ARM: efm32: switch to vendor,device compatible strings

The mainline drivers were fixed in commits

 - 4ea8dafd2475 (serial: efm32: use $vendor,$device scheme for
   compatible string)
 - 12f6dd860cf8 (spi: efm32: use $vendor,$device scheme for compatible
   string)
 - 63cc122381bd (clocksource: efm32: use $vendor,$device scheme for
   compatible string)

which are all in 3.16-rc1 to also support these compatible strings.

For the other affected peripherals (adc and gpio) there are no drivers in
mainline yet.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index 106d505..c747983 100644 (file)
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -23,7 +23,7 @@
 
        soc {
                adc: adc@40002000 {
-                       compatible = "efm32,adc";
+                       compatible = "energymicro,efm32-adc";
                        reg = <0x40002000 0x400>;
                        interrupts = <7>;
                        clocks = <&cmu clk_HFPERCLKADC0>;
@@ -31,7 +31,7 @@
                };
 
                gpio: gpio@40006000 {
-                       compatible = "efm32,gpio";
+                       compatible = "energymicro,efm32-gpio";
                        reg = <0x40006000 0x1000>;
                        interrupts = <1 11>;
                        gpio-controller;
@@ -45,7 +45,7 @@
                i2c0: i2c@4000a000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "efm32,i2c";
+                       compatible = "energymicro,efm32-i2c";
                        reg = <0x4000a000 0x400>;
                        interrupts = <9>;
                        clocks = <&cmu clk_HFPERCLKI2C0>;
@@ -56,7 +56,7 @@
                i2c1: i2c@4000a400 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "efm32,i2c";
+                       compatible = "energymicro,efm32-i2c";
                        reg = <0x4000a400 0x400>;
                        interrupts = <10>;
                        clocks = <&cmu clk_HFPERCLKI2C1>;
@@ -67,7 +67,7 @@
                spi0: spi@4000c000 { /* USART0 */
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "efm32,spi";
+                       compatible = "energymicro,efm32-spi";
                        reg = <0x4000c000 0x400>;
                        interrupts = <3 4>;
                        clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -77,7 +77,7 @@
                spi1: spi@4000c400 { /* USART1 */
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "efm32,spi";
+                       compatible = "energymicro,efm32-spi";
                        reg = <0x4000c400 0x400>;
                        interrupts = <15 16>;
                        clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -87,7 +87,7 @@
                spi2: spi@4000c800 { /* USART2 */
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "efm32,spi";
+                       compatible = "energymicro,efm32-spi";
                        reg = <0x4000c800 0x400>;
                        interrupts = <18 19>;
                        clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -95,7 +95,7 @@
                };
 
                uart0: uart@4000c000 { /* USART0 */
-                       compatible = "efm32,uart";
+                       compatible = "energymicro,efm32-uart";
                        reg = <0x4000c000 0x400>;
                        interrupts = <3 4>;
                        clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -103,7 +103,7 @@
                };
 
                uart1: uart@4000c400 { /* USART1 */
-                       compatible = "efm32,uart";
+                       compatible = "energymicro,efm32-uart";
                        reg = <0x4000c400 0x400>;
                        interrupts = <15 16>;
                        clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -111,7 +111,7 @@
                };
 
                uart2: uart@4000c800 { /* USART2 */
-                       compatible = "efm32,uart";
+                       compatible = "energymicro,efm32-uart";
                        reg = <0x4000c800 0x400>;
                        interrupts = <18 19>;
                        clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -119,7 +119,7 @@
                };
 
                uart3: uart@4000e000 { /* UART0 */
-                       compatible = "efm32,uart";
+                       compatible = "energymicro,efm32-uart";
                        reg = <0x4000e000 0x400>;
                        interrupts = <20 21>;
                        clocks = <&cmu clk_HFPERCLKUART0>;
@@ -127,7 +127,7 @@
                };
 
                uart4: uart@4000e400 { /* UART1 */
-                       compatible = "efm32,uart";
+                       compatible = "energymicro,efm32-uart";
                        reg = <0x4000e400 0x400>;
                        interrupts = <22 23>;
                        clocks = <&cmu clk_HFPERCLKUART1>;
@@ -135,28 +135,28 @@
                };
 
                timer0: timer@40010000 {
-                       compatible = "efm32,timer";
+                       compatible = "energymicro,efm32-timer";
                        reg = <0x40010000 0x400>;
                        interrupts = <2>;
                        clocks = <&cmu clk_HFPERCLKTIMER0>;
                };
 
                timer1: timer@40010400 {
-                       compatible = "efm32,timer";
+                       compatible = "energymicro,efm32-timer";
                        reg = <0x40010400 0x400>;
                        interrupts = <12>;
                        clocks = <&cmu clk_HFPERCLKTIMER1>;
                };
 
                timer2: timer@40010800 {
-                       compatible = "efm32,timer";
+                       compatible = "energymicro,efm32-timer";
                        reg = <0x40010800 0x400>;
                        interrupts = <13>;
                        clocks = <&cmu clk_HFPERCLKTIMER2>;
                };
 
                timer3: timer@40010c00 {
-                       compatible = "efm32,timer";
+                       compatible = "energymicro,efm32-timer";
                        reg = <0x40010c00 0x400>;
                        interrupts = <14>;
                        clocks = <&cmu clk_HFPERCLKTIMER3>;