USB: serial: ftdi_sio: add NovaTech OrionMX product ID

commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.

Add PID for the NovaTech OrionMX so it can be automatically detected.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.

During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests.  When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests.  Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)

Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.

If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful.  Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.

Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.

Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: ep0: fix NULL pointer exception

commit d00889080ab60051627dab1d85831cd9db750e2a upstream.

There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong
index back to the caller.

In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

commit 6490fa565534fa83593278267785a694fd378a2b upstream.

Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.

Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210528081613.730661-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_ncm: only first packet of aggregate needs to start timer

commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.

The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.

This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)

As such the first packet is now at most delayed by 300us.

Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.

This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: f_ncm: ncm_bitrate (speed) is unsigned

commit 3370139745853f7826895293e8ac3aec1430508e upstream.

[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup1: don't allow '\n' in renaming

commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.

cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument

But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/

Signed-off-by: Alexander Kuznetsov <wwfq@yandex-team.ru>
Reported-by: Andrey Krasichkov <buglloc@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return value from btrfs_mark_extent_written() in case of error

commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.

We always return 0 even in case of an error in btrfs_mark_extent_written().
Fix it to return proper error value in case of a failure. All callers
handle it.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Fix uninitialized variables

commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.

The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

  [ snip ]

[  457.271004] Backtrace:
[  457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: avoid speculation-based attacks from out-of-range memslot accesses

commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.

KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot.  The translation is
performed in __gfn_to_hva_memslot using the following formula:

      hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE

It is expected that gfn falls within the boundaries of the guest's
physical memory.  However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.

__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot.  While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva.  If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.

Right now it's not clear if there are any cases in which this is
exploitable.  One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86.  Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier.  However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space.  Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets.  Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.

Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached.  This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.

Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Lock pointer access in drm_master_release()

commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.

This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'

The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.

An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Fix use-after-free read in drm_getunique()

commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.

There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.

An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.

To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.

Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.

Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.

While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.

Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs

commit 93385546ba369182220436f60ceb3beabe4b7de1 upstream.

On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and
sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by VGEN5
vdd3p0: supplied by SW2
vdd2p5: supplied by VGEN5

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mpc: implement erratum A-004447 workaround

[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]

The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mpc: Make use of i2c_recover_bus()

[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]

Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]

The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]

The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: Fix missing error code in bnx2x_iov_init_one()

[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]

When update the latest mainline kernel with the following three configs,
the kernel hangs during startup:

(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y

When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:

echo "function_graph" > /sys/kernel/debug/tracing/current_tracer

Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.

I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.

By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing
is enabled").

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fabrics: decode host pathing error for connect

[ Upstream commit 4d9442bf263ac45d495bb7ecf75009e59c0622b2 ]

Add an additional decoding for 'host pathing error' during connect.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: appletalk: cops: Fix data race in cops_probe1

[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]

In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: ensure the device is available before accessing GEMGXL control registers

[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]

If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.

We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.

Changed in v2:
 - Use netif_running instead of its own flag

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR  qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR  qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR  qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.

Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: vmw_pvscsi: Set correct residual data length

[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]

Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.

Before (INQUIRY PAGE 0xB0 with 128B buffer):

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 128 bytes of data:
 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

After:

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

[mkp: clarified description]

Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bnx2fc: Return failure if io_req is already in ABTS processing

[ Upstream commit 122c81c563b0c1c6b15ff76a9159af5ee1f21563 ]

Return failure from bnx2fc_eh_abort() if io_req is already in ABTS
processing.

Link: https://lore.kernel.org/r/20210519061416.19321-1-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDS tcp loopback connection can hang

[ Upstream commit aced3ce57cd37b5ca332bcacd370d01f5a8c5371 ]

When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed

The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.

To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.

Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]

When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

The KASAN's log reveals it:

[    3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[    3.238748 ] 2 locks held by swapper/0/1:
[    3.239151 ]  #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[    3.240026 ]  #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[    3.240873 ] Modules linked in:
[    3.241187 ] irq event stamp: 460854
[    3.241541 ] hardirqs last  enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[    3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[    3.242245 ] softirqs last  enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[    3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[    3.242245 ] Preemption disabled at:
[    3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[    3.242245 ] Kernel panic - not syncing: scheduling while atomic
[    3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[    3.242245 ] Call Trace:
[    3.242245 ]  dump_stack+0xba/0xf5
[    3.242245 ]  ? ql3xxx_probe+0x1f0/0xea0
[    3.242245 ]  panic+0x15a/0x3f2
[    3.242245 ]  ? vprintk+0x76/0x150
[    3.242245 ]  ? ql3xxx_probe+0x2aa/0xea0
[    3.242245 ]  __schedule_bug+0xae/0xe0
[    3.242245 ]  __schedule+0x72e/0xa00
[    3.242245 ]  schedule+0x43/0xf0
[    3.242245 ]  schedule_timeout+0x28b/0x500
[    3.242245 ]  ? del_timer_sync+0xf0/0xf0
[    3.242245 ]  ? msleep+0x2f/0x70
[    3.242245 ]  msleep+0x59/0x70
[    3.242245 ]  ql3xxx_probe+0x307/0xea0
[    3.242245 ]  ? _raw_spin_unlock_irqrestore+0x3a/0x70
[    3.242245 ]  ? pci_device_remove+0x110/0x110
[    3.242245 ]  local_pci_probe+0x45/0xa0
[    3.242245 ]  pci_device_probe+0x12b/0x1d0
[    3.242245 ]  really_probe+0x2a9/0x610
[    3.242245 ]  driver_probe_device+0x90/0x1d0
[    3.242245 ]  ? mutex_lock_nested+0x1b/0x20
[    3.242245 ]  device_driver_attach+0x68/0x70
[    3.242245 ]  __driver_attach+0x124/0x1b0
[    3.242245 ]  ? device_driver_attach+0x70/0x70
[    3.242245 ]  bus_for_each_dev+0xbb/0x110
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  driver_attach+0x27/0x30
[    3.242245 ]  bus_add_driver+0x1eb/0x2a0
[    3.242245 ]  driver_register+0xa9/0x180
[    3.242245 ]  __pci_register_driver+0x82/0x90
[    3.242245 ]  ? yellowfin_init+0x25/0x25
[    3.242245 ]  ql3xxx_driver_init+0x23/0x25
[    3.242245 ]  do_one_initcall+0x7f/0x3d0
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.242245 ]  kernel_init_freeable+0x2aa/0x301
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  kernel_init+0x18/0x190
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ret_from_fork+0x1f/0x30
[    3.242245 ] Dumping ftrace buffer:
[    3.242245 ]    (ftrace buffer empty)
[    3.242245 ] Kernel Offset: disabled
[    3.242245 ] Rebooting in 1 seconds.

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wq: handle VM suspension in stall detection

[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]

If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.

wq_watchdog_timer_fn()
{
for_each_pool(pool, pi) {
if (time_after(jiffies, ts + thresh)) {
pr_emerg("BUG: workqueue lockup - pool");
}
}
}

Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: disable controllers at parse time

[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]

This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.

[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: NOMURA JUNICHI(野村　淳一) <junichi.nomura@nec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdiobus: get rid of a BUG_ON()

[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]

We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON().  Let's handle that situation more gracefully, and just print
a warning and return.

Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: disable IRQs for netlink_lock_table()

[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]

Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).

Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.

Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.

Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.

Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: init notify_work earlier to avoid uninitialized use

[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]

If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.

Always initialize the work struct earlier to avoid problems here.

Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.

Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isdn: mISDN: netjet: Fix crash in nj_probe:

[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]

'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[    3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[    3.355112 ] Modules linked in:
[    3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.356552 ] RIP: 0010:free_irq+0x100/0x480
[    3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.360652 ] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[    3.361170 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[    3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[    3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet

[ Upstream commit f0353e1f53f92f7b3da91e6669f5d58ee222ebe8 ]

The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet

[ Upstream commit 28c268d3acdd4cbcd2ac320b85609e77f84e74a7 ]

Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/nfc/rawsock.c: fix a permission check bug

[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]

The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().

Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: Track /proc/$pid/attr/ opener mm_struct

commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.

Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)

Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix endless multiplex timer

commit 90c91dfb86d0ff545bd329d3ddd72c147e2ae198 upstream.

Kan and Andi reported that we fail to kill rotation when the flexible
events go empty, but the context does not. XXX moar

Fixes: fd7d55172d1e ("perf/cgroups: Don't rotate events for cgroups unnecessarily")
Reported-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Wen Yang <wenyang@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20200305123851.GX2596@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.194

Link: https://lore.kernel.org/r/20210608175932.263480586@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210609062858.532803536@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-pciback: redo VF placement in the virtual topology

The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().

Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).

This is upstream commit 4ba50e7c423c29639878c00573288869aa627068.

Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to
separate virtual slots")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Optimize select_idle_cpu

commit 60588bfa223ff675b95f866249f90616613fbe31 upstream.

select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :

1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")

introduces a way to limit how many CPUs we scan.

But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.

Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.

Fixes: 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Signed-off-by: Yang Wei <yang.wei@linux.alibaba.com>
Tested-by: Yang Wei <yang.wei@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: EC: Look for ECDT EC after calling acpi_load_tables()

commit b1c0330823fe842dbb34641f1410f0afa51c29d3 upstream.

Some systems have had functional issues since commit 5a8361f7ecce
(ACPICA: Integrate package handling with module-level code) that,
among other things, changed the initial values of the
acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list
global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to
be called before acpi_load_tables() on the vast majority of platforms.

Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from
acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and
acpi_gbl_group_module_level_code was TRUE, which almost always was
the case as FALSE and TRUE were their initial values, respectively.
The acpi_gbl_parse_table_as_term_list value would be changed to TRUE
for a couple of platforms in acpi_quirks_dmi_table[], but it remained
FALSE in the vast majority of cases.

After commit 5a8361f7ecce, the initial values of the two flags have
been reversed, so in effect acpi_load_tables() has not been called
from acpi_early_init() any more.  That, in turn, affects
acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now
and it is not possible to evaluate the _REG method for the EC address
space handler installed by it.  That effectively causes the EC address
space to be inaccessible to AML on platforms with an ECDT matching the
EC device definition in the DSDT and functional problems ensue in
there.

Because the default behavior before commit 5a8361f7ecce was to call
acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to
do that again.  Moreover, the EC address space handler installed by
acpi_ec_ecdt_probe() is only needed for AML to be able to access the
EC address space and the only AML that can run during acpi_load_tables()
is module-level code which only is allowed to access address spaces
with default handlers (memory, I/O and PCI config space).

For this reason, move the acpi_ec_ecdt_probe() invocation back to
acpi_bus_init(), from where it was taken away by commit d737f333b211
(ACPI: probe ECDT before loading AML tables regardless of module-level
code flag), and put it after the invocation of acpi_load_tables() to
restore the original code ordering from before commit 5a8361f7ecce.

Fixes: 5a8361f7ecce ("ACPICA: Integrate package handling with module-level code")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981
Reported-by: step-ali <sunmooon15@gmail.com>
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Tested-by: Charles Stanhope <charles.stanhope@gmail.com>
Reported-by: Paulo Nascimento <paulo.ulusu@googlemail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Reported-by: Adam Harvey <adam@adamharvey.name>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laurențiu Păncescu <lpancescu@gmail.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: probe ECDT before loading AML tables regardless of module-level code flag

commit d737f333b211361b6e239fc753b84c3be2634aaa upstream.

It was discovered that AML tables were loaded before or after the
ECDT depending on acpi_gbl_execute_tables_as_methods. According to
the ACPI spec, the ECDT should be loaded before the namespace is
populated by loading AML tables (DSDT and SSDT). Since the ECDT
should be loaded early in the boot process, this change moves the
ECDT probing to acpi_early_init.

Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laurențiu Păncescu <lpancescu@gmail.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix debug register indexing

commit cb853ded1d25e5b026ce115dbcde69e3d7e2e831 upstream.

Commit 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on
reset") flipped the register number to 0 for all the debug registers
in the sysreg table, hereby indicating that these registers live
in a separate shadow structure.

However, the author of this patch failed to realise that all the
accessors are using that particular index instead of the register
encoding, resulting in all the registers hitting index 0. Not quite
a valid implementation of the architecture...

Address the issue by fixing all the accessors to use the CRm field
of the encoding, which contains the debug register index.

Fixes: 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset")
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode

commit 0884335a2e653b8a045083aa1d57ce74269ac81d upstream.

Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not
in 64-bit mode.  The APM states bits 63:32 are dropped for both DRs and
CRs:

  In 64-bit mode, the operand size is fixed at 64 bits without the need
  for a REX prefix. In non-64-bit mode, the operand size is fixed at 32
  bits and the upper 32 bits of the destination are forced to 0.

Fixes: 7ff76d58a9dc ("KVM: SVM: enhance MOV CR intercept handler")
Fixes: cae3797a4639 ("KVM: SVM: enhance mov DR intercept handler")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: manual backport to old file]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix unmountable seed device after fstrim

commit 5e753a817b2d5991dfe8a801b7b1e8e79a1c5a20 upstream.

The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.

Create a seed device and add a sprout device to it:

  $ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
  $ btrfstune -S 1 /dev/loop0
  $ mount /dev/loop0 /btrfs
  $ btrfs dev add -f /dev/loop1 /btrfs
  BTRFS info (device loop0): relocating block group 290455552 flags system
  BTRFS info (device loop0): relocating block group 1048576 flags system
  BTRFS info (device loop0): disk added /dev/loop1
  $ umount /btrfs

Mount the sprout device and run fstrim:

  $ mount /dev/loop1 /btrfs
  $ fstrim /btrfs
  $ umount /btrfs

Now try to mount the seed device, and it fails:

  $ mount /dev/loop0 /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.

Block 5292032 is missing on the readonly seed device:

 $ dmesg -kt | tail
 <snip>
 BTRFS error (device loop0): bad tree block start, want 5292032 have 0
 BTRFS warning (device loop0): couldn't read-tree root
 BTRFS error (device loop0): open_ctree failed

>From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:

  $ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
  <snip>
  item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
   block group used 114688 chunk_objectid 256 flags METADATA
  <snip>

>From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:

  $ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
  <snip>
  item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
   block group used 32768 chunk_objectid 256 flags METADATA
  <snip>

BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:

  kprobe:btrfs_discard_extent {
   printf("freeing start %llu end %llu num_bytes %llu:\n",
   arg1, arg1+arg2, arg2);
  }

  freeing start 5259264 end 5406720 num_bytes 147456
  <snip>

Fix this by avoiding the discard command to the readonly seed device.

Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix corner case in perf_rotate_context()

commit 7fa343b7fdc4f351de4e3f28d5c285937dd1f42f upstream.

In perf_rotate_context(), when the first cpu flexible event fail to
schedule, cpu_rotate is 1, while cpu_event is NULL. Since cpu_event is
NULL, perf_rotate_context will _NOT_ call cpu_ctx_sched_out(), thus
cpuctx->ctx.is_active will have EVENT_FLEXIBLE set. Then, the next
perf_event_sched_in() will skip all cpu flexible events because of the
EVENT_FLEXIBLE bit.

In the next call of perf_rotate_context(), cpu_rotate stays 1, and
cpu_event stays NULL, so this process repeats. The end result is, flexible
events on this cpu will not be scheduled (until another event being added
to the cpuctx).

Here is an easy repro of this issue. On Intel CPUs, where ref-cycles
could only use one counter, run one pinned event for ref-cycles, one
flexible event for ref-cycles, and one flexible event for cycles. The
flexible ref-cycles is never scheduled, which is expected. However,
because of this issue, the cycles event is never scheduled either.

 $ perf stat -e ref-cycles:D,ref-cycles,cycles -C 5 -I 1000

           time             counts unit events
    1.000152973         15,412,480      ref-cycles:D
    1.000152973      <not counted>      ref-cycles     (0.00%)
    1.000152973      <not counted>      cycles         (0.00%)
    2.000486957         18,263,120      ref-cycles:D
    2.000486957      <not counted>      ref-cycles     (0.00%)
    2.000486957      <not counted>      cycles         (0.00%)

To fix this, when the flexible_active list is empty, try rotate the
first event in the flexible_groups. Also, rename ctx_first_active() to
ctx_event_to_rotate(), which is more accurate.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8d5bce0c37fa ("perf/core: Optimize perf_rotate_context() event scheduling")
Link: https://lkml.kernel.org/r/20191008165949.920548-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/cgroups: Don't rotate events for cgroups unnecessarily

commit fd7d55172d1e2e501e6da0a5c1de25f06612dc2e upstream.

Currently perf_rotate_context assumes that if the context's nr_events !=
nr_active a rotation is necessary for perf event multiplexing. With
cgroups, nr_events is the total count of events for all cgroups and
nr_active will not include events in a cgroup other than the current
task's. This makes rotation appear necessary for cgroups when it is not.

Add a perf_event_context flag that is set when rotation is necessary.
Clear the flag during sched_out and set it when a flexible sched_in
fails due to resources.

Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20190601082722.44543-1-irogers@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Remove the setting of dev_port.

commit 1d86859fdf31a0d50cc82b5d0d6bfb5fe98f6c00 upstream.

The dev_port is meant to distinguish the network ports belonging to
the same PCI function.  Our devices only have one network port
associated with each PCI function and so we should not set it for
correctness.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Avoid running unprivileged tests with alignment requirements

commit c77b0589ca29ad1859fe7d7c1ecd63c0632379fa upstream

Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.

Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: add "any alignment" annotation for some tests

commit e2c6f50e48849298bed694de03cceb537d95cdc4 upstream

RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Apply F_NEEDS_EFFICIENT_UNALIGNED_ACCESS to more ACCEPT test cases.

commit 0a68632488aa0129ed530af9ae9e8573f5650812 upstream

If a testcase has alignment problems but is expected to be ACCEPT,
verify it using F_NEEDS_EFFICIENT_UNALIGNED_ACCESS too.

Maybe in the future if we add some architecture specific code to elide
the unaligned memory access warnings during the test, we can execute
these as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Make more use of 'any' alignment in test_verifier.c

commit 2acc5fd5b8c25df0de7f3c8b8e385f5c6f8202ec upstream

Use F_NEEDS_EFFICIENT_UNALIGNED_ACCESS in more tests where the
expected result is REJECT.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Adjust F_NEEDS_EFFICIENT_UNALIGNED_ACCESS handling in test_verifier.c

commit c7665702d3208b77b8e00f0699b6b88241b04360 upstream

Make it set the flag argument to bpf_verify_program() which will relax
the alignment restrictions.

Now all such test cases will go properly through the verifier even on
inefficient unaligned access architectures.

On inefficient unaligned access architectures do not try to run such
programs, instead mark the test case as passing but annotate the
result similarly to how it is done now in the presence of this flag.

So, we get complete full coverage for all REJECT test cases, and at
least verifier level coverage for ACCEPT test cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Add BPF_F_ANY_ALIGNMENT.

commit e9ee9efc0d176512cdce9d27ff8549d7ffa2bfcd upstream

Often we want to write tests cases that check things like bad context
offset accesses.  And one way to do this is to use an odd offset on,
for example, a 32-bit load.

This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS.  So the test
case see the alignment failure rather than what it was testing for.

It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.

Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Generalize dummy program types

commit 0c586079f852187d19fea60c9a4981ad29e22ba8 upstream

Don't hardcode the dummy program types to SOCKET_FILTER type, as this
prevents testing bpf_tail_call in conjunction with other program types.
Instead, use the program type specified in the test case.

Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: test make sure to run unpriv test cases in test_verifier

commit 832c6f2c29ec519b766923937f4f93fb1008b47d upstream

Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix test suite to enable all unpriv program types

commit 36641ad61db5ce9befd5eb0071abb36eaff16cfc upstream

Given BPF_PROG_TYPE_CGROUP_SKB program types are also valid in an
unprivileged setting, lets not omit these tests and potentially
have issues fall through the cracks. Make this more obvious by
adding a small test_as_unpriv() helper.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY

[ Upstream commit d84cf06e3dd8c5c5b547b5d8931015fc536678e5 ]

The userfaultfd hugetlb tests cause a resv_huge_pages underflow.  This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache.  When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.

To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.

There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages.  That is fixed in a more complicated
patch not targeted for -stable.

Test:

  Hacked the code locally such that resv_huge_pages underflows produce a
  warning, then:

  ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
  ./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success

Both tests succeed and produce no warnings.  After the test runs number
of free/resv hugepages is correct.

[mike.kravetz@oracle.com: changelog fixes]

Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com
Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fixup error handling in fixup_inode_link_counts

commit 011b28acf940eb61c000059dd9e2cfcbf52ed96b upstream.

This function has the following pattern

while (1) {
ret = whatever();
if (ret)
goto out;
}
ret = 0
out:
return ret;

However several places in this while loop we simply break; when there's
a problem, thus clearing the return value, and in one case we do a
return -EIO, and leak the memory for the path.

Fix this by re-arranging the loop to deal with ret == 1 coming from
btrfs_search_slot, and then simply delete the

ret = 0;
out:

bit so everybody can break if there is an error, which will allow for
proper error handling to occur.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return errors from btrfs_del_csums in cleanup_ref_head

commit 856bd270dc4db209c779ce1e9555c7641ffbc88e upstream.

We are unconditionally returning 0 in cleanup_ref_head, despite the fact
that btrfs_del_csums could fail.  We need to return the error so the
transaction gets aborted properly, fix this by returning ret from
btrfs_del_csums in cleanup_ref_head.

Reviewed-by: Qu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix error handling in btrfs_del_csums

commit b86652be7c83f70bf406bed18ecf55adb9bfb91b upstream.

Error injection stress would sometimes fail with checksums on disk that
did not have a corresponding extent.  This occurred because the pattern
in btrfs_del_csums was

while (1) {
ret = btrfs_search_slot();
if (ret < 0)
break;
}
ret = 0;
out:
btrfs_free_path(path);
return ret;

If we got an error from btrfs_search_slot we'd clear the error because
we were breaking instead of goto out.  Instead of using goto out, simply
handle the cases where we may leave a random value in ret, and get rid
of the

ret = 0;
out:

pattern and simply allow break to have the proper error reporting.  With
this fix we properly abort the transaction and do not commit thinking we
successfully deleted the csum.

Reviewed-by: Qu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: mark ordered extent and inode with error if we fail to finish

commit d61bec08b904cf171835db98168f82bc338e92e4 upstream.

While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.

It turns out the abort came from finish ordered io while trying to write
out the free space cache.  It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.

Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.

With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

commit 7d65f9e80646c595e8c853640a9d0768a33e204c upstream.

PIC interrupts do not support affinity setting and they can end up on
any online CPU. Therefore, it's required to mark the associated vectors
as system-wide reserved. Otherwise, the corresponding irq descriptors
are copied to the secondary CPUs but the vectors are not marked as
assigned or reserved. This works correctly for the IO/APIC case.

When the IO/APIC is disabled via config, kernel command line or lack of
enumeration then all legacy interrupts are routed through the PIC, but
nothing marks them as system-wide reserved vectors.

As a consequence, a subsequent allocation on a secondary CPU can result in
allocating one of these vectors, which triggers the BUG() in
apic_update_vector() because the interrupt descriptor slot is not empty.

Imran tried to work around that by marking those interrupts as allocated
when a CPU comes online. But that's wrong in case that the IO/APIC is
available and one of the legacy interrupts, e.g. IRQ0, has been switched to
PIC mode because then marking them as allocated will fail as they are
already marked as system vectors.

Stay consistent and update the legacy vectors after attempting IO/APIC
initialization and mark them as system vectors in case that no IO/APIC is
available.

Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect

commit 4ac06a1e013cf5fdd963317ffd3b968560f33bba upstream.

It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014
  Call Trace:
   llcp_sock_getname+0xb1/0xe0
   __sys_getpeername+0x95/0xc0
   ? lockdep_hardirqs_on_prepare+0xd5/0x180
   ? syscall_enter_from_user_mode+0x1c/0x40
   __x64_sys_getpeername+0x11/0x20
   do_syscall_64+0x36/0x70
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This can be reproduced with Syzkaller C repro (bind followed by
getpeername):
https://syzkaller.appspot.com/x/repro.c?x=14def446e00000

Cc: <stable@vger.kernel.org>
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix data corruption by fallocate

commit 6bba4471f0cc1296fe3c2089b9e52442d3074b2e upstream.

When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped.  That will cause file corruption.  Fix this by
zero out eof blocks when extending the inode size.

Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.

    qemu-img convert -p -t none -T none -f qcow2 $qcow_image \
             -O qcow2 -o compat=1.1 $qcow_image.conv

The usage of fallocate in qemu is like this, it first punches holes out
of inode size, then extend the inode size.

    fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0
    fallocate(11, 0, 2276196352, 65536) = 0

v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html
v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pid: take a reference when initializing `cad_pid`

commit 0711f0d7050b9e07c44bc159bbc64ac0a1022c7f upstream.

During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid.  Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid().  As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early.  As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g.  when delivering signals).

This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.

Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.

Full KASAN splat below.

   ==================================================================
   BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
   BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
   Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273

   CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1
   Hardware name: linux,dummy-virt (DT)
   Call trace:
    ns_of_pid include/linux/pid.h:153 [inline]
    task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
    do_notify_parent+0x308/0xe60 kernel/signal.c:1950
    exit_notify kernel/exit.c:682 [inline]
    do_exit+0x2334/0x2bd0 kernel/exit.c:845
    do_group_exit+0x108/0x2c8 kernel/exit.c:922
    get_signal+0x4e4/0x2a88 kernel/signal.c:2781
    do_signal arch/arm64/kernel/signal.c:882 [inline]
    do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936
    work_pending+0xc/0x2dc

   Allocated by task 0:
    slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516
    slab_alloc_node mm/slub.c:2907 [inline]
    slab_alloc mm/slub.c:2915 [inline]
    kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920
    alloc_pid+0xdc/0xc00 kernel/pid.c:180
    copy_process+0x2794/0x5e18 kernel/fork.c:2129
    kernel_clone+0x194/0x13c8 kernel/fork.c:2500
    kernel_thread+0xd4/0x110 kernel/fork.c:2552
    rest_init+0x44/0x4a0 init/main.c:687
    arch_call_rest_init+0x1c/0x28
    start_kernel+0x520/0x554 init/main.c:1064
    0x0

   Freed by task 270:
    slab_free_hook mm/slub.c:1562 [inline]
    slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600
    slab_free mm/slub.c:3161 [inline]
    kmem_cache_free+0x224/0x8e0 mm/slub.c:3177
    put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114
    put_pid+0x30/0x48 kernel/pid.c:109
    proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401
    proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591
    proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617
    call_write_iter include/linux/fs.h:1977 [inline]
    new_sync_write+0x3ac/0x510 fs/read_write.c:518
    vfs_write fs/read_write.c:605 [inline]
    vfs_write+0x9c4/0x1018 fs/read_write.c:585
    ksys_write+0x124/0x240 fs/read_write.c:658
    __do_sys_write fs/read_write.c:670 [inline]
    __se_sys_write fs/read_write.c:667 [inline]
    __arm64_sys_write+0x78/0xb0 fs/read_write.c:667
    __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
    invoke_syscall arch/arm64/kernel/syscall.c:49 [inline]
    el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129
    do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168
    el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416
    el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432
    el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701

   The buggy address belongs to the object at ffff23794dda0000
    which belongs to the cache pid of size 224
   The buggy address is located 4 bytes inside of
    224-byte region [ffff23794dda0000, ffff23794dda00e0)
   The buggy address belongs to the page:
   page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0
   head:(____ptrval____) order:1 compound_mapcount:0
   flags: 0x3fffc0000010200(slab|head)
   raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080
   raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

   Memory state around the buggy address:
    ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
   >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
    ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
    ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
   ==================================================================

Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com
Fixes: 9ec52099e4b8678a ("[PATCH] replace cad_pid by a struct pid")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix build in periphal-only mode

In branches to which 24d209dba5a3 ("usb: dwc2: Fix hibernation between
host and device modes.") has been back-ported, the bus_suspended member
of struct dwc2_hsotg is only present in builds that support host-mode.
To avoid having to pull in several more non-Fix commits in order to
get it to compile, wrap the usage of the member in a macro conditional.

Fixes: 24d209dba5a3 ("usb: dwc2: Fix hibernation between host and device modes.")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed

commit 082cd4ec240b8734a82a89ffb890216ac98fec68 upstream.

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553]  ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975]  ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368]  ext4_find_extent+0x300/0x330 [ext4]
[130747.335759]  ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179]  ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567]  ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995]  ext4_readpage+0x54/0x100 [ext4]
[130747.337359]  generic_file_buffered_read+0x410/0xae8
[130747.337767]  generic_file_read_iter+0x114/0x190
[130747.338152]  ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556]  __vfs_read+0x11c/0x188
[130747.338851]  vfs_read+0x94/0x150
[130747.339110]  ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable).  Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix for mute key LED for HP Pavilion 15-CK0xx

commit 901be145a46eb79879367d853194346a549e623d upstream.

For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.

Signed-off-by: Carlos M <carlos.marr.pz@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix master timer notification

commit 9c1fe96bded935369f8340c2ac2e9e189f697d5d upstream.

snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number.  It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset.  Casually this was spotted by UBSAN check via syzkaller.

Reported-by: syzbot+d102fa5b35335a7e544e@syzkaller.appspotmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000e5560e05c3bd1d63@google.com
Link: https://lore.kernel.org/r/20210602113823.23777-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: require Finger field to mark Win8 reports as MT

commit a2353e3b26012ff43bcdf81d37a3eaddd7ecdbf3 upstream.

This effectively changes collection_is_mt from
  contact ID in report->field
to
  (device is Win8 => collection is finger) && contact ID in report->field

Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly

Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: fix memory leak in cfusbl_device_notify

commit 7f5d86669fa4d485523ddb1d212e0a2d90bd62bb upstream.

In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error.

Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: fix memory leak in caif_device_notify

commit b53558a950a89824938e9811eddfc8efcd94e1bb upstream.

In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error

Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: add proper error handling

commit a2805dca5107d5603f4bbc027e81e20d93476e96 upstream.

caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.

Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: added cfserl_release function

commit bce130e7f392ddde8cfcb09927808ebd5f9c8669 upstream.

Added cfserl_release() function.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: use correct lock to prevent UAF of hdev object

commit e305509e678b3a4af2b3cfd410f409f7cdaabb52 upstream.

The hci_sock_dev_event() function will cleanup the hdev object for
sockets even if this object may still be in used within the
hci_sock_bound_ioctl() function, result in UAF vulnerability.

This patch replace the BH context lock to serialize these affairs
and prevent the race condition.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: fix the erroneous flush_work() order

commit 6a137caec23aeb9e036cdfd8a46dd8a366460e5d upstream.

In the cleanup routine for failed initialization of HCI device,
the flush_work(&hdev->rx_work) need to be finished before the
flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can
possibly invoke new cmd_work and cause a bug, like double free,
in late processings.

This was assigned CVE-2021-3564.

This patch reorder the flush_work() to fix this bug.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hao Xiong <mart1n@zju.edu.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix unique bearer names sanity check

[ Upstream commit f20a46c3044c3f75232b3d0e2d09af9b25efaf45 ]

When enabling a bearer by name, we don't sanity check its name with
higher slot in bearer list. This may have the effect that the name
of an already enabled bearer bypasses the check.

To fix the above issue, we just perform an extra checking with all
existing bearers.

Fixes: cb30a63384bc9 ("tipc: refactor function tipc_enable_bearer()")
Cc: stable@vger.kernel.org
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: add extack messages for bearer/media failure

[ Upstream commit b83e214b2e04204f1fc674574362061492c37245 ]

Add extack error messages for -EINVAL errors when enabling bearer,
getting/setting properties for a media/bearer

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbevf: add correct exception tracing for XDP

[ Upstream commit faae81420d162551b6ef2d804aafc00f4cd68e0e ]

Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.

Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: fix error return code in ieee802154_llsec_getparams()

[ Upstream commit 373e864cf52403b0974c2f23ca8faf9104234555 ]

Fix to return negative error code -ENOBUFS from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3e9c156e2c21 ("ieee802154: add netlink interfaces for llsec")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210519141614.3040055-1-weiyongjun1@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: fix error return code in ieee802154_add_iface()

[ Upstream commit 79c6b8ed30e54b401c873dbad2511f2a1c525fd5 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: be51da0f3e34 ("ieee802154: Stop using NLA_PUT*().")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508062517.2574-1-thunder.leizhen@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches

[ Upstream commit 8971ee8b087750a23f3cd4dc55bff2d0303fd267 ]

The private helper data size cannot be updated. However, updates that
contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is
the same.

Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: fix format string mismatch

[ Upstream commit dc5f9f55502e13ba05731d5046a14620aa2ff456 ]

clang doesn't like printing a 32-bit integer using %hX format string:

drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
                 client->name, hid->vendor, hid->product);
                               ^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
                 client->name, hid->vendor, hid->product);
                                            ^~~~~~~~~~~~

Use an explicit cast to truncate it to the low 16 bits instead.

Fixes: 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: fix error return code in hid_pidff_init()

[ Upstream commit 3dd653c077efda8152f4dd395359617d577a54cd ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 224ee88fe395 ("Input: add force feedback driver for PID devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

[ Upstream commit 56e4ee82e850026d71223262c07df7d6af3bd872 ]

syzbot reported memory leak [1] when adding service with
HASHED flag. We should ignore this flag both from sockopt
and netlink provided data, otherwise the service is not
hashed and not visible while releasing resources.

[1]
BUG: memory leak
unreferenced object 0xffff888115227800 (size 512):
  comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343
    [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570
    [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101
    [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435
    [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857
    [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117
    [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125
    [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
    [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/platform: fix module_put call in error flow

[ Upstream commit dc51ff91cf2d1e9a2d941da483602f71d4a51472 ]

The ->parent_module is the one that use in try_module_get. It should
also be the one the we use in module_put during vfio_platform_open().

Fixes: 32a2d71c4e80 ("vfio: platform: introduce vfio-platform-base module")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210518192133.59195-1-mgurtovoy@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: vfio-mdev: fix error handing in mdpy_fb_probe()

[ Upstream commit 752774ce7793a1f8baa55aae31f3b4caac49cbe4 ]

Fix to return a negative error code from the framebuffer_alloc() error
handling case instead of 0, also release regions in some error handing
cases.

Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210520133641.1421378-1-weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: zap_vma_ptes() needs MMU

[ Upstream commit 2a55ca37350171d9b43d561528f23d4130097255 ]

zap_vma_ptes() is only available when CONFIG_MMU is set/enabled.
Without CONFIG_MMU, vfio_pci.o has build errors, so make
VFIO_PCI depend on MMU.

riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `vfio_pci_mmap_open':
vfio_pci.c:(.text+0x1ec): undefined reference to `zap_vma_ptes'
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `.L0 ':
vfio_pci.c:(.text+0x165c): undefined reference to `zap_vma_ptes'

Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210515190856.2130-1-rdunlap@infradead.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: Fix error return code in vfio_ecap_init()

[ Upstream commit d1ce2c79156d3baf0830990ab06d296477b93c26 ]

The error code returned from vfio_ext_cap_len() is stored in 'len', not
in 'ret'.

Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210515020458.6771-1-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: cper: fix snprintf() use in cper_dimm_err_location()

[ Upstream commit 942859d969de7f6f7f2659a79237a758b42782da ]

snprintf() should be given the full buffer size, not one less. And it
guarantees nul-termination, so doing it manually afterwards is
pointless.

It's even potentially harmful (though probably not in practice because
CPER_REC_LEN is 256), due to the "return how much would have been
written had the buffer been big enough" semantics. I.e., if the bank
and/or device strings are long enough that the "DIMM location ..."
output gets truncated, writing to msg[n] is a buffer overflow.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 3760cd20402d4 ("CPER: Adjust code flow of some functions")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: Allow EFI_MEMORY_XP and EFI_MEMORY_RO both to be cleared

[ Upstream commit 45add3cc99feaaf57d4b6f01d52d532c16a1caee ]

UEFI spec 2.9, p.108, table 4-1 lists the scenario that both attributes
are cleared with the description "No memory access protection is
possible for Entry". So we can have valid entries where both attributes
are cleared, so remove the check.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory Attributes table")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: validate key indexes for cfg80211_registered_device

commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream

syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().

Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().

Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com
Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb: update old-style static const declaration

[ Upstream commit ff40e0d41af19e36b43693fcb9241b4a6795bb44 ]

GCC reports the following warning with W=1

sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’:
sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning
of declaration [-Wold-style-declaration]
 1694 |  const static usb_mixer_elem_resume_func_t resume_funcs[] = {
      |  ^~~~~

Move static to the beginning of declaration

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: cdc_ncm: don't spew notifications

[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ]

RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.

This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083

...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...

This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.

This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.

When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...

Chrome OS cannot support RTL8156 until this is fixed.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.193

Link: https://lore.kernel.org/r/20210531130640.131924542@linuxfoundation.org
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>