nl80211: Sanitize array index in parse_txq_params

commit 259d8c1e984318497c84eef547bbb6b1d9f4eb05

Wireless drivers rely on parse_txq_params to validate that txq_params->ac
is less than NL80211_NUM_ACS by the time the low-level driver's ->conf_tx()
handler is called. Use a new helper, array_index_nospec(), to sanitize
txq_params->ac with respect to speculation. I.e. ensure that any
speculation into ->conf_tx() handlers is done with a value of
txq_params->ac that is within the bounds of [0, NL80211_NUM_ACS).

Reported-by: Christian Lamparter <chunkeey@gmail.com>
Reported-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: linux-wireless@vger.kernel.org
Cc: torvalds@linux-foundation.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727419584.33451.7700736761686184303.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs, fdtable: Prevent bounds-check bypass via speculative execution

commit 56c30ba7b348b90484969054d561f711ba196507

'fd' is a user controlled value that is used as a data dependency to
read from the 'fdt->fd' array.  In order to avoid potential leaks of
kernel memory values, block speculative execution of the instruction
stream that could issue reads based on an invalid 'file *' returned from
__fcheck_files.

Co-developed-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727418500.33451.17392199002892248656.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/syscall: Sanitize syscall table de-references under speculation

commit 2fbd7af5af8665d18bcefae3e9700be07e22b681

The syscall table base is a user controlled function pointer in kernel
space. Use array_index_nospec() to prevent any out of bounds speculation.

While retpoline prevents speculating into a userspace directed target it
does not stop the pointer de-reference, the concern is leaking memory
relative to the syscall table base, by observing instruction cache
behavior.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727417984.33451.1216731042505722161.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/get_user: Use pointer masking to limit speculation

commit c7f631cb07e7da06ac1d231ca178452339e32a94

Quoting Linus:

    I do think that it would be a good idea to very expressly document
    the fact that it's not that the user access itself is unsafe. I do
    agree that things like "get_user()" want to be protected, but not
    because of any direct bugs or problems with get_user() and friends,
    but simply because get_user() is an excellent source of a pointer
    that is obviously controlled from a potentially attacking user
    space. So it's a prime candidate for then finding _subsequent_
    accesses that can then be used to perturb the cache.

Unlike the __get_user() case get_user() includes the address limit check
near the pointer de-reference. With that locality the speculation can be
mitigated with pointer narrowing rather than a barrier, i.e.
array_index_nospec(). Where the narrowing is performed by:

cmp %limit, %ptr
sbb %mask, %mask
and %mask, %ptr

With respect to speculation the value of %ptr is either less than %limit
or NULL.

Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727417469.33451.11804043010080838495.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/uaccess: Use __uaccess_begin_nospec() and uaccess_try_nospec

commit 304ec1b050310548db33063e567123fae8fd0301

Quoting Linus:

    I do think that it would be a good idea to very expressly document
    the fact that it's not that the user access itself is unsafe. I do
    agree that things like "get_user()" want to be protected, but not
    because of any direct bugs or problems with get_user() and friends,
    but simply because get_user() is an excellent source of a pointer
    that is obviously controlled from a potentially attacking user
    space. So it's a prime candidate for then finding _subsequent_
    accesses that can then be used to perturb the cache.

__uaccess_begin_nospec() covers __get_user() and copy_from_iter() where the
limit check is far away from the user pointer de-reference. In those cases
a barrier_nospec() prevents speculation with a potential pointer to
privileged memory. uaccess_try_nospec covers get_user_try.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416953.33451.10508284228526170604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/usercopy: Replace open coded stac/clac with __uaccess_{begin, end}

commit b5c4ae4f35325d520b230bab6eb3310613b72ac1

In preparation for converting some __uaccess_begin() instances to
__uacess_begin_nospec(), make sure all 'from user' uaccess paths are
using the _begin(), _end() helpers rather than open-coded stac() and
clac().

No functional changes.

Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416438.33451.17309465232057176966.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Introduce __uaccess_begin_nospec() and uaccess_try_nospec

commit b3bbfb3fb5d25776b8e3f361d2eedaabb0b496cd

For __get_user() paths, do not allow the kernel to speculate on the value
of a user controlled pointer. In addition to the 'stac' instruction for
Supervisor Mode Access Protection (SMAP), a barrier_nospec() causes the
access_ok() result to resolve in the pipeline before the CPU might take any
speculative action on the pointer value. Given the cost of 'stac' the
speculation barrier is placed after 'stac' to hopefully overlap the cost of
disabling SMAP with the cost of flushing the instruction pipeline.

Since __get_user is a major kernel interface that deals with user
controlled pointers, the __uaccess_begin_nospec() mechanism will prevent
speculative execution past an access_ok() permission check. While
speculative execution past access_ok() is not enough to lead to a kernel
memory leak, it is a necessary precondition.

To be clear, __uaccess_begin_nospec() is addressing a class of potential
problems near __get_user() usages.

Note, that while the barrier_nospec() in __uaccess_begin_nospec() is used
to protect __get_user(), pointer masking similar to array_index_nospec()
will be used for get_user() since it incorporates a bounds check near the
usage.

uaccess_try_nospec provides the same mechanism for get_user_try.

No functional changes.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415922.33451.5796614273104346583.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Introduce barrier_nospec

commit b3d7ad85b80bbc404635dca80f5b129f6242bc7a

Rename the open coded form of this instruction sequence from
rdtsc_ordered() into a generic barrier primitive, barrier_nospec().

One of the mitigations for Spectre variant1 vulnerabilities is to fence
speculative execution after successfully validating a bounds check. I.e.
force the result of a bounds check to resolve in the instruction pipeline
to ensure speculative execution honors that result before potentially
operating on out-of-bounds data.

No functional changes.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415361.33451.9049453007262764675.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Implement array_index_mask_nospec

commit babdde2698d482b6c0de1eab4f697cf5856c5859

array_index_nospec() uses a mask to sanitize user controllable array
indexes, i.e. generate a 0 mask if 'index' >= 'size', and a ~0 mask
otherwise. While the default array_index_mask_nospec() handles the
carry-bit from the (index - size) result in software.

The x86 array_index_mask_nospec() does the same, but the carry-bit is
handled in the processor CF flag without conditional instructions in the
control flow.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727414808.33451.1873237130672785331.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

array_index_nospec: Sanitize speculative array de-references

commit f3804203306e098dae9ca51540fcd5eb700d7f40

array_index_nospec() is proposed as a generic mechanism to mitigate
against Spectre-variant-1 attacks, i.e. an attack that bypasses boundary
checks via speculative execution. The array_index_nospec()
implementation is expected to be safe for current generation CPUs across
multiple architectures (ARM, x86).

Based on an original implementation by Linus Torvalds, tweaked to remove
speculative flows by Alexei Starovoitov, and tweaked again by Linus to
introduce an x86 assembly implementation for the mask generation.

Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Cyril Novikov <cnovikov@lynx.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: kernel-hardening@lists.openwall.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727414229.33451.18411580953862676575.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: Document array_index_nospec

commit f84a56f73dddaeac1dba8045b007f742f61cd2da

Document the rationale and usage of the new array_index_nospec() helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-arch@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: gregkh@linuxfoundation.org
Cc: kernel-hardening@lists.openwall.com
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727413645.33451.15878817161436755393.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Move 'status' from thread_struct to thread_info

commit 37a8f7c38339b22b69876d6f5a0ab851565284e3

The TS_COMPAT bit is very hot and is accessed from code paths that mostly
also touch thread_info::flags.  Move it into struct thread_info to improve
cache locality.

The only reason it was in thread_struct is that there was a brief period
during which arch-specific fields were not allowed in struct thread_info.

Linus suggested further changing:

  ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);

to:

  if (unlikely(ti->status & (TS_COMPAT|TS_I386_REGS_POKED)))
          ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);

on the theory that frequently dirtying the cacheline even in pure 64-bit
code that never needs to modify status hurts performance.  That could be a
reasonable followup patch, but I suspect it matters less on top of this
patch.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/03148bcc1b217100e6e8ecf6a5468c45cf4304b6.1517164461.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Push extra regs right away

commit d1f7732009e0549eedf8ea1db948dc37be77fd46

With the fast path removed there is no point in splitting the push of the
normal and the extra register set. Just push the extra regs right away.

[ tglx: Split out from 'x86/entry/64: Remove the SYSCALL64 fast path' ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/462dff8d4d64dfbfc851fbf3130641809d980ecd.1517164461.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Remove the SYSCALL64 fast path

commit 21d375b6b34ff511a507de27bf316b3dde6938d9

The SYCALLL64 fast path was a nice, if small, optimization back in the good
old days when syscalls were actually reasonably fast.  Now there is PTI to
slow everything down, and indirect branches are verboten, making everything
messier.  The retpoline code in the fast path is particularly nasty.

Just get rid of the fast path. The slow path is barely slower.

[ tglx: Split out the 'push all extra regs' part ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Link: https://lkml.kernel.org/r/462dff8d4d64dfbfc851fbf3130641809d980ecd.1517164461.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre: Check CONFIG_RETPOLINE in command line parser

commit 9471eee9186a46893726e22ebb54cade3f9bc043

The spectre_v2 option 'auto' does not check whether CONFIG_RETPOLINE is
enabled. As a consequence it fails to emit the appropriate warning and sets
feature flags which have no effect at all.

Add the missing IS_ENABLED() check.

Fixes: da285121560e ("x86/spectre: Add boot time option to select Spectre v2 mitigation")
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: Tomohiro <misono.tomohiro@jp.fujitsu.com>
Cc: dave.hansen@intel.com
Cc: bp@alien8.de
Cc: arjan@linux.intel.com
Cc: dwmw@amazon.co.uk
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/f5892721-7528-3647-08fb-f8d10e65ad87@cn.fujitsu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix overlap of i386 CPU_ENTRY_AREA with FIX_BTMAP

commit 55f49fcb879fbeebf2a8c1ac7c9e6d90df55f798

Since commit 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the
fixmap"), i386's CPU_ENTRY_AREA has been mapped to the memory area just
below FIXADDR_START. But already immediately before FIXADDR_START is the
FIX_BTMAP area, which means that early_ioremap can collide with the entry
area.

It's especially bad on PAE where FIX_BTMAP_BEGIN gets aligned to exactly
match CPU_ENTRY_AREA_BASE, so the first early_ioremap slot clobbers the
IDT and causes interrupts during early boot to reset the system.

The overlap wasn't a problem before the CPU entry area was introduced,
as the fixmap has classically been preceded by the pkmap or vmalloc
areas, neither of which is used until early_ioremap is out of the
picture.

Relocate CPU_ENTRY_AREA to below FIX_BTMAP, not just below the permanent
fixmap area.

Fixes: commit 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Signed-off-by: William Grant <william.grant@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/7041d181-a019-e8b9-4e4e-48215f841e2c@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Warn on stripped section symbol

commit 830c1e3d16b2c1733cd1ec9c8f4d47a398ae31bc

With the following fix:

  2a0098d70640 ("objtool: Fix seg fault with gold linker")

... a seg fault was avoided, but the original seg fault condition in
objtool wasn't fixed.  Replace the seg fault with an error message.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/dc4585a70d6b975c99fc51d1957ccdde7bd52f3a.1517284349.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Add support for alternatives at the end of a section

commit 17bc33914bcc98ba3c6b426fd1c49587a25c0597

Now that the previous patch gave objtool the ability to read retpoline
alternatives, it shows a new warning:

  arch/x86/entry/entry_64.o: warning: objtool: .entry_trampoline: don't know how to handle alternatives at end of section

This is due to the JMP_NOSPEC in entry_SYSCALL_64_trampoline().

Previously, objtool ignored this situation because it wasn't needed, and
it would have required a bit of extra code.  Now that this case exists,
add proper support for it.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2a30a3c2158af47d891a76e69bb1ef347e0443fd.1517284349.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Improve retpoline alternative handling

commit a845c7cf4b4cb5e9e3b2823867892b27646f3a98

Currently objtool requires all retpolines to be:

  a) patched in with alternatives; and

  b) annotated with ANNOTATE_NOSPEC_ALTERNATIVE.

If you forget to do both of the above, objtool segfaults trying to
dereference a NULL 'insn->call_dest' pointer.

Avoid that situation and print a more helpful error message:

  quirks.o: warning: objtool: efi_delete_dummy_variable()+0x99: unsupported intra-function call
  quirks.o: warning: objtool: If this is a retpoline, please patch it in with alternatives and annotate it with ANNOTATE_NOSPEC_ALTERNATIVE.

Future improvements can be made to make objtool smarter with respect to
retpolines, but this is a good incremental improvement for now.

Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/819e50b6d9c2e1a22e34c1a636c0b2057cc8c6e5.1517284349.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: introduce alloc_loaded_vmcs

commit f21f165ef922c2146cc5bdc620f542953c41714b

Group together the calls to alloc_vmcs and loaded_vmcs_init.  Soon we'll also
allocate an MSR bitmap there.

Cc: stable@vger.kernel.org # prereq for Spectre mitigation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Eliminate vmcs02 pool

commit de3a0021a60635de96aa92713c1a31a96747d72c

The potential performance advantages of a vmcs02 pool have never been
realized. To simplify the code, eliminate the pool. Instead, a single
vmcs02 is allocated per VCPU when the VCPU enters VMX operation.

Cc: stable@vger.kernel.org # prereq for Spectre mitigation
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Ameya More <ameya.more@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit 0cab20cec0b663b7be8e2be5998d5a4113647f86 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: pxa: pxa2xx: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit 0b9335cbd38e3bd2025bcc23b5758df4ac035f75 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc/accel: Fix up module licenses

commit 9a0ebbc93547d88f422905c34dcceebe928f3e9e upstream.

The module license checker complains about these two so just fix
it up. They are both GPLv2, both written by me or using code
I extracted while refactoring from the GPLv2 drivers.

Cc: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

commit 09c479f7f1fbfaf848e5813996793966cd50be81 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Simplify indirect_branch_prediction_barrier()

commit 64e16720ea0879f8ab4547e3b9758936d483909b

Make it all a function which does the WRMSR instead of having a hairy
inline asm.

[dwmw2: export it, fix CONFIG_RETPOLINE issues]

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-4-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Simplify vmexit_fill_RSB()

commit 1dde7415e99933bb7293d6b2843752cbdb43ec11

Simplify it to call an asm-function instead of pasting 41 insn bytes at
every call site. Also, add alignment to the macro as suggested here:

  https://support.google.com/faqs/answer/7625886

[dwmw2: Clean up comments, let it clobber %ebx and just tell the compiler]

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-3-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Clean up Spectre v2 related CPUID flags

commit 2961298efe1ea1b6fc0d7ee8b76018fa6c0bcef2

We want to expose the hardware features simply in /proc/cpuinfo as "ibrs",
"ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them
as the user-visible bits.

When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB
capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP
bit is set, set the AMD STIBP that's used for the generic hardware
capability.

Hide the rest from /proc/cpuinfo by putting "" in the comments. Including
RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are
patches to make the sysfs vulnerabilities information non-readable by
non-root, and the same should apply to all information about which
mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo.

The feature bit for whether IBPB is actually used, which is needed for
ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB.

Originally-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-2-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/bugs: Make retpoline module warning conditional

commit e383095c7fe8d218e00ec0f83e4b95ed4e627b02

If sysfs is disabled and RETPOLINE not defined:

arch/x86/kernel/cpu/bugs.c:97:13: warning: ‘spectre_v2_bad_module’ defined but not used
[-Wunused-variable]
 static bool spectre_v2_bad_module;

Hide it.

Fixes: caf7501a1b4e ("module/retpoline: Warn about missing retpoline in module")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Drop one "mitigation" from dmesg

commit 55fa19d3e51f33d9cd4056d25836d93abf9438db

Make

[    0.031118] Spectre V2 mitigation: Mitigation: Full generic retpoline

into

[    0.031118] Spectre V2: Mitigation: Full generic retpoline

to reduce the mitigation mitigations strings.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: riel@redhat.com
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: jikos@kernel.org
Cc: luto@amacapital.net
Cc: dave.hansen@intel.com
Cc: torvalds@linux-foundation.org
Cc: keescook@google.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: tim.c.chen@linux.intel.com
Cc: pjt@google.com
Link: https://lkml.kernel.org/r/20180126121139.31959-5-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/nospec: Fix header guards names

commit 7a32fc51ca938e67974cbb9db31e1a43f98345a9

... to adhere to the _ASM_X86_ naming scheme.

No functional change.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: riel@redhat.com
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: jikos@kernel.org
Cc: luto@amacapital.net
Cc: dave.hansen@intel.com
Cc: torvalds@linux-foundation.org
Cc: keescook@google.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Cc: pjt@google.com
Link: https://lkml.kernel.org/r/20180126121139.31959-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternative: Print unadorned pointers

commit 0e6c16c652cadaffd25a6bb326ec10da5bcec6b4

After commit ad67b74d2469 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. However, this makes the alternative
debug output completely useless. Switch to %px in order to see the
unadorned kernel pointers.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: riel@redhat.com
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: jikos@kernel.org
Cc: luto@amacapital.net
Cc: dave.hansen@intel.com
Cc: torvalds@linux-foundation.org
Cc: keescook@google.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Cc: pjt@google.com
Link: https://lkml.kernel.org/r/20180126121139.31959-2-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support

commit 20ffa1caecca4db8f79fe665acdeaa5af815a24d

Expose indirect_branch_prediction_barrier() for use in subsequent patches.

[ tglx: Add IBPB status to spectre_v2 sysfs file ]

Co-developed-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-8-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes

commit a5b2966364538a0e68c9fa29bc0a3a1651799035

This doesn't refuse to load the affected microcodes; it just refuses to
use the Spectre v2 mitigation features if they're detected, by clearing
the appropriate feature bits.

The AMD CPUID bits are handled here too, because hypervisors *may* have
been exposing those bits even on Intel chips, for fine-grained control
of what's available.

It is non-trivial to use x86_match_cpu() for this table because that
doesn't handle steppings. And the approach taken in commit bd9240a18
almost made me lose my lunch.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-7-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown

commit fec9434a12f38d3aeafeb75711b71d8a1fdef621

Also, for CPUs which don't speculate at all, don't report that they're
vulnerable to the Spectre variants either.

Leave the cpu_no_meltdown[] match table with just X86_VENDOR_AMD in it
for now, even though that could be done with a simple comparison, on the
assumption that we'll have more to add.

Based on suggestions from Dave Hansen and Alan Cox.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-6-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/msr: Add definitions for new speculation control MSRs

commit 1e340c60d0dd3ae07b5bedc16a0469c14b9f3410

Add MSR and bit definitions for SPEC_CTRL, PRED_CMD and ARCH_CAPABILITIES.

See Intel's 336996-Speculative-Execution-Side-Channel-Mitigations.pdf

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-5-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Add AMD feature bits for Speculation Control

commit 5d10cbc91d9eb5537998b65608441b592eec65e7

AMD exposes the PRED_CMD/SPEC_CTRL MSRs slightly differently to Intel.
See http://lkml.kernel.org/r/2b3e25cc-286d-8bd0-aeaf-9ac4aae39de8@amd.com

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-4-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Add Intel feature bits for Speculation Control

commit fc67dd70adb711a45d2ef34e12d1a8be75edde61

Add three feature bits exposed by new microcode on Intel CPUs for
speculation control.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-3-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Add CPUID_7_EDX CPUID leaf

commit 95ca0ee8636059ea2800dfbac9ecac6212d6b38f

This is a pure feature bits leaf. There are two AVX512 feature bits in it
already which were handled as scattered bits, and three more from this leaf
are going to be added for speculation control features.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-2-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module/retpoline: Warn about missing retpoline in module

commit caf7501a1b4ec964190f31f9c3f163de252273b8

There's a risk that a kernel which has full retpoline mitigations becomes
vulnerable when a module gets loaded that hasn't been compiled with the
right compiler or the right option.

To enable detection of that mismatch at module load time, add a module info
string "retpoline" at build time when the module was compiled with
retpoline support. This only covers compiled C source, but assembler source
or prebuilt object files are not checked.

If a retpoline enabled kernel detects a non retpoline protected module at
load time, print a warning and report it in the sysfs vulnerability file.

[ tglx: Massaged changelog ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: jeyu@kernel.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180125235028.31211-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Make indirect call speculation safe

commit c940a3fb1e2e9b7d03228ab28f375fb5a47ff699

Replace indirect call with CALL_NOSPEC.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rga@amazon.de
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lkml.kernel.org/r/20180125095843.645776917@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Make indirect calls in emulator speculation safe

commit 1a29b5b7f347a1a9230c1e0af5b37e3e571588ab

Replace the indirect calls with CALL_NOSPEC.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rga@amazon.de
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lkml.kernel.org/r/20180125095843.595615683@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Remove the esp/rsp thunk

commit 1df37383a8aeabb9b418698f0bcdffea01f4b1b2

It doesn't make sense to have an indirect call thunk with esp/rsp as
retpoline code won't work correctly with the stack pointer register.
Removing it will help compiler writers to catch error in case such
a thunk call is emitted incorrectly.

Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Suggested-by: Jeff Law <law@redhat.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1516658974-27852-1-git-send-email-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Allow control of RFI flush via debugfs

commit 236003e6b5443c45c18e613d2b0d776a9f87540e upstream.

Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.

eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
    1
    $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
    $ cat /sys/kernel/debug/powerpc/rfi_flush
    0

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Wire up cpu_show_meltdown()

commit fd6e440f20b1a4304553775fc55938848ff617c9 upstream.

The recent commit 87590ce6e373 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:

  /sys/devices/system/cpu/vulnerabilities/meltdown

This commit wires up that file for 64-bit Book3S powerpc.

For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/faddr2line: fix CROSS_COMPILE unset error

commit 4cc90b4cc3d4955f79eae4f7f9d64e67e17b468e upstream.

faddr2line hit var unbound error when CROSS_COMPILE isn't set since
nounset option is set in bash script.

Link: http://lkml.kernel.org/r/20171206013022.GA83929@sofia
Fixes: 95a879825419 ("scripts/faddr2line: extend usage on generic arch")
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.17

x86/efi: Clarify that reset attack mitigation needs appropriate userspace

commit a5c03c31af2291f13689d11760c0b59fb70c9a5a upstream.

Some distributions have turned on the reset attack mitigation feature,
which is designed to force the platform to clear the contents of RAM if
the machine is shut down uncleanly. However, in order for the platform
to be able to determine whether the shutdown was clean or not, userspace
has to be configured to clear the MemoryOverwriteRequest flag on
shutdown - otherwise the firmware will end up clearing RAM on every
reboot, which is unnecessarily time consuming. Add some additional
clarity to the kconfig text to reduce the risk of systems being
configured this way.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - do not delete interrupt memory too early

commit a1ab69021a584d952e6548a44b93760547b1b6b5 upstream.

We want to free memory reserved for interrupt mask handling only after we
free functions, as function drivers might want to mask interrupts. This is
needed for the followup patch to the F03 that would implement unmasking and
masking interrupts from the serio pass-through port open() and close()
methods.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - unmask F03 interrupts when port is opened

commit 6abe534f0776d2437c8302f58d8eb5abd483e926 upstream.

Currently we register the pass-through serio port when we probe the F03 RMI
function, and then, in sensor configure phase, we unmask interrupts.
Unfortunately this is too late, as other drivers are free probe devices
attached to the serio port as soon as it is probed. Because interrupts are
masked, the IO times out, which may result in not being able to detect
trackpoints on the pass-through port.

To fix the issue we implement open() and close() methods for the
pass-through serio port and unmask interrupts from there. We also move
creation of the pass-through port form probe to configure stage, as RMI
driver does not enable transport interrupt until all functions are probed
(we should change this, but this is a separate topic).

We also try to clear the pending data before unmasking interrupts, because
some devices like to spam the system with multiple 0xaa 0x00 announcements,
which may interfere with us trying to query ID of the device.

Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

test_firmware: fix missing unlock on error in config_num_requests_store()

commit a5e1923356505e46476c2fb518559b7a4d9d25b1 upstream.

Add the missing unlock before return from function
config_num_requests_store() in the error handling case.

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels

commit 8f114acd4e1a9cfa05b70bcc4219bc88197b5c9b upstream.

in_concentration_raw should report, according to sysfs-bus-iio documentation,
a "Raw (unscaled no offset etc.) percentage reading of a substance."

Modify scale to convert from ppm/ppb to percentage:
1 ppm = 0.0001%
1 ppb = 0.0000001%

There is no offset needed to convert the ppm/ppb to percentage,
so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel.

Cc'd stable to reduce chance of userspace breakage in the long
run as we fix this wrong bit of ABI usage.

Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32: fix scan of multiple channels with DMA

commit 04e491ca9df60ffe8637d00d68e5ab8bc73b30d5 upstream.

By default, watermark is set to '1'. Watermark is used to fine tune
cyclic dma buffer period. In case watermark is left untouched (e.g. 1)
and several channels are being scanned, buffer period is wrongly set
(e.g. to 1 sample). As a consequence, data is never pushed to upper layer.
Fix buffer period size, by taking scan channels number into account.

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: imx: do not access registers while clocks disabled

commit d593574aff0ab846136190b1729c151c736727ec upstream.

Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.

Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream.

The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.

Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_uniphier: fix error return code in uniphier_uart_probe()

commit 7defa77d2baca4d6eb85234f10f38ab618332e75 upstream.

Fix to return a negative error code from the port register error
handling case instead of 0, as done elsewhere in this function.

Fixes: 39be40ce066d ("serial: 8250_uniphier: fix serial port index in private data")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_of: fix return code when probe function fails to get reset

commit b9820a31691b771db37afe2054dd3d3a680c1eed upstream.

The error pointer from devm_reset_control_get_optional_shared() is
not propagated.

One of the most common problem scenarios is it returns -EPROBE_DEFER
when the reset controller has not probed yet.  In this case, the
probe of the reset consumer should be deferred.

Fixes: e2860e1f62f2 ("serial: 8250_of: Add reset support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: allow runtime pm for platform with D0i3

commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream.

>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."

However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: binder: use VM_ALLOC to get vm area

commit aac6830ec1cb681544212838911cdc57f2638216 upstream.

VM_IOREMAP is used to access hardware through a mechanism called
I/O mapped memory. Android binder is a IPC machanism which will
not access I/O memory.

And VM_IOREMAP has alignment requiement which may not needed in
binder.
    __get_vm_area_node()
    {
    ...
        if (flags & VM_IOREMAP)
            align = 1ul << clamp_t(int, fls_long(size),
               PAGE_SHIFT, IOREMAP_MAX_ORDER);
    ...
    }

This patch will save some kernel vm area, especially for 32bit os.

In 32bit OS, kernel vm area is only 240MB. We may got below
error when launching a app:

<3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12
<3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Martijn Coenen <maco@android.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: remove waitqueue when thread exits.

commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.

binder_poll() passes the thread->wait waitqueue that
can be slept on for work. When a thread that uses
epoll explicitly exits using BINDER_THREAD_EXIT,
the waitqueue is freed, but it is never removed
from the corresponding epoll data structure. When
the process subsequently exits, the epoll cleanup
code tries to access the waitlist, which results in
a use-after-free.

Prevent this by using POLLFREE when the thread exits.

Signed-off-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()

commit 11fb37998759c48e4e4c200c974593cbeab25d3e upstream.

The current code tries to test for bits that are masked out by
usb_endpoint_maxp(). Instead, use the proper accessor to access
the new high bandwidth bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: uas: unconditionally bring back host after reset

commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream.

Quoting Hans:

If we return 1 from our post_reset handler, then our disconnect handler
will be called immediately afterwards. Since pre_reset blocks all scsi
requests our disconnect handler will then hang in the scsi_remove_host
call.

This is esp. bad because our disconnect handler hanging for ever also
stops the USB subsys from enumerating any new USB devices, causes commands
like lsusb to hang, etc.

In practice this happens when unplugging some uas devices because the hub
code may see the device as needing a warm-reset and calls usb_reset_device
before seeing the disconnect. In this case uas_configure_endpoints fails
with -ENODEV. We do not want to print an error for this, so this commit
also silences the shost_printk for -ENODEV.

ENDQUOTE

However, if we do that we better drop any unconditional execution
and report to the SCSI subsystem that we have undergone a reset
but we are not operational now.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_fs: Prevent gadget unbind if it is already unbound

commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream.

Upon usb composition switch there is possibility of ep0 file
release happening after gadget driver bind. In case of composition
switch from adb to a non-adb composition gadget will never gets
bound again resulting into failure of usb device enumeration. Fix
this issue by checking FFS_FL_BOUND flag and avoid extra
gadget driver unbind if it is already done as part of composition
switch.

This fixes adb reconnection error reported on Android running
v4.4 and above kernel versions. Verified on Hikey running vanilla
v4.15-rc7 + few out of tree Mali patches.

Reviewed-at: https://android-review.googlesource.com/#/c/582632/

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Badhri <badhri@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
[AmitP: Cherry-picked it from android-4.14 and updated the commit log]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: simple: add Motorola Tetra driver

commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream.

Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
devices.

D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9011 Rev=24.16
S:  Manufacturer=Motorola Solutions Inc.
S:  Product=Motorola Solutions TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Note that these devices do not support the CDC SET_CONTROL_LINE_STATE
request (for any interface).

Reported-by: Max Schulze <max.schulze@posteo.de>
Tested-by: Max Schulze <max.schulze@posteo.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: list: don't list devices attached to vhci_hcd

commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream.

usbip host lists devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Fix it to check and not list devices that are attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent bind loops on devices attached to vhci_hcd

commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream.

usbip host binds to devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Unbind followed by bind works, however device is left in a bad state with
accesses via the attached busid result in errors and system hangs during
shutdown.

Fix it to check and bail out if the device is already attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix possible sleep-in-atomic

commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream.

According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
   process_rcvd_data
     process_rcvd_status
       change_port_settings
         send_iosp_ext_cmd
           write_cmd_usb
             usb_kill_urb --> may sleep

To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.

This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CDC-ACM: apply quirk for card reader

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream.

This devices drops random bytes from messages if you talk to it
too fast.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: Do not log urb submission errors on disconnect

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream.

When disconnected sometimes the cdc-acm driver logs errors like these:

[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19

Silence these by not logging errors when the result is -ENODEV.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: pl2303: new device id for Chilitag

commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream.

This adds a new device id for Chilitag devices to the pl2303 driver.

Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: Add support for FS040U modem

commit 69341bd15018da0a662847e210f9b2380c71e623 upstream.

FS040U modem is manufactured by omega, and sold by Fujisoft. This patch
adds ID of the modem to use option1 driver. Interface 3 is used as
qmi_wwan, so the interface is ignored.

Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: fix data race between tty_init_dev and flush of buf

commit b027e2298bd588d6fa36ed2eda97447fb3eac078 upstream.

There can be a race, if receive_buf call comes before
tty initialization completes in n_tty_open and tty->disc_data
may be NULL.

CPU0 CPU1
---- ----
 000|n_tty_receive_buf_common()    n_tty_open()
-001|n_tty_receive_buf2() tty_ldisc_open.isra.3()
-002|tty_ldisc_receive_buf(inline) tty_ldisc_setup()

Using ldisc semaphore lock in tty_init_dev till disc_data
initializes completely.

Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ccree: fix fips event irq handling build

commit dc5591dc9c03e4cd22d3f0c3659196cc34668452 upstream.

When moving from internal for kernel FIPS infrastructure the FIPS event irq
handling code was left with the old ifdef by mistake. Fix it.

Fixes: b7e607bf33a2 ("staging: ccree: move FIPS support to kernel infrastructure")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ccree: NULLify backup_info when unused

commit 46df8824982e4fb0198776078d4a8c3e2d531464 upstream.

backup_info field is only allocated for decrypt code path.
The field was not nullified when not used causing a kfree
in an error handling path to attempt to free random
addresses as uncovered in stress testing.

Fixes: 737aed947f9b ("staging: ccree: save ciphertext for CTS IV")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: separate a connection destroy from free struct kib_conn

commit 9b046013e5837f8a58453d1e9f8e01d03adb7fe7 upstream.

The logic of the original commit 4d99b2581eff ("staging: lustre: avoid
intensive reconnecting for ko2iblnd") was assumed conditional free of
struct kib_conn if the second argument free_conn in function
kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn) is true.
But this hunk of code was dropped from original commit. As result the logic
works wrong and current code use struct kib_conn after free.

> drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
> 3317  kiblnd_destroy_conn(conn, !peer);
>                           ^^^^ Freed always (but should be conditionally)
> 3318
> 3319  spin_lock_irqsave(lock, flags);
> 3320  if (!peer)
> 3321      continue;
> 3322
> 3323  conn->ibc_peer = peer;
>       ^^^^^^^^^^^^^^ Use after free
> 3324  if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE)
> 3325      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3326                    &kiblnd_data.kib_reconn_list);
> 3327  else
> 3328      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3329                    &kiblnd_data.kib_reconn_wait);

To avoid confusion this fix moved the freeing a struct kib_conn outside of
the function kiblnd_destroy_conn() and free as it was intended in original
commit.

Fixes: 4d99b2581eff ("staging: lustre: avoid intensive reconnecting for ko2iblnd")
Signed-off-by: Dmitry Eremin <Dmitry.Eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: emulate #UD while in guest mode

[ Upstream commit bd89525a823ce6edddcedbe9aed79faa1b9cf544 ]

This reverts commits ae1f57670703656cc9f293722c3b8b6782f8ab3f
and ac9b305caa0df6f5b75d294e4b86c1027648991e.

If the hardware doesn't support MOVBE, but L0 sets CPUID.01H:ECX.MOVBE
in L1's emulated CPUID information, then L1 is likely to pass that
CPUID bit through to L2. L2 will expect MOVBE to work, but if L1
doesn't intercept #UD, then any MOVBE instruction executed in L2 will
raise #UD, and the exception will be delivered in L2.

Commit ac9b305caa0df6f5b75d294e4b86c1027648991e is a better and more
complete version of ae1f57670703 ("KVM: nVMX: Do not emulate #UD while
in guest mode"); however, neither considers the above case.

Suggested-by: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Move IRQ enable to PM path

[ Upstream commit ce9caf2f79a5aa170a4b6456a03db639eed9c988 ]

We were calling enable_irq on bind, where it was already enabled previously
by the IRQ helper. Additionally, dev->irq is not set correctly until after
postinstall and so was always zero here, triggering a warning in 4.15.
Fix both by moving the enable to the power management resume path, where we
know there was a previous disable invocation during suspend.

Fixes: 253696ccd613 ("drm/vc4: Account for interrupts in flight")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.com
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID

[ Upstream commit b77992d2df9e47144354d1b25328b180afa33442 ]

When not associated with an AP, wifi device drivers should respond to the
SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the
behavior expected by dhcpcd.

Currently, this driver returns an error code (-1) from the ioctl call,
which causes dhcpcd to assume that the device is not a wireless interface
and therefore it fails to work correctly with it thereafter.

This problem was reported and tested at
https://github.com/lwfinger/rtl8188eu/issues/234.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: don't dereference g until after it has been null checked

[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ]

Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.

Detected by CoverityScan, CID#1222135 ("Dereference before null check")

Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: Support early interrupts in xen pv guests

[ Upstream commit 42b3a4cb5609de757f5445fcad18945ba9239a07 ]

Add early interrupt handlers activated by idt_setup_early_handler() to
the handlers supported by Xen pv guests. This will allow for early
WARN() calls not crashing the guest.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: https://lkml.kernel.org/r/20171124084221.30172-1-jgross@suse.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usbtv: add a new usbid

[ Upstream commit 04226916d2360f56d57ad00bc48d2d1854d1e0b0 ]

A new usbid of UTV007 is found in a newly bought device.

The usbid is 1f71:3301.

The ID on the chip is:
UTV007
A89029.1
1520L18K1

Both video and audio is tested with the modified usbtv driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: NSP: Fix PPI interrupt types

[ Upstream commit 5f1aa51c7a1eef1c5a60b8334e32c89904964245 ]

Booting a kernel results in the kernel warning us about the following
PPI interrupts configuration:
[    0.105127] smp: Bringing up secondary CPUs ...
[    0.110545] GIC: PPI11 is secure or misconfigured
[    0.110551] GIC: PPI13 is secure or misconfigured

Fix this by using the appropriate edge configuration for PPI11 and
PPI13, this is similar to what was fixed for Northstar (BCM5301X) in
commit 0e34079cd1f6 ("ARM: dts: BCM5301X: Correct GIC_PPI interrupt
flags").

Fixes: 7b2e987de207 ("ARM: NSP: add minimal Northstar Plus device tree")
Fixes: 1a9d53cabaf4 ("ARM: dts: NSP: Add TWD Support to DT")
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: NSP: Disable AHCI controller for HR NSP boards

[ Upstream commit 77416ab35f5712382e5a792bfa1736ceb70d5bbb ]

The AHCI controller is currently enabled for all of these boards:
bcm958623hr and bcm958625hr would result in a hard hang on boot that we
cannot get rid of. Since this does not appear to have an easy and simple
fix, just disable the AHCI controller for now until this gets resolved.

Fixes: 70725d6e97ac ("ARM: dts: NSP: Enable SATA on bcm958625hr")
Fixes: d454c3762437 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix access to prph when transport is stopped

[ Upstream commit 0232d2cd7aa8e1b810fe84fb4059a0bd1eabe2ba ]

When getting HW rfkill we get stop_device being called from
two paths.
One path is the IRQ calling stop device, and updating op
mode and stack.
As a result, cfg80211 is running rfkill sync work that shuts
down all devices (second path).
In the second path, we eventually get to iwl_mvm_stop_device
which calls iwl_fw_dump_conf_clear->iwl_fw_dbg_stop_recording,
that access periphery registers.
The device may be stopped at this point from the first path,
which will result with a failure to access those registers.
Simply checking for the trans status is insufficient, since
the race will still exist, only minimized.
Instead, move the stop from iwl_fw_dump_conf_clear (which is
getting called only from stop path) to the transport stop
device function, where the access is always safe.
This has the added value, of actually stopping dbgc before
stopping device even when the stop is initiated from the
transport.

Fixes: 1efc3843a4ee ("iwlwifi: stop dbgc recording before stopping DMA")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif type

[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ]

The MONITOR type is missing in the interface type switch.
Add it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg

[ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ]

_vreg_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _vreg_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: aa4976130934 ("ufs: Add regulator enable support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path

[ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ]

As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again.  We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.

Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:

  aac_src_intr_message+0xf8/0x740 [aacraid]
  __free_irq+0x33c/0x4a0
  free_irq+0x78/0xb0
  aac_free_irq+0x13c/0x150 [aacraid]
  aac_reset_adapter+0x2e8/0x970 [aacraid]
  aac_eh_reset+0x3a8/0x5d0 [aacraid]
  scsi_try_host_reset+0x74/0x180
  scsi_eh_ready_devs+0xc70/0x1510
  scsi_error_handler+0x624/0xa20

This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix memory leak triggered by perf --namespace

[ Upstream commit 0e18dd12064e07519f7cbff4149ca7fff620cbed ]

perf with --namespace key leaks various memory objects including namespaces

  4.14.0+
  pid_namespace          1     12   2568   12    8
  user_namespace         1     39    824   39    8
  net_namespace          1      5   6272    5    8

This happen because perf_fill_ns_link_info() struct patch ns_path:
during initialization ns_path incremented counters on related mnt and dentry,
but without lost path_put nobody decremented them back.
Leaked dentry is name of related namespace,
and its leak does not allow to free unused namespace.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: commit e422267322cd ("perf: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/r/c510711b-3904-e5e1-d296-61273d21118d@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: Properly retry failed dquot items in case of error during buffer writeback

[ Upstream commit 373b0589dc8d58bc09c9a28d03611ae4fb216057 ]

Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.

Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.

This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.

Tested with the recently test-case sent to fstests list by Hou Tao.

Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: ubsan fixes

[ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ]

Fix some complaints from the UBSAN about signed integer addition overflows.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: displays: panel-dpi: add backlight dependency

[ Upstream commit 499ec0ed5eb2f6a7fcaab2dd66ffc5993484bda9 ]

The new backlight code causes a link failure when backlight
support itself is disabled:

drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'

This adds a Kconfig dependency like we have for the other OMAP
display targets.

Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Fix error handling path in 'omap_dmm_probe()'

[ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ]

If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.

Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix 1-lane behavior

[ Upstream commit 4dbd6c03fbf88299c573d676838896c6e06aade2 ]

Use drm_dp_channel_eq_ok helper

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix AUXDATAn registers access

[ Upstream commit 9217c1abbc145a77d65c476cf2004a3df02104c7 ]

First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix timing calculations

[ Upstream commit 66d1c3b94d5d59e4325e61a78d520f92c043d645 ]

Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix DP0_MISC register set

[ Upstream commit f3b8adbe1911f66fd3cab1aaa74f0f66b7ceda25 ]

Remove shift from TU_SIZE_RECOMMENDED define as it used to
calculate max_tu_symbols.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: filter out too high modes

[ Upstream commit 99fc8e963a4c0203dba26a77cf737db6081bca14 ]

Pixel clock limitation for DPI is 154 MHz. Do not accept modes
with higher pixel clock rate.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: do no fail on hi-res displays

[ Upstream commit cffd2b16c01c3431a7a7dd62e722af33490fc436 ]

Do not fail data rates higher than 2.7 and more than 2 lanes.
Try to fall back to 2.7Gbps and 2 lanes.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: Fix lvds-encoder since the panel_bridge rework.

[ Upstream commit dbb58bfd9ae6c885b2ca001a9a5ab8b881fb4ba9 ]

The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node.  Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.

This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri
dge.")
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemleak: add scheduling point to kmemleak_scan()

[ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ]

kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup.  We have seen a soft lockup when
do scan while compile kernel:

  watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
 [...]
  Call Trace:
   kmemleak_scan+0x21a/0x4c0
   kmemleak_write+0x312/0x350
   full_proxy_write+0x5a/0xa0
   __vfs_write+0x33/0x150
   vfs_write+0xad/0x1a0
   SyS_write+0x52/0xc0
   do_syscall_64+0x61/0x1a0
   entry_SYSCALL64_slow_path+0x25/0x25

Fix this by adding cond_resched every MAX_SCAN_SIZE.

Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>