I2CSLAVEADR=\$1802! I2C_SLAVE address
I2CSLAVEADR1=\$1804!
LPM_MODE=\$1806! LPM_MODE value, LPM0+GIE is the default value
-RSTIV_MEM=\$1808! SYSRSTIV memory, set to -1 to do Deep RESET
-RST_DP=\$180A! RST value for DP
-RST_VOC=\$180C! RST value for VOClink
-VERSION=\$180E!
-THREADS=\$1810! THREADS
-KERNEL_ADDON=\$1812!
-
-WIPE_INI_=\$1814! MOV #WIPE_INI,X
-WIPE_COLD=\$1814! WIPE value for PFA_COLD
-WIPE_INI_FORTH=\$1816! WIPE value for PFA_INI_FORTH
-WIPE_SLEEP=\$1818! WIPE value for PFA_SLEEP
-WIPE_WARM=\$181A! WIPE value for PFA_WARM
-WIPE_TERM_INT=\$181C! WIPE value for TERMINAL vector
-WIPE_DP=\$182E! WIPE value for RST_DP
-WIPE_VOC=\$1820! WIPE value for RST_VOC
-
-INI_FORTH_INI=\$1822! MOV #INI_FORTH_INI,X \ >BODY instruction of INI_FORTH subroutine
-INIT_ACCEPT=\$1822! WIPE value for PFAACCEPT
-INIT_CR=\$1824! WIPE value for PFACR
-INIT_EMIT=\$1826! FORTH value for PFAEMIT
-INIT_KEY=\$1828! WIPE value for PFAKEY
-INIT_CIB=\$182A! WIPE value for CIB_ADR
-HALF_FORTH_INI=\$182C! to preserve the state of DEFERed words, used by user INI_SOFT_APP as:
-! ADD #4,0(RSP) \ skip INI_FORTH >BODY instruction "MOV #INI_FORTH_INI,X"
-! MOV #HALF_FORTH_INI,X \ replace it by "MOV #HALF_FORTH_INI,X"
-! MOV @RSP+,PC \ then RET
-INIT_DOCOL=\$182C! FORTH value for rDOCOL (R4)
-INIT_DODOES=\$182E! FORTH value for rDODOES (R5)
-INIT_DOCON=\$1830! FORTH value for rDOCON (R6)
-INIT_DOVAR=\$1832! FORTH value for rDOVAR (R7)
-INIT_CAPS=\$1834! FORTH value for CAPS
-INIT_BASE=\$1836! FORTH value for BASE
-! free EPROM
-
+USERSTIV=\$1808! user SYS variable, defines software RESET, DEEP_RST, INIT_HARWARE, etc.
+VERSION=\$180A!
+THREADS=\$180C! THREADS
+KERNEL_ADDON=\$180E! BIT15=FLOORED DIVISION
+! BIT14=LF_XTAL
+! BIT13=UART CTS
+! BIT12=UART RTS
+! BIT11=UART XON/XOFF
+! BIT10=UART half duplex
+! BIT9=I2C_TERMINAL
+! BIT8=Q15.16 input
+! BIT7=DOUBLE input
+! BIT6=assembler 20 bits
+! BIT5=assembler 16 bits
+! BIT4=assembler 16 bits with 20 bits addr
+! BIT3=vocabulary set
+! BIT2=
+! BIT1=
+! BIT0=
+!
+DEEP_ORG=\$1810! MOV #DEEP_ORG,X
+DEEP_TERM_VEC=\$1810! to DEEP_INIT TERMINAL vector
+DEEP_COLD=\$1812! to DEEP_INIT COLD_APP
+DEEP_SOFT=\$1814! to DEEP_INIT SOFT_APP
+DEEP_HARD=\$1816! to DEEP_INIT HARD_APP
+DEEP_SLEEP=\$1818! to DEEP_INIT SLEEP_APP
+DEEP_DP=\$181A! to DEEP_INIT RST_DP
+DEEP_LASTVOC=\$181C! to DEEP_INIT RST_LASTVOC
+DEEP_CURRENT=\$181E! to DEEP_INIT RST_CURRENT
+DEEP_CONTEXT=\$1820! to DEEP_INIT RST_CONTEXT
+!
+PUC_ABORT_ORG=\$1822! MOV #PUC_ABORT_ORG,X
+INIT_ACCEPT=\$1822! to INIT PFA_ACCEPT
+INIT_EMIT=\$1824! to INIT PFA_EMIT
+INIT_KEY=\$1826! to INIT PFA_KEY
+INIT_CIB=\$1828! to INIT CIB_ORG
+FORTH_ORG=\$182A! MOV #FORTH_ORG,X \to preserve the state of DEFERed words
+INIT_RSP=\$182A! to INIT RSP
+INIT_DOCOL=\$182C! to INIT rDOCOL (R4) to restore rDOCOL: MOV &INIT_DOCOL,rDOCOL
+INIT_DODOES=\$182E! to INIT rDODOES (R5)
+INIT_DOCON=\$1830! to INIT rDOCON (R6)
+INIT_DOVAR=\$1832! to INIT rDOVAR (R7)
+INIT_CAPS=\$1834! to INIT CAPS
+INIT_BASE=\$1836! to INIT BASE
+INIT_LEAVE=\$1838! to INIT LEAVEPTR
+!
+RST_ORG=\$183A!
+RST_LEN=\$10!
+COLD_APP=\$183A! COLD_APP
+SOFT_APP=\$183C! SOFT_APP
+HARD_APP=\$183E! HARD_APP
+SLEEP_APP=\$1840! SLEEP_APP
+RST_DP=\$1842! RST_RET value for (RAM) DDP
+RST_LASTVOC=\$1844! RST_RET value for (RAM) LASTVOC
+RST_CURRENT=\$1846! RST_RET value for (RAM) CURRENT
+RST_CONTEXT=\$1848! RST_RET value for (RAM) CONTEXT (8 CELLS)
+!
+! $185A = free EPROM
+!
! ============================================
! FRAM TLV
! ============================================
PSTACK_SIZE=\#48! words
RSTACK_SIZE=\#48! words
PAD_LEN=\#84! bytes
-TIB_LEN=\#84! bytes
+CIB_LEN=\#84! bytes
HOLD_SIZE=\#34! bytes
! ----------------------------------------------
! FastForth RAM memory map (>= 1k):
! ----------------------------------------------
-LEAVEPTR=\$1C00! \ Leave-stack pointer, init by QUIT
-LSATCK=\$1C00! \ leave stack, grow up
-PSTACK=\$1C80! \ parameter stack, grow down
-RSTACK=\$1CE0! \ Return stack, grow down
-
-PAD_I2CADR=\$1CE0! \ RX I2C address
-PAD_I2CCNT=\$1CE2! \ count max
-PAD_ORG=\$1CE4! \ user scratch pad buffer, 84 bytes, grow up
-
-TIB_I2CADR=\$1D38! \ TX I2C address
-TIB_I2CCNT=\$1D3A! \ count of bytes
-TIB_ORG=\$1D3C! \ Terminal input buffer, 84 bytes, grow up
-
-HOLDS_ORG=\$1D90! \ base address for HOLDS
-HOLD_BASE=\$1DB2! \ BASE HOLD area, grow down
-
-! ----------------------
-! NOT SAVED VARIABLES
-! ----------------------
-
+LEAVEPTR=\$1C00! Leave-stack pointer, init by QUIT
+LSATCK=\$1C00! leave stack, grow up
+PSTACK=\$1C80! parameter stack, grow down
+RSTACK=\$1CE0! Return stack, grow down
+!
+PAD_I2CADR=\$1CE0! RX I2C address
+PAD_I2CCNT=\$1CE2! count max
+PAD_ORG=\$1CE4! user scratch pad buffer, 84 bytes, grow up
+!
+TIB_I2CADR=\$1D38! TX I2C address
+TIB_I2CCNT=\$1D3A! count of bytes
+TIB_ORG=\$1D3C! Terminal input buffer, 84 bytes, grow up
+!
+HOLDS_ORG=\$1D90! base address for HOLDS
+HOLD_BASE=\$1DB2! BASE HOLD area, grow down
+!
HP=\$1DB2! HOLD ptr
-CAPS=\$1DB4! CAPS ON/OFF flag, must be set to -1 before first reset !
-LAST_NFA=\$1DB6!
-LAST_THREAD=\$1DB8!
-LAST_CFA=\$1DBA!
-LAST_PSP=\$1DBC!
-
-STATEADR=\$1DBE! Interpreter state
-
-SOURCE_LEN=\$1DC0! len of input stream
-SOURCE_ORG=\$1DC2! adr of input stream
-TOIN=\$1DC4! >IN
-DP=\$1DC6! dictionary ptr
-
-LASTVOC=\$1DC8! keep VOC-LINK
-CONTEXT=\$1DCA! CONTEXT dictionnary space (8 CELLS)
-CURRENT=\$1DDA! CURRENT dictionnary ptr
-
-BASEADR=\$1DDC! numeric base, must be defined before first reset !
-LINE=\$1DDE! line in interpretation, activated with NOECHO, desactivated with ECHO
+LAST_NFA=\$1DB4!
+LAST_THREAD=\$1DB6!
+LAST_CFA=\$1DB8!
+LAST_PSP=\$1DBA!
+!
+STATEADR=\$1DBC! Interpreter state
+BASEADR=\$1DBE! base
+CAPS=\$1DC0! CAPS ON/OFF
+!
+SOURCE_LEN=\$1DC2! len of input stream
+SOURCE_ORG=\$1DC4! adr of input stream
+TOIN=\$1DC6! >IN
+DP=\$1DC8! dictionary ptr
+!
+LASTVOC=\$1DCA! keep VOC-LINK
+CURRENT=\$1DCC! CURRENT dictionnary ptr
+CONTEXT=\$1DCE! CONTEXT dictionnary space (8 CELLS)
+!
! ---------------------------------------
!1DE0! 28 RAM bytes free
! ---------------------------------------
SLEEP=\$4400! CODE_WITHOUT_RETURN, CPU shutdown
LIT=\$440A! CODE compiled by LITERAL
-XSQUOTE=\$4414! CODE compiled by S" and S_
-HEREXEC=\$4428! CODE HERE and BEGIN execute address
-QFBRAN=\$4434! CODE compiled by IF UNTIL
-BRAN=\$443A! CODE compiled by ELSE REPEAT AGAIN
-NEXT_ADR=\$443C! CODE NEXT instruction (MOV @IP+,PC)
-XDO=\$443E! CODE compiled by DO
-XPLOOP=\$444E! CODE compiled by +LOOP
-XLOOP=\$4460! CODE compiled by LOOP
-MUSMOD=\$4466! ASM CODE 32/16 unsigned division, used by ?NUMBER, UM/MOD
-MDIV1DIV2=\$4478! ASM CODE input for 48/16 unsigned division with DVDhi=0, see DOUBLE M*/
-MDIV1=\$4480! ASM CODE input for 48/16 unsigned division, see DOUBLE M*/
-RET_ADR=\$44AA! ASM CODE of INI_FORTH_PFA and MARKER+8 definitions,
-SETIB=\$44AC! CODE Set Input Buffer with org & len values, reset >IN pointer
-REFILL=\$44BC! CODE accept one line from input and leave org len of input buffer
-CIB_ADR=\$44CA! [CIB_ADR] = TIB_ORG by default; may be redirected to SDIB_ORG
-XDODOES=\$44D4! to restore rDODOES: MOV #XDODOES,rDODOES
-XDOCON=\$44E2! to restore rDOCON: MOV #XDOCON,rDOCON
-XDOVAR=\$44EE! to restore rDOVAR: MOV #XDOVAR,rDOVAR
+XSQUOTE=\$441E! CODE compiled by S" and S_
+HEREXEC=\$4432! CODE HERE and BEGIN execute address
+MUSMOD=\$443E! asm CODE 32/16 unsigned division, used by ?NUMBER, UM/MOD
+MDIV1DIV2=\$4450! asm CODE input for 48/16 unsigned division with DVDhi=0, see DOUBLE M*/
+MDIV1=\$4458! asm CODE input for 48/16 unsigned division, see DOUBLE M*/
+RET_ADR=\$4482! asm CODE of INIT_SOFT_PFA and MARKER+8 definitions,
+SETIB=\$4484! CODE Set Input Buffer with org & len values, reset >IN pointer
+REFILL=\$4494! CODE accept one line from input and leave org len of input buffer
+CIB_ORG=\$44A0! [CIB_ORG] = TIB_ORG by default; may be redirected to SDIB_ORG
+QFBRAN=\$44AC! CODE compiled by IF UNTIL
+BRAN=\$44B2! CODE compiled by ELSE REPEAT AGAIN
+NEXT_ADR=\$44B4! CODE NEXT instruction (MOV @IP+,PC)
+XDODOES=\$44B6! to restore rDODOES: MOV #XDODOES,rDODOES
+XDOCON=\$44C4! to restore rDOCON: MOV #XDOCON,rDOCON
+! to restore rDOVAR: MOV &INIT_DOVAR,rDOVAR
! to restore rDOCOL: MOV &INIT_DOCOL,rDOCOL
-INI_FORTH=\$44F8! asm CODE common part of RST and QABORT, starts FORTH engine
-QABORT=\$452A! CODE_WITHOUT_RETURN run-time part of ABORT"
-ABORT_TERM=\$4536! CODE_WITHOUT_RETURN, called by QREVEAL and INTERPRET
+INIT_FORTH=\$44D0! asm CODE common part of RST and QABORT, starts FORTH engine
+QABORT=\$4508! CODE_WITHOUT_RETURN run-time part of ABORT"
+ABORT_TERM=\$4512! CODE_WITHOUT_RETURN, called by QREVEAL and INTERPRET
!-------------------------------------------------------------------------------
-UART_COLD_TERM=\$4594! ASM CODE, content of COLD+2 by default
-UART_INIT_TERM=\$459C! ASM CODE, content of WARM+2 by default
-UART_RXON=\$45C6! ASM CODE, content of SLEEP+2 by default
-UART_RXOFF=\$45C8! ASM CODE, called by ACCEPT before RX char LF.
+! UART FASTFORTH
!-------------------------------------------------------------------------------
-I2C_COLD_TERM=\$45B8! ASM CODE, content of COLD_PFA by default
-I2C_INIT_TERM=\$458E! ASM CODE, content of WARM_PFA by default
-I2C_RXON=\$45BA! ASM CODE, content of SLEEP_PFA by default
-I2C_CTRL_CH=\$45BC! ASM CODE, used as is: MOV.B #CTRL_CHAR,Y
+UART_INIT_TERM=\$4554! asm CODE, content of WARM+2 by default (WARM starts with: CALL #UART_INIT_TERM)
+UART_COLD_TERM=\$457E! asm CODE, content of COLD+2 by default (COLD starts with: CALL #UART_COLD_TERM)
+UART_INIT_SOFT=\$4584! asm CODE, content of INIT_FORTH+2 (by default, INIT_FORTH starts with: CALL #RET_ADR)
+UART_RXON=\$4586! asm CODE, content of SLEEP+2 (by default, SLEEP starts with: CALL #UART_RXON)
+UART_RXON=KEY\+\$8! asm CODE, content of SLEEP+2 (by default, SLEEP starts with: CALL #UART_RXON)
+UART_RXOFF=ACCEPT\+\$2A! asm CODE, called by ACCEPT after 'CR' and before 'LF'.
+!-------------------------------------------------------------------------------
+! I2C FASTFORTH
+!-------------------------------------------------------------------------------
+I2C_ACCEPT=\$4544! asm CODE, content of SLEEP+2 by default
+I2C_CTRL_CH=\$4546! asm CODE, used as is: MOV.B #CTRL_CHAR,Y
! CALL #I2C_CTRL_CH
+I2C_COLD_TERM=\$4556! asm CODE, content of COLD+2, RET address by default
+I2C_INIT_SOFT=\$4556! asm CODE, content of INIT_FORTH+2, RET address by default
+I2C_INIT_TERM=\$4558! asm CODE, content of WARM+2 by default
+I2C_WARM=\$4580! WARM address
!-------------------------------------------------------------------------------
-
+NOPUC=SYS\+\$0A! NOPUC with FORTH: ' SYS 10 +
+COLD=SYS\+\$16! COLD address ' SYS 22 +
+ABORT=ALLOT\+\$8! CODE_WITHOUT_RETURN ' ALLOT 8 +
+QUIT=ALLOT\+\$0E! CODE_WITHOUT_RETURN ' ALLOT 14 +
! ----------------------------------------------
! Interrupt Vectors and signatures - MSP430FR6989
! ----------------------------------------------
MAIN_LEN=\$1FC00! 127 k FRAM
-FRAM_FULL=\$FF30! 80 bytes are sufficient considering what can be compiled in one line and WORD use.
+FRAM_FULL=\$FF40! 64 bytes are sufficient considering what can be compiled in one line and WORD use.
SIGNATURES=\$FF80! JTAG/BSL signatures
JTAG_SIG1=\$FF80! if 0 (electronic fuse=0) enable JTAG/SBW; must be reset by wipe.
JTAG_SIG2=\$FF82! if JTAG_SIG1=\$AAAA, length of password string @ JTAG_PASSWORD
OSDN Git Service
