surface_state_offset);
}
+/*
+ * the idea of conversion between qp and qstep comes from scaling process
+ * of transform coeff for Luma component in H264 spec.
+ * 2^(Qpy / 6 - 6)
+ * In order to avoid too small qstep, it is multiplied by 16.
+ */
+static float intel_h264_qp_qstep(int qp)
+{
+ float value, qstep;
+ value = qp;
+ value = value / 6 - 2;
+ qstep = powf(2, value);
+ return qstep;
+}
+
+static int intel_h264_qstep_qp(float qstep)
+{
+ float qp;
+
+ qp = 12.0f + 6.0f * log2f(qstep);
+
+ return floorf(qp);
+}
+
+/*
+ * Currently it is based on the following assumption:
+ * SUM(roi_area * 1 / roi_qstep) + non_area * 1 / nonroi_qstep =
+ * total_aread * 1 / baseqp_qstep
+ *
+ * qstep is the linearized quantizer of H264 quantizer
+ */
+typedef struct {
+ int row_start_in_mb;
+ int row_end_in_mb;
+ int col_start_in_mb;
+ int col_end_in_mb;
+
+ int width_mbs;
+ int height_mbs;
+
+ int roi_qp;
+} ROIRegionParam;
+
+static void
+intel_h264_enc_roi_cbr(VADriverContextP ctx,
+ int base_qp,
+ VAEncMiscParameterBufferROI *pMiscParamROI,
+ struct encode_state *encode_state,
+ struct intel_encoder_context *encoder_context)
+{
+ int nonroi_qp;
+ VAEncROI *region_roi;
+ bool quickfill = 0;
+
+ ROIRegionParam param_regions[I965_MAX_NUM_ROI_REGIONS];
+ int num_roi;
+ int i,j;
+
+ float temp;
+ float qstep_nonroi, qstep_base;
+ float roi_area, total_area, nonroi_area;
+ float sum_roi;
+
+ VAEncSequenceParameterBufferH264 *pSequenceParameter = (VAEncSequenceParameterBufferH264 *)encode_state->seq_param_ext->buffer;
+ int width_in_mbs = pSequenceParameter->picture_width_in_mbs;
+ int height_in_mbs = pSequenceParameter->picture_height_in_mbs;
+ int mbs_in_picture = width_in_mbs * height_in_mbs;
+
+ struct gen6_vme_context *vme_context = encoder_context->vme_context;
+
+ num_roi = (pMiscParamROI->num_roi > I965_MAX_NUM_ROI_REGIONS) ? I965_MAX_NUM_ROI_REGIONS : pMiscParamROI->num_roi;
+
+ /* when the base_qp is lower than 12, the quality is quite good based
+ * on the H264 test experience.
+ * In such case it is unnecessary to adjust the quality for ROI region.
+ */
+ if (base_qp <= 12) {
+ nonroi_qp = base_qp;
+ quickfill = 1;
+ goto qp_fill;
+ }
+
+ /* currently roi_value_is_qp_delta is the only supported mode of priority.
+ *
+ * qp_delta set by user is added to base_qp, which is then clapped by
+ * [base_qp-min_delta, base_qp+max_delta].
+ */
+ assert (pMiscParamROI->roi_flags.bits.roi_value_is_qp_delta);
+
+ sum_roi = 0.0f;
+ roi_area = 0;
+ for (i = 0; i < num_roi; i++) {
+ int row_start, row_end, col_start, col_end;
+ int roi_width_mbs, roi_height_mbs;
+ int mbs_in_roi;
+ int roi_qp;
+ float qstep_roi;
+
+ region_roi = (VAEncROI *)pMiscParamROI->roi + i;
+
+ col_start = region_roi->roi_rectangle.x;
+ col_end = col_start + region_roi->roi_rectangle.width;
+ row_start = region_roi->roi_rectangle.y;
+ row_end = row_start + region_roi->roi_rectangle.height;
+ col_start = col_start / 16;
+ col_end = (col_end + 15) / 16;
+ row_start = row_start / 16;
+ row_end = (row_end + 15) / 16;
+
+ roi_width_mbs = col_end - col_start;
+ roi_height_mbs = row_end - row_start;
+ mbs_in_roi = roi_width_mbs * roi_height_mbs;
+
+ param_regions[i].row_start_in_mb = row_start;
+ param_regions[i].row_end_in_mb = row_end;
+ param_regions[i].col_start_in_mb = col_start;
+ param_regions[i].col_end_in_mb = col_end;
+ param_regions[i].width_mbs = roi_width_mbs;
+ param_regions[i].height_mbs = roi_height_mbs;
+
+ roi_qp = base_qp + region_roi->roi_value;
+ BRC_CLIP(roi_qp, 1, 51);
+
+ param_regions[i].roi_qp = roi_qp;
+ qstep_roi = intel_h264_qp_qstep(roi_qp);
+
+ roi_area += mbs_in_roi;
+ sum_roi += mbs_in_roi / qstep_roi;
+ }
+
+ total_area = mbs_in_picture;
+ nonroi_area = total_area - roi_area;
+
+ qstep_base = intel_h264_qp_qstep(base_qp);
+ temp = (total_area / qstep_base - sum_roi);
+
+ if (temp < 0) {
+ nonroi_qp = 51;
+ } else {
+ qstep_nonroi = nonroi_area / temp;
+ nonroi_qp = intel_h264_qstep_qp(qstep_nonroi);
+ }
+
+ BRC_CLIP(nonroi_qp, 1, 51);
+
+qp_fill:
+ memset(vme_context->qp_per_mb, nonroi_qp, mbs_in_picture);
+ if (!quickfill) {
+ char *qp_ptr;
+
+ for (i = 0; i < num_roi; i++) {
+ for (j = param_regions[i].row_start_in_mb; j < param_regions[i].row_end_in_mb; j++) {
+ qp_ptr = vme_context->qp_per_mb + (j * width_in_mbs) + param_regions[i].col_start_in_mb;
+ memset(qp_ptr, param_regions[i].roi_qp, param_regions[i].width_mbs);
+ }
+ }
+ }
+ return ;
+}
+
extern void
intel_h264_enc_roi_config(VADriverContextP ctx,
struct encode_state *encode_state,
struct intel_encoder_context *encoder_context)
{
+ char *qp_ptr;
+ int i, j;
+ VAEncROI *region_roi;
VAEncMiscParameterBuffer* pMiscParamROI;
VAEncMiscParameterBufferROI *pParamROI;
struct gen6_vme_context *vme_context = encoder_context->vme_context;
int width_in_mbs = pSequenceParameter->picture_width_in_mbs;
int height_in_mbs = pSequenceParameter->picture_height_in_mbs;
+ int row_start, row_end, col_start, col_end;
+ int num_roi;
+
vme_context->roi_enabled = 0;
/* Restriction: Disable ROI when multi-slice is enabled */
if (!encoder_context->context_roi || (encode_state->num_slice_params_ext > 1))
pParamROI = (VAEncMiscParameterBufferROI *)pMiscParamROI->data;
/* check whether number of ROI is correct */
- /* currently one region is supported */
- if (pParamROI->num_roi != 1) {
- return;
- }
+ num_roi = (pParamROI->num_roi > I965_MAX_NUM_ROI_REGIONS) ? I965_MAX_NUM_ROI_REGIONS : pParamROI->num_roi;
vme_context->roi_enabled = 1;
int slice_type = intel_avc_enc_slice_type_fixup(slice_param->slice_type);
qp = mfc_context->bit_rate_control_context[slice_type].QpPrimeY;
- memset(vme_context->qp_per_mb, qp, width_in_mbs * height_in_mbs);
+ intel_h264_enc_roi_cbr(ctx, qp, pParamROI,
+ encode_state, encoder_context);
+
} else if (encoder_context->rate_control_mode == VA_RC_CQP){
VAEncPictureParameterBufferH264 *pic_param = (VAEncPictureParameterBufferH264 *)encode_state->pic_param_ext->buffer;
VAEncSliceParameterBufferH264 *slice_param = (VAEncSliceParameterBufferH264 *)encode_state->slice_params_ext[0]->buffer;
qp = pic_param->pic_init_qp + slice_param->slice_qp_delta;
memset(vme_context->qp_per_mb, qp, width_in_mbs * height_in_mbs);
+
+
+ for (j = num_roi; j ; j--) {
+ int qp_delta, qp_clip;
+
+ region_roi = (VAEncROI *)pParamROI->roi + j - 1;
+
+ col_start = region_roi->roi_rectangle.x;
+ col_end = col_start + region_roi->roi_rectangle.width;
+ row_start = region_roi->roi_rectangle.y;
+ row_end = row_start + region_roi->roi_rectangle.height;
+
+ col_start = col_start / 16;
+ col_end = (col_end + 15) / 16;
+ row_start = row_start / 16;
+ row_end = (row_end + 15) / 16;
+
+ qp_delta = region_roi->roi_value;
+ qp_clip = qp + qp_delta;
+
+ BRC_CLIP(qp_clip, 1, 51);
+
+ for (i = row_start; i < row_end; i++) {
+ qp_ptr = vme_context->qp_per_mb + (i * width_in_mbs) + col_start;
+ memset(qp_ptr, qp_clip, (col_end - col_start));
+ }
+ }
} else {
/*
* TODO: Disable it for non CBR-CQP.
int num_attribs)
{
VAStatus va_status;
+ struct i965_driver_data *i965 = i965_driver_data(ctx);
int i;
va_status = i965_validate_config(ctx, profile, entrypoint);
break;
case VAConfigAttribEncROI:
- if ((entrypoint == VAEntrypointEncSliceLP) &&
- (profile == VAProfileH264ConstrainedBaseline ||
- profile == VAProfileH264Main ||
- profile == VAProfileH264High))
- attrib_list[i].value = 3;
- else
+ if (profile == VAProfileH264ConstrainedBaseline ||
+ profile == VAProfileH264Main ||
+ profile == VAProfileH264High) {
+ VAConfigAttribValEncROI *roi_config = (VAConfigAttribValEncROI *)&(attrib_list[i].value);
+
+ if(entrypoint == VAEntrypointEncSliceLP) {
+ roi_config->bits.num_roi_regions = 3;
+ roi_config->bits.roi_rc_priority_support = 0;
+ roi_config->bits.roi_rc_qp_delat_support = 0;
+ } else if (IS_GEN7(i965->intel.device_info)) {
+ roi_config->bits.num_roi_regions = I965_MAX_NUM_ROI_REGIONS;
+ roi_config->bits.roi_rc_priority_support = 0;
+ roi_config->bits.roi_rc_qp_delat_support = 1;
+ } else
+ roi_config->bits.num_roi_regions = 0;
+ }else {
attrib_list[i].value = 0;
+ }
break;
obj_context->codec_state.encode.num_packed_header_data_ext = 0;
obj_context->codec_state.encode.slice_index = 0;
obj_context->codec_state.encode.vps_sps_seq_index = 0;
+ /*
+ * Based on ROI definition in va/va.h, the ROI set through this
+ * structure is applicable only to the current frame or field.
+ * That is to say: it is on-the-fly setting. If it is not set,
+ * the current frame doesn't use ROI.
+ * It is uncertain whether the other misc buffer should be released.
+ * So only release the previous ROI buffer.
+ */
+ i965_release_buffer_store(&obj_context->codec_state.encode.misc_param[VAEncMiscParameterTypeROI]);
+
i965_release_buffer_store(&obj_context->codec_state.encode.encmb_map);
if (obj_config->profile == VAProfileVP9Profile0) {