)
# List of targets with JIT support:
-set(LLVM_TARGETS_WITH_JIT X86 PowerPC ARM Mips)
+set(LLVM_TARGETS_WITH_JIT X86 PowerPC ARM Mips SystemZ)
set(LLVM_TARGETS_TO_BUILD "all"
CACHE STRING "Semicolon-separated list of targets to build, or \"all\".")
hexagon-*) llvm_cv_target_arch="Hexagon" ;;
mblaze-*) llvm_cv_target_arch="MBlaze" ;;
nvptx-*) llvm_cv_target_arch="NVPTX" ;;
+ s390x-*) llvm_cv_target_arch="SystemZ" ;;
*) llvm_cv_target_arch="Unknown" ;;
esac])
msp430-*) host_arch="MSP430" ;;
hexagon-*) host_arch="Hexagon" ;;
mblaze-*) host_arch="MBlaze" ;;
+ s390x-*) host_arch="SystemZ" ;;
*) host_arch="Unknown" ;;
esac
Hexagon) AC_SUBST(TARGET_HAS_JIT,0) ;;
MBlaze) AC_SUBST(TARGET_HAS_JIT,0) ;;
NVPTX) AC_SUBST(TARGET_HAS_JIT,0) ;;
+ SystemZ) AC_SUBST(TARGET_HAS_JIT,1) ;;
*) AC_SUBST(TARGET_HAS_JIT,0) ;;
esac
fi
AC_ARG_ENABLE([targets],AS_HELP_STRING([--enable-targets],
[Build specific host targets: all or target1,target2,... Valid targets are:
host, x86, x86_64, sparc, powerpc, arm, aarch64, mips, hexagon,
- xcore, msp430, nvptx, and cpp (default=all)]),,
+ xcore, msp430, nvptx, systemz, and cpp (default=all)]),,
enableval=all)
if test "$enableval" = host-only ; then
enableval=host
hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
mblaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
nvptx) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ systemz) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
host) case "$llvm_cv_target_arch" in
x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
MSP430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
Hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
NVPTX) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ SystemZ) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
*) AC_MSG_ERROR([Can not set target to build]) ;;
esac ;;
*) AC_MSG_ERROR([Unrecognized target $a_target]) ;;
set(LLVM_NATIVE_ARCH MSP430)
elseif (LLVM_NATIVE_ARCH MATCHES "hexagon")
set(LLVM_NATIVE_ARCH Hexagon)
+elseif (LLVM_NATIVE_ARCH MATCHES "s390x")
+ set(LLVM_NATIVE_ARCH SystemZ)
else ()
message(FATAL_ERROR "Unknown architecture ${LLVM_NATIVE_ARCH}")
endif ()
--enable-targets Build specific host targets: all or
target1,target2,... Valid targets are: host, x86,
x86_64, sparc, powerpc, arm, aarch64, mips, hexagon,
- xcore, msp430, nvptx, and cpp (default=all)
+ xcore, msp430, nvptx, systemz, and cpp (default=all)
--enable-experimental-targets
Build experimental host targets: disable or
target1,target2,... (default=disable)
hexagon-*) llvm_cv_target_arch="Hexagon" ;;
mblaze-*) llvm_cv_target_arch="MBlaze" ;;
nvptx-*) llvm_cv_target_arch="NVPTX" ;;
+ s390x-*) llvm_cv_target_arch="SystemZ" ;;
*) llvm_cv_target_arch="Unknown" ;;
esac
fi
msp430-*) host_arch="MSP430" ;;
hexagon-*) host_arch="Hexagon" ;;
mblaze-*) host_arch="MBlaze" ;;
+ s390x-*) host_arch="SystemZ" ;;
*) host_arch="Unknown" ;;
esac
;;
NVPTX) TARGET_HAS_JIT=0
;;
+ SystemZ) TARGET_HAS_JIT=1
+ ;;
*) TARGET_HAS_JIT=0
;;
esac
hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
mblaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
nvptx) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ systemz) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
host) case "$llvm_cv_target_arch" in
x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
MSP430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
Hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
NVPTX) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ SystemZ) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
*) { { echo "$as_me:$LINENO: error: Can not set target to build" >&5
echo "$as_me: error: Can not set target to build" >&2;}
{ (exit 1); exit 1; }; } ;;
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10532 "configure"
+#line 10538 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
case. The current set of targets is:
``arm, cpp, hexagon, mblaze, mips, mipsel, msp430, powerpc, ptx, sparc, spu,
- x86, x86_64, xcore``.
+ systemz, x86, x86_64, xcore``.
``--enable-doxygen``
hexagon-*) llvm_cv_target_arch="Hexagon" ;;
mblaze-*) llvm_cv_target_arch="MBlaze" ;;
nvptx-*) llvm_cv_target_arch="NVPTX" ;;
+ s390x-*) llvm_cv_target_arch="SystemZ" ;;
*) llvm_cv_target_arch="Unknown" ;;
esac])
Hexagon) AC_SUBST(TARGET_HAS_JIT,0) ;;
MBlaze) AC_SUBST(TARGET_HAS_JIT,0) ;;
NVPTX) AC_SUBST(TARGET_HAS_JIT,0) ;;
+ SystemZ) AC_SUBST(TARGET_HAS_JIT,1) ;;
*) AC_SUBST(TARGET_HAS_JIT,0) ;;
esac
fi
AC_ARG_ENABLE([targets],AS_HELP_STRING([--enable-targets],
[Build specific host targets: all or target1,target2,... Valid targets are:
host, x86, x86_64, sparc, powerpc, arm, mips, spu, hexagon,
- xcore, msp430, nvptx, and cpp (default=all)]),,
+ xcore, msp430, nvptx, systemz, and cpp (default=all)]),,
enableval=all)
if test "$enableval" = host-only ; then
enableval=host
cpp) TARGETS_TO_BUILD="CppBackend $TARGETS_TO_BUILD" ;;
mblaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
nvptx) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ systemz) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
host) case "$llvm_cv_target_arch" in
x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
MSP430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
Hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
NVPTX) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ SystemZ) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
*) AC_MSG_ERROR([Can not set target to build]) ;;
esac ;;
*) AC_MSG_ERROR([Unrecognized target $a_target]) ;;
--enable-targets Build specific host targets: all or
target1,target2,... Valid targets are: host, x86,
x86_64, sparc, powerpc, arm, mips, spu, hexagon,
- xcore, msp430, nvptx, and cpp (default=all)
+ xcore, msp430, nvptx, systemz, and cpp (default=all)
--enable-bindings Build specific language bindings:
all,auto,none,{binding-name} (default=auto)
--enable-libffi Check for the presence of libffi (default is NO)
hexagon-*) llvm_cv_target_arch="Hexagon" ;;
mblaze-*) llvm_cv_target_arch="MBlaze" ;;
nvptx-*) llvm_cv_target_arch="NVPTX" ;;
+ s390x-*) llvm_cv_target_arch="SystemZ" ;;
*) llvm_cv_target_arch="Unknown" ;;
esac
fi
;;
NVPTX) TARGET_HAS_JIT=0
;;
+ SystemZ) TARGET_HAS_JIT=1
+ ;;
*) TARGET_HAS_JIT=0
;;
esac
cpp) TARGETS_TO_BUILD="CppBackend $TARGETS_TO_BUILD" ;;
mblaze) TARGETS_TO_BUILD="MBlaze $TARGETS_TO_BUILD" ;;
nvptx) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ systemz) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
host) case "$llvm_cv_target_arch" in
x86) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
x86_64) TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
MSP430) TARGETS_TO_BUILD="MSP430 $TARGETS_TO_BUILD" ;;
Hexagon) TARGETS_TO_BUILD="Hexagon $TARGETS_TO_BUILD" ;;
NVPTX) TARGETS_TO_BUILD="NVPTX $TARGETS_TO_BUILD" ;;
+ SystemZ) TARGETS_TO_BUILD="SystemZ $TARGETS_TO_BUILD" ;;
*) { { echo "$as_me:$LINENO: error: Can not set target to build" >&5
echo "$as_me: error: Can not set target to build" >&2;}
{ (exit 1); exit 1; }; } ;;
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10356 "configure"
+#line 10361 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H