU hotplug MMIO interface.
New bit will be used OSPM to mark CPUs as pending for removal by firmware,
when it calls _EJ0 method on CPU device node. Later on, when firmware
sees this bit set, it will perform CPU eject which will clear bit #4
as well.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/i386/pc: add max combined fw size as machine configuration option

At Hewlett Packard Inc. we have a need for increased fw size to enable testing of our custom fw.

Rebase v6 patch to d73c46e4

Signed-off-by: Erich McMillan <erich.mcmillan@hp.com>
Message-Id: <20201208155338.14-1-erich.mcmillan@hp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

block/export: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-input: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-gpu: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-blk: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

.gitlab-ci: add build-libvhost-user

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: add a simple link test without glib

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-8-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-12-09' into staging

* Gitlab-CI improvement patches by Philippe
* Some small fixes for tests
* Fix coverity warning in the mcf5206 code

# gpg: Signature made Wed 09 Dec 2020 07:13:12 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-12-09:
  hw/m68k/mcf5206: Don't leak IRQs in mcf5206_mbar_realize()
  gitlab-ci: Move coroutine tests across to gitlab
  gitlab-ci: Move user-static test across to gitlab
  gitlab-ci: Update 'build-disabled' to cover all configurable options
  gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabled
  fuzz: avoid double-fetches by default
  tests/qtest/fuzz-test: Quit test_lp1878642 once done
  test-qga: fix a resource leak in test_qga_guest_get_osinfo()
  gitlab-ci: Add Xen cross-build jobs
  gitlab-ci: Add KVM s390x cross-build jobs
  gitlab-ci: Introduce 'cross_accel_build_job' template
  gitlab-ci: Replace YAML anchors by extends (cross_system_build_job)
  gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 job

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/m68k/mcf5206: Don't leak IRQs in mcf5206_mbar_realize()

Coverity points out that the realize function for the TYPE_MCF5206_MBAR
device leaks the IRQ array it allocates with qemu_allocate_irqs().
Keep a pointer to it in the device state struct to avoid the leak.
(Since it needs to stay around for the life of the simulation there
is no need to actually free it, and the leak was harmless.)

Fixes: Coverity CID 1432412
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120172314.14725-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Move coroutine tests across to gitlab

Similarly to commit 8cdb2cef3f1, move the coroutine tests to GitLab.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-13-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced Travis by Gitlab-CI in comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Move user-static test across to gitlab

Similarly to commit 8cdb2cef3f1, move the user-static test to GitLab.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-11-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Update 'build-disabled' to cover all configurable options

Add these missing options to the 'build-disabled' job:
  --disable-auth-pam             (commit 8953caf3cd38)
  --disable-gcrypt               (commit 91bfcdb01d48)
  --disable-keyring              (commit 54e7aac05624)
  --disable-libudev              (commit 5c53015a480b)
  --disable-opengl               (commit da076ffed6b9)
  --disable-sparse               (commit 03b4fe7de226)

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Dropped the unnecessary hunk with --disable-vhost-user-blk-server]
Message-Id: <20201108204535.2319870-7-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabled

We will keep adding/removing options to our 'configure' script,
so for easier maintainability it makes sense to have CONFIGURE_ARGS
declared as one option per line. This way we can review diff easily
(or rebase/cherry-pick).

No logical change.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-6-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

fuzz: avoid double-fetches by default

The generic fuzzer can find double-fetch bugs. However:
* We currently have no good way of producing qemu-system reproducers for
  double-fetch bugs. Even if we can get developers to run the binary-blob
  reproducers with the qemu-fuzz builds, we currently don't have a minimizer for
  these reproducers, so they are usually not easy to follow.
* Often times the fuzzer will provide a reproducer containing a
  double-fetch for a bug that can be reproduced without double-fetching.

Until we find a way to build nice double-fetch reproducers that
developers are willing to look at, lets tell OSS-Fuzz to avoid
double-fetches.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201202164214.93867-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/qtest/fuzz-test: Quit test_lp1878642 once done

Missed in fd250172842 ("qtest: add a reproducer for LP#1878642").

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201201191026.4149955-2-philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

test-qga: fix a resource leak in test_qga_guest_get_osinfo()

The fixture->fd is created in fixture_setup() and, likewise, needs to be closed
in fixture_tear_down().

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125102403.57709-1-alex.chen@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Add Xen cross-build jobs

Cross-build ARM and X86 targets with only Xen accelerator enabled.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-6-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Add KVM s390x cross-build jobs

Cross-build s390x target with only KVM accelerator enabled.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-5-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Introduce 'cross_accel_build_job' template

Introduce a job template to cross-build accelerator specific
jobs (enable a specific accelerator, disabling the others).

The specific accelerator is selected by the $ACCEL environment
variable (default to KVM).

Extra options such disabling other accelerators are passed
via the $ACCEL_CONFIGURE_OPTS environment variable.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Replace YAML anchors by extends (cross_system_build_job)

'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends

More importantly it allows exploding YAML jobs.

Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-3-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 job

Document what this job cover (build X86 targets with
KVM being the single accelerator available).

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Open 6.0 development tree

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

libvhost-user: make it a meson subproject

By making libvhost-user a subproject, check it builds
standalone (without the global QEMU cflags etc).

Note that the library still relies on QEMU include/qemu/atomic.h and
linux_headers/.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: drop qemu/osdep.h dependency

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-5-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: remove qemu/compiler.h usage

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: replace qemu/memfd.h usage

Undo the damage from commit 5f9ff1eff3 ("libvhost-user: Support tracking
inflight I/O in shared memory") which introduced glib dependency through
osdep.h inclusion.

libvhost-user.c tries to stay free from glib usage.

Use glibc memfd_create directly when available (assumed so when
MFD_ALLOW_SEALING is defined). A following commit will make the project
standalone and check for memfd API at configure time, instead of a
panic at runtime.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201125100640.366523-3-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: replace qemu/bswap.h with glibc endian.h

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201125100640.366523-2-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw: add compat machines for 6.0

Add 6.0 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201109173928.1001764-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove primary_dev member

Only three uses remained, and we can remove them on that case.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-28-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: simplify failover_unplug_primary

We can calculate device just once.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-27-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Caller of this two functions already have primary_dev

Pass it as an argument.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-26-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: We don't need to cache primary_device_id anymore

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-25-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: split failover_find_primary_device_id()

So we can calculate the device id when we need it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-24-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: remove failover_find_primary_device() error parameter

It can never give one error.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-23-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: make sure that id always exist

We check that it exist at device creation time, so we don't have to
check anywhere else.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-22-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: simplify qdev_device_add()

We don't need to walk the opts by hand.  qmp_opt_get() already does
that.  And then we can remove the functions that did that walk.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-21-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: simplify qdev_device_add() failover case

Just put allthe logic inside the same if.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-20-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Rename to failover_find_primary_device()

This commit:
* Rename them to failover_find_primary_devices() so
  - it starts with failover_
  - it don't connect anything, just find the primary device
* Create documentation for the function

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-19-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: virtio_net_connect_failover_devices() does nothing

It just calls virtio_net_find_primary(), so just update the callers.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-18-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Rename function to hide_device()

You should not use pasive.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-17-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: should_be_hidden() should take a bool

We didn't use at all the -1 value, and we don't really care.  It was
only used for the cases when this is not the device that we are
searching for.  And in that case we should not hide the device.

Once there, simplify virtio-Snet_primary_should_be_hidden.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-16-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: simplify virtio_net_find_primary()

a - is_my_primary() never sets one error
b - If we return 1, primary_device_id is always set

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-15-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove memory leak

Two things, at this point:

* n->primary_device_id has to be set, otherwise
  virtio_net_find_primary don't work.  So we have a leak here.

* it has to be exactly the same that prim_dev->id because what
  qdev_find_recursive() does is just compare this two values.

So remove the unneeded assignment and leaky bits.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-14-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove primary_device_dict

It was only used once.  And we have there opts->id, so no need for it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-13-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: remove standby_id variable

We can calculate it, and we only use it once anyways.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-12-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove primary_device_opts

It was really only used once, in failover_add_primary().  Just search
for it on global opts when it is needed.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-11-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: g_strcmp0() knows how to handle NULL

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-10-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Rename bool to failover_primary_hidden

You should not use passive naming variables.
And once there, be able to search for them.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-9-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: qdev_device_add() returns err or dev set

Never both.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-8-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove external partially_hotplugged property

It was only set "once", and with the wrong value. As far as I can see,
libvirt still don't use it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-7-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Remove unused parameter

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-6-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: primary bus is only used once, and where it is set

Just remove the struct member.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-5-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: Use always atomics for primary_should_be_hidden

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-4-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

failover: fix indentantion

Once there, remove not needed cast.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20201118083748.1328-3-quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

unit-test: Add the binary file and clear diff.h

Add the binary file DSDT.pxb and clear bios-tables-test-allowed-diff.h

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-10-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

unit-test: Add testcase for pxb

Add testcase for pxb to make sure the ACPI table is correct for guest.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-9-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

unit-test: The files changed.

The unit-test is seperated into three patches:
1. The files changed and list in bios-tables-test-allowed-diff.h
2. The unit-test
3. The binary file and clear bios-tables-test-allowed-diff.h

The ASL diff would also be listed.
Sice there are 1000+lines diff, some changes would be omitted.

  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x000014BB (5307)
+ *     Length           0x00001E7A (7802)
  *     Revision         0x02
- *     Checksum         0xD1
+ *     Checksum         0x57
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)

+        Device (PC80)
+        {
+            Name (_HID, "PNP0A08" /* PCI Express Bus */)  // _HID: Hardware ID
+            Name (_CID, "PNP0A03" /* PCI Bus */)  // _CID: Compatible ID
+            Name (_ADR, Zero)  // _ADR: Address
+            Name (_CCA, One)  // _CCA: Cache Coherency Attribute
+            Name (_SEG, Zero)  // _SEG: PCI Segment
+            Name (_BBN, 0x80)  // _BBN: BIOS Bus Number
+            Name (_UID, 0x80)  // _UID: Unique ID
+            Name (_STR, Unicode ("pxb Device"))  // _STR: Description String
+            Name (_PRT, Package (0x80)  // _PRT: PCI Routing Table
+            {
+                Package (0x04)
+                {
+                    0xFFFF,
+                    Zero,
+                    GSI0,
+                    Zero
+                },
+

Packages are omitted.

+                Package (0x04)
+                {
+                    0x001FFFFF,
+                    0x03,
+                    GSI2,
+                    Zero
+                }
+            })
+            Device (GSI0)
+            {
+                Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)  // _HID: Hardware ID
+                Name (_UID, Zero)  // _UID: Unique ID
+                Name (_PRS, ResourceTemplate ()  // _PRS: Possible Resource Settings
+                {
+                    Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+                    {
+                        0x00000023,
+                    }
+                })
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+                    {
+                        0x00000023,
+                    }
+                })
+                Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+                {
+                }
+            }

GSI1,2,3 are omitted.

+            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            {
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+                    0x0000,             // Granularity
+                    0x0080,             // Range Minimum
+                    0x0080,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0001,             // Length
+                    ,, )
+            })
+            Name (SUPP, Zero)
+            Name (CTRL, Zero)
+            Method (_OSC, 4, NotSerialized)  // _OSC: Operating System Capabilities
+            {
+                CreateDWordField (Arg3, Zero, CDW1)
+                If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */))
+                {
+                    CreateDWordField (Arg3, 0x04, CDW2)
+                    CreateDWordField (Arg3, 0x08, CDW3)
+                    SUPP = CDW2 /* \_SB_.PC80._OSC.CDW2 */
+                    CTRL = CDW3 /* \_SB_.PC80._OSC.CDW3 */
+                    CTRL &= 0x1F
+                    If ((Arg1 != One))
+                    {
+                        CDW1 |= 0x08
+                    }
+
+                    If ((CDW3 != CTRL))
+                    {
+                        CDW1 |= 0x10
+                    }
+
+                    CDW3 = CTRL /* \_SB_.PC80.CTRL */
+                    Return (Arg3)
+                }
+                Else
+                {
+                    CDW1 |= 0x04
+                    Return (Arg3)
+                }
+            }

DSM is are omitted

         Device (PCI0)
         {
             Name (_HID, "PNP0A08" /* PCI Express Bus */)  // _HID: Hardware ID
                     WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
                         0x0000,             // Granularity
                         0x0000,             // Range Minimum
-                        0x00FF,             // Range Maximum
+                        0x007F,             // Range Maximum
                         0x0000,             // Translation Offset
-                        0x0100,             // Length
+                        0x0080,             // Length

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-8-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Align the size to 128k

If table size is changed between virt_acpi_build and
virt_acpi_build_update, the table size would not be updated to
UEFI, therefore, just align the size to 128kb, which is enough
and same with x86. It would warn if 64k is not enough and the
align size should be updated.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-7-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi/gpex: Build tables for pxb

The resources of pxbs are obtained by crs_build and the resources
used by pxbs would be moved from the resources defined for host-bridge.

The resources for pxb are composed of following two parts:
1. The bar space of the pci-bridge/pcie-root-port behined it
2. The config space of devices behind it.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-6-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Extract crs build form acpi_build.c

Extract crs build form acpi_build.c, the function could also be used
to build the crs for pxbs for arm. The resources are composed by two parts:
1. The bar space of pci-bridge/pcie-root-ports
2. The resources needed by devices behind PXBs.
The base and limit of memory/io are obtained from the config via two APIs:
pci_bridge_get_base and pci_bridge_get_limit

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/arm/virt: Write extra pci roots into fw_cfg

Add bus property to virt machine for primary PCI root bus and use it to add
extra pci roots behind it.

Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20201119014841.7298-4-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

fw_cfg: Refactor extra pci roots addition

Extract extra pci roots addition from pc machine, which could be used by
other machines.

In order to make uefi get the extra roots, it is necessary to write extra
roots into fw_cfg. And only if the uefi knows there are extra roots,
the config spaces of devices behind the root could be obtained.

Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20201119014841.7298-3-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi/gpex: Extract two APIs from acpi_dsdt_add_pci

Extract two APIs acpi_dsdt_add_pci_route_table and
acpi_dsdt_add_pci_osc from acpi_dsdt_add_pci. The first
API is used to specify the pci route table and the second
API is used to declare the operation system capabilities.
These two APIs would be used to specify the pxb-pcie in DSDT.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-2-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: reset device on bad guest index in virtio_load()

If we find a queue with an inconsistent guest index value, explicitly mark the
device as needing a reset - and broken - via virtio_error().

There's at least one driver implementation - the virtio-win NetKVM driver - that
is able to handle a VIRTIO_CONFIG_S_NEEDS_RESET notification and successfully
restore the device to a working state. Other implementations do not correctly
handle this, but as the VQ is not in a functional state anyway, this is still
worth doing.

Signed-off-by: John Levon <john.levon@nutanix.com>
Message-Id: <20201120185103.GA442386@sent>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

memory: Skip bad range assertion if notifier is DEVIOTLB_UNMAP type

Device IOTLB invalidations can unmap arbitrary ranges, eiter outside of
the memory region or even [0, ~0ULL] for all the space. The assertion
could be hit by a guest, and rhel7 guest effectively hit it.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

intel_iommu: Skip page walking on device iotlb invalidations

Although they didn't reach the notifier because of the filtering in
memory_region_notify_iommu_one, the vt-d was still splitting huge
memory invalidations in chunks. Skipping it.

This improves performance in case of netperf with vhost-net:
* TCP_STREAM: From 1923.6Mbit/s to 2175.13Mbit/s (13%)
* TCP_RR: From 8464.73 trans/s to 8932.703333 trans/s (5.5%)
* UDP_RR: From 8562.08 trans/s to 9005.62/s (5.1%)
* UDP_STREAM: No change observed (insignificant 0.1% improvement)

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

memory: Add IOMMU_NOTIFIER_DEVIOTLB_UNMAP IOMMUTLBNotificationType

This allows us to differentiate between regular IOMMU map/unmap events
and DEVIOTLB unmap. Doing so, notifiers that only need device IOTLB
invalidations will not receive regular IOMMU unmappings.

Adapt intel and vhost to use it.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

memory: Add IOMMUTLBEvent

This way we can tell between regular IOMMUTLBEntry (entry of IOMMU
hardware) and notifications.

In the notifications, we set explicitly if it is a MAPs or an UNMAP,
instead of trusting in entry permissions to differentiate them.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>

memory: Rename memory_region_notify_one to memory_region_notify_iommu_one

Previous name didn't reflect the iommu operation.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-user-scsi: Fix memleaks in vus_proc_req()

The 'elem' is allocated memory in vu_queue_pop(), and its memory should be
freed in all error branches after vu_queue_pop().
In addition, in order to free the 'elem' memory outside of while(1) loop, move
the definition of 'elem' to the beginning of vus_proc_req().

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20201125013055.34147-1-alex.chen@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Update version for v5.2.0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Update version for v5.2.0-rc4 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ide: atapi: assert that the buffer pointer is in range

A case was reported where s->io_buffer_index can be out of range.
The report skimped on the details but it seems to be triggered
by s->lba == -1 on the READ/READ CD paths (e.g. by sending an
ATAPI command with LBA = 0xFFFFFFFF).  For now paper over it
with assertions.  The first one ensures that there is no overflow
when incrementing s->io_buffer_index, the second checks for the
buffer overrun.

Note that the buffer overrun is only a read, so I am not sure
if the assertion failure is actually less harmful than the overrun.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201201120926.56559-1-pbonzini@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net/dp8393x: fix integer underflow in dp8393x_do_transmit_packets()

An integer underflow could occur during packet transmission due to 'tx_len' not
being updated if SONIC_TFC register is set to zero. Check for negative 'tx_len'
when removing existing FCS.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1899722
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 20201124092445.658647-1-mcascell@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/elmarco/tags/libslirp-pull-request' into staging

# gpg: Signature made Fri 27 Nov 2020 17:06:28 GMT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/libslirp-pull-request:
  slirp: update to fix CVE-2020-29129 CVE-2020-29130

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

slirp: update to fix CVE-2020-29129 CVE-2020-29130

An out-of-bounds access issue was found in the SLIRP user networking
implementation of QEMU. It could occur while processing ARP/NCSI
packets, if the packet length was shorter than required to accommodate
respective protocol headers and payload. A privileged guest user may use
this flaw to potentially leak host information bytes.

Marc-André Lureau (1):
      Merge branch 'stable-4.2' into 'stable-4.2'

Prasad J Pandit (1):
      slirp: check pkt_len before reading protocol header

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/fixes-20201127-pull-request' into staging

qxl: fix segfault

# gpg: Signature made Fri 27 Nov 2020 07:06:51 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/fixes-20201127-pull-request:
  qxl: fix segfault

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Remove obsolete setuptools dependency and fix Stefan's
Win32 builds.

# gpg: Signature made Thu 26 Nov 2020 14:21:28 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  nsis: Fix build for 64 bit installer
  tests/docker, tests/vm: remove setuptools from images
  configure: remove python pkg_resources check
  meson: use dependency() to find libjpeg

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

nsis: Fix build for 64 bit installer

Pass cpu instead of cpu_family to the NSIS installer script.

That script checks for "x86_64" which is the cpu value,
while cpu_family is "x86".

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125191833.964753-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tests/docker, tests/vm: remove setuptools from images

Setuptools is not needed anymore by the bundled copy of meson,
remove it.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: remove python pkg_resources check

Since meson.git#0240d760c7699a059cc89e584363c6431cdd2b61 setuptools is not required anymore.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201124211925.4194-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qxl: fix segfault

Add missing sanity check.
Reproducer: run qemu with "-device qxl" but without "-spice ..."

Fixes: 0d9b90ce5c73 ("console: make QMP/HMP screendump run in coroutine")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201124122936.30588-1-kraxel@redhat.com

Update version for v5.2.0-rc3 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-for-5.2-pull-request' into staging

PCI host devaddr property fix for 5.2

# gpg: Signature made Tue 24 Nov 2020 15:13:52 GMT
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-for-5.2-pull-request:
  Revert "hw/core/qdev-properties: Use qemu_strtoul() in set_pci_host_devaddr()"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Patches for 5.2.0-rc3:

- qcow2: Fix corruption on write_zeroes with MAY_UNMAP

# gpg: Signature made Tue 24 Nov 2020 14:23:36 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qcow2: Fix corruption on write_zeroes with MAY_UNMAP

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/gkurz-gitlab/tags/9p-fix-2020-11-24' into staging

Mark "local" qtests as slow to avoid unwanted breakage of "make check"
with some configurations (eg. Fedora's Copr automatic build system).

# gpg: Signature made Tue 24 Nov 2020 11:45:14 GMT
# gpg:                using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg:                 aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz-gitlab/tags/9p-fix-2020-11-24:
  tests/9pfs: Mark "local" tests as "slow"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Revert "hw/core/qdev-properties: Use qemu_strtoul() in set_pci_host_devaddr()"

This reverts commit bccb20c49df1bd683248a366021973901c11982f as it
introduced a regression blocking bus addresses > 0x1f or higher.
Legal bus numbers go up to 0xff.

Fixes: bccb20c49df ("Use qemu_strtoul() in set_pci_host_devaddr()")
Reported-by: Klaus Herman <kherman@inbox.lv>
Reported-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Message-Id: <20201120130409.956956-1-mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>