hardware/ti/omap3/dspbridge/inc/errbase.h

   1 /*
   2  *  Copyright 2001-2008 Texas Instruments - http://www.ti.com/
   3  *
   4  *  Licensed under the Apache License, Version 2.0 (the "License");
   5  *  you may not use this file except in compliance with the License.
   6  *  You may obtain a copy of the License at
   7  *
   8  *     http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  *  Unless required by applicable law or agreed to in writing, software
  11  *  distributed under the License is distributed on an "AS IS" BASIS,
  12  *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  *  See the License for the specific language governing permissions and
  14  *  limitations under the License.
  15  */
  16
  17 /*
  18  *  ======== errbase.h ========
  19  *  DSP-BIOS Bridge driver support functions for TI OMAP processors.
  20  *  Description:
  21  *      Central repository for DSP/BIOS Bridge error and status code.
  22  *
  23  *  Error codes are of the form:
  24  *      [<MODULE>]_E<ERRORCODE>
  25  *
  26  *  Success codes are of the form:
  27  *      [<MODULE>]_S<SUCCESSCODE>
  28  *
  29  *! Revision History:
  30  *! ================
  31  *! 24-Jan-2003 map Added DSP_SALREADYLOADED for persistent library checking
  32  *! 23-Nov-2002 gp: Minor comment cleanup.
  33  *! 13-May-2002 sg  Added DSP_SALREADYASLEEP and DSP_SALREADYWAKE.
  34  *! 18-Feb-2002 mk: Added DSP_EOVERLAYMEMORY, EFWRITE, ENOSECT.
  35  *! 31-Jan-2002 mk: Added definitions of DSP_STRUE and DSP_SFALSE.
  36  *! 29-Jan-2002 mk: Added definition of CFG_E_INSUFFICIENTBUFSIZE.
  37  *! 24-Oct-2001 sp: Consolidated all the error codes into this file.
  38  *! 24-Jul-2001 mk: Type-casted all definitions of WSX_STATUS types for
  39  *!                 removal of compile warnings.
  40  *! 22-Nov-1999 kc: Changes from code review.
  41  *! 18-Aug-1999 rr: Ported From WSX.
  42  *! 29-May-1996 gp: Removed WCD_ and WMD_ error ranges. Redefined format of
  43  *!                 error codes.
  44  *! 10-May-1996 gp: Created.
  45  */
  46
  47 #ifndef ERRBASE_
  48 #define ERRBASE_
  49
  50 #ifdef __cplusplus
  51 extern "C" {
  52 #endif
  53
  54 /* ========================================================================== */
  55 /* Base of generic errors and component errors                                */
  56 /* ========================================================================== */
  57 #define DSP_SBASE               (DSP_STATUS)0x00008000
  58 #define DSP_EBASE               (DSP_STATUS)0x80008000
  59
  60 #define DSP_COMP_EBASE          (DSP_STATUS)0x80040200
  61 #define DSP_COMP_ELAST          (DSP_STATUS)0x80047fff
  62
  63 /* ========================================================================== */
  64 /* SUCCESS Codes                                                              */
  65 /* ========================================================================== */
  66
  67 /* -------------------------------------------------------------------------- */
  68 /* Generic success code                                                       */
  69 /* -------------------------------------------------------------------------- */
  70 #define DSP_SOK                     (DSP_SBASE + 0)
  71
  72 /* -------------------------------------------------------------------------- */
  73 /* GPP is already attached to this DSP processor                              */
  74 /* -------------------------------------------------------------------------- */
  75 #define DSP_SALREADYATTACHED        (DSP_SBASE + 1)
  76
  77 /* -------------------------------------------------------------------------- */
  78 /* This is the last object available for enumeration.                         */
  79 /* -------------------------------------------------------------------------- */
  80 #define DSP_SENUMCOMPLETE           (DSP_SBASE + 2)
  81
  82 /* -------------------------------------------------------------------------- */
  83 /* The DSP is already asleep.                                                 */
  84 /* -------------------------------------------------------------------------- */
  85 #define DSP_SALREADYASLEEP          (DSP_SBASE + 3)
  86
  87 /* -------------------------------------------------------------------------- */
  88 /* The DSP is already awake.                                                 */
  89 /* -------------------------------------------------------------------------- */
  90 #define DSP_SALREADYAWAKE           (DSP_SBASE + 4)
  91
  92 /* -------------------------------------------------------------------------- */
  93 /* TRUE                                                                       */
  94 /* -------------------------------------------------------------------------- */
  95 #define DSP_STRUE                   (DSP_SBASE + 5)
  96
  97 /* -------------------------------------------------------------------------- */
  98 /* FALSE                                                                      */
  99 /* -------------------------------------------------------------------------- */
 100 #define DSP_SFALSE                  (DSP_SBASE + 6)
 101
 102 /* -------------------------------------------------------------------------- */
 103 /* A library contains no dependent library references                         */
 104 /* -------------------------------------------------------------------------- */
 105 #define DSP_SNODEPENDENTLIBS        (DSP_SBASE + 7)
 106
 107 /* -------------------------------------------------------------------------- */
 108 /* A persistent library is already loaded by the dynamic loader               */
 109 /* -------------------------------------------------------------------------- */
 110 #define DSP_SALREADYLOADED          (DSP_SBASE + 8)
 111
 112 /* -------------------------------------------------------------------------- */
 113 /* Some error occured, but it is OK to continue                               */
 114 /* -------------------------------------------------------------------------- */
 115 #define DSP_OKTO_CONTINUE          (DSP_SBASE + 9)
 116
 117 /* ========================================================================== */
 118 /* FAILURE Codes                                                              */
 119 /* ========================================================================== */
 120
 121 /* -------------------------------------------------------------------------- */
 122 /* The caller does not have access privileges to call this function           */
 123 /* -------------------------------------------------------------------------- */
 124 #define DSP_EACCESSDENIED           (DSP_EBASE + 0)
 125
 126 /* -------------------------------------------------------------------------- */
 127 /* The Specified Connection already exists                                    */
 128 /* -------------------------------------------------------------------------- */
 129 #define DSP_EALREADYCONNECTED       (DSP_EBASE + 1)
 130
 131 /* -------------------------------------------------------------------------- */
 132 /* The GPP must be detached from the DSP before this function is called       */
 133 /* -------------------------------------------------------------------------- */
 134 #define DSP_EATTACHED               (DSP_EBASE + 2)
 135
 136 /* -------------------------------------------------------------------------- */
 137 /* During enumeration a change in the number or properties of the objects     */
 138 /* has occurred.                                                              */
 139 /* -------------------------------------------------------------------------- */
 140 #define DSP_ECHANGEDURINGENUM       (DSP_EBASE + 3)
 141
 142 /* -------------------------------------------------------------------------- */
 143 /* An error occurred while parsing the DSP executable file                    */
 144 /* -------------------------------------------------------------------------- */
 145 #define DSP_ECORRUPTFILE            (DSP_EBASE + 4)
 146
 147 /* -------------------------------------------------------------------------- */
 148 /* A failure occurred during a delete operation                               */
 149 /* -------------------------------------------------------------------------- */
 150 #define DSP_EDELETE                 (DSP_EBASE + 5)
 151
 152 /* -------------------------------------------------------------------------- */
 153 /* The specified direction is invalid                                         */
 154 /* -------------------------------------------------------------------------- */
 155 #define DSP_EDIRECTION              (DSP_EBASE + 6)
 156
 157 /* -------------------------------------------------------------------------- */
 158 /* A stream has been issued the maximum number of buffers allowed in the      */
 159 /* stream at once ;  buffers must be reclaimed from the stream before any     */
 160 /* more can be issued.                                                        */
 161 /* -------------------------------------------------------------------------- */
 162 #define DSP_ESTREAMFULL             (DSP_EBASE + 7)
 163
 164 /* -------------------------------------------------------------------------- */
 165 /* A general failure occurred                                                 */
 166 /* -------------------------------------------------------------------------- */
 167 #define DSP_EFAIL                   (DSP_EBASE + 8)
 168
 169 /* -------------------------------------------------------------------------- */
 170 /* The specified executable file could not be found.                          */
 171 /* -------------------------------------------------------------------------- */
 172 #define DSP_EFILE                   (DSP_EBASE + 9)
 173
 174 /* -------------------------------------------------------------------------- */
 175 /* The specified handle is invalid.                                           */
 176 /* -------------------------------------------------------------------------- */
 177 #define DSP_EHANDLE                 (DSP_EBASE + 0xa)
 178
 179 /* -------------------------------------------------------------------------- */
 180 /* An invalid argument was specified.                                         */
 181 /* -------------------------------------------------------------------------- */
 182 #define DSP_EINVALIDARG             (DSP_EBASE + 0xb)
 183
 184 /* -------------------------------------------------------------------------- */
 185 /* A memory allocation failure occurred.                                      */
 186 /* -------------------------------------------------------------------------- */
 187 #define DSP_EMEMORY                 (DSP_EBASE + 0xc)
 188
 189 /* -------------------------------------------------------------------------- */
 190 /* The requested operation is invalid for this node type.                     */
 191 /* -------------------------------------------------------------------------- */
 192 #define DSP_ENODETYPE               (DSP_EBASE + 0xd)
 193
 194 /* -------------------------------------------------------------------------- */
 195 /* No error text was found for the specified error code.                      */
 196 /* -------------------------------------------------------------------------- */
 197 #define DSP_ENOERRTEXT              (DSP_EBASE + 0xe)
 198
 199 /* -------------------------------------------------------------------------- */
 200 /* No more connections can be made for this node.                             */
 201 /* -------------------------------------------------------------------------- */
 202 #define DSP_ENOMORECONNECTIONS      (DSP_EBASE + 0xf)
 203
 204 /* -------------------------------------------------------------------------- */
 205 /* The indicated operation is not supported.                                  */
 206 /* -------------------------------------------------------------------------- */
 207 #define DSP_ENOTIMPL                (DSP_EBASE + 0x10)
 208
 209 /* -------------------------------------------------------------------------- */
 210 /* I/O is currently pending.                                                  */
 211 /* -------------------------------------------------------------------------- */
 212 #define DSP_EPENDING                (DSP_EBASE + 0x11)
 213
 214 /* -------------------------------------------------------------------------- */
 215 /* An invalid pointer was specified.                                          */
 216 /* -------------------------------------------------------------------------- */
 217 #define DSP_EPOINTER                (DSP_EBASE + 0x12)
 218
 219 /* -------------------------------------------------------------------------- */
 220 /* A parameter is specified outside its valid range.                          */
 221 /* -------------------------------------------------------------------------- */
 222 #define DSP_ERANGE                  (DSP_EBASE + 0x13)
 223
 224 /* -------------------------------------------------------------------------- */
 225 /* An invalid size parameter was specified.                                    */
 226 /* -------------------------------------------------------------------------- */
 227 #define DSP_ESIZE                   (DSP_EBASE + 0x14)
 228
 229 /* -------------------------------------------------------------------------- */
 230 /* A stream creation failure occurred on the DSP.                             */
 231 /* -------------------------------------------------------------------------- */
 232 #define DSP_ESTREAM                 (DSP_EBASE + 0x15)
 233
 234 /* -------------------------------------------------------------------------- */
 235 /* A task creation failure occurred on the DSP.                               */
 236 /* -------------------------------------------------------------------------- */
 237 #define DSP_ETASK                   (DSP_EBASE + 0x16)
 238
 239 /* -------------------------------------------------------------------------- */
 240 /* A timeout occurred before the requested operation could complete.          */
 241 /* -------------------------------------------------------------------------- */
 242 #define DSP_ETIMEOUT                (DSP_EBASE + 0x17)
 243
 244 /* -------------------------------------------------------------------------- */
 245 /* A data truncation occurred, e.g., when requesting a descriptive error      */
 246 /* string, not enough space was allocated for the complete error message.     */
 247 /* -------------------------------------------------------------------------- */
 248 #define DSP_ETRUNCATED              (DSP_EBASE + 0x18)
 249
 250 /* -------------------------------------------------------------------------- */
 251 /* A parameter is invalid.                                                    */
 252 /* -------------------------------------------------------------------------- */
 253 #define DSP_EVALUE                  (DSP_EBASE + 0x1a)
 254
 255 /* -------------------------------------------------------------------------- */
 256 /* The state of the specified object is incorrect for the requested           */
 257 /* operation.                                                                 */
 258 /* -------------------------------------------------------------------------- */
 259 #define DSP_EWRONGSTATE             (DSP_EBASE + 0x1b)
 260
 261 /* -------------------------------------------------------------------------- */
 262 /* Symbol not found in the COFF file.  DSPNode_Create will return this if     */
 263 /* the iAlg function table for an xDAIS socket is not found in the COFF file. */
 264 /* In this case, force the symbol to be linked into the COFF file.            */
 265 /* DSPNode_Create, DSPNode_Execute, and DSPNode_Delete will return this if    */
 266 /* the create, execute, or delete phase function, respectively, could not be  */
 267 /* found in the COFF file.                                                    */
 268 /* -------------------------------------------------------------------------- */
 269 #define DSP_ESYMBOL                 (DSP_EBASE + 0x1c)
 270
 271 /* -------------------------------------------------------------------------- */
 272 /* UUID not found in registry.                                                */
 273 /* -------------------------------------------------------------------------- */
 274 #define DSP_EUUID                   (DSP_EBASE + 0x1d)
 275
 276 /* -------------------------------------------------------------------------- */
 277 /* Unable to read content of DCD data section ; this is typically caused by   */
 278 /* improperly configured nodes.                                               */
 279 /* -------------------------------------------------------------------------- */
 280 #define DSP_EDCDREADSECT            (DSP_EBASE + 0x1e)
 281
 282 /* -------------------------------------------------------------------------- */
 283 /* Unable to decode DCD data section content ; this is typically caused by    */
 284 /* changes to DSP/BIOS Bridge data structures.                                */
 285 /* -------------------------------------------------------------------------- */
 286 #define DSP_EDCDPARSESECT           (DSP_EBASE + 0x1f)
 287
 288 /* -------------------------------------------------------------------------- */
 289 /* Unable to get pointer to DCD data section ; this is typically caused by    */
 290 /* improperly configured UUIDs.                                               */
 291 /* -------------------------------------------------------------------------- */
 292 #define DSP_EDCDGETSECT             (DSP_EBASE + 0x20)
 293
 294 /* -------------------------------------------------------------------------- */
 295 /* Unable to load file containing DCD data section ; this is typically        */
 296 /* caused by a missing COFF file.                                             */
 297 /* -------------------------------------------------------------------------- */
 298 #define DSP_EDCDLOADBASE            (DSP_EBASE + 0x21)
 299
 300 /* -------------------------------------------------------------------------- */
 301 /* The specified COFF file does not contain a valid node registration         */
 302 /* section.                                                                   */
 303 /* -------------------------------------------------------------------------- */
 304 #define DSP_EDCDNOAUTOREGISTER      (DSP_EBASE + 0x22)
 305
 306 /* -------------------------------------------------------------------------- */
 307 /* A requested resource is not available.                                     */
 308 /* -------------------------------------------------------------------------- */
 309 #define DSP_ERESOURCE               (DSP_EBASE + 0x28)
 310
 311 /* -------------------------------------------------------------------------- */
 312 /* A critical error has occurred, and the DSP is being re-started.            */
 313 /* -------------------------------------------------------------------------- */
 314 #define DSP_ERESTART                (DSP_EBASE + 0x29)
 315
 316 /* -------------------------------------------------------------------------- */
 317 /* A DSP memory free operation failed.                                        */
 318 /* -------------------------------------------------------------------------- */
 319 #define DSP_EFREE                   (DSP_EBASE + 0x2a)
 320
 321 /* -------------------------------------------------------------------------- */
 322 /* A DSP I/O free operation failed.                                           */
 323 /* -------------------------------------------------------------------------- */
 324 #define DSP_EIOFREE                 (DSP_EBASE + 0x2b)
 325
 326 /* -------------------------------------------------------------------------- */
 327 /* Multiple instances are not allowed.                                        */
 328 /* -------------------------------------------------------------------------- */
 329 #define DSP_EMULINST                (DSP_EBASE + 0x2c)
 330
 331 /* -------------------------------------------------------------------------- */
 332 /* A specified entity was not found.                                          */
 333 /* -------------------------------------------------------------------------- */
 334 #define DSP_ENOTFOUND               (DSP_EBASE + 0x2d)
 335
 336 /* -------------------------------------------------------------------------- */
 337 /* A DSP I/O resource is not available.                                       */
 338 /* -------------------------------------------------------------------------- */
 339 #define DSP_EOUTOFIO                (DSP_EBASE + 0x2e)
 340
 341 /* -------------------------------------------------------------------------- */
 342 /* A shared memory buffer contained in a message or stream could not be       */
 343 /* mapped to the GPP client process's virtual space.                          */
 344 /* -------------------------------------------------------------------------- */
 345 #define DSP_ETRANSLATE              (DSP_EBASE + 0x2f)
 346
 347 /* -------------------------------------------------------------------------- */
 348 /* File or section load write function failed to write to DSP                 */
 349 /* -------------------------------------------------------------------------- */
 350 #define DSP_EFWRITE                 (DSP_EBASE + 0x31)
 351
 352 /* -------------------------------------------------------------------------- */
 353 /* Unable to find a named section in DSP executable                           */
 354 /* -------------------------------------------------------------------------- */
 355 #define DSP_ENOSECT                 (DSP_EBASE + 0x32)
 356
 357 /* -------------------------------------------------------------------------- */
 358 /* Unable to open file                                                        */
 359 /* -------------------------------------------------------------------------- */
 360 #define DSP_EFOPEN                  (DSP_EBASE + 0x33)
 361
 362 /* -------------------------------------------------------------------------- */
 363 /* Unable to read file                                                        */
 364 /* -------------------------------------------------------------------------- */
 365 #define DSP_EFREAD                  (DSP_EBASE + 0x34)
 366
 367 /* -------------------------------------------------------------------------- */
 368 /* A non-existent memory segment identifier was specified                     */
 369 /* -------------------------------------------------------------------------- */
 370 #define DSP_EOVERLAYMEMORY          (DSP_EBASE + 0x37)
 371
 372 /* -------------------------------------------------------------------------- */
 373 /* Invalid segment ID                                                         */
 374 /* -------------------------------------------------------------------------- */
 375 #define DSP_EBADSEGID               (DSP_EBASE + 0x38)
 376
 377 /* -------------------------------------------------------------------------- */
 378 /* Invalid alignment                                                          */
 379 /* -------------------------------------------------------------------------- */
 380 #define DSP_EALIGNMENT               (DSP_EBASE + 0x39)
 381
 382 /* -------------------------------------------------------------------------- */
 383 /* Invalid stream mode                                                        */
 384 /* -------------------------------------------------------------------------- */
 385 #define DSP_ESTRMMODE               (DSP_EBASE + 0x3a)
 386
 387 /* -------------------------------------------------------------------------- */
 388 /* Nodes not connected                                                        */
 389 /* -------------------------------------------------------------------------- */
 390 #define DSP_ENOTCONNECTED           (DSP_EBASE + 0x3b)
 391
 392 /* -------------------------------------------------------------------------- */
 393 /* Not shared memory                                                          */
 394 /* -------------------------------------------------------------------------- */
 395 #define DSP_ENOTSHAREDMEM           (DSP_EBASE + 0x3c)
 396
 397 /* -------------------------------------------------------------------------- */
 398 /* Error occurred in a dynamic loader library function                        */
 399 /* -------------------------------------------------------------------------- */
 400 #define DSP_EDYNLOAD                (DSP_EBASE + 0x3d)
 401
 402 /* -------------------------------------------------------------------------- */
 403 /* Device in 'sleep/suspend' mode due to DPM                                  */
 404 /* -------------------------------------------------------------------------- */
 405 #define DSP_EDPMSUSPEND             (DSP_EBASE + 0x3e)
 406
 407 /* -------------------------------------------------------------------------- */
 408 /* A node-specific error has occurred.                                        */
 409 /* -------------------------------------------------------------------------- */
 410 #define DSP_EUSER1                  (DSP_EBASE + 0x40)
 411 #define DSP_EUSER2                  (DSP_EBASE + 0x41)
 412 #define DSP_EUSER3                  (DSP_EBASE + 0x42)
 413 #define DSP_EUSER4                  (DSP_EBASE + 0x43)
 414 #define DSP_EUSER5                  (DSP_EBASE + 0x44)
 415 #define DSP_EUSER6                  (DSP_EBASE + 0x45)
 416 #define DSP_EUSER7                  (DSP_EBASE + 0x46)
 417 #define DSP_EUSER8                  (DSP_EBASE + 0x47)
 418 #define DSP_EUSER9                  (DSP_EBASE + 0x48)
 419 #define DSP_EUSER10                 (DSP_EBASE + 0x49)
 420 #define DSP_EUSER11                 (DSP_EBASE + 0x4a)
 421 #define DSP_EUSER12                 (DSP_EBASE + 0x4b)
 422 #define DSP_EUSER13                 (DSP_EBASE + 0x4c)
 423 #define DSP_EUSER14                 (DSP_EBASE + 0x4d)
 424 #define DSP_EUSER15                 (DSP_EBASE + 0x4e)
 425 #define DSP_EUSER16                 (DSP_EBASE + 0x4f)
 426
 427 /* ========================================================================== */
 428 /* FAILURE Codes : DEV                                                        */
 429 /* ========================================================================== */
 430 #define DEV_EBASE                   (DSP_COMP_EBASE + 0x000)
 431
 432 /* -------------------------------------------------------------------------- */
 433 /* The mini-driver expected a newer version of the class driver.              */
 434 /* -------------------------------------------------------------------------- */
 435 #define DEV_E_NEWWMD                (DEV_EBASE + 0x00)
 436
 437 /* -------------------------------------------------------------------------- */
 438 /* WMD_DRV_Entry function returned a NULL function interface table.           */
 439 /* -------------------------------------------------------------------------- */
 440 #define DEV_E_NULLWMDINTF           (DEV_EBASE + 0x01)
 441
 442 /* ========================================================================== */
 443 /* FAILURE Codes : LDR                                                        */
 444 /* ========================================================================== */
 445 #define LDR_EBASE                   (DSP_COMP_EBASE + 0x100)
 446
 447 /* -------------------------------------------------------------------------- */
 448 /* Insufficient memory to export class driver services.                       */
 449 /* -------------------------------------------------------------------------- */
 450 #define LDR_E_NOMEMORY              (LDR_EBASE + 0x00)
 451
 452 /* -------------------------------------------------------------------------- */
 453 /* Unable to find WMD file in system directory.                               */
 454 /* -------------------------------------------------------------------------- */
 455 #define LDR_E_FILEUNABLETOOPEN      (LDR_EBASE + 0x01)
 456
 457 /* ========================================================================== */
 458 /* FAILURE Codes : CFG                                                        */
 459 /* ========================================================================== */
 460 #define CFG_EBASE                   (DSP_COMP_EBASE + 0x200)
 461
 462 /* -------------------------------------------------------------------------- */
 463 /* Invalid pointer passed into a configuration module function                */
 464 /* -------------------------------------------------------------------------- */
 465 #define CFG_E_INVALIDPOINTER        (CFG_EBASE + 0x00)
 466
 467 /* -------------------------------------------------------------------------- */
 468 /* Invalid device node handle passed into a configuration module function.    */
 469 /* -------------------------------------------------------------------------- */
 470 #define CFG_E_INVALIDHDEVNODE       (CFG_EBASE + 0x01)
 471
 472 /* -------------------------------------------------------------------------- */
 473 /* Unable to retrieve resource information from the registry.                 */
 474 /* -------------------------------------------------------------------------- */
 475 #define CFG_E_RESOURCENOTAVAIL      (CFG_EBASE + 0x02)
 476
 477 /* -------------------------------------------------------------------------- */
 478 /* Unable to find board name key in registry.                                 */
 479 /* -------------------------------------------------------------------------- */
 480 #define CFG_E_INVALIDBOARDNAME      (CFG_EBASE + 0x03)
 481
 482 /* -------------------------------------------------------------------------- */
 483 /* Unable to find a device node in registry with given unit number.           */
 484 /* -------------------------------------------------------------------------- */
 485 #define CFG_E_INVALIDUNITNUM        (CFG_EBASE + 0x04)
 486
 487 /* -------------------------------------------------------------------------- */
 488 /* Insufficient buffer size                                                   */
 489 /* -------------------------------------------------------------------------- */
 490 #define CFG_E_INSUFFICIENTBUFSIZE   (CFG_EBASE + 0x05)
 491
 492 /* ========================================================================== */
 493 /* FAILURE Codes : BRD                                                        */
 494 /* ========================================================================== */
 495 #define BRD_EBASE                   (DSP_COMP_EBASE + 0x300)
 496
 497 /* -------------------------------------------------------------------------- */
 498 /* Board client does not have sufficient access rights for this operation.    */
 499 /* -------------------------------------------------------------------------- */
 500 #define BRD_E_ACCESSDENIED          (BRD_EBASE + 0x00)
 501
 502 /* -------------------------------------------------------------------------- */
 503 /* Unable to find trace buffer symbols in the DSP executable COFF file.       */
 504 /* -------------------------------------------------------------------------- */
 505 #define BRD_E_NOTRACEBUFFER         (BRD_EBASE + 0x01)
 506
 507 /* -------------------------------------------------------------------------- */
 508 /* Attempted to auto-start board, but no default DSP executable configured.   */
 509 /* -------------------------------------------------------------------------- */
 510 #define BRD_E_NOEXEC                (BRD_EBASE + 0x02)
 511
 512 /* -------------------------------------------------------------------------- */
 513 /* The operation failed because it was started from a wrong state             */
 514 /* -------------------------------------------------------------------------- */
 515 #define BRD_E_WRONGSTATE            (BRD_EBASE + 0x03)
 516
 517 /* ========================================================================== */
 518 /* FAILURE Codes : COD                                                        */
 519 /* ========================================================================== */
 520 #define COD_EBASE                   (DSP_COMP_EBASE + 0x400)
 521
 522 /* -------------------------------------------------------------------------- */
 523 /* No symbol table is loaded for this board.                                  */
 524 /* -------------------------------------------------------------------------- */
 525 #define COD_E_NOSYMBOLSLOADED       (COD_EBASE + 0x00)
 526
 527 /* -------------------------------------------------------------------------- */
 528 /* Symbol not found in for this board.                                        */
 529 /* -------------------------------------------------------------------------- */
 530 #define COD_E_SYMBOLNOTFOUND        (COD_EBASE + 0x01)
 531
 532 /* -------------------------------------------------------------------------- */
 533 /* ZL DLL module is not exporting the correct function interface.             */
 534 /* -------------------------------------------------------------------------- */
 535 #define COD_E_NOZLFUNCTIONS         (COD_EBASE + 0x02)
 536
 537 /* -------------------------------------------------------------------------- */
 538 /* Unable to initialize the ZL COFF parsing module.                           */
 539 /* -------------------------------------------------------------------------- */
 540 #define COD_E_ZLCREATEFAILED        (COD_EBASE + 0x03)
 541
 542 /* -------------------------------------------------------------------------- */
 543 /* Unable to open DSP executable COFF file.                                   */
 544 /* -------------------------------------------------------------------------- */
 545 #define COD_E_OPENFAILED            (COD_EBASE + 0x04)
 546
 547 /* -------------------------------------------------------------------------- */
 548 /* Unable to parse DSP executable COFF file.                                  */
 549 /* -------------------------------------------------------------------------- */
 550 #define COD_E_LOADFAILED            (COD_EBASE + 0x05)
 551
 552 /* -------------------------------------------------------------------------- */
 553 /* Unable to read DSP executable COFF file.                                   */
 554 /* -------------------------------------------------------------------------- */
 555 #define COD_E_READFAILED            (COD_EBASE + 0x06)
 556
 557 /* ========================================================================== */
 558 /* FAILURE Codes : CHNL                                                       */
 559 /* ========================================================================== */
 560 #define CHNL_EBASE                  (DSP_COMP_EBASE + 0x500)
 561
 562 /* -------------------------------------------------------------------------- */
 563 /* Attempt to created channel manager with too many channels.                 */
 564 /* -------------------------------------------------------------------------- */
 565 #define CHNL_E_MAXCHANNELS          (CHNL_EBASE + 0x00)
 566
 567 /* -------------------------------------------------------------------------- */
 568 /* No channel manager exists for this mini-driver.                            */
 569 /* -------------------------------------------------------------------------- */
 570 #define CHNL_E_NOMGR                (CHNL_EBASE + 0x01)
 571
 572 /* -------------------------------------------------------------------------- */
 573 /* No free channels are available.                                            */
 574 /* -------------------------------------------------------------------------- */
 575 #define CHNL_E_OUTOFSTREAMS         (CHNL_EBASE + 0x02)
 576
 577 /* -------------------------------------------------------------------------- */
 578 /* Channel ID is out of range.                                                */
 579 /* -------------------------------------------------------------------------- */
 580 #define CHNL_E_BADCHANID            (CHNL_EBASE + 0x03)
 581
 582 /* -------------------------------------------------------------------------- */
 583 /* Channel is already in use.                                                 */
 584 /* -------------------------------------------------------------------------- */
 585 #define CHNL_E_CHANBUSY             (CHNL_EBASE + 0x04)
 586
 587 /* -------------------------------------------------------------------------- */
 588 /* Invalid channel mode argument.                                             */
 589 /* -------------------------------------------------------------------------- */
 590 #define CHNL_E_BADMODE              (CHNL_EBASE + 0x05)
 591
 592 /* -------------------------------------------------------------------------- */
 593 /* dwTimeOut parameter was CHNL_IOCNOWAIT, yet no I/O completions were        */
 594 /* queued.                                                                    */
 595 /* -------------------------------------------------------------------------- */
 596 #define CHNL_E_NOIOC                (CHNL_EBASE + 0x06)
 597
 598 /* -------------------------------------------------------------------------- */
 599 /* I/O has been cancelled on this channel.                                    */
 600 /* -------------------------------------------------------------------------- */
 601 #define CHNL_E_CANCELLED            (CHNL_EBASE + 0x07)
 602
 603 /* -------------------------------------------------------------------------- */
 604 /* End of stream was already requested on this output channel.                */
 605 /* -------------------------------------------------------------------------- */
 606 #define CHNL_E_EOS                  (CHNL_EBASE + 0x09)
 607
 608 /* -------------------------------------------------------------------------- */
 609 /* Unable to create the channel event object.                                 */
 610 /* -------------------------------------------------------------------------- */
 611 #define CHNL_E_CREATEEVENT          (CHNL_EBASE + 0x0A)
 612
 613 /* -------------------------------------------------------------------------- */
 614 /* Board name and unit number do not identify a valid board name.             */
 615 /* -------------------------------------------------------------------------- */
 616 #define CHNL_E_BRDID                (CHNL_EBASE + 0x0B)
 617
 618 /* -------------------------------------------------------------------------- */
 619 /* Invalid IRQ configured for this WMD for this system.                       */
 620 /* -------------------------------------------------------------------------- */
 621 #define CHNL_E_INVALIDIRQ           (CHNL_EBASE + 0x0C)
 622
 623 /* -------------------------------------------------------------------------- */
 624 /* DSP word size of zero configured for this device.                          */
 625 /* -------------------------------------------------------------------------- */
 626 #define CHNL_E_INVALIDWORDSIZE      (CHNL_EBASE + 0x0D)
 627
 628 /* -------------------------------------------------------------------------- */
 629 /* A zero length memory base was specified for a shared memory class driver.  */
 630 /* -------------------------------------------------------------------------- */
 631 #define CHNL_E_INVALIDMEMBASE       (CHNL_EBASE + 0x0E)
 632
 633 /* -------------------------------------------------------------------------- */
 634 /* Memory map is not configured, or unable to map physical to linear          */
 635 /* address.                                                                   */
 636 /* -------------------------------------------------------------------------- */
 637 #define CHNL_E_NOMEMMAP             (CHNL_EBASE + 0x0F)
 638
 639 /* -------------------------------------------------------------------------- */
 640 /* Attempted to create a channel manager  when one already exists.            */
 641 /* -------------------------------------------------------------------------- */
 642 #define CHNL_E_MGREXISTS            (CHNL_EBASE + 0x10)
 643
 644 /* -------------------------------------------------------------------------- */
 645 /* Unable to plug channel ISR for configured IRQ.                             */
 646 /* -------------------------------------------------------------------------- */
 647 #define CHNL_E_ISR                  (CHNL_EBASE + 0x11)
 648
 649 /* -------------------------------------------------------------------------- */
 650 /* No free I/O request packets are available.                                 */
 651 /* -------------------------------------------------------------------------- */
 652 #define CHNL_E_NOIORPS              (CHNL_EBASE + 0x12)
 653
 654 /* -------------------------------------------------------------------------- */
 655 /* Buffer size is larger than the size of physical channel.                   */
 656 /* -------------------------------------------------------------------------- */
 657 #define CHNL_E_BUFSIZE              (CHNL_EBASE + 0x13)
 658
 659 /* -------------------------------------------------------------------------- */
 660 /* User cannot mark end of stream on an input channel.                        */
 661 /* -------------------------------------------------------------------------- */
 662 #define CHNL_E_NOEOS                (CHNL_EBASE + 0x14)
 663
 664 /* -------------------------------------------------------------------------- */
 665 /* Wait for flush operation on an output channel timed out.                   */
 666 /* -------------------------------------------------------------------------- */
 667 #define CHNL_E_WAITTIMEOUT          (CHNL_EBASE + 0x15)
 668
 669 /* -------------------------------------------------------------------------- */
 670 /* User supplied hEvent must be specified with pstrEventName attribute        */
 671 /* -------------------------------------------------------------------------- */
 672 #define CHNL_E_BADUSEREVENT         (CHNL_EBASE + 0x16)
 673
 674 /* -------------------------------------------------------------------------- */
 675 /* Illegal user event name specified                                          */
 676 /* -------------------------------------------------------------------------- */
 677 #define CHNL_E_USEREVENTNAME        (CHNL_EBASE + 0x17)
 678
 679 /* -------------------------------------------------------------------------- */
 680 /* Unable to prepare buffer specified                                         */
 681 /* -------------------------------------------------------------------------- */
 682 #define CHNL_E_PREPFAILED           (CHNL_EBASE + 0x18)
 683
 684 /* -------------------------------------------------------------------------- */
 685 /* Unable to Unprepare buffer specified                                       */
 686 /* -------------------------------------------------------------------------- */
 687 #define CHNL_E_UNPREPFAILED         (CHNL_EBASE + 0x19)
 688
 689 /* ========================================================================== */
 690 /* FAILURE Codes : SYNC                                                       */
 691 /* ========================================================================== */
 692 #define SYNC_EBASE                  (DSP_COMP_EBASE + 0x600)
 693
 694 /* -------------------------------------------------------------------------- */
 695 /* Wait on a kernel event failed.                                             */
 696 /* -------------------------------------------------------------------------- */
 697 #define SYNC_E_FAIL                 (SYNC_EBASE + 0x00)
 698
 699 /* -------------------------------------------------------------------------- */
 700 /* Timeout expired while waiting for event to be signalled.                   */
 701 /* -------------------------------------------------------------------------- */
 702 #define SYNC_E_TIMEOUT              (SYNC_EBASE + 0x01)
 703
 704 /* ========================================================================== */
 705 /* FAILURE Codes : WMD                                                        */
 706 /* ========================================================================== */
 707 #define WMD_EBASE                   (DSP_COMP_EBASE + 0x700)
 708
 709 /* -------------------------------------------------------------------------- */
 710 /* A test of hardware assumptions or integrity failed.                        */
 711 /* -------------------------------------------------------------------------- */
 712 #define WMD_E_HARDWARE              (WMD_EBASE + 0x00)
 713
 714 /* -------------------------------------------------------------------------- */
 715 /* One or more configuration parameters violated WMD hardware assumptions.    */
 716 /* -------------------------------------------------------------------------- */
 717 #define WMD_E_BADCONFIG             (WMD_EBASE + 0x01)
 718
 719 /* -------------------------------------------------------------------------- */
 720 /* Timeout occurred waiting for a response from the hardware.                 */
 721 /* -------------------------------------------------------------------------- */
 722 #define WMD_E_TIMEOUT               (WMD_EBASE + 0x02)
 723
 724 /* ========================================================================== */
 725 /* FAILURE Codes : REG                                                        */
 726 /* ========================================================================== */
 727 #define REG_EBASE                   (DSP_COMP_EBASE + 0x800)
 728
 729 /* -------------------------------------------------------------------------- */
 730 /* Invalid subkey parameter.                                                  */
 731 /* -------------------------------------------------------------------------- */
 732 #define REG_E_INVALIDSUBKEY         (REG_EBASE + 0x00)
 733
 734 /* -------------------------------------------------------------------------- */
 735 /* Invalid entry parameter.                                                   */
 736 /* -------------------------------------------------------------------------- */
 737 #define REG_E_INVALIDENTRY          (REG_EBASE + 0x01)
 738
 739 /* -------------------------------------------------------------------------- */
 740 /* No more registry values.                                                   */
 741 /* -------------------------------------------------------------------------- */
 742 #define REG_E_NOMOREITEMS           (REG_EBASE + 0x02)
 743
 744 /* -------------------------------------------------------------------------- */
 745 /* Insufficient space to hold data in registry value.                         */
 746 /* -------------------------------------------------------------------------- */
 747 #define REG_E_MOREDATA              (REG_EBASE + 0x03)
 748
 749 /* ========================================================================== */
 750 /* FAILURE Codes : KFILE                                                      */
 751 /* ========================================================================== */
 752 #define KFILE_EBASE                 (DSP_COMP_EBASE + 0x900)
 753
 754 /* -------------------------------------------------------------------------- */
 755 /* Invalid file handle.                                                       */
 756 /* -------------------------------------------------------------------------- */
 757 #define E_KFILE_INVALIDHANDLE       (KFILE_EBASE + 0x01)
 758
 759 /* -------------------------------------------------------------------------- */
 760 /* Bad file name.                                                             */
 761 /* -------------------------------------------------------------------------- */
 762 #define E_KFILE_BADFILENAME         (KFILE_EBASE + 0x02)
 763
 764 /* -------------------------------------------------------------------------- */
 765 /* Invalid file mode.                                                         */
 766 /* -------------------------------------------------------------------------- */
 767 #define E_KFILE_INVALIDMODE         (KFILE_EBASE + 0x03)
 768
 769 /* -------------------------------------------------------------------------- */
 770 /* No resources available.                                                    */
 771 /* -------------------------------------------------------------------------- */
 772 #define E_KFILE_NORESOURCES         (KFILE_EBASE + 0x04)
 773
 774 /* -------------------------------------------------------------------------- */
 775 /* Invalid file buffer        .                                               */
 776 /* -------------------------------------------------------------------------- */
 777 #define E_KFILE_INVALIDBUFFER       (KFILE_EBASE + 0x05)
 778
 779 /* -------------------------------------------------------------------------- */
 780 /* Bad origin argument.                                                       */
 781 /* -------------------------------------------------------------------------- */
 782 #define E_KFILE_BADORIGINFLAG       (KFILE_EBASE + 0x06)
 783
 784 /* -------------------------------------------------------------------------- */
 785 /* Invalid file offset value.                                                 */
 786 /* -------------------------------------------------------------------------- */
 787 #define E_KFILE_INVALIDOFFSET       (KFILE_EBASE + 0x07)
 788
 789 /* -------------------------------------------------------------------------- */
 790 /* General KFILE error condition                                              */
 791 /* -------------------------------------------------------------------------- */
 792 #define E_KFILE_ERROR               (KFILE_EBASE + 0x08)
 793
 794 #ifdef __cplusplus
 795 }
 796 #endif
 797 #endif                          /* ERRBASE_ */