1 # SOME DESCRIPTIVE TITLE
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "POT-Creation-Date: 2014-04-17 13:14+0900\n"
11 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
12 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
13 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
19 #. Copyright (C) 2011, Hewlett-Packard Development Company, L.P.
20 #. Written by Stephen M. Cameron <scameron@beardog.cce.hp.com>
22 #. %%%LICENSE_START(GPLv2_ONELINE)
23 #. Licensed under GNU General Public License version 2 (GPLv2)
26 #. shorthand for double quote that works everywhere.
28 #: build/C/man4/cciss.4:9 build/C/man4/hpsa.4:9
34 #: build/C/man4/cciss.4:10
40 #: build/C/man4/cciss.4:10 build/C/man4/console_codes.4:23 build/C/man4/dsp56k.4:27 build/C/man4/hpsa.4:10 build/C/man4/sk98lin.4:27
46 #: build/C/man4/cciss.4:10 build/C/man4/console.4:12 build/C/man4/console_codes.4:23 build/C/man4/console_ioctl.4:40 build/C/man5/core.5:25 build/C/man4/cpuid.4:26 build/C/man4/dsp56k.4:27 build/C/man4/fd.4:28 build/C/man7/fifo.7:13 build/C/man4/full.4:26 build/C/man3/gnu_get_libc_version.3:26 build/C/man4/hd.4:29 build/C/man4/hpsa.4:10 build/C/man4/initrd.4:35 build/C/man4/lp.4:27 build/C/man3/makedev.3:26 build/C/man4/mem.4:26 build/C/man2/mknod.2:15 build/C/man4/mouse.4:26 build/C/man4/msr.4:26 build/C/man4/null.4:26 build/C/man7/pipe.7:25 build/C/man4/ram.4:26 build/C/man4/random.4:19 build/C/man4/sd.4:26 build/C/man4/sk98lin.4:27 build/C/man4/st.4:25 build/C/man2/syslog.2:31 build/C/man3/syslog.3:36 build/C/man4/ttyS.4:26 build/C/man7/uri.7:48 build/C/man4/vcs.4:29 build/C/man4/wavelan.4:15
52 #: build/C/man4/cciss.4:10 build/C/man4/console.4:12 build/C/man4/console_codes.4:23 build/C/man4/console_ioctl.4:40 build/C/man5/core.5:25 build/C/man4/cpuid.4:26 build/C/man4/dsp56k.4:27 build/C/man4/fd.4:28 build/C/man7/fifo.7:13 build/C/man4/full.4:26 build/C/man3/gnu_get_libc_version.3:26 build/C/man4/hd.4:29 build/C/man4/hpsa.4:10 build/C/man4/initrd.4:35 build/C/man4/lp.4:27 build/C/man3/makedev.3:26 build/C/man4/mem.4:26 build/C/man3/mkfifo.3:28 build/C/man2/mknod.2:15 build/C/man4/mouse.4:26 build/C/man4/msr.4:26 build/C/man4/null.4:26 build/C/man7/pipe.7:25 build/C/man4/ram.4:26 build/C/man4/random.4:19 build/C/man4/sd.4:26 build/C/man3/setlogmask.3:25 build/C/man4/sk98lin.4:27 build/C/man4/st.4:25 build/C/man3/stdarg.3:43 build/C/man2/syslog.2:31 build/C/man3/syslog.3:36 build/C/man4/ttyS.4:26 build/C/man7/uri.7:48 build/C/man4/vcs.4:29 build/C/man4/wavelan.4:15
54 msgid "Linux Programmer's Manual"
58 #: build/C/man4/cciss.4:11 build/C/man4/console.4:13 build/C/man4/console_codes.4:24 build/C/man4/console_ioctl.4:41 build/C/man5/core.5:26 build/C/man4/cpuid.4:27 build/C/man4/dsp56k.4:28 build/C/man4/fd.4:29 build/C/man7/fifo.7:14 build/C/man4/full.4:27 build/C/man3/gnu_get_libc_version.3:27 build/C/man4/hd.4:30 build/C/man4/hpsa.4:11 build/C/man4/initrd.4:36 build/C/man4/lp.4:28 build/C/man3/makedev.3:27 build/C/man4/mem.4:27 build/C/man3/mkfifo.3:29 build/C/man2/mknod.2:16 build/C/man4/mouse.4:27 build/C/man4/msr.4:27 build/C/man4/null.4:27 build/C/man7/pipe.7:26 build/C/man4/ram.4:27 build/C/man4/random.4:20 build/C/man4/sd.4:27 build/C/man3/setlogmask.3:26 build/C/man4/sk98lin.4:28 build/C/man4/st.4:26 build/C/man3/stdarg.3:44 build/C/man2/syslog.2:32 build/C/man3/syslog.3:37 build/C/man4/ttyS.4:27 build/C/man7/uri.7:49 build/C/man4/vcs.4:30 build/C/man4/wavelan.4:16
64 #: build/C/man4/cciss.4:13
65 msgid "cciss - HP Smart Array block driver"
69 #: build/C/man4/cciss.4:13 build/C/man4/dsp56k.4:30 build/C/man3/gnu_get_libc_version.3:29 build/C/man4/hpsa.4:13 build/C/man4/lp.4:30 build/C/man3/makedev.3:29 build/C/man3/mkfifo.3:31 build/C/man2/mknod.2:18 build/C/man4/random.4:22 build/C/man4/sd.4:29 build/C/man3/setlogmask.3:28 build/C/man4/sk98lin.4:30 build/C/man4/st.4:28 build/C/man3/stdarg.3:46 build/C/man2/syslog.2:35 build/C/man3/syslog.3:39 build/C/man7/uri.7:51 build/C/man4/wavelan.4:18
75 #: build/C/man4/cciss.4:16
77 msgid "modprobe cciss [ cciss_allow_hpsa=1 ]\n"
81 #: build/C/man4/cciss.4:17 build/C/man4/console.4:15 build/C/man4/console_codes.4:26 build/C/man4/console_ioctl.4:43 build/C/man5/core.5:28 build/C/man4/cpuid.4:29 build/C/man4/dsp56k.4:46 build/C/man4/fd.4:131 build/C/man7/fifo.7:16 build/C/man4/full.4:39 build/C/man3/gnu_get_libc_version.3:36 build/C/man4/hd.4:32 build/C/man4/hpsa.4:17 build/C/man4/initrd.4:71 build/C/man4/lp.4:43 build/C/man3/makedev.3:39 build/C/man4/mem.4:29 build/C/man3/mkfifo.3:62 build/C/man2/mknod.2:46 build/C/man4/mouse.4:33 build/C/man4/msr.4:29 build/C/man4/null.4:29 build/C/man7/pipe.7:28 build/C/man4/ram.4:29 build/C/man4/random.4:26 build/C/man4/sd.4:71 build/C/man3/setlogmask.3:34 build/C/man4/sk98lin.4:62 build/C/man4/st.4:37 build/C/man3/stdarg.3:56 build/C/man2/syslog.2:46 build/C/man3/syslog.3:59 build/C/man4/ttyS.4:29 build/C/man7/uri.7:71 build/C/man4/vcs.4:32 build/C/man4/wavelan.4:20
87 #: build/C/man4/cciss.4:20
88 msgid "B<cciss> is a block driver for older HP Smart Array RAID controllers."
92 #: build/C/man4/cciss.4:20 build/C/man4/hpsa.4:20 build/C/man4/initrd.4:180
98 #: build/C/man4/cciss.4:29
100 "I<cciss_allow_hpsa=1>: This option prevents the B<cciss> driver from "
101 "attempting to drive any controllers that the B<hpsa>(4) driver is capable "
102 "of controlling, which is to say, the B<cciss> driver is restricted by this "
103 "option to the following controllers:"
107 #: build/C/man4/cciss.4:48
110 " Smart Array 5300\n"
113 " Smart Array 5312\n"
116 " Smart Array 6400\n"
117 " Smart Array 6400 EM\n"
119 " Smart Array P600\n"
120 " Smart Array P400i\n"
121 " Smart Array E200i\n"
122 " Smart Array E200\n"
123 " Smart Array E200i\n"
124 " Smart Array E200i\n"
125 " Smart Array E200i\n"
126 " Smart Array E500\n"
130 #: build/C/man4/cciss.4:49 build/C/man4/hpsa.4:39
132 msgid "Supported hardware"
136 #: build/C/man4/cciss.4:53
137 msgid "The B<cciss> driver supports the following Smart Array boards:"
141 #: build/C/man4/cciss.4:79
144 " Smart Array 5300\n"
147 " Smart Array 5312\n"
150 " Smart Array 6400\n"
151 " Smart Array 6400 U320 Expansion Module\n"
153 " Smart Array P600\n"
154 " Smart Array P800\n"
155 " Smart Array E400\n"
156 " Smart Array P400i\n"
157 " Smart Array E200\n"
158 " Smart Array E200i\n"
159 " Smart Array E500\n"
160 " Smart Array P700m\n"
161 " Smart Array P212\n"
162 " Smart Array P410\n"
163 " Smart Array P410i\n"
164 " Smart Array P411\n"
165 " Smart Array P812\n"
166 " Smart Array P712m\n"
167 " Smart Array P711m\n"
171 #: build/C/man4/cciss.4:80 build/C/man4/hpsa.4:55
173 msgid "Configuration details"
177 #: build/C/man4/cciss.4:89 build/C/man4/hpsa.4:63
179 "To configure HP Smart Array controllers, use the HP Array Configuration "
180 "Utility (either B<hpacuxe>(8) or B<hpacucli>(8)) or the Offline ROM-based "
181 "Configuration Utility (ORCA) run from the Smart Array's option ROM at boot "
186 #: build/C/man4/cciss.4:89 build/C/man4/console.4:91 build/C/man4/dsp56k.4:110 build/C/man4/fd.4:194 build/C/man4/full.4:59 build/C/man4/hd.4:103 build/C/man4/hpsa.4:63 build/C/man4/initrd.4:418 build/C/man4/lp.4:126 build/C/man4/mem.4:78 build/C/man4/mouse.4:180 build/C/man4/null.4:57 build/C/man4/ram.4:41 build/C/man4/random.4:275 build/C/man4/sd.4:131 build/C/man4/sk98lin.4:574 build/C/man4/st.4:879 build/C/man4/ttyS.4:46 build/C/man4/vcs.4:93
192 #: build/C/man4/cciss.4:90 build/C/man4/hpsa.4:64
198 #: build/C/man4/cciss.4:92
199 msgid "The device naming scheme is as follows:"
203 #: build/C/man4/cciss.4:95
205 msgid "Major numbers:\n"
209 #: build/C/man4/cciss.4:104
223 #: build/C/man4/cciss.4:106
225 msgid "Minor numbers:\n"
229 #: build/C/man4/cciss.4:113
232 " b7 b6 b5 b4 b3 b2 b1 b0\n"
233 " |----+----| |----+----|\n"
235 " | +-------- Partition ID (0=wholedev, 1-15 partition)\n"
237 " +-------------------- Logical Volume number\n"
241 #: build/C/man4/cciss.4:115
243 msgid "The device naming scheme is:\n"
247 #: build/C/man4/cciss.4:120
250 " /dev/cciss/c0d0 Controller 0, disk 0, whole device\n"
251 " /dev/cciss/c0d0p1 Controller 0, disk 0, partition 1\n"
252 " /dev/cciss/c0d0p2 Controller 0, disk 0, partition 2\n"
253 " /dev/cciss/c0d0p3 Controller 0, disk 0, partition 3\n"
257 #: build/C/man4/cciss.4:125
260 " /dev/cciss/c1d1 Controller 1, disk 1, whole device\n"
261 " /dev/cciss/c1d1p1 Controller 1, disk 1, partition 1\n"
262 " /dev/cciss/c1d1p2 Controller 1, disk 1, partition 2\n"
263 " /dev/cciss/c1d1p3 Controller 1, disk 1, partition 3\n"
267 #: build/C/man4/cciss.4:126
269 msgid "Files in /proc"
273 #: build/C/man4/cciss.4:132
275 "The files I</proc/driver/cciss/cciss[0-9]+> contain information about the "
276 "configuration of each controller. For example:"
280 #: build/C/man4/cciss.4:152
283 " $ B<cd /proc/driver/cciss>\n"
286 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss0\n"
287 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss1\n"
288 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss2\n"
290 " cciss2: HP Smart Array P800 Controller\n"
291 " Board ID: 0x3223103c\n"
292 " Firmware Version: 7.14\n"
294 " Logical drives: 1\n"
295 " Current Q depth: 0\n"
296 " Current # commands on controller: 0\n"
297 " Max Q depth since init: 1\n"
298 " Max # commands on controller since init: 2\n"
299 " Max SG entries since init: 32\n"
300 " Sequential access devices: 0\n"
304 #: build/C/man4/cciss.4:154
306 msgid " cciss/c2d0: 36.38GB RAID 0\n"
310 #: build/C/man4/cciss.4:155
312 msgid "Files in /sys"
316 #: build/C/man4/cciss.4:156
318 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/model>"
322 #: build/C/man4/cciss.4:162
324 "Displays the SCSI INQUIRY page 0 model for logical drive I<Y> of controller "
329 #: build/C/man4/cciss.4:162
331 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/rev>"
335 #: build/C/man4/cciss.4:168
337 "Displays the SCSI INQUIRY page 0 revision for logical drive I<Y> of "
342 #: build/C/man4/cciss.4:168
344 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/unique_id>"
348 #: build/C/man4/cciss.4:174
350 "Displays the SCSI INQUIRY page 83 serial number for logical drive I<Y> of "
355 #: build/C/man4/cciss.4:174
357 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/vendor>"
361 #: build/C/man4/cciss.4:180
363 "Displays the SCSI INQUIRY page 0 vendor for logical drive I<Y> of controller "
368 #: build/C/man4/cciss.4:180
370 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/block:cciss!cXdY>"
374 #: build/C/man4/cciss.4:184
375 msgid "A symbolic link to I</sys/block/cciss!cXdY>."
379 #: build/C/man4/cciss.4:184
381 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/rescan>"
385 #: build/C/man4/cciss.4:188
387 "When this file is written to, the driver rescans the controller to discover "
388 "any new, removed, or modified logical drives."
392 #: build/C/man4/cciss.4:188
394 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/resettable>"
398 #: build/C/man4/cciss.4:197
400 "A value of 1 displayed in this file indicates that the \"reset_devices=1\" "
401 "kernel parameter (used by B<kdump>) is honored by this controller. A value "
402 "of 0 indicates that the \"reset_devices=1\" kernel parameter will not be "
403 "honored. Some models of Smart Array are not able to honor this parameter."
407 #: build/C/man4/cciss.4:197
409 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/lunid>"
413 #: build/C/man4/cciss.4:203
415 "Displays the 8-byte LUN ID used to address logical drive I<Y> of controller "
420 #: build/C/man4/cciss.4:203
422 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/raid_level>"
426 #: build/C/man4/cciss.4:209
427 msgid "Displays the RAID level of logical drive I<Y> of controller I<X>."
431 #: build/C/man4/cciss.4:209
433 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/usage_count>"
437 #: build/C/man4/cciss.4:215
439 "Displays the usage count (number of opens) of logical drive I<Y> of "
444 #: build/C/man4/cciss.4:215
446 msgid "SCSI tape drive and medium changer support"
450 #: build/C/man4/cciss.4:226
452 "SCSI sequential access devices and medium changer devices are supported and "
453 "appropriate device nodes are automatically created (e.g., I</dev/st0>, "
454 "I</dev/st1>, etc.; see B<st>(4) for more details.) You must enable \"SCSI "
455 "tape drive support for Smart Array 5xxx\" and \"SCSI support\" in your "
456 "kernel configuration to be able to use SCSI tape drives with your Smart "
457 "Array 5xxx controller."
461 #: build/C/man4/cciss.4:244
463 "Additionally, note that the driver will not engage the SCSI core at init "
464 "time. The driver must be directed to dynamically engage the SCSI core via "
465 "the I</proc> filesystem entry, which the \"block\" side of the driver "
466 "creates as I</proc/driver/cciss/cciss*> at run time. This is because at "
467 "driver init time, the SCSI core may not yet be initialized (because the "
468 "driver is a block driver) and attempting to register it with the SCSI core "
469 "in such a case would cause a hang. This is best done via an initialization "
470 "script (typically in I</etc/init.d>, but could vary depending on "
471 "distribution). For example:"
475 #: build/C/man4/cciss.4:250
478 " for x in /proc/driver/cciss/cciss[0-9]*\n"
480 " echo \"engage scsi\" E<gt> $x\n"
485 #: build/C/man4/cciss.4:254
487 "Once the SCSI core is engaged by the driver, it cannot be disengaged (except "
488 "by unloading the driver, if it happens to be linked as a module.)"
492 #: build/C/man4/cciss.4:258
494 "Note also that if no sequential access devices or medium changers are "
495 "detected, the SCSI core will not be engaged by the action of the above "
500 #: build/C/man4/cciss.4:258
502 msgid "Hot plug support for SCSI tape drives"
506 #: build/C/man4/cciss.4:268
508 "Hot plugging of SCSI tape drives is supported, with some caveats. The "
509 "B<cciss> driver must be informed that changes to the SCSI bus have been "
510 "made. This may be done via the I</proc> filesystem. For example:"
514 #: build/C/man4/cciss.4:270
516 msgid " echo \"rescan\" E<gt> /proc/scsi/cciss0/1\n"
520 #: build/C/man4/cciss.4:272
521 msgid "This causes the driver to:"
525 #: build/C/man4/cciss.4:273 build/C/man4/initrd.4:97 build/C/man4/initrd.4:323 build/C/man4/initrd.4:430 build/C/man4/st.4:892 build/C/man7/uri.7:532
531 #: build/C/man4/cciss.4:276
533 "query the adapter about changes to the physical SCSI buses and/or fibre "
534 "channel arbitrated loop, and"
538 #: build/C/man4/cciss.4:276 build/C/man4/initrd.4:101 build/C/man4/initrd.4:331 build/C/man4/initrd.4:441 build/C/man4/st.4:912 build/C/man7/uri.7:536
544 #: build/C/man4/cciss.4:279
546 "make note of any new or removed sequential access devices or medium "
551 #: build/C/man4/cciss.4:286
553 "The driver will output messages indicating which devices have been added or "
554 "removed and the controller, bus, target, and lun used to address each "
555 "device. The driver then notifies the SCSI midlayer of these changes."
559 #: build/C/man4/cciss.4:293
561 "Note that the naming convention of the I</proc> filesystem entries contains "
562 "a number in addition to the driver name (e.g., \"cciss0\" instead of just "
563 "\"cciss\", which you might expect)."
567 #: build/C/man4/cciss.4:311
569 "Note: I<Only> sequential access devices and medium changers are presented as "
570 "SCSI devices to the SCSI midlayer by the B<cciss> driver. Specifically, "
571 "physical SCSI disk drives are I<not> presented to the SCSI midlayer. The "
572 "only disk devices that are presented to the kernel are logical drives that "
573 "the array controller constructs from regions on the physical drives. The "
574 "logical drives are presented to the block layer (not to the SCSI midlayer). "
575 "It is important for the driver to prevent the kernel from accessing the "
576 "physical drives directly, since these drives are used by the array "
577 "controller to construct the logical drives."
581 #: build/C/man4/cciss.4:311
583 msgid "SCSI error handling for tape drives and medium changers"
587 #: build/C/man4/cciss.4:319
589 "The Linux SCSI midlayer provides an error-handling protocol that is "
590 "initiated whenever a SCSI command fails to complete within a certain amount "
591 "of time (which can vary depending on the command). The B<cciss> driver "
592 "participates in this protocol to some extent. The normal protocol is a "
597 #: build/C/man4/cciss.4:319 build/C/man4/cciss.4:321 build/C/man4/cciss.4:323 build/C/man4/cciss.4:325 build/C/man5/core.5:49 build/C/man5/core.5:61 build/C/man5/core.5:65 build/C/man5/core.5:69 build/C/man5/core.5:72 build/C/man5/core.5:85 build/C/man5/core.5:88 build/C/man5/core.5:101 build/C/man5/core.5:218 build/C/man5/core.5:222 build/C/man5/core.5:225 build/C/man5/core.5:229
603 #: build/C/man4/cciss.4:321
604 msgid "First, the device is told to abort the command."
608 #: build/C/man4/cciss.4:323
609 msgid "If that doesn't work, the device is reset."
613 #: build/C/man4/cciss.4:325
614 msgid "If that doesn't work, the SCSI bus is reset."
618 #: build/C/man4/cciss.4:327
619 msgid "If that doesn't work, the host bus adapter is reset."
623 #: build/C/man4/cciss.4:345
625 "The B<cciss> driver is a block driver as well as a SCSI driver and only the "
626 "tape drives and medium changers are presented to the SCSI midlayer "
627 "Furthermore, unlike more straightforward SCSI drivers, disk I/O continues "
628 "through the block side during the SCSI error-recovery process Therefore, the "
629 "B<cciss> driver implements only the first two of these actions, aborting the "
630 "command, and resetting the device. Note also that most tape drives will not "
631 "oblige in aborting commands, and sometimes it appears they will not even "
632 "obey a reset command, though in most circumstances they will. If the "
633 "command cannot be aborted and the device cannot be reset, the device will be "
638 #: build/C/man4/cciss.4:353
640 "In the event that the error-handling code is triggered and a tape drive is "
641 "successfully reset or the tardy command is successfully aborted, the tape "
642 "drive may still not allow I/O to continue until some command is issued that "
643 "positions the tape to a known position. Typically you must rewind the tape "
644 "(by issuing I<mt -f /dev/st0 rewind> for example) before I/O can proceed "
645 "again to a tape drive that was reset."
649 #: build/C/man4/cciss.4:353 build/C/man4/console.4:95 build/C/man4/console_codes.4:642 build/C/man4/console_ioctl.4:846 build/C/man5/core.5:423 build/C/man4/cpuid.4:89 build/C/man4/dsp56k.4:115 build/C/man4/fd.4:213 build/C/man7/fifo.7:65 build/C/man4/full.4:61 build/C/man3/gnu_get_libc_version.3:76 build/C/man4/hd.4:105 build/C/man4/hpsa.4:179 build/C/man4/initrd.4:474 build/C/man4/lp.4:135 build/C/man3/makedev.3:80 build/C/man4/mem.4:84 build/C/man3/mkfifo.3:197 build/C/man2/mknod.2:284 build/C/man4/mouse.4:184 build/C/man4/msr.4:55 build/C/man4/null.4:64 build/C/man7/pipe.7:232 build/C/man4/ram.4:43 build/C/man4/random.4:282 build/C/man3/setlogmask.3:78 build/C/man4/sk98lin.4:598 build/C/man4/st.4:954 build/C/man2/syslog.2:309 build/C/man3/syslog.3:315 build/C/man4/ttyS.4:48 build/C/man7/uri.7:706 build/C/man4/vcs.4:173 build/C/man4/wavelan.4:138
655 #: build/C/man4/cciss.4:358
656 msgid "B<cciss_vol_status>(8), B<hpsa>(4), B<hpacucli>(8), B<hpacuxe>(8),"
660 #. Don Brace, Steve Cameron, Chase Maupin, Mike Miller, Michael Ni,
661 #. Charles White, Francis Wiran
662 #. and probably some other people.
664 #: build/C/man4/cciss.4:370
666 "E<.UR http://cciss.sf.net> E<.UE ,> and I<Documentation/blockdev/cciss.txt> "
667 "and I<Documentation/ABI/testing/sysfs-bus-pci-devices-cciss> in the Linux "
672 #: build/C/man4/cciss.4:370 build/C/man4/console.4:112 build/C/man4/console_codes.4:646 build/C/man4/console_ioctl.4:873 build/C/man5/core.5:434 build/C/man4/cpuid.4:96 build/C/man4/dsp56k.4:121 build/C/man4/fd.4:221 build/C/man7/fifo.7:74 build/C/man4/full.4:65 build/C/man3/gnu_get_libc_version.3:78 build/C/man4/hd.4:110 build/C/man4/hpsa.4:197 build/C/man4/initrd.4:484 build/C/man4/lp.4:141 build/C/man3/makedev.3:83 build/C/man4/mem.4:88 build/C/man3/mkfifo.3:206 build/C/man2/mknod.2:297 build/C/man4/mouse.4:187 build/C/man4/msr.4:59 build/C/man4/null.4:68 build/C/man7/pipe.7:244 build/C/man4/ram.4:47 build/C/man4/random.4:286 build/C/man4/sd.4:137 build/C/man3/setlogmask.3:82 build/C/man4/sk98lin.4:602 build/C/man4/st.4:964 build/C/man3/stdarg.3:338 build/C/man2/syslog.2:312 build/C/man3/syslog.3:320 build/C/man4/ttyS.4:55 build/C/man7/uri.7:715 build/C/man4/vcs.4:178 build/C/man4/wavelan.4:145
678 #: build/C/man4/cciss.4:377 build/C/man4/console.4:119 build/C/man4/console_codes.4:653 build/C/man4/console_ioctl.4:880 build/C/man5/core.5:441 build/C/man4/cpuid.4:103 build/C/man4/dsp56k.4:128 build/C/man4/fd.4:228 build/C/man7/fifo.7:81 build/C/man4/full.4:72 build/C/man3/gnu_get_libc_version.3:85 build/C/man4/hd.4:117 build/C/man4/hpsa.4:204 build/C/man4/initrd.4:491 build/C/man4/lp.4:148 build/C/man3/makedev.3:90 build/C/man4/mem.4:95 build/C/man3/mkfifo.3:213 build/C/man2/mknod.2:304 build/C/man4/mouse.4:194 build/C/man4/msr.4:66 build/C/man4/null.4:75 build/C/man7/pipe.7:251 build/C/man4/ram.4:54 build/C/man4/random.4:293 build/C/man4/sd.4:144 build/C/man3/setlogmask.3:89 build/C/man4/sk98lin.4:609 build/C/man4/st.4:971 build/C/man3/stdarg.3:345 build/C/man2/syslog.2:319 build/C/man3/syslog.3:327 build/C/man4/ttyS.4:62 build/C/man7/uri.7:722 build/C/man4/vcs.4:185 build/C/man4/wavelan.4:152
680 "This page is part of release 3.64 of the Linux I<man-pages> project. A "
681 "description of the project, and information about reporting bugs, can be "
682 "found at \\%http://www.kernel.org/doc/man-pages/."
686 #: build/C/man4/console.4:12
692 #: build/C/man4/console.4:12
698 #: build/C/man4/console.4:15
699 msgid "console - console terminal and virtual consoles"
703 #: build/C/man4/console.4:37
705 "A Linux system has up to 63 I<virtual consoles> (character devices with "
706 "major number 4 and minor number 1 to 63), usually called I</dev/ttyn> with 1 "
707 "\\(E<lt>= I<n> \\(E<lt>= 63. The current console is also addressed by "
708 "I</dev/console> or I</dev/tty0>, the character device with major number 4 "
709 "and minor number 0. The device files I</dev/*> are usually created using "
710 "the script MAKEDEV, or using B<mknod>(1), usually with mode 0622 and owner "
715 #: build/C/man4/console.4:45
717 "Before kernel version 1.1.54 the number of virtual consoles was compiled "
718 "into the kernel (in I<tty.h>: #define NR_CONSOLES 8) and could be changed "
719 "by editing and recompiling. Since version 1.1.54 virtual consoles are "
720 "created on the fly, as soon as they are needed."
724 #: build/C/man4/console.4:63
726 "Common ways to start a process on a console are: (a) tell B<init>(8) (in "
727 "B<inittab>(5)) to start a B<mingetty>(8) (or B<agetty>(8)) on the "
728 "console; (b) ask B<openvt>(1) to start a process on the console; (c) start "
729 "X\\(emit will find the first unused console, and display its output there. "
730 "(There is also the ancient B<doshell>(8).)"
734 #: build/C/man4/console.4:76
736 "Common ways to switch consoles are: (a) use Alt+FI<n> or Ctrl+Alt+FI<n> to "
737 "switch to console I<n>; AltGr+FI<n> might bring you to console I<n>+12 [here "
738 "Alt and AltGr refer to the left and right Alt keys, respectively]; (b) use "
739 "Alt+RightArrow or Alt+LeftArrow to cycle through the presently allocated "
740 "consoles; (c) use the program B<chvt>(1). (The key mapping is user "
741 "settable, see B<loadkeys>(1); the above mentioned key combinations are "
742 "according to the default settings.)"
746 #: build/C/man4/console.4:83
748 "The command B<deallocvt>(1) (formerly B<disalloc>) will free the memory "
749 "taken by the screen buffers for consoles that no longer have any associated "
754 #: build/C/man4/console.4:83
760 #: build/C/man4/console.4:91
762 "Consoles carry a lot of state. I hope to document that some other time. "
763 "The most important fact is that the consoles simulate vt100 terminals. In "
764 "particular, a console is reset to the initial state by printing the two "
765 "characters ESC c. All escape sequences can be found in B<console_codes>(4)."
769 #: build/C/man4/console.4:93
770 msgid "I</dev/console>"
774 #: build/C/man4/console.4:95
779 #: build/C/man4/console.4:112
781 "B<chvt>(1), B<deallocvt>(1), B<loadkeys>(1), B<mknod>(1), B<openvt>(1), "
782 "B<console_codes>(4), B<console_ioctl>(4), B<tty>(4), B<ttyS>(4), "
783 "B<charsets>(7), B<agetty>(8), B<init>(8), B<mapscrn>(8), B<mingetty>(8), "
784 "B<resizecons>(8), B<setfont>(8)"
788 #: build/C/man4/console_codes.4:23
790 msgid "CONSOLE_CODES"
794 #: build/C/man4/console_codes.4:26
795 msgid "console_codes - Linux console escape and control sequences"
799 #: build/C/man4/console_codes.4:33
801 "The Linux console implements a large subset of the VT102 and ECMA-48/ISO "
802 "6429/ANSI X3.64 terminal controls, plus certain private-mode sequences for "
803 "changing the color palette, character-set mapping, and so on. In the "
804 "tabular descriptions below, the second column gives ECMA-48 or DEC mnemonics "
805 "(the latter if prefixed with DEC) for the given function. Sequences without "
806 "a mnemonic are neither ECMA-48 nor VT102."
810 #: build/C/man4/console_codes.4:38
812 "After all the normal output processing has been done, and a stream of "
813 "characters arrives at the console driver for actual printing, the first "
814 "thing that happens is a translation from the code used for processing to the "
815 "code used for printing."
819 #: build/C/man4/console_codes.4:44
821 "If the console is in UTF-8 mode, then the incoming bytes are first assembled "
822 "into 16-bit Unicode codes. Otherwise each byte is transformed according to "
823 "the current mapping table (which translates it to a Unicode value). See the "
824 "B<Character Sets> section below for discussion."
828 #: build/C/man4/console_codes.4:50
830 "In the normal case, the Unicode value is converted to a font index, and this "
831 "is stored in video memory, so that the corresponding glyph (as found in "
832 "video ROM) appears on the screen. Note that the use of Unicode (and the "
833 "design of the PC hardware) allows us to use 512 different glyphs "
838 #: build/C/man4/console_codes.4:57
840 "If the current Unicode value is a control character, or we are currently "
841 "processing an escape sequence, the value will treated specially. Instead of "
842 "being turned into a font index and rendered as a glyph, it may trigger "
843 "cursor movement or other control functions. See the B<Linux Console "
844 "Controls> section below for discussion."
848 #: build/C/man4/console_codes.4:69
850 "It is generally not good practice to hard-wire terminal controls into "
851 "programs. Linux supports a B<terminfo>(5) database of terminal "
852 "capabilities. Rather than emitting console escape sequences by hand, you "
853 "will almost always want to use a terminfo-aware screen library or utility "
854 "such as B<ncurses>(3), B<tput>(1), or B<reset>(1)."
858 #: build/C/man4/console_codes.4:69
860 msgid "Linux console controls"
864 #: build/C/man4/console_codes.4:73
866 "This section describes all the control characters and escape sequences that "
867 "invoke special functions (i.e., anything other than writing a glyph at the "
868 "current cursor location) on the Linux console."
872 #: build/C/man4/console_codes.4:75
873 msgid "B<Control characters>"
877 #: build/C/man4/console_codes.4:86
879 "A character is a control character if (before transformation according to "
880 "the mapping table) it has one of the 14 codes 00 (NUL), 07 (BEL), 08 (BS), "
881 "09 (HT), 0a (LF), 0b (VT), 0c (FF), 0d (CR), 0e (SO), 0f (SI), 18 (CAN), 1a "
882 "(SUB), 1b (ESC), 7f (DEL). One can set a \"display control characters\" "
883 "mode (see below), and allow 07, 09, 0b, 18, 1a, 7f to be displayed as "
884 "glyphs. On the other hand, in UTF-8 mode all codes 00-1f are regarded as "
885 "control characters, regardless of any \"display control characters\" mode."
889 #: build/C/man4/console_codes.4:95
891 "If we have a control character, it is acted upon immediately and then "
892 "discarded (even in the middle of an escape sequence) and the escape "
893 "sequence continues with the next character. (However, ESC starts a new "
894 "escape sequence, possibly aborting a previous unfinished one, and CAN and "
895 "SUB abort any escape sequence.) The recognized control characters are BEL, "
896 "BS, HT, LF, VT, FF, CR, SO, SI, CAN, SUB, ESC, DEL, CSI. They do what one "
901 #: build/C/man4/console_codes.4:97
902 msgid "BEL (0x07, B<^G>) beeps;"
906 #: build/C/man4/console_codes.4:100
908 "BS (0x08, B<^H>) backspaces one column (but not past the beginning of the "
913 #: build/C/man4/console_codes.4:103
915 "HT (0x09, B<^I>) goes to the next tab stop or to the end of the line if "
916 "there is no earlier tab stop;"
920 #: build/C/man4/console_codes.4:107
922 "LF (0x0A, B<^J>), VT (0x0B, B<^K>) and FF (0x0C, B<^L>) all give a linefeed, "
923 "and if LF/NL (new-line mode) is set also a carriage return;"
927 #: build/C/man4/console_codes.4:109
928 msgid "CR (0x0D, B<^M>) gives a carriage return;"
932 #: build/C/man4/console_codes.4:111
933 msgid "SO (0x0E, B<^N>) activates the G1 character set;"
937 #: build/C/man4/console_codes.4:113
938 msgid "SI (0x0F, B<^O>) activates the G0 character set;"
942 #: build/C/man4/console_codes.4:115
943 msgid "CAN (0x18, B<^X>) and SUB (0x1A, B<^Z>) interrupt escape sequences;"
947 #: build/C/man4/console_codes.4:117
948 msgid "ESC (0x1B, B<^[>) starts an escape sequence;"
952 #: build/C/man4/console_codes.4:119
953 msgid "DEL (0x7F) is ignored;"
957 #: build/C/man4/console_codes.4:121
958 msgid "CSI (0x9B) is equivalent to ESC [."
962 #: build/C/man4/console_codes.4:123
963 msgid "B<ESC- but not CSI-sequences>"
967 #: build/C/man4/console_codes.4:125
969 msgid "ESC c\tRIS\tReset.\n"
973 #: build/C/man4/console_codes.4:126
975 msgid "ESC D\tIND\tLinefeed.\n"
979 #: build/C/man4/console_codes.4:127
981 msgid "ESC E\tNEL\tNewline.\n"
985 #: build/C/man4/console_codes.4:128
987 msgid "ESC H\tHTS\tSet tab stop at current column.\n"
991 #: build/C/man4/console_codes.4:129
993 msgid "ESC M\tRI\tReverse linefeed.\n"
997 #: build/C/man4/console_codes.4:130
999 msgid "ESC Z\tDECID\tT{\n"
1003 #: build/C/man4/console_codes.4:131
1005 msgid "DEC private identification. The kernel\n"
1009 #: build/C/man4/console_codes.4:132
1011 msgid "returns the string ESC [ ? 6 c, claiming\n"
1015 #: build/C/man4/console_codes.4:133
1017 msgid "that it is a VT102.\n"
1021 #: build/C/man4/console_codes.4:134 build/C/man4/console_codes.4:138 build/C/man4/console_codes.4:163 build/C/man4/console_codes.4:243 build/C/man4/console_codes.4:249 build/C/man4/console_codes.4:253 build/C/man4/console_codes.4:260
1027 #: build/C/man4/console_codes.4:135
1029 msgid "ESC 7\tDECSC\tT{\n"
1033 #: build/C/man4/console_codes.4:136
1035 msgid "Save current state (cursor coordinates,\n"
1039 #: build/C/man4/console_codes.4:137
1041 msgid "attributes, character sets pointed at by G0, G1).\n"
1045 #: build/C/man4/console_codes.4:139
1047 msgid "ESC 8\tDECRC\tRestore state most recently saved by ESC 7.\n"
1051 #: build/C/man4/console_codes.4:140
1053 msgid "ESC [\tCSI\tControl sequence introducer\n"
1057 #: build/C/man4/console_codes.4:141
1059 msgid "ESC %\t\tStart sequence selecting character set\n"
1063 #: build/C/man4/console_codes.4:142
1065 msgid "ESC % @\t\t\\0\\0\\0Select default (ISO 646 / ISO 8859-1)\n"
1069 #: build/C/man4/console_codes.4:143
1071 msgid "ESC % G\t\t\\0\\0\\0Select UTF-8\n"
1075 #: build/C/man4/console_codes.4:144
1077 msgid "ESC % 8\t\t\\0\\0\\0Select UTF-8 (obsolete)\n"
1081 #: build/C/man4/console_codes.4:145
1083 msgid "ESC # 8\tDECALN\tDEC screen alignment test - fill screen with E's.\n"
1087 #: build/C/man4/console_codes.4:146
1089 msgid "ESC (\t\tStart sequence defining G0 character set\n"
1093 #: build/C/man4/console_codes.4:147
1095 msgid "ESC ( B\t\t\\0\\0\\0Select default (ISO 8859-1 mapping)\n"
1099 #: build/C/man4/console_codes.4:148
1101 msgid "ESC ( 0\t\t\\0\\0\\0Select VT100 graphics mapping\n"
1105 #: build/C/man4/console_codes.4:149
1107 msgid "ESC ( U\t\t\\0\\0\\0Select null mapping - straight to character ROM\n"
1111 #: build/C/man4/console_codes.4:150
1113 msgid "ESC ( K\t\t\\0\\0\\0Select user mapping - the map that is loaded by\n"
1117 #: build/C/man4/console_codes.4:151
1119 msgid "\t\t\\0\\0\\0the utility B<mapscrn>(8).\n"
1123 #: build/C/man4/console_codes.4:152
1125 msgid "ESC )\t\tStart sequence defining G1\n"
1129 #: build/C/man4/console_codes.4:153
1131 msgid "\t\t(followed by one of B, 0, U, K, as above).\n"
1135 #: build/C/man4/console_codes.4:154
1137 msgid "ESC E<gt>\tDECPNM\tSet numeric keypad mode\n"
1141 #: build/C/man4/console_codes.4:155
1143 msgid "ESC =\tDECPAM\tSet application keypad mode\n"
1147 #: build/C/man4/console_codes.4:156
1149 msgid "ESC ]\tOSC\tT{\n"
1153 #: build/C/man4/console_codes.4:157
1155 msgid "(Should be: Operating system command)\n"
1159 #: build/C/man4/console_codes.4:158
1161 msgid "ESC ] P I<nrrggbb>: set palette, with parameter\n"
1165 #: build/C/man4/console_codes.4:159
1167 msgid "given in 7 hexadecimal digits after the final P :-(.\n"
1171 #: build/C/man4/console_codes.4:160
1173 msgid "Here I<n> is the color (0-15), and I<rrggbb> indicates\n"
1177 #: build/C/man4/console_codes.4:161
1179 msgid "the red/green/blue values (0-255).\n"
1183 #: build/C/man4/console_codes.4:162
1185 msgid "ESC ] R: reset palette\n"
1189 #: build/C/man4/console_codes.4:167
1190 msgid "B<ECMA-48 CSI sequences>"
1194 #: build/C/man4/console_codes.4:173
1196 "CSI (or ESC [) is followed by a sequence of parameters, at most NPAR (16), "
1197 "that are decimal numbers separated by semicolons. An empty or absent "
1198 "parameter is taken to be 0. The sequence of parameters may be preceded by a "
1199 "single question mark."
1203 #: build/C/man4/console_codes.4:177
1205 "However, after CSI [ (or ESC [ [) a single character is read and this entire "
1206 "sequence is ignored. (The idea is to ignore an echoed function key.)"
1210 #: build/C/man4/console_codes.4:179
1211 msgid "The action of a CSI sequence is determined by its final character."
1215 #: build/C/man4/console_codes.4:181
1217 msgid "@\tICH\tInsert the indicated # of blank characters.\n"
1221 #: build/C/man4/console_codes.4:182
1223 msgid "A\tCUU\tMove cursor up the indicated # of rows.\n"
1227 #: build/C/man4/console_codes.4:183
1229 msgid "B\tCUD\tMove cursor down the indicated # of rows.\n"
1233 #: build/C/man4/console_codes.4:184
1235 msgid "C\tCUF\tMove cursor right the indicated # of columns.\n"
1239 #: build/C/man4/console_codes.4:185
1241 msgid "D\tCUB\tMove cursor left the indicated # of columns.\n"
1245 #: build/C/man4/console_codes.4:186
1247 msgid "E\tCNL\tMove cursor down the indicated # of rows, to column 1.\n"
1251 #: build/C/man4/console_codes.4:187
1253 msgid "F\tCPL\tMove cursor up the indicated # of rows, to column 1.\n"
1257 #: build/C/man4/console_codes.4:188
1259 msgid "G\tCHA\tMove cursor to indicated column in current row.\n"
1263 #: build/C/man4/console_codes.4:189
1265 msgid "H\tCUP\tMove cursor to the indicated row, column (origin at 1,1).\n"
1269 #: build/C/man4/console_codes.4:190
1271 msgid "J\tED\tErase display (default: from cursor to end of display).\n"
1275 #: build/C/man4/console_codes.4:191
1277 msgid "\t\tESC [ 1 J: erase from start to cursor.\n"
1281 #: build/C/man4/console_codes.4:192
1283 msgid "\t\tESC [ 2 J: erase whole display.\n"
1287 #: build/C/man4/console_codes.4:193
1289 msgid "\t\tESC [ 3 J: erase whole display including scroll-back\n"
1293 #: build/C/man4/console_codes.4:194
1295 msgid "\t\t buffer (since Linux 3.0).\n"
1298 #. ESC [ 3 J: commit f8df13e0a901fe55631fed66562369b4dba40f8b
1300 #: build/C/man4/console_codes.4:196
1302 msgid "K\tEL\tErase line (default: from cursor to end of line).\n"
1306 #: build/C/man4/console_codes.4:197
1308 msgid "\t\tESC [ 1 K: erase from start of line to cursor.\n"
1312 #: build/C/man4/console_codes.4:198
1314 msgid "\t\tESC [ 2 K: erase whole line.\n"
1318 #: build/C/man4/console_codes.4:199
1320 msgid "L\tIL\tInsert the indicated # of blank lines.\n"
1324 #: build/C/man4/console_codes.4:200
1326 msgid "M\tDL\tDelete the indicated # of lines.\n"
1330 #: build/C/man4/console_codes.4:201
1332 msgid "P\tDCH\tDelete the indicated # of characters on current line.\n"
1336 #: build/C/man4/console_codes.4:202
1338 msgid "X\tECH\tErase the indicated # of characters on current line.\n"
1342 #: build/C/man4/console_codes.4:203
1344 msgid "a\tHPR\tMove cursor right the indicated # of columns.\n"
1348 #: build/C/man4/console_codes.4:204
1350 msgid "c\tDA\tAnswer ESC [ ? 6 c: \"I am a VT102\".\n"
1354 #: build/C/man4/console_codes.4:205
1356 msgid "d\tVPA\tMove cursor to the indicated row, current column.\n"
1360 #: build/C/man4/console_codes.4:206
1362 msgid "e\tVPR\tMove cursor down the indicated # of rows.\n"
1366 #: build/C/man4/console_codes.4:207
1368 msgid "f\tHVP\tMove cursor to the indicated row, column.\n"
1372 #: build/C/man4/console_codes.4:208
1374 msgid "g\tTBC\tWithout parameter: clear tab stop at current position.\n"
1378 #: build/C/man4/console_codes.4:209
1380 msgid "\t\tESC [ 3 g: delete all tab stops.\n"
1384 #: build/C/man4/console_codes.4:210
1386 msgid "h\tSM\tSet Mode (see below).\n"
1390 #: build/C/man4/console_codes.4:211
1392 msgid "l\tRM\tReset Mode (see below).\n"
1396 #: build/C/man4/console_codes.4:212
1398 msgid "m\tSGR\tSet attributes (see below).\n"
1402 #: build/C/man4/console_codes.4:213
1404 msgid "n\tDSR\tStatus report (see below).\n"
1408 #: build/C/man4/console_codes.4:214
1410 msgid "q\tDECLL\tSet keyboard LEDs.\n"
1414 #: build/C/man4/console_codes.4:215
1416 msgid "\t\tESC [ 0 q: clear all LEDs\n"
1420 #: build/C/man4/console_codes.4:216
1422 msgid "\t\tESC [ 1 q: set Scroll Lock LED\n"
1426 #: build/C/man4/console_codes.4:217
1428 msgid "\t\tESC [ 2 q: set Num Lock LED\n"
1432 #: build/C/man4/console_codes.4:218
1434 msgid "\t\tESC [ 3 q: set Caps Lock LED\n"
1438 #: build/C/man4/console_codes.4:219
1440 msgid "r\tDECSTBM\tSet scrolling region; parameters are top and bottom row.\n"
1444 #: build/C/man4/console_codes.4:220
1446 msgid "s\t?\tSave cursor location.\n"
1450 #: build/C/man4/console_codes.4:221
1452 msgid "u\t?\tRestore cursor location.\n"
1456 #: build/C/man4/console_codes.4:222
1458 msgid "\\`\tHPA\tMove cursor to indicated column in current row.\n"
1462 #: build/C/man4/console_codes.4:226
1463 msgid "B<ECMA-48 Set Graphics Rendition>"
1467 #: build/C/man4/console_codes.4:233
1469 "The ECMA-48 SGR sequence ESC [ I<parameters> m sets display attributes. "
1470 "Several attributes can be set in the same sequence, separated by "
1471 "semicolons. An empty parameter (between semicolons or string initiator or "
1472 "terminator) is interpreted as a zero."
1476 #: build/C/man4/console_codes.4:235
1478 msgid "param\tresult\n"
1482 #: build/C/man4/console_codes.4:236
1484 msgid "0\treset all attributes to their defaults\n"
1488 #: build/C/man4/console_codes.4:237
1490 msgid "1\tset bold\n"
1494 #: build/C/man4/console_codes.4:238
1496 msgid "2\tset half-bright (simulated with color on a color display)\n"
1500 #: build/C/man4/console_codes.4:239
1506 #: build/C/man4/console_codes.4:240
1508 msgid "set underscore (simulated with color on a color display)\n"
1512 #: build/C/man4/console_codes.4:241
1514 msgid "(the colors used to simulate dim or underline are set\n"
1518 #: build/C/man4/console_codes.4:242
1520 msgid "using ESC ] ...)\n"
1524 #: build/C/man4/console_codes.4:244
1526 msgid "5\tset blink\n"
1530 #: build/C/man4/console_codes.4:245
1532 msgid "7\tset reverse video\n"
1536 #: build/C/man4/console_codes.4:246
1542 #: build/C/man4/console_codes.4:247
1544 msgid "reset selected mapping, display control flag,\n"
1548 #: build/C/man4/console_codes.4:248
1550 msgid "and toggle meta flag (ECMA-48 says \"primary font\").\n"
1554 #: build/C/man4/console_codes.4:250
1560 #: build/C/man4/console_codes.4:251 build/C/man4/console_codes.4:255
1562 msgid "select null mapping, set display control flag,\n"
1566 #: build/C/man4/console_codes.4:252
1568 msgid "reset toggle meta flag (ECMA-48 says \"first alternate font\").\n"
1572 #: build/C/man4/console_codes.4:254
1578 #: build/C/man4/console_codes.4:256
1580 msgid "set toggle meta flag (ECMA-48 says \"second alternate font\").\n"
1584 #: build/C/man4/console_codes.4:257
1586 msgid "The toggle meta flag\n"
1590 #: build/C/man4/console_codes.4:258
1592 msgid "causes the high bit of a byte to be toggled\n"
1596 #: build/C/man4/console_codes.4:259
1598 msgid "before the mapping table translation is done.\n"
1602 #: build/C/man4/console_codes.4:261
1604 msgid "21\tset normal intensity (ECMA-48 says \"doubly underlined\")\n"
1608 #: build/C/man4/console_codes.4:262
1610 msgid "22\tset normal intensity\n"
1614 #: build/C/man4/console_codes.4:263
1616 msgid "24\tunderline off\n"
1620 #: build/C/man4/console_codes.4:264
1622 msgid "25\tblink off\n"
1626 #: build/C/man4/console_codes.4:265
1628 msgid "27\treverse video off\n"
1632 #: build/C/man4/console_codes.4:266
1634 msgid "30\tset black foreground\n"
1638 #: build/C/man4/console_codes.4:267
1640 msgid "31\tset red foreground\n"
1644 #: build/C/man4/console_codes.4:268
1646 msgid "32\tset green foreground\n"
1650 #: build/C/man4/console_codes.4:269
1652 msgid "33\tset brown foreground\n"
1656 #: build/C/man4/console_codes.4:270
1658 msgid "34\tset blue foreground\n"
1662 #: build/C/man4/console_codes.4:271
1664 msgid "35\tset magenta foreground\n"
1668 #: build/C/man4/console_codes.4:272
1670 msgid "36\tset cyan foreground\n"
1674 #: build/C/man4/console_codes.4:273
1676 msgid "37\tset white foreground\n"
1680 #: build/C/man4/console_codes.4:274
1682 msgid "38\tset underscore on, set default foreground color\n"
1686 #: build/C/man4/console_codes.4:275
1688 msgid "39\tset underscore off, set default foreground color\n"
1692 #: build/C/man4/console_codes.4:276
1694 msgid "40\tset black background\n"
1698 #: build/C/man4/console_codes.4:277
1700 msgid "41\tset red background\n"
1704 #: build/C/man4/console_codes.4:278
1706 msgid "42\tset green background\n"
1710 #: build/C/man4/console_codes.4:279
1712 msgid "43\tset brown background\n"
1716 #: build/C/man4/console_codes.4:280
1718 msgid "44\tset blue background\n"
1722 #: build/C/man4/console_codes.4:281
1724 msgid "45\tset magenta background\n"
1728 #: build/C/man4/console_codes.4:282
1730 msgid "46\tset cyan background\n"
1734 #: build/C/man4/console_codes.4:283
1736 msgid "47\tset white background\n"
1740 #: build/C/man4/console_codes.4:284
1742 msgid "49\tset default background color\n"
1746 #: build/C/man4/console_codes.4:288
1747 msgid "B<ECMA-48 Mode Switches>"
1751 #: build/C/man4/console_codes.4:288
1757 #: build/C/man4/console_codes.4:291
1758 msgid "DECCRM (default off): Display control chars."
1762 #: build/C/man4/console_codes.4:291
1768 #: build/C/man4/console_codes.4:294
1769 msgid "DECIM (default off): Set insert mode."
1773 #: build/C/man4/console_codes.4:294
1779 #: build/C/man4/console_codes.4:298
1780 msgid "LF/NL (default off): Automatically follow echo of LF, VT or FF with CR."
1784 #: build/C/man4/console_codes.4:301
1785 msgid "B<ECMA-48 Status Report Commands>"
1789 #: build/C/man4/console_codes.4:301
1795 #: build/C/man4/console_codes.4:304
1796 msgid "Device status report (DSR): Answer is ESC [ 0 n (Terminal OK)."
1800 #: build/C/man4/console_codes.4:304
1806 #: build/C/man4/console_codes.4:309
1808 "Cursor position report (CPR): Answer is ESC [ I<y> ; I<x> R, where I<x,y> is "
1809 "the cursor location."
1813 #: build/C/man4/console_codes.4:311
1814 msgid "B<DEC Private Mode (DECSET/DECRST) sequences>"
1818 #: build/C/man4/console_codes.4:317
1820 "These are not described in ECMA-48. We list the Set Mode sequences; the "
1821 "Reset Mode sequences are obtained by replacing the final \\(aqh\\(aq by "
1826 #: build/C/man4/console_codes.4:317
1832 #: build/C/man4/console_codes.4:321
1834 "DECCKM (default off): When set, the cursor keys send an ESC O prefix, rather "
1839 #: build/C/man4/console_codes.4:321
1845 #: build/C/man4/console_codes.4:328
1847 "DECCOLM (default off = 80 columns): 80/132 col mode switch. The driver "
1848 "sources note that this alone does not suffice; some user-mode utility such "
1849 "as B<resizecons>(8) has to change the hardware registers on the console "
1854 #: build/C/man4/console_codes.4:328
1860 #: build/C/man4/console_codes.4:331
1861 msgid "DECSCNM (default off): Set reverse-video mode."
1865 #: build/C/man4/console_codes.4:331
1871 #: build/C/man4/console_codes.4:335
1873 "DECOM (default off): When set, cursor addressing is relative to the upper "
1874 "left corner of the scrolling region."
1878 #: build/C/man4/console_codes.4:335
1884 #: build/C/man4/console_codes.4:341
1886 "DECAWM (default on): Set autowrap on. In this mode, a graphic character "
1887 "emitted after column 80 (or column 132 of DECCOLM is on) forces a wrap to "
1888 "the beginning of the following line first."
1892 #: build/C/man4/console_codes.4:341
1898 #: build/C/man4/console_codes.4:344
1899 msgid "DECARM (default on): Set keyboard autorepeat on."
1903 #: build/C/man4/console_codes.4:344
1909 #: build/C/man4/console_codes.4:348
1911 "X10 Mouse Reporting (default off): Set reporting mode to 1 (or reset to "
1916 #: build/C/man4/console_codes.4:348
1918 msgid "ESC [ ? 25 h"
1922 #: build/C/man4/console_codes.4:351
1923 msgid "DECTECM (default on): Make cursor visible."
1927 #: build/C/man4/console_codes.4:351
1929 msgid "ESC [ ? 1000 h"
1933 #: build/C/man4/console_codes.4:356
1935 "X11 Mouse Reporting (default off): Set reporting mode to 2 (or reset to "
1940 #: build/C/man4/console_codes.4:358
1941 msgid "B<Linux Console Private CSI Sequences>"
1945 #: build/C/man4/console_codes.4:365
1947 "The following sequences are neither ECMA-48 nor native VT102. They are "
1948 "native to the Linux console driver. Colors are in SGR parameters: 0 = "
1949 "black, 1 = red, 2 = green, 3 = brown, 4 = blue, 5 = magenta, 6 = cyan, 7 = "
1954 #: build/C/man4/console_codes.4:367
1956 msgid "ESC [ 1 ; I<n> ]\tSet color I<n> as the underline color\n"
1960 #: build/C/man4/console_codes.4:368
1962 msgid "ESC [ 2 ; I<n> ]\tSet color I<n> as the dim color\n"
1966 #: build/C/man4/console_codes.4:369
1968 msgid "ESC [ 8 ] \tMake the current color pair the default attributes.\n"
1972 #: build/C/man4/console_codes.4:370
1974 msgid "ESC [ 9 ; I<n> ]\tSet screen blank timeout to I<n> minutes.\n"
1978 #: build/C/man4/console_codes.4:371
1980 msgid "ESC [ 10 ; I<n> ]\tSet bell frequency in Hz.\n"
1984 #: build/C/man4/console_codes.4:372
1986 msgid "ESC [ 11 ; I<n> ]\tSet bell duration in msec.\n"
1990 #: build/C/man4/console_codes.4:373
1992 msgid "ESC [ 12 ; I<n> ]\tBring specified console to the front.\n"
1996 #: build/C/man4/console_codes.4:374
1998 msgid "ESC [ 13 ] \tUnblank the screen.\n"
2002 #: build/C/man4/console_codes.4:375
2004 msgid "ESC [ 14 ; I<n> ] \tSet the VESA powerdown interval in minutes.\n"
2008 #: build/C/man4/console_codes.4:377
2010 msgid "Character sets"
2014 #: build/C/man4/console_codes.4:382
2016 "The kernel knows about 4 translations of bytes into console-screen symbols. "
2017 "The four tables are: a) Latin1 -E<gt> PC, b) VT100 graphics -E<gt> PC, c) PC "
2018 "-E<gt> PC, d) user-defined."
2022 #: build/C/man4/console_codes.4:388
2024 "There are two character sets, called G0 and G1, and one of them is the "
2025 "current character set. (Initially G0.) Typing B<^N> causes G1 to become "
2026 "current, B<^O> causes G0 to become current."
2030 #: build/C/man4/console_codes.4:396
2032 "These variables G0 and G1 point at a translation table, and can be changed "
2033 "by the user. Initially they point at tables a) and b), respectively. The "
2034 "sequences ESC ( B and ESC ( 0 and ESC ( U and ESC ( K cause G0 to point at "
2035 "translation table a), b), c) and d), respectively. The sequences ESC ) B "
2036 "and ESC ) 0 and ESC ) U and ESC ) K cause G1 to point at translation table "
2037 "a), b), c) and d), respectively."
2041 #: build/C/man4/console_codes.4:406
2043 "The sequence ESC c causes a terminal reset, which is what you want if the "
2044 "screen is all garbled. The oft-advised \"echo ^V^O\" will make only G0 "
2045 "current, but there is no guarantee that G0 points at table a). In some "
2046 "distributions there is a program B<reset>(1) that just does \"echo ^[c\". "
2047 "If your terminfo entry for the console is correct (and has an entry "
2048 "rs1=\\eEc), then \"tput reset\" will also work."
2052 #: build/C/man4/console_codes.4:414
2054 "The user-defined mapping table can be set using B<mapscrn>(8). The result "
2055 "of the mapping is that if a symbol c is printed, the symbol s = map[c] is "
2056 "sent to the video memory. The bitmap that corresponds to s is found in the "
2057 "character ROM, and can be changed using B<setfont>(8)."
2061 #: build/C/man4/console_codes.4:414
2063 msgid "Mouse tracking"
2067 #: build/C/man4/console_codes.4:426
2069 "The mouse tracking facility is intended to return B<xterm>(1)-compatible "
2070 "mouse status reports. Because the console driver has no way to know the "
2071 "device or type of the mouse, these reports are returned in the console input "
2072 "stream only when the virtual terminal driver receives a mouse update ioctl. "
2073 "These ioctls must be generated by a mouse-aware user-mode application such "
2074 "as the B<gpm>(8) daemon."
2078 #: build/C/man4/console_codes.4:432
2080 "The mouse tracking escape sequences generated by B<xterm>(1) encode numeric "
2081 "parameters in a single character as I<value>+040. For example, \\(aq!\\(aq "
2082 "is 1. The screen coordinate system is 1-based."
2086 #: build/C/man4/console_codes.4:442
2088 "The X10 compatibility mode sends an escape sequence on button press encoding "
2089 "the location and the mouse button pressed. It is enabled by sending ESC [ ? "
2090 "9 h and disabled with ESC [ ? 9 l. On button press, B<xterm>(1) sends ESC [ "
2091 "M I<bxy> (6 characters). Here I<b> is button-1, and I<x> and I<y> are the x "
2092 "and y coordinates of the mouse when the button was pressed. This is the "
2093 "same code the kernel also produces."
2097 #: build/C/man4/console_codes.4:457
2099 "Normal tracking mode (not implemented in Linux 2.0.24) sends an escape "
2100 "sequence on both button press and release. Modifier information is also "
2101 "sent. It is enabled by sending ESC [ ? 1000 h and disabled with ESC [ ? "
2102 "1000 l. On button press or release, B<xterm>(1) sends ESC [ M I<bxy>. The "
2103 "low two bits of I<b> encode button information: 0=MB1 pressed, 1=MB2 "
2104 "pressed, 2=MB3 pressed, 3=release. The upper bits encode what modifiers "
2105 "were down when the button was pressed and are added together: 4=Shift, "
2106 "8=Meta, 16=Control. Again I<x> and I<y> are the x and y coordinates of the "
2107 "mouse event. The upper left corner is (1,1)."
2111 #: build/C/man4/console_codes.4:457
2113 msgid "Comparisons with other terminals"
2117 #: build/C/man4/console_codes.4:464
2119 "Many different terminal types are described, like the Linux console, as "
2120 "being \"VT100-compatible\". Here we discuss differences between the Linux "
2121 "console and the two most important others, the DEC VT102 and B<xterm>(1)."
2125 #: build/C/man4/console_codes.4:466
2126 msgid "B<Control-character handling>"
2130 #: build/C/man4/console_codes.4:468
2131 msgid "The VT102 also recognized the following control characters:"
2135 #: build/C/man4/console_codes.4:470
2136 msgid "NUL (0x00) was ignored;"
2140 #: build/C/man4/console_codes.4:472
2141 msgid "ENQ (0x05) triggered an answerback message;"
2145 #: build/C/man4/console_codes.4:474
2146 msgid "DC1 (0x11, B<^Q>, XON) resumed transmission;"
2150 #: build/C/man4/console_codes.4:477
2152 "DC3 (0x13, B<^S>, XOFF) caused VT100 to ignore (and stop transmitting) all "
2153 "codes except XOFF and XON."
2157 #: build/C/man4/console_codes.4:479
2158 msgid "VT100-like DC1/DC3 processing may be enabled by the terminal driver."
2162 #: build/C/man4/console_codes.4:485
2164 "The B<xterm>(1) program (in VT100 mode) recognizes the control characters "
2165 "BEL, BS, HT, LF, VT, FF, CR, SO, SI, ESC."
2169 #: build/C/man4/console_codes.4:487
2170 msgid "B<Escape sequences>"
2174 #: build/C/man4/console_codes.4:489
2175 msgid "VT100 console sequences not implemented on the Linux console:"
2179 #: build/C/man4/console_codes.4:491
2181 msgid "ESC N\tSS2\tSingle shift 2. (Select G2 character set for the next\n"
2185 #: build/C/man4/console_codes.4:492 build/C/man4/console_codes.4:494
2187 msgid "\t\tcharacter only.)\n"
2191 #: build/C/man4/console_codes.4:493
2193 msgid "ESC O\tSS3\tSingle shift 3. (Select G3 character set for the next\n"
2197 #: build/C/man4/console_codes.4:495
2199 msgid "ESC P\tDCS\tDevice control string (ended by ESC \\e)\n"
2203 #: build/C/man4/console_codes.4:496
2205 msgid "ESC X\tSOS\tStart of string.\n"
2209 #: build/C/man4/console_codes.4:497
2211 msgid "ESC ^\tPM\tPrivacy message (ended by ESC \\e)\n"
2215 #: build/C/man4/console_codes.4:498
2217 msgid "ESC \\e\tST\tString terminator\n"
2221 #: build/C/man4/console_codes.4:499
2223 msgid "ESC * ...\t\tDesignate G2 character set\n"
2227 #: build/C/man4/console_codes.4:500
2229 msgid "ESC + ...\t\tDesignate G3 character set\n"
2233 #: build/C/man4/console_codes.4:513
2235 "The program B<xterm>(1) (in VT100 mode) recognizes ESC c, ESC # 8, ESC "
2236 "E<gt>, ESC =, ESC D, ESC E, ESC H, ESC M, ESC N, ESC O, ESC P ... ESC \\e, "
2237 "ESC Z (it answers ESC [ ? 1 ; 2 c, \"I am a VT100 with advanced video "
2238 "option\") and ESC ^ ... ESC \\e with the same meanings as indicated above. "
2239 "It accepts ESC (, ESC ), ESC *, ESC + followed by 0, A, B for the DEC "
2240 "special character and line drawing set, UK, and US-ASCII, respectively."
2244 #: build/C/man4/console_codes.4:517
2246 "The user can configure B<xterm>(1) to respond to VT220-specific control "
2247 "sequences, and it will identify itself as a VT52, VT100, and up depending on "
2248 "the way it is configured and initialized."
2252 #: build/C/man4/console_codes.4:522
2254 "It accepts ESC ] (OSC) for the setting of certain resources. In addition to "
2255 "the ECMA-48 string terminator (ST), B<xterm>(1) accepts a BEL to terminate "
2256 "an OSC string. These are a few of the OSC control sequences recognized by "
2261 #: build/C/man4/console_codes.4:524
2263 msgid "ESC ] 0 ; I<txt> ST\tSet icon name and window title to I<txt>.\n"
2267 #: build/C/man4/console_codes.4:525
2269 msgid "ESC ] 1 ; I<txt> ST\tSet icon name to I<txt>.\n"
2273 #: build/C/man4/console_codes.4:526
2275 msgid "ESC ] 2 ; I<txt> ST\tSet window title to I<txt>.\n"
2279 #: build/C/man4/console_codes.4:527
2281 msgid "ESC ] 4 ; I<num>; I<txt> ST\tSet ANSI color I<num> to I<txt>.\n"
2285 #: build/C/man4/console_codes.4:528
2287 msgid "ESC ] 10 ; I<txt> ST\tSet dynamic text color to I<txt>.\n"
2291 #: build/C/man4/console_codes.4:529
2293 msgid "ESC ] 4 6 ; I<name> ST\tChange log file to I<name> (normally disabled\n"
2297 #: build/C/man4/console_codes.4:530
2299 msgid "\tby a compile-time option)\n"
2303 #: build/C/man4/console_codes.4:531
2305 msgid "ESC ] 5 0 ; I<fn> ST\tSet font to I<fn>.\n"
2309 #: build/C/man4/console_codes.4:536
2311 "It recognizes the following with slightly modified meaning (saving more "
2312 "state, behaving closer to VT100/VT220):"
2316 #: build/C/man4/console_codes.4:538
2318 msgid "ESC 7 DECSC\tSave cursor\n"
2322 #: build/C/man4/console_codes.4:539
2324 msgid "ESC 8 DECRC\tRestore cursor\n"
2328 #: build/C/man4/console_codes.4:543
2329 msgid "It also recognizes"
2333 #: build/C/man4/console_codes.4:545
2335 msgid "ESC F\t\tCursor to lower left corner of screen (if enabled by\n"
2339 #: build/C/man4/console_codes.4:546
2341 msgid "\t\tB<xterm>(1)'s B<hpLowerleftBugCompat> resource)\n"
2345 #: build/C/man4/console_codes.4:547
2347 msgid "ESC l\t\tMemory lock (per HP terminals).\n"
2351 #: build/C/man4/console_codes.4:548
2353 msgid "\t\tLocks memory above the cursor.\n"
2357 #: build/C/man4/console_codes.4:549
2359 msgid "ESC m\t\tMemory unlock (per HP terminals).\n"
2363 #: build/C/man4/console_codes.4:550
2365 msgid "ESC n\tLS2\tInvoke the G2 character set.\n"
2369 #: build/C/man4/console_codes.4:551
2371 msgid "ESC o\tLS3\tInvoke the G3 character set.\n"
2375 #: build/C/man4/console_codes.4:552
2377 msgid "ESC |\tLS3R\tInvoke the G3 character set as GR.\n"
2381 #: build/C/man4/console_codes.4:553
2383 msgid "ESC }\tLS2R\tInvoke the G2 character set as GR.\n"
2387 #: build/C/man4/console_codes.4:554
2389 msgid "ESC ~\tLS1R\tInvoke the G1 character set as GR.\n"
2393 #: build/C/man4/console_codes.4:560
2395 "It also recognizes ESC % and provides a more complete UTF-8 implementation "
2396 "than Linux console."
2400 #: build/C/man4/console_codes.4:562
2401 msgid "B<CSI Sequences>"
2405 #: build/C/man4/console_codes.4:576
2407 "Old versions of B<xterm>(1), for example, from X11R5, interpret the blink "
2408 "SGR as a bold SGR. Later versions which implemented ANSI colors, for "
2409 "example, XFree86 3.1.2A in 1995, improved this by allowing the blink "
2410 "attribute to be displayed as a color. Modern versions of xterm implement "
2411 "blink SGR as blinking text and still allow colored text as an alternate "
2412 "rendering of SGRs. Stock X11R6 versions did not recognize the color-setting "
2413 "SGRs until the X11R6.8 release, which incorporated XFree86 xterm. All "
2414 "ECMA-48 CSI sequences recognized by Linux are also recognized by I<xterm>, "
2415 "however B<xterm>(1) implements several ECMA-48 and DEC control sequences not "
2416 "recognized by Linux."
2420 #: build/C/man4/console_codes.4:590
2422 "The B<xterm>(1) program recognizes all of the DEC Private Mode sequences "
2423 "listed above, but none of the Linux private-mode sequences. For discussion "
2424 "of B<xterm>(1)'s own private-mode sequences, refer to the I<Xterm Control "
2425 "Sequences> document by Edward Moy, Stephen Gildea, and Thomas E. Dickey "
2426 "available with the X distribution. That document, though terse, is much "
2427 "longer than this manual page. For a chronological overview,"
2431 #: build/C/man4/console_codes.4:594
2432 msgid "E<.UR http://invisible-island.net\\:/xterm\\:/xterm.log.html> E<.UE>"
2436 #: build/C/man4/console_codes.4:597
2437 msgid "details changes to xterm."
2441 #: build/C/man4/console_codes.4:599
2442 msgid "The I<vttest> program"
2446 #: build/C/man4/console_codes.4:603
2447 msgid "E<.UR http://invisible-island.net\\:/vttest/> E<.UE>"
2451 #: build/C/man4/console_codes.4:608
2453 "demonstrates many of these control sequences. The B<xterm>(1) source "
2454 "distribution also contains sample scripts which exercise other features."
2458 #: build/C/man4/console_codes.4:608 build/C/man4/console_ioctl.4:824 build/C/man5/core.5:311 build/C/man4/cpuid.4:62 build/C/man4/fd.4:196 build/C/man7/fifo.7:54 build/C/man4/initrd.4:429 build/C/man3/makedev.3:71 build/C/man2/mknod.2:253 build/C/man4/msr.4:47 build/C/man4/null.4:61 build/C/man4/st.4:891 build/C/man3/stdarg.3:248 build/C/man2/syslog.2:301 build/C/man3/syslog.3:296 build/C/man7/uri.7:592
2464 #: build/C/man4/console_codes.4:611
2465 msgid "ESC 8 (DECRC) is not able to restore the character set changed with ESC %."
2469 #: build/C/man4/console_codes.4:611 build/C/man4/sk98lin.4:592 build/C/man3/stdarg.3:284 build/C/man7/uri.7:673
2475 #: build/C/man4/console_codes.4:614
2476 msgid "In 2.0.23, CSI is broken, and NUL is not ignored inside escape sequences."
2480 #: build/C/man4/console_codes.4:623
2482 "Some older kernel versions (after 2.0) interpret 8-bit control sequences. "
2483 "These \"C1 controls\" use codes between 128 and 159 to replace ESC [, ESC ] "
2484 "and similar two-byte control sequence initiators. There are fragments of "
2485 "that in modern kernels (either overlooked or broken by changes to support "
2486 "UTF-8), but the implementation is incomplete and should be regarded as "
2491 #: build/C/man4/console_codes.4:638
2493 "Linux \"private mode\" sequences do not follow the rules in ECMA-48 for "
2494 "private mode control sequences. In particular, those ending with ] do not "
2495 "use a standard terminating character. The OSC (set palette) sequence is a "
2496 "greater problem, since B<xterm>(1) may interpret this as a control sequence "
2497 "which requires a string terminator (ST). Unlike the B<setterm>(1) sequences "
2498 "which will be ignored (since they are invalid control sequences), the "
2499 "palette sequence will make B<xterm>(1) appear to hang (though pressing the "
2500 "return-key will fix that). To accommodate applications which have been "
2501 "hardcoded to use Linux control sequences, set the B<xterm>(1) resource "
2502 "B<brokenLinuxOSC> to true."
2506 #: build/C/man4/console_codes.4:642
2508 "An older version of this document implied that Linux recognizes the ECMA-48 "
2509 "control sequence for invisible text. It is ignored."
2513 #: build/C/man4/console_codes.4:646
2514 msgid "B<console>(4), B<console_ioctl>(4), B<charsets>(7)"
2518 #: build/C/man4/console_ioctl.4:40
2520 msgid "CONSOLE_IOCTL"
2524 #: build/C/man4/console_ioctl.4:40
2530 #: build/C/man4/console_ioctl.4:43
2531 msgid "console_ioctl - ioctls for console terminal and virtual consoles"
2535 #: build/C/man4/console_ioctl.4:49
2537 "The following Linux-specific B<ioctl>(2) requests are supported. Each "
2538 "requires a third argument, assumed here to be I<argp>."
2542 #: build/C/man4/console_ioctl.4:49
2548 #: build/C/man4/console_ioctl.4:59
2550 "Get state of LEDs. I<argp> points to a I<char>. The lower three bits of "
2551 "I<*argp> are set to the state of the LEDs, as follows:"
2555 #: build/C/man4/console_ioctl.4:61
2557 msgid "LED_CAP \t0x04\tcaps lock led\n"
2561 #: build/C/man4/console_ioctl.4:62
2563 msgid "LEC_NUM \t0x02\tnum lock led\n"
2567 #: build/C/man4/console_ioctl.4:63
2569 msgid "LED_SCR \t0x01\tscroll lock led\n"
2573 #: build/C/man4/console_ioctl.4:65
2579 #: build/C/man4/console_ioctl.4:73
2581 "Set the LEDs. The LEDs are set to correspond to the lower three bits of "
2582 "I<argp>. However, if a higher order bit is set, the LEDs revert to normal: "
2583 "displaying the state of the keyboard functions of caps lock, num lock, and "
2588 #: build/C/man4/console_ioctl.4:80
2590 "Before 1.1.54, the LEDs just reflected the state of the corresponding "
2591 "keyboard flags, and KDGETLED/KDSETLED would also change the keyboard flags. "
2592 "Since 1.1.54 the LEDs can be made to display arbitrary information, but by "
2593 "default they display the keyboard flags. The following two ioctls are used "
2594 "to access the keyboard flags."
2598 #: build/C/man4/console_ioctl.4:80
2604 #: build/C/man4/console_ioctl.4:89
2606 "Get keyboard flags CapsLock, NumLock, ScrollLock (not lights). I<argp> "
2607 "points to a char which is set to the flag state. The low order three bits "
2608 "(mask 0x7) get the current flag state, and the low order bits of the next "
2609 "nibble (mask 0x70) get the default flag state. (Since 1.1.54.)"
2613 #: build/C/man4/console_ioctl.4:89
2619 #: build/C/man4/console_ioctl.4:98
2621 "Set keyboard flags CapsLock, NumLock, ScrollLock (not lights). I<argp> has "
2622 "the desired flag state. The low order three bits (mask 0x7) have the flag "
2623 "state, and the low order bits of the next nibble (mask 0x70) have the "
2624 "default flag state. (Since 1.1.54.)"
2628 #: build/C/man4/console_ioctl.4:98
2630 msgid "B<KDGKBTYPE>"
2634 #: build/C/man4/console_ioctl.4:102
2635 msgid "Get keyboard type. This returns the value KB_101, defined as 0x02."
2639 #: build/C/man4/console_ioctl.4:102
2645 #: build/C/man4/console_ioctl.4:107
2646 msgid "Add I/O port as valid. Equivalent to I<ioperm(arg,1,1)>."
2650 #: build/C/man4/console_ioctl.4:107
2656 #: build/C/man4/console_ioctl.4:112
2657 msgid "Delete I/O port as valid. Equivalent to I<ioperm(arg,1,0)>."
2661 #: build/C/man4/console_ioctl.4:112
2667 #: build/C/man4/console_ioctl.4:117
2669 "Enable I/O to video board. Equivalent to I<ioperm(0x3b4, 0x3df-0x3b4+1, "
2674 #: build/C/man4/console_ioctl.4:117
2676 msgid "B<KDDISABIO>"
2680 #: build/C/man4/console_ioctl.4:122
2682 "Disable I/O to video board. Equivalent to I<ioperm(0x3b4, 0x3df-0x3b4+1, "
2687 #: build/C/man4/console_ioctl.4:122
2689 msgid "B<KDSETMODE>"
2693 #: build/C/man4/console_ioctl.4:127
2694 msgid "Set text/graphics mode. I<argp> is one of these:"
2698 #: build/C/man4/console_ioctl.4:130
2700 msgid "KD_TEXT\t0x00\n"
2704 #: build/C/man4/console_ioctl.4:131
2706 msgid "KD_GRAPHICS\t0x01\n"
2710 #: build/C/man4/console_ioctl.4:133
2712 msgid "B<KDGETMODE>"
2716 #: build/C/man4/console_ioctl.4:141
2718 "Get text/graphics mode. I<argp> points to a I<long> which is set to one of "
2723 #: build/C/man4/console_ioctl.4:141
2729 #: build/C/man4/console_ioctl.4:155
2731 "Generate tone of specified length. The lower 16 bits of I<argp> specify the "
2732 "period in clock cycles, and the upper 16 bits give the duration in msec. If "
2733 "the duration is zero, the sound is turned off. Control returns "
2734 "immediately. For example, I<argp> = (125E<lt>E<lt>16) + 0x637 would specify "
2735 "the beep normally associated with a ctrl-G. (Thus since 0.99pl1; broken in "
2740 #: build/C/man4/console_ioctl.4:155
2742 msgid "B<KIOCSOUND>"
2746 #: build/C/man4/console_ioctl.4:167
2748 "Start or stop sound generation. The lower 16 bits of I<argp> specify the "
2749 "period in clock cycles (that is, I<argp> = 1193180/frequency). I<argp> = 0 "
2750 "turns sound off. In either case, control returns immediately."
2754 #: build/C/man4/console_ioctl.4:167
2760 #: build/C/man4/console_ioctl.4:174
2762 "Get the current default color map from kernel. I<argp> points to a 48-byte "
2763 "array. (Since 1.3.3.)"
2767 #: build/C/man4/console_ioctl.4:174
2773 #: build/C/man4/console_ioctl.4:187
2775 "Change the default text-mode color map. I<argp> points to a 48-byte array "
2776 "which contains, in order, the Red, Green, and Blue values for the 16 "
2777 "available screen colors: 0 is off, and 255 is full intensity. The default "
2778 "colors are, in order: black, dark red, dark green, brown, dark blue, dark "
2779 "purple, dark cyan, light grey, dark grey, bright red, bright green, yellow, "
2780 "bright blue, bright purple, bright cyan and white. (Since 1.3.3.)"
2784 #: build/C/man4/console_ioctl.4:187
2790 #: build/C/man4/console_ioctl.4:197
2792 "Gets 256-character screen font in expanded form. I<argp> points to an 8192 "
2793 "byte array. Fails with error code B<EINVAL> if the currently loaded font is "
2794 "a 512-character font, or if the console is not in text mode."
2798 #: build/C/man4/console_ioctl.4:197
2800 msgid "B<GIO_FONTX>"
2804 #: build/C/man4/console_ioctl.4:225
2806 "Gets screen font and associated information. I<argp> points to a I<struct "
2807 "consolefontdesc> (see B<PIO_FONTX>). On call, the I<charcount> field should "
2808 "be set to the maximum number of characters that would fit in the buffer "
2809 "pointed to by I<chardata>. On return, the I<charcount> and I<charheight> "
2810 "are filled with the respective data for the currently loaded font, and the "
2811 "I<chardata> array contains the font data if the initial value of "
2812 "I<charcount> indicated enough space was available; otherwise the buffer is "
2813 "untouched and I<errno> is set to B<ENOMEM>. (Since 1.3.1.)"
2817 #: build/C/man4/console_ioctl.4:225
2823 #: build/C/man4/console_ioctl.4:240
2825 "Sets 256-character screen font. Load font into the EGA/VGA character "
2826 "generator. I<argp> points to a 8192 byte map, with 32 bytes per character. "
2827 "Only the first I<N> of them are used for an 8xI<N> font (0 E<lt> I<N> E<lt>= "
2828 "32). This call also invalidates the Unicode mapping."
2832 #: build/C/man4/console_ioctl.4:240
2834 msgid "B<PIO_FONTX>"
2838 #: build/C/man4/console_ioctl.4:245
2839 msgid "Sets screen font and associated rendering information. I<argp> points to a"
2843 #: build/C/man4/console_ioctl.4:256
2846 "struct consolefontdesc {\n"
2847 " unsigned short charcount; /* characters in font\n"
2848 " (256 or 512) */\n"
2849 " unsigned short charheight; /* scan lines per\n"
2850 " character (1-32) */\n"
2851 " char *chardata; /* font data in\n"
2852 " expanded form */\n"
2857 #: build/C/man4/console_ioctl.4:264
2859 "If necessary, the screen will be appropriately resized, and B<SIGWINCH> sent "
2860 "to the appropriate processes. This call also invalidates the Unicode "
2861 "mapping. (Since 1.3.1.)"
2865 #: build/C/man4/console_ioctl.4:264
2867 msgid "B<PIO_FONTRESET>"
2871 #: build/C/man4/console_ioctl.4:272
2873 "Resets the screen font, size and Unicode mapping to the bootup defaults. "
2874 "I<argp> is unused, but should be set to NULL to ensure compatibility with "
2875 "future versions of Linux. (Since 1.3.28.)"
2879 #: build/C/man4/console_ioctl.4:272
2881 msgid "B<GIO_SCRNMAP>"
2885 #: build/C/man4/console_ioctl.4:281
2887 "Get screen mapping from kernel. I<argp> points to an area of size E_TABSZ, "
2888 "which is loaded with the font positions used to display each character. "
2889 "This call is likely to return useless information if the currently loaded "
2890 "font is more than 256 characters."
2894 #: build/C/man4/console_ioctl.4:281
2896 msgid "B<GIO_UNISCRNMAP>"
2900 #: build/C/man4/console_ioctl.4:293
2902 "Get full Unicode screen mapping from kernel. I<argp> points to an area of "
2903 "size I<E_TABSZ*sizeof(unsigned short)>, which is loaded with the Unicodes "
2904 "each character represent. A special set of Unicodes, starting at U+F000, "
2905 "are used to represent \"direct to font\" mappings. (Since 1.3.1.)"
2909 #: build/C/man4/console_ioctl.4:293
2911 msgid "B<PIO_SCRNMAP>"
2915 #: build/C/man4/console_ioctl.4:300
2917 "Loads the \"user definable\" (fourth) table in the kernel which maps bytes "
2918 "into console screen symbols. I<argp> points to an area of size E_TABSZ."
2922 #: build/C/man4/console_ioctl.4:300
2924 msgid "B<PIO_UNISCRNMAP>"
2928 #: build/C/man4/console_ioctl.4:308
2930 "Loads the \"user definable\" (fourth) table in the kernel which maps bytes "
2931 "into Unicodes, which are then translated into screen symbols according to "
2932 "the currently loaded Unicode-to-font map. Special Unicodes starting at "
2933 "U+F000 can be used to map directly to the font symbols. (Since 1.3.1.)"
2937 #: build/C/man4/console_ioctl.4:308
2939 msgid "B<GIO_UNIMAP>"
2943 #: build/C/man4/console_ioctl.4:313
2944 msgid "Get Unicode-to-font mapping from kernel. I<argp> points to a"
2948 #: build/C/man4/console_ioctl.4:320
2951 "struct unimapdesc {\n"
2952 " unsigned short entry_ct;\n"
2953 " struct unipair *entries;\n"
2958 #: build/C/man4/console_ioctl.4:326
2959 msgid "where I<entries> points to an array of"
2963 #: build/C/man4/console_ioctl.4:333
2966 "struct unipair {\n"
2967 " unsigned short unicode;\n"
2968 " unsigned short fontpos;\n"
2973 #: build/C/man4/console_ioctl.4:337 build/C/man4/console_ioctl.4:361
2974 msgid "(Since 1.1.92.)"
2978 #: build/C/man4/console_ioctl.4:337
2980 msgid "B<PIO_UNIMAP>"
2984 #: build/C/man4/console_ioctl.4:344
2986 "Put unicode-to-font mapping in kernel. I<argp> points to a I<struct "
2987 "unimapdesc>. (Since 1.1.92)"
2991 #: build/C/man4/console_ioctl.4:344
2993 msgid "B<PIO_UNIMAPCLR>"
2997 #: build/C/man4/console_ioctl.4:349
2998 msgid "Clear table, possibly advise hash algorithm. I<argp> points to a"
3002 #: build/C/man4/console_ioctl.4:357
3005 "struct unimapinit {\n"
3006 " unsigned short advised_hashsize; /* 0 if no opinion */\n"
3007 " unsigned short advised_hashstep; /* 0 if no opinion */\n"
3008 " unsigned short advised_hashlevel; /* 0 if no opinion */\n"
3013 #: build/C/man4/console_ioctl.4:361
3015 msgid "B<KDGKBMODE>"
3019 #: build/C/man4/console_ioctl.4:369
3021 "Gets current keyboard mode. I<argp> points to a I<long> which is set to one "
3026 #: build/C/man4/console_ioctl.4:372
3028 msgid "K_RAW\t0x00\n"
3032 #: build/C/man4/console_ioctl.4:373
3034 msgid "K_XLATE\t0x01\n"
3038 #: build/C/man4/console_ioctl.4:374
3040 msgid "K_MEDIUMRAW\t0x02\n"
3044 #: build/C/man4/console_ioctl.4:375
3046 msgid "K_UNICODE\t0x03\n"
3050 #: build/C/man4/console_ioctl.4:377
3052 msgid "B<KDSKBMODE>"
3056 #: build/C/man4/console_ioctl.4:384
3058 "Sets current keyboard mode. I<argp> is a I<long> equal to one of the above "
3063 #: build/C/man4/console_ioctl.4:384
3065 msgid "B<KDGKBMETA>"
3069 #: build/C/man4/console_ioctl.4:392
3071 "Gets meta key handling mode. I<argp> points to a I<long> which is set to "
3076 #: build/C/man4/console_ioctl.4:395
3078 msgid "K_METABIT\t0x03\tset high order bit\n"
3082 #: build/C/man4/console_ioctl.4:396
3084 msgid "K_ESCPREFIX\t0x04\tescape prefix\n"
3088 #: build/C/man4/console_ioctl.4:398
3090 msgid "B<KDSKBMETA>"
3094 #: build/C/man4/console_ioctl.4:405
3096 "Sets meta key handling mode. I<argp> is a I<long> equal to one of the above "
3101 #: build/C/man4/console_ioctl.4:405
3107 #: build/C/man4/console_ioctl.4:410
3109 "Gets one entry in key translation table (keycode to action code). I<argp> "
3114 #: build/C/man4/console_ioctl.4:418
3117 "struct kbentry {\n"
3118 " unsigned char kb_table;\n"
3119 " unsigned char kb_index;\n"
3120 " unsigned short kb_value;\n"
3125 #: build/C/man4/console_ioctl.4:437
3127 "with the first two members filled in: I<kb_table> selects the key table (0 "
3128 "E<lt>= I<kb_table> E<lt> MAX_NR_KEYMAPS), and I<kb_index> is the keycode (0 "
3129 "E<lt>= I<kb_index> E<lt> NR_KEYS). I<kb_value> is set to the corresponding "
3130 "action code, or K_HOLE if there is no such key, or K_NOSUCHMAP if "
3131 "I<kb_table> is invalid."
3135 #: build/C/man4/console_ioctl.4:437
3141 #: build/C/man4/console_ioctl.4:443
3142 msgid "Sets one entry in translation table. I<argp> points to a I<struct kbentry>."
3146 #: build/C/man4/console_ioctl.4:443
3148 msgid "B<KDGKBSENT>"
3152 #: build/C/man4/console_ioctl.4:448
3153 msgid "Gets one function key string. I<argp> points to a"
3157 #: build/C/man4/console_ioctl.4:455
3160 "struct kbsentry {\n"
3161 " unsigned char kb_func;\n"
3162 " unsigned char kb_string[512];\n"
3167 #: build/C/man4/console_ioctl.4:463
3169 "I<kb_string> is set to the (null-terminated) string corresponding to the "
3170 "I<kb_func>th function key action code."
3174 #: build/C/man4/console_ioctl.4:463
3176 msgid "B<KDSKBSENT>"
3180 #: build/C/man4/console_ioctl.4:469
3181 msgid "Sets one function key string entry. I<argp> points to a I<struct kbsentry>."
3185 #: build/C/man4/console_ioctl.4:469
3187 msgid "B<KDGKBDIACR>"
3191 #: build/C/man4/console_ioctl.4:474
3192 msgid "Read kernel accent table. I<argp> points to a"
3196 #: build/C/man4/console_ioctl.4:481
3199 "struct kbdiacrs {\n"
3200 " unsigned int kb_cnt;\n"
3201 " struct kbdiacr kbdiacr[256];\n"
3206 #: build/C/man4/console_ioctl.4:488
3207 msgid "where I<kb_cnt> is the number of entries in the array, each of which is a"
3211 #: build/C/man4/console_ioctl.4:496
3214 "struct kbdiacr {\n"
3215 " unsigned char diacr;\n"
3216 " unsigned char base;\n"
3217 " unsigned char result;\n"
3222 #: build/C/man4/console_ioctl.4:498
3224 msgid "B<KDGETKEYCODE>"
3228 #: build/C/man4/console_ioctl.4:503
3229 msgid "Read kernel keycode table entry (scan code to keycode). I<argp> points to a"
3233 #: build/C/man4/console_ioctl.4:510
3236 "struct kbkeycode {\n"
3237 " unsigned int scancode;\n"
3238 " unsigned int keycode;\n"
3243 #: build/C/man4/console_ioctl.4:524
3245 "I<keycode> is set to correspond to the given I<scancode>. (89 E<lt>= "
3246 "I<scancode> E<lt>= 255 only. For 1 E<lt>= I<scancode> E<lt>= 88, "
3247 "I<keycode>==I<scancode>.) (Since 1.1.63.)"
3251 #: build/C/man4/console_ioctl.4:524
3253 msgid "B<KDSETKEYCODE>"
3257 #: build/C/man4/console_ioctl.4:531
3259 "Write kernel keycode table entry. I<argp> points to a I<struct kbkeycode>. "
3264 #: build/C/man4/console_ioctl.4:531
3266 msgid "B<KDSIGACCEPT>"
3270 #: build/C/man4/console_ioctl.4:543
3272 "The calling process indicates its willingness to accept the signal I<argp> "
3273 "when it is generated by pressing an appropriate key combination. (1 E<lt>= "
3274 "I<argp> E<lt>= NSIG). (See I<spawn_console>() in "
3275 "I<linux/drivers/char/keyboard.c>.)"
3279 #: build/C/man4/console_ioctl.4:543
3281 msgid "B<VT_OPENQRY>"
3285 #: build/C/man4/console_ioctl.4:553
3287 "Returns the first available (non-opened) console. I<argp> points to an "
3288 "I<int> which is set to the number of the vt (1 E<lt>= I<*argp> E<lt>= "
3293 #: build/C/man4/console_ioctl.4:553
3295 msgid "B<VT_GETMODE>"
3299 #: build/C/man4/console_ioctl.4:558
3300 msgid "Get mode of active vt. I<argp> points to a"
3304 #: build/C/man4/console_ioctl.4:568
3307 "struct vt_mode {\n"
3308 " char mode; /* vt mode */\n"
3309 " char waitv; /* if set, hang on writes if not active */\n"
3310 " short relsig; /* signal to raise on release req */\n"
3311 " short acqsig; /* signal to raise on acquisition */\n"
3312 " short frsig; /* unused (set to 0) */\n"
3317 #: build/C/man4/console_ioctl.4:574
3319 "which is set to the mode of the active vt. I<mode> is set to one of these "
3324 #: build/C/man4/console_ioctl.4:577
3326 msgid "VT_AUTO\tauto vt switching\n"
3330 #: build/C/man4/console_ioctl.4:578
3332 msgid "VT_PROCESS\tprocess controls switching\n"
3336 #: build/C/man4/console_ioctl.4:579
3338 msgid "VT_ACKACQ\tacknowledge switch\n"
3342 #: build/C/man4/console_ioctl.4:581
3344 msgid "B<VT_SETMODE>"
3348 #: build/C/man4/console_ioctl.4:587
3349 msgid "Set mode of active vt. I<argp> points to a I<struct vt_mode>."
3353 #: build/C/man4/console_ioctl.4:587
3355 msgid "B<VT_GETSTATE>"
3359 #: build/C/man4/console_ioctl.4:592
3360 msgid "Get global vt state info. I<argp> points to a"
3364 #: build/C/man4/console_ioctl.4:600
3367 "struct vt_stat {\n"
3368 " unsigned short v_active; /* active vt */\n"
3369 " unsigned short v_signal; /* signal to send */\n"
3370 " unsigned short v_state; /* vt bit mask */\n"
3375 #: build/C/man4/console_ioctl.4:607
3377 "For each vt in use, the corresponding bit in the I<v_state> member is set. "
3378 "(Kernels 1.0 through 1.1.92.)"
3382 #: build/C/man4/console_ioctl.4:607
3384 msgid "B<VT_RELDISP>"
3388 #: build/C/man4/console_ioctl.4:610
3389 msgid "Release a display."
3393 #: build/C/man4/console_ioctl.4:610
3395 msgid "B<VT_ACTIVATE>"
3399 #: build/C/man4/console_ioctl.4:617
3400 msgid "Switch to vt I<argp> (1 E<lt>= I<argp> E<lt>= MAX_NR_CONSOLES)."
3404 #: build/C/man4/console_ioctl.4:617
3406 msgid "B<VT_WAITACTIVE>"
3410 #: build/C/man4/console_ioctl.4:622
3411 msgid "Wait until vt I<argp> has been activated."
3415 #: build/C/man4/console_ioctl.4:622
3417 msgid "B<VT_DISALLOCATE>"
3421 #: build/C/man4/console_ioctl.4:627
3422 msgid "Deallocate the memory associated with vt I<argp>. (Since 1.1.54.)"
3426 #: build/C/man4/console_ioctl.4:627
3428 msgid "B<VT_RESIZE>"
3432 #: build/C/man4/console_ioctl.4:632
3433 msgid "Set the kernel's idea of screensize. I<argp> points to a"
3437 #: build/C/man4/console_ioctl.4:640
3440 "struct vt_sizes {\n"
3441 " unsigned short v_rows; /* # rows */\n"
3442 " unsigned short v_cols; /* # columns */\n"
3443 " unsigned short v_scrollsize; /* no longer used */\n"
3448 #: build/C/man4/console_ioctl.4:647
3450 "Note that this does not change the videomode. See B<resizecons>(8). (Since "
3455 #: build/C/man4/console_ioctl.4:647
3457 msgid "B<VT_RESIZEX>"
3461 #: build/C/man4/console_ioctl.4:652
3462 msgid "Set the kernel's idea of various screen parameters. I<argp> points to a"
3466 #: build/C/man4/console_ioctl.4:667
3469 "struct vt_consize {\n"
3470 " unsigned short v_rows; /* number of rows */\n"
3471 " unsigned short v_cols; /* number of columns */\n"
3472 " unsigned short v_vlin; /* number of pixel rows\n"
3474 " unsigned short v_clin; /* number of pixel rows\n"
3475 " per character */\n"
3476 " unsigned short v_vcol; /* number of pixel columns\n"
3478 " unsigned short v_ccol; /* number of pixel columns\n"
3479 " per character */\n"
3484 #: build/C/man4/console_ioctl.4:676
3486 "Any parameter may be set to zero, indicating \"no change\", but if multiple "
3487 "parameters are set, they must be self-consistent. Note that this does not "
3488 "change the videomode. See B<resizecons>(8). (Since 1.3.3.)"
3492 #: build/C/man4/console_ioctl.4:683
3494 "The action of the following ioctls depends on the first byte in the struct "
3495 "pointed to by I<argp>, referred to here as the I<subcode>. These are legal "
3496 "only for the superuser or the owner of the current terminal."
3500 #: build/C/man4/console_ioctl.4:683
3502 msgid "B<TIOCLINUX, subcode=0>"
3506 #: build/C/man4/console_ioctl.4:691
3508 "Dump the screen. Disappeared in 1.1.92. (With kernel 1.1.92 or later, read "
3509 "from I</dev/vcsN> or I</dev/vcsaN> instead.)"
3513 #: build/C/man4/console_ioctl.4:691
3515 msgid "B<TIOCLINUX, subcode=1>"
3519 #: build/C/man4/console_ioctl.4:695
3520 msgid "Get task information. Disappeared in 1.1.92."
3524 #: build/C/man4/console_ioctl.4:695
3526 msgid "B<TIOCLINUX, subcode=2>"
3530 #: build/C/man4/console_ioctl.4:700
3531 msgid "Set selection. I<argp> points to a"
3535 #: build/C/man4/console_ioctl.4:708
3540 " short xs, ys, xe, ye;\n"
3541 " short sel_mode;\n"
3546 #: build/C/man4/console_ioctl.4:728
3548 "I<xs> and I<ys> are the starting column and row. I<xe> and I<ye> are the "
3549 "ending column and row. (Upper left corner is row=column=1.) I<sel_mode> is "
3550 "0 for character-by-character selection, 1 for word-by-word selection, or 2 "
3551 "for line-by-line selection. The indicated screen characters are highlighted "
3552 "and saved in the static array sel_buffer in I<devices/char/console.c>."
3556 #: build/C/man4/console_ioctl.4:728
3558 msgid "B<TIOCLINUX, subcode=3>"
3562 #: build/C/man4/console_ioctl.4:734
3564 "Paste selection. The characters in the selection buffer are written to "
3569 #: build/C/man4/console_ioctl.4:734
3571 msgid "B<TIOCLINUX, subcode=4>"
3575 #: build/C/man4/console_ioctl.4:737
3576 msgid "Unblank the screen."
3580 #: build/C/man4/console_ioctl.4:737
3582 msgid "B<TIOCLINUX, subcode=5>"
3586 #: build/C/man4/console_ioctl.4:742
3588 "Sets contents of a 256-bit look up table defining characters in a \"word\", "
3589 "for word-by-word selection. (Since 1.1.32.)"
3593 #: build/C/man4/console_ioctl.4:742
3595 msgid "B<TIOCLINUX, subcode=6>"
3599 #: build/C/man4/console_ioctl.4:749
3601 "I<argp> points to a char which is set to the value of the kernel variable "
3602 "I<shift_state>. (Since 1.1.32.)"
3606 #: build/C/man4/console_ioctl.4:749
3608 msgid "B<TIOCLINUX, subcode=7>"
3612 #: build/C/man4/console_ioctl.4:756
3614 "I<argp> points to a char which is set to the value of the kernel variable "
3615 "I<report_mouse>. (Since 1.1.33.)"
3619 #: build/C/man4/console_ioctl.4:756
3621 msgid "B<TIOCLINUX, subcode=8>"
3625 #: build/C/man4/console_ioctl.4:764
3627 "Dump screen width and height, cursor position, and all the "
3628 "character-attribute pairs. (Kernels 1.1.67 through 1.1.91 only. With "
3629 "kernel 1.1.92 or later, read from I</dev/vcsa*> instead.)"
3633 #: build/C/man4/console_ioctl.4:764
3635 msgid "B<TIOCLINUX, subcode=9>"
3639 #: build/C/man4/console_ioctl.4:772
3641 "Restore screen width and height, cursor position, and all the "
3642 "character-attribute pairs. (Kernels 1.1.67 through 1.1.91 only. With "
3643 "kernel 1.1.92 or later, write to I</dev/vcsa*> instead.)"
3647 #: build/C/man4/console_ioctl.4:772
3649 msgid "B<TIOCLINUX, subcode=10>"
3653 #: build/C/man4/console_ioctl.4:780
3655 "Handles the Power Saving feature of the new generation of monitors. VESA "
3656 "screen blanking mode is set to I<argp[1]>, which governs what screen "
3661 #: build/C/man4/console_ioctl.4:781
3667 #: build/C/man4/console_ioctl.4:783
3668 msgid "Screen blanking is disabled."
3672 #: build/C/man4/console_ioctl.4:783
3678 #: build/C/man4/console_ioctl.4:790
3680 "The current video adapter register settings are saved, then the controller "
3681 "is programmed to turn off the vertical synchronization pulses. This puts "
3682 "the monitor into \"standby\" mode. If your monitor has an Off_Mode timer, "
3683 "then it will eventually power down by itself."
3687 #: build/C/man4/console_ioctl.4:790
3693 #: build/C/man4/console_ioctl.4:800
3695 "The current settings are saved, then both the vertical and horizontal "
3696 "synchronization pulses are turned off. This puts the monitor into \"off\" "
3697 "mode. If your monitor has no Off_Mode timer, or if you want your monitor to "
3698 "power down immediately when the blank_timer times out, then you choose this "
3699 "option. (I<Caution:> Powering down frequently will damage the monitor.) "
3704 #: build/C/man4/console_ioctl.4:801 build/C/man3/mkfifo.3:120 build/C/man2/mknod.2:149 build/C/man3/setlogmask.3:69 build/C/man4/st.4:827 build/C/man2/syslog.2:244
3706 msgid "RETURN VALUE"
3710 #: build/C/man4/console_ioctl.4:806
3711 msgid "On success, 0 is returned. On error, -1 is returned, and I<errno> is set."
3715 #: build/C/man4/console_ioctl.4:806 build/C/man3/mkfifo.3:128 build/C/man2/mknod.2:156 build/C/man3/setlogmask.3:71 build/C/man2/syslog.2:260
3721 #: build/C/man4/console_ioctl.4:809
3722 msgid "I<errno> may take on these values:"
3726 #: build/C/man4/console_ioctl.4:809 build/C/man3/mkfifo.3:168 build/C/man2/mknod.2:230
3732 #: build/C/man4/console_ioctl.4:812
3733 msgid "The file descriptor is invalid."
3737 #: build/C/man4/console_ioctl.4:812
3743 #: build/C/man4/console_ioctl.4:816
3745 "The file descriptor is not associated with a character special device, or "
3746 "the specified request does not apply to it."
3750 #: build/C/man4/console_ioctl.4:816 build/C/man2/mknod.2:179 build/C/man4/st.4:842 build/C/man2/syslog.2:261
3756 #: build/C/man4/console_ioctl.4:821
3757 msgid "The file descriptor or I<argp> is invalid."
3761 #: build/C/man4/console_ioctl.4:821 build/C/man2/mknod.2:209 build/C/man2/syslog.2:285
3767 #: build/C/man4/console_ioctl.4:824
3768 msgid "Insufficient permission."
3772 #: build/C/man4/console_ioctl.4:835
3774 "B<Warning>: Do not regard this man page as documentation of the Linux "
3775 "console ioctls. This is provided for the curious only, as an alternative to "
3776 "reading the source. Ioctl's are undocumented Linux internals, liable to be "
3777 "changed without warning. (And indeed, this page more or less describes the "
3778 "situation as of kernel version 1.1.94; there are many minor and not-so-minor "
3779 "differences with earlier versions.)"
3783 #: build/C/man4/console_ioctl.4:840
3785 "Very often, ioctls are introduced for communication between the kernel and "
3786 "one particular well-known program (fdisk, hdparm, setserial, tunelp, "
3787 "loadkeys, selection, setfont, etc.), and their behavior will be changed when "
3788 "required by this particular program."
3792 #: build/C/man4/console_ioctl.4:844
3794 "Programs using these ioctls will not be portable to other versions of UNIX, "
3795 "will not work on older versions of Linux, and will not work on future "
3796 "versions of Linux."
3800 #: build/C/man4/console_ioctl.4:846
3801 msgid "Use POSIX functions."
3805 #: build/C/man4/console_ioctl.4:870
3807 "B<dumpkeys>(1), B<kbd_mode>(1), B<loadkeys>(1), B<mknod>(1), B<setleds>(1), "
3808 "B<setmetamode>(1), B<execve>(2), B<fcntl>(2), B<ioperm>(2), B<termios>(3), "
3809 "B<console>(4), B<console_codes>(4), B<mt>(4), B<sd>(4), B<tty>(4), "
3810 "B<tty_ioctl>(4), B<ttyS>(4), B<vcs>(4), B<vcsa>(4), B<charsets>(7), "
3811 "B<mapscrn>(8), B<resizecons>(8), B<setfont>(8)"
3815 #: build/C/man4/console_ioctl.4:873
3816 msgid "I</usr/include/linux/kd.h>, I</usr/include/linux/vt.h>"
3820 #: build/C/man5/core.5:25
3826 #: build/C/man5/core.5:25
3832 #: build/C/man5/core.5:28
3833 msgid "core - core dump file"
3837 #: build/C/man5/core.5:39
3839 "The default action of certain signals is to cause a process to terminate and "
3840 "produce a I<core dump file>, a disk file containing an image of the "
3841 "process's memory at the time of termination. This image can be used in a "
3842 "debugger (e.g., B<gdb>(1)) to inspect the state of the program at the time "
3843 "that it terminated. A list of the signals which cause a process to dump "
3844 "core can be found in B<signal>(7)."
3848 #: build/C/man5/core.5:46
3850 "A process can set its soft B<RLIMIT_CORE> resource limit to place an upper "
3851 "limit on the size of the core dump file that will be produced if it receives "
3852 "a \"core dump\" signal; see B<getrlimit>(2) for details."
3856 #: build/C/man5/core.5:49
3857 msgid "There are various circumstances in which a core dump file is not produced:"
3861 #: build/C/man5/core.5:61
3863 "The process does not have permission to write the core file. (By default "
3864 "the core file is called I<core>, and is created in the current working "
3865 "directory. See below for details on naming.) Writing the core file will "
3866 "fail if the directory in which it is to be created is nonwritable, or if a "
3867 "file with the same name exists and is not writable or is not a regular file "
3868 "(e.g., it is a directory or a symbolic link)."
3872 #: build/C/man5/core.5:65
3874 "A (writable, regular) file with the same name as would be used for the core "
3875 "dump already exists, but there is more than one hard link to that file."
3879 #: build/C/man5/core.5:69
3881 "The filesystem where the core dump file would be created is full; or has run "
3882 "out of inodes; or is mounted read-only; or the user has reached their quota "
3883 "for the filesystem."
3887 #: build/C/man5/core.5:72
3888 msgid "The directory in which the core dump file is to be created does not exist."
3892 #: build/C/man5/core.5:85
3894 "The B<RLIMIT_CORE> (core file size) or B<RLIMIT_FSIZE> (file size) resource "
3895 "limits for the process are set to zero; see B<getrlimit>(2) and the "
3896 "documentation of the shell's I<ulimit> command (I<limit> in B<csh>(1))."
3900 #: build/C/man5/core.5:88
3902 "The binary being executed by the process does not have read permission "
3906 #. FIXME . Perhaps relocate discussion of /proc/sys/fs/suid_dumpable
3907 #. and PR_SET_DUMPABLE to this page?
3909 #: build/C/man5/core.5:101
3911 "The process is executing a set-user-ID (set-group-ID) program that is owned "
3912 "by a user (group) other than the real user (group) ID of the process. "
3913 "(However, see the description of the B<prctl>(2) B<PR_SET_DUMPABLE> "
3914 "operation, and the description of the I</proc/sys/fs/suid_dumpable> file in "
3918 #. commit 046d662f481830e652ac34cd112249adde16452a
3920 #: build/C/man5/core.5:107
3922 "(Since Linux 3.7) The kernel was configured without the B<CONFIG_COREDUMP> "
3927 #: build/C/man5/core.5:113
3929 "In addition, a core dump may exclude part of the address space of the "
3930 "process if the B<madvise>(2) B<MADV_DONTDUMP> flag was employed."
3934 #: build/C/man5/core.5:113
3936 msgid "Naming of core dump files"
3940 #: build/C/man5/core.5:122
3942 "By default, a core dump file is named I<core>, but the "
3943 "I</proc/sys/kernel/core_pattern> file (since Linux 2.6 and 2.4.21) can be "
3944 "set to define a template that is used to name core dump files. The template "
3945 "can contain % specifiers which are substituted by the following values when "
3946 "a core file is created:"
3950 #: build/C/man5/core.5:125
3956 #: build/C/man5/core.5:128
3957 msgid "a single % character"
3961 #: build/C/man5/core.5:128
3967 #: build/C/man5/core.5:131
3968 msgid "core file size soft resource limit of crashing process (since Linux 2.6.24)"
3972 #: build/C/man5/core.5:131
3977 #. Added in git commit 12a2b4b2241e318b4f6df31228e4272d2c2968a1
3979 #: build/C/man5/core.5:138
3981 "dump mode\\(emsame as value returned by B<prctl>(2) B<PR_GET_DUMPABLE> "
3986 #: build/C/man5/core.5:138
3992 #: build/C/man5/core.5:141
3993 msgid "executable filename (without path prefix)"
3997 #: build/C/man5/core.5:141
4003 #: build/C/man5/core.5:146
4005 "pathname of executable, with slashes (\\(aq/\\(aq) replaced by exclamation "
4006 "marks (\\(aq!\\(aq) (since Linux 3.0)."
4010 #: build/C/man5/core.5:146
4016 #: build/C/man5/core.5:149
4017 msgid "(numeric) real GID of dumped process"
4021 #: build/C/man5/core.5:149
4027 #: build/C/man5/core.5:152
4028 msgid "hostname (same as I<nodename> returned by B<uname>(2))"
4032 #: build/C/man5/core.5:152
4038 #: build/C/man5/core.5:156
4040 "PID of dumped process, as seen in the PID namespace in which the process "
4045 #: build/C/man5/core.5:156
4050 #. Added in git commit 65aafb1e7484b7434a0c1d4c593191ebe5776a2f
4052 #: build/C/man5/core.5:161
4054 "PID of dumped process, as seen in the initial PID namespace (since Linux "
4059 #: build/C/man5/core.5:161
4065 #: build/C/man5/core.5:164
4066 msgid "number of signal causing dump"
4070 #: build/C/man5/core.5:164
4076 #: build/C/man5/core.5:168
4078 "time of dump, expressed as seconds since the Epoch, 1970-01-01 00:00:00 "
4083 #: build/C/man5/core.5:168
4089 #: build/C/man5/core.5:171
4090 msgid "(numeric) real UID of dumped process"
4094 #: build/C/man5/core.5:190
4096 "A single % at the end of the template is dropped from the core filename, as "
4097 "is the combination of a % followed by any character other than those listed "
4098 "above. All other characters in the template become a literal part of the "
4099 "core filename. The template may include \\(aq/\\(aq characters, which are "
4100 "interpreted as delimiters for directory names. The maximum size of the "
4101 "resulting core filename is 128 bytes (64 bytes in kernels before 2.6.19). "
4102 "The default value in this file is \"core\". For backward compatibility, if "
4103 "I</proc/sys/kernel/core_pattern> does not include \"%p\" and "
4104 "I</proc/sys/kernel/core_uses_pid> (see below) is nonzero, then .PID will be "
4105 "appended to the core filename."
4109 #: build/C/man5/core.5:201
4111 "Since version 2.4, Linux has also provided a more primitive method of "
4112 "controlling the name of the core dump file. If the "
4113 "I</proc/sys/kernel/core_uses_pid> file contains the value 0, then a core "
4114 "dump file is simply named I<core>. If this file contains a nonzero value, "
4115 "then the core dump file includes the process ID in a name of the form "
4119 #. 9520628e8ceb69fa9a4aee6b57f22675d9e1b709
4121 #: build/C/man5/core.5:208
4123 "Since Linux 3.6, if I</proc/sys/fs/suid_dumpable> is set to 2 "
4124 "(\"suidsafe\"), the pattern must be either an absolute pathname (starting "
4125 "with a leading \\(aq/\\(aq character) or a pipe, as defined below."
4129 #: build/C/man5/core.5:208
4131 msgid "Piping core dumps to a program"
4135 #: build/C/man5/core.5:218
4137 "Since kernel 2.6.19, Linux supports an alternate syntax for the "
4138 "I</proc/sys/kernel/core_pattern> file. If the first character of this file "
4139 "is a pipe symbol (B<|>), then the remainder of the line is interpreted as a "
4140 "program to be executed. Instead of being written to a disk file, the core "
4141 "dump is given as standard input to the program. Note the following points:"
4145 #: build/C/man5/core.5:222
4147 "The program must be specified using an absolute pathname (or a pathname "
4148 "relative to the root directory, I</>), and must immediately follow the '|' "
4153 #: build/C/man5/core.5:225
4154 msgid "The process created to run the program runs as user and group I<root>."
4158 #: build/C/man5/core.5:229
4160 "Command-line arguments can be supplied to the program (since Linux 2.6.24), "
4161 "delimited by white space (up to a total line length of 128 bytes)."
4165 #: build/C/man5/core.5:235
4167 "The command-line arguments can include any of the % specifiers listed "
4168 "above. For example, to pass the PID of the process that is being dumped, "
4169 "specify I<%p> in an argument."
4173 #: build/C/man5/core.5:235
4175 msgid "Controlling which mappings are written to the core dump"
4179 #: build/C/man5/core.5:241
4181 "Since kernel 2.6.23, the Linux-specific I</proc/PID/coredump_filter> file "
4182 "can be used to control which memory segments are written to the core dump "
4183 "file in the event that a core dump is performed for the process with the "
4184 "corresponding process ID."
4188 #: build/C/man5/core.5:247
4190 "The value in the file is a bit mask of memory mapping types (see "
4191 "B<mmap>(2)). If a bit is set in the mask, then memory mappings of the "
4192 "corresponding type are dumped; otherwise they are not dumped. The bits in "
4193 "this file have the following meanings:"
4197 #: build/C/man5/core.5:250
4203 #: build/C/man5/core.5:253
4204 msgid "Dump anonymous private mappings."
4208 #: build/C/man5/core.5:253
4214 #: build/C/man5/core.5:256
4215 msgid "Dump anonymous shared mappings."
4219 #: build/C/man5/core.5:256
4225 #: build/C/man5/core.5:259
4226 msgid "Dump file-backed private mappings."
4230 #: build/C/man5/core.5:259
4235 #. file-backed shared mappings of course also update the underlying
4238 #: build/C/man5/core.5:264
4239 msgid "Dump file-backed shared mappings."
4243 #: build/C/man5/core.5:264
4245 msgid "bit 4 (since Linux 2.6.24)"
4249 #: build/C/man5/core.5:267
4250 msgid "Dump ELF headers."
4254 #: build/C/man5/core.5:267
4256 msgid "bit 5 (since Linux 2.6.28)"
4260 #: build/C/man5/core.5:270
4261 msgid "Dump private huge pages."
4265 #: build/C/man5/core.5:270
4267 msgid "bit 6 (since Linux 2.6.28)"
4271 #: build/C/man5/core.5:273
4272 msgid "Dump shared huge pages."
4276 #: build/C/man5/core.5:281
4278 "By default, the following bits are set: 0, 1, 4 (if the "
4279 "B<CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS> kernel configuration option is "
4280 "enabled), and 5. The value of this file is displayed in hexadecimal. (The "
4281 "default value is thus displayed as 33.)"
4285 #: build/C/man5/core.5:286
4287 "Memory-mapped I/O pages such as frame buffer are never dumped, and virtual "
4288 "DSO pages are always dumped, regardless of the I<coredump_filter> value."
4292 #: build/C/man5/core.5:296
4294 "A child process created via B<fork>(2) inherits its parent's "
4295 "I<coredump_filter> value; the I<coredump_filter> value is preserved across "
4300 #: build/C/man5/core.5:300
4302 "It can be useful to set I<coredump_filter> in the parent shell before "
4303 "running a program, for example:"
4307 #: build/C/man5/core.5:305
4310 "$B< echo 0x7 E<gt> /proc/self/coredump_filter>\n"
4311 "$B< ./some_program>\n"
4315 #: build/C/man5/core.5:311
4317 "This file is provided only if the kernel was built with the "
4318 "B<CONFIG_ELF_CORE> configuration option."
4322 #: build/C/man5/core.5:316
4324 "The B<gdb>(1) I<gcore> command can be used to obtain a core dump of a "
4328 #. Changed with commit 6409324b385f3f63a03645b4422e3be67348d922
4329 #. Always including the PID in the name of the core file made
4330 #. sense for LinuxThreads, where each thread had a unique PID,
4331 #. but doesn't seem to serve any purpose with NPTL, where all the
4332 #. threads in a process share the same PID (as POSIX.1 requires).
4333 #. Probably the behavior is maintained so that applications using
4334 #. LinuxThreads continue appending the PID (the kernel has no easy
4335 #. way of telling which threading implementation the user-space
4336 #. application is using). -- mtk, April 2006
4338 #: build/C/man5/core.5:339
4340 "In Linux versions up to and including 2.6.27, if a multithreaded process "
4341 "(or, more precisely, a process that shares its memory with another process "
4342 "by being created with the B<CLONE_VM> flag of B<clone>(2)) dumps core, then "
4343 "the process ID is always appended to the core filename, unless the process "
4344 "ID was already included elsewhere in the filename via a %p specification in "
4345 "I</proc/sys/kernel/core_pattern>. (This is primarily useful when employing "
4346 "the obsolete LinuxThreads implementation, where each thread of a process has "
4351 #: build/C/man5/core.5:339 build/C/man3/gnu_get_libc_version.3:51 build/C/man3/stdarg.3:300 build/C/man4/vcs.4:101
4357 #: build/C/man5/core.5:347
4359 "The program below can be used to demonstrate the use of the pipe syntax in "
4360 "the I</proc/sys/kernel/core_pattern> file. The following shell session "
4361 "demonstrates the use of this program (compiled to create an executable named "
4362 "I<core_pattern_pipe_test>):"
4366 #: build/C/man5/core.5:368
4369 "$B< cc -o core_pattern_pipe_test core_pattern_pipe_test.c>\n"
4372 "#B< echo \"|$PWD/core_pattern_pipe_test %p UID=%u GID=%g sig=%s\" E<gt> "
4374 "B</proc/sys/kernel/core_pattern>\n"
4377 "B<^\\e> # type control-backslash\n"
4378 "Quit (core dumped)\n"
4379 "$B< cat core.info>\n"
4381 "argc[0]=E<lt>/home/mtk/core_pattern_pipe_testE<gt>\n"
4382 "argc[1]=E<lt>20575E<gt>\n"
4383 "argc[2]=E<lt>UID=1000E<gt>\n"
4384 "argc[3]=E<lt>GID=100E<gt>\n"
4385 "argc[4]=E<lt>sig=3E<gt>\n"
4386 "Total bytes in core dump: 282624\n"
4390 #: build/C/man5/core.5:370 build/C/man3/gnu_get_libc_version.3:61
4392 msgid "Program source"
4396 #: build/C/man5/core.5:374
4398 msgid "/* core_pattern_pipe_test.c */\n"
4402 #: build/C/man5/core.5:382
4405 "#define _GNU_SOURCE\n"
4406 "#include E<lt>sys/stat.hE<gt>\n"
4407 "#include E<lt>fcntl.hE<gt>\n"
4408 "#include E<lt>limits.hE<gt>\n"
4409 "#include E<lt>stdio.hE<gt>\n"
4410 "#include E<lt>stdlib.hE<gt>\n"
4411 "#include E<lt>unistd.hE<gt>\n"
4415 #: build/C/man5/core.5:384
4417 msgid "#define BUF_SIZE 1024\n"
4421 #: build/C/man5/core.5:393
4425 "main(int argc, char *argv[])\n"
4429 " char buf[BUF_SIZE];\n"
4431 " char cwd[PATH_MAX];\n"
4435 #: build/C/man5/core.5:396
4438 " /* Change our current working directory to that of the\n"
4439 " crashing process */\n"
4443 #: build/C/man5/core.5:399
4446 " snprintf(cwd, PATH_MAX, \"/proc/%s/cwd\", argv[1]);\n"
4451 #: build/C/man5/core.5:401
4453 msgid " /* Write output to file \"core.info\" in that directory */\n"
4457 #: build/C/man5/core.5:405
4460 " fp = fopen(\"core.info\", \"w+\");\n"
4461 " if (fp == NULL)\n"
4462 " exit(EXIT_FAILURE);\n"
4466 #: build/C/man5/core.5:408
4469 " /* Display command-line arguments given to core_pattern\n"
4470 " pipe program */\n"
4474 #: build/C/man5/core.5:412
4477 " fprintf(fp, \"argc=%d\\en\", argc);\n"
4478 " for (j = 0; j E<lt> argc; j++)\n"
4479 " fprintf(fp, \"argc[%d]=E<lt>%sE<gt>\\en\", j, argv[j]);\n"
4483 #: build/C/man5/core.5:414
4485 msgid " /* Count bytes in standard input (the core dump) */\n"
4489 #: build/C/man5/core.5:419
4493 " while ((nread = read(STDIN_FILENO, buf, BUF_SIZE)) E<gt> 0)\n"
4495 " fprintf(fp, \"Total bytes in core dump: %d\\en\", tot);\n"
4499 #: build/C/man5/core.5:422
4502 " exit(EXIT_SUCCESS);\n"
4507 #: build/C/man5/core.5:434
4509 "B<bash>(1), B<gdb>(1), B<getrlimit>(2), B<mmap>(2), B<prctl>(2), "
4510 "B<sigaction>(2), B<elf>(5), B<proc>(5), B<pthreads>(7), B<signal>(7)"
4514 #: build/C/man4/cpuid.4:26
4520 #: build/C/man4/cpuid.4:26 build/C/man4/msr.4:26
4526 #: build/C/man4/cpuid.4:29
4527 msgid "cpuid - x86 CPUID access device"
4531 #: build/C/man4/cpuid.4:31
4532 msgid "CPUID provides an interface for querying information about the x86 CPU."
4536 #: build/C/man4/cpuid.4:38
4538 "This device is accessed by B<lseek>(2) or B<pread>(2) to the appropriate "
4539 "CPUID level and reading in chunks of 16 bytes. A larger read size means "
4540 "multiple reads of consecutive levels."
4544 #: build/C/man4/cpuid.4:47
4546 "The lower 32 bits of the file position is used as the incoming I<%eax>, and "
4547 "the upper 32 bits of the file position as the incoming I<%ecx>, the latter "
4548 "intended for \"counting\" I<eax> levels like I<eax=4>."
4552 #: build/C/man4/cpuid.4:57
4554 "This driver uses I</dev/cpu/CPUNUM/cpuid>, where I<CPUNUM> is the minor "
4555 "number, and on an SMP box will direct the access to CPU I<CPUNUM> as listed "
4556 "in I</proc/cpuinfo>."
4560 #: build/C/man4/cpuid.4:62
4562 "This file is protected so that it can be read only by the user I<root>, or "
4563 "members of the group I<root>."
4567 #: build/C/man4/cpuid.4:67
4569 "The CPUID instruction can be directly executed by a program using inline "
4570 "assembler. However this device allows convenient access to all CPUs without "
4571 "changing process affinity."
4575 #: build/C/man4/cpuid.4:76
4577 "Most of the information in I<cpuid> is reported by the kernel in cooked form "
4578 "either in I</proc/cpuinfo> or through subdirectories in "
4579 "I</sys/devices/system/cpu>. Direct CPUID access through this device should "
4580 "only be used in exceptional cases."
4584 #: build/C/man4/cpuid.4:82
4586 "The I<cpuid> driver is not auto-loaded. On modular kernels you might need "
4587 "to use the following command to load it explicitly before use:"
4591 #: build/C/man4/cpuid.4:84
4593 msgid " $ I<modprobe cpuid>\n"
4597 #: build/C/man4/cpuid.4:87
4599 "There is no support for CPUID functions that require additional input "
4604 #: build/C/man4/cpuid.4:89
4605 msgid "Very old x86 CPUs don't support CPUID."
4609 #: build/C/man4/cpuid.4:93
4611 "Intel Corporation, Intel 64 and IA-32 Architectures Software Developer's "
4612 "Manual Volume 2A: Instruction Set Reference, A-M, 3-180 CPUID reference."
4616 #: build/C/man4/cpuid.4:96
4618 "Intel Corporation, Intel Processor Identification and the CPUID Instruction, "
4619 "Application note 485."
4623 #: build/C/man4/dsp56k.4:27
4629 #: build/C/man4/dsp56k.4:30
4630 msgid "dsp56k - DSP56001 interface device"
4634 #: build/C/man4/dsp56k.4:33
4636 msgid "#include E<lt>asm/dsp56k.hE<gt>\n"
4640 #: build/C/man4/dsp56k.4:36
4643 "B<ssize_t read(int >I<fd>B<, void *>I<data>B<, size_t >I<length>B<);>\n"
4644 "B<ssize_t write(int >I<fd>B<, void *>I<data>B<, size_t >I<length>B<);>\n"
4648 #: build/C/man4/dsp56k.4:42
4651 "B<int ioctl(int >I<fd>B<, DSP56K_UPLOAD, struct dsp56k_upload "
4652 "*>I<program>B<);>\n"
4653 "B<int ioctl(int >I<fd>B<, DSP56K_SET_TX_WSIZE, int >I<wsize>B<);>\n"
4654 "B<int ioctl(int >I<fd>B<, DSP56K_SET_RX_WSIZE, int >I<wsize>B<);>\n"
4655 "B<int ioctl(int >I<fd>B<, DSP56K_HOST_FLAGS, struct dsp56k_host_flags "
4657 "B<int ioctl(int >I<fd>B<, DSP56K_HOST_CMD, int >I<cmd>B<);>\n"
4661 #: build/C/man4/dsp56k.4:43 build/C/man4/fd.4:31 build/C/man4/full.4:29 build/C/man4/initrd.4:38 build/C/man4/lp.4:32 build/C/man4/mouse.4:29 build/C/man4/sd.4:34
4663 msgid "CONFIGURATION"
4667 #: build/C/man4/dsp56k.4:46
4669 "The dsp56k device is a character device with major number 55 and minor "
4674 #: build/C/man4/dsp56k.4:52
4676 "The Motorola DSP56001 is a fully programmable 24-bit digital signal "
4677 "processor found in Atari Falcon030-compatible computers. The I<dsp56k> "
4678 "special file is used to control the DSP56001, and to send and receive data "
4679 "using the bidirectional handshaked host port."
4683 #: build/C/man4/dsp56k.4:62
4685 "To send a data stream to the signal processor, use B<write>(2) to the "
4686 "device, and B<read>(2) to receive processed data. The data can be sent or "
4687 "received in 8, 16, 24, or 32-bit quantities on the host side, but will "
4688 "always be seen as 24-bit quantities in the DSP56001."
4692 #: build/C/man4/dsp56k.4:67
4693 msgid "The following B<ioctl>(2) calls are used to control the I<dsp56k> device:"
4697 #: build/C/man4/dsp56k.4:67
4699 msgid "B<DSP56K_UPLOAD>"
4703 #: build/C/man4/dsp56k.4:74
4705 "resets the DSP56001 and uploads a program. The third B<ioctl>(2) argument "
4706 "must be a pointer to a I<struct dsp56k_binary> with members I<bin> pointing "
4707 "to a DSP56001 binary program, and I<len> set to the length of the program, "
4708 "counted in 24-bit words."
4712 #: build/C/man4/dsp56k.4:74
4714 msgid "B<DSP56K_SET_TX_WSIZE>"
4718 #: build/C/man4/dsp56k.4:82
4720 "sets the transmit word size. Allowed values are in the range 1 to 4, and is "
4721 "the number of bytes that will be sent at a time to the DSP56001. These data "
4722 "quantities will either be padded with zero bytes, or truncated to fit the "
4723 "native 24-bit data format of the DSP56001."
4727 #: build/C/man4/dsp56k.4:82
4729 msgid "B<DSP56K_SET_RX_WSIZE>"
4733 #: build/C/man4/dsp56k.4:89
4735 "sets the receive word size. Allowed values are in the range 1 to 4, and is "
4736 "the number of bytes that will be received at a time from the DSP56001. "
4737 "These data quantities will either truncated, or padded with a null byte "
4738 "(\\(aq\\e0\\(aq) to fit the native 24-bit data format of the DSP56001."
4742 #: build/C/man4/dsp56k.4:89
4744 msgid "B<DSP56K_HOST_FLAGS>"
4748 #: build/C/man4/dsp56k.4:96
4750 "read and write the host flags. The host flags are four general-purpose bits "
4751 "that can be read by both the hosting computer and the DSP56001. Bits 0 and "
4752 "1 can be written by the host, and bits 2 and 3 can be written by the "
4757 #: build/C/man4/dsp56k.4:106
4759 "To access the host flags, the third B<ioctl>(2) argument must be a pointer "
4760 "to a I<struct dsp56k_host_flags>. If bit 0 or 1 is set in the I<dir> "
4761 "member, the corresponding bit in I<out> will be written to the host flags. "
4762 "The state of all host flags will be returned in the lower four bits of the "
4767 #: build/C/man4/dsp56k.4:106
4769 msgid "B<DSP56K_HOST_CMD>"
4773 #: build/C/man4/dsp56k.4:110
4775 "sends a host command. Allowed values are in the range 0 to 31, and is a "
4776 "user-defined command handled by the program running in the DSP56001."
4780 #. Fredrik Noring <noring@nocrew.org>, lars brinkhoff <lars@nocrew.org>,
4781 #. Tomas Berndtsson <tomas@nocrew.org>.
4783 #: build/C/man4/dsp56k.4:115
4788 #: build/C/man4/dsp56k.4:121
4790 "I<linux/include/asm-m68k/dsp56k.h>, I<linux/drivers/char/dsp56k.c>, E<.UR "
4791 "http://dsp56k.nocrew.org/> E<.UE ,> DSP56000/DSP56001 Digital Signal "
4792 "Processor User's Manual"
4796 #: build/C/man4/fd.4:28
4802 #: build/C/man4/fd.4:28
4808 #: build/C/man4/fd.4:31
4809 msgid "fd - floppy disk device"
4813 #: build/C/man4/fd.4:48
4815 "Floppy drives are block devices with major number 2. Typically they are "
4816 "owned by I<root.floppy> (i.e., user root, group floppy) and have either mode "
4817 "0660 (access checking via group membership) or mode 0666 (everybody has "
4818 "access). The minor numbers encode the device type, drive number, and "
4819 "controller number. For each device type (that is, combination of density "
4820 "and track count) there is a base minor number. To this base number, add "
4821 "the drive's number on its controller and 128 if the drive is on the "
4822 "secondary controller. In the following device tables, I<n> represents the "
4827 #: build/C/man4/fd.4:55
4829 "B<Warning: If you use formats with more tracks than supported by your drive, "
4830 "you may cause it mechanical damage.> Trying once if more tracks than the "
4831 "usual 40/80 are supported should not damage it, but no warranty is given for "
4832 "that. If you are not sure, don't create device entries for those formats, "
4833 "so as to prevent their usage."
4837 #: build/C/man4/fd.4:58
4839 "Drive-independent device files which automatically detect the media format "
4844 #: build/C/man4/fd.4:60
4846 msgid "Name\tBase minor #\n"
4850 #: build/C/man4/fd.4:61 build/C/man4/fd.4:69 build/C/man4/fd.4:77 build/C/man4/fd.4:93 build/C/man4/fd.4:105 build/C/man4/fd.4:124
4856 #: build/C/man4/fd.4:62
4858 msgid "B<fd>I<n>\t0\n"
4862 #: build/C/man4/fd.4:66
4863 msgid "5.25 inch double density device files:"
4867 #: build/C/man4/fd.4:68 build/C/man4/fd.4:76 build/C/man4/fd.4:92 build/C/man4/fd.4:104 build/C/man4/fd.4:123
4869 msgid "Name\tCapac.\tCyl.\tSect.\tHeads\tBase minor #\n"
4873 #: build/C/man4/fd.4:70
4875 msgid "B<fd>I<n>B<d360>\t360K\t40\t9\t2\t4\n"
4879 #: build/C/man4/fd.4:74
4880 msgid "5.25 inch high density device files:"
4884 #: build/C/man4/fd.4:78
4886 msgid "B<fd>I<n>B<h360>\t360K\t40\t9\t2\t20\n"
4890 #: build/C/man4/fd.4:79
4892 msgid "B<fd>I<n>B<h410>\t410K\t41\t10\t2\t48\n"
4896 #: build/C/man4/fd.4:80
4898 msgid "B<fd>I<n>B<h420>\t420K\t42\t10\t2\t64\n"
4902 #: build/C/man4/fd.4:81
4904 msgid "B<fd>I<n>B<h720>\t720K\t80\t9\t2\t24\n"
4908 #: build/C/man4/fd.4:82
4910 msgid "B<fd>I<n>B<h880>\t880K\t80\t11\t2\t80\n"
4914 #: build/C/man4/fd.4:83
4916 msgid "B<fd>I<n>B<h1200>\t1200K\t80\t15\t2\t8\n"
4920 #: build/C/man4/fd.4:84
4922 msgid "B<fd>I<n>B<h1440>\t1440K\t80\t18\t2\t40\n"
4926 #: build/C/man4/fd.4:85
4928 msgid "B<fd>I<n>B<h1476>\t1476K\t82\t18\t2\t56\n"
4932 #: build/C/man4/fd.4:86
4934 msgid "B<fd>I<n>B<h1494>\t1494K\t83\t18\t2\t72\n"
4938 #: build/C/man4/fd.4:87
4940 msgid "B<fd>I<n>B<h1600>\t1600K\t80\t20\t2\t92\n"
4944 #: build/C/man4/fd.4:90
4945 msgid "3.5 inch double density device files:"
4949 #: build/C/man4/fd.4:94
4951 msgid "B<fd>I<n>B<D360>\t360K\t80\t9\t1\t12\n"
4955 #: build/C/man4/fd.4:95
4957 msgid "B<fd>I<n>B<D720>\t720K\t80\t9\t2\t16\n"
4961 #: build/C/man4/fd.4:96
4963 msgid "B<fd>I<n>B<D800>\t800K\t80\t10\t2\t120\n"
4967 #: build/C/man4/fd.4:97
4969 msgid "B<fd>I<n>B<D1040>\t1040K\t80\t13\t2\t84\n"
4973 #: build/C/man4/fd.4:98
4975 msgid "B<fd>I<n>B<D1120>\t1120K\t80\t14\t2\t88\n"
4979 #: build/C/man4/fd.4:102
4980 msgid "3.5 inch high density device files:"
4984 #: build/C/man4/fd.4:106
4986 msgid "B<fd>I<n>B<H360>\t360K\t40\t9\t2\t12\n"
4990 #: build/C/man4/fd.4:107
4992 msgid "B<fd>I<n>B<H720>\t720K\t80\t9\t2\t16\n"
4996 #: build/C/man4/fd.4:108
4998 msgid "B<fd>I<n>B<H820>\t820K\t82\t10\t2\t52\n"
5002 #: build/C/man4/fd.4:109
5004 msgid "B<fd>I<n>B<H830>\t830K\t83\t10\t2\t68\n"
5008 #: build/C/man4/fd.4:110
5010 msgid "B<fd>I<n>B<H1440>\t1440K\t80\t18\t2\t28\n"
5014 #: build/C/man4/fd.4:111
5016 msgid "B<fd>I<n>B<H1600>\t1600K\t80\t20\t2\t124\n"
5020 #: build/C/man4/fd.4:112
5022 msgid "B<fd>I<n>B<H1680>\t1680K\t80\t21\t2\t44\n"
5026 #: build/C/man4/fd.4:113
5028 msgid "B<fd>I<n>B<H1722>\t1722K\t82\t21\t2\t60\n"
5032 #: build/C/man4/fd.4:114
5034 msgid "B<fd>I<n>B<H1743>\t1743K\t83\t21\t2\t76\n"
5038 #: build/C/man4/fd.4:115
5040 msgid "B<fd>I<n>B<H1760>\t1760K\t80\t22\t2\t96\n"
5044 #: build/C/man4/fd.4:116
5046 msgid "B<fd>I<n>B<H1840>\t1840K\t80\t23\t2\t116\n"
5050 #: build/C/man4/fd.4:117
5052 msgid "B<fd>I<n>B<H1920>\t1920K\t80\t24\t2\t100\n"
5056 #: build/C/man4/fd.4:121
5057 msgid "3.5 inch extra density device files:"
5061 #: build/C/man4/fd.4:125
5063 msgid "B<fd>I<n>B<E2880>\t2880K\t80\t36\t2\t32\n"
5067 #: build/C/man4/fd.4:126
5069 msgid "B<fd>I<n>B<CompaQ>\t2880K\t80\t36\t2\t36\n"
5073 #: build/C/man4/fd.4:127
5075 msgid "B<fd>I<n>B<E3200>\t3200K\t80\t40\t2\t104\n"
5079 #: build/C/man4/fd.4:128
5081 msgid "B<fd>I<n>B<E3520>\t3520K\t80\t44\t2\t108\n"
5085 #: build/C/man4/fd.4:129
5087 msgid "B<fd>I<n>B<E3840>\t3840K\t80\t48\t2\t112\n"
5091 #: build/C/man4/fd.4:136
5093 "B<fd> special files access the floppy disk drives in raw mode. The "
5094 "following B<ioctl>(2) calls are supported by B<fd> devices:"
5098 #: build/C/man4/fd.4:136
5104 #: build/C/man4/fd.4:138
5105 msgid "clears the media information of a drive (geometry of disk in drive)."
5109 #: build/C/man4/fd.4:138
5115 #: build/C/man4/fd.4:142
5117 "sets the media information of a drive. The media information will be lost "
5118 "when the media is changed."
5122 #: build/C/man4/fd.4:142
5128 #: build/C/man4/fd.4:148
5130 "sets the media information of a drive (geometry of disk in drive). The "
5131 "media information will not be lost when the media is changed. This will "
5132 "disable autodetection. In order to reenable autodetection, you have to "
5133 "issue an B<FDCLRPRM>."
5137 #: build/C/man4/fd.4:148 build/C/man4/fd.4:160
5139 msgid "B<FDGETDRVTYP>"
5143 #: build/C/man4/fd.4:153
5145 "returns the type of a drive (name parameter). For formats which work in "
5146 "several drive types, B<FDGETDRVTYP> returns a name which is appropriate for "
5147 "the oldest drive type which supports this format."
5151 #: build/C/man4/fd.4:153
5157 #: build/C/man4/fd.4:155
5158 msgid "invalidates the buffer cache for the given drive."
5162 #: build/C/man4/fd.4:155 build/C/man4/fd.4:158
5164 msgid "B<FDSETMAXERRS>"
5168 #: build/C/man4/fd.4:158
5170 "sets the error thresholds for reporting errors, aborting the operation, "
5171 "recalibrating, resetting, and reading sector by sector."
5175 #: build/C/man4/fd.4:160
5176 msgid "gets the current error thresholds."
5180 #: build/C/man4/fd.4:162
5181 msgid "gets the internal name of the drive."
5185 #: build/C/man4/fd.4:162
5187 msgid "B<FDWERRORCLR>"
5191 #: build/C/man4/fd.4:164
5192 msgid "clears the write error statistics."
5196 #: build/C/man4/fd.4:164
5198 msgid "B<FDWERRORGET>"
5202 #: build/C/man4/fd.4:171
5204 "reads the write error statistics. These include the total number of write "
5205 "errors, the location and disk of the first write error, and the location and "
5206 "disk of the last write error. Disks are identified by a generation number "
5207 "which is incremented at (almost) each disk change."
5211 #: build/C/man4/fd.4:171
5213 msgid "B<FDTWADDLE>"
5217 #: build/C/man4/fd.4:175
5219 "Switch the drive motor off for a few microseconds. This might be needed in "
5220 "order to access a disk whose sectors are too close together."
5224 #: build/C/man4/fd.4:175
5226 msgid "B<FDSETDRVPRM>"
5230 #: build/C/man4/fd.4:177
5231 msgid "sets various drive parameters."
5235 #: build/C/man4/fd.4:177
5237 msgid "B<FDGETDRVPRM>"
5241 #: build/C/man4/fd.4:179
5242 msgid "reads these parameters back."
5246 #: build/C/man4/fd.4:179
5248 msgid "B<FDGETDRVSTAT>"
5252 #: build/C/man4/fd.4:181
5253 msgid "gets the cached drive state (disk changed, write protected et al.)"
5257 #: build/C/man4/fd.4:181
5259 msgid "B<FDPOLLDRVSTAT>"
5263 #: build/C/man4/fd.4:183
5264 msgid "polls the drive and return its state."
5268 #: build/C/man4/fd.4:183
5270 msgid "B<FDGETFDCSTAT>"
5274 #: build/C/man4/fd.4:185
5275 msgid "gets the floppy controller state."
5279 #: build/C/man4/fd.4:185
5285 #: build/C/man4/fd.4:187
5286 msgid "resets the floppy controller under certain conditions."
5290 #: build/C/man4/fd.4:187
5296 #: build/C/man4/fd.4:189
5297 msgid "sends a raw command to the floppy controller."
5301 #: build/C/man4/fd.4:194
5303 "For more precise information, consult also the I<E<lt>linux/fd.hE<gt>> and "
5304 "I<E<lt>linux/fdreg.hE<gt>> include files, as well as the B<floppycontrol>(1) "
5309 #: build/C/man4/fd.4:196
5314 #: build/C/man4/fd.4:202
5316 "The various formats permit reading and writing many types of disks. "
5317 "However, if a floppy is formatted with an inter-sector gap that is too "
5318 "small, performance may drop, to the point of needing a few seconds to access "
5319 "an entire track. To prevent this, use interleaved formats."
5323 #: build/C/man4/fd.4:206
5325 "It is not possible to read floppies which are formatted using GCR (group "
5326 "code recording), which is used by Apple II and Macintosh computers (800k "
5331 #. Alain Knaff (Alain.Knaff@imag.fr), David Niemi
5332 #. (niemidc@clark.net), Bill Broadhurst (bbroad@netcom.com).
5334 #: build/C/man4/fd.4:213
5336 "Reading floppies which are hard sectored (one hole per sector, with the "
5337 "index hole being a little skewed) is not supported. This used to be common "
5338 "with older 8-inch floppies."
5342 #: build/C/man4/fd.4:221
5344 "B<chown>(1), B<floppycontrol>(1), B<getfdprm>(1), B<mknod>(1), "
5345 "B<superformat>(1), B<mount>(8), B<setfdprm>(8)"
5349 #: build/C/man7/fifo.7:13
5355 #: build/C/man7/fifo.7:13
5361 #: build/C/man7/fifo.7:16
5362 msgid "fifo - first-in first-out special file, named pipe"
5366 #: build/C/man7/fifo.7:28
5368 "A FIFO special file (a named pipe) is similar to a pipe, except that it is "
5369 "accessed as part of the filesystem. It can be opened by multiple processes "
5370 "for reading or writing. When processes are exchanging data via the FIFO, "
5371 "the kernel passes all data internally without writing it to the filesystem. "
5372 "Thus, the FIFO special file has no contents on the filesystem; the "
5373 "filesystem entry merely serves as a reference point so that processes can "
5374 "access the pipe using a name in the filesystem."
5378 #: build/C/man7/fifo.7:35
5380 "The kernel maintains exactly one pipe object for each FIFO special file that "
5381 "is opened by at least one process. The FIFO must be opened on both ends "
5382 "(reading and writing) before data can be passed. Normally, opening the "
5383 "FIFO blocks until the other end is opened also."
5387 #: build/C/man7/fifo.7:44
5389 "A process can open a FIFO in nonblocking mode. In this case, opening for "
5390 "read-only will succeed even if no-one has opened on the write side yet, "
5391 "opening for write-only will fail with B<ENXIO> (no such device or address) "
5392 "unless the other end has already been opened."
5396 #: build/C/man7/fifo.7:54
5398 "Under Linux, opening a FIFO for read and write will succeed both in blocking "
5399 "and nonblocking mode. POSIX leaves this behavior undefined. This can be "
5400 "used to open a FIFO for writing while there are no readers available. A "
5401 "process that uses both ends of the connection in order to communicate with "
5402 "itself should be very careful to avoid deadlocks."
5406 #: build/C/man7/fifo.7:59
5408 "When a process tries to write to a FIFO that is not opened for read on the "
5409 "other side, the process is sent a B<SIGPIPE> signal."
5413 #: build/C/man7/fifo.7:65
5415 "FIFO special files can be created by B<mkfifo>(3), and are indicated by I<ls "
5416 "-l> with the file type \\(aqp\\(aq."
5420 #: build/C/man7/fifo.7:74
5422 "B<mkfifo>(1), B<open>(2), B<pipe>(2), B<sigaction>(2), B<signal>(2), "
5423 "B<socketpair>(2), B<mkfifo>(3), B<pipe>(7)"
5427 #: build/C/man4/full.4:26
5433 #: build/C/man4/full.4:26
5439 #: build/C/man4/full.4:29
5440 msgid "full - always full device"
5444 #: build/C/man4/full.4:34
5446 "If your system does not have I</dev/full> created already, it can be created "
5447 "with the following commands:"
5451 #: build/C/man4/full.4:38
5454 " mknod -m 666 /dev/full c 1 7\n"
5455 " chown root:root /dev/full\n"
5459 #: build/C/man4/full.4:44
5460 msgid "File I</dev/full> has major device number 1 and minor device number 7."
5464 #: build/C/man4/full.4:51
5466 "Writes to the I</dev/full> device will fail with an B<ENOSPC> error. This "
5467 "can be used to test how a program handles disk-full errors."
5471 #: build/C/man4/full.4:55
5472 msgid "Reads from the I</dev/full> device will return \\e0 characters."
5476 #: build/C/man4/full.4:59
5477 msgid "Seeks on I</dev/full> will always succeed."
5481 #: build/C/man4/full.4:61
5486 #: build/C/man4/full.4:65
5487 msgid "B<mknod>(1), B<null>(4), B<zero>(4)"
5491 #: build/C/man3/gnu_get_libc_version.3:26
5493 msgid "GNU_GET_LIBC_VERSION"
5497 #: build/C/man3/gnu_get_libc_version.3:26
5503 #: build/C/man3/gnu_get_libc_version.3:29
5504 msgid "gnu_get_libc_version, gnu_get_libc_release - get glibc version and release"
5508 #: build/C/man3/gnu_get_libc_version.3:32
5510 msgid "B<#include E<lt>gnu/libc-version.hE<gt>>\n"
5514 #: build/C/man3/gnu_get_libc_version.3:35
5517 "B<const char *gnu_get_libc_version(void);>\n"
5518 "B<const char *gnu_get_libc_release(void);>\n"
5522 #: build/C/man3/gnu_get_libc_version.3:40
5524 "The function B<gnu_get_libc_version>() returns a string that identifies the "
5525 "glibc version available on the system."
5529 #: build/C/man3/gnu_get_libc_version.3:47
5531 "The function B<gnu_get_libc_release>() returns a string indicates the "
5532 "release status of the glibc version available on the system. This will be a "
5533 "string such as I<stable>."
5537 #: build/C/man3/gnu_get_libc_version.3:47 build/C/man3/mkfifo.3:178 build/C/man2/mknod.2:240 build/C/man4/vcs.4:99
5543 #: build/C/man3/gnu_get_libc_version.3:49
5544 msgid "These functions first appeared in glibc in version 2.1."
5548 #: build/C/man3/gnu_get_libc_version.3:49 build/C/man3/makedev.3:62 build/C/man3/mkfifo.3:191 build/C/man2/mknod.2:244 build/C/man3/setlogmask.3:75 build/C/man3/stdarg.3:238 build/C/man2/syslog.2:298 build/C/man3/syslog.3:252 build/C/man7/uri.7:584
5550 msgid "CONFORMING TO"
5554 #: build/C/man3/gnu_get_libc_version.3:51
5555 msgid "These functions are glibc-specific."
5559 #: build/C/man3/gnu_get_libc_version.3:53
5560 msgid "When run, the program below will produce output such as the following:"
5564 #: build/C/man3/gnu_get_libc_version.3:59
5568 "GNU libc version: 2.8\n"
5569 "GNU libc release: stable\n"
5573 #: build/C/man3/gnu_get_libc_version.3:67
5576 "#include E<lt>gnu/libc-version.hE<gt>\n"
5577 "#include E<lt>stdlib.hE<gt>\n"
5578 "#include E<lt>stdio.hE<gt>\n"
5582 #: build/C/man3/gnu_get_libc_version.3:75
5586 "main(int argc, char *argv[])\n"
5588 " printf(\"GNU libc version: %s\\en\", gnu_get_libc_version());\n"
5589 " printf(\"GNU libc release: %s\\en\", gnu_get_libc_release());\n"
5590 " exit(EXIT_SUCCESS);\n"
5595 #: build/C/man3/gnu_get_libc_version.3:78
5596 msgid "B<confstr>(3)"
5600 #: build/C/man4/hd.4:29
5606 #: build/C/man4/hd.4:29
5612 #: build/C/man4/hd.4:32
5613 msgid "hd - MFM/IDE hard disk devices"
5617 #: build/C/man4/hd.4:47
5619 "The B<hd*> devices are block devices to access MFM/IDE hard disk drives in "
5620 "raw mode. The master drive on the primary IDE controller (major device "
5621 "number 3) is B<hda>; the slave drive is B<hdb>. The master drive of the "
5622 "second controller (major device number 22) is B<hdc> and the slave B<hdd>."
5626 #: build/C/man4/hd.4:71
5628 "General IDE block device names have the form B<hd>I<X>, or B<hd>I<XP>, where "
5629 "I<X> is a letter denoting the physical drive, and I<P> is a number denoting "
5630 "the partition on that physical drive. The first form, B<hd>I<X,> is used to "
5631 "address the whole drive. Partition numbers are assigned in the order the "
5632 "partitions are discovered, and only nonempty, nonextended partitions get a "
5633 "number. However, partition numbers 1-4 are given to the four partitions "
5634 "described in the MBR (the \"primary\" partitions), regardless of whether "
5635 "they are unused or extended. Thus, the first logical partition will be "
5636 "B<hd>I<X>B<5>\\&. Both DOS-type partitioning and BSD-disklabel partitioning "
5637 "are supported. You can have at most 63 partitions on an IDE disk."
5641 #: build/C/man4/hd.4:77
5643 "For example, I</dev/hda> refers to all of the first IDE drive in the system; "
5644 "and I</dev/hdb3> refers to the third DOS \"primary\" partition on the second "
5649 #: build/C/man4/hd.4:79 build/C/man4/ttyS.4:34
5650 msgid "They are typically created by:"
5654 #: build/C/man4/hd.4:82
5655 msgid "mknod -m 660 /dev/hda b 3 0"
5659 #: build/C/man4/hd.4:84
5660 msgid "mknod -m 660 /dev/hda1 b 3 1"
5664 #: build/C/man4/hd.4:86
5665 msgid "mknod -m 660 /dev/hda2 b 3 2"
5669 #: build/C/man4/hd.4:88 build/C/man4/hd.4:98
5674 #: build/C/man4/hd.4:90
5675 msgid "mknod -m 660 /dev/hda8 b 3 8"
5679 #: build/C/man4/hd.4:92
5680 msgid "mknod -m 660 /dev/hdb b 3 64"
5684 #: build/C/man4/hd.4:94
5685 msgid "mknod -m 660 /dev/hdb1 b 3 65"
5689 #: build/C/man4/hd.4:96
5690 msgid "mknod -m 660 /dev/hdb2 b 3 66"
5694 #: build/C/man4/hd.4:100
5695 msgid "mknod -m 660 /dev/hdb8 b 3 72"
5699 #: build/C/man4/hd.4:102
5700 msgid "chown root:disk /dev/hd*"
5704 #: build/C/man4/hd.4:105
5709 #: build/C/man4/hd.4:110
5710 msgid "B<chown>(1), B<mknod>(1), B<sd>(4), B<mount>(8)"
5714 #: build/C/man4/hpsa.4:10
5720 #: build/C/man4/hpsa.4:13
5721 msgid "hpsa - HP Smart Array SCSI driver"
5725 #: build/C/man4/hpsa.4:16
5727 msgid "modprobe hpsa [ hpsa_allow_any=1 ]\n"
5731 #: build/C/man4/hpsa.4:20
5732 msgid "B<hpsa> is a SCSI driver for HP Smart Array RAID controllers."
5736 #: build/C/man4/hpsa.4:39
5738 "I<hpsa_allow_any=1>: This option allows the driver to attempt to operate on "
5739 "any HP Smart Array hardware RAID controller, even if it is not explicitly "
5740 "known to the driver. This allows newer hardware to work with older "
5741 "drivers. Typically this is used to allow installation of operating systems "
5742 "from media that predates the RAID controller, though it may also be used to "
5743 "enable B<hpsa> to drive older controllers that would normally be handled by "
5744 "the B<cciss>(4) driver. These older boards have not been tested and are "
5745 "not supported with B<hpsa>, and B<cciss>(4) should still be used for these."
5749 #: build/C/man4/hpsa.4:43
5750 msgid "The B<hpsa> driver supports the following Smart Array boards:"
5754 #: build/C/man4/hpsa.4:54
5757 " Smart Array P700M\n"
5758 " Smart Array P212\n"
5759 " Smart Array P410\n"
5760 " Smart Array P410i\n"
5761 " Smart Array P411\n"
5762 " Smart Array P812\n"
5763 " Smart Array P712m\n"
5764 " Smart Array P711m\n"
5765 " StorageWorks P1210m\n"
5769 #: build/C/man4/hpsa.4:78
5771 "Logical drives are accessed via the SCSI disk driver (B<sd>(4)), tape drives "
5772 "via the SCSI tape driver (B<st>(4)), and the RAID controller via the SCSI "
5773 "generic driver (B<sg>(4)), with device nodes named I</dev/sd*>, I</dev/st*>, "
5774 "and I</dev/sg*>, respectively."
5778 #: build/C/man4/hpsa.4:78
5780 msgid "HPSA-specific host attribute files in /sys"
5784 #: build/C/man4/hpsa.4:79
5786 msgid "I</sys/class/scsi_host/host*/rescan>"
5790 #: build/C/man4/hpsa.4:93
5792 "This is a write-only attribute. Writing to this attribute will cause the "
5793 "driver to scan for new, changed, or removed devices (e.g,. hot-plugged tape "
5794 "drives, or newly configured or deleted logical drives, etc.) and notify the "
5795 "SCSI midlayer of any changes detected. Normally a rescan is triggered "
5796 "automatically by HP's Array Configuration Utility (either the GUI or the "
5797 "command-line variety); thus, for logical drive changes, the user should not "
5798 "normally have to use this attribute. This attribute may be useful when hot "
5799 "plugging devices like tape drives, or entire storage boxes containing "
5800 "preconfigured logical drives."
5804 #: build/C/man4/hpsa.4:93
5806 msgid "I</sys/class/scsi_host/host*/firmware_revision>"
5810 #: build/C/man4/hpsa.4:96
5811 msgid "This attribute contains the firmware version of the Smart Array."
5815 #: build/C/man4/hpsa.4:98
5816 msgid "For example:"
5820 #: build/C/man4/hpsa.4:103
5823 " # B<cd /sys/class/scsi_host/host4>\n"
5824 " # B<cat firmware_revision>\n"
5829 #: build/C/man4/hpsa.4:104
5831 msgid "HPSA-specific disk attribute files in /sys"
5835 #: build/C/man4/hpsa.4:105
5837 msgid "I</sys/class/scsi_disk/c:b:t:l/device/unique_id>"
5841 #: build/C/man4/hpsa.4:108
5842 msgid "This attribute contains a 32 hex-digit unique ID for each logical drive."
5846 #: build/C/man4/hpsa.4:111 build/C/man4/hpsa.4:122 build/C/man4/hpsa.4:136
5848 msgid "For example:\n"
5852 #: build/C/man4/hpsa.4:115
5855 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5856 " # B<cat unique_id>\n"
5857 " 600508B1001044395355323037570F77\n"
5861 #: build/C/man4/hpsa.4:116
5863 msgid "I</sys/class/scsi_disk/c:b:t:l/device/raid_level>"
5867 #: build/C/man4/hpsa.4:119
5868 msgid "This attribute contains the RAID level of each logical drive."
5872 #: build/C/man4/hpsa.4:126
5875 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5876 " # B<cat raid_level>\n"
5881 #: build/C/man4/hpsa.4:127
5883 msgid "I</sys/class/scsi_disk/c:b:t:l/device/lunid>"
5887 #: build/C/man4/hpsa.4:133
5889 "This attribute contains the 16 hex-digit (8 byte) LUN ID by which a logical "
5890 "drive or physical device can be addressed. I<c>:I<b>:I<t>:I<l> are the "
5891 "controller, bus, target, and lun of the device."
5895 #: build/C/man4/hpsa.4:140
5898 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5900 " 0x0000004000000000\n"
5904 #: build/C/man4/hpsa.4:141
5906 msgid "Supported ioctl() operations"
5910 #: build/C/man4/hpsa.4:153
5912 "For compatibility with applications written for the B<cciss>(4) driver, "
5913 "many, but not all of the ioctls supported by the B<cciss>(4) driver are "
5914 "also supported by the B<hpsa> driver. The data structures used by these "
5915 "ioctls are described in the Linux kernel source file "
5916 "I<include/linux/cciss_ioctl.h>."
5920 #: build/C/man4/hpsa.4:153
5922 msgid "B<CCISS_DEREGDISK>, B<CCISS_REGNEWDISK>, B<CCISS_REGNEWD>"
5926 #: build/C/man4/hpsa.4:159
5928 "These three ioctls all do exactly the same thing, which is to cause the "
5929 "driver to rescan for new devices. This does exactly the same thing as "
5930 "writing to the hpsa-specific host \"rescan\" attribute."
5934 #: build/C/man4/hpsa.4:159
5936 msgid "B<CCISS_GETPCIINFO>"
5940 #: build/C/man4/hpsa.4:162
5942 "Returns PCI domain, bus, device and function and \"board ID\" (PCI subsystem "
5947 #: build/C/man4/hpsa.4:162
5949 msgid "B<CCISS_GETDRIVVER>"
5953 #: build/C/man4/hpsa.4:165
5954 msgid "Returns driver version in three bytes encoded as:"
5958 #: build/C/man4/hpsa.4:168
5961 " (major_version E<lt>E<lt> 16) | (minor_version E<lt>E<lt> 8) |\n"
5962 " (subminor_version)\n"
5966 #: build/C/man4/hpsa.4:168
5968 msgid "B<CCISS_PASSTHRU>, B<CCISS_BIG_PASSTHRU>"
5972 #: build/C/man4/hpsa.4:179
5974 "Allows \"BMIC\" and \"CISS\" commands to be passed through to the Smart "
5975 "Array. These are used extensively by the HP Array Configuration Utility, "
5976 "SNMP storage agents, and so on. See I<cciss_vol_status> at E<.UR "
5977 "http://cciss.sf.net> E<.UE> for some examples."
5981 #: build/C/man4/hpsa.4:186
5983 "B<cciss>(4), B<sd>(4), B<st>(4), B<cciss_vol_status>(8), B<hpacucli>(8), "
5988 #. Don Brace, Steve Cameron, Tom Lawler, Mike Miller, Scott Teel
5989 #. and probably some other people.
5991 #: build/C/man4/hpsa.4:197
5993 "E<.UR http://cciss.sf.net> E<.UE ,> and I<Documentation/scsi/hpsa.txt> and "
5994 "I<Documentation/ABI/testing/sysfs-bus-pci-devices-cciss> in the Linux kernel "
5999 #: build/C/man4/initrd.4:35
6005 #: build/C/man4/initrd.4:35 build/C/man4/st.4:25
6011 #: build/C/man4/initrd.4:38
6012 msgid "initrd - boot loader initialized RAM disk"
6016 #: build/C/man4/initrd.4:51
6018 "The I</dev/initrd> is a read-only block device assigned major number 1 and "
6019 "minor number 250. Typically I</dev/initrd> is owned by I<root.disk> with "
6020 "mode 0400 (read access by root only). If the Linux system does not have "
6021 "I</dev/initrd> already created, it can be created with the following "
6026 #: build/C/man4/initrd.4:56
6030 " mknod -m 400 /dev/initrd b 1 250\n"
6031 " chown root:disk /dev/initrd>\n"
6036 #: build/C/man4/initrd.4:71
6038 "Also, support for both \"RAM disk\" and \"Initial RAM disk\" (e.g., "
6039 "B<CONFIG_BLK_DEV_RAM=y> and B<CONFIG_BLK_DEV_INITRD=y>) must be compiled "
6040 "directly into the Linux kernel to use I</dev/initrd>. When using "
6041 "I</dev/initrd>, the RAM disk driver cannot be loaded as a module."
6045 #: build/C/man4/initrd.4:80
6047 "The special file I</dev/initrd> is a read-only block device. This device is "
6048 "a RAM disk that is initialized (e.g., loaded) by the boot loader before the "
6049 "kernel is started. The kernel then can use I</dev/initrd>'s contents for a "
6050 "two-phase system boot-up."
6054 #: build/C/man4/initrd.4:93
6056 "In the first boot-up phase, the kernel starts up and mounts an initial root "
6057 "filesystem from the contents of I</dev/initrd> (e.g., RAM disk initialized "
6058 "by the boot loader). In the second phase, additional drivers or other "
6059 "modules are loaded from the initial root device's contents. After loading "
6060 "the additional modules, a new root filesystem (i.e., the normal root "
6061 "filesystem) is mounted from a different device."
6065 #: build/C/man4/initrd.4:93
6067 msgid "Boot-up operation"
6071 #: build/C/man4/initrd.4:97
6072 msgid "When booting up with B<initrd>, the system boots as follows:"
6076 #: build/C/man4/initrd.4:101
6078 "The boot loader loads the kernel program and I</dev/initrd>'s contents into "
6083 #: build/C/man4/initrd.4:109
6085 "On kernel startup, the kernel uncompresses and copies the contents of the "
6086 "device I</dev/initrd> onto device I</dev/ram0> and then frees the memory "
6087 "used by I</dev/initrd>."
6091 #: build/C/man4/initrd.4:109 build/C/man4/initrd.4:339 build/C/man4/initrd.4:458 build/C/man4/st.4:919
6097 #: build/C/man4/initrd.4:113
6099 "The kernel then read-write mounts the device I</dev/ram0> as the initial "
6104 #: build/C/man4/initrd.4:113 build/C/man4/initrd.4:343 build/C/man4/st.4:926
6110 #: build/C/man4/initrd.4:118
6112 "If the indicated normal root filesystem is also the initial root filesystem "
6113 "(e.g., I</dev/ram0>) then the kernel skips to the last step for the usual "
6118 #: build/C/man4/initrd.4:118 build/C/man4/initrd.4:349 build/C/man4/st.4:931
6124 #: build/C/man4/initrd.4:130
6126 "If the executable file I</linuxrc> is present in the initial root "
6127 "filesystem, I</linuxrc> is executed with UID 0. (The file I</linuxrc> must "
6128 "have executable permission. The file I</linuxrc> can be any valid "
6129 "executable, including a shell script.)"
6133 #: build/C/man4/initrd.4:130 build/C/man4/initrd.4:358
6139 #: build/C/man4/initrd.4:142
6141 "If I</linuxrc> is not executed or when I</linuxrc> terminates, the normal "
6142 "root filesystem is mounted. (If I</linuxrc> exits with any filesystems "
6143 "mounted on the initial root filesystem, then the behavior of the kernel is "
6144 "B<UNSPECIFIED>. See the NOTES section for the current kernel behavior.)"
6148 #: build/C/man4/initrd.4:142 build/C/man4/initrd.4:360
6154 #: build/C/man4/initrd.4:173
6156 "If the normal root filesystem has a directory I</initrd>, the device "
6157 "I</dev/ram0> is moved from I</> to I</initrd>. Otherwise if the directory "
6158 "I</initrd> does not exist, the device I</dev/ram0> is unmounted. (When "
6159 "moved from I</> to I</initrd>, I</dev/ram0> is not unmounted and therefore "
6160 "processes can remain running from I</dev/ram0>. If directory I</initrd> "
6161 "does not exist on the normal root filesystem and any processes remain "
6162 "running from I</dev/ram0> when I</linuxrc> exits, the behavior of the kernel "
6163 "is B<UNSPECIFIED>. See the NOTES section for the current kernel behavior.)"
6167 #: build/C/man4/initrd.4:173 build/C/man4/initrd.4:363
6173 #: build/C/man4/initrd.4:180
6175 "The usual boot sequence (e.g., invocation of I</sbin/init>) is performed on "
6176 "the normal root filesystem."
6180 #: build/C/man4/initrd.4:184
6182 "The following boot loader options, when used with B<initrd>, affect the "
6183 "kernel's boot-up operation:"
6187 #: build/C/man4/initrd.4:184
6189 msgid "B<initrd=>I<filename>"
6193 #: build/C/man4/initrd.4:199
6195 "Specifies the file to load as the contents of I</dev/initrd>. For "
6196 "B<LOADLIN> this is a command-line option. For B<LILO> you have to use this "
6197 "command in the B<LILO> configuration file I</etc/lilo.config>. The filename "
6198 "specified with this option will typically be a gzipped filesystem image."
6202 #: build/C/man4/initrd.4:199
6208 #: build/C/man4/initrd.4:214
6210 "This boot option disables the two-phase boot-up operation. The kernel "
6211 "performs the usual boot sequence as if I</dev/initrd> was not initialized. "
6212 "With this option, any contents of I</dev/initrd> loaded into memory by the "
6213 "boot loader contents are preserved. This option permits the contents of "
6214 "I</dev/initrd> to be any data and need not be limited to a filesystem "
6215 "image. However, device I</dev/initrd> is read-only and can be read only one "
6216 "time after system startup."
6220 #: build/C/man4/initrd.4:214
6222 msgid "B<root=>I<device-name>"
6226 #: build/C/man4/initrd.4:232
6228 "Specifies the device to be used as the normal root filesystem. For "
6229 "B<LOADLIN> this is a command-line option. For B<LILO> this is a boot time "
6230 "option or can be used as an option line in the B<LILO> configuration file "
6231 "I</etc/lilo.config>. The device specified by the this option must be a "
6232 "mountable device having a suitable root filesystem."
6236 #: build/C/man4/initrd.4:232
6238 msgid "Changing the normal root filesystem"
6242 #: build/C/man4/initrd.4:252
6244 "By default, the kernel's settings (e.g., set in the kernel file with "
6245 "B<rdev>(8) or compiled into the kernel file), or the boot loader option "
6246 "setting is used for the normal root filesystems. For an NFS-mounted normal "
6247 "root filesystem, one has to use the B<nfs_root_name> and B<nfs_root_addrs> "
6248 "boot options to give the NFS settings. For more information on NFS-mounted "
6249 "root see the kernel documentation file "
6250 "B<Documentation/filesystems/nfsroot.txt>. For more information on setting "
6251 "the root filesystem see also the B<LILO> and B<LOADLIN> documentation."
6255 #: build/C/man4/initrd.4:284
6257 "It is also possible for the I</linuxrc> executable to change the normal root "
6258 "device. For I</linuxrc> to change the normal root device, I</proc> must be "
6259 "mounted. After mounting I</proc>, I</linuxrc> changes the normal root "
6260 "device by writing into the proc files I</proc/sys/kernel/real-root-dev>, "
6261 "I</proc/sys/kernel/nfs-root-name>, and I</proc/sys/kernel/nfs-root-addrs>. "
6262 "For a physical root device, the root device is changed by having I</linuxrc> "
6263 "write the new root filesystem device number into "
6264 "I</proc/sys/kernel/real-root-dev>. For an NFS root filesystem, the root "
6265 "device is changed by having I</linuxrc> write the NFS setting into files "
6266 "I</proc/sys/kernel/nfs-root-name> and I</proc/sys/kernel/nfs-root-addrs> and "
6267 "then writing 0xff (e.g., the pseudo-NFS-device number) into file "
6268 "I</proc/sys/kernel/real-root-dev>. For example, the following shell command "
6269 "line would change the normal root device to I</dev/hdb1>:"
6273 #: build/C/man4/initrd.4:287
6275 msgid " echo 0x365 E<gt>/proc/sys/kernel/real-root-dev\n"
6279 #: build/C/man4/initrd.4:294
6281 "For an NFS example, the following shell command lines would change the "
6282 "normal root device to the NFS directory I</var/nfsroot> on a local networked "
6283 "NFS server with IP number 193.8.232.7 for a system with IP number "
6284 "193.8.232.2 and named \"idefix\":"
6288 #: build/C/man4/initrd.4:300
6291 " echo /var/nfsroot E<gt>/proc/sys/kernel/nfs-root-name\n"
6292 " echo 193.8.232.2:193.8.232.7::255.255.255.0:idefix \\e\n"
6293 " E<gt>/proc/sys/kernel/nfs-root-addrs\n"
6294 " echo 255 E<gt>/proc/sys/kernel/real-root-dev\n"
6297 #. FIXME the manual page should describe the pivot_root mechanism.
6299 #: build/C/man4/initrd.4:317
6301 "B<Note>: The use of I</proc/sys/kernel/real-root-dev> to change the root "
6302 "filesystem is obsolete. See the Linux kernel source file "
6303 "I<Documentation/initrd.txt> as well as B<pivot_root>(2) and "
6304 "B<pivot_root>(8) for information on the modern method of changing the root "
6309 #: build/C/man4/initrd.4:317 build/C/man4/random.4:65 build/C/man7/uri.7:109
6315 #: build/C/man4/initrd.4:321
6317 "The main motivation for implementing B<initrd> was to allow for modular "
6318 "kernel configuration at system installation."
6322 #: build/C/man4/initrd.4:323
6323 msgid "A possible system installation scenario is as follows:"
6327 #: build/C/man4/initrd.4:331
6329 "The loader program boots from floppy or other media with a minimal kernel "
6330 "(e.g., support for I</dev/ram>, I</dev/initrd>, and the ext2 filesystem) and "
6331 "loads I</dev/initrd> with a gzipped version of the initial filesystem."
6335 #: build/C/man4/initrd.4:339
6337 "The executable I</linuxrc> determines what is needed to (1) mount the normal "
6338 "root filesystem (i.e., device type, device drivers, filesystem) and (2) the "
6339 "distribution media (e.g., CD-ROM, network, tape, ...). This can be done by "
6340 "asking the user, by auto-probing, or by using a hybrid approach."
6344 #: build/C/man4/initrd.4:343
6346 "The executable I</linuxrc> loads the necessary modules from the initial root "
6351 #: build/C/man4/initrd.4:349
6353 "The executable I</linuxrc> creates and populates the root filesystem. (At "
6354 "this stage the normal root filesystem does not have to be a completed system "
6359 #: build/C/man4/initrd.4:358
6361 "The executable I</linuxrc> sets I</proc/sys/kernel/real-root-dev>, unmount "
6362 "I</proc>, the normal root filesystem and any other filesystems it has "
6363 "mounted, and then terminates."
6367 #: build/C/man4/initrd.4:360
6368 msgid "The kernel then mounts the normal root filesystem."
6372 #: build/C/man4/initrd.4:363
6374 "Now that the filesystem is accessible and intact, the boot loader can be "
6379 #: build/C/man4/initrd.4:372
6381 "The boot loader is configured to load into I</dev/initrd> a filesystem with "
6382 "the set of modules that was used to bring up the system. (e.g., Device "
6383 "I</dev/ram0> can be modified, then unmounted, and finally, the image is "
6384 "written from I</dev/ram0> to a file.)"
6388 #: build/C/man4/initrd.4:372
6394 #: build/C/man4/initrd.4:375
6396 "The system is now bootable and additional installation tasks can be "
6401 #: build/C/man4/initrd.4:381
6403 "The key role of I</dev/initrd> in the above is to reuse the configuration "
6404 "data during normal system operation without requiring initial kernel "
6405 "selection, a large generic kernel or, recompiling the kernel."
6409 #: build/C/man4/initrd.4:394
6411 "A second scenario is for installations where Linux runs on systems with "
6412 "different hardware configurations in a single administrative network. In "
6413 "such cases, it may be desirable to use only a small set of kernels (ideally "
6414 "only one) and to keep the system-specific part of configuration information "
6415 "as small as possible. In this case, create a common file with all needed "
6416 "modules. Then, only the I</linuxrc> file or a file executed by I</linuxrc> "
6417 "would be different."
6421 #: build/C/man4/initrd.4:401
6423 "A third scenario is more convenient recovery disks. Because information "
6424 "like the location of the root filesystem partition is not needed at boot "
6425 "time, the system loaded from I</dev/initrd> can use a dialog and/or "
6426 "auto-detection followed by a possible sanity check."
6430 #: build/C/man4/initrd.4:418
6432 "Last but not least, Linux distributions on CD-ROM may use B<initrd> for easy "
6433 "installation from the CD-ROM. The distribution can use B<LOADLIN> to "
6434 "directly load I</dev/initrd> from CD-ROM without the need of any floppies. "
6435 "The distribution could also use a B<LILO> boot floppy and then bootstrap a "
6436 "bigger RAM disk via I</dev/initrd> from the CD-ROM."
6440 #: build/C/man4/initrd.4:420
6441 msgid "I</dev/initrd>"
6445 #: build/C/man4/initrd.4:422
6446 msgid "I</dev/ram0>"
6450 #: build/C/man4/initrd.4:424
6455 #: build/C/man4/initrd.4:429
6460 #: build/C/man4/initrd.4:441
6462 "With the current kernel, any filesystems that remain mounted when "
6463 "I</dev/ram0> is moved from I</> to I</initrd> continue to be accessible. "
6464 "However, the I</proc/mounts> entries are not updated."
6468 #: build/C/man4/initrd.4:458
6470 "With the current kernel, if directory I</initrd> does not exist, then "
6471 "I</dev/ram0> will B<not> be fully unmounted if I</dev/ram0> is used by any "
6472 "process or has any filesystem mounted on it. If I</dev/ram0> is B<not> "
6473 "fully unmounted, then I</dev/ram0> will remain in memory."
6480 #. The kernel code for device
6482 #. was written by Werner Almesberger <almesber@lrc.epfl.ch> and
6483 #. Hans Lermen <lermen@elserv.ffm.fgan.de>.
6486 #. was added to the baseline Linux kernel in development version 1.3.73.
6488 #: build/C/man4/initrd.4:474
6490 "Users of I</dev/initrd> should not depend on the behavior give in the above "
6491 "notes. The behavior may change in future versions of the Linux kernel."
6495 #: build/C/man4/initrd.4:480
6496 msgid "B<chown>(1), B<mknod>(1), B<ram>(4), B<freeramdisk>(8), B<rdev>(8)"
6500 #: build/C/man4/initrd.4:484
6502 "I<Documentation/initrd.txt> in the Linux kernel source tree, the LILO "
6503 "documentation, the LOADLIN documentation, the SYSLINUX documentation"
6507 #: build/C/man4/lp.4:27
6513 #: build/C/man4/lp.4:27
6519 #: build/C/man4/lp.4:30
6520 msgid "lp - line printer devices"
6524 #: build/C/man4/lp.4:32
6525 msgid "B<#include E<lt>linux/lp.hE<gt>>"
6529 #: build/C/man4/lp.4:43
6531 "B<lp>[0\\(en2] are character devices for the parallel line printers; they "
6532 "have major number 6 and minor number 0\\(en2. The minor numbers correspond "
6533 "to the printer port base addresses 0x03bc, 0x0378 and 0x0278. Usually they "
6534 "have mode 220 and are owned by root and group lp. You can use printer ports "
6535 "either with polling or with interrupts. Interrupts are recommended when "
6536 "high traffic is expected, for example, for laser printers. For usual dot "
6537 "matrix printers polling will usually be enough. The default is polling."
6541 #: build/C/man4/lp.4:47
6542 msgid "The following B<ioctl>(2) calls are supported:"
6546 #: build/C/man4/lp.4:47
6548 msgid "B<int ioctl(int >I<fd>B<, LPTIME, int >I<arg>B<)>"
6552 #: build/C/man4/lp.4:56
6554 "Sets the amount of time that the driver sleeps before rechecking the printer "
6555 "when the printer's buffer appears to be filled to I<arg>. If you have a "
6556 "fast printer, decrease this number; if you have a slow printer, then "
6557 "increase it. This is in hundredths of a second, the default 2 being 0.02 "
6558 "seconds. It only influences the polling driver."
6562 #: build/C/man4/lp.4:56
6564 msgid "B<int ioctl(int >I<fd>B<, LPCHAR, int >I<arg>B<)>"
6568 #: build/C/man4/lp.4:64
6570 "Sets the maximum number of busy-wait iterations which the polling driver "
6571 "does while waiting for the printer to get ready for receiving a character to "
6572 "I<arg>. If printing is too slow, increase this number; if the system gets "
6573 "too slow, decrease this number. The default is 1000. It only influences "
6574 "the polling driver."
6578 #: build/C/man4/lp.4:64
6580 msgid "B<int ioctl(int >I<fd>B<, LPABORT, int >I<arg>B<)>"
6584 #: build/C/man4/lp.4:70
6586 "If I<arg> is 0, the printer driver will retry on errors, otherwise it will "
6587 "abort. The default is 0."
6591 #: build/C/man4/lp.4:70
6593 msgid "B<int ioctl(int >I<fd>B<, LPABORTOPEN, int >I<arg>B<)>"
6597 #: build/C/man4/lp.4:77
6599 "If I<arg> is 0, B<open>(2) will be aborted on error, otherwise error will "
6600 "be ignored. The default is to ignore it."
6604 #: build/C/man4/lp.4:77
6606 msgid "B<int ioctl(int >I<fd>B<, LPCAREFUL, int >I<arg>B<)>"
6610 #: build/C/man4/lp.4:83
6612 "If I<arg> is 0, then the out-of-paper, offline and error signals are "
6613 "required to be false on all writes, otherwise they are ignored. The default "
6614 "is to ignore them."
6618 #: build/C/man4/lp.4:83
6620 msgid "B<int ioctl(int >I<fd>B<, LPWAIT, int >I<arg>B<)>"
6624 #: build/C/man4/lp.4:94
6626 "Sets the number of busy waiting iterations to wait before strobing the "
6627 "printer to accept a just-written character, and the number of iterations to "
6628 "wait before turning the strobe off again, to I<arg>. The specification says "
6629 "this time should be 0.5 microseconds, but experience has shown the delay "
6630 "caused by the code is already enough. For that reason, the default value is "
6631 "0. This is used for both the polling and the interrupt driver."
6635 #: build/C/man4/lp.4:94
6637 msgid "B<int ioctl(int >I<fd>B<, LPSETIRQ, int >I<arg>B<)>"
6641 #: build/C/man4/lp.4:105
6643 "This B<ioctl>(2) requires superuser privileges. It takes an I<int> "
6644 "containing the new IRQ as argument. As a side effect, the printer will be "
6645 "reset. When I<arg> is 0, the polling driver will be used, which is also "
6650 #: build/C/man4/lp.4:105
6652 msgid "B<int ioctl(int >I<fd>B<, LPGETIRQ, int *>I<arg>B<)>"
6656 #: build/C/man4/lp.4:108
6657 msgid "Stores the currently used IRQ in I<arg>."
6661 #: build/C/man4/lp.4:108
6663 msgid "B<int ioctl(int >I<fd>B<, LPGETSTATUS, int *>I<arg>B<)>"
6667 #: build/C/man4/lp.4:112
6669 "Stores the value of the status port in I<arg>. The bits have the following "
6674 #: build/C/man4/lp.4:114
6676 msgid "LP_PBUSY\tinverted busy input, active high\n"
6680 #: build/C/man4/lp.4:115
6682 msgid "LP_PACK\tunchanged acknowledge input, active low\n"
6686 #: build/C/man4/lp.4:116
6688 msgid "LP_POUTPA\tunchanged out-of-paper input, active high\n"
6692 #: build/C/man4/lp.4:117
6694 msgid "LP_PSELECD\tunchanged selected input, active high\n"
6698 #: build/C/man4/lp.4:118
6700 msgid "LP_PERRORP\tunchanged error input, active low\n"
6704 #: build/C/man4/lp.4:123
6706 "Refer to your printer manual for the meaning of the signals. Note that "
6707 "undocumented bits may also be set, depending on your printer."
6711 #: build/C/man4/lp.4:123
6713 msgid "B<int ioctl(int >I<fd>B<, LPRESET)>"
6717 #: build/C/man4/lp.4:126
6718 msgid "Resets the printer. No argument is used."
6722 #. The printer driver was originally written by Jim Weigand and Linus
6724 #. It was further improved by Michael K.\& Johnson.
6725 #. The interrupt code was written by Nigel Gamble.
6726 #. Alan Cox modularized it.
6727 #. LPCAREFUL, LPABORT, LPGETSTATUS were added by Chris Metcalf.
6729 #: build/C/man4/lp.4:135
6734 #: build/C/man4/lp.4:141
6735 msgid "B<chmod>(1), B<chown>(1), B<mknod>(1), B<lpcntl>(8), B<tunelp>(8)"
6739 #: build/C/man3/makedev.3:26
6745 #: build/C/man3/makedev.3:26
6751 #: build/C/man3/makedev.3:29
6752 msgid "makedev, major, minor - manage a device number"
6756 #: build/C/man3/makedev.3:33
6759 "B<#define _BSD_SOURCE> /* See feature_test_macros(7) */\n"
6760 "B<#include E<lt>sys/types.hE<gt>>\n"
6764 #: build/C/man3/makedev.3:35
6766 msgid "B<dev_t makedev(int >I<maj>B<, int >I<min>B<);>\n"
6770 #: build/C/man3/makedev.3:38
6773 "B<unsigned int major(dev_t >I<dev>B<);>\n"
6774 "B<unsigned int minor(dev_t >I<dev>B<);>\n"
6778 #: build/C/man3/makedev.3:45
6780 "A device ID consists of two parts: a major ID, identifying the class of the "
6781 "device, and a minor ID, identifying a specific instance of a device in that "
6782 "class. A device ID is represented using the type I<dev_t>."
6786 #: build/C/man3/makedev.3:52
6788 "Given major and minor device IDs, B<makedev>() combines these to produce a "
6789 "device ID, returned as the function result. This device ID can be given to "
6790 "B<mknod>(2), for example."
6794 #: build/C/man3/makedev.3:62
6796 "The B<major>() and B<minor>() functions perform the converse task: given a "
6797 "device ID, they return, respectively, the major and minor components. These "
6798 "macros can be useful to, for example, decompose the device IDs in the "
6799 "structure returned by B<stat>(2)."
6802 #. The BSDs, HP-UX, Solaris, AIX, Irix
6804 #: build/C/man3/makedev.3:71
6806 "The B<makedev>(), B<major>(), and B<minor>() functions are not specified in "
6807 "POSIX.1, but are present on many other systems."
6811 #: build/C/man3/makedev.3:80
6813 "These interfaces are defined as macros. Since glibc 2.3.3, they have been "
6814 "aliases for three GNU-specific functions: B<gnu_dev_makedev>(), "
6815 "B<gnu_dev_major>(), and B<gnu_dev_minor>(). The latter names are exported, "
6816 "but the traditional names are more portable."
6820 #: build/C/man3/makedev.3:83
6821 msgid "B<mknod>(2), B<stat>(2)"
6825 #: build/C/man4/mem.4:26
6831 #: build/C/man4/mem.4:26 build/C/man4/ram.4:26
6837 #: build/C/man4/mem.4:29
6838 msgid "mem, kmem, port - system memory, kernel memory and system ports"
6842 #: build/C/man4/mem.4:34
6844 "B<mem> is a character device file that is an image of the main memory of the "
6845 "computer. It may be used, for example, to examine (and even patch) the "
6850 #: build/C/man4/mem.4:39
6852 "Byte addresses in B<mem> are interpreted as physical memory addresses. "
6853 "References to nonexistent locations cause errors to be returned."
6857 #: build/C/man4/mem.4:42
6859 "Examining and patching is likely to lead to unexpected results when "
6860 "read-only or write-only bits are present."
6864 #: build/C/man4/mem.4:44 build/C/man4/mem.4:59 build/C/man4/mem.4:72 build/C/man4/ram.4:35
6865 msgid "It is typically created by:"
6869 #: build/C/man4/mem.4:47
6870 msgid "mknod -m 660 /dev/mem c 1 1"
6874 #: build/C/man4/mem.4:49
6875 msgid "chown root:kmem /dev/mem"
6879 #: build/C/man4/mem.4:57
6881 "The file B<kmem> is the same as B<mem>, except that the kernel virtual "
6882 "memory rather than physical memory is accessed."
6886 #: build/C/man4/mem.4:62
6887 msgid "mknod -m 640 /dev/kmem c 1 2"
6891 #: build/C/man4/mem.4:64
6892 msgid "chown root:kmem /dev/kmem"
6896 #: build/C/man4/mem.4:70
6897 msgid "B<port> is similar to B<mem>, but the I/O ports are accessed."
6901 #: build/C/man4/mem.4:75
6902 msgid "mknod -m 660 /dev/port c 1 4"
6906 #: build/C/man4/mem.4:77
6907 msgid "chown root:mem /dev/port"
6911 #: build/C/man4/mem.4:80
6916 #: build/C/man4/mem.4:82
6917 msgid "I</dev/kmem>"
6921 #: build/C/man4/mem.4:84
6922 msgid "I</dev/port>"
6926 #: build/C/man4/mem.4:88
6927 msgid "B<chown>(1), B<mknod>(1), B<ioperm>(2)"
6931 #: build/C/man3/mkfifo.3:28
6937 #: build/C/man3/mkfifo.3:28
6943 #: build/C/man3/mkfifo.3:28
6949 #: build/C/man3/mkfifo.3:31
6950 msgid "mkfifo, mkfifoat - make a FIFO special file (a named pipe)"
6954 #: build/C/man3/mkfifo.3:35
6957 "B<#include E<lt>sys/types.hE<gt>>\n"
6958 "B<#include E<lt>sys/stat.hE<gt>>\n"
6962 #: build/C/man3/mkfifo.3:37
6964 msgid "B<int mkfifo(const char *>I<pathname>B<, mode_t >I<mode>B<);>\n"
6968 #: build/C/man3/mkfifo.3:40 build/C/man2/mknod.2:29
6971 "B<#include E<lt>fcntl.hE<gt> >/* Definition of AT_* constants */\n"
6972 "B<#include E<lt>sys/stat.hE<gt>>\n"
6976 #: build/C/man3/mkfifo.3:42
6979 "B<int mkfifoat(int >I<dirfd>B<, const char *>I<pathname>B<, mode_t "
6984 #: build/C/man3/mkfifo.3:47 build/C/man2/mknod.2:37 build/C/man3/syslog.3:55
6985 msgid "Feature Test Macro Requirements for glibc (see B<feature_test_macros>(7)):"
6989 #: build/C/man3/mkfifo.3:50
6990 msgid "B<mkfifoat>():"
6994 #: build/C/man3/mkfifo.3:53
6996 msgid "Since glibc 2.10:"
7000 #: build/C/man3/mkfifo.3:56
7001 msgid "_XOPEN_SOURCE\\ E<gt>=\\ 700 || _POSIX_C_SOURCE\\ E<gt>=\\ 200809L"
7005 #: build/C/man3/mkfifo.3:56
7007 msgid "Before glibc 2.10:"
7011 #: build/C/man3/mkfifo.3:59
7012 msgid "_ATFILE_SOURCE"
7016 #: build/C/man3/mkfifo.3:69
7018 "B<mkfifo>() makes a FIFO special file with name I<pathname>. I<mode> "
7019 "specifies the FIFO's permissions. It is modified by the process's B<umask> "
7020 "in the usual way: the permissions of the created file are B<(>I<mode>B< & "
7025 #: build/C/man3/mkfifo.3:76
7027 "A FIFO special file is similar to a pipe, except that it is created in a "
7028 "different way. Instead of being an anonymous communications channel, a FIFO "
7029 "special file is entered into the filesystem by calling B<mkfifo>()."
7033 #: build/C/man3/mkfifo.3:86
7035 "Once you have created a FIFO special file in this way, any process can open "
7036 "it for reading or writing, in the same way as an ordinary file. However, it "
7037 "has to be open at both ends simultaneously before you can proceed to do any "
7038 "input or output operations on it. Opening a FIFO for reading normally "
7039 "blocks until some other process opens the same FIFO for writing, and vice "
7040 "versa. See B<fifo>(7) for nonblocking handling of FIFO special files."
7044 #: build/C/man3/mkfifo.3:86
7050 #: build/C/man3/mkfifo.3:92
7052 "The B<mkfifoat>() function operates in exactly the same way as B<mkfifo>(), "
7053 "except for the differences described here."
7057 #: build/C/man3/mkfifo.3:102
7059 "If the pathname given in I<pathname> is relative, then it is interpreted "
7060 "relative to the directory referred to by the file descriptor I<dirfd> "
7061 "(rather than relative to the current working directory of the calling "
7062 "process, as is done by B<mkfifo>() for a relative pathname)."
7066 #: build/C/man3/mkfifo.3:114
7068 "If I<pathname> is relative and I<dirfd> is the special value B<AT_FDCWD>, "
7069 "then I<pathname> is interpreted relative to the current working directory of "
7070 "the calling process (like B<mkfifo>())."
7074 #: build/C/man3/mkfifo.3:120 build/C/man2/mknod.2:144
7075 msgid "If I<pathname> is absolute, then I<dirfd> is ignored."
7079 #: build/C/man3/mkfifo.3:128
7081 "On success B<mkfifo>() and B<mkfifoat>() return 0. In the case of an "
7082 "error, -1 is returned (in which case, I<errno> is set appropriately)."
7086 #: build/C/man3/mkfifo.3:129 build/C/man2/mknod.2:157 build/C/man4/st.4:829
7092 #: build/C/man3/mkfifo.3:133
7094 "One of the directories in I<pathname> did not allow search (execute) "
7099 #: build/C/man3/mkfifo.3:133 build/C/man2/mknod.2:165
7105 #: build/C/man3/mkfifo.3:137 build/C/man2/mknod.2:169
7107 "The user's quota of disk blocks or inodes on the filesystem has been "
7112 #: build/C/man3/mkfifo.3:137 build/C/man2/mknod.2:169
7118 #: build/C/man3/mkfifo.3:143 build/C/man2/mknod.2:176
7120 "I<pathname> already exists. This includes the case where I<pathname> is a "
7121 "symbolic link, dangling or not."
7125 #: build/C/man3/mkfifo.3:143 build/C/man2/mknod.2:188
7127 msgid "B<ENAMETOOLONG>"
7131 #: build/C/man3/mkfifo.3:151
7133 "Either the total length of I<pathname> is greater than B<PATH_MAX>, or an "
7134 "individual filename component has a length greater than B<NAME_MAX>. In the "
7135 "GNU system, there is no imposed limit on overall filename length, but some "
7136 "filesystems may place limits on the length of a component."
7140 #: build/C/man3/mkfifo.3:151 build/C/man2/mknod.2:191
7146 #: build/C/man3/mkfifo.3:155 build/C/man2/mknod.2:196
7148 "A directory component in I<pathname> does not exist or is a dangling "
7153 #: build/C/man3/mkfifo.3:155 build/C/man2/mknod.2:199 build/C/man4/st.4:857
7159 #: build/C/man3/mkfifo.3:158
7160 msgid "The directory or filesystem has no room for the new file."
7164 #: build/C/man3/mkfifo.3:158 build/C/man3/mkfifo.3:172 build/C/man2/mknod.2:204 build/C/man2/mknod.2:234
7170 #: build/C/man3/mkfifo.3:162 build/C/man2/mknod.2:209
7171 msgid "A component used as a directory in I<pathname> is not, in fact, a directory."
7175 #: build/C/man3/mkfifo.3:162 build/C/man2/mknod.2:223 build/C/man4/st.4:872
7181 #: build/C/man3/mkfifo.3:165
7182 msgid "I<pathname> refers to a read-only filesystem."
7186 #: build/C/man3/mkfifo.3:168
7187 msgid "The following additional errors can occur for B<mkfifoat>():"
7191 #: build/C/man3/mkfifo.3:172 build/C/man2/mknod.2:234
7192 msgid "I<dirfd> is not a valid file descriptor."
7196 #: build/C/man3/mkfifo.3:178
7198 "I<pathname> is a relative path and I<dirfd> is a file descriptor referring "
7199 "to a file other than a directory."
7203 #: build/C/man3/mkfifo.3:184
7205 "B<mkfifoat>() was added to glibc in version 2.4. It is implemented using "
7206 "B<mknodat>(2), available on Linux since kernel 2.6.16."
7210 #: build/C/man3/mkfifo.3:184 build/C/man3/stdarg.3:229
7216 #: build/C/man3/mkfifo.3:185 build/C/man3/stdarg.3:230
7218 msgid "Multithreading (see pthreads(7))"
7222 #: build/C/man3/mkfifo.3:191
7223 msgid "The B<mkfifo>() and B<mkfifoat>() functions are thread-safe."
7227 #: build/C/man3/mkfifo.3:194
7228 msgid "B<mkfifo>(): POSIX.1-2001, POSIX.1-2008."
7232 #: build/C/man3/mkfifo.3:197
7233 msgid "B<mkfifoat>(): POSIX.1-2008."
7237 #: build/C/man3/mkfifo.3:206
7239 "B<mkfifo>(1), B<close>(2), B<open>(2), B<read>(2), B<stat>(2), B<umask>(2), "
7240 "B<write>(2), B<fifo>(7)"
7244 #: build/C/man2/mknod.2:15
7250 #: build/C/man2/mknod.2:15
7256 #: build/C/man2/mknod.2:18
7257 msgid "mknod, mknodat - create a special or ordinary file"
7261 #: build/C/man2/mknod.2:24
7264 "B<#include E<lt>sys/types.hE<gt>>\n"
7265 "B<#include E<lt>sys/stat.hE<gt>>\n"
7266 "B<#include E<lt>fcntl.hE<gt>>\n"
7267 "B<#include E<lt>unistd.hE<gt>>\n"
7271 #: build/C/man2/mknod.2:26
7274 "B<int mknod(const char *>I<pathname>B<, mode_t >I<mode>B<, dev_t "
7279 #: build/C/man2/mknod.2:32
7282 "B<int mknodat(int >I<dirfd>B<, const char *>I<pathname>B<, mode_t "
7283 ">I<mode>B<, dev_t >I<dev>B<);>\n"
7287 #: build/C/man2/mknod.2:40
7292 #: build/C/man2/mknod.2:44
7294 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || "
7295 "_XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED"
7299 #: build/C/man2/mknod.2:56
7301 "The system call B<mknod>() creates a filesystem node (file, device special "
7302 "file, or named pipe) named I<pathname>, with attributes specified by I<mode> "
7307 #: build/C/man2/mknod.2:63
7309 "The I<mode> argument specifies both the permissions to use and the type of "
7310 "node to be created. It should be a combination (using bitwise OR) of one of "
7311 "the file types listed below and the permissions for the new node."
7315 #: build/C/man2/mknod.2:68
7317 "The permissions are modified by the process's I<umask> in the usual way: the "
7318 "permissions of the created node are I<(mode & ~umask)>."
7321 #. (S_IFSOCK since Linux 1.2.4)
7323 #: build/C/man2/mknod.2:82
7325 "The file type must be one of B<S_IFREG>, B<S_IFCHR>, B<S_IFBLK>, B<S_IFIFO>, "
7326 "or B<S_IFSOCK> to specify a regular file (which will be created empty), "
7327 "character special file, block special file, FIFO (named pipe), or UNIX "
7328 "domain socket, respectively. (Zero file type is equivalent to type "
7333 #: build/C/man2/mknod.2:95
7335 "If the file type is B<S_IFCHR> or B<S_IFBLK>, then I<dev> specifies the "
7336 "major and minor numbers of the newly created device special file "
7337 "(B<makedev>(3) may be useful to build the value for I<dev>); otherwise it "
7342 #: build/C/man2/mknod.2:101
7344 "If I<pathname> already exists, or is a symbolic link, this call fails with "
7345 "an B<EEXIST> error."
7349 #: build/C/man2/mknod.2:110
7351 "The newly created node will be owned by the effective user ID of the "
7352 "process. If the directory containing the node has the set-group-ID bit set, "
7353 "or if the filesystem is mounted with BSD group semantics, the new node will "
7354 "inherit the group ownership from its parent directory; otherwise it will be "
7355 "owned by the effective group ID of the process."
7359 #: build/C/man2/mknod.2:110
7365 #: build/C/man2/mknod.2:116
7367 "The B<mknodat>() system call operates in exactly the same way as "
7368 "B<mknod>(2), except for the differences described here."
7372 #: build/C/man2/mknod.2:126
7374 "If the pathname given in I<pathname> is relative, then it is interpreted "
7375 "relative to the directory referred to by the file descriptor I<dirfd> "
7376 "(rather than relative to the current working directory of the calling "
7377 "process, as is done by B<mknod>(2) for a relative pathname)."
7381 #: build/C/man2/mknod.2:138
7383 "If I<pathname> is relative and I<dirfd> is the special value B<AT_FDCWD>, "
7384 "then I<pathname> is interpreted relative to the current working directory of "
7385 "the calling process (like B<mknod>(2))."
7389 #: build/C/man2/mknod.2:149
7390 msgid "See B<openat>(2) for an explanation of the need for B<mknodat>()."
7394 #: build/C/man2/mknod.2:156
7396 "B<mknod>() and B<mknodat>() return zero on success, or -1 if an error "
7397 "occurred (in which case, I<errno> is set appropriately)."
7401 #: build/C/man2/mknod.2:165
7403 "The parent directory does not allow write permission to the process, or one "
7404 "of the directories in the path prefix of I<pathname> did not allow search "
7405 "permission. (See also B<path_resolution>(7).)"
7409 #: build/C/man2/mknod.2:176 build/C/man4/st.4:838
7415 #: build/C/man2/mknod.2:179
7416 msgid "I<pathname> points outside your accessible address space."
7420 #: build/C/man2/mknod.2:184
7422 "I<mode> requested creation of something other than a regular file, device "
7423 "special file, FIFO or socket."
7427 #: build/C/man2/mknod.2:184
7433 #: build/C/man2/mknod.2:188
7434 msgid "Too many symbolic links were encountered in resolving I<pathname>."
7438 #: build/C/man2/mknod.2:191
7439 msgid "I<pathname> was too long."
7443 #: build/C/man2/mknod.2:196 build/C/man4/st.4:850
7449 #: build/C/man2/mknod.2:199
7450 msgid "Insufficient kernel memory was available."
7454 #: build/C/man2/mknod.2:204
7455 msgid "The device containing I<pathname> has no room for the new node."
7458 #. For UNIX domain sockets and regular files, EPERM is returned only in
7459 #. Linux 2.2 and earlier; in Linux 2.4 and later, unprivileged can
7460 #. use mknod() to make these files.
7462 #: build/C/man2/mknod.2:223
7464 "I<mode> requested creation of something other than a regular file, FIFO "
7465 "(named pipe), or UNIX domain socket, and the caller is not privileged "
7466 "(Linux: does not have the B<CAP_MKNOD> capability); also returned if the "
7467 "filesystem containing I<pathname> does not support the type of node "
7472 #: build/C/man2/mknod.2:227
7473 msgid "I<pathname> refers to a file on a read-only filesystem."
7477 #: build/C/man2/mknod.2:230
7478 msgid "The following additional errors can occur for B<mknodat>():"
7482 #: build/C/man2/mknod.2:240
7484 "I<pathname> is relative and I<dirfd> is a file descriptor referring to a "
7485 "file other than a directory."
7489 #: build/C/man2/mknod.2:244
7491 "B<mknodat>() was added to Linux in kernel 2.6.16; library support was added "
7492 "to glibc in version 2.4."
7495 #. The Linux version differs from the SVr4 version in that it
7496 #. does not require root permission to create pipes, also in that no
7497 #. EMULTIHOP, ENOLINK, or EINTR error is documented.
7499 #: build/C/man2/mknod.2:250
7500 msgid "B<mknod>(): SVr4, 4.4BSD, POSIX.1-2001 (but see below), POSIX.1-2008."
7504 #: build/C/man2/mknod.2:253
7505 msgid "B<mknodat>(): POSIX.1-2008."
7509 #: build/C/man2/mknod.2:271
7511 "POSIX.1-2001 says: \"The only portable use of B<mknod>() is to create a "
7512 "FIFO-special file. If I<mode> is not B<S_IFIFO> or I<dev> is not 0, the "
7513 "behavior of B<mknod>() is unspecified.\" However, nowadays one should never "
7514 "use B<mknod>() for this purpose; one should use B<mkfifo>(3), a function "
7515 "especially defined for this purpose."
7518 #. and one should make UNIX domain sockets with socket(2) and bind(2).
7520 #: build/C/man2/mknod.2:278
7522 "Under Linux, B<mknod>() cannot be used to create directories. One should "
7523 "make directories with B<mkdir>(2)."
7527 #: build/C/man2/mknod.2:284
7529 "There are many infelicities in the protocol underlying NFS. Some of these "
7530 "affect B<mknod>() and B<mknodat>(2)."
7534 #: build/C/man2/mknod.2:297
7536 "B<chmod>(2), B<chown>(2), B<fcntl>(2), B<mkdir>(2), B<mount>(2), "
7537 "B<socket>(2), B<stat>(2), B<umask>(2), B<unlink>(2), B<makedev>(3), "
7538 "B<mkfifo>(3), B<path_resolution>(7)"
7542 #: build/C/man4/mouse.4:26
7548 #: build/C/man4/mouse.4:26
7554 #: build/C/man4/mouse.4:29
7555 msgid "mouse - serial mouse interface"
7559 #: build/C/man4/mouse.4:33
7561 "Serial mice are connected to a serial RS232/V24 dialout line, see B<ttyS>(4) "
7562 "for a description."
7566 #: build/C/man4/mouse.4:34
7568 msgid "Introduction"
7572 #: build/C/man4/mouse.4:36
7573 msgid "The pinout of the usual 9 pin plug as used for serial mice is:"
7577 #: build/C/man4/mouse.4:39
7579 msgid "pin\tname\tused for\n"
7583 #: build/C/man4/mouse.4:40
7585 msgid "2\tRX\tData\n"
7589 #: build/C/man4/mouse.4:41
7591 msgid "3\tTX\t-12 V, Imax = 10 mA\n"
7595 #: build/C/man4/mouse.4:42
7597 msgid "4\tDTR\t+12 V, Imax = 10 mA\n"
7601 #: build/C/man4/mouse.4:43
7603 msgid "7\tRTS\t+12 V, Imax = 10 mA\n"
7607 #: build/C/man4/mouse.4:44
7609 msgid "5\tGND\tGround\n"
7613 #: build/C/man4/mouse.4:48
7614 msgid "This is the specification, in fact 9 V suffices with most mice."
7618 #: build/C/man4/mouse.4:54
7620 "The mouse driver can recognize a mouse by dropping RTS to low and raising it "
7621 "again. About 14 ms later the mouse will send 0x4D (\\(aqM\\(aq) on the data "
7622 "line. After a further 63 ms, a Microsoft-compatible 3-button mouse will "
7623 "send 0x33 (\\(aq3\\(aq)."
7627 #: build/C/man4/mouse.4:66
7629 "The relative mouse movement is sent as I<dx> (positive means right) and "
7630 "I<dy> (positive means down). Various mice can operate at different speeds. "
7631 "To select speeds, cycle through the speeds 9600, 4800, 2400, and 1200 bit/s, "
7632 "each time writing the two characters from the table below and waiting 0.1 "
7633 "seconds. The following table shows available speeds and the strings that "
7638 #: build/C/man4/mouse.4:69
7640 msgid "bit/s\tstring\n"
7644 #: build/C/man4/mouse.4:70
7650 #: build/C/man4/mouse.4:71
7656 #: build/C/man4/mouse.4:72
7662 #: build/C/man4/mouse.4:73
7668 #: build/C/man4/mouse.4:77
7669 msgid "The first byte of a data packet can be used to synchronization purposes."
7673 #: build/C/man4/mouse.4:77
7675 msgid "Microsoft protocol"
7679 #: build/C/man4/mouse.4:93
7681 "The B<Microsoft> protocol uses 1 start bit, 7 data bits, no parity and one "
7682 "stop bit at the speed of 1200 bits/sec. Data is sent to RxD in 3-byte "
7683 "packets. The I<dx> and I<dy> movements are sent as two's-complement, I<lb> "
7684 "(I<rb>) are set when the left (right) button is pressed:"
7688 #: build/C/man4/mouse.4:96
7690 msgid "byte\td6\td5\td4\td3\td2\td1\td0\n"
7694 #: build/C/man4/mouse.4:97
7696 msgid "1\t1\tlb\trb\tdy7\tdy6\tdx7\tdx6\n"
7700 #: build/C/man4/mouse.4:98
7702 msgid "2\t0\tdx5\tdx4\tdx3\tdx2\tdx1\tdx0\n"
7706 #: build/C/man4/mouse.4:99
7708 msgid "3\t0\tdy5\tdy4\tdy3\tdy2\tdy1\tdy0\n"
7712 #: build/C/man4/mouse.4:101
7714 msgid "3-button Microsoft protocol"
7718 #: build/C/man4/mouse.4:110
7720 "Original Microsoft mice only have two buttons. However, there are some "
7721 "three button mice which also use the Microsoft protocol. Pressing or "
7722 "releasing the middle button is reported by sending a packet with zero "
7723 "movement and no buttons pressed. (Thus, unlike for the other two buttons, "
7724 "the status of the middle button is not reported in each packet.)"
7728 #: build/C/man4/mouse.4:110
7730 msgid "Logitech protocol"
7734 #: build/C/man4/mouse.4:119
7736 "Logitech serial 3-button mice use a different extension of the Microsoft "
7737 "protocol: when the middle button is up, the above 3-byte packet is sent. "
7738 "When the middle button is down a 4-byte packet is sent, where the 4th byte "
7739 "has value 0x20 (or at least has the 0x20 bit set). In particular, a press "
7740 "of the middle button is reported as 0,0,0,0x20 when no other buttons are "
7745 #: build/C/man4/mouse.4:119
7747 msgid "Mousesystems protocol"
7751 #: build/C/man4/mouse.4:137
7753 "The B<Mousesystems> protocol uses 1 start bit, 8 data bits, no parity and "
7754 "two stop bits at the speed of 1200 bits/sec. Data is sent to RxD in 5-byte "
7755 "packets. I<dx> is sent as the sum of the two two's-complement values, I<dy> "
7756 "is send as negated sum of the two two's-complement values. I<lb> (I<mb>, "
7757 "I<rb>) are cleared when the left (middle, right) button is pressed:"
7761 #: build/C/man4/mouse.4:140 build/C/man4/mouse.4:175
7763 msgid "byte\td7\td6\td5\td4\td3\td2\td1\td0\n"
7767 #: build/C/man4/mouse.4:141
7769 msgid "1\t1\t0\t0\t0\t0\tlb\tmb\trb\n"
7773 #: build/C/man4/mouse.4:142
7775 msgid "2\t0\tdxa6\tdxa5\tdxa4\tdxa3\tdxa2\tdxa1\tdxa0\n"
7779 #: build/C/man4/mouse.4:143
7781 msgid "3\t0\tdya6\tdya5\tdya4\tdya3\tdya2\tdya1\tdya0\n"
7785 #: build/C/man4/mouse.4:144
7787 msgid "4\t0\tdxb6\tdxb5\tdxb4\tdxb3\tdxb2\tdxb1\tdxb0\n"
7791 #: build/C/man4/mouse.4:145
7793 msgid "5\t0\tdyb6\tdyb5\tdyb4\tdyb3\tdyb2\tdyb1\tdyb0\n"
7797 #: build/C/man4/mouse.4:150
7799 "Bytes 4 and 5 describe the change that occurred since bytes 2 and 3 were "
7804 #: build/C/man4/mouse.4:150
7806 msgid "Sun protocol"
7810 #: build/C/man4/mouse.4:155
7812 "The B<Sun> protocol is the 3-byte version of the above 5-byte Mousesystems "
7813 "protocol: the last two bytes are not sent."
7817 #: build/C/man4/mouse.4:155
7823 #: build/C/man4/mouse.4:172
7825 "The B<MM> protocol uses 1 start bit, 8 data bits, odd parity and one stop "
7826 "bit at the speed of 1200 bits/sec. Data is sent to RxD in 3-byte packets. "
7827 "I<dx> and I<dy> are sent as single signed values, the sign bit indicating a "
7828 "negative value. I<lb> (I<mb>, I<rb>) are set when the left (middle, right) "
7829 "button is pressed:"
7833 #: build/C/man4/mouse.4:176
7835 msgid "1\t1\t0\t0\tdxs\tdys\tlb\tmb\trb\n"
7839 #: build/C/man4/mouse.4:177
7841 msgid "2\t0\tdx6\tdx5\tdx4\tdx3\tdx2\tdx1\tdx0\n"
7845 #: build/C/man4/mouse.4:178
7847 msgid "3\t0\tdy6\tdy5\tdy4\tdy3\tdy2\tdy1\tdy0\n"
7851 #: build/C/man4/mouse.4:181
7853 msgid "I</dev/mouse>"
7857 #: build/C/man4/mouse.4:184
7858 msgid "A commonly used symlink pointing to a mouse device."
7862 #: build/C/man4/mouse.4:187
7863 msgid "B<ttyS>(4), B<gpm>(8)"
7867 #: build/C/man4/msr.4:26
7873 #: build/C/man4/msr.4:29
7874 msgid "msr - x86 CPU MSR access device"
7878 #: build/C/man4/msr.4:36
7880 "I</dev/cpu/CPUNUM/msr> provides an interface to read and write the "
7881 "model-specific registers (MSRs) of an x86 CPU. I<CPUNUM> is the number of "
7882 "the CPU to access as listed in I</proc/cpuinfo>."
7886 #: build/C/man4/msr.4:42
7888 "The register access is done by opening the file and seeking to the MSR "
7889 "number as offset in the file, and then reading or writing in chunks of 8 "
7890 "bytes. An I/O transfer of more than 8 bytes means multiple reads or writes "
7891 "of the same register."
7895 #: build/C/man4/msr.4:47
7897 "This file is protected so that it can be read and written only by the user "
7898 "I<root>, or members of the group I<root>."
7902 #: build/C/man4/msr.4:53
7904 "The I<msr> driver is not auto-loaded. On modular kernels you might need to "
7905 "use the following command to load it explicitly before use:"
7909 #: build/C/man4/msr.4:55
7911 msgid " $ I<modprobe msr>\n"
7915 #: build/C/man4/msr.4:59
7917 "Intel Corporation Intel 64 and IA-32 Architectures Software Developer's "
7918 "Manual Volume 3B Appendix B, for an overview of the Intel CPU MSRs."
7922 #: build/C/man4/null.4:26
7928 #: build/C/man4/null.4:26
7934 #: build/C/man4/null.4:29
7935 msgid "null, zero - data sink"
7939 #: build/C/man4/null.4:35
7940 msgid "Data written to a B<null> or B<zero> special file is discarded."
7944 #: build/C/man4/null.4:44
7946 "Reads from the B<null> special file always return end of file (i.e., "
7947 "B<read>(2) returns 0), whereas reads from B<zero> always return bytes "
7948 "containing zero (\\e0 characters)."
7952 #: build/C/man4/null.4:49
7953 msgid "B<null> and B<zero> are typically created by:"
7957 #: build/C/man4/null.4:52
7958 msgid "mknod -m 666 /dev/null c 1 3"
7962 #: build/C/man4/null.4:54
7963 msgid "mknod -m 666 /dev/zero c 1 5"
7967 #: build/C/man4/null.4:56
7968 msgid "chown root:root /dev/null /dev/zero"
7972 #: build/C/man4/null.4:59
7973 msgid "I</dev/null>"
7977 #: build/C/man4/null.4:61
7978 msgid "I</dev/zero>"
7982 #: build/C/man4/null.4:64
7984 "If these devices are not writable and readable for all users, many programs "
7985 "will act strangely."
7989 #: build/C/man4/null.4:68
7990 msgid "B<chown>(1), B<mknod>(1), B<full>(4)"
7994 #: build/C/man7/pipe.7:25
8000 #: build/C/man7/pipe.7:25
8006 #: build/C/man7/pipe.7:28
8007 msgid "pipe - overview of pipes and FIFOs"
8011 #: build/C/man7/pipe.7:37
8013 "Pipes and FIFOs (also known as named pipes) provide a unidirectional "
8014 "interprocess communication channel. A pipe has a I<read end> and a I<write "
8015 "end>. Data written to the write end of a pipe can be read from the read end "
8020 #: build/C/man7/pipe.7:47
8022 "A pipe is created using B<pipe>(2), which creates a new pipe and returns two "
8023 "file descriptors, one referring to the read end of the pipe, the other "
8024 "referring to the write end. Pipes can be used to create a communication "
8025 "channel between related processes; see B<pipe>(2) for an example."
8029 #: build/C/man7/pipe.7:66
8031 "A FIFO (short for First In First Out) has a name within the filesystem "
8032 "(created using B<mkfifo>(3)), and is opened using B<open>(2). Any process "
8033 "may open a FIFO, assuming the file permissions allow it. The read end is "
8034 "opened using the B<O_RDONLY> flag; the write end is opened using the "
8035 "B<O_WRONLY> flag. See B<fifo>(7) for further details. I<Note>: although "
8036 "FIFOs have a pathname in the filesystem, I/O on FIFOs does not involve "
8037 "operations on the underlying device (if there is one)."
8041 #: build/C/man7/pipe.7:66
8043 msgid "I/O on pipes and FIFOs"
8047 #: build/C/man7/pipe.7:71
8049 "The only difference between pipes and FIFOs is the manner in which they are "
8050 "created and opened. Once these tasks have been accomplished, I/O on pipes "
8051 "and FIFOs has exactly the same semantics."
8055 #: build/C/man7/pipe.7:85
8057 "If a process attempts to read from an empty pipe, then B<read>(2) will "
8058 "block until data is available. If a process attempts to write to a full "
8059 "pipe (see below), then B<write>(2) blocks until sufficient data has been "
8060 "read from the pipe to allow the write to complete. Nonblocking I/O is "
8061 "possible by using the B<fcntl>(2) B<F_SETFL> operation to enable the "
8062 "B<O_NONBLOCK> open file status flag."
8066 #: build/C/man7/pipe.7:89
8068 "The communication channel provided by a pipe is a I<byte stream>: there is "
8069 "no concept of message boundaries."
8073 #: build/C/man7/pipe.7:116
8075 "If all file descriptors referring to the write end of a pipe have been "
8076 "closed, then an attempt to B<read>(2) from the pipe will see end-of-file "
8077 "(B<read>(2) will return 0). If all file descriptors referring to the read "
8078 "end of a pipe have been closed, then a B<write>(2) will cause a B<SIGPIPE> "
8079 "signal to be generated for the calling process. If the calling process is "
8080 "ignoring this signal, then B<write>(2) fails with the error B<EPIPE>. An "
8081 "application that uses B<pipe>(2) and B<fork>(2) should use suitable "
8082 "B<close>(2) calls to close unnecessary duplicate file descriptors; this "
8083 "ensures that end-of-file and B<SIGPIPE>/B<EPIPE> are delivered when "
8088 #: build/C/man7/pipe.7:120
8089 msgid "It is not possible to apply B<lseek>(2) to a pipe."
8093 #: build/C/man7/pipe.7:120
8095 msgid "Pipe capacity"
8099 #: build/C/man7/pipe.7:132
8101 "A pipe has a limited capacity. If the pipe is full, then a B<write>(2) "
8102 "will block or fail, depending on whether the B<O_NONBLOCK> flag is set (see "
8103 "below). Different implementations have different limits for the pipe "
8104 "capacity. Applications should not rely on a particular capacity: an "
8105 "application should be designed so that a reading process consumes data as "
8106 "soon as it is available, so that a writing process does not remain blocked."
8110 #: build/C/man7/pipe.7:136
8112 "In Linux versions before 2.6.11, the capacity of a pipe was the same as the "
8113 "system page size (e.g., 4096 bytes on i386). Since Linux 2.6.11, the pipe "
8114 "capacity is 65536 bytes."
8118 #: build/C/man7/pipe.7:136
8124 #: build/C/man7/pipe.7:158
8126 "POSIX.1-2001 says that B<write>(2)s of less than B<PIPE_BUF> bytes must be "
8127 "atomic: the output data is written to the pipe as a contiguous sequence. "
8128 "Writes of more than B<PIPE_BUF> bytes may be nonatomic: the kernel may "
8129 "interleave the data with data written by other processes. POSIX.1-2001 "
8130 "requires B<PIPE_BUF> to be at least 512 bytes. (On Linux, B<PIPE_BUF> is "
8131 "4096 bytes.) The precise semantics depend on whether the file descriptor is "
8132 "nonblocking (B<O_NONBLOCK>), whether there are multiple writers to the pipe, "
8133 "and on I<n>, the number of bytes to be written:"
8137 #: build/C/man7/pipe.7:158
8139 msgid "B<O_NONBLOCK> disabled, I<n> E<lt>= B<PIPE_BUF>"
8143 #: build/C/man7/pipe.7:167
8145 "All I<n> bytes are written atomically; B<write>(2) may block if there is "
8146 "not room for I<n> bytes to be written immediately"
8150 #: build/C/man7/pipe.7:167
8152 msgid "B<O_NONBLOCK> enabled, I<n> E<lt>= B<PIPE_BUF>"
8156 #: build/C/man7/pipe.7:181
8158 "If there is room to write I<n> bytes to the pipe, then B<write>(2) succeeds "
8159 "immediately, writing all I<n> bytes; otherwise B<write>(2) fails, with "
8160 "I<errno> set to B<EAGAIN>."
8164 #: build/C/man7/pipe.7:181
8166 msgid "B<O_NONBLOCK> disabled, I<n> E<gt> B<PIPE_BUF>"
8170 #: build/C/man7/pipe.7:193
8172 "The write is nonatomic: the data given to B<write>(2) may be interleaved "
8173 "with B<write>(2)s by other process; the B<write>(2) blocks until I<n> bytes "
8174 "have been written."
8178 #: build/C/man7/pipe.7:193
8180 msgid "B<O_NONBLOCK> enabled, I<n> E<gt> B<PIPE_BUF>"
8184 #: build/C/man7/pipe.7:208
8186 "If the pipe is full, then B<write>(2) fails, with I<errno> set to "
8187 "B<EAGAIN>. Otherwise, from 1 to I<n> bytes may be written (i.e., a "
8188 "\"partial write\" may occur; the caller should check the return value from "
8189 "B<write>(2) to see how many bytes were actually written), and these bytes "
8190 "may be interleaved with writes by other processes."
8194 #: build/C/man7/pipe.7:208
8196 msgid "Open file status flags"
8200 #: build/C/man7/pipe.7:214
8202 "The only open file status flags that can be meaningfully applied to a pipe "
8203 "or FIFO are B<O_NONBLOCK> and B<O_ASYNC>."
8207 #: build/C/man7/pipe.7:226
8209 "Setting the B<O_ASYNC> flag for the read end of a pipe causes a signal "
8210 "(B<SIGIO> by default) to be generated when new input becomes available on "
8211 "the pipe (see B<fcntl>(2) for details). On Linux, B<O_ASYNC> is supported "
8212 "for pipes and FIFOs only since kernel 2.6."
8216 #: build/C/man7/pipe.7:226
8218 msgid "Portability notes"
8222 #: build/C/man7/pipe.7:232
8224 "On some systems (but not Linux), pipes are bidirectional: data can be "
8225 "transmitted in both directions between the pipe ends. According to "
8226 "POSIX.1-2001, pipes only need to be unidirectional. Portable applications "
8227 "should avoid reliance on bidirectional pipe semantics."
8231 #: build/C/man7/pipe.7:244
8233 "B<dup>(2), B<fcntl>(2), B<open>(2), B<pipe>(2), B<poll>(2), B<select>(2), "
8234 "B<socketpair>(2), B<stat>(2), B<mkfifo>(3), B<epoll>(7), B<fifo>(7)"
8238 #: build/C/man4/ram.4:26
8244 #: build/C/man4/ram.4:29
8245 msgid "ram - ram disk device"
8249 #: build/C/man4/ram.4:33
8250 msgid "The I<ram> device is a block device to access the ram disk in raw mode."
8254 #: build/C/man4/ram.4:38
8255 msgid "mknod -m 660 /dev/ram b 1 1"
8259 #: build/C/man4/ram.4:40
8260 msgid "chown root:disk /dev/ram"
8264 #: build/C/man4/ram.4:43
8269 #: build/C/man4/ram.4:47
8270 msgid "B<chown>(1), B<mknod>(1), B<mount>(8)"
8274 #: build/C/man4/random.4:19
8280 #: build/C/man4/random.4:19
8286 #: build/C/man4/random.4:22
8287 msgid "random, urandom - kernel random number source devices"
8291 #: build/C/man4/random.4:24
8292 msgid "#include E<lt>linux/random.hE<gt>"
8296 #: build/C/man4/random.4:26
8297 msgid "B<int ioctl(>I<fd>B<, RND>I<request>B<, >I<param>B<);>"
8301 #: build/C/man4/random.4:33
8303 "The character special files I</dev/random> and I</dev/urandom> (present "
8304 "since Linux 1.3.30) provide an interface to the kernel's random number "
8305 "generator. File I</dev/random> has major device number 1 and minor device "
8306 "number 8. File I</dev/urandom> has major device number 1 and minor device "
8311 #: build/C/man4/random.4:39
8313 "The random number generator gathers environmental noise from device drivers "
8314 "and other sources into an entropy pool. The generator also keeps an "
8315 "estimate of the number of bits of noise in the entropy pool. From this "
8316 "entropy pool random numbers are created."
8320 #: build/C/man4/random.4:47
8322 "When read, the I</dev/random> device will only return random bytes within "
8323 "the estimated number of bits of noise in the entropy pool. I</dev/random> "
8324 "should be suitable for uses that need very high quality randomness such as "
8325 "one-time pad or key generation. When the entropy pool is empty, reads from "
8326 "I</dev/random> will block until additional environmental noise is gathered."
8330 #: build/C/man4/random.4:58
8332 "A read from the I</dev/urandom> device will not block waiting for more "
8333 "entropy. As a result, if there is not sufficient entropy in the entropy "
8334 "pool, the returned values are theoretically vulnerable to a cryptographic "
8335 "attack on the algorithms used by the driver. Knowledge of how to do this is "
8336 "not available in the current unclassified literature, but it is "
8337 "theoretically possible that such an attack may exist. If this is a concern "
8338 "in your application, use I</dev/random> instead."
8342 #: build/C/man4/random.4:65
8344 "Writing to I</dev/random> or I</dev/urandom> will update the entropy pool "
8345 "with the data written, but this will not result in a higher entropy count. "
8346 "This means that it will impact the contents read from both files, but it "
8347 "will not make reads from I</dev/random> faster."
8351 #: build/C/man4/random.4:74
8353 "If you are unsure about whether you should use I</dev/random> or "
8354 "I</dev/urandom>, then probably you want to use the latter. As a general "
8355 "rule, I</dev/urandom> should be used for everything except long-lived "
8360 #: build/C/man4/random.4:86
8362 "If a seed file is saved across reboots as recommended below (all major Linux "
8363 "distributions have done this since 2000 at least), the output is "
8364 "cryptographically secure against attackers without local root access as soon "
8365 "as it is reloaded in the boot sequence, and perfectly adequate for network "
8366 "encryption session keys. Since reads from I</dev/random> may block, users "
8367 "will usually want to open it in nonblocking mode (or perform a read with "
8368 "timeout), and provide some sort of user notification if the desired entropy "
8369 "is not immediately available."
8373 #: build/C/man4/random.4:99
8375 "The kernel random-number generator is designed to produce a small amount of "
8376 "high-quality seed material to seed a cryptographic pseudo-random number "
8377 "generator (CPRNG). It is designed for security, not speed, and is poorly "
8378 "suited to generating large amounts of random data. Users should be very "
8379 "economical in the amount of seed material that they read from "
8380 "I</dev/urandom> (and I</dev/random>); unnecessarily reading large quantities "
8381 "of data from this device will have a negative impact on other users of the "
8386 #: build/C/man4/random.4:107
8388 "The amount of seed material required to generate a cryptographic key equals "
8389 "the effective key size of the key. For example, a 3072-bit RSA or "
8390 "Diffie-Hellman private key has an effective key size of 128 bits (it "
8391 "requires about 2^128 operations to break) so a key generator only needs 128 "
8392 "bits (16 bytes) of seed material from I</dev/random>."
8396 #: build/C/man4/random.4:116
8398 "While some safety margin above that minimum is reasonable, as a guard "
8399 "against flaws in the CPRNG algorithm, no cryptographic primitive available "
8400 "today can hope to promise more than 256 bits of security, so if any program "
8401 "reads more than 256 bits (32 bytes) from the kernel random pool per "
8402 "invocation, or per reasonable reseed interval (not less than one minute), "
8403 "that should be taken as a sign that its cryptography is I<not> skillfully "
8408 #: build/C/man4/random.4:116
8410 msgid "Configuration"
8414 #: build/C/man4/random.4:120
8416 "If your system does not have I</dev/random> and I</dev/urandom> created "
8417 "already, they can be created with the following commands:"
8421 #: build/C/man4/random.4:125
8424 " mknod -m 644 /dev/random c 1 8\n"
8425 " mknod -m 644 /dev/urandom c 1 9\n"
8426 " chown root:root /dev/random /dev/urandom\n"
8430 #: build/C/man4/random.4:135
8432 "When a Linux system starts up without much operator interaction, the entropy "
8433 "pool may be in a fairly predictable state. This reduces the actual amount "
8434 "of noise in the entropy pool below the estimate. In order to counteract "
8435 "this effect, it helps to carry entropy pool information across shut-downs "
8436 "and start-ups. To do this, add the following lines to an appropriate script "
8437 "which is run during the Linux system start-up sequence:"
8441 #: build/C/man4/random.4:150
8444 " echo \"Initializing random number generator...\"\n"
8445 " random_seed=/var/run/random-seed\n"
8446 " # Carry a random seed from start-up to start-up\n"
8447 " # Load and then save the whole entropy pool\n"
8448 " if [ -f $random_seed ]; then\n"
8449 " cat $random_seed E<gt>/dev/urandom\n"
8451 " touch $random_seed\n"
8453 " chmod 600 $random_seed\n"
8454 " poolfile=/proc/sys/kernel/random/poolsize\n"
8455 " [ -r $poolfile ] && bytes=\\`cat $poolfile\\` || bytes=512\n"
8456 " dd if=/dev/urandom of=$random_seed count=1 bs=$bytes\n"
8460 #: build/C/man4/random.4:154
8462 "Also, add the following lines in an appropriate script which is run during "
8463 "the Linux system shutdown:"
8467 #: build/C/man4/random.4:165
8470 " # Carry a random seed from shut-down to start-up\n"
8471 " # Save the whole entropy pool\n"
8472 " echo \"Saving random seed...\"\n"
8473 " random_seed=/var/run/random-seed\n"
8474 " touch $random_seed\n"
8475 " chmod 600 $random_seed\n"
8476 " poolfile=/proc/sys/kernel/random/poolsize\n"
8477 " [ -r $poolfile ] && bytes=\\`cat $poolfile\\` || bytes=512\n"
8478 " dd if=/dev/urandom of=$random_seed count=1 bs=$bytes\n"
8482 #: build/C/man4/random.4:166
8484 msgid "/proc Interface"
8488 #: build/C/man4/random.4:172
8490 "The files in the directory I</proc/sys/kernel/random> (present since 2.3.16) "
8491 "provide an additional interface to the I</dev/random> device."
8495 #: build/C/man4/random.4:178
8497 "The read-only file I<entropy_avail> gives the available entropy. Normally, "
8498 "this will be 4096 (bits), a full entropy pool."
8502 #: build/C/man4/random.4:183
8504 "The file I<poolsize> gives the size of the entropy pool. The semantics of "
8505 "this file vary across kernel versions:"
8509 #: build/C/man4/random.4:184
8515 #: build/C/man4/random.4:191
8517 "This file gives the size of the entropy pool in I<bytes>. Normally, this "
8518 "file will have the value 512, but it is writable, and can be changed to any "
8519 "value for which an algorithm is available. The choices are 32, 64, 128, "
8520 "256, 512, 1024, or 2048."
8524 #: build/C/man4/random.4:191
8530 #: build/C/man4/random.4:196
8532 "This file is read-only, and gives the size of the entropy pool in I<bits>. "
8533 "It contains the value 4096."
8537 #: build/C/man4/random.4:214
8539 "The file I<read_wakeup_threshold> contains the number of bits of entropy "
8540 "required for waking up processes that sleep waiting for entropy from "
8541 "I</dev/random>. The default is 64. The file I<write_wakeup_threshold> "
8542 "contains the number of bits of entropy below which we wake up processes that "
8543 "do a B<select>(2) or B<poll>(2) for write access to I</dev/random>. These "
8544 "values can be changed by writing to the files."
8548 #: build/C/man4/random.4:222
8550 "The read-only files I<uuid> and I<boot_id> contain random strings like "
8551 "6fd5a44b-35f4-4ad4-a9b9-6b9be13e1fe9. The former is generated afresh for "
8552 "each read, the latter was generated once."
8556 #: build/C/man4/random.4:222
8558 msgid "ioctl(2) interface"
8562 #: build/C/man4/random.4:233
8564 "The following B<ioctl>(2) requests are defined on file descriptors "
8565 "connected to either I</dev/random> or I</dev/urandom>. All requests "
8566 "performed will interact with the input entropy pool impacting both "
8567 "I</dev/random> and I</dev/urandom>. The B<CAP_SYS_ADMIN> capability is "
8568 "required for all requests except B<RNDGETENTCNT>."
8572 #: build/C/man4/random.4:233
8574 msgid "B<RNDGETENTCNT>"
8578 #: build/C/man4/random.4:240
8580 "Retrieve the entropy count of the input pool, the contents will be the same "
8581 "as the I<entropy_avail> file under proc. The result will be stored in the "
8582 "int pointed to by the argument."
8586 #: build/C/man4/random.4:240
8588 msgid "B<RNDADDTOENTCNT>"
8592 #: build/C/man4/random.4:244
8594 "Increment or decrement the entropy count of the input pool by the value "
8595 "pointed to by the argument."
8599 #: build/C/man4/random.4:244
8601 msgid "B<RNDGETPOOL>"
8605 #: build/C/man4/random.4:247
8606 msgid "Removed in Linux 2.6.9."
8610 #: build/C/man4/random.4:247
8612 msgid "B<RNDADDENTROPY>"
8616 #: build/C/man4/random.4:255
8618 "Add some additional entropy to the input pool, incrementing the entropy "
8619 "count. This differs from writing to I</dev/random> or I</dev/urandom>, "
8620 "which only adds some data but does not increment the entropy count. The "
8621 "following structure is used:"
8625 #: build/C/man4/random.4:262
8628 " struct rand_pool_info {\n"
8629 " int entropy_count;\n"
8636 #: build/C/man4/random.4:271
8638 "Here I<entropy_count> is the value added to (or subtracted from) the entropy "
8639 "count, and I<buf> is the buffer of size I<buf_size> which gets added to the "
8644 #: build/C/man4/random.4:271
8646 msgid "B<RNDZAPENTCNT>, B<RNDCLEARPOOL>"
8650 #: build/C/man4/random.4:275
8652 "Zero the entropy count of all pools and add some system data (such as wall "
8653 "clock) to the pools."
8657 #: build/C/man4/random.4:277
8662 #. The kernel's random number generator was written by
8663 #. Theodore Ts'o (tytso@athena.mit.edu).
8665 #: build/C/man4/random.4:282
8666 msgid "/dev/urandom"
8670 #: build/C/man4/random.4:284
8675 #: build/C/man4/random.4:286
8676 msgid "RFC\\ 1750, \"Randomness Recommendations for Security\""
8680 #: build/C/man4/sd.4:26
8686 #: build/C/man4/sd.4:26
8692 #: build/C/man4/sd.4:29
8693 msgid "sd - driver for SCSI disk drives"
8697 #: build/C/man4/sd.4:33
8700 "B<#include E<lt>linux/hdreg.hE<gt> >/* for HDIO_GETGEO */\n"
8701 "B<#include E<lt>linux/fs.hE<gt> >/* for BLKGETSIZE and BLKRRPART "
8706 #: build/C/man4/sd.4:45
8708 "The block device name has the following form: B<sd>I<lp,> where I<l> is a "
8709 "letter denoting the physical drive, and I<p> is a number denoting the "
8710 "partition on that physical drive. Often, the partition number, I<p>, will "
8711 "be left off when the device corresponds to the whole drive."
8715 #: build/C/man4/sd.4:54
8717 "SCSI disks have a major device number of 8, and a minor device number of the "
8718 "form (16 * I<drive_number>) + I<partition_number>, where I<drive_number> is "
8719 "the number of the physical drive in order of detection, and "
8720 "I<partition_number> is as follows:"
8724 #: build/C/man4/sd.4:56
8725 msgid "partition 0 is the whole drive"
8729 #: build/C/man4/sd.4:58
8730 msgid "partitions 1-4 are the DOS \"primary\" partitions"
8734 #: build/C/man4/sd.4:60
8735 msgid "partitions 5-8 are the DOS \"extended\" (or \"logical\") partitions"
8739 #: build/C/man4/sd.4:68
8741 "For example, I</dev/sda> will have major 8, minor 0, and will refer to all "
8742 "of the first SCSI drive in the system; and I</dev/sdb3> will have major 8, "
8743 "minor 19, and will refer to the third DOS \"primary\" partition on the "
8744 "second SCSI drive in the system."
8748 #: build/C/man4/sd.4:71
8750 "At this time, only block devices are provided. Raw devices have not yet "
8755 #: build/C/man4/sd.4:75
8756 msgid "The following I<ioctl>s are provided:"
8760 #: build/C/man4/sd.4:75
8762 msgid "B<HDIO_GETGEO>"
8766 #: build/C/man4/sd.4:79
8767 msgid "Returns the BIOS disk parameters in the following structure:"
8771 #: build/C/man4/sd.4:88
8774 "struct hd_geometry {\n"
8775 " unsigned char heads;\n"
8776 " unsigned char sectors;\n"
8777 " unsigned short cylinders;\n"
8778 " unsigned long start;\n"
8783 #: build/C/man4/sd.4:94
8784 msgid "A pointer to this structure is passed as the B<ioctl>(2) parameter."
8788 #: build/C/man4/sd.4:109
8790 "The information returned in the parameter is the disk geometry of the drive "
8791 "I<as understood by DOS!> This geometry is I<not> the physical geometry of "
8792 "the drive. It is used when constructing the drive's partition table, "
8793 "however, and is needed for convenient operation of B<fdisk>(1), "
8794 "B<efdisk>(1), and B<lilo>(1). If the geometry information is not available, "
8795 "zero will be returned for all of the parameters."
8799 #: build/C/man4/sd.4:110
8801 msgid "B<BLKGETSIZE>"
8805 #: build/C/man4/sd.4:117
8807 "Returns the device size in sectors. The B<ioctl>(2) parameter should be a "
8808 "pointer to a I<long>."
8812 #: build/C/man4/sd.4:117
8814 msgid "B<BLKRRPART>"
8818 #: build/C/man4/sd.4:121
8819 msgid "Forces a reread of the SCSI disk partition tables. No parameter is needed."
8823 #: build/C/man4/sd.4:131
8825 "The SCSI B<ioctl>(2) operations are also supported. If the B<ioctl>(2) "
8826 "parameter is required, and it is NULL, then B<ioctl>(2) will fail with the "
8831 #: build/C/man4/sd.4:133
8832 msgid "/dev/sd[a-h]: the whole device"
8838 #: build/C/man4/sd.4:137
8839 msgid "/dev/sd[a-h][0-8]: individual block partitions"
8843 #: build/C/man3/setlogmask.3:25
8849 #: build/C/man3/setlogmask.3:25
8855 #: build/C/man3/setlogmask.3:28
8856 msgid "setlogmask - set log priority mask"
8860 #: build/C/man3/setlogmask.3:31
8862 msgid "B<#include E<lt>syslog.hE<gt>>\n"
8866 #: build/C/man3/setlogmask.3:33
8868 msgid "B<int setlogmask(int >I<mask>B<);>\n"
8872 #: build/C/man3/setlogmask.3:43
8874 "A process has a log priority mask that determines which calls to "
8875 "B<syslog>(3) may be logged. All other calls will be ignored. Logging is "
8876 "enabled for the priorities that have the corresponding bit set in I<mask>. "
8877 "The initial mask is such that logging is enabled for all priorities."
8881 #: build/C/man3/setlogmask.3:49
8883 "The B<setlogmask>() function sets this logmask for the calling process, and "
8884 "returns the previous mask. If the mask argument is 0, the current logmask "
8889 #: build/C/man3/setlogmask.3:69
8891 "The eight priorities are B<LOG_EMERG>, B<LOG_ALERT>, B<LOG_CRIT>, "
8892 "B<LOG_ERR>, B<LOG_WARNING>, B<LOG_NOTICE>, B<LOG_INFO>, and B<LOG_DEBUG>. "
8893 "The bit corresponding to a priority I<p> is I<LOG_MASK(p)>. Some systems "
8894 "also provide a macro I<LOG_UPTO(p)> for the mask of all priorities in the "
8895 "above list up to and including I<p>."
8899 #: build/C/man3/setlogmask.3:71
8900 msgid "This function returns the previous log priority mask."
8904 #. The glibc logmask handling was broken in versions before glibc 2.1.1.
8906 #: build/C/man3/setlogmask.3:75
8911 #: build/C/man3/setlogmask.3:78
8912 msgid "POSIX.1-2001. Note that the description in POSIX.1-2001 is flawed."
8916 #: build/C/man3/setlogmask.3:82
8917 msgid "B<closelog>(3), B<openlog>(3), B<syslog>(3)"
8921 #: build/C/man4/sk98lin.4:27
8927 #: build/C/man4/sk98lin.4:30
8928 msgid "sk98lin - Marvell/SysKonnect Gigabit Ethernet driver v6.21"
8932 #: build/C/man4/sk98lin.4:62
8934 "B<insmod sk98lin.o> [B<Speed_A=>I<i,j,...>] [B<Speed_B=>I<i,j,...>] "
8935 "[B<AutoNeg_A=>I<i,j,...>] [B<AutoNeg_B=>I<i,j,...>] [B<DupCap_A=>I<i,j,...>] "
8936 "[B<DupCap_B=>I<i,j,...>] [B<FlowCtrl_A=>I<i,j,...>] "
8937 "[B<FlowCtrl_B=>I<i,j,...>] [B<Role_A=>I<i,j,...>] [B<Role_B=>I<i,j,...>] "
8938 "[B<ConType=>I<i,j,...>] [B<Moderation=>I<i,j,...>] "
8939 "[B<IntsPerSec=>I<i,j,...>] [B<PrefPort=>I<i,j,...>] [B<RlmtMode=>I<i,j,...>]"
8943 #: build/C/man4/sk98lin.4:67
8944 msgid "B<Note>: This obsolete driver was removed from the kernel in version 2.6.26."
8948 #: build/C/man4/sk98lin.4:74
8950 "B<sk98lin> is the Gigabit Ethernet driver for Marvell and SysKonnect network "
8951 "adapter cards. It supports SysKonnect SK-98xx/SK-95xx compliant Gigabit "
8952 "Ethernet Adapter and any Yukon compliant chipset."
8956 #: build/C/man4/sk98lin.4:81
8958 "When loading the driver using insmod, parameters for the network adapter "
8959 "cards might be stated as a sequence of comma separated commands. If for "
8960 "instance two network adapters are installed and AutoNegotiation on Port A of "
8961 "the first adapter should be ON, but on the Port A of the second adapter "
8962 "switched OFF, one must enter:"
8966 #: build/C/man4/sk98lin.4:83
8968 msgid " insmod sk98lin.o AutoNeg_A=On,Off\n"
8972 #: build/C/man4/sk98lin.4:98
8974 "After B<sk98lin> is bound to one or more adapter cards and the I</proc> "
8975 "filesystem is mounted on your system, a dedicated statistics file will be "
8976 "created in the folder I</proc/net/sk98lin> for all ports of the installed "
8977 "network adapter cards. Those files are named I<eth[x]>, where I<x> is the "
8978 "number of the interface that has been assigned to a dedicated port by the "
8983 #: build/C/man4/sk98lin.4:108
8985 "If loading is finished, any desired IP address can be assigned to the "
8986 "respective I<eth[x]> interface using the B<ifconfig>(8) command. This "
8987 "causes the adapter to connect to the Ethernet and to display a status "
8988 "message on the console saying \"ethx: network connection up using port y\" "
8989 "followed by the configured or detected connection parameters."
8993 #: build/C/man4/sk98lin.4:124
8995 "The B<sk98lin> also supports large frames (also called jumbo frames). Using "
8996 "jumbo frames can improve throughput tremendously when transferring large "
8997 "amounts of data. To enable large frames, the MTU (maximum transfer unit) "
8998 "size for an interface is to be set to a high value. The default MTU size is "
8999 "1500 and can be changed up to 9000 (bytes). Setting the MTU size can be "
9000 "done when assigning the IP address to the interface or later by using the "
9001 "B<ifconfig>(8) command with the mtu parameter. If for instance eth0 needs "
9002 "an IP address and a large frame MTU size, the following two commands might "
9007 #: build/C/man4/sk98lin.4:127
9010 " ifconfig eth0 10.1.1.1\n"
9011 " ifconfig eth0 mtu 9000\n"
9015 #: build/C/man4/sk98lin.4:129
9016 msgid "Those two commands might even be combined into one:"
9020 #: build/C/man4/sk98lin.4:131
9022 msgid " ifconfig eth0 10.1.1.1 mtu 9000\n"
9026 #: build/C/man4/sk98lin.4:144
9028 "Note that large frames can be used only if permitted by your network "
9029 "infrastructure. This means, that any switch being used in your Ethernet "
9030 "must also support large frames. Quite some switches support large frames, "
9031 "but need to be configured to do so. Most of the times, their default "
9032 "setting is to support only standard frames with an MTU size of 1500 "
9033 "(bytes). In addition to the switches inside the network, all network "
9034 "adapters that are to be used must also be enabled regarding jumbo frames. "
9035 "If an adapter is not set to receive large frames, it will simply drop them."
9039 #: build/C/man4/sk98lin.4:148
9041 "Switching back to the standard Ethernet frame size can be done by using the "
9042 "B<ifconfig>(8) command again:"
9046 #: build/C/man4/sk98lin.4:150
9048 msgid " ifconfig eth0 mtu 1500\n"
9052 #: build/C/man4/sk98lin.4:156
9054 "The Marvell/SysKonnect Gigabit Ethernet driver for Linux is able to support "
9055 "VLAN and Link Aggregation according to IEEE standards 802.1, 802.1q, and "
9056 "802.3ad. Those features are available only after installation of open "
9057 "source modules which can be found on the Internet:"
9061 #: build/C/man4/sk98lin.4:161
9062 msgid "I<VLAN>: E<.UR http://www.candelatech.com\\:/~greear\\:/vlan.html> E<.UE>"
9066 #: build/C/man4/sk98lin.4:167
9067 msgid "I<Link> I<Aggregation>: E<.UR http://www.st.rim.or.jp\\:/~yumo> E<.UE>"
9071 #: build/C/man4/sk98lin.4:172
9073 "Note that Marvell/SysKonnect does not offer any support for these open "
9074 "source modules and does not take the responsibility for any kind of failures "
9075 "or problems arising when using these modules."
9079 #: build/C/man4/sk98lin.4:172 build/C/man4/wavelan.4:39
9085 #: build/C/man4/sk98lin.4:173
9087 msgid "B<Speed_A=>I<i,j,...>"
9091 #: build/C/man4/sk98lin.4:190
9093 "This parameter is used to set the speed capabilities of port A of an adapter "
9094 "card. It is valid only for Yukon copper adapters. Possible values are: "
9095 "I<10>, I<100>, I<1000>, or I<Auto>; I<Auto> is the default. Usually, the "
9096 "speed is negotiated between the two ports during link establishment. If "
9097 "this fails, a port can be forced to a specific setting with this parameter."
9101 #: build/C/man4/sk98lin.4:190
9103 msgid "B<Speed_B=>I<i,j,...>"
9107 #: build/C/man4/sk98lin.4:207
9109 "This parameter is used to set the speed capabilities of port B of an adapter "
9110 "card. It is valid only for Yukon copper adapters. Possible values are: "
9111 "I<10>, I<100>, I<1000>, or I<Auto>; I<Auto> is the default. Usually, the "
9112 "speed is negotiated between the two ports during link establishment. If "
9113 "this fails, a port can be forced to a specific setting with this parameter."
9117 #: build/C/man4/sk98lin.4:207
9119 msgid "B<AutoNeg_A=>I<i,j,...>"
9123 #: build/C/man4/sk98lin.4:221
9125 "Enables or disables the use of autonegotiation of port A of an adapter "
9126 "card. Possible values are: I<On>, I<Off>, or I<Sense>; I<On> is the "
9127 "default. The I<Sense> mode automatically detects whether the link partner "
9128 "supports auto-negotiation or not."
9132 #: build/C/man4/sk98lin.4:221
9134 msgid "B<AutoNeg_B=>I<i,j,...>"
9138 #: build/C/man4/sk98lin.4:235
9140 "Enables or disables the use of autonegotiation of port B of an adapter "
9141 "card. Possible values are: I<On>, I<Off>, or I<Sense>; I<On> is the "
9142 "default. The I<Sense> mode automatically detects whether the link partner "
9143 "supports auto-negotiation or not."
9147 #: build/C/man4/sk98lin.4:235
9149 msgid "B<DupCap_A=>I<i,j,...>"
9153 #: build/C/man4/sk98lin.4:265
9155 "This parameter indicates the duplex mode to be used for port A of an adapter "
9156 "card. Possible values are: I<Half>, I<Full>, or I<Both>; I<Both> is the "
9157 "default. This parameter is relevant only if AutoNeg_A of port A is not set "
9158 "to I<Sense>. If AutoNeg_A is set to I<On>, all three values of DupCap_A ( "
9159 "I<Half>, I<Full> or I<Both>) might be stated. If AutoNeg_A is set to "
9160 "I<Off>, only DupCap_A values I<Full> and I<Half> are allowed. This DupCap_A "
9161 "parameter is useful if your link partner does not support all possible "
9162 "duplex combinations."
9166 #: build/C/man4/sk98lin.4:265
9168 msgid "B<DupCap_B=>I<i,j,...>"
9172 #: build/C/man4/sk98lin.4:295
9174 "This parameter indicates the duplex mode to be used for port B of an adapter "
9175 "card. Possible values are: I<Half>, I<Full>, or I<Both>; I<Both> is the "
9176 "default. This parameter is relevant only if AutoNeg_B of port B is not set "
9177 "to I<Sense>. If AutoNeg_B is set to I<On>, all three values of DupCap_B ( "
9178 "I<Half>, I<Full> or I<Both>) might be stated. If AutoNeg_B is set to "
9179 "I<Off>, only DupCap_B values I<Full> and I<Half> are allowed. This DupCap_B "
9180 "parameter is useful if your link partner does not support all possible "
9181 "duplex combinations."
9185 #: build/C/man4/sk98lin.4:295
9187 msgid "B<FlowCtrl_A=>I<i,j,...>"
9191 #: build/C/man4/sk98lin.4:308 build/C/man4/sk98lin.4:341
9193 "This parameter can be used to set the flow control capabilities the port "
9194 "reports during auto-negotiation. Possible values are: I<Sym>, I<SymOrRem>, "
9195 "I<LocSend>, or I<None>; I<SymOrRem> is the default. The different modes "
9196 "have the following meaning:"
9200 #: build/C/man4/sk98lin.4:313 build/C/man4/sk98lin.4:345
9205 " both link partners are allowed to send PAUSE frames\n"
9209 #: build/C/man4/sk98lin.4:317 build/C/man4/sk98lin.4:349
9213 "= SymmetricOrRemote\n"
9214 " both or only remote partner are allowed to send PAUSE frames\n"
9218 #: build/C/man4/sk98lin.4:321 build/C/man4/sk98lin.4:353
9223 " only local link partner is allowed to send PAUSE frames\n"
9227 #: build/C/man4/sk98lin.4:325 build/C/man4/sk98lin.4:357
9232 " no link partner is allowed to send PAUSE frames\n"
9236 #: build/C/man4/sk98lin.4:328
9237 msgid "Note that this parameter is ignored if AutoNeg_A is set to I<Off>."
9241 #: build/C/man4/sk98lin.4:328
9243 msgid "B<FlowCtrl_B=>I<i,j,...>"
9247 #: build/C/man4/sk98lin.4:361
9248 msgid "Note that this parameter is ignored if AutoNeg_B is set to I<Off>."
9252 #: build/C/man4/sk98lin.4:361
9254 msgid "B<Role_A=>I<i,j,...>"
9258 #: build/C/man4/sk98lin.4:377
9260 "This parameter is valid only for 1000Base-T adapter cards. For two "
9261 "1000Base-T ports to communicate, one must take the role of the master "
9262 "(providing timing information), while the other must be the slave. Possible "
9263 "values are: I<Auto>, I<Master>, or I<Slave>; I<Auto> is the default. "
9264 "Usually, the role of a port is negotiated between two ports during link "
9265 "establishment, but if that fails the port A of an adapter card can be forced "
9266 "to a specific setting with this parameter."
9270 #: build/C/man4/sk98lin.4:377
9272 msgid "B<Role_B=>I<i,j,...>"
9276 #: build/C/man4/sk98lin.4:394
9278 "This parameter is valid only for 1000Base-T adapter cards. For two "
9279 "1000Base-T ports to communicate, one must take the role of the master "
9280 "(providing timing information), while the other must be the slave. Possible "
9281 "values are: I<Auto>, I<Master>, or I<Slave>; I<Auto> is the default. "
9282 "Usually, the role of a port is negotiated between two ports during link "
9283 "establishment, but if that fails the port B of an adapter card can be forced "
9284 "to a specific setting with this parameter."
9288 #: build/C/man4/sk98lin.4:394
9290 msgid "B<ConType=>I<i,j,...>"
9294 #: build/C/man4/sk98lin.4:402
9296 "This parameter is a combination of all five per-port parameters within one "
9297 "single parameter. This simplifies the configuration of both ports of an "
9298 "adapter card. The different values of this variable reflect the most "
9299 "meaningful combinations of port parameters. Possible values and their "
9300 "corresponding combination of per-port parameters:"
9304 #: build/C/man4/sk98lin.4:407
9307 "ConType | DupCap AutoNeg FlowCtrl Role Speed\n"
9308 "--------+-------------------------------------------\n"
9309 "I<Auto> | Both On SymOrRem Auto Auto\n"
9313 #: build/C/man4/sk98lin.4:409
9315 msgid "I<100FD> | Full Off None Auto 100\n"
9319 #: build/C/man4/sk98lin.4:411
9321 msgid "I<100HD> | Half Off None Auto 100\n"
9325 #: build/C/man4/sk98lin.4:413
9327 msgid "I<10FD> | Full Off None Auto 10\n"
9331 #: build/C/man4/sk98lin.4:415
9333 msgid "I<10HD> | Half Off None Auto 10\n"
9337 #: build/C/man4/sk98lin.4:425
9339 "Stating any other port parameter together with this I<ConType> parameter "
9340 "will result in a merged configuration of those settings. This is due to the "
9341 "fact, that the per-port parameters (e.g., I<Speed_A>) have a higher "
9342 "priority than the combined variable I<ConType>."
9346 #: build/C/man4/sk98lin.4:425
9348 msgid "B<Moderation=>I<i,j,...>"
9352 #: build/C/man4/sk98lin.4:442
9354 "Interrupt moderation is employed to limit the maximum number of interrupts "
9355 "the driver has to serve. That is, one or more interrupts (which indicate "
9356 "any transmit or receive packet to be processed) are queued until the driver "
9357 "processes them. When queued interrupts are to be served, is determined by "
9358 "the I<IntsPerSec> parameter, which is explained later below. Possible "
9359 "moderation modes are: I<None>, I<Static>, or I<Dynamic>; I<None> is the "
9360 "default. The different modes have the following meaning:"
9364 #: build/C/man4/sk98lin.4:447
9366 "I<None> No interrupt moderation is applied on the adapter card. Therefore, "
9367 "each transmit or receive interrupt is served immediately as soon as it "
9368 "appears on the interrupt line of the adapter card."
9372 #: build/C/man4/sk98lin.4:462
9374 "I<Static> Interrupt moderation is applied on the adapter card. All transmit "
9375 "and receive interrupts are queued until a complete moderation interval "
9376 "ends. If such a moderation interval ends, all queued interrupts are "
9377 "processed in one big bunch without any delay. The term I<Static> reflects "
9378 "the fact, that interrupt moderation is always enabled, regardless how much "
9379 "network load is currently passing via a particular interface. In addition, "
9380 "the duration of the moderation interval has a fixed length that never "
9381 "changes while the driver is operational."
9385 #: build/C/man4/sk98lin.4:473
9387 "I<Dynamic> Interrupt moderation might be applied on the adapter card, "
9388 "depending on the load of the system. If the driver detects that the system "
9389 "load is too high, the driver tries to shield the system against too much "
9390 "network load by enabling interrupt moderation. If\\(emat a later "
9391 "time\\(emthe CPU utilization decreases again (or if the network load is "
9392 "negligible), the interrupt moderation will automatically be disabled."
9396 #: build/C/man4/sk98lin.4:479
9398 "Interrupt moderation should be used when the driver has to handle one or "
9399 "more interfaces with a high network load, which\\(emas a "
9400 "consequence\\(emleads also to a high CPU utilization. When moderation is "
9401 "applied in such high network load situations, CPU load might be reduced by "
9402 "20-30% on slow computers."
9406 #: build/C/man4/sk98lin.4:483
9408 "Note that the drawback of using interrupt moderation is an increase of the "
9409 "round-trip-time (RTT), due to the queuing and serving of interrupts at "
9410 "dedicated moderation times."
9414 #: build/C/man4/sk98lin.4:483
9416 msgid "B<IntsPerSec=>I<i,j,...>"
9420 #: build/C/man4/sk98lin.4:493
9422 "This parameter determines the length of any interrupt moderation interval. "
9423 "Assuming that static interrupt moderation is to be used, an I<IntsPerSec> "
9424 "parameter value of 2000 will lead to an interrupt moderation interval of 500 "
9425 "microseconds. Possible values for this parameter are in the range of "
9426 "30...40000 (interrupts per second). The default value is 2000."
9430 #: build/C/man4/sk98lin.4:497
9432 "This parameter is used only if either static or dynamic interrupt moderation "
9433 "is enabled on a network adapter card. This parameter is ignored if no "
9434 "moderation is applied."
9438 #: build/C/man4/sk98lin.4:504
9440 "Note that the duration of the moderation interval is to be chosen with "
9441 "care. At first glance, selecting a very long duration (e.g., only 100 "
9442 "interrupts per second) seems to be meaningful, but the increase of "
9443 "packet-processing delay is tremendous. On the other hand, selecting a very "
9444 "short moderation time might compensate the use of any moderation being "
9449 #: build/C/man4/sk98lin.4:504
9451 msgid "B<PrefPort=>I<i,j,...>"
9455 #: build/C/man4/sk98lin.4:516
9457 "This parameter is used to force the preferred port to A or B (on dual-port "
9458 "network adapters). The preferred port is the one that is used if both ports "
9459 "A and B are detected as fully functional. Possible values are: I<A> or "
9460 "I<B>; I<A> is the default."
9464 #: build/C/man4/sk98lin.4:516
9466 msgid "B<RlmtMode=>I<i,j,...>"
9470 #: build/C/man4/sk98lin.4:532
9472 "RLMT monitors the status of the port. If the link of the active port fails, "
9473 "RLMT switches immediately to the standby link. The virtual link is "
9474 "maintained as long as at least one \"physical\" link is up. This parameters "
9475 "states how RLMT should monitor both ports. Possible values are: "
9476 "I<CheckLinkState>, I<CheckLocalPort>, I<CheckSeg>, or I<DualNet>; "
9477 "I<CheckLinkState> is the default. The different modes have the following "
9482 #: build/C/man4/sk98lin.4:537
9484 "I<CheckLinkState> Check link state only: RLMT uses the link state reported "
9485 "by the adapter hardware for each individual port to determine whether a port "
9486 "can be used for all network traffic or not."
9490 #: build/C/man4/sk98lin.4:545
9492 "I<CheckLocalPort> In this mode, RLMT monitors the network path between the "
9493 "two ports of an adapter by regularly exchanging packets between them. This "
9494 "mode requires a network configuration in which the two ports are able to "
9495 "\"see\" each other (i.e., there must not be any router between the ports)."
9499 #: build/C/man4/sk98lin.4:554
9501 "I<CheckSeg> Check local port and segmentation: This mode supports the same "
9502 "functions as the CheckLocalPort mode and additionally checks network "
9503 "segmentation between the ports. Therefore, this mode is to be used only if "
9504 "Gigabit Ethernet switches are installed on the network that have been "
9505 "configured to use the Spanning Tree protocol."
9509 #: build/C/man4/sk98lin.4:565
9511 "I<DualNet> In this mode, ports A and B are used as separate devices. If you "
9512 "have a dual port adapter, port A will be configured as I<eth[x]> and port B "
9513 "as I<eth[x+1]>. Both ports can be used independently with distinct IP "
9514 "addresses. The preferred port setting is not used. RLMT is turned off."
9518 #: build/C/man4/sk98lin.4:574
9520 "Note that RLMT modes I<CheckLocalPort> and I<CheckLinkState> are designed to "
9521 "operate in configurations where a network path between the ports on one "
9522 "adapter exists. Moreover, they are not designed to work where adapters are "
9523 "connected back-to-back."
9527 #: build/C/man4/sk98lin.4:575
9529 msgid "I</proc/net/sk98lin/eth[x]>"
9533 #: build/C/man4/sk98lin.4:581
9535 "The statistics file of a particular interface of an adapter card. It "
9536 "contains generic information about the adapter card plus a detailed summary "
9537 "of all transmit and receive counters."
9541 #: build/C/man4/sk98lin.4:581
9543 msgid "I</usr/src/linux/Documentation/networking/sk98lin.txt>"
9547 #: build/C/man4/sk98lin.4:592
9549 "This is the I<README> file of the I<sk98lin> driver. It contains a detailed "
9550 "installation HOWTO and describes all parameters of the driver. It denotes "
9551 "also common problems and provides the solution to them."
9555 #. Ralph Roesler \(em rroesler@syskonnect.de
9557 #. Mirko Lindner \(em mlindner@syskonnect.de
9559 #: build/C/man4/sk98lin.4:598
9560 msgid "Report any bugs to linux@syskonnect.de"
9564 #: build/C/man4/sk98lin.4:602
9565 msgid "B<ifconfig>(8), B<insmod>(8), B<modprobe>(8)"
9569 #: build/C/man4/st.4:25
9575 #: build/C/man4/st.4:28
9576 msgid "st - SCSI tape device"
9580 #: build/C/man4/st.4:31
9582 msgid "B<#include E<lt>sys/mtio.hE<gt>>\n"
9586 #: build/C/man4/st.4:36
9589 "B<int ioctl(int >I<fd>B<, int >I<request>B< [, (void *)>I<arg3>B<]);>\n"
9590 "B<int ioctl(int >I<fd>B<, MTIOCTOP, (struct mtop *)>I<mt_cmd>B<);>\n"
9591 "B<int ioctl(int >I<fd>B<, MTIOCGET, (struct mtget *)>I<mt_status>B<);>\n"
9592 "B<int ioctl(int >I<fd>B<, MTIOCPOS, (struct mtpos *)>I<mt_pos>B<);>\n"
9596 #: build/C/man4/st.4:46
9598 "The B<st> driver provides the interface to a variety of SCSI tape devices. "
9599 "Currently, the driver takes control of all detected devices of type "
9600 "\\(lqsequential-access\\(rq. The B<st> driver uses major device number 9."
9604 #: build/C/man4/st.4:66
9606 "Each device uses eight minor device numbers. The lowermost five bits in the "
9607 "minor numbers are assigned sequentially in the order of detection. In the "
9608 "2.6 kernel, the bits above the eight lowermost bits are concatenated to the "
9609 "five lowermost bits to form the tape number. The minor numbers can be "
9610 "grouped into two sets of four numbers: the principal (auto-rewind) minor "
9611 "device numbers, I<n>, and the \\(lqno-rewind\\(rq device numbers, (I<n> + "
9612 "128). Devices opened using the principal device number will be sent a "
9613 "B<REWIND> command when they are closed. Devices opened using the "
9614 "\\(lqno-rewind\\(rq device number will not. (Note that using an auto-rewind "
9615 "device for positioning the tape with, for instance, mt does not lead to the "
9616 "desired result: the tape is rewound after the mt command and the next "
9617 "command starts from the beginning of the tape)."
9621 #: build/C/man4/st.4:80
9623 "Within each group, four minor numbers are available to define devices with "
9624 "different characteristics (block size, compression, density, etc.) When the "
9625 "system starts up, only the first device is available. The other three are "
9626 "activated when the default characteristics are defined (see below). (By "
9627 "changing compile-time constants, it is possible to change the balance "
9628 "between the maximum number of tape drives and the number of minor numbers "
9629 "for each drive. The default allocation allows control of 32 tape drives. "
9630 "For instance, it is possible to control up to 64 tape drives with two minor "
9631 "numbers for different options.)"
9635 #: build/C/man4/st.4:82
9636 msgid "Devices are typically created by:"
9640 #: build/C/man4/st.4:93
9643 "mknod -m 666 /dev/st0 c 9 0\n"
9644 "mknod -m 666 /dev/st0l c 9 32\n"
9645 "mknod -m 666 /dev/st0m c 9 64\n"
9646 "mknod -m 666 /dev/st0a c 9 96\n"
9647 "mknod -m 666 /dev/nst0 c 9 128\n"
9648 "mknod -m 666 /dev/nst0l c 9 160\n"
9649 "mknod -m 666 /dev/nst0m c 9 192\n"
9650 "mknod -m 666 /dev/nst0a c 9 224\n"
9654 #: build/C/man4/st.4:97
9655 msgid "There is no corresponding block device."
9659 #: build/C/man4/st.4:112
9661 "The driver uses an internal buffer that has to be large enough to hold at "
9662 "least one tape block. In kernels before 2.1.121, the buffer is allocated as "
9663 "one contiguous block. This limits the block size to the largest contiguous "
9664 "block of memory the kernel allocator can provide. The limit is currently "
9665 "128 kB for 32-bit architectures and 256 kB for 64-bit architectures. In "
9666 "newer kernels the driver allocates the buffer in several parts if "
9667 "necessary. By default, the maximum number of parts is 16. This means that "
9668 "the maximum block size is very large (2 MB if allocation of 16 blocks of 128 "
9673 #: build/C/man4/st.4:121
9675 "The driver's internal buffer size is determined by a compile-time constant "
9676 "which can be overridden with a kernel startup option. In addition to this, "
9677 "the driver tries to allocate a larger temporary buffer at run time if "
9678 "necessary. However, run-time allocation of large contiguous blocks of "
9679 "memory may fail and it is advisable not to rely too much on dynamic buffer "
9680 "allocation with kernels older than 2.1.121 (this applies also to "
9681 "demand-loading the driver with kerneld or kmod)."
9685 #: build/C/man4/st.4:134
9687 "The driver does not specifically support any tape drive brand or model. "
9688 "After system start-up the tape device options are defined by the drive "
9689 "firmware. For example, if the drive firmware selects fixed-block mode, the "
9690 "tape device uses fixed-block mode. The options can be changed with explicit "
9691 "B<ioctl>(2) calls and remain in effect when the device is closed and "
9692 "reopened. Setting the options affects both the auto-rewind and the "
9697 #: build/C/man4/st.4:143
9699 "Different options can be specified for the different devices within the "
9700 "subgroup of four. The options take effect when the device is opened. For "
9701 "example, the system administrator can define one device that writes in "
9702 "fixed-block mode with a certain block size, and one which writes in "
9703 "variable-block mode (if the drive supports both modes)."
9707 #: build/C/man4/st.4:166
9709 "The driver supports B<tape partitions> if they are supported by the drive. "
9710 "(Note that the tape partitions have nothing to do with disk partitions. A "
9711 "partitioned tape can be seen as several logical tapes within one medium.) "
9712 "Partition support has to be enabled with an B<ioctl>(2). The tape location "
9713 "is preserved within each partition across partition changes. The partition "
9714 "used for subsequent tape operations is selected with an B<ioctl>(2). The "
9715 "partition switch is executed together with the next tape operation in order "
9716 "to avoid unnecessary tape movement. The maximum number of partitions on a "
9717 "tape is defined by a compile-time constant (originally four). The driver "
9718 "contains an B<ioctl>(2) that can format a tape with either one or two "
9723 #: build/C/man4/st.4:171
9725 "Device I</dev/tape> is usually created as a hard or soft link to the default "
9726 "tape device on the system."
9730 #: build/C/man4/st.4:175
9732 "Starting from kernel 2.6.2, the driver exports in the sysfs directory "
9733 "I</sys/class/scsi_tape> the attached devices and some parameters assigned to "
9738 #: build/C/man4/st.4:175
9740 msgid "Data transfer"
9744 #: build/C/man4/st.4:188
9746 "The driver supports operation in both fixed-block mode and variable-block "
9747 "mode (if supported by the drive). In fixed-block mode the drive writes "
9748 "blocks of the specified size and the block size is not dependent on the byte "
9749 "counts of the write system calls. In variable-block mode one tape block is "
9750 "written for each write call and the byte count determines the size of the "
9751 "corresponding tape block. Note that the blocks on the tape don't contain "
9752 "any information about the writing mode: when reading, the only important "
9753 "thing is to use commands that accept the block sizes on the tape."
9757 #: build/C/man4/st.4:197
9759 "In variable-block mode the read byte count does not have to match the tape "
9760 "block size exactly. If the byte count is larger than the next block on "
9761 "tape, the driver returns the data and the function returns the actual block "
9762 "size. If the block size is larger than the byte count, the requested amount "
9763 "of data from the start of the block is returned and the rest of the block is "
9768 #: build/C/man4/st.4:206
9770 "In fixed-block mode the read byte counts can be arbitrary if buffering is "
9771 "enabled, or a multiple of the tape block size if buffering is disabled. "
9772 "Kernels before 2.1.121 allow writes with arbitrary byte count if buffering "
9773 "is enabled. In all other cases (kernel before 2.1.121 with buffering "
9774 "disabled or newer kernel) the write byte count must be a multiple of the "
9779 #: build/C/man4/st.4:215
9781 "In the 2.6 kernel, the driver tries to use direct transfers between the user "
9782 "buffer and the device. If this is not possible, the driver's internal "
9783 "buffer is used. The reasons for not using direct transfers include improper "
9784 "alignment of the user buffer (default is 512 bytes but this can be changed "
9785 "by the HBA driver), one or more pages of the user buffer not reachable by "
9786 "the SCSI adapter, and so on."
9790 #: build/C/man4/st.4:218
9792 "A filemark is automatically written to tape if the last tape operation "
9793 "before close was a write."
9797 #: build/C/man4/st.4:230
9799 "When a filemark is encountered while reading, the following happens. If "
9800 "there are data remaining in the buffer when the filemark is found, the "
9801 "buffered data is returned. The next read returns zero bytes. The following "
9802 "read returns data from the next file. The end of recorded data is signaled "
9803 "by returning zero bytes for two consecutive read calls. The third read "
9808 #: build/C/man4/st.4:230
9814 #: build/C/man4/st.4:241
9816 "The driver supports three B<ioctl>(2) requests. Requests not recognized by "
9817 "the B<st> driver are passed to the B<SCSI> driver. The definitions below "
9818 "are from I</usr/include/linux/mtio.h>:"
9822 #: build/C/man4/st.4:241
9824 msgid "MTIOCTOP \\(em perform a tape operation"
9828 #: build/C/man4/st.4:249
9830 "This request takes an argument of type I<(struct mtop\\ *)>. Not all drives "
9831 "support all operations. The driver returns an B<EIO> error if the drive "
9832 "rejects an operation."
9836 #: build/C/man4/st.4:257
9839 "/* Structure for MTIOCTOP - mag tape op command: */\n"
9841 " short mt_op; /* operations defined below */\n"
9842 " int mt_count; /* how many of them */\n"
9847 #: build/C/man4/st.4:261
9848 msgid "Magnetic Tape operations for normal tape use:"
9852 #: build/C/man4/st.4:261
9858 #: build/C/man4/st.4:266
9859 msgid "Backward space over I<mt_count> filemarks."
9863 #: build/C/man4/st.4:266
9869 #: build/C/man4/st.4:272
9871 "Backward space over I<mt_count> filemarks. Reposition the tape to the EOT "
9872 "side of the last filemark."
9876 #: build/C/man4/st.4:272
9882 #: build/C/man4/st.4:277
9883 msgid "Backward space over I<mt_count> records (tape blocks)."
9887 #: build/C/man4/st.4:277
9893 #: build/C/man4/st.4:282
9894 msgid "Backward space over I<mt_count> setmarks."
9898 #: build/C/man4/st.4:282
9900 msgid "B<MTCOMPRESSION>"
9904 #: build/C/man4/st.4:290
9906 "Enable compression of tape data within the drive if I<mt_count> is nonzero "
9907 "and disable compression if I<mt_count> is zero. This command uses the MODE "
9908 "page 15 supported by most DATs."
9912 #: build/C/man4/st.4:290
9918 #: build/C/man4/st.4:293
9919 msgid "Go to the end of the recorded media (for appending files)."
9923 #: build/C/man4/st.4:293
9929 #: build/C/man4/st.4:299
9931 "Erase tape. With 2.6 kernel, short erase (mark tape empty) is performed if "
9932 "the argument is zero. Otherwise long erase (erase all) is done."
9936 #: build/C/man4/st.4:299
9942 #: build/C/man4/st.4:304
9943 msgid "Forward space over I<mt_count> filemarks."
9947 #: build/C/man4/st.4:304
9953 #: build/C/man4/st.4:310
9955 "Forward space over I<mt_count> filemarks. Reposition the tape to the BOT "
9956 "side of the last filemark."
9960 #: build/C/man4/st.4:310
9966 #: build/C/man4/st.4:315
9967 msgid "Forward space over I<mt_count> records (tape blocks)."
9971 #: build/C/man4/st.4:315
9977 #: build/C/man4/st.4:320
9978 msgid "Forward space over I<mt_count> setmarks."
9982 #: build/C/man4/st.4:320
9988 #: build/C/man4/st.4:331
9990 "Execute the SCSI load command. A special case is available for some HP "
9991 "autoloaders. If I<mt_count> is the constant B<MT_ST_HPLOADER_OFFSET> plus a "
9992 "number, the number is sent to the drive to control the autoloader."
9996 #: build/C/man4/st.4:331
10001 #. type: Plain text
10002 #: build/C/man4/st.4:334
10003 msgid "Lock the tape drive door."
10007 #: build/C/man4/st.4:334
10009 msgid "B<MTMKPART>"
10012 #. type: Plain text
10013 #: build/C/man4/st.4:348
10015 "Format the tape into one or two partitions. If I<mt_count> is nonzero, it "
10016 "gives the size of the first partition and the second partition contains the "
10017 "rest of the tape. If I<mt_count> is zero, the tape is formatted into one "
10018 "partition. This command is not allowed for a drive unless the partition "
10019 "support is enabled for the drive (see B<MT_ST_CAN_PARTITIONS> below)."
10023 #: build/C/man4/st.4:348
10028 #. type: Plain text
10029 #: build/C/man4/st.4:353
10031 "No op\\(emflushes the driver's buffer as a side effect. Should be used "
10032 "before reading status with B<MTIOCGET>."
10036 #: build/C/man4/st.4:353
10041 #. type: Plain text
10042 #: build/C/man4/st.4:356
10043 msgid "Rewind and put the drive off line."
10047 #: build/C/man4/st.4:356
10052 #. type: Plain text
10053 #: build/C/man4/st.4:359
10054 msgid "Reset drive."
10058 #: build/C/man4/st.4:359
10063 #. type: Plain text
10064 #: build/C/man4/st.4:362
10065 msgid "Re-tension tape."
10069 #: build/C/man4/st.4:362
10074 #. type: Plain text
10075 #: build/C/man4/st.4:365
10080 #: build/C/man4/st.4:365
10085 #. type: Plain text
10086 #: build/C/man4/st.4:377
10088 "Seek to the tape block number specified in I<mt_count>. This operation "
10089 "requires either a SCSI-2 drive that supports the B<LOCATE> command "
10090 "(device-specific address) or a Tandberg-compatible SCSI-1 drive (Tandberg, "
10091 "Archive Viper, Wangtek, ...). The block number should be one that was "
10092 "previously returned by B<MTIOCPOS> if device-specific addresses are used."
10096 #: build/C/man4/st.4:377
10098 msgid "B<MTSETBLK>"
10101 #. type: Plain text
10102 #: build/C/man4/st.4:382
10104 "Set the drive's block length to the value specified in I<mt_count>. A block "
10105 "length of zero sets the drive to variable block size mode."
10109 #: build/C/man4/st.4:382
10111 msgid "B<MTSETDENSITY>"
10114 #. type: Plain text
10115 #: build/C/man4/st.4:388
10117 "Set the tape density to the code in I<mt_count>. The density codes "
10118 "supported by a drive can be found from the drive documentation."
10122 #: build/C/man4/st.4:388
10124 msgid "B<MTSETPART>"
10127 #. type: Plain text
10128 #: build/C/man4/st.4:397
10130 "The active partition is switched to I<mt_count>. The partitions are "
10131 "numbered from zero. This command is not allowed for a drive unless the "
10132 "partition support is enabled for the drive (see B<MT_ST_CAN_PARTITIONS> "
10137 #: build/C/man4/st.4:397
10139 msgid "B<MTUNLOAD>"
10142 #. type: Plain text
10143 #: build/C/man4/st.4:400
10144 msgid "Execute the SCSI unload command (does not eject the tape)."
10148 #: build/C/man4/st.4:400
10150 msgid "B<MTUNLOCK>"
10153 #. type: Plain text
10154 #: build/C/man4/st.4:403
10155 msgid "Unlock the tape drive door."
10159 #: build/C/man4/st.4:403
10164 #. type: Plain text
10165 #: build/C/man4/st.4:408
10166 msgid "Write I<mt_count> filemarks."
10170 #: build/C/man4/st.4:408
10175 #. type: Plain text
10176 #: build/C/man4/st.4:413
10177 msgid "Write I<mt_count> setmarks."
10180 #. type: Plain text
10181 #: build/C/man4/st.4:415
10182 msgid "Magnetic Tape operations for setting of device options (by the superuser):"
10186 #: build/C/man4/st.4:415
10188 msgid "B<MTSETDRVBUFFER>"
10191 #. type: Plain text
10192 #: build/C/man4/st.4:424
10194 "Set various drive and driver options according to bits encoded in "
10195 "I<mt_count>. These consist of the drive's buffering mode, a set of Boolean "
10196 "driver options, the buffer write threshold, defaults for the block size and "
10197 "density, and timeouts (only in kernels 2.1 and later). A single operation "
10198 "can affect only one item in the list above (the Booleans counted as one "
10202 #. type: Plain text
10203 #: build/C/man4/st.4:428
10205 "A value having zeros in the high-order 4 bits will be used to set the "
10206 "drive's buffering mode. The buffering modes are:"
10210 #: build/C/man4/st.4:429
10215 #. type: Plain text
10216 #: build/C/man4/st.4:434
10218 "The drive will not report B<GOOD> status on write commands until the data "
10219 "blocks are actually written to the medium."
10223 #: build/C/man4/st.4:434
10228 #. type: Plain text
10229 #: build/C/man4/st.4:439
10231 "The drive may report B<GOOD> status on write commands as soon as all the "
10232 "data has been transferred to the drive's internal buffer."
10236 #: build/C/man4/st.4:439
10241 #. type: Plain text
10242 #: build/C/man4/st.4:446
10244 "The drive may report B<GOOD> status on write commands as soon as (a) all the "
10245 "data has been transferred to the drive's internal buffer, and (b) all "
10246 "buffered data from different initiators has been successfully written to the "
10250 #. type: Plain text
10251 #: build/C/man4/st.4:457
10253 "To control the write threshold the value in I<mt_count> must include the "
10254 "constant B<MT_ST_WRITE_THRESHOLD> bitwise ORed with a block count in the low "
10255 "28 bits. The block count refers to 1024-byte blocks, not the physical block "
10256 "size on the tape. The threshold cannot exceed the driver's internal buffer "
10257 "size (see DESCRIPTION, above)."
10260 #. type: Plain text
10261 #: build/C/man4/st.4:478
10263 "To set and clear the Boolean options the value in I<mt_count> must include "
10264 "one of the constants B<MT_ST_BOOLEANS>, B<MT_ST_SETBOOLEANS>, "
10265 "B<MT_ST_CLEARBOOLEANS>, or B<MT_ST_DEFBOOLEANS> bitwise ORed with whatever "
10266 "combination of the following options is desired. Using B<MT_ST_BOOLEANS> "
10267 "the options can be set to the values defined in the corresponding bits. "
10268 "With B<MT_ST_SETBOOLEANS> the options can be selectively set and with "
10269 "B<MT_ST_DEFBOOLEANS> selectively cleared."
10272 #. type: Plain text
10273 #: build/C/man4/st.4:486
10275 "The default options for a tape device are set with B<MT_ST_DEFBOOLEANS>. A "
10276 "nonactive tape device (e.g., device with minor 32 or 160) is activated when "
10277 "the default options for it are defined the first time. An activated device "
10278 "inherits from the device activated at start-up the options not set "
10282 #. type: Plain text
10283 #: build/C/man4/st.4:488
10284 msgid "The Boolean options are:"
10288 #: build/C/man4/st.4:489
10290 msgid "B<MT_ST_BUFFER_WRITES> (Default: true)"
10293 #. type: Plain text
10294 #: build/C/man4/st.4:495
10296 "Buffer all write operations in fixed-block mode. If this option is false "
10297 "and the drive uses a fixed block size, then all write operations must be for "
10298 "a multiple of the block size. This option must be set false to write "
10299 "reliable multivolume archives."
10303 #: build/C/man4/st.4:495
10305 msgid "B<MT_ST_ASYNC_WRITES> (Default: true)"
10308 #. type: Plain text
10309 #: build/C/man4/st.4:505
10311 "When this option is true, write operations return immediately without "
10312 "waiting for the data to be transferred to the drive if the data fits into "
10313 "the driver's buffer. The write threshold determines how full the buffer "
10314 "must be before a new SCSI write command is issued. Any errors reported by "
10315 "the drive will be held until the next operation. This option must be set "
10316 "false to write reliable multivolume archives."
10320 #: build/C/man4/st.4:505
10322 msgid "B<MT_ST_READ_AHEAD> (Default: true)"
10325 #. type: Plain text
10326 #: build/C/man4/st.4:511
10328 "This option causes the driver to provide read buffering and read-ahead in "
10329 "fixed-block mode. If this option is false and the drive uses a fixed block "
10330 "size, then all read operations must be for a multiple of the block size."
10334 #: build/C/man4/st.4:511
10336 msgid "B<MT_ST_TWO_FM> (Default: false)"
10339 #. type: Plain text
10340 #: build/C/man4/st.4:517
10342 "This option modifies the driver behavior when a file is closed. The normal "
10343 "action is to write a single filemark. If the option is true, the driver "
10344 "will write two filemarks and backspace over the second one."
10347 #. type: Plain text
10348 #: build/C/man4/st.4:526
10350 "Note: This option should not be set true for QIC tape drives since they are "
10351 "unable to overwrite a filemark. These drives detect the end of recorded "
10352 "data by testing for blank tape rather than two consecutive filemarks. Most "
10353 "other current drives also detect the end of recorded data and using two "
10354 "filemarks is usually necessary only when interchanging tapes with some other "
10359 #: build/C/man4/st.4:526
10361 msgid "B<MT_ST_DEBUGGING> (Default: false)"
10364 #. type: Plain text
10365 #: build/C/man4/st.4:532
10367 "This option turns on various debugging messages from the driver (effective "
10368 "only if the driver was compiled with B<DEBUG> defined nonzero)."
10372 #: build/C/man4/st.4:532
10374 msgid "B<MT_ST_FAST_EOM> (Default: false)"
10377 #. type: Plain text
10378 #: build/C/man4/st.4:546
10380 "This option causes the B<MTEOM> operation to be sent directly to the drive, "
10381 "potentially speeding up the operation but causing the driver to lose track "
10382 "of the current file number normally returned by the B<MTIOCGET> request. If "
10383 "B<MT_ST_FAST_EOM> is false, the driver will respond to an B<MTEOM> request "
10384 "by forward spacing over files."
10388 #: build/C/man4/st.4:546
10390 msgid "B<MT_ST_AUTO_LOCK> (Default: false)"
10393 #. type: Plain text
10394 #: build/C/man4/st.4:550
10396 "When this option is true, the drive door is locked when the device is opened "
10397 "and unlocked when it is closed."
10401 #: build/C/man4/st.4:550
10403 msgid "B<MT_ST_DEF_WRITES> (Default: false)"
10406 #. type: Plain text
10407 #: build/C/man4/st.4:567
10409 "The tape options (block size, mode, compression, etc.) may change when "
10410 "changing from one device linked to a drive to another device linked to the "
10411 "same drive depending on how the devices are defined. This option defines "
10412 "when the changes are enforced by the driver using SCSI-commands and when the "
10413 "drives auto-detection capabilities are relied upon. If this option is "
10414 "false, the driver sends the SCSI-commands immediately when the device is "
10415 "changed. If the option is true, the SCSI-commands are not sent until a "
10416 "write is requested. In this case, the drive firmware is allowed to detect "
10417 "the tape structure when reading and the SCSI-commands are used only to make "
10418 "sure that a tape is written according to the correct specification."
10422 #: build/C/man4/st.4:567
10424 msgid "B<MT_ST_CAN_BSR> (Default: false)"
10427 #. type: Plain text
10428 #: build/C/man4/st.4:580
10430 "When read-ahead is used, the tape must sometimes be spaced backward to the "
10431 "correct position when the device is closed and the SCSI command to space "
10432 "backward over records is used for this purpose. Some older drives can't "
10433 "process this command reliably and this option can be used to instruct the "
10434 "driver not to use the command. The end result is that, with read-ahead and "
10435 "fixed-block mode, the tape may not be correctly positioned within a file "
10436 "when the device is closed. With 2.6 kernel, the default is true for drives "
10437 "supporting SCSI-3."
10441 #: build/C/man4/st.4:580
10443 msgid "B<MT_ST_NO_BLKLIMS> (Default: false)"
10446 #. type: Plain text
10447 #: build/C/man4/st.4:589
10449 "Some drives don't accept the B<READ BLOCK LIMITS> SCSI command. If this is "
10450 "used, the driver does not use the command. The drawback is that the driver "
10451 "can't check before sending commands if the selected block size is acceptable "
10456 #: build/C/man4/st.4:589
10458 msgid "B<MT_ST_CAN_PARTITIONS> (Default: false)"
10461 #. type: Plain text
10462 #: build/C/man4/st.4:594
10464 "This option enables support for several partitions within a tape. The "
10465 "option applies to all devices linked to a drive."
10469 #: build/C/man4/st.4:594
10471 msgid "B<MT_ST_SCSI2LOGICAL> (Default: false)"
10474 #. type: Plain text
10475 #: build/C/man4/st.4:609
10477 "This option instructs the driver to use the logical block addresses defined "
10478 "in the SCSI-2 standard when performing the seek and tell operations (both "
10479 "with B<MTSEEK> and B<MTIOCPOS> commands and when changing tape partition). "
10480 "Otherwise the device-specific addresses are used. It is highly advisable to "
10481 "set this option if the drive supports the logical addresses because they "
10482 "count also filemarks. There are some drives that support only the logical "
10487 #: build/C/man4/st.4:609
10489 msgid "B<MT_ST_SYSV> (Default: false)"
10492 #. type: Plain text
10493 #: build/C/man4/st.4:620
10495 "When this option is enabled, the tape devices use the SystemV semantics. "
10496 "Otherwise the BSD semantics are used. The most important difference between "
10497 "the semantics is what happens when a device used for reading is closed: in "
10498 "System V semantics the tape is spaced forward past the next filemark if this "
10499 "has not happened while using the device. In BSD semantics the tape position "
10504 #: build/C/man4/st.4:620
10506 msgid "B<MT_NO_WAIT> (Default: false)"
10509 #. type: Plain text
10510 #: build/C/man4/st.4:624
10512 "Enables immediate mode (i.e., don't wait for the command to finish) for some "
10513 "commands (e.g., rewind)."
10516 #. type: Plain text
10517 #: build/C/man4/st.4:626
10518 msgid "An example:"
10521 #. type: Plain text
10522 #: build/C/man4/st.4:634
10525 "struct mtop mt_cmd;\n"
10526 "mt_cmd.mt_op = MTSETDRVBUFFER;\n"
10527 "mt_cmd.mt_count = MT_ST_BOOLEANS |\n"
10528 " MT_ST_BUFFER_WRITES | MT_ST_ASYNC_WRITES;\n"
10529 "ioctl(fd, MTIOCTOP, mt_cmd);\n"
10532 #. type: Plain text
10533 #: build/C/man4/st.4:644
10535 "The default block size for a device can be set with B<MT_ST_DEF_BLKSIZE> and "
10536 "the default density code can be set with B<MT_ST_DEFDENSITY>. The values "
10537 "for the parameters are or'ed with the operation code."
10540 #. type: Plain text
10541 #: build/C/man4/st.4:661
10543 "With kernels 2.1.x and later, the timeout values can be set with the "
10544 "subcommand B<MT_ST_SET_TIMEOUT> ORed with the timeout in seconds. The long "
10545 "timeout (used for rewinds and other commands that may take a long time) can "
10546 "be set with B<MT_ST_SET_LONG_TIMEOUT>. The kernel defaults are very long to "
10547 "make sure that a successful command is not timed out with any drive. "
10548 "Because of this the driver may seem stuck even if it is only waiting for the "
10549 "timeout. These commands can be used to set more practical values for a "
10550 "specific drive. The timeouts set for one device apply for all devices "
10551 "linked to the same drive."
10554 #. type: Plain text
10555 #: build/C/man4/st.4:682
10557 "Starting from kernels 2.4.19 and 2.5.43, the driver supports a status bit "
10558 "which indicates whether the drive requests cleaning. The method used by the "
10559 "drive to return cleaning information is set using the B<MT_ST_SEL_CLN> "
10560 "subcommand. If the value is zero, the cleaning bit is always zero. If the "
10561 "value is one, the TapeAlert data defined in the SCSI-3 standard is used (not "
10562 "yet implemented). Values 2-17 are reserved. If the lowest eight bits are "
10563 "E<gt>= 18, bits from the extended sense data are used. The bits 9-16 "
10564 "specify a mask to select the bits to look at and the bits 17-23 specify the "
10565 "bit pattern to look for. If the bit pattern is zero, one or more bits under "
10566 "the mask indicate the cleaning request. If the pattern is nonzero, the "
10567 "pattern must match the masked sense data byte."
10571 #: build/C/man4/st.4:682
10573 msgid "MTIOCGET \\(em get status"
10576 #. type: Plain text
10577 #: build/C/man4/st.4:686
10578 msgid "This request takes an argument of type I<(struct mtget\\ *)>."
10581 #. type: Plain text
10582 #: build/C/man4/st.4:701
10585 "/* structure for MTIOCGET - mag tape get status command */\n"
10588 " long mt_resid;\n"
10589 " /* the following registers are device dependent */\n"
10590 " long mt_dsreg;\n"
10591 " long mt_gstat;\n"
10592 " long mt_erreg;\n"
10593 " /* The next two fields are not always used */\n"
10594 " daddr_t mt_fileno;\n"
10595 " daddr_t mt_blkno;\n"
10600 #: build/C/man4/st.4:703
10605 #. type: Plain text
10606 #: build/C/man4/st.4:712
10608 "The header file defines many values for I<mt_type>, but the current driver "
10609 "reports only the generic types B<MT_ISSCSI1> (Generic SCSI-1 tape) and "
10610 "B<MT_ISSCSI2> (Generic SCSI-2 tape)."
10614 #: build/C/man4/st.4:712
10616 msgid "I<mt_resid>"
10619 #. type: Plain text
10620 #: build/C/man4/st.4:714
10621 msgid "contains the current tape partition number."
10625 #: build/C/man4/st.4:714
10627 msgid "I<mt_dsreg>"
10630 #. type: Plain text
10631 #: build/C/man4/st.4:723
10633 "reports the drive's current settings for block size (in the low 24 bits) and "
10634 "density (in the high 8 bits). These fields are defined by "
10635 "B<MT_ST_BLKSIZE_SHIFT>, B<MT_ST_BLKSIZE_MASK>, B<MT_ST_DENSITY_SHIFT>, and "
10636 "B<MT_ST_DENSITY_MASK>."
10640 #: build/C/man4/st.4:723
10642 msgid "I<mt_gstat>"
10645 #. type: Plain text
10646 #: build/C/man4/st.4:726
10648 "reports generic (device independent) status information. The header file "
10649 "defines macros for testing these status bits:"
10652 #. type: Plain text
10653 #: build/C/man4/st.4:733
10655 "B<GMT_EOF>(I<x>): The tape is positioned just after a filemark (always false "
10656 "after an B<MTSEEK> operation)."
10659 #. type: Plain text
10660 #: build/C/man4/st.4:739
10662 "B<GMT_BOT>(I<x>): The tape is positioned at the beginning of the first file "
10663 "(always false after an B<MTSEEK> operation)."
10666 #. type: Plain text
10667 #: build/C/man4/st.4:742
10668 msgid "B<GMT_EOT>(I<x>): A tape operation has reached the physical End Of Tape."
10671 #. type: Plain text
10672 #: build/C/man4/st.4:748
10674 "B<GMT_SM>(I<x>): The tape is currently positioned at a setmark (always false "
10675 "after an B<MTSEEK> operation)."
10678 #. type: Plain text
10679 #: build/C/man4/st.4:751
10680 msgid "B<GMT_EOD>(I<x>): The tape is positioned at the end of recorded data."
10683 #. type: Plain text
10684 #: build/C/man4/st.4:756
10686 "B<GMT_WR_PROT>(I<x>): The drive is write-protected. For some drives this "
10687 "can also mean that the drive does not support writing on the current medium "
10691 #. type: Plain text
10692 #: build/C/man4/st.4:761
10694 "B<GMT_ONLINE>(I<x>): The last B<open>(2) found the drive with a tape in "
10695 "place and ready for operation."
10698 #. type: Plain text
10699 #: build/C/man4/st.4:765
10701 "B<GMT_D_6250>(I<x>), B<GMT_D_1600>(I<x>), B<GMT_D_800>(I<x>): This "
10702 "\\(lqgeneric\\(rq status information reports the current density setting for "
10703 "9-track \\(12\" tape drives only."
10706 #. type: Plain text
10707 #: build/C/man4/st.4:768
10708 msgid "B<GMT_DR_OPEN>(I<x>): The drive does not have a tape in place."
10711 #. type: Plain text
10712 #: build/C/man4/st.4:776
10714 "B<GMT_IM_REP_EN>(I<x>): Immediate report mode. This bit is set if there are "
10715 "no guarantees that the data has been physically written to the tape when the "
10716 "write call returns. It is set zero only when the driver does not buffer "
10717 "data and the drive is set not to buffer data."
10720 #. type: Plain text
10721 #: build/C/man4/st.4:780
10723 "B<GMT_CLN>(I<x>): The drive has requested cleaning. Implemented in kernels "
10724 "since 2.4.19 and 2.5.43."
10728 #: build/C/man4/st.4:781
10730 msgid "I<mt_erreg>"
10733 #. type: Plain text
10734 #: build/C/man4/st.4:791
10736 "The only field defined in I<mt_erreg> is the recovered error count in the "
10737 "low 16 bits (as defined by B<MT_ST_SOFTERR_SHIFT> and "
10738 "B<MT_ST_SOFTERR_MASK>. Due to inconsistencies in the way drives report "
10739 "recovered errors, this count is often not maintained (most drives do not by "
10740 "default report soft errors but this can be changed with a SCSI MODE SELECT "
10745 #: build/C/man4/st.4:791
10747 msgid "I<mt_fileno>"
10750 #. type: Plain text
10751 #: build/C/man4/st.4:797
10753 "reports the current file number (zero-based). This value is set to -1 when "
10754 "the file number is unknown (e.g., after B<MTBSS> or B<MTSEEK>)."
10758 #: build/C/man4/st.4:797
10760 msgid "I<mt_blkno>"
10763 #. type: Plain text
10764 #: build/C/man4/st.4:804
10766 "reports the block number (zero-based) within the current file. This value "
10767 "is set to -1 when the block number is unknown (e.g., after B<MTBSF>, "
10768 "B<MTBSS>, or B<MTSEEK>)."
10772 #: build/C/man4/st.4:804
10774 msgid "MTIOCPOS \\(em get tape position"
10777 #. type: Plain text
10778 #: build/C/man4/st.4:818
10780 "This request takes an argument of type I<(struct mtpos\\ *)> and reports the "
10781 "drive's notion of the current tape block number, which is not the same as "
10782 "I<mt_blkno> returned by B<MTIOCGET>. This drive must be a SCSI-2 drive that "
10783 "supports the B<READ POSITION> command (device-specific address) or a "
10784 "Tandberg-compatible SCSI-1 drive (Tandberg, Archive Viper, Wangtek, ... )."
10787 #. type: Plain text
10788 #: build/C/man4/st.4:825
10791 "/* structure for MTIOCPOS - mag tape get position command */\n"
10793 " long mt_blkno; /* current block number */\n"
10797 #. type: Plain text
10798 #: build/C/man4/st.4:834
10800 "An attempt was made to write or erase a write-protected tape. (This error "
10801 "is not detected during B<open>(2).)"
10805 #: build/C/man4/st.4:834
10810 #. type: Plain text
10811 #: build/C/man4/st.4:838
10812 msgid "The device is already in use or the driver was unable to allocate a buffer."
10815 #. type: Plain text
10816 #: build/C/man4/st.4:842
10817 msgid "The command parameters point to memory not belonging to the calling process."
10820 #. type: Plain text
10821 #: build/C/man4/st.4:847
10823 "An B<ioctl>(2) had an invalid argument, or a requested block size was "
10828 #: build/C/man4/st.4:847
10833 #. type: Plain text
10834 #: build/C/man4/st.4:850
10835 msgid "The requested operation could not be completed."
10838 #. type: Plain text
10839 #: build/C/man4/st.4:857
10841 "The byte count in B<read>(2) is smaller than the next physical block on the "
10842 "tape. (Before 2.2.18 and 2.4.0-test6 the extra bytes have been silently "
10846 #. type: Plain text
10847 #: build/C/man4/st.4:861
10849 "A write operation could not be completed because the tape reached "
10854 #: build/C/man4/st.4:861 build/C/man2/syslog.2:278
10859 #. type: Plain text
10860 #: build/C/man4/st.4:865
10861 msgid "Unknown B<ioctl>(2)."
10865 #: build/C/man4/st.4:865
10870 #. type: Plain text
10871 #: build/C/man4/st.4:868
10872 msgid "During opening, the tape device does not exist."
10876 #: build/C/man4/st.4:868
10878 msgid "B<EOVERFLOW>"
10881 #. type: Plain text
10882 #: build/C/man4/st.4:872
10884 "An attempt was made to read or write a variable-length block that is larger "
10885 "than the driver's internal buffer."
10888 #. type: Plain text
10889 #: build/C/man4/st.4:879
10891 "Open is attempted with B<O_WRONLY> or B<O_RDWR> when the tape in the drive "
10892 "is write-protected."
10896 #: build/C/man4/st.4:880
10898 msgid "I</dev/st*>"
10901 #. type: Plain text
10902 #: build/C/man4/st.4:883
10903 msgid "the auto-rewind SCSI tape devices"
10907 #: build/C/man4/st.4:883
10909 msgid "I</dev/nst*>"
10913 #. The driver has been written by Kai M\(:akisara (Kai.Makisara@metla.fi)
10914 #. starting from a driver written by Dwayne Forsyth.
10916 #. people have also contributed to the driver.
10917 #. type: Plain text
10918 #: build/C/man4/st.4:891
10919 msgid "the nonrewind SCSI tape devices"
10922 #. type: Plain text
10923 #: build/C/man4/st.4:912
10925 "When exchanging data between systems, both systems have to agree on the "
10926 "physical tape block size. The parameters of a drive after startup are often "
10927 "not the ones most operating systems use with these devices. Most systems "
10928 "use drives in variable-block mode if the drive supports that mode. This "
10929 "applies to most modern drives, including DATs, 8mm helical scan drives, "
10930 "DLTs, etc. It may be advisable to use these drives in variable-block mode "
10931 "also in Linux (i.e., use B<MTSETBLK> or B<MTSETDEFBLK> at system startup to "
10932 "set the mode), at least when exchanging data with a foreign system. The "
10933 "drawback of this is that a fairly large tape block size has to be used to "
10934 "get acceptable data transfer rates on the SCSI bus."
10937 #. type: Plain text
10938 #: build/C/man4/st.4:919
10940 "Many programs (e.g., B<tar>(1)) allow the user to specify the blocking "
10941 "factor on the command line. Note that this determines the physical block "
10942 "size on tape only in variable-block mode."
10945 #. type: Plain text
10946 #: build/C/man4/st.4:926
10948 "In order to use SCSI tape drives, the basic SCSI driver, a SCSI-adapter "
10949 "driver and the SCSI tape driver must be either configured into the kernel or "
10950 "loaded as modules. If the SCSI-tape driver is not present, the drive is "
10951 "recognized but the tape support described in this page is not available."
10954 #. type: Plain text
10955 #: build/C/man4/st.4:931
10957 "The driver writes error messages to the console/log. The SENSE codes "
10958 "written into some messages are automatically translated to text if verbose "
10959 "SCSI messages are enabled in kernel configuration."
10963 #. Copyright \(co 1995 Robert K. Nichols.
10965 #. Copyright \(co 1999-2005 Kai M\(:akisara.
10967 #. %%%LICENSE_START(VERBATIM)
10968 #. Permission is granted to make and distribute verbatim copies of this
10969 #. manual provided the copyright notice and this permission notice are
10970 #. preserved on all copies.
10971 #. Additional permissions are contained in the header of the source file.
10972 #. type: Plain text
10973 #: build/C/man4/st.4:954
10975 "The driver's internal buffering allows good throughput in fixed-block mode "
10976 "also with small B<read>(2) and B<write>(2) byte counts. With direct "
10977 "transfers this is not possible and may cause a surprise when moving to the "
10978 "2.6 kernel. The solution is to tell the software to use larger transfers "
10979 "(often telling it to use larger blocks). If this is not possible, direct "
10980 "transfers can be disabled."
10983 #. type: Plain text
10984 #: build/C/man4/st.4:956
10988 #. type: Plain text
10989 #: build/C/man4/st.4:964
10991 "The file I<drivers/scsi/README.st> or I<Documentation/scsi/st.txt> (kernel "
10992 "E<gt>= 2.6) in the Linux kernel source tree contains the most recent "
10993 "information about the driver and its configuration possibilities"
10997 #: build/C/man3/stdarg.3:43
11003 #: build/C/man3/stdarg.3:43
11008 #. type: Plain text
11009 #: build/C/man3/stdarg.3:46
11010 msgid "stdarg, va_start, va_arg, va_end, va_copy - variable argument lists"
11013 #. type: Plain text
11014 #: build/C/man3/stdarg.3:48 build/C/man3/syslog.3:49
11015 msgid "B<#include E<lt>stdarg.hE<gt>>"
11018 #. type: Plain text
11019 #: build/C/man3/stdarg.3:50
11020 msgid "B<void va_start(va_list >I<ap>B<, >I<last>B<);>"
11023 #. type: Plain text
11024 #: build/C/man3/stdarg.3:52
11025 msgid "I<type>B< va_arg(va_list >I<ap>B<, >I<type>B<);>"
11028 #. type: Plain text
11029 #: build/C/man3/stdarg.3:54
11030 msgid "B<void va_end(va_list >I<ap>B<);>"
11033 #. type: Plain text
11034 #: build/C/man3/stdarg.3:56
11035 msgid "B<void va_copy(va_list >I<dest>B<, va_list >I<src>B<);>"
11038 #. type: Plain text
11039 #: build/C/man3/stdarg.3:65
11041 "A function may be called with a varying number of arguments of varying "
11042 "types. The include file I<E<lt>stdarg.hE<gt>> declares a type I<va_list> "
11043 "and defines three macros for stepping through a list of arguments whose "
11044 "number and types are not known to the called function."
11047 #. type: Plain text
11048 #: build/C/man3/stdarg.3:73
11050 "The called function must declare an object of type I<va_list> which is used "
11051 "by the macros B<va_start>(), B<va_arg>(), and B<va_end>()."
11055 #: build/C/man3/stdarg.3:73
11060 #. type: Plain text
11061 #: build/C/man3/stdarg.3:83
11063 "The B<va_start>() macro initializes I<ap> for subsequent use by B<va_arg>() "
11064 "and B<va_end>(), and must be called first."
11067 #. type: Plain text
11068 #: build/C/man3/stdarg.3:88
11070 "The argument I<last> is the name of the last argument before the variable "
11071 "argument list, that is, the last argument of which the calling function "
11075 #. type: Plain text
11076 #: build/C/man3/stdarg.3:93
11078 "Because the address of this argument may be used in the B<va_start>() "
11079 "macro, it should not be declared as a register variable, or as a function or "
11084 #: build/C/man3/stdarg.3:93
11089 #. type: Plain text
11090 #: build/C/man3/stdarg.3:115
11092 "The B<va_arg>() macro expands to an expression that has the type and value "
11093 "of the next argument in the call. The argument I<ap> is the I<va_list> "
11094 "I<ap> initialized by B<va_start>(). Each call to B<va_arg>() modifies "
11095 "I<ap> so that the next call returns the next argument. The argument I<type> "
11096 "is a type name specified so that the type of a pointer to an object that has "
11097 "the specified type can be obtained simply by adding a * to I<type>."
11100 #. type: Plain text
11101 #: build/C/man3/stdarg.3:123
11103 "The first use of the B<va_arg>() macro after that of the B<va_start>() "
11104 "macro returns the argument after I<last>. Successive invocations return the "
11105 "values of the remaining arguments."
11108 #. type: Plain text
11109 #: build/C/man3/stdarg.3:128
11111 "If there is no next argument, or if I<type> is not compatible with the type "
11112 "of the actual next argument (as promoted according to the default argument "
11113 "promotions), random errors will occur."
11116 #. type: Plain text
11117 #: build/C/man3/stdarg.3:136
11119 "If I<ap> is passed to a function that uses B<va_arg(>I<ap>B<,>I<type>B<),> "
11120 "then the value of I<ap> is undefined after the return of that function."
11124 #: build/C/man3/stdarg.3:136
11129 #. type: Plain text
11130 #: build/C/man3/stdarg.3:155
11132 "Each invocation of B<va_start>() must be matched by a corresponding "
11133 "invocation of B<va_end>() in the same function. After the call "
11134 "B<va_end(>I<ap>B<)> the variable I<ap> is undefined. Multiple traversals of "
11135 "the list, each bracketed by B<va_start>() and B<va_end>() are possible. "
11136 "B<va_end>() may be a macro or a function."
11140 #: build/C/man3/stdarg.3:155
11145 #. type: Plain text
11146 #: build/C/man3/stdarg.3:172
11148 "The B<va_copy>() macro copies the (previously initialized) variable "
11149 "argument list I<src> to I<dest>. The behavior is as if B<va_start>() were "
11150 "applied to I<dest> with the same I<last> argument, followed by the same "
11151 "number of B<va_arg>() invocations that was used to reach the current state "
11155 #. Proposal from clive@demon.net, 1997-02-28
11156 #. type: Plain text
11157 #: build/C/man3/stdarg.3:179
11159 "An obvious implementation would have a I<va_list> be a pointer to the stack "
11160 "frame of the variadic function. In such a setup (by far the most common) "
11161 "there seems nothing against an assignment"
11164 #. type: Plain text
11165 #: build/C/man3/stdarg.3:183
11167 msgid "va_list aq = ap;\n"
11170 #. type: Plain text
11171 #: build/C/man3/stdarg.3:188
11173 "Unfortunately, there are also systems that make it an array of pointers (of "
11174 "length 1), and there one needs"
11177 #. type: Plain text
11178 #: build/C/man3/stdarg.3:193
11185 #. type: Plain text
11186 #: build/C/man3/stdarg.3:209
11188 "Finally, on systems where arguments are passed in registers, it may be "
11189 "necessary for B<va_start>() to allocate memory, store the arguments there, "
11190 "and also an indication of which argument is next, so that B<va_arg>() can "
11191 "step through the list. Now B<va_end>() can free the allocated memory "
11192 "again. To accommodate this situation, C99 adds a macro B<va_copy>(), so "
11193 "that the above assignment can be replaced by"
11196 #. type: Plain text
11197 #: build/C/man3/stdarg.3:216
11201 "va_copy(aq, ap);\n"
11206 #. type: Plain text
11207 #: build/C/man3/stdarg.3:229
11209 "Each invocation of B<va_copy>() must be matched by a corresponding "
11210 "invocation of B<va_end>() in the same function. Some systems that do not "
11211 "supply B<va_copy>() have B<__va_copy> instead, since that was the name used "
11212 "in the draft proposal."
11215 #. type: Plain text
11216 #: build/C/man3/stdarg.3:238
11218 "The B<va_start>(), B<va_arg>(), B<va_end>(), and B<va_copy>() macros are "
11222 #. type: Plain text
11223 #: build/C/man3/stdarg.3:248
11225 "The B<va_start>(), B<va_arg>(), and B<va_end>() macros conform to C89. C99 "
11226 "defines the B<va_copy>() macro."
11229 #. type: Plain text
11230 #: build/C/man3/stdarg.3:254
11232 "These macros are I<not> compatible with the historic macros they replace. A "
11233 "backward-compatible version can be found in the include file "
11234 "I<E<lt>varargs.hE<gt>>."
11237 #. type: Plain text
11238 #: build/C/man3/stdarg.3:256
11239 msgid "The historic setup is:"
11242 #. type: Plain text
11243 #: build/C/man3/stdarg.3:260
11245 msgid "#include E<lt>varargs.hE<gt>\n"
11248 #. type: Plain text
11249 #: build/C/man3/stdarg.3:266
11259 #. type: Plain text
11260 #: build/C/man3/stdarg.3:275
11266 " x = va_arg(ap, type);\n"
11273 #. type: Plain text
11274 #: build/C/man3/stdarg.3:284
11276 "On some systems, I<va_end> contains a closing \\(aq}\\(aq matching a "
11277 "\\(aq{\\(aq in I<va_start>, so that both macros must occur in the same "
11278 "function, and in a way that allows this."
11281 #. type: Plain text
11282 #: build/C/man3/stdarg.3:300
11284 "Unlike the B<varargs> macros, the B<stdarg> macros do not permit programmers "
11285 "to code a function with no fixed arguments. This problem generates work "
11286 "mainly when converting B<varargs> code to B<stdarg> code, but it also "
11287 "creates difficulties for variadic functions that wish to pass all of their "
11288 "arguments on to a function that takes a I<va_list> argument, such as "
11292 #. type: Plain text
11293 #: build/C/man3/stdarg.3:305
11295 "The function I<foo> takes a string of format characters and prints out the "
11296 "argument associated with each format character based on the type."
11299 #. type: Plain text
11300 #: build/C/man3/stdarg.3:309
11303 "#include E<lt>stdio.hE<gt>\n"
11304 "#include E<lt>stdarg.hE<gt>\n"
11307 #. type: Plain text
11308 #: build/C/man3/stdarg.3:316
11312 "foo(char *fmt, ...)\n"
11319 #. type: Plain text
11320 #: build/C/man3/stdarg.3:337
11323 " va_start(ap, fmt);\n"
11325 " switch (*fmt++) {\n"
11326 " case \\(aqs\\(aq: /* string */\n"
11327 " s = va_arg(ap, char *);\n"
11328 " printf(\"string %s\\en\", s);\n"
11330 " case \\(aqd\\(aq: /* int */\n"
11331 " d = va_arg(ap, int);\n"
11332 " printf(\"int %d\\en\", d);\n"
11334 " case \\(aqc\\(aq: /* char */\n"
11335 " /* need a cast here since va_arg only\n"
11336 " takes fully promoted types */\n"
11337 " c = (char) va_arg(ap, int);\n"
11338 " printf(\"char %c\\en\", c);\n"
11346 #: build/C/man2/syslog.2:31 build/C/man3/syslog.3:36
11352 #: build/C/man2/syslog.2:31
11357 #. type: Plain text
11358 #: build/C/man2/syslog.2:35
11360 "syslog, klogctl - read and/or clear kernel message ring buffer; set "
11364 #. type: Plain text
11365 #: build/C/man2/syslog.2:39
11368 "B<int syslog(int >I<type>B<, char *>I<bufp>B<, int >I<len>B<);>\n"
11369 "B</* No wrapper provided in glibc */>\n"
11372 #. type: Plain text
11373 #: build/C/man2/syslog.2:41
11375 msgid "/* The glibc interface */\n"
11378 #. type: Plain text
11379 #: build/C/man2/syslog.2:43
11381 msgid "B<#include E<lt>sys/klog.hE<gt>>\n"
11384 #. type: Plain text
11385 #: build/C/man2/syslog.2:45
11387 msgid "B<int klogctl(int >I<type>B<, char *>I<bufp>B<, int >I<len>B<);>\n"
11390 #. type: Plain text
11391 #: build/C/man2/syslog.2:57
11393 "If you need the C library function B<syslog>() (which talks to "
11394 "B<syslogd>(8)), then look at B<syslog>(3). The system call of this name is "
11395 "about controlling the kernel I<printk>() buffer, and the glibc wrapper "
11396 "function is called B<klogctl>()."
11400 #: build/C/man2/syslog.2:57
11402 msgid "The kernel log buffer"
11405 #. Under "General setup" ==> "Kernel log buffer size"
11406 #. For 2.6, precisely the option seems to have appeared in 2.5.55.
11407 #. type: Plain text
11408 #: build/C/man2/syslog.2:73
11410 "The kernel has a cyclic buffer of length B<LOG_BUF_LEN> in which messages "
11411 "given as arguments to the kernel function B<printk>() are stored "
11412 "(regardless of their loglevel). In early kernels, B<LOG_BUF_LEN> had the "
11413 "value 4096; from kernel 1.3.54, it was 8192; from kernel 2.1.113 it was "
11414 "16384; since 2.4.23/2.6 the value is a kernel configuration option "
11415 "(B<CONFIG_LOG_BUF_SHIFT>). In recent kernels the size can be queried with "
11416 "command type 10 (see below)."
11420 #: build/C/man2/syslog.2:73
11425 #. type: Plain text
11426 #: build/C/man2/syslog.2:80
11428 "The I<type> argument determines the action taken by this function. The list "
11429 "below specifies the values for I<type>. The symbolic names are defined in "
11430 "the kernel source, but are not exported to user space; you will either need "
11431 "to use the numbers, or define the names yourself."
11435 #: build/C/man2/syslog.2:80
11437 msgid "B<SYSLOG_ACTION_CLOSE> (0)"
11440 #. type: Plain text
11441 #: build/C/man2/syslog.2:84
11442 msgid "Close the log. Currently a NOP."
11446 #: build/C/man2/syslog.2:84
11448 msgid "B<SYSLOG_ACTION_OPEN> (1)"
11451 #. type: Plain text
11452 #: build/C/man2/syslog.2:88
11453 msgid "Open the log. Currently a NOP."
11457 #: build/C/man2/syslog.2:88
11459 msgid "B<SYSLOG_ACTION_READ> (2)"
11462 #. type: Plain text
11463 #: build/C/man2/syslog.2:100
11465 "Read from the log. The call waits until the kernel log buffer is nonempty, "
11466 "and then reads at most I<len> bytes into the buffer pointed to by I<bufp>. "
11467 "The call returns the number of bytes read. Bytes read from the log "
11468 "disappear from the log buffer: the information can be read only once. This "
11469 "is the function executed by the kernel when a user program reads "
11474 #: build/C/man2/syslog.2:100
11476 msgid "B<SYSLOG_ACTION_READ_ALL> (3)"
11479 #. type: Plain text
11480 #: build/C/man2/syslog.2:110
11482 "Read all messages remaining in the ring buffer, placing then in the buffer "
11483 "pointed to by I<bufp>. The call reads the last I<len> bytes from the log "
11484 "buffer (nondestructively), but will not read more than was written into the "
11485 "buffer since the last \"clear ring buffer\" command (see command 5 below)). "
11486 "The call returns the number of bytes read."
11490 #: build/C/man2/syslog.2:110
11492 msgid "B<SYSLOG_ACTION_READ_CLEAR> (4)"
11495 #. type: Plain text
11496 #: build/C/man2/syslog.2:116
11498 "Read and clear all messages remaining in the ring buffer. The call does "
11499 "precisely the same as for a I<type> of 3, but also executes the \"clear ring "
11500 "buffer\" command."
11504 #: build/C/man2/syslog.2:116
11506 msgid "B<SYSLOG_ACTION_CLEAR> (5)"
11509 #. type: Plain text
11510 #: build/C/man2/syslog.2:124
11512 "The call executes just the \"clear ring buffer\" command. The I<bufp> and "
11513 "I<len> arguments are ignored."
11516 #. type: Plain text
11517 #: build/C/man2/syslog.2:135
11519 "This command does not really clear the ring buffer. Rather, it sets a "
11520 "kernel bookkeeping variable that determines the results returned by commands "
11521 "3 (B<SYSLOG_ACTION_READ_ALL>) and 4 (B<SYSLOG_ACTION_READ_CLEAR>). This "
11522 "command has no effect on commands 2 (B<SYSLOG_ACTION_READ>) and 9 "
11523 "(B<SYSLOG_ACTION_SIZE_UNREAD>)."
11527 #: build/C/man2/syslog.2:135
11529 msgid "B<SYSLOG_ACTION_CONSOLE_OFF> (6)"
11532 #. type: Plain text
11533 #: build/C/man2/syslog.2:145
11535 "Disable printk to console. The call sets the console log level to the "
11536 "minimum, so that no messages are printed to the console. The I<bufp> and "
11537 "I<len> arguments are ignored."
11541 #: build/C/man2/syslog.2:145
11543 msgid "B<SYSLOG_ACTION_CONSOLE_ON> (7)"
11546 #. type: Plain text
11547 #: build/C/man2/syslog.2:154
11549 "The call sets the console log level to the default, so that messages are "
11550 "printed to the console. The I<bufp> and I<len> arguments are ignored."
11554 #: build/C/man2/syslog.2:154
11556 msgid "B<SYSLOG_ACTION_CONSOLE_LEVEL> (8)"
11559 #. type: Plain text
11560 #: build/C/man2/syslog.2:165
11562 "The call sets the console log level to the value given in I<len>, which must "
11563 "be an integer between 1 and 8 (inclusive). See the B<loglevel> section for "
11564 "details. The I<bufp> argument is ignored."
11568 #: build/C/man2/syslog.2:165
11570 msgid "B<SYSLOG_ACTION_SIZE_UNREAD> (9) (since Linux 2.4.10)"
11573 #. type: Plain text
11574 #: build/C/man2/syslog.2:176
11576 "The call returns the number of bytes currently available to be read from the "
11577 "kernel log buffer via command 2 (B<SYSLOG_ACTION_READ>). The I<bufp> and "
11578 "I<len> arguments are ignored."
11582 #: build/C/man2/syslog.2:176
11584 msgid "B<SYSLOG_ACTION_SIZE_BUFFER> (10) (since Linux 2.6.6)"
11587 #. type: Plain text
11588 #: build/C/man2/syslog.2:184
11590 "This command returns the total size of the kernel log buffer. The I<bufp> "
11591 "and I<len> arguments are ignored."
11594 #. type: Plain text
11595 #: build/C/man2/syslog.2:201
11597 "All commands except 3 and 10 require privilege. In Linux kernels before "
11598 "2.6.37, command types 3 and 10 are allowed to unprivileged processes; since "
11599 "Linux 2.6.37, these commands are allowed to unprivileged processes only if "
11600 "I</proc/sys/kernel/dmesg_restrict> has the value 0. Before Linux 2.6.37, "
11601 "\"privileged\" means that the caller has the B<CAP_SYS_ADMIN> capability. "
11602 "Since Linux 2.6.37, \"privileged\" means that the caller has either the "
11603 "B<CAP_SYS_ADMIN> capability (now deprecated for this purpose) or the (new) "
11604 "B<CAP_SYSLOG> capability."
11608 #: build/C/man2/syslog.2:201
11610 msgid "The loglevel"
11613 #. type: Plain text
11614 #: build/C/man2/syslog.2:223
11616 "The kernel routine B<printk>() will only print a message on the console, if "
11617 "it has a loglevel less than the value of the variable I<console_loglevel>. "
11618 "This variable initially has the value B<DEFAULT_CONSOLE_LOGLEVEL> (7), but "
11619 "is set to 10 if the kernel command line contains the word \"debug\", and to "
11620 "15 in case of a kernel fault (the 10 and 15 are just silly, and equivalent "
11621 "to 8). This variable is set (to a value in the range 1-8) by a B<syslog>() "
11622 "call with a I<type> of 8. Calls to B<syslog>() with I<type> equal to 6 or "
11623 "7 set the variable to 1 (kernel panics only) or 7 (all except debugging "
11624 "messages), respectively."
11627 #. type: Plain text
11628 #: build/C/man2/syslog.2:233
11630 "Every text line in a message has its own loglevel. This level is "
11631 "I<DEFAULT_MESSAGE_LOGLEVEL - 1> (6) unless the line starts with E<lt>dE<gt> "
11632 "where I<d> is a digit in the range 1-7, in which case the level is I<d>. "
11633 "The conventional meaning of the loglevel is defined in "
11634 "I<E<lt>linux/kernel.hE<gt>> as follows:"
11637 #. type: Plain text
11638 #: build/C/man2/syslog.2:243
11641 "#define KERN_EMERG \"E<lt>0E<gt>\" /* system is unusable "
11643 "#define KERN_ALERT \"E<lt>1E<gt>\" /* action must be taken immediately "
11645 "#define KERN_CRIT \"E<lt>2E<gt>\" /* critical conditions "
11647 "#define KERN_ERR \"E<lt>3E<gt>\" /* error conditions "
11649 "#define KERN_WARNING \"E<lt>4E<gt>\" /* warning conditions "
11651 "#define KERN_NOTICE \"E<lt>5E<gt>\" /* normal but significant condition "
11653 "#define KERN_INFO \"E<lt>6E<gt>\" /* informational "
11655 "#define KERN_DEBUG \"E<lt>7E<gt>\" /* debug-level messages "
11659 #. type: Plain text
11660 #: build/C/man2/syslog.2:257
11662 "For I<type> equal to 2, 3, or 4, a successful call to B<syslog>() returns "
11663 "the number of bytes read. For I<type> 9, B<syslog>() returns the number of "
11664 "bytes currently available to be read on the kernel log buffer. For I<type> "
11665 "10, B<syslog>() returns the total size of the kernel log buffer. For other "
11666 "values of I<type>, 0 is returned on success."
11669 #. type: Plain text
11670 #: build/C/man2/syslog.2:260
11671 msgid "In case of error, -1 is returned, and I<errno> is set to indicate the error."
11674 #. type: Plain text
11675 #: build/C/man2/syslog.2:278
11677 "Bad arguments (e.g., bad I<type>; or for I<type> 2, 3, or 4, I<buf> is NULL, "
11678 "or I<len> is less than zero; or for I<type> 8, the I<level> is outside the "
11682 #. type: Plain text
11683 #: build/C/man2/syslog.2:285
11685 "This B<syslog>() system call is not available, because the kernel was "
11686 "compiled with the B<CONFIG_PRINTK> kernel-configuration option disabled."
11689 #. type: Plain text
11690 #: build/C/man2/syslog.2:294
11692 "An attempt was made to change console_loglevel or clear the kernel message "
11693 "ring buffer by a process without sufficient privilege (more precisely: "
11694 "without the B<CAP_SYS_ADMIN> or B<CAP_SYSLOG> capability)."
11698 #: build/C/man2/syslog.2:294
11700 msgid "B<ERESTARTSYS>"
11703 #. type: Plain text
11704 #: build/C/man2/syslog.2:298
11706 "System call was interrupted by a signal; nothing was read. (This can be "
11707 "seen only during a trace.)"
11710 #. type: Plain text
11711 #: build/C/man2/syslog.2:301
11713 "This system call is Linux-specific and should not be used in programs "
11714 "intended to be portable."
11717 #. In libc4 and libc5 the number of this call was defined by
11719 #. In glibc 2.0 the syscall is baptized
11721 #. type: Plain text
11722 #: build/C/man2/syslog.2:309
11724 "From the very start people noted that it is unfortunate that a system call "
11725 "and a library routine of the same name are entirely different animals."
11728 #. type: Plain text
11729 #: build/C/man2/syslog.2:312
11730 msgid "B<syslog>(3), B<capabilities>(7)"
11734 #: build/C/man3/syslog.3:36
11739 #. type: Plain text
11740 #: build/C/man3/syslog.3:39
11741 msgid "closelog, openlog, syslog, vsyslog - send messages to the system logger"
11744 #. type: Plain text
11745 #: build/C/man3/syslog.3:41
11746 msgid "B<#include E<lt>syslog.hE<gt>>"
11749 #. type: Plain text
11750 #: build/C/man3/syslog.3:43
11752 "B<void openlog(const char *>I<ident>B<, int >I<option>B<, int "
11753 ">I<facility>B<);>"
11756 #. type: Plain text
11757 #: build/C/man3/syslog.3:45
11758 msgid "B<void syslog(int >I<priority>B<, const char *>I<format>B<, ...);>"
11761 #. type: Plain text
11762 #: build/C/man3/syslog.3:47
11763 msgid "B<void closelog(void);>"
11766 #. type: Plain text
11767 #: build/C/man3/syslog.3:51
11769 "B<void vsyslog(int >I<priority>B<, const char *>I<format>B<, va_list "
11773 #. type: Plain text
11774 #: build/C/man3/syslog.3:59
11775 msgid "B<vsyslog>(): _BSD_SOURCE"
11778 #. type: Plain text
11779 #: build/C/man3/syslog.3:65
11781 "B<closelog>() closes the descriptor being used to write to the system "
11782 "logger. The use of B<closelog>() is optional."
11785 #. type: Plain text
11786 #: build/C/man3/syslog.3:77
11788 "B<openlog>() opens a connection to the system logger for a program. The "
11789 "string pointed to by I<ident> is prepended to every message, and is "
11790 "typically set to the program name. If I<ident> is NULL, the program name is "
11791 "used. (POSIX.1-2008 does not specify the behavior when I<ident> is NULL.)"
11794 #. type: Plain text
11795 #: build/C/man3/syslog.3:101
11797 "The I<option> argument specifies flags which control the operation of "
11798 "B<openlog>() and subsequent calls to B<syslog>(). The I<facility> argument "
11799 "establishes a default to be used if none is specified in subsequent calls to "
11800 "B<syslog>(). Values for I<option> and I<facility> are given below. The use "
11801 "of B<openlog>() is optional; it will automatically be called by B<syslog>() "
11802 "if necessary, in which case I<ident> will default to NULL."
11805 #. type: Plain text
11806 #: build/C/man3/syslog.3:125
11808 "B<syslog>() generates a log message, which will be distributed by "
11809 "B<syslogd>(8). The I<priority> argument is formed by ORing the I<facility> "
11810 "and the I<level> values (explained below). The remaining arguments are a "
11811 "I<format>, as in B<printf>(3) and any arguments required by the I<format>, "
11812 "except that the two character sequence B<%m> will be replaced by the error "
11813 "message string I<strerror>(I<errno>). A trailing newline may be added if "
11817 #. type: Plain text
11818 #: build/C/man3/syslog.3:134
11820 "The function B<vsyslog>() performs the same task as B<syslog>() with the "
11821 "difference that it takes a set of arguments which have been obtained using "
11822 "the B<stdarg>(3) variable argument list macros."
11825 #. type: Plain text
11826 #: build/C/man3/syslog.3:137
11828 "The subsections below list the parameters used to set the values of "
11829 "I<option>,I< facility>, and I<priority>."
11833 #: build/C/man3/syslog.3:137
11838 #. type: Plain text
11839 #: build/C/man3/syslog.3:143
11840 msgid "The I<option> argument to B<openlog>() is an OR of any of these:"
11844 #: build/C/man3/syslog.3:143
11846 msgid "B<LOG_CONS>"
11849 #. type: Plain text
11850 #: build/C/man3/syslog.3:147
11852 "Write directly to system console if there is an error while sending to "
11857 #: build/C/man3/syslog.3:147
11859 msgid "B<LOG_NDELAY>"
11862 #. type: Plain text
11863 #: build/C/man3/syslog.3:151
11865 "Open the connection immediately (normally, the connection is opened when the "
11866 "first message is logged)."
11870 #: build/C/man3/syslog.3:151
11872 msgid "B<LOG_NOWAIT>"
11875 #. type: Plain text
11876 #: build/C/man3/syslog.3:157
11878 "Don't wait for child processes that may have been created while logging the "
11879 "message. (The GNU C library does not create a child process, so this option "
11880 "has no effect on Linux.)"
11884 #: build/C/man3/syslog.3:157
11886 msgid "B<LOG_ODELAY>"
11889 #. type: Plain text
11890 #: build/C/man3/syslog.3:165
11892 "The converse of B<LOG_NDELAY>; opening of the connection is delayed until "
11893 "B<syslog>() is called. (This is the default, and need not be specified.)"
11897 #: build/C/man3/syslog.3:165
11899 msgid "B<LOG_PERROR>"
11902 #. type: Plain text
11903 #: build/C/man3/syslog.3:169
11904 msgid "(Not in POSIX.1-2001 or POSIX.1-2008.) Print to I<stderr> as well."
11908 #: build/C/man3/syslog.3:169
11913 #. type: Plain text
11914 #: build/C/man3/syslog.3:172
11915 msgid "Include PID with each message."
11919 #: build/C/man3/syslog.3:172
11924 #. type: Plain text
11925 #: build/C/man3/syslog.3:178
11927 "The I<facility> argument is used to specify what type of program is logging "
11928 "the message. This lets the configuration file specify that messages from "
11929 "different facilities will be handled differently."
11933 #: build/C/man3/syslog.3:178
11935 msgid "B<LOG_AUTH>"
11938 #. type: Plain text
11939 #: build/C/man3/syslog.3:181
11940 msgid "security/authorization messages"
11944 #: build/C/man3/syslog.3:181
11946 msgid "B<LOG_AUTHPRIV>"
11949 #. type: Plain text
11950 #: build/C/man3/syslog.3:184
11951 msgid "security/authorization messages (private)"
11955 #: build/C/man3/syslog.3:184
11957 msgid "B<LOG_CRON>"
11960 #. type: Plain text
11961 #: build/C/man3/syslog.3:188
11962 msgid "clock daemon (B<cron> and B<at>)"
11966 #: build/C/man3/syslog.3:188
11968 msgid "B<LOG_DAEMON>"
11971 #. type: Plain text
11972 #: build/C/man3/syslog.3:191
11973 msgid "system daemons without separate facility value"
11977 #: build/C/man3/syslog.3:191
11982 #. type: Plain text
11983 #: build/C/man3/syslog.3:194
11988 #: build/C/man3/syslog.3:194
11990 msgid "B<LOG_KERN>"
11993 #. LOG_KERN has the value 0; if used as a facility, zero translates to:
11994 #. "use the default facility".
11995 #. type: Plain text
11996 #: build/C/man3/syslog.3:199
11997 msgid "kernel messages (these can't be generated from user processes)"
12001 #: build/C/man3/syslog.3:199
12003 msgid "B<LOG_LOCAL0> through B<LOG_LOCAL7>"
12006 #. type: Plain text
12007 #: build/C/man3/syslog.3:202
12008 msgid "reserved for local use"
12012 #: build/C/man3/syslog.3:202
12017 #. type: Plain text
12018 #: build/C/man3/syslog.3:205
12019 msgid "line printer subsystem"
12023 #: build/C/man3/syslog.3:205
12025 msgid "B<LOG_MAIL>"
12028 #. type: Plain text
12029 #: build/C/man3/syslog.3:208
12030 msgid "mail subsystem"
12034 #: build/C/man3/syslog.3:208
12036 msgid "B<LOG_NEWS>"
12039 #. type: Plain text
12040 #: build/C/man3/syslog.3:211
12041 msgid "USENET news subsystem"
12045 #: build/C/man3/syslog.3:211
12047 msgid "B<LOG_SYSLOG>"
12050 #. type: Plain text
12051 #: build/C/man3/syslog.3:215
12052 msgid "messages generated internally by B<syslogd>(8)"
12056 #: build/C/man3/syslog.3:215
12058 msgid "B<LOG_USER> (default)"
12061 #. type: Plain text
12062 #: build/C/man3/syslog.3:218
12063 msgid "generic user-level messages"
12067 #: build/C/man3/syslog.3:218
12069 msgid "B<LOG_UUCP>"
12072 #. type: Plain text
12073 #: build/C/man3/syslog.3:221
12074 msgid "UUCP subsystem"
12078 #: build/C/man3/syslog.3:221
12083 #. type: Plain text
12084 #: build/C/man3/syslog.3:224
12086 "This determines the importance of the message. The levels are, in order of "
12087 "decreasing importance:"
12091 #: build/C/man3/syslog.3:224
12093 msgid "B<LOG_EMERG>"
12096 #. type: Plain text
12097 #: build/C/man3/syslog.3:227
12098 msgid "system is unusable"
12102 #: build/C/man3/syslog.3:227
12104 msgid "B<LOG_ALERT>"
12107 #. type: Plain text
12108 #: build/C/man3/syslog.3:230
12109 msgid "action must be taken immediately"
12113 #: build/C/man3/syslog.3:230
12115 msgid "B<LOG_CRIT>"
12118 #. type: Plain text
12119 #: build/C/man3/syslog.3:233
12120 msgid "critical conditions"
12124 #: build/C/man3/syslog.3:233
12129 #. type: Plain text
12130 #: build/C/man3/syslog.3:236
12131 msgid "error conditions"
12135 #: build/C/man3/syslog.3:236
12137 msgid "B<LOG_WARNING>"
12140 #. type: Plain text
12141 #: build/C/man3/syslog.3:239
12142 msgid "warning conditions"
12146 #: build/C/man3/syslog.3:239
12148 msgid "B<LOG_NOTICE>"
12151 #. type: Plain text
12152 #: build/C/man3/syslog.3:242
12153 msgid "normal, but significant, condition"
12157 #: build/C/man3/syslog.3:242
12159 msgid "B<LOG_INFO>"
12162 #. type: Plain text
12163 #: build/C/man3/syslog.3:245
12164 msgid "informational message"
12168 #: build/C/man3/syslog.3:245
12170 msgid "B<LOG_DEBUG>"
12173 #. type: Plain text
12174 #: build/C/man3/syslog.3:248
12175 msgid "debug-level message"
12178 #. type: Plain text
12179 #: build/C/man3/syslog.3:252
12181 "The function B<setlogmask>(3) can be used to restrict logging to specified "
12188 #. function call appeared in 4.2BSD.
12189 #. 4.3BSD documents
12192 #. .BR closelog (),
12194 #. .BR setlogmask ().
12195 #. 4.3BSD-Reno also documents
12197 #. Of course early v* functions used the
12199 #. mechanism, which is not compatible with
12200 #. .IR <stdarg.h> .
12201 #. type: Plain text
12202 #: build/C/man3/syslog.3:296
12204 "The functions B<openlog>(), B<closelog>(), and B<syslog>() (but not "
12205 "B<vsyslog>()) are specified in SUSv2, POSIX.1-2001, and POSIX.1-2008. "
12206 "POSIX.1-2001 specifies only the B<LOG_USER> and B<LOG_LOCAL*> values for "
12207 "I<facility>. However, with the exception of B<LOG_AUTHPRIV> and B<LOG_FTP>, "
12208 "the other I<facility> values appear on most UNIX systems. The B<LOG_PERROR> "
12209 "value for I<option> is not specified by POSIX.1-2001 or POSIX.1-2008, but is "
12210 "available in most versions of UNIX."
12213 #. type: Plain text
12214 #: build/C/man3/syslog.3:308
12216 "The argument I<ident> in the call of B<openlog>() is probably stored "
12217 "as-is. Thus, if the string it points to is changed, B<syslog>() may start "
12218 "prepending the changed string, and if the string it points to ceases to "
12219 "exist, the results are undefined. Most portable is to use a string "
12223 #. type: Plain text
12224 #: build/C/man3/syslog.3:311
12226 "Never pass a string with user-supplied data as a format, use the following "
12230 #. type: Plain text
12231 #: build/C/man3/syslog.3:314
12233 msgid " syslog(priority, \"%s\", string);\n"
12236 #. type: Plain text
12237 #: build/C/man3/syslog.3:320
12238 msgid "B<logger>(1), B<setlogmask>(3), B<syslog.conf>(5), B<syslogd>(8)"
12242 #: build/C/man4/ttyS.4:26
12248 #: build/C/man4/ttyS.4:26
12253 #. type: Plain text
12254 #: build/C/man4/ttyS.4:29
12255 msgid "ttyS - serial terminal lines"
12258 #. type: Plain text
12259 #: build/C/man4/ttyS.4:32
12260 msgid "B<ttyS[0-3]> are character devices for the serial terminal lines."
12263 #. type: Plain text
12264 #: build/C/man4/ttyS.4:37
12265 msgid "mknod -m 660 /dev/ttyS0 c 4 64 # base address 0x3f8"
12268 #. type: Plain text
12269 #: build/C/man4/ttyS.4:39
12270 msgid "mknod -m 660 /dev/ttyS1 c 4 65 # base address 0x2f8"
12273 #. type: Plain text
12274 #: build/C/man4/ttyS.4:41
12275 msgid "mknod -m 660 /dev/ttyS2 c 4 66 # base address 0x3e8"
12278 #. type: Plain text
12279 #: build/C/man4/ttyS.4:43
12280 msgid "mknod -m 660 /dev/ttyS3 c 4 67 # base address 0x2e8"
12283 #. type: Plain text
12284 #: build/C/man4/ttyS.4:45
12285 msgid "chown root:tty /dev/ttyS[0-3]"
12288 #. type: Plain text
12289 #: build/C/man4/ttyS.4:48
12290 msgid "/dev/ttyS[0-3]"
12293 #. type: Plain text
12294 #: build/C/man4/ttyS.4:55
12296 "B<chown>(1), B<mknod>(1), B<tty>(4), B<agetty>(8), B<mingetty>(8), "
12301 #: build/C/man7/uri.7:48
12307 #: build/C/man7/uri.7:48
12312 #. type: Plain text
12313 #: build/C/man7/uri.7:51
12314 msgid "uri, url, urn - uniform resource identifier (URI), including a URL or URN"
12317 #. type: Plain text
12318 #: build/C/man7/uri.7:55
12320 msgid "URI = [ absoluteURI | relativeURI ] [ \"#\" fragment ]\n"
12323 #. type: Plain text
12324 #: build/C/man7/uri.7:57
12326 msgid "absoluteURI = scheme \":\" ( hierarchical_part | opaque_part )\n"
12329 #. type: Plain text
12330 #: build/C/man7/uri.7:59
12332 msgid "relativeURI = ( net_path | absolute_path | relative_path ) [ \"?\" query ]\n"
12335 #. type: Plain text
12336 #: build/C/man7/uri.7:62
12339 "scheme = \"http\" | \"ftp\" | \"gopher\" | \"mailto\" | \"news\" | "
12341 " \"file\" | \"man\" | \"info\" | \"whatis\" | \"ldap\" | \"wais\" | "
12345 #. type: Plain text
12346 #: build/C/man7/uri.7:64
12348 msgid "hierarchical_part = ( net_path | absolute_path ) [ \"?\" query ]\n"
12351 #. type: Plain text
12352 #: build/C/man7/uri.7:66
12354 msgid "net_path = \"//\" authority [ absolute_path ]\n"
12357 #. type: Plain text
12358 #: build/C/man7/uri.7:68
12360 msgid "absolute_path = \"/\" path_segments\n"
12363 #. type: Plain text
12364 #: build/C/man7/uri.7:70
12366 msgid "relative_path = relative_segment [ absolute_path ]\n"
12369 #. type: Plain text
12370 #: build/C/man7/uri.7:82
12372 "A Uniform Resource Identifier (URI) is a short string of characters "
12373 "identifying an abstract or physical resource (for example, a web page). A "
12374 "Uniform Resource Locator (URL) is a URI that identifies a resource through "
12375 "its primary access mechanism (e.g., its network \"location\"), rather than "
12376 "by name or some other attribute of that resource. A Uniform Resource Name "
12377 "(URN) is a URI that must remain globally unique and persistent even when the "
12378 "resource ceases to exist or becomes unavailable."
12381 #. type: Plain text
12382 #: build/C/man7/uri.7:89
12384 "URIs are the standard way to name hypertext link destinations for tools such "
12385 "as web browsers. The string \"http://www.kernelnotes.org\" is a URL (and "
12386 "thus it is also a URI). Many people use the term URL loosely as a synonym "
12387 "for URI (though technically URLs are a subset of URIs)."
12390 #. type: Plain text
12391 #: build/C/man7/uri.7:105
12393 "URIs can be absolute or relative. An absolute identifier refers to a "
12394 "resource independent of context, while a relative identifier refers to a "
12395 "resource by describing the difference from the current context. Within a "
12396 "relative path reference, the complete path segments \".\" and \"..\" have "
12397 "special meanings: \"the current hierarchy level\" and \"the level above this "
12398 "hierarchy level\", respectively, just like they do in UNIX-like systems. A "
12399 "path segment which contains a colon character can't be used as the first "
12400 "segment of a relative URI path (e.g., \"this:that\"), because it would be "
12401 "mistaken for a scheme name; precede such segments with ./ (e.g., "
12402 "\"./this:that\"). Note that descendants of MS-DOS (e.g., Microsoft Windows) "
12403 "replace devicename colons with the vertical bar (\"|\") in URIs, so \"C:\" "
12407 #. type: Plain text
12408 #: build/C/man7/uri.7:109
12410 "A fragment identifier, if included, refers to a particular named portion "
12411 "(fragment) of a resource; text after a \\(aq#\\(aq identifies the fragment. "
12412 "A URI beginning with \\(aq#\\(aq refers to that fragment in the current "
12416 #. type: Plain text
12417 #: build/C/man7/uri.7:117
12419 "There are many different URI schemes, each with specific additional rules "
12420 "and meanings, but they are intentionally made to be as similar as possible. "
12421 "For example, many URL schemes permit the authority to be the following "
12422 "format, called here an I<ip_server> (square brackets show what's optional):"
12425 #. type: Plain text
12426 #: build/C/man7/uri.7:119
12427 msgid "I<ip_server = >[I<user> [ : I<password> ] @ ] I<host> [ : I<port>]"
12430 #. type: Plain text
12431 #: build/C/man7/uri.7:135
12433 "This format allows you to optionally insert a username, a user plus "
12434 "password, and/or a port number. The I<host> is the name of the host "
12435 "computer, either its name as determined by DNS or an IP address (numbers "
12436 "separated by periods). Thus the URI "
12437 "E<lt>http://fred:fredpassword@xyz.com:8080/E<gt> logs into a web server on "
12438 "host xyz.com as fred (using fredpassword) using port 8080. Avoid including "
12439 "a password in a URI if possible because of the many security risks of having "
12440 "a password written down. If the URL supplies a username but no password, "
12441 "and the remote server requests a password, the program interpreting the URL "
12442 "should request one from the user."
12445 #. type: Plain text
12446 #: build/C/man7/uri.7:140
12448 "Here are some of the most common schemes in use on UNIX-like systems that "
12449 "are understood by many tools. Note that many tools using URIs also have "
12450 "internal schemes or specialized schemes; see those tools' documentation for "
12451 "information on those schemes."
12454 #. type: Plain text
12455 #: build/C/man7/uri.7:142
12456 msgid "B<http - Web (HTTP) server>"
12459 #. type: Plain text
12460 #: build/C/man7/uri.7:144
12461 msgid "http://I<ip_server>/I<path>"
12464 #. type: Plain text
12465 #: build/C/man7/uri.7:146
12466 msgid "http://I<ip_server>/I<path>?I<query>"
12469 #. type: Plain text
12470 #: build/C/man7/uri.7:154
12472 "This is a URL accessing a web (HTTP) server. The default port is 80. If "
12473 "the path refers to a directory, the web server will choose what to return; "
12474 "usually if there is a file named \"index.html\" or \"index.htm\" its content "
12475 "is returned, otherwise, a list of the files in the current directory (with "
12476 "appropriate links) is generated and returned. An example is "
12477 "E<lt>http://lwn.netE<gt>."
12480 #. type: Plain text
12481 #: build/C/man7/uri.7:177
12483 "A query can be given in the archaic \"isindex\" format, consisting of a word "
12484 "or phrase and not including an equal sign (=). A query can also be in the "
12485 "longer \"GET\" format, which has one or more query entries of the form "
12486 "I<key>=I<value> separated by the ampersand character (&). Note that I<key> "
12487 "can be repeated more than once, though it's up to the web server and its "
12488 "application programs to determine if there's any meaning to that. There is "
12489 "an unfortunate interaction with HTML/XML/SGML and the GET query format; when "
12490 "such URIs with more than one key are embedded in SGML/XML documents "
12491 "(including HTML), the ampersand (&) has to be rewritten as &. Note that "
12492 "not all queries use this format; larger forms may be too long to store as a "
12493 "URI, so they use a different interaction mechanism (called POST) which does "
12494 "not include the data in the URI. See the Common Gateway Interface "
12495 "specification at E<.UR http://www.w3.org\\:/CGI> E<.UE> for more "
12499 #. type: Plain text
12500 #: build/C/man7/uri.7:179
12501 msgid "B<ftp - File Transfer Protocol (FTP)>"
12504 #. type: Plain text
12505 #: build/C/man7/uri.7:181
12506 msgid "ftp://I<ip_server>/I<path>"
12509 #. type: Plain text
12510 #: build/C/man7/uri.7:189
12512 "This is a URL accessing a file through the file transfer protocol (FTP). "
12513 "The default port (for control) is 21. If no username is included, the "
12514 "username \"anonymous\" is supplied, and in that case many clients provide as "
12515 "the password the requestor's Internet email address. An example is "
12516 "E<lt>ftp://ftp.is.co.za/rfc/rfc1808.txtE<gt>."
12519 #. type: Plain text
12520 #: build/C/man7/uri.7:191
12521 msgid "B<gopher - Gopher server>"
12524 #. type: Plain text
12525 #: build/C/man7/uri.7:193
12526 msgid "gopher://I<ip_server>/I<gophertype selector>"
12529 #. type: Plain text
12530 #: build/C/man7/uri.7:195
12531 msgid "gopher://I<ip_server>/I<gophertype selector>%09I<search>"
12534 #. type: Plain text
12535 #: build/C/man7/uri.7:197
12536 msgid "gopher://I<ip_server>/I<gophertype selector>%09I<search>%09I<gopher+_string>"
12539 #. type: Plain text
12540 #: build/C/man7/uri.7:207
12542 "The default gopher port is 70. I<gophertype> is a single-character field to "
12543 "denote the Gopher type of the resource to which the URL refers. The entire "
12544 "path may also be empty, in which case the delimiting \"/\" is also optional "
12545 "and the gophertype defaults to \"1\"."
12548 #. type: Plain text
12549 #: build/C/man7/uri.7:214
12551 "I<selector> is the Gopher selector string. In the Gopher protocol, Gopher "
12552 "selector strings are a sequence of octets which may contain any octets "
12553 "except 09 hexadecimal (US-ASCII HT or tab), 0A hexadecimal (US-ASCII "
12554 "character LF), and 0D (US-ASCII character CR)."
12557 #. type: Plain text
12558 #: build/C/man7/uri.7:216
12559 msgid "B<mailto - Email address>"
12562 #. type: Plain text
12563 #: build/C/man7/uri.7:218
12564 msgid "mailto:I<email-address>"
12567 #. type: Plain text
12568 #: build/C/man7/uri.7:226
12570 "This is an email address, usually of the form I<name>@I<hostname>. See "
12571 "B<mailaddr>(7) for more information on the correct format of an email "
12572 "address. Note that any % character must be rewritten as %25. An example is "
12573 "E<lt>mailto:dwheeler@dwheeler.comE<gt>."
12576 #. type: Plain text
12577 #: build/C/man7/uri.7:228
12578 msgid "B<news - Newsgroup or News message>"
12581 #. type: Plain text
12582 #: build/C/man7/uri.7:230
12583 msgid "news:I<newsgroup-name>"
12586 #. type: Plain text
12587 #: build/C/man7/uri.7:232
12588 msgid "news:I<message-id>"
12591 #. type: Plain text
12592 #: build/C/man7/uri.7:240
12594 "A I<newsgroup-name> is a period-delimited hierarchical name, such as "
12595 "\"comp.infosystems.www.misc\". If E<lt>newsgroup-nameE<gt> is \"*\" (as in "
12596 "E<lt>news:*E<gt>), it is used to refer to \"all available news groups\". An "
12597 "example is E<lt>news:comp.lang.adaE<gt>."
12600 #. type: Plain text
12601 #: build/C/man7/uri.7:252
12603 "A I<message-id> corresponds to the Message-ID of E<.UR "
12604 "http://www.ietf.org\\:/rfc\\:/rfc1036.txt> IETF RFC\\ 1036, E<.UE> without "
12605 "the enclosing \"E<lt>\" and \"E<gt>\"; it takes the form "
12606 "I<unique>@I<full_domain_name>. A message identifier may be distinguished "
12607 "from a news group name by the presence of the \"@\" character."
12610 #. type: Plain text
12611 #: build/C/man7/uri.7:254
12612 msgid "B<telnet - Telnet login>"
12615 #. type: Plain text
12616 #: build/C/man7/uri.7:256
12617 msgid "telnet://I<ip_server>/"
12620 #. type: Plain text
12621 #: build/C/man7/uri.7:262
12623 "The Telnet URL scheme is used to designate interactive text services that "
12624 "may be accessed by the Telnet protocol. The final \"/\" character may be "
12625 "omitted. The default port is 23. An example is "
12626 "E<lt>telnet://melvyl.ucop.edu/E<gt>."
12629 #. type: Plain text
12630 #: build/C/man7/uri.7:264
12631 msgid "B<file - Normal file>"
12634 #. type: Plain text
12635 #: build/C/man7/uri.7:266
12636 msgid "file://I<ip_server>/I<path_segments>"
12639 #. type: Plain text
12640 #: build/C/man7/uri.7:268
12641 msgid "file:I<path_segments>"
12644 #. type: Plain text
12645 #: build/C/man7/uri.7:285
12647 "This represents a file or directory accessible locally. As a special case, "
12648 "I<ip_server> can be the string \"localhost\" or the empty string; this is "
12649 "interpreted as \"the machine from which the URL is being interpreted\". If "
12650 "the path is to a directory, the viewer should display the directory's "
12651 "contents with links to each containee; not all viewers currently do this. "
12652 "KDE supports generated files through the URL E<lt>file:/cgi-binE<gt>. If "
12653 "the given file isn't found, browser writers may want to try to expand the "
12654 "filename via filename globbing (see B<glob>(7) and B<glob>(3))."
12657 #. type: Plain text
12658 #: build/C/man7/uri.7:299
12660 "The second format (e.g., E<lt>file:/etc/passwdE<gt>) is a correct format "
12661 "for referring to a local file. However, older standards did not permit this "
12662 "format, and some programs don't recognize this as a URI. A more portable "
12663 "syntax is to use an empty string as the server name, for example, "
12664 "E<lt>file:///etc/passwdE<gt>; this form does the same thing and is easily "
12665 "recognized by pattern matchers and older programs as a URI. Note that if "
12666 "you really mean to say \"start from the current location,\" don't specify "
12667 "the scheme at all; use a relative address like E<lt>../test.txtE<gt>, which "
12668 "has the side-effect of being scheme-independent. An example of this scheme "
12669 "is E<lt>file:///etc/passwdE<gt>."
12672 #. type: Plain text
12673 #: build/C/man7/uri.7:301
12674 msgid "B<man - Man page documentation>"
12677 #. type: Plain text
12678 #: build/C/man7/uri.7:303
12679 msgid "man:I<command-name>"
12682 #. type: Plain text
12683 #: build/C/man7/uri.7:305
12684 msgid "man:I<command-name>(I<section>)"
12687 #. type: Plain text
12688 #: build/C/man7/uri.7:314
12690 "This refers to local online manual (man) reference pages. The command name "
12691 "can optionally be followed by a parenthesis and section number; see "
12692 "B<man>(7) for more information on the meaning of the section numbers. This "
12693 "URI scheme is unique to UNIX-like systems (such as Linux) and is not "
12694 "currently registered by the IETF. An example is E<lt>man:ls(1)E<gt>."
12697 #. type: Plain text
12698 #: build/C/man7/uri.7:316
12699 msgid "B<info - Info page documentation>"
12702 #. type: Plain text
12703 #: build/C/man7/uri.7:318
12704 msgid "info:I<virtual-filename>"
12707 #. type: Plain text
12708 #: build/C/man7/uri.7:320
12709 msgid "info:I<virtual-filename>#I<nodename>"
12712 #. type: Plain text
12713 #: build/C/man7/uri.7:322
12714 msgid "info:(I<virtual-filename>)"
12717 #. type: Plain text
12718 #: build/C/man7/uri.7:324
12719 msgid "info:(I<virtual-filename>)I<nodename>"
12722 #. type: Plain text
12723 #: build/C/man7/uri.7:343
12725 "This scheme refers to online info reference pages (generated from texinfo "
12726 "files), a documentation format used by programs such as the GNU tools. This "
12727 "URI scheme is unique to UNIX-like systems (such as Linux) and is not "
12728 "currently registered by the IETF. As of this writing, GNOME and KDE differ "
12729 "in their URI syntax and do not accept the other's syntax. The first two "
12730 "formats are the GNOME format; in nodenames all spaces are written as "
12731 "underscores. The second two formats are the KDE format; spaces in nodenames "
12732 "must be written as spaces, even though this is forbidden by the URI "
12733 "standards. It's hoped that in the future most tools will understand all of "
12734 "these formats and will always accept underscores for spaces in nodenames. "
12735 "In both GNOME and KDE, if the form without the nodename is used the nodename "
12736 "is assumed to be \"Top\". Examples of the GNOME format are "
12737 "E<lt>info:gccE<gt> and E<lt>info:gcc#G++_and_GCCE<gt>. Examples of the KDE "
12738 "format are E<lt>info:(gcc)E<gt> and E<lt>info:(gcc)G++ and GCCE<gt>."
12741 #. type: Plain text
12742 #: build/C/man7/uri.7:345
12743 msgid "B<whatis - Documentation search>"
12746 #. type: Plain text
12747 #: build/C/man7/uri.7:347
12748 msgid "whatis:I<string>"
12751 #. type: Plain text
12752 #: build/C/man7/uri.7:355
12754 "This scheme searches the database of short (one-line) descriptions of "
12755 "commands and returns a list of descriptions containing that string. Only "
12756 "complete word matches are returned. See B<whatis>(1). This URI scheme is "
12757 "unique to UNIX-like systems (such as Linux) and is not currently registered "
12761 #. type: Plain text
12762 #: build/C/man7/uri.7:357
12763 msgid "B<ghelp - GNOME help documentation>"
12766 #. type: Plain text
12767 #: build/C/man7/uri.7:359
12768 msgid "ghelp:I<name-of-application>"
12771 #. type: Plain text
12772 #: build/C/man7/uri.7:362
12774 "This loads GNOME help for the given application. Note that not much "
12775 "documentation currently exists in this format."
12778 #. type: Plain text
12779 #: build/C/man7/uri.7:364
12780 msgid "B<ldap - Lightweight Directory Access Protocol>"
12783 #. type: Plain text
12784 #: build/C/man7/uri.7:366
12785 msgid "ldap://I<hostport>"
12788 #. type: Plain text
12789 #: build/C/man7/uri.7:368
12790 msgid "ldap://I<hostport>/"
12793 #. type: Plain text
12794 #: build/C/man7/uri.7:370
12795 msgid "ldap://I<hostport>/I<dn>"
12798 #. type: Plain text
12799 #: build/C/man7/uri.7:372
12800 msgid "ldap://I<hostport>/I<dn>?I<attributes>"
12803 #. type: Plain text
12804 #: build/C/man7/uri.7:374
12805 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>"
12808 #. type: Plain text
12809 #: build/C/man7/uri.7:376
12810 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>?I<filter>"
12813 #. type: Plain text
12814 #: build/C/man7/uri.7:378
12815 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>?I<filter>?I<extensions>"
12818 #. type: Plain text
12819 #: build/C/man7/uri.7:389
12821 "This scheme supports queries to the Lightweight Directory Access Protocol "
12822 "(LDAP), a protocol for querying a set of servers for hierarchically "
12823 "organized information (such as people and computing resources). See E<.UR "
12824 "http://www.ietf.org\\:/rfc\\:/rfc2255.txt> RFC\\ 2255 E<.UE> for more "
12825 "information on the LDAP URL scheme. The components of this URL are:"
12829 #: build/C/man7/uri.7:389
12834 #. type: Plain text
12835 #: build/C/man7/uri.7:394
12837 "the LDAP server to query, written as a hostname optionally followed by a "
12838 "colon and the port number. The default LDAP port is TCP port 389. If "
12839 "empty, the client determines which the LDAP server to use."
12843 #: build/C/man7/uri.7:394
12848 #. type: Plain text
12849 #: build/C/man7/uri.7:401
12851 "the LDAP Distinguished Name, which identifies the base object of the LDAP "
12852 "search (see E<.UR http://www.ietf.org\\:/rfc\\:/rfc2253.txt> RFC\\ 2253 "
12853 "E<.UE> section 3)."
12857 #: build/C/man7/uri.7:401
12862 #. type: Plain text
12863 #: build/C/man7/uri.7:405
12865 "a comma-separated list of attributes to be returned; see RFC\\ 2251 section "
12866 "4.1.5. If omitted, all attributes should be returned."
12870 #: build/C/man7/uri.7:405
12875 #. type: Plain text
12876 #: build/C/man7/uri.7:410
12878 "specifies the scope of the search, which can be one of \"base\" (for a base "
12879 "object search), \"one\" (for a one-level search), or \"sub\" (for a subtree "
12880 "search). If scope is omitted, \"base\" is assumed."
12884 #: build/C/man7/uri.7:410
12889 #. type: Plain text
12890 #: build/C/man7/uri.7:419
12892 "specifies the search filter (subset of entries to return). If omitted, all "
12893 "entries should be returned. See E<.UR "
12894 "http://www.ietf.org\\:/rfc\\:/rfc2254.txt> RFC\\ 2254 E<.UE> section 4."
12898 #: build/C/man7/uri.7:419
12903 #. type: Plain text
12904 #: build/C/man7/uri.7:425
12906 "a comma-separated list of type=value pairs, where the =value portion may be "
12907 "omitted for options not requiring it. An extension prefixed with a "
12908 "\\(aq!\\(aq is critical (must be supported to be valid), otherwise it is "
12909 "noncritical (optional)."
12912 #. type: Plain text
12913 #: build/C/man7/uri.7:429
12915 "LDAP queries are easiest to explain by example. Here's a query that asks "
12916 "ldap.itd.umich.edu for information about the University of Michigan in the "
12920 #. type: Plain text
12921 #: build/C/man7/uri.7:432
12923 msgid "ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US\n"
12926 #. type: Plain text
12927 #: build/C/man7/uri.7:435
12928 msgid "To just get its postal address attribute, request:"
12931 #. type: Plain text
12932 #: build/C/man7/uri.7:438
12934 msgid "ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US?postalAddress\n"
12937 #. type: Plain text
12938 #: build/C/man7/uri.7:442
12940 "To ask a host.com at port 6666 for information about the person with common "
12941 "name (cn) \"Babs Jensen\" at University of Michigan, request:"
12944 #. type: Plain text
12945 #: build/C/man7/uri.7:445
12947 msgid "ldap://host.com:6666/o=University%20of%20Michigan,c=US??sub?(cn=Babs%20Jensen)\n"
12950 #. type: Plain text
12951 #: build/C/man7/uri.7:448
12952 msgid "B<wais - Wide Area Information Servers>"
12955 #. type: Plain text
12956 #: build/C/man7/uri.7:450
12957 msgid "wais://I<hostport>/I<database>"
12960 #. type: Plain text
12961 #: build/C/man7/uri.7:452
12962 msgid "wais://I<hostport>/I<database>?I<search>"
12965 #. type: Plain text
12966 #: build/C/man7/uri.7:454
12967 msgid "wais://I<hostport>/I<database>/I<wtype>/I<wpath>"
12970 #. type: Plain text
12971 #: build/C/man7/uri.7:463
12973 "This scheme designates a WAIS database, search, or document (see E<.UR "
12974 "http://www.ietf.org\\:/rfc\\:/rfc1625.txt> IETF RFC\\ 1625 E<.UE> for more "
12975 "information on WAIS). Hostport is the hostname, optionally followed by a "
12976 "colon and port number (the default port number is 210)."
12979 #. type: Plain text
12980 #: build/C/man7/uri.7:473
12982 "The first form designates a WAIS database for searching. The second form "
12983 "designates a particular search of the WAIS database I<database>. The third "
12984 "form designates a particular document within a WAIS database to be "
12985 "retrieved. I<wtype> is the WAIS designation of the type of the object and "
12986 "I<wpath> is the WAIS document-id."
12989 #. type: Plain text
12990 #: build/C/man7/uri.7:475
12991 msgid "B<other schemes>"
12994 #. type: Plain text
12995 #: build/C/man7/uri.7:489
12997 "There are many other URI schemes. Most tools that accept URIs support a set "
12998 "of internal URIs (e.g., Mozilla has the about: scheme for internal "
12999 "information, and the GNOME help browser has the toc: scheme for various "
13000 "starting locations). There are many schemes that have been defined but are "
13001 "not as widely used at the current time (e.g., prospero). The nntp: scheme "
13002 "is deprecated in favor of the news: scheme. URNs are to be supported by the "
13003 "urn: scheme, with a hierarchical name space (e.g., urn:ietf:... would "
13004 "identify IETF documents); at this time URNs are not widely implemented. Not "
13005 "all tools support all schemes."
13009 #: build/C/man7/uri.7:489
13011 msgid "Character encoding"
13014 #. type: Plain text
13015 #: build/C/man7/uri.7:493
13017 "URIs use a limited number of characters so that they can be typed in and "
13018 "used in a variety of situations."
13021 #. type: Plain text
13022 #: build/C/man7/uri.7:497
13024 "The following characters are reserved, that is, they may appear in a URI but "
13025 "their use is limited to their reserved purpose (conflicting data must be "
13026 "escaped before forming the URI):"
13029 #. type: Plain text
13030 #: build/C/man7/uri.7:499
13032 msgid " ; / ? : @ & = + $ ,\n"
13035 #. type: Plain text
13036 #: build/C/man7/uri.7:505
13038 "Unreserved characters may be included in a URI. Unreserved characters "
13039 "include uppercase and lowercase English letters, decimal digits, and the "
13040 "following limited set of punctuation marks and symbols:"
13043 #. type: Plain text
13044 #: build/C/man7/uri.7:507
13046 msgid " - _ . ! ~ * ' ( )\n"
13049 #. type: Plain text
13050 #: build/C/man7/uri.7:522
13052 "All other characters must be escaped. An escaped octet is encoded as a "
13053 "character triplet, consisting of the percent character \"%\" followed by the "
13054 "two hexadecimal digits representing the octet code (you can use uppercase or "
13055 "lowercase letters for the hexadecimal digits). For example, a blank space "
13056 "must be escaped as \"%20\", a tab character as \"%09\", and the \"&\" as "
13057 "\"%26\". Because the percent \"%\" character always has the reserved "
13058 "purpose of being the escape indicator, it must be escaped as \"%25\". It is "
13059 "common practice to escape space characters as the plus symbol (+) in query "
13060 "text; this practice isn't uniformly defined in the relevant RFCs (which "
13061 "recommend %20 instead) but any tool accepting URIs with query text should be "
13062 "prepared for them. A URI is always shown in its \"escaped\" form."
13065 #. type: Plain text
13066 #: build/C/man7/uri.7:528
13068 "Unreserved characters can be escaped without changing the semantics of the "
13069 "URI, but this should not be done unless the URI is being used in a context "
13070 "that does not allow the unescaped character to appear. For example, \"%7e\" "
13071 "is sometimes used instead of \"~\" in an HTTP URL path, but the two are "
13072 "equivalent for an HTTP URL."
13075 #. type: Plain text
13076 #: build/C/man7/uri.7:532
13078 "For URIs which must handle characters outside the US ASCII character set, "
13079 "the HTML 4.01 specification (section B.2) and IETF RFC\\ 2718 (section "
13080 "2.2.5) recommend the following approach:"
13083 #. type: Plain text
13084 #: build/C/man7/uri.7:536
13086 "translate the character sequences into UTF-8 (IETF RFC\\ 2279)\\(emsee "
13087 "B<utf-8>(7)\\(emand then"
13090 #. type: Plain text
13091 #: build/C/man7/uri.7:539
13093 "use the URI escaping mechanism, that is, use the %HH encoding for unsafe "
13098 #: build/C/man7/uri.7:539
13100 msgid "Writing a URI"
13103 #. type: Plain text
13104 #: build/C/man7/uri.7:562
13106 "When written, URIs should be placed inside double quotes (e.g., "
13107 "\"http://www.kernelnotes.org\"), enclosed in angle brackets (e.g., "
13108 "E<lt>http://lwn.netE<gt>), or placed on a line by themselves. A warning for "
13109 "those who use double-quotes: B<never> move extraneous punctuation (such as "
13110 "the period ending a sentence or the comma in a list) inside a URI, since "
13111 "this will change the value of the URI. Instead, use angle brackets instead, "
13112 "or switch to a quoting system that never includes extraneous characters "
13113 "inside quotation marks. This latter system, called the 'new' or 'logical' "
13114 "quoting system by \"Hart's Rules\" and the \"Oxford Dictionary for Writers "
13115 "and Editors\", is preferred practice in Great Britain and hackers worldwide "
13116 "(see the Jargon File's section on Hacker Writing Style, E<.UR "
13117 "http://www.fwi.uva.nl\\:/~mes\\:/jargon\\:/h\\:/HackerWritingStyle.html> "
13118 "E<.UE ,> for more information). Older documents suggested inserting the "
13119 "prefix \"URL:\" just before the URI, but this form has never caught on."
13122 #. type: Plain text
13123 #: build/C/man7/uri.7:584
13125 "The URI syntax was designed to be unambiguous. However, as URIs have become "
13126 "commonplace, traditional media (television, radio, newspapers, billboards, "
13127 "etc.) have increasingly used abbreviated URI references consisting of only "
13128 "the authority and path portions of the identified resource (e.g., "
13129 "E<lt>www.w3.org/AddressingE<gt>). Such references are primarily intended "
13130 "for human interpretation rather than machine, with the assumption that "
13131 "context-based heuristics are sufficient to complete the URI (e.g., hostnames "
13132 "beginning with \"www\" are likely to have a URI prefix of \"http://\" and "
13133 "hostnames beginning with \"ftp\" likely to have a prefix of \"ftp://\"). "
13134 "Many client implementations heuristically resolve these references. Such "
13135 "heuristics may change over time, particularly when new schemes are "
13136 "introduced. Since an abbreviated URI has the same syntax as a relative URL "
13137 "path, abbreviated URI references cannot be used where relative URIs are "
13138 "permitted, and can be used only when there is no defined base (such as in "
13139 "dialog boxes). Don't use abbreviated URIs as hypertext links inside a "
13140 "document; use the standard format as described here."
13143 #. type: Plain text
13144 #: build/C/man7/uri.7:592
13146 "E<.UR http://www.ietf.org\\:/rfc\\:/rfc2396.txt> (IETF RFC\\ 2396) E<.UE ,> "
13147 "E<.UR http://www.w3.org\\:/TR\\:/REC-html40> (HTML 4.0) E<.UE .>"
13150 #. type: Plain text
13151 #: build/C/man7/uri.7:598
13153 "Any tool accepting URIs (e.g., a web browser) on a Linux system should be "
13154 "able to handle (directly or indirectly) all of the schemes described here, "
13155 "including the man: and info: schemes. Handling them by invoking some other "
13156 "program is fine and in fact encouraged."
13159 #. type: Plain text
13160 #: build/C/man7/uri.7:600
13161 msgid "Technically the fragment isn't part of the URI."
13164 #. type: Plain text
13165 #: build/C/man7/uri.7:609
13167 "For information on how to embed URIs (including URLs) in a data format, see "
13168 "documentation on that format. HTML uses the format E<lt>A "
13169 "HREF=\"I<uri>\"E<gt> I<text> E<lt>/AE<gt>. Texinfo files use the format "
13170 "@uref{I<uri>}. Man and mdoc have the recently added UR macro, or just "
13171 "include the URI in the text (viewers should be able to detect :// as part of "
13175 #. type: Plain text
13176 #: build/C/man7/uri.7:630
13178 "The GNOME and KDE desktop environments currently vary in the URIs they "
13179 "accept, in particular in their respective help browsers. To list man pages, "
13180 "GNOME uses E<lt>toc:manE<gt> while KDE uses E<lt>man:(index)E<gt>, and to "
13181 "list info pages, GNOME uses E<lt>toc:infoE<gt> while KDE uses "
13182 "E<lt>info:(dir)E<gt> (the author of this man page prefers the KDE approach "
13183 "here, though a more regular format would be even better). In general, KDE "
13184 "uses E<lt>file:/cgi-bin/E<gt> as a prefix to a set of generated files. KDE "
13185 "prefers documentation in HTML, accessed via the "
13186 "E<lt>file:/cgi-bin/helpindexE<gt>. GNOME prefers the ghelp scheme to store "
13187 "and find documentation. Neither browser handles file: references to "
13188 "directories at the time of this writing, making it difficult to refer to an "
13189 "entire directory with a browsable URI. As noted above, these environments "
13190 "differ in how they handle the info: scheme, probably the most important "
13191 "variation. It is expected that GNOME and KDE will converge to common URI "
13192 "formats, and a future version of this man page will describe the converged "
13193 "result. Efforts to aid this convergence are encouraged."
13197 #: build/C/man7/uri.7:630
13202 #. type: Plain text
13203 #: build/C/man7/uri.7:640
13205 "A URI does not in itself pose a security threat. There is no general "
13206 "guarantee that a URL, which at one time located a given resource, will "
13207 "continue to do so. Nor is there any guarantee that a URL will not locate a "
13208 "different resource at some later point in time; such a guarantee can be "
13209 "obtained only from the person(s) controlling that namespace and the resource "
13213 #. type: Plain text
13214 #: build/C/man7/uri.7:655
13216 "It is sometimes possible to construct a URL such that an attempt to perform "
13217 "a seemingly harmless operation, such as the retrieval of an entity "
13218 "associated with the resource, will in fact cause a possibly damaging remote "
13219 "operation to occur. The unsafe URL is typically constructed by specifying a "
13220 "port number other than that reserved for the network protocol in question. "
13221 "The client unwittingly contacts a site that is in fact running a different "
13222 "protocol. The content of the URL contains instructions that, when "
13223 "interpreted according to this other protocol, cause an unexpected "
13224 "operation. An example has been the use of a gopher URL to cause an "
13225 "unintended or impersonating message to be sent via a SMTP server."
13228 #. type: Plain text
13229 #: build/C/man7/uri.7:659
13231 "Caution should be used when using any URL that specifies a port number other "
13232 "than the default for the protocol, especially when it is a number within the "
13236 #. type: Plain text
13237 #: build/C/man7/uri.7:667
13239 "Care should be taken when a URI contains escaped delimiters for a given "
13240 "protocol (for example, CR and LF characters for telnet protocols) that these "
13241 "are not unescaped before transmission. This might violate the protocol, but "
13242 "avoids the potential for such characters to be used to simulate an extra "
13243 "operation or parameter in that protocol, which might lead to an unexpected "
13244 "and possibly harmful remote operation to be performed."
13247 #. type: Plain text
13248 #: build/C/man7/uri.7:673
13250 "It is clearly unwise to use a URI that contains a password which is intended "
13251 "to be secret. In particular, the use of a password within the \"userinfo\" "
13252 "component of a URI is strongly recommended against except in those rare "
13253 "cases where the \"password\" parameter is intended to be public."
13256 #. type: Plain text
13257 #: build/C/man7/uri.7:695
13259 "Documentation may be placed in a variety of locations, so there currently "
13260 "isn't a good URI scheme for general online documentation in arbitrary "
13261 "formats. References of the form E<lt>file:///usr/doc/ZZZE<gt> don't work "
13262 "because different distributions and local installation requirements may "
13263 "place the files in different directories (it may be in /usr/doc, or "
13264 "/usr/local/doc, or /usr/share, or somewhere else). Also, the directory ZZZ "
13265 "usually changes when a version changes (though filename globbing could "
13266 "partially overcome this). Finally, using the file: scheme doesn't easily "
13267 "support people who dynamically load documentation from the Internet (instead "
13268 "of loading the files onto a local filesystem). A future URI scheme may be "
13269 "added (e.g., \"userdoc:\") to permit programs to include cross-references to "
13270 "more detailed documentation without having to know the exact location of "
13271 "that documentation. Alternatively, a future version of the filesystem "
13272 "specification may specify file locations sufficiently so that the file: "
13273 "scheme will be able to locate documentation."
13276 #. type: Plain text
13277 #: build/C/man7/uri.7:698
13279 "Many programs and file formats don't include a way to incorporate or "
13280 "implement links using URIs."
13284 #. David A. Wheeler (dwheeler@dwheeler.com) wrote this man page.
13285 #. type: Plain text
13286 #: build/C/man7/uri.7:706
13288 "Many programs can't handle all of these different URI formats; there should "
13289 "be a standard mechanism to load an arbitrary URI that automatically detects "
13290 "the users' environment (e.g., text or graphics, desktop environment, local "
13291 "user preferences, and currently executing tools) and invokes the right tool "
13295 #. type: Plain text
13296 #: build/C/man7/uri.7:711
13297 msgid "B<lynx>(1), B<man2html>(1), B<mailaddr>(7), B<utf-8>(7)"
13300 #. type: Plain text
13301 #: build/C/man7/uri.7:715
13302 msgid "E<.UR http://www.ietf.org\\:/rfc\\:/rfc2255.txt> IETF RFC\\ 2255 E<.UE>"
13306 #: build/C/man4/vcs.4:29
13312 #: build/C/man4/vcs.4:29
13317 #. type: Plain text
13318 #: build/C/man4/vcs.4:32
13319 msgid "vcs, vcsa - virtual console memory"
13322 #. type: Plain text
13323 #: build/C/man4/vcs.4:38
13325 "I</dev/vcs0> is a character device with major number 7 and minor number 0, "
13326 "usually of mode 0644 and owner root.tty. It refers to the memory of the "
13327 "currently displayed virtual console terminal."
13330 #. type: Plain text
13331 #: build/C/man4/vcs.4:58
13333 "I</dev/vcs[1-63]> are character devices for virtual console terminals, they "
13334 "have major number 7 and minor number 1 to 63, usually mode 0644 and owner "
13335 "root.tty. I</dev/vcsa[0-63]> are the same, but using I<unsigned short>s (in "
13336 "host byte order) that include attributes, and prefixed with four bytes "
13337 "giving the screen dimensions and cursor position: I<lines>, I<columns>, "
13338 "I<x>, I<y>. (I<x> = I<y> = 0 at the top left corner of the screen.)"
13341 #. type: Plain text
13342 #: build/C/man4/vcs.4:72
13344 "When a 512-character font is loaded, the 9th bit position can be fetched by "
13345 "applying the B<ioctl>(2) B<VT_GETHIFONTMASK> operation (available in Linux "
13346 "kernels 2.6.18 and above) on I</dev/tty[1-63]>; the value is returned in "
13347 "the I<unsigned short> pointed to by the third B<ioctl>(2) argument."
13350 #. type: Plain text
13351 #: build/C/man4/vcs.4:79
13353 "These devices replace the screendump B<ioctl>(2) operations of "
13354 "B<console>(4), so the system administrator can control access using "
13355 "filesystem permissions."
13358 #. type: Plain text
13359 #: build/C/man4/vcs.4:81
13360 msgid "The devices for the first eight virtual consoles may be created by:"
13363 #. type: Plain text
13364 #: build/C/man4/vcs.4:88
13367 " for x in 0 1 2 3 4 5 6 7 8; do\n"
13368 " mknod -m 644 /dev/vcs$x c 7 $x;\n"
13369 " mknod -m 644 /dev/vcsa$x c 7 $[$x+128];\n"
13371 " chown root:tty /dev/vcs*\n"
13374 #. type: Plain text
13375 #: build/C/man4/vcs.4:93
13376 msgid "No B<ioctl>(2) requests are supported."
13379 #. type: Plain text
13380 #: build/C/man4/vcs.4:95
13381 msgid "/dev/vcs[0-63]"
13385 #. Andries Brouwer <aeb@cwi.nl>
13386 #. type: Plain text
13387 #: build/C/man4/vcs.4:99
13388 msgid "/dev/vcsa[0-63]"
13391 #. type: Plain text
13392 #: build/C/man4/vcs.4:101
13393 msgid "Introduced with version 1.1.92 of the Linux kernel."
13396 #. type: Plain text
13397 #: build/C/man4/vcs.4:103
13398 msgid "You may do a screendump on vt3 by switching to vt1 and typing"
13401 #. type: Plain text
13402 #: build/C/man4/vcs.4:105
13404 msgid " cat /dev/vcs3 E<gt>foo\n"
13407 #. type: Plain text
13408 #: build/C/man4/vcs.4:109
13410 "Note that the output does not contain newline characters, so some processing "
13411 "may be required, like in"
13414 #. type: Plain text
13415 #: build/C/man4/vcs.4:111
13417 msgid " old -w 81 /dev/vcs3 | lpr\n"
13420 #. type: Plain text
13421 #: build/C/man4/vcs.4:113
13422 msgid "or (horrors)"
13425 #. type: Plain text
13426 #: build/C/man4/vcs.4:115
13428 msgid " xetterm -dump 3 -file /proc/self/fd/1\n"
13431 #. type: Plain text
13432 #: build/C/man4/vcs.4:120
13433 msgid "The I</dev/vcsa0> device is used for Braille support."
13436 #. type: Plain text
13437 #: build/C/man4/vcs.4:124
13439 "This program displays the character and screen attributes under the cursor "
13440 "of the second virtual console, then changes the background color there:"
13443 #. type: Plain text
13444 #: build/C/man4/vcs.4:132
13447 "#include E<lt>unistd.hE<gt>\n"
13448 "#include E<lt>stdlib.hE<gt>\n"
13449 "#include E<lt>stdio.hE<gt>\n"
13450 "#include E<lt>fcntl.hE<gt>\n"
13451 "#include E<lt>sys/ioctl.hE<gt>\n"
13452 "#include E<lt>linux/vt.hE<gt>\n"
13455 #. type: Plain text
13456 #: build/C/man4/vcs.4:143
13463 " char *device = \"/dev/vcsa2\";\n"
13464 " char *console = \"/dev/tty2\";\n"
13465 " struct {unsigned char lines, cols, x, y;} scrn;\n"
13466 " unsigned short s;\n"
13467 " unsigned short mask;\n"
13468 " unsigned char ch, attrib;\n"
13471 #. type: Plain text
13472 #: build/C/man4/vcs.4:172
13475 " fd = open(console, O_RDWR);\n"
13476 " if (fd E<lt> 0) {\n"
13477 " perror(console);\n"
13478 " exit(EXIT_FAILURE);\n"
13480 " if (ioctl(fd, VT_GETHIFONTMASK, &mask) E<lt> 0) {\n"
13481 " perror(\"VT_GETHIFONTMASK\");\n"
13482 " exit(EXIT_FAILURE);\n"
13484 " (void) close(fd);\n"
13485 " fd = open(device, O_RDWR);\n"
13486 " if (fd E<lt> 0) {\n"
13487 " perror(device);\n"
13488 " exit(EXIT_FAILURE);\n"
13490 " (void) read(fd, &scrn, 4);\n"
13491 " (void) lseek(fd, 4 + 2*(scrn.y*scrn.cols + scrn.x), 0);\n"
13492 " (void) read(fd, &s, 2);\n"
13493 " ch = s & 0xff;\n"
13494 " if (attrib & mask)\n"
13496 " attrib = ((s & ~mask) E<gt>E<gt> 8);\n"
13497 " printf(\"ch=\\(aq%c\\(aq attrib=0x%02x\\en\", ch, attrib);\n"
13498 " attrib ^= 0x10;\n"
13499 " (void) lseek(fd, -1, 1);\n"
13500 " (void) write(fd, &attrib, 1);\n"
13501 " exit(EXIT_SUCCESS);\n"
13505 #. type: Plain text
13506 #: build/C/man4/vcs.4:178
13507 msgid "B<console>(4), B<tty>(4), B<ttyS>(4), B<gpm>(8)"
13511 #: build/C/man4/wavelan.4:15
13517 #: build/C/man4/wavelan.4:15
13522 #. type: Plain text
13523 #: build/C/man4/wavelan.4:18
13524 msgid "wavelan - AT&T GIS WaveLAN ISA device driver"
13527 #. type: Plain text
13528 #: build/C/man4/wavelan.4:20
13530 "B<insmod wavelan_cs.o [io=>I<B,B..>B<] [ irq=>I<I,I..>B<] "
13531 "[name=>I<N,N..>B<]>"
13534 #. type: Plain text
13535 #: build/C/man4/wavelan.4:23
13537 "I<This driver is obsolete:> it was removed from the kernel in version "
13541 #. type: Plain text
13542 #: build/C/man4/wavelan.4:39
13544 "I<wavelan> is the low-level device driver for the NCR / AT&T / Lucent "
13545 "B<WaveLAN ISA> and Digital (DEC) B<RoamAbout DS> wireless ethernet "
13546 "adapter. This driver is available as a module or might be compiled in the "
13547 "kernel. This driver supports multiple cards in both forms (up to 4) and "
13548 "allocates the next available ethernet device (eth0..eth#) for each card "
13549 "found, unless a device name is explicitly specified (see below). This "
13550 "device name will be reported in the kernel log file with the MAC address, "
13551 "NWID and frequency used by the card."
13554 #. type: Plain text
13555 #: build/C/man4/wavelan.4:46
13557 "This section apply to the module form (parameters passed on the B<insmod>(8) "
13558 "command line). If the driver is included in the kernel, use the "
13559 "I<ether=IRQ,IO,NAME> syntax on the kernel command line."
13563 #: build/C/man4/wavelan.4:46
13568 #. type: Plain text
13569 #: build/C/man4/wavelan.4:53
13571 "Specify the list of base address where to search for wavelan cards (setting "
13572 "by dip switch on the card). If you don't specify any io address, the driver "
13573 "will scan 0x390 and 0x3E0 addresses, which might conflict with other "
13578 #: build/C/man4/wavelan.4:53
13583 #. type: Plain text
13584 #: build/C/man4/wavelan.4:57
13586 "Set the list of irq that each wavelan card should use (the value is saved in "
13587 "permanent storage for future use)."
13591 #: build/C/man4/wavelan.4:57
13596 #. type: Plain text
13597 #: build/C/man4/wavelan.4:62
13599 "Set the list of name to be used for each wavelan cards device (name used by "
13604 #: build/C/man4/wavelan.4:62
13606 msgid "Wireless extensions"
13609 #. type: Plain text
13610 #: build/C/man4/wavelan.4:66
13611 msgid "Use B<iwconfig>(8) to manipulate wireless extensions."
13615 #: build/C/man4/wavelan.4:66
13617 msgid "NWID (or domain)"
13620 #. type: Plain text
13621 #: build/C/man4/wavelan.4:75
13623 "Set the network ID [I<0> to I<FFFF>] or disable it [I<off>]. As the NWID is "
13624 "stored in the card Permanent Storage Area, it will be reuse at any further "
13625 "invocation of the driver."
13629 #: build/C/man4/wavelan.4:75
13631 msgid "Frequency & channels"
13634 #. type: Plain text
13635 #: build/C/man4/wavelan.4:86
13637 "For the 2.4GHz 2.00 Hardware, you are able to set the frequency by "
13638 "specifying one of the 10 defined channels (I<2.412,> I<2.422, 2.425, 2.4305, "
13639 "2.432, 2.442, 2.452, 2.460, 2.462> or I<2.484>) or directly by its value. "
13640 "The frequency is changed immediately and permanently. Frequency "
13641 "availability depends on the regulations..."
13645 #: build/C/man4/wavelan.4:86
13647 msgid "Statistics spy"
13650 #. type: Plain text
13651 #: build/C/man4/wavelan.4:90
13653 "Set a list of MAC addresses in the driver (up to 8) and get the last quality "
13654 "of link for each of those (see B<iwspy>(8))."
13658 #: build/C/man4/wavelan.4:90
13660 msgid "/proc/net/wireless"
13663 #. type: Plain text
13664 #: build/C/man4/wavelan.4:105
13666 "I<status> is the status reported by the modem. I<Link quality> reports the "
13667 "quality of the modulation on the air (direct sequence spread spectrum) [max "
13668 "= 16]. I<Level> and I<Noise> refer to the signal level and noise level [max "
13669 "= 64]. The I<crypt discarded packet> and I<misc discarded packet> counters "
13670 "are not implemented."
13674 #: build/C/man4/wavelan.4:105
13676 msgid "Private ioctl"
13679 #. type: Plain text
13680 #: build/C/man4/wavelan.4:109
13681 msgid "You may use B<iwpriv>(8) to manipulate private ioctls."
13685 #: build/C/man4/wavelan.4:109
13687 msgid "Quality and level threshold"
13690 #. type: Plain text
13691 #: build/C/man4/wavelan.4:112
13693 "Enable you the define the quality and level threshold used by the modem "
13694 "(packet below that level are discarded)."
13698 #: build/C/man4/wavelan.4:112
13703 #. type: Plain text
13704 #: build/C/man4/wavelan.4:119
13706 "This functionality makes it possible to set a number of signal level "
13707 "intervals and to count the number of packets received in each of those "
13708 "defined intervals. This distribution might be used to calculate the mean "
13709 "value and standard deviation of the signal level."
13713 #: build/C/man4/wavelan.4:119
13715 msgid "Specific notes"
13718 #. type: Plain text
13719 #: build/C/man4/wavelan.4:125
13721 "This driver will fail to detect some B<non-NCR/ATT&T/Lucent> Wavelan cards. "
13722 "If this happens for you, you must look in the source code on how to add your "
13723 "card to the detection routine."
13727 #. Bruce Janson \(em bruce@cs.usyd.edu.au
13729 #. Jean Tourrilhes \(em jt@hplb.hpl.hp.com
13731 #. (and others; see source code for details)
13734 #. type: Plain text
13735 #: build/C/man4/wavelan.4:138
13737 "Some of the mentioned features are optional. You may enable to disable them "
13738 "by changing flags in the driver header and recompile."
13741 #. type: Plain text
13742 #: build/C/man4/wavelan.4:145
13744 "B<wavelan_cs>(4), B<ifconfig>(8), B<insmod>(8), B<iwconfig>(8), "
13745 "B<iwpriv>(8), B<iwspy>(8)"