firmware/brcm/brcmfmac43340-sdio.txt

   1 #X205_AP6234A_NVRAM_V1.4.7_20140730_WIN8.1_WW.txt
   2 # 20140731 v1.4.7
   3 # Initial version for X205
   4 manfid=0x2d0
   5 prodid=0x0653
   6 vendid=0x14e4
   7 devid=0x4386
   8 boardtype=0x0653
   9 boardrev=0x1203
  10 boardnum=22
  11 macaddr=00:90:4c:c5:12:38
  12 sromrev=3
  13 #boardflags:
  14 # bit 19 3tswitch:   2.4GHz FEM: SP3T switch share with BT
  15 # bit 16         nopa:   no external pa
  16 # keep original 0x200
  17 boardflags=0x0090201
  18 xtalfreq=37400
  19 nocrc=1
  20 ag0=255
  21 aa2g=1
  22 ccode=XV
  23 regrev=1
  24 pa0itssit=0x20
  25 #PA parameters for 2.4GHz
  26 pa0b0=7086
  27 pa0b1=-842
  28 pa0b2=-162
  29 tssifloor2g=63
  30 # rssi params for 2.4GHz
  31 rssismf2g=0xf
  32 rssismc2g=0x8
  33 rssisav2g=0x1
  34 cckPwrOffset=3
  35 # rssi params for 5GHz
  36 rssismf5g=0xf
  37 rssismc5g=0x7
  38 #rssisav5g=0x1
  39 rssisav5g=0x3
  40 #PA parameters for lower a-band
  41 pa1lob0=0x16D9
  42 pa1lob1=0xFD47
  43 pa1lob2=0xFF4E
  44 tssifloor5gl=32
  45 #PA parameters for midband
  46 pa1b0=0x15FF
  47 pa1b1=0xFD77
  48 pa1b2=0xFF75
  49 tssifloor5gm=34
  50 #PA paramasdeters for high band
  51 pa1hib0=0x158D
  52 pa1hib1=0xFD7D
  53 pa1hib2=0xFF6C
  54 tssifloor5gh=32
  55 rxpo5g=0
  56 maxp2ga0=80
  57 #  19.5dBm max; 18dBm target
  58 #Per rate power back-offs for g band, in .5 dB steps. Set it once you have the right numbers.
  59 cck2gpo=0x6666
  60 ofdm2gpo=0xaaaa6666
  61 # R54 16dBm; R48 17dBm; others 18dBm
  62 mcs2gpo0=0x5555
  63 # M0~ M4 17dBm
  64 mcs2gpo1=0xcccc
  65 # M5M6 15dBm; M7 14.5dBm
  66 #max power for 5G
  67 maxp5ga0=68
  68 # 16dBm target; 17.5dBm Max
  69 maxp5gla0=68
  70 maxp5gha0=68
  71 #Per rate power back-offs for a band, in .5 dB steps. Set it once you have the right numbers.
  72 ofdm5gpo=0x44441111
  73 # R54 13.5dBm
  74 ofdm5glpo=0x44441111
  75 ofdm5ghpo=0x55551111
  76 mcs5gpo0=0x0000
  77 # M0~M4 16dBm (1dB higher than ofdm)
  78 mcs5gpo1=0x5555
  79 # M5M6 13.5dBm; M7 12dBm
  80 mcs5glpo0=0x0000
  81 mcs5glpo1=0x5555
  82 mcs5ghpo0=0x0000
  83 mcs5ghpo1=0x5555
  84 # Parameters for DAC2x mode and ALPF bypass
  85 # RF SW Truth Table: ctrl0 for BT_TX; ctrl1 or 5G Tx; ctrl2 for 5G Rx; Ctrl3 for 2G Tx; Ctrl4 for 2G Rx
  86 swctrlmap_2g=0x00080008,0x00100010,0x00080008,0x011010,0x11f
  87 swctrlmap_5g=0x00040004,0x00020002,0x00040004,0x011010,0x2fe
  88 gain=32
  89 triso2g=8
  90 triso5g=8
  91 #tx parameters
  92 loflag=0
  93 iqlocalidx5g=40
  94 dlocalidx5g=70
  95 iqcalidx5g=50
  96 lpbckmode5g=1
  97 txiqlopapu5g=0
  98 txiqlopapu2g=0
  99 dlorange_lowlimit=5
 100 txalpfbyp=1
 101 txalpfpu=1
 102 dacrate2xen=1
 103 papden2g=1
 104 papden5g=1
 105 #rx parameters
 106 gain_settle_dly_2g=4
 107 gain_settle_dly_5g=4
 108 noise_cal_po_2g=-1
 109 noise_cal_po_40_2g=-1
 110 noise_cal_high_gain_2g=73
 111 noise_cal_nf_substract_val_2g=346
 112 noise_cal_po_5g=-1
 113 noise_cal_po_40_5g=-1
 114 noise_cal_high_gain_5g=73
 115 noise_cal_nf_substract_val_5g=346
 116 cckpapden=0
 117
 118 sd_gpout=4
 119 sd_gpval=1
 120 sd_gpdc=0
 121 aci_detect_en_2g=1
 122 interference=3
 123 #BTC params
 124 btc_flags=71
 125 btc_params8=15000
 126 btc_params22=8000
 127 btc_params83=20000
 128 btc_params84=10000