-!MSP430FR2433.pat
-
-! ----------------------------------------------
-! MSP430FR2433 MEMORY MAP
-! ----------------------------------------------
-! 0000-0FFF = peripherals (4 KB)
-! 1000-17FF = ROM bootstrap loader BSL1 (2k)
-! 1800-19FF = info B (FRAM 512 B)
-! 1A00-1A7F = TLV device descriptor info (FRAM 128 B)
-! 1A80-1FFF = unused
-! 2000-2FFF = RAM (4 KB)
-! 2800-C3FF = unused
-! C400-FF7F = code memory (FRAM 15232 B)
-! FF80-FFFF = interrupt vectors (FRAM 128 B)
-! FFC00-FFFFF = BSL2 (2k)
-! ----------------------------------------------
-!PAGESIZE .equ 512 ; MPU unit
-! ----------------------------------------------
-! BSL
-! ----------------------------------------------
-BSL1=\$1000!
-BSL2=\$FFC00!
-! ----------------------------------------------
-! FRAM ; INFO B, TLV
-! ----------------------------------------------
-INFO_ORG =\$1800!
-INFO_LEN=\$0200!
-TLV_ORG=\$1A00! Device Descriptor Info (Tag-Lenght-Value)
-TLV_LEN=\$0080!
-DEVICEID=\$1A04!
-! ----------------------------------------------
-! RAM
-! ----------------------------------------------
-RAM_ORG=\$2000!
-RAM_LEN=\$1000!
-! ----------------------------------------------
-! FRAM
-! ----------------------------------------------
-MAIN_ORG=\$C400! Code space start
-xdodoes=\$C400! restore rDODOES: MOV #xdodoes,rDODOES
-xdocon=\$C40E! restore rDOCON: MOV #xdocon,rDOCON
-xdovar=\$C420! restore rDOVAR: MOV #xdocon,rDOVAR
-xdocol=\$C42A! restore rDOCOL: MOV #xdocol,rDOCOL only for DTC model = 1
-! to find DTC value, download \MSP430-FORTH\FastForthSpecs.4th
-! if DTC = 1, restore rDOCOL as this : MOV #xdocol,rDOCOL
-! if DTC = 2, restore rDOCOL as this : MOV #EXIT,rDOCOL
-! if DTC = 3, nothing to do, R7 is free for use.
-! ----------------------------------------------
-! Interrupt Vectors and signatures - MSP430FR2433
-! ----------------------------------------------
-FRAM_FULL=\$FF30! 80 bytes are sufficient considering what can be compiled in one line and WORD use.
-SIGNATURES=\$FF80! JTAG/BSL signatures
-JTAG_SIG1=\$FF80! if 0 (electronic fuse=0) enable JTAG/SBW ; reset by wipe and by S1+<reset>
-JTAG_SIG2=\$FF82! if JTAG_SIG <> |\$FFFFFFFF, \$00000000|, SBW and JTAG are locked
-BSL_SIG1=\$FF84!
-BSL_SIG2=\$FF86!
-JTAG_PASSWORD=\$FF88! 256 bits
-BSL_PASSWORD=\$FFE0! 256 bits
-VECT_ORG=\$FFDA! FFDA-FFFF
-VECT_LEN=\$26!
-! ----------------------------------------------
-
-
-P2_Vec=\$FFDA!
-P1_Vec=\$FFDC!
-ADC10_B_Vec=\$FFDE!
-eUSCI_B0_Vec=\$FFE0!
-eUSCI_A1_Vec=\$FFE2!
-eUSCI_A0_Vec=\$FFE4!
-WDT_Vec=\$FFE6!
-RTC_Vec=\$FFE8!
-TA3_x_Vec=\$FFEA!
-TA3_0_Vec=\$FFEC!
-TA2_x_Vec=\$FFEE!
-TA2_0_Vec=\$FFF0!
-TA1_x_Vec=\$FFF2!
-TA1_0_Vec=\$FFF4!
-TA0_x_Vec=\$FFF6!
-TA0_0_Vec=\$FFF8!
-U_NMI_Vec=\$FFFA!
-S_NMI_Vec=\$FFFC!
-RST_Vec=\$FFFE!
-
-
-LPM4=\$F8! SR(LPM4+GIE)
-LPM3=\$D8! SR(LPM3+GIE)
-LPM2=\$98! SR(LPM2+GIE)
-LPM1=\$58! SR(LPM1+GIE)
-LPM0=\$18! SR(LPM0+GIE)
-
-
-! ============================================
-! SR bits :
-! ============================================
-\#C=\#1! = SR(0) Carry flag
-\#Z=\#2! = SR(1) Zero flag
-\#N=\#4! = SR(2) Negative flag
-\#GIE=\#8! = SR(3) Enable Int
-\#CPUOFF=\#\$10!= SR(4) CPUOFF
-\#OSCOFF=\#\$20!= SR(5) OSCOFF
-\#SCG0=\#\$40! = SR(6) SCG0
-\#SCG1=\#\$80! = SR(7) SCG1
-\#V=\#\$100! = SR(8) oVerflow flag
-\#UF9=\#\$200! = SR(9) User Flag 1 used by ?NUMBER --> INTERPRET --> LITERAL to process double numbers, else free for use.
-\#UF10=\#\$400! = SR(10) User Flag 2
-\#UF11=\#\$800! = SR(11) User Flag 3
-
-! ============================================
-! PORTx, Reg bits :
-! ============================================
-BIT0=1!
-BIT1=2!
-BIT2=4!
-BIT3=8!
-BIT4=\$10!
-BIT5=\$20!
-BIT6=\$40!
-BIT7=\$80!
-BIT8=\$100!
-BIT9=\$200!
-BIT10=\$400!
-BIT11=\$800!
-BIT12=\$1000!
-BIT13=\$2000!
-BIT14=\$4000!
-BIT15=\$8000!
-
-! ============================================
-! symbolic codes :
-! ============================================
-RET=MOV \@R1+,R0! \ MOV @RSP+,PC
-NOP=MOV \#0,R3! \ one word one cycle
-NOP2=\$3C00 ,! \ compile JMP 0 one word two cycles
-NOP3=MOV R0,R0! \ MOV PC,PC one word three cycles
-NEXT=MOV \@R13+,R0! \ MOV @IP+,PC
-SEMI=MOV \@R1+,R13\nMOV \@R13+,R0!
-
-
-! ===========================================================
-! MSP430FR2xxx and FR4xxx DEVICES HAVE SPECIFIC RAM ADDRESSES
-! ===========================================================
-
-
-! You can check the addresses below by comparing their values in DTCforthMSP430FRxxxx.lst
-! those addresses are usable with the symbolic assembler
-
-! ============================================
-! FastForth INFO(DCBA) memory map (256 bytes):
-! ============================================
-
-INI_THREAD=\$1800! .word THREADS
-TERMBRW_RST=\$1802! .word TERMBRW_RST
-TERMMCTLW_RST=\$1804! .word TERMMCTLW_RST
-FREQ_KHZ=\$1806! .word FREQUENCY
-
-SAVE_SYSRSTIV=\$1808! to enable SYSRSTIV read
-LPM_MODE=\$180A! LPM0+GIE is the default mode
-INIDP=\$180C! define RST_STATE, init by wipe
-INIVOC=\$180E! define RST_STATE, init by wipe
-VERSION=\$1810!
-KERNEL_ADDON=\$1812!
-RXON=\$1814!
-RXOFF=\$1816!
-ReadSectorWX=\$1818! call with W = SectorLO X = SectorHI
-WriteSectorWX=\$181A! call with W = SectorLO X = SectorHI
-
-! ============================================
-! FORTH RAM areas :
-! ============================================
-
-LSTACK_SIZE=\#16! words
-PSTACK_SIZE=\#48! words
-RSTACK_SIZE=\#48! words
-PAD_LEN=\#84! bytes
-TIB_LEN=\#84! bytes
-HOLD_SIZE=\#34! bytes
-
-! ============================================
-! FastForth RAM memory map (>= 1k):
-! ============================================
-
-
-LEAVEPTR=\$2000! \ Leave-stack pointer, init by QUIT
-LSATCK=\$2000! \ leave stack, grow up
-PSTACK=\$2080! \ parameter stack, grow down
-RSTACK=\$20E0! \ Return stack, grow down
-
-PAD_I2CADR=\$20E0! \ RX I2C address
-PAD_I2CCNT=\$20E2! \ count max
-PAD_ORG=\$20E4! \ user scratch pad buffer, 84 bytes, grow up
-
-TIB_I2CADR=\$2138! \ TX I2C address
-TIB_I2CCNT=\$213A! \ count of bytes
-TIB_ORG=\$213C! \ Terminal input buffer, 84 bytes, grow up
-
-HOLDS_ORG=\$2190! \ a good address for HOLDS
-BASE_HOLD=\$21B2! \ BASE HOLD area, grow down
-
-! ----------------------
-! NOT SAVED VARIABLES
-! ----------------------
-
-HP=\$21B2! HOLD ptr
-CAPS=\$21B4! CAPS ON/OFF flag, must be set to -1 before first reset !
-LAST_NFA=\$21B6!
-LAST_THREAD=\$21B8!
-LAST_CFA=\$21BA!
-LAST_PSP=\$21BC!
-
-!STATE=\$21BE! Interpreter state
-
-SOURCE_LEN=\$21C0! len of input stream
-SOURCE_ADR=\$21C2! adr of input stream
-TOIN=\$21C4! >IN
-DP=\$21C6! dictionary ptr
-
-LASTVOC=\$21C8! keep VOC-LINK
-CONTEXT=\$21CA! CONTEXT dictionnary space (8 CELLS)
-CURRENT=\$21DA! CURRENT dictionnary ptr
-
-!BASE=\$21DC! numeric base, must be defined before first reset !
-LINE=\$21DE! line in interpretation, activated with NOECHO, desactivated with ECHO
-! ---------------------------------------
-!21E0! 14 RAM bytes free conditionnaly
-! ---------------------------------------
-!SAV_CURRENT=\$21E0! preserve CURRENT when create assembler words
-!ASMBW1=\$21E2 assembler backward reference 1
-!ASMBW2=\$21E4 assembler backward reference 2
-!ASMBW3=\$21E6 assembler backward reference 3
-!ASMFW1=\$21E8 assembler forward reference 1
-!ASMFW2=\$21EA assembler forward reference 2
-!ASMFW3=\$21EC assembler forward reference 3
-! ---------------------------------------
-!21EE! 14 RAM bytes free
-! ---------------------------------------
-
-! ---------------------------------------
-! SD buffer
-! ---------------------------------------
-SD_BUF_I2ADR=\$21FC!
-SD_BUF_I2CNT=\$21FE!
-SD_BUF=\$2200! \ SD_Card buffer
-BUFEND=\$2400!
-
-! ---------------------------------------
-! FAT16 FileSystemInfos
-! ---------------------------------------
-FATtype=\$2402!
-BS_FirstSectorL=\$2404!
-BS_FirstSectorH=\$2406!
-OrgFAT1=\$2408!
-FATSize=\$240A!
-OrgFAT2=\$240C!
-OrgRootDir=\$240E!
-OrgClusters=\$2410! Sector of Cluster 0
-SecPerClus=\$2412!
-
-! ---------------------------------------
-! SD command
-! ---------------------------------------
-SD_CMD_FRM=\$2414! 6 bytes SD_CMDx inverted frame \${CRC,ll,LL,hh,HH,CMD}
-SD_CMD_FRM0=\$2414! CRC:ll word access
-SD_CMD_FRM1=\$2415! ll byte access
-SD_CMD_FRM2=\$2416! LL:hh word access
-SD_CMD_FRM3=\$2417! hh byte access
-SD_CMD_FRM4=\$2418! HH:CMD word access
-SD_CMD_FRM5=\$2419! CMD byte access
-SectorL=\$241A! 2 words
-SectorH=\$241C!
-
-! ---------------------------------------
-! BUFFER management
-! ---------------------------------------
-BufferPtr=\$241E!
-BufferLen=\$2420!
-
-! ---------------------------------------
-! FAT entry
-! ---------------------------------------
-ClusterL=\$2422! 16 bits wide (FAT16)
-ClusterH=\$2424! 16 bits wide (FAT16)
-NewClusterL=\$2426! 16 bits wide (FAT16)
-NewClusterH=\$2428! 16 bits wide (FAT16)
-CurFATsector=\$242A!
-
-! ---------------------------------------
-! DIR entry
-! ---------------------------------------
-DIRclusterL=\$242C! contains the Cluster of current directory ; 1 if FAT16 root directory
-DIRclusterH=\$242E! contains the Cluster of current directory ; 1 if FAT16 root directory
-EntryOfst=\$2430!
-
-! ---------------------------------------
-! Handle Pointer
-! ---------------------------------------
-CurrentHdl=\$2432! contains the address of the last opened file structure, or 0
-
-! ---------------------------------------
-! Load file operation
-! ---------------------------------------
-pathname=\$2434!
-EndOfPath=\$2436!
-
-! ---------------------------------------
-! Handle structure
-! ---------------------------------------
-! three handle tokens :
-! token = 0 : free handle
-! token = 1 : file to read
-! token = 2 : file updated (write)
-! token =-1 : LOAD"ed file (source file)
-
-! offset values
-HDLW_PrevHDL=0! previous handle ; used by LOAD"
-HDLB_Token=2! token
-HDLB_ClustOfst=3! Current sector offset in current cluster (Byte)
-HDLL_DIRsect=4! Dir SectorL (Long)
-HDLH_DIRsect=6!
-HDLW_DIRofst=8! BUFFER offset of Dir entry
-HDLL_FirstClus=10! File First ClusterLo (identify the file)
-HDLH_FirstClus=12! File First ClusterHi (byte)
-HDLL_CurClust=14! Current ClusterLo
-HDLH_CurClust=16! Current ClusterHi (T as 3Th byte)
-HDLL_CurSize=18! written size / not yet read size (Long)
-HDLH_CurSize=20! written size / not yet read size (Long)
-HDLW_BUFofst=22! BUFFER offset ; used by LOAD" and by WRITE"
-
-
-!OpenedFirstFile ; "openedFile" structure
-HandleMax=8!
-HandleLenght=24!
-FirstHandle=\$2438!
-HandleEnd=\$24F8!
-
-!Stack of return IP for LOADed files, preincrement stack structure
-LOADPTR=\$24F8!
-LOAD_STACK=\$24FA!
-LOAD_STACK_END=\$2530!
-
-!SD_card Input Buffer
-SDIB_I2CADR=\$2530!
-SDIB_I2CCNT=\$2532!
-SDIB_ORG=\$2534!
-
-SD_END_DATA=\$2588!
-
-
-
-! ----------------------------------------------------------------------
-! MSP430FR2433 Peripheral File Map
-! ----------------------------------------------------------------------
-!SFR_SFR .equ 0100h ; Special function
-!PMM_SFR .equ 0120h ; PMM
-!SYS_SFR .equ 0140h ; SYS
-!CS_SFR .equ 0180h ; Clock System
-!FRAM_SFR .equ 01A0h ; FRAM control
-!CRC16_SFR .equ 01C0h
-!WDT_A_SFR .equ 01CCh ; Watchdog
-!PA_SFR .equ 0200h ; PORT1/2
-!PB_SFR .equ 0220h ; PORT3
-!RTC_SFR .equ 0300h
-!TA0_SFR .equ 0380h
-!TA1_SFR .equ 03C0h
-!TA2_SFR .equ 0400h
-!TA3_SFR .equ 0440h
-!MPY_SFR .equ 04C0h
-!eUSCI_A0_SFR .equ 0500h ; eUSCI_A0
-!eUSCI_A1_SFR .equ 0520h ; eUSCI_A1
-!eUSCI_B0_SFR .equ 0540h ; eUSCI_B0
-!BACK_MEM_SFR .equ 0660h
-!ADC10_B_SFR .equ 0700h
-
-SFRIE1=\$100! \ SFR enable register
-SFRIFG1=\$102! \ SFR flag register
-SFRRPCR=\$104! \ SFR reset pin control
-
-PMMCTL0=\$120! \ PMM Control 0
-PMMCTL1=\$122! \ PMM Control 0
-PMMCTL2=\$124! \ PMM Control 0
-PMMIFG=\$12A! \ PMM interrupt flags
-PM5CTL0=\$130! \ PM5 Control 0
-
-SYSCTL=\$140! \ System control
-SYSBSLC=\$142! \ Bootstrap loader configuration area
-SYSJMBC=\$146! \ JTAG mailbox control
-SYSJMBI0=\$148! \ JTAG mailbox input 0
-SYSJMBI1=\$14A! \ JTAG mailbox input 1
-SYSJMBO0=\$14C! \ JTAG mailbox output 0
-SYSJMBO1=\$14E! \ JTAG mailbox output 1
-SYSUNIV=\$15A! \ User NMI vector generator
-SYSSNIV=\$15C! \ System NMI vector generator
-SYSRSTIV=\$15E! \ Reset vector generator
-SYSCFG0=\$160! \ System configuration 0
-SYSCFG1=\$162! \ System configuration 1
-SYSCFG2=\$164! \ System configuration 2
-
-CSCTL0=\$180! \ CS control 0
-CSCTL1=\$182! \ CS control 1
-CSCTL2=\$184! \ CS control 2
-CSCTL3=\$186! \ CS control 3
-CSCTL4=\$188! \ CS control 4
-CSCTL5=\$18A! \ CS control 5
-CSCTL6=\$18C! \ CS control 6
-CSCTL7=\$18E! \ CS control 7
-CSCTL8=\$190! \ CS control 8
-
-FRCTLCTL0=\$1A0! \ FRAM control 0
-GCCTL0=\$1A4! \ General control 0
-GCCTL1=\$1A6! \ General control 1
-
-CRC16DI=\$1C0! \ CRC data input
-CRCDIRB=\$1C2! \ CRC data input reverse byte
-CRCINIRES=\$1C4! \ CRC initialization and result
-CRCRESR=\$1C6! \ CRC result reverse byte
-
-WDTCTL=\$1CC! \ WDT control register
-
-PAIN=\$200!
-PAOUT=\$202!
-PADIR=\$204!
-PAREN=\$206!
-PASEL0=\$20A!
-PASEL1=\$20C!
-PAIES=\$218!
-PAIE=\$21A!
-PAIFG=\$21C!
-
-P1IN=\$200!
-P1OUT=\$202!
-P1DIR=\$204!
-P1REN=\$206!
-P1SEL0=\$20A!
-P1SEL1=\$20C!
-P1IV=\$20E!
-P1IES=\$218!
-P1IE=\$21A!
-P1IFG=\$21C!
-
-P2IN=\$201!
-P2OUT=\$203!
-P2DIR=\$205!
-P2REN=\$207!
-P2SEL0=\$20B!
-P2SEL1=\$20D!
-P2IES=\$219!
-P2IE=\$21B!
-P2IFG=\$21D!
-P2IV=\$21E!
-
-P3IN=\$220!
-P3OUT=\$222!
-P3DIR=\$224!
-P3REN=\$226!
-P3SEL0=\$22A!
-P3SEL1=\$22C!
-
-RTCCTL=\$300! \ RTC control
-RTCIV=\$304! \ RTC interrupt vector word
-RTCMOD=\$308! \ RTC modulo
-RTCCNT=\$30C! \ RTC counter register
-
-TACLR=4!
-TAIFG=1!
-CCIFG=1!
-
-TA0CTL=\$380! \ TA0 control
-TA0CCTL0=\$382! \ Capture/compare control 0
-TA0CCTL1=\$384! \ Capture/compare control 1
-TA0CCTL2=\$386! \ Capture/compare control 2
-TA0R=\$390! \ TA0 counter register
-TA0CCR0=\$392! \ Capture/compare register 0
-TA0CCR1=\$394! \ Capture/compare register 1
-TA0CCR2=\$396! \ Capture/compare register 2
-TA0EX0=\$3A0! \ TA0 expansion register 0
-TA0IV=\$3AE! \ TA0 interrupt vector
-
-TA1CTL=\$3C0! \ TA1 control
-TA1CCTL0=\$3C2! \ Capture/compare control 0
-TA1CCTL1=\$3C4! \ Capture/compare control 1
-TA1CCTL2=\$3C6! \ Capture/compare control 2
-TA1R=\$3D0! \ TA1 counter register
-TA1CCR0=\$3D2! \ Capture/compare register 0
-TA1CCR1=\$3D4! \ Capture/compare register 1
-TA1CCR2=\$3D6! \ Capture/compare register 2
-TA1EX0=\$3E0! \ TA1 expansion register 0
-TA1IV=\$3EE! \ TA1 interrupt vector
-
-TA2CTL=\$400! \ TA2 control
-TA2CCTL0=\$402! \ Capture/compare control 0
-TA2CCTL1=\$404! \ Capture/compare control 1
-TA2R=\$410! \ TA2 counter register
-TA2CCR0=\$412! \ Capture/compare register 0
-TA2CCR1=\$414! \ Capture/compare register 1
-TA2EX0=\$420! \ TA2 expansion register 0
-TA2IV=\$42E! \ TA2 interrupt vector
-
-TA3CTL=\$440! \ TA3 control
-TA3CCTL0=\$442! \ Capture/compare control 0
-TA3CCTL1=\$444! \ Capture/compare control 1
-TA3R=\$450! \ TA3 counter register
-TA3CCR0=\$452! \ Capture/compare register 0
-TA3CCR1=\$454! \ Capture/compare register 1
-TA3EX0=\$460! \ TA3 expansion register 0
-TA3IV=\$46E! \ TA3 interrupt vector
-
-MPY=\$4C0! \ 16-bit operand 1 \96 multiply
-MPYS=\$4C2! \ 16-bit operand 1 \96 signed multiply
-MAC=\$4C4! \ 16-bit operand 1 \96 multiply accumulate
-MACS=\$4C6! \ 16-bit operand 1 \96 signed multiply accumulate
-OP2=\$4C8! \ 16-bit operand 2
-RESLO=\$4CA! \ 16 × 16 result low word
-RESHI=\$4CC! \ 16 × 16 result high word
-SUMEXT=\$4CE! \ 16 × 16 sum extension register
-MPY32L=\$4D0! \ 32-bit operand 1 \96 multiply low word
-MPY32H=\$4D2! \ 32-bit operand 1 \96 multiply high word
-MPYS32L=\$4D4! \ 32-bit operand 1 \96 signed multiply low word
-MPYS32H=\$4D6! \ 32-bit operand 1 \96 signed multiply high word
-MAC32L=\$4D8! \ 32-bit operand 1 \96 multiply accumulate low word
-MAC32H=\$4DA! \ 32-bit operand 1 \96 multiply accumulate high word
-MACS32L=\$4DC! \ 32-bit operand 1 \96 signed multiply accumulate low word
-MACS32H=\$4DE! \ 32-bit operand 1 \96 signed multiply accumulate high word
-OP2L=\$4E0! \ 32-bit operand 2 \96 low word
-OP2H=\$4E2! \ 32-bit operand 2 \96 high word
-RES0=\$4E4! \ 32 × 32 result 0 \96 least significant word
-RES1=\$4E6! \ 32 × 32 result 1
-RES2=\$4E8! \ 32 × 32 result 2
-RES3=\$4EA! \ 32 × 32 result 3 \96 most significant word
-MPY32CTL0=\$4EC! \ MPY32 control register 0
-
-
-UCA0CTLW0=\$500! \ eUSCI_A control word 0
-UCA0CTLW1=\$502! \ eUSCI_A control word 1
-UCA0BRW=\$506!
-UCA0BR0=\$506! \ eUSCI_A baud rate 0
-UCA0BR1=\$507! \ eUSCI_A baud rate 1
-UCA0MCTLW=\$508! \ eUSCI_A modulation control
-UCA0STAT=\$50A! \ eUSCI_A status
-UCA0RXBUF=\$50C! \ eUSCI_A receive buffer
-UCA0TXBUF=\$50E! \ eUSCI_A transmit buffer
-UCA0ABCTL=\$510! \ eUSCI_A LIN control
-UCA0IRTCTL=\$512! \ eUSCI_A IrDA transmit control
-UCA0IRRCTL=\$513! \ eUSCI_A IrDA receive control
-UCA0IE=\$51A! \ eUSCI_A interrupt enable
-UCA0IFG=\$51C! \ eUSCI_A interrupt flags
-UCA0IV=\$51E! \ eUSCI_A interrupt vector word
-
-UCA1CTLW0=\$520! \ eUSCI_A control word 0
-UCA1CTLW1=\$522! \ eUSCI_A control word 1
-UCA1BRW=\$526!
-UCA1BR0=\$526! \ eUSCI_A baud rate 0
-UCA1BR1=\$527! \ eUSCI_A baud rate 1
-UCA1MCTLW=\$528! \ eUSCI_A modulation control
-UCA1STAT=\$52A! \ eUSCI_A status
-UCA1RXBUF=\$52C! \ eUSCI_A receive buffer
-UCA1TXBUF=\$52E! \ eUSCI_A transmit buffer
-UCA1ABCTL=\$530! \ eUSCI_A LIN control
-UCA1IRTCTL=\$532! \ eUSCI_A IrDA transmit control
-UCA1IRRCTL=\$533! \ eUSCI_A IrDA receive control
-UCA1IE=\$53A! \ eUSCI_A interrupt enable
-UCA1IFG=\$53C! \ eUSCI_A interrupt flags
-UCA1IV=\$53E! \ eUSCI_A interrupt vector word
-
-UCB0CTLW0=\$540! \ eUSCI_B control word 0
-UCB0CTLW1=\$542! \ eUSCI_B control word 1
-UCB0BRW=\$546!
-UCB0BR0=\$546! \ eUSCI_B bit rate 0
-UCB0BR1=\$547! \ eUSCI_B bit rate 1
-UCB0STATW=\$548! \ eUSCI_B status word
-UCBCNT0=\$549! \ eUSCI_B hardware count
-UCB0TBCNT=\$54A! \ eUSCI_B byte counter threshold
-UCB0RXBUF=\$54C! \ eUSCI_B receive buffer
-UCB0TXBUF=\$54E! \ eUSCI_B transmit buffer
-UCB0I2COA0=\$554! \ eUSCI_B I2C own address 0
-UCB0I2COA1=\$556! \ eUSCI_B I2C own address 1
-UCB0I2COA2=\$558! \ eUSCI_B I2C own address 2
-UCB0I2COA3=\$55A! \ eUSCI_B I2C own address 3
-UCB0ADDRX=\$55C! \ eUSCI_B received address
-UCB0ADDMASK=\$55E! \ eUSCI_B address mask
-UCB0I2CSA=\$560! \ eUSCI I2C slave address
-UCB0IE=\$56A! \ eUSCI interrupt enable
-UCB0IFG=\$56C! \ eUSCI interrupt flags
-UCB0IV=\$56E! \ eUSCI interrupt vector word
-
-UCTXACK=\$20!
-UCTR=\$10!
-
-BAKMEM0=\$660! \ Backup Memory 0
-BAKMEM1=\$662! \ Backup Memory 1
-BAKMEM2=\$664! \ Backup Memory 2
-BAKMEM3=\$666! \ Backup Memory 3
-BAKMEM4=\$668! \ Backup Memory 4
-BAKMEM5=\$66A! \ Backup Memory 5
-BAKMEM6=\$66C! \ Backup Memory 6
-BAKMEM7=\$66E! \ Backup Memory 7
-BAKMEM8=\$670! \ Backup Memory 8
-BAKMEM9=\$672! \ Backup Memory 9
-BAKMEM10=\$674! \ Backup Memory 10
-BAKMEM11=\$676! \ Backup Memory 11
-BAKMEM12=\$678! \ Backup Memory 12
-BAKMEM13=\$67A! \ Backup Memory 13
-BAKMEM14=\$67C! \ Backup Memory 14
-BAKMEM15=\$67E! \ Backup Memory 15
-
-ADC10CTL0=\$700! \ ADC10_B Control register 0
-ADC10CTL1=\$702! \ ADC10_B Control register 1
-ADC10CTL2=\$704! \ ADC10_B Control register 2
-ADC10LO=\$706! \ ADC10_B Window Comparator Low Threshold
-ADC10HI=\$708! \ ADC10_B Window Comparator High Threshold
-ADC10MCTL0=\$70A! \ ADC10_B Memory Control Register 0
-ADC10MEM0=\$712! \ ADC10_B Conversion Memory Register
-ADC10IE=\$71A! \ ADC10_B Interrupt Enable
-ADC10IFG=\$71C! \ ADC10_B Interrupt Flags
-ADC10IV=\$71E! \ ADC10_B Interrupt Vector Word
-
-ADCON=\$10!
-ADCSTART=\$03!
+@set-syntax{C;\;}! replace ! by semicolon
+;MSP430FR2433.pat
+
+; ----------------------------------------------
+; MSP430FR2433 MEMORY MAP
+; ----------------------------------------------
+; 0000-0FFF = peripherals (4 KB)
+; 1000-17FF = ROM bootstrap loader BSL1 (2k)
+; 1800-19FF = info B (FRAM 512 B)
+; 1A00-1A7F = TLV device descriptor info (FRAM 128 B)
+; 2000-2FFF = RAM (4 KB)
+; C400-FF7F = code memory (FRAM 15232 B)
+; FF80-FFFF = interrupt vectors (FRAM 128 B)
+; FFC00-FFFFF = BSL2 (2k)
+; ----------------------------------------------
+;PAGESIZE .equ 512 ; MPU unit
+
+
+; ============================================
+; BSL
+; ============================================
+BSL1=\$1000;
+BSL2=\$FFC00;
+
+; ============================================
+; FRAM INFO
+; ============================================
+INFO_ORG =\$1800;
+INFO_LEN=\$0200;
+
+; See MSP430FRxxxx.pat
+
+; ============================================
+; FRAM TLV
+; ============================================
+
+; See MSP430FRxxxx.pat
+
+; ============================================
+; RAM
+; ============================================
+RAM_ORG=\$2000;
+RAM_LEN=\$1000;
+
+; ---------------------------------------
+; FORTH RAM areas :
+; ---------------------------------------
+
+; See MSP430FRxxxx.pat
+
+; ---------------------------------------
+; FastForth RAM memory map (>= 1k):
+; ---------------------------------------
+LEAVEPTR=\$2000; Leave-stack pointer, init by QUIT
+LSATCK=\$2000; leave stack, grow up
+PSTACK=\$2080; parameter stack, grow down
+RSTACK=\$20E0; Return stack, grow down
+;
+PAD_I2CADR=\$20E0; RX I2C address
+PAD_I2CCNT=\$20E2; count max
+PAD_ORG=\$20E4; user scratch pad buffer, 84 bytes, grow up
+;
+TIB_I2CADR=\$2138; TX I2C address
+TIB_I2CCNT=\$213A; count of bytes
+TIB_ORG=\$213C; Terminal input buffer, 84 bytes, grow up
+;
+HOLDS_ORG=\$2190; base address for HOLDS
+HOLD_BASE=\$21B2; BASE HOLD area, grow down
+;
+HP=\$21B2; HOLD ptr
+STATEADR=\$21B4; Interpreter state
+BASEADR=\$21B6; base
+CAPS=\$21B8; CAPS ON/OFF
+SOURCE_LEN=\$21BA; len of input stream
+SOURCE_ORG=\$21BC; adr of input stream
+TOIN=\$21BE; >IN
+;
+DP=\$21C0; dictionary ptr
+LASTVOC=\$21C2; keep VOC-LINK
+CURRENT=\$21C4; CURRENT dictionnary ptr
+CONTEXT=\$21C6; CONTEXT dictionnary space (8 + Null CELLS)
+;
+; ---------------------------------------
+; RAM_ORG + $1D8 : may be shared between FORTH compiler and user application
+; ---------------------------------------
+LAST_NFA=\$21D8;
+LAST_THREAD=\$21DA;
+LAST_CFA=\$21DC;
+LAST_PSP=\$21DE;
+ASMBW1=\$21E0; 3 backward labels
+ASMBW2=\$21E2;
+ASMBW3=\$21E4;
+ASMFW1=\$21E6; 3 forward labels
+ASMFW2=\$21E8;
+ASMFW3=\$21EA;
+;
+; ---------------------------------------
+; RAM_ORG + $1EC RAM free
+; ---------------------------------------
+;
+; ---------------------------------------
+; RAM_ORG + $1FC: SD buffer
+; ---------------------------------------
+SD_BUF_I2ADR=\$21FC;
+SD_BUF_I2CNT=\$21FE;
+SD_BUF=\$2200; \ SD_Card buffer
+BUFEND=\$2400;
+
+; ---------------------------------------
+; FAT16 FileSystemInfos
+; ---------------------------------------
+FATtype=\$2402;
+BS_FirstSectorL=\$2404;
+BS_FirstSectorH=\$2406;
+OrgFAT1=\$2408;
+FATSize=\$240A;
+OrgFAT2=\$240C;
+OrgRootDir=\$240E;
+OrgClusters=\$2410; Sector of Cluster 0
+SecPerClus=\$2412;
+
+; ---------------------------------------
+; SD command
+; ---------------------------------------
+SD_CMD_FRM=\$2414; 6 bytes SD_CMDx inverted frame \${CRC,ll,LL,hh,HH,CMD}
+SD_CMD_FRM0=\$2414; CRC:ll word access
+SD_CMD_FRM1=\$2415; ll byte access
+SD_CMD_FRM2=\$2416; LL:hh word access
+SD_CMD_FRM3=\$2417; hh byte access
+SD_CMD_FRM4=\$2418; HH:CMD word access
+SD_CMD_FRM5=\$2419; CMD byte access
+SectorL=\$241A; 2 words
+SectorH=\$241C;
+
+; ---------------------------------------
+; BUFFER management
+; ---------------------------------------
+BufferPtr=\$241E;
+BufferLen=\$2420;
+
+; ---------------------------------------
+; FAT entry
+; ---------------------------------------
+ClusterL=\$2422; 16 bits wide (FAT16)
+ClusterH=\$2424; 16 bits wide (FAT16)
+LastFATsector=\$2426; Set by FreeAllClusters, used by OPEN_OVERWRITE
+LastFAToffset=\$2428; Set by FreeAllClusters, used by OPEN_OVERWRITE
+FATsector=\$242A; used by APPEND"
+
+; ---------------------------------------
+; DIR entry
+; ---------------------------------------
+DIRclusterL=\$242C; contains the Cluster of current directory ; 1 if FAT16 root directory
+DIRclusterH=\$242E; contains the Cluster of current directory ; 1 if FAT16 root directory
+EntryOfst=\$2430;
+
+; ---------------------------------------
+; Handle Pointer
+; ---------------------------------------
+CurrentHdl=\$2432; contains the address of the last opened file structure, or 0
+
+; ---------------------------------------
+; Load file operation
+; ---------------------------------------
+pathname=\$2434;
+EndOfPath=\$2436;
+
+; ---------------------------------------
+; Handle structure
+; ---------------------------------------
+; three handle tokens :
+; token = 0 : free handle
+; token = 1 : file to read
+; token = 2 : file updated (write)
+; token =-1 : LOAD"ed file (source file)
+
+; offset values
+HDLW_PrevHDL=0; previous handle ; used by LOAD"
+HDLB_Token=2; token
+HDLB_ClustOfst=3; Current sector offset in current cluster (Byte)
+HDLL_DIRsect=4; Dir SectorL (Long)
+HDLH_DIRsect=6;
+HDLW_DIRofst=8; BUFFER offset of Dir entry
+HDLL_FirstClus=10; File First ClusterLo (identify the file)
+HDLH_FirstClus=12; File First ClusterHi (byte)
+HDLL_CurClust=14; Current ClusterLo
+HDLH_CurClust=16; Current ClusterHi (T as 3Th byte)
+HDLL_CurSize=18; written size / not yet read size (Long)
+HDLH_CurSize=20; written size / not yet read size (Long)
+HDLW_BUFofst=22; BUFFER offset ; used by LOAD" and by WRITE"
+HDLW_PrevLEN=24; previous LEN
+HDLW_PrevORG=26; previous ORG
+
+
+;OpenedFirstFile ; "openedFile" structure
+HandleMax=8;
+HandleLenght=28;
+FirstHandle=\$2438;
+HandleEnd=\$2518;
+
+;SD_card Input Buffer
+SDIB_I2CADR=\$2518;
+SDIB_I2CCNT=\$251A;
+SDIB_ORG=\$251C;
+
+SD_END=\$2570;
+SD_LEN=\$16E;
+
+; ============================================
+; FRAM MAIN
+; ============================================
+MAIN_ORG=\$C400; Code space start
+; ----------------------------------------------
+\#LIT=\#\$C400; asm CODE run time of LITERAL
+\#XSQUOTE=\#\$C414; asm CODE run time of QUOTE
+\#MUSMOD=\#\$C428; asm CODE 32/16 unsigned division, used by ?NUMBER, UM/MOD
+\#MDIV1DIV2=\#\$C43A; asm CODE input for 48/16 unsigned division with DVDhi=0, see DOUBLE M*/
+\#MDIV1=\#\$C442; asm CODE input for 48/16 unsigned division, see DOUBLE M*/
+\#RET_ADR=\#\$C46C; asm CODE of INIT_SOFT_PFA and MARKER+8 definitions,
+\#SETIB=\#\$C46E; CODE Set Input Buffer with org & len values, reset >IN pointer
+\#REFILL=\#\$C47E; CODE accept one line from input and leave org len of input buffer
+\#CIB_ORG=\#\$C48A; [CIB_ORG] = TIB_ORG by default; may be redirected to SDIB_ORG
+\#QFBRAN=\#\$C496; CODE compiled by IF UNTIL
+\#BRAN=\#\$C49C; CODE compiled by ELSE REPEAT AGAIN
+\#NEXT_ADR=\#\$C49E; CODE NEXT instruction (MOV @IP+,PC)
+\#XDODOES=\#\$C4A0; to restore rDODOES: MOV #XDODOES,rDODOES
+\#XDOCON=\#\$C4AE; to restore rDOCON: MOV #XDOCON,rDOCON
+; to restore rDOVAR: MOV &INIT_DOVAR,rDOVAR
+; to restore rDOCOL: MOV &INIT_DOCOL,rDOCOL
+\#INIT_FORTH=\#\$C4BA;
+\#ABORT_TERM=\#\$C500; CALL #ABORT_TERM to discard pending download
+\#UART_WARM=\#\$C572; WARM address for UART TERMINAL
+\#I2C_WARM=\#\$C55C; WARM address for I2C TERMINAL
+
+; See MSP430FRxxxx.pat for other addresses
+
+; ----------------------------------------------
+; Interrupt Vectors and signatures - MSP430FR2433
+; ----------------------------------------------
+FRAM_FULL=\$FF40; 64 bytes are sufficient considering what can be compiled in one line and WORD use.
+SIGNATURES=\$FF80; JTAG/BSL signatures
+JTAG_SIG1=\$FF80; if 0 (electronic fuse=0) enable JTAG/SBW ; reset by wipe and by S1+<reset>
+JTAG_SIG2=\$FF82; if JTAG_SIG <> $FFFF_FFFF|$0000_0000, SBW and JTAG are locked
+BSL_SIG1=\$FF84;
+BSL_SIG2=\$FF86;
+I2CSLA0=\$FFA2; UCBxI2COA0 default value address
+I2CSLA1=\$FFA4; UCBxI2COA1 default value address
+I2CSLA2=\$FFA6; UCBxI2COA2 default value address
+I2CSLA3=\$FFA8; UCBxI2COA3 default value address
+JTAG_PASSWORD=\$FF88; 256 bits
+BSL_PASSWORD=\$FFE0; 256 bits
+VECT_ORG=\$FFDA; FFDA-FFFF
+VECT_LEN=\$26;
+; ----------------------------------------------
+
+P2_VEC=\$FFDA;
+P1_VEC=\$FFDC;
+ADC10_B_VEC=\$FFDE;
+EUSCI_B0_VEC=\$FFE0;
+EUSCI_A1_VEC=\$FFE2;
+EUSCI_A0_VEC=\$FFE4;
+WDT_VEC=\$FFE6;
+RTC_VEC=\$FFE8;
+TA3_X_VEC=\$FFEA;
+TA3_0_VEC=\$FFEC;
+TA2_X_VEC=\$FFEE;
+TA2_0_VEC=\$FFF0;
+TA1_X_VEC=\$FFF2;
+TA1_0_VEC=\$FFF4;
+TA0_X_VEC=\$FFF6;
+TA0_0_VEC=\$FFF8;
+U_NMI_VEC=\$FFFA;
+S_NMI_VEC=\$FFFC;
+RST_VEC=\$FFFE;
+
+
+
+
+; You can check the addresses below by comparing their values in DTCforthMSP430FRxxxx.lst
+; those addresses are usable with the symbolic assembler
+
+
+
+; ----------------------------------------------------------------------
+; MSP430FR2433 Peripheral File Map
+; ----------------------------------------------------------------------
+;SFR_SFR .equ 0100h ; Special function
+;PMM_SFR .equ 0120h ; PMM
+;SYS_SFR .equ 0140h ; SYS
+;CS_SFR .equ 0180h ; Clock System
+;FRAM_SFR .equ 01A0h ; FRAM control
+;CRC16_SFR .equ 01C0h
+;WDT_A_SFR .equ 01CCh ; Watchdog
+;PA_SFR .equ 0200h ; PORT1/2
+;PB_SFR .equ 0220h ; PORT3
+;RTC_SFR .equ 0300h
+;TA0_SFR .equ 0380h
+;TA1_SFR .equ 03C0h
+;TA2_SFR .equ 0400h
+;TA3_SFR .equ 0440h
+;MPY_SFR .equ 04C0h
+;eUSCI_A0_SFR .equ 0500h ; eUSCI_A0
+;eUSCI_A1_SFR .equ 0520h ; eUSCI_A1
+;eUSCI_B0_SFR .equ 0540h ; eUSCI_B0
+;BACK_MEM_SFR .equ 0660h
+;ADC10_B_SFR .equ 0700h
+
+SFRIE1=\$100; \ SFR enable register
+SFRIFG1=\$102; \ SFR flag register
+SFRRPCR=\$104; \ SFR reset pin control
+
+PMMCTL0=\$120; \ PMM Control 0
+PMMCTL1=\$122; \ PMM Control 0
+PMMCTL2=\$124; \ PMM Control 0
+PMMIFG=\$12A; \ PMM interrupt flags
+PM5CTL0=\$130; \ PM5 Control 0
+
+SYSCTL=\$140; \ System control
+SYSBSLC=\$142; \ Bootstrap loader configuration area
+SYSJMBC=\$146; \ JTAG mailbox control
+SYSJMBI0=\$148; \ JTAG mailbox input 0
+SYSJMBI1=\$14A; \ JTAG mailbox input 1
+SYSJMBO0=\$14C; \ JTAG mailbox output 0
+SYSJMBO1=\$14E; \ JTAG mailbox output 1
+SYSUNIV=\$15A; \ User NMI vector generator
+SYSSNIV=\$15C; \ System NMI vector generator
+SYSRSTIV=\$15E; \ Reset vector generator
+SYSCFG0=\$160; \ System configuration 0
+SYSCFG1=\$162; \ System configuration 1
+SYSCFG2=\$164; \ System configuration 2
+
+CSCTL0=\$180; \ CS control 0
+CSCTL1=\$182; \ CS control 1
+CSCTL2=\$184; \ CS control 2
+CSCTL3=\$186; \ CS control 3
+CSCTL4=\$188; \ CS control 4
+CSCTL5=\$18A; \ CS control 5
+CSCTL6=\$18C; \ CS control 6
+CSCTL7=\$18E; \ CS control 7
+CSCTL8=\$190; \ CS control 8
+
+FRCTLCTL0=\$1A0; \ FRAM control 0
+GCCTL0=\$1A4; \ General control 0
+GCCTL1=\$1A6; \ General control 1
+
+CRC16DI=\$1C0; \ CRC data input
+CRCDIRB=\$1C2; \ CRC data input reverse byte
+CRCINIRES=\$1C4; \ CRC initialization and result
+CRCRESR=\$1C6; \ CRC result reverse byte
+
+WDTCTL=\$1CC; \ WDT control register
+
+PAIN=\$200;
+PAOUT=\$202;
+PADIR=\$204;
+PAREN=\$206;
+PASEL0=\$20A;
+PASEL1=\$20C;
+PAIES=\$218;
+PAIE=\$21A;
+PAIFG=\$21C;
+
+P1IN=\$200;
+P1OUT=\$202;
+P1DIR=\$204;
+P1REN=\$206;
+P1SEL0=\$20A;
+P1SEL1=\$20C;
+P1IV=\$20E;
+P1IES=\$218;
+P1IE=\$21A;
+P1IFG=\$21C;
+
+P2IN=\$201;
+P2OUT=\$203;
+P2DIR=\$205;
+P2REN=\$207;
+P2SEL0=\$20B;
+P2SEL1=\$20D;
+P2IES=\$219;
+P2IE=\$21B;
+P2IFG=\$21D;
+P2IV=\$21E;
+
+P3IN=\$220;
+P3OUT=\$222;
+P3DIR=\$224;
+P3REN=\$226;
+P3SEL0=\$22A;
+P3SEL1=\$22C;
+
+RTCCTL=\$300; \ RTC control
+RTCIV=\$304; \ RTC interrupt vector word
+RTCMOD=\$308; \ RTC modulo
+RTCCNT=\$30C; \ RTC counter register
+
+TACLR=4;
+TAIFG=1;
+CCIFG=1;
+
+TA0CTL=\$380; \ TA0 control
+TA0CCTL0=\$382; \ Capture/compare control 0
+TA0CCTL1=\$384; \ Capture/compare control 1
+TA0CCTL2=\$386; \ Capture/compare control 2
+TA0R=\$390; \ TA0 counter register
+TA0CCR0=\$392; \ Capture/compare register 0
+TA0CCR1=\$394; \ Capture/compare register 1
+TA0CCR2=\$396; \ Capture/compare register 2
+TA0EX0=\$3A0; \ TA0 expansion register 0
+TA0IV=\$3AE; \ TA0 interrupt vector
+
+TA1CTL=\$3C0; \ TA1 control
+TA1CCTL0=\$3C2; \ Capture/compare control 0
+TA1CCTL1=\$3C4; \ Capture/compare control 1
+TA1CCTL2=\$3C6; \ Capture/compare control 2
+TA1R=\$3D0; \ TA1 counter register
+TA1CCR0=\$3D2; \ Capture/compare register 0
+TA1CCR1=\$3D4; \ Capture/compare register 1
+TA1CCR2=\$3D6; \ Capture/compare register 2
+TA1EX0=\$3E0; \ TA1 expansion register 0
+TA1IV=\$3EE; \ TA1 interrupt vector
+
+TA2CTL=\$400; \ TA2 control
+TA2CCTL0=\$402; \ Capture/compare control 0
+TA2CCTL1=\$404; \ Capture/compare control 1
+TA2R=\$410; \ TA2 counter register
+TA2CCR0=\$412; \ Capture/compare register 0
+TA2CCR1=\$414; \ Capture/compare register 1
+TA2EX0=\$420; \ TA2 expansion register 0
+TA2IV=\$42E; \ TA2 interrupt vector
+
+TA3CTL=\$440; \ TA3 control
+TA3CCTL0=\$442; \ Capture/compare control 0
+TA3CCTL1=\$444; \ Capture/compare control 1
+TA3R=\$450; \ TA3 counter register
+TA3CCR0=\$452; \ Capture/compare register 0
+TA3CCR1=\$454; \ Capture/compare register 1
+TA3EX0=\$460; \ TA3 expansion register 0
+TA3IV=\$46E; \ TA3 interrupt vector
+
+MPY=\$4C0; \ 16-bit operand 1 - multiply
+MPYS=\$4C2; \ 16-bit operand 1 - signed multiply
+MAC=\$4C4; \ 16-bit operand 1 - multiply accumulate
+MACS=\$4C6; \ 16-bit operand 1 - signed multiply accumulate
+OP2=\$4C8; \ 16-bit operand 2
+RESLO=\$4CA; \ 16 x 16 result low word
+RESHI=\$4CC; \ 16 x 16 result high word
+SUMEXT=\$4CE; \ 16 x 16 sum extension register
+MPY32L=\$4D0; \ 32-bit operand 1 - multiply low word
+MPY32H=\$4D2; \ 32-bit operand 1 - multiply high word
+MPYS32L=\$4D4; \ 32-bit operand 1 - signed multiply low word
+MPYS32H=\$4D6; \ 32-bit operand 1 - signed multiply high word
+MAC32L=\$4D8; \ 32-bit operand 1 - multiply accumulate low word
+MAC32H=\$4DA; \ 32-bit operand 1 - multiply accumulate high word
+MACS32L=\$4DC; \ 32-bit operand 1 - signed multiply accumulate low word
+MACS32H=\$4DE; \ 32-bit operand 1 - signed multiply accumulate high word
+OP2L=\$4E0; \ 32-bit operand 2 - low word
+OP2H=\$4E2; \ 32-bit operand 2 - high word
+RES0=\$4E4; \ 32 x 32 result 0 - least significant word
+RES1=\$4E6; \ 32 x 32 result 1
+RES2=\$4E8; \ 32 x 32 result 2
+RES3=\$4EA; \ 32 x 32 result 3 - most significant word
+MPY32CTL0=\$4EC; \ MPY32 control register 0
+
+
+UCA0CTLW0=\$500; \ eUSCI_A control word 0
+UCA0CTLW1=\$502; \ eUSCI_A control word 1
+UCA0BRW=\$506;
+UCA0BR0=\$506; \ eUSCI_A baud rate 0
+UCA0BR1=\$507; \ eUSCI_A baud rate 1
+UCA0MCTLW=\$508; \ eUSCI_A modulation control
+UCA0STAT=\$50A; \ eUSCI_A status
+UCA0RXBUF=\$50C; \ eUSCI_A receive buffer
+UCA0TXBUF=\$50E; \ eUSCI_A transmit buffer
+UCA0ABCTL=\$510; \ eUSCI_A LIN control
+UCA0IRTCTL=\$512; \ eUSCI_A IrDA transmit control
+UCA0IRRCTL=\$513; \ eUSCI_A IrDA receive control
+UCA0IE=\$51A; \ eUSCI_A interrupt enable
+UCA0IFG=\$51C; \ eUSCI_A interrupt flags
+UCA0IV=\$51E; \ eUSCI_A interrupt vector word
+
+UCA1CTLW0=\$520; \ eUSCI_A control word 0
+UCA1CTLW1=\$522; \ eUSCI_A control word 1
+UCA1BRW=\$526;
+UCA1BR0=\$526; \ eUSCI_A baud rate 0
+UCA1BR1=\$527; \ eUSCI_A baud rate 1
+UCA1MCTLW=\$528; \ eUSCI_A modulation control
+UCA1STAT=\$52A; \ eUSCI_A status
+UCA1RXBUF=\$52C; \ eUSCI_A receive buffer
+UCA1TXBUF=\$52E; \ eUSCI_A transmit buffer
+UCA1ABCTL=\$530; \ eUSCI_A LIN control
+UCA1IRTCTL=\$532; \ eUSCI_A IrDA transmit control
+UCA1IRRCTL=\$533; \ eUSCI_A IrDA receive control
+UCA1IE=\$53A; \ eUSCI_A interrupt enable
+UCA1IFG=\$53C; \ eUSCI_A interrupt flags
+UCA1IV=\$53E; \ eUSCI_A interrupt vector word
+
+UCB0CTLW0=\$540; \ eUSCI_B control word 0
+UCB0CTLW1=\$542; \ eUSCI_B control word 1
+UCB0BRW=\$546;
+UCB0BR0=\$546; \ eUSCI_B bit rate 0
+UCB0BR1=\$547; \ eUSCI_B bit rate 1
+UCB0STATW=\$548; \ eUSCI_B status word
+UCBCNT0=\$549; \ eUSCI_B hardware count
+UCB0TBCNT=\$54A; \ eUSCI_B byte counter threshold
+UCB0RXBUF=\$54C; \ eUSCI_B receive buffer
+UCB0TXBUF=\$54E; \ eUSCI_B transmit buffer
+UCB0I2COA0=\$554; \ eUSCI_B I2C own address 0
+UCB0I2COA1=\$556; \ eUSCI_B I2C own address 1
+UCB0I2COA2=\$558; \ eUSCI_B I2C own address 2
+UCB0I2COA3=\$55A; \ eUSCI_B I2C own address 3
+UCB0ADDRX=\$55C; \ eUSCI_B received address
+UCB0ADDMASK=\$55E; \ eUSCI_B address mask
+UCB0I2CSA=\$560; \ eUSCI I2C slave address
+UCB0IE=\$56A; \ eUSCI interrupt enable
+UCB0IFG=\$56C; \ eUSCI interrupt flags
+UCB0IV=\$56E; \ eUSCI interrupt vector word
+
+UCTXACK=\$20;
+UCTR=\$10;
+
+BAKMEM0=\$660; \ Backup Memory 0
+BAKMEM1=\$662; \ Backup Memory 1
+BAKMEM2=\$664; \ Backup Memory 2
+BAKMEM3=\$666; \ Backup Memory 3
+BAKMEM4=\$668; \ Backup Memory 4
+BAKMEM5=\$66A; \ Backup Memory 5
+BAKMEM6=\$66C; \ Backup Memory 6
+BAKMEM7=\$66E; \ Backup Memory 7
+BAKMEM8=\$670; \ Backup Memory 8
+BAKMEM9=\$672; \ Backup Memory 9
+BAKMEM10=\$674; \ Backup Memory 10
+BAKMEM11=\$676; \ Backup Memory 11
+BAKMEM12=\$678; \ Backup Memory 12
+BAKMEM13=\$67A; \ Backup Memory 13
+BAKMEM14=\$67C; \ Backup Memory 14
+BAKMEM15=\$67E; \ Backup Memory 15
+
+ADC10CTL0=\$700; \ ADC10_B Control register 0
+ADC10CTL1=\$702; \ ADC10_B Control register 1
+ADC10CTL2=\$704; \ ADC10_B Control register 2
+ADC10LO=\$706; \ ADC10_B Window Comparator Low Threshold
+ADC10HI=\$708; \ ADC10_B Window Comparator High Threshold
+ADC10MCTL0=\$70A; \ ADC10_B Memory Control Register 0
+ADC10MEM0=\$712; \ ADC10_B Conversion Memory Register
+ADC10IE=\$71A; \ ADC10_B Interrupt Enable
+ADC10IFG=\$71C; \ ADC10_B Interrupt Flags
+ADC10IV=\$71E; \ ADC10_B Interrupt Vector Word
+
+ADCON=\$10;
+ADCSTART=\$03;
OSDN Git Service
