OSDN Git Service

config: move STDIO_FUTEXES up a bit
[uclinux-h8/uClibc.git] / TODO
diff --git a/TODO b/TODO
index 3882803..c6ad7bf 100644 (file)
--- a/TODO
+++ b/TODO
@@ -1,20 +1,61 @@
-TODO list for the uClibc 0.9.27 release:
+TODO list for every uClibc release:
 -------------------------------------------------
-    *) Fix syscall() on mips
-    *) Fix use of __secure in __uClibc_init() for so that we prevent
-       starting staticly linked SUID binaries where the standard file
-       descriptors are not opened.  For dynamically linked binaries,
-       ldso does this for us.
+    *) Test cris, i386, mips, mipsel, sh, x86_64, arm, armeb, and powerpc
+       with the latest LTP testsuite.  Fix any regressions and post LTP
+       testsuite results for each architecture on uclibc.org.
     *) Audit header files.  Remove prototypes for all functions that
        are not supported -- especially needed for the libm headers.
     *) Audit header files.  When options are disabled, also disable
        them in the include files as well by checking for the proper
        define from include/bits/uClibc_config.h (pulled in from features.h)
 
-
 TODO list for the uClibc 1.0.0 release:
 -------------------------------------------------
-
+    *) NPTL
+       support arches: (o todo; + done)
+       o alpha
+       + arm
+       o avr32
+       o bfin
+       o cris
+       o e1
+       o frv
+       o h8300
+       o hppa
+       + i386
+       o i960
+       o ia64
+       o m68k
+       o microblaze
+       + mips
+       o nios
+       o nios2
+       + powerpc
+       + sh
+       + sh64
+       o sparc
+       o v850
+       o vax
+       o x86_64
+       o xtensa
+       o ...
+    *) Go through SUSv4
+       TOC: http://www.opengroup.org/onlinepubs/9699919799/xrat/contents.html
+       shell (busybox): http://www.opengroup.org/onlinepubs/9699919799/xrat/V4_xcu_chap01.html#tag_22_01_01
+       interface:
+         http://www.opengroup.org/onlinepubs/9699919799/xrat/V4_xbd_chap13.html#tag_21_13_02
+         http://www.opengroup.org/onlinepubs/9699919799/xrat/V4_xsh_chap01.html#tag_23_01_01
+    *) glob / fnmatch tests fail
+    *) regex should pass AT&T conformance tests
+    *) Finish hiding uClibc internal symbols from our exported namespace
+    *) Add system for generating minimal system call asm wrappers that abuse
+       the C ABI to minimize amount of register/stack manipulation
+    *) Explicity add some sortof CONFIG_LINUX_2_2_ABI, CONFIG_LINUX_2_4_ABI
+       and CONFIG_LINUX_2_6_ABI type options, rather than having the abi
+       depend on the selected set of kernel headers.  This will likely also
+       require that we provide a set of kernel headers (probably a derivitive
+       of Mazur's linux-libc-headers) that can supplies the 2.2, 2.4, and 2.6
+       kernel abi.
     *) Documentation updates:
            *) Write a uClibc HOWTO document
            *) Update README document
@@ -32,11 +73,8 @@ TODO list for the uClibc 1.0.0 release:
        and perhaps others (finalize list) produce a lib with a differing
        ABI.  Make it so apps cannot use an ABI mis-matched uClibc.
        This is most easily done using symbol versioning...
-    *) Perhaps implement glibc style frame-unwinding, so that gcc need
-       not be built with --enable-sjlj-exceptions for C++ exception handling
-       to work.
-    *) Implement the float and long double versions of math funcs
-       using wrappers on top of the double versions (size / precision
+    *) Implement the long double versions of math funcs on interrested
+        arches using wrappers on top of the double versions (size / precision
        trade off where size clearly wins).
     *) Make all small objects (>~50 bytes) into either inlines or
        into a static library
@@ -44,26 +82,23 @@ TODO list for the uClibc 1.0.0 release:
        from ldso (such as HZ).  Other stuff it currently just makes
        up, which is obviously wrong.  Also bits/uClibc_clk_tck.h
        needs to be updated at the same time to get proper HZ values.
-    *)  It would nice if valgrind wouldn't complain about the atexit() malloc'd
-       memory for destructors, which happens since the dynamic linker calls
-       atexit(), which calls malloc() prior to valgrind starting, so valgrind
-       complains because it didn't see that memory allocated.
     *) poll emulation using select() for old 2.0.x uClinux kernels
        in libc/sysdeps/linux/common/poll.c fails some python self-tests.
        Of course, modern systems using the actuall poll() syscall work fine.
-    *) Rework the build system Makefile to eliminate recursive make.
-    *) Build both pic and non-pic objects where appropriate, so that
-       static libs need not pay the pic size penalty.
     *) Cleanup/scrub all the Makefile copyright junk
-    *) Debugging pthreads with gdb does not work at all on mips unless
-       the application is staticly linked.
     *) Fix dlopen, for both static and dynamic cases, and make it
        fully comply with SuSv3
+    *) check if sched_getcpu is only pulled in where it should be
+       *) remove HANDLE_OLDER_RLIMIT, NEW_GETRLIMIT (conditionalize on
+       ugetrlimit, it seems, else use the modern variant)
+       *) simplify exec*() in the light of execvpe (perhaps single internal
+       impl); USE_GNU for execvpe (and other GNU extensions, see psm).
 
 
 TODO list for AFTER the uClibc 1.0.0 release:
 -------------------------------------------------
-    *) Add support for Linux 2.6.x NPTL pthreads, futexes, etc
+    *) Add support for 64bit time (to deal withhttp://2038bug.com/):
+       date -s 011903142038 sets epoch to roll over in a few seconds (2^31)
     *) Add support for Linux 2.6.x fast vsyscalls
     *) Enable pristine source tree builds
     *) Fix regex so it isn't so stinking big
@@ -71,9 +106,37 @@ TODO list for AFTER the uClibc 1.0.0 release:
     *) run 'nm -D --size-sort -t d libuClibc-0.9.26.so' and work on the
        biggest things (i.e. stuff at the end of the list) to make
        them smaller.
+    *) Fix dlopen/dlsym/dlclose locking to more fine grained or use RCU
     <more wishlist items here>
 
 
+Arch specific TODO:
+-------------------------------------------------
+  alpha:
+    ldso is not implemented
+  arm:
+    update crt1 code again for nommu (http://bugs.uclibc.org/view.php?id=538)
+    recruit jbowler and integrate thumb support
+  frv:
+    needs to be updated for the new ldso changes and unification of the
+    uClibc_main funcs (__uClibc_start_main doesnt exist anymore)
+  hppa:
+    errno.c test segfaults causes segfault in clone.S (seems to be in glibc too)
+  i386:
+    add support for fast system calls
+  ia64:
+    ldso is not implemented
+  m68k:
+    ldso lazy relocation doesnt work
+  sh64:
+    ldso is reasonably broken, presently requiring additional
+    coaxing/threatening.
+  sparc:
+    need a sigaction.c since common one doesnt work (signal tests)
+    ldso needs to be updated since it's totally broken atm
+  vax:
+    pthread support, linktime warning support (implies GAS patches),
+    general touchups, testing, ldso.
 
 
 -----------------------------------------------------------------------------
@@ -88,6 +151,11 @@ Manuel's todo:
   d) Implement glibc 'a' flag for scanf string conversions.
   e) Allow use of the older non-table-based ctype functions when using
      stub locale support. (smaller)
+  f) __drand48_iterate should be void
+  g) alphasort vs. versionsort. The former seems to be SVID, the latter GNU
+     i.e. reverse to what we currently do. The latter is unimplemented.
+  h) ponder removal/configs to turn off: __xpg_*, bsd_signal, dysize,
+     getw/putw, utimes,
 
   2) Additional str{f|p}time issues.
   ----------------------------------
@@ -117,3 +185,4 @@ Manuel's todo:
   b) Write a space-efficient gettext substitute, to avoid storing large amounts
      of redundant data.
 
+