OSDN Git Service
Jesse Hall [Wed, 6 Nov 2013 15:35:08 +0000 (15:35 +0000)]
Merge "Don't use implementation-defined format with CPU consumers" into klp-dev
Jesse Hall [Tue, 5 Nov 2013 00:43:03 +0000 (16:43 -0800)]
Don't use implementation-defined format with CPU consumers
If the virtual display surface is being consumed by the CPU, it can't
be allowed with HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED since there is
no way for the CPU consumer to find out what format gralloc chose. So
for CPU-consumer surfaces, just use the BufferQueue's default format,
which can be set by the consumer.
A better but more invasive change would be to let the consumer require
a certain format (or set of formats?), and disallow the producer from
requesting a different format.
Bug:
11479817
Change-Id: I5b20ee6ac1146550e8799b806e14661d279670c0
Jamie Gennis [Mon, 4 Nov 2013 22:47:31 +0000 (22:47 +0000)]
Merge "DispSync: remove delay when enabling vsync events" into klp-dev
Jamie Gennis [Tue, 29 Oct 2013 20:36:12 +0000 (13:36 -0700)]
DispSync: remove delay when enabling vsync events
This change fixes a bug that caused an extra frame of latency when enabling
vsync event callbacks in DispSync. The bug was related to the logic that
prevents the two events from firing with very little time between them due to
updates to the vsync model.
Bug:
11479720
Change-Id: Ie7eaff9e92ffb7b7b6cb4d3d4402c96cbd29af7e
Igor Murashkin [Wed, 30 Oct 2013 21:09:39 +0000 (21:09 +0000)]
Merge "EGL: rename CallStack::dump into CallStack::log" into klp-dev
Igor Murashkin [Sat, 26 Oct 2013 00:13:57 +0000 (17:13 -0700)]
EGL: rename CallStack::dump into CallStack::log
Bug:
11324229
Change-Id: Ibac1be182c336e7aa5ac098f08d18b3c188964b4
Aravind Akella [Fri, 25 Oct 2013 23:16:59 +0000 (23:16 +0000)]
Merge "Bug fixes for SensorService" into klp-dev
Aravind Akella [Tue, 15 Oct 2013 22:43:10 +0000 (15:43 -0700)]
Bug fixes for SensorService
i) Emulate Flush for AOSP Fusion Sesnsors on newer HALs that support batching.
ii) Early return if there are no events for the current SensorEventConnection.
Bug:
11325707,
11376538
Change-Id: Idb856302463649a99d3d5d0c965bb06ba06b8e1d
Marco Nelissen [Wed, 16 Oct 2013 17:57:51 +0000 (10:57 -0700)]
Native counterpart of new power manager method
Cherrypicked from master.
b/
9464621
Change-Id: I54c0ed50a57ac870da91db8589a73a2c792dbd8d
Jesse Hall [Fri, 25 Oct 2013 17:44:41 +0000 (10:44 -0700)]
Fix handling of undefined TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS
related to b/
8316155 - Implement HWComposer 1.3 w/ virtual display support
Change-Id: I2dc8d65a74174aa833cc491264f97f1f2df49307
Jesse Hall [Wed, 23 Oct 2013 22:12:54 +0000 (22:12 +0000)]
Merge "Add a boardconfig to force HWC composition of virtual displays" into klp-dev
Jesse Hall [Wed, 23 Oct 2013 22:12:37 +0000 (22:12 +0000)]
Merge "Use implementation-defined format when HWC writes to output buffer" into klp-dev
Michael Wright [Mon, 21 Oct 2013 19:05:22 +0000 (12:05 -0700)]
Only consume touches up until the frame time
When resampling is disabled, it's currently possible to consume
touches after the current frame time. This breaks some guarantees and
could cause unexpected behaviors.
Change-Id: I99908a2cac2df9f795dd4a07188b4451213cf3e4
Andy McFadden [Fri, 18 Oct 2013 22:50:24 +0000 (15:50 -0700)]
Wait for buffers to drain
When a BufferQueue producer disconnects and reconnects, we retain
the previously-queued buffers but empty the slots. This allows
the number of queued buffers to grow without limit. The low-memory
killer does not approve.
Bug
11069934
Change-Id: Ia2eaa954c7a3904b54209a3701dba01689e204d8
Naseer Ahmed [Fri, 4 Oct 2013 20:15:22 +0000 (16:15 -0400)]
Add a boardconfig to force HWC composition of virtual displays
When this boardconfig is defined, even when all virtual display
composition is done by GLES, the HWC will be forced to copy from the
GLES framebuffer to the output buffer. On some hardware this allows
HWC to do format conversions that would otherwise have to be done by
the consumer, with worse power and/or performance.
Bug:
8316155
Change-Id: If980ecc589f138cef063eafa757f7f748196713e
Jesse Hall [Fri, 27 Sep 2013 16:05:09 +0000 (09:05 -0700)]
Use implementation-defined format when HWC writes to output buffer
When GLES isn't writing to the output buffer directly, request an
implementation-defined format with minimal usage flags, leaving the
format choice up to gralloc. On some hardware this allows HWC to do
format conversions during composition that would otherwise need to be
done (with worse power and/or performance) by the consumer.
Bug:
8316155
Change-Id: Iee6ee8404282036f9fd1833067cfe11dbadbf0bf
Ed Heyl [Thu, 17 Oct 2013 00:43:06 +0000 (17:43 -0700)]
merge in klp-release (no-op)
The Android Automerger [Wed, 16 Oct 2013 04:14:09 +0000 (21:14 -0700)]
merge in klp-release history after reset to klp-dev
The Android Automerger [Tue, 15 Oct 2013 22:55:41 +0000 (15:55 -0700)]
merge in klp-release history after reset to klp-dev
Jamie Gennis [Tue, 15 Oct 2013 03:52:46 +0000 (20:52 -0700)]
SurfaceFlinger: give SF its own vsync phase
This change allows SurfaceFlinger to run at a different vsync phase offset from
that used by external listeners.
Bug:
11175503
Change-Id: I561c53a5659fa6dc1e3e4ae30340f3c1a6adceb4
Jamie Gennis [Mon, 14 Oct 2013 19:22:52 +0000 (12:22 -0700)]
SurfaceFlinger: Add EventControlThread
This change adds a new thread for calling HWComposer's eventControl
asynchronously. The DispSync-based vsync approach ends up enabling and
disabling HWComposer's vsync callbacks at arbitrary times, and some HWComposer
implementations do not have these calls optimized.
Bug:
11175503
Change-Id: I719be82bd200b391c61d40863b991c7b59acdfd6
Jesse Hall [Tue, 15 Oct 2013 19:53:10 +0000 (19:53 +0000)]
Merge "Disable hardware vsync when blanking the screen" into klp-dev
Aravind Akella [Tue, 15 Oct 2013 17:01:55 +0000 (17:01 +0000)]
Merge "SensorService Flush API bug fix." into klp-dev
The Android Automerger [Tue, 15 Oct 2013 13:00:54 +0000 (06:00 -0700)]
merge in klp-release history after reset to klp-dev
Aravind Akella [Tue, 15 Oct 2013 00:04:42 +0000 (17:04 -0700)]
SensorService Flush API bug fix.
SensorService is dead locking itself when flush is called on older devices which don't support batching. mConnectionLock is acquired twice.
Change-Id: I5c25585bfb2b396df4b05826a9cba1da7997a3ee
Jesse Hall [Mon, 14 Oct 2013 19:56:09 +0000 (12:56 -0700)]
Disable hardware vsync when blanking the screen
Bug:
11220224
Change-Id: I99d0a42e1a6bb0aaf89706f6d100e9ef2a5deaa4
Jesse Hall [Mon, 14 Oct 2013 19:36:45 +0000 (12:36 -0700)]
Filter out vsync events from HWC with duplicate timestamps
Bug:
11220224
Change-Id: I4efe0b66ea8969bf0ec3c4fcb325d354c8a0c315
The Android Automerger [Mon, 14 Oct 2013 02:20:31 +0000 (19:20 -0700)]
merge in klp-release history after reset to klp-dev
Aravind Akella [Sun, 13 Oct 2013 22:47:47 +0000 (22:47 +0000)]
Merge "Adding PackageManager feature strings for stepcounter and stepdetector." into klp-dev
Aravind Akella [Sun, 13 Oct 2013 00:30:40 +0000 (17:30 -0700)]
Adding PackageManager feature strings for stepcounter and stepdetector.
Change-Id: I75ec21900fdc3ea80b61ec12c851a0c5ce9c44e8
Jesse Hall [Sun, 13 Oct 2013 20:13:59 +0000 (20:13 +0000)]
Merge "DispSync: don't compensate for wakeup latency" into klp-dev
The Android Automerger [Sun, 13 Oct 2013 13:02:02 +0000 (06:02 -0700)]
merge in klp-release history after reset to klp-dev
Andy McFadden [Fri, 11 Oct 2013 21:39:49 +0000 (21:39 +0000)]
Merge "Use black for blackout layer" into klp-dev
Aravind Akella [Tue, 8 Oct 2013 21:59:26 +0000 (14:59 -0700)]
Change API from flush(handle) to flush(). Call flush on all active sensors in the given SensorEventConnection.
Change-Id: I4ef2bec80406c517903ab9782dc9eaf3fa8b7f36
Andy McFadden [Fri, 11 Oct 2013 18:16:03 +0000 (11:16 -0700)]
Use black for blackout layer
SurfaceFlinger was rendering dark purple for secure content, which
showed up when we took a screen shot for the orientation change
animation. Use black instead.
Bug
11157921
Change-Id: I3895e8168891d49dc5b84eed599bcd0a303bb70a
Michael Wright [Fri, 11 Oct 2013 01:54:12 +0000 (18:54 -0700)]
Eliminate latency when resampling is disabled
Since the latency was introduced to avoid egregious errors during
resampling, remove it when we aren't resampling.
Change-Id: Ia8e9a9afb1e16212fec81a8c9c661c598e1b0ebf
Dave Burke [Fri, 11 Oct 2013 02:33:15 +0000 (02:33 +0000)]
Merge "Eliminate latency when resampling is disabled" into klp-dev
Aravind Akella [Fri, 11 Oct 2013 02:05:40 +0000 (02:05 +0000)]
Merge "Change API from flush(handle) to flush(). Call flush on all active sensors in the given SensorEventConnection." into klp-dev
Michael Wright [Fri, 11 Oct 2013 01:54:12 +0000 (18:54 -0700)]
Eliminate latency when resampling is disabled
Since the latency was introduced to avoid egregious errors during
resampling, remove it when we aren't resampling.
Change-Id: Ia8e9a9afb1e16212fec81a8c9c661c598e1b0ebf
Jesse Hall [Thu, 10 Oct 2013 22:24:32 +0000 (22:24 +0000)]
Merge "Wake up disp sync thread when setting display period" into klp-dev
Jesse Hall [Thu, 10 Oct 2013 21:48:22 +0000 (14:48 -0700)]
Wake up disp sync thread when setting display period
Bug:
10624956
Change-Id: I272c15f319521bfbd1bb70451366c7dd84d60bf9
Andy McFadden [Wed, 9 Oct 2013 23:38:02 +0000 (16:38 -0700)]
Fix blank / partial screenshots
The screen capture code wasn't waiting for the render to finish,
so sometimes you'd see an empty or partial image.
Bug
11131777
Change-Id: Ic64087322ce3bb15bb5f4fb1eb07579880fe6197
Jamie Gennis [Thu, 10 Oct 2013 00:49:37 +0000 (17:49 -0700)]
DispSync: don't compensate for wakeup latency
This change removes the wakeup latency compensation from the software-generated
vsync events. Choreographer can't handle timestamps in the future, so don't
aim for early wake-ups with the expectation that the actual wake-up will be
late.
Bug:
11153576
Aravind Akella [Tue, 8 Oct 2013 21:59:26 +0000 (14:59 -0700)]
Change API from flush(handle) to flush(). Call flush on all active sensors in the given SensorEventConnection.
Change-Id: I4ef2bec80406c517903ab9782dc9eaf3fa8b7f36
Andy McFadden [Wed, 9 Oct 2013 23:38:02 +0000 (16:38 -0700)]
Fix blank / partial screenshots
The screen capture code wasn't waiting for the render to finish,
so sometimes you'd see an empty or partial image.
Bug
11131777
Change-Id: Ic64087322ce3bb15bb5f4fb1eb07579880fe6197
The Android Automerger [Wed, 9 Oct 2013 13:01:16 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Ed Heyl [Tue, 8 Oct 2013 22:40:38 +0000 (15:40 -0700)]
merge in KQS81M
Jamie Gennis [Tue, 30 Jul 2013 22:10:32 +0000 (15:10 -0700)]
SurfaceFlinger: SW-based vsync events
This change adds the DispSync class, which models the hardware vsync event
times to allow vsync event callbacks to be done at an arbitrary phase offset
from the hardware vsync. This can be used to reduce the minimum latency from
Choreographer wake-up to on-screen image presentation.
Bug:
10624956
Change-Id: I8c7a54ceacaa4d709726ed97b0dcae4093a7bdcf
The Android Automerger [Sun, 6 Oct 2013 13:01:27 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Alex Ray [Thu, 3 Oct 2013 20:09:37 +0000 (13:09 -0700)]
Add feature android.hardware.consumerir xml file
Bug:
10676690
Change-Id: I2cc62b9c97a71588c43ff96ca38d470976bde9b0
Marco Nelissen [Thu, 3 Oct 2013 16:34:51 +0000 (16:34 +0000)]
Merge "Allow blaming a single uid for work done" into klp-dev
Lajos Molnar [Thu, 3 Oct 2013 16:10:25 +0000 (16:10 +0000)]
Merge "media/hardware/HardwareAPI.h: Added PrepareForAdaptivePlaybackParams" into klp-dev
Marco Nelissen [Wed, 2 Oct 2013 19:42:20 +0000 (12:42 -0700)]
Allow blaming a single uid for work done
This lets audioflinger assign blame for wakelocks to a single uid.
Currently this is only used for recording wakelocks.
b/
10985160
Change-Id: Idc9adb22c29030010ac690d4cb95e7e7ea6b91e6
The Android Automerger [Thu, 3 Oct 2013 13:02:17 +0000 (06:02 -0700)]
merge in klp-release history after reset to klp-dev
Jesse Hall [Wed, 2 Oct 2013 00:25:20 +0000 (17:25 -0700)]
Set the outbuf acquire fence after we actually have it.
In GLES-only mode, we don't have the outbuf acquire fence until after
GLES composition is done for the frame. We were setting the fence in
HWC's state immediately after dequeueing the buffer from the consumer,
before GLES had started. This fence got passed through HWC and on to
the consumer, so the consumer was reading the buffer before GLES was
done writing to it.
Now we update HWC's state just before set(), when we know we have the
right fence.
Bug:
11000763
Change-Id: Iea9db4c69634c352dc2d600f0bdb6bef2a432636
Mathias Agopian [Tue, 1 Oct 2013 22:36:52 +0000 (15:36 -0700)]
only clear FB when asked for the opaque layer
a layer need to be considered NOT opaque if it has a
plane-alpha.
Bug:
10846930
Change-Id: Ibd8981b63ede4560c7096bacc4cff46a7eb2a8bb
Jesse Hall [Mon, 30 Sep 2013 23:49:30 +0000 (16:49 -0700)]
Treat composition frames with no layers as using GLES composition
When there are no window layers for a display, SurfaceFlinger clears
the undefined region using GLES. Some of the places that check for
GLES composition weren't considering this special case, in particular:
- We were skipping the eglSwapBuffers() on these frames.
- We were putting VirtualDisplaySurface in HWC-only composition mode.
This change centralizes the logic for this special case.
Bug:
10957068
Change-Id: I2deaf2ed101e8ea76708862a6bb67751b6078794
Jamie Gennis [Thu, 26 Sep 2013 00:21:56 +0000 (17:21 -0700)]
BufferQueue: fix a test crash
Bug:
10935880
Change-Id: If76e9fb055103bad0db7e6c16487532671573149
Jamie Gennis [Wed, 2 Oct 2013 17:36:48 +0000 (17:36 +0000)]
Merge "GLConsumer: start using EGL_ANDROID_image_crop" into klp-dev
Dave Burke [Wed, 2 Oct 2013 17:36:40 +0000 (17:36 +0000)]
Merge "only clear FB when asked for the opaque layer" into klp-dev
Jamie Gennis [Tue, 24 Sep 2013 00:22:10 +0000 (17:22 -0700)]
GLConsumer: start using EGL_ANDROID_image_crop
This change makes GLConsumer use the EGL_ANDROID_image_crop extension when
available on a device. The crop rectangle is passed to the EGL driver when
creating EGLImages, allowing the crop to be performed by the driver rather than
using the texture transform matrix.
Bug:
10897141
Change-Id: I63e9a5d5c85067376abc420e3639154468346311
Jesse Hall [Wed, 2 Oct 2013 14:54:03 +0000 (14:54 +0000)]
Merge "Treat composition frames with no layers as using GLES composition" into klp-dev
Jesse Hall [Wed, 2 Oct 2013 00:25:20 +0000 (17:25 -0700)]
Set the outbuf acquire fence after we actually have it.
In GLES-only mode, we don't have the outbuf acquire fence until after
GLES composition is done for the frame. We were setting the fence in
HWC's state immediately after dequeueing the buffer from the consumer,
before GLES had started. This fence got passed through HWC and on to
the consumer, so the consumer was reading the buffer before GLES was
done writing to it.
Now we update HWC's state just before set(), when we know we have the
right fence.
Bug:
11000763
Change-Id: Iea9db4c69634c352dc2d600f0bdb6bef2a432636
Mathias Agopian [Tue, 1 Oct 2013 22:36:52 +0000 (15:36 -0700)]
only clear FB when asked for the opaque layer
a layer need to be considered NOT opaque if it has a
plane-alpha.
Bug:
10846930
Change-Id: Ibd8981b63ede4560c7096bacc4cff46a7eb2a8bb
Jesse Hall [Mon, 30 Sep 2013 23:49:30 +0000 (16:49 -0700)]
Treat composition frames with no layers as using GLES composition
When there are no window layers for a display, SurfaceFlinger clears
the undefined region using GLES. Some of the places that check for
GLES composition weren't considering this special case, in particular:
- We were skipping the eglSwapBuffers() on these frames.
- We were putting VirtualDisplaySurface in HWC-only composition mode.
This change centralizes the logic for this special case.
Bug:
10957068
Change-Id: I2deaf2ed101e8ea76708862a6bb67751b6078794
Jesse Hall [Sat, 28 Sep 2013 05:10:47 +0000 (22:10 -0700)]
Fix two EGLConfig selection bugs
This fixes two bugs introduced by
Change-Id: Ia8cc084c02a0e3de910def024da8a08d02bbd89d
(a) There is no invalid EGLConfig value, in particular zero is valid.
Checking return values of eglGetConfigs and eglChooseConfig is the
only way to determine success.
(b) The "simple" EGLConfig query used as the emulator fallback should
not include EGL_RECORDABLE; the emulator doesn't have it.
Bug:
10935622
Change-Id: Ib798a24e7cf06a679811c46eaa45d39174a715ec
Jesse Hall [Sat, 28 Sep 2013 05:10:47 +0000 (22:10 -0700)]
Fix two EGLConfig selection bugs
This fixes two bugs introduced by
Change-Id: Ia8cc084c02a0e3de910def024da8a08d02bbd89d
(a) There is no invalid EGLConfig value, in particular zero is valid.
Checking return values of eglGetConfigs and eglChooseConfig is the
only way to determine success.
(b) The "simple" EGLConfig query used as the emulator fallback should
not include EGL_RECORDABLE; the emulator doesn't have it.
Bug:
10935622
Change-Id: Ib798a24e7cf06a679811c46eaa45d39174a715ec
The Android Automerger [Sun, 29 Sep 2013 13:01:19 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Mathias Agopian [Thu, 26 Sep 2013 03:40:07 +0000 (20:40 -0700)]
fix crashers with wifi/virtual displays
Bug:
10647742
Change-Id: I4b8ed9da52ef95af3a3b3a04b98514a3776a674d
Mathias Agopian [Thu, 26 Sep 2013 19:41:22 +0000 (19:41 +0000)]
Merge "fix initialization of framebuffer target crop rect on hwc 1.3" into klp-dev
Mathias Agopian [Thu, 26 Sep 2013 03:44:34 +0000 (20:44 -0700)]
fix initialization of framebuffer target crop rect on hwc 1.3
Bug:
10936771
Change-Id: If283e5e231ca34b93e0b1784bb4e8e4c7bfd75de
Mathias Agopian [Thu, 26 Sep 2013 03:40:07 +0000 (20:40 -0700)]
fix crashers with wifi/virtual displays
Bug:
10647742
Change-Id: I4b8ed9da52ef95af3a3b3a04b98514a3776a674d
The Android Automerger [Sun, 22 Sep 2013 17:51:13 +0000 (10:51 -0700)]
merge in klp-release history after reset to klp-dev
Eino-Ville Talvala [Thu, 19 Sep 2013 20:36:07 +0000 (13:36 -0700)]
GLConsumer: Add query for current frame number.
Surface the underlying frame number of the current texture.
Bug:
10830400
Change-Id: Ide3a7da12ea0aac54588beb6bf00dbfe2cd37653
Mathias Agopian [Fri, 20 Sep 2013 00:08:37 +0000 (17:08 -0700)]
reinstate black-screenshot debugging code
turned off by default.
Bug:
10809349
Change-Id: I3e6b8c7860e6b0e122b8f07de4020967cd1f005c
Mathias Agopian [Thu, 19 Sep 2013 22:29:30 +0000 (22:29 +0000)]
Merge "Fix GLES context version selection" into klp-dev
Eino-Ville Talvala [Thu, 19 Sep 2013 20:36:07 +0000 (13:36 -0700)]
GLConsumer: Add query for current frame number.
Surface the underlying frame number of the current texture.
Bug:
10830400
Change-Id: Ide3a7da12ea0aac54588beb6bf00dbfe2cd37653
The Android Automerger [Thu, 19 Sep 2013 13:01:50 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Mathias Agopian [Wed, 18 Sep 2013 23:20:26 +0000 (16:20 -0700)]
Fix GLES context version selection
Explicitly selects an ES 2.0 config first, then an ES 1.x config,
before attempting the fallback path for the emulator.
Bug:
10820214
Change-Id: Ia8cc084c02a0e3de910def024da8a08d02bbd89d
Mathias Agopian [Wed, 18 Sep 2013 06:45:22 +0000 (23:45 -0700)]
fix camera API 2.0 orientation
we add a flag to ANativeWindow::setBufferTransform that means
"apply the inverse rotation of the display this buffer is displayed
onto to".
Bug:
10804238
Change-Id: Id2447676271950463e8dbcef1b95935c5c3f32b2
The Android Automerger [Wed, 18 Sep 2013 04:11:23 +0000 (21:11 -0700)]
merge in klp-release history after reset to klp-dev
The Android Automerger [Wed, 18 Sep 2013 00:39:56 +0000 (17:39 -0700)]
merge in klp-release history after reset to klp-dev
Mathias Agopian [Tue, 17 Sep 2013 22:55:18 +0000 (15:55 -0700)]
Fix build (tests)
Change-Id: I5b233ef448e5e7eec3818c6586dfea138b28f7b6
Mathias Agopian [Tue, 17 Sep 2013 21:31:13 +0000 (21:31 +0000)]
Merge "Make sure do disconnect from a BQ when its client dies." into klp-dev
Aravind Akella [Tue, 17 Sep 2013 18:17:50 +0000 (18:17 +0000)]
Merge "Fix for AOSP fusion sensors not handling multiple clients correctly." into klp-dev
Aravind Akella [Tue, 17 Sep 2013 17:49:26 +0000 (17:49 +0000)]
Merge "Sensor Batching Bug fixes." into klp-dev
Amith Yamasani [Tue, 17 Sep 2013 15:56:23 +0000 (15:56 +0000)]
Merge "Enable FEATURE_DEVICE_ADMIN for handheld devices" into klp-dev
The Android Automerger [Tue, 17 Sep 2013 13:01:01 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Jesse Hall [Tue, 17 Sep 2013 03:27:15 +0000 (03:27 +0000)]
Merge "Stop using default value for Surface producerControlledByApp parameter" into klp-dev
Mathias Agopian [Thu, 12 Sep 2013 02:35:45 +0000 (19:35 -0700)]
Make sure do disconnect from a BQ when its client dies.
Bug:
5679534
Change-Id: If447e8673df83fe0b1d6210641e0a48522501a53
Aravind Akella [Mon, 16 Sep 2013 22:37:41 +0000 (15:37 -0700)]
Fix for AOSP fusion sensors not handling multiple clients correctly.
Bug:
10786801
Change-Id: I7b938bc583a303a30237c3d93b5accbf64cc90b5
Jesse Hall [Mon, 16 Sep 2013 22:24:53 +0000 (15:24 -0700)]
Stop using default value for Surface producerControlledByApp parameter
Bug:
10785749
Change-Id: Ifbf9340e5eabe621a69e990ec3e05ac51f8db66a
Aravind Akella [Fri, 6 Sep 2013 00:03:38 +0000 (17:03 -0700)]
Sensor Batching Bug fixes.
i) SensorService dropping events. Increase SOCKET_BUFFER_SIZE in BitTube ctor.
ii) Call flush before every activate.
iii) Emulate flush for older devices. Add a trivial flush complete event when flush is called.
Bug:
10641596
Change-Id: I30d0f3948e830457143f16e157b6ad81908687ce
Jesse Hall [Sun, 15 Sep 2013 04:00:14 +0000 (21:00 -0700)]
Disable the egl_khr_gl_colorspace extension
Bug:
10777398
Change-Id: Ib50ea8b9d5d960537701b85929d6312304993a0f
Amith Yamasani [Mon, 16 Sep 2013 17:48:35 +0000 (10:48 -0700)]
Enable FEATURE_DEVICE_ADMIN for handheld devices
Bug:
9520957
Change-Id: I9c09dc726509db9e6d9ba4700255c74528b9f9fa
The Android Automerger [Thu, 12 Sep 2013 13:01:32 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Mathias Agopian [Tue, 10 Sep 2013 06:36:25 +0000 (23:36 -0700)]
fix a few problems with BitTube
BitTube used to send objects one at a time and didn't
handle errors properly.
We now send all the objects in one call, which means they
have to be read as a single batch as well. This changes the
BitTube API.
Update SensorService to the new API.
Also added an API to set the size of the send buffer.
Bug:
10641596
Change-Id: I77c70d35e351fdba0416fae4b7ca3b1d56272251
The Android Automerger [Mon, 9 Sep 2013 13:01:45 +0000 (06:01 -0700)]
merge in klp-release history after reset to klp-dev
Mathias Agopian [Fri, 6 Sep 2013 20:36:49 +0000 (13:36 -0700)]
fix a possible null dereference when eglMakeCurrent() fails
Bug:
10648797
Change-Id: Iee0be47f2646feb25de4ea199bbb9b707452916e
Mathias Agopian [Fri, 6 Sep 2013 02:09:42 +0000 (02:09 +0000)]
Merge "color blindness enhancement" into klp-dev