+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-######################################################################
-# Makefile Dec 2008
-#
-# SSLPROXY: Linux SSL Proxy Server
-# Copyright (C) 2008 NTT COMWARE Corporation.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-#
-######################################################################
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(srcdir)/sslproxy.spec.in $(top_srcdir)/configure compile \
- depcomp install-sh ltmain.sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = sslproxy.spec
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-SUBDIRS = logger parameter src conf sslfiles
-AUTOMAKE_OPTIONS = foreign
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-sslproxy.spec: $(top_builddir)/config.status $(srcdir)/sslproxy.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/.
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-recursive ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
- dist-tarZ dist-zip distcheck distclean distclean-generic \
- distclean-hdr distclean-recursive distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
+++ /dev/null
-#! /bin/sh
-# Wrapper for compilers which do not understand `-c -o'.
-
-scriptversion=2005-05-14.22
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand `-c -o'.
-Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file `INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "compile $scriptversion"
- exit $?
- ;;
-esac
-
-ofile=
-cfile=
-eat=
-
-for arg
-do
- if test -n "$eat"; then
- eat=
- else
- case $1 in
- -o)
- # configure might choose to run compile as `compile cc -o foo foo.c'.
- # So we strip `-o arg' only if arg is an object.
- eat=1
- case $2 in
- *.o | *.obj)
- ofile=$2
- ;;
- *)
- set x "$@" -o "$2"
- shift
- ;;
- esac
- ;;
- *.c)
- cfile=$1
- set x "$@" "$1"
- shift
- ;;
- *)
- set x "$@" "$1"
- shift
- ;;
- esac
- fi
- shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
- # If no `-o' option was seen then we might have been invoked from a
- # pattern rule where we don't need one. That is ok -- this is a
- # normal compilation that the losing compiler can handle. If no
- # `.c' file was seen then we are probably linking. That is also
- # ok.
- exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file. Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
-while true; do
- if mkdir "$lockdir" >/dev/null 2>&1; then
- break
- fi
- sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
- mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
- mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = conf
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-AUTOMAKE_OPTIONS = foreign
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign conf/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign conf/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-
-install:
- $(INSTALL) -b -m 644 -D ./sslproxy.logger_init.cf /etc/l7vs/sslproxy/sslproxy.logger_init.cf
- $(INSTALL) -b -m 644 -D ./sslproxy.target_1.cf /etc/l7vs/sslproxy/sslproxy.target_1.cf
- $(INSTALL) -b -m 644 -D ./sslproxy.target_2.cf /etc/l7vs/sslproxy/sslproxy.target_2.cf
- $(INSTALL) -b -m 644 -D ./sslproxyadm.cf /etc/l7vs/sslproxy/sslproxyadm.cf
- $(INSTALL) -b -m 644 -D ./sslproxyadm.logrotate /etc/logrotate.d/sslproxyadm
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* config.h.in. Generated from configure.in by autoheader. */
-
-/* Define to 1 if you have the `alarm' function. */
-#undef HAVE_ALARM
-
-/* Define to 1 if you have the `gethostname' function. */
-#undef HAVE_GETHOSTNAME
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the `localtime_r' function. */
-#undef HAVE_LOCALTIME_R
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `memset' function. */
-#undef HAVE_MEMSET
-
-/* Define to 1 if stdbool.h conforms to C99. */
-#undef HAVE_STDBOOL_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strftime' function. */
-#undef HAVE_STRFTIME
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if the system has the type `_Bool'. */
-#undef HAVE__BOOL
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define to 1 if your <sys/time.h> declares `struct tm'. */
-#undef TM_IN_SYS_TIME
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-#undef size_t
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="sslproxy"
-ac_unique_file="config.h.in"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP LN_S RANLIB ac_ct_RANLIB EGREP LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
- fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CXX_set=${CXX+set}
-ac_env_CXX_value=$CXX
-ac_cv_env_CXX_set=${CXX+set}
-ac_cv_env_CXX_value=$CXX
-ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_env_CXXFLAGS_value=$CXXFLAGS
-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
- cat <<_ACEOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
-
-Some influential environment variables:
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CC C compiler command
- CFLAGS C compiler flags
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-}
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- sed "/^$/d" confdefs.h | sort
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-PACKAGENAME=sslproxy
-VERSION=1.0.1-0
-
-am__api_version="1.9"
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL=$ac_install_sh
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,$program_prefix,;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$AWK" && break
-done
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE=$PACKAGENAME
- VERSION=$VERSION
-
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- STRIP=$ac_ct_STRIP
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-
- ac_config_headers="$ac_config_headers config.h"
-
-
-# Checks for programs.
-ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CXX" && break
-done
-test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
-
- CXX=$ac_ct_CXX
-fi
-
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5
-echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
- ;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
- break;;
- * )
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
-echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-CXXFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cxx_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
- ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-
-depcc="$CXX" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
- am__fastdepCXX_TRUE=
- am__fastdepCXX_FALSE='#'
-else
- am__fastdepCXX_TRUE='#'
- am__fastdepCXX_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CC" && break
-done
-
- CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
- *)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL=$ac_install_sh
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
- echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
-fi
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- RANLIB=$ac_ct_RANLIB
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-
-# Checks for libraries.
-
-echo "$as_me:$LINENO: checking for main in -llog4cxx" >&5
-echo $ECHO_N "checking for main in -llog4cxx... $ECHO_C" >&6
-if test "${ac_cv_lib_log4cxx_main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-llog4cxx $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_log4cxx_main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_log4cxx_main=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_log4cxx_main" >&5
-echo "${ECHO_T}$ac_cv_lib_log4cxx_main" >&6
-if test $ac_cv_lib_log4cxx_main = yes; then
- :
-else
- { { echo "$as_me:$LINENO: error: sslproxy require log4cxx library. " >&5
-echo "$as_me: error: sslproxy require log4cxx library. " >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-echo "$as_me:$LINENO: checking for main in -lrt" >&5
-echo $ECHO_N "checking for main in -lrt... $ECHO_C" >&6
-if test "${ac_cv_lib_rt_main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lrt $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_rt_main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_rt_main=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_rt_main" >&5
-echo "${ECHO_T}$ac_cv_lib_rt_main" >&6
-if test $ac_cv_lib_rt_main = yes; then
- :
-else
- { { echo "$as_me:$LINENO: error: sslproxy require rt library. " >&5
-echo "$as_me: error: sslproxy require rt library. " >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-echo "$as_me:$LINENO: checking for main in -lssl" >&5
-echo $ECHO_N "checking for main in -lssl... $ECHO_C" >&6
-if test "${ac_cv_lib_ssl_main+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lssl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-main ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_ssl_main=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ssl_main=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ssl_main" >&5
-echo "${ECHO_T}$ac_cv_lib_ssl_main" >&6
-if test $ac_cv_lib_ssl_main = yes; then
- :
-else
- { { echo "$as_me:$LINENO: error: sslproxy require ssl library. " >&5
-echo "$as_me: error: sslproxy require ssl library. " >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-# Checks for header files.
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-for ac_header in limits.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
- # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists. ##
-## ------------------------------------------ ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-# Checks for typedefs, structures, and compiler characteristics.
-echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
-echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6
-if test "${ac_cv_header_stdbool_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <stdbool.h>
-#ifndef bool
-# error bool is not defined
-#endif
-#ifndef false
-# error false is not defined
-#endif
-#if false
-# error false is not 0
-#endif
-#ifndef true
-# error true is not defined
-#endif
-#if true != 1
-# error true is not 1
-#endif
-#ifndef __bool_true_false_are_defined
-# error __bool_true_false_are_defined is not defined
-#endif
-
- struct s { _Bool s: 1; _Bool t; } s;
-
- char a[true == 1 ? 1 : -1];
- char b[false == 0 ? 1 : -1];
- char c[__bool_true_false_are_defined == 1 ? 1 : -1];
- char d[(bool) -0.5 == true ? 1 : -1];
- bool e = &s;
- char f[(_Bool) -0.0 == false ? 1 : -1];
- char g[true];
- char h[sizeof (_Bool)];
- char i[sizeof s.t];
-
-int
-main ()
-{
- return !a + !b + !c + !d + !e + !f + !g + !h + !i;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdbool_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdbool_h=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
-echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6
-echo "$as_me:$LINENO: checking for _Bool" >&5
-echo $ECHO_N "checking for _Bool... $ECHO_C" >&6
-if test "${ac_cv_type__Bool+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if ((_Bool *) 0)
- return 0;
-if (sizeof (_Bool))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type__Bool=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type__Bool=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-echo "${ECHO_T}$ac_cv_type__Bool" >&6
-if test $ac_cv_type__Bool = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE__BOOL 1
-_ACEOF
-
-
-fi
-
-if test $ac_cv_header_stdbool_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STDBOOL_H 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset x;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- }
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_const=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_const=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6
-if test $ac_cv_c_const = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define const
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for inline" >&5
-echo $ECHO_N "checking for inline... $ECHO_C" >&6
-if test "${ac_cv_c_inline+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_inline=$ac_kw; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-echo "${ECHO_T}$ac_cv_c_inline" >&6
-
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-if test "${ac_cv_type_size_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-if ((size_t *) 0)
- return 0;
-if (sizeof (size_t))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_size_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_size_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6
-if test $ac_cv_type_size_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
-echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
-if test "${ac_cv_struct_tm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <time.h>
-
-int
-main ()
-{
-struct tm *tp; tp->tm_sec;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_struct_tm=time.h
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
-echo "${ECHO_T}$ac_cv_struct_tm" >&6
-if test $ac_cv_struct_tm = sys/time.h; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TM_IN_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-# Checks for library functions.
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
-if test "${ac_cv_header_time+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_time=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_time=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-
-
-for ac_header in stdlib.h sys/time.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
- # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists. ##
-## ------------------------------------------ ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_func in alarm
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-echo "$as_me:$LINENO: checking for working mktime" >&5
-echo $ECHO_N "checking for working mktime... $ECHO_C" >&6
-if test "${ac_cv_func_working_mktime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_working_mktime=no
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Test program from Paul Eggert and Tony Leneis. */
-#if TIME_WITH_SYS_TIME
-# include <sys/time.h>
-# include <time.h>
-#else
-# if HAVE_SYS_TIME_H
-# include <sys/time.h>
-# else
-# include <time.h>
-# endif
-#endif
-
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#if !HAVE_ALARM
-# define alarm(X) /* empty */
-#endif
-
-/* Work around redefinition to rpl_putenv by other config tests. */
-#undef putenv
-
-static time_t time_t_max;
-static time_t time_t_min;
-
-/* Values we'll use to set the TZ environment variable. */
-static char *tz_strings[] = {
- (char *) 0, "TZ=GMT0", "TZ=JST-9",
- "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
-};
-#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
-
-/* Fail if mktime fails to convert a date in the spring-forward gap.
- Based on a problem report from Andreas Jaeger. */
-static void
-spring_forward_gap ()
-{
- /* glibc (up to about 1998-10-07) failed this test. */
- struct tm tm;
-
- /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
- instead of "TZ=America/Vancouver" in order to detect the bug even
- on systems that don't support the Olson extension, or don't have the
- full zoneinfo tables installed. */
- putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
-
- tm.tm_year = 98;
- tm.tm_mon = 3;
- tm.tm_mday = 5;
- tm.tm_hour = 2;
- tm.tm_min = 0;
- tm.tm_sec = 0;
- tm.tm_isdst = -1;
- if (mktime (&tm) == (time_t)-1)
- exit (1);
-}
-
-static void
-mktime_test1 (now)
- time_t now;
-{
- struct tm *lt;
- if ((lt = localtime (&now)) && mktime (lt) != now)
- exit (1);
-}
-
-static void
-mktime_test (now)
- time_t now;
-{
- mktime_test1 (now);
- mktime_test1 ((time_t) (time_t_max - now));
- mktime_test1 ((time_t) (time_t_min + now));
-}
-
-static void
-irix_6_4_bug ()
-{
- /* Based on code from Ariel Faigon. */
- struct tm tm;
- tm.tm_year = 96;
- tm.tm_mon = 3;
- tm.tm_mday = 0;
- tm.tm_hour = 0;
- tm.tm_min = 0;
- tm.tm_sec = 0;
- tm.tm_isdst = -1;
- mktime (&tm);
- if (tm.tm_mon != 2 || tm.tm_mday != 31)
- exit (1);
-}
-
-static void
-bigtime_test (j)
- int j;
-{
- struct tm tm;
- time_t now;
- tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
- now = mktime (&tm);
- if (now != (time_t) -1)
- {
- struct tm *lt = localtime (&now);
- if (! (lt
- && lt->tm_year == tm.tm_year
- && lt->tm_mon == tm.tm_mon
- && lt->tm_mday == tm.tm_mday
- && lt->tm_hour == tm.tm_hour
- && lt->tm_min == tm.tm_min
- && lt->tm_sec == tm.tm_sec
- && lt->tm_yday == tm.tm_yday
- && lt->tm_wday == tm.tm_wday
- && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
- == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
- exit (1);
- }
-}
-
-int
-main ()
-{
- time_t t, delta;
- int i, j;
-
- /* This test makes some buggy mktime implementations loop.
- Give up after 60 seconds; a mktime slower than that
- isn't worth using anyway. */
- alarm (60);
-
- for (time_t_max = 1; 0 < time_t_max; time_t_max *= 2)
- continue;
- time_t_max--;
- if ((time_t) -1 < 0)
- for (time_t_min = -1; (time_t) (time_t_min * 2) < 0; time_t_min *= 2)
- continue;
- delta = time_t_max / 997; /* a suitable prime number */
- for (i = 0; i < N_STRINGS; i++)
- {
- if (tz_strings[i])
- putenv (tz_strings[i]);
-
- for (t = 0; t <= time_t_max - delta; t += delta)
- mktime_test (t);
- mktime_test ((time_t) 1);
- mktime_test ((time_t) (60 * 60));
- mktime_test ((time_t) (60 * 60 * 24));
-
- for (j = 1; 0 < j; j *= 2)
- bigtime_test (j);
- bigtime_test (j - 1);
- }
- irix_6_4_bug ();
- spring_forward_gap ();
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_working_mktime=yes
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_working_mktime=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_working_mktime" >&5
-echo "${ECHO_T}$ac_cv_func_working_mktime" >&6
-if test $ac_cv_func_working_mktime = no; then
- case $LIBOBJS in
- "mktime.$ac_objext" | \
- *" mktime.$ac_objext" | \
- "mktime.$ac_objext "* | \
- *" mktime.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS mktime.$ac_objext" ;;
-esac
-
-fi
-
-
-for ac_func in strftime
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-else
- # strftime is in -lintl on SCO UNIX.
-echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
-echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6
-if test "${ac_cv_lib_intl_strftime+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char strftime ();
-int
-main ()
-{
-strftime ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_intl_strftime=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_intl_strftime=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
-echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6
-if test $ac_cv_lib_intl_strftime = yes; then
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRFTIME 1
-_ACEOF
-
-LIBS="-lintl $LIBS"
-fi
-
-fi
-done
-
-
-
-
-for ac_func in gethostname localtime_r memset
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-# application-specific option
-if test `uname -m` == "x86_64"; then
- libdir=/usr/lib64
-
-else
- libdir=/usr/lib
-
-fi
-
-CC=g++
-
-exec_prefix=/usr
-
- ac_config_files="$ac_config_files parameter/Makefile logger/Makefile Makefile src/Makefile conf/Makefile sslfiles/Makefile"
-
- ac_config_files="$ac_config_files sslproxy.spec"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "parameter/Makefile" ) CONFIG_FILES="$CONFIG_FILES parameter/Makefile" ;;
- "logger/Makefile" ) CONFIG_FILES="$CONFIG_FILES logger/Makefile" ;;
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "conf/Makefile" ) CONFIG_FILES="$CONFIG_FILES conf/Makefile" ;;
- "sslfiles/Makefile" ) CONFIG_FILES="$CONFIG_FILES sslfiles/Makefile" ;;
- "sslproxy.spec" ) CONFIG_FILES="$CONFIG_FILES sslproxy.spec" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@CXX@,$CXX,;t t
-s,@CXXFLAGS@,$CXXFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CXX@,$ac_ct_CXX,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CXXDEPMODE@,$CXXDEPMODE,;t t
-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@CPP@,$CPP,;t t
-s,@LN_S@,$LN_S,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h. The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status. Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless. Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo ' :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
- # Write a limited-size here document to $tmp/defines.sed.
- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo ' fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
- # Write a limited-size here document to $tmp/undefs.sed.
- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
- rm -f conftest.undefs
- mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
- if test x"$ac_file" != x-; then
- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- rm -f $ac_file
- mv $tmp/config.h $ac_file
- fi
- else
- cat $tmp/config.h
- rm -f $tmp/config.h
- fi
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
- { (exit 1); exit 1; }; }; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
- esac
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2005-07-09.11
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mecanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- shift
- shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = logger
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-AR = ar
-ARFLAGS = cru
-libsslproxy_logger_a_AR = $(AR) $(ARFLAGS)
-libsslproxy_logger_a_LIBADD =
-am_libsslproxy_logger_a_OBJECTS = \
- libsslproxy_logger_a-logger.$(OBJEXT) \
- libsslproxy_logger_a-logger_impl.$(OBJEXT) \
- libsslproxy_logger_a-strict_time_based_rolling_policy.$(OBJEXT) \
- libsslproxy_logger_a-time_and_size_based_rolling_policy.$(OBJEXT)
-libsslproxy_logger_a_OBJECTS = $(am_libsslproxy_logger_a_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
- -o $@
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libsslproxy_logger_a_SOURCES)
-DIST_SOURCES = $(libsslproxy_logger_a_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-noinst_LIBRARIES = libsslproxy_logger.a
-AUTOMAKE_OPTIONS = foreign
-libsslproxy_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libsslproxy_logger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
- -DVERSION=\"$(VERSION)\"
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign logger/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign logger/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libsslproxy_logger.a: $(libsslproxy_logger_a_OBJECTS) $(libsslproxy_logger_a_DEPENDENCIES)
- -rm -f libsslproxy_logger.a
- $(libsslproxy_logger_a_AR) libsslproxy_logger.a $(libsslproxy_logger_a_OBJECTS) $(libsslproxy_logger_a_LIBADD)
- $(RANLIB) libsslproxy_logger.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_logger_a-logger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_logger_a-logger_impl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-libsslproxy_logger_a-logger.o: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-logger.o -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo" -c -o libsslproxy_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo" "$(DEPDIR)/libsslproxy_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libsslproxy_logger_a-logger.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp
-
-libsslproxy_logger_a-logger.obj: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-logger.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo" -c -o libsslproxy_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo" "$(DEPDIR)/libsslproxy_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libsslproxy_logger_a-logger.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`
-
-libsslproxy_logger_a-logger_impl.o: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-logger_impl.o -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo" -c -o libsslproxy_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo" "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libsslproxy_logger_a-logger_impl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp
-
-libsslproxy_logger_a-logger_impl.obj: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-logger_impl.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo" -c -o libsslproxy_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo" "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libsslproxy_logger_a-logger_impl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`
-
-libsslproxy_logger_a-strict_time_based_rolling_policy.o: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-strict_time_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libsslproxy_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libsslproxy_logger_a-strict_time_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp
-
-libsslproxy_logger_a-strict_time_based_rolling_policy.obj: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-strict_time_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libsslproxy_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libsslproxy_logger_a-strict_time_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`
-
-libsslproxy_logger_a-time_and_size_based_rolling_policy.o: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-time_and_size_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libsslproxy_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libsslproxy_logger_a-time_and_size_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp
-
-libsslproxy_logger_a-time_and_size_based_rolling_policy.obj: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_logger_a-time_and_size_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libsslproxy_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsslproxy_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libsslproxy_logger_a-time_and_size_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstLIBRARIES ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# ltmain.sh - Provide generalized library-building support services.\r
-# NOTE: Changing this file will not affect anything until you rerun configure.\r
-#\r
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005\r
-# Free Software Foundation, Inc.\r
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996\r
-#\r
-# This program is free software; you can redistribute it and/or modify\r
-# it under the terms of the GNU General Public License as published by\r
-# the Free Software Foundation; either version 2 of the License, or\r
-# (at your option) any later version.\r
-#\r
-# This program is distributed in the hope that it will be useful, but\r
-# WITHOUT ANY WARRANTY; without even the implied warranty of\r
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
-# General Public License for more details.\r
-#\r
-# You should have received a copy of the GNU General Public License\r
-# along with this program; if not, write to the Free Software\r
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\r
-#\r
-# As a special exception to the GNU General Public License, if you\r
-# distribute this file as part of a program that contains a\r
-# configuration script generated by Autoconf, you may include it under\r
-# the same distribution terms that you use for the rest of that program.\r
-\r
-basename="s,^.*/,,g"\r
-\r
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh\r
-# is ksh but when the shell is invoked as "sh" and the current value of\r
-# the _XPG environment variable is not equal to 1 (one), the special\r
-# positional parameter $0, within a function call, is the name of the\r
-# function.\r
-progpath="$0"\r
-\r
-# The name of this program:\r
-progname=`echo "$progpath" | $SED $basename`\r
-modename="$progname"\r
-\r
-# Global variables:\r
-EXIT_SUCCESS=0\r
-EXIT_FAILURE=1\r
-\r
-PROGRAM=ltmain.sh\r
-PACKAGE=libtool\r
-VERSION=1.5.22\r
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"\r
-\r
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).\r
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then\r
- emulate sh\r
- NULLCMD=:\r
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which\r
- # is contrary to our usage. Disable this feature.\r
- alias -g '${1+"$@"}'='"$@"'\r
- setopt NO_GLOB_SUBST\r
-else\r
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac\r
-fi\r
-\r
-# Check that we have a working $echo.\r
-if test "X$1" = X--no-reexec; then\r
- # Discard the --no-reexec flag, and continue.\r
- shift\r
-elif test "X$1" = X--fallback-echo; then\r
- # Avoid inline document here, it may be left over\r
- :\r
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then\r
- # Yippee, $echo works!\r
- :\r
-else\r
- # Restart under the correct shell, and then maybe $echo will work.\r
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}\r
-fi\r
-\r
-if test "X$1" = X--fallback-echo; then\r
- # used as fallback echo\r
- shift\r
- cat <<EOF\r
-$*\r
-EOF\r
- exit $EXIT_SUCCESS\r
-fi\r
-\r
-default_mode=\r
-help="Try \`$progname --help' for more information."\r
-magic="%%%MAGIC variable%%%"\r
-mkdir="mkdir"\r
-mv="mv -f"\r
-rm="rm -f"\r
-\r
-# Sed substitution that helps us do robust quoting. It backslashifies\r
-# metacharacters that are still active within double-quoted strings.\r
-Xsed="${SED}"' -e 1s/^X//'\r
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'\r
-# test EBCDIC or ASCII\r
-case `echo X|tr X '\101'` in\r
- A) # ASCII based system\r
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr\r
- SP2NL='tr \040 \012'\r
- NL2SP='tr \015\012 \040\040'\r
- ;;\r
- *) # EBCDIC based system\r
- SP2NL='tr \100 \n'\r
- NL2SP='tr \r\n \100\100'\r
- ;;\r
-esac\r
-\r
-# NLS nuisances.\r
-# Only set LANG and LC_ALL to C if already set.\r
-# These must not be set unconditionally because not all systems understand\r
-# e.g. LANG=C (notably SCO).\r
-# We save the old values to restore during execute mode.\r
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES\r
-do\r
- eval "if test \"\${$lt_var+set}\" = set; then\r
- save_$lt_var=\$$lt_var\r
- $lt_var=C\r
- export $lt_var\r
- fi"\r
-done\r
-\r
-# Make sure IFS has a sensible default\r
-lt_nl='\r
-'\r
-IFS=" $lt_nl"\r
-\r
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then\r
- $echo "$modename: not configured to build any kind of library" 1>&2\r
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2\r
- exit $EXIT_FAILURE\r
-fi\r
-\r
-# Global variables.\r
-mode=$default_mode\r
-nonopt=\r
-prev=\r
-prevopt=\r
-run=\r
-show="$echo"\r
-show_help=\r
-execute_dlfiles=\r
-duplicate_deps=no\r
-preserve_args=\r
-lo2o="s/\\.lo\$/.${objext}/"\r
-o2lo="s/\\.${objext}\$/.lo/"\r
-extracted_archives=\r
-extracted_serial=0\r
-\r
-#####################################\r
-# Shell function definitions:\r
-# This seems to be the best place for them\r
-\r
-# func_mktempdir [string]\r
-# Make a temporary directory that won't clash with other running\r
-# libtool processes, and avoids race conditions if possible. If\r
-# given, STRING is the basename for that directory.\r
-func_mktempdir ()\r
-{\r
- my_template="${TMPDIR-/tmp}/${1-$progname}"\r
-\r
- if test "$run" = ":"; then\r
- # Return a directory name, but don't create it in dry-run mode\r
- my_tmpdir="${my_template}-$$"\r
- else\r
-\r
- # If mktemp works, use that first and foremost\r
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`\r
-\r
- if test ! -d "$my_tmpdir"; then\r
- # Failing that, at least try and use $RANDOM to avoid a race\r
- my_tmpdir="${my_template}-${RANDOM-0}$$"\r
-\r
- save_mktempdir_umask=`umask`\r
- umask 0077\r
- $mkdir "$my_tmpdir"\r
- umask $save_mktempdir_umask\r
- fi\r
-\r
- # If we're not in dry-run mode, bomb out on failure\r
- test -d "$my_tmpdir" || {\r
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2\r
- exit $EXIT_FAILURE\r
- }\r
- fi\r
-\r
- $echo "X$my_tmpdir" | $Xsed\r
-}\r
-\r
-\r
-# func_win32_libid arg\r
-# return the library type of file 'arg'\r
-#\r
-# Need a lot of goo to handle *both* DLLs and import libs\r
-# Has to be a shell function in order to 'eat' the argument\r
-# that is supplied when $file_magic_command is called.\r
-func_win32_libid ()\r
-{\r
- win32_libid_type="unknown"\r
- win32_fileres=`file -L $1 2>/dev/null`\r
- case $win32_fileres in\r
- *ar\ archive\ import\ library*) # definitely import\r
- win32_libid_type="x86 archive import"\r
- ;;\r
- *ar\ archive*) # could be an import, or static\r
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \\r
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then\r
- win32_nmres=`eval $NM -f posix -A $1 | \\r
- $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`\r
- case $win32_nmres in\r
- import*) win32_libid_type="x86 archive import";;\r
- *) win32_libid_type="x86 archive static";;\r
- esac\r
- fi\r
- ;;\r
- *DLL*)\r
- win32_libid_type="x86 DLL"\r
- ;;\r
- *executable*) # but shell scripts are "executable" too...\r
- case $win32_fileres in\r
- *MS\ Windows\ PE\ Intel*)\r
- win32_libid_type="x86 DLL"\r
- ;;\r
- esac\r
- ;;\r
- esac\r
- $echo $win32_libid_type\r
-}\r
-\r
-\r
-# func_infer_tag arg\r
-# Infer tagged configuration to use if any are available and\r
-# if one wasn't chosen via the "--tag" command line option.\r
-# Only attempt this if the compiler in the base compile\r
-# command doesn't match the default compiler.\r
-# arg is usually of the form 'gcc ...'\r
-func_infer_tag ()\r
-{\r
- if test -n "$available_tags" && test -z "$tagname"; then\r
- CC_quoted=\r
- for arg in $CC; do\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- CC_quoted="$CC_quoted $arg"\r
- done\r
- case $@ in\r
- # Blanks in the command may have been stripped by the calling shell,\r
- # but not from the CC environment variable when configure was run.\r
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;\r
- # Blanks at the start of $base_compile will cause this to fail\r
- # if we don't check for them as well.\r
- *)\r
- for z in $available_tags; do\r
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then\r
- # Evaluate the configuration.\r
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"\r
- CC_quoted=\r
- for arg in $CC; do\r
- # Double-quote args containing other shell metacharacters.\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- CC_quoted="$CC_quoted $arg"\r
- done\r
- case "$@ " in\r
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)\r
- # The compiler in the base compile command matches\r
- # the one in the tagged configuration.\r
- # Assume this is the tagged configuration we want.\r
- tagname=$z\r
- break\r
- ;;\r
- esac\r
- fi\r
- done\r
- # If $tagname still isn't set, then no tagged configuration\r
- # was found and let the user know that the "--tag" command\r
- # line option must be used.\r
- if test -z "$tagname"; then\r
- $echo "$modename: unable to infer tagged configuration"\r
- $echo "$modename: specify a tag with \`--tag'" 1>&2\r
- exit $EXIT_FAILURE\r
-# else\r
-# $echo "$modename: using $tagname tagged configuration"\r
- fi\r
- ;;\r
- esac\r
- fi\r
-}\r
-\r
-\r
-# func_extract_an_archive dir oldlib\r
-func_extract_an_archive ()\r
-{\r
- f_ex_an_ar_dir="$1"; shift\r
- f_ex_an_ar_oldlib="$1"\r
-\r
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"\r
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?\r
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then\r
- :\r
- else\r
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-}\r
-\r
-# func_extract_archives gentop oldlib ...\r
-func_extract_archives ()\r
-{\r
- my_gentop="$1"; shift\r
- my_oldlibs=${1+"$@"}\r
- my_oldobjs=""\r
- my_xlib=""\r
- my_xabs=""\r
- my_xdir=""\r
- my_status=""\r
-\r
- $show "${rm}r $my_gentop"\r
- $run ${rm}r "$my_gentop"\r
- $show "$mkdir $my_gentop"\r
- $run $mkdir "$my_gentop"\r
- my_status=$?\r
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then\r
- exit $my_status\r
- fi\r
-\r
- for my_xlib in $my_oldlibs; do\r
- # Extract the objects.\r
- case $my_xlib in\r
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;\r
- *) my_xabs=`pwd`"/$my_xlib" ;;\r
- esac\r
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`\r
- my_xlib_u=$my_xlib\r
- while :; do\r
- case " $extracted_archives " in\r
- *" $my_xlib_u "*)\r
- extracted_serial=`expr $extracted_serial + 1`\r
- my_xlib_u=lt$extracted_serial-$my_xlib ;;\r
- *) break ;;\r
- esac\r
- done\r
- extracted_archives="$extracted_archives $my_xlib_u"\r
- my_xdir="$my_gentop/$my_xlib_u"\r
-\r
- $show "${rm}r $my_xdir"\r
- $run ${rm}r "$my_xdir"\r
- $show "$mkdir $my_xdir"\r
- $run $mkdir "$my_xdir"\r
- exit_status=$?\r
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then\r
- exit $exit_status\r
- fi\r
- case $host in\r
- *-darwin*)\r
- $show "Extracting $my_xabs"\r
- # Do not bother doing anything if just a dry run\r
- if test -z "$run"; then\r
- darwin_orig_dir=`pwd`\r
- cd $my_xdir || exit $?\r
- darwin_archive=$my_xabs\r
- darwin_curdir=`pwd`\r
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`\r
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`\r
- if test -n "$darwin_arches"; then \r
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`\r
- darwin_arch=\r
- $show "$darwin_base_archive has multiple architectures $darwin_arches"\r
- for darwin_arch in $darwin_arches ; do\r
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"\r
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"\r
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"\r
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"\r
- cd "$darwin_curdir"\r
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"\r
- done # $darwin_arches\r
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)\r
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`\r
- darwin_file=\r
- darwin_files=\r
- for darwin_file in $darwin_filelist; do\r
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`\r
- lipo -create -output "$darwin_file" $darwin_files\r
- done # $darwin_filelist\r
- ${rm}r unfat-$$\r
- cd "$darwin_orig_dir"\r
- else\r
- cd "$darwin_orig_dir"\r
- func_extract_an_archive "$my_xdir" "$my_xabs"\r
- fi # $darwin_arches\r
- fi # $run\r
- ;;\r
- *)\r
- func_extract_an_archive "$my_xdir" "$my_xabs"\r
- ;;\r
- esac\r
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`\r
- done\r
- func_extract_archives_result="$my_oldobjs"\r
-}\r
-# End of Shell function definitions\r
-#####################################\r
-\r
-# Darwin sucks\r
-eval std_shrext=\"$shrext_cmds\"\r
-\r
-disable_libs=no\r
-\r
-# Parse our command line options once, thoroughly.\r
-while test "$#" -gt 0\r
-do\r
- arg="$1"\r
- shift\r
-\r
- case $arg in\r
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;\r
- *) optarg= ;;\r
- esac\r
-\r
- # If the previous option needs an argument, assign it.\r
- if test -n "$prev"; then\r
- case $prev in\r
- execute_dlfiles)\r
- execute_dlfiles="$execute_dlfiles $arg"\r
- ;;\r
- tag)\r
- tagname="$arg"\r
- preserve_args="${preserve_args}=$arg"\r
-\r
- # Check whether tagname contains only valid characters\r
- case $tagname in\r
- *[!-_A-Za-z0-9,/]*)\r
- $echo "$progname: invalid tag name: $tagname" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- case $tagname in\r
- CC)\r
- # Don't test for the "default" C tag, as we know, it's there, but\r
- # not specially marked.\r
- ;;\r
- *)\r
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then\r
- taglist="$taglist $tagname"\r
- # Evaluate the configuration.\r
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"\r
- else\r
- $echo "$progname: ignoring unknown tag $tagname" 1>&2\r
- fi\r
- ;;\r
- esac\r
- ;;\r
- *)\r
- eval "$prev=\$arg"\r
- ;;\r
- esac\r
-\r
- prev=\r
- prevopt=\r
- continue\r
- fi\r
-\r
- # Have we seen a non-optional argument yet?\r
- case $arg in\r
- --help)\r
- show_help=yes\r
- ;;\r
-\r
- --version)\r
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"\r
- $echo\r
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."\r
- $echo "This is free software; see the source for copying conditions. There is NO"\r
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."\r
- exit $?\r
- ;;\r
-\r
- --config)\r
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath\r
- # Now print the configurations for the tags.\r
- for tagname in $taglist; do\r
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"\r
- done\r
- exit $?\r
- ;;\r
-\r
- --debug)\r
- $echo "$progname: enabling shell trace mode"\r
- set -x\r
- preserve_args="$preserve_args $arg"\r
- ;;\r
-\r
- --dry-run | -n)\r
- run=:\r
- ;;\r
-\r
- --features)\r
- $echo "host: $host"\r
- if test "$build_libtool_libs" = yes; then\r
- $echo "enable shared libraries"\r
- else\r
- $echo "disable shared libraries"\r
- fi\r
- if test "$build_old_libs" = yes; then\r
- $echo "enable static libraries"\r
- else\r
- $echo "disable static libraries"\r
- fi\r
- exit $?\r
- ;;\r
-\r
- --finish) mode="finish" ;;\r
-\r
- --mode) prevopt="--mode" prev=mode ;;\r
- --mode=*) mode="$optarg" ;;\r
-\r
- --preserve-dup-deps) duplicate_deps="yes" ;;\r
-\r
- --quiet | --silent)\r
- show=:\r
- preserve_args="$preserve_args $arg"\r
- ;;\r
-\r
- --tag)\r
- prevopt="--tag"\r
- prev=tag\r
- preserve_args="$preserve_args --tag"\r
- ;;\r
- --tag=*)\r
- set tag "$optarg" ${1+"$@"}\r
- shift\r
- prev=tag\r
- preserve_args="$preserve_args --tag"\r
- ;;\r
-\r
- -dlopen)\r
- prevopt="-dlopen"\r
- prev=execute_dlfiles\r
- ;;\r
-\r
- -*)\r
- $echo "$modename: unrecognized option \`$arg'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
-\r
- *)\r
- nonopt="$arg"\r
- break\r
- ;;\r
- esac\r
-done\r
-\r
-if test -n "$prevopt"; then\r
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
-fi\r
-\r
-case $disable_libs in\r
-no) \r
- ;;\r
-shared)\r
- build_libtool_libs=no\r
- build_old_libs=yes\r
- ;;\r
-static)\r
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`\r
- ;;\r
-esac\r
-\r
-# If this variable is set in any of the actions, the command in it\r
-# will be execed at the end. This prevents here-documents from being\r
-# left over by shells.\r
-exec_cmd=\r
-\r
-if test -z "$show_help"; then\r
-\r
- # Infer the operation mode.\r
- if test -z "$mode"; then\r
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2\r
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2\r
- case $nonopt in\r
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)\r
- mode=link\r
- for arg\r
- do\r
- case $arg in\r
- -c)\r
- mode=compile\r
- break\r
- ;;\r
- esac\r
- done\r
- ;;\r
- *db | *dbx | *strace | *truss)\r
- mode=execute\r
- ;;\r
- *install*|cp|mv)\r
- mode=install\r
- ;;\r
- *rm)\r
- mode=uninstall\r
- ;;\r
- *)\r
- # If we have no mode, but dlfiles were specified, then do execute mode.\r
- test -n "$execute_dlfiles" && mode=execute\r
-\r
- # Just use the default operation mode.\r
- if test -z "$mode"; then\r
- if test -n "$nonopt"; then\r
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2\r
- else\r
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2\r
- fi\r
- fi\r
- ;;\r
- esac\r
- fi\r
-\r
- # Only execute mode is allowed to have -dlopen flags.\r
- if test -n "$execute_dlfiles" && test "$mode" != execute; then\r
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Change the help message to a mode-specific one.\r
- generic_help="$help"\r
- help="Try \`$modename --help --mode=$mode' for more information."\r
-\r
- # These modes are in order of execution frequency so that they run quickly.\r
- case $mode in\r
- # libtool compile mode\r
- compile)\r
- modename="$modename: compile"\r
- # Get the compilation command and the source file.\r
- base_compile=\r
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"\r
- suppress_opt=yes\r
- suppress_output=\r
- arg_mode=normal\r
- libobj=\r
- later=\r
-\r
- for arg\r
- do\r
- case $arg_mode in\r
- arg )\r
- # do not "continue". Instead, add this to base_compile\r
- lastarg="$arg"\r
- arg_mode=normal\r
- ;;\r
-\r
- target )\r
- libobj="$arg"\r
- arg_mode=normal\r
- continue\r
- ;;\r
-\r
- normal )\r
- # Accept any command-line options.\r
- case $arg in\r
- -o)\r
- if test -n "$libobj" ; then\r
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- arg_mode=target\r
- continue\r
- ;;\r
-\r
- -static | -prefer-pic | -prefer-non-pic)\r
- later="$later $arg"\r
- continue\r
- ;;\r
-\r
- -no-suppress)\r
- suppress_opt=no\r
- continue\r
- ;;\r
-\r
- -Xcompiler)\r
- arg_mode=arg # the next one goes into the "base_compile" arg list\r
- continue # The current "srcfile" will either be retained or\r
- ;; # replaced later. I would guess that would be a bug.\r
-\r
- -Wc,*)\r
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`\r
- lastarg=\r
- save_ifs="$IFS"; IFS=','\r
- for arg in $args; do\r
- IFS="$save_ifs"\r
-\r
- # Double-quote args containing other shell metacharacters.\r
- # Many Bourne shells cannot handle close brackets correctly\r
- # in scan sets, so we specify it separately.\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- lastarg="$lastarg $arg"\r
- done\r
- IFS="$save_ifs"\r
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`\r
-\r
- # Add the arguments to base_compile.\r
- base_compile="$base_compile $lastarg"\r
- continue\r
- ;;\r
-\r
- * )\r
- # Accept the current argument as the source file.\r
- # The previous "srcfile" becomes the current argument.\r
- #\r
- lastarg="$srcfile"\r
- srcfile="$arg"\r
- ;;\r
- esac # case $arg\r
- ;;\r
- esac # case $arg_mode\r
-\r
- # Aesthetically quote the previous argument.\r
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`\r
-\r
- case $lastarg in\r
- # Double-quote args containing other shell metacharacters.\r
- # Many Bourne shells cannot handle close brackets correctly\r
- # in scan sets, and some SunOS ksh mistreat backslash-escaping\r
- # in scan sets (worked around with variable expansion),\r
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets \r
- # at all, so we specify them separately.\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- lastarg="\"$lastarg\""\r
- ;;\r
- esac\r
-\r
- base_compile="$base_compile $lastarg"\r
- done # for arg\r
-\r
- case $arg_mode in\r
- arg)\r
- $echo "$modename: you must specify an argument for -Xcompile"\r
- exit $EXIT_FAILURE\r
- ;;\r
- target)\r
- $echo "$modename: you must specify a target with \`-o'" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- *)\r
- # Get the name of the library object.\r
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`\r
- ;;\r
- esac\r
-\r
- # Recognize several different file suffixes.\r
- # If the user specifies -o file.o, it is replaced with file.lo\r
- xform='[cCFSifmso]'\r
- case $libobj in\r
- *.ada) xform=ada ;;\r
- *.adb) xform=adb ;;\r
- *.ads) xform=ads ;;\r
- *.asm) xform=asm ;;\r
- *.c++) xform=c++ ;;\r
- *.cc) xform=cc ;;\r
- *.ii) xform=ii ;;\r
- *.class) xform=class ;;\r
- *.cpp) xform=cpp ;;\r
- *.cxx) xform=cxx ;;\r
- *.f90) xform=f90 ;;\r
- *.for) xform=for ;;\r
- *.java) xform=java ;;\r
- *.obj) xform=obj ;;\r
- esac\r
-\r
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`\r
-\r
- case $libobj in\r
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;\r
- *)\r
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- func_infer_tag $base_compile\r
-\r
- for arg in $later; do\r
- case $arg in\r
- -static)\r
- build_old_libs=yes\r
- continue\r
- ;;\r
-\r
- -prefer-pic)\r
- pic_mode=yes\r
- continue\r
- ;;\r
-\r
- -prefer-non-pic)\r
- pic_mode=no\r
- continue\r
- ;;\r
- esac\r
- done\r
-\r
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`\r
- case $qlibobj in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- qlibobj="\"$qlibobj\"" ;;\r
- esac\r
- test "X$libobj" != "X$qlibobj" \\r
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \\r
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."\r
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`\r
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$xdir" = "X$obj"; then\r
- xdir=\r
- else\r
- xdir=$xdir/\r
- fi\r
- lobj=${xdir}$objdir/$objname\r
-\r
- if test -z "$base_compile"; then\r
- $echo "$modename: you must specify a compilation command" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Delete any leftover library objects.\r
- if test "$build_old_libs" = yes; then\r
- removelist="$obj $lobj $libobj ${libobj}T"\r
- else\r
- removelist="$lobj $libobj ${libobj}T"\r
- fi\r
-\r
- $run $rm $removelist\r
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15\r
-\r
- # On Cygwin there's no "real" PIC flag so we must build both object types\r
- case $host_os in\r
- cygwin* | mingw* | pw32* | os2*)\r
- pic_mode=default\r
- ;;\r
- esac\r
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then\r
- # non-PIC code in shared libraries is not supported\r
- pic_mode=default\r
- fi\r
-\r
- # Calculate the filename of the output object if compiler does\r
- # not support -o with -c\r
- if test "$compiler_c_o" = no; then\r
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}\r
- lockfile="$output_obj.lock"\r
- removelist="$removelist $output_obj $lockfile"\r
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15\r
- else\r
- output_obj=\r
- need_locks=no\r
- lockfile=\r
- fi\r
-\r
- # Lock this critical section if it is needed\r
- # We use this script file to make the link, it avoids creating a new file\r
- if test "$need_locks" = yes; then\r
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do\r
- $show "Waiting for $lockfile to be removed"\r
- sleep 2\r
- done\r
- elif test "$need_locks" = warn; then\r
- if test -f "$lockfile"; then\r
- $echo "\\r
-*** ERROR, $lockfile exists and contains:\r
-`cat $lockfile 2>/dev/null`\r
-\r
-This indicates that another process is trying to use the same\r
-temporary object file, and libtool could not work around it because\r
-your compiler does not support \`-c' and \`-o' together. If you\r
-repeat this compilation, it may succeed, by chance, but you had better\r
-avoid parallel builds (make -j) in this platform, or get a better\r
-compiler."\r
-\r
- $run $rm $removelist\r
- exit $EXIT_FAILURE\r
- fi\r
- $echo "$srcfile" > "$lockfile"\r
- fi\r
-\r
- if test -n "$fix_srcfile_path"; then\r
- eval srcfile=\"$fix_srcfile_path\"\r
- fi\r
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`\r
- case $qsrcfile in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- qsrcfile="\"$qsrcfile\"" ;;\r
- esac\r
-\r
- $run $rm "$libobj" "${libobj}T"\r
-\r
- # Create a libtool object file (analogous to a ".la" file),\r
- # but don't create it if we're doing a dry run.\r
- test -z "$run" && cat > ${libobj}T <<EOF\r
-# $libobj - a libtool object file\r
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP\r
-#\r
-# Please DO NOT delete this file!\r
-# It is necessary for linking the library.\r
-\r
-# Name of the PIC object.\r
-EOF\r
-\r
- # Only build a PIC object if we are building libtool libraries.\r
- if test "$build_libtool_libs" = yes; then\r
- # Without this assignment, base_compile gets emptied.\r
- fbsd_hideous_sh_bug=$base_compile\r
-\r
- if test "$pic_mode" != no; then\r
- command="$base_compile $qsrcfile $pic_flag"\r
- else\r
- # Don't build PIC code\r
- command="$base_compile $qsrcfile"\r
- fi\r
-\r
- if test ! -d "${xdir}$objdir"; then\r
- $show "$mkdir ${xdir}$objdir"\r
- $run $mkdir ${xdir}$objdir\r
- exit_status=$?\r
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then\r
- exit $exit_status\r
- fi\r
- fi\r
-\r
- if test -z "$output_obj"; then\r
- # Place PIC objects in $objdir\r
- command="$command -o $lobj"\r
- fi\r
-\r
- $run $rm "$lobj" "$output_obj"\r
-\r
- $show "$command"\r
- if $run eval "$command"; then :\r
- else\r
- test -n "$output_obj" && $run $rm $removelist\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test "$need_locks" = warn &&\r
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then\r
- $echo "\\r
-*** ERROR, $lockfile contains:\r
-`cat $lockfile 2>/dev/null`\r
-\r
-but it should contain:\r
-$srcfile\r
-\r
-This indicates that another process is trying to use the same\r
-temporary object file, and libtool could not work around it because\r
-your compiler does not support \`-c' and \`-o' together. If you\r
-repeat this compilation, it may succeed, by chance, but you had better\r
-avoid parallel builds (make -j) in this platform, or get a better\r
-compiler."\r
-\r
- $run $rm $removelist\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Just move the object if needed, then go on to compile the next one\r
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then\r
- $show "$mv $output_obj $lobj"\r
- if $run $mv $output_obj $lobj; then :\r
- else\r
- error=$?\r
- $run $rm $removelist\r
- exit $error\r
- fi\r
- fi\r
-\r
- # Append the name of the PIC object to the libtool object file.\r
- test -z "$run" && cat >> ${libobj}T <<EOF\r
-pic_object='$objdir/$objname'\r
-\r
-EOF\r
-\r
- # Allow error messages only from the first compilation.\r
- if test "$suppress_opt" = yes; then\r
- suppress_output=' >/dev/null 2>&1'\r
- fi\r
- else\r
- # No PIC object so indicate it doesn't exist in the libtool\r
- # object file.\r
- test -z "$run" && cat >> ${libobj}T <<EOF\r
-pic_object=none\r
-\r
-EOF\r
- fi\r
-\r
- # Only build a position-dependent object if we build old libraries.\r
- if test "$build_old_libs" = yes; then\r
- if test "$pic_mode" != yes; then\r
- # Don't build PIC code\r
- command="$base_compile $qsrcfile"\r
- else\r
- command="$base_compile $qsrcfile $pic_flag"\r
- fi\r
- if test "$compiler_c_o" = yes; then\r
- command="$command -o $obj"\r
- fi\r
-\r
- # Suppress compiler output if we already did a PIC compilation.\r
- command="$command$suppress_output"\r
- $run $rm "$obj" "$output_obj"\r
- $show "$command"\r
- if $run eval "$command"; then :\r
- else\r
- $run $rm $removelist\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test "$need_locks" = warn &&\r
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then\r
- $echo "\\r
-*** ERROR, $lockfile contains:\r
-`cat $lockfile 2>/dev/null`\r
-\r
-but it should contain:\r
-$srcfile\r
-\r
-This indicates that another process is trying to use the same\r
-temporary object file, and libtool could not work around it because\r
-your compiler does not support \`-c' and \`-o' together. If you\r
-repeat this compilation, it may succeed, by chance, but you had better\r
-avoid parallel builds (make -j) in this platform, or get a better\r
-compiler."\r
-\r
- $run $rm $removelist\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Just move the object if needed\r
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then\r
- $show "$mv $output_obj $obj"\r
- if $run $mv $output_obj $obj; then :\r
- else\r
- error=$?\r
- $run $rm $removelist\r
- exit $error\r
- fi\r
- fi\r
-\r
- # Append the name of the non-PIC object the libtool object file.\r
- # Only append if the libtool object file exists.\r
- test -z "$run" && cat >> ${libobj}T <<EOF\r
-# Name of the non-PIC object.\r
-non_pic_object='$objname'\r
-\r
-EOF\r
- else\r
- # Append the name of the non-PIC object the libtool object file.\r
- # Only append if the libtool object file exists.\r
- test -z "$run" && cat >> ${libobj}T <<EOF\r
-# Name of the non-PIC object.\r
-non_pic_object=none\r
-\r
-EOF\r
- fi\r
-\r
- $run $mv "${libobj}T" "${libobj}"\r
-\r
- # Unlock the critical section if it was locked\r
- if test "$need_locks" != no; then\r
- $run $rm "$lockfile"\r
- fi\r
-\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
- # libtool link mode\r
- link | relink)\r
- modename="$modename: link"\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)\r
- # It is impossible to link a dll without this setting, and\r
- # we shouldn't force the makefile maintainer to figure out\r
- # which system we are compiling for in order to pass an extra\r
- # flag for every libtool invocation.\r
- # allow_undefined=no\r
-\r
- # FIXME: Unfortunately, there are problems with the above when trying\r
- # to make a dll which has undefined symbols, in which case not\r
- # even a static library is built. For now, we need to specify\r
- # -no-undefined on the libtool link line when we can be certain\r
- # that all symbols are satisfied, otherwise we get a static library.\r
- allow_undefined=yes\r
- ;;\r
- *)\r
- allow_undefined=yes\r
- ;;\r
- esac\r
- libtool_args="$nonopt"\r
- base_compile="$nonopt $@"\r
- compile_command="$nonopt"\r
- finalize_command="$nonopt"\r
-\r
- compile_rpath=\r
- finalize_rpath=\r
- compile_shlibpath=\r
- finalize_shlibpath=\r
- convenience=\r
- old_convenience=\r
- deplibs=\r
- old_deplibs=\r
- compiler_flags=\r
- linker_flags=\r
- dllsearchpath=\r
- lib_search_path=`pwd`\r
- inst_prefix_dir=\r
-\r
- avoid_version=no\r
- dlfiles=\r
- dlprefiles=\r
- dlself=no\r
- export_dynamic=no\r
- export_symbols=\r
- export_symbols_regex=\r
- generated=\r
- libobjs=\r
- ltlibs=\r
- module=no\r
- no_install=no\r
- objs=\r
- non_pic_objects=\r
- notinst_path= # paths that contain not-installed libtool libraries\r
- precious_files_regex=\r
- prefer_static_libs=no\r
- preload=no\r
- prev=\r
- prevarg=\r
- release=\r
- rpath=\r
- xrpath=\r
- perm_rpath=\r
- temp_rpath=\r
- thread_safe=no\r
- vinfo=\r
- vinfo_number=no\r
-\r
- func_infer_tag $base_compile\r
-\r
- # We need to know -static, to get the right output filenames.\r
- for arg\r
- do\r
- case $arg in\r
- -all-static | -static | -static-libtool-libs)\r
- case $arg in\r
- -all-static)\r
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then\r
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2\r
- fi\r
- if test -n "$link_static_flag"; then\r
- dlopen_self=$dlopen_self_static\r
- fi\r
- prefer_static_libs=yes\r
- ;;\r
- -static)\r
- if test -z "$pic_flag" && test -n "$link_static_flag"; then\r
- dlopen_self=$dlopen_self_static\r
- fi\r
- prefer_static_libs=built\r
- ;;\r
- -static-libtool-libs)\r
- if test -z "$pic_flag" && test -n "$link_static_flag"; then\r
- dlopen_self=$dlopen_self_static\r
- fi\r
- prefer_static_libs=yes\r
- ;;\r
- esac\r
- build_libtool_libs=no\r
- build_old_libs=yes\r
- break\r
- ;;\r
- esac\r
- done\r
-\r
- # See if our shared archives depend on static archives.\r
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes\r
-\r
- # Go through the arguments, transforming them on the way.\r
- while test "$#" -gt 0; do\r
- arg="$1"\r
- shift\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test\r
- ;;\r
- *) qarg=$arg ;;\r
- esac\r
- libtool_args="$libtool_args $qarg"\r
-\r
- # If the previous option needs an argument, assign it.\r
- if test -n "$prev"; then\r
- case $prev in\r
- output)\r
- compile_command="$compile_command @OUTPUT@"\r
- finalize_command="$finalize_command @OUTPUT@"\r
- ;;\r
- esac\r
-\r
- case $prev in\r
- dlfiles|dlprefiles)\r
- if test "$preload" = no; then\r
- # Add the symbol object into the linking commands.\r
- compile_command="$compile_command @SYMFILE@"\r
- finalize_command="$finalize_command @SYMFILE@"\r
- preload=yes\r
- fi\r
- case $arg in\r
- *.la | *.lo) ;; # We handle these cases below.\r
- force)\r
- if test "$dlself" = no; then\r
- dlself=needless\r
- export_dynamic=yes\r
- fi\r
- prev=\r
- continue\r
- ;;\r
- self)\r
- if test "$prev" = dlprefiles; then\r
- dlself=yes\r
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then\r
- dlself=yes\r
- else\r
- dlself=needless\r
- export_dynamic=yes\r
- fi\r
- prev=\r
- continue\r
- ;;\r
- *)\r
- if test "$prev" = dlfiles; then\r
- dlfiles="$dlfiles $arg"\r
- else\r
- dlprefiles="$dlprefiles $arg"\r
- fi\r
- prev=\r
- continue\r
- ;;\r
- esac\r
- ;;\r
- expsyms)\r
- export_symbols="$arg"\r
- if test ! -f "$arg"; then\r
- $echo "$modename: symbol file \`$arg' does not exist"\r
- exit $EXIT_FAILURE\r
- fi\r
- prev=\r
- continue\r
- ;;\r
- expsyms_regex)\r
- export_symbols_regex="$arg"\r
- prev=\r
- continue\r
- ;;\r
- inst_prefix)\r
- inst_prefix_dir="$arg"\r
- prev=\r
- continue\r
- ;;\r
- precious_regex)\r
- precious_files_regex="$arg"\r
- prev=\r
- continue\r
- ;;\r
- release)\r
- release="-$arg"\r
- prev=\r
- continue\r
- ;;\r
- objectlist)\r
- if test -f "$arg"; then\r
- save_arg=$arg\r
- moreargs=\r
- for fil in `cat $save_arg`\r
- do\r
-# moreargs="$moreargs $fil"\r
- arg=$fil\r
- # A libtool-controlled object.\r
-\r
- # Check to see that this really is a libtool object.\r
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- pic_object=\r
- non_pic_object=\r
-\r
- # Read the .lo file\r
- # If there is no directory component, then add one.\r
- case $arg in\r
- */* | *\\*) . $arg ;;\r
- *) . ./$arg ;;\r
- esac\r
-\r
- if test -z "$pic_object" || \\r
- test -z "$non_pic_object" ||\r
- test "$pic_object" = none && \\r
- test "$non_pic_object" = none; then\r
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Extract subdirectory from the argument.\r
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$xdir" = "X$arg"; then\r
- xdir=\r
- else\r
- xdir="$xdir/"\r
- fi\r
-\r
- if test "$pic_object" != none; then\r
- # Prepend the subdirectory the object is found in.\r
- pic_object="$xdir$pic_object"\r
-\r
- if test "$prev" = dlfiles; then\r
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then\r
- dlfiles="$dlfiles $pic_object"\r
- prev=\r
- continue\r
- else\r
- # If libtool objects are unsupported, then we need to preload.\r
- prev=dlprefiles\r
- fi\r
- fi\r
-\r
- # CHECK ME: I think I busted this. -Ossama\r
- if test "$prev" = dlprefiles; then\r
- # Preload the old-style object.\r
- dlprefiles="$dlprefiles $pic_object"\r
- prev=\r
- fi\r
-\r
- # A PIC object.\r
- libobjs="$libobjs $pic_object"\r
- arg="$pic_object"\r
- fi\r
-\r
- # Non-PIC object.\r
- if test "$non_pic_object" != none; then\r
- # Prepend the subdirectory the object is found in.\r
- non_pic_object="$xdir$non_pic_object"\r
-\r
- # A standard non-PIC object\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- if test -z "$pic_object" || test "$pic_object" = none ; then\r
- arg="$non_pic_object"\r
- fi\r
- else\r
- # If the PIC object exists, use it instead.\r
- # $xdir was prepended to $pic_object above.\r
- non_pic_object="$pic_object"\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- fi\r
- else\r
- # Only an error if not doing a dry-run.\r
- if test -z "$run"; then\r
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2\r
- exit $EXIT_FAILURE\r
- else\r
- # Dry-run case.\r
-\r
- # Extract subdirectory from the argument.\r
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$xdir" = "X$arg"; then\r
- xdir=\r
- else\r
- xdir="$xdir/"\r
- fi\r
-\r
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`\r
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`\r
- libobjs="$libobjs $pic_object"\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- fi\r
- fi\r
- done\r
- else\r
- $echo "$modename: link input file \`$save_arg' does not exist"\r
- exit $EXIT_FAILURE\r
- fi\r
- arg=$save_arg\r
- prev=\r
- continue\r
- ;;\r
- rpath | xrpath)\r
- # We need an absolute path.\r
- case $arg in\r
- [\\/]* | [A-Za-z]:[\\/]*) ;;\r
- *)\r
- $echo "$modename: only absolute run-paths are allowed" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
- if test "$prev" = rpath; then\r
- case "$rpath " in\r
- *" $arg "*) ;;\r
- *) rpath="$rpath $arg" ;;\r
- esac\r
- else\r
- case "$xrpath " in\r
- *" $arg "*) ;;\r
- *) xrpath="$xrpath $arg" ;;\r
- esac\r
- fi\r
- prev=\r
- continue\r
- ;;\r
- xcompiler)\r
- compiler_flags="$compiler_flags $qarg"\r
- prev=\r
- compile_command="$compile_command $qarg"\r
- finalize_command="$finalize_command $qarg"\r
- continue\r
- ;;\r
- xlinker)\r
- linker_flags="$linker_flags $qarg"\r
- compiler_flags="$compiler_flags $wl$qarg"\r
- prev=\r
- compile_command="$compile_command $wl$qarg"\r
- finalize_command="$finalize_command $wl$qarg"\r
- continue\r
- ;;\r
- xcclinker)\r
- linker_flags="$linker_flags $qarg"\r
- compiler_flags="$compiler_flags $qarg"\r
- prev=\r
- compile_command="$compile_command $qarg"\r
- finalize_command="$finalize_command $qarg"\r
- continue\r
- ;;\r
- shrext)\r
- shrext_cmds="$arg"\r
- prev=\r
- continue\r
- ;;\r
- darwin_framework|darwin_framework_skip)\r
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- prev=\r
- continue\r
- ;;\r
- *)\r
- eval "$prev=\"\$arg\""\r
- prev=\r
- continue\r
- ;;\r
- esac\r
- fi # test -n "$prev"\r
-\r
- prevarg="$arg"\r
-\r
- case $arg in\r
- -all-static)\r
- if test -n "$link_static_flag"; then\r
- compile_command="$compile_command $link_static_flag"\r
- finalize_command="$finalize_command $link_static_flag"\r
- fi\r
- continue\r
- ;;\r
-\r
- -allow-undefined)\r
- # FIXME: remove this flag sometime in the future.\r
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2\r
- continue\r
- ;;\r
-\r
- -avoid-version)\r
- avoid_version=yes\r
- continue\r
- ;;\r
-\r
- -dlopen)\r
- prev=dlfiles\r
- continue\r
- ;;\r
-\r
- -dlpreopen)\r
- prev=dlprefiles\r
- continue\r
- ;;\r
-\r
- -export-dynamic)\r
- export_dynamic=yes\r
- continue\r
- ;;\r
-\r
- -export-symbols | -export-symbols-regex)\r
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then\r
- $echo "$modename: more than one -exported-symbols argument is not allowed"\r
- exit $EXIT_FAILURE\r
- fi\r
- if test "X$arg" = "X-export-symbols"; then\r
- prev=expsyms\r
- else\r
- prev=expsyms_regex\r
- fi\r
- continue\r
- ;;\r
-\r
- -framework|-arch|-isysroot)\r
- case " $CC " in\r
- *" ${arg} ${1} "* | *" ${arg} ${1} "*) \r
- prev=darwin_framework_skip ;;\r
- *) compiler_flags="$compiler_flags $arg"\r
- prev=darwin_framework ;;\r
- esac\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- continue\r
- ;;\r
-\r
- -inst-prefix-dir)\r
- prev=inst_prefix\r
- continue\r
- ;;\r
-\r
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*\r
- # so, if we see these flags be careful not to treat them like -L\r
- -L[A-Z][A-Z]*:*)\r
- case $with_gcc/$host in\r
- no/*-*-irix* | /*-*-irix*)\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- ;;\r
- esac\r
- continue\r
- ;;\r
-\r
- -L*)\r
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`\r
- # We need an absolute path.\r
- case $dir in\r
- [\\/]* | [A-Za-z]:[\\/]*) ;;\r
- *)\r
- absdir=`cd "$dir" && pwd`\r
- if test -z "$absdir"; then\r
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2\r
- absdir="$dir"\r
- notinst_path="$notinst_path $dir"\r
- fi\r
- dir="$absdir"\r
- ;;\r
- esac\r
- case "$deplibs " in\r
- *" -L$dir "*) ;;\r
- *)\r
- deplibs="$deplibs -L$dir"\r
- lib_search_path="$lib_search_path $dir"\r
- ;;\r
- esac\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)\r
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`\r
- case :$dllsearchpath: in\r
- *":$dir:"*) ;;\r
- *) dllsearchpath="$dllsearchpath:$dir";;\r
- esac\r
- case :$dllsearchpath: in\r
- *":$testbindir:"*) ;;\r
- *) dllsearchpath="$dllsearchpath:$testbindir";;\r
- esac\r
- ;;\r
- esac\r
- continue\r
- ;;\r
-\r
- -l*)\r
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)\r
- # These systems don't actually have a C or math library (as such)\r
- continue\r
- ;;\r
- *-*-os2*)\r
- # These systems don't actually have a C library (as such)\r
- test "X$arg" = "X-lc" && continue\r
- ;;\r
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)\r
- # Do not include libc due to us having libc/libc_r.\r
- test "X$arg" = "X-lc" && continue\r
- ;;\r
- *-*-rhapsody* | *-*-darwin1.[012])\r
- # Rhapsody C and math libraries are in the System framework\r
- deplibs="$deplibs -framework System"\r
- continue\r
- ;;\r
- *-*-sco3.2v5* | *-*-sco5v6*)\r
- # Causes problems with __ctype\r
- test "X$arg" = "X-lc" && continue\r
- ;;\r
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)\r
- # Compiler inserts libc in the correct place for threads to work\r
- test "X$arg" = "X-lc" && continue\r
- ;;\r
- esac\r
- elif test "X$arg" = "X-lc_r"; then\r
- case $host in\r
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)\r
- # Do not include libc_r directly, use -pthread flag.\r
- continue\r
- ;;\r
- esac\r
- fi\r
- deplibs="$deplibs $arg"\r
- continue\r
- ;;\r
-\r
- # Tru64 UNIX uses -model [arg] to determine the layout of C++\r
- # classes, name mangling, and exception handling.\r
- -model)\r
- compile_command="$compile_command $arg"\r
- compiler_flags="$compiler_flags $arg"\r
- finalize_command="$finalize_command $arg"\r
- prev=xcompiler\r
- continue\r
- ;;\r
-\r
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)\r
- compiler_flags="$compiler_flags $arg"\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- continue\r
- ;;\r
-\r
- -module)\r
- module=yes\r
- continue\r
- ;;\r
-\r
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler\r
- # -r[0-9][0-9]* specifies the processor on the SGI compiler\r
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler\r
- # +DA*, +DD* enable 64-bit mode on the HP compiler\r
- # -q* pass through compiler args for the IBM compiler\r
- # -m* pass through architecture-specific compiler args for GCC\r
- # -m*, -t[45]*, -txscale* pass through architecture-specific\r
- # compiler args for GCC\r
- # -pg pass through profiling flag for GCC\r
- # @file GCC response files\r
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \\r
- -t[45]*|-txscale*|@*)\r
-\r
- # Unknown arguments in both finalize_command and compile_command need\r
- # to be aesthetically quoted because they are evaled later.\r
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- compiler_flags="$compiler_flags $arg"\r
- continue\r
- ;;\r
-\r
- -shrext)\r
- prev=shrext\r
- continue\r
- ;;\r
-\r
- -no-fast-install)\r
- fast_install=no\r
- continue\r
- ;;\r
-\r
- -no-install)\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)\r
- # The PATH hackery in wrapper scripts is required on Windows\r
- # in order for the loader to find any dlls it needs.\r
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2\r
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2\r
- fast_install=no\r
- ;;\r
- *) no_install=yes ;;\r
- esac\r
- continue\r
- ;;\r
-\r
- -no-undefined)\r
- allow_undefined=no\r
- continue\r
- ;;\r
-\r
- -objectlist)\r
- prev=objectlist\r
- continue\r
- ;;\r
-\r
- -o) prev=output ;;\r
-\r
- -precious-files-regex)\r
- prev=precious_regex\r
- continue\r
- ;;\r
-\r
- -release)\r
- prev=release\r
- continue\r
- ;;\r
-\r
- -rpath)\r
- prev=rpath\r
- continue\r
- ;;\r
-\r
- -R)\r
- prev=xrpath\r
- continue\r
- ;;\r
-\r
- -R*)\r
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`\r
- # We need an absolute path.\r
- case $dir in\r
- [\\/]* | [A-Za-z]:[\\/]*) ;;\r
- *)\r
- $echo "$modename: only absolute run-paths are allowed" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
- case "$xrpath " in\r
- *" $dir "*) ;;\r
- *) xrpath="$xrpath $dir" ;;\r
- esac\r
- continue\r
- ;;\r
-\r
- -static | -static-libtool-libs)\r
- # The effects of -static are defined in a previous loop.\r
- # We used to do the same as -all-static on platforms that\r
- # didn't have a PIC flag, but the assumption that the effects\r
- # would be equivalent was wrong. It would break on at least\r
- # Digital Unix and AIX.\r
- continue\r
- ;;\r
-\r
- -thread-safe)\r
- thread_safe=yes\r
- continue\r
- ;;\r
-\r
- -version-info)\r
- prev=vinfo\r
- continue\r
- ;;\r
- -version-number)\r
- prev=vinfo\r
- vinfo_number=yes\r
- continue\r
- ;;\r
-\r
- -Wc,*)\r
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`\r
- arg=\r
- save_ifs="$IFS"; IFS=','\r
- for flag in $args; do\r
- IFS="$save_ifs"\r
- case $flag in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- flag="\"$flag\""\r
- ;;\r
- esac\r
- arg="$arg $wl$flag"\r
- compiler_flags="$compiler_flags $flag"\r
- done\r
- IFS="$save_ifs"\r
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`\r
- ;;\r
-\r
- -Wl,*)\r
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`\r
- arg=\r
- save_ifs="$IFS"; IFS=','\r
- for flag in $args; do\r
- IFS="$save_ifs"\r
- case $flag in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- flag="\"$flag\""\r
- ;;\r
- esac\r
- arg="$arg $wl$flag"\r
- compiler_flags="$compiler_flags $wl$flag"\r
- linker_flags="$linker_flags $flag"\r
- done\r
- IFS="$save_ifs"\r
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`\r
- ;;\r
-\r
- -Xcompiler)\r
- prev=xcompiler\r
- continue\r
- ;;\r
-\r
- -Xlinker)\r
- prev=xlinker\r
- continue\r
- ;;\r
-\r
- -XCClinker)\r
- prev=xcclinker\r
- continue\r
- ;;\r
-\r
- # Some other compiler flag.\r
- -* | +*)\r
- # Unknown arguments in both finalize_command and compile_command need\r
- # to be aesthetically quoted because they are evaled later.\r
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- ;;\r
-\r
- *.$objext)\r
- # A standard object.\r
- objs="$objs $arg"\r
- ;;\r
-\r
- *.lo)\r
- # A libtool-controlled object.\r
-\r
- # Check to see that this really is a libtool object.\r
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- pic_object=\r
- non_pic_object=\r
-\r
- # Read the .lo file\r
- # If there is no directory component, then add one.\r
- case $arg in\r
- */* | *\\*) . $arg ;;\r
- *) . ./$arg ;;\r
- esac\r
-\r
- if test -z "$pic_object" || \\r
- test -z "$non_pic_object" ||\r
- test "$pic_object" = none && \\r
- test "$non_pic_object" = none; then\r
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Extract subdirectory from the argument.\r
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$xdir" = "X$arg"; then\r
- xdir=\r
- else\r
- xdir="$xdir/"\r
- fi\r
-\r
- if test "$pic_object" != none; then\r
- # Prepend the subdirectory the object is found in.\r
- pic_object="$xdir$pic_object"\r
-\r
- if test "$prev" = dlfiles; then\r
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then\r
- dlfiles="$dlfiles $pic_object"\r
- prev=\r
- continue\r
- else\r
- # If libtool objects are unsupported, then we need to preload.\r
- prev=dlprefiles\r
- fi\r
- fi\r
-\r
- # CHECK ME: I think I busted this. -Ossama\r
- if test "$prev" = dlprefiles; then\r
- # Preload the old-style object.\r
- dlprefiles="$dlprefiles $pic_object"\r
- prev=\r
- fi\r
-\r
- # A PIC object.\r
- libobjs="$libobjs $pic_object"\r
- arg="$pic_object"\r
- fi\r
-\r
- # Non-PIC object.\r
- if test "$non_pic_object" != none; then\r
- # Prepend the subdirectory the object is found in.\r
- non_pic_object="$xdir$non_pic_object"\r
-\r
- # A standard non-PIC object\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- if test -z "$pic_object" || test "$pic_object" = none ; then\r
- arg="$non_pic_object"\r
- fi\r
- else\r
- # If the PIC object exists, use it instead.\r
- # $xdir was prepended to $pic_object above.\r
- non_pic_object="$pic_object"\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- fi\r
- else\r
- # Only an error if not doing a dry-run.\r
- if test -z "$run"; then\r
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2\r
- exit $EXIT_FAILURE\r
- else\r
- # Dry-run case.\r
-\r
- # Extract subdirectory from the argument.\r
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$xdir" = "X$arg"; then\r
- xdir=\r
- else\r
- xdir="$xdir/"\r
- fi\r
-\r
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`\r
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`\r
- libobjs="$libobjs $pic_object"\r
- non_pic_objects="$non_pic_objects $non_pic_object"\r
- fi\r
- fi\r
- ;;\r
-\r
- *.$libext)\r
- # An archive.\r
- deplibs="$deplibs $arg"\r
- old_deplibs="$old_deplibs $arg"\r
- continue\r
- ;;\r
-\r
- *.la)\r
- # A libtool-controlled library.\r
-\r
- if test "$prev" = dlfiles; then\r
- # This library was specified with -dlopen.\r
- dlfiles="$dlfiles $arg"\r
- prev=\r
- elif test "$prev" = dlprefiles; then\r
- # The library was specified with -dlpreopen.\r
- dlprefiles="$dlprefiles $arg"\r
- prev=\r
- else\r
- deplibs="$deplibs $arg"\r
- fi\r
- continue\r
- ;;\r
-\r
- # Some other compiler argument.\r
- *)\r
- # Unknown arguments in both finalize_command and compile_command need\r
- # to be aesthetically quoted because they are evaled later.\r
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- ;;\r
- esac # arg\r
-\r
- # Now actually substitute the argument into the commands.\r
- if test -n "$arg"; then\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- fi\r
- done # argument parsing loop\r
-\r
- if test -n "$prev"; then\r
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then\r
- eval arg=\"$export_dynamic_flag_spec\"\r
- compile_command="$compile_command $arg"\r
- finalize_command="$finalize_command $arg"\r
- fi\r
-\r
- oldlibs=\r
- # calculate the name of the file, without its directory\r
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`\r
- libobjs_save="$libobjs"\r
-\r
- if test -n "$shlibpath_var"; then\r
- # get the directories listed in $shlibpath_var\r
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`\r
- else\r
- shlib_search_path=\r
- fi\r
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"\r
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"\r
-\r
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$output_objdir" = "X$output"; then\r
- output_objdir="$objdir"\r
- else\r
- output_objdir="$output_objdir/$objdir"\r
- fi\r
- # Create the object directory.\r
- if test ! -d "$output_objdir"; then\r
- $show "$mkdir $output_objdir"\r
- $run $mkdir $output_objdir\r
- exit_status=$?\r
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then\r
- exit $exit_status\r
- fi\r
- fi\r
-\r
- # Determine the type of output\r
- case $output in\r
- "")\r
- $echo "$modename: you must specify an output file" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- *.$libext) linkmode=oldlib ;;\r
- *.lo | *.$objext) linkmode=obj ;;\r
- *.la) linkmode=lib ;;\r
- *) linkmode=prog ;; # Anything else should be a program.\r
- esac\r
-\r
- case $host in\r
- *cygwin* | *mingw* | *pw32*)\r
- # don't eliminate duplications in $postdeps and $predeps\r
- duplicate_compiler_generated_deps=yes\r
- ;;\r
- *)\r
- duplicate_compiler_generated_deps=$duplicate_deps\r
- ;;\r
- esac\r
- specialdeplibs=\r
-\r
- libs=\r
- # Find all interdependent deplibs by searching for libraries\r
- # that are linked more than once (e.g. -la -lb -la)\r
- for deplib in $deplibs; do\r
- if test "X$duplicate_deps" = "Xyes" ; then\r
- case "$libs " in\r
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;\r
- esac\r
- fi\r
- libs="$libs $deplib"\r
- done\r
-\r
- if test "$linkmode" = lib; then\r
- libs="$predeps $libs $compiler_lib_search_path $postdeps"\r
-\r
- # Compute libraries that are listed more than once in $predeps\r
- # $postdeps and mark them as special (i.e., whose duplicates are\r
- # not to be eliminated).\r
- pre_post_deps=\r
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then\r
- for pre_post_dep in $predeps $postdeps; do\r
- case "$pre_post_deps " in\r
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;\r
- esac\r
- pre_post_deps="$pre_post_deps $pre_post_dep"\r
- done\r
- fi\r
- pre_post_deps=\r
- fi\r
-\r
- deplibs=\r
- newdependency_libs=\r
- newlib_search_path=\r
- need_relink=no # whether we're linking any uninstalled libtool libraries\r
- notinst_deplibs= # not-installed libtool libraries\r
- case $linkmode in\r
- lib)\r
- passes="conv link"\r
- for file in $dlfiles $dlprefiles; do\r
- case $file in\r
- *.la) ;;\r
- *)\r
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
- done\r
- ;;\r
- prog)\r
- compile_deplibs=\r
- finalize_deplibs=\r
- alldeplibs=no\r
- newdlfiles=\r
- newdlprefiles=\r
- passes="conv scan dlopen dlpreopen link"\r
- ;;\r
- *) passes="conv"\r
- ;;\r
- esac\r
- for pass in $passes; do\r
- if test "$linkmode,$pass" = "lib,link" ||\r
- test "$linkmode,$pass" = "prog,scan"; then\r
- libs="$deplibs"\r
- deplibs=\r
- fi\r
- if test "$linkmode" = prog; then\r
- case $pass in\r
- dlopen) libs="$dlfiles" ;;\r
- dlpreopen) libs="$dlprefiles" ;;\r
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;\r
- esac\r
- fi\r
- if test "$pass" = dlopen; then\r
- # Collect dlpreopened libraries\r
- save_deplibs="$deplibs"\r
- deplibs=\r
- fi\r
- for deplib in $libs; do\r
- lib=\r
- found=no\r
- case $deplib in\r
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)\r
- if test "$linkmode,$pass" = "prog,link"; then\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- else\r
- compiler_flags="$compiler_flags $deplib"\r
- fi\r
- continue\r
- ;;\r
- -l*)\r
- if test "$linkmode" != lib && test "$linkmode" != prog; then\r
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2\r
- continue\r
- fi\r
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`\r
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do\r
- for search_ext in .la $std_shrext .so .a; do\r
- # Search the libtool library\r
- lib="$searchdir/lib${name}${search_ext}"\r
- if test -f "$lib"; then\r
- if test "$search_ext" = ".la"; then\r
- found=yes\r
- else\r
- found=no\r
- fi\r
- break 2\r
- fi\r
- done\r
- done\r
- if test "$found" != yes; then\r
- # deplib doesn't seem to be a libtool library\r
- if test "$linkmode,$pass" = "prog,link"; then\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- else\r
- deplibs="$deplib $deplibs"\r
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"\r
- fi\r
- continue\r
- else # deplib is a libtool library\r
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,\r
- # We need to do some special things here, and not later.\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- case " $predeps $postdeps " in\r
- *" $deplib "*)\r
- if (${SED} -e '2q' $lib |\r
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- library_names=\r
- old_library=\r
- case $lib in\r
- */* | *\\*) . $lib ;;\r
- *) . ./$lib ;;\r
- esac\r
- for l in $old_library $library_names; do\r
- ll="$l"\r
- done\r
- if test "X$ll" = "X$old_library" ; then # only static version available\r
- found=no\r
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$ladir" = "X$lib" && ladir="."\r
- lib=$ladir/$old_library\r
- if test "$linkmode,$pass" = "prog,link"; then\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- else\r
- deplibs="$deplib $deplibs"\r
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"\r
- fi\r
- continue\r
- fi\r
- fi\r
- ;;\r
- *) ;;\r
- esac\r
- fi\r
- fi\r
- ;; # -l\r
- -L*)\r
- case $linkmode in\r
- lib)\r
- deplibs="$deplib $deplibs"\r
- test "$pass" = conv && continue\r
- newdependency_libs="$deplib $newdependency_libs"\r
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`\r
- ;;\r
- prog)\r
- if test "$pass" = conv; then\r
- deplibs="$deplib $deplibs"\r
- continue\r
- fi\r
- if test "$pass" = scan; then\r
- deplibs="$deplib $deplibs"\r
- else\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- fi\r
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`\r
- ;;\r
- *)\r
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2\r
- ;;\r
- esac # linkmode\r
- continue\r
- ;; # -L\r
- -R*)\r
- if test "$pass" = link; then\r
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`\r
- # Make sure the xrpath contains only unique directories.\r
- case "$xrpath " in\r
- *" $dir "*) ;;\r
- *) xrpath="$xrpath $dir" ;;\r
- esac\r
- fi\r
- deplibs="$deplib $deplibs"\r
- continue\r
- ;;\r
- *.la) lib="$deplib" ;;\r
- *.$libext)\r
- if test "$pass" = conv; then\r
- deplibs="$deplib $deplibs"\r
- continue\r
- fi\r
- case $linkmode in\r
- lib)\r
- valid_a_lib=no\r
- case $deplibs_check_method in\r
- match_pattern*)\r
- set dummy $deplibs_check_method\r
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`\r
- if eval $echo \"$deplib\" 2>/dev/null \\r
- | $SED 10q \\r
- | $EGREP "$match_pattern_regex" > /dev/null; then\r
- valid_a_lib=yes\r
- fi\r
- ;;\r
- pass_all)\r
- valid_a_lib=yes\r
- ;;\r
- esac\r
- if test "$valid_a_lib" != yes; then\r
- $echo\r
- $echo "*** Warning: Trying to link with static lib archive $deplib."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which you do not appear to have"\r
- $echo "*** because the file extensions .$libext of this argument makes me believe"\r
- $echo "*** that it is just a static archive that I should not used here."\r
- else\r
- $echo\r
- $echo "*** Warning: Linking the shared library $output against the"\r
- $echo "*** static library $deplib is not portable!"\r
- deplibs="$deplib $deplibs"\r
- fi\r
- continue\r
- ;;\r
- prog)\r
- if test "$pass" != link; then\r
- deplibs="$deplib $deplibs"\r
- else\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- fi\r
- continue\r
- ;;\r
- esac # linkmode\r
- ;; # *.$libext\r
- *.lo | *.$objext)\r
- if test "$pass" = conv; then\r
- deplibs="$deplib $deplibs"\r
- elif test "$linkmode" = prog; then\r
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then\r
- # If there is no dlopen support or we're linking statically,\r
- # we need to preload.\r
- newdlprefiles="$newdlprefiles $deplib"\r
- compile_deplibs="$deplib $compile_deplibs"\r
- finalize_deplibs="$deplib $finalize_deplibs"\r
- else\r
- newdlfiles="$newdlfiles $deplib"\r
- fi\r
- fi\r
- continue\r
- ;;\r
- %DEPLIBS%)\r
- alldeplibs=yes\r
- continue\r
- ;;\r
- esac # case $deplib\r
- if test "$found" = yes || test -f "$lib"; then :\r
- else\r
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Check to see that this really is a libtool archive.\r
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :\r
- else\r
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$ladir" = "X$lib" && ladir="."\r
-\r
- dlname=\r
- dlopen=\r
- dlpreopen=\r
- libdir=\r
- library_names=\r
- old_library=\r
- # If the library was installed with an old release of libtool,\r
- # it will not redefine variables installed, or shouldnotlink\r
- installed=yes\r
- shouldnotlink=no\r
- avoidtemprpath=\r
-\r
-\r
- # Read the .la file\r
- case $lib in\r
- */* | *\\*) . $lib ;;\r
- *) . ./$lib ;;\r
- esac\r
-\r
- if test "$linkmode,$pass" = "lib,link" ||\r
- test "$linkmode,$pass" = "prog,scan" ||\r
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then\r
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"\r
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"\r
- fi\r
-\r
- if test "$pass" = conv; then\r
- # Only check for convenience libraries\r
- deplibs="$lib $deplibs"\r
- if test -z "$libdir"; then\r
- if test -z "$old_library"; then\r
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- # It is a libtool convenience library, so add in its objects.\r
- convenience="$convenience $ladir/$objdir/$old_library"\r
- old_convenience="$old_convenience $ladir/$objdir/$old_library"\r
- tmp_libs=\r
- for deplib in $dependency_libs; do\r
- deplibs="$deplib $deplibs"\r
- if test "X$duplicate_deps" = "Xyes" ; then\r
- case "$tmp_libs " in\r
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;\r
- esac\r
- fi\r
- tmp_libs="$tmp_libs $deplib"\r
- done\r
- elif test "$linkmode" != prog && test "$linkmode" != lib; then\r
- $echo "$modename: \`$lib' is not a convenience library" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- continue\r
- fi # $pass = conv\r
-\r
-\r
- # Get the name of the library we link against.\r
- linklib=\r
- for l in $old_library $library_names; do\r
- linklib="$l"\r
- done\r
- if test -z "$linklib"; then\r
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # This library was specified with -dlopen.\r
- if test "$pass" = dlopen; then\r
- if test -z "$libdir"; then\r
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- if test -z "$dlname" ||\r
- test "$dlopen_support" != yes ||\r
- test "$build_libtool_libs" = no; then\r
- # If there is no dlname, no dlopen support or we're linking\r
- # statically, we need to preload. We also need to preload any\r
- # dependent libraries so libltdl's deplib preloader doesn't\r
- # bomb out in the load deplibs phase.\r
- dlprefiles="$dlprefiles $lib $dependency_libs"\r
- else\r
- newdlfiles="$newdlfiles $lib"\r
- fi\r
- continue\r
- fi # $pass = dlopen\r
-\r
- # We need an absolute path.\r
- case $ladir in\r
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;\r
- *)\r
- abs_ladir=`cd "$ladir" && pwd`\r
- if test -z "$abs_ladir"; then\r
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2\r
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2\r
- abs_ladir="$ladir"\r
- fi\r
- ;;\r
- esac\r
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`\r
-\r
- # Find the relevant object directory and library name.\r
- if test "X$installed" = Xyes; then\r
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then\r
- $echo "$modename: warning: library \`$lib' was moved." 1>&2\r
- dir="$ladir"\r
- absdir="$abs_ladir"\r
- libdir="$abs_ladir"\r
- else\r
- dir="$libdir"\r
- absdir="$libdir"\r
- fi\r
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes\r
- else\r
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then\r
- dir="$ladir"\r
- absdir="$abs_ladir"\r
- # Remove this search path later\r
- notinst_path="$notinst_path $abs_ladir"\r
- else\r
- dir="$ladir/$objdir"\r
- absdir="$abs_ladir/$objdir"\r
- # Remove this search path later\r
- notinst_path="$notinst_path $abs_ladir"\r
- fi\r
- fi # $installed = yes\r
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`\r
-\r
- # This library was specified with -dlpreopen.\r
- if test "$pass" = dlpreopen; then\r
- if test -z "$libdir"; then\r
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- # Prefer using a static library (so that no silly _DYNAMIC symbols\r
- # are required to link).\r
- if test -n "$old_library"; then\r
- newdlprefiles="$newdlprefiles $dir/$old_library"\r
- # Otherwise, use the dlname, so that lt_dlopen finds it.\r
- elif test -n "$dlname"; then\r
- newdlprefiles="$newdlprefiles $dir/$dlname"\r
- else\r
- newdlprefiles="$newdlprefiles $dir/$linklib"\r
- fi\r
- fi # $pass = dlpreopen\r
-\r
- if test -z "$libdir"; then\r
- # Link the convenience library\r
- if test "$linkmode" = lib; then\r
- deplibs="$dir/$old_library $deplibs"\r
- elif test "$linkmode,$pass" = "prog,link"; then\r
- compile_deplibs="$dir/$old_library $compile_deplibs"\r
- finalize_deplibs="$dir/$old_library $finalize_deplibs"\r
- else\r
- deplibs="$lib $deplibs" # used for prog,scan pass\r
- fi\r
- continue\r
- fi\r
-\r
-\r
- if test "$linkmode" = prog && test "$pass" != link; then\r
- newlib_search_path="$newlib_search_path $ladir"\r
- deplibs="$lib $deplibs"\r
-\r
- linkalldeplibs=no\r
- if test "$link_all_deplibs" != no || test -z "$library_names" ||\r
- test "$build_libtool_libs" = no; then\r
- linkalldeplibs=yes\r
- fi\r
-\r
- tmp_libs=\r
- for deplib in $dependency_libs; do\r
- case $deplib in\r
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test\r
- esac\r
- # Need to link against all dependency_libs?\r
- if test "$linkalldeplibs" = yes; then\r
- deplibs="$deplib $deplibs"\r
- else\r
- # Need to hardcode shared library paths\r
- # or/and link against static libraries\r
- newdependency_libs="$deplib $newdependency_libs"\r
- fi\r
- if test "X$duplicate_deps" = "Xyes" ; then\r
- case "$tmp_libs " in\r
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;\r
- esac\r
- fi\r
- tmp_libs="$tmp_libs $deplib"\r
- done # for deplib\r
- continue\r
- fi # $linkmode = prog...\r
-\r
- if test "$linkmode,$pass" = "prog,link"; then\r
- if test -n "$library_names" &&\r
- { { test "$prefer_static_libs" = no ||\r
- test "$prefer_static_libs,$installed" = "built,yes"; } ||\r
- test -z "$old_library"; }; then\r
- # We need to hardcode the library path\r
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then\r
- # Make sure the rpath contains only unique directories.\r
- case "$temp_rpath " in\r
- *" $dir "*) ;;\r
- *" $absdir "*) ;;\r
- *) temp_rpath="$temp_rpath $absdir" ;;\r
- esac\r
- fi\r
-\r
- # Hardcode the library path.\r
- # Skip directories that are in the system default run-time\r
- # search path.\r
- case " $sys_lib_dlsearch_path " in\r
- *" $absdir "*) ;;\r
- *)\r
- case "$compile_rpath " in\r
- *" $absdir "*) ;;\r
- *) compile_rpath="$compile_rpath $absdir"\r
- esac\r
- ;;\r
- esac\r
- case " $sys_lib_dlsearch_path " in\r
- *" $libdir "*) ;;\r
- *)\r
- case "$finalize_rpath " in\r
- *" $libdir "*) ;;\r
- *) finalize_rpath="$finalize_rpath $libdir"\r
- esac\r
- ;;\r
- esac\r
- fi # $linkmode,$pass = prog,link...\r
-\r
- if test "$alldeplibs" = yes &&\r
- { test "$deplibs_check_method" = pass_all ||\r
- { test "$build_libtool_libs" = yes &&\r
- test -n "$library_names"; }; }; then\r
- # We only need to search for static libraries\r
- continue\r
- fi\r
- fi\r
-\r
- link_static=no # Whether the deplib will be linked statically\r
- use_static_libs=$prefer_static_libs\r
- if test "$use_static_libs" = built && test "$installed" = yes ; then\r
- use_static_libs=no\r
- fi\r
- if test -n "$library_names" &&\r
- { test "$use_static_libs" = no || test -z "$old_library"; }; then\r
- if test "$installed" = no; then\r
- notinst_deplibs="$notinst_deplibs $lib"\r
- need_relink=yes\r
- fi\r
- # This is a shared library\r
-\r
- # Warn about portability, can't link against -module's on\r
- # some systems (darwin)\r
- if test "$shouldnotlink" = yes && test "$pass" = link ; then\r
- $echo\r
- if test "$linkmode" = prog; then\r
- $echo "*** Warning: Linking the executable $output against the loadable module"\r
- else\r
- $echo "*** Warning: Linking the shared library $output against the loadable module"\r
- fi\r
- $echo "*** $linklib is not portable!"\r
- fi\r
- if test "$linkmode" = lib &&\r
- test "$hardcode_into_libs" = yes; then\r
- # Hardcode the library path.\r
- # Skip directories that are in the system default run-time\r
- # search path.\r
- case " $sys_lib_dlsearch_path " in\r
- *" $absdir "*) ;;\r
- *)\r
- case "$compile_rpath " in\r
- *" $absdir "*) ;;\r
- *) compile_rpath="$compile_rpath $absdir"\r
- esac\r
- ;;\r
- esac\r
- case " $sys_lib_dlsearch_path " in\r
- *" $libdir "*) ;;\r
- *)\r
- case "$finalize_rpath " in\r
- *" $libdir "*) ;;\r
- *) finalize_rpath="$finalize_rpath $libdir"\r
- esac\r
- ;;\r
- esac\r
- fi\r
-\r
- if test -n "$old_archive_from_expsyms_cmds"; then\r
- # figure out the soname\r
- set dummy $library_names\r
- realname="$2"\r
- shift; shift\r
- libname=`eval \\$echo \"$libname_spec\"`\r
- # use dlname if we got it. it's perfectly good, no?\r
- if test -n "$dlname"; then\r
- soname="$dlname"\r
- elif test -n "$soname_spec"; then\r
- # bleh windows\r
- case $host in\r
- *cygwin* | mingw*)\r
- major=`expr $current - $age`\r
- versuffix="-$major"\r
- ;;\r
- esac\r
- eval soname=\"$soname_spec\"\r
- else\r
- soname="$realname"\r
- fi\r
-\r
- # Make a new name for the extract_expsyms_cmds to use\r
- soroot="$soname"\r
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`\r
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"\r
-\r
- # If the library has no export list, then create one now\r
- if test -f "$output_objdir/$soname-def"; then :\r
- else\r
- $show "extracting exported symbol list from \`$soname'"\r
- save_ifs="$IFS"; IFS='~'\r
- cmds=$extract_expsyms_cmds\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
- fi\r
-\r
- # Create $newlib\r
- if test -f "$output_objdir/$newlib"; then :; else\r
- $show "generating import library for \`$soname'"\r
- save_ifs="$IFS"; IFS='~'\r
- cmds=$old_archive_from_expsyms_cmds\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
- fi\r
- # make sure the library variables are pointing to the new library\r
- dir=$output_objdir\r
- linklib=$newlib\r
- fi # test -n "$old_archive_from_expsyms_cmds"\r
-\r
- if test "$linkmode" = prog || test "$mode" != relink; then\r
- add_shlibpath=\r
- add_dir=\r
- add=\r
- lib_linked=yes\r
- case $hardcode_action in\r
- immediate | unsupported)\r
- if test "$hardcode_direct" = no; then\r
- add="$dir/$linklib"\r
- case $host in\r
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;\r
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;\r
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \\r
- *-*-unixware7*) add_dir="-L$dir" ;;\r
- *-*-darwin* )\r
- # if the lib is a module then we can not link against\r
- # it, someone is ignoring the new warnings I added\r
- if /usr/bin/file -L $add 2> /dev/null |\r
- $EGREP ": [^:]* bundle" >/dev/null ; then\r
- $echo "** Warning, lib $linklib is a module, not a shared library"\r
- if test -z "$old_library" ; then\r
- $echo\r
- $echo "** And there doesn't seem to be a static archive available"\r
- $echo "** The link will probably fail, sorry"\r
- else\r
- add="$dir/$old_library"\r
- fi\r
- fi\r
- esac\r
- elif test "$hardcode_minus_L" = no; then\r
- case $host in\r
- *-*-sunos*) add_shlibpath="$dir" ;;\r
- esac\r
- add_dir="-L$dir"\r
- add="-l$name"\r
- elif test "$hardcode_shlibpath_var" = no; then\r
- add_shlibpath="$dir"\r
- add="-l$name"\r
- else\r
- lib_linked=no\r
- fi\r
- ;;\r
- relink)\r
- if test "$hardcode_direct" = yes; then\r
- add="$dir/$linklib"\r
- elif test "$hardcode_minus_L" = yes; then\r
- add_dir="-L$dir"\r
- # Try looking first in the location we're being installed to.\r
- if test -n "$inst_prefix_dir"; then\r
- case $libdir in\r
- [\\/]*)\r
- add_dir="$add_dir -L$inst_prefix_dir$libdir"\r
- ;;\r
- esac\r
- fi\r
- add="-l$name"\r
- elif test "$hardcode_shlibpath_var" = yes; then\r
- add_shlibpath="$dir"\r
- add="-l$name"\r
- else\r
- lib_linked=no\r
- fi\r
- ;;\r
- *) lib_linked=no ;;\r
- esac\r
-\r
- if test "$lib_linked" != yes; then\r
- $echo "$modename: configuration error: unsupported hardcode properties"\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test -n "$add_shlibpath"; then\r
- case :$compile_shlibpath: in\r
- *":$add_shlibpath:"*) ;;\r
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;\r
- esac\r
- fi\r
- if test "$linkmode" = prog; then\r
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"\r
- test -n "$add" && compile_deplibs="$add $compile_deplibs"\r
- else\r
- test -n "$add_dir" && deplibs="$add_dir $deplibs"\r
- test -n "$add" && deplibs="$add $deplibs"\r
- if test "$hardcode_direct" != yes && \\r
- test "$hardcode_minus_L" != yes && \\r
- test "$hardcode_shlibpath_var" = yes; then\r
- case :$finalize_shlibpath: in\r
- *":$libdir:"*) ;;\r
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;\r
- esac\r
- fi\r
- fi\r
- fi\r
-\r
- if test "$linkmode" = prog || test "$mode" = relink; then\r
- add_shlibpath=\r
- add_dir=\r
- add=\r
- # Finalize command for both is simple: just hardcode it.\r
- if test "$hardcode_direct" = yes; then\r
- add="$libdir/$linklib"\r
- elif test "$hardcode_minus_L" = yes; then\r
- add_dir="-L$libdir"\r
- add="-l$name"\r
- elif test "$hardcode_shlibpath_var" = yes; then\r
- case :$finalize_shlibpath: in\r
- *":$libdir:"*) ;;\r
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;\r
- esac\r
- add="-l$name"\r
- elif test "$hardcode_automatic" = yes; then\r
- if test -n "$inst_prefix_dir" &&\r
- test -f "$inst_prefix_dir$libdir/$linklib" ; then\r
- add="$inst_prefix_dir$libdir/$linklib"\r
- else\r
- add="$libdir/$linklib"\r
- fi\r
- else\r
- # We cannot seem to hardcode it, guess we'll fake it.\r
- add_dir="-L$libdir"\r
- # Try looking first in the location we're being installed to.\r
- if test -n "$inst_prefix_dir"; then\r
- case $libdir in\r
- [\\/]*)\r
- add_dir="$add_dir -L$inst_prefix_dir$libdir"\r
- ;;\r
- esac\r
- fi\r
- add="-l$name"\r
- fi\r
-\r
- if test "$linkmode" = prog; then\r
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"\r
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"\r
- else\r
- test -n "$add_dir" && deplibs="$add_dir $deplibs"\r
- test -n "$add" && deplibs="$add $deplibs"\r
- fi\r
- fi\r
- elif test "$linkmode" = prog; then\r
- # Here we assume that one of hardcode_direct or hardcode_minus_L\r
- # is not unsupported. This is valid on all known static and\r
- # shared platforms.\r
- if test "$hardcode_direct" != unsupported; then\r
- test -n "$old_library" && linklib="$old_library"\r
- compile_deplibs="$dir/$linklib $compile_deplibs"\r
- finalize_deplibs="$dir/$linklib $finalize_deplibs"\r
- else\r
- compile_deplibs="-l$name -L$dir $compile_deplibs"\r
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"\r
- fi\r
- elif test "$build_libtool_libs" = yes; then\r
- # Not a shared library\r
- if test "$deplibs_check_method" != pass_all; then\r
- # We're trying link a shared library against a static one\r
- # but the system doesn't support it.\r
-\r
- # Just print a warning and add the library to dependency_libs so\r
- # that the program can be linked against the static library.\r
- $echo\r
- $echo "*** Warning: This system can not link to static lib archive $lib."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which you do not appear to have."\r
- if test "$module" = yes; then\r
- $echo "*** But as you try to build a module library, libtool will still create "\r
- $echo "*** a static module, that should work as long as the dlopening application"\r
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."\r
- if test -z "$global_symbol_pipe"; then\r
- $echo\r
- $echo "*** However, this would only work if libtool was able to extract symbol"\r
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"\r
- $echo "*** not find such a program. So, this module is probably useless."\r
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."\r
- fi\r
- if test "$build_old_libs" = no; then\r
- build_libtool_libs=module\r
- build_old_libs=yes\r
- else\r
- build_libtool_libs=no\r
- fi\r
- fi\r
- else\r
- deplibs="$dir/$old_library $deplibs"\r
- link_static=yes\r
- fi\r
- fi # link shared/static library?\r
-\r
- if test "$linkmode" = lib; then\r
- if test -n "$dependency_libs" &&\r
- { test "$hardcode_into_libs" != yes ||\r
- test "$build_old_libs" = yes ||\r
- test "$link_static" = yes; }; then\r
- # Extract -R from dependency_libs\r
- temp_deplibs=\r
- for libdir in $dependency_libs; do\r
- case $libdir in\r
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`\r
- case " $xrpath " in\r
- *" $temp_xrpath "*) ;;\r
- *) xrpath="$xrpath $temp_xrpath";;\r
- esac;;\r
- *) temp_deplibs="$temp_deplibs $libdir";;\r
- esac\r
- done\r
- dependency_libs="$temp_deplibs"\r
- fi\r
-\r
- newlib_search_path="$newlib_search_path $absdir"\r
- # Link against this library\r
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"\r
- # ... and its dependency_libs\r
- tmp_libs=\r
- for deplib in $dependency_libs; do\r
- newdependency_libs="$deplib $newdependency_libs"\r
- if test "X$duplicate_deps" = "Xyes" ; then\r
- case "$tmp_libs " in\r
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;\r
- esac\r
- fi\r
- tmp_libs="$tmp_libs $deplib"\r
- done\r
-\r
- if test "$link_all_deplibs" != no; then\r
- # Add the search paths of all dependency libraries\r
- for deplib in $dependency_libs; do\r
- case $deplib in\r
- -L*) path="$deplib" ;;\r
- *.la)\r
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$dir" = "X$deplib" && dir="."\r
- # We need an absolute path.\r
- case $dir in\r
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;\r
- *)\r
- absdir=`cd "$dir" && pwd`\r
- if test -z "$absdir"; then\r
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2\r
- absdir="$dir"\r
- fi\r
- ;;\r
- esac\r
- if grep "^installed=no" $deplib > /dev/null; then\r
- path="$absdir/$objdir"\r
- else\r
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`\r
- if test -z "$libdir"; then\r
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- if test "$absdir" != "$libdir"; then\r
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2\r
- fi\r
- path="$absdir"\r
- fi\r
- depdepl=\r
- case $host in\r
- *-*-darwin*)\r
- # we do not want to link against static libs,\r
- # but need to link against shared\r
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`\r
- if test -n "$deplibrary_names" ; then\r
- for tmp in $deplibrary_names ; do\r
- depdepl=$tmp\r
- done\r
- if test -f "$path/$depdepl" ; then\r
- depdepl="$path/$depdepl"\r
- fi\r
- # do not add paths which are already there\r
- case " $newlib_search_path " in\r
- *" $path "*) ;;\r
- *) newlib_search_path="$newlib_search_path $path";;\r
- esac\r
- fi\r
- path=""\r
- ;;\r
- *)\r
- path="-L$path"\r
- ;;\r
- esac\r
- ;;\r
- -l*)\r
- case $host in\r
- *-*-darwin*)\r
- # Again, we only want to link against shared libraries\r
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`\r
- for tmp in $newlib_search_path ; do\r
- if test -f "$tmp/lib$tmp_libs.dylib" ; then\r
- eval depdepl="$tmp/lib$tmp_libs.dylib"\r
- break\r
- fi\r
- done\r
- path=""\r
- ;;\r
- *) continue ;;\r
- esac\r
- ;;\r
- *) continue ;;\r
- esac\r
- case " $deplibs " in\r
- *" $path "*) ;;\r
- *) deplibs="$path $deplibs" ;;\r
- esac\r
- case " $deplibs " in\r
- *" $depdepl "*) ;;\r
- *) deplibs="$depdepl $deplibs" ;;\r
- esac\r
- done\r
- fi # link_all_deplibs != no\r
- fi # linkmode = lib\r
- done # for deplib in $libs\r
- dependency_libs="$newdependency_libs"\r
- if test "$pass" = dlpreopen; then\r
- # Link the dlpreopened libraries before other libraries\r
- for deplib in $save_deplibs; do\r
- deplibs="$deplib $deplibs"\r
- done\r
- fi\r
- if test "$pass" != dlopen; then\r
- if test "$pass" != conv; then\r
- # Make sure lib_search_path contains only unique directories.\r
- lib_search_path=\r
- for dir in $newlib_search_path; do\r
- case "$lib_search_path " in\r
- *" $dir "*) ;;\r
- *) lib_search_path="$lib_search_path $dir" ;;\r
- esac\r
- done\r
- newlib_search_path=\r
- fi\r
-\r
- if test "$linkmode,$pass" != "prog,link"; then\r
- vars="deplibs"\r
- else\r
- vars="compile_deplibs finalize_deplibs"\r
- fi\r
- for var in $vars dependency_libs; do\r
- # Add libraries to $var in reverse order\r
- eval tmp_libs=\"\$$var\"\r
- new_libs=\r
- for deplib in $tmp_libs; do\r
- # FIXME: Pedantically, this is the right thing to do, so\r
- # that some nasty dependency loop isn't accidentally\r
- # broken:\r
- #new_libs="$deplib $new_libs"\r
- # Pragmatically, this seems to cause very few problems in\r
- # practice:\r
- case $deplib in\r
- -L*) new_libs="$deplib $new_libs" ;;\r
- -R*) ;;\r
- *)\r
- # And here is the reason: when a library appears more\r
- # than once as an explicit dependence of a library, or\r
- # is implicitly linked in more than once by the\r
- # compiler, it is considered special, and multiple\r
- # occurrences thereof are not removed. Compare this\r
- # with having the same library being listed as a\r
- # dependency of multiple other libraries: in this case,\r
- # we know (pedantically, we assume) the library does not\r
- # need to be listed more than once, so we keep only the\r
- # last copy. This is not always right, but it is rare\r
- # enough that we require users that really mean to play\r
- # such unportable linking tricks to link the library\r
- # using -Wl,-lname, so that libtool does not consider it\r
- # for duplicate removal.\r
- case " $specialdeplibs " in\r
- *" $deplib "*) new_libs="$deplib $new_libs" ;;\r
- *)\r
- case " $new_libs " in\r
- *" $deplib "*) ;;\r
- *) new_libs="$deplib $new_libs" ;;\r
- esac\r
- ;;\r
- esac\r
- ;;\r
- esac\r
- done\r
- tmp_libs=\r
- for deplib in $new_libs; do\r
- case $deplib in\r
- -L*)\r
- case " $tmp_libs " in\r
- *" $deplib "*) ;;\r
- *) tmp_libs="$tmp_libs $deplib" ;;\r
- esac\r
- ;;\r
- *) tmp_libs="$tmp_libs $deplib" ;;\r
- esac\r
- done\r
- eval $var=\"$tmp_libs\"\r
- done # for var\r
- fi\r
- # Last step: remove runtime libs from dependency_libs\r
- # (they stay in deplibs)\r
- tmp_libs=\r
- for i in $dependency_libs ; do\r
- case " $predeps $postdeps $compiler_lib_search_path " in\r
- *" $i "*)\r
- i=""\r
- ;;\r
- esac\r
- if test -n "$i" ; then\r
- tmp_libs="$tmp_libs $i"\r
- fi\r
- done\r
- dependency_libs=$tmp_libs\r
- done # for pass\r
- if test "$linkmode" = prog; then\r
- dlfiles="$newdlfiles"\r
- dlprefiles="$newdlprefiles"\r
- fi\r
-\r
- case $linkmode in\r
- oldlib)\r
- if test -n "$deplibs"; then\r
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then\r
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$rpath"; then\r
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$xrpath"; then\r
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$vinfo"; then\r
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$release"; then\r
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2\r
- fi\r
-\r
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then\r
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2\r
- fi\r
-\r
- # Now set the variables for building old libraries.\r
- build_libtool_libs=no\r
- oldlibs="$output"\r
- objs="$objs$old_deplibs"\r
- ;;\r
-\r
- lib)\r
- # Make sure we only generate libraries of the form `libNAME.la'.\r
- case $outputname in\r
- lib*)\r
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`\r
- eval shared_ext=\"$shrext_cmds\"\r
- eval libname=\"$libname_spec\"\r
- ;;\r
- *)\r
- if test "$module" = no; then\r
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- if test "$need_lib_prefix" != no; then\r
- # Add the "lib" prefix for modules if required\r
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`\r
- eval shared_ext=\"$shrext_cmds\"\r
- eval libname=\"$libname_spec\"\r
- else\r
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`\r
- fi\r
- ;;\r
- esac\r
-\r
- if test -n "$objs"; then\r
- if test "$deplibs_check_method" != pass_all; then\r
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1\r
- exit $EXIT_FAILURE\r
- else\r
- $echo\r
- $echo "*** Warning: Linking the shared library $output against the non-libtool"\r
- $echo "*** objects $objs is not portable!"\r
- libobjs="$libobjs $objs"\r
- fi\r
- fi\r
-\r
- if test "$dlself" != no; then\r
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2\r
- fi\r
-\r
- set dummy $rpath\r
- if test "$#" -gt 2; then\r
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2\r
- fi\r
- install_libdir="$2"\r
-\r
- oldlibs=\r
- if test -z "$rpath"; then\r
- if test "$build_libtool_libs" = yes; then\r
- # Building a libtool convenience library.\r
- # Some compilers have problems with a `.al' extension so\r
- # convenience libraries should have the same extension an\r
- # archive normally would.\r
- oldlibs="$output_objdir/$libname.$libext $oldlibs"\r
- build_libtool_libs=convenience\r
- build_old_libs=yes\r
- fi\r
-\r
- if test -n "$vinfo"; then\r
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2\r
- fi\r
-\r
- if test -n "$release"; then\r
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2\r
- fi\r
- else\r
-\r
- # Parse the version information argument.\r
- save_ifs="$IFS"; IFS=':'\r
- set dummy $vinfo 0 0 0\r
- IFS="$save_ifs"\r
-\r
- if test -n "$8"; then\r
- $echo "$modename: too many parameters to \`-version-info'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # convert absolute version numbers to libtool ages\r
- # this retains compatibility with .la files and attempts\r
- # to make the code below a bit more comprehensible\r
-\r
- case $vinfo_number in\r
- yes)\r
- number_major="$2"\r
- number_minor="$3"\r
- number_revision="$4"\r
- #\r
- # There are really only two kinds -- those that\r
- # use the current revision as the major version\r
- # and those that subtract age and use age as\r
- # a minor version. But, then there is irix\r
- # which has an extra 1 added just for fun\r
- #\r
- case $version_type in\r
- darwin|linux|osf|windows|none)\r
- current=`expr $number_major + $number_minor`\r
- age="$number_minor"\r
- revision="$number_revision"\r
- ;;\r
- freebsd-aout|freebsd-elf|sunos)\r
- current="$number_major"\r
- revision="$number_minor"\r
- age="0"\r
- ;;\r
- irix|nonstopux)\r
- current=`expr $number_major + $number_minor - 1`\r
- age="$number_minor"\r
- revision="$number_minor"\r
- ;;\r
- esac\r
- ;;\r
- no)\r
- current="$2"\r
- revision="$3"\r
- age="$4"\r
- ;;\r
- esac\r
-\r
- # Check that each of the things are valid numbers.\r
- case $current in\r
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;\r
- *)\r
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2\r
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- case $revision in\r
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;\r
- *)\r
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2\r
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- case $age in\r
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;\r
- *)\r
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2\r
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- if test "$age" -gt "$current"; then\r
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2\r
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Calculate the version variables.\r
- major=\r
- versuffix=\r
- verstring=\r
- case $version_type in\r
- none) ;;\r
-\r
- darwin)\r
- # Like Linux, but with the current version available in\r
- # verstring for coding it into the library header\r
- major=.`expr $current - $age`\r
- versuffix="$major.$age.$revision"\r
- # Darwin ld doesn't like 0 for these options...\r
- minor_current=`expr $current + 1`\r
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"\r
- ;;\r
-\r
- freebsd-aout)\r
- major=".$current"\r
- versuffix=".$current.$revision";\r
- ;;\r
-\r
- freebsd-elf)\r
- major=".$current"\r
- versuffix=".$current";\r
- ;;\r
-\r
- irix | nonstopux)\r
- major=`expr $current - $age + 1`\r
-\r
- case $version_type in\r
- nonstopux) verstring_prefix=nonstopux ;;\r
- *) verstring_prefix=sgi ;;\r
- esac\r
- verstring="$verstring_prefix$major.$revision"\r
-\r
- # Add in all the interfaces that we are compatible with.\r
- loop=$revision\r
- while test "$loop" -ne 0; do\r
- iface=`expr $revision - $loop`\r
- loop=`expr $loop - 1`\r
- verstring="$verstring_prefix$major.$iface:$verstring"\r
- done\r
-\r
- # Before this point, $major must not contain `.'.\r
- major=.$major\r
- versuffix="$major.$revision"\r
- ;;\r
-\r
- linux)\r
- major=.`expr $current - $age`\r
- versuffix="$major.$age.$revision"\r
- ;;\r
-\r
- osf)\r
- major=.`expr $current - $age`\r
- versuffix=".$current.$age.$revision"\r
- verstring="$current.$age.$revision"\r
-\r
- # Add in all the interfaces that we are compatible with.\r
- loop=$age\r
- while test "$loop" -ne 0; do\r
- iface=`expr $current - $loop`\r
- loop=`expr $loop - 1`\r
- verstring="$verstring:${iface}.0"\r
- done\r
-\r
- # Make executables depend on our current version.\r
- verstring="$verstring:${current}.0"\r
- ;;\r
-\r
- sunos)\r
- major=".$current"\r
- versuffix=".$current.$revision"\r
- ;;\r
-\r
- windows)\r
- # Use '-' rather than '.', since we only want one\r
- # extension on DOS 8.3 filesystems.\r
- major=`expr $current - $age`\r
- versuffix="-$major"\r
- ;;\r
-\r
- *)\r
- $echo "$modename: unknown library version type \`$version_type'" 1>&2\r
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- # Clear the version info if we defaulted, and they specified a release.\r
- if test -z "$vinfo" && test -n "$release"; then\r
- major=\r
- case $version_type in\r
- darwin)\r
- # we can't check for "0.0" in archive_cmds due to quoting\r
- # problems, so we reset it completely\r
- verstring=\r
- ;;\r
- *)\r
- verstring="0.0"\r
- ;;\r
- esac\r
- if test "$need_version" = no; then\r
- versuffix=\r
- else\r
- versuffix=".0.0"\r
- fi\r
- fi\r
-\r
- # Remove version info from name if versioning should be avoided\r
- if test "$avoid_version" = yes && test "$need_version" = no; then\r
- major=\r
- versuffix=\r
- verstring=""\r
- fi\r
-\r
- # Check to see if the archive will have undefined symbols.\r
- if test "$allow_undefined" = yes; then\r
- if test "$allow_undefined_flag" = unsupported; then\r
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2\r
- build_libtool_libs=no\r
- build_old_libs=yes\r
- fi\r
- else\r
- # Don't allow undefined symbols.\r
- allow_undefined_flag="$no_undefined_flag"\r
- fi\r
- fi\r
-\r
- if test "$mode" != relink; then\r
- # Remove our outputs, but don't remove object files since they\r
- # may have been created when compiling PIC objects.\r
- removelist=\r
- tempremovelist=`$echo "$output_objdir/*"`\r
- for p in $tempremovelist; do\r
- case $p in\r
- *.$objext)\r
- ;;\r
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)\r
- if test "X$precious_files_regex" != "X"; then\r
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1\r
- then\r
- continue\r
- fi\r
- fi\r
- removelist="$removelist $p"\r
- ;;\r
- *) ;;\r
- esac\r
- done\r
- if test -n "$removelist"; then\r
- $show "${rm}r $removelist"\r
- $run ${rm}r $removelist\r
- fi\r
- fi\r
-\r
- # Now set the variables for building old libraries.\r
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then\r
- oldlibs="$oldlibs $output_objdir/$libname.$libext"\r
-\r
- # Transform .lo files to .o files.\r
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`\r
- fi\r
-\r
- # Eliminate all temporary directories.\r
-# for path in $notinst_path; do\r
-# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`\r
-# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`\r
-# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`\r
-# done\r
-\r
- if test -n "$xrpath"; then\r
- # If the user specified any rpath flags, then add them.\r
- temp_xrpath=\r
- for libdir in $xrpath; do\r
- temp_xrpath="$temp_xrpath -R$libdir"\r
- case "$finalize_rpath " in\r
- *" $libdir "*) ;;\r
- *) finalize_rpath="$finalize_rpath $libdir" ;;\r
- esac\r
- done\r
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then\r
- dependency_libs="$temp_xrpath $dependency_libs"\r
- fi\r
- fi\r
-\r
- # Make sure dlfiles contains only unique files that won't be dlpreopened\r
- old_dlfiles="$dlfiles"\r
- dlfiles=\r
- for lib in $old_dlfiles; do\r
- case " $dlprefiles $dlfiles " in\r
- *" $lib "*) ;;\r
- *) dlfiles="$dlfiles $lib" ;;\r
- esac\r
- done\r
-\r
- # Make sure dlprefiles contains only unique files\r
- old_dlprefiles="$dlprefiles"\r
- dlprefiles=\r
- for lib in $old_dlprefiles; do\r
- case "$dlprefiles " in\r
- *" $lib "*) ;;\r
- *) dlprefiles="$dlprefiles $lib" ;;\r
- esac\r
- done\r
-\r
- if test "$build_libtool_libs" = yes; then\r
- if test -n "$rpath"; then\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)\r
- # these systems don't actually have a c library (as such)!\r
- ;;\r
- *-*-rhapsody* | *-*-darwin1.[012])\r
- # Rhapsody C library is in the System framework\r
- deplibs="$deplibs -framework System"\r
- ;;\r
- *-*-netbsd*)\r
- # Don't link with libc until the a.out ld.so is fixed.\r
- ;;\r
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)\r
- # Do not include libc due to us having libc/libc_r.\r
- ;;\r
- *-*-sco3.2v5* | *-*-sco5v6*)\r
- # Causes problems with __ctype\r
- ;;\r
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)\r
- # Compiler inserts libc in the correct place for threads to work\r
- ;;\r
- *)\r
- # Add libc to deplibs on all other systems if necessary.\r
- if test "$build_libtool_need_lc" = "yes"; then\r
- deplibs="$deplibs -lc"\r
- fi\r
- ;;\r
- esac\r
- fi\r
-\r
- # Transform deplibs into only deplibs that can be linked in shared.\r
- name_save=$name\r
- libname_save=$libname\r
- release_save=$release\r
- versuffix_save=$versuffix\r
- major_save=$major\r
- # I'm not sure if I'm treating the release correctly. I think\r
- # release should show up in the -l (ie -lgmp5) so we don't want to\r
- # add it in twice. Is that correct?\r
- release=""\r
- versuffix=""\r
- major=""\r
- newdeplibs=\r
- droppeddeps=no\r
- case $deplibs_check_method in\r
- pass_all)\r
- # Don't check for shared/static. Everything works.\r
- # This might be a little naive. We might want to check\r
- # whether the library exists or not. But this is on\r
- # osf3 & osf4 and I'm not really sure... Just\r
- # implementing what was already the behavior.\r
- newdeplibs=$deplibs\r
- ;;\r
- test_compile)\r
- # This code stresses the "libraries are programs" paradigm to its\r
- # limits. Maybe even breaks it. We compile a program, linking it\r
- # against the deplibs as a proxy for the library. Then we can check\r
- # whether they linked in statically or dynamically with ldd.\r
- $rm conftest.c\r
- cat > conftest.c <<EOF\r
- int main() { return 0; }\r
-EOF\r
- $rm conftest\r
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then\r
- ldd_output=`ldd conftest`\r
- for i in $deplibs; do\r
- name=`expr $i : '-l\(.*\)'`\r
- # If $name is empty we are operating on a -L argument.\r
- if test "$name" != "" && test "$name" != "0"; then\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- case " $predeps $postdeps " in\r
- *" $i "*)\r
- newdeplibs="$newdeplibs $i"\r
- i=""\r
- ;;\r
- esac\r
- fi\r
- if test -n "$i" ; then\r
- libname=`eval \\$echo \"$libname_spec\"`\r
- deplib_matches=`eval \\$echo \"$library_names_spec\"`\r
- set dummy $deplib_matches\r
- deplib_match=$2\r
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then\r
- newdeplibs="$newdeplibs $i"\r
- else\r
- droppeddeps=yes\r
- $echo\r
- $echo "*** Warning: dynamic linker does not accept needed library $i."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which I believe you do not have"\r
- $echo "*** because a test_compile did reveal that the linker did not use it for"\r
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."\r
- fi\r
- fi\r
- else\r
- newdeplibs="$newdeplibs $i"\r
- fi\r
- done\r
- else\r
- # Error occurred in the first compile. Let's try to salvage\r
- # the situation: Compile a separate program for each library.\r
- for i in $deplibs; do\r
- name=`expr $i : '-l\(.*\)'`\r
- # If $name is empty we are operating on a -L argument.\r
- if test "$name" != "" && test "$name" != "0"; then\r
- $rm conftest\r
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then\r
- ldd_output=`ldd conftest`\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- case " $predeps $postdeps " in\r
- *" $i "*)\r
- newdeplibs="$newdeplibs $i"\r
- i=""\r
- ;;\r
- esac\r
- fi\r
- if test -n "$i" ; then\r
- libname=`eval \\$echo \"$libname_spec\"`\r
- deplib_matches=`eval \\$echo \"$library_names_spec\"`\r
- set dummy $deplib_matches\r
- deplib_match=$2\r
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then\r
- newdeplibs="$newdeplibs $i"\r
- else\r
- droppeddeps=yes\r
- $echo\r
- $echo "*** Warning: dynamic linker does not accept needed library $i."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which you do not appear to have"\r
- $echo "*** because a test_compile did reveal that the linker did not use this one"\r
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."\r
- fi\r
- fi\r
- else\r
- droppeddeps=yes\r
- $echo\r
- $echo "*** Warning! Library $i is needed by this library but I was not able to"\r
- $echo "*** make it link in! You will probably need to install it or some"\r
- $echo "*** library that it depends on before this library will be fully"\r
- $echo "*** functional. Installing it before continuing would be even better."\r
- fi\r
- else\r
- newdeplibs="$newdeplibs $i"\r
- fi\r
- done\r
- fi\r
- ;;\r
- file_magic*)\r
- set dummy $deplibs_check_method\r
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`\r
- for a_deplib in $deplibs; do\r
- name=`expr $a_deplib : '-l\(.*\)'`\r
- # If $name is empty we are operating on a -L argument.\r
- if test "$name" != "" && test "$name" != "0"; then\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- case " $predeps $postdeps " in\r
- *" $a_deplib "*)\r
- newdeplibs="$newdeplibs $a_deplib"\r
- a_deplib=""\r
- ;;\r
- esac\r
- fi\r
- if test -n "$a_deplib" ; then\r
- libname=`eval \\$echo \"$libname_spec\"`\r
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do\r
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`\r
- for potent_lib in $potential_libs; do\r
- # Follow soft links.\r
- if ls -lLd "$potent_lib" 2>/dev/null \\r
- | grep " -> " >/dev/null; then\r
- continue\r
- fi\r
- # The statement above tries to avoid entering an\r
- # endless loop below, in case of cyclic links.\r
- # We might still enter an endless loop, since a link\r
- # loop can be closed while we follow links,\r
- # but so what?\r
- potlib="$potent_lib"\r
- while test -h "$potlib" 2>/dev/null; do\r
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`\r
- case $potliblink in\r
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;\r
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;\r
- esac\r
- done\r
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \\r
- | ${SED} 10q \\r
- | $EGREP "$file_magic_regex" > /dev/null; then\r
- newdeplibs="$newdeplibs $a_deplib"\r
- a_deplib=""\r
- break 2\r
- fi\r
- done\r
- done\r
- fi\r
- if test -n "$a_deplib" ; then\r
- droppeddeps=yes\r
- $echo\r
- $echo "*** Warning: linker path does not have real file for library $a_deplib."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which you do not appear to have"\r
- $echo "*** because I did check the linker path looking for a file starting"\r
- if test -z "$potlib" ; then\r
- $echo "*** with $libname but no candidates were found. (...for file magic test)"\r
- else\r
- $echo "*** with $libname and none of the candidates passed a file format test"\r
- $echo "*** using a file magic. Last file checked: $potlib"\r
- fi\r
- fi\r
- else\r
- # Add a -L argument.\r
- newdeplibs="$newdeplibs $a_deplib"\r
- fi\r
- done # Gone through all deplibs.\r
- ;;\r
- match_pattern*)\r
- set dummy $deplibs_check_method\r
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`\r
- for a_deplib in $deplibs; do\r
- name=`expr $a_deplib : '-l\(.*\)'`\r
- # If $name is empty we are operating on a -L argument.\r
- if test -n "$name" && test "$name" != "0"; then\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- case " $predeps $postdeps " in\r
- *" $a_deplib "*)\r
- newdeplibs="$newdeplibs $a_deplib"\r
- a_deplib=""\r
- ;;\r
- esac\r
- fi\r
- if test -n "$a_deplib" ; then\r
- libname=`eval \\$echo \"$libname_spec\"`\r
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do\r
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`\r
- for potent_lib in $potential_libs; do\r
- potlib="$potent_lib" # see symlink-check above in file_magic test\r
- if eval $echo \"$potent_lib\" 2>/dev/null \\r
- | ${SED} 10q \\r
- | $EGREP "$match_pattern_regex" > /dev/null; then\r
- newdeplibs="$newdeplibs $a_deplib"\r
- a_deplib=""\r
- break 2\r
- fi\r
- done\r
- done\r
- fi\r
- if test -n "$a_deplib" ; then\r
- droppeddeps=yes\r
- $echo\r
- $echo "*** Warning: linker path does not have real file for library $a_deplib."\r
- $echo "*** I have the capability to make that library automatically link in when"\r
- $echo "*** you link to this library. But I can only do this if you have a"\r
- $echo "*** shared version of the library, which you do not appear to have"\r
- $echo "*** because I did check the linker path looking for a file starting"\r
- if test -z "$potlib" ; then\r
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"\r
- else\r
- $echo "*** with $libname and none of the candidates passed a file format test"\r
- $echo "*** using a regex pattern. Last file checked: $potlib"\r
- fi\r
- fi\r
- else\r
- # Add a -L argument.\r
- newdeplibs="$newdeplibs $a_deplib"\r
- fi\r
- done # Gone through all deplibs.\r
- ;;\r
- none | unknown | *)\r
- newdeplibs=""\r
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \\r
- -e 's/ -[LR][^ ]*//g'`\r
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then\r
- for i in $predeps $postdeps ; do\r
- # can't use Xsed below, because $i might contain '/'\r
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`\r
- done\r
- fi\r
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \\r
- | grep . >/dev/null; then\r
- $echo\r
- if test "X$deplibs_check_method" = "Xnone"; then\r
- $echo "*** Warning: inter-library dependencies are not supported in this platform."\r
- else\r
- $echo "*** Warning: inter-library dependencies are not known to be supported."\r
- fi\r
- $echo "*** All declared inter-library dependencies are being dropped."\r
- droppeddeps=yes\r
- fi\r
- ;;\r
- esac\r
- versuffix=$versuffix_save\r
- major=$major_save\r
- release=$release_save\r
- libname=$libname_save\r
- name=$name_save\r
-\r
- case $host in\r
- *-*-rhapsody* | *-*-darwin1.[012])\r
- # On Rhapsody replace the C library is the System framework\r
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`\r
- ;;\r
- esac\r
-\r
- if test "$droppeddeps" = yes; then\r
- if test "$module" = yes; then\r
- $echo\r
- $echo "*** Warning: libtool could not satisfy all declared inter-library"\r
- $echo "*** dependencies of module $libname. Therefore, libtool will create"\r
- $echo "*** a static module, that should work as long as the dlopening"\r
- $echo "*** application is linked with the -dlopen flag."\r
- if test -z "$global_symbol_pipe"; then\r
- $echo\r
- $echo "*** However, this would only work if libtool was able to extract symbol"\r
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"\r
- $echo "*** not find such a program. So, this module is probably useless."\r
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."\r
- fi\r
- if test "$build_old_libs" = no; then\r
- oldlibs="$output_objdir/$libname.$libext"\r
- build_libtool_libs=module\r
- build_old_libs=yes\r
- else\r
- build_libtool_libs=no\r
- fi\r
- else\r
- $echo "*** The inter-library dependencies that have been dropped here will be"\r
- $echo "*** automatically added whenever a program is linked with this library"\r
- $echo "*** or is declared to -dlopen it."\r
-\r
- if test "$allow_undefined" = no; then\r
- $echo\r
- $echo "*** Since this library must not contain undefined symbols,"\r
- $echo "*** because either the platform does not support them or"\r
- $echo "*** it was explicitly requested with -no-undefined,"\r
- $echo "*** libtool will only create a static version of it."\r
- if test "$build_old_libs" = no; then\r
- oldlibs="$output_objdir/$libname.$libext"\r
- build_libtool_libs=module\r
- build_old_libs=yes\r
- else\r
- build_libtool_libs=no\r
- fi\r
- fi\r
- fi\r
- fi\r
- # Done checking deplibs!\r
- deplibs=$newdeplibs\r
- fi\r
-\r
-\r
- # move library search paths that coincide with paths to not yet\r
- # installed libraries to the beginning of the library search list\r
- new_libs=\r
- for path in $notinst_path; do\r
- case " $new_libs " in\r
- *" -L$path/$objdir "*) ;;\r
- *)\r
- case " $deplibs " in\r
- *" -L$path/$objdir "*)\r
- new_libs="$new_libs -L$path/$objdir" ;;\r
- esac\r
- ;;\r
- esac\r
- done\r
- for deplib in $deplibs; do\r
- case $deplib in\r
- -L*)\r
- case " $new_libs " in\r
- *" $deplib "*) ;;\r
- *) new_libs="$new_libs $deplib" ;;\r
- esac\r
- ;;\r
- *) new_libs="$new_libs $deplib" ;;\r
- esac\r
- done\r
- deplibs="$new_libs"\r
-\r
-\r
- # All the library-specific variables (install_libdir is set above).\r
- library_names=\r
- old_library=\r
- dlname=\r
-\r
- # Test again, we may have decided not to build it any more\r
- if test "$build_libtool_libs" = yes; then\r
- if test "$hardcode_into_libs" = yes; then\r
- # Hardcode the library paths\r
- hardcode_libdirs=\r
- dep_rpath=\r
- rpath="$finalize_rpath"\r
- test "$mode" != relink && rpath="$compile_rpath$rpath"\r
- for libdir in $rpath; do\r
- if test -n "$hardcode_libdir_flag_spec"; then\r
- if test -n "$hardcode_libdir_separator"; then\r
- if test -z "$hardcode_libdirs"; then\r
- hardcode_libdirs="$libdir"\r
- else\r
- # Just accumulate the unique libdirs.\r
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in\r
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)\r
- ;;\r
- *)\r
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"\r
- ;;\r
- esac\r
- fi\r
- else\r
- eval flag=\"$hardcode_libdir_flag_spec\"\r
- dep_rpath="$dep_rpath $flag"\r
- fi\r
- elif test -n "$runpath_var"; then\r
- case "$perm_rpath " in\r
- *" $libdir "*) ;;\r
- *) perm_rpath="$perm_rpath $libdir" ;;\r
- esac\r
- fi\r
- done\r
- # Substitute the hardcoded libdirs into the rpath.\r
- if test -n "$hardcode_libdir_separator" &&\r
- test -n "$hardcode_libdirs"; then\r
- libdir="$hardcode_libdirs"\r
- if test -n "$hardcode_libdir_flag_spec_ld"; then\r
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"\r
- else\r
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"\r
- fi\r
- fi\r
- if test -n "$runpath_var" && test -n "$perm_rpath"; then\r
- # We should set the runpath_var.\r
- rpath=\r
- for dir in $perm_rpath; do\r
- rpath="$rpath$dir:"\r
- done\r
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"\r
- fi\r
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"\r
- fi\r
-\r
- shlibpath="$finalize_shlibpath"\r
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"\r
- if test -n "$shlibpath"; then\r
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"\r
- fi\r
-\r
- # Get the real and link names of the library.\r
- eval shared_ext=\"$shrext_cmds\"\r
- eval library_names=\"$library_names_spec\"\r
- set dummy $library_names\r
- realname="$2"\r
- shift; shift\r
-\r
- if test -n "$soname_spec"; then\r
- eval soname=\"$soname_spec\"\r
- else\r
- soname="$realname"\r
- fi\r
- if test -z "$dlname"; then\r
- dlname=$soname\r
- fi\r
-\r
- lib="$output_objdir/$realname"\r
- linknames=\r
- for link\r
- do\r
- linknames="$linknames $link"\r
- done\r
-\r
- # Use standard objects if they are pic\r
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`\r
-\r
- # Prepare the list of exported symbols\r
- if test -z "$export_symbols"; then\r
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then\r
- $show "generating symbol list for \`$libname.la'"\r
- export_symbols="$output_objdir/$libname.exp"\r
- $run $rm $export_symbols\r
- cmds=$export_symbols_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- if len=`expr "X$cmd" : ".*"` &&\r
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- skipped_export=false\r
- else\r
- # The command line is too long to execute in one step.\r
- $show "using reloadable object file for export list..."\r
- skipped_export=:\r
- # Break out early, otherwise skipped_export may be\r
- # set to false by a later but shorter cmd.\r
- break\r
- fi\r
- done\r
- IFS="$save_ifs"\r
- if test -n "$export_symbols_regex"; then\r
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""\r
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'\r
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""\r
- $run eval '$mv "${export_symbols}T" "$export_symbols"'\r
- fi\r
- fi\r
- fi\r
-\r
- if test -n "$export_symbols" && test -n "$include_expsyms"; then\r
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'\r
- fi\r
-\r
- tmp_deplibs=\r
- for test_deplib in $deplibs; do\r
- case " $convenience " in\r
- *" $test_deplib "*) ;;\r
- *)\r
- tmp_deplibs="$tmp_deplibs $test_deplib"\r
- ;;\r
- esac\r
- done\r
- deplibs="$tmp_deplibs"\r
-\r
- if test -n "$convenience"; then\r
- if test -n "$whole_archive_flag_spec"; then\r
- save_libobjs=$libobjs\r
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"\r
- else\r
- gentop="$output_objdir/${outputname}x"\r
- generated="$generated $gentop"\r
-\r
- func_extract_archives $gentop $convenience\r
- libobjs="$libobjs $func_extract_archives_result"\r
- fi\r
- fi\r
- \r
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then\r
- eval flag=\"$thread_safe_flag_spec\"\r
- linker_flags="$linker_flags $flag"\r
- fi\r
-\r
- # Make a backup of the uninstalled library when relinking\r
- if test "$mode" = relink; then\r
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?\r
- fi\r
-\r
- # Do each of the archive commands.\r
- if test "$module" = yes && test -n "$module_cmds" ; then\r
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then\r
- eval test_cmds=\"$module_expsym_cmds\"\r
- cmds=$module_expsym_cmds\r
- else\r
- eval test_cmds=\"$module_cmds\"\r
- cmds=$module_cmds\r
- fi\r
- else\r
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then\r
- eval test_cmds=\"$archive_expsym_cmds\"\r
- cmds=$archive_expsym_cmds\r
- else\r
- eval test_cmds=\"$archive_cmds\"\r
- cmds=$archive_cmds\r
- fi\r
- fi\r
-\r
- if test "X$skipped_export" != "X:" &&\r
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&\r
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then\r
- :\r
- else\r
- # The command line is too long to link in one step, link piecewise.\r
- $echo "creating reloadable object files..."\r
-\r
- # Save the value of $output and $libobjs because we want to\r
- # use them later. If we have whole_archive_flag_spec, we\r
- # want to use save_libobjs as it was before\r
- # whole_archive_flag_spec was expanded, because we can't\r
- # assume the linker understands whole_archive_flag_spec.\r
- # This may have to be revisited, in case too many\r
- # convenience libraries get linked in and end up exceeding\r
- # the spec.\r
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then\r
- save_libobjs=$libobjs\r
- fi\r
- save_output=$output\r
- output_la=`$echo "X$output" | $Xsed -e "$basename"`\r
-\r
- # Clear the reloadable object creation command queue and\r
- # initialize k to one.\r
- test_cmds=\r
- concat_cmds=\r
- objlist=\r
- delfiles=\r
- last_robj=\r
- k=1\r
- output=$output_objdir/$output_la-${k}.$objext\r
- # Loop over the list of objects to be linked.\r
- for obj in $save_libobjs\r
- do\r
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"\r
- if test "X$objlist" = X ||\r
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&\r
- test "$len" -le "$max_cmd_len"; }; then\r
- objlist="$objlist $obj"\r
- else\r
- # The command $test_cmds is almost too long, add a\r
- # command to the queue.\r
- if test "$k" -eq 1 ; then\r
- # The first file doesn't have a previous command to add.\r
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"\r
- else\r
- # All subsequent reloadable object files will link in\r
- # the last one created.\r
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"\r
- fi\r
- last_robj=$output_objdir/$output_la-${k}.$objext\r
- k=`expr $k + 1`\r
- output=$output_objdir/$output_la-${k}.$objext\r
- objlist=$obj\r
- len=1\r
- fi\r
- done\r
- # Handle the remaining objects by creating one last\r
- # reloadable object file. All subsequent reloadable object\r
- # files will link in the last one created.\r
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~\r
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"\r
-\r
- if ${skipped_export-false}; then\r
- $show "generating symbol list for \`$libname.la'"\r
- export_symbols="$output_objdir/$libname.exp"\r
- $run $rm $export_symbols\r
- libobjs=$output\r
- # Append the command to create the export file.\r
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"\r
- fi\r
-\r
- # Set up a command to remove the reloadable object files\r
- # after they are used.\r
- i=0\r
- while test "$i" -lt "$k"\r
- do\r
- i=`expr $i + 1`\r
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"\r
- done\r
-\r
- $echo "creating a temporary reloadable object file: $output"\r
-\r
- # Loop through the commands generated above and execute them.\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $concat_cmds; do\r
- IFS="$save_ifs"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
-\r
- libobjs=$output\r
- # Restore the value of output.\r
- output=$save_output\r
-\r
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then\r
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"\r
- fi\r
- # Expand the library linking commands again to reset the\r
- # value of $libobjs for piecewise linking.\r
-\r
- # Do each of the archive commands.\r
- if test "$module" = yes && test -n "$module_cmds" ; then\r
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then\r
- cmds=$module_expsym_cmds\r
- else\r
- cmds=$module_cmds\r
- fi\r
- else\r
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then\r
- cmds=$archive_expsym_cmds\r
- else\r
- cmds=$archive_cmds\r
- fi\r
- fi\r
-\r
- # Append the command to remove the reloadable object files\r
- # to the just-reset $cmds.\r
- eval cmds=\"\$cmds~\$rm $delfiles\"\r
- fi\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || {\r
- lt_exit=$?\r
-\r
- # Restore the uninstalled library and exit\r
- if test "$mode" = relink; then\r
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'\r
- fi\r
-\r
- exit $lt_exit\r
- }\r
- done\r
- IFS="$save_ifs"\r
-\r
- # Restore the uninstalled library and exit\r
- if test "$mode" = relink; then\r
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?\r
-\r
- if test -n "$convenience"; then\r
- if test -z "$whole_archive_flag_spec"; then\r
- $show "${rm}r $gentop"\r
- $run ${rm}r "$gentop"\r
- fi\r
- fi\r
-\r
- exit $EXIT_SUCCESS\r
- fi\r
-\r
- # Create links to the real library.\r
- for linkname in $linknames; do\r
- if test "$realname" != "$linkname"; then\r
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"\r
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?\r
- fi\r
- done\r
-\r
- # If -module or -export-dynamic was specified, set the dlname.\r
- if test "$module" = yes || test "$export_dynamic" = yes; then\r
- # On all known operating systems, these are identical.\r
- dlname="$soname"\r
- fi\r
- fi\r
- ;;\r
-\r
- obj)\r
- if test -n "$deplibs"; then\r
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2\r
- fi\r
-\r
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then\r
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2\r
- fi\r
-\r
- if test -n "$rpath"; then\r
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2\r
- fi\r
-\r
- if test -n "$xrpath"; then\r
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2\r
- fi\r
-\r
- if test -n "$vinfo"; then\r
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2\r
- fi\r
-\r
- if test -n "$release"; then\r
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2\r
- fi\r
-\r
- case $output in\r
- *.lo)\r
- if test -n "$objs$old_deplibs"; then\r
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- libobj="$output"\r
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`\r
- ;;\r
- *)\r
- libobj=\r
- obj="$output"\r
- ;;\r
- esac\r
-\r
- # Delete the old objects.\r
- $run $rm $obj $libobj\r
-\r
- # Objects from convenience libraries. This assumes\r
- # single-version convenience libraries. Whenever we create\r
- # different ones for PIC/non-PIC, this we'll have to duplicate\r
- # the extraction.\r
- reload_conv_objs=\r
- gentop=\r
- # reload_cmds runs $LD directly, so let us get rid of\r
- # -Wl from whole_archive_flag_spec and hope we can get by with\r
- # turning comma into space..\r
- wl=\r
-\r
- if test -n "$convenience"; then\r
- if test -n "$whole_archive_flag_spec"; then\r
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"\r
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`\r
- else\r
- gentop="$output_objdir/${obj}x"\r
- generated="$generated $gentop"\r
-\r
- func_extract_archives $gentop $convenience\r
- reload_conv_objs="$reload_objs $func_extract_archives_result"\r
- fi\r
- fi\r
-\r
- # Create the old-style object.\r
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test\r
-\r
- output="$obj"\r
- cmds=$reload_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
-\r
- # Exit if we aren't doing a library object file.\r
- if test -z "$libobj"; then\r
- if test -n "$gentop"; then\r
- $show "${rm}r $gentop"\r
- $run ${rm}r $gentop\r
- fi\r
-\r
- exit $EXIT_SUCCESS\r
- fi\r
-\r
- if test "$build_libtool_libs" != yes; then\r
- if test -n "$gentop"; then\r
- $show "${rm}r $gentop"\r
- $run ${rm}r $gentop\r
- fi\r
-\r
- # Create an invalid libtool object if no PIC, so that we don't\r
- # accidentally link it into a program.\r
- # $show "echo timestamp > $libobj"\r
- # $run eval "echo timestamp > $libobj" || exit $?\r
- exit $EXIT_SUCCESS\r
- fi\r
-\r
- if test -n "$pic_flag" || test "$pic_mode" != default; then\r
- # Only do commands if we really have different PIC objects.\r
- reload_objs="$libobjs $reload_conv_objs"\r
- output="$libobj"\r
- cmds=$reload_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
- fi\r
-\r
- if test -n "$gentop"; then\r
- $show "${rm}r $gentop"\r
- $run ${rm}r $gentop\r
- fi\r
-\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
- prog)\r
- case $host in\r
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;\r
- esac\r
- if test -n "$vinfo"; then\r
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2\r
- fi\r
-\r
- if test -n "$release"; then\r
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2\r
- fi\r
-\r
- if test "$preload" = yes; then\r
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&\r
- test "$dlopen_self_static" = unknown; then\r
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."\r
- fi\r
- fi\r
-\r
- case $host in\r
- *-*-rhapsody* | *-*-darwin1.[012])\r
- # On Rhapsody replace the C library is the System framework\r
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`\r
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`\r
- ;;\r
- esac\r
-\r
- case $host in\r
- *darwin*)\r
- # Don't allow lazy linking, it breaks C++ global constructors\r
- if test "$tagname" = CXX ; then\r
- compile_command="$compile_command ${wl}-bind_at_load"\r
- finalize_command="$finalize_command ${wl}-bind_at_load"\r
- fi\r
- ;;\r
- esac\r
-\r
-\r
- # move library search paths that coincide with paths to not yet\r
- # installed libraries to the beginning of the library search list\r
- new_libs=\r
- for path in $notinst_path; do\r
- case " $new_libs " in\r
- *" -L$path/$objdir "*) ;;\r
- *)\r
- case " $compile_deplibs " in\r
- *" -L$path/$objdir "*)\r
- new_libs="$new_libs -L$path/$objdir" ;;\r
- esac\r
- ;;\r
- esac\r
- done\r
- for deplib in $compile_deplibs; do\r
- case $deplib in\r
- -L*)\r
- case " $new_libs " in\r
- *" $deplib "*) ;;\r
- *) new_libs="$new_libs $deplib" ;;\r
- esac\r
- ;;\r
- *) new_libs="$new_libs $deplib" ;;\r
- esac\r
- done\r
- compile_deplibs="$new_libs"\r
-\r
-\r
- compile_command="$compile_command $compile_deplibs"\r
- finalize_command="$finalize_command $finalize_deplibs"\r
-\r
- if test -n "$rpath$xrpath"; then\r
- # If the user specified any rpath flags, then add them.\r
- for libdir in $rpath $xrpath; do\r
- # This is the magic to use -rpath.\r
- case "$finalize_rpath " in\r
- *" $libdir "*) ;;\r
- *) finalize_rpath="$finalize_rpath $libdir" ;;\r
- esac\r
- done\r
- fi\r
-\r
- # Now hardcode the library paths\r
- rpath=\r
- hardcode_libdirs=\r
- for libdir in $compile_rpath $finalize_rpath; do\r
- if test -n "$hardcode_libdir_flag_spec"; then\r
- if test -n "$hardcode_libdir_separator"; then\r
- if test -z "$hardcode_libdirs"; then\r
- hardcode_libdirs="$libdir"\r
- else\r
- # Just accumulate the unique libdirs.\r
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in\r
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)\r
- ;;\r
- *)\r
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"\r
- ;;\r
- esac\r
- fi\r
- else\r
- eval flag=\"$hardcode_libdir_flag_spec\"\r
- rpath="$rpath $flag"\r
- fi\r
- elif test -n "$runpath_var"; then\r
- case "$perm_rpath " in\r
- *" $libdir "*) ;;\r
- *) perm_rpath="$perm_rpath $libdir" ;;\r
- esac\r
- fi\r
- case $host in\r
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)\r
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`\r
- case :$dllsearchpath: in\r
- *":$libdir:"*) ;;\r
- *) dllsearchpath="$dllsearchpath:$libdir";;\r
- esac\r
- case :$dllsearchpath: in\r
- *":$testbindir:"*) ;;\r
- *) dllsearchpath="$dllsearchpath:$testbindir";;\r
- esac\r
- ;;\r
- esac\r
- done\r
- # Substitute the hardcoded libdirs into the rpath.\r
- if test -n "$hardcode_libdir_separator" &&\r
- test -n "$hardcode_libdirs"; then\r
- libdir="$hardcode_libdirs"\r
- eval rpath=\" $hardcode_libdir_flag_spec\"\r
- fi\r
- compile_rpath="$rpath"\r
-\r
- rpath=\r
- hardcode_libdirs=\r
- for libdir in $finalize_rpath; do\r
- if test -n "$hardcode_libdir_flag_spec"; then\r
- if test -n "$hardcode_libdir_separator"; then\r
- if test -z "$hardcode_libdirs"; then\r
- hardcode_libdirs="$libdir"\r
- else\r
- # Just accumulate the unique libdirs.\r
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in\r
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)\r
- ;;\r
- *)\r
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"\r
- ;;\r
- esac\r
- fi\r
- else\r
- eval flag=\"$hardcode_libdir_flag_spec\"\r
- rpath="$rpath $flag"\r
- fi\r
- elif test -n "$runpath_var"; then\r
- case "$finalize_perm_rpath " in\r
- *" $libdir "*) ;;\r
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;\r
- esac\r
- fi\r
- done\r
- # Substitute the hardcoded libdirs into the rpath.\r
- if test -n "$hardcode_libdir_separator" &&\r
- test -n "$hardcode_libdirs"; then\r
- libdir="$hardcode_libdirs"\r
- eval rpath=\" $hardcode_libdir_flag_spec\"\r
- fi\r
- finalize_rpath="$rpath"\r
-\r
- if test -n "$libobjs" && test "$build_old_libs" = yes; then\r
- # Transform all the library objects into standard objects.\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`\r
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`\r
- fi\r
-\r
- dlsyms=\r
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then\r
- if test -n "$NM" && test -n "$global_symbol_pipe"; then\r
- dlsyms="${outputname}S.c"\r
- else\r
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2\r
- fi\r
- fi\r
-\r
- if test -n "$dlsyms"; then\r
- case $dlsyms in\r
- "") ;;\r
- *.c)\r
- # Discover the nlist of each of the dlfiles.\r
- nlist="$output_objdir/${outputname}.nm"\r
-\r
- $show "$rm $nlist ${nlist}S ${nlist}T"\r
- $run $rm "$nlist" "${nlist}S" "${nlist}T"\r
-\r
- # Parse the name list into a source file.\r
- $show "creating $output_objdir/$dlsyms"\r
-\r
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\\r
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */\r
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */\r
-\r
-#ifdef __cplusplus\r
-extern \"C\" {\r
-#endif\r
-\r
-/* Prevent the only kind of declaration conflicts we can make. */\r
-#define lt_preloaded_symbols some_other_symbol\r
-\r
-/* External symbol declarations for the compiler. */\\r
-"\r
-\r
- if test "$dlself" = yes; then\r
- $show "generating symbol list for \`$output'"\r
-\r
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"\r
-\r
- # Add our own program objects to the symbol list.\r
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`\r
- for arg in $progfiles; do\r
- $show "extracting global C symbols from \`$arg'"\r
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"\r
- done\r
-\r
- if test -n "$exclude_expsyms"; then\r
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'\r
- $run eval '$mv "$nlist"T "$nlist"'\r
- fi\r
-\r
- if test -n "$export_symbols_regex"; then\r
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'\r
- $run eval '$mv "$nlist"T "$nlist"'\r
- fi\r
-\r
- # Prepare the list of exported symbols\r
- if test -z "$export_symbols"; then\r
- export_symbols="$output_objdir/$outputname.exp"\r
- $run $rm $export_symbols\r
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'\r
- case $host in\r
- *cygwin* | *mingw* )\r
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'\r
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'\r
- ;;\r
- esac\r
- else\r
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'\r
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'\r
- $run eval 'mv "$nlist"T "$nlist"'\r
- case $host in\r
- *cygwin* | *mingw* )\r
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'\r
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'\r
- ;;\r
- esac\r
- fi\r
- fi\r
-\r
- for arg in $dlprefiles; do\r
- $show "extracting global C symbols from \`$arg'"\r
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`\r
- $run eval '$echo ": $name " >> "$nlist"'\r
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"\r
- done\r
-\r
- if test -z "$run"; then\r
- # Make sure we have at least an empty file.\r
- test -f "$nlist" || : > "$nlist"\r
-\r
- if test -n "$exclude_expsyms"; then\r
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T\r
- $mv "$nlist"T "$nlist"\r
- fi\r
-\r
- # Try sorting and uniquifying the output.\r
- if grep -v "^: " < "$nlist" |\r
- if sort -k 3 </dev/null >/dev/null 2>&1; then\r
- sort -k 3\r
- else\r
- sort +2\r
- fi |\r
- uniq > "$nlist"S; then\r
- :\r
- else\r
- grep -v "^: " < "$nlist" > "$nlist"S\r
- fi\r
-\r
- if test -f "$nlist"S; then\r
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'\r
- else\r
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"\r
- fi\r
-\r
- $echo >> "$output_objdir/$dlsyms" "\\r
-\r
-#undef lt_preloaded_symbols\r
-\r
-#if defined (__STDC__) && __STDC__\r
-# define lt_ptr void *\r
-#else\r
-# define lt_ptr char *\r
-# define const\r
-#endif\r
-\r
-/* The mapping between symbol names and symbols. */\r
-"\r
-\r
- case $host in\r
- *cygwin* | *mingw* )\r
- $echo >> "$output_objdir/$dlsyms" "\\r
-/* DATA imports from DLLs on WIN32 can't be const, because\r
- runtime relocations are performed -- see ld's documentation\r
- on pseudo-relocs */\r
-struct {\r
-"\r
- ;;\r
- * )\r
- $echo >> "$output_objdir/$dlsyms" "\\r
-const struct {\r
-"\r
- ;;\r
- esac\r
-\r
-\r
- $echo >> "$output_objdir/$dlsyms" "\\r
- const char *name;\r
- lt_ptr address;\r
-}\r
-lt_preloaded_symbols[] =\r
-{\\r
-"\r
-\r
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"\r
-\r
- $echo >> "$output_objdir/$dlsyms" "\\r
- {0, (lt_ptr) 0}\r
-};\r
-\r
-/* This works around a problem in FreeBSD linker */\r
-#ifdef FREEBSD_WORKAROUND\r
-static const void *lt_preloaded_setup() {\r
- return lt_preloaded_symbols;\r
-}\r
-#endif\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\\r
-"\r
- fi\r
-\r
- pic_flag_for_symtable=\r
- case $host in\r
- # compiling the symbol table file with pic_flag works around\r
- # a FreeBSD bug that causes programs to crash when -lm is\r
- # linked before any other PIC object. But we must not use\r
- # pic_flag when linking with -static. The problem exists in\r
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.\r
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)\r
- case "$compile_command " in\r
- *" -static "*) ;;\r
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;\r
- esac;;\r
- *-*-hpux*)\r
- case "$compile_command " in\r
- *" -static "*) ;;\r
- *) pic_flag_for_symtable=" $pic_flag";;\r
- esac\r
- esac\r
-\r
- # Now compile the dynamic symbol file.\r
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"\r
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?\r
-\r
- # Clean up the generated files.\r
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"\r
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"\r
-\r
- # Transform the symbol file into the correct name.\r
- case $host in\r
- *cygwin* | *mingw* )\r
- if test -f "$output_objdir/${outputname}.def" ; then\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- else\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- fi\r
- ;;\r
- * )\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`\r
- ;;\r
- esac\r
- ;;\r
- *)\r
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
- else\r
- # We keep going just in case the user didn't refer to\r
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe\r
- # really was required.\r
-\r
- # Nullify the symbol file.\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`\r
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`\r
- fi\r
-\r
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then\r
- # Replace the output file specification.\r
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`\r
- link_command="$compile_command$compile_rpath"\r
-\r
- # We have no uninstalled library dependencies, so finalize right now.\r
- $show "$link_command"\r
- $run eval "$link_command"\r
- exit_status=$?\r
-\r
- # Delete the generated files.\r
- if test -n "$dlsyms"; then\r
- $show "$rm $output_objdir/${outputname}S.${objext}"\r
- $run $rm "$output_objdir/${outputname}S.${objext}"\r
- fi\r
-\r
- exit $exit_status\r
- fi\r
-\r
- if test -n "$shlibpath_var"; then\r
- # We should set the shlibpath_var\r
- rpath=\r
- for dir in $temp_rpath; do\r
- case $dir in\r
- [\\/]* | [A-Za-z]:[\\/]*)\r
- # Absolute path.\r
- rpath="$rpath$dir:"\r
- ;;\r
- *)\r
- # Relative path: add a thisdir entry.\r
- rpath="$rpath\$thisdir/$dir:"\r
- ;;\r
- esac\r
- done\r
- temp_rpath="$rpath"\r
- fi\r
-\r
- if test -n "$compile_shlibpath$finalize_shlibpath"; then\r
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"\r
- fi\r
- if test -n "$finalize_shlibpath"; then\r
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"\r
- fi\r
-\r
- compile_var=\r
- finalize_var=\r
- if test -n "$runpath_var"; then\r
- if test -n "$perm_rpath"; then\r
- # We should set the runpath_var.\r
- rpath=\r
- for dir in $perm_rpath; do\r
- rpath="$rpath$dir:"\r
- done\r
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "\r
- fi\r
- if test -n "$finalize_perm_rpath"; then\r
- # We should set the runpath_var.\r
- rpath=\r
- for dir in $finalize_perm_rpath; do\r
- rpath="$rpath$dir:"\r
- done\r
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "\r
- fi\r
- fi\r
-\r
- if test "$no_install" = yes; then\r
- # We don't need to create a wrapper script.\r
- link_command="$compile_var$compile_command$compile_rpath"\r
- # Replace the output file specification.\r
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`\r
- # Delete the old output file.\r
- $run $rm $output\r
- # Link the executable and exit\r
- $show "$link_command"\r
- $run eval "$link_command" || exit $?\r
- exit $EXIT_SUCCESS\r
- fi\r
-\r
- if test "$hardcode_action" = relink; then\r
- # Fast installation is not supported\r
- link_command="$compile_var$compile_command$compile_rpath"\r
- relink_command="$finalize_var$finalize_command$finalize_rpath"\r
-\r
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2\r
- $echo "$modename: \`$output' will be relinked during installation" 1>&2\r
- else\r
- if test "$fast_install" != no; then\r
- link_command="$finalize_var$compile_command$finalize_rpath"\r
- if test "$fast_install" = yes; then\r
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`\r
- else\r
- # fast_install is set to needless\r
- relink_command=\r
- fi\r
- else\r
- link_command="$compile_var$compile_command$compile_rpath"\r
- relink_command="$finalize_var$finalize_command$finalize_rpath"\r
- fi\r
- fi\r
-\r
- # Replace the output file specification.\r
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`\r
-\r
- # Delete the old output files.\r
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname\r
-\r
- $show "$link_command"\r
- $run eval "$link_command" || exit $?\r
-\r
- # Now create the wrapper script.\r
- $show "creating $output"\r
-\r
- # Quote the relink command for shipping.\r
- if test -n "$relink_command"; then\r
- # Preserve any variables that may affect compiler behavior\r
- for var in $variables_saved_for_relink; do\r
- if eval test -z \"\${$var+set}\"; then\r
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"\r
- elif eval var_value=\$$var; test -z "$var_value"; then\r
- relink_command="$var=; export $var; $relink_command"\r
- else\r
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`\r
- relink_command="$var=\"$var_value\"; export $var; $relink_command"\r
- fi\r
- done\r
- relink_command="(cd `pwd`; $relink_command)"\r
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`\r
- fi\r
-\r
- # Quote $echo for shipping.\r
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then\r
- case $progpath in\r
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;\r
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;\r
- esac\r
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`\r
- else\r
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`\r
- fi\r
-\r
- # Only actually do things if our run command is non-null.\r
- if test -z "$run"; then\r
- # win32 will think the script is a binary if it has\r
- # a .exe suffix, so we strip it off here.\r
- case $output in\r
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;\r
- esac\r
- # test for cygwin because mv fails w/o .exe extensions\r
- case $host in\r
- *cygwin*)\r
- exeext=.exe\r
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;\r
- *) exeext= ;;\r
- esac\r
- case $host in\r
- *cygwin* | *mingw* )\r
- output_name=`basename $output`\r
- output_path=`dirname $output`\r
- cwrappersource="$output_path/$objdir/lt-$output_name.c"\r
- cwrapper="$output_path/$output_name.exe"\r
- $rm $cwrappersource $cwrapper\r
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15\r
-\r
- cat > $cwrappersource <<EOF\r
-\r
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname\r
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP\r
-\r
- The $output program cannot be directly executed until all the libtool\r
- libraries that it depends on are installed.\r
-\r
- This wrapper executable should never be moved out of the build directory.\r
- If it is, it will not operate correctly.\r
-\r
- Currently, it simply execs the wrapper *script* "/bin/sh $output",\r
- but could eventually absorb all of the scripts functionality and\r
- exec $objdir/$outputname directly.\r
-*/\r
-EOF\r
- cat >> $cwrappersource<<"EOF"\r
-#include <stdio.h>\r
-#include <stdlib.h>\r
-#include <unistd.h>\r
-#include <malloc.h>\r
-#include <stdarg.h>\r
-#include <assert.h>\r
-#include <string.h>\r
-#include <ctype.h>\r
-#include <sys/stat.h>\r
-\r
-#if defined(PATH_MAX)\r
-# define LT_PATHMAX PATH_MAX\r
-#elif defined(MAXPATHLEN)\r
-# define LT_PATHMAX MAXPATHLEN\r
-#else\r
-# define LT_PATHMAX 1024\r
-#endif\r
-\r
-#ifndef DIR_SEPARATOR\r
-# define DIR_SEPARATOR '/'\r
-# define PATH_SEPARATOR ':'\r
-#endif\r
-\r
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \\r
- defined (__OS2__)\r
-# define HAVE_DOS_BASED_FILE_SYSTEM\r
-# ifndef DIR_SEPARATOR_2\r
-# define DIR_SEPARATOR_2 '\\'\r
-# endif\r
-# ifndef PATH_SEPARATOR_2\r
-# define PATH_SEPARATOR_2 ';'\r
-# endif\r
-#endif\r
-\r
-#ifndef DIR_SEPARATOR_2\r
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)\r
-#else /* DIR_SEPARATOR_2 */\r
-# define IS_DIR_SEPARATOR(ch) \\r
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))\r
-#endif /* DIR_SEPARATOR_2 */\r
-\r
-#ifndef PATH_SEPARATOR_2\r
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)\r
-#else /* PATH_SEPARATOR_2 */\r
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)\r
-#endif /* PATH_SEPARATOR_2 */\r
-\r
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))\r
-#define XFREE(stale) do { \\r
- if (stale) { free ((void *) stale); stale = 0; } \\r
-} while (0)\r
-\r
-/* -DDEBUG is fairly common in CFLAGS. */\r
-#undef DEBUG\r
-#if defined DEBUGWRAPPER\r
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)\r
-#else\r
-# define DEBUG(format, ...)\r
-#endif\r
-\r
-const char *program_name = NULL;\r
-\r
-void * xmalloc (size_t num);\r
-char * xstrdup (const char *string);\r
-const char * base_name (const char *name);\r
-char * find_executable(const char *wrapper);\r
-int check_executable(const char *path);\r
-char * strendzap(char *str, const char *pat);\r
-void lt_fatal (const char *message, ...);\r
-\r
-int\r
-main (int argc, char *argv[])\r
-{\r
- char **newargz;\r
- int i;\r
-\r
- program_name = (char *) xstrdup (base_name (argv[0]));\r
- DEBUG("(main) argv[0] : %s\n",argv[0]);\r
- DEBUG("(main) program_name : %s\n",program_name);\r
- newargz = XMALLOC(char *, argc+2);\r
-EOF\r
-\r
- cat >> $cwrappersource <<EOF\r
- newargz[0] = (char *) xstrdup("$SHELL");\r
-EOF\r
-\r
- cat >> $cwrappersource <<"EOF"\r
- newargz[1] = find_executable(argv[0]);\r
- if (newargz[1] == NULL)\r
- lt_fatal("Couldn't find %s", argv[0]);\r
- DEBUG("(main) found exe at : %s\n",newargz[1]);\r
- /* we know the script has the same name, without the .exe */\r
- /* so make sure newargz[1] doesn't end in .exe */\r
- strendzap(newargz[1],".exe");\r
- for (i = 1; i < argc; i++)\r
- newargz[i+1] = xstrdup(argv[i]);\r
- newargz[argc+1] = NULL;\r
-\r
- for (i=0; i<argc+1; i++)\r
- {\r
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);\r
- ;\r
- }\r
-\r
-EOF\r
-\r
- case $host_os in\r
- mingw*)\r
- cat >> $cwrappersource <<EOF\r
- execv("$SHELL",(char const **)newargz);\r
-EOF\r
- ;;\r
- *)\r
- cat >> $cwrappersource <<EOF\r
- execv("$SHELL",newargz);\r
-EOF\r
- ;;\r
- esac\r
-\r
- cat >> $cwrappersource <<"EOF"\r
- return 127;\r
-}\r
-\r
-void *\r
-xmalloc (size_t num)\r
-{\r
- void * p = (void *) malloc (num);\r
- if (!p)\r
- lt_fatal ("Memory exhausted");\r
-\r
- return p;\r
-}\r
-\r
-char *\r
-xstrdup (const char *string)\r
-{\r
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL\r
-;\r
-}\r
-\r
-const char *\r
-base_name (const char *name)\r
-{\r
- const char *base;\r
-\r
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)\r
- /* Skip over the disk name in MSDOS pathnames. */\r
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')\r
- name += 2;\r
-#endif\r
-\r
- for (base = name; *name; name++)\r
- if (IS_DIR_SEPARATOR (*name))\r
- base = name + 1;\r
- return base;\r
-}\r
-\r
-int\r
-check_executable(const char * path)\r
-{\r
- struct stat st;\r
-\r
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");\r
- if ((!path) || (!*path))\r
- return 0;\r
-\r
- if ((stat (path, &st) >= 0) &&\r
- (\r
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */\r
-#if defined (S_IXOTH)\r
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||\r
-#endif\r
-#if defined (S_IXGRP)\r
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||\r
-#endif\r
- ((st.st_mode & S_IXUSR) == S_IXUSR))\r
- )\r
- return 1;\r
- else\r
- return 0;\r
-}\r
-\r
-/* Searches for the full path of the wrapper. Returns\r
- newly allocated full path name if found, NULL otherwise */\r
-char *\r
-find_executable (const char* wrapper)\r
-{\r
- int has_slash = 0;\r
- const char* p;\r
- const char* p_next;\r
- /* static buffer for getcwd */\r
- char tmp[LT_PATHMAX + 1];\r
- int tmp_len;\r
- char* concat_name;\r
-\r
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");\r
-\r
- if ((wrapper == NULL) || (*wrapper == '\0'))\r
- return NULL;\r
-\r
- /* Absolute path? */\r
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)\r
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')\r
- {\r
- concat_name = xstrdup (wrapper);\r
- if (check_executable(concat_name))\r
- return concat_name;\r
- XFREE(concat_name);\r
- }\r
- else\r
- {\r
-#endif\r
- if (IS_DIR_SEPARATOR (wrapper[0]))\r
- {\r
- concat_name = xstrdup (wrapper);\r
- if (check_executable(concat_name))\r
- return concat_name;\r
- XFREE(concat_name);\r
- }\r
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)\r
- }\r
-#endif\r
-\r
- for (p = wrapper; *p; p++)\r
- if (*p == '/')\r
- {\r
- has_slash = 1;\r
- break;\r
- }\r
- if (!has_slash)\r
- {\r
- /* no slashes; search PATH */\r
- const char* path = getenv ("PATH");\r
- if (path != NULL)\r
- {\r
- for (p = path; *p; p = p_next)\r
- {\r
- const char* q;\r
- size_t p_len;\r
- for (q = p; *q; q++)\r
- if (IS_PATH_SEPARATOR(*q))\r
- break;\r
- p_len = q - p;\r
- p_next = (*q == '\0' ? q : q + 1);\r
- if (p_len == 0)\r
- {\r
- /* empty path: current directory */\r
- if (getcwd (tmp, LT_PATHMAX) == NULL)\r
- lt_fatal ("getcwd failed");\r
- tmp_len = strlen(tmp);\r
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);\r
- memcpy (concat_name, tmp, tmp_len);\r
- concat_name[tmp_len] = '/';\r
- strcpy (concat_name + tmp_len + 1, wrapper);\r
- }\r
- else\r
- {\r
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);\r
- memcpy (concat_name, p, p_len);\r
- concat_name[p_len] = '/';\r
- strcpy (concat_name + p_len + 1, wrapper);\r
- }\r
- if (check_executable(concat_name))\r
- return concat_name;\r
- XFREE(concat_name);\r
- }\r
- }\r
- /* not found in PATH; assume curdir */\r
- }\r
- /* Relative path | not found in path: prepend cwd */\r
- if (getcwd (tmp, LT_PATHMAX) == NULL)\r
- lt_fatal ("getcwd failed");\r
- tmp_len = strlen(tmp);\r
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);\r
- memcpy (concat_name, tmp, tmp_len);\r
- concat_name[tmp_len] = '/';\r
- strcpy (concat_name + tmp_len + 1, wrapper);\r
-\r
- if (check_executable(concat_name))\r
- return concat_name;\r
- XFREE(concat_name);\r
- return NULL;\r
-}\r
-\r
-char *\r
-strendzap(char *str, const char *pat)\r
-{\r
- size_t len, patlen;\r
-\r
- assert(str != NULL);\r
- assert(pat != NULL);\r
-\r
- len = strlen(str);\r
- patlen = strlen(pat);\r
-\r
- if (patlen <= len)\r
- {\r
- str += len - patlen;\r
- if (strcmp(str, pat) == 0)\r
- *str = '\0';\r
- }\r
- return str;\r
-}\r
-\r
-static void\r
-lt_error_core (int exit_status, const char * mode,\r
- const char * message, va_list ap)\r
-{\r
- fprintf (stderr, "%s: %s: ", program_name, mode);\r
- vfprintf (stderr, message, ap);\r
- fprintf (stderr, ".\n");\r
-\r
- if (exit_status >= 0)\r
- exit (exit_status);\r
-}\r
-\r
-void\r
-lt_fatal (const char *message, ...)\r
-{\r
- va_list ap;\r
- va_start (ap, message);\r
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);\r
- va_end (ap);\r
-}\r
-EOF\r
- # we should really use a build-platform specific compiler\r
- # here, but OTOH, the wrappers (shell script and this C one)\r
- # are only useful if you want to execute the "real" binary.\r
- # Since the "real" binary is built for $host, then this\r
- # wrapper might as well be built for $host, too.\r
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource\r
- ;;\r
- esac\r
- $rm $output\r
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15\r
-\r
- $echo > $output "\\r
-#! $SHELL\r
-\r
-# $output - temporary wrapper script for $objdir/$outputname\r
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP\r
-#\r
-# The $output program cannot be directly executed until all the libtool\r
-# libraries that it depends on are installed.\r
-#\r
-# This wrapper script should never be moved out of the build directory.\r
-# If it is, it will not operate correctly.\r
-\r
-# Sed substitution that helps us do robust quoting. It backslashifies\r
-# metacharacters that are still active within double-quoted strings.\r
-Xsed='${SED} -e 1s/^X//'\r
-sed_quote_subst='$sed_quote_subst'\r
-\r
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).\r
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then\r
- emulate sh\r
- NULLCMD=:\r
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which\r
- # is contrary to our usage. Disable this feature.\r
- alias -g '\${1+\"\$@\"}'='\"\$@\"'\r
- setopt NO_GLOB_SUBST\r
-else\r
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac\r
-fi\r
-\r
-# The HP-UX ksh and POSIX shell print the target directory to stdout\r
-# if CDPATH is set.\r
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH\r
-\r
-relink_command=\"$relink_command\"\r
-\r
-# This environment variable determines our operation mode.\r
-if test \"\$libtool_install_magic\" = \"$magic\"; then\r
- # install mode needs the following variable:\r
- notinst_deplibs='$notinst_deplibs'\r
-else\r
- # When we are sourced in execute mode, \$file and \$echo are already set.\r
- if test \"\$libtool_execute_magic\" != \"$magic\"; then\r
- echo=\"$qecho\"\r
- file=\"\$0\"\r
- # Make sure echo works.\r
- if test \"X\$1\" = X--no-reexec; then\r
- # Discard the --no-reexec flag, and continue.\r
- shift\r
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then\r
- # Yippee, \$echo works!\r
- :\r
- else\r
- # Restart under the correct shell, and then maybe \$echo will work.\r
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}\r
- fi\r
- fi\\r
-"\r
- $echo >> $output "\\r
-\r
- # Find the directory that this script lives in.\r
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`\r
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.\r
-\r
- # Follow symbolic links until we get to the real thisdir.\r
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`\r
- while test -n \"\$file\"; do\r
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`\r
-\r
- # If there was a directory component, then change thisdir.\r
- if test \"x\$destdir\" != \"x\$file\"; then\r
- case \"\$destdir\" in\r
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;\r
- *) thisdir=\"\$thisdir/\$destdir\" ;;\r
- esac\r
- fi\r
-\r
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`\r
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`\r
- done\r
-\r
- # Try to get the absolute directory name.\r
- absdir=\`cd \"\$thisdir\" && pwd\`\r
- test -n \"\$absdir\" && thisdir=\"\$absdir\"\r
-"\r
-\r
- if test "$fast_install" = yes; then\r
- $echo >> $output "\\r
- program=lt-'$outputname'$exeext\r
- progdir=\"\$thisdir/$objdir\"\r
-\r
- if test ! -f \"\$progdir/\$program\" || \\\r
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\\r
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then\r
-\r
- file=\"\$\$-\$program\"\r
-\r
- if test ! -d \"\$progdir\"; then\r
- $mkdir \"\$progdir\"\r
- else\r
- $rm \"\$progdir/\$file\"\r
- fi"\r
-\r
- $echo >> $output "\\r
-\r
- # relink executable if necessary\r
- if test -n \"\$relink_command\"; then\r
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :\r
- else\r
- $echo \"\$relink_command_output\" >&2\r
- $rm \"\$progdir/\$file\"\r
- exit $EXIT_FAILURE\r
- fi\r
- fi\r
-\r
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||\r
- { $rm \"\$progdir/\$program\";\r
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }\r
- $rm \"\$progdir/\$file\"\r
- fi"\r
- else\r
- $echo >> $output "\\r
- program='$outputname'\r
- progdir=\"\$thisdir/$objdir\"\r
-"\r
- fi\r
-\r
- $echo >> $output "\\r
-\r
- if test -f \"\$progdir/\$program\"; then"\r
-\r
- # Export our shlibpath_var if we have one.\r
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then\r
- $echo >> $output "\\r
- # Add our own library path to $shlibpath_var\r
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"\r
-\r
- # Some systems cannot cope with colon-terminated $shlibpath_var\r
- # The second colon is a workaround for a bug in BeOS R4 sed\r
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`\r
-\r
- export $shlibpath_var\r
-"\r
- fi\r
-\r
- # fixup the dll searchpath if we need to.\r
- if test -n "$dllsearchpath"; then\r
- $echo >> $output "\\r
- # Add the dll search path components to the executable PATH\r
- PATH=$dllsearchpath:\$PATH\r
-"\r
- fi\r
-\r
- $echo >> $output "\\r
- if test \"\$libtool_execute_magic\" != \"$magic\"; then\r
- # Run the actual program with our arguments.\r
-"\r
- case $host in\r
- # Backslashes separate directories on plain windows\r
- *-*-mingw | *-*-os2*)\r
- $echo >> $output "\\r
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}\r
-"\r
- ;;\r
-\r
- *)\r
- $echo >> $output "\\r
- exec \"\$progdir/\$program\" \${1+\"\$@\"}\r
-"\r
- ;;\r
- esac\r
- $echo >> $output "\\r
- \$echo \"\$0: cannot exec \$program \$*\"\r
- exit $EXIT_FAILURE\r
- fi\r
- else\r
- # The program doesn't exist.\r
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2\r
- \$echo \"This script is just a wrapper for \$program.\" 1>&2\r
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-fi\\r
-"\r
- chmod +x $output\r
- fi\r
- exit $EXIT_SUCCESS\r
- ;;\r
- esac\r
-\r
- # See if we need to build an old-fashioned archive.\r
- for oldlib in $oldlibs; do\r
-\r
- if test "$build_libtool_libs" = convenience; then\r
- oldobjs="$libobjs_save"\r
- addlibs="$convenience"\r
- build_libtool_libs=no\r
- else\r
- if test "$build_libtool_libs" = module; then\r
- oldobjs="$libobjs_save"\r
- build_libtool_libs=no\r
- else\r
- oldobjs="$old_deplibs $non_pic_objects"\r
- fi\r
- addlibs="$old_convenience"\r
- fi\r
-\r
- if test -n "$addlibs"; then\r
- gentop="$output_objdir/${outputname}x"\r
- generated="$generated $gentop"\r
-\r
- func_extract_archives $gentop $addlibs\r
- oldobjs="$oldobjs $func_extract_archives_result"\r
- fi\r
-\r
- # Do each command in the archive commands.\r
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then\r
- cmds=$old_archive_from_new_cmds\r
- else\r
- # POSIX demands no paths to be encoded in archives. We have\r
- # to avoid creating archives with duplicate basenames if we\r
- # might have to extract them afterwards, e.g., when creating a\r
- # static archive out of a convenience library, or when linking\r
- # the entirety of a libtool archive into another (currently\r
- # not supported by libtool).\r
- if (for obj in $oldobjs\r
- do\r
- $echo "X$obj" | $Xsed -e 's%^.*/%%'\r
- done | sort | sort -uc >/dev/null 2>&1); then\r
- :\r
- else\r
- $echo "copying selected object files to avoid basename conflicts..."\r
-\r
- if test -z "$gentop"; then\r
- gentop="$output_objdir/${outputname}x"\r
- generated="$generated $gentop"\r
-\r
- $show "${rm}r $gentop"\r
- $run ${rm}r "$gentop"\r
- $show "$mkdir $gentop"\r
- $run $mkdir "$gentop"\r
- exit_status=$?\r
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then\r
- exit $exit_status\r
- fi\r
- fi\r
-\r
- save_oldobjs=$oldobjs\r
- oldobjs=\r
- counter=1\r
- for obj in $save_oldobjs\r
- do\r
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`\r
- case " $oldobjs " in\r
- " ") oldobjs=$obj ;;\r
- *[\ /]"$objbase "*)\r
- while :; do\r
- # Make sure we don't pick an alternate name that also\r
- # overlaps.\r
- newobj=lt$counter-$objbase\r
- counter=`expr $counter + 1`\r
- case " $oldobjs " in\r
- *[\ /]"$newobj "*) ;;\r
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;\r
- esac\r
- done\r
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"\r
- $run ln "$obj" "$gentop/$newobj" ||\r
- $run cp "$obj" "$gentop/$newobj"\r
- oldobjs="$oldobjs $gentop/$newobj"\r
- ;;\r
- *) oldobjs="$oldobjs $obj" ;;\r
- esac\r
- done\r
- fi\r
-\r
- eval cmds=\"$old_archive_cmds\"\r
-\r
- if len=`expr "X$cmds" : ".*"` &&\r
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then\r
- cmds=$old_archive_cmds\r
- else\r
- # the command line is too long to link in one step, link in parts\r
- $echo "using piecewise archive linking..."\r
- save_RANLIB=$RANLIB\r
- RANLIB=:\r
- objlist=\r
- concat_cmds=\r
- save_oldobjs=$oldobjs\r
-\r
- # Is there a better way of finding the last object in the list?\r
- for obj in $save_oldobjs\r
- do\r
- last_oldobj=$obj\r
- done\r
- for obj in $save_oldobjs\r
- do\r
- oldobjs="$objlist $obj"\r
- objlist="$objlist $obj"\r
- eval test_cmds=\"$old_archive_cmds\"\r
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&\r
- test "$len" -le "$max_cmd_len"; then\r
- :\r
- else\r
- # the above command should be used before it gets too long\r
- oldobjs=$objlist\r
- if test "$obj" = "$last_oldobj" ; then\r
- RANLIB=$save_RANLIB\r
- fi\r
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~\r
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"\r
- objlist=\r
- fi\r
- done\r
- RANLIB=$save_RANLIB\r
- oldobjs=$objlist\r
- if test "X$oldobjs" = "X" ; then\r
- eval cmds=\"\$concat_cmds\"\r
- else\r
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"\r
- fi\r
- fi\r
- fi\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- eval cmd=\"$cmd\"\r
- IFS="$save_ifs"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
- done\r
-\r
- if test -n "$generated"; then\r
- $show "${rm}r$generated"\r
- $run ${rm}r$generated\r
- fi\r
-\r
- # Now create the libtool archive.\r
- case $output in\r
- *.la)\r
- old_library=\r
- test "$build_old_libs" = yes && old_library="$libname.$libext"\r
- $show "creating $output"\r
-\r
- # Preserve any variables that may affect compiler behavior\r
- for var in $variables_saved_for_relink; do\r
- if eval test -z \"\${$var+set}\"; then\r
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"\r
- elif eval var_value=\$$var; test -z "$var_value"; then\r
- relink_command="$var=; export $var; $relink_command"\r
- else\r
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`\r
- relink_command="$var=\"$var_value\"; export $var; $relink_command"\r
- fi\r
- done\r
- # Quote the link command for shipping.\r
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"\r
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`\r
- if test "$hardcode_automatic" = yes ; then\r
- relink_command=\r
- fi\r
-\r
-\r
- # Only create the output if not a dry run.\r
- if test -z "$run"; then\r
- for installed in no yes; do\r
- if test "$installed" = yes; then\r
- if test -z "$install_libdir"; then\r
- break\r
- fi\r
- output="$output_objdir/$outputname"i\r
- # Replace all uninstalled libtool libraries with the installed ones\r
- newdependency_libs=\r
- for deplib in $dependency_libs; do\r
- case $deplib in\r
- *.la)\r
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`\r
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`\r
- if test -z "$libdir"; then\r
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- newdependency_libs="$newdependency_libs $libdir/$name"\r
- ;;\r
- *) newdependency_libs="$newdependency_libs $deplib" ;;\r
- esac\r
- done\r
- dependency_libs="$newdependency_libs"\r
- newdlfiles=\r
- for lib in $dlfiles; do\r
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`\r
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`\r
- if test -z "$libdir"; then\r
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- newdlfiles="$newdlfiles $libdir/$name"\r
- done\r
- dlfiles="$newdlfiles"\r
- newdlprefiles=\r
- for lib in $dlprefiles; do\r
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`\r
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`\r
- if test -z "$libdir"; then\r
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- newdlprefiles="$newdlprefiles $libdir/$name"\r
- done\r
- dlprefiles="$newdlprefiles"\r
- else\r
- newdlfiles=\r
- for lib in $dlfiles; do\r
- case $lib in\r
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;\r
- *) abs=`pwd`"/$lib" ;;\r
- esac\r
- newdlfiles="$newdlfiles $abs"\r
- done\r
- dlfiles="$newdlfiles"\r
- newdlprefiles=\r
- for lib in $dlprefiles; do\r
- case $lib in\r
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;\r
- *) abs=`pwd`"/$lib" ;;\r
- esac\r
- newdlprefiles="$newdlprefiles $abs"\r
- done\r
- dlprefiles="$newdlprefiles"\r
- fi\r
- $rm $output\r
- # place dlname in correct position for cygwin\r
- tdlname=$dlname\r
- case $host,$output,$installed,$module,$dlname in\r
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;\r
- esac\r
- $echo > $output "\\r
-# $outputname - a libtool library file\r
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP\r
-#\r
-# Please DO NOT delete this file!\r
-# It is necessary for linking the library.\r
-\r
-# The name that we can dlopen(3).\r
-dlname='$tdlname'\r
-\r
-# Names of this library.\r
-library_names='$library_names'\r
-\r
-# The name of the static archive.\r
-old_library='$old_library'\r
-\r
-# Libraries that this one depends upon.\r
-dependency_libs='$dependency_libs'\r
-\r
-# Version information for $libname.\r
-current=$current\r
-age=$age\r
-revision=$revision\r
-\r
-# Is this an already installed library?\r
-installed=$installed\r
-\r
-# Should we warn about portability when linking against -modules?\r
-shouldnotlink=$module\r
-\r
-# Files to dlopen/dlpreopen\r
-dlopen='$dlfiles'\r
-dlpreopen='$dlprefiles'\r
-\r
-# Directory that this library needs to be installed in:\r
-libdir='$install_libdir'"\r
- if test "$installed" = no && test "$need_relink" = yes; then\r
- $echo >> $output "\\r
-relink_command=\"$relink_command\""\r
- fi\r
- done\r
- fi\r
-\r
- # Do a symbolic link so that the libtool archive can be found in\r
- # LD_LIBRARY_PATH before the program is installed.\r
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"\r
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?\r
- ;;\r
- esac\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
- # libtool install mode\r
- install)\r
- modename="$modename: install"\r
-\r
- # There may be an optional sh(1) argument at the beginning of\r
- # install_prog (especially on Windows NT).\r
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||\r
- # Allow the use of GNU shtool's install command.\r
- $echo "X$nonopt" | grep shtool > /dev/null; then\r
- # Aesthetically quote it.\r
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- install_prog="$arg "\r
- arg="$1"\r
- shift\r
- else\r
- install_prog=\r
- arg=$nonopt\r
- fi\r
-\r
- # The real first argument should be the name of the installation program.\r
- # Aesthetically quote it.\r
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- install_prog="$install_prog$arg"\r
-\r
- # We need to accept at least all the BSD install flags.\r
- dest=\r
- files=\r
- opts=\r
- prev=\r
- install_type=\r
- isdir=no\r
- stripme=\r
- for arg\r
- do\r
- if test -n "$dest"; then\r
- files="$files $dest"\r
- dest=$arg\r
- continue\r
- fi\r
-\r
- case $arg in\r
- -d) isdir=yes ;;\r
- -f) \r
- case " $install_prog " in\r
- *[\\\ /]cp\ *) ;;\r
- *) prev=$arg ;;\r
- esac\r
- ;;\r
- -g | -m | -o) prev=$arg ;;\r
- -s)\r
- stripme=" -s"\r
- continue\r
- ;;\r
- -*)\r
- ;;\r
- *)\r
- # If the previous option needed an argument, then skip it.\r
- if test -n "$prev"; then\r
- prev=\r
- else\r
- dest=$arg\r
- continue\r
- fi\r
- ;;\r
- esac\r
-\r
- # Aesthetically quote the argument.\r
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\r
- case $arg in\r
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")\r
- arg="\"$arg\""\r
- ;;\r
- esac\r
- install_prog="$install_prog $arg"\r
- done\r
-\r
- if test -z "$install_prog"; then\r
- $echo "$modename: you must specify an install program" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test -n "$prev"; then\r
- $echo "$modename: the \`$prev' option requires an argument" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test -z "$files"; then\r
- if test -z "$dest"; then\r
- $echo "$modename: no file or destination specified" 1>&2\r
- else\r
- $echo "$modename: you must specify a destination" 1>&2\r
- fi\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Strip any trailing slash from the destination.\r
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`\r
-\r
- # Check to see that the destination is a directory.\r
- test -d "$dest" && isdir=yes\r
- if test "$isdir" = yes; then\r
- destdir="$dest"\r
- destname=\r
- else\r
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$destdir" = "X$dest" && destdir=.\r
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`\r
-\r
- # Not a directory, so check to see that there is only one file specified.\r
- set dummy $files\r
- if test "$#" -gt 2; then\r
- $echo "$modename: \`$dest' is not a directory" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- fi\r
- case $destdir in\r
- [\\/]* | [A-Za-z]:[\\/]*) ;;\r
- *)\r
- for file in $files; do\r
- case $file in\r
- *.lo) ;;\r
- *)\r
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
- done\r
- ;;\r
- esac\r
-\r
- # This variable tells wrapper scripts just to set variables rather\r
- # than running their programs.\r
- libtool_install_magic="$magic"\r
-\r
- staticlibs=\r
- future_libdirs=\r
- current_libdirs=\r
- for file in $files; do\r
-\r
- # Do each installation.\r
- case $file in\r
- *.$libext)\r
- # Do the static libraries later.\r
- staticlibs="$staticlibs $file"\r
- ;;\r
-\r
- *.la)\r
- # Check to see that this really is a libtool archive.\r
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :\r
- else\r
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- library_names=\r
- old_library=\r
- relink_command=\r
- # If there is no directory component, then add one.\r
- case $file in\r
- */* | *\\*) . $file ;;\r
- *) . ./$file ;;\r
- esac\r
-\r
- # Add the libdir to current_libdirs if it is the destination.\r
- if test "X$destdir" = "X$libdir"; then\r
- case "$current_libdirs " in\r
- *" $libdir "*) ;;\r
- *) current_libdirs="$current_libdirs $libdir" ;;\r
- esac\r
- else\r
- # Note the libdir as a future libdir.\r
- case "$future_libdirs " in\r
- *" $libdir "*) ;;\r
- *) future_libdirs="$future_libdirs $libdir" ;;\r
- esac\r
- fi\r
-\r
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/\r
- test "X$dir" = "X$file/" && dir=\r
- dir="$dir$objdir"\r
-\r
- if test -n "$relink_command"; then\r
- # Determine the prefix the user has applied to our future dir.\r
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`\r
-\r
- # Don't allow the user to place us outside of our expected\r
- # location b/c this prevents finding dependent libraries that\r
- # are installed to the same prefix.\r
- # At present, this check doesn't affect windows .dll's that\r
- # are installed into $libdir/../bin (currently, that works fine)\r
- # but it's something to keep an eye on.\r
- if test "$inst_prefix_dir" = "$destdir"; then\r
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- if test -n "$inst_prefix_dir"; then\r
- # Stick the inst_prefix_dir data into the link command.\r
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`\r
- else\r
- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`\r
- fi\r
-\r
- $echo "$modename: warning: relinking \`$file'" 1>&2\r
- $show "$relink_command"\r
- if $run eval "$relink_command"; then :\r
- else\r
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- fi\r
-\r
- # See the names of the shared library.\r
- set dummy $library_names\r
- if test -n "$2"; then\r
- realname="$2"\r
- shift\r
- shift\r
-\r
- srcname="$realname"\r
- test -n "$relink_command" && srcname="$realname"T\r
-\r
- # Install the shared library and build the symlinks.\r
- $show "$install_prog $dir/$srcname $destdir/$realname"\r
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?\r
- if test -n "$stripme" && test -n "$striplib"; then\r
- $show "$striplib $destdir/$realname"\r
- $run eval "$striplib $destdir/$realname" || exit $?\r
- fi\r
-\r
- if test "$#" -gt 0; then\r
- # Delete the old symlinks, and create new ones.\r
- # Try `ln -sf' first, because the `ln' binary might depend on\r
- # the symlink we replace! Solaris /bin/ln does not understand -f,\r
- # so we also need to try rm && ln -s.\r
- for linkname\r
- do\r
- if test "$linkname" != "$realname"; then\r
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"\r
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"\r
- fi\r
- done\r
- fi\r
-\r
- # Do each command in the postinstall commands.\r
- lib="$destdir/$realname"\r
- cmds=$postinstall_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || {\r
- lt_exit=$?\r
-\r
- # Restore the uninstalled library and exit\r
- if test "$mode" = relink; then\r
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'\r
- fi\r
-\r
- exit $lt_exit\r
- }\r
- done\r
- IFS="$save_ifs"\r
- fi\r
-\r
- # Install the pseudo-library for information purposes.\r
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`\r
- instname="$dir/$name"i\r
- $show "$install_prog $instname $destdir/$name"\r
- $run eval "$install_prog $instname $destdir/$name" || exit $?\r
-\r
- # Maybe install the static library, too.\r
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"\r
- ;;\r
-\r
- *.lo)\r
- # Install (i.e. copy) a libtool object.\r
-\r
- # Figure out destination file name, if it wasn't already specified.\r
- if test -n "$destname"; then\r
- destfile="$destdir/$destname"\r
- else\r
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`\r
- destfile="$destdir/$destfile"\r
- fi\r
-\r
- # Deduce the name of the destination old-style object file.\r
- case $destfile in\r
- *.lo)\r
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`\r
- ;;\r
- *.$objext)\r
- staticdest="$destfile"\r
- destfile=\r
- ;;\r
- *)\r
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- # Install the libtool object if requested.\r
- if test -n "$destfile"; then\r
- $show "$install_prog $file $destfile"\r
- $run eval "$install_prog $file $destfile" || exit $?\r
- fi\r
-\r
- # Install the old object if enabled.\r
- if test "$build_old_libs" = yes; then\r
- # Deduce the name of the old-style object file.\r
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`\r
-\r
- $show "$install_prog $staticobj $staticdest"\r
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?\r
- fi\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
- *)\r
- # Figure out destination file name, if it wasn't already specified.\r
- if test -n "$destname"; then\r
- destfile="$destdir/$destname"\r
- else\r
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`\r
- destfile="$destdir/$destfile"\r
- fi\r
-\r
- # If the file is missing, and there is a .exe on the end, strip it\r
- # because it is most likely a libtool script we actually want to\r
- # install\r
- stripped_ext=""\r
- case $file in\r
- *.exe)\r
- if test ! -f "$file"; then\r
- file=`$echo $file|${SED} 's,.exe$,,'`\r
- stripped_ext=".exe"\r
- fi\r
- ;;\r
- esac\r
-\r
- # Do a test to see if this is really a libtool program.\r
- case $host in\r
- *cygwin*|*mingw*)\r
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`\r
- ;;\r
- *)\r
- wrapper=$file\r
- ;;\r
- esac\r
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then\r
- notinst_deplibs=\r
- relink_command=\r
-\r
- # Note that it is not necessary on cygwin/mingw to append a dot to\r
- # foo even if both foo and FILE.exe exist: automatic-append-.exe\r
- # behavior happens only for exec(3), not for open(2)! Also, sourcing\r
- # `FILE.' does not work on cygwin managed mounts.\r
- #\r
- # If there is no directory component, then add one.\r
- case $wrapper in\r
- */* | *\\*) . ${wrapper} ;;\r
- *) . ./${wrapper} ;;\r
- esac\r
-\r
- # Check the variables that should have been set.\r
- if test -z "$notinst_deplibs"; then\r
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- finalize=yes\r
- for lib in $notinst_deplibs; do\r
- # Check to see that each library is installed.\r
- libdir=\r
- if test -f "$lib"; then\r
- # If there is no directory component, then add one.\r
- case $lib in\r
- */* | *\\*) . $lib ;;\r
- *) . ./$lib ;;\r
- esac\r
- fi\r
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test\r
- if test -n "$libdir" && test ! -f "$libfile"; then\r
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2\r
- finalize=no\r
- fi\r
- done\r
-\r
- relink_command=\r
- # Note that it is not necessary on cygwin/mingw to append a dot to\r
- # foo even if both foo and FILE.exe exist: automatic-append-.exe\r
- # behavior happens only for exec(3), not for open(2)! Also, sourcing\r
- # `FILE.' does not work on cygwin managed mounts.\r
- #\r
- # If there is no directory component, then add one.\r
- case $wrapper in\r
- */* | *\\*) . ${wrapper} ;;\r
- *) . ./${wrapper} ;;\r
- esac\r
-\r
- outputname=\r
- if test "$fast_install" = no && test -n "$relink_command"; then\r
- if test "$finalize" = yes && test -z "$run"; then\r
- tmpdir=`func_mktempdir`\r
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`\r
- outputname="$tmpdir/$file"\r
- # Replace the output file specification.\r
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`\r
-\r
- $show "$relink_command"\r
- if $run eval "$relink_command"; then :\r
- else\r
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2\r
- ${rm}r "$tmpdir"\r
- continue\r
- fi\r
- file="$outputname"\r
- else\r
- $echo "$modename: warning: cannot relink \`$file'" 1>&2\r
- fi\r
- else\r
- # Install the binary that we compiled earlier.\r
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`\r
- fi\r
- fi\r
-\r
- # remove .exe since cygwin /usr/bin/install will append another\r
- # one anyway \r
- case $install_prog,$host in\r
- */usr/bin/install*,*cygwin*)\r
- case $file:$destfile in\r
- *.exe:*.exe)\r
- # this is ok\r
- ;;\r
- *.exe:*)\r
- destfile=$destfile.exe\r
- ;;\r
- *:*.exe)\r
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`\r
- ;;\r
- esac\r
- ;;\r
- esac\r
- $show "$install_prog$stripme $file $destfile"\r
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?\r
- test -n "$outputname" && ${rm}r "$tmpdir"\r
- ;;\r
- esac\r
- done\r
-\r
- for file in $staticlibs; do\r
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`\r
-\r
- # Set up the ranlib parameters.\r
- oldlib="$destdir/$name"\r
-\r
- $show "$install_prog $file $oldlib"\r
- $run eval "$install_prog \$file \$oldlib" || exit $?\r
-\r
- if test -n "$stripme" && test -n "$old_striplib"; then\r
- $show "$old_striplib $oldlib"\r
- $run eval "$old_striplib $oldlib" || exit $?\r
- fi\r
-\r
- # Do each command in the postinstall commands.\r
- cmds=$old_postinstall_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || exit $?\r
- done\r
- IFS="$save_ifs"\r
- done\r
-\r
- if test -n "$future_libdirs"; then\r
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2\r
- fi\r
-\r
- if test -n "$current_libdirs"; then\r
- # Maybe just do a dry run.\r
- test -n "$run" && current_libdirs=" -n$current_libdirs"\r
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'\r
- else\r
- exit $EXIT_SUCCESS\r
- fi\r
- ;;\r
-\r
- # libtool finish mode\r
- finish)\r
- modename="$modename: finish"\r
- libdirs="$nonopt"\r
- admincmds=\r
-\r
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then\r
- for dir\r
- do\r
- libdirs="$libdirs $dir"\r
- done\r
-\r
- for libdir in $libdirs; do\r
- if test -n "$finish_cmds"; then\r
- # Do each command in the finish commands.\r
- cmds=$finish_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd" || admincmds="$admincmds\r
- $cmd"\r
- done\r
- IFS="$save_ifs"\r
- fi\r
- if test -n "$finish_eval"; then\r
- # Do the single finish_eval.\r
- eval cmds=\"$finish_eval\"\r
- $run eval "$cmds" || admincmds="$admincmds\r
- $cmds"\r
- fi\r
- done\r
- fi\r
-\r
- # Exit here if they wanted silent mode.\r
- test "$show" = : && exit $EXIT_SUCCESS\r
-\r
- $echo "X----------------------------------------------------------------------" | $Xsed\r
- $echo "Libraries have been installed in:"\r
- for libdir in $libdirs; do\r
- $echo " $libdir"\r
- done\r
- $echo\r
- $echo "If you ever happen to want to link against installed libraries"\r
- $echo "in a given directory, LIBDIR, you must either use libtool, and"\r
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"\r
- $echo "flag during linking and do at least one of the following:"\r
- if test -n "$shlibpath_var"; then\r
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"\r
- $echo " during execution"\r
- fi\r
- if test -n "$runpath_var"; then\r
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"\r
- $echo " during linking"\r
- fi\r
- if test -n "$hardcode_libdir_flag_spec"; then\r
- libdir=LIBDIR\r
- eval flag=\"$hardcode_libdir_flag_spec\"\r
-\r
- $echo " - use the \`$flag' linker flag"\r
- fi\r
- if test -n "$admincmds"; then\r
- $echo " - have your system administrator run these commands:$admincmds"\r
- fi\r
- if test -f /etc/ld.so.conf; then\r
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"\r
- fi\r
- $echo\r
- $echo "See any operating system documentation about shared libraries for"\r
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."\r
- $echo "X----------------------------------------------------------------------" | $Xsed\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
- # libtool execute mode\r
- execute)\r
- modename="$modename: execute"\r
-\r
- # The first argument is the command name.\r
- cmd="$nonopt"\r
- if test -z "$cmd"; then\r
- $echo "$modename: you must specify a COMMAND" 1>&2\r
- $echo "$help"\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Handle -dlopen flags immediately.\r
- for file in $execute_dlfiles; do\r
- if test ! -f "$file"; then\r
- $echo "$modename: \`$file' is not a file" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- dir=\r
- case $file in\r
- *.la)\r
- # Check to see that this really is a libtool archive.\r
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :\r
- else\r
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- # Read the libtool library.\r
- dlname=\r
- library_names=\r
-\r
- # If there is no directory component, then add one.\r
- case $file in\r
- */* | *\\*) . $file ;;\r
- *) . ./$file ;;\r
- esac\r
-\r
- # Skip this library if it cannot be dlopened.\r
- if test -z "$dlname"; then\r
- # Warn if it was a shared library.\r
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"\r
- continue\r
- fi\r
-\r
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$dir" = "X$file" && dir=.\r
-\r
- if test -f "$dir/$objdir/$dlname"; then\r
- dir="$dir/$objdir"\r
- else\r
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
- ;;\r
-\r
- *.lo)\r
- # Just add the directory containing the .lo file.\r
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`\r
- test "X$dir" = "X$file" && dir=.\r
- ;;\r
-\r
- *)\r
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2\r
- continue\r
- ;;\r
- esac\r
-\r
- # Get the absolute pathname.\r
- absdir=`cd "$dir" && pwd`\r
- test -n "$absdir" && dir="$absdir"\r
-\r
- # Now add the directory to shlibpath_var.\r
- if eval "test -z \"\$$shlibpath_var\""; then\r
- eval "$shlibpath_var=\"\$dir\""\r
- else\r
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""\r
- fi\r
- done\r
-\r
- # This variable tells wrapper scripts just to set shlibpath_var\r
- # rather than running their programs.\r
- libtool_execute_magic="$magic"\r
-\r
- # Check if any of the arguments is a wrapper script.\r
- args=\r
- for file\r
- do\r
- case $file in\r
- -*) ;;\r
- *)\r
- # Do a test to see if this is really a libtool program.\r
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- # If there is no directory component, then add one.\r
- case $file in\r
- */* | *\\*) . $file ;;\r
- *) . ./$file ;;\r
- esac\r
-\r
- # Transform arg to wrapped name.\r
- file="$progdir/$program"\r
- fi\r
- ;;\r
- esac\r
- # Quote arguments (to preserve shell metacharacters).\r
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`\r
- args="$args \"$file\""\r
- done\r
-\r
- if test -z "$run"; then\r
- if test -n "$shlibpath_var"; then\r
- # Export the shlibpath_var.\r
- eval "export $shlibpath_var"\r
- fi\r
-\r
- # Restore saved environment variables\r
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES\r
- do\r
- eval "if test \"\${save_$lt_var+set}\" = set; then\r
- $lt_var=\$save_$lt_var; export $lt_var\r
- else\r
- $lt_unset $lt_var\r
- fi"\r
- done\r
-\r
-\r
- # Now prepare to actually exec the command.\r
- exec_cmd="\$cmd$args"\r
- else\r
- # Display what would be done.\r
- if test -n "$shlibpath_var"; then\r
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""\r
- $echo "export $shlibpath_var"\r
- fi\r
- $echo "$cmd$args"\r
- exit $EXIT_SUCCESS\r
- fi\r
- ;;\r
-\r
- # libtool clean and uninstall mode\r
- clean | uninstall)\r
- modename="$modename: $mode"\r
- rm="$nonopt"\r
- files=\r
- rmforce=\r
- exit_status=0\r
-\r
- # This variable tells wrapper scripts just to set variables rather\r
- # than running their programs.\r
- libtool_install_magic="$magic"\r
-\r
- for arg\r
- do\r
- case $arg in\r
- -f) rm="$rm $arg"; rmforce=yes ;;\r
- -*) rm="$rm $arg" ;;\r
- *) files="$files $arg" ;;\r
- esac\r
- done\r
-\r
- if test -z "$rm"; then\r
- $echo "$modename: you must specify an RM program" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-\r
- rmdirs=\r
-\r
- origobjdir="$objdir"\r
- for file in $files; do\r
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`\r
- if test "X$dir" = "X$file"; then\r
- dir=.\r
- objdir="$origobjdir"\r
- else\r
- objdir="$dir/$origobjdir"\r
- fi\r
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`\r
- test "$mode" = uninstall && objdir="$dir"\r
-\r
- # Remember objdir for removal later, being careful to avoid duplicates\r
- if test "$mode" = clean; then\r
- case " $rmdirs " in\r
- *" $objdir "*) ;;\r
- *) rmdirs="$rmdirs $objdir" ;;\r
- esac\r
- fi\r
-\r
- # Don't error if the file doesn't exist and rm -f was used.\r
- if (test -L "$file") >/dev/null 2>&1 \\r
- || (test -h "$file") >/dev/null 2>&1 \\r
- || test -f "$file"; then\r
- :\r
- elif test -d "$file"; then\r
- exit_status=1\r
- continue\r
- elif test "$rmforce" = yes; then\r
- continue\r
- fi\r
-\r
- rmfiles="$file"\r
-\r
- case $name in\r
- *.la)\r
- # Possibly a libtool archive, so verify it.\r
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- . $dir/$name\r
-\r
- # Delete the libtool libraries and symlinks.\r
- for n in $library_names; do\r
- rmfiles="$rmfiles $objdir/$n"\r
- done\r
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"\r
-\r
- case "$mode" in\r
- clean)\r
- case " $library_names " in\r
- # " " in the beginning catches empty $dlname\r
- *" $dlname "*) ;;\r
- *) rmfiles="$rmfiles $objdir/$dlname" ;;\r
- esac\r
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"\r
- ;;\r
- uninstall)\r
- if test -n "$library_names"; then\r
- # Do each command in the postuninstall commands.\r
- cmds=$postuninstall_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd"\r
- if test "$?" -ne 0 && test "$rmforce" != yes; then\r
- exit_status=1\r
- fi\r
- done\r
- IFS="$save_ifs"\r
- fi\r
-\r
- if test -n "$old_library"; then\r
- # Do each command in the old_postuninstall commands.\r
- cmds=$old_postuninstall_cmds\r
- save_ifs="$IFS"; IFS='~'\r
- for cmd in $cmds; do\r
- IFS="$save_ifs"\r
- eval cmd=\"$cmd\"\r
- $show "$cmd"\r
- $run eval "$cmd"\r
- if test "$?" -ne 0 && test "$rmforce" != yes; then\r
- exit_status=1\r
- fi\r
- done\r
- IFS="$save_ifs"\r
- fi\r
- # FIXME: should reinstall the best remaining shared library.\r
- ;;\r
- esac\r
- fi\r
- ;;\r
-\r
- *.lo)\r
- # Possibly a libtool object, so verify it.\r
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
-\r
- # Read the .lo file\r
- . $dir/$name\r
-\r
- # Add PIC object to the list of files to remove.\r
- if test -n "$pic_object" \\r
- && test "$pic_object" != none; then\r
- rmfiles="$rmfiles $dir/$pic_object"\r
- fi\r
-\r
- # Add non-PIC object to the list of files to remove.\r
- if test -n "$non_pic_object" \\r
- && test "$non_pic_object" != none; then\r
- rmfiles="$rmfiles $dir/$non_pic_object"\r
- fi\r
- fi\r
- ;;\r
-\r
- *)\r
- if test "$mode" = clean ; then\r
- noexename=$name\r
- case $file in\r
- *.exe)\r
- file=`$echo $file|${SED} 's,.exe$,,'`\r
- noexename=`$echo $name|${SED} 's,.exe$,,'`\r
- # $file with .exe has already been added to rmfiles,\r
- # add $file without .exe\r
- rmfiles="$rmfiles $file"\r
- ;;\r
- esac\r
- # Do a test to see if this is a libtool program.\r
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then\r
- relink_command=\r
- . $dir/$noexename\r
-\r
- # note $name still contains .exe if it was in $file originally\r
- # as does the version of $file that was added into $rmfiles\r
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"\r
- if test "$fast_install" = yes && test -n "$relink_command"; then\r
- rmfiles="$rmfiles $objdir/lt-$name"\r
- fi\r
- if test "X$noexename" != "X$name" ; then\r
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"\r
- fi\r
- fi\r
- fi\r
- ;;\r
- esac\r
- $show "$rm $rmfiles"\r
- $run $rm $rmfiles || exit_status=1\r
- done\r
- objdir="$origobjdir"\r
-\r
- # Try to remove the ${objdir}s in the directories where we deleted files\r
- for dir in $rmdirs; do\r
- if test -d "$dir"; then\r
- $show "rmdir $dir"\r
- $run rmdir $dir >/dev/null 2>&1\r
- fi\r
- done\r
-\r
- exit $exit_status\r
- ;;\r
-\r
- "")\r
- $echo "$modename: you must specify a MODE" 1>&2\r
- $echo "$generic_help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
- esac\r
-\r
- if test -z "$exec_cmd"; then\r
- $echo "$modename: invalid operation mode \`$mode'" 1>&2\r
- $echo "$generic_help" 1>&2\r
- exit $EXIT_FAILURE\r
- fi\r
-fi # test -z "$show_help"\r
-\r
-if test -n "$exec_cmd"; then\r
- eval exec $exec_cmd\r
- exit $EXIT_FAILURE\r
-fi\r
-\r
-# We need to display help for each of the modes.\r
-case $mode in\r
-"") $echo \\r
-"Usage: $modename [OPTION]... [MODE-ARG]...\r
-\r
-Provide generalized library-building support services.\r
-\r
- --config show all configuration variables\r
- --debug enable verbose shell tracing\r
--n, --dry-run display commands without modifying any files\r
- --features display basic configuration information and exit\r
- --finish same as \`--mode=finish'\r
- --help display this help message and exit\r
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]\r
- --quiet same as \`--silent'\r
- --silent don't print informational messages\r
- --tag=TAG use configuration variables from tag TAG\r
- --version print version information\r
-\r
-MODE must be one of the following:\r
-\r
- clean remove files from the build directory\r
- compile compile a source file into a libtool object\r
- execute automatically set library path, then run a program\r
- finish complete the installation of libtool libraries\r
- install install libraries or executables\r
- link create a library or an executable\r
- uninstall remove libraries from an installed directory\r
-\r
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for\r
-a more detailed description of MODE.\r
-\r
-Report bugs to <bug-libtool@gnu.org>."\r
- exit $EXIT_SUCCESS\r
- ;;\r
-\r
-clean)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...\r
-\r
-Remove files from the build directory.\r
-\r
-RM is the name of the program to use to delete files associated with each FILE\r
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed\r
-to RM.\r
-\r
-If FILE is a libtool library, object or program, all the files associated\r
-with it are deleted. Otherwise, only FILE itself is deleted using RM."\r
- ;;\r
-\r
-compile)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE\r
-\r
-Compile a source file into a libtool library object.\r
-\r
-This mode accepts the following additional options:\r
-\r
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE\r
- -prefer-pic try to building PIC objects only\r
- -prefer-non-pic try to building non-PIC objects only\r
- -static always build a \`.o' file suitable for static linking\r
-\r
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file\r
-from the given SOURCEFILE.\r
-\r
-The output file name is determined by removing the directory component from\r
-SOURCEFILE, then substituting the C source code suffix \`.c' with the\r
-library object suffix, \`.lo'."\r
- ;;\r
-\r
-execute)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...\r
-\r
-Automatically set library path, then run a program.\r
-\r
-This mode accepts the following additional options:\r
-\r
- -dlopen FILE add the directory containing FILE to the library path\r
-\r
-This mode sets the library path environment variable according to \`-dlopen'\r
-flags.\r
-\r
-If any of the ARGS are libtool executable wrappers, then they are translated\r
-into their corresponding uninstalled binary, and any of their required library\r
-directories are added to the library path.\r
-\r
-Then, COMMAND is executed, with ARGS as arguments."\r
- ;;\r
-\r
-finish)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...\r
-\r
-Complete the installation of libtool libraries.\r
-\r
-Each LIBDIR is a directory that contains libtool libraries.\r
-\r
-The commands that this mode executes may require superuser privileges. Use\r
-the \`--dry-run' option if you just want to see what would be executed."\r
- ;;\r
-\r
-install)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...\r
-\r
-Install executables or libraries.\r
-\r
-INSTALL-COMMAND is the installation command. The first component should be\r
-either the \`install' or \`cp' program.\r
-\r
-The rest of the components are interpreted as arguments to that command (only\r
-BSD-compatible install options are recognized)."\r
- ;;\r
-\r
-link)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...\r
-\r
-Link object files or libraries together to form another library, or to\r
-create an executable program.\r
-\r
-LINK-COMMAND is a command using the C compiler that you would use to create\r
-a program from several object files.\r
-\r
-The following components of LINK-COMMAND are treated specially:\r
-\r
- -all-static do not do any dynamic linking at all\r
- -avoid-version do not add a version suffix if possible\r
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime\r
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols\r
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)\r
- -export-symbols SYMFILE\r
- try to export only the symbols listed in SYMFILE\r
- -export-symbols-regex REGEX\r
- try to export only the symbols matching REGEX\r
- -LLIBDIR search LIBDIR for required installed libraries\r
- -lNAME OUTPUT-FILE requires the installed library libNAME\r
- -module build a library that can dlopened\r
- -no-fast-install disable the fast-install mode\r
- -no-install link a not-installable executable\r
- -no-undefined declare that a library does not refer to external symbols\r
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects\r
- -objectlist FILE Use a list of object files found in FILE to specify objects\r
- -precious-files-regex REGEX\r
- don't remove output files matching REGEX\r
- -release RELEASE specify package release information\r
- -rpath LIBDIR the created library will eventually be installed in LIBDIR\r
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries\r
- -static do not do any dynamic linking of uninstalled libtool libraries\r
- -static-libtool-libs\r
- do not do any dynamic linking of libtool libraries\r
- -version-info CURRENT[:REVISION[:AGE]]\r
- specify library version info [each variable defaults to 0]\r
-\r
-All other options (arguments beginning with \`-') are ignored.\r
-\r
-Every other argument is treated as a filename. Files ending in \`.la' are\r
-treated as uninstalled libtool libraries, other files are standard or library\r
-object files.\r
-\r
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,\r
-only library objects (\`.lo' files) may be specified, and \`-rpath' is\r
-required, except when creating a convenience library.\r
-\r
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created\r
-using \`ar' and \`ranlib', or on Windows using \`lib'.\r
-\r
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file\r
-is created, otherwise an executable program is created."\r
- ;;\r
-\r
-uninstall)\r
- $echo \\r
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...\r
-\r
-Remove libraries from an installation directory.\r
-\r
-RM is the name of the program to use to delete files associated with each FILE\r
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed\r
-to RM.\r
-\r
-If FILE is a libtool library, all the files associated with it are deleted.\r
-Otherwise, only FILE itself is deleted using RM."\r
- ;;\r
-\r
-*)\r
- $echo "$modename: invalid operation mode \`$mode'" 1>&2\r
- $echo "$help" 1>&2\r
- exit $EXIT_FAILURE\r
- ;;\r
-esac\r
-\r
-$echo\r
-$echo "Try \`$modename --help' for more information about other modes."\r
-\r
-exit $?\r
-\r
-# The TAGs below are defined such that we never get into a situation\r
-# in which we disable both kinds of libraries. Given conflicting\r
-# choices, we go for a static library, that is the most portable,\r
-# since we can't tell whether shared libraries were disabled because\r
-# the user asked for that or because the platform doesn't support\r
-# them. This is particularly important on AIX, because we don't\r
-# support having both static and shared libraries enabled at the same\r
-# time on that platform, so we default to a shared-only configuration.\r
-# If a disable-shared tag is given, we'll fallback to a static-only\r
-# configuration. But we'll never go from static-only to shared-only.\r
-\r
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared\r
-disable_libs=shared\r
-# ### END LIBTOOL TAG CONFIG: disable-shared\r
-\r
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static\r
-disable_libs=static\r
-# ### END LIBTOOL TAG CONFIG: disable-static\r
-\r
-# Local Variables:\r
-# mode:shell-script\r
-# sh-indentation:2\r
-# End:\r
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = parameter
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-AR = ar
-ARFLAGS = cru
-libsslproxy_parameter_a_AR = $(AR) $(ARFLAGS)
-libsslproxy_parameter_a_LIBADD =
-am_libsslproxy_parameter_a_OBJECTS = \
- libsslproxy_parameter_a-parameter.$(OBJEXT) \
- libsslproxy_parameter_a-parameter_impl.$(OBJEXT)
-libsslproxy_parameter_a_OBJECTS = \
- $(am_libsslproxy_parameter_a_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
- -o $@
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libsslproxy_parameter_a_SOURCES)
-DIST_SOURCES = $(libsslproxy_parameter_a_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-noinst_LIBRARIES = libsslproxy_parameter.a
-AUTOMAKE_OPTIONS = foreign
-libsslproxy_parameter_a_SOURCES = \
- parameter_enum.h \
- parameter.h \
- parameter_impl.h \
- parameter.cpp \
- parameter_impl.cpp
-
-libsslproxy_parameter_a_CPPFLAGS = -O2 -g -I../../include -I../logger \
- -DVERSION=\"$(VERSION)\"
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign parameter/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign parameter/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libsslproxy_parameter.a: $(libsslproxy_parameter_a_OBJECTS) $(libsslproxy_parameter_a_DEPENDENCIES)
- -rm -f libsslproxy_parameter.a
- $(libsslproxy_parameter_a_AR) libsslproxy_parameter.a $(libsslproxy_parameter_a_OBJECTS) $(libsslproxy_parameter_a_LIBADD)
- $(RANLIB) libsslproxy_parameter.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_parameter_a-parameter.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-libsslproxy_parameter_a-parameter.o: parameter.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_parameter_a-parameter.o -MD -MP -MF "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo" -c -o libsslproxy_parameter_a-parameter.o `test -f 'parameter.cpp' || echo '$(srcdir)/'`parameter.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo" "$(DEPDIR)/libsslproxy_parameter_a-parameter.Po"; else rm -f "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parameter.cpp' object='libsslproxy_parameter_a-parameter.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_parameter_a-parameter.o `test -f 'parameter.cpp' || echo '$(srcdir)/'`parameter.cpp
-
-libsslproxy_parameter_a-parameter.obj: parameter.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_parameter_a-parameter.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo" -c -o libsslproxy_parameter_a-parameter.obj `if test -f 'parameter.cpp'; then $(CYGPATH_W) 'parameter.cpp'; else $(CYGPATH_W) '$(srcdir)/parameter.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo" "$(DEPDIR)/libsslproxy_parameter_a-parameter.Po"; else rm -f "$(DEPDIR)/libsslproxy_parameter_a-parameter.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parameter.cpp' object='libsslproxy_parameter_a-parameter.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_parameter_a-parameter.obj `if test -f 'parameter.cpp'; then $(CYGPATH_W) 'parameter.cpp'; else $(CYGPATH_W) '$(srcdir)/parameter.cpp'; fi`
-
-libsslproxy_parameter_a-parameter_impl.o: parameter_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_parameter_a-parameter_impl.o -MD -MP -MF "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo" -c -o libsslproxy_parameter_a-parameter_impl.o `test -f 'parameter_impl.cpp' || echo '$(srcdir)/'`parameter_impl.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo" "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Po"; else rm -f "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parameter_impl.cpp' object='libsslproxy_parameter_a-parameter_impl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_parameter_a-parameter_impl.o `test -f 'parameter_impl.cpp' || echo '$(srcdir)/'`parameter_impl.cpp
-
-libsslproxy_parameter_a-parameter_impl.obj: parameter_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsslproxy_parameter_a-parameter_impl.obj -MD -MP -MF "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo" -c -o libsslproxy_parameter_a-parameter_impl.obj `if test -f 'parameter_impl.cpp'; then $(CYGPATH_W) 'parameter_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/parameter_impl.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo" "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Po"; else rm -f "$(DEPDIR)/libsslproxy_parameter_a-parameter_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parameter_impl.cpp' object='libsslproxy_parameter_a-parameter_impl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsslproxy_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsslproxy_parameter_a-parameter_impl.obj `if test -f 'parameter_impl.cpp'; then $(CYGPATH_W) 'parameter_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/parameter_impl.cpp'; fi`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstLIBRARIES ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-sbin_PROGRAMS = sslproxy$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_sslproxy_OBJECTS = sslproxy-sslproxy.$(OBJEXT) \
- sslproxy-sslproxymain.$(OBJEXT) \
- sslproxy-sslproxyserver.$(OBJEXT) \
- sslproxy-sslproxysession.$(OBJEXT)
-sslproxy_OBJECTS = $(am_sslproxy_OBJECTS)
-sslproxy_DEPENDENCIES = ../logger/libsslproxy_logger.a \
- ../parameter/libsslproxy_parameter.a
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
- -o $@
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(sslproxy_SOURCES)
-DIST_SOURCES = $(sslproxy_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-AUTOMAKE_OPTIONS = foreign
-SSLPROXY_SBINDIR = @sbindir@
-sslproxy_CPPFLAGS = -O2 -g -I../include \
- -I../logger -I../parameter \
- -I/usr/local/include/boost \
- -pthread \
- -DVERSION=\"$(VERSION)\"
-
-sslproxy_SOURCES = \
- ../logger/logger_wrapper.h \
- ../parameter/parameter_wrapper.h \
- ../include/sslproxy.h \
- ../include/sslproxyserver.h \
- ../include/sslproxysession.h \
- sslproxy.cpp \
- sslproxymain.cpp \
- sslproxyserver.cpp \
- sslproxysession.cpp
-
-sslproxy_LDADD = ../logger/libsslproxy_logger.a \
- ../parameter/libsslproxy_parameter.a \
- -llog4cxx \
- -lrt \
- -lssl \
- -lboost_system-gcc41-mt \
- -lboost_thread-gcc41-mt
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-sslproxy$(EXEEXT): $(sslproxy_OBJECTS) $(sslproxy_DEPENDENCIES)
- @rm -f sslproxy$(EXEEXT)
- $(CXXLINK) $(sslproxy_LDFLAGS) $(sslproxy_OBJECTS) $(sslproxy_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sslproxy-sslproxy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sslproxy-sslproxymain.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sslproxy-sslproxyserver.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sslproxy-sslproxysession.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-sslproxy-sslproxy.o: sslproxy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxy.o -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxy.Tpo" -c -o sslproxy-sslproxy.o `test -f 'sslproxy.cpp' || echo '$(srcdir)/'`sslproxy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxy.Tpo" "$(DEPDIR)/sslproxy-sslproxy.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxy.cpp' object='sslproxy-sslproxy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxy.o `test -f 'sslproxy.cpp' || echo '$(srcdir)/'`sslproxy.cpp
-
-sslproxy-sslproxy.obj: sslproxy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxy.obj -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxy.Tpo" -c -o sslproxy-sslproxy.obj `if test -f 'sslproxy.cpp'; then $(CYGPATH_W) 'sslproxy.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxy.Tpo" "$(DEPDIR)/sslproxy-sslproxy.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxy.cpp' object='sslproxy-sslproxy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxy.obj `if test -f 'sslproxy.cpp'; then $(CYGPATH_W) 'sslproxy.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxy.cpp'; fi`
-
-sslproxy-sslproxymain.o: sslproxymain.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxymain.o -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxymain.Tpo" -c -o sslproxy-sslproxymain.o `test -f 'sslproxymain.cpp' || echo '$(srcdir)/'`sslproxymain.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxymain.Tpo" "$(DEPDIR)/sslproxy-sslproxymain.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxymain.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxymain.cpp' object='sslproxy-sslproxymain.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxymain.o `test -f 'sslproxymain.cpp' || echo '$(srcdir)/'`sslproxymain.cpp
-
-sslproxy-sslproxymain.obj: sslproxymain.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxymain.obj -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxymain.Tpo" -c -o sslproxy-sslproxymain.obj `if test -f 'sslproxymain.cpp'; then $(CYGPATH_W) 'sslproxymain.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxymain.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxymain.Tpo" "$(DEPDIR)/sslproxy-sslproxymain.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxymain.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxymain.cpp' object='sslproxy-sslproxymain.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxymain.obj `if test -f 'sslproxymain.cpp'; then $(CYGPATH_W) 'sslproxymain.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxymain.cpp'; fi`
-
-sslproxy-sslproxyserver.o: sslproxyserver.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxyserver.o -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxyserver.Tpo" -c -o sslproxy-sslproxyserver.o `test -f 'sslproxyserver.cpp' || echo '$(srcdir)/'`sslproxyserver.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxyserver.Tpo" "$(DEPDIR)/sslproxy-sslproxyserver.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxyserver.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxyserver.cpp' object='sslproxy-sslproxyserver.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxyserver.o `test -f 'sslproxyserver.cpp' || echo '$(srcdir)/'`sslproxyserver.cpp
-
-sslproxy-sslproxyserver.obj: sslproxyserver.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxyserver.obj -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxyserver.Tpo" -c -o sslproxy-sslproxyserver.obj `if test -f 'sslproxyserver.cpp'; then $(CYGPATH_W) 'sslproxyserver.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxyserver.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxyserver.Tpo" "$(DEPDIR)/sslproxy-sslproxyserver.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxyserver.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxyserver.cpp' object='sslproxy-sslproxyserver.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxyserver.obj `if test -f 'sslproxyserver.cpp'; then $(CYGPATH_W) 'sslproxyserver.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxyserver.cpp'; fi`
-
-sslproxy-sslproxysession.o: sslproxysession.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxysession.o -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxysession.Tpo" -c -o sslproxy-sslproxysession.o `test -f 'sslproxysession.cpp' || echo '$(srcdir)/'`sslproxysession.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxysession.Tpo" "$(DEPDIR)/sslproxy-sslproxysession.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxysession.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxysession.cpp' object='sslproxy-sslproxysession.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxysession.o `test -f 'sslproxysession.cpp' || echo '$(srcdir)/'`sslproxysession.cpp
-
-sslproxy-sslproxysession.obj: sslproxysession.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sslproxy-sslproxysession.obj -MD -MP -MF "$(DEPDIR)/sslproxy-sslproxysession.Tpo" -c -o sslproxy-sslproxysession.obj `if test -f 'sslproxysession.cpp'; then $(CYGPATH_W) 'sslproxysession.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxysession.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/sslproxy-sslproxysession.Tpo" "$(DEPDIR)/sslproxy-sslproxysession.Po"; else rm -f "$(DEPDIR)/sslproxy-sslproxysession.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='sslproxysession.cpp' object='sslproxy-sslproxysession.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sslproxy_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sslproxy-sslproxysession.obj `if test -f 'sslproxysession.cpp'; then $(CYGPATH_W) 'sslproxysession.cpp'; else $(CYGPATH_W) '$(srcdir)/sslproxysession.cpp'; fi`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-sbinPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-sbinPROGRAMS
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-sbinPROGRAMS ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-sbinPROGRAMS install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am uninstall-sbinPROGRAMS
-
-
-install:
- $(INSTALL) -m 755 -D \
- ./sslproxy \
- ./sslproxyadm \
- $(SSLPROXY_SBINDIR)
- mkdir -p /var/log/l7vs/sslproxy
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = sslfiles
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-AUTOMAKE_OPTIONS = foreign
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign sslfiles/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign sslfiles/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-
-install:
- $(INSTALL) -b -m 644 -D ./root.pem /etc/l7vs/sslproxy/root.pem
- $(INSTALL) -b -m 644 -D ./server.pem /etc/l7vs/sslproxy/server.pem
- $(INSTALL) -b -m 644 -D ./passwd.txt /etc/l7vs/sslproxy/passwd.txt
- $(INSTALL) -b -m 644 -D ./dh512.pem /etc/l7vs/sslproxy/dh512.pem
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: