Update firmwares of rtl8723bs_bt

Reported-by: youling 257 <youling257@gmail.com>
Tested-by: XiaoTao Liu <kevin.liu912@gmail.com>

diff --git a/brcm/BCM4343A0.hcd b/brcm/BCM4343A0.hcd
new file mode 100644 (file)
index 0000000..ab9bf43
Binary files /dev/null and b/brcm/BCM4343A0.hcd differ

diff --git a/brcm/brcmfmac43430a0-sdio.jumper-EZpad.txt b/brcm/brcmfmac43430a0-sdio.jumper-EZpad.txt
new file mode 100644 (file)
index 0000000..2d860b5
--- /dev/null
+++ b/brcm/brcmfmac43430a0-sdio.jumper-EZpad.txt
@@ -0,0 +1,56 @@
+# NVRAM file for BCM943430WLSELG
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+xtalfreq=26000
+nocrc=1
+ag0=255
+aa2g=1
+ccode=CN
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,6009,-726
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=78
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+#papdvalidtest=3
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#Out-of-band GPIO Wakeup
+sd_gpout=0
+sd_gpval=1
+sd_gpdc=0
+rssicorrnorm=15
\ No newline at end of file

diff --git a/rtl_bt/rtl8723bs_config-OBDA8723.bin b/rtl_bt/rtl8723bs_config-OBDA8723.bin
index c20970a..8ba309c 100644 (file)
Binary files a/rtl_bt/rtl8723bs_config-OBDA8723.bin and b/rtl_bt/rtl8723bs_config-OBDA8723.bin differ

diff --git a/rtl_bt/rtl8723bs_fw.bin b/rtl_bt/rtl8723bs_fw.bin
index 5f77f80..b73ad83 100644 (file)
Binary files a/rtl_bt/rtl8723bs_fw.bin and b/rtl_bt/rtl8723bs_fw.bin differ