hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"

[ Upstream commit 9ee8578d953023cc57e7e736ae48502c707c0210 ]

Since commit 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[ commit message spelling fix ]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Unregister chrdev if module initialization fails

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been
registered, unregister the character device. Additionally, avoid
duplicating error path code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ehea: Fix a copy-paste err in ehea_init_port_res

[ Upstream commit c8f191282f819ab4e9b47b22a65c6c29734cefce ]

pr->tx_bytes should be assigned to tx_bytes other than
rx_bytes.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: ce45b873028f ("ehea: Fixing statistics")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios

[ Upstream commit 509c583620e9053e43d611bf1614fc3d3abafa96 ]

The original driver by default defines num_chipselects as -1.
This actually allicates an array of 65535 entries in
of_spi_register_master.

There is a side-effect for buggy device trees that (contrary to
dt-binding documentation) have no cs-gpio defined.

This mode was never supported by the driver due to limitations
of native cs and additional code complexity and is explicitly
not stated to be implemented.

To keep backwards compatibility with such buggy DTs we limit
the number of chip_selects to 1, as for all practical purposes
it is only ever realistic to use a single chip select in
native cs mode without negative side-effects.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/fsl/qe: Fix an error code in qe_pin_request()

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: fix for unpacked mode transfers

[ Upstream commit 1a89ac5b91895127f7c586ec5075c3753ca25501 ]

Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked
mode when transfer length is not a multiple of requested bits per word.

unpacked mode transfers fails when the transfer includes partial bytes in
the last word.

Total words to be written/read to/from FIFO is computed based on transfer
length and bits per word. Unpacked mode includes 0 padding bytes for partial
words to align with bits per word and these extra bytes are also accounted
for calculating bytes left to transfer in the current driver.

This causes extra bytes access of tx/rx buffers along with buffer index
position crossing actual length where remain_len becomes negative and due to
unsigned type, negative value is a 32 bit representation of signed value
and transferred bytes never meets the actual transfer length resulting in
transfer timeout and a hang.

This patch fixes this with proper computation of the actual bytes to fill in
FIFO during transmit and the actual bytes to read from FIFO during receive
ignoring 0 padded bytes.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: clear packed bit for unpacked mode

[ Upstream commit 7b3d10cdf54b8bc1dc0da21faed9789ac4da3684 ]

Fixes: Clear packed bit when not using packed mode.

Packed bit is not cleared when not using packed mode. This results
in transfer timeouts for the unpacked mode transfers followed by the
packed mode transfers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: davinci-isif: avoid uninitialized variable use

[ Upstream commit 0e633f97162c1c74c68e2eb20bbd9259dce87cd9 ]

clang warns about a possible variable use that gcc never
complained about:

drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here
      [-Werror,-Wuninitialized]
                dm365_vpss_set_pg_frame_size(frame_size);
                                             ^~~~~~~~~~
drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here
        struct vpss_pg_frame_size frame_size;
        ^
1 error generated.

There is no initialization for this variable at all, and there
has never been one in the mainline kernel, so we really should
not put that stack data into an mmio register.

On the other hand, I suspect that gcc checks the condition
more closely and notices that the global
isif_cfg.bayer.config_params.test_pat_gen flag is initialized
to zero and never written to from any code path, so anything
depending on it can be eliminated.

To shut up the clang warning, just remove the dead code manually,
it has probably never been used because any attempt to do so
would have resulted in undefined behavior.

Fixes: 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()

[ Upstream commit 7f0d078667a494466991aa7133f49594f32ff6a2 ]

Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made
the call to _enable() conditional based on no oh->rst_lines_cnt. This
caused the return value to be potentially uninitialized. Curiously we see
no compiler warnings for this, probably as this gets inlined.

We call _setup_reset() from _setup() and only _setup_postsetup() if the
return value is zero. Currently the return value can be uninitialized for
cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.

Fixes: 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior")
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mac: Fix VIA timer counter accesses

[ Upstream commit 0ca7ce7db771580433bf24454f7a1542bd326078 ]

This resolves some bugs that affect VIA timer counter accesses.
Avoid lost interrupts caused by reading the counter low byte register.
Make allowance for the fact that the counter will be decremented to
0xFFFF before being reloaded.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: fix bogus variable self-initialization

[ Upstream commit a5fdd713d256887b5f012608701149fa939e5645 ]

A statement was originally added in 2006 to shut up a gcc warning,
now but now clang warns about it:

fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization
      [-Werror,-Wuninitialized]
                pxd_t pxd = pxd;        /* truncated extent of xad */
                      ~~~   ^~~

Modern versions of gcc are fine without the silly assignment, so just
drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9.

Fixes: c9e3ad6021e5 ("JFS: Get rid of "may be used uninitialized" warnings")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx23885: check allocation return

[ Upstream commit a3d7f22ef34ec4206b50ee121384d5c8bebd5591 ]

Checking of kmalloc() seems to have been committed - as
cx23885_dvb_register() is checking for != 0 return, returning
-ENOMEM should be fine here.  While at it address the coccicheck
suggestion to move to kmemdup rather than using kmalloc+memcpy.

Fixes: 46b21bbaa8a8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2")

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: wl128x: Fix an error code in fm_download_firmware()

[ Upstream commit ef4bb63dc1f7213c08e13f6943c69cd27f69e4a3 ]

We forgot to set "ret" on this error path.

Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx18: update *pos correctly in cx18_read_pos()

[ Upstream commit 7afb0df554292dca7568446f619965fb8153085d ]

We should be updating *pos.  The current code is a no-op.

Fixes: 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ivtv: update *pos correctly in ivtv_read_pos()

[ Upstream commit f8e579f3ca0973daef263f513da5edff520a6c0d ]

We had intended to update *pos, but the current code is a no-op.

Fixes: 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sh_eth: fix a missing check of of_get_phy_mode

[ Upstream commit 035a14e71f27eefa50087963b94cbdb3580d08bf ]

of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns NULL of it fails.

Fixes: b356e978e92f ("sh_eth: add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen, cpu_hotplug: Prevent an out of bounds access

[ Upstream commit 201676095dda7e5b31a5e1d116d10fc22985075e ]

The "cpu" variable comes from the sscanf() so Smatch marks it as
untrusted data.  We can't pass a higher value than "nr_cpu_ids" to
cpu_possible() or it results in an out of bounds access.

Fixes: d68d82afd4c8 ("xen: implement CPU hotplugging")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: reduce module load time

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which
waits a minimum of 1 second, even though the FW becomes ready in tens of
millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1
to 1000 due to concern about waiting too long on systems with coarse
jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state

Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nios2: ksyms: Add missing symbol exports

[ Upstream commit 0f8ed994575429d6042cf5d7ef70081c94091587 ]

Building nios2:allmodconfig fails as follows (each symbol is only listed
once).

ERROR: "__ashldi3" [drivers/md/dm-writecache.ko] undefined!
ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined!
ERROR: "__lshrdi3" [drivers/md/dm-zoned.ko] undefined!
ERROR: "flush_icache_range" [drivers/misc/lkdtm/lkdtm.ko] undefined!
ERROR: "empty_zero_page" [drivers/md/dm-mod.ko] undefined!

The problem is seen with gcc 7.3.0.

Export the missing symbols.

Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA

[ Upstream commit c25d47888f0fb3d836d68322d4aea2caf31a75a6 ]

The wm831x_dcdc_ilim entries needs to be uA because it is used to compare
with min_uA and max_uA.
While at it also make the array const and change to use unsigned int.

Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ]

MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
perform low-level platform initialization. This results in a try to install
HYP stubs for the second time for each CPU and results in false HYP/SVC
mode mismatch detection. The HYP stubs are already installed at the
beginning of the kernel initialization on the boot CPU (head.S) or in the
secondary_startup() for other CPUs. To fix this issue MCPM code should use
a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
XU3/XU4/HC1 boards.

Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable

[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ]

If the clock tree is not fully populated when the timer-sun5i init code
is called, attempts to get the clock rate for the timer would fail and
return 0.

Make the init code for both clock events and clocksource check the
returned clock rate and fail gracefully if the result is 0, instead of
causing a divide by 0 exception later on.

Fixes: 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/nfs: Fix nfs_parse_devname to not modify it's argument

[ Upstream commit 40cc394be1aa18848b8757e03bd8ed23281f572e ]

In the rare and unsupported case of a hostname list nfs_parse_devname
will modify dev_name.  There is no need to modify dev_name as the all
that is being computed is the length of the hostname, so the computed
length can just be shorted.

Fixes: dc04589827f7 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the
loop of for_each_child_of_node() in the error path.  Not only the
iterator node of for_each_child_of_node(), the children nodes referred
from it for codec and cpu have to be properly unreferenced.

Fixes: bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/pmu: don't print reply values if exec is false

[ Upstream commit b1d03fc36ec9834465a08c275c8d563e07f6f6bf ]

Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.

Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON

[ Upstream commit 13649101a25c53c87f4ab98a076dfe61f3636ab1 ]

Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator.  I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.

[ Note, not tested ]

Detected by CoveritScan, CID#1324005 ("Operands don't affect result")

Fixes: c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cdc-wdm: pass return value of recover_from_urb_loss

[ Upstream commit 0742a338f5b3446a26de551ad8273fb41b2787f2 ]

'rv' is the correct return value, pass it upstream instead of 0

Fixes: 17d80d562fd7 ("USB: autosuspend for cdc-wdm")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio_pci: Enable memory accesses before calling pci_map_rom

[ Upstream commit 0cfd027be1d6def4a462cdc180c055143af24069 ]

pci_map_rom/pci_get_rom_size() performs memory access in the ROM.
In case the Memory Space accesses were disabled, readw() is likely
to trigger a synchronous external abort on some platforms.

In case memory accesses were disabled, re-enable them before the
call and disable them back again just after.

Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: don't use bio->bi_vcnt to figure out segment number

[ Upstream commit 1a67356e9a4829da2935dd338630a550c59c8489 ]

It is wrong to use bio->bi_vcnt to figure out how many segments
there are in the bio even though CLONED flag isn't set on this bio,
because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't
cause any performance loss now because the physical segment number is figured
out in blk_queue_split() and BIO_SEG_VALID is set meantime since
bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting").

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups

[ Upstream commit 0e6e448bdcf896d001a289a6112a704542d51516 ]

There are two pin groups for the FSIC SPDIF signal, but the FSIC pin
group array lists only one, and it refers to a nonexistent group.

Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group

[ Upstream commit a4b0350047f1b10207e25e72d7cd3f7826e93769 ]

The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a
typo, thus the group cannot be selected.

Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: emev2: Add missing pinmux functions

[ Upstream commit 1ecd8c9cb899ae277e6986ae134635cb1a50f5de ]

The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present,
but no pinmux functions refer to them, hence they can not be selected.

Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: chipsfb: remove set but not used variable 'size'

[ Upstream commit 8e71fa5e4d86bedfd26df85381d65d6b4c860020 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/fbdev/chipsfb.c:352:22: warning:
 variable 'size' set but not used [-Wunused-but-set-variable]

Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
[b.zolnierkie: minor commit summary and description fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pm8xxx: fix unintended sign extension

[ Upstream commit e42280886018c6f77f0a90190f7cba344b0df3e0 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm80x: fix unintended sign extension

[ Upstream commit fb0b322537a831b5b0cb948c56f8f958ce493d3a ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")

Fixes: 2985c29c1964 ("rtc: Add rtc support to 88PM80X PMIC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm860x: fix unintended sign extension

[ Upstream commit dc9e47160626cdb58d5c39a4f43dcfdb27a5c004 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes: 008b30408c40 ("mfd: Add rtc support to 88pm860x")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: ds1672: fix unintended sign extension

[ Upstream commit f0c04c276739ed8acbb41b4868e942a55b128dca ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#138801 ("Unintended sign extension")

Fixes: edf1aaa31fc5 ("[PATCH] RTC subsystem: DS1672 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: ipwireless: Fix potential NULL pointer dereference

[ Upstream commit 7dd50e205b3348dc7784efbdf85723551de64a25 ]

There is a potential NULL pointer dereference in case
alloc_ctrl_packet() fails and returns NULL.

Fixes: 099dc4fb6265 ("ipwireless: driver for PC Card 3G/UMTS modem")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: cmos: ignore bogus century byte

[ Upstream commit 2a4daadd4d3e507138f8937926e6a4df49c6bfdc ]

Older versions of Libreboot and Coreboot had an invalid value
(`3' in my case) in the century byte affecting the GM45 in
the Thinkpad X200.  Not everybody's updated their firmwares,
and Linux <= 4.2 was able to read the RTC without problems,
so workaround this by ignoring invalid values.

Fixes: 3c217e51d8a272b9 ("rtc: cmos: century support")

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sylvain Chouleur <sylvain.chouleur@intel.com>
Cc: Patrick McDermott <patrick.mcdermott@libiquity.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-sgtl5000: put of nodes if finding codec fails

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec
fails.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: tgr192 - fix unaligned memory access

[ Upstream commit f990f7fb58ac8ac9a43316f09a48cff1a49dda42 ]

Fix an unaligned memory access in tgr192_transform() by using the
unaligned access helpers.

Fixes: 06ace7a9bafe ("[CRYPTO] Use standard byte order macros wherever possible")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]

This commit corrects max and step values for v4l2 control for
V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1.
It was found by using v4l2-compliance tool and checking result of
VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference
between max and min.

Fixes: 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")

Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/ocrdma: Fix out of bounds index check in query pkey

[ Upstream commit b188940796c7be31c1b8c25a9a0e0842c2e7a49e ]

The pkey table size is one element, index should be tested for > 0 instead
of > 1.

Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/usnic: Fix out of bounds index check in query pkey

[ Upstream commit 4959d5da5737dd804255c75b8cea0a2929ce279a ]

The pkey table size is one element, index should be tested for > 0 instead
of > 1.

Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: armada-xp: fix refcount leak in axp_clk_init()

[ Upstream commit db20a90a4b6745dad62753f8bd2f66afdd5abc84 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes: 0a11a6ae9437 ("clk: mvebu: armada-xp: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: kirkwood: fix refcount leak in kirkwood_clk_init()

[ Upstream commit e7beeab9c61591cd0e690d8733d534c3f4278ff8 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes: 58d516ae95cb ("clk: mvebu: kirkwood: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: armada-370: fix refcount leak in a370_clk_init()

[ Upstream commit a3c24050bdf70c958a8d98c2823b66ea761e6a31 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes: 07ad6836fa21 ("clk: mvebu: armada-370: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: vf610: fix refcount leak in vf610_clocks_init()

[ Upstream commit 567177024e0313e4f0dcba7ba10c0732e50e655d ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 1f2c5fd5f048 ("ARM: imx: add VF610 clock support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx7d: fix refcount leak in imx7d_clocks_init()

[ Upstream commit 5f8c183a996b76bb09748073c856e4246fd4ce95 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 8f6d8094b215 ("ARM: imx: add imx7d clk tree support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx6sx: fix refcount leak in imx6sx_clocks_init()

[ Upstream commit 1731e14fb30212dd8c1e9f8fc1af061e56498c55 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: d55135689019 ("ARM: imx: add clock driver for imx6sx")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx6q: fix refcount leak in imx6q_clocks_init()

[ Upstream commit c9ec1d8fef31b5fc9e90e99f9bd685db5caa7c5e ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 2acd1b6f889c ("ARM: i.MX6: implement clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()

[ Upstream commit cee82eb9532090cd1dc953e845d71f9b1445c84e ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: socfpga: fix refcount leak

[ Upstream commit 7f9705beeb3759e69165e7aff588f6488ff6c1ac ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 5343325ff3dd ("clk: socfpga: add a clock driver for the Arria 10 platform")
Fixes: a30d27ed739b ("clk: socfpga: fix clock driver for 3.15")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qoriq: fix refcount leak in clockgen_init()

[ Upstream commit 70af6c5b5270e8101f318c4b69cc98a726edfab9 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: highbank: fix refcount leak in hb_clk_init()

[ Upstream commit 5eb8ba90958de1285120dae5d3a5d2b1a360b3b4 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 26cae166cff9 ("ARM: highbank: remove custom .init_time hook")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: nomadik-ske-keypad - fix a loop timeout test

[ Upstream commit 4d8f727b83bcd6702c2d210330872c9122d2d360 ]

The loop exits with "timeout" set to -1 not to 0.

Fixes: 1158f0f16224 ("Input: add support for Nomadik SKE keypad controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value

[ Upstream commit 4d374bacd7c9665179f9752a52d5d602c45d8190 ]

The IP10[5:3] field in Peripheral Function Select Register 10 has a
width of 3 bits, i.e. it allows programming one out of 8 different
configurations.
However, 9 values are provided instead of 8, overflowing into the
subsequent field in the register, and thus breaking the configuration of
the latter.

Fix this by dropping a bogus zero value.

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field

[ Upstream commit 9540cbdfcd861caf67a6f0e4bb7f46d41c4aad86 ]

The Port C I/O Register 0 contains 7 reserved bits, but the descriptor
contains only dummy configuration values for 6 reserved bits, thus
breaking the configuration of all subsequent fields in the register.

Fix this by adding the two missing configuration values.

Fixes: f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7734: Add missing IPSR11 field

[ Upstream commit 94482af7055e1ffa211c1135256b85590ebcac99 ]

The Peripheral Function Select Register 11 contains 3 reserved bits and
15 variable-width fields, but the variable field descriptor does not
contain the 3-bit field IP11[25:23].

Fixes: 856cb4bb337ee504 ("sh: Add support pinmux for SH7734")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field

[ Upstream commit 6a6c195d98a1a5e70faa87f594d7564af1dd1bed ]

The Peripheral Function Select Register 9 contains 12 fields, but the
variable field descriptor contains a 13th bogus field of 3 bits.

Fixes: 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group

[ Upstream commit 124cde98f856b6206b804acbdec3b7c80f8c3427 ]

The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the
tpu4_to3_pins[] array lacks the corresponding pin number.

Add the missing pin number, for non-GPIO pin F26.

Fixes: 5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group

[ Upstream commit 0d6256cb880166a4111bebce35790019e56b6e1b ]

The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of
the color components.  The vin1_b_data18_pins[] array rightfully does
not include the corresponding pin numbers, as RGB18 is subset of RGB24,
containing only the 6 MSB bits of each component.

Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group

[ Upstream commit 884fa25fb6e5e63ab970d612a628313bb68f37cc ]

The qspi_data4_b_mux[] array contains pin marks for the clock and chip
select pins.  The qspi_data4_b_pins[] array rightfully does not contain
the corresponding pin numbers, as the control pins are provided by a
separate group (qspi_ctrl_b).

Fixes: 2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group

[ Upstream commit 96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ]

The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers,
but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.

Fixes: 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group

[ Upstream commit 1ebc589a7786f17f97b9e87b44e0fb4d0290d8f8 ]

The gether_gmii_mux[] array contains the REF125CK pin mark, but the
gether_gmii_pins[] array lacks the corresponding pin number.

Fixes: bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp_mst: Skip validating ports during destruction, just ref

[ Upstream commit c54c7374ff44de5e609506aca7c0deae4703b6d1 ]

Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I
accidentally introduced into DRM two years ago.

Pretend we have a topology like this:

|- DP-1: mst_primary
   |- DP-4: active display
   |- DP-5: disconnected
   |- DP-6: active hub
      |- DP-7: active display
      |- DP-8: disconnected
      |- DP-9: disconnected

If we unplug DP-6, the topology starting at DP-7 will be destroyed but
it's payloads will live on in DP-1's VCPI allocations and thus require
removal. However, this removal currently fails because
drm_dp_update_payload_part1() will (rightly so) try to validate the port
before accessing it, fail then abort. If we keep going, eventually we
run the MST hub out of bandwidth and all new allocations will start to
fail (or in my case; all new displays just start flickering a ton).

We could just teach drm_dp_update_payload_part1() not to drop the port
ref in this case, but then we also need to teach
drm_dp_destroy_payload_step1() to do the same thing, then hope no one
ever adds anything to the that requires a validated port reference in
drm_dp_destroy_connector_work(). Kind of sketchy.

So let's go with a more clever solution: any port that
drm_dp_destroy_connector_work() interacts with is guaranteed to still
exist in memory until we say so. While said port might not be valid we
don't really care: that's the whole reason we're destroying it in the
first place! So, teach drm_dp_get_validated_port_ref() to use the all
mighty current_work() function to avoid attempting to validate ports
from the context of mgr->destroy_connector_work. I can't see any
situation where this wouldn't be safe, and this avoids having to play
whack-a-mole in the future of trying to work around port validation.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Reported-by: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exportfs: fix 'passing zero to ERR_PTR()' warning

[ Upstream commit 909e22e05353a783c526829427e9a8de122fba9c ]

Fix a static code checker warning:
  fs/exportfs/expfs.c:171 reconnect_one() warn: passing zero to 'ERR_PTR'

The error path for lookup_one_len_unlocked failure
should set err to PTR_ERR.

Fixes: bbf7a8a3562f ("exportfs: move most of reconnect_path to helper function")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcrypt: use format specifier in kobject_add

[ Upstream commit b1e3874c75ab15288f573b3532e507c37e8e7656 ]

Passing string 'name' as the format specifier is potentially hazardous
because name could (although very unlikely to) have a format specifier
embedded in it causing issues when parsing the non-existent arguments
to these.  Follow best practice by using the "%s" format string for
the string 'name'.

Cleans up clang warning:
crypto/pcrypt.c:397:40: warning: format string is not a string literal
(potentially insecure) [-Wformat-security]

Fixes: a3fb1e330dd2 ("pcrypt: Added sysfs interface to pcrypt")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: comedi: ni_mio_common: protect register write overflow

[ Upstream commit 1cbca5852d6c16e85a21487a15d211195aacd4a1 ]

Fixes two problems introduced as early as
commit 03aef4b6dc12  ("Staging: comedi: add ni_mio_common code"):
(1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is
    not unduly overwritten on e-series devices.  On e-series devices, the
    first three of the last four bits are reserved.  The last bit defines
    the output selection of the RGOUT0 pin, otherwise known as
    RTSI_Sub_Selection.  For m-series devices, these last four bits are
    indeed used as the output selection of the RTSI7 pin (and the
    RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the
    RTSI_Trig_Direction register.
(2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI
    lines.

This patch also cleans up the ni_get_rtsi_routing command for readability.

Fixes: 03aef4b6dc12  ("Staging: comedi: add ni_mio_common code")
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: update quirk for B&W PX to remove microphone

[ Upstream commit c369c8db15d51fa175d2ba85928f79d16af6b562 ]

A quirk in snd-usb-audio was added to automate setting sample rate to
4800k and remove the previously exposed nonfunctional microphone for
the Bowers & Wilkins PX:
commit 240a8af929c7c57dcde28682725b29cf8474e8e5
https://lore.kernel.org/patchwork/patch/919689/

However the headphones where updated shortly after that to remove the
unintentional microphone functionality. I guess because of this the
headphones now crash when connecting them via USB while the quirk is
active. Dmesg:

snd-usb-audio: probe of 2-3:1.0 failed with error -22
usb 2-3: 2:1: cannot get min/max values for control 2 (id 2)

This patch removes the microfone and allows the headphones to connect
and work out of the box. It is based on the current mainline kernel
 and successfully applied an tested on my machine (4.18.10.arch1-1).

Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
Signed-off-by: Nicolas Huaman <nicolas@herochao.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: fix unused variable warning

[ Upstream commit 5b03006d5c58ddd31caf542eef4d0269bcf265b3 ]

When CONFIG_X86=n function azx_snoop doesn't use the variable chip it
only returns true.

sound/pci/hda/hda_intel.c: In function ‘dma_alloc_pages’:
sound/pci/hda/hda_intel.c:2002:14: warning: unused variable ‘chip’ [-Wunused-variable]
  struct azx *chip = bus_to_azx(bus);
              ^~~~

Create a inline function of azx_snoop.

Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()

[ Upstream commit 09c4b49457434fa74749ad6194ef28464d9f5df9 ]

This doesn't affect runtime because in the current code "idx" is always
valid.

First, we read from "vgdev->capsets[idx].max_size" before checking
whether "idx" is within bounds.  And secondly the bounds check is off by
one so we could end up reading one element beyond the end of the
vgdev->capsets[] array.

Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180704094250.m7sgvvzg3dhcvv3h@kili.mountain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt7601u: fix bbp version check in mt7601u_wait_bbp_ready

commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 upstream.

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by
coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use
of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/archrandom: fix arch_get_random_seed_int()

commit b6afd1234cf93aa0d71b4be4788c47534905f0be upstream.

Commit 01c9348c7620ec65

  powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware
RNG backing to arch_get_random_seed_[int|long]() instead. However, it
failed to take into account that arch_get_random_int() was implemented
in terms of arch_get_random_long(), and so we ended up with a version
of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from
arch_get_random_seed_int() instead.

Fixes: 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204115015.18015-1-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: Sanity check flags of Q_XQUOTARM call

commit 3dd4d40b420846dd35869ccc8f8627feef2cff32 upstream.

Flags passed to Q_XQUOTARM were not sanity checked for invalid values.
Fix that.

Fixes: 9da93f9b7cdf ("xfs: fix Q_XQUOTARM ioctl")
Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.211

regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id

commit 458ea3ad033fc86e291712ce50cbe60c3428cf30 upstream.

Those regulators are not actually supported by the AB8500 regulator
driver. There is no ab8500_regulator_info for them and no entry in
ab8505_regulator_match.

As such, they cannot be registered successfully, and looking them
up in ab8505_regulator_match causes an out-of-bounds array read.

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix wrong address verification

commit 07d369857808b7e8e471bbbbb0074a6718f89b31 upstream.

Since there are some DIE which has only ranges instead of the
combination of entrypc/highpc, address verification must use
dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc.

Also, the ranges only DIE will have a partial code in different section
(e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In
that case, we can not use dwarf_entrypc() or die_entrypc(), because the
offset from original DIE can be a minus value.

Instead, this simply gets the symbol and offset from symtab.

Without this patch;

  # perf probe -D clear_tasks_mm_cpumask:1
  Failed to get entry address of clear_tasks_mm_cpumask
    Error: Failed to add events.

And with this patch:

  # perf probe -D clear_tasks_mm_cpumask:1
  p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0
  p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5
  p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8
  p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16
  p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82

Committer testing:

I managed to reproduce the above:

  [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1
  p:probe/clear_tasks_mm_cpumask _text+919968
  p:probe/clear_tasks_mm_cpumask_1 _text+919973
  p:probe/clear_tasks_mm_cpumask_2 _text+919976
  [root@quaco ~]#

But then when trying to actually put the probe in place, it fails if I
use :0 as the offset:

  [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5
  <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0>
        0  void clear_tasks_mm_cpumask(int cpu)
        1  {
        2   struct task_struct *p;

  [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
  Probe point 'clear_tasks_mm_cpumask' not found.
    Error: Failed to add events.
  [root@quaco

The next patch is needed to fix this case.

Fixes: 576b523721b7 ("perf probe: Fix probing symbols with optimization suffix")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: scsi_trace: Use get_unaligned_be*()

commit b1335f5b0486f61fb66b123b40f8e7a98e49605d upstream.

This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an
integer. If the top bit of the u8 is set then the following conversion to
an u64 will sign extend the value causing the upper 32 bits to be set in
the result."

Fix this by using get_unaligned_be*() instead.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.org
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: core: Fix a pr_debug() argument

commit c941e0d172605731de9b4628bd4146d35cf2e7d6 upstream.

Print the string for which conversion failed instead of printing the
function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to the core")
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bnx2i: fix potential use after free

commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 upstream.

The member hba->pcidev may be used after its reference is dropped. Move the
put function to where it is never used to avoid potential use after free
issues.

Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla4xxx: fix double free bug

commit 3fe3d2428b62822b7b030577cd612790bdd8c941 upstream.

The variable init_fw_cb is released twice, resulting in a double free
bug. The call to the function dma_free_coherent() before goto is removed to
get rid of potential double free.

Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.")
Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: esas2r: unlock on error in esas2r_nvram_read_direct()

commit 906ca6353ac09696c1bf0892513c8edffff5e0a6 upstream.

This error path is missing an unlock.

Fixes: 26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
Link: https://lore.kernel.org/r/20191022102324.GA27540@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: check for set_wiphy_params

commit 24953de0a5e31dcca7e82c8a3c79abc2dfe8fb6e upstream.

Check if set_wiphy_params is assigned and return an error if not,
some drivers (e.g. virt_wifi where syzbot reported it) don't have
it.

Reported-by: syzbot+e8a797964a4180eb57d5@syzkaller.appspotmail.com
Reported-by: syzbot+34b582cf32c1db008f8e@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cw1200: Fix a signedness bug in cw1200_load_firmware()

commit 4a50d454502f1401171ff061a5424583f91266db upstream.

The "priv->hw_type" is an enum and in this context GCC will treat it
as an unsigned int so the error handling will never trigger.

Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk

commit 589b72894f53124a39d1bb3c0cecaf9dcabac417 upstream.

Clang warns:

../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                nr_parts = PARTS_PER_DISK;
                ^
../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here
                if (err)
                ^

This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.

While we are here, the previous line has some trailing whitespace; clean
that up as well.

Fixes: c80a420995e7 ("xen-blkfront: handle Xen major numbers other than XENVBD")
Link: https://github.com/ClangBuiltLinux/linux/issues/791
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: lan78xx: limit size of local TSO packets

[ Upstream commit f8d7408a4d7f60f8b2df0f81decdc882dd9c20dc ]

lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE
bytes in the aggregated packets it builds, but does
nothing to prevent large GSO packets being submitted.

Pierre-Francois reported various hangs when/if TSO is enabled.

For localy generated packets, we can use netif_set_gso_max_size()
to limit the size of TSO packets.

Note that forwarded packets could still hit the issue,
so a complete fix might require implementing .ndo_features_check
for this driver, forcing a software segmentation if the size
of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix marked lost packets not being retransmitted

[ Upstream commit e176b1ba476cf36f723cfcc7a9e57f3cb47dec70 ]

When the packet pointed to by retransmit_skb_hint is unlinked by ACK,
retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue().
If packet loss is detected at this time, retransmit_skb_hint will be set
to point to the current packet loss in tcp_verify_retransmit_hint(),
then the packets that were previously marked lost but not retransmitted
due to the restriction of cwnd will be skipped and cannot be
retransmitted.

To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can
be reset only after all marked lost packets are retransmitted
(retrans_out >= lost_out), otherwise we need to traverse from
tcp_rtx_queue_head in tcp_xmit_retransmit_queue().

Packetdrill to demonstrate:

// Disable RACK and set max_reordering to keep things simple
    0 `sysctl -q net.ipv4.tcp_recovery=0`
   +0 `sysctl -q net.ipv4.tcp_max_reordering=3`

// Establish a connection
   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

  +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
 +.01 < . 1:1(0) ack 1 win 257
   +0 accept(3, ..., ...) = 4

// Send 8 data segments
   +0 write(4, ..., 8000) = 8000
   +0 > P. 1:8001(8000) ack 1

// Enter recovery and 1:3001 is marked lost
 +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop>
   +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop>
   +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop>

// Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001
   +0 > . 1:1001(1000) ack 1

// 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL
 +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop>
// Now retransmit_skb_hint points to 4001:5001 which is now marked lost

// BUG: 2001:3001 was not retransmitted
   +0 > . 2001:3001(1000) ack 1

Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: add missing endpoint sanity check

[ Upstream commit 86f3f4cd53707ceeec079b83205c8d3c756eca93 ]

Add missing endpoint sanity check to probe in order to prevent a
NULL-pointer dereference (or slab out-of-bounds access) when retrieving
the interrupt-endpoint bInterval on ndo_open() in case a device lacks
the expected endpoints.

Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer")
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()

[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ]

I missed the fact that macvlan_broadcast() can be used both
in RX and TX.

skb_eth_hdr() makes only sense in TX paths, so we can not
use it blindly in macvlan_broadcast()

Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jurgen Van Ham <juvanham@gmail.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Fix DAT candidate selection on little endian systems

commit 4cc4a1708903f404d2ca0dfde30e71e052c6cbc9 upstream.

The distributed arp table is using a DHT to store and retrieve MAC address
information for an IP address. This is done using unicast messages to
selected peers. The potential peers are looked up using the IP address and
the VID.

While the IP address is always stored in big endian byte order, this is not
the case of the VID. It can (depending on the host system) either be big
endian or little endian. The host must therefore always convert it to big
endian to ensure that all devices calculate the same peers for the same
lookup data.

Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: fix a use-after-free in mtype_destroy()

commit c120959387efa51479056fd01dc90adfba7a590c upstream.

map->members is freed by ip_set_free() right before using it in
mtype_ext_cleanup() again. So we just have to move it down.

Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com
Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function")
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: agilex/stratix10: fix pmu interrupt numbers

[ Upstream commit 210de0e996aee8e360ccc9e173fe7f0a7ed2f695 ]

Fix up the correct interrupt numbers for the PMU unit on Agilex
and Stratix10.

Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: fix invalid stack access

[ Upstream commit 42ec15ceaea74b5f7a621fc6686cbf69ca66c4cf ]

gcc -O3 warns that some local variables are not properly initialized:

drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[0] = *a0;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
  u64 a0, a1;
      ^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~

Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.

Use an array of two u64 variables where needed to make it work correctly.

I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.

Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: use kernel's '%pM' format option to print MAC

[ Upstream commit 36fe90b0f0bdc9d030e88ba2153f3c8d6b6a5964 ]

Instead of supplying each byte through stack let's use %pM specifier.

Cc: Hiral Patel <hiralpat@cisco.com>
Cc: Suma Ramars <sramars@cisco.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: keyspan: handle unbound ports

[ Upstream commit 3018dd3fa114b13261e9599ddb5656ef97a1fa17 ]

Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).

Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: io_edgeport: handle unbound ports on URB completion

[ Upstream commit e37d1aeda737a20b1846a91a3da3f8b0f00cf690 ]

Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: io_edgeport: use irqsave() in USB's complete callback

[ Upstream commit dd1fae527612543e560e84f2eba4f6ef2006ac55 ]

The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Enable 16KB buffer size

commit b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream.

XGMAC supports maximum MTU that can go to 16KB. Lets add this check in
the calculation of RX buffer size.

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>