OpenSSL CHANGES
_______________
+ Changes between 1.0.1b and 1.0.1c [10 May 2012]
+
+ *) Sanity check record length before skipping explicit IV in TLS
+ 1.2, 1.1 and DTLS to fix DoS attack.
+
+ Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
+ fuzzing as a service testing platform.
+ (CVE-2012-2333)
+ [Steve Henson]
+
+ *) Initialise tkeylen properly when encrypting CMS messages.
+ Thanks to Solar Designer of Openwall for reporting this issue.
+ [Steve Henson]
+
+ *) In FIPS mode don't try to use composite ciphers as they are not
+ approved.
+ [Steve Henson]
+
+ Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
+
+ *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
+ 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
+ mean any application compiled against OpenSSL 1.0.0 headers setting
+ SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
+ TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
+ 0x10000000L Any application which was previously compiled against
+ OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
+ will need to be recompiled as a result. Letting be results in
+ inability to disable specifically TLS 1.1 and in client context,
+ in unlike event, limit maximum offered version to TLS 1.0 [see below].
+ [Steve Henson]
+
+ *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
+ disable just protocol X, but all protocols above X *if* there are
+ protocols *below* X still enabled. In more practical terms it means
+ that if application wants to disable TLS1.0 in favor of TLS1.1 and
+ above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
+ SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
+ client side.
+ [Andy Polyakov]
+
+ Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
+
+ *) Check for potentially exploitable overflows in asn1_d2i_read_bio
+ BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
+ in CRYPTO_realloc_clean.
+
+ Thanks to Tavis Ormandy, Google Security Team, for discovering this
+ issue and to Adam Langley <agl@chromium.org> for fixing it.
+ (CVE-2012-2110)
+ [Adam Langley (Google), Tavis Ormandy, Google Security Team]
+
+ *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
+ [Adam Langley]
+
+ *) Workarounds for some broken servers that "hang" if a client hello
+ record length exceeds 255 bytes.
+
+ 1. Do not use record version number > TLS 1.0 in initial client
+ hello: some (but not all) hanging servers will now work.
+ 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
+ the number of ciphers sent in the client hello. This should be
+ set to an even number, such as 50, for example by passing:
+ -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
+ Most broken servers should now work.
+ 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
+ TLS 1.2 client support entirely.
+ [Steve Henson]
+
+ *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
+ [Andy Polyakov]
+
+ Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
+
+ *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
+ STRING form instead of a DigestInfo.
+ [Steve Henson]
+
+ *) The format used for MDC2 RSA signatures is inconsistent between EVP
+ and the RSA_sign/RSA_verify functions. This was made more apparent when
+ OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
+ those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
+ the correct format in RSA_verify so both forms transparently work.
+ [Steve Henson]
+
+ *) Some servers which support TLS 1.0 can choke if we initially indicate
+ support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
+ encrypted premaster secret. As a workaround use the maximum pemitted
+ client version in client hello, this should keep such servers happy
+ and still work with previous versions of OpenSSL.
+ [Steve Henson]
+
+ *) Add support for TLS/DTLS heartbeats.
+ [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+ *) Add support for SCTP.
+ [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+ *) Improved PRNG seeding for VOS.
+ [Paul Green <Paul.Green@stratus.com>]
+
+ *) Extensive assembler packs updates, most notably:
+
+ - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
+ - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
+ - x86_64: bit-sliced AES implementation;
+ - ARM: NEON support, contemporary platforms optimizations;
+ - s390x: z196 support;
+ - *: GHASH and GF(2^m) multiplication implementations;
+
+ [Andy Polyakov]
+
+ *) Make TLS-SRP code conformant with RFC 5054 API cleanup
+ (removal of unnecessary code)
+ [Peter Sylvester <peter.sylvester@edelweb.fr>]
+
+ *) Add TLS key material exporter from RFC 5705.
+ [Eric Rescorla]
+
+ *) Add DTLS-SRTP negotiation from RFC 5764.
+ [Eric Rescorla]
+
+ *) Add Next Protocol Negotiation,
+ http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
+ disabled with a no-npn flag to config or Configure. Code donated
+ by Google.
+ [Adam Langley <agl@google.com> and Ben Laurie]
+
+ *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
+ NIST-P256, NIST-P521, with constant-time single point multiplication on
+ typical inputs. Compiler support for the nonstandard type __uint128_t is
+ required to use this (present in gcc 4.4 and later, for 64-bit builds).
+ Code made available under Apache License version 2.0.
+
+ Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+ line to include this in your build of OpenSSL, and run "make depend" (or
+ "make update"). This enables the following EC_METHODs:
+
+ EC_GFp_nistp224_method()
+ EC_GFp_nistp256_method()
+ EC_GFp_nistp521_method()
+
+ EC_GROUP_new_by_curve_name() will automatically use these (while
+ EC_GROUP_new_curve_GFp() currently prefers the more flexible
+ implementations).
+ [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
+
+ *) Use type ossl_ssize_t instad of ssize_t which isn't available on
+ all platforms. Move ssize_t definition from e_os.h to the public
+ header file e_os2.h as it now appears in public header file cms.h
+ [Steve Henson]
+
+ *) New -sigopt option to the ca, req and x509 utilities. Additional
+ signature parameters can be passed using this option and in
+ particular PSS.
+ [Steve Henson]
+
+ *) Add RSA PSS signing function. This will generate and set the
+ appropriate AlgorithmIdentifiers for PSS based on those in the
+ corresponding EVP_MD_CTX structure. No application support yet.
+ [Steve Henson]
+
+ *) Support for companion algorithm specific ASN1 signing routines.
+ New function ASN1_item_sign_ctx() signs a pre-initialised
+ EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
+ the appropriate parameters.
+ [Steve Henson]
+
+ *) Add new algorithm specific ASN1 verification initialisation function
+ to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
+ handling will be the same no matter what EVP_PKEY_METHOD is used.
+ Add a PSS handler to support verification of PSS signatures: checked
+ against a number of sample certificates.
+ [Steve Henson]
+
+ *) Add signature printing for PSS. Add PSS OIDs.
+ [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
+
+ *) Add algorithm specific signature printing. An individual ASN1 method
+ can now print out signatures instead of the standard hex dump.
+
+ More complex signatures (e.g. PSS) can print out more meaningful
+ information. Include DSA version that prints out the signature
+ parameters r, s.
+ [Steve Henson]
+
+ *) Password based recipient info support for CMS library: implementing
+ RFC3211.
+ [Steve Henson]
+
+ *) Split password based encryption into PBES2 and PBKDF2 functions. This
+ neatly separates the code into cipher and PBE sections and is required
+ for some algorithms that split PBES2 into separate pieces (such as
+ password based CMS).
+ [Steve Henson]
+
+ *) Session-handling fixes:
+ - Fix handling of connections that are resuming with a session ID,
+ but also support Session Tickets.
+ - Fix a bug that suppressed issuing of a new ticket if the client
+ presented a ticket with an expired session.
+ - Try to set the ticket lifetime hint to something reasonable.
+ - Make tickets shorter by excluding irrelevant information.
+ - On the client side, don't ignore renewed tickets.
+ [Adam Langley, Bodo Moeller (Google)]
+
+ *) Fix PSK session representation.
+ [Bodo Moeller]
+
+ *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+ This work was sponsored by Intel.
+ [Andy Polyakov]
+
+ *) Add GCM support to TLS library. Some custom code is needed to split
+ the IV between the fixed (from PRF) and explicit (from TLS record)
+ portions. This adds all GCM ciphersuites supported by RFC5288 and
+ RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
+ add a special AESGCM string for GCM only.
+ [Steve Henson]
+
+ *) Expand range of ctrls for AES GCM. Permit setting invocation
+ field on decrypt and retrieval of invocation field only on encrypt.
+ [Steve Henson]
+
+ *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+ As required by RFC5289 these ciphersuites cannot be used if for
+ versions of TLS earlier than 1.2.
+ [Steve Henson]
+
+ *) For FIPS capable OpenSSL interpret a NULL default public key method
+ as unset and return the appopriate default but do *not* set the default.
+ This means we can return the appopriate method in applications that
+ swicth between FIPS and non-FIPS modes.
+ [Steve Henson]
+
+ *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+ ENGINE is used then we cannot handle that in the FIPS module so we
+ keep original code iff non-FIPS operations are allowed.
+ [Steve Henson]
+
+ *) Add -attime option to openssl utilities.
+ [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
+
+ *) Redirect DSA and DH operations to FIPS module in FIPS mode.
+ [Steve Henson]
+
+ *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+ FIPS EC methods unconditionally for now.
+ [Steve Henson]
+
+ *) New build option no-ec2m to disable characteristic 2 code.
+ [Steve Henson]
+
+ *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+ all cases can be covered as some introduce binary incompatibilities.
+ [Steve Henson]
+
+ *) Redirect RSA operations to FIPS module including keygen,
+ encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+ [Steve Henson]
+
+ *) Add similar low level API blocking to ciphers.
+ [Steve Henson]
+
+ *) Low level digest APIs are not approved in FIPS mode: any attempt
+ to use these will cause a fatal error. Applications that *really* want
+ to use them can use the private_* version instead.
+ [Steve Henson]
+
+ *) Redirect cipher operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Redirect digest operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Update build system to add "fips" flag which will link in fipscanister.o
+ for static and shared library builds embedding a signature if needed.
+ [Steve Henson]
+
+ *) Output TLS supported curves in preference order instead of numerical
+ order. This is currently hardcoded for the highest order curves first.
+ This should be configurable so applications can judge speed vs strength.
+ [Steve Henson]
+
+ *) Add TLS v1.2 server support for client authentication.
+ [Steve Henson]
+
+ *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
+ and enable MD5.
+ [Steve Henson]
+
+ *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
+ FIPS modules versions.
+ [Steve Henson]
+
+ *) Add TLS v1.2 client side support for client authentication. Keep cache
+ of handshake records longer as we don't know the hash algorithm to use
+ until after the certificate request message is received.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 client support. Add a default signature algorithms
+ extension including all the algorithms we support. Parse new signature
+ format in client key exchange. Relax some ECC signing restrictions for
+ TLS v1.2 as indicated in RFC5246.
+ [Steve Henson]
+
+ *) Add server support for TLS v1.2 signature algorithms extension. Switch
+ to new signature format when needed using client digest preference.
+ All server ciphersuites should now work correctly in TLS v1.2. No client
+ support yet and no support for client certificates.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
+ to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
+ ciphersuites. At present only RSA key exchange ciphersuites work with
+ TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
+ SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
+ and version checking.
+ [Steve Henson]
+
+ *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
+ with this defined it will not be affected by any changes to ssl internal
+ structures. Add several utility functions to allow openssl application
+ to work with OPENSSL_NO_SSL_INTERN defined.
+ [Steve Henson]
+
+ *) Add SRP support.
+ [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
+
+ *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
+ [Steve Henson]
+
+ *) Permit abbreviated handshakes when renegotiating using the function
+ SSL_renegotiate_abbreviated().
+ [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+ *) Add call to ENGINE_register_all_complete() to
+ ENGINE_load_builtin_engines(), so some implementations get used
+ automatically instead of needing explicit application support.
+ [Steve Henson]
+
+ *) Add support for TLS key exporter as described in RFC5705.
+ [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
+
+ *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
+ a few changes are required:
+
+ Add SSL_OP_NO_TLSv1_1 flag.
+ Add TLSv1_1 methods.
+ Update version checking logic to handle version 1.1.
+ Add explicit IV handling (ported from DTLS code).
+ Add command line options to s_client/s_server.
+ [Steve Henson]
+
+ Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
+
+ *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
+ in CMS and PKCS7 code. When RSA decryption fails use a random key for
+ content decryption and always return the same error. Note: this attack
+ needs on average 2^20 messages so it only affects automated senders. The
+ old behaviour can be reenabled in the CMS code by setting the
+ CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
+ an MMA defence is not necessary.
+ Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
+ this issue. (CVE-2012-0884)
+ [Steve Henson]
+
+ *) Fix CVE-2011-4619: make sure we really are receiving a
+ client hello before rejecting multiple SGC restarts. Thanks to
+ Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
+ [Steve Henson]
+
Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
*) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
OSDN Git Service
