1 /******************************************************************************
3 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
19 ******************************************************************************/
24 #include <osdep_service.h>
25 #include <drv_types.h>
27 #define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
29 #define LED_BLINK_NORMAL_INTERVAL 100
30 #define LED_BLINK_SLOWLY_INTERVAL 200
31 #define LED_BLINK_LONG_INTERVAL 400
33 #define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
34 #define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500
35 #define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150
36 #define LED_BLINK_FASTER_INTERVAL_ALPHA 50
37 #define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
39 #define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
40 #define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
42 #define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
43 #define LED_BLINK_NORMAL_INTERVAL_PORNET 100
45 #define LED_BLINK_FAST_INTERVAL_BITLAND 30
47 // 060403, rcnjko: Customized for AzWave.
48 #define LED_CM2_BLINK_ON_INTERVAL 250
49 #define LED_CM2_BLINK_OFF_INTERVAL 4750
51 #define LED_CM8_BLINK_INTERVAL 500 //for QMI
52 #define LED_CM8_BLINK_OFF_INTERVAL 3750 //for QMI
54 // 080124, lanhsin: Customized for RunTop
55 #define LED_RunTop_BLINK_INTERVAL 300
57 // 060421, rcnjko: Customized for Sercomm Printer Server case.
58 #define LED_CM3_BLINK_INTERVAL 1500
60 typedef enum _LED_CTL_MODE{
66 LED_CTL_SITE_SURVEY = 6,
67 LED_CTL_POWER_OFF = 7,
68 LED_CTL_START_TO_LINK = 8,
69 LED_CTL_START_WPS = 9,
70 LED_CTL_STOP_WPS = 10,
71 LED_CTL_START_WPS_BOTTON = 11, //added for runtop
72 LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA
73 LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
74 LED_CTL_CONNECTION_NO_TRANSFER = 14,
77 typedef enum _LED_STATE_871x{
83 LED_BLINK_POWER_ON = 5,
84 LED_BLINK_SCAN = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
85 LED_BLINK_NO_LINK = 7, // LED is blinking during no link state.
86 LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case
88 LED_BLINK_WPS = 10, // LED is blinkg during WPS communication
89 LED_BLINK_WPS_STOP = 11, //for ALPHA
90 LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN
91 LED_BLINK_RUNTOP = 13, // Customized for RunTop
94 LED_BLINK_ALWAYS_ON = 16,
97 typedef enum _LED_PIN_871x{
105 typedef struct _LED_871x{
108 LED_PIN_871x LedPin; // Identify how to implement this SW led.
109 LED_STATE_871x CurrLedState; // Current LED state.
110 LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
112 u8 bLedOn; // true if LED is ON, false if LED is OFF.
114 u8 bLedBlinkInProgress; // true if it is blinking, false o.w..
116 u8 bLedWPSBlinkInProgress;
118 u32 BlinkTimes; // Number of times to toggle led state for blinking.
120 _timer BlinkTimer; // Timer object for led blinking.
122 #if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
125 // ALPHA, added by chiyoko, 20090106
126 u8 bLedNoLinkBlinkInProgress;
127 u8 bLedLinkBlinkInProgress;
128 u8 bLedStartToLinkBlinkInProgress;
129 u8 bLedScanBlinkInProgress;
131 _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
132 #endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
134 #if defined(CONFIG_PCI_HCI)
135 u8 bLedSlowBlinkInProgress;//added by vivi, for led new mode
138 } LED_871x, *PLED_871x;
140 #if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
142 #define IS_LED_WPS_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \
143 || ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \
144 || ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress)
146 #define IS_LED_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \
147 ||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress)
149 //================================================================================
150 // LED customization.
151 //================================================================================
153 typedef enum _LED_STRATEGY_871x{
154 SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option.
155 SW_LED_MODE1= 1, // 2 LEDs, through LED0 and LED1. For ALPHA.
156 SW_LED_MODE2 = 2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
157 SW_LED_MODE3 = 3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
158 SW_LED_MODE4 = 4, //for Edimax / Belkin
159 SW_LED_MODE5 = 5, //for Sercomm / Belkin
160 SW_LED_MODE6 = 6, //for 88CU minicard, porting from ce SW_LED_MODE7
161 HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
163 }LED_STRATEGY_871x, *PLED_STRATEGY_871x;
168 LED_CTL_MODE LedAction
170 #endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
172 #if defined(CONFIG_PCI_HCI)
173 //================================================================================
174 // LED customization.
175 //================================================================================
177 typedef enum _LED_STRATEGY_871x{
178 SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option.
179 SW_LED_MODE1 = 1, // SW control for PCI Express
180 SW_LED_MODE2 = 2, // SW control for Cameo.
181 SW_LED_MODE3 = 3, // SW contorl for RunTop.
182 SW_LED_MODE4 = 4, // SW control for Netcore
183 SW_LED_MODE5 = 5, //added by vivi, for led new mode, DLINK
184 SW_LED_MODE6 = 6, //added by vivi, for led new mode, PRONET
185 SW_LED_MODE7 = 7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
186 SW_LED_MODE8 = 8, //added by chiyokolin, for QMI
187 SW_LED_MODE9 = 9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1
188 SW_LED_MODE10 = 10, //added by chiyokolin, for Edimax-ASUS
189 HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
191 }LED_STRATEGY_871x, *PLED_STRATEGY_871x;
192 #endif //defined(CONFIG_PCI_HCI)
195 /* add for led controll */
198 LED_STRATEGY_871x LedStrategy;
200 void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
201 /* add for led controll */
205 #define rtw_led_control(adapter, LedAction) \
207 if((adapter)->ledpriv.LedControlHandler) \
208 (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
210 #else //CONFIG_SW_LED
211 #define rtw_led_control(adapter, LedAction)
212 #endif //CONFIG_SW_LED
214 void BlinkTimerCallback(void *data);
215 void BlinkWorkItemCallback(struct work_struct *work);
217 void ResetLedStatus(PLED_871x pLed);
232 extern void BlinkHandler(PLED_871x pLed);
234 #endif //__RTW_LED_H_