+%<*ja>
+グルーの指定においては,上記に加えて各 \texttt{[$j$]} の各サブテーブル内に
+次のキーを指定できる,
+\begin{cslist}[style=standard]
+\item[priority=<priority>]
+ \Pkg{luatexja-adjust}による優先順位付き
+ 行長調整(\ref{ssec-adj}節)において,このグルーの優先度を指定する.許される値は以下の通り:
+ \begin{description}
+ \item[バージョン1のとき] $-4$から$+3$の間の整数
+ \item[バージョン2のとき] $-4$から$+3$の間の整数の2つ組\texttt{\{<stretch>, <shrink>\}}か,
+ または$-4$から$+3$の間の整数.<stretch>, <shrink>はそれぞれこのグルーが伸びるときの優先度,縮むときの
+ 優先度であり,単に整数$i$が指定された場合は\texttt{\{$i$, $i$\}}であると解釈される.
+ \end{description}
+ ここで指定する値は,大きい値ほど「先に伸ばされる」「先に縮ませる」ことを意味しており,省略時の値
+ は0である.範囲外の値が指定されたときの動作は未定義である.
+\item[kanjiskip\_natural=<num>\textrm{, }%
+ kanjiskip\_stretch=<num>\textrm{, }kanjiskip\_shrink=<num>]\leavevmode
+ \label{pg:ksp_nat}
+
+JFMによって本来挿入されるグルーの他に
+\Param{kanjiskip}分の空白を自然長(\texttt{kanjiskip\_natural}),伸び量(\texttt{kanjiskip\_stretch}),
+縮み量(\texttt{kanjiskip\_shrink})ごとに挿入する\footnote{本来\Param{xkanjiskip}が挿入される場所においては
+ \Param{xkanjiskip}分の空白を自然長・伸び量・縮み量ごとに.追加できる.}%
+ための指定である.いずれも省略された場合のデフォルト値は0(追加しない)である.
+
+例えば,\LuaTeX-jaの横組標準JFMの \texttt{jfm-ujis.lua} では,
+\begin{itemize}
+ \item 通常の文字「あ」と開き括弧類の間に入るグルーは,自然長・縮み量半角,伸び量0のグルー
+となっているが,さらに\Param{kanjiskip}の伸び量に \texttt{kanjiskip\_stretch}(ここでは1)を掛け
+ た分だけ伸びることが許される.
+ \item 同様に,閉じ括弧類(全角コンマ「,」も含む)と通常の文字「う」「え」の間にも
+自然長・縮み量半角,伸び量0のグルー
+となっているが,さらに\Param{kanjiskip}の伸び量に \texttt{kanjiskip\_stretch}(ここでは1)を掛け
+ た分だけ伸びることが許される.
+\end{itemize}
+となっている.従って,以下のような組版結果を得る.
+
+\medskip
+\begin{LTXexample}[width=16\zw]
+\leavevmode
+\ltjsetparameter{kanjiskip=0pt plus 3\zw}
+\vrule\hbox to 15\zw{あ「い」う,えお}\vrule
+\end{LTXexample}
+
+\end{cslist}
+%</ja>
+%<*en>
+In case of glue, one can specify following additional keys in each \texttt{[$j$]}
+ subtable:
+\begin{cslist}[style=standard]
+\item[priority=<priority>]
+An integer in $[-4,3]$ (treated as 0 if omitted), or
+a pair of these integers \texttt{\{<stretch>, <shrink>\}} (version~2 only).
+This is
+used only in line adjustment with priority by \Pkg{luatexja-adjust}
+(see Subsection~\ref{ssec-adj}). Higher value means the glue is easy to stretch,
+and is also easy to shrink.
+\item[kanjiskip\_natural=<num>\textrm{, }%
+ kanjiskip\_stretch=<num>\textrm{, }kanjiskip\_shrink=<num>]\leavevmode
+
+These keys specifies the amount of the natural width of \Param{kanjiskip}
+(the stretch/shrink part, respectively) which will be inserted
+in addition to the original JFM glue. Default values of them are all 0.
+
+As an example, in \texttt{jfm-ujis.lua}, the standard JFM in horizontal writing, we have
+\begin{itemize}
+ \item Between an ordinal letter ``あ'' and an ideographic opening bracket, we have
+a glue whose natural part and shrink part are both half-width, while its stretch part is
+ zero. However, this glue also can be stretched
+ as much as the stretch part of \Param{kanjiskip} times the value of
+ \texttt{kanjiskip\_stretch} key (1 in this case).
+ \item Between an ideographic closeing brackets (the ideographic comma ``,''
+ is included) and an ordinal letter, we have the same glue.
+ Again, this glue also can be stretched
+ as much as the stretch part of \Param{kanjiskip} times the value of
+ \texttt{kanjiskip\_stretch} key (1 in this case).
+\end{itemize}
+Hence we have the following result:
+
+\medskip
+\begin{LTXexample}[width=16\zw]
+\leavevmode
+\ltjsetparameter{kanjiskip=0pt plus 3\zw}
+\vrule\hbox to 15\zw{あ「い」う,えお}\vrule
+\end{LTXexample}
+
+\end{cslist}
+%</en>