1 # SOME DESCRIPTIVE TITLE
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "POT-Creation-Date: 2014-06-03 01:29+0900\n"
11 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
12 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
13 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
19 #. Copyright (C) 2011, Hewlett-Packard Development Company, L.P.
20 #. Written by Stephen M. Cameron <scameron@beardog.cce.hp.com>
22 #. %%%LICENSE_START(GPLv2_ONELINE)
23 #. Licensed under GNU General Public License version 2 (GPLv2)
26 #. shorthand for double quote that works everywhere.
28 #: build/C/man4/cciss.4:9 build/C/man4/hpsa.4:9
34 #: build/C/man4/cciss.4:10
40 #: build/C/man4/cciss.4:10 build/C/man4/console_codes.4:23 build/C/man4/dsp56k.4:27 build/C/man4/hpsa.4:10 build/C/man4/sk98lin.4:27
46 #: build/C/man4/cciss.4:10 build/C/man4/console.4:12 build/C/man4/console_codes.4:23 build/C/man4/console_ioctl.4:40 build/C/man5/core.5:25 build/C/man4/cpuid.4:26 build/C/man4/dsp56k.4:27 build/C/man4/fd.4:28 build/C/man7/fifo.7:13 build/C/man4/full.4:26 build/C/man3/gnu_get_libc_version.3:26 build/C/man4/hd.4:29 build/C/man4/hpsa.4:10 build/C/man4/initrd.4:35 build/C/man4/lp.4:27 build/C/man3/makedev.3:26 build/C/man4/mem.4:26 build/C/man2/mknod.2:15 build/C/man4/mouse.4:26 build/C/man4/msr.4:26 build/C/man4/null.4:26 build/C/man7/pipe.7:25 build/C/man4/ram.4:26 build/C/man4/random.4:19 build/C/man4/sd.4:26 build/C/man4/sk98lin.4:27 build/C/man4/st.4:25 build/C/man2/syslog.2:31 build/C/man3/syslog.3:36 build/C/man4/ttyS.4:26 build/C/man7/uri.7:48 build/C/man4/vcs.4:29 build/C/man4/wavelan.4:15
52 #: build/C/man4/cciss.4:10 build/C/man4/console.4:12 build/C/man4/console_codes.4:23 build/C/man4/console_ioctl.4:40 build/C/man5/core.5:25 build/C/man4/cpuid.4:26 build/C/man4/dsp56k.4:27 build/C/man4/fd.4:28 build/C/man7/fifo.7:13 build/C/man4/full.4:26 build/C/man3/gnu_get_libc_version.3:26 build/C/man4/hd.4:29 build/C/man4/hpsa.4:10 build/C/man4/initrd.4:35 build/C/man4/lp.4:27 build/C/man3/makedev.3:26 build/C/man4/mem.4:26 build/C/man3/mkfifo.3:28 build/C/man2/mknod.2:15 build/C/man4/mouse.4:26 build/C/man4/msr.4:26 build/C/man4/null.4:26 build/C/man7/pipe.7:25 build/C/man4/ram.4:26 build/C/man4/random.4:19 build/C/man4/sd.4:26 build/C/man3/setlogmask.3:25 build/C/man4/sk98lin.4:27 build/C/man4/st.4:25 build/C/man3/stdarg.3:43 build/C/man2/syslog.2:31 build/C/man3/syslog.3:36 build/C/man4/ttyS.4:26 build/C/man7/uri.7:48 build/C/man4/vcs.4:29 build/C/man4/wavelan.4:15
54 msgid "Linux Programmer's Manual"
58 #: build/C/man4/cciss.4:11 build/C/man4/console.4:13 build/C/man4/console_codes.4:24 build/C/man4/console_ioctl.4:41 build/C/man5/core.5:26 build/C/man4/cpuid.4:27 build/C/man4/dsp56k.4:28 build/C/man4/fd.4:29 build/C/man7/fifo.7:14 build/C/man4/full.4:27 build/C/man3/gnu_get_libc_version.3:27 build/C/man4/hd.4:30 build/C/man4/hpsa.4:11 build/C/man4/initrd.4:36 build/C/man4/lp.4:28 build/C/man3/makedev.3:27 build/C/man4/mem.4:27 build/C/man3/mkfifo.3:29 build/C/man2/mknod.2:16 build/C/man4/mouse.4:27 build/C/man4/msr.4:27 build/C/man4/null.4:27 build/C/man7/pipe.7:26 build/C/man4/ram.4:27 build/C/man4/random.4:20 build/C/man4/sd.4:27 build/C/man3/setlogmask.3:26 build/C/man4/sk98lin.4:28 build/C/man4/st.4:26 build/C/man3/stdarg.3:44 build/C/man2/syslog.2:32 build/C/man3/syslog.3:37 build/C/man4/ttyS.4:27 build/C/man7/uri.7:49 build/C/man4/vcs.4:30 build/C/man4/wavelan.4:16
64 #: build/C/man4/cciss.4:13
65 msgid "cciss - HP Smart Array block driver"
69 #: build/C/man4/cciss.4:13 build/C/man4/dsp56k.4:30 build/C/man3/gnu_get_libc_version.3:29 build/C/man4/hpsa.4:13 build/C/man4/lp.4:30 build/C/man3/makedev.3:29 build/C/man3/mkfifo.3:31 build/C/man2/mknod.2:18 build/C/man4/random.4:22 build/C/man4/sd.4:29 build/C/man3/setlogmask.3:28 build/C/man4/sk98lin.4:30 build/C/man4/st.4:28 build/C/man3/stdarg.3:46 build/C/man2/syslog.2:35 build/C/man3/syslog.3:39 build/C/man7/uri.7:51 build/C/man4/wavelan.4:18
75 #: build/C/man4/cciss.4:16
77 msgid "modprobe cciss [ cciss_allow_hpsa=1 ]\n"
81 #: build/C/man4/cciss.4:17 build/C/man4/console.4:15 build/C/man4/console_codes.4:26 build/C/man4/console_ioctl.4:43 build/C/man5/core.5:28 build/C/man4/cpuid.4:29 build/C/man4/dsp56k.4:46 build/C/man4/fd.4:132 build/C/man7/fifo.7:16 build/C/man4/full.4:39 build/C/man3/gnu_get_libc_version.3:36 build/C/man4/hd.4:32 build/C/man4/hpsa.4:17 build/C/man4/initrd.4:71 build/C/man4/lp.4:43 build/C/man3/makedev.3:39 build/C/man4/mem.4:29 build/C/man3/mkfifo.3:62 build/C/man2/mknod.2:46 build/C/man4/mouse.4:33 build/C/man4/msr.4:29 build/C/man4/null.4:29 build/C/man7/pipe.7:28 build/C/man4/ram.4:29 build/C/man4/random.4:26 build/C/man4/sd.4:71 build/C/man3/setlogmask.3:34 build/C/man4/sk98lin.4:62 build/C/man4/st.4:37 build/C/man3/stdarg.3:56 build/C/man2/syslog.2:46 build/C/man3/syslog.3:59 build/C/man4/ttyS.4:29 build/C/man7/uri.7:71 build/C/man4/vcs.4:32 build/C/man4/wavelan.4:20
87 #: build/C/man4/cciss.4:20
88 msgid "B<cciss> is a block driver for older HP Smart Array RAID controllers."
92 #: build/C/man4/cciss.4:20 build/C/man4/hpsa.4:20 build/C/man4/initrd.4:180
98 #: build/C/man4/cciss.4:29
100 "I<cciss_allow_hpsa=1>: This option prevents the B<cciss> driver from "
101 "attempting to drive any controllers that the B<hpsa>(4) driver is capable "
102 "of controlling, which is to say, the B<cciss> driver is restricted by this "
103 "option to the following controllers:"
107 #: build/C/man4/cciss.4:48
110 " Smart Array 5300\n"
113 " Smart Array 5312\n"
116 " Smart Array 6400\n"
117 " Smart Array 6400 EM\n"
119 " Smart Array P600\n"
120 " Smart Array P400i\n"
121 " Smart Array E200i\n"
122 " Smart Array E200\n"
123 " Smart Array E200i\n"
124 " Smart Array E200i\n"
125 " Smart Array E200i\n"
126 " Smart Array E500\n"
130 #: build/C/man4/cciss.4:49 build/C/man4/hpsa.4:39
132 msgid "Supported hardware"
136 #: build/C/man4/cciss.4:53
137 msgid "The B<cciss> driver supports the following Smart Array boards:"
141 #: build/C/man4/cciss.4:79
144 " Smart Array 5300\n"
147 " Smart Array 5312\n"
150 " Smart Array 6400\n"
151 " Smart Array 6400 U320 Expansion Module\n"
153 " Smart Array P600\n"
154 " Smart Array P800\n"
155 " Smart Array E400\n"
156 " Smart Array P400i\n"
157 " Smart Array E200\n"
158 " Smart Array E200i\n"
159 " Smart Array E500\n"
160 " Smart Array P700m\n"
161 " Smart Array P212\n"
162 " Smart Array P410\n"
163 " Smart Array P410i\n"
164 " Smart Array P411\n"
165 " Smart Array P812\n"
166 " Smart Array P712m\n"
167 " Smart Array P711m\n"
171 #: build/C/man4/cciss.4:80 build/C/man4/hpsa.4:55
173 msgid "Configuration details"
177 #: build/C/man4/cciss.4:89 build/C/man4/hpsa.4:63
179 "To configure HP Smart Array controllers, use the HP Array Configuration "
180 "Utility (either B<hpacuxe>(8) or B<hpacucli>(8)) or the Offline ROM-based "
181 "Configuration Utility (ORCA) run from the Smart Array's option ROM at boot "
186 #: build/C/man4/cciss.4:89 build/C/man4/console.4:91 build/C/man4/dsp56k.4:110 build/C/man4/fd.4:195 build/C/man4/full.4:59 build/C/man4/hd.4:103 build/C/man4/hpsa.4:63 build/C/man4/initrd.4:418 build/C/man4/lp.4:126 build/C/man4/mem.4:78 build/C/man4/mouse.4:180 build/C/man4/null.4:57 build/C/man4/ram.4:41 build/C/man4/random.4:275 build/C/man4/sd.4:131 build/C/man4/sk98lin.4:574 build/C/man4/st.4:879 build/C/man4/ttyS.4:46 build/C/man4/vcs.4:93
192 #: build/C/man4/cciss.4:90 build/C/man4/hpsa.4:64
198 #: build/C/man4/cciss.4:92
199 msgid "The device naming scheme is as follows:"
203 #: build/C/man4/cciss.4:95
205 msgid "Major numbers:\n"
209 #: build/C/man4/cciss.4:104
223 #: build/C/man4/cciss.4:106
225 msgid "Minor numbers:\n"
229 #: build/C/man4/cciss.4:113
232 " b7 b6 b5 b4 b3 b2 b1 b0\n"
233 " |----+----| |----+----|\n"
235 " | +-------- Partition ID (0=wholedev, 1-15 partition)\n"
237 " +-------------------- Logical Volume number\n"
241 #: build/C/man4/cciss.4:115
243 msgid "The device naming scheme is:\n"
247 #: build/C/man4/cciss.4:120
250 " /dev/cciss/c0d0 Controller 0, disk 0, whole device\n"
251 " /dev/cciss/c0d0p1 Controller 0, disk 0, partition 1\n"
252 " /dev/cciss/c0d0p2 Controller 0, disk 0, partition 2\n"
253 " /dev/cciss/c0d0p3 Controller 0, disk 0, partition 3\n"
257 #: build/C/man4/cciss.4:125
260 " /dev/cciss/c1d1 Controller 1, disk 1, whole device\n"
261 " /dev/cciss/c1d1p1 Controller 1, disk 1, partition 1\n"
262 " /dev/cciss/c1d1p2 Controller 1, disk 1, partition 2\n"
263 " /dev/cciss/c1d1p3 Controller 1, disk 1, partition 3\n"
267 #: build/C/man4/cciss.4:126
269 msgid "Files in /proc"
273 #: build/C/man4/cciss.4:132
275 "The files I</proc/driver/cciss/cciss[0-9]+> contain information about the "
276 "configuration of each controller. For example:"
280 #: build/C/man4/cciss.4:152
283 " $ B<cd /proc/driver/cciss>\n"
286 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss0\n"
287 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss1\n"
288 " -rw-r--r-- 1 root root 0 2010-09-10 10:38 cciss2\n"
290 " cciss2: HP Smart Array P800 Controller\n"
291 " Board ID: 0x3223103c\n"
292 " Firmware Version: 7.14\n"
294 " Logical drives: 1\n"
295 " Current Q depth: 0\n"
296 " Current # commands on controller: 0\n"
297 " Max Q depth since init: 1\n"
298 " Max # commands on controller since init: 2\n"
299 " Max SG entries since init: 32\n"
300 " Sequential access devices: 0\n"
304 #: build/C/man4/cciss.4:154
306 msgid " cciss/c2d0: 36.38GB RAID 0\n"
310 #: build/C/man4/cciss.4:155
312 msgid "Files in /sys"
316 #: build/C/man4/cciss.4:156
318 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/model>"
322 #: build/C/man4/cciss.4:162
324 "Displays the SCSI INQUIRY page 0 model for logical drive I<Y> of controller "
329 #: build/C/man4/cciss.4:162
331 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/rev>"
335 #: build/C/man4/cciss.4:168
337 "Displays the SCSI INQUIRY page 0 revision for logical drive I<Y> of "
342 #: build/C/man4/cciss.4:168
344 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/unique_id>"
348 #: build/C/man4/cciss.4:174
350 "Displays the SCSI INQUIRY page 83 serial number for logical drive I<Y> of "
355 #: build/C/man4/cciss.4:174
357 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/vendor>"
361 #: build/C/man4/cciss.4:180
363 "Displays the SCSI INQUIRY page 0 vendor for logical drive I<Y> of controller "
368 #: build/C/man4/cciss.4:180
370 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/block:cciss!cXdY>"
374 #: build/C/man4/cciss.4:184
375 msgid "A symbolic link to I</sys/block/cciss!cXdY>."
379 #: build/C/man4/cciss.4:184
381 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/rescan>"
385 #: build/C/man4/cciss.4:188
387 "When this file is written to, the driver rescans the controller to discover "
388 "any new, removed, or modified logical drives."
392 #: build/C/man4/cciss.4:188
394 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/resettable>"
398 #: build/C/man4/cciss.4:197
400 "A value of 1 displayed in this file indicates that the \"reset_devices=1\" "
401 "kernel parameter (used by B<kdump>) is honored by this controller. A value "
402 "of 0 indicates that the \"reset_devices=1\" kernel parameter will not be "
403 "honored. Some models of Smart Array are not able to honor this parameter."
407 #: build/C/man4/cciss.4:197
409 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/lunid>"
413 #: build/C/man4/cciss.4:203
415 "Displays the 8-byte LUN ID used to address logical drive I<Y> of controller "
420 #: build/C/man4/cciss.4:203
422 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/raid_level>"
426 #: build/C/man4/cciss.4:209
427 msgid "Displays the RAID level of logical drive I<Y> of controller I<X>."
431 #: build/C/man4/cciss.4:209
433 msgid "I</sys/bus/pci/devices/E<lt>devE<gt>/ccissX/cXdY/usage_count>"
437 #: build/C/man4/cciss.4:215
439 "Displays the usage count (number of opens) of logical drive I<Y> of "
444 #: build/C/man4/cciss.4:215
446 msgid "SCSI tape drive and medium changer support"
450 #: build/C/man4/cciss.4:226
452 "SCSI sequential access devices and medium changer devices are supported and "
453 "appropriate device nodes are automatically created (e.g., I</dev/st0>, "
454 "I</dev/st1>, etc.; see B<st>(4) for more details.) You must enable \"SCSI "
455 "tape drive support for Smart Array 5xxx\" and \"SCSI support\" in your "
456 "kernel configuration to be able to use SCSI tape drives with your Smart "
457 "Array 5xxx controller."
461 #: build/C/man4/cciss.4:244
463 "Additionally, note that the driver will not engage the SCSI core at init "
464 "time. The driver must be directed to dynamically engage the SCSI core via "
465 "the I</proc> filesystem entry, which the \"block\" side of the driver "
466 "creates as I</proc/driver/cciss/cciss*> at run time. This is because at "
467 "driver init time, the SCSI core may not yet be initialized (because the "
468 "driver is a block driver) and attempting to register it with the SCSI core "
469 "in such a case would cause a hang. This is best done via an initialization "
470 "script (typically in I</etc/init.d>, but could vary depending on "
471 "distribution). For example:"
475 #: build/C/man4/cciss.4:250
478 " for x in /proc/driver/cciss/cciss[0-9]*\n"
480 " echo \"engage scsi\" E<gt> $x\n"
485 #: build/C/man4/cciss.4:254
487 "Once the SCSI core is engaged by the driver, it cannot be disengaged (except "
488 "by unloading the driver, if it happens to be linked as a module.)"
492 #: build/C/man4/cciss.4:258
494 "Note also that if no sequential access devices or medium changers are "
495 "detected, the SCSI core will not be engaged by the action of the above "
500 #: build/C/man4/cciss.4:258
502 msgid "Hot plug support for SCSI tape drives"
506 #: build/C/man4/cciss.4:268
508 "Hot plugging of SCSI tape drives is supported, with some caveats. The "
509 "B<cciss> driver must be informed that changes to the SCSI bus have been "
510 "made. This may be done via the I</proc> filesystem. For example:"
514 #: build/C/man4/cciss.4:270
516 msgid " echo \"rescan\" E<gt> /proc/scsi/cciss0/1\n"
520 #: build/C/man4/cciss.4:272
521 msgid "This causes the driver to:"
525 #: build/C/man4/cciss.4:273 build/C/man4/initrd.4:97 build/C/man4/initrd.4:323 build/C/man4/initrd.4:430 build/C/man4/st.4:892 build/C/man7/uri.7:532
531 #: build/C/man4/cciss.4:276
533 "query the adapter about changes to the physical SCSI buses and/or fibre "
534 "channel arbitrated loop, and"
538 #: build/C/man4/cciss.4:276 build/C/man4/initrd.4:101 build/C/man4/initrd.4:331 build/C/man4/initrd.4:441 build/C/man4/st.4:912 build/C/man7/uri.7:536
544 #: build/C/man4/cciss.4:279
546 "make note of any new or removed sequential access devices or medium "
551 #: build/C/man4/cciss.4:286
553 "The driver will output messages indicating which devices have been added or "
554 "removed and the controller, bus, target, and lun used to address each "
555 "device. The driver then notifies the SCSI midlayer of these changes."
559 #: build/C/man4/cciss.4:293
561 "Note that the naming convention of the I</proc> filesystem entries contains "
562 "a number in addition to the driver name (e.g., \"cciss0\" instead of just "
563 "\"cciss\", which you might expect)."
567 #: build/C/man4/cciss.4:311
569 "Note: I<Only> sequential access devices and medium changers are presented as "
570 "SCSI devices to the SCSI midlayer by the B<cciss> driver. Specifically, "
571 "physical SCSI disk drives are I<not> presented to the SCSI midlayer. The "
572 "only disk devices that are presented to the kernel are logical drives that "
573 "the array controller constructs from regions on the physical drives. The "
574 "logical drives are presented to the block layer (not to the SCSI midlayer). "
575 "It is important for the driver to prevent the kernel from accessing the "
576 "physical drives directly, since these drives are used by the array "
577 "controller to construct the logical drives."
581 #: build/C/man4/cciss.4:311
583 msgid "SCSI error handling for tape drives and medium changers"
587 #: build/C/man4/cciss.4:319
589 "The Linux SCSI midlayer provides an error-handling protocol that is "
590 "initiated whenever a SCSI command fails to complete within a certain amount "
591 "of time (which can vary depending on the command). The B<cciss> driver "
592 "participates in this protocol to some extent. The normal protocol is a "
597 #: build/C/man4/cciss.4:319 build/C/man4/cciss.4:321 build/C/man4/cciss.4:323 build/C/man4/cciss.4:325 build/C/man5/core.5:49 build/C/man5/core.5:61 build/C/man5/core.5:65 build/C/man5/core.5:69 build/C/man5/core.5:72 build/C/man5/core.5:85 build/C/man5/core.5:88 build/C/man5/core.5:101 build/C/man5/core.5:218 build/C/man5/core.5:222 build/C/man5/core.5:225 build/C/man5/core.5:229
603 #: build/C/man4/cciss.4:321
604 msgid "First, the device is told to abort the command."
608 #: build/C/man4/cciss.4:323
609 msgid "If that doesn't work, the device is reset."
613 #: build/C/man4/cciss.4:325
614 msgid "If that doesn't work, the SCSI bus is reset."
618 #: build/C/man4/cciss.4:327
619 msgid "If that doesn't work, the host bus adapter is reset."
623 #: build/C/man4/cciss.4:345
625 "The B<cciss> driver is a block driver as well as a SCSI driver and only the "
626 "tape drives and medium changers are presented to the SCSI midlayer "
627 "Furthermore, unlike more straightforward SCSI drivers, disk I/O continues "
628 "through the block side during the SCSI error-recovery process Therefore, the "
629 "B<cciss> driver implements only the first two of these actions, aborting the "
630 "command, and resetting the device. Note also that most tape drives will not "
631 "oblige in aborting commands, and sometimes it appears they will not even "
632 "obey a reset command, though in most circumstances they will. If the "
633 "command cannot be aborted and the device cannot be reset, the device will be "
638 #: build/C/man4/cciss.4:353
640 "In the event that the error-handling code is triggered and a tape drive is "
641 "successfully reset or the tardy command is successfully aborted, the tape "
642 "drive may still not allow I/O to continue until some command is issued that "
643 "positions the tape to a known position. Typically you must rewind the tape "
644 "(by issuing I<mt -f /dev/st0 rewind> for example) before I/O can proceed "
645 "again to a tape drive that was reset."
649 #: build/C/man4/cciss.4:353 build/C/man4/console.4:95 build/C/man4/console_codes.4:642 build/C/man4/console_ioctl.4:846 build/C/man5/core.5:423 build/C/man4/cpuid.4:89 build/C/man4/dsp56k.4:115 build/C/man4/fd.4:214 build/C/man7/fifo.7:65 build/C/man4/full.4:61 build/C/man3/gnu_get_libc_version.3:76 build/C/man4/hd.4:105 build/C/man4/hpsa.4:179 build/C/man4/initrd.4:474 build/C/man4/lp.4:135 build/C/man3/makedev.3:80 build/C/man4/mem.4:84 build/C/man3/mkfifo.3:197 build/C/man2/mknod.2:284 build/C/man4/mouse.4:184 build/C/man4/msr.4:55 build/C/man4/null.4:64 build/C/man7/pipe.7:232 build/C/man4/ram.4:43 build/C/man4/random.4:282 build/C/man3/setlogmask.3:78 build/C/man4/sk98lin.4:598 build/C/man4/st.4:954 build/C/man2/syslog.2:309 build/C/man3/syslog.3:315 build/C/man4/ttyS.4:48 build/C/man7/uri.7:706 build/C/man4/vcs.4:173 build/C/man4/wavelan.4:138
655 #: build/C/man4/cciss.4:358
656 msgid "B<cciss_vol_status>(8), B<hpsa>(4), B<hpacucli>(8), B<hpacuxe>(8),"
660 #. Don Brace, Steve Cameron, Chase Maupin, Mike Miller, Michael Ni,
661 #. Charles White, Francis Wiran
662 #. and probably some other people.
664 #: build/C/man4/cciss.4:370
666 "E<.UR http://cciss.sf.net> E<.UE ,> and I<Documentation/blockdev/cciss.txt> "
667 "and I<Documentation/ABI/testing/sysfs-bus-pci-devices-cciss> in the Linux "
672 #: build/C/man4/cciss.4:370 build/C/man4/console.4:112 build/C/man4/console_codes.4:646 build/C/man4/console_ioctl.4:873 build/C/man5/core.5:434 build/C/man4/cpuid.4:96 build/C/man4/dsp56k.4:121 build/C/man4/fd.4:222 build/C/man7/fifo.7:74 build/C/man4/full.4:65 build/C/man3/gnu_get_libc_version.3:78 build/C/man4/hd.4:110 build/C/man4/hpsa.4:197 build/C/man4/initrd.4:484 build/C/man4/lp.4:141 build/C/man3/makedev.3:83 build/C/man4/mem.4:88 build/C/man3/mkfifo.3:206 build/C/man2/mknod.2:297 build/C/man4/mouse.4:187 build/C/man4/msr.4:59 build/C/man4/null.4:68 build/C/man7/pipe.7:244 build/C/man4/ram.4:47 build/C/man4/random.4:286 build/C/man4/sd.4:137 build/C/man3/setlogmask.3:82 build/C/man4/sk98lin.4:602 build/C/man4/st.4:964 build/C/man3/stdarg.3:338 build/C/man2/syslog.2:312 build/C/man3/syslog.3:320 build/C/man4/ttyS.4:55 build/C/man7/uri.7:715 build/C/man4/vcs.4:178 build/C/man4/wavelan.4:145
678 #: build/C/man4/cciss.4:378 build/C/man4/console.4:120 build/C/man4/console_codes.4:654 build/C/man4/console_ioctl.4:881 build/C/man5/core.5:442 build/C/man4/cpuid.4:104 build/C/man4/dsp56k.4:129 build/C/man4/fd.4:230 build/C/man7/fifo.7:82 build/C/man4/full.4:73 build/C/man3/gnu_get_libc_version.3:86 build/C/man4/hd.4:118 build/C/man4/hpsa.4:205 build/C/man4/initrd.4:492 build/C/man4/lp.4:149 build/C/man3/makedev.3:91 build/C/man4/mem.4:96 build/C/man3/mkfifo.3:214 build/C/man2/mknod.2:305 build/C/man4/mouse.4:195 build/C/man4/msr.4:67 build/C/man4/null.4:76 build/C/man7/pipe.7:252 build/C/man4/ram.4:55 build/C/man4/random.4:294 build/C/man4/sd.4:145 build/C/man3/setlogmask.3:90 build/C/man4/sk98lin.4:610 build/C/man4/st.4:972 build/C/man3/stdarg.3:346 build/C/man2/syslog.2:320 build/C/man3/syslog.3:328 build/C/man4/ttyS.4:63 build/C/man7/uri.7:723 build/C/man4/vcs.4:186 build/C/man4/wavelan.4:153
680 "This page is part of release 3.67 of the Linux I<man-pages> project. A "
681 "description of the project, information about reporting bugs, and the latest "
682 "version of this page, can be found at "
683 "\\%http://www.kernel.org/doc/man-pages/."
687 #: build/C/man4/console.4:12
693 #: build/C/man4/console.4:12
699 #: build/C/man4/console.4:15
700 msgid "console - console terminal and virtual consoles"
704 #: build/C/man4/console.4:37
706 "A Linux system has up to 63 I<virtual consoles> (character devices with "
707 "major number 4 and minor number 1 to 63), usually called I</dev/ttyn> with 1 "
708 "\\(E<lt>= I<n> \\(E<lt>= 63. The current console is also addressed by "
709 "I</dev/console> or I</dev/tty0>, the character device with major number 4 "
710 "and minor number 0. The device files I</dev/*> are usually created using "
711 "the script MAKEDEV, or using B<mknod>(1), usually with mode 0622 and owner "
716 #: build/C/man4/console.4:45
718 "Before kernel version 1.1.54 the number of virtual consoles was compiled "
719 "into the kernel (in I<tty.h>: #define NR_CONSOLES 8) and could be changed "
720 "by editing and recompiling. Since version 1.1.54 virtual consoles are "
721 "created on the fly, as soon as they are needed."
725 #: build/C/man4/console.4:63
727 "Common ways to start a process on a console are: (a) tell B<init>(8) (in "
728 "B<inittab>(5)) to start a B<mingetty>(8) (or B<agetty>(8)) on the "
729 "console; (b) ask B<openvt>(1) to start a process on the console; (c) start "
730 "X\\(emit will find the first unused console, and display its output there. "
731 "(There is also the ancient B<doshell>(8).)"
735 #: build/C/man4/console.4:76
737 "Common ways to switch consoles are: (a) use Alt+FI<n> or Ctrl+Alt+FI<n> to "
738 "switch to console I<n>; AltGr+FI<n> might bring you to console I<n>+12 [here "
739 "Alt and AltGr refer to the left and right Alt keys, respectively]; (b) use "
740 "Alt+RightArrow or Alt+LeftArrow to cycle through the presently allocated "
741 "consoles; (c) use the program B<chvt>(1). (The key mapping is user "
742 "settable, see B<loadkeys>(1); the above mentioned key combinations are "
743 "according to the default settings.)"
747 #: build/C/man4/console.4:83
749 "The command B<deallocvt>(1) (formerly B<disalloc>) will free the memory "
750 "taken by the screen buffers for consoles that no longer have any associated "
755 #: build/C/man4/console.4:83
761 #: build/C/man4/console.4:91
763 "Consoles carry a lot of state. I hope to document that some other time. "
764 "The most important fact is that the consoles simulate vt100 terminals. In "
765 "particular, a console is reset to the initial state by printing the two "
766 "characters ESC c. All escape sequences can be found in B<console_codes>(4)."
770 #: build/C/man4/console.4:93
771 msgid "I</dev/console>"
775 #: build/C/man4/console.4:95
780 #: build/C/man4/console.4:112
782 "B<chvt>(1), B<deallocvt>(1), B<loadkeys>(1), B<mknod>(1), B<openvt>(1), "
783 "B<console_codes>(4), B<console_ioctl>(4), B<tty>(4), B<ttyS>(4), "
784 "B<charsets>(7), B<agetty>(8), B<init>(8), B<mapscrn>(8), B<mingetty>(8), "
785 "B<resizecons>(8), B<setfont>(8)"
789 #: build/C/man4/console_codes.4:23
791 msgid "CONSOLE_CODES"
795 #: build/C/man4/console_codes.4:26
796 msgid "console_codes - Linux console escape and control sequences"
800 #: build/C/man4/console_codes.4:33
802 "The Linux console implements a large subset of the VT102 and ECMA-48/ISO "
803 "6429/ANSI X3.64 terminal controls, plus certain private-mode sequences for "
804 "changing the color palette, character-set mapping, and so on. In the "
805 "tabular descriptions below, the second column gives ECMA-48 or DEC mnemonics "
806 "(the latter if prefixed with DEC) for the given function. Sequences without "
807 "a mnemonic are neither ECMA-48 nor VT102."
811 #: build/C/man4/console_codes.4:38
813 "After all the normal output processing has been done, and a stream of "
814 "characters arrives at the console driver for actual printing, the first "
815 "thing that happens is a translation from the code used for processing to the "
816 "code used for printing."
820 #: build/C/man4/console_codes.4:44
822 "If the console is in UTF-8 mode, then the incoming bytes are first assembled "
823 "into 16-bit Unicode codes. Otherwise, each byte is transformed according to "
824 "the current mapping table (which translates it to a Unicode value). See the "
825 "B<Character Sets> section below for discussion."
829 #: build/C/man4/console_codes.4:50
831 "In the normal case, the Unicode value is converted to a font index, and this "
832 "is stored in video memory, so that the corresponding glyph (as found in "
833 "video ROM) appears on the screen. Note that the use of Unicode (and the "
834 "design of the PC hardware) allows us to use 512 different glyphs "
839 #: build/C/man4/console_codes.4:57
841 "If the current Unicode value is a control character, or we are currently "
842 "processing an escape sequence, the value will treated specially. Instead of "
843 "being turned into a font index and rendered as a glyph, it may trigger "
844 "cursor movement or other control functions. See the B<Linux Console "
845 "Controls> section below for discussion."
849 #: build/C/man4/console_codes.4:69
851 "It is generally not good practice to hard-wire terminal controls into "
852 "programs. Linux supports a B<terminfo>(5) database of terminal "
853 "capabilities. Rather than emitting console escape sequences by hand, you "
854 "will almost always want to use a terminfo-aware screen library or utility "
855 "such as B<ncurses>(3), B<tput>(1), or B<reset>(1)."
859 #: build/C/man4/console_codes.4:69
861 msgid "Linux console controls"
865 #: build/C/man4/console_codes.4:73
867 "This section describes all the control characters and escape sequences that "
868 "invoke special functions (i.e., anything other than writing a glyph at the "
869 "current cursor location) on the Linux console."
873 #: build/C/man4/console_codes.4:75
874 msgid "B<Control characters>"
878 #: build/C/man4/console_codes.4:86
880 "A character is a control character if (before transformation according to "
881 "the mapping table) it has one of the 14 codes 00 (NUL), 07 (BEL), 08 (BS), "
882 "09 (HT), 0a (LF), 0b (VT), 0c (FF), 0d (CR), 0e (SO), 0f (SI), 18 (CAN), 1a "
883 "(SUB), 1b (ESC), 7f (DEL). One can set a \"display control characters\" "
884 "mode (see below), and allow 07, 09, 0b, 18, 1a, 7f to be displayed as "
885 "glyphs. On the other hand, in UTF-8 mode all codes 00-1f are regarded as "
886 "control characters, regardless of any \"display control characters\" mode."
890 #: build/C/man4/console_codes.4:95
892 "If we have a control character, it is acted upon immediately and then "
893 "discarded (even in the middle of an escape sequence) and the escape "
894 "sequence continues with the next character. (However, ESC starts a new "
895 "escape sequence, possibly aborting a previous unfinished one, and CAN and "
896 "SUB abort any escape sequence.) The recognized control characters are BEL, "
897 "BS, HT, LF, VT, FF, CR, SO, SI, CAN, SUB, ESC, DEL, CSI. They do what one "
902 #: build/C/man4/console_codes.4:97
903 msgid "BEL (0x07, B<^G>) beeps;"
907 #: build/C/man4/console_codes.4:100
909 "BS (0x08, B<^H>) backspaces one column (but not past the beginning of the "
914 #: build/C/man4/console_codes.4:103
916 "HT (0x09, B<^I>) goes to the next tab stop or to the end of the line if "
917 "there is no earlier tab stop;"
921 #: build/C/man4/console_codes.4:107
923 "LF (0x0A, B<^J>), VT (0x0B, B<^K>) and FF (0x0C, B<^L>) all give a linefeed, "
924 "and if LF/NL (new-line mode) is set also a carriage return;"
928 #: build/C/man4/console_codes.4:109
929 msgid "CR (0x0D, B<^M>) gives a carriage return;"
933 #: build/C/man4/console_codes.4:111
934 msgid "SO (0x0E, B<^N>) activates the G1 character set;"
938 #: build/C/man4/console_codes.4:113
939 msgid "SI (0x0F, B<^O>) activates the G0 character set;"
943 #: build/C/man4/console_codes.4:115
944 msgid "CAN (0x18, B<^X>) and SUB (0x1A, B<^Z>) interrupt escape sequences;"
948 #: build/C/man4/console_codes.4:117
949 msgid "ESC (0x1B, B<^[>) starts an escape sequence;"
953 #: build/C/man4/console_codes.4:119
954 msgid "DEL (0x7F) is ignored;"
958 #: build/C/man4/console_codes.4:121
959 msgid "CSI (0x9B) is equivalent to ESC [."
963 #: build/C/man4/console_codes.4:123
964 msgid "B<ESC- but not CSI-sequences>"
968 #: build/C/man4/console_codes.4:125
970 msgid "ESC c\tRIS\tReset.\n"
974 #: build/C/man4/console_codes.4:126
976 msgid "ESC D\tIND\tLinefeed.\n"
980 #: build/C/man4/console_codes.4:127
982 msgid "ESC E\tNEL\tNewline.\n"
986 #: build/C/man4/console_codes.4:128
988 msgid "ESC H\tHTS\tSet tab stop at current column.\n"
992 #: build/C/man4/console_codes.4:129
994 msgid "ESC M\tRI\tReverse linefeed.\n"
998 #: build/C/man4/console_codes.4:130
1000 msgid "ESC Z\tDECID\tT{\n"
1004 #: build/C/man4/console_codes.4:131
1006 msgid "DEC private identification. The kernel\n"
1010 #: build/C/man4/console_codes.4:132
1012 msgid "returns the string ESC [ ? 6 c, claiming\n"
1016 #: build/C/man4/console_codes.4:133
1018 msgid "that it is a VT102.\n"
1022 #: build/C/man4/console_codes.4:134 build/C/man4/console_codes.4:138 build/C/man4/console_codes.4:163 build/C/man4/console_codes.4:243 build/C/man4/console_codes.4:249 build/C/man4/console_codes.4:253 build/C/man4/console_codes.4:260
1028 #: build/C/man4/console_codes.4:135
1030 msgid "ESC 7\tDECSC\tT{\n"
1034 #: build/C/man4/console_codes.4:136
1036 msgid "Save current state (cursor coordinates,\n"
1040 #: build/C/man4/console_codes.4:137
1042 msgid "attributes, character sets pointed at by G0, G1).\n"
1046 #: build/C/man4/console_codes.4:139
1048 msgid "ESC 8\tDECRC\tRestore state most recently saved by ESC 7.\n"
1052 #: build/C/man4/console_codes.4:140
1054 msgid "ESC [\tCSI\tControl sequence introducer\n"
1058 #: build/C/man4/console_codes.4:141
1060 msgid "ESC %\t\tStart sequence selecting character set\n"
1064 #: build/C/man4/console_codes.4:142
1066 msgid "ESC % @\t\t\\0\\0\\0Select default (ISO 646 / ISO 8859-1)\n"
1070 #: build/C/man4/console_codes.4:143
1072 msgid "ESC % G\t\t\\0\\0\\0Select UTF-8\n"
1076 #: build/C/man4/console_codes.4:144
1078 msgid "ESC % 8\t\t\\0\\0\\0Select UTF-8 (obsolete)\n"
1082 #: build/C/man4/console_codes.4:145
1084 msgid "ESC # 8\tDECALN\tDEC screen alignment test - fill screen with E's.\n"
1088 #: build/C/man4/console_codes.4:146
1090 msgid "ESC (\t\tStart sequence defining G0 character set\n"
1094 #: build/C/man4/console_codes.4:147
1096 msgid "ESC ( B\t\t\\0\\0\\0Select default (ISO 8859-1 mapping)\n"
1100 #: build/C/man4/console_codes.4:148
1102 msgid "ESC ( 0\t\t\\0\\0\\0Select VT100 graphics mapping\n"
1106 #: build/C/man4/console_codes.4:149
1108 msgid "ESC ( U\t\t\\0\\0\\0Select null mapping - straight to character ROM\n"
1112 #: build/C/man4/console_codes.4:150
1114 msgid "ESC ( K\t\t\\0\\0\\0Select user mapping - the map that is loaded by\n"
1118 #: build/C/man4/console_codes.4:151
1120 msgid "\t\t\\0\\0\\0the utility B<mapscrn>(8).\n"
1124 #: build/C/man4/console_codes.4:152
1126 msgid "ESC )\t\tStart sequence defining G1\n"
1130 #: build/C/man4/console_codes.4:153
1132 msgid "\t\t(followed by one of B, 0, U, K, as above).\n"
1136 #: build/C/man4/console_codes.4:154
1138 msgid "ESC E<gt>\tDECPNM\tSet numeric keypad mode\n"
1142 #: build/C/man4/console_codes.4:155
1144 msgid "ESC =\tDECPAM\tSet application keypad mode\n"
1148 #: build/C/man4/console_codes.4:156
1150 msgid "ESC ]\tOSC\tT{\n"
1154 #: build/C/man4/console_codes.4:157
1156 msgid "(Should be: Operating system command)\n"
1160 #: build/C/man4/console_codes.4:158
1162 msgid "ESC ] P I<nrrggbb>: set palette, with parameter\n"
1166 #: build/C/man4/console_codes.4:159
1168 msgid "given in 7 hexadecimal digits after the final P :-(.\n"
1172 #: build/C/man4/console_codes.4:160
1174 msgid "Here I<n> is the color (0-15), and I<rrggbb> indicates\n"
1178 #: build/C/man4/console_codes.4:161
1180 msgid "the red/green/blue values (0-255).\n"
1184 #: build/C/man4/console_codes.4:162
1186 msgid "ESC ] R: reset palette\n"
1190 #: build/C/man4/console_codes.4:167
1191 msgid "B<ECMA-48 CSI sequences>"
1195 #: build/C/man4/console_codes.4:173
1197 "CSI (or ESC [) is followed by a sequence of parameters, at most NPAR (16), "
1198 "that are decimal numbers separated by semicolons. An empty or absent "
1199 "parameter is taken to be 0. The sequence of parameters may be preceded by a "
1200 "single question mark."
1204 #: build/C/man4/console_codes.4:177
1206 "However, after CSI [ (or ESC [ [) a single character is read and this entire "
1207 "sequence is ignored. (The idea is to ignore an echoed function key.)"
1211 #: build/C/man4/console_codes.4:179
1212 msgid "The action of a CSI sequence is determined by its final character."
1216 #: build/C/man4/console_codes.4:181
1218 msgid "@\tICH\tInsert the indicated # of blank characters.\n"
1222 #: build/C/man4/console_codes.4:182
1224 msgid "A\tCUU\tMove cursor up the indicated # of rows.\n"
1228 #: build/C/man4/console_codes.4:183
1230 msgid "B\tCUD\tMove cursor down the indicated # of rows.\n"
1234 #: build/C/man4/console_codes.4:184
1236 msgid "C\tCUF\tMove cursor right the indicated # of columns.\n"
1240 #: build/C/man4/console_codes.4:185
1242 msgid "D\tCUB\tMove cursor left the indicated # of columns.\n"
1246 #: build/C/man4/console_codes.4:186
1248 msgid "E\tCNL\tMove cursor down the indicated # of rows, to column 1.\n"
1252 #: build/C/man4/console_codes.4:187
1254 msgid "F\tCPL\tMove cursor up the indicated # of rows, to column 1.\n"
1258 #: build/C/man4/console_codes.4:188
1260 msgid "G\tCHA\tMove cursor to indicated column in current row.\n"
1264 #: build/C/man4/console_codes.4:189
1266 msgid "H\tCUP\tMove cursor to the indicated row, column (origin at 1,1).\n"
1270 #: build/C/man4/console_codes.4:190
1272 msgid "J\tED\tErase display (default: from cursor to end of display).\n"
1276 #: build/C/man4/console_codes.4:191
1278 msgid "\t\tESC [ 1 J: erase from start to cursor.\n"
1282 #: build/C/man4/console_codes.4:192
1284 msgid "\t\tESC [ 2 J: erase whole display.\n"
1288 #: build/C/man4/console_codes.4:193
1290 msgid "\t\tESC [ 3 J: erase whole display including scroll-back\n"
1294 #: build/C/man4/console_codes.4:194
1296 msgid "\t\t buffer (since Linux 3.0).\n"
1299 #. ESC [ 3 J: commit f8df13e0a901fe55631fed66562369b4dba40f8b
1301 #: build/C/man4/console_codes.4:196
1303 msgid "K\tEL\tErase line (default: from cursor to end of line).\n"
1307 #: build/C/man4/console_codes.4:197
1309 msgid "\t\tESC [ 1 K: erase from start of line to cursor.\n"
1313 #: build/C/man4/console_codes.4:198
1315 msgid "\t\tESC [ 2 K: erase whole line.\n"
1319 #: build/C/man4/console_codes.4:199
1321 msgid "L\tIL\tInsert the indicated # of blank lines.\n"
1325 #: build/C/man4/console_codes.4:200
1327 msgid "M\tDL\tDelete the indicated # of lines.\n"
1331 #: build/C/man4/console_codes.4:201
1333 msgid "P\tDCH\tDelete the indicated # of characters on current line.\n"
1337 #: build/C/man4/console_codes.4:202
1339 msgid "X\tECH\tErase the indicated # of characters on current line.\n"
1343 #: build/C/man4/console_codes.4:203
1345 msgid "a\tHPR\tMove cursor right the indicated # of columns.\n"
1349 #: build/C/man4/console_codes.4:204
1351 msgid "c\tDA\tAnswer ESC [ ? 6 c: \"I am a VT102\".\n"
1355 #: build/C/man4/console_codes.4:205
1357 msgid "d\tVPA\tMove cursor to the indicated row, current column.\n"
1361 #: build/C/man4/console_codes.4:206
1363 msgid "e\tVPR\tMove cursor down the indicated # of rows.\n"
1367 #: build/C/man4/console_codes.4:207
1369 msgid "f\tHVP\tMove cursor to the indicated row, column.\n"
1373 #: build/C/man4/console_codes.4:208
1375 msgid "g\tTBC\tWithout parameter: clear tab stop at current position.\n"
1379 #: build/C/man4/console_codes.4:209
1381 msgid "\t\tESC [ 3 g: delete all tab stops.\n"
1385 #: build/C/man4/console_codes.4:210
1387 msgid "h\tSM\tSet Mode (see below).\n"
1391 #: build/C/man4/console_codes.4:211
1393 msgid "l\tRM\tReset Mode (see below).\n"
1397 #: build/C/man4/console_codes.4:212
1399 msgid "m\tSGR\tSet attributes (see below).\n"
1403 #: build/C/man4/console_codes.4:213
1405 msgid "n\tDSR\tStatus report (see below).\n"
1409 #: build/C/man4/console_codes.4:214
1411 msgid "q\tDECLL\tSet keyboard LEDs.\n"
1415 #: build/C/man4/console_codes.4:215
1417 msgid "\t\tESC [ 0 q: clear all LEDs\n"
1421 #: build/C/man4/console_codes.4:216
1423 msgid "\t\tESC [ 1 q: set Scroll Lock LED\n"
1427 #: build/C/man4/console_codes.4:217
1429 msgid "\t\tESC [ 2 q: set Num Lock LED\n"
1433 #: build/C/man4/console_codes.4:218
1435 msgid "\t\tESC [ 3 q: set Caps Lock LED\n"
1439 #: build/C/man4/console_codes.4:219
1441 msgid "r\tDECSTBM\tSet scrolling region; parameters are top and bottom row.\n"
1445 #: build/C/man4/console_codes.4:220
1447 msgid "s\t?\tSave cursor location.\n"
1451 #: build/C/man4/console_codes.4:221
1453 msgid "u\t?\tRestore cursor location.\n"
1457 #: build/C/man4/console_codes.4:222
1459 msgid "\\`\tHPA\tMove cursor to indicated column in current row.\n"
1463 #: build/C/man4/console_codes.4:226
1464 msgid "B<ECMA-48 Set Graphics Rendition>"
1468 #: build/C/man4/console_codes.4:233
1470 "The ECMA-48 SGR sequence ESC [ I<parameters> m sets display attributes. "
1471 "Several attributes can be set in the same sequence, separated by "
1472 "semicolons. An empty parameter (between semicolons or string initiator or "
1473 "terminator) is interpreted as a zero."
1477 #: build/C/man4/console_codes.4:235
1479 msgid "param\tresult\n"
1483 #: build/C/man4/console_codes.4:236
1485 msgid "0\treset all attributes to their defaults\n"
1489 #: build/C/man4/console_codes.4:237
1491 msgid "1\tset bold\n"
1495 #: build/C/man4/console_codes.4:238
1497 msgid "2\tset half-bright (simulated with color on a color display)\n"
1501 #: build/C/man4/console_codes.4:239
1507 #: build/C/man4/console_codes.4:240
1509 msgid "set underscore (simulated with color on a color display)\n"
1513 #: build/C/man4/console_codes.4:241
1515 msgid "(the colors used to simulate dim or underline are set\n"
1519 #: build/C/man4/console_codes.4:242
1521 msgid "using ESC ] ...)\n"
1525 #: build/C/man4/console_codes.4:244
1527 msgid "5\tset blink\n"
1531 #: build/C/man4/console_codes.4:245
1533 msgid "7\tset reverse video\n"
1537 #: build/C/man4/console_codes.4:246
1543 #: build/C/man4/console_codes.4:247
1545 msgid "reset selected mapping, display control flag,\n"
1549 #: build/C/man4/console_codes.4:248
1551 msgid "and toggle meta flag (ECMA-48 says \"primary font\").\n"
1555 #: build/C/man4/console_codes.4:250
1561 #: build/C/man4/console_codes.4:251 build/C/man4/console_codes.4:255
1563 msgid "select null mapping, set display control flag,\n"
1567 #: build/C/man4/console_codes.4:252
1569 msgid "reset toggle meta flag (ECMA-48 says \"first alternate font\").\n"
1573 #: build/C/man4/console_codes.4:254
1579 #: build/C/man4/console_codes.4:256
1581 msgid "set toggle meta flag (ECMA-48 says \"second alternate font\").\n"
1585 #: build/C/man4/console_codes.4:257
1587 msgid "The toggle meta flag\n"
1591 #: build/C/man4/console_codes.4:258
1593 msgid "causes the high bit of a byte to be toggled\n"
1597 #: build/C/man4/console_codes.4:259
1599 msgid "before the mapping table translation is done.\n"
1603 #: build/C/man4/console_codes.4:261
1605 msgid "21\tset normal intensity (ECMA-48 says \"doubly underlined\")\n"
1609 #: build/C/man4/console_codes.4:262
1611 msgid "22\tset normal intensity\n"
1615 #: build/C/man4/console_codes.4:263
1617 msgid "24\tunderline off\n"
1621 #: build/C/man4/console_codes.4:264
1623 msgid "25\tblink off\n"
1627 #: build/C/man4/console_codes.4:265
1629 msgid "27\treverse video off\n"
1633 #: build/C/man4/console_codes.4:266
1635 msgid "30\tset black foreground\n"
1639 #: build/C/man4/console_codes.4:267
1641 msgid "31\tset red foreground\n"
1645 #: build/C/man4/console_codes.4:268
1647 msgid "32\tset green foreground\n"
1651 #: build/C/man4/console_codes.4:269
1653 msgid "33\tset brown foreground\n"
1657 #: build/C/man4/console_codes.4:270
1659 msgid "34\tset blue foreground\n"
1663 #: build/C/man4/console_codes.4:271
1665 msgid "35\tset magenta foreground\n"
1669 #: build/C/man4/console_codes.4:272
1671 msgid "36\tset cyan foreground\n"
1675 #: build/C/man4/console_codes.4:273
1677 msgid "37\tset white foreground\n"
1681 #: build/C/man4/console_codes.4:274
1683 msgid "38\tset underscore on, set default foreground color\n"
1687 #: build/C/man4/console_codes.4:275
1689 msgid "39\tset underscore off, set default foreground color\n"
1693 #: build/C/man4/console_codes.4:276
1695 msgid "40\tset black background\n"
1699 #: build/C/man4/console_codes.4:277
1701 msgid "41\tset red background\n"
1705 #: build/C/man4/console_codes.4:278
1707 msgid "42\tset green background\n"
1711 #: build/C/man4/console_codes.4:279
1713 msgid "43\tset brown background\n"
1717 #: build/C/man4/console_codes.4:280
1719 msgid "44\tset blue background\n"
1723 #: build/C/man4/console_codes.4:281
1725 msgid "45\tset magenta background\n"
1729 #: build/C/man4/console_codes.4:282
1731 msgid "46\tset cyan background\n"
1735 #: build/C/man4/console_codes.4:283
1737 msgid "47\tset white background\n"
1741 #: build/C/man4/console_codes.4:284
1743 msgid "49\tset default background color\n"
1747 #: build/C/man4/console_codes.4:288
1748 msgid "B<ECMA-48 Mode Switches>"
1752 #: build/C/man4/console_codes.4:288
1758 #: build/C/man4/console_codes.4:291
1759 msgid "DECCRM (default off): Display control chars."
1763 #: build/C/man4/console_codes.4:291
1769 #: build/C/man4/console_codes.4:294
1770 msgid "DECIM (default off): Set insert mode."
1774 #: build/C/man4/console_codes.4:294
1780 #: build/C/man4/console_codes.4:298
1781 msgid "LF/NL (default off): Automatically follow echo of LF, VT or FF with CR."
1785 #: build/C/man4/console_codes.4:301
1786 msgid "B<ECMA-48 Status Report Commands>"
1790 #: build/C/man4/console_codes.4:301
1796 #: build/C/man4/console_codes.4:304
1797 msgid "Device status report (DSR): Answer is ESC [ 0 n (Terminal OK)."
1801 #: build/C/man4/console_codes.4:304
1807 #: build/C/man4/console_codes.4:309
1809 "Cursor position report (CPR): Answer is ESC [ I<y> ; I<x> R, where I<x,y> is "
1810 "the cursor location."
1814 #: build/C/man4/console_codes.4:311
1815 msgid "B<DEC Private Mode (DECSET/DECRST) sequences>"
1819 #: build/C/man4/console_codes.4:317
1821 "These are not described in ECMA-48. We list the Set Mode sequences; the "
1822 "Reset Mode sequences are obtained by replacing the final \\(aqh\\(aq by "
1827 #: build/C/man4/console_codes.4:317
1833 #: build/C/man4/console_codes.4:321
1835 "DECCKM (default off): When set, the cursor keys send an ESC O prefix, rather "
1840 #: build/C/man4/console_codes.4:321
1846 #: build/C/man4/console_codes.4:328
1848 "DECCOLM (default off = 80 columns): 80/132 col mode switch. The driver "
1849 "sources note that this alone does not suffice; some user-mode utility such "
1850 "as B<resizecons>(8) has to change the hardware registers on the console "
1855 #: build/C/man4/console_codes.4:328
1861 #: build/C/man4/console_codes.4:331
1862 msgid "DECSCNM (default off): Set reverse-video mode."
1866 #: build/C/man4/console_codes.4:331
1872 #: build/C/man4/console_codes.4:335
1874 "DECOM (default off): When set, cursor addressing is relative to the upper "
1875 "left corner of the scrolling region."
1879 #: build/C/man4/console_codes.4:335
1885 #: build/C/man4/console_codes.4:341
1887 "DECAWM (default on): Set autowrap on. In this mode, a graphic character "
1888 "emitted after column 80 (or column 132 of DECCOLM is on) forces a wrap to "
1889 "the beginning of the following line first."
1893 #: build/C/man4/console_codes.4:341
1899 #: build/C/man4/console_codes.4:344
1900 msgid "DECARM (default on): Set keyboard autorepeat on."
1904 #: build/C/man4/console_codes.4:344
1910 #: build/C/man4/console_codes.4:348
1912 "X10 Mouse Reporting (default off): Set reporting mode to 1 (or reset to "
1917 #: build/C/man4/console_codes.4:348
1919 msgid "ESC [ ? 25 h"
1923 #: build/C/man4/console_codes.4:351
1924 msgid "DECTECM (default on): Make cursor visible."
1928 #: build/C/man4/console_codes.4:351
1930 msgid "ESC [ ? 1000 h"
1934 #: build/C/man4/console_codes.4:356
1936 "X11 Mouse Reporting (default off): Set reporting mode to 2 (or reset to "
1941 #: build/C/man4/console_codes.4:358
1942 msgid "B<Linux Console Private CSI Sequences>"
1946 #: build/C/man4/console_codes.4:365
1948 "The following sequences are neither ECMA-48 nor native VT102. They are "
1949 "native to the Linux console driver. Colors are in SGR parameters: 0 = "
1950 "black, 1 = red, 2 = green, 3 = brown, 4 = blue, 5 = magenta, 6 = cyan, 7 = "
1955 #: build/C/man4/console_codes.4:367
1957 msgid "ESC [ 1 ; I<n> ]\tSet color I<n> as the underline color\n"
1961 #: build/C/man4/console_codes.4:368
1963 msgid "ESC [ 2 ; I<n> ]\tSet color I<n> as the dim color\n"
1967 #: build/C/man4/console_codes.4:369
1969 msgid "ESC [ 8 ] \tMake the current color pair the default attributes.\n"
1973 #: build/C/man4/console_codes.4:370
1975 msgid "ESC [ 9 ; I<n> ]\tSet screen blank timeout to I<n> minutes.\n"
1979 #: build/C/man4/console_codes.4:371
1981 msgid "ESC [ 10 ; I<n> ]\tSet bell frequency in Hz.\n"
1985 #: build/C/man4/console_codes.4:372
1987 msgid "ESC [ 11 ; I<n> ]\tSet bell duration in msec.\n"
1991 #: build/C/man4/console_codes.4:373
1993 msgid "ESC [ 12 ; I<n> ]\tBring specified console to the front.\n"
1997 #: build/C/man4/console_codes.4:374
1999 msgid "ESC [ 13 ] \tUnblank the screen.\n"
2003 #: build/C/man4/console_codes.4:375
2005 msgid "ESC [ 14 ; I<n> ] \tSet the VESA powerdown interval in minutes.\n"
2009 #: build/C/man4/console_codes.4:377
2011 msgid "Character sets"
2015 #: build/C/man4/console_codes.4:382
2017 "The kernel knows about 4 translations of bytes into console-screen symbols. "
2018 "The four tables are: a) Latin1 -E<gt> PC, b) VT100 graphics -E<gt> PC, c) PC "
2019 "-E<gt> PC, d) user-defined."
2023 #: build/C/man4/console_codes.4:388
2025 "There are two character sets, called G0 and G1, and one of them is the "
2026 "current character set. (Initially G0.) Typing B<^N> causes G1 to become "
2027 "current, B<^O> causes G0 to become current."
2031 #: build/C/man4/console_codes.4:396
2033 "These variables G0 and G1 point at a translation table, and can be changed "
2034 "by the user. Initially they point at tables a) and b), respectively. The "
2035 "sequences ESC ( B and ESC ( 0 and ESC ( U and ESC ( K cause G0 to point at "
2036 "translation table a), b), c) and d), respectively. The sequences ESC ) B "
2037 "and ESC ) 0 and ESC ) U and ESC ) K cause G1 to point at translation table "
2038 "a), b), c) and d), respectively."
2042 #: build/C/man4/console_codes.4:406
2044 "The sequence ESC c causes a terminal reset, which is what you want if the "
2045 "screen is all garbled. The oft-advised \"echo ^V^O\" will make only G0 "
2046 "current, but there is no guarantee that G0 points at table a). In some "
2047 "distributions there is a program B<reset>(1) that just does \"echo ^[c\". "
2048 "If your terminfo entry for the console is correct (and has an entry "
2049 "rs1=\\eEc), then \"tput reset\" will also work."
2053 #: build/C/man4/console_codes.4:414
2055 "The user-defined mapping table can be set using B<mapscrn>(8). The result "
2056 "of the mapping is that if a symbol c is printed, the symbol s = map[c] is "
2057 "sent to the video memory. The bitmap that corresponds to s is found in the "
2058 "character ROM, and can be changed using B<setfont>(8)."
2062 #: build/C/man4/console_codes.4:414
2064 msgid "Mouse tracking"
2068 #: build/C/man4/console_codes.4:426
2070 "The mouse tracking facility is intended to return B<xterm>(1)-compatible "
2071 "mouse status reports. Because the console driver has no way to know the "
2072 "device or type of the mouse, these reports are returned in the console input "
2073 "stream only when the virtual terminal driver receives a mouse update ioctl. "
2074 "These ioctls must be generated by a mouse-aware user-mode application such "
2075 "as the B<gpm>(8) daemon."
2079 #: build/C/man4/console_codes.4:432
2081 "The mouse tracking escape sequences generated by B<xterm>(1) encode numeric "
2082 "parameters in a single character as I<value>+040. For example, \\(aq!\\(aq "
2083 "is 1. The screen coordinate system is 1-based."
2087 #: build/C/man4/console_codes.4:442
2089 "The X10 compatibility mode sends an escape sequence on button press encoding "
2090 "the location and the mouse button pressed. It is enabled by sending ESC [ ? "
2091 "9 h and disabled with ESC [ ? 9 l. On button press, B<xterm>(1) sends ESC [ "
2092 "M I<bxy> (6 characters). Here I<b> is button-1, and I<x> and I<y> are the x "
2093 "and y coordinates of the mouse when the button was pressed. This is the "
2094 "same code the kernel also produces."
2098 #: build/C/man4/console_codes.4:457
2100 "Normal tracking mode (not implemented in Linux 2.0.24) sends an escape "
2101 "sequence on both button press and release. Modifier information is also "
2102 "sent. It is enabled by sending ESC [ ? 1000 h and disabled with ESC [ ? "
2103 "1000 l. On button press or release, B<xterm>(1) sends ESC [ M I<bxy>. The "
2104 "low two bits of I<b> encode button information: 0=MB1 pressed, 1=MB2 "
2105 "pressed, 2=MB3 pressed, 3=release. The upper bits encode what modifiers "
2106 "were down when the button was pressed and are added together: 4=Shift, "
2107 "8=Meta, 16=Control. Again I<x> and I<y> are the x and y coordinates of the "
2108 "mouse event. The upper left corner is (1,1)."
2112 #: build/C/man4/console_codes.4:457
2114 msgid "Comparisons with other terminals"
2118 #: build/C/man4/console_codes.4:464
2120 "Many different terminal types are described, like the Linux console, as "
2121 "being \"VT100-compatible\". Here we discuss differences between the Linux "
2122 "console and the two most important others, the DEC VT102 and B<xterm>(1)."
2126 #: build/C/man4/console_codes.4:466
2127 msgid "B<Control-character handling>"
2131 #: build/C/man4/console_codes.4:468
2132 msgid "The VT102 also recognized the following control characters:"
2136 #: build/C/man4/console_codes.4:470
2137 msgid "NUL (0x00) was ignored;"
2141 #: build/C/man4/console_codes.4:472
2142 msgid "ENQ (0x05) triggered an answerback message;"
2146 #: build/C/man4/console_codes.4:474
2147 msgid "DC1 (0x11, B<^Q>, XON) resumed transmission;"
2151 #: build/C/man4/console_codes.4:477
2153 "DC3 (0x13, B<^S>, XOFF) caused VT100 to ignore (and stop transmitting) all "
2154 "codes except XOFF and XON."
2158 #: build/C/man4/console_codes.4:479
2159 msgid "VT100-like DC1/DC3 processing may be enabled by the terminal driver."
2163 #: build/C/man4/console_codes.4:485
2165 "The B<xterm>(1) program (in VT100 mode) recognizes the control characters "
2166 "BEL, BS, HT, LF, VT, FF, CR, SO, SI, ESC."
2170 #: build/C/man4/console_codes.4:487
2171 msgid "B<Escape sequences>"
2175 #: build/C/man4/console_codes.4:489
2176 msgid "VT100 console sequences not implemented on the Linux console:"
2180 #: build/C/man4/console_codes.4:491
2182 msgid "ESC N\tSS2\tSingle shift 2. (Select G2 character set for the next\n"
2186 #: build/C/man4/console_codes.4:492 build/C/man4/console_codes.4:494
2188 msgid "\t\tcharacter only.)\n"
2192 #: build/C/man4/console_codes.4:493
2194 msgid "ESC O\tSS3\tSingle shift 3. (Select G3 character set for the next\n"
2198 #: build/C/man4/console_codes.4:495
2200 msgid "ESC P\tDCS\tDevice control string (ended by ESC \\e)\n"
2204 #: build/C/man4/console_codes.4:496
2206 msgid "ESC X\tSOS\tStart of string.\n"
2210 #: build/C/man4/console_codes.4:497
2212 msgid "ESC ^\tPM\tPrivacy message (ended by ESC \\e)\n"
2216 #: build/C/man4/console_codes.4:498
2218 msgid "ESC \\e\tST\tString terminator\n"
2222 #: build/C/man4/console_codes.4:499
2224 msgid "ESC * ...\t\tDesignate G2 character set\n"
2228 #: build/C/man4/console_codes.4:500
2230 msgid "ESC + ...\t\tDesignate G3 character set\n"
2234 #: build/C/man4/console_codes.4:513
2236 "The program B<xterm>(1) (in VT100 mode) recognizes ESC c, ESC # 8, ESC "
2237 "E<gt>, ESC =, ESC D, ESC E, ESC H, ESC M, ESC N, ESC O, ESC P ... ESC \\e, "
2238 "ESC Z (it answers ESC [ ? 1 ; 2 c, \"I am a VT100 with advanced video "
2239 "option\") and ESC ^ ... ESC \\e with the same meanings as indicated above. "
2240 "It accepts ESC (, ESC ), ESC *, ESC + followed by 0, A, B for the DEC "
2241 "special character and line drawing set, UK, and US-ASCII, respectively."
2245 #: build/C/man4/console_codes.4:517
2247 "The user can configure B<xterm>(1) to respond to VT220-specific control "
2248 "sequences, and it will identify itself as a VT52, VT100, and up depending on "
2249 "the way it is configured and initialized."
2253 #: build/C/man4/console_codes.4:522
2255 "It accepts ESC ] (OSC) for the setting of certain resources. In addition to "
2256 "the ECMA-48 string terminator (ST), B<xterm>(1) accepts a BEL to terminate "
2257 "an OSC string. These are a few of the OSC control sequences recognized by "
2262 #: build/C/man4/console_codes.4:524
2264 msgid "ESC ] 0 ; I<txt> ST\tSet icon name and window title to I<txt>.\n"
2268 #: build/C/man4/console_codes.4:525
2270 msgid "ESC ] 1 ; I<txt> ST\tSet icon name to I<txt>.\n"
2274 #: build/C/man4/console_codes.4:526
2276 msgid "ESC ] 2 ; I<txt> ST\tSet window title to I<txt>.\n"
2280 #: build/C/man4/console_codes.4:527
2282 msgid "ESC ] 4 ; I<num>; I<txt> ST\tSet ANSI color I<num> to I<txt>.\n"
2286 #: build/C/man4/console_codes.4:528
2288 msgid "ESC ] 10 ; I<txt> ST\tSet dynamic text color to I<txt>.\n"
2292 #: build/C/man4/console_codes.4:529
2294 msgid "ESC ] 4 6 ; I<name> ST\tChange log file to I<name> (normally disabled\n"
2298 #: build/C/man4/console_codes.4:530
2300 msgid "\tby a compile-time option)\n"
2304 #: build/C/man4/console_codes.4:531
2306 msgid "ESC ] 5 0 ; I<fn> ST\tSet font to I<fn>.\n"
2310 #: build/C/man4/console_codes.4:536
2312 "It recognizes the following with slightly modified meaning (saving more "
2313 "state, behaving closer to VT100/VT220):"
2317 #: build/C/man4/console_codes.4:538
2319 msgid "ESC 7 DECSC\tSave cursor\n"
2323 #: build/C/man4/console_codes.4:539
2325 msgid "ESC 8 DECRC\tRestore cursor\n"
2329 #: build/C/man4/console_codes.4:543
2330 msgid "It also recognizes"
2334 #: build/C/man4/console_codes.4:545
2336 msgid "ESC F\t\tCursor to lower left corner of screen (if enabled by\n"
2340 #: build/C/man4/console_codes.4:546
2342 msgid "\t\tB<xterm>(1)'s B<hpLowerleftBugCompat> resource)\n"
2346 #: build/C/man4/console_codes.4:547
2348 msgid "ESC l\t\tMemory lock (per HP terminals).\n"
2352 #: build/C/man4/console_codes.4:548
2354 msgid "\t\tLocks memory above the cursor.\n"
2358 #: build/C/man4/console_codes.4:549
2360 msgid "ESC m\t\tMemory unlock (per HP terminals).\n"
2364 #: build/C/man4/console_codes.4:550
2366 msgid "ESC n\tLS2\tInvoke the G2 character set.\n"
2370 #: build/C/man4/console_codes.4:551
2372 msgid "ESC o\tLS3\tInvoke the G3 character set.\n"
2376 #: build/C/man4/console_codes.4:552
2378 msgid "ESC |\tLS3R\tInvoke the G3 character set as GR.\n"
2382 #: build/C/man4/console_codes.4:553
2384 msgid "ESC }\tLS2R\tInvoke the G2 character set as GR.\n"
2388 #: build/C/man4/console_codes.4:554
2390 msgid "ESC ~\tLS1R\tInvoke the G1 character set as GR.\n"
2394 #: build/C/man4/console_codes.4:560
2396 "It also recognizes ESC % and provides a more complete UTF-8 implementation "
2397 "than Linux console."
2401 #: build/C/man4/console_codes.4:562
2402 msgid "B<CSI Sequences>"
2406 #: build/C/man4/console_codes.4:576
2408 "Old versions of B<xterm>(1), for example, from X11R5, interpret the blink "
2409 "SGR as a bold SGR. Later versions which implemented ANSI colors, for "
2410 "example, XFree86 3.1.2A in 1995, improved this by allowing the blink "
2411 "attribute to be displayed as a color. Modern versions of xterm implement "
2412 "blink SGR as blinking text and still allow colored text as an alternate "
2413 "rendering of SGRs. Stock X11R6 versions did not recognize the color-setting "
2414 "SGRs until the X11R6.8 release, which incorporated XFree86 xterm. All "
2415 "ECMA-48 CSI sequences recognized by Linux are also recognized by I<xterm>, "
2416 "however B<xterm>(1) implements several ECMA-48 and DEC control sequences not "
2417 "recognized by Linux."
2421 #: build/C/man4/console_codes.4:590
2423 "The B<xterm>(1) program recognizes all of the DEC Private Mode sequences "
2424 "listed above, but none of the Linux private-mode sequences. For discussion "
2425 "of B<xterm>(1)'s own private-mode sequences, refer to the I<Xterm Control "
2426 "Sequences> document by Edward Moy, Stephen Gildea, and Thomas E. Dickey "
2427 "available with the X distribution. That document, though terse, is much "
2428 "longer than this manual page. For a chronological overview,"
2432 #: build/C/man4/console_codes.4:594
2433 msgid "E<.UR http://invisible-island.net\\:/xterm\\:/xterm.log.html> E<.UE>"
2437 #: build/C/man4/console_codes.4:597
2438 msgid "details changes to xterm."
2442 #: build/C/man4/console_codes.4:599
2443 msgid "The I<vttest> program"
2447 #: build/C/man4/console_codes.4:603
2448 msgid "E<.UR http://invisible-island.net\\:/vttest/> E<.UE>"
2452 #: build/C/man4/console_codes.4:608
2454 "demonstrates many of these control sequences. The B<xterm>(1) source "
2455 "distribution also contains sample scripts which exercise other features."
2459 #: build/C/man4/console_codes.4:608 build/C/man4/console_ioctl.4:824 build/C/man5/core.5:311 build/C/man4/cpuid.4:62 build/C/man4/fd.4:197 build/C/man7/fifo.7:54 build/C/man4/initrd.4:429 build/C/man3/makedev.3:71 build/C/man2/mknod.2:253 build/C/man4/msr.4:47 build/C/man4/null.4:61 build/C/man4/st.4:891 build/C/man3/stdarg.3:248 build/C/man2/syslog.2:301 build/C/man3/syslog.3:296 build/C/man7/uri.7:592
2465 #: build/C/man4/console_codes.4:611
2466 msgid "ESC 8 (DECRC) is not able to restore the character set changed with ESC %."
2470 #: build/C/man4/console_codes.4:611 build/C/man4/sk98lin.4:592 build/C/man3/stdarg.3:284 build/C/man7/uri.7:673
2476 #: build/C/man4/console_codes.4:614
2477 msgid "In 2.0.23, CSI is broken, and NUL is not ignored inside escape sequences."
2481 #: build/C/man4/console_codes.4:623
2483 "Some older kernel versions (after 2.0) interpret 8-bit control sequences. "
2484 "These \"C1 controls\" use codes between 128 and 159 to replace ESC [, ESC ] "
2485 "and similar two-byte control sequence initiators. There are fragments of "
2486 "that in modern kernels (either overlooked or broken by changes to support "
2487 "UTF-8), but the implementation is incomplete and should be regarded as "
2492 #: build/C/man4/console_codes.4:638
2494 "Linux \"private mode\" sequences do not follow the rules in ECMA-48 for "
2495 "private mode control sequences. In particular, those ending with ] do not "
2496 "use a standard terminating character. The OSC (set palette) sequence is a "
2497 "greater problem, since B<xterm>(1) may interpret this as a control sequence "
2498 "which requires a string terminator (ST). Unlike the B<setterm>(1) sequences "
2499 "which will be ignored (since they are invalid control sequences), the "
2500 "palette sequence will make B<xterm>(1) appear to hang (though pressing the "
2501 "return-key will fix that). To accommodate applications which have been "
2502 "hardcoded to use Linux control sequences, set the B<xterm>(1) resource "
2503 "B<brokenLinuxOSC> to true."
2507 #: build/C/man4/console_codes.4:642
2509 "An older version of this document implied that Linux recognizes the ECMA-48 "
2510 "control sequence for invisible text. It is ignored."
2514 #: build/C/man4/console_codes.4:646
2515 msgid "B<console>(4), B<console_ioctl>(4), B<charsets>(7)"
2519 #: build/C/man4/console_ioctl.4:40
2521 msgid "CONSOLE_IOCTL"
2525 #: build/C/man4/console_ioctl.4:40
2531 #: build/C/man4/console_ioctl.4:43
2532 msgid "console_ioctl - ioctls for console terminal and virtual consoles"
2536 #: build/C/man4/console_ioctl.4:49
2538 "The following Linux-specific B<ioctl>(2) requests are supported. Each "
2539 "requires a third argument, assumed here to be I<argp>."
2543 #: build/C/man4/console_ioctl.4:49
2549 #: build/C/man4/console_ioctl.4:59
2551 "Get state of LEDs. I<argp> points to a I<char>. The lower three bits of "
2552 "I<*argp> are set to the state of the LEDs, as follows:"
2556 #: build/C/man4/console_ioctl.4:61
2558 msgid "LED_CAP \t0x04\tcaps lock led\n"
2562 #: build/C/man4/console_ioctl.4:62
2564 msgid "LEC_NUM \t0x02\tnum lock led\n"
2568 #: build/C/man4/console_ioctl.4:63
2570 msgid "LED_SCR \t0x01\tscroll lock led\n"
2574 #: build/C/man4/console_ioctl.4:65
2580 #: build/C/man4/console_ioctl.4:73
2582 "Set the LEDs. The LEDs are set to correspond to the lower three bits of "
2583 "I<argp>. However, if a higher order bit is set, the LEDs revert to normal: "
2584 "displaying the state of the keyboard functions of caps lock, num lock, and "
2589 #: build/C/man4/console_ioctl.4:80
2591 "Before 1.1.54, the LEDs just reflected the state of the corresponding "
2592 "keyboard flags, and KDGETLED/KDSETLED would also change the keyboard flags. "
2593 "Since 1.1.54 the LEDs can be made to display arbitrary information, but by "
2594 "default they display the keyboard flags. The following two ioctls are used "
2595 "to access the keyboard flags."
2599 #: build/C/man4/console_ioctl.4:80
2605 #: build/C/man4/console_ioctl.4:89
2607 "Get keyboard flags CapsLock, NumLock, ScrollLock (not lights). I<argp> "
2608 "points to a char which is set to the flag state. The low order three bits "
2609 "(mask 0x7) get the current flag state, and the low order bits of the next "
2610 "nibble (mask 0x70) get the default flag state. (Since 1.1.54.)"
2614 #: build/C/man4/console_ioctl.4:89
2620 #: build/C/man4/console_ioctl.4:98
2622 "Set keyboard flags CapsLock, NumLock, ScrollLock (not lights). I<argp> has "
2623 "the desired flag state. The low order three bits (mask 0x7) have the flag "
2624 "state, and the low order bits of the next nibble (mask 0x70) have the "
2625 "default flag state. (Since 1.1.54.)"
2629 #: build/C/man4/console_ioctl.4:98
2631 msgid "B<KDGKBTYPE>"
2635 #: build/C/man4/console_ioctl.4:102
2636 msgid "Get keyboard type. This returns the value KB_101, defined as 0x02."
2640 #: build/C/man4/console_ioctl.4:102
2646 #: build/C/man4/console_ioctl.4:107
2647 msgid "Add I/O port as valid. Equivalent to I<ioperm(arg,1,1)>."
2651 #: build/C/man4/console_ioctl.4:107
2657 #: build/C/man4/console_ioctl.4:112
2658 msgid "Delete I/O port as valid. Equivalent to I<ioperm(arg,1,0)>."
2662 #: build/C/man4/console_ioctl.4:112
2668 #: build/C/man4/console_ioctl.4:117
2670 "Enable I/O to video board. Equivalent to I<ioperm(0x3b4, 0x3df-0x3b4+1, "
2675 #: build/C/man4/console_ioctl.4:117
2677 msgid "B<KDDISABIO>"
2681 #: build/C/man4/console_ioctl.4:122
2683 "Disable I/O to video board. Equivalent to I<ioperm(0x3b4, 0x3df-0x3b4+1, "
2688 #: build/C/man4/console_ioctl.4:122
2690 msgid "B<KDSETMODE>"
2694 #: build/C/man4/console_ioctl.4:127
2695 msgid "Set text/graphics mode. I<argp> is one of these:"
2699 #: build/C/man4/console_ioctl.4:130
2701 msgid "KD_TEXT\t0x00\n"
2705 #: build/C/man4/console_ioctl.4:131
2707 msgid "KD_GRAPHICS\t0x01\n"
2711 #: build/C/man4/console_ioctl.4:133
2713 msgid "B<KDGETMODE>"
2717 #: build/C/man4/console_ioctl.4:141
2719 "Get text/graphics mode. I<argp> points to a I<long> which is set to one of "
2724 #: build/C/man4/console_ioctl.4:141
2730 #: build/C/man4/console_ioctl.4:155
2732 "Generate tone of specified length. The lower 16 bits of I<argp> specify the "
2733 "period in clock cycles, and the upper 16 bits give the duration in msec. If "
2734 "the duration is zero, the sound is turned off. Control returns "
2735 "immediately. For example, I<argp> = (125E<lt>E<lt>16) + 0x637 would specify "
2736 "the beep normally associated with a ctrl-G. (Thus since 0.99pl1; broken in "
2741 #: build/C/man4/console_ioctl.4:155
2743 msgid "B<KIOCSOUND>"
2747 #: build/C/man4/console_ioctl.4:167
2749 "Start or stop sound generation. The lower 16 bits of I<argp> specify the "
2750 "period in clock cycles (that is, I<argp> = 1193180/frequency). I<argp> = 0 "
2751 "turns sound off. In either case, control returns immediately."
2755 #: build/C/man4/console_ioctl.4:167
2761 #: build/C/man4/console_ioctl.4:174
2763 "Get the current default color map from kernel. I<argp> points to a 48-byte "
2764 "array. (Since 1.3.3.)"
2768 #: build/C/man4/console_ioctl.4:174
2774 #: build/C/man4/console_ioctl.4:187
2776 "Change the default text-mode color map. I<argp> points to a 48-byte array "
2777 "which contains, in order, the Red, Green, and Blue values for the 16 "
2778 "available screen colors: 0 is off, and 255 is full intensity. The default "
2779 "colors are, in order: black, dark red, dark green, brown, dark blue, dark "
2780 "purple, dark cyan, light grey, dark grey, bright red, bright green, yellow, "
2781 "bright blue, bright purple, bright cyan and white. (Since 1.3.3.)"
2785 #: build/C/man4/console_ioctl.4:187
2791 #: build/C/man4/console_ioctl.4:197
2793 "Gets 256-character screen font in expanded form. I<argp> points to an 8192 "
2794 "byte array. Fails with error code B<EINVAL> if the currently loaded font is "
2795 "a 512-character font, or if the console is not in text mode."
2799 #: build/C/man4/console_ioctl.4:197
2801 msgid "B<GIO_FONTX>"
2805 #: build/C/man4/console_ioctl.4:225
2807 "Gets screen font and associated information. I<argp> points to a I<struct "
2808 "consolefontdesc> (see B<PIO_FONTX>). On call, the I<charcount> field should "
2809 "be set to the maximum number of characters that would fit in the buffer "
2810 "pointed to by I<chardata>. On return, the I<charcount> and I<charheight> "
2811 "are filled with the respective data for the currently loaded font, and the "
2812 "I<chardata> array contains the font data if the initial value of "
2813 "I<charcount> indicated enough space was available; otherwise the buffer is "
2814 "untouched and I<errno> is set to B<ENOMEM>. (Since 1.3.1.)"
2818 #: build/C/man4/console_ioctl.4:225
2824 #: build/C/man4/console_ioctl.4:240
2826 "Sets 256-character screen font. Load font into the EGA/VGA character "
2827 "generator. I<argp> points to a 8192 byte map, with 32 bytes per character. "
2828 "Only the first I<N> of them are used for an 8xI<N> font (0 E<lt> I<N> E<lt>= "
2829 "32). This call also invalidates the Unicode mapping."
2833 #: build/C/man4/console_ioctl.4:240
2835 msgid "B<PIO_FONTX>"
2839 #: build/C/man4/console_ioctl.4:245
2840 msgid "Sets screen font and associated rendering information. I<argp> points to a"
2844 #: build/C/man4/console_ioctl.4:256
2847 "struct consolefontdesc {\n"
2848 " unsigned short charcount; /* characters in font\n"
2849 " (256 or 512) */\n"
2850 " unsigned short charheight; /* scan lines per\n"
2851 " character (1-32) */\n"
2852 " char *chardata; /* font data in\n"
2853 " expanded form */\n"
2858 #: build/C/man4/console_ioctl.4:264
2860 "If necessary, the screen will be appropriately resized, and B<SIGWINCH> sent "
2861 "to the appropriate processes. This call also invalidates the Unicode "
2862 "mapping. (Since 1.3.1.)"
2866 #: build/C/man4/console_ioctl.4:264
2868 msgid "B<PIO_FONTRESET>"
2872 #: build/C/man4/console_ioctl.4:272
2874 "Resets the screen font, size and Unicode mapping to the bootup defaults. "
2875 "I<argp> is unused, but should be set to NULL to ensure compatibility with "
2876 "future versions of Linux. (Since 1.3.28.)"
2880 #: build/C/man4/console_ioctl.4:272
2882 msgid "B<GIO_SCRNMAP>"
2886 #: build/C/man4/console_ioctl.4:281
2888 "Get screen mapping from kernel. I<argp> points to an area of size E_TABSZ, "
2889 "which is loaded with the font positions used to display each character. "
2890 "This call is likely to return useless information if the currently loaded "
2891 "font is more than 256 characters."
2895 #: build/C/man4/console_ioctl.4:281
2897 msgid "B<GIO_UNISCRNMAP>"
2901 #: build/C/man4/console_ioctl.4:293
2903 "Get full Unicode screen mapping from kernel. I<argp> points to an area of "
2904 "size I<E_TABSZ*sizeof(unsigned short)>, which is loaded with the Unicodes "
2905 "each character represent. A special set of Unicodes, starting at U+F000, "
2906 "are used to represent \"direct to font\" mappings. (Since 1.3.1.)"
2910 #: build/C/man4/console_ioctl.4:293
2912 msgid "B<PIO_SCRNMAP>"
2916 #: build/C/man4/console_ioctl.4:300
2918 "Loads the \"user definable\" (fourth) table in the kernel which maps bytes "
2919 "into console screen symbols. I<argp> points to an area of size E_TABSZ."
2923 #: build/C/man4/console_ioctl.4:300
2925 msgid "B<PIO_UNISCRNMAP>"
2929 #: build/C/man4/console_ioctl.4:308
2931 "Loads the \"user definable\" (fourth) table in the kernel which maps bytes "
2932 "into Unicodes, which are then translated into screen symbols according to "
2933 "the currently loaded Unicode-to-font map. Special Unicodes starting at "
2934 "U+F000 can be used to map directly to the font symbols. (Since 1.3.1.)"
2938 #: build/C/man4/console_ioctl.4:308
2940 msgid "B<GIO_UNIMAP>"
2944 #: build/C/man4/console_ioctl.4:313
2945 msgid "Get Unicode-to-font mapping from kernel. I<argp> points to a"
2949 #: build/C/man4/console_ioctl.4:320
2952 "struct unimapdesc {\n"
2953 " unsigned short entry_ct;\n"
2954 " struct unipair *entries;\n"
2959 #: build/C/man4/console_ioctl.4:326
2960 msgid "where I<entries> points to an array of"
2964 #: build/C/man4/console_ioctl.4:333
2967 "struct unipair {\n"
2968 " unsigned short unicode;\n"
2969 " unsigned short fontpos;\n"
2974 #: build/C/man4/console_ioctl.4:337 build/C/man4/console_ioctl.4:361
2975 msgid "(Since 1.1.92.)"
2979 #: build/C/man4/console_ioctl.4:337
2981 msgid "B<PIO_UNIMAP>"
2985 #: build/C/man4/console_ioctl.4:344
2987 "Put unicode-to-font mapping in kernel. I<argp> points to a I<struct "
2988 "unimapdesc>. (Since 1.1.92)"
2992 #: build/C/man4/console_ioctl.4:344
2994 msgid "B<PIO_UNIMAPCLR>"
2998 #: build/C/man4/console_ioctl.4:349
2999 msgid "Clear table, possibly advise hash algorithm. I<argp> points to a"
3003 #: build/C/man4/console_ioctl.4:357
3006 "struct unimapinit {\n"
3007 " unsigned short advised_hashsize; /* 0 if no opinion */\n"
3008 " unsigned short advised_hashstep; /* 0 if no opinion */\n"
3009 " unsigned short advised_hashlevel; /* 0 if no opinion */\n"
3014 #: build/C/man4/console_ioctl.4:361
3016 msgid "B<KDGKBMODE>"
3020 #: build/C/man4/console_ioctl.4:369
3022 "Gets current keyboard mode. I<argp> points to a I<long> which is set to one "
3027 #: build/C/man4/console_ioctl.4:372
3029 msgid "K_RAW\t0x00\n"
3033 #: build/C/man4/console_ioctl.4:373
3035 msgid "K_XLATE\t0x01\n"
3039 #: build/C/man4/console_ioctl.4:374
3041 msgid "K_MEDIUMRAW\t0x02\n"
3045 #: build/C/man4/console_ioctl.4:375
3047 msgid "K_UNICODE\t0x03\n"
3051 #: build/C/man4/console_ioctl.4:377
3053 msgid "B<KDSKBMODE>"
3057 #: build/C/man4/console_ioctl.4:384
3059 "Sets current keyboard mode. I<argp> is a I<long> equal to one of the above "
3064 #: build/C/man4/console_ioctl.4:384
3066 msgid "B<KDGKBMETA>"
3070 #: build/C/man4/console_ioctl.4:392
3072 "Gets meta key handling mode. I<argp> points to a I<long> which is set to "
3077 #: build/C/man4/console_ioctl.4:395
3079 msgid "K_METABIT\t0x03\tset high order bit\n"
3083 #: build/C/man4/console_ioctl.4:396
3085 msgid "K_ESCPREFIX\t0x04\tescape prefix\n"
3089 #: build/C/man4/console_ioctl.4:398
3091 msgid "B<KDSKBMETA>"
3095 #: build/C/man4/console_ioctl.4:405
3097 "Sets meta key handling mode. I<argp> is a I<long> equal to one of the above "
3102 #: build/C/man4/console_ioctl.4:405
3108 #: build/C/man4/console_ioctl.4:410
3110 "Gets one entry in key translation table (keycode to action code). I<argp> "
3115 #: build/C/man4/console_ioctl.4:418
3118 "struct kbentry {\n"
3119 " unsigned char kb_table;\n"
3120 " unsigned char kb_index;\n"
3121 " unsigned short kb_value;\n"
3126 #: build/C/man4/console_ioctl.4:437
3128 "with the first two members filled in: I<kb_table> selects the key table (0 "
3129 "E<lt>= I<kb_table> E<lt> MAX_NR_KEYMAPS), and I<kb_index> is the keycode (0 "
3130 "E<lt>= I<kb_index> E<lt> NR_KEYS). I<kb_value> is set to the corresponding "
3131 "action code, or K_HOLE if there is no such key, or K_NOSUCHMAP if "
3132 "I<kb_table> is invalid."
3136 #: build/C/man4/console_ioctl.4:437
3142 #: build/C/man4/console_ioctl.4:443
3143 msgid "Sets one entry in translation table. I<argp> points to a I<struct kbentry>."
3147 #: build/C/man4/console_ioctl.4:443
3149 msgid "B<KDGKBSENT>"
3153 #: build/C/man4/console_ioctl.4:448
3154 msgid "Gets one function key string. I<argp> points to a"
3158 #: build/C/man4/console_ioctl.4:455
3161 "struct kbsentry {\n"
3162 " unsigned char kb_func;\n"
3163 " unsigned char kb_string[512];\n"
3168 #: build/C/man4/console_ioctl.4:463
3170 "I<kb_string> is set to the (null-terminated) string corresponding to the "
3171 "I<kb_func>th function key action code."
3175 #: build/C/man4/console_ioctl.4:463
3177 msgid "B<KDSKBSENT>"
3181 #: build/C/man4/console_ioctl.4:469
3182 msgid "Sets one function key string entry. I<argp> points to a I<struct kbsentry>."
3186 #: build/C/man4/console_ioctl.4:469
3188 msgid "B<KDGKBDIACR>"
3192 #: build/C/man4/console_ioctl.4:474
3193 msgid "Read kernel accent table. I<argp> points to a"
3197 #: build/C/man4/console_ioctl.4:481
3200 "struct kbdiacrs {\n"
3201 " unsigned int kb_cnt;\n"
3202 " struct kbdiacr kbdiacr[256];\n"
3207 #: build/C/man4/console_ioctl.4:488
3208 msgid "where I<kb_cnt> is the number of entries in the array, each of which is a"
3212 #: build/C/man4/console_ioctl.4:496
3215 "struct kbdiacr {\n"
3216 " unsigned char diacr;\n"
3217 " unsigned char base;\n"
3218 " unsigned char result;\n"
3223 #: build/C/man4/console_ioctl.4:498
3225 msgid "B<KDGETKEYCODE>"
3229 #: build/C/man4/console_ioctl.4:503
3230 msgid "Read kernel keycode table entry (scan code to keycode). I<argp> points to a"
3234 #: build/C/man4/console_ioctl.4:510
3237 "struct kbkeycode {\n"
3238 " unsigned int scancode;\n"
3239 " unsigned int keycode;\n"
3244 #: build/C/man4/console_ioctl.4:524
3246 "I<keycode> is set to correspond to the given I<scancode>. (89 E<lt>= "
3247 "I<scancode> E<lt>= 255 only. For 1 E<lt>= I<scancode> E<lt>= 88, "
3248 "I<keycode>==I<scancode>.) (Since 1.1.63.)"
3252 #: build/C/man4/console_ioctl.4:524
3254 msgid "B<KDSETKEYCODE>"
3258 #: build/C/man4/console_ioctl.4:531
3260 "Write kernel keycode table entry. I<argp> points to a I<struct kbkeycode>. "
3265 #: build/C/man4/console_ioctl.4:531
3267 msgid "B<KDSIGACCEPT>"
3271 #: build/C/man4/console_ioctl.4:543
3273 "The calling process indicates its willingness to accept the signal I<argp> "
3274 "when it is generated by pressing an appropriate key combination. (1 E<lt>= "
3275 "I<argp> E<lt>= NSIG). (See I<spawn_console>() in "
3276 "I<linux/drivers/char/keyboard.c>.)"
3280 #: build/C/man4/console_ioctl.4:543
3282 msgid "B<VT_OPENQRY>"
3286 #: build/C/man4/console_ioctl.4:553
3288 "Returns the first available (non-opened) console. I<argp> points to an "
3289 "I<int> which is set to the number of the vt (1 E<lt>= I<*argp> E<lt>= "
3294 #: build/C/man4/console_ioctl.4:553
3296 msgid "B<VT_GETMODE>"
3300 #: build/C/man4/console_ioctl.4:558
3301 msgid "Get mode of active vt. I<argp> points to a"
3305 #: build/C/man4/console_ioctl.4:568
3308 "struct vt_mode {\n"
3309 " char mode; /* vt mode */\n"
3310 " char waitv; /* if set, hang on writes if not active */\n"
3311 " short relsig; /* signal to raise on release req */\n"
3312 " short acqsig; /* signal to raise on acquisition */\n"
3313 " short frsig; /* unused (set to 0) */\n"
3318 #: build/C/man4/console_ioctl.4:574
3320 "which is set to the mode of the active vt. I<mode> is set to one of these "
3325 #: build/C/man4/console_ioctl.4:577
3327 msgid "VT_AUTO\tauto vt switching\n"
3331 #: build/C/man4/console_ioctl.4:578
3333 msgid "VT_PROCESS\tprocess controls switching\n"
3337 #: build/C/man4/console_ioctl.4:579
3339 msgid "VT_ACKACQ\tacknowledge switch\n"
3343 #: build/C/man4/console_ioctl.4:581
3345 msgid "B<VT_SETMODE>"
3349 #: build/C/man4/console_ioctl.4:587
3350 msgid "Set mode of active vt. I<argp> points to a I<struct vt_mode>."
3354 #: build/C/man4/console_ioctl.4:587
3356 msgid "B<VT_GETSTATE>"
3360 #: build/C/man4/console_ioctl.4:592
3361 msgid "Get global vt state info. I<argp> points to a"
3365 #: build/C/man4/console_ioctl.4:600
3368 "struct vt_stat {\n"
3369 " unsigned short v_active; /* active vt */\n"
3370 " unsigned short v_signal; /* signal to send */\n"
3371 " unsigned short v_state; /* vt bit mask */\n"
3376 #: build/C/man4/console_ioctl.4:607
3378 "For each vt in use, the corresponding bit in the I<v_state> member is set. "
3379 "(Kernels 1.0 through 1.1.92.)"
3383 #: build/C/man4/console_ioctl.4:607
3385 msgid "B<VT_RELDISP>"
3389 #: build/C/man4/console_ioctl.4:610
3390 msgid "Release a display."
3394 #: build/C/man4/console_ioctl.4:610
3396 msgid "B<VT_ACTIVATE>"
3400 #: build/C/man4/console_ioctl.4:617
3401 msgid "Switch to vt I<argp> (1 E<lt>= I<argp> E<lt>= MAX_NR_CONSOLES)."
3405 #: build/C/man4/console_ioctl.4:617
3407 msgid "B<VT_WAITACTIVE>"
3411 #: build/C/man4/console_ioctl.4:622
3412 msgid "Wait until vt I<argp> has been activated."
3416 #: build/C/man4/console_ioctl.4:622
3418 msgid "B<VT_DISALLOCATE>"
3422 #: build/C/man4/console_ioctl.4:627
3423 msgid "Deallocate the memory associated with vt I<argp>. (Since 1.1.54.)"
3427 #: build/C/man4/console_ioctl.4:627
3429 msgid "B<VT_RESIZE>"
3433 #: build/C/man4/console_ioctl.4:632
3434 msgid "Set the kernel's idea of screensize. I<argp> points to a"
3438 #: build/C/man4/console_ioctl.4:640
3441 "struct vt_sizes {\n"
3442 " unsigned short v_rows; /* # rows */\n"
3443 " unsigned short v_cols; /* # columns */\n"
3444 " unsigned short v_scrollsize; /* no longer used */\n"
3449 #: build/C/man4/console_ioctl.4:647
3451 "Note that this does not change the videomode. See B<resizecons>(8). (Since "
3456 #: build/C/man4/console_ioctl.4:647
3458 msgid "B<VT_RESIZEX>"
3462 #: build/C/man4/console_ioctl.4:652
3463 msgid "Set the kernel's idea of various screen parameters. I<argp> points to a"
3467 #: build/C/man4/console_ioctl.4:667
3470 "struct vt_consize {\n"
3471 " unsigned short v_rows; /* number of rows */\n"
3472 " unsigned short v_cols; /* number of columns */\n"
3473 " unsigned short v_vlin; /* number of pixel rows\n"
3475 " unsigned short v_clin; /* number of pixel rows\n"
3476 " per character */\n"
3477 " unsigned short v_vcol; /* number of pixel columns\n"
3479 " unsigned short v_ccol; /* number of pixel columns\n"
3480 " per character */\n"
3485 #: build/C/man4/console_ioctl.4:676
3487 "Any parameter may be set to zero, indicating \"no change\", but if multiple "
3488 "parameters are set, they must be self-consistent. Note that this does not "
3489 "change the videomode. See B<resizecons>(8). (Since 1.3.3.)"
3493 #: build/C/man4/console_ioctl.4:683
3495 "The action of the following ioctls depends on the first byte in the struct "
3496 "pointed to by I<argp>, referred to here as the I<subcode>. These are legal "
3497 "only for the superuser or the owner of the current terminal."
3501 #: build/C/man4/console_ioctl.4:683
3503 msgid "B<TIOCLINUX, subcode=0>"
3507 #: build/C/man4/console_ioctl.4:691
3509 "Dump the screen. Disappeared in 1.1.92. (With kernel 1.1.92 or later, read "
3510 "from I</dev/vcsN> or I</dev/vcsaN> instead.)"
3514 #: build/C/man4/console_ioctl.4:691
3516 msgid "B<TIOCLINUX, subcode=1>"
3520 #: build/C/man4/console_ioctl.4:695
3521 msgid "Get task information. Disappeared in 1.1.92."
3525 #: build/C/man4/console_ioctl.4:695
3527 msgid "B<TIOCLINUX, subcode=2>"
3531 #: build/C/man4/console_ioctl.4:700
3532 msgid "Set selection. I<argp> points to a"
3536 #: build/C/man4/console_ioctl.4:708
3541 " short xs, ys, xe, ye;\n"
3542 " short sel_mode;\n"
3547 #: build/C/man4/console_ioctl.4:728
3549 "I<xs> and I<ys> are the starting column and row. I<xe> and I<ye> are the "
3550 "ending column and row. (Upper left corner is row=column=1.) I<sel_mode> is "
3551 "0 for character-by-character selection, 1 for word-by-word selection, or 2 "
3552 "for line-by-line selection. The indicated screen characters are highlighted "
3553 "and saved in the static array sel_buffer in I<devices/char/console.c>."
3557 #: build/C/man4/console_ioctl.4:728
3559 msgid "B<TIOCLINUX, subcode=3>"
3563 #: build/C/man4/console_ioctl.4:734
3565 "Paste selection. The characters in the selection buffer are written to "
3570 #: build/C/man4/console_ioctl.4:734
3572 msgid "B<TIOCLINUX, subcode=4>"
3576 #: build/C/man4/console_ioctl.4:737
3577 msgid "Unblank the screen."
3581 #: build/C/man4/console_ioctl.4:737
3583 msgid "B<TIOCLINUX, subcode=5>"
3587 #: build/C/man4/console_ioctl.4:742
3589 "Sets contents of a 256-bit look up table defining characters in a \"word\", "
3590 "for word-by-word selection. (Since 1.1.32.)"
3594 #: build/C/man4/console_ioctl.4:742
3596 msgid "B<TIOCLINUX, subcode=6>"
3600 #: build/C/man4/console_ioctl.4:749
3602 "I<argp> points to a char which is set to the value of the kernel variable "
3603 "I<shift_state>. (Since 1.1.32.)"
3607 #: build/C/man4/console_ioctl.4:749
3609 msgid "B<TIOCLINUX, subcode=7>"
3613 #: build/C/man4/console_ioctl.4:756
3615 "I<argp> points to a char which is set to the value of the kernel variable "
3616 "I<report_mouse>. (Since 1.1.33.)"
3620 #: build/C/man4/console_ioctl.4:756
3622 msgid "B<TIOCLINUX, subcode=8>"
3626 #: build/C/man4/console_ioctl.4:764
3628 "Dump screen width and height, cursor position, and all the "
3629 "character-attribute pairs. (Kernels 1.1.67 through 1.1.91 only. With "
3630 "kernel 1.1.92 or later, read from I</dev/vcsa*> instead.)"
3634 #: build/C/man4/console_ioctl.4:764
3636 msgid "B<TIOCLINUX, subcode=9>"
3640 #: build/C/man4/console_ioctl.4:772
3642 "Restore screen width and height, cursor position, and all the "
3643 "character-attribute pairs. (Kernels 1.1.67 through 1.1.91 only. With "
3644 "kernel 1.1.92 or later, write to I</dev/vcsa*> instead.)"
3648 #: build/C/man4/console_ioctl.4:772
3650 msgid "B<TIOCLINUX, subcode=10>"
3654 #: build/C/man4/console_ioctl.4:780
3656 "Handles the Power Saving feature of the new generation of monitors. VESA "
3657 "screen blanking mode is set to I<argp[1]>, which governs what screen "
3662 #: build/C/man4/console_ioctl.4:781
3668 #: build/C/man4/console_ioctl.4:783
3669 msgid "Screen blanking is disabled."
3673 #: build/C/man4/console_ioctl.4:783
3679 #: build/C/man4/console_ioctl.4:790
3681 "The current video adapter register settings are saved, then the controller "
3682 "is programmed to turn off the vertical synchronization pulses. This puts "
3683 "the monitor into \"standby\" mode. If your monitor has an Off_Mode timer, "
3684 "then it will eventually power down by itself."
3688 #: build/C/man4/console_ioctl.4:790
3694 #: build/C/man4/console_ioctl.4:800
3696 "The current settings are saved, then both the vertical and horizontal "
3697 "synchronization pulses are turned off. This puts the monitor into \"off\" "
3698 "mode. If your monitor has no Off_Mode timer, or if you want your monitor to "
3699 "power down immediately when the blank_timer times out, then you choose this "
3700 "option. (I<Caution:> Powering down frequently will damage the monitor.) "
3705 #: build/C/man4/console_ioctl.4:801 build/C/man3/mkfifo.3:120 build/C/man2/mknod.2:149 build/C/man3/setlogmask.3:69 build/C/man4/st.4:827 build/C/man2/syslog.2:244
3707 msgid "RETURN VALUE"
3711 #: build/C/man4/console_ioctl.4:806
3712 msgid "On success, 0 is returned. On error, -1 is returned, and I<errno> is set."
3716 #: build/C/man4/console_ioctl.4:806 build/C/man3/mkfifo.3:128 build/C/man2/mknod.2:156 build/C/man3/setlogmask.3:71 build/C/man2/syslog.2:260
3722 #: build/C/man4/console_ioctl.4:809
3723 msgid "I<errno> may take on these values:"
3727 #: build/C/man4/console_ioctl.4:809 build/C/man3/mkfifo.3:168 build/C/man2/mknod.2:230
3733 #: build/C/man4/console_ioctl.4:812
3734 msgid "The file descriptor is invalid."
3738 #: build/C/man4/console_ioctl.4:812
3744 #: build/C/man4/console_ioctl.4:816
3746 "The file descriptor is not associated with a character special device, or "
3747 "the specified request does not apply to it."
3751 #: build/C/man4/console_ioctl.4:816 build/C/man2/mknod.2:179 build/C/man4/st.4:842 build/C/man2/syslog.2:261
3757 #: build/C/man4/console_ioctl.4:821
3758 msgid "The file descriptor or I<argp> is invalid."
3762 #: build/C/man4/console_ioctl.4:821 build/C/man2/mknod.2:209 build/C/man2/syslog.2:285
3768 #: build/C/man4/console_ioctl.4:824
3769 msgid "Insufficient permission."
3773 #: build/C/man4/console_ioctl.4:835
3775 "B<Warning>: Do not regard this man page as documentation of the Linux "
3776 "console ioctls. This is provided for the curious only, as an alternative to "
3777 "reading the source. Ioctl's are undocumented Linux internals, liable to be "
3778 "changed without warning. (And indeed, this page more or less describes the "
3779 "situation as of kernel version 1.1.94; there are many minor and not-so-minor "
3780 "differences with earlier versions.)"
3784 #: build/C/man4/console_ioctl.4:840
3786 "Very often, ioctls are introduced for communication between the kernel and "
3787 "one particular well-known program (fdisk, hdparm, setserial, tunelp, "
3788 "loadkeys, selection, setfont, etc.), and their behavior will be changed when "
3789 "required by this particular program."
3793 #: build/C/man4/console_ioctl.4:844
3795 "Programs using these ioctls will not be portable to other versions of UNIX, "
3796 "will not work on older versions of Linux, and will not work on future "
3797 "versions of Linux."
3801 #: build/C/man4/console_ioctl.4:846
3802 msgid "Use POSIX functions."
3806 #: build/C/man4/console_ioctl.4:870
3808 "B<dumpkeys>(1), B<kbd_mode>(1), B<loadkeys>(1), B<mknod>(1), B<setleds>(1), "
3809 "B<setmetamode>(1), B<execve>(2), B<fcntl>(2), B<ioperm>(2), B<termios>(3), "
3810 "B<console>(4), B<console_codes>(4), B<mt>(4), B<sd>(4), B<tty>(4), "
3811 "B<tty_ioctl>(4), B<ttyS>(4), B<vcs>(4), B<vcsa>(4), B<charsets>(7), "
3812 "B<mapscrn>(8), B<resizecons>(8), B<setfont>(8)"
3816 #: build/C/man4/console_ioctl.4:873
3817 msgid "I</usr/include/linux/kd.h>, I</usr/include/linux/vt.h>"
3821 #: build/C/man5/core.5:25
3827 #: build/C/man5/core.5:25
3833 #: build/C/man5/core.5:28
3834 msgid "core - core dump file"
3838 #: build/C/man5/core.5:39
3840 "The default action of certain signals is to cause a process to terminate and "
3841 "produce a I<core dump file>, a disk file containing an image of the "
3842 "process's memory at the time of termination. This image can be used in a "
3843 "debugger (e.g., B<gdb>(1)) to inspect the state of the program at the time "
3844 "that it terminated. A list of the signals which cause a process to dump "
3845 "core can be found in B<signal>(7)."
3849 #: build/C/man5/core.5:46
3851 "A process can set its soft B<RLIMIT_CORE> resource limit to place an upper "
3852 "limit on the size of the core dump file that will be produced if it receives "
3853 "a \"core dump\" signal; see B<getrlimit>(2) for details."
3857 #: build/C/man5/core.5:49
3858 msgid "There are various circumstances in which a core dump file is not produced:"
3862 #: build/C/man5/core.5:61
3864 "The process does not have permission to write the core file. (By default "
3865 "the core file is called I<core>, and is created in the current working "
3866 "directory. See below for details on naming.) Writing the core file will "
3867 "fail if the directory in which it is to be created is nonwritable, or if a "
3868 "file with the same name exists and is not writable or is not a regular file "
3869 "(e.g., it is a directory or a symbolic link)."
3873 #: build/C/man5/core.5:65
3875 "A (writable, regular) file with the same name as would be used for the core "
3876 "dump already exists, but there is more than one hard link to that file."
3880 #: build/C/man5/core.5:69
3882 "The filesystem where the core dump file would be created is full; or has run "
3883 "out of inodes; or is mounted read-only; or the user has reached their quota "
3884 "for the filesystem."
3888 #: build/C/man5/core.5:72
3889 msgid "The directory in which the core dump file is to be created does not exist."
3893 #: build/C/man5/core.5:85
3895 "The B<RLIMIT_CORE> (core file size) or B<RLIMIT_FSIZE> (file size) resource "
3896 "limits for the process are set to zero; see B<getrlimit>(2) and the "
3897 "documentation of the shell's I<ulimit> command (I<limit> in B<csh>(1))."
3901 #: build/C/man5/core.5:88
3903 "The binary being executed by the process does not have read permission "
3907 #. FIXME . Perhaps relocate discussion of /proc/sys/fs/suid_dumpable
3908 #. and PR_SET_DUMPABLE to this page?
3910 #: build/C/man5/core.5:101
3912 "The process is executing a set-user-ID (set-group-ID) program that is owned "
3913 "by a user (group) other than the real user (group) ID of the process. "
3914 "(However, see the description of the B<prctl>(2) B<PR_SET_DUMPABLE> "
3915 "operation, and the description of the I</proc/sys/fs/suid_dumpable> file in "
3919 #. commit 046d662f481830e652ac34cd112249adde16452a
3921 #: build/C/man5/core.5:107
3923 "(Since Linux 3.7) The kernel was configured without the B<CONFIG_COREDUMP> "
3928 #: build/C/man5/core.5:113
3930 "In addition, a core dump may exclude part of the address space of the "
3931 "process if the B<madvise>(2) B<MADV_DONTDUMP> flag was employed."
3935 #: build/C/man5/core.5:113
3937 msgid "Naming of core dump files"
3941 #: build/C/man5/core.5:122
3943 "By default, a core dump file is named I<core>, but the "
3944 "I</proc/sys/kernel/core_pattern> file (since Linux 2.6 and 2.4.21) can be "
3945 "set to define a template that is used to name core dump files. The template "
3946 "can contain % specifiers which are substituted by the following values when "
3947 "a core file is created:"
3951 #: build/C/man5/core.5:125
3957 #: build/C/man5/core.5:128
3958 msgid "a single % character"
3962 #: build/C/man5/core.5:128
3968 #: build/C/man5/core.5:131
3969 msgid "core file size soft resource limit of crashing process (since Linux 2.6.24)"
3973 #: build/C/man5/core.5:131
3978 #. Added in git commit 12a2b4b2241e318b4f6df31228e4272d2c2968a1
3980 #: build/C/man5/core.5:138
3982 "dump mode\\(emsame as value returned by B<prctl>(2) B<PR_GET_DUMPABLE> "
3987 #: build/C/man5/core.5:138
3993 #: build/C/man5/core.5:141
3994 msgid "executable filename (without path prefix)"
3998 #: build/C/man5/core.5:141
4004 #: build/C/man5/core.5:146
4006 "pathname of executable, with slashes (\\(aq/\\(aq) replaced by exclamation "
4007 "marks (\\(aq!\\(aq) (since Linux 3.0)."
4011 #: build/C/man5/core.5:146
4017 #: build/C/man5/core.5:149
4018 msgid "(numeric) real GID of dumped process"
4022 #: build/C/man5/core.5:149
4028 #: build/C/man5/core.5:152
4029 msgid "hostname (same as I<nodename> returned by B<uname>(2))"
4033 #: build/C/man5/core.5:152
4039 #: build/C/man5/core.5:156
4041 "PID of dumped process, as seen in the PID namespace in which the process "
4046 #: build/C/man5/core.5:156
4051 #. Added in git commit 65aafb1e7484b7434a0c1d4c593191ebe5776a2f
4053 #: build/C/man5/core.5:161
4055 "PID of dumped process, as seen in the initial PID namespace (since Linux "
4060 #: build/C/man5/core.5:161
4066 #: build/C/man5/core.5:164
4067 msgid "number of signal causing dump"
4071 #: build/C/man5/core.5:164
4077 #: build/C/man5/core.5:168
4079 "time of dump, expressed as seconds since the Epoch, 1970-01-01 00:00:00 "
4084 #: build/C/man5/core.5:168
4090 #: build/C/man5/core.5:171
4091 msgid "(numeric) real UID of dumped process"
4095 #: build/C/man5/core.5:190
4097 "A single % at the end of the template is dropped from the core filename, as "
4098 "is the combination of a % followed by any character other than those listed "
4099 "above. All other characters in the template become a literal part of the "
4100 "core filename. The template may include \\(aq/\\(aq characters, which are "
4101 "interpreted as delimiters for directory names. The maximum size of the "
4102 "resulting core filename is 128 bytes (64 bytes in kernels before 2.6.19). "
4103 "The default value in this file is \"core\". For backward compatibility, if "
4104 "I</proc/sys/kernel/core_pattern> does not include \"%p\" and "
4105 "I</proc/sys/kernel/core_uses_pid> (see below) is nonzero, then .PID will be "
4106 "appended to the core filename."
4110 #: build/C/man5/core.5:201
4112 "Since version 2.4, Linux has also provided a more primitive method of "
4113 "controlling the name of the core dump file. If the "
4114 "I</proc/sys/kernel/core_uses_pid> file contains the value 0, then a core "
4115 "dump file is simply named I<core>. If this file contains a nonzero value, "
4116 "then the core dump file includes the process ID in a name of the form "
4120 #. 9520628e8ceb69fa9a4aee6b57f22675d9e1b709
4122 #: build/C/man5/core.5:208
4124 "Since Linux 3.6, if I</proc/sys/fs/suid_dumpable> is set to 2 "
4125 "(\"suidsafe\"), the pattern must be either an absolute pathname (starting "
4126 "with a leading \\(aq/\\(aq character) or a pipe, as defined below."
4130 #: build/C/man5/core.5:208
4132 msgid "Piping core dumps to a program"
4136 #: build/C/man5/core.5:218
4138 "Since kernel 2.6.19, Linux supports an alternate syntax for the "
4139 "I</proc/sys/kernel/core_pattern> file. If the first character of this file "
4140 "is a pipe symbol (B<|>), then the remainder of the line is interpreted as a "
4141 "program to be executed. Instead of being written to a disk file, the core "
4142 "dump is given as standard input to the program. Note the following points:"
4146 #: build/C/man5/core.5:222
4148 "The program must be specified using an absolute pathname (or a pathname "
4149 "relative to the root directory, I</>), and must immediately follow the '|' "
4154 #: build/C/man5/core.5:225
4155 msgid "The process created to run the program runs as user and group I<root>."
4159 #: build/C/man5/core.5:229
4161 "Command-line arguments can be supplied to the program (since Linux 2.6.24), "
4162 "delimited by white space (up to a total line length of 128 bytes)."
4166 #: build/C/man5/core.5:235
4168 "The command-line arguments can include any of the % specifiers listed "
4169 "above. For example, to pass the PID of the process that is being dumped, "
4170 "specify I<%p> in an argument."
4174 #: build/C/man5/core.5:235
4176 msgid "Controlling which mappings are written to the core dump"
4180 #: build/C/man5/core.5:241
4182 "Since kernel 2.6.23, the Linux-specific I</proc/PID/coredump_filter> file "
4183 "can be used to control which memory segments are written to the core dump "
4184 "file in the event that a core dump is performed for the process with the "
4185 "corresponding process ID."
4189 #: build/C/man5/core.5:247
4191 "The value in the file is a bit mask of memory mapping types (see "
4192 "B<mmap>(2)). If a bit is set in the mask, then memory mappings of the "
4193 "corresponding type are dumped; otherwise they are not dumped. The bits in "
4194 "this file have the following meanings:"
4198 #: build/C/man5/core.5:250
4204 #: build/C/man5/core.5:253
4205 msgid "Dump anonymous private mappings."
4209 #: build/C/man5/core.5:253
4215 #: build/C/man5/core.5:256
4216 msgid "Dump anonymous shared mappings."
4220 #: build/C/man5/core.5:256
4226 #: build/C/man5/core.5:259
4227 msgid "Dump file-backed private mappings."
4231 #: build/C/man5/core.5:259
4236 #. file-backed shared mappings of course also update the underlying
4239 #: build/C/man5/core.5:264
4240 msgid "Dump file-backed shared mappings."
4244 #: build/C/man5/core.5:264
4246 msgid "bit 4 (since Linux 2.6.24)"
4250 #: build/C/man5/core.5:267
4251 msgid "Dump ELF headers."
4255 #: build/C/man5/core.5:267
4257 msgid "bit 5 (since Linux 2.6.28)"
4261 #: build/C/man5/core.5:270
4262 msgid "Dump private huge pages."
4266 #: build/C/man5/core.5:270
4268 msgid "bit 6 (since Linux 2.6.28)"
4272 #: build/C/man5/core.5:273
4273 msgid "Dump shared huge pages."
4277 #: build/C/man5/core.5:281
4279 "By default, the following bits are set: 0, 1, 4 (if the "
4280 "B<CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS> kernel configuration option is "
4281 "enabled), and 5. The value of this file is displayed in hexadecimal. (The "
4282 "default value is thus displayed as 33.)"
4286 #: build/C/man5/core.5:286
4288 "Memory-mapped I/O pages such as frame buffer are never dumped, and virtual "
4289 "DSO pages are always dumped, regardless of the I<coredump_filter> value."
4293 #: build/C/man5/core.5:296
4295 "A child process created via B<fork>(2) inherits its parent's "
4296 "I<coredump_filter> value; the I<coredump_filter> value is preserved across "
4301 #: build/C/man5/core.5:300
4303 "It can be useful to set I<coredump_filter> in the parent shell before "
4304 "running a program, for example:"
4308 #: build/C/man5/core.5:305
4311 "$B< echo 0x7 E<gt> /proc/self/coredump_filter>\n"
4312 "$B< ./some_program>\n"
4316 #: build/C/man5/core.5:311
4318 "This file is provided only if the kernel was built with the "
4319 "B<CONFIG_ELF_CORE> configuration option."
4323 #: build/C/man5/core.5:316
4325 "The B<gdb>(1) I<gcore> command can be used to obtain a core dump of a "
4329 #. Changed with commit 6409324b385f3f63a03645b4422e3be67348d922
4330 #. Always including the PID in the name of the core file made
4331 #. sense for LinuxThreads, where each thread had a unique PID,
4332 #. but doesn't seem to serve any purpose with NPTL, where all the
4333 #. threads in a process share the same PID (as POSIX.1 requires).
4334 #. Probably the behavior is maintained so that applications using
4335 #. LinuxThreads continue appending the PID (the kernel has no easy
4336 #. way of telling which threading implementation the user-space
4337 #. application is using). -- mtk, April 2006
4339 #: build/C/man5/core.5:339
4341 "In Linux versions up to and including 2.6.27, if a multithreaded process "
4342 "(or, more precisely, a process that shares its memory with another process "
4343 "by being created with the B<CLONE_VM> flag of B<clone>(2)) dumps core, then "
4344 "the process ID is always appended to the core filename, unless the process "
4345 "ID was already included elsewhere in the filename via a %p specification in "
4346 "I</proc/sys/kernel/core_pattern>. (This is primarily useful when employing "
4347 "the obsolete LinuxThreads implementation, where each thread of a process has "
4352 #: build/C/man5/core.5:339 build/C/man3/gnu_get_libc_version.3:51 build/C/man3/stdarg.3:300 build/C/man4/vcs.4:101
4358 #: build/C/man5/core.5:347
4360 "The program below can be used to demonstrate the use of the pipe syntax in "
4361 "the I</proc/sys/kernel/core_pattern> file. The following shell session "
4362 "demonstrates the use of this program (compiled to create an executable named "
4363 "I<core_pattern_pipe_test>):"
4367 #: build/C/man5/core.5:368
4370 "$B< cc -o core_pattern_pipe_test core_pattern_pipe_test.c>\n"
4373 "#B< echo \"|$PWD/core_pattern_pipe_test %p UID=%u GID=%g sig=%s\" E<gt> "
4375 "B</proc/sys/kernel/core_pattern>\n"
4378 "B<^\\e> # type control-backslash\n"
4379 "Quit (core dumped)\n"
4380 "$B< cat core.info>\n"
4382 "argc[0]=E<lt>/home/mtk/core_pattern_pipe_testE<gt>\n"
4383 "argc[1]=E<lt>20575E<gt>\n"
4384 "argc[2]=E<lt>UID=1000E<gt>\n"
4385 "argc[3]=E<lt>GID=100E<gt>\n"
4386 "argc[4]=E<lt>sig=3E<gt>\n"
4387 "Total bytes in core dump: 282624\n"
4391 #: build/C/man5/core.5:370 build/C/man3/gnu_get_libc_version.3:61
4393 msgid "Program source"
4397 #: build/C/man5/core.5:374
4399 msgid "/* core_pattern_pipe_test.c */\n"
4403 #: build/C/man5/core.5:382
4406 "#define _GNU_SOURCE\n"
4407 "#include E<lt>sys/stat.hE<gt>\n"
4408 "#include E<lt>fcntl.hE<gt>\n"
4409 "#include E<lt>limits.hE<gt>\n"
4410 "#include E<lt>stdio.hE<gt>\n"
4411 "#include E<lt>stdlib.hE<gt>\n"
4412 "#include E<lt>unistd.hE<gt>\n"
4416 #: build/C/man5/core.5:384
4418 msgid "#define BUF_SIZE 1024\n"
4422 #: build/C/man5/core.5:393
4426 "main(int argc, char *argv[])\n"
4430 " char buf[BUF_SIZE];\n"
4432 " char cwd[PATH_MAX];\n"
4436 #: build/C/man5/core.5:396
4439 " /* Change our current working directory to that of the\n"
4440 " crashing process */\n"
4444 #: build/C/man5/core.5:399
4447 " snprintf(cwd, PATH_MAX, \"/proc/%s/cwd\", argv[1]);\n"
4452 #: build/C/man5/core.5:401
4454 msgid " /* Write output to file \"core.info\" in that directory */\n"
4458 #: build/C/man5/core.5:405
4461 " fp = fopen(\"core.info\", \"w+\");\n"
4462 " if (fp == NULL)\n"
4463 " exit(EXIT_FAILURE);\n"
4467 #: build/C/man5/core.5:408
4470 " /* Display command-line arguments given to core_pattern\n"
4471 " pipe program */\n"
4475 #: build/C/man5/core.5:412
4478 " fprintf(fp, \"argc=%d\\en\", argc);\n"
4479 " for (j = 0; j E<lt> argc; j++)\n"
4480 " fprintf(fp, \"argc[%d]=E<lt>%sE<gt>\\en\", j, argv[j]);\n"
4484 #: build/C/man5/core.5:414
4486 msgid " /* Count bytes in standard input (the core dump) */\n"
4490 #: build/C/man5/core.5:419
4494 " while ((nread = read(STDIN_FILENO, buf, BUF_SIZE)) E<gt> 0)\n"
4496 " fprintf(fp, \"Total bytes in core dump: %d\\en\", tot);\n"
4500 #: build/C/man5/core.5:422
4503 " exit(EXIT_SUCCESS);\n"
4508 #: build/C/man5/core.5:434
4510 "B<bash>(1), B<gdb>(1), B<getrlimit>(2), B<mmap>(2), B<prctl>(2), "
4511 "B<sigaction>(2), B<elf>(5), B<proc>(5), B<pthreads>(7), B<signal>(7)"
4515 #: build/C/man4/cpuid.4:26
4521 #: build/C/man4/cpuid.4:26 build/C/man4/msr.4:26
4527 #: build/C/man4/cpuid.4:29
4528 msgid "cpuid - x86 CPUID access device"
4532 #: build/C/man4/cpuid.4:31
4533 msgid "CPUID provides an interface for querying information about the x86 CPU."
4537 #: build/C/man4/cpuid.4:38
4539 "This device is accessed by B<lseek>(2) or B<pread>(2) to the appropriate "
4540 "CPUID level and reading in chunks of 16 bytes. A larger read size means "
4541 "multiple reads of consecutive levels."
4545 #: build/C/man4/cpuid.4:47
4547 "The lower 32 bits of the file position is used as the incoming I<%eax>, and "
4548 "the upper 32 bits of the file position as the incoming I<%ecx>, the latter "
4549 "intended for \"counting\" I<eax> levels like I<eax=4>."
4553 #: build/C/man4/cpuid.4:57
4555 "This driver uses I</dev/cpu/CPUNUM/cpuid>, where I<CPUNUM> is the minor "
4556 "number, and on an SMP box will direct the access to CPU I<CPUNUM> as listed "
4557 "in I</proc/cpuinfo>."
4561 #: build/C/man4/cpuid.4:62
4563 "This file is protected so that it can be read only by the user I<root>, or "
4564 "members of the group I<root>."
4568 #: build/C/man4/cpuid.4:67
4570 "The CPUID instruction can be directly executed by a program using inline "
4571 "assembler. However this device allows convenient access to all CPUs without "
4572 "changing process affinity."
4576 #: build/C/man4/cpuid.4:76
4578 "Most of the information in I<cpuid> is reported by the kernel in cooked form "
4579 "either in I</proc/cpuinfo> or through subdirectories in "
4580 "I</sys/devices/system/cpu>. Direct CPUID access through this device should "
4581 "only be used in exceptional cases."
4585 #: build/C/man4/cpuid.4:82
4587 "The I<cpuid> driver is not auto-loaded. On modular kernels you might need "
4588 "to use the following command to load it explicitly before use:"
4592 #: build/C/man4/cpuid.4:84
4594 msgid " $ I<modprobe cpuid>\n"
4598 #: build/C/man4/cpuid.4:87
4600 "There is no support for CPUID functions that require additional input "
4605 #: build/C/man4/cpuid.4:89
4606 msgid "Very old x86 CPUs don't support CPUID."
4610 #: build/C/man4/cpuid.4:93
4612 "Intel Corporation, Intel 64 and IA-32 Architectures Software Developer's "
4613 "Manual Volume 2A: Instruction Set Reference, A-M, 3-180 CPUID reference."
4617 #: build/C/man4/cpuid.4:96
4619 "Intel Corporation, Intel Processor Identification and the CPUID Instruction, "
4620 "Application note 485."
4624 #: build/C/man4/dsp56k.4:27
4630 #: build/C/man4/dsp56k.4:30
4631 msgid "dsp56k - DSP56001 interface device"
4635 #: build/C/man4/dsp56k.4:33
4637 msgid "#include E<lt>asm/dsp56k.hE<gt>\n"
4641 #: build/C/man4/dsp56k.4:36
4644 "B<ssize_t read(int >I<fd>B<, void *>I<data>B<, size_t >I<length>B<);>\n"
4645 "B<ssize_t write(int >I<fd>B<, void *>I<data>B<, size_t >I<length>B<);>\n"
4649 #: build/C/man4/dsp56k.4:42
4652 "B<int ioctl(int >I<fd>B<, DSP56K_UPLOAD, struct dsp56k_upload "
4653 "*>I<program>B<);>\n"
4654 "B<int ioctl(int >I<fd>B<, DSP56K_SET_TX_WSIZE, int >I<wsize>B<);>\n"
4655 "B<int ioctl(int >I<fd>B<, DSP56K_SET_RX_WSIZE, int >I<wsize>B<);>\n"
4656 "B<int ioctl(int >I<fd>B<, DSP56K_HOST_FLAGS, struct dsp56k_host_flags "
4658 "B<int ioctl(int >I<fd>B<, DSP56K_HOST_CMD, int >I<cmd>B<);>\n"
4662 #: build/C/man4/dsp56k.4:43 build/C/man4/fd.4:31 build/C/man4/full.4:29 build/C/man4/initrd.4:38 build/C/man4/lp.4:32 build/C/man4/mouse.4:29 build/C/man4/sd.4:34
4664 msgid "CONFIGURATION"
4668 #: build/C/man4/dsp56k.4:46
4670 "The dsp56k device is a character device with major number 55 and minor "
4675 #: build/C/man4/dsp56k.4:52
4677 "The Motorola DSP56001 is a fully programmable 24-bit digital signal "
4678 "processor found in Atari Falcon030-compatible computers. The I<dsp56k> "
4679 "special file is used to control the DSP56001, and to send and receive data "
4680 "using the bidirectional handshaked host port."
4684 #: build/C/man4/dsp56k.4:62
4686 "To send a data stream to the signal processor, use B<write>(2) to the "
4687 "device, and B<read>(2) to receive processed data. The data can be sent or "
4688 "received in 8, 16, 24, or 32-bit quantities on the host side, but will "
4689 "always be seen as 24-bit quantities in the DSP56001."
4693 #: build/C/man4/dsp56k.4:67
4694 msgid "The following B<ioctl>(2) calls are used to control the I<dsp56k> device:"
4698 #: build/C/man4/dsp56k.4:67
4700 msgid "B<DSP56K_UPLOAD>"
4704 #: build/C/man4/dsp56k.4:74
4706 "resets the DSP56001 and uploads a program. The third B<ioctl>(2) argument "
4707 "must be a pointer to a I<struct dsp56k_binary> with members I<bin> pointing "
4708 "to a DSP56001 binary program, and I<len> set to the length of the program, "
4709 "counted in 24-bit words."
4713 #: build/C/man4/dsp56k.4:74
4715 msgid "B<DSP56K_SET_TX_WSIZE>"
4719 #: build/C/man4/dsp56k.4:82
4721 "sets the transmit word size. Allowed values are in the range 1 to 4, and is "
4722 "the number of bytes that will be sent at a time to the DSP56001. These data "
4723 "quantities will either be padded with zero bytes, or truncated to fit the "
4724 "native 24-bit data format of the DSP56001."
4728 #: build/C/man4/dsp56k.4:82
4730 msgid "B<DSP56K_SET_RX_WSIZE>"
4734 #: build/C/man4/dsp56k.4:89
4736 "sets the receive word size. Allowed values are in the range 1 to 4, and is "
4737 "the number of bytes that will be received at a time from the DSP56001. "
4738 "These data quantities will either truncated, or padded with a null byte "
4739 "(\\(aq\\e0\\(aq) to fit the native 24-bit data format of the DSP56001."
4743 #: build/C/man4/dsp56k.4:89
4745 msgid "B<DSP56K_HOST_FLAGS>"
4749 #: build/C/man4/dsp56k.4:96
4751 "read and write the host flags. The host flags are four general-purpose bits "
4752 "that can be read by both the hosting computer and the DSP56001. Bits 0 and "
4753 "1 can be written by the host, and bits 2 and 3 can be written by the "
4758 #: build/C/man4/dsp56k.4:106
4760 "To access the host flags, the third B<ioctl>(2) argument must be a pointer "
4761 "to a I<struct dsp56k_host_flags>. If bit 0 or 1 is set in the I<dir> "
4762 "member, the corresponding bit in I<out> will be written to the host flags. "
4763 "The state of all host flags will be returned in the lower four bits of the "
4768 #: build/C/man4/dsp56k.4:106
4770 msgid "B<DSP56K_HOST_CMD>"
4774 #: build/C/man4/dsp56k.4:110
4776 "sends a host command. Allowed values are in the range 0 to 31, and is a "
4777 "user-defined command handled by the program running in the DSP56001."
4781 #. Fredrik Noring <noring@nocrew.org>, lars brinkhoff <lars@nocrew.org>,
4782 #. Tomas Berndtsson <tomas@nocrew.org>.
4784 #: build/C/man4/dsp56k.4:115
4789 #: build/C/man4/dsp56k.4:121
4791 "I<linux/include/asm-m68k/dsp56k.h>, I<linux/drivers/char/dsp56k.c>, E<.UR "
4792 "http://dsp56k.nocrew.org/> E<.UE ,> DSP56000/DSP56001 Digital Signal "
4793 "Processor User's Manual"
4797 #: build/C/man4/fd.4:28
4803 #: build/C/man4/fd.4:28
4809 #: build/C/man4/fd.4:31
4810 msgid "fd - floppy disk device"
4814 #: build/C/man4/fd.4:48
4816 "Floppy drives are block devices with major number 2. Typically they are "
4817 "owned by I<root.floppy> (i.e., user root, group floppy) and have either mode "
4818 "0660 (access checking via group membership) or mode 0666 (everybody has "
4819 "access). The minor numbers encode the device type, drive number, and "
4820 "controller number. For each device type (that is, combination of density "
4821 "and track count) there is a base minor number. To this base number, add "
4822 "the drive's number on its controller and 128 if the drive is on the "
4823 "secondary controller. In the following device tables, I<n> represents the "
4828 #: build/C/man4/fd.4:55
4830 "B<Warning: If you use formats with more tracks than supported by your drive, "
4831 "you may cause it mechanical damage.> Trying once if more tracks than the "
4832 "usual 40/80 are supported should not damage it, but no warranty is given for "
4833 "that. If you are not sure, don't create device entries for those formats, "
4834 "so as to prevent their usage."
4838 #: build/C/man4/fd.4:58
4840 "Drive-independent device files which automatically detect the media format "
4845 #: build/C/man4/fd.4:60
4847 msgid "Name\tBase minor #\n"
4851 #: build/C/man4/fd.4:61 build/C/man4/fd.4:69 build/C/man4/fd.4:77 build/C/man4/fd.4:94 build/C/man4/fd.4:106 build/C/man4/fd.4:125
4857 #: build/C/man4/fd.4:62
4859 msgid "B<fd>I<n>\t0\n"
4863 #: build/C/man4/fd.4:66
4864 msgid "5.25 inch double-density device files:"
4868 #: build/C/man4/fd.4:68 build/C/man4/fd.4:76 build/C/man4/fd.4:93 build/C/man4/fd.4:105 build/C/man4/fd.4:124
4870 msgid "Name\tCapac.\tCyl.\tSect.\tHeads\tBase minor #\n"
4874 #: build/C/man4/fd.4:70
4876 msgid "B<fd>I<n>B<d360>\t360K\t40\t9\t2\t4\n"
4880 #: build/C/man4/fd.4:74
4881 msgid "5.25 inch high-density device files:"
4885 #: build/C/man4/fd.4:78
4887 msgid "B<fd>I<n>B<h360>\t360K\t40\t9\t2\t20\n"
4891 #: build/C/man4/fd.4:79
4893 msgid "B<fd>I<n>B<h410>\t410K\t41\t10\t2\t48\n"
4897 #: build/C/man4/fd.4:80
4899 msgid "B<fd>I<n>B<h420>\t420K\t42\t10\t2\t64\n"
4903 #: build/C/man4/fd.4:81
4905 msgid "B<fd>I<n>B<h720>\t720K\t80\t9\t2\t24\n"
4909 #: build/C/man4/fd.4:82
4911 msgid "B<fd>I<n>B<h880>\t880K\t80\t11\t2\t80\n"
4915 #: build/C/man4/fd.4:83
4917 msgid "B<fd>I<n>B<h1200>\t1200K\t80\t15\t2\t8\n"
4921 #: build/C/man4/fd.4:84
4923 msgid "B<fd>I<n>B<h1440>\t1440K\t80\t18\t2\t40\n"
4927 #: build/C/man4/fd.4:85
4929 msgid "B<fd>I<n>B<h1476>\t1476K\t82\t18\t2\t56\n"
4933 #: build/C/man4/fd.4:86
4935 msgid "B<fd>I<n>B<h1494>\t1494K\t83\t18\t2\t72\n"
4939 #: build/C/man4/fd.4:87
4941 msgid "B<fd>I<n>B<h1600>\t1600K\t80\t20\t2\t92\n"
4945 #: build/C/man4/fd.4:91
4946 msgid "3.5 inch double-density device files:"
4950 #: build/C/man4/fd.4:95
4952 msgid "B<fd>I<n>B<u360>\t360K\t80\t9\t1\t12\n"
4956 #: build/C/man4/fd.4:96 build/C/man4/fd.4:108
4958 msgid "B<fd>I<n>B<u720>\t720K\t80\t9\t2\t16\n"
4962 #: build/C/man4/fd.4:97
4964 msgid "B<fd>I<n>B<u800>\t800K\t80\t10\t2\t120\n"
4968 #: build/C/man4/fd.4:98
4970 msgid "B<fd>I<n>B<u1040>\t1040K\t80\t13\t2\t84\n"
4974 #: build/C/man4/fd.4:99
4976 msgid "B<fd>I<n>B<u1120>\t1120K\t80\t14\t2\t88\n"
4980 #: build/C/man4/fd.4:103
4981 msgid "3.5 inch high-density device files:"
4985 #: build/C/man4/fd.4:107
4987 msgid "B<fd>I<n>B<u360>\t360K\t40\t9\t2\t12\n"
4991 #: build/C/man4/fd.4:109
4993 msgid "B<fd>I<n>B<u820>\t820K\t82\t10\t2\t52\n"
4997 #: build/C/man4/fd.4:110
4999 msgid "B<fd>I<n>B<u830>\t830K\t83\t10\t2\t68\n"
5003 #: build/C/man4/fd.4:111
5005 msgid "B<fd>I<n>B<u1440>\t1440K\t80\t18\t2\t28\n"
5009 #: build/C/man4/fd.4:112
5011 msgid "B<fd>I<n>B<u1600>\t1600K\t80\t20\t2\t124\n"
5015 #: build/C/man4/fd.4:113
5017 msgid "B<fd>I<n>B<u1680>\t1680K\t80\t21\t2\t44\n"
5021 #: build/C/man4/fd.4:114
5023 msgid "B<fd>I<n>B<u1722>\t1722K\t82\t21\t2\t60\n"
5027 #: build/C/man4/fd.4:115
5029 msgid "B<fd>I<n>B<u1743>\t1743K\t83\t21\t2\t76\n"
5033 #: build/C/man4/fd.4:116
5035 msgid "B<fd>I<n>B<u1760>\t1760K\t80\t22\t2\t96\n"
5039 #: build/C/man4/fd.4:117
5041 msgid "B<fd>I<n>B<u1840>\t1840K\t80\t23\t2\t116\n"
5045 #: build/C/man4/fd.4:118
5047 msgid "B<fd>I<n>B<u1920>\t1920K\t80\t24\t2\t100\n"
5051 #: build/C/man4/fd.4:122
5052 msgid "3.5 inch extra-density device files:"
5056 #: build/C/man4/fd.4:126
5058 msgid "B<fd>I<n>B<u2880>\t2880K\t80\t36\t2\t32\n"
5062 #: build/C/man4/fd.4:127
5064 msgid "B<fd>I<n>B<CompaQ>\t2880K\t80\t36\t2\t36\n"
5068 #: build/C/man4/fd.4:128
5070 msgid "B<fd>I<n>B<u3200>\t3200K\t80\t40\t2\t104\n"
5074 #: build/C/man4/fd.4:129
5076 msgid "B<fd>I<n>B<u3520>\t3520K\t80\t44\t2\t108\n"
5080 #: build/C/man4/fd.4:130
5082 msgid "B<fd>I<n>B<u3840>\t3840K\t80\t48\t2\t112\n"
5086 #: build/C/man4/fd.4:137
5088 "B<fd> special files access the floppy disk drives in raw mode. The "
5089 "following B<ioctl>(2) calls are supported by B<fd> devices:"
5093 #: build/C/man4/fd.4:137
5099 #: build/C/man4/fd.4:139
5100 msgid "clears the media information of a drive (geometry of disk in drive)."
5104 #: build/C/man4/fd.4:139
5110 #: build/C/man4/fd.4:143
5112 "sets the media information of a drive. The media information will be lost "
5113 "when the media is changed."
5117 #: build/C/man4/fd.4:143
5123 #: build/C/man4/fd.4:149
5125 "sets the media information of a drive (geometry of disk in drive). The "
5126 "media information will not be lost when the media is changed. This will "
5127 "disable autodetection. In order to reenable autodetection, you have to "
5128 "issue an B<FDCLRPRM>."
5132 #: build/C/man4/fd.4:149 build/C/man4/fd.4:161
5134 msgid "B<FDGETDRVTYP>"
5138 #: build/C/man4/fd.4:154
5140 "returns the type of a drive (name parameter). For formats which work in "
5141 "several drive types, B<FDGETDRVTYP> returns a name which is appropriate for "
5142 "the oldest drive type which supports this format."
5146 #: build/C/man4/fd.4:154
5152 #: build/C/man4/fd.4:156
5153 msgid "invalidates the buffer cache for the given drive."
5157 #: build/C/man4/fd.4:156 build/C/man4/fd.4:159
5159 msgid "B<FDSETMAXERRS>"
5163 #: build/C/man4/fd.4:159
5165 "sets the error thresholds for reporting errors, aborting the operation, "
5166 "recalibrating, resetting, and reading sector by sector."
5170 #: build/C/man4/fd.4:161
5171 msgid "gets the current error thresholds."
5175 #: build/C/man4/fd.4:163
5176 msgid "gets the internal name of the drive."
5180 #: build/C/man4/fd.4:163
5182 msgid "B<FDWERRORCLR>"
5186 #: build/C/man4/fd.4:165
5187 msgid "clears the write error statistics."
5191 #: build/C/man4/fd.4:165
5193 msgid "B<FDWERRORGET>"
5197 #: build/C/man4/fd.4:172
5199 "reads the write error statistics. These include the total number of write "
5200 "errors, the location and disk of the first write error, and the location and "
5201 "disk of the last write error. Disks are identified by a generation number "
5202 "which is incremented at (almost) each disk change."
5206 #: build/C/man4/fd.4:172
5208 msgid "B<FDTWADDLE>"
5212 #: build/C/man4/fd.4:176
5214 "Switch the drive motor off for a few microseconds. This might be needed in "
5215 "order to access a disk whose sectors are too close together."
5219 #: build/C/man4/fd.4:176
5221 msgid "B<FDSETDRVPRM>"
5225 #: build/C/man4/fd.4:178
5226 msgid "sets various drive parameters."
5230 #: build/C/man4/fd.4:178
5232 msgid "B<FDGETDRVPRM>"
5236 #: build/C/man4/fd.4:180
5237 msgid "reads these parameters back."
5241 #: build/C/man4/fd.4:180
5243 msgid "B<FDGETDRVSTAT>"
5247 #: build/C/man4/fd.4:182
5248 msgid "gets the cached drive state (disk changed, write protected et al.)"
5252 #: build/C/man4/fd.4:182
5254 msgid "B<FDPOLLDRVSTAT>"
5258 #: build/C/man4/fd.4:184
5259 msgid "polls the drive and return its state."
5263 #: build/C/man4/fd.4:184
5265 msgid "B<FDGETFDCSTAT>"
5269 #: build/C/man4/fd.4:186
5270 msgid "gets the floppy controller state."
5274 #: build/C/man4/fd.4:186
5280 #: build/C/man4/fd.4:188
5281 msgid "resets the floppy controller under certain conditions."
5285 #: build/C/man4/fd.4:188
5291 #: build/C/man4/fd.4:190
5292 msgid "sends a raw command to the floppy controller."
5296 #: build/C/man4/fd.4:195
5298 "For more precise information, consult also the I<E<lt>linux/fd.hE<gt>> and "
5299 "I<E<lt>linux/fdreg.hE<gt>> include files, as well as the B<floppycontrol>(1) "
5304 #: build/C/man4/fd.4:197
5309 #: build/C/man4/fd.4:203
5311 "The various formats permit reading and writing many types of disks. "
5312 "However, if a floppy is formatted with an inter-sector gap that is too "
5313 "small, performance may drop, to the point of needing a few seconds to access "
5314 "an entire track. To prevent this, use interleaved formats."
5318 #: build/C/man4/fd.4:207
5320 "It is not possible to read floppies which are formatted using GCR (group "
5321 "code recording), which is used by Apple II and Macintosh computers (800k "
5326 #. Alain Knaff (Alain.Knaff@imag.fr), David Niemi
5327 #. (niemidc@clark.net), Bill Broadhurst (bbroad@netcom.com).
5329 #: build/C/man4/fd.4:214
5331 "Reading floppies which are hard sectored (one hole per sector, with the "
5332 "index hole being a little skewed) is not supported. This used to be common "
5333 "with older 8-inch floppies."
5337 #: build/C/man4/fd.4:222
5339 "B<chown>(1), B<floppycontrol>(1), B<getfdprm>(1), B<mknod>(1), "
5340 "B<superformat>(1), B<mount>(8), B<setfdprm>(8)"
5344 #: build/C/man7/fifo.7:13
5350 #: build/C/man7/fifo.7:13
5356 #: build/C/man7/fifo.7:16
5357 msgid "fifo - first-in first-out special file, named pipe"
5361 #: build/C/man7/fifo.7:28
5363 "A FIFO special file (a named pipe) is similar to a pipe, except that it is "
5364 "accessed as part of the filesystem. It can be opened by multiple processes "
5365 "for reading or writing. When processes are exchanging data via the FIFO, "
5366 "the kernel passes all data internally without writing it to the filesystem. "
5367 "Thus, the FIFO special file has no contents on the filesystem; the "
5368 "filesystem entry merely serves as a reference point so that processes can "
5369 "access the pipe using a name in the filesystem."
5373 #: build/C/man7/fifo.7:35
5375 "The kernel maintains exactly one pipe object for each FIFO special file that "
5376 "is opened by at least one process. The FIFO must be opened on both ends "
5377 "(reading and writing) before data can be passed. Normally, opening the "
5378 "FIFO blocks until the other end is opened also."
5382 #: build/C/man7/fifo.7:44
5384 "A process can open a FIFO in nonblocking mode. In this case, opening for "
5385 "read-only will succeed even if no-one has opened on the write side yet, "
5386 "opening for write-only will fail with B<ENXIO> (no such device or address) "
5387 "unless the other end has already been opened."
5391 #: build/C/man7/fifo.7:54
5393 "Under Linux, opening a FIFO for read and write will succeed both in blocking "
5394 "and nonblocking mode. POSIX leaves this behavior undefined. This can be "
5395 "used to open a FIFO for writing while there are no readers available. A "
5396 "process that uses both ends of the connection in order to communicate with "
5397 "itself should be very careful to avoid deadlocks."
5401 #: build/C/man7/fifo.7:59
5403 "When a process tries to write to a FIFO that is not opened for read on the "
5404 "other side, the process is sent a B<SIGPIPE> signal."
5408 #: build/C/man7/fifo.7:65
5410 "FIFO special files can be created by B<mkfifo>(3), and are indicated by I<ls "
5411 "-l> with the file type \\(aqp\\(aq."
5415 #: build/C/man7/fifo.7:74
5417 "B<mkfifo>(1), B<open>(2), B<pipe>(2), B<sigaction>(2), B<signal>(2), "
5418 "B<socketpair>(2), B<mkfifo>(3), B<pipe>(7)"
5422 #: build/C/man4/full.4:26
5428 #: build/C/man4/full.4:26
5434 #: build/C/man4/full.4:29
5435 msgid "full - always full device"
5439 #: build/C/man4/full.4:34
5441 "If your system does not have I</dev/full> created already, it can be created "
5442 "with the following commands:"
5446 #: build/C/man4/full.4:38
5449 " mknod -m 666 /dev/full c 1 7\n"
5450 " chown root:root /dev/full\n"
5454 #: build/C/man4/full.4:44
5455 msgid "File I</dev/full> has major device number 1 and minor device number 7."
5459 #: build/C/man4/full.4:51
5461 "Writes to the I</dev/full> device will fail with an B<ENOSPC> error. This "
5462 "can be used to test how a program handles disk-full errors."
5466 #: build/C/man4/full.4:55
5467 msgid "Reads from the I</dev/full> device will return \\e0 characters."
5471 #: build/C/man4/full.4:59
5472 msgid "Seeks on I</dev/full> will always succeed."
5476 #: build/C/man4/full.4:61
5481 #: build/C/man4/full.4:65
5482 msgid "B<mknod>(1), B<null>(4), B<zero>(4)"
5486 #: build/C/man3/gnu_get_libc_version.3:26
5488 msgid "GNU_GET_LIBC_VERSION"
5492 #: build/C/man3/gnu_get_libc_version.3:26
5498 #: build/C/man3/gnu_get_libc_version.3:29
5499 msgid "gnu_get_libc_version, gnu_get_libc_release - get glibc version and release"
5503 #: build/C/man3/gnu_get_libc_version.3:32
5505 msgid "B<#include E<lt>gnu/libc-version.hE<gt>>\n"
5509 #: build/C/man3/gnu_get_libc_version.3:35
5512 "B<const char *gnu_get_libc_version(void);>\n"
5513 "B<const char *gnu_get_libc_release(void);>\n"
5517 #: build/C/man3/gnu_get_libc_version.3:40
5519 "The function B<gnu_get_libc_version>() returns a string that identifies the "
5520 "glibc version available on the system."
5524 #: build/C/man3/gnu_get_libc_version.3:47
5526 "The function B<gnu_get_libc_release>() returns a string indicates the "
5527 "release status of the glibc version available on the system. This will be a "
5528 "string such as I<stable>."
5532 #: build/C/man3/gnu_get_libc_version.3:47 build/C/man3/mkfifo.3:178 build/C/man2/mknod.2:240 build/C/man4/vcs.4:99
5538 #: build/C/man3/gnu_get_libc_version.3:49
5539 msgid "These functions first appeared in glibc in version 2.1."
5543 #: build/C/man3/gnu_get_libc_version.3:49 build/C/man3/makedev.3:62 build/C/man3/mkfifo.3:191 build/C/man2/mknod.2:244 build/C/man3/setlogmask.3:75 build/C/man3/stdarg.3:238 build/C/man2/syslog.2:298 build/C/man3/syslog.3:252 build/C/man7/uri.7:584
5545 msgid "CONFORMING TO"
5549 #: build/C/man3/gnu_get_libc_version.3:51
5550 msgid "These functions are glibc-specific."
5554 #: build/C/man3/gnu_get_libc_version.3:53
5555 msgid "When run, the program below will produce output such as the following:"
5559 #: build/C/man3/gnu_get_libc_version.3:59
5563 "GNU libc version: 2.8\n"
5564 "GNU libc release: stable\n"
5568 #: build/C/man3/gnu_get_libc_version.3:67
5571 "#include E<lt>gnu/libc-version.hE<gt>\n"
5572 "#include E<lt>stdlib.hE<gt>\n"
5573 "#include E<lt>stdio.hE<gt>\n"
5577 #: build/C/man3/gnu_get_libc_version.3:75
5581 "main(int argc, char *argv[])\n"
5583 " printf(\"GNU libc version: %s\\en\", gnu_get_libc_version());\n"
5584 " printf(\"GNU libc release: %s\\en\", gnu_get_libc_release());\n"
5585 " exit(EXIT_SUCCESS);\n"
5590 #: build/C/man3/gnu_get_libc_version.3:78
5591 msgid "B<confstr>(3)"
5595 #: build/C/man4/hd.4:29
5601 #: build/C/man4/hd.4:29
5607 #: build/C/man4/hd.4:32
5608 msgid "hd - MFM/IDE hard disk devices"
5612 #: build/C/man4/hd.4:47
5614 "The B<hd*> devices are block devices to access MFM/IDE hard disk drives in "
5615 "raw mode. The master drive on the primary IDE controller (major device "
5616 "number 3) is B<hda>; the slave drive is B<hdb>. The master drive of the "
5617 "second controller (major device number 22) is B<hdc> and the slave is "
5622 #: build/C/man4/hd.4:71
5624 "General IDE block device names have the form B<hd>I<X>, or B<hd>I<XP>, where "
5625 "I<X> is a letter denoting the physical drive, and I<P> is a number denoting "
5626 "the partition on that physical drive. The first form, B<hd>I<X>, is used to "
5627 "address the whole drive. Partition numbers are assigned in the order the "
5628 "partitions are discovered, and only nonempty, nonextended partitions get a "
5629 "number. However, partition numbers 1-4 are given to the four partitions "
5630 "described in the MBR (the \"primary\" partitions), regardless of whether "
5631 "they are unused or extended. Thus, the first logical partition will be "
5632 "B<hd>I<X>B<5>\\&. Both DOS-type partitioning and BSD-disklabel partitioning "
5633 "are supported. You can have at most 63 partitions on an IDE disk."
5637 #: build/C/man4/hd.4:77
5639 "For example, I</dev/hda> refers to all of the first IDE drive in the system; "
5640 "and I</dev/hdb3> refers to the third DOS \"primary\" partition on the second "
5645 #: build/C/man4/hd.4:79 build/C/man4/ttyS.4:34
5646 msgid "They are typically created by:"
5650 #: build/C/man4/hd.4:82
5651 msgid "mknod -m 660 /dev/hda b 3 0"
5655 #: build/C/man4/hd.4:84
5656 msgid "mknod -m 660 /dev/hda1 b 3 1"
5660 #: build/C/man4/hd.4:86
5661 msgid "mknod -m 660 /dev/hda2 b 3 2"
5665 #: build/C/man4/hd.4:88 build/C/man4/hd.4:98
5670 #: build/C/man4/hd.4:90
5671 msgid "mknod -m 660 /dev/hda8 b 3 8"
5675 #: build/C/man4/hd.4:92
5676 msgid "mknod -m 660 /dev/hdb b 3 64"
5680 #: build/C/man4/hd.4:94
5681 msgid "mknod -m 660 /dev/hdb1 b 3 65"
5685 #: build/C/man4/hd.4:96
5686 msgid "mknod -m 660 /dev/hdb2 b 3 66"
5690 #: build/C/man4/hd.4:100
5691 msgid "mknod -m 660 /dev/hdb8 b 3 72"
5695 #: build/C/man4/hd.4:102
5696 msgid "chown root:disk /dev/hd*"
5700 #: build/C/man4/hd.4:105
5705 #: build/C/man4/hd.4:110
5706 msgid "B<chown>(1), B<mknod>(1), B<sd>(4), B<mount>(8)"
5710 #: build/C/man4/hpsa.4:10
5716 #: build/C/man4/hpsa.4:13
5717 msgid "hpsa - HP Smart Array SCSI driver"
5721 #: build/C/man4/hpsa.4:16
5723 msgid "modprobe hpsa [ hpsa_allow_any=1 ]\n"
5727 #: build/C/man4/hpsa.4:20
5728 msgid "B<hpsa> is a SCSI driver for HP Smart Array RAID controllers."
5732 #: build/C/man4/hpsa.4:39
5734 "I<hpsa_allow_any=1>: This option allows the driver to attempt to operate on "
5735 "any HP Smart Array hardware RAID controller, even if it is not explicitly "
5736 "known to the driver. This allows newer hardware to work with older "
5737 "drivers. Typically this is used to allow installation of operating systems "
5738 "from media that predates the RAID controller, though it may also be used to "
5739 "enable B<hpsa> to drive older controllers that would normally be handled by "
5740 "the B<cciss>(4) driver. These older boards have not been tested and are "
5741 "not supported with B<hpsa>, and B<cciss>(4) should still be used for these."
5745 #: build/C/man4/hpsa.4:43
5746 msgid "The B<hpsa> driver supports the following Smart Array boards:"
5750 #: build/C/man4/hpsa.4:54
5753 " Smart Array P700M\n"
5754 " Smart Array P212\n"
5755 " Smart Array P410\n"
5756 " Smart Array P410i\n"
5757 " Smart Array P411\n"
5758 " Smart Array P812\n"
5759 " Smart Array P712m\n"
5760 " Smart Array P711m\n"
5761 " StorageWorks P1210m\n"
5765 #: build/C/man4/hpsa.4:78
5767 "Logical drives are accessed via the SCSI disk driver (B<sd>(4)), tape drives "
5768 "via the SCSI tape driver (B<st>(4)), and the RAID controller via the SCSI "
5769 "generic driver (B<sg>(4)), with device nodes named I</dev/sd*>, I</dev/st*>, "
5770 "and I</dev/sg*>, respectively."
5774 #: build/C/man4/hpsa.4:78
5776 msgid "HPSA-specific host attribute files in /sys"
5780 #: build/C/man4/hpsa.4:79
5782 msgid "I</sys/class/scsi_host/host*/rescan>"
5786 #: build/C/man4/hpsa.4:93
5788 "This is a write-only attribute. Writing to this attribute will cause the "
5789 "driver to scan for new, changed, or removed devices (e.g,. hot-plugged tape "
5790 "drives, or newly configured or deleted logical drives, etc.) and notify the "
5791 "SCSI midlayer of any changes detected. Normally a rescan is triggered "
5792 "automatically by HP's Array Configuration Utility (either the GUI or the "
5793 "command-line variety); thus, for logical drive changes, the user should not "
5794 "normally have to use this attribute. This attribute may be useful when hot "
5795 "plugging devices like tape drives, or entire storage boxes containing "
5796 "preconfigured logical drives."
5800 #: build/C/man4/hpsa.4:93
5802 msgid "I</sys/class/scsi_host/host*/firmware_revision>"
5806 #: build/C/man4/hpsa.4:96
5807 msgid "This attribute contains the firmware version of the Smart Array."
5811 #: build/C/man4/hpsa.4:98
5812 msgid "For example:"
5816 #: build/C/man4/hpsa.4:103
5819 " # B<cd /sys/class/scsi_host/host4>\n"
5820 " # B<cat firmware_revision>\n"
5825 #: build/C/man4/hpsa.4:104
5827 msgid "HPSA-specific disk attribute files in /sys"
5831 #: build/C/man4/hpsa.4:105
5833 msgid "I</sys/class/scsi_disk/c:b:t:l/device/unique_id>"
5837 #: build/C/man4/hpsa.4:108
5838 msgid "This attribute contains a 32 hex-digit unique ID for each logical drive."
5842 #: build/C/man4/hpsa.4:111 build/C/man4/hpsa.4:122 build/C/man4/hpsa.4:136
5844 msgid "For example:\n"
5848 #: build/C/man4/hpsa.4:115
5851 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5852 " # B<cat unique_id>\n"
5853 " 600508B1001044395355323037570F77\n"
5857 #: build/C/man4/hpsa.4:116
5859 msgid "I</sys/class/scsi_disk/c:b:t:l/device/raid_level>"
5863 #: build/C/man4/hpsa.4:119
5864 msgid "This attribute contains the RAID level of each logical drive."
5868 #: build/C/man4/hpsa.4:126
5871 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5872 " # B<cat raid_level>\n"
5877 #: build/C/man4/hpsa.4:127
5879 msgid "I</sys/class/scsi_disk/c:b:t:l/device/lunid>"
5883 #: build/C/man4/hpsa.4:133
5885 "This attribute contains the 16 hex-digit (8 byte) LUN ID by which a logical "
5886 "drive or physical device can be addressed. I<c>:I<b>:I<t>:I<l> are the "
5887 "controller, bus, target, and lun of the device."
5891 #: build/C/man4/hpsa.4:140
5894 " # B<cd /sys/class/scsi_disk/4:0:0:0/device>\n"
5896 " 0x0000004000000000\n"
5900 #: build/C/man4/hpsa.4:141
5902 msgid "Supported ioctl() operations"
5906 #: build/C/man4/hpsa.4:153
5908 "For compatibility with applications written for the B<cciss>(4) driver, "
5909 "many, but not all of the ioctls supported by the B<cciss>(4) driver are "
5910 "also supported by the B<hpsa> driver. The data structures used by these "
5911 "ioctls are described in the Linux kernel source file "
5912 "I<include/linux/cciss_ioctl.h>."
5916 #: build/C/man4/hpsa.4:153
5918 msgid "B<CCISS_DEREGDISK>, B<CCISS_REGNEWDISK>, B<CCISS_REGNEWD>"
5922 #: build/C/man4/hpsa.4:159
5924 "These three ioctls all do exactly the same thing, which is to cause the "
5925 "driver to rescan for new devices. This does exactly the same thing as "
5926 "writing to the hpsa-specific host \"rescan\" attribute."
5930 #: build/C/man4/hpsa.4:159
5932 msgid "B<CCISS_GETPCIINFO>"
5936 #: build/C/man4/hpsa.4:162
5938 "Returns PCI domain, bus, device and function and \"board ID\" (PCI subsystem "
5943 #: build/C/man4/hpsa.4:162
5945 msgid "B<CCISS_GETDRIVVER>"
5949 #: build/C/man4/hpsa.4:165
5950 msgid "Returns driver version in three bytes encoded as:"
5954 #: build/C/man4/hpsa.4:168
5957 " (major_version E<lt>E<lt> 16) | (minor_version E<lt>E<lt> 8) |\n"
5958 " (subminor_version)\n"
5962 #: build/C/man4/hpsa.4:168
5964 msgid "B<CCISS_PASSTHRU>, B<CCISS_BIG_PASSTHRU>"
5968 #: build/C/man4/hpsa.4:179
5970 "Allows \"BMIC\" and \"CISS\" commands to be passed through to the Smart "
5971 "Array. These are used extensively by the HP Array Configuration Utility, "
5972 "SNMP storage agents, and so on. See I<cciss_vol_status> at E<.UR "
5973 "http://cciss.sf.net> E<.UE> for some examples."
5977 #: build/C/man4/hpsa.4:186
5979 "B<cciss>(4), B<sd>(4), B<st>(4), B<cciss_vol_status>(8), B<hpacucli>(8), "
5984 #. Don Brace, Steve Cameron, Tom Lawler, Mike Miller, Scott Teel
5985 #. and probably some other people.
5987 #: build/C/man4/hpsa.4:197
5989 "E<.UR http://cciss.sf.net> E<.UE ,> and I<Documentation/scsi/hpsa.txt> and "
5990 "I<Documentation/ABI/testing/sysfs-bus-pci-devices-cciss> in the Linux kernel "
5995 #: build/C/man4/initrd.4:35
6001 #: build/C/man4/initrd.4:35 build/C/man4/st.4:25
6007 #: build/C/man4/initrd.4:38
6008 msgid "initrd - boot loader initialized RAM disk"
6012 #: build/C/man4/initrd.4:51
6014 "The I</dev/initrd> is a read-only block device assigned major number 1 and "
6015 "minor number 250. Typically I</dev/initrd> is owned by I<root.disk> with "
6016 "mode 0400 (read access by root only). If the Linux system does not have "
6017 "I</dev/initrd> already created, it can be created with the following "
6022 #: build/C/man4/initrd.4:56
6026 " mknod -m 400 /dev/initrd b 1 250\n"
6027 " chown root:disk /dev/initrd>\n"
6032 #: build/C/man4/initrd.4:71
6034 "Also, support for both \"RAM disk\" and \"Initial RAM disk\" (e.g., "
6035 "B<CONFIG_BLK_DEV_RAM=y> and B<CONFIG_BLK_DEV_INITRD=y>) must be compiled "
6036 "directly into the Linux kernel to use I</dev/initrd>. When using "
6037 "I</dev/initrd>, the RAM disk driver cannot be loaded as a module."
6041 #: build/C/man4/initrd.4:80
6043 "The special file I</dev/initrd> is a read-only block device. This device is "
6044 "a RAM disk that is initialized (e.g., loaded) by the boot loader before the "
6045 "kernel is started. The kernel then can use I</dev/initrd>'s contents for a "
6046 "two-phase system boot-up."
6050 #: build/C/man4/initrd.4:93
6052 "In the first boot-up phase, the kernel starts up and mounts an initial root "
6053 "filesystem from the contents of I</dev/initrd> (e.g., RAM disk initialized "
6054 "by the boot loader). In the second phase, additional drivers or other "
6055 "modules are loaded from the initial root device's contents. After loading "
6056 "the additional modules, a new root filesystem (i.e., the normal root "
6057 "filesystem) is mounted from a different device."
6061 #: build/C/man4/initrd.4:93
6063 msgid "Boot-up operation"
6067 #: build/C/man4/initrd.4:97
6068 msgid "When booting up with B<initrd>, the system boots as follows:"
6072 #: build/C/man4/initrd.4:101
6074 "The boot loader loads the kernel program and I</dev/initrd>'s contents into "
6079 #: build/C/man4/initrd.4:109
6081 "On kernel startup, the kernel uncompresses and copies the contents of the "
6082 "device I</dev/initrd> onto device I</dev/ram0> and then frees the memory "
6083 "used by I</dev/initrd>."
6087 #: build/C/man4/initrd.4:109 build/C/man4/initrd.4:339 build/C/man4/initrd.4:458 build/C/man4/st.4:919
6093 #: build/C/man4/initrd.4:113
6095 "The kernel then read-write mounts the device I</dev/ram0> as the initial "
6100 #: build/C/man4/initrd.4:113 build/C/man4/initrd.4:343 build/C/man4/st.4:926
6106 #: build/C/man4/initrd.4:118
6108 "If the indicated normal root filesystem is also the initial root filesystem "
6109 "(e.g., I</dev/ram0>) then the kernel skips to the last step for the usual "
6114 #: build/C/man4/initrd.4:118 build/C/man4/initrd.4:349 build/C/man4/st.4:931
6120 #: build/C/man4/initrd.4:130
6122 "If the executable file I</linuxrc> is present in the initial root "
6123 "filesystem, I</linuxrc> is executed with UID 0. (The file I</linuxrc> must "
6124 "have executable permission. The file I</linuxrc> can be any valid "
6125 "executable, including a shell script.)"
6129 #: build/C/man4/initrd.4:130 build/C/man4/initrd.4:358
6135 #: build/C/man4/initrd.4:142
6137 "If I</linuxrc> is not executed or when I</linuxrc> terminates, the normal "
6138 "root filesystem is mounted. (If I</linuxrc> exits with any filesystems "
6139 "mounted on the initial root filesystem, then the behavior of the kernel is "
6140 "B<UNSPECIFIED>. See the NOTES section for the current kernel behavior.)"
6144 #: build/C/man4/initrd.4:142 build/C/man4/initrd.4:360
6150 #: build/C/man4/initrd.4:173
6152 "If the normal root filesystem has a directory I</initrd>, the device "
6153 "I</dev/ram0> is moved from I</> to I</initrd>. Otherwise, if the directory "
6154 "I</initrd> does not exist, the device I</dev/ram0> is unmounted. (When "
6155 "moved from I</> to I</initrd>, I</dev/ram0> is not unmounted and therefore "
6156 "processes can remain running from I</dev/ram0>. If directory I</initrd> "
6157 "does not exist on the normal root filesystem and any processes remain "
6158 "running from I</dev/ram0> when I</linuxrc> exits, the behavior of the kernel "
6159 "is B<UNSPECIFIED>. See the NOTES section for the current kernel behavior.)"
6163 #: build/C/man4/initrd.4:173 build/C/man4/initrd.4:363
6169 #: build/C/man4/initrd.4:180
6171 "The usual boot sequence (e.g., invocation of I</sbin/init>) is performed on "
6172 "the normal root filesystem."
6176 #: build/C/man4/initrd.4:184
6178 "The following boot loader options, when used with B<initrd>, affect the "
6179 "kernel's boot-up operation:"
6183 #: build/C/man4/initrd.4:184
6185 msgid "B<initrd=>I<filename>"
6189 #: build/C/man4/initrd.4:199
6191 "Specifies the file to load as the contents of I</dev/initrd>. For "
6192 "B<LOADLIN> this is a command-line option. For B<LILO> you have to use this "
6193 "command in the B<LILO> configuration file I</etc/lilo.config>. The filename "
6194 "specified with this option will typically be a gzipped filesystem image."
6198 #: build/C/man4/initrd.4:199
6204 #: build/C/man4/initrd.4:214
6206 "This boot option disables the two-phase boot-up operation. The kernel "
6207 "performs the usual boot sequence as if I</dev/initrd> was not initialized. "
6208 "With this option, any contents of I</dev/initrd> loaded into memory by the "
6209 "boot loader contents are preserved. This option permits the contents of "
6210 "I</dev/initrd> to be any data and need not be limited to a filesystem "
6211 "image. However, device I</dev/initrd> is read-only and can be read only one "
6212 "time after system startup."
6216 #: build/C/man4/initrd.4:214
6218 msgid "B<root=>I<device-name>"
6222 #: build/C/man4/initrd.4:232
6224 "Specifies the device to be used as the normal root filesystem. For "
6225 "B<LOADLIN> this is a command-line option. For B<LILO> this is a boot time "
6226 "option or can be used as an option line in the B<LILO> configuration file "
6227 "I</etc/lilo.config>. The device specified by the this option must be a "
6228 "mountable device having a suitable root filesystem."
6232 #: build/C/man4/initrd.4:232
6234 msgid "Changing the normal root filesystem"
6238 #: build/C/man4/initrd.4:252
6240 "By default, the kernel's settings (e.g., set in the kernel file with "
6241 "B<rdev>(8) or compiled into the kernel file), or the boot loader option "
6242 "setting is used for the normal root filesystems. For an NFS-mounted normal "
6243 "root filesystem, one has to use the B<nfs_root_name> and B<nfs_root_addrs> "
6244 "boot options to give the NFS settings. For more information on NFS-mounted "
6245 "root see the kernel documentation file "
6246 "B<Documentation/filesystems/nfsroot.txt>. For more information on setting "
6247 "the root filesystem see also the B<LILO> and B<LOADLIN> documentation."
6251 #: build/C/man4/initrd.4:284
6253 "It is also possible for the I</linuxrc> executable to change the normal root "
6254 "device. For I</linuxrc> to change the normal root device, I</proc> must be "
6255 "mounted. After mounting I</proc>, I</linuxrc> changes the normal root "
6256 "device by writing into the proc files I</proc/sys/kernel/real-root-dev>, "
6257 "I</proc/sys/kernel/nfs-root-name>, and I</proc/sys/kernel/nfs-root-addrs>. "
6258 "For a physical root device, the root device is changed by having I</linuxrc> "
6259 "write the new root filesystem device number into "
6260 "I</proc/sys/kernel/real-root-dev>. For an NFS root filesystem, the root "
6261 "device is changed by having I</linuxrc> write the NFS setting into files "
6262 "I</proc/sys/kernel/nfs-root-name> and I</proc/sys/kernel/nfs-root-addrs> and "
6263 "then writing 0xff (e.g., the pseudo-NFS-device number) into file "
6264 "I</proc/sys/kernel/real-root-dev>. For example, the following shell command "
6265 "line would change the normal root device to I</dev/hdb1>:"
6269 #: build/C/man4/initrd.4:287
6271 msgid " echo 0x365 E<gt>/proc/sys/kernel/real-root-dev\n"
6275 #: build/C/man4/initrd.4:294
6277 "For an NFS example, the following shell command lines would change the "
6278 "normal root device to the NFS directory I</var/nfsroot> on a local networked "
6279 "NFS server with IP number 193.8.232.7 for a system with IP number "
6280 "193.8.232.2 and named \"idefix\":"
6284 #: build/C/man4/initrd.4:300
6287 " echo /var/nfsroot E<gt>/proc/sys/kernel/nfs-root-name\n"
6288 " echo 193.8.232.2:193.8.232.7::255.255.255.0:idefix \\e\n"
6289 " E<gt>/proc/sys/kernel/nfs-root-addrs\n"
6290 " echo 255 E<gt>/proc/sys/kernel/real-root-dev\n"
6293 #. FIXME the manual page should describe the pivot_root mechanism.
6295 #: build/C/man4/initrd.4:317
6297 "B<Note>: The use of I</proc/sys/kernel/real-root-dev> to change the root "
6298 "filesystem is obsolete. See the Linux kernel source file "
6299 "I<Documentation/initrd.txt> as well as B<pivot_root>(2) and "
6300 "B<pivot_root>(8) for information on the modern method of changing the root "
6305 #: build/C/man4/initrd.4:317 build/C/man4/random.4:65 build/C/man7/uri.7:109
6311 #: build/C/man4/initrd.4:321
6313 "The main motivation for implementing B<initrd> was to allow for modular "
6314 "kernel configuration at system installation."
6318 #: build/C/man4/initrd.4:323
6319 msgid "A possible system installation scenario is as follows:"
6323 #: build/C/man4/initrd.4:331
6325 "The loader program boots from floppy or other media with a minimal kernel "
6326 "(e.g., support for I</dev/ram>, I</dev/initrd>, and the ext2 filesystem) and "
6327 "loads I</dev/initrd> with a gzipped version of the initial filesystem."
6331 #: build/C/man4/initrd.4:339
6333 "The executable I</linuxrc> determines what is needed to (1) mount the normal "
6334 "root filesystem (i.e., device type, device drivers, filesystem) and (2) the "
6335 "distribution media (e.g., CD-ROM, network, tape, ...). This can be done by "
6336 "asking the user, by auto-probing, or by using a hybrid approach."
6340 #: build/C/man4/initrd.4:343
6342 "The executable I</linuxrc> loads the necessary modules from the initial root "
6347 #: build/C/man4/initrd.4:349
6349 "The executable I</linuxrc> creates and populates the root filesystem. (At "
6350 "this stage the normal root filesystem does not have to be a completed system "
6355 #: build/C/man4/initrd.4:358
6357 "The executable I</linuxrc> sets I</proc/sys/kernel/real-root-dev>, unmount "
6358 "I</proc>, the normal root filesystem and any other filesystems it has "
6359 "mounted, and then terminates."
6363 #: build/C/man4/initrd.4:360
6364 msgid "The kernel then mounts the normal root filesystem."
6368 #: build/C/man4/initrd.4:363
6370 "Now that the filesystem is accessible and intact, the boot loader can be "
6375 #: build/C/man4/initrd.4:372
6377 "The boot loader is configured to load into I</dev/initrd> a filesystem with "
6378 "the set of modules that was used to bring up the system. (e.g., Device "
6379 "I</dev/ram0> can be modified, then unmounted, and finally, the image is "
6380 "written from I</dev/ram0> to a file.)"
6384 #: build/C/man4/initrd.4:372
6390 #: build/C/man4/initrd.4:375
6392 "The system is now bootable and additional installation tasks can be "
6397 #: build/C/man4/initrd.4:381
6399 "The key role of I</dev/initrd> in the above is to reuse the configuration "
6400 "data during normal system operation without requiring initial kernel "
6401 "selection, a large generic kernel or, recompiling the kernel."
6405 #: build/C/man4/initrd.4:394
6407 "A second scenario is for installations where Linux runs on systems with "
6408 "different hardware configurations in a single administrative network. In "
6409 "such cases, it may be desirable to use only a small set of kernels (ideally "
6410 "only one) and to keep the system-specific part of configuration information "
6411 "as small as possible. In this case, create a common file with all needed "
6412 "modules. Then, only the I</linuxrc> file or a file executed by I</linuxrc> "
6413 "would be different."
6417 #: build/C/man4/initrd.4:401
6419 "A third scenario is more convenient recovery disks. Because information "
6420 "like the location of the root filesystem partition is not needed at boot "
6421 "time, the system loaded from I</dev/initrd> can use a dialog and/or "
6422 "auto-detection followed by a possible sanity check."
6426 #: build/C/man4/initrd.4:418
6428 "Last but not least, Linux distributions on CD-ROM may use B<initrd> for easy "
6429 "installation from the CD-ROM. The distribution can use B<LOADLIN> to "
6430 "directly load I</dev/initrd> from CD-ROM without the need of any floppies. "
6431 "The distribution could also use a B<LILO> boot floppy and then bootstrap a "
6432 "bigger RAM disk via I</dev/initrd> from the CD-ROM."
6436 #: build/C/man4/initrd.4:420
6437 msgid "I</dev/initrd>"
6441 #: build/C/man4/initrd.4:422
6442 msgid "I</dev/ram0>"
6446 #: build/C/man4/initrd.4:424
6451 #: build/C/man4/initrd.4:429
6456 #: build/C/man4/initrd.4:441
6458 "With the current kernel, any filesystems that remain mounted when "
6459 "I</dev/ram0> is moved from I</> to I</initrd> continue to be accessible. "
6460 "However, the I</proc/mounts> entries are not updated."
6464 #: build/C/man4/initrd.4:458
6466 "With the current kernel, if directory I</initrd> does not exist, then "
6467 "I</dev/ram0> will B<not> be fully unmounted if I</dev/ram0> is used by any "
6468 "process or has any filesystem mounted on it. If I</dev/ram0> is B<not> "
6469 "fully unmounted, then I</dev/ram0> will remain in memory."
6476 #. The kernel code for device
6478 #. was written by Werner Almesberger <almesber@lrc.epfl.ch> and
6479 #. Hans Lermen <lermen@elserv.ffm.fgan.de>.
6482 #. was added to the baseline Linux kernel in development version 1.3.73.
6484 #: build/C/man4/initrd.4:474
6486 "Users of I</dev/initrd> should not depend on the behavior give in the above "
6487 "notes. The behavior may change in future versions of the Linux kernel."
6491 #: build/C/man4/initrd.4:480
6492 msgid "B<chown>(1), B<mknod>(1), B<ram>(4), B<freeramdisk>(8), B<rdev>(8)"
6496 #: build/C/man4/initrd.4:484
6498 "I<Documentation/initrd.txt> in the Linux kernel source tree, the LILO "
6499 "documentation, the LOADLIN documentation, the SYSLINUX documentation"
6503 #: build/C/man4/lp.4:27
6509 #: build/C/man4/lp.4:27
6515 #: build/C/man4/lp.4:30
6516 msgid "lp - line printer devices"
6520 #: build/C/man4/lp.4:32
6521 msgid "B<#include E<lt>linux/lp.hE<gt>>"
6525 #: build/C/man4/lp.4:43
6527 "B<lp>[0\\(en2] are character devices for the parallel line printers; they "
6528 "have major number 6 and minor number 0\\(en2. The minor numbers correspond "
6529 "to the printer port base addresses 0x03bc, 0x0378 and 0x0278. Usually they "
6530 "have mode 220 and are owned by root and group lp. You can use printer ports "
6531 "either with polling or with interrupts. Interrupts are recommended when "
6532 "high traffic is expected, for example, for laser printers. For usual dot "
6533 "matrix printers polling will usually be enough. The default is polling."
6537 #: build/C/man4/lp.4:47
6538 msgid "The following B<ioctl>(2) calls are supported:"
6542 #: build/C/man4/lp.4:47
6544 msgid "B<int ioctl(int >I<fd>B<, LPTIME, int >I<arg>B<)>"
6548 #: build/C/man4/lp.4:56
6550 "Sets the amount of time that the driver sleeps before rechecking the printer "
6551 "when the printer's buffer appears to be filled to I<arg>. If you have a "
6552 "fast printer, decrease this number; if you have a slow printer, then "
6553 "increase it. This is in hundredths of a second, the default 2 being 0.02 "
6554 "seconds. It only influences the polling driver."
6558 #: build/C/man4/lp.4:56
6560 msgid "B<int ioctl(int >I<fd>B<, LPCHAR, int >I<arg>B<)>"
6564 #: build/C/man4/lp.4:64
6566 "Sets the maximum number of busy-wait iterations which the polling driver "
6567 "does while waiting for the printer to get ready for receiving a character to "
6568 "I<arg>. If printing is too slow, increase this number; if the system gets "
6569 "too slow, decrease this number. The default is 1000. It only influences "
6570 "the polling driver."
6574 #: build/C/man4/lp.4:64
6576 msgid "B<int ioctl(int >I<fd>B<, LPABORT, int >I<arg>B<)>"
6580 #: build/C/man4/lp.4:70
6582 "If I<arg> is 0, the printer driver will retry on errors, otherwise it will "
6583 "abort. The default is 0."
6587 #: build/C/man4/lp.4:70
6589 msgid "B<int ioctl(int >I<fd>B<, LPABORTOPEN, int >I<arg>B<)>"
6593 #: build/C/man4/lp.4:77
6595 "If I<arg> is 0, B<open>(2) will be aborted on error, otherwise error will "
6596 "be ignored. The default is to ignore it."
6600 #: build/C/man4/lp.4:77
6602 msgid "B<int ioctl(int >I<fd>B<, LPCAREFUL, int >I<arg>B<)>"
6606 #: build/C/man4/lp.4:83
6608 "If I<arg> is 0, then the out-of-paper, offline and error signals are "
6609 "required to be false on all writes, otherwise they are ignored. The default "
6610 "is to ignore them."
6614 #: build/C/man4/lp.4:83
6616 msgid "B<int ioctl(int >I<fd>B<, LPWAIT, int >I<arg>B<)>"
6620 #: build/C/man4/lp.4:94
6622 "Sets the number of busy waiting iterations to wait before strobing the "
6623 "printer to accept a just-written character, and the number of iterations to "
6624 "wait before turning the strobe off again, to I<arg>. The specification says "
6625 "this time should be 0.5 microseconds, but experience has shown the delay "
6626 "caused by the code is already enough. For that reason, the default value is "
6627 "0. This is used for both the polling and the interrupt driver."
6631 #: build/C/man4/lp.4:94
6633 msgid "B<int ioctl(int >I<fd>B<, LPSETIRQ, int >I<arg>B<)>"
6637 #: build/C/man4/lp.4:105
6639 "This B<ioctl>(2) requires superuser privileges. It takes an I<int> "
6640 "containing the new IRQ as argument. As a side effect, the printer will be "
6641 "reset. When I<arg> is 0, the polling driver will be used, which is also "
6646 #: build/C/man4/lp.4:105
6648 msgid "B<int ioctl(int >I<fd>B<, LPGETIRQ, int *>I<arg>B<)>"
6652 #: build/C/man4/lp.4:108
6653 msgid "Stores the currently used IRQ in I<arg>."
6657 #: build/C/man4/lp.4:108
6659 msgid "B<int ioctl(int >I<fd>B<, LPGETSTATUS, int *>I<arg>B<)>"
6663 #: build/C/man4/lp.4:112
6665 "Stores the value of the status port in I<arg>. The bits have the following "
6670 #: build/C/man4/lp.4:114
6672 msgid "LP_PBUSY\tinverted busy input, active high\n"
6676 #: build/C/man4/lp.4:115
6678 msgid "LP_PACK\tunchanged acknowledge input, active low\n"
6682 #: build/C/man4/lp.4:116
6684 msgid "LP_POUTPA\tunchanged out-of-paper input, active high\n"
6688 #: build/C/man4/lp.4:117
6690 msgid "LP_PSELECD\tunchanged selected input, active high\n"
6694 #: build/C/man4/lp.4:118
6696 msgid "LP_PERRORP\tunchanged error input, active low\n"
6700 #: build/C/man4/lp.4:123
6702 "Refer to your printer manual for the meaning of the signals. Note that "
6703 "undocumented bits may also be set, depending on your printer."
6707 #: build/C/man4/lp.4:123
6709 msgid "B<int ioctl(int >I<fd>B<, LPRESET)>"
6713 #: build/C/man4/lp.4:126
6714 msgid "Resets the printer. No argument is used."
6718 #. The printer driver was originally written by Jim Weigand and Linus
6720 #. It was further improved by Michael K.\& Johnson.
6721 #. The interrupt code was written by Nigel Gamble.
6722 #. Alan Cox modularized it.
6723 #. LPCAREFUL, LPABORT, LPGETSTATUS were added by Chris Metcalf.
6725 #: build/C/man4/lp.4:135
6730 #: build/C/man4/lp.4:141
6731 msgid "B<chmod>(1), B<chown>(1), B<mknod>(1), B<lpcntl>(8), B<tunelp>(8)"
6735 #: build/C/man3/makedev.3:26
6741 #: build/C/man3/makedev.3:26
6747 #: build/C/man3/makedev.3:29
6748 msgid "makedev, major, minor - manage a device number"
6752 #: build/C/man3/makedev.3:33
6755 "B<#define _BSD_SOURCE> /* See feature_test_macros(7) */\n"
6756 "B<#include E<lt>sys/types.hE<gt>>\n"
6760 #: build/C/man3/makedev.3:35
6762 msgid "B<dev_t makedev(int >I<maj>B<, int >I<min>B<);>\n"
6766 #: build/C/man3/makedev.3:38
6769 "B<unsigned int major(dev_t >I<dev>B<);>\n"
6770 "B<unsigned int minor(dev_t >I<dev>B<);>\n"
6774 #: build/C/man3/makedev.3:45
6776 "A device ID consists of two parts: a major ID, identifying the class of the "
6777 "device, and a minor ID, identifying a specific instance of a device in that "
6778 "class. A device ID is represented using the type I<dev_t>."
6782 #: build/C/man3/makedev.3:52
6784 "Given major and minor device IDs, B<makedev>() combines these to produce a "
6785 "device ID, returned as the function result. This device ID can be given to "
6786 "B<mknod>(2), for example."
6790 #: build/C/man3/makedev.3:62
6792 "The B<major>() and B<minor>() functions perform the converse task: given a "
6793 "device ID, they return, respectively, the major and minor components. These "
6794 "macros can be useful to, for example, decompose the device IDs in the "
6795 "structure returned by B<stat>(2)."
6798 #. The BSDs, HP-UX, Solaris, AIX, Irix
6800 #: build/C/man3/makedev.3:71
6802 "The B<makedev>(), B<major>(), and B<minor>() functions are not specified in "
6803 "POSIX.1, but are present on many other systems."
6807 #: build/C/man3/makedev.3:80
6809 "These interfaces are defined as macros. Since glibc 2.3.3, they have been "
6810 "aliases for three GNU-specific functions: B<gnu_dev_makedev>(), "
6811 "B<gnu_dev_major>(), and B<gnu_dev_minor>(). The latter names are exported, "
6812 "but the traditional names are more portable."
6816 #: build/C/man3/makedev.3:83
6817 msgid "B<mknod>(2), B<stat>(2)"
6821 #: build/C/man4/mem.4:26
6827 #: build/C/man4/mem.4:26 build/C/man4/ram.4:26
6833 #: build/C/man4/mem.4:29
6834 msgid "mem, kmem, port - system memory, kernel memory and system ports"
6838 #: build/C/man4/mem.4:34
6840 "B<mem> is a character device file that is an image of the main memory of the "
6841 "computer. It may be used, for example, to examine (and even patch) the "
6846 #: build/C/man4/mem.4:39
6848 "Byte addresses in B<mem> are interpreted as physical memory addresses. "
6849 "References to nonexistent locations cause errors to be returned."
6853 #: build/C/man4/mem.4:42
6855 "Examining and patching is likely to lead to unexpected results when "
6856 "read-only or write-only bits are present."
6860 #: build/C/man4/mem.4:44 build/C/man4/mem.4:59 build/C/man4/mem.4:72 build/C/man4/ram.4:35
6861 msgid "It is typically created by:"
6865 #: build/C/man4/mem.4:47
6866 msgid "mknod -m 660 /dev/mem c 1 1"
6870 #: build/C/man4/mem.4:49
6871 msgid "chown root:kmem /dev/mem"
6875 #: build/C/man4/mem.4:57
6877 "The file B<kmem> is the same as B<mem>, except that the kernel virtual "
6878 "memory rather than physical memory is accessed."
6882 #: build/C/man4/mem.4:62
6883 msgid "mknod -m 640 /dev/kmem c 1 2"
6887 #: build/C/man4/mem.4:64
6888 msgid "chown root:kmem /dev/kmem"
6892 #: build/C/man4/mem.4:70
6893 msgid "B<port> is similar to B<mem>, but the I/O ports are accessed."
6897 #: build/C/man4/mem.4:75
6898 msgid "mknod -m 660 /dev/port c 1 4"
6902 #: build/C/man4/mem.4:77
6903 msgid "chown root:mem /dev/port"
6907 #: build/C/man4/mem.4:80
6912 #: build/C/man4/mem.4:82
6913 msgid "I</dev/kmem>"
6917 #: build/C/man4/mem.4:84
6918 msgid "I</dev/port>"
6922 #: build/C/man4/mem.4:88
6923 msgid "B<chown>(1), B<mknod>(1), B<ioperm>(2)"
6927 #: build/C/man3/mkfifo.3:28
6933 #: build/C/man3/mkfifo.3:28
6939 #: build/C/man3/mkfifo.3:28
6945 #: build/C/man3/mkfifo.3:31
6946 msgid "mkfifo, mkfifoat - make a FIFO special file (a named pipe)"
6950 #: build/C/man3/mkfifo.3:35
6953 "B<#include E<lt>sys/types.hE<gt>>\n"
6954 "B<#include E<lt>sys/stat.hE<gt>>\n"
6958 #: build/C/man3/mkfifo.3:37
6960 msgid "B<int mkfifo(const char *>I<pathname>B<, mode_t >I<mode>B<);>\n"
6964 #: build/C/man3/mkfifo.3:40 build/C/man2/mknod.2:29
6967 "B<#include E<lt>fcntl.hE<gt> >/* Definition of AT_* constants */\n"
6968 "B<#include E<lt>sys/stat.hE<gt>>\n"
6972 #: build/C/man3/mkfifo.3:42
6975 "B<int mkfifoat(int >I<dirfd>B<, const char *>I<pathname>B<, mode_t "
6980 #: build/C/man3/mkfifo.3:47 build/C/man2/mknod.2:37 build/C/man3/syslog.3:55
6981 msgid "Feature Test Macro Requirements for glibc (see B<feature_test_macros>(7)):"
6985 #: build/C/man3/mkfifo.3:50
6986 msgid "B<mkfifoat>():"
6990 #: build/C/man3/mkfifo.3:53
6992 msgid "Since glibc 2.10:"
6996 #: build/C/man3/mkfifo.3:56
6997 msgid "_XOPEN_SOURCE\\ E<gt>=\\ 700 || _POSIX_C_SOURCE\\ E<gt>=\\ 200809L"
7001 #: build/C/man3/mkfifo.3:56
7003 msgid "Before glibc 2.10:"
7007 #: build/C/man3/mkfifo.3:59
7008 msgid "_ATFILE_SOURCE"
7012 #: build/C/man3/mkfifo.3:69
7014 "B<mkfifo>() makes a FIFO special file with name I<pathname>. I<mode> "
7015 "specifies the FIFO's permissions. It is modified by the process's B<umask> "
7016 "in the usual way: the permissions of the created file are B<(>I<mode>B< & "
7021 #: build/C/man3/mkfifo.3:76
7023 "A FIFO special file is similar to a pipe, except that it is created in a "
7024 "different way. Instead of being an anonymous communications channel, a FIFO "
7025 "special file is entered into the filesystem by calling B<mkfifo>()."
7029 #: build/C/man3/mkfifo.3:86
7031 "Once you have created a FIFO special file in this way, any process can open "
7032 "it for reading or writing, in the same way as an ordinary file. However, it "
7033 "has to be open at both ends simultaneously before you can proceed to do any "
7034 "input or output operations on it. Opening a FIFO for reading normally "
7035 "blocks until some other process opens the same FIFO for writing, and vice "
7036 "versa. See B<fifo>(7) for nonblocking handling of FIFO special files."
7040 #: build/C/man3/mkfifo.3:86
7046 #: build/C/man3/mkfifo.3:92
7048 "The B<mkfifoat>() function operates in exactly the same way as B<mkfifo>(), "
7049 "except for the differences described here."
7053 #: build/C/man3/mkfifo.3:102
7055 "If the pathname given in I<pathname> is relative, then it is interpreted "
7056 "relative to the directory referred to by the file descriptor I<dirfd> "
7057 "(rather than relative to the current working directory of the calling "
7058 "process, as is done by B<mkfifo>() for a relative pathname)."
7062 #: build/C/man3/mkfifo.3:114
7064 "If I<pathname> is relative and I<dirfd> is the special value B<AT_FDCWD>, "
7065 "then I<pathname> is interpreted relative to the current working directory of "
7066 "the calling process (like B<mkfifo>())."
7070 #: build/C/man3/mkfifo.3:120 build/C/man2/mknod.2:144
7071 msgid "If I<pathname> is absolute, then I<dirfd> is ignored."
7075 #: build/C/man3/mkfifo.3:128
7077 "On success B<mkfifo>() and B<mkfifoat>() return 0. In the case of an "
7078 "error, -1 is returned (in which case, I<errno> is set appropriately)."
7082 #: build/C/man3/mkfifo.3:129 build/C/man2/mknod.2:157 build/C/man4/st.4:829
7088 #: build/C/man3/mkfifo.3:133
7090 "One of the directories in I<pathname> did not allow search (execute) "
7095 #: build/C/man3/mkfifo.3:133 build/C/man2/mknod.2:165
7101 #: build/C/man3/mkfifo.3:137 build/C/man2/mknod.2:169
7103 "The user's quota of disk blocks or inodes on the filesystem has been "
7108 #: build/C/man3/mkfifo.3:137 build/C/man2/mknod.2:169
7114 #: build/C/man3/mkfifo.3:143 build/C/man2/mknod.2:176
7116 "I<pathname> already exists. This includes the case where I<pathname> is a "
7117 "symbolic link, dangling or not."
7121 #: build/C/man3/mkfifo.3:143 build/C/man2/mknod.2:188
7123 msgid "B<ENAMETOOLONG>"
7127 #: build/C/man3/mkfifo.3:151
7129 "Either the total length of I<pathname> is greater than B<PATH_MAX>, or an "
7130 "individual filename component has a length greater than B<NAME_MAX>. In the "
7131 "GNU system, there is no imposed limit on overall filename length, but some "
7132 "filesystems may place limits on the length of a component."
7136 #: build/C/man3/mkfifo.3:151 build/C/man2/mknod.2:191
7142 #: build/C/man3/mkfifo.3:155 build/C/man2/mknod.2:196
7144 "A directory component in I<pathname> does not exist or is a dangling "
7149 #: build/C/man3/mkfifo.3:155 build/C/man2/mknod.2:199 build/C/man4/st.4:857
7155 #: build/C/man3/mkfifo.3:158
7156 msgid "The directory or filesystem has no room for the new file."
7160 #: build/C/man3/mkfifo.3:158 build/C/man3/mkfifo.3:172 build/C/man2/mknod.2:204 build/C/man2/mknod.2:234
7166 #: build/C/man3/mkfifo.3:162 build/C/man2/mknod.2:209
7167 msgid "A component used as a directory in I<pathname> is not, in fact, a directory."
7171 #: build/C/man3/mkfifo.3:162 build/C/man2/mknod.2:223 build/C/man4/st.4:872
7177 #: build/C/man3/mkfifo.3:165
7178 msgid "I<pathname> refers to a read-only filesystem."
7182 #: build/C/man3/mkfifo.3:168
7183 msgid "The following additional errors can occur for B<mkfifoat>():"
7187 #: build/C/man3/mkfifo.3:172 build/C/man2/mknod.2:234
7188 msgid "I<dirfd> is not a valid file descriptor."
7192 #: build/C/man3/mkfifo.3:178
7194 "I<pathname> is a relative path and I<dirfd> is a file descriptor referring "
7195 "to a file other than a directory."
7199 #: build/C/man3/mkfifo.3:184
7201 "B<mkfifoat>() was added to glibc in version 2.4. It is implemented using "
7202 "B<mknodat>(2), available on Linux since kernel 2.6.16."
7206 #: build/C/man3/mkfifo.3:184 build/C/man3/stdarg.3:229
7212 #: build/C/man3/mkfifo.3:185 build/C/man3/stdarg.3:230
7214 msgid "Multithreading (see pthreads(7))"
7218 #: build/C/man3/mkfifo.3:191
7219 msgid "The B<mkfifo>() and B<mkfifoat>() functions are thread-safe."
7223 #: build/C/man3/mkfifo.3:194
7224 msgid "B<mkfifo>(): POSIX.1-2001, POSIX.1-2008."
7228 #: build/C/man3/mkfifo.3:197
7229 msgid "B<mkfifoat>(): POSIX.1-2008."
7233 #: build/C/man3/mkfifo.3:206
7235 "B<mkfifo>(1), B<close>(2), B<open>(2), B<read>(2), B<stat>(2), B<umask>(2), "
7236 "B<write>(2), B<fifo>(7)"
7240 #: build/C/man2/mknod.2:15
7246 #: build/C/man2/mknod.2:15
7252 #: build/C/man2/mknod.2:18
7253 msgid "mknod, mknodat - create a special or ordinary file"
7257 #: build/C/man2/mknod.2:24
7260 "B<#include E<lt>sys/types.hE<gt>>\n"
7261 "B<#include E<lt>sys/stat.hE<gt>>\n"
7262 "B<#include E<lt>fcntl.hE<gt>>\n"
7263 "B<#include E<lt>unistd.hE<gt>>\n"
7267 #: build/C/man2/mknod.2:26
7270 "B<int mknod(const char *>I<pathname>B<, mode_t >I<mode>B<, dev_t "
7275 #: build/C/man2/mknod.2:32
7278 "B<int mknodat(int >I<dirfd>B<, const char *>I<pathname>B<, mode_t "
7279 ">I<mode>B<, dev_t >I<dev>B<);>\n"
7283 #: build/C/man2/mknod.2:40
7288 #: build/C/man2/mknod.2:44
7290 "_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\\ E<gt>=\\ 500 || "
7291 "_XOPEN_SOURCE\\ &&\\ _XOPEN_SOURCE_EXTENDED"
7295 #: build/C/man2/mknod.2:56
7297 "The system call B<mknod>() creates a filesystem node (file, device special "
7298 "file, or named pipe) named I<pathname>, with attributes specified by I<mode> "
7303 #: build/C/man2/mknod.2:63
7305 "The I<mode> argument specifies both the permissions to use and the type of "
7306 "node to be created. It should be a combination (using bitwise OR) of one of "
7307 "the file types listed below and the permissions for the new node."
7311 #: build/C/man2/mknod.2:68
7313 "The permissions are modified by the process's I<umask> in the usual way: the "
7314 "permissions of the created node are I<(mode & ~umask)>."
7317 #. (S_IFSOCK since Linux 1.2.4)
7319 #: build/C/man2/mknod.2:82
7321 "The file type must be one of B<S_IFREG>, B<S_IFCHR>, B<S_IFBLK>, B<S_IFIFO>, "
7322 "or B<S_IFSOCK> to specify a regular file (which will be created empty), "
7323 "character special file, block special file, FIFO (named pipe), or UNIX "
7324 "domain socket, respectively. (Zero file type is equivalent to type "
7329 #: build/C/man2/mknod.2:95
7331 "If the file type is B<S_IFCHR> or B<S_IFBLK>, then I<dev> specifies the "
7332 "major and minor numbers of the newly created device special file "
7333 "(B<makedev>(3) may be useful to build the value for I<dev>); otherwise it "
7338 #: build/C/man2/mknod.2:101
7340 "If I<pathname> already exists, or is a symbolic link, this call fails with "
7341 "an B<EEXIST> error."
7345 #: build/C/man2/mknod.2:110
7347 "The newly created node will be owned by the effective user ID of the "
7348 "process. If the directory containing the node has the set-group-ID bit set, "
7349 "or if the filesystem is mounted with BSD group semantics, the new node will "
7350 "inherit the group ownership from its parent directory; otherwise it will be "
7351 "owned by the effective group ID of the process."
7355 #: build/C/man2/mknod.2:110
7361 #: build/C/man2/mknod.2:116
7363 "The B<mknodat>() system call operates in exactly the same way as "
7364 "B<mknod>(2), except for the differences described here."
7368 #: build/C/man2/mknod.2:126
7370 "If the pathname given in I<pathname> is relative, then it is interpreted "
7371 "relative to the directory referred to by the file descriptor I<dirfd> "
7372 "(rather than relative to the current working directory of the calling "
7373 "process, as is done by B<mknod>(2) for a relative pathname)."
7377 #: build/C/man2/mknod.2:138
7379 "If I<pathname> is relative and I<dirfd> is the special value B<AT_FDCWD>, "
7380 "then I<pathname> is interpreted relative to the current working directory of "
7381 "the calling process (like B<mknod>(2))."
7385 #: build/C/man2/mknod.2:149
7386 msgid "See B<openat>(2) for an explanation of the need for B<mknodat>()."
7390 #: build/C/man2/mknod.2:156
7392 "B<mknod>() and B<mknodat>() return zero on success, or -1 if an error "
7393 "occurred (in which case, I<errno> is set appropriately)."
7397 #: build/C/man2/mknod.2:165
7399 "The parent directory does not allow write permission to the process, or one "
7400 "of the directories in the path prefix of I<pathname> did not allow search "
7401 "permission. (See also B<path_resolution>(7).)"
7405 #: build/C/man2/mknod.2:176 build/C/man4/st.4:838
7411 #: build/C/man2/mknod.2:179
7412 msgid "I<pathname> points outside your accessible address space."
7416 #: build/C/man2/mknod.2:184
7418 "I<mode> requested creation of something other than a regular file, device "
7419 "special file, FIFO or socket."
7423 #: build/C/man2/mknod.2:184
7429 #: build/C/man2/mknod.2:188
7430 msgid "Too many symbolic links were encountered in resolving I<pathname>."
7434 #: build/C/man2/mknod.2:191
7435 msgid "I<pathname> was too long."
7439 #: build/C/man2/mknod.2:196 build/C/man4/st.4:850
7445 #: build/C/man2/mknod.2:199
7446 msgid "Insufficient kernel memory was available."
7450 #: build/C/man2/mknod.2:204
7451 msgid "The device containing I<pathname> has no room for the new node."
7454 #. For UNIX domain sockets and regular files, EPERM is returned only in
7455 #. Linux 2.2 and earlier; in Linux 2.4 and later, unprivileged can
7456 #. use mknod() to make these files.
7458 #: build/C/man2/mknod.2:223
7460 "I<mode> requested creation of something other than a regular file, FIFO "
7461 "(named pipe), or UNIX domain socket, and the caller is not privileged "
7462 "(Linux: does not have the B<CAP_MKNOD> capability); also returned if the "
7463 "filesystem containing I<pathname> does not support the type of node "
7468 #: build/C/man2/mknod.2:227
7469 msgid "I<pathname> refers to a file on a read-only filesystem."
7473 #: build/C/man2/mknod.2:230
7474 msgid "The following additional errors can occur for B<mknodat>():"
7478 #: build/C/man2/mknod.2:240
7480 "I<pathname> is relative and I<dirfd> is a file descriptor referring to a "
7481 "file other than a directory."
7485 #: build/C/man2/mknod.2:244
7487 "B<mknodat>() was added to Linux in kernel 2.6.16; library support was added "
7488 "to glibc in version 2.4."
7491 #. The Linux version differs from the SVr4 version in that it
7492 #. does not require root permission to create pipes, also in that no
7493 #. EMULTIHOP, ENOLINK, or EINTR error is documented.
7495 #: build/C/man2/mknod.2:250
7496 msgid "B<mknod>(): SVr4, 4.4BSD, POSIX.1-2001 (but see below), POSIX.1-2008."
7500 #: build/C/man2/mknod.2:253
7501 msgid "B<mknodat>(): POSIX.1-2008."
7505 #: build/C/man2/mknod.2:271
7507 "POSIX.1-2001 says: \"The only portable use of B<mknod>() is to create a "
7508 "FIFO-special file. If I<mode> is not B<S_IFIFO> or I<dev> is not 0, the "
7509 "behavior of B<mknod>() is unspecified.\" However, nowadays one should never "
7510 "use B<mknod>() for this purpose; one should use B<mkfifo>(3), a function "
7511 "especially defined for this purpose."
7514 #. and one should make UNIX domain sockets with socket(2) and bind(2).
7516 #: build/C/man2/mknod.2:278
7518 "Under Linux, B<mknod>() cannot be used to create directories. One should "
7519 "make directories with B<mkdir>(2)."
7523 #: build/C/man2/mknod.2:284
7525 "There are many infelicities in the protocol underlying NFS. Some of these "
7526 "affect B<mknod>() and B<mknodat>(2)."
7530 #: build/C/man2/mknod.2:297
7532 "B<chmod>(2), B<chown>(2), B<fcntl>(2), B<mkdir>(2), B<mount>(2), "
7533 "B<socket>(2), B<stat>(2), B<umask>(2), B<unlink>(2), B<makedev>(3), "
7534 "B<mkfifo>(3), B<path_resolution>(7)"
7538 #: build/C/man4/mouse.4:26
7544 #: build/C/man4/mouse.4:26
7550 #: build/C/man4/mouse.4:29
7551 msgid "mouse - serial mouse interface"
7555 #: build/C/man4/mouse.4:33
7557 "Serial mice are connected to a serial RS232/V24 dialout line, see B<ttyS>(4) "
7558 "for a description."
7562 #: build/C/man4/mouse.4:34
7564 msgid "Introduction"
7568 #: build/C/man4/mouse.4:36
7569 msgid "The pinout of the usual 9 pin plug as used for serial mice is:"
7573 #: build/C/man4/mouse.4:39
7575 msgid "pin\tname\tused for\n"
7579 #: build/C/man4/mouse.4:40
7581 msgid "2\tRX\tData\n"
7585 #: build/C/man4/mouse.4:41
7587 msgid "3\tTX\t-12 V, Imax = 10 mA\n"
7591 #: build/C/man4/mouse.4:42
7593 msgid "4\tDTR\t+12 V, Imax = 10 mA\n"
7597 #: build/C/man4/mouse.4:43
7599 msgid "7\tRTS\t+12 V, Imax = 10 mA\n"
7603 #: build/C/man4/mouse.4:44
7605 msgid "5\tGND\tGround\n"
7609 #: build/C/man4/mouse.4:48
7610 msgid "This is the specification, in fact 9 V suffices with most mice."
7614 #: build/C/man4/mouse.4:54
7616 "The mouse driver can recognize a mouse by dropping RTS to low and raising it "
7617 "again. About 14 ms later the mouse will send 0x4D (\\(aqM\\(aq) on the data "
7618 "line. After a further 63 ms, a Microsoft-compatible 3-button mouse will "
7619 "send 0x33 (\\(aq3\\(aq)."
7623 #: build/C/man4/mouse.4:66
7625 "The relative mouse movement is sent as I<dx> (positive means right) and "
7626 "I<dy> (positive means down). Various mice can operate at different speeds. "
7627 "To select speeds, cycle through the speeds 9600, 4800, 2400, and 1200 bit/s, "
7628 "each time writing the two characters from the table below and waiting 0.1 "
7629 "seconds. The following table shows available speeds and the strings that "
7634 #: build/C/man4/mouse.4:69
7636 msgid "bit/s\tstring\n"
7640 #: build/C/man4/mouse.4:70
7646 #: build/C/man4/mouse.4:71
7652 #: build/C/man4/mouse.4:72
7658 #: build/C/man4/mouse.4:73
7664 #: build/C/man4/mouse.4:77
7665 msgid "The first byte of a data packet can be used to synchronization purposes."
7669 #: build/C/man4/mouse.4:77
7671 msgid "Microsoft protocol"
7675 #: build/C/man4/mouse.4:93
7677 "The B<Microsoft> protocol uses 1 start bit, 7 data bits, no parity and one "
7678 "stop bit at the speed of 1200 bits/sec. Data is sent to RxD in 3-byte "
7679 "packets. The I<dx> and I<dy> movements are sent as two's-complement, I<lb> "
7680 "(I<rb>) are set when the left (right) button is pressed:"
7684 #: build/C/man4/mouse.4:96
7686 msgid "byte\td6\td5\td4\td3\td2\td1\td0\n"
7690 #: build/C/man4/mouse.4:97
7692 msgid "1\t1\tlb\trb\tdy7\tdy6\tdx7\tdx6\n"
7696 #: build/C/man4/mouse.4:98
7698 msgid "2\t0\tdx5\tdx4\tdx3\tdx2\tdx1\tdx0\n"
7702 #: build/C/man4/mouse.4:99
7704 msgid "3\t0\tdy5\tdy4\tdy3\tdy2\tdy1\tdy0\n"
7708 #: build/C/man4/mouse.4:101
7710 msgid "3-button Microsoft protocol"
7714 #: build/C/man4/mouse.4:110
7716 "Original Microsoft mice only have two buttons. However, there are some "
7717 "three button mice which also use the Microsoft protocol. Pressing or "
7718 "releasing the middle button is reported by sending a packet with zero "
7719 "movement and no buttons pressed. (Thus, unlike for the other two buttons, "
7720 "the status of the middle button is not reported in each packet.)"
7724 #: build/C/man4/mouse.4:110
7726 msgid "Logitech protocol"
7730 #: build/C/man4/mouse.4:119
7732 "Logitech serial 3-button mice use a different extension of the Microsoft "
7733 "protocol: when the middle button is up, the above 3-byte packet is sent. "
7734 "When the middle button is down a 4-byte packet is sent, where the 4th byte "
7735 "has value 0x20 (or at least has the 0x20 bit set). In particular, a press "
7736 "of the middle button is reported as 0,0,0,0x20 when no other buttons are "
7741 #: build/C/man4/mouse.4:119
7743 msgid "Mousesystems protocol"
7747 #: build/C/man4/mouse.4:137
7749 "The B<Mousesystems> protocol uses 1 start bit, 8 data bits, no parity and "
7750 "two stop bits at the speed of 1200 bits/sec. Data is sent to RxD in 5-byte "
7751 "packets. I<dx> is sent as the sum of the two two's-complement values, I<dy> "
7752 "is send as negated sum of the two two's-complement values. I<lb> (I<mb>, "
7753 "I<rb>) are cleared when the left (middle, right) button is pressed:"
7757 #: build/C/man4/mouse.4:140 build/C/man4/mouse.4:175
7759 msgid "byte\td7\td6\td5\td4\td3\td2\td1\td0\n"
7763 #: build/C/man4/mouse.4:141
7765 msgid "1\t1\t0\t0\t0\t0\tlb\tmb\trb\n"
7769 #: build/C/man4/mouse.4:142
7771 msgid "2\t0\tdxa6\tdxa5\tdxa4\tdxa3\tdxa2\tdxa1\tdxa0\n"
7775 #: build/C/man4/mouse.4:143
7777 msgid "3\t0\tdya6\tdya5\tdya4\tdya3\tdya2\tdya1\tdya0\n"
7781 #: build/C/man4/mouse.4:144
7783 msgid "4\t0\tdxb6\tdxb5\tdxb4\tdxb3\tdxb2\tdxb1\tdxb0\n"
7787 #: build/C/man4/mouse.4:145
7789 msgid "5\t0\tdyb6\tdyb5\tdyb4\tdyb3\tdyb2\tdyb1\tdyb0\n"
7793 #: build/C/man4/mouse.4:150
7795 "Bytes 4 and 5 describe the change that occurred since bytes 2 and 3 were "
7800 #: build/C/man4/mouse.4:150
7802 msgid "Sun protocol"
7806 #: build/C/man4/mouse.4:155
7808 "The B<Sun> protocol is the 3-byte version of the above 5-byte Mousesystems "
7809 "protocol: the last two bytes are not sent."
7813 #: build/C/man4/mouse.4:155
7819 #: build/C/man4/mouse.4:172
7821 "The B<MM> protocol uses 1 start bit, 8 data bits, odd parity and one stop "
7822 "bit at the speed of 1200 bits/sec. Data is sent to RxD in 3-byte packets. "
7823 "I<dx> and I<dy> are sent as single signed values, the sign bit indicating a "
7824 "negative value. I<lb> (I<mb>, I<rb>) are set when the left (middle, right) "
7825 "button is pressed:"
7829 #: build/C/man4/mouse.4:176
7831 msgid "1\t1\t0\t0\tdxs\tdys\tlb\tmb\trb\n"
7835 #: build/C/man4/mouse.4:177
7837 msgid "2\t0\tdx6\tdx5\tdx4\tdx3\tdx2\tdx1\tdx0\n"
7841 #: build/C/man4/mouse.4:178
7843 msgid "3\t0\tdy6\tdy5\tdy4\tdy3\tdy2\tdy1\tdy0\n"
7847 #: build/C/man4/mouse.4:181
7849 msgid "I</dev/mouse>"
7853 #: build/C/man4/mouse.4:184
7854 msgid "A commonly used symlink pointing to a mouse device."
7858 #: build/C/man4/mouse.4:187
7859 msgid "B<ttyS>(4), B<gpm>(8)"
7863 #: build/C/man4/msr.4:26
7869 #: build/C/man4/msr.4:29
7870 msgid "msr - x86 CPU MSR access device"
7874 #: build/C/man4/msr.4:36
7876 "I</dev/cpu/CPUNUM/msr> provides an interface to read and write the "
7877 "model-specific registers (MSRs) of an x86 CPU. I<CPUNUM> is the number of "
7878 "the CPU to access as listed in I</proc/cpuinfo>."
7882 #: build/C/man4/msr.4:42
7884 "The register access is done by opening the file and seeking to the MSR "
7885 "number as offset in the file, and then reading or writing in chunks of 8 "
7886 "bytes. An I/O transfer of more than 8 bytes means multiple reads or writes "
7887 "of the same register."
7891 #: build/C/man4/msr.4:47
7893 "This file is protected so that it can be read and written only by the user "
7894 "I<root>, or members of the group I<root>."
7898 #: build/C/man4/msr.4:53
7900 "The I<msr> driver is not auto-loaded. On modular kernels you might need to "
7901 "use the following command to load it explicitly before use:"
7905 #: build/C/man4/msr.4:55
7907 msgid " $ I<modprobe msr>\n"
7911 #: build/C/man4/msr.4:59
7913 "Intel Corporation Intel 64 and IA-32 Architectures Software Developer's "
7914 "Manual Volume 3B Appendix B, for an overview of the Intel CPU MSRs."
7918 #: build/C/man4/null.4:26
7924 #: build/C/man4/null.4:26
7930 #: build/C/man4/null.4:29
7931 msgid "null, zero - data sink"
7935 #: build/C/man4/null.4:35
7936 msgid "Data written to a B<null> or B<zero> special file is discarded."
7940 #: build/C/man4/null.4:44
7942 "Reads from the B<null> special file always return end of file (i.e., "
7943 "B<read>(2) returns 0), whereas reads from B<zero> always return bytes "
7944 "containing zero (\\e0 characters)."
7948 #: build/C/man4/null.4:49
7949 msgid "B<null> and B<zero> are typically created by:"
7953 #: build/C/man4/null.4:52
7954 msgid "mknod -m 666 /dev/null c 1 3"
7958 #: build/C/man4/null.4:54
7959 msgid "mknod -m 666 /dev/zero c 1 5"
7963 #: build/C/man4/null.4:56
7964 msgid "chown root:root /dev/null /dev/zero"
7968 #: build/C/man4/null.4:59
7969 msgid "I</dev/null>"
7973 #: build/C/man4/null.4:61
7974 msgid "I</dev/zero>"
7978 #: build/C/man4/null.4:64
7980 "If these devices are not writable and readable for all users, many programs "
7981 "will act strangely."
7985 #: build/C/man4/null.4:68
7986 msgid "B<chown>(1), B<mknod>(1), B<full>(4)"
7990 #: build/C/man7/pipe.7:25
7996 #: build/C/man7/pipe.7:25
8002 #: build/C/man7/pipe.7:28
8003 msgid "pipe - overview of pipes and FIFOs"
8007 #: build/C/man7/pipe.7:37
8009 "Pipes and FIFOs (also known as named pipes) provide a unidirectional "
8010 "interprocess communication channel. A pipe has a I<read end> and a I<write "
8011 "end>. Data written to the write end of a pipe can be read from the read end "
8016 #: build/C/man7/pipe.7:47
8018 "A pipe is created using B<pipe>(2), which creates a new pipe and returns two "
8019 "file descriptors, one referring to the read end of the pipe, the other "
8020 "referring to the write end. Pipes can be used to create a communication "
8021 "channel between related processes; see B<pipe>(2) for an example."
8025 #: build/C/man7/pipe.7:66
8027 "A FIFO (short for First In First Out) has a name within the filesystem "
8028 "(created using B<mkfifo>(3)), and is opened using B<open>(2). Any process "
8029 "may open a FIFO, assuming the file permissions allow it. The read end is "
8030 "opened using the B<O_RDONLY> flag; the write end is opened using the "
8031 "B<O_WRONLY> flag. See B<fifo>(7) for further details. I<Note>: although "
8032 "FIFOs have a pathname in the filesystem, I/O on FIFOs does not involve "
8033 "operations on the underlying device (if there is one)."
8037 #: build/C/man7/pipe.7:66
8039 msgid "I/O on pipes and FIFOs"
8043 #: build/C/man7/pipe.7:71
8045 "The only difference between pipes and FIFOs is the manner in which they are "
8046 "created and opened. Once these tasks have been accomplished, I/O on pipes "
8047 "and FIFOs has exactly the same semantics."
8051 #: build/C/man7/pipe.7:85
8053 "If a process attempts to read from an empty pipe, then B<read>(2) will "
8054 "block until data is available. If a process attempts to write to a full "
8055 "pipe (see below), then B<write>(2) blocks until sufficient data has been "
8056 "read from the pipe to allow the write to complete. Nonblocking I/O is "
8057 "possible by using the B<fcntl>(2) B<F_SETFL> operation to enable the "
8058 "B<O_NONBLOCK> open file status flag."
8062 #: build/C/man7/pipe.7:89
8064 "The communication channel provided by a pipe is a I<byte stream>: there is "
8065 "no concept of message boundaries."
8069 #: build/C/man7/pipe.7:116
8071 "If all file descriptors referring to the write end of a pipe have been "
8072 "closed, then an attempt to B<read>(2) from the pipe will see end-of-file "
8073 "(B<read>(2) will return 0). If all file descriptors referring to the read "
8074 "end of a pipe have been closed, then a B<write>(2) will cause a B<SIGPIPE> "
8075 "signal to be generated for the calling process. If the calling process is "
8076 "ignoring this signal, then B<write>(2) fails with the error B<EPIPE>. An "
8077 "application that uses B<pipe>(2) and B<fork>(2) should use suitable "
8078 "B<close>(2) calls to close unnecessary duplicate file descriptors; this "
8079 "ensures that end-of-file and B<SIGPIPE>/B<EPIPE> are delivered when "
8084 #: build/C/man7/pipe.7:120
8085 msgid "It is not possible to apply B<lseek>(2) to a pipe."
8089 #: build/C/man7/pipe.7:120
8091 msgid "Pipe capacity"
8095 #: build/C/man7/pipe.7:132
8097 "A pipe has a limited capacity. If the pipe is full, then a B<write>(2) "
8098 "will block or fail, depending on whether the B<O_NONBLOCK> flag is set (see "
8099 "below). Different implementations have different limits for the pipe "
8100 "capacity. Applications should not rely on a particular capacity: an "
8101 "application should be designed so that a reading process consumes data as "
8102 "soon as it is available, so that a writing process does not remain blocked."
8106 #: build/C/man7/pipe.7:136
8108 "In Linux versions before 2.6.11, the capacity of a pipe was the same as the "
8109 "system page size (e.g., 4096 bytes on i386). Since Linux 2.6.11, the pipe "
8110 "capacity is 65536 bytes."
8114 #: build/C/man7/pipe.7:136
8120 #: build/C/man7/pipe.7:158
8122 "POSIX.1-2001 says that B<write>(2)s of less than B<PIPE_BUF> bytes must be "
8123 "atomic: the output data is written to the pipe as a contiguous sequence. "
8124 "Writes of more than B<PIPE_BUF> bytes may be nonatomic: the kernel may "
8125 "interleave the data with data written by other processes. POSIX.1-2001 "
8126 "requires B<PIPE_BUF> to be at least 512 bytes. (On Linux, B<PIPE_BUF> is "
8127 "4096 bytes.) The precise semantics depend on whether the file descriptor is "
8128 "nonblocking (B<O_NONBLOCK>), whether there are multiple writers to the pipe, "
8129 "and on I<n>, the number of bytes to be written:"
8133 #: build/C/man7/pipe.7:158
8135 msgid "B<O_NONBLOCK> disabled, I<n> E<lt>= B<PIPE_BUF>"
8139 #: build/C/man7/pipe.7:167
8141 "All I<n> bytes are written atomically; B<write>(2) may block if there is "
8142 "not room for I<n> bytes to be written immediately"
8146 #: build/C/man7/pipe.7:167
8148 msgid "B<O_NONBLOCK> enabled, I<n> E<lt>= B<PIPE_BUF>"
8152 #: build/C/man7/pipe.7:181
8154 "If there is room to write I<n> bytes to the pipe, then B<write>(2) succeeds "
8155 "immediately, writing all I<n> bytes; otherwise B<write>(2) fails, with "
8156 "I<errno> set to B<EAGAIN>."
8160 #: build/C/man7/pipe.7:181
8162 msgid "B<O_NONBLOCK> disabled, I<n> E<gt> B<PIPE_BUF>"
8166 #: build/C/man7/pipe.7:193
8168 "The write is nonatomic: the data given to B<write>(2) may be interleaved "
8169 "with B<write>(2)s by other process; the B<write>(2) blocks until I<n> bytes "
8170 "have been written."
8174 #: build/C/man7/pipe.7:193
8176 msgid "B<O_NONBLOCK> enabled, I<n> E<gt> B<PIPE_BUF>"
8180 #: build/C/man7/pipe.7:208
8182 "If the pipe is full, then B<write>(2) fails, with I<errno> set to "
8183 "B<EAGAIN>. Otherwise, from 1 to I<n> bytes may be written (i.e., a "
8184 "\"partial write\" may occur; the caller should check the return value from "
8185 "B<write>(2) to see how many bytes were actually written), and these bytes "
8186 "may be interleaved with writes by other processes."
8190 #: build/C/man7/pipe.7:208
8192 msgid "Open file status flags"
8196 #: build/C/man7/pipe.7:214
8198 "The only open file status flags that can be meaningfully applied to a pipe "
8199 "or FIFO are B<O_NONBLOCK> and B<O_ASYNC>."
8203 #: build/C/man7/pipe.7:226
8205 "Setting the B<O_ASYNC> flag for the read end of a pipe causes a signal "
8206 "(B<SIGIO> by default) to be generated when new input becomes available on "
8207 "the pipe (see B<fcntl>(2) for details). On Linux, B<O_ASYNC> is supported "
8208 "for pipes and FIFOs only since kernel 2.6."
8212 #: build/C/man7/pipe.7:226
8214 msgid "Portability notes"
8218 #: build/C/man7/pipe.7:232
8220 "On some systems (but not Linux), pipes are bidirectional: data can be "
8221 "transmitted in both directions between the pipe ends. According to "
8222 "POSIX.1-2001, pipes only need to be unidirectional. Portable applications "
8223 "should avoid reliance on bidirectional pipe semantics."
8227 #: build/C/man7/pipe.7:244
8229 "B<dup>(2), B<fcntl>(2), B<open>(2), B<pipe>(2), B<poll>(2), B<select>(2), "
8230 "B<socketpair>(2), B<stat>(2), B<mkfifo>(3), B<epoll>(7), B<fifo>(7)"
8234 #: build/C/man4/ram.4:26
8240 #: build/C/man4/ram.4:29
8241 msgid "ram - ram disk device"
8245 #: build/C/man4/ram.4:33
8246 msgid "The I<ram> device is a block device to access the ram disk in raw mode."
8250 #: build/C/man4/ram.4:38
8251 msgid "mknod -m 660 /dev/ram b 1 1"
8255 #: build/C/man4/ram.4:40
8256 msgid "chown root:disk /dev/ram"
8260 #: build/C/man4/ram.4:43
8265 #: build/C/man4/ram.4:47
8266 msgid "B<chown>(1), B<mknod>(1), B<mount>(8)"
8270 #: build/C/man4/random.4:19
8276 #: build/C/man4/random.4:19
8282 #: build/C/man4/random.4:22
8283 msgid "random, urandom - kernel random number source devices"
8287 #: build/C/man4/random.4:24
8288 msgid "#include E<lt>linux/random.hE<gt>"
8292 #: build/C/man4/random.4:26
8293 msgid "B<int ioctl(>I<fd>B<, RND>I<request>B<, >I<param>B<);>"
8297 #: build/C/man4/random.4:33
8299 "The character special files I</dev/random> and I</dev/urandom> (present "
8300 "since Linux 1.3.30) provide an interface to the kernel's random number "
8301 "generator. File I</dev/random> has major device number 1 and minor device "
8302 "number 8. File I</dev/urandom> has major device number 1 and minor device "
8307 #: build/C/man4/random.4:39
8309 "The random number generator gathers environmental noise from device drivers "
8310 "and other sources into an entropy pool. The generator also keeps an "
8311 "estimate of the number of bits of noise in the entropy pool. From this "
8312 "entropy pool random numbers are created."
8316 #: build/C/man4/random.4:47
8318 "When read, the I</dev/random> device will only return random bytes within "
8319 "the estimated number of bits of noise in the entropy pool. I</dev/random> "
8320 "should be suitable for uses that need very high quality randomness such as "
8321 "one-time pad or key generation. When the entropy pool is empty, reads from "
8322 "I</dev/random> will block until additional environmental noise is gathered."
8326 #: build/C/man4/random.4:58
8328 "A read from the I</dev/urandom> device will not block waiting for more "
8329 "entropy. As a result, if there is not sufficient entropy in the entropy "
8330 "pool, the returned values are theoretically vulnerable to a cryptographic "
8331 "attack on the algorithms used by the driver. Knowledge of how to do this is "
8332 "not available in the current unclassified literature, but it is "
8333 "theoretically possible that such an attack may exist. If this is a concern "
8334 "in your application, use I</dev/random> instead."
8338 #: build/C/man4/random.4:65
8340 "Writing to I</dev/random> or I</dev/urandom> will update the entropy pool "
8341 "with the data written, but this will not result in a higher entropy count. "
8342 "This means that it will impact the contents read from both files, but it "
8343 "will not make reads from I</dev/random> faster."
8347 #: build/C/man4/random.4:74
8349 "If you are unsure about whether you should use I</dev/random> or "
8350 "I</dev/urandom>, then probably you want to use the latter. As a general "
8351 "rule, I</dev/urandom> should be used for everything except long-lived "
8356 #: build/C/man4/random.4:86
8358 "If a seed file is saved across reboots as recommended below (all major Linux "
8359 "distributions have done this since 2000 at least), the output is "
8360 "cryptographically secure against attackers without local root access as soon "
8361 "as it is reloaded in the boot sequence, and perfectly adequate for network "
8362 "encryption session keys. Since reads from I</dev/random> may block, users "
8363 "will usually want to open it in nonblocking mode (or perform a read with "
8364 "timeout), and provide some sort of user notification if the desired entropy "
8365 "is not immediately available."
8369 #: build/C/man4/random.4:99
8371 "The kernel random-number generator is designed to produce a small amount of "
8372 "high-quality seed material to seed a cryptographic pseudo-random number "
8373 "generator (CPRNG). It is designed for security, not speed, and is poorly "
8374 "suited to generating large amounts of random data. Users should be very "
8375 "economical in the amount of seed material that they read from "
8376 "I</dev/urandom> (and I</dev/random>); unnecessarily reading large quantities "
8377 "of data from this device will have a negative impact on other users of the "
8382 #: build/C/man4/random.4:107
8384 "The amount of seed material required to generate a cryptographic key equals "
8385 "the effective key size of the key. For example, a 3072-bit RSA or "
8386 "Diffie-Hellman private key has an effective key size of 128 bits (it "
8387 "requires about 2^128 operations to break) so a key generator only needs 128 "
8388 "bits (16 bytes) of seed material from I</dev/random>."
8392 #: build/C/man4/random.4:116
8394 "While some safety margin above that minimum is reasonable, as a guard "
8395 "against flaws in the CPRNG algorithm, no cryptographic primitive available "
8396 "today can hope to promise more than 256 bits of security, so if any program "
8397 "reads more than 256 bits (32 bytes) from the kernel random pool per "
8398 "invocation, or per reasonable reseed interval (not less than one minute), "
8399 "that should be taken as a sign that its cryptography is I<not> skillfully "
8404 #: build/C/man4/random.4:116
8406 msgid "Configuration"
8410 #: build/C/man4/random.4:120
8412 "If your system does not have I</dev/random> and I</dev/urandom> created "
8413 "already, they can be created with the following commands:"
8417 #: build/C/man4/random.4:125
8420 " mknod -m 644 /dev/random c 1 8\n"
8421 " mknod -m 644 /dev/urandom c 1 9\n"
8422 " chown root:root /dev/random /dev/urandom\n"
8426 #: build/C/man4/random.4:135
8428 "When a Linux system starts up without much operator interaction, the entropy "
8429 "pool may be in a fairly predictable state. This reduces the actual amount "
8430 "of noise in the entropy pool below the estimate. In order to counteract "
8431 "this effect, it helps to carry entropy pool information across shut-downs "
8432 "and start-ups. To do this, add the following lines to an appropriate script "
8433 "which is run during the Linux system start-up sequence:"
8437 #: build/C/man4/random.4:150
8440 " echo \"Initializing random number generator...\"\n"
8441 " random_seed=/var/run/random-seed\n"
8442 " # Carry a random seed from start-up to start-up\n"
8443 " # Load and then save the whole entropy pool\n"
8444 " if [ -f $random_seed ]; then\n"
8445 " cat $random_seed E<gt>/dev/urandom\n"
8447 " touch $random_seed\n"
8449 " chmod 600 $random_seed\n"
8450 " poolfile=/proc/sys/kernel/random/poolsize\n"
8451 " [ -r $poolfile ] && bytes=\\`cat $poolfile\\` || bytes=512\n"
8452 " dd if=/dev/urandom of=$random_seed count=1 bs=$bytes\n"
8456 #: build/C/man4/random.4:154
8458 "Also, add the following lines in an appropriate script which is run during "
8459 "the Linux system shutdown:"
8463 #: build/C/man4/random.4:165
8466 " # Carry a random seed from shut-down to start-up\n"
8467 " # Save the whole entropy pool\n"
8468 " echo \"Saving random seed...\"\n"
8469 " random_seed=/var/run/random-seed\n"
8470 " touch $random_seed\n"
8471 " chmod 600 $random_seed\n"
8472 " poolfile=/proc/sys/kernel/random/poolsize\n"
8473 " [ -r $poolfile ] && bytes=\\`cat $poolfile\\` || bytes=512\n"
8474 " dd if=/dev/urandom of=$random_seed count=1 bs=$bytes\n"
8478 #: build/C/man4/random.4:166
8480 msgid "/proc Interface"
8484 #: build/C/man4/random.4:172
8486 "The files in the directory I</proc/sys/kernel/random> (present since 2.3.16) "
8487 "provide an additional interface to the I</dev/random> device."
8491 #: build/C/man4/random.4:178
8493 "The read-only file I<entropy_avail> gives the available entropy. Normally, "
8494 "this will be 4096 (bits), a full entropy pool."
8498 #: build/C/man4/random.4:183
8500 "The file I<poolsize> gives the size of the entropy pool. The semantics of "
8501 "this file vary across kernel versions:"
8505 #: build/C/man4/random.4:184
8511 #: build/C/man4/random.4:191
8513 "This file gives the size of the entropy pool in I<bytes>. Normally, this "
8514 "file will have the value 512, but it is writable, and can be changed to any "
8515 "value for which an algorithm is available. The choices are 32, 64, 128, "
8516 "256, 512, 1024, or 2048."
8520 #: build/C/man4/random.4:191
8526 #: build/C/man4/random.4:196
8528 "This file is read-only, and gives the size of the entropy pool in I<bits>. "
8529 "It contains the value 4096."
8533 #: build/C/man4/random.4:214
8535 "The file I<read_wakeup_threshold> contains the number of bits of entropy "
8536 "required for waking up processes that sleep waiting for entropy from "
8537 "I</dev/random>. The default is 64. The file I<write_wakeup_threshold> "
8538 "contains the number of bits of entropy below which we wake up processes that "
8539 "do a B<select>(2) or B<poll>(2) for write access to I</dev/random>. These "
8540 "values can be changed by writing to the files."
8544 #: build/C/man4/random.4:222
8546 "The read-only files I<uuid> and I<boot_id> contain random strings like "
8547 "6fd5a44b-35f4-4ad4-a9b9-6b9be13e1fe9. The former is generated afresh for "
8548 "each read, the latter was generated once."
8552 #: build/C/man4/random.4:222
8554 msgid "ioctl(2) interface"
8558 #: build/C/man4/random.4:233
8560 "The following B<ioctl>(2) requests are defined on file descriptors "
8561 "connected to either I</dev/random> or I</dev/urandom>. All requests "
8562 "performed will interact with the input entropy pool impacting both "
8563 "I</dev/random> and I</dev/urandom>. The B<CAP_SYS_ADMIN> capability is "
8564 "required for all requests except B<RNDGETENTCNT>."
8568 #: build/C/man4/random.4:233
8570 msgid "B<RNDGETENTCNT>"
8574 #: build/C/man4/random.4:240
8576 "Retrieve the entropy count of the input pool, the contents will be the same "
8577 "as the I<entropy_avail> file under proc. The result will be stored in the "
8578 "int pointed to by the argument."
8582 #: build/C/man4/random.4:240
8584 msgid "B<RNDADDTOENTCNT>"
8588 #: build/C/man4/random.4:244
8590 "Increment or decrement the entropy count of the input pool by the value "
8591 "pointed to by the argument."
8595 #: build/C/man4/random.4:244
8597 msgid "B<RNDGETPOOL>"
8601 #: build/C/man4/random.4:247
8602 msgid "Removed in Linux 2.6.9."
8606 #: build/C/man4/random.4:247
8608 msgid "B<RNDADDENTROPY>"
8612 #: build/C/man4/random.4:255
8614 "Add some additional entropy to the input pool, incrementing the entropy "
8615 "count. This differs from writing to I</dev/random> or I</dev/urandom>, "
8616 "which only adds some data but does not increment the entropy count. The "
8617 "following structure is used:"
8621 #: build/C/man4/random.4:262
8624 " struct rand_pool_info {\n"
8625 " int entropy_count;\n"
8632 #: build/C/man4/random.4:271
8634 "Here I<entropy_count> is the value added to (or subtracted from) the entropy "
8635 "count, and I<buf> is the buffer of size I<buf_size> which gets added to the "
8640 #: build/C/man4/random.4:271
8642 msgid "B<RNDZAPENTCNT>, B<RNDCLEARPOOL>"
8646 #: build/C/man4/random.4:275
8648 "Zero the entropy count of all pools and add some system data (such as wall "
8649 "clock) to the pools."
8653 #: build/C/man4/random.4:277
8658 #. The kernel's random number generator was written by
8659 #. Theodore Ts'o (tytso@athena.mit.edu).
8661 #: build/C/man4/random.4:282
8662 msgid "/dev/urandom"
8666 #: build/C/man4/random.4:284
8671 #: build/C/man4/random.4:286
8672 msgid "RFC\\ 1750, \"Randomness Recommendations for Security\""
8676 #: build/C/man4/sd.4:26
8682 #: build/C/man4/sd.4:26
8688 #: build/C/man4/sd.4:29
8689 msgid "sd - driver for SCSI disk drives"
8693 #: build/C/man4/sd.4:33
8696 "B<#include E<lt>linux/hdreg.hE<gt> >/* for HDIO_GETGEO */\n"
8697 "B<#include E<lt>linux/fs.hE<gt> >/* for BLKGETSIZE and BLKRRPART "
8702 #: build/C/man4/sd.4:45
8704 "The block device name has the following form: B<sd>I<lp,> where I<l> is a "
8705 "letter denoting the physical drive, and I<p> is a number denoting the "
8706 "partition on that physical drive. Often, the partition number, I<p>, will "
8707 "be left off when the device corresponds to the whole drive."
8711 #: build/C/man4/sd.4:54
8713 "SCSI disks have a major device number of 8, and a minor device number of the "
8714 "form (16 * I<drive_number>) + I<partition_number>, where I<drive_number> is "
8715 "the number of the physical drive in order of detection, and "
8716 "I<partition_number> is as follows:"
8720 #: build/C/man4/sd.4:56
8721 msgid "partition 0 is the whole drive"
8725 #: build/C/man4/sd.4:58
8726 msgid "partitions 1-4 are the DOS \"primary\" partitions"
8730 #: build/C/man4/sd.4:60
8731 msgid "partitions 5-8 are the DOS \"extended\" (or \"logical\") partitions"
8735 #: build/C/man4/sd.4:68
8737 "For example, I</dev/sda> will have major 8, minor 0, and will refer to all "
8738 "of the first SCSI drive in the system; and I</dev/sdb3> will have major 8, "
8739 "minor 19, and will refer to the third DOS \"primary\" partition on the "
8740 "second SCSI drive in the system."
8744 #: build/C/man4/sd.4:71
8746 "At this time, only block devices are provided. Raw devices have not yet "
8751 #: build/C/man4/sd.4:75
8752 msgid "The following I<ioctl>s are provided:"
8756 #: build/C/man4/sd.4:75
8758 msgid "B<HDIO_GETGEO>"
8762 #: build/C/man4/sd.4:79
8763 msgid "Returns the BIOS disk parameters in the following structure:"
8767 #: build/C/man4/sd.4:88
8770 "struct hd_geometry {\n"
8771 " unsigned char heads;\n"
8772 " unsigned char sectors;\n"
8773 " unsigned short cylinders;\n"
8774 " unsigned long start;\n"
8779 #: build/C/man4/sd.4:94
8780 msgid "A pointer to this structure is passed as the B<ioctl>(2) parameter."
8784 #: build/C/man4/sd.4:109
8786 "The information returned in the parameter is the disk geometry of the drive "
8787 "I<as understood by DOS!> This geometry is I<not> the physical geometry of "
8788 "the drive. It is used when constructing the drive's partition table, "
8789 "however, and is needed for convenient operation of B<fdisk>(1), "
8790 "B<efdisk>(1), and B<lilo>(1). If the geometry information is not available, "
8791 "zero will be returned for all of the parameters."
8795 #: build/C/man4/sd.4:110
8797 msgid "B<BLKGETSIZE>"
8801 #: build/C/man4/sd.4:117
8803 "Returns the device size in sectors. The B<ioctl>(2) parameter should be a "
8804 "pointer to a I<long>."
8808 #: build/C/man4/sd.4:117
8810 msgid "B<BLKRRPART>"
8814 #: build/C/man4/sd.4:121
8815 msgid "Forces a reread of the SCSI disk partition tables. No parameter is needed."
8819 #: build/C/man4/sd.4:131
8821 "The SCSI B<ioctl>(2) operations are also supported. If the B<ioctl>(2) "
8822 "parameter is required, and it is NULL, then B<ioctl>(2) will fail with the "
8827 #: build/C/man4/sd.4:133
8828 msgid "/dev/sd[a-h]: the whole device"
8834 #: build/C/man4/sd.4:137
8835 msgid "/dev/sd[a-h][0-8]: individual block partitions"
8839 #: build/C/man3/setlogmask.3:25
8845 #: build/C/man3/setlogmask.3:25
8851 #: build/C/man3/setlogmask.3:28
8852 msgid "setlogmask - set log priority mask"
8856 #: build/C/man3/setlogmask.3:31
8858 msgid "B<#include E<lt>syslog.hE<gt>>\n"
8862 #: build/C/man3/setlogmask.3:33
8864 msgid "B<int setlogmask(int >I<mask>B<);>\n"
8868 #: build/C/man3/setlogmask.3:43
8870 "A process has a log priority mask that determines which calls to "
8871 "B<syslog>(3) may be logged. All other calls will be ignored. Logging is "
8872 "enabled for the priorities that have the corresponding bit set in I<mask>. "
8873 "The initial mask is such that logging is enabled for all priorities."
8877 #: build/C/man3/setlogmask.3:49
8879 "The B<setlogmask>() function sets this logmask for the calling process, and "
8880 "returns the previous mask. If the mask argument is 0, the current logmask "
8885 #: build/C/man3/setlogmask.3:69
8887 "The eight priorities are B<LOG_EMERG>, B<LOG_ALERT>, B<LOG_CRIT>, "
8888 "B<LOG_ERR>, B<LOG_WARNING>, B<LOG_NOTICE>, B<LOG_INFO>, and B<LOG_DEBUG>. "
8889 "The bit corresponding to a priority I<p> is I<LOG_MASK(p)>. Some systems "
8890 "also provide a macro I<LOG_UPTO(p)> for the mask of all priorities in the "
8891 "above list up to and including I<p>."
8895 #: build/C/man3/setlogmask.3:71
8896 msgid "This function returns the previous log priority mask."
8900 #. The glibc logmask handling was broken in versions before glibc 2.1.1.
8902 #: build/C/man3/setlogmask.3:75
8907 #: build/C/man3/setlogmask.3:78
8908 msgid "POSIX.1-2001. Note that the description in POSIX.1-2001 is flawed."
8912 #: build/C/man3/setlogmask.3:82
8913 msgid "B<closelog>(3), B<openlog>(3), B<syslog>(3)"
8917 #: build/C/man4/sk98lin.4:27
8923 #: build/C/man4/sk98lin.4:30
8924 msgid "sk98lin - Marvell/SysKonnect Gigabit Ethernet driver v6.21"
8928 #: build/C/man4/sk98lin.4:62
8930 "B<insmod sk98lin.o> [B<Speed_A=>I<i,j,...>] [B<Speed_B=>I<i,j,...>] "
8931 "[B<AutoNeg_A=>I<i,j,...>] [B<AutoNeg_B=>I<i,j,...>] [B<DupCap_A=>I<i,j,...>] "
8932 "[B<DupCap_B=>I<i,j,...>] [B<FlowCtrl_A=>I<i,j,...>] "
8933 "[B<FlowCtrl_B=>I<i,j,...>] [B<Role_A=>I<i,j,...>] [B<Role_B=>I<i,j,...>] "
8934 "[B<ConType=>I<i,j,...>] [B<Moderation=>I<i,j,...>] "
8935 "[B<IntsPerSec=>I<i,j,...>] [B<PrefPort=>I<i,j,...>] [B<RlmtMode=>I<i,j,...>]"
8939 #: build/C/man4/sk98lin.4:67
8940 msgid "B<Note>: This obsolete driver was removed from the kernel in version 2.6.26."
8944 #: build/C/man4/sk98lin.4:74
8946 "B<sk98lin> is the Gigabit Ethernet driver for Marvell and SysKonnect network "
8947 "adapter cards. It supports SysKonnect SK-98xx/SK-95xx compliant Gigabit "
8948 "Ethernet Adapter and any Yukon compliant chipset."
8952 #: build/C/man4/sk98lin.4:81
8954 "When loading the driver using insmod, parameters for the network adapter "
8955 "cards might be stated as a sequence of comma separated commands. If for "
8956 "instance two network adapters are installed and AutoNegotiation on Port A of "
8957 "the first adapter should be ON, but on the Port A of the second adapter "
8958 "switched OFF, one must enter:"
8962 #: build/C/man4/sk98lin.4:83
8964 msgid " insmod sk98lin.o AutoNeg_A=On,Off\n"
8968 #: build/C/man4/sk98lin.4:98
8970 "After B<sk98lin> is bound to one or more adapter cards and the I</proc> "
8971 "filesystem is mounted on your system, a dedicated statistics file will be "
8972 "created in the folder I</proc/net/sk98lin> for all ports of the installed "
8973 "network adapter cards. Those files are named I<eth[x]>, where I<x> is the "
8974 "number of the interface that has been assigned to a dedicated port by the "
8979 #: build/C/man4/sk98lin.4:108
8981 "If loading is finished, any desired IP address can be assigned to the "
8982 "respective I<eth[x]> interface using the B<ifconfig>(8) command. This "
8983 "causes the adapter to connect to the Ethernet and to display a status "
8984 "message on the console saying \"ethx: network connection up using port y\" "
8985 "followed by the configured or detected connection parameters."
8989 #: build/C/man4/sk98lin.4:124
8991 "The B<sk98lin> also supports large frames (also called jumbo frames). Using "
8992 "jumbo frames can improve throughput tremendously when transferring large "
8993 "amounts of data. To enable large frames, the MTU (maximum transfer unit) "
8994 "size for an interface is to be set to a high value. The default MTU size is "
8995 "1500 and can be changed up to 9000 (bytes). Setting the MTU size can be "
8996 "done when assigning the IP address to the interface or later by using the "
8997 "B<ifconfig>(8) command with the mtu parameter. If for instance eth0 needs "
8998 "an IP address and a large frame MTU size, the following two commands might "
9003 #: build/C/man4/sk98lin.4:127
9006 " ifconfig eth0 10.1.1.1\n"
9007 " ifconfig eth0 mtu 9000\n"
9011 #: build/C/man4/sk98lin.4:129
9012 msgid "Those two commands might even be combined into one:"
9016 #: build/C/man4/sk98lin.4:131
9018 msgid " ifconfig eth0 10.1.1.1 mtu 9000\n"
9022 #: build/C/man4/sk98lin.4:144
9024 "Note that large frames can be used only if permitted by your network "
9025 "infrastructure. This means, that any switch being used in your Ethernet "
9026 "must also support large frames. Quite some switches support large frames, "
9027 "but need to be configured to do so. Most of the times, their default "
9028 "setting is to support only standard frames with an MTU size of 1500 "
9029 "(bytes). In addition to the switches inside the network, all network "
9030 "adapters that are to be used must also be enabled regarding jumbo frames. "
9031 "If an adapter is not set to receive large frames, it will simply drop them."
9035 #: build/C/man4/sk98lin.4:148
9037 "Switching back to the standard Ethernet frame size can be done by using the "
9038 "B<ifconfig>(8) command again:"
9042 #: build/C/man4/sk98lin.4:150
9044 msgid " ifconfig eth0 mtu 1500\n"
9048 #: build/C/man4/sk98lin.4:156
9050 "The Marvell/SysKonnect Gigabit Ethernet driver for Linux is able to support "
9051 "VLAN and Link Aggregation according to IEEE standards 802.1, 802.1q, and "
9052 "802.3ad. Those features are available only after installation of open "
9053 "source modules which can be found on the Internet:"
9057 #: build/C/man4/sk98lin.4:161
9058 msgid "I<VLAN>: E<.UR http://www.candelatech.com\\:/~greear\\:/vlan.html> E<.UE>"
9062 #: build/C/man4/sk98lin.4:167
9063 msgid "I<Link> I<Aggregation>: E<.UR http://www.st.rim.or.jp\\:/~yumo> E<.UE>"
9067 #: build/C/man4/sk98lin.4:172
9069 "Note that Marvell/SysKonnect does not offer any support for these open "
9070 "source modules and does not take the responsibility for any kind of failures "
9071 "or problems arising when using these modules."
9075 #: build/C/man4/sk98lin.4:172 build/C/man4/wavelan.4:39
9081 #: build/C/man4/sk98lin.4:173
9083 msgid "B<Speed_A=>I<i,j,...>"
9087 #: build/C/man4/sk98lin.4:190
9089 "This parameter is used to set the speed capabilities of port A of an adapter "
9090 "card. It is valid only for Yukon copper adapters. Possible values are: "
9091 "I<10>, I<100>, I<1000>, or I<Auto>; I<Auto> is the default. Usually, the "
9092 "speed is negotiated between the two ports during link establishment. If "
9093 "this fails, a port can be forced to a specific setting with this parameter."
9097 #: build/C/man4/sk98lin.4:190
9099 msgid "B<Speed_B=>I<i,j,...>"
9103 #: build/C/man4/sk98lin.4:207
9105 "This parameter is used to set the speed capabilities of port B of an adapter "
9106 "card. It is valid only for Yukon copper adapters. Possible values are: "
9107 "I<10>, I<100>, I<1000>, or I<Auto>; I<Auto> is the default. Usually, the "
9108 "speed is negotiated between the two ports during link establishment. If "
9109 "this fails, a port can be forced to a specific setting with this parameter."
9113 #: build/C/man4/sk98lin.4:207
9115 msgid "B<AutoNeg_A=>I<i,j,...>"
9119 #: build/C/man4/sk98lin.4:221
9121 "Enables or disables the use of autonegotiation of port A of an adapter "
9122 "card. Possible values are: I<On>, I<Off>, or I<Sense>; I<On> is the "
9123 "default. The I<Sense> mode automatically detects whether the link partner "
9124 "supports auto-negotiation or not."
9128 #: build/C/man4/sk98lin.4:221
9130 msgid "B<AutoNeg_B=>I<i,j,...>"
9134 #: build/C/man4/sk98lin.4:235
9136 "Enables or disables the use of autonegotiation of port B of an adapter "
9137 "card. Possible values are: I<On>, I<Off>, or I<Sense>; I<On> is the "
9138 "default. The I<Sense> mode automatically detects whether the link partner "
9139 "supports auto-negotiation or not."
9143 #: build/C/man4/sk98lin.4:235
9145 msgid "B<DupCap_A=>I<i,j,...>"
9149 #: build/C/man4/sk98lin.4:265
9151 "This parameter indicates the duplex mode to be used for port A of an adapter "
9152 "card. Possible values are: I<Half>, I<Full>, or I<Both>; I<Both> is the "
9153 "default. This parameter is relevant only if AutoNeg_A of port A is not set "
9154 "to I<Sense>. If AutoNeg_A is set to I<On>, all three values of DupCap_A ( "
9155 "I<Half>, I<Full> or I<Both>) might be stated. If AutoNeg_A is set to "
9156 "I<Off>, only DupCap_A values I<Full> and I<Half> are allowed. This DupCap_A "
9157 "parameter is useful if your link partner does not support all possible "
9158 "duplex combinations."
9162 #: build/C/man4/sk98lin.4:265
9164 msgid "B<DupCap_B=>I<i,j,...>"
9168 #: build/C/man4/sk98lin.4:295
9170 "This parameter indicates the duplex mode to be used for port B of an adapter "
9171 "card. Possible values are: I<Half>, I<Full>, or I<Both>; I<Both> is the "
9172 "default. This parameter is relevant only if AutoNeg_B of port B is not set "
9173 "to I<Sense>. If AutoNeg_B is set to I<On>, all three values of DupCap_B ( "
9174 "I<Half>, I<Full> or I<Both>) might be stated. If AutoNeg_B is set to "
9175 "I<Off>, only DupCap_B values I<Full> and I<Half> are allowed. This DupCap_B "
9176 "parameter is useful if your link partner does not support all possible "
9177 "duplex combinations."
9181 #: build/C/man4/sk98lin.4:295
9183 msgid "B<FlowCtrl_A=>I<i,j,...>"
9187 #: build/C/man4/sk98lin.4:308 build/C/man4/sk98lin.4:341
9189 "This parameter can be used to set the flow control capabilities the port "
9190 "reports during auto-negotiation. Possible values are: I<Sym>, I<SymOrRem>, "
9191 "I<LocSend>, or I<None>; I<SymOrRem> is the default. The different modes "
9192 "have the following meaning:"
9196 #: build/C/man4/sk98lin.4:313 build/C/man4/sk98lin.4:345
9201 " both link partners are allowed to send PAUSE frames\n"
9205 #: build/C/man4/sk98lin.4:317 build/C/man4/sk98lin.4:349
9209 "= SymmetricOrRemote\n"
9210 " both or only remote partner are allowed to send PAUSE frames\n"
9214 #: build/C/man4/sk98lin.4:321 build/C/man4/sk98lin.4:353
9219 " only local link partner is allowed to send PAUSE frames\n"
9223 #: build/C/man4/sk98lin.4:325 build/C/man4/sk98lin.4:357
9228 " no link partner is allowed to send PAUSE frames\n"
9232 #: build/C/man4/sk98lin.4:328
9233 msgid "Note that this parameter is ignored if AutoNeg_A is set to I<Off>."
9237 #: build/C/man4/sk98lin.4:328
9239 msgid "B<FlowCtrl_B=>I<i,j,...>"
9243 #: build/C/man4/sk98lin.4:361
9244 msgid "Note that this parameter is ignored if AutoNeg_B is set to I<Off>."
9248 #: build/C/man4/sk98lin.4:361
9250 msgid "B<Role_A=>I<i,j,...>"
9254 #: build/C/man4/sk98lin.4:377
9256 "This parameter is valid only for 1000Base-T adapter cards. For two "
9257 "1000Base-T ports to communicate, one must take the role of the master "
9258 "(providing timing information), while the other must be the slave. Possible "
9259 "values are: I<Auto>, I<Master>, or I<Slave>; I<Auto> is the default. "
9260 "Usually, the role of a port is negotiated between two ports during link "
9261 "establishment, but if that fails the port A of an adapter card can be forced "
9262 "to a specific setting with this parameter."
9266 #: build/C/man4/sk98lin.4:377
9268 msgid "B<Role_B=>I<i,j,...>"
9272 #: build/C/man4/sk98lin.4:394
9274 "This parameter is valid only for 1000Base-T adapter cards. For two "
9275 "1000Base-T ports to communicate, one must take the role of the master "
9276 "(providing timing information), while the other must be the slave. Possible "
9277 "values are: I<Auto>, I<Master>, or I<Slave>; I<Auto> is the default. "
9278 "Usually, the role of a port is negotiated between two ports during link "
9279 "establishment, but if that fails the port B of an adapter card can be forced "
9280 "to a specific setting with this parameter."
9284 #: build/C/man4/sk98lin.4:394
9286 msgid "B<ConType=>I<i,j,...>"
9290 #: build/C/man4/sk98lin.4:402
9292 "This parameter is a combination of all five per-port parameters within one "
9293 "single parameter. This simplifies the configuration of both ports of an "
9294 "adapter card. The different values of this variable reflect the most "
9295 "meaningful combinations of port parameters. Possible values and their "
9296 "corresponding combination of per-port parameters:"
9300 #: build/C/man4/sk98lin.4:407
9303 "ConType | DupCap AutoNeg FlowCtrl Role Speed\n"
9304 "--------+-------------------------------------------\n"
9305 "I<Auto> | Both On SymOrRem Auto Auto\n"
9309 #: build/C/man4/sk98lin.4:409
9311 msgid "I<100FD> | Full Off None Auto 100\n"
9315 #: build/C/man4/sk98lin.4:411
9317 msgid "I<100HD> | Half Off None Auto 100\n"
9321 #: build/C/man4/sk98lin.4:413
9323 msgid "I<10FD> | Full Off None Auto 10\n"
9327 #: build/C/man4/sk98lin.4:415
9329 msgid "I<10HD> | Half Off None Auto 10\n"
9333 #: build/C/man4/sk98lin.4:425
9335 "Stating any other port parameter together with this I<ConType> parameter "
9336 "will result in a merged configuration of those settings. This is due to the "
9337 "fact, that the per-port parameters (e.g., I<Speed_A>) have a higher "
9338 "priority than the combined variable I<ConType>."
9342 #: build/C/man4/sk98lin.4:425
9344 msgid "B<Moderation=>I<i,j,...>"
9348 #: build/C/man4/sk98lin.4:442
9350 "Interrupt moderation is employed to limit the maximum number of interrupts "
9351 "the driver has to serve. That is, one or more interrupts (which indicate "
9352 "any transmit or receive packet to be processed) are queued until the driver "
9353 "processes them. When queued interrupts are to be served, is determined by "
9354 "the I<IntsPerSec> parameter, which is explained later below. Possible "
9355 "moderation modes are: I<None>, I<Static>, or I<Dynamic>; I<None> is the "
9356 "default. The different modes have the following meaning:"
9360 #: build/C/man4/sk98lin.4:447
9362 "I<None> No interrupt moderation is applied on the adapter card. Therefore, "
9363 "each transmit or receive interrupt is served immediately as soon as it "
9364 "appears on the interrupt line of the adapter card."
9368 #: build/C/man4/sk98lin.4:462
9370 "I<Static> Interrupt moderation is applied on the adapter card. All transmit "
9371 "and receive interrupts are queued until a complete moderation interval "
9372 "ends. If such a moderation interval ends, all queued interrupts are "
9373 "processed in one big bunch without any delay. The term I<Static> reflects "
9374 "the fact, that interrupt moderation is always enabled, regardless how much "
9375 "network load is currently passing via a particular interface. In addition, "
9376 "the duration of the moderation interval has a fixed length that never "
9377 "changes while the driver is operational."
9381 #: build/C/man4/sk98lin.4:473
9383 "I<Dynamic> Interrupt moderation might be applied on the adapter card, "
9384 "depending on the load of the system. If the driver detects that the system "
9385 "load is too high, the driver tries to shield the system against too much "
9386 "network load by enabling interrupt moderation. If\\(emat a later "
9387 "time\\(emthe CPU utilization decreases again (or if the network load is "
9388 "negligible), the interrupt moderation will automatically be disabled."
9392 #: build/C/man4/sk98lin.4:479
9394 "Interrupt moderation should be used when the driver has to handle one or "
9395 "more interfaces with a high network load, which\\(emas a "
9396 "consequence\\(emleads also to a high CPU utilization. When moderation is "
9397 "applied in such high network load situations, CPU load might be reduced by "
9398 "20-30% on slow computers."
9402 #: build/C/man4/sk98lin.4:483
9404 "Note that the drawback of using interrupt moderation is an increase of the "
9405 "round-trip-time (RTT), due to the queuing and serving of interrupts at "
9406 "dedicated moderation times."
9410 #: build/C/man4/sk98lin.4:483
9412 msgid "B<IntsPerSec=>I<i,j,...>"
9416 #: build/C/man4/sk98lin.4:493
9418 "This parameter determines the length of any interrupt moderation interval. "
9419 "Assuming that static interrupt moderation is to be used, an I<IntsPerSec> "
9420 "parameter value of 2000 will lead to an interrupt moderation interval of 500 "
9421 "microseconds. Possible values for this parameter are in the range of "
9422 "30...40000 (interrupts per second). The default value is 2000."
9426 #: build/C/man4/sk98lin.4:497
9428 "This parameter is used only if either static or dynamic interrupt moderation "
9429 "is enabled on a network adapter card. This parameter is ignored if no "
9430 "moderation is applied."
9434 #: build/C/man4/sk98lin.4:504
9436 "Note that the duration of the moderation interval is to be chosen with "
9437 "care. At first glance, selecting a very long duration (e.g., only 100 "
9438 "interrupts per second) seems to be meaningful, but the increase of "
9439 "packet-processing delay is tremendous. On the other hand, selecting a very "
9440 "short moderation time might compensate the use of any moderation being "
9445 #: build/C/man4/sk98lin.4:504
9447 msgid "B<PrefPort=>I<i,j,...>"
9451 #: build/C/man4/sk98lin.4:516
9453 "This parameter is used to force the preferred port to A or B (on dual-port "
9454 "network adapters). The preferred port is the one that is used if both ports "
9455 "A and B are detected as fully functional. Possible values are: I<A> or "
9456 "I<B>; I<A> is the default."
9460 #: build/C/man4/sk98lin.4:516
9462 msgid "B<RlmtMode=>I<i,j,...>"
9466 #: build/C/man4/sk98lin.4:532
9468 "RLMT monitors the status of the port. If the link of the active port fails, "
9469 "RLMT switches immediately to the standby link. The virtual link is "
9470 "maintained as long as at least one \"physical\" link is up. This parameters "
9471 "states how RLMT should monitor both ports. Possible values are: "
9472 "I<CheckLinkState>, I<CheckLocalPort>, I<CheckSeg>, or I<DualNet>; "
9473 "I<CheckLinkState> is the default. The different modes have the following "
9478 #: build/C/man4/sk98lin.4:537
9480 "I<CheckLinkState> Check link state only: RLMT uses the link state reported "
9481 "by the adapter hardware for each individual port to determine whether a port "
9482 "can be used for all network traffic or not."
9486 #: build/C/man4/sk98lin.4:545
9488 "I<CheckLocalPort> In this mode, RLMT monitors the network path between the "
9489 "two ports of an adapter by regularly exchanging packets between them. This "
9490 "mode requires a network configuration in which the two ports are able to "
9491 "\"see\" each other (i.e., there must not be any router between the ports)."
9495 #: build/C/man4/sk98lin.4:554
9497 "I<CheckSeg> Check local port and segmentation: This mode supports the same "
9498 "functions as the CheckLocalPort mode and additionally checks network "
9499 "segmentation between the ports. Therefore, this mode is to be used only if "
9500 "Gigabit Ethernet switches are installed on the network that have been "
9501 "configured to use the Spanning Tree protocol."
9505 #: build/C/man4/sk98lin.4:565
9507 "I<DualNet> In this mode, ports A and B are used as separate devices. If you "
9508 "have a dual port adapter, port A will be configured as I<eth[x]> and port B "
9509 "as I<eth[x+1]>. Both ports can be used independently with distinct IP "
9510 "addresses. The preferred port setting is not used. RLMT is turned off."
9514 #: build/C/man4/sk98lin.4:574
9516 "Note that RLMT modes I<CheckLocalPort> and I<CheckLinkState> are designed to "
9517 "operate in configurations where a network path between the ports on one "
9518 "adapter exists. Moreover, they are not designed to work where adapters are "
9519 "connected back-to-back."
9523 #: build/C/man4/sk98lin.4:575
9525 msgid "I</proc/net/sk98lin/eth[x]>"
9529 #: build/C/man4/sk98lin.4:581
9531 "The statistics file of a particular interface of an adapter card. It "
9532 "contains generic information about the adapter card plus a detailed summary "
9533 "of all transmit and receive counters."
9537 #: build/C/man4/sk98lin.4:581
9539 msgid "I</usr/src/linux/Documentation/networking/sk98lin.txt>"
9543 #: build/C/man4/sk98lin.4:592
9545 "This is the I<README> file of the I<sk98lin> driver. It contains a detailed "
9546 "installation HOWTO and describes all parameters of the driver. It denotes "
9547 "also common problems and provides the solution to them."
9551 #. Ralph Roesler \(em rroesler@syskonnect.de
9553 #. Mirko Lindner \(em mlindner@syskonnect.de
9555 #: build/C/man4/sk98lin.4:598
9556 msgid "Report any bugs to linux@syskonnect.de"
9560 #: build/C/man4/sk98lin.4:602
9561 msgid "B<ifconfig>(8), B<insmod>(8), B<modprobe>(8)"
9565 #: build/C/man4/st.4:25
9571 #: build/C/man4/st.4:28
9572 msgid "st - SCSI tape device"
9576 #: build/C/man4/st.4:31
9578 msgid "B<#include E<lt>sys/mtio.hE<gt>>\n"
9582 #: build/C/man4/st.4:36
9585 "B<int ioctl(int >I<fd>B<, int >I<request>B< [, (void *)>I<arg3>B<]);>\n"
9586 "B<int ioctl(int >I<fd>B<, MTIOCTOP, (struct mtop *)>I<mt_cmd>B<);>\n"
9587 "B<int ioctl(int >I<fd>B<, MTIOCGET, (struct mtget *)>I<mt_status>B<);>\n"
9588 "B<int ioctl(int >I<fd>B<, MTIOCPOS, (struct mtpos *)>I<mt_pos>B<);>\n"
9592 #: build/C/man4/st.4:46
9594 "The B<st> driver provides the interface to a variety of SCSI tape devices. "
9595 "Currently, the driver takes control of all detected devices of type "
9596 "\\(lqsequential-access\\(rq. The B<st> driver uses major device number 9."
9600 #: build/C/man4/st.4:66
9602 "Each device uses eight minor device numbers. The lowermost five bits in the "
9603 "minor numbers are assigned sequentially in the order of detection. In the "
9604 "2.6 kernel, the bits above the eight lowermost bits are concatenated to the "
9605 "five lowermost bits to form the tape number. The minor numbers can be "
9606 "grouped into two sets of four numbers: the principal (auto-rewind) minor "
9607 "device numbers, I<n>, and the \\(lqno-rewind\\(rq device numbers, (I<n> + "
9608 "128). Devices opened using the principal device number will be sent a "
9609 "B<REWIND> command when they are closed. Devices opened using the "
9610 "\\(lqno-rewind\\(rq device number will not. (Note that using an auto-rewind "
9611 "device for positioning the tape with, for instance, mt does not lead to the "
9612 "desired result: the tape is rewound after the mt command and the next "
9613 "command starts from the beginning of the tape)."
9617 #: build/C/man4/st.4:80
9619 "Within each group, four minor numbers are available to define devices with "
9620 "different characteristics (block size, compression, density, etc.) When the "
9621 "system starts up, only the first device is available. The other three are "
9622 "activated when the default characteristics are defined (see below). (By "
9623 "changing compile-time constants, it is possible to change the balance "
9624 "between the maximum number of tape drives and the number of minor numbers "
9625 "for each drive. The default allocation allows control of 32 tape drives. "
9626 "For instance, it is possible to control up to 64 tape drives with two minor "
9627 "numbers for different options.)"
9631 #: build/C/man4/st.4:82
9632 msgid "Devices are typically created by:"
9636 #: build/C/man4/st.4:93
9639 "mknod -m 666 /dev/st0 c 9 0\n"
9640 "mknod -m 666 /dev/st0l c 9 32\n"
9641 "mknod -m 666 /dev/st0m c 9 64\n"
9642 "mknod -m 666 /dev/st0a c 9 96\n"
9643 "mknod -m 666 /dev/nst0 c 9 128\n"
9644 "mknod -m 666 /dev/nst0l c 9 160\n"
9645 "mknod -m 666 /dev/nst0m c 9 192\n"
9646 "mknod -m 666 /dev/nst0a c 9 224\n"
9650 #: build/C/man4/st.4:97
9651 msgid "There is no corresponding block device."
9655 #: build/C/man4/st.4:112
9657 "The driver uses an internal buffer that has to be large enough to hold at "
9658 "least one tape block. In kernels before 2.1.121, the buffer is allocated as "
9659 "one contiguous block. This limits the block size to the largest contiguous "
9660 "block of memory the kernel allocator can provide. The limit is currently "
9661 "128 kB for 32-bit architectures and 256 kB for 64-bit architectures. In "
9662 "newer kernels the driver allocates the buffer in several parts if "
9663 "necessary. By default, the maximum number of parts is 16. This means that "
9664 "the maximum block size is very large (2 MB if allocation of 16 blocks of 128 "
9669 #: build/C/man4/st.4:121
9671 "The driver's internal buffer size is determined by a compile-time constant "
9672 "which can be overridden with a kernel startup option. In addition to this, "
9673 "the driver tries to allocate a larger temporary buffer at run time if "
9674 "necessary. However, run-time allocation of large contiguous blocks of "
9675 "memory may fail and it is advisable not to rely too much on dynamic buffer "
9676 "allocation with kernels older than 2.1.121 (this applies also to "
9677 "demand-loading the driver with kerneld or kmod)."
9681 #: build/C/man4/st.4:134
9683 "The driver does not specifically support any tape drive brand or model. "
9684 "After system start-up the tape device options are defined by the drive "
9685 "firmware. For example, if the drive firmware selects fixed-block mode, the "
9686 "tape device uses fixed-block mode. The options can be changed with explicit "
9687 "B<ioctl>(2) calls and remain in effect when the device is closed and "
9688 "reopened. Setting the options affects both the auto-rewind and the "
9693 #: build/C/man4/st.4:143
9695 "Different options can be specified for the different devices within the "
9696 "subgroup of four. The options take effect when the device is opened. For "
9697 "example, the system administrator can define one device that writes in "
9698 "fixed-block mode with a certain block size, and one which writes in "
9699 "variable-block mode (if the drive supports both modes)."
9703 #: build/C/man4/st.4:166
9705 "The driver supports B<tape partitions> if they are supported by the drive. "
9706 "(Note that the tape partitions have nothing to do with disk partitions. A "
9707 "partitioned tape can be seen as several logical tapes within one medium.) "
9708 "Partition support has to be enabled with an B<ioctl>(2). The tape location "
9709 "is preserved within each partition across partition changes. The partition "
9710 "used for subsequent tape operations is selected with an B<ioctl>(2). The "
9711 "partition switch is executed together with the next tape operation in order "
9712 "to avoid unnecessary tape movement. The maximum number of partitions on a "
9713 "tape is defined by a compile-time constant (originally four). The driver "
9714 "contains an B<ioctl>(2) that can format a tape with either one or two "
9719 #: build/C/man4/st.4:171
9721 "Device I</dev/tape> is usually created as a hard or soft link to the default "
9722 "tape device on the system."
9726 #: build/C/man4/st.4:175
9728 "Starting from kernel 2.6.2, the driver exports in the sysfs directory "
9729 "I</sys/class/scsi_tape> the attached devices and some parameters assigned to "
9734 #: build/C/man4/st.4:175
9736 msgid "Data transfer"
9740 #: build/C/man4/st.4:188
9742 "The driver supports operation in both fixed-block mode and variable-block "
9743 "mode (if supported by the drive). In fixed-block mode the drive writes "
9744 "blocks of the specified size and the block size is not dependent on the byte "
9745 "counts of the write system calls. In variable-block mode one tape block is "
9746 "written for each write call and the byte count determines the size of the "
9747 "corresponding tape block. Note that the blocks on the tape don't contain "
9748 "any information about the writing mode: when reading, the only important "
9749 "thing is to use commands that accept the block sizes on the tape."
9753 #: build/C/man4/st.4:197
9755 "In variable-block mode the read byte count does not have to match the tape "
9756 "block size exactly. If the byte count is larger than the next block on "
9757 "tape, the driver returns the data and the function returns the actual block "
9758 "size. If the block size is larger than the byte count, the requested amount "
9759 "of data from the start of the block is returned and the rest of the block is "
9764 #: build/C/man4/st.4:206
9766 "In fixed-block mode the read byte counts can be arbitrary if buffering is "
9767 "enabled, or a multiple of the tape block size if buffering is disabled. "
9768 "Kernels before 2.1.121 allow writes with arbitrary byte count if buffering "
9769 "is enabled. In all other cases (kernel before 2.1.121 with buffering "
9770 "disabled or newer kernel) the write byte count must be a multiple of the "
9775 #: build/C/man4/st.4:215
9777 "In the 2.6 kernel, the driver tries to use direct transfers between the user "
9778 "buffer and the device. If this is not possible, the driver's internal "
9779 "buffer is used. The reasons for not using direct transfers include improper "
9780 "alignment of the user buffer (default is 512 bytes but this can be changed "
9781 "by the HBA driver), one or more pages of the user buffer not reachable by "
9782 "the SCSI adapter, and so on."
9786 #: build/C/man4/st.4:218
9788 "A filemark is automatically written to tape if the last tape operation "
9789 "before close was a write."
9793 #: build/C/man4/st.4:230
9795 "When a filemark is encountered while reading, the following happens. If "
9796 "there are data remaining in the buffer when the filemark is found, the "
9797 "buffered data is returned. The next read returns zero bytes. The following "
9798 "read returns data from the next file. The end of recorded data is signaled "
9799 "by returning zero bytes for two consecutive read calls. The third read "
9804 #: build/C/man4/st.4:230
9810 #: build/C/man4/st.4:241
9812 "The driver supports three B<ioctl>(2) requests. Requests not recognized by "
9813 "the B<st> driver are passed to the B<SCSI> driver. The definitions below "
9814 "are from I</usr/include/linux/mtio.h>:"
9818 #: build/C/man4/st.4:241
9820 msgid "MTIOCTOP \\(em perform a tape operation"
9824 #: build/C/man4/st.4:249
9826 "This request takes an argument of type I<(struct mtop\\ *)>. Not all drives "
9827 "support all operations. The driver returns an B<EIO> error if the drive "
9828 "rejects an operation."
9832 #: build/C/man4/st.4:257
9835 "/* Structure for MTIOCTOP - mag tape op command: */\n"
9837 " short mt_op; /* operations defined below */\n"
9838 " int mt_count; /* how many of them */\n"
9843 #: build/C/man4/st.4:261
9844 msgid "Magnetic Tape operations for normal tape use:"
9848 #: build/C/man4/st.4:261
9854 #: build/C/man4/st.4:266
9855 msgid "Backward space over I<mt_count> filemarks."
9859 #: build/C/man4/st.4:266
9865 #: build/C/man4/st.4:272
9867 "Backward space over I<mt_count> filemarks. Reposition the tape to the EOT "
9868 "side of the last filemark."
9872 #: build/C/man4/st.4:272
9878 #: build/C/man4/st.4:277
9879 msgid "Backward space over I<mt_count> records (tape blocks)."
9883 #: build/C/man4/st.4:277
9889 #: build/C/man4/st.4:282
9890 msgid "Backward space over I<mt_count> setmarks."
9894 #: build/C/man4/st.4:282
9896 msgid "B<MTCOMPRESSION>"
9900 #: build/C/man4/st.4:290
9902 "Enable compression of tape data within the drive if I<mt_count> is nonzero "
9903 "and disable compression if I<mt_count> is zero. This command uses the MODE "
9904 "page 15 supported by most DATs."
9908 #: build/C/man4/st.4:290
9914 #: build/C/man4/st.4:293
9915 msgid "Go to the end of the recorded media (for appending files)."
9919 #: build/C/man4/st.4:293
9925 #: build/C/man4/st.4:299
9927 "Erase tape. With 2.6 kernel, short erase (mark tape empty) is performed if "
9928 "the argument is zero. Otherwise, long erase (erase all) is done."
9932 #: build/C/man4/st.4:299
9938 #: build/C/man4/st.4:304
9939 msgid "Forward space over I<mt_count> filemarks."
9943 #: build/C/man4/st.4:304
9949 #: build/C/man4/st.4:310
9951 "Forward space over I<mt_count> filemarks. Reposition the tape to the BOT "
9952 "side of the last filemark."
9956 #: build/C/man4/st.4:310
9962 #: build/C/man4/st.4:315
9963 msgid "Forward space over I<mt_count> records (tape blocks)."
9967 #: build/C/man4/st.4:315
9973 #: build/C/man4/st.4:320
9974 msgid "Forward space over I<mt_count> setmarks."
9978 #: build/C/man4/st.4:320
9984 #: build/C/man4/st.4:331
9986 "Execute the SCSI load command. A special case is available for some HP "
9987 "autoloaders. If I<mt_count> is the constant B<MT_ST_HPLOADER_OFFSET> plus a "
9988 "number, the number is sent to the drive to control the autoloader."
9992 #: build/C/man4/st.4:331
9998 #: build/C/man4/st.4:334
9999 msgid "Lock the tape drive door."
10003 #: build/C/man4/st.4:334
10005 msgid "B<MTMKPART>"
10008 #. type: Plain text
10009 #: build/C/man4/st.4:348
10011 "Format the tape into one or two partitions. If I<mt_count> is nonzero, it "
10012 "gives the size of the first partition and the second partition contains the "
10013 "rest of the tape. If I<mt_count> is zero, the tape is formatted into one "
10014 "partition. This command is not allowed for a drive unless the partition "
10015 "support is enabled for the drive (see B<MT_ST_CAN_PARTITIONS> below)."
10019 #: build/C/man4/st.4:348
10024 #. type: Plain text
10025 #: build/C/man4/st.4:353
10027 "No op\\(emflushes the driver's buffer as a side effect. Should be used "
10028 "before reading status with B<MTIOCGET>."
10032 #: build/C/man4/st.4:353
10037 #. type: Plain text
10038 #: build/C/man4/st.4:356
10039 msgid "Rewind and put the drive off line."
10043 #: build/C/man4/st.4:356
10048 #. type: Plain text
10049 #: build/C/man4/st.4:359
10050 msgid "Reset drive."
10054 #: build/C/man4/st.4:359
10059 #. type: Plain text
10060 #: build/C/man4/st.4:362
10061 msgid "Re-tension tape."
10065 #: build/C/man4/st.4:362
10070 #. type: Plain text
10071 #: build/C/man4/st.4:365
10076 #: build/C/man4/st.4:365
10081 #. type: Plain text
10082 #: build/C/man4/st.4:377
10084 "Seek to the tape block number specified in I<mt_count>. This operation "
10085 "requires either a SCSI-2 drive that supports the B<LOCATE> command "
10086 "(device-specific address) or a Tandberg-compatible SCSI-1 drive (Tandberg, "
10087 "Archive Viper, Wangtek, ...). The block number should be one that was "
10088 "previously returned by B<MTIOCPOS> if device-specific addresses are used."
10092 #: build/C/man4/st.4:377
10094 msgid "B<MTSETBLK>"
10097 #. type: Plain text
10098 #: build/C/man4/st.4:382
10100 "Set the drive's block length to the value specified in I<mt_count>. A block "
10101 "length of zero sets the drive to variable block size mode."
10105 #: build/C/man4/st.4:382
10107 msgid "B<MTSETDENSITY>"
10110 #. type: Plain text
10111 #: build/C/man4/st.4:388
10113 "Set the tape density to the code in I<mt_count>. The density codes "
10114 "supported by a drive can be found from the drive documentation."
10118 #: build/C/man4/st.4:388
10120 msgid "B<MTSETPART>"
10123 #. type: Plain text
10124 #: build/C/man4/st.4:397
10126 "The active partition is switched to I<mt_count>. The partitions are "
10127 "numbered from zero. This command is not allowed for a drive unless the "
10128 "partition support is enabled for the drive (see B<MT_ST_CAN_PARTITIONS> "
10133 #: build/C/man4/st.4:397
10135 msgid "B<MTUNLOAD>"
10138 #. type: Plain text
10139 #: build/C/man4/st.4:400
10140 msgid "Execute the SCSI unload command (does not eject the tape)."
10144 #: build/C/man4/st.4:400
10146 msgid "B<MTUNLOCK>"
10149 #. type: Plain text
10150 #: build/C/man4/st.4:403
10151 msgid "Unlock the tape drive door."
10155 #: build/C/man4/st.4:403
10160 #. type: Plain text
10161 #: build/C/man4/st.4:408
10162 msgid "Write I<mt_count> filemarks."
10166 #: build/C/man4/st.4:408
10171 #. type: Plain text
10172 #: build/C/man4/st.4:413
10173 msgid "Write I<mt_count> setmarks."
10176 #. type: Plain text
10177 #: build/C/man4/st.4:415
10178 msgid "Magnetic Tape operations for setting of device options (by the superuser):"
10182 #: build/C/man4/st.4:415
10184 msgid "B<MTSETDRVBUFFER>"
10187 #. type: Plain text
10188 #: build/C/man4/st.4:424
10190 "Set various drive and driver options according to bits encoded in "
10191 "I<mt_count>. These consist of the drive's buffering mode, a set of Boolean "
10192 "driver options, the buffer write threshold, defaults for the block size and "
10193 "density, and timeouts (only in kernels 2.1 and later). A single operation "
10194 "can affect only one item in the list above (the Booleans counted as one "
10198 #. type: Plain text
10199 #: build/C/man4/st.4:428
10201 "A value having zeros in the high-order 4 bits will be used to set the "
10202 "drive's buffering mode. The buffering modes are:"
10206 #: build/C/man4/st.4:429
10211 #. type: Plain text
10212 #: build/C/man4/st.4:434
10214 "The drive will not report B<GOOD> status on write commands until the data "
10215 "blocks are actually written to the medium."
10219 #: build/C/man4/st.4:434
10224 #. type: Plain text
10225 #: build/C/man4/st.4:439
10227 "The drive may report B<GOOD> status on write commands as soon as all the "
10228 "data has been transferred to the drive's internal buffer."
10232 #: build/C/man4/st.4:439
10237 #. type: Plain text
10238 #: build/C/man4/st.4:446
10240 "The drive may report B<GOOD> status on write commands as soon as (a) all the "
10241 "data has been transferred to the drive's internal buffer, and (b) all "
10242 "buffered data from different initiators has been successfully written to the "
10246 #. type: Plain text
10247 #: build/C/man4/st.4:457
10249 "To control the write threshold the value in I<mt_count> must include the "
10250 "constant B<MT_ST_WRITE_THRESHOLD> bitwise ORed with a block count in the low "
10251 "28 bits. The block count refers to 1024-byte blocks, not the physical block "
10252 "size on the tape. The threshold cannot exceed the driver's internal buffer "
10253 "size (see DESCRIPTION, above)."
10256 #. type: Plain text
10257 #: build/C/man4/st.4:478
10259 "To set and clear the Boolean options the value in I<mt_count> must include "
10260 "one of the constants B<MT_ST_BOOLEANS>, B<MT_ST_SETBOOLEANS>, "
10261 "B<MT_ST_CLEARBOOLEANS>, or B<MT_ST_DEFBOOLEANS> bitwise ORed with whatever "
10262 "combination of the following options is desired. Using B<MT_ST_BOOLEANS> "
10263 "the options can be set to the values defined in the corresponding bits. "
10264 "With B<MT_ST_SETBOOLEANS> the options can be selectively set and with "
10265 "B<MT_ST_DEFBOOLEANS> selectively cleared."
10268 #. type: Plain text
10269 #: build/C/man4/st.4:486
10271 "The default options for a tape device are set with B<MT_ST_DEFBOOLEANS>. A "
10272 "nonactive tape device (e.g., device with minor 32 or 160) is activated when "
10273 "the default options for it are defined the first time. An activated device "
10274 "inherits from the device activated at start-up the options not set "
10278 #. type: Plain text
10279 #: build/C/man4/st.4:488
10280 msgid "The Boolean options are:"
10284 #: build/C/man4/st.4:489
10286 msgid "B<MT_ST_BUFFER_WRITES> (Default: true)"
10289 #. type: Plain text
10290 #: build/C/man4/st.4:495
10292 "Buffer all write operations in fixed-block mode. If this option is false "
10293 "and the drive uses a fixed block size, then all write operations must be for "
10294 "a multiple of the block size. This option must be set false to write "
10295 "reliable multivolume archives."
10299 #: build/C/man4/st.4:495
10301 msgid "B<MT_ST_ASYNC_WRITES> (Default: true)"
10304 #. type: Plain text
10305 #: build/C/man4/st.4:505
10307 "When this option is true, write operations return immediately without "
10308 "waiting for the data to be transferred to the drive if the data fits into "
10309 "the driver's buffer. The write threshold determines how full the buffer "
10310 "must be before a new SCSI write command is issued. Any errors reported by "
10311 "the drive will be held until the next operation. This option must be set "
10312 "false to write reliable multivolume archives."
10316 #: build/C/man4/st.4:505
10318 msgid "B<MT_ST_READ_AHEAD> (Default: true)"
10321 #. type: Plain text
10322 #: build/C/man4/st.4:511
10324 "This option causes the driver to provide read buffering and read-ahead in "
10325 "fixed-block mode. If this option is false and the drive uses a fixed block "
10326 "size, then all read operations must be for a multiple of the block size."
10330 #: build/C/man4/st.4:511
10332 msgid "B<MT_ST_TWO_FM> (Default: false)"
10335 #. type: Plain text
10336 #: build/C/man4/st.4:517
10338 "This option modifies the driver behavior when a file is closed. The normal "
10339 "action is to write a single filemark. If the option is true, the driver "
10340 "will write two filemarks and backspace over the second one."
10343 #. type: Plain text
10344 #: build/C/man4/st.4:526
10346 "Note: This option should not be set true for QIC tape drives since they are "
10347 "unable to overwrite a filemark. These drives detect the end of recorded "
10348 "data by testing for blank tape rather than two consecutive filemarks. Most "
10349 "other current drives also detect the end of recorded data and using two "
10350 "filemarks is usually necessary only when interchanging tapes with some other "
10355 #: build/C/man4/st.4:526
10357 msgid "B<MT_ST_DEBUGGING> (Default: false)"
10360 #. type: Plain text
10361 #: build/C/man4/st.4:532
10363 "This option turns on various debugging messages from the driver (effective "
10364 "only if the driver was compiled with B<DEBUG> defined nonzero)."
10368 #: build/C/man4/st.4:532
10370 msgid "B<MT_ST_FAST_EOM> (Default: false)"
10373 #. type: Plain text
10374 #: build/C/man4/st.4:546
10376 "This option causes the B<MTEOM> operation to be sent directly to the drive, "
10377 "potentially speeding up the operation but causing the driver to lose track "
10378 "of the current file number normally returned by the B<MTIOCGET> request. If "
10379 "B<MT_ST_FAST_EOM> is false, the driver will respond to an B<MTEOM> request "
10380 "by forward spacing over files."
10384 #: build/C/man4/st.4:546
10386 msgid "B<MT_ST_AUTO_LOCK> (Default: false)"
10389 #. type: Plain text
10390 #: build/C/man4/st.4:550
10392 "When this option is true, the drive door is locked when the device is opened "
10393 "and unlocked when it is closed."
10397 #: build/C/man4/st.4:550
10399 msgid "B<MT_ST_DEF_WRITES> (Default: false)"
10402 #. type: Plain text
10403 #: build/C/man4/st.4:567
10405 "The tape options (block size, mode, compression, etc.) may change when "
10406 "changing from one device linked to a drive to another device linked to the "
10407 "same drive depending on how the devices are defined. This option defines "
10408 "when the changes are enforced by the driver using SCSI-commands and when the "
10409 "drives auto-detection capabilities are relied upon. If this option is "
10410 "false, the driver sends the SCSI-commands immediately when the device is "
10411 "changed. If the option is true, the SCSI-commands are not sent until a "
10412 "write is requested. In this case, the drive firmware is allowed to detect "
10413 "the tape structure when reading and the SCSI-commands are used only to make "
10414 "sure that a tape is written according to the correct specification."
10418 #: build/C/man4/st.4:567
10420 msgid "B<MT_ST_CAN_BSR> (Default: false)"
10423 #. type: Plain text
10424 #: build/C/man4/st.4:580
10426 "When read-ahead is used, the tape must sometimes be spaced backward to the "
10427 "correct position when the device is closed and the SCSI command to space "
10428 "backward over records is used for this purpose. Some older drives can't "
10429 "process this command reliably and this option can be used to instruct the "
10430 "driver not to use the command. The end result is that, with read-ahead and "
10431 "fixed-block mode, the tape may not be correctly positioned within a file "
10432 "when the device is closed. With 2.6 kernel, the default is true for drives "
10433 "supporting SCSI-3."
10437 #: build/C/man4/st.4:580
10439 msgid "B<MT_ST_NO_BLKLIMS> (Default: false)"
10442 #. type: Plain text
10443 #: build/C/man4/st.4:589
10445 "Some drives don't accept the B<READ BLOCK LIMITS> SCSI command. If this is "
10446 "used, the driver does not use the command. The drawback is that the driver "
10447 "can't check before sending commands if the selected block size is acceptable "
10452 #: build/C/man4/st.4:589
10454 msgid "B<MT_ST_CAN_PARTITIONS> (Default: false)"
10457 #. type: Plain text
10458 #: build/C/man4/st.4:594
10460 "This option enables support for several partitions within a tape. The "
10461 "option applies to all devices linked to a drive."
10465 #: build/C/man4/st.4:594
10467 msgid "B<MT_ST_SCSI2LOGICAL> (Default: false)"
10470 #. type: Plain text
10471 #: build/C/man4/st.4:609
10473 "This option instructs the driver to use the logical block addresses defined "
10474 "in the SCSI-2 standard when performing the seek and tell operations (both "
10475 "with B<MTSEEK> and B<MTIOCPOS> commands and when changing tape partition). "
10476 "Otherwise, the device-specific addresses are used. It is highly advisable "
10477 "to set this option if the drive supports the logical addresses because they "
10478 "count also filemarks. There are some drives that support only the logical "
10483 #: build/C/man4/st.4:609
10485 msgid "B<MT_ST_SYSV> (Default: false)"
10488 #. type: Plain text
10489 #: build/C/man4/st.4:620
10491 "When this option is enabled, the tape devices use the SystemV semantics. "
10492 "Otherwise, the BSD semantics are used. The most important difference "
10493 "between the semantics is what happens when a device used for reading is "
10494 "closed: in System V semantics the tape is spaced forward past the next "
10495 "filemark if this has not happened while using the device. In BSD semantics "
10496 "the tape position is not changed."
10500 #: build/C/man4/st.4:620
10502 msgid "B<MT_NO_WAIT> (Default: false)"
10505 #. type: Plain text
10506 #: build/C/man4/st.4:624
10508 "Enables immediate mode (i.e., don't wait for the command to finish) for some "
10509 "commands (e.g., rewind)."
10512 #. type: Plain text
10513 #: build/C/man4/st.4:626
10514 msgid "An example:"
10517 #. type: Plain text
10518 #: build/C/man4/st.4:634
10521 "struct mtop mt_cmd;\n"
10522 "mt_cmd.mt_op = MTSETDRVBUFFER;\n"
10523 "mt_cmd.mt_count = MT_ST_BOOLEANS |\n"
10524 " MT_ST_BUFFER_WRITES | MT_ST_ASYNC_WRITES;\n"
10525 "ioctl(fd, MTIOCTOP, mt_cmd);\n"
10528 #. type: Plain text
10529 #: build/C/man4/st.4:644
10531 "The default block size for a device can be set with B<MT_ST_DEF_BLKSIZE> and "
10532 "the default density code can be set with B<MT_ST_DEFDENSITY>. The values "
10533 "for the parameters are or'ed with the operation code."
10536 #. type: Plain text
10537 #: build/C/man4/st.4:661
10539 "With kernels 2.1.x and later, the timeout values can be set with the "
10540 "subcommand B<MT_ST_SET_TIMEOUT> ORed with the timeout in seconds. The long "
10541 "timeout (used for rewinds and other commands that may take a long time) can "
10542 "be set with B<MT_ST_SET_LONG_TIMEOUT>. The kernel defaults are very long to "
10543 "make sure that a successful command is not timed out with any drive. "
10544 "Because of this the driver may seem stuck even if it is only waiting for the "
10545 "timeout. These commands can be used to set more practical values for a "
10546 "specific drive. The timeouts set for one device apply for all devices "
10547 "linked to the same drive."
10550 #. type: Plain text
10551 #: build/C/man4/st.4:682
10553 "Starting from kernels 2.4.19 and 2.5.43, the driver supports a status bit "
10554 "which indicates whether the drive requests cleaning. The method used by the "
10555 "drive to return cleaning information is set using the B<MT_ST_SEL_CLN> "
10556 "subcommand. If the value is zero, the cleaning bit is always zero. If the "
10557 "value is one, the TapeAlert data defined in the SCSI-3 standard is used (not "
10558 "yet implemented). Values 2-17 are reserved. If the lowest eight bits are "
10559 "E<gt>= 18, bits from the extended sense data are used. The bits 9-16 "
10560 "specify a mask to select the bits to look at and the bits 17-23 specify the "
10561 "bit pattern to look for. If the bit pattern is zero, one or more bits under "
10562 "the mask indicate the cleaning request. If the pattern is nonzero, the "
10563 "pattern must match the masked sense data byte."
10567 #: build/C/man4/st.4:682
10569 msgid "MTIOCGET \\(em get status"
10572 #. type: Plain text
10573 #: build/C/man4/st.4:686
10574 msgid "This request takes an argument of type I<(struct mtget\\ *)>."
10577 #. type: Plain text
10578 #: build/C/man4/st.4:701
10581 "/* structure for MTIOCGET - mag tape get status command */\n"
10584 " long mt_resid;\n"
10585 " /* the following registers are device dependent */\n"
10586 " long mt_dsreg;\n"
10587 " long mt_gstat;\n"
10588 " long mt_erreg;\n"
10589 " /* The next two fields are not always used */\n"
10590 " daddr_t mt_fileno;\n"
10591 " daddr_t mt_blkno;\n"
10596 #: build/C/man4/st.4:703
10601 #. type: Plain text
10602 #: build/C/man4/st.4:712
10604 "The header file defines many values for I<mt_type>, but the current driver "
10605 "reports only the generic types B<MT_ISSCSI1> (Generic SCSI-1 tape) and "
10606 "B<MT_ISSCSI2> (Generic SCSI-2 tape)."
10610 #: build/C/man4/st.4:712
10612 msgid "I<mt_resid>"
10615 #. type: Plain text
10616 #: build/C/man4/st.4:714
10617 msgid "contains the current tape partition number."
10621 #: build/C/man4/st.4:714
10623 msgid "I<mt_dsreg>"
10626 #. type: Plain text
10627 #: build/C/man4/st.4:723
10629 "reports the drive's current settings for block size (in the low 24 bits) and "
10630 "density (in the high 8 bits). These fields are defined by "
10631 "B<MT_ST_BLKSIZE_SHIFT>, B<MT_ST_BLKSIZE_MASK>, B<MT_ST_DENSITY_SHIFT>, and "
10632 "B<MT_ST_DENSITY_MASK>."
10636 #: build/C/man4/st.4:723
10638 msgid "I<mt_gstat>"
10641 #. type: Plain text
10642 #: build/C/man4/st.4:726
10644 "reports generic (device independent) status information. The header file "
10645 "defines macros for testing these status bits:"
10648 #. type: Plain text
10649 #: build/C/man4/st.4:733
10651 "B<GMT_EOF>(I<x>): The tape is positioned just after a filemark (always false "
10652 "after an B<MTSEEK> operation)."
10655 #. type: Plain text
10656 #: build/C/man4/st.4:739
10658 "B<GMT_BOT>(I<x>): The tape is positioned at the beginning of the first file "
10659 "(always false after an B<MTSEEK> operation)."
10662 #. type: Plain text
10663 #: build/C/man4/st.4:742
10664 msgid "B<GMT_EOT>(I<x>): A tape operation has reached the physical End Of Tape."
10667 #. type: Plain text
10668 #: build/C/man4/st.4:748
10670 "B<GMT_SM>(I<x>): The tape is currently positioned at a setmark (always false "
10671 "after an B<MTSEEK> operation)."
10674 #. type: Plain text
10675 #: build/C/man4/st.4:751
10676 msgid "B<GMT_EOD>(I<x>): The tape is positioned at the end of recorded data."
10679 #. type: Plain text
10680 #: build/C/man4/st.4:756
10682 "B<GMT_WR_PROT>(I<x>): The drive is write-protected. For some drives this "
10683 "can also mean that the drive does not support writing on the current medium "
10687 #. type: Plain text
10688 #: build/C/man4/st.4:761
10690 "B<GMT_ONLINE>(I<x>): The last B<open>(2) found the drive with a tape in "
10691 "place and ready for operation."
10694 #. type: Plain text
10695 #: build/C/man4/st.4:765
10697 "B<GMT_D_6250>(I<x>), B<GMT_D_1600>(I<x>), B<GMT_D_800>(I<x>): This "
10698 "\\(lqgeneric\\(rq status information reports the current density setting for "
10699 "9-track \\(12\" tape drives only."
10702 #. type: Plain text
10703 #: build/C/man4/st.4:768
10704 msgid "B<GMT_DR_OPEN>(I<x>): The drive does not have a tape in place."
10707 #. type: Plain text
10708 #: build/C/man4/st.4:776
10710 "B<GMT_IM_REP_EN>(I<x>): Immediate report mode. This bit is set if there are "
10711 "no guarantees that the data has been physically written to the tape when the "
10712 "write call returns. It is set zero only when the driver does not buffer "
10713 "data and the drive is set not to buffer data."
10716 #. type: Plain text
10717 #: build/C/man4/st.4:780
10719 "B<GMT_CLN>(I<x>): The drive has requested cleaning. Implemented in kernels "
10720 "since 2.4.19 and 2.5.43."
10724 #: build/C/man4/st.4:781
10726 msgid "I<mt_erreg>"
10729 #. type: Plain text
10730 #: build/C/man4/st.4:791
10732 "The only field defined in I<mt_erreg> is the recovered error count in the "
10733 "low 16 bits (as defined by B<MT_ST_SOFTERR_SHIFT> and "
10734 "B<MT_ST_SOFTERR_MASK>. Due to inconsistencies in the way drives report "
10735 "recovered errors, this count is often not maintained (most drives do not by "
10736 "default report soft errors but this can be changed with a SCSI MODE SELECT "
10741 #: build/C/man4/st.4:791
10743 msgid "I<mt_fileno>"
10746 #. type: Plain text
10747 #: build/C/man4/st.4:797
10749 "reports the current file number (zero-based). This value is set to -1 when "
10750 "the file number is unknown (e.g., after B<MTBSS> or B<MTSEEK>)."
10754 #: build/C/man4/st.4:797
10756 msgid "I<mt_blkno>"
10759 #. type: Plain text
10760 #: build/C/man4/st.4:804
10762 "reports the block number (zero-based) within the current file. This value "
10763 "is set to -1 when the block number is unknown (e.g., after B<MTBSF>, "
10764 "B<MTBSS>, or B<MTSEEK>)."
10768 #: build/C/man4/st.4:804
10770 msgid "MTIOCPOS \\(em get tape position"
10773 #. type: Plain text
10774 #: build/C/man4/st.4:818
10776 "This request takes an argument of type I<(struct mtpos\\ *)> and reports the "
10777 "drive's notion of the current tape block number, which is not the same as "
10778 "I<mt_blkno> returned by B<MTIOCGET>. This drive must be a SCSI-2 drive that "
10779 "supports the B<READ POSITION> command (device-specific address) or a "
10780 "Tandberg-compatible SCSI-1 drive (Tandberg, Archive Viper, Wangtek, ... )."
10783 #. type: Plain text
10784 #: build/C/man4/st.4:825
10787 "/* structure for MTIOCPOS - mag tape get position command */\n"
10789 " long mt_blkno; /* current block number */\n"
10793 #. type: Plain text
10794 #: build/C/man4/st.4:834
10796 "An attempt was made to write or erase a write-protected tape. (This error "
10797 "is not detected during B<open>(2).)"
10801 #: build/C/man4/st.4:834
10806 #. type: Plain text
10807 #: build/C/man4/st.4:838
10808 msgid "The device is already in use or the driver was unable to allocate a buffer."
10811 #. type: Plain text
10812 #: build/C/man4/st.4:842
10813 msgid "The command parameters point to memory not belonging to the calling process."
10816 #. type: Plain text
10817 #: build/C/man4/st.4:847
10819 "An B<ioctl>(2) had an invalid argument, or a requested block size was "
10824 #: build/C/man4/st.4:847
10829 #. type: Plain text
10830 #: build/C/man4/st.4:850
10831 msgid "The requested operation could not be completed."
10834 #. type: Plain text
10835 #: build/C/man4/st.4:857
10837 "The byte count in B<read>(2) is smaller than the next physical block on the "
10838 "tape. (Before 2.2.18 and 2.4.0-test6 the extra bytes have been silently "
10842 #. type: Plain text
10843 #: build/C/man4/st.4:861
10845 "A write operation could not be completed because the tape reached "
10850 #: build/C/man4/st.4:861 build/C/man2/syslog.2:278
10855 #. type: Plain text
10856 #: build/C/man4/st.4:865
10857 msgid "Unknown B<ioctl>(2)."
10861 #: build/C/man4/st.4:865
10866 #. type: Plain text
10867 #: build/C/man4/st.4:868
10868 msgid "During opening, the tape device does not exist."
10872 #: build/C/man4/st.4:868
10874 msgid "B<EOVERFLOW>"
10877 #. type: Plain text
10878 #: build/C/man4/st.4:872
10880 "An attempt was made to read or write a variable-length block that is larger "
10881 "than the driver's internal buffer."
10884 #. type: Plain text
10885 #: build/C/man4/st.4:879
10887 "Open is attempted with B<O_WRONLY> or B<O_RDWR> when the tape in the drive "
10888 "is write-protected."
10892 #: build/C/man4/st.4:880
10894 msgid "I</dev/st*>"
10897 #. type: Plain text
10898 #: build/C/man4/st.4:883
10899 msgid "the auto-rewind SCSI tape devices"
10903 #: build/C/man4/st.4:883
10905 msgid "I</dev/nst*>"
10909 #. The driver has been written by Kai M\(:akisara (Kai.Makisara@metla.fi)
10910 #. starting from a driver written by Dwayne Forsyth.
10912 #. people have also contributed to the driver.
10913 #. type: Plain text
10914 #: build/C/man4/st.4:891
10915 msgid "the nonrewind SCSI tape devices"
10918 #. type: Plain text
10919 #: build/C/man4/st.4:912
10921 "When exchanging data between systems, both systems have to agree on the "
10922 "physical tape block size. The parameters of a drive after startup are often "
10923 "not the ones most operating systems use with these devices. Most systems "
10924 "use drives in variable-block mode if the drive supports that mode. This "
10925 "applies to most modern drives, including DATs, 8mm helical scan drives, "
10926 "DLTs, etc. It may be advisable to use these drives in variable-block mode "
10927 "also in Linux (i.e., use B<MTSETBLK> or B<MTSETDEFBLK> at system startup to "
10928 "set the mode), at least when exchanging data with a foreign system. The "
10929 "drawback of this is that a fairly large tape block size has to be used to "
10930 "get acceptable data transfer rates on the SCSI bus."
10933 #. type: Plain text
10934 #: build/C/man4/st.4:919
10936 "Many programs (e.g., B<tar>(1)) allow the user to specify the blocking "
10937 "factor on the command line. Note that this determines the physical block "
10938 "size on tape only in variable-block mode."
10941 #. type: Plain text
10942 #: build/C/man4/st.4:926
10944 "In order to use SCSI tape drives, the basic SCSI driver, a SCSI-adapter "
10945 "driver and the SCSI tape driver must be either configured into the kernel or "
10946 "loaded as modules. If the SCSI-tape driver is not present, the drive is "
10947 "recognized but the tape support described in this page is not available."
10950 #. type: Plain text
10951 #: build/C/man4/st.4:931
10953 "The driver writes error messages to the console/log. The SENSE codes "
10954 "written into some messages are automatically translated to text if verbose "
10955 "SCSI messages are enabled in kernel configuration."
10959 #. Copyright \(co 1995 Robert K. Nichols.
10961 #. Copyright \(co 1999-2005 Kai M\(:akisara.
10963 #. %%%LICENSE_START(VERBATIM)
10964 #. Permission is granted to make and distribute verbatim copies of this
10965 #. manual provided the copyright notice and this permission notice are
10966 #. preserved on all copies.
10967 #. Additional permissions are contained in the header of the source file.
10968 #. type: Plain text
10969 #: build/C/man4/st.4:954
10971 "The driver's internal buffering allows good throughput in fixed-block mode "
10972 "also with small B<read>(2) and B<write>(2) byte counts. With direct "
10973 "transfers this is not possible and may cause a surprise when moving to the "
10974 "2.6 kernel. The solution is to tell the software to use larger transfers "
10975 "(often telling it to use larger blocks). If this is not possible, direct "
10976 "transfers can be disabled."
10979 #. type: Plain text
10980 #: build/C/man4/st.4:956
10984 #. type: Plain text
10985 #: build/C/man4/st.4:964
10987 "The file I<drivers/scsi/README.st> or I<Documentation/scsi/st.txt> (kernel "
10988 "E<gt>= 2.6) in the Linux kernel source tree contains the most recent "
10989 "information about the driver and its configuration possibilities"
10993 #: build/C/man3/stdarg.3:43
10999 #: build/C/man3/stdarg.3:43
11004 #. type: Plain text
11005 #: build/C/man3/stdarg.3:46
11006 msgid "stdarg, va_start, va_arg, va_end, va_copy - variable argument lists"
11009 #. type: Plain text
11010 #: build/C/man3/stdarg.3:48 build/C/man3/syslog.3:49
11011 msgid "B<#include E<lt>stdarg.hE<gt>>"
11014 #. type: Plain text
11015 #: build/C/man3/stdarg.3:50
11016 msgid "B<void va_start(va_list >I<ap>B<, >I<last>B<);>"
11019 #. type: Plain text
11020 #: build/C/man3/stdarg.3:52
11021 msgid "I<type>B< va_arg(va_list >I<ap>B<, >I<type>B<);>"
11024 #. type: Plain text
11025 #: build/C/man3/stdarg.3:54
11026 msgid "B<void va_end(va_list >I<ap>B<);>"
11029 #. type: Plain text
11030 #: build/C/man3/stdarg.3:56
11031 msgid "B<void va_copy(va_list >I<dest>B<, va_list >I<src>B<);>"
11034 #. type: Plain text
11035 #: build/C/man3/stdarg.3:65
11037 "A function may be called with a varying number of arguments of varying "
11038 "types. The include file I<E<lt>stdarg.hE<gt>> declares a type I<va_list> "
11039 "and defines three macros for stepping through a list of arguments whose "
11040 "number and types are not known to the called function."
11043 #. type: Plain text
11044 #: build/C/man3/stdarg.3:73
11046 "The called function must declare an object of type I<va_list> which is used "
11047 "by the macros B<va_start>(), B<va_arg>(), and B<va_end>()."
11051 #: build/C/man3/stdarg.3:73
11056 #. type: Plain text
11057 #: build/C/man3/stdarg.3:83
11059 "The B<va_start>() macro initializes I<ap> for subsequent use by B<va_arg>() "
11060 "and B<va_end>(), and must be called first."
11063 #. type: Plain text
11064 #: build/C/man3/stdarg.3:88
11066 "The argument I<last> is the name of the last argument before the variable "
11067 "argument list, that is, the last argument of which the calling function "
11071 #. type: Plain text
11072 #: build/C/man3/stdarg.3:93
11074 "Because the address of this argument may be used in the B<va_start>() "
11075 "macro, it should not be declared as a register variable, or as a function or "
11080 #: build/C/man3/stdarg.3:93
11085 #. type: Plain text
11086 #: build/C/man3/stdarg.3:115
11088 "The B<va_arg>() macro expands to an expression that has the type and value "
11089 "of the next argument in the call. The argument I<ap> is the I<va_list> "
11090 "I<ap> initialized by B<va_start>(). Each call to B<va_arg>() modifies "
11091 "I<ap> so that the next call returns the next argument. The argument I<type> "
11092 "is a type name specified so that the type of a pointer to an object that has "
11093 "the specified type can be obtained simply by adding a * to I<type>."
11096 #. type: Plain text
11097 #: build/C/man3/stdarg.3:123
11099 "The first use of the B<va_arg>() macro after that of the B<va_start>() "
11100 "macro returns the argument after I<last>. Successive invocations return the "
11101 "values of the remaining arguments."
11104 #. type: Plain text
11105 #: build/C/man3/stdarg.3:128
11107 "If there is no next argument, or if I<type> is not compatible with the type "
11108 "of the actual next argument (as promoted according to the default argument "
11109 "promotions), random errors will occur."
11112 #. type: Plain text
11113 #: build/C/man3/stdarg.3:136
11115 "If I<ap> is passed to a function that uses B<va_arg(>I<ap>B<,>I<type>B<),> "
11116 "then the value of I<ap> is undefined after the return of that function."
11120 #: build/C/man3/stdarg.3:136
11125 #. type: Plain text
11126 #: build/C/man3/stdarg.3:155
11128 "Each invocation of B<va_start>() must be matched by a corresponding "
11129 "invocation of B<va_end>() in the same function. After the call "
11130 "B<va_end(>I<ap>B<)> the variable I<ap> is undefined. Multiple traversals of "
11131 "the list, each bracketed by B<va_start>() and B<va_end>() are possible. "
11132 "B<va_end>() may be a macro or a function."
11136 #: build/C/man3/stdarg.3:155
11141 #. type: Plain text
11142 #: build/C/man3/stdarg.3:172
11144 "The B<va_copy>() macro copies the (previously initialized) variable "
11145 "argument list I<src> to I<dest>. The behavior is as if B<va_start>() were "
11146 "applied to I<dest> with the same I<last> argument, followed by the same "
11147 "number of B<va_arg>() invocations that was used to reach the current state "
11151 #. Proposal from clive@demon.net, 1997-02-28
11152 #. type: Plain text
11153 #: build/C/man3/stdarg.3:179
11155 "An obvious implementation would have a I<va_list> be a pointer to the stack "
11156 "frame of the variadic function. In such a setup (by far the most common) "
11157 "there seems nothing against an assignment"
11160 #. type: Plain text
11161 #: build/C/man3/stdarg.3:183
11163 msgid "va_list aq = ap;\n"
11166 #. type: Plain text
11167 #: build/C/man3/stdarg.3:188
11169 "Unfortunately, there are also systems that make it an array of pointers (of "
11170 "length 1), and there one needs"
11173 #. type: Plain text
11174 #: build/C/man3/stdarg.3:193
11181 #. type: Plain text
11182 #: build/C/man3/stdarg.3:209
11184 "Finally, on systems where arguments are passed in registers, it may be "
11185 "necessary for B<va_start>() to allocate memory, store the arguments there, "
11186 "and also an indication of which argument is next, so that B<va_arg>() can "
11187 "step through the list. Now B<va_end>() can free the allocated memory "
11188 "again. To accommodate this situation, C99 adds a macro B<va_copy>(), so "
11189 "that the above assignment can be replaced by"
11192 #. type: Plain text
11193 #: build/C/man3/stdarg.3:216
11197 "va_copy(aq, ap);\n"
11202 #. type: Plain text
11203 #: build/C/man3/stdarg.3:229
11205 "Each invocation of B<va_copy>() must be matched by a corresponding "
11206 "invocation of B<va_end>() in the same function. Some systems that do not "
11207 "supply B<va_copy>() have B<__va_copy> instead, since that was the name used "
11208 "in the draft proposal."
11211 #. type: Plain text
11212 #: build/C/man3/stdarg.3:238
11214 "The B<va_start>(), B<va_arg>(), B<va_end>(), and B<va_copy>() macros are "
11218 #. type: Plain text
11219 #: build/C/man3/stdarg.3:248
11221 "The B<va_start>(), B<va_arg>(), and B<va_end>() macros conform to C89. C99 "
11222 "defines the B<va_copy>() macro."
11225 #. type: Plain text
11226 #: build/C/man3/stdarg.3:254
11228 "These macros are I<not> compatible with the historic macros they replace. A "
11229 "backward-compatible version can be found in the include file "
11230 "I<E<lt>varargs.hE<gt>>."
11233 #. type: Plain text
11234 #: build/C/man3/stdarg.3:256
11235 msgid "The historic setup is:"
11238 #. type: Plain text
11239 #: build/C/man3/stdarg.3:260
11241 msgid "#include E<lt>varargs.hE<gt>\n"
11244 #. type: Plain text
11245 #: build/C/man3/stdarg.3:266
11255 #. type: Plain text
11256 #: build/C/man3/stdarg.3:275
11262 " x = va_arg(ap, type);\n"
11269 #. type: Plain text
11270 #: build/C/man3/stdarg.3:284
11272 "On some systems, I<va_end> contains a closing \\(aq}\\(aq matching a "
11273 "\\(aq{\\(aq in I<va_start>, so that both macros must occur in the same "
11274 "function, and in a way that allows this."
11277 #. type: Plain text
11278 #: build/C/man3/stdarg.3:300
11280 "Unlike the B<varargs> macros, the B<stdarg> macros do not permit programmers "
11281 "to code a function with no fixed arguments. This problem generates work "
11282 "mainly when converting B<varargs> code to B<stdarg> code, but it also "
11283 "creates difficulties for variadic functions that wish to pass all of their "
11284 "arguments on to a function that takes a I<va_list> argument, such as "
11288 #. type: Plain text
11289 #: build/C/man3/stdarg.3:305
11291 "The function I<foo> takes a string of format characters and prints out the "
11292 "argument associated with each format character based on the type."
11295 #. type: Plain text
11296 #: build/C/man3/stdarg.3:309
11299 "#include E<lt>stdio.hE<gt>\n"
11300 "#include E<lt>stdarg.hE<gt>\n"
11303 #. type: Plain text
11304 #: build/C/man3/stdarg.3:316
11308 "foo(char *fmt, ...)\n"
11315 #. type: Plain text
11316 #: build/C/man3/stdarg.3:337
11319 " va_start(ap, fmt);\n"
11321 " switch (*fmt++) {\n"
11322 " case \\(aqs\\(aq: /* string */\n"
11323 " s = va_arg(ap, char *);\n"
11324 " printf(\"string %s\\en\", s);\n"
11326 " case \\(aqd\\(aq: /* int */\n"
11327 " d = va_arg(ap, int);\n"
11328 " printf(\"int %d\\en\", d);\n"
11330 " case \\(aqc\\(aq: /* char */\n"
11331 " /* need a cast here since va_arg only\n"
11332 " takes fully promoted types */\n"
11333 " c = (char) va_arg(ap, int);\n"
11334 " printf(\"char %c\\en\", c);\n"
11342 #: build/C/man2/syslog.2:31 build/C/man3/syslog.3:36
11348 #: build/C/man2/syslog.2:31
11353 #. type: Plain text
11354 #: build/C/man2/syslog.2:35
11356 "syslog, klogctl - read and/or clear kernel message ring buffer; set "
11360 #. type: Plain text
11361 #: build/C/man2/syslog.2:39
11364 "B<int syslog(int >I<type>B<, char *>I<bufp>B<, int >I<len>B<);>\n"
11365 "B</* No wrapper provided in glibc */>\n"
11368 #. type: Plain text
11369 #: build/C/man2/syslog.2:41
11371 msgid "/* The glibc interface */\n"
11374 #. type: Plain text
11375 #: build/C/man2/syslog.2:43
11377 msgid "B<#include E<lt>sys/klog.hE<gt>>\n"
11380 #. type: Plain text
11381 #: build/C/man2/syslog.2:45
11383 msgid "B<int klogctl(int >I<type>B<, char *>I<bufp>B<, int >I<len>B<);>\n"
11386 #. type: Plain text
11387 #: build/C/man2/syslog.2:57
11389 "If you need the C library function B<syslog>() (which talks to "
11390 "B<syslogd>(8)), then look at B<syslog>(3). The system call of this name is "
11391 "about controlling the kernel I<printk>() buffer, and the glibc wrapper "
11392 "function is called B<klogctl>()."
11396 #: build/C/man2/syslog.2:57
11398 msgid "The kernel log buffer"
11401 #. Under "General setup" ==> "Kernel log buffer size"
11402 #. For 2.6, precisely the option seems to have appeared in 2.5.55.
11403 #. type: Plain text
11404 #: build/C/man2/syslog.2:73
11406 "The kernel has a cyclic buffer of length B<LOG_BUF_LEN> in which messages "
11407 "given as arguments to the kernel function B<printk>() are stored "
11408 "(regardless of their loglevel). In early kernels, B<LOG_BUF_LEN> had the "
11409 "value 4096; from kernel 1.3.54, it was 8192; from kernel 2.1.113 it was "
11410 "16384; since 2.4.23/2.6 the value is a kernel configuration option "
11411 "(B<CONFIG_LOG_BUF_SHIFT>). In recent kernels the size can be queried with "
11412 "command type 10 (see below)."
11416 #: build/C/man2/syslog.2:73
11421 #. type: Plain text
11422 #: build/C/man2/syslog.2:80
11424 "The I<type> argument determines the action taken by this function. The list "
11425 "below specifies the values for I<type>. The symbolic names are defined in "
11426 "the kernel source, but are not exported to user space; you will either need "
11427 "to use the numbers, or define the names yourself."
11431 #: build/C/man2/syslog.2:80
11433 msgid "B<SYSLOG_ACTION_CLOSE> (0)"
11436 #. type: Plain text
11437 #: build/C/man2/syslog.2:84
11438 msgid "Close the log. Currently a NOP."
11442 #: build/C/man2/syslog.2:84
11444 msgid "B<SYSLOG_ACTION_OPEN> (1)"
11447 #. type: Plain text
11448 #: build/C/man2/syslog.2:88
11449 msgid "Open the log. Currently a NOP."
11453 #: build/C/man2/syslog.2:88
11455 msgid "B<SYSLOG_ACTION_READ> (2)"
11458 #. type: Plain text
11459 #: build/C/man2/syslog.2:100
11461 "Read from the log. The call waits until the kernel log buffer is nonempty, "
11462 "and then reads at most I<len> bytes into the buffer pointed to by I<bufp>. "
11463 "The call returns the number of bytes read. Bytes read from the log "
11464 "disappear from the log buffer: the information can be read only once. This "
11465 "is the function executed by the kernel when a user program reads "
11470 #: build/C/man2/syslog.2:100
11472 msgid "B<SYSLOG_ACTION_READ_ALL> (3)"
11475 #. type: Plain text
11476 #: build/C/man2/syslog.2:110
11478 "Read all messages remaining in the ring buffer, placing then in the buffer "
11479 "pointed to by I<bufp>. The call reads the last I<len> bytes from the log "
11480 "buffer (nondestructively), but will not read more than was written into the "
11481 "buffer since the last \"clear ring buffer\" command (see command 5 below)). "
11482 "The call returns the number of bytes read."
11486 #: build/C/man2/syslog.2:110
11488 msgid "B<SYSLOG_ACTION_READ_CLEAR> (4)"
11491 #. type: Plain text
11492 #: build/C/man2/syslog.2:116
11494 "Read and clear all messages remaining in the ring buffer. The call does "
11495 "precisely the same as for a I<type> of 3, but also executes the \"clear ring "
11496 "buffer\" command."
11500 #: build/C/man2/syslog.2:116
11502 msgid "B<SYSLOG_ACTION_CLEAR> (5)"
11505 #. type: Plain text
11506 #: build/C/man2/syslog.2:124
11508 "The call executes just the \"clear ring buffer\" command. The I<bufp> and "
11509 "I<len> arguments are ignored."
11512 #. type: Plain text
11513 #: build/C/man2/syslog.2:135
11515 "This command does not really clear the ring buffer. Rather, it sets a "
11516 "kernel bookkeeping variable that determines the results returned by commands "
11517 "3 (B<SYSLOG_ACTION_READ_ALL>) and 4 (B<SYSLOG_ACTION_READ_CLEAR>). This "
11518 "command has no effect on commands 2 (B<SYSLOG_ACTION_READ>) and 9 "
11519 "(B<SYSLOG_ACTION_SIZE_UNREAD>)."
11523 #: build/C/man2/syslog.2:135
11525 msgid "B<SYSLOG_ACTION_CONSOLE_OFF> (6)"
11528 #. type: Plain text
11529 #: build/C/man2/syslog.2:145
11531 "Disable printk to console. The call sets the console log level to the "
11532 "minimum, so that no messages are printed to the console. The I<bufp> and "
11533 "I<len> arguments are ignored."
11537 #: build/C/man2/syslog.2:145
11539 msgid "B<SYSLOG_ACTION_CONSOLE_ON> (7)"
11542 #. type: Plain text
11543 #: build/C/man2/syslog.2:154
11545 "The call sets the console log level to the default, so that messages are "
11546 "printed to the console. The I<bufp> and I<len> arguments are ignored."
11550 #: build/C/man2/syslog.2:154
11552 msgid "B<SYSLOG_ACTION_CONSOLE_LEVEL> (8)"
11555 #. type: Plain text
11556 #: build/C/man2/syslog.2:165
11558 "The call sets the console log level to the value given in I<len>, which must "
11559 "be an integer between 1 and 8 (inclusive). See the B<loglevel> section for "
11560 "details. The I<bufp> argument is ignored."
11564 #: build/C/man2/syslog.2:165
11566 msgid "B<SYSLOG_ACTION_SIZE_UNREAD> (9) (since Linux 2.4.10)"
11569 #. type: Plain text
11570 #: build/C/man2/syslog.2:176
11572 "The call returns the number of bytes currently available to be read from the "
11573 "kernel log buffer via command 2 (B<SYSLOG_ACTION_READ>). The I<bufp> and "
11574 "I<len> arguments are ignored."
11578 #: build/C/man2/syslog.2:176
11580 msgid "B<SYSLOG_ACTION_SIZE_BUFFER> (10) (since Linux 2.6.6)"
11583 #. type: Plain text
11584 #: build/C/man2/syslog.2:184
11586 "This command returns the total size of the kernel log buffer. The I<bufp> "
11587 "and I<len> arguments are ignored."
11590 #. type: Plain text
11591 #: build/C/man2/syslog.2:201
11593 "All commands except 3 and 10 require privilege. In Linux kernels before "
11594 "2.6.37, command types 3 and 10 are allowed to unprivileged processes; since "
11595 "Linux 2.6.37, these commands are allowed to unprivileged processes only if "
11596 "I</proc/sys/kernel/dmesg_restrict> has the value 0. Before Linux 2.6.37, "
11597 "\"privileged\" means that the caller has the B<CAP_SYS_ADMIN> capability. "
11598 "Since Linux 2.6.37, \"privileged\" means that the caller has either the "
11599 "B<CAP_SYS_ADMIN> capability (now deprecated for this purpose) or the (new) "
11600 "B<CAP_SYSLOG> capability."
11604 #: build/C/man2/syslog.2:201
11606 msgid "The loglevel"
11609 #. type: Plain text
11610 #: build/C/man2/syslog.2:223
11612 "The kernel routine B<printk>() will only print a message on the console, if "
11613 "it has a loglevel less than the value of the variable I<console_loglevel>. "
11614 "This variable initially has the value B<DEFAULT_CONSOLE_LOGLEVEL> (7), but "
11615 "is set to 10 if the kernel command line contains the word \"debug\", and to "
11616 "15 in case of a kernel fault (the 10 and 15 are just silly, and equivalent "
11617 "to 8). This variable is set (to a value in the range 1-8) by a B<syslog>() "
11618 "call with a I<type> of 8. Calls to B<syslog>() with I<type> equal to 6 or "
11619 "7 set the variable to 1 (kernel panics only) or 7 (all except debugging "
11620 "messages), respectively."
11623 #. type: Plain text
11624 #: build/C/man2/syslog.2:233
11626 "Every text line in a message has its own loglevel. This level is "
11627 "I<DEFAULT_MESSAGE_LOGLEVEL - 1> (6) unless the line starts with E<lt>dE<gt> "
11628 "where I<d> is a digit in the range 1-7, in which case the level is I<d>. "
11629 "The conventional meaning of the loglevel is defined in "
11630 "I<E<lt>linux/kernel.hE<gt>> as follows:"
11633 #. type: Plain text
11634 #: build/C/man2/syslog.2:243
11637 "#define KERN_EMERG \"E<lt>0E<gt>\" /* system is unusable "
11639 "#define KERN_ALERT \"E<lt>1E<gt>\" /* action must be taken immediately "
11641 "#define KERN_CRIT \"E<lt>2E<gt>\" /* critical conditions "
11643 "#define KERN_ERR \"E<lt>3E<gt>\" /* error conditions "
11645 "#define KERN_WARNING \"E<lt>4E<gt>\" /* warning conditions "
11647 "#define KERN_NOTICE \"E<lt>5E<gt>\" /* normal but significant condition "
11649 "#define KERN_INFO \"E<lt>6E<gt>\" /* informational "
11651 "#define KERN_DEBUG \"E<lt>7E<gt>\" /* debug-level messages "
11655 #. type: Plain text
11656 #: build/C/man2/syslog.2:257
11658 "For I<type> equal to 2, 3, or 4, a successful call to B<syslog>() returns "
11659 "the number of bytes read. For I<type> 9, B<syslog>() returns the number of "
11660 "bytes currently available to be read on the kernel log buffer. For I<type> "
11661 "10, B<syslog>() returns the total size of the kernel log buffer. For other "
11662 "values of I<type>, 0 is returned on success."
11665 #. type: Plain text
11666 #: build/C/man2/syslog.2:260
11667 msgid "In case of error, -1 is returned, and I<errno> is set to indicate the error."
11670 #. type: Plain text
11671 #: build/C/man2/syslog.2:278
11673 "Bad arguments (e.g., bad I<type>; or for I<type> 2, 3, or 4, I<buf> is NULL, "
11674 "or I<len> is less than zero; or for I<type> 8, the I<level> is outside the "
11678 #. type: Plain text
11679 #: build/C/man2/syslog.2:285
11681 "This B<syslog>() system call is not available, because the kernel was "
11682 "compiled with the B<CONFIG_PRINTK> kernel-configuration option disabled."
11685 #. type: Plain text
11686 #: build/C/man2/syslog.2:294
11688 "An attempt was made to change console_loglevel or clear the kernel message "
11689 "ring buffer by a process without sufficient privilege (more precisely: "
11690 "without the B<CAP_SYS_ADMIN> or B<CAP_SYSLOG> capability)."
11694 #: build/C/man2/syslog.2:294
11696 msgid "B<ERESTARTSYS>"
11699 #. type: Plain text
11700 #: build/C/man2/syslog.2:298
11702 "System call was interrupted by a signal; nothing was read. (This can be "
11703 "seen only during a trace.)"
11706 #. type: Plain text
11707 #: build/C/man2/syslog.2:301
11709 "This system call is Linux-specific and should not be used in programs "
11710 "intended to be portable."
11713 #. In libc4 and libc5 the number of this call was defined by
11715 #. In glibc 2.0 the syscall is baptized
11717 #. type: Plain text
11718 #: build/C/man2/syslog.2:309
11720 "From the very start people noted that it is unfortunate that a system call "
11721 "and a library routine of the same name are entirely different animals."
11724 #. type: Plain text
11725 #: build/C/man2/syslog.2:312
11726 msgid "B<syslog>(3), B<capabilities>(7)"
11730 #: build/C/man3/syslog.3:36
11735 #. type: Plain text
11736 #: build/C/man3/syslog.3:39
11737 msgid "closelog, openlog, syslog, vsyslog - send messages to the system logger"
11740 #. type: Plain text
11741 #: build/C/man3/syslog.3:41
11742 msgid "B<#include E<lt>syslog.hE<gt>>"
11745 #. type: Plain text
11746 #: build/C/man3/syslog.3:43
11748 "B<void openlog(const char *>I<ident>B<, int >I<option>B<, int "
11749 ">I<facility>B<);>"
11752 #. type: Plain text
11753 #: build/C/man3/syslog.3:45
11754 msgid "B<void syslog(int >I<priority>B<, const char *>I<format>B<, ...);>"
11757 #. type: Plain text
11758 #: build/C/man3/syslog.3:47
11759 msgid "B<void closelog(void);>"
11762 #. type: Plain text
11763 #: build/C/man3/syslog.3:51
11765 "B<void vsyslog(int >I<priority>B<, const char *>I<format>B<, va_list "
11769 #. type: Plain text
11770 #: build/C/man3/syslog.3:59
11771 msgid "B<vsyslog>(): _BSD_SOURCE"
11774 #. type: Plain text
11775 #: build/C/man3/syslog.3:65
11777 "B<closelog>() closes the descriptor being used to write to the system "
11778 "logger. The use of B<closelog>() is optional."
11781 #. type: Plain text
11782 #: build/C/man3/syslog.3:77
11784 "B<openlog>() opens a connection to the system logger for a program. The "
11785 "string pointed to by I<ident> is prepended to every message, and is "
11786 "typically set to the program name. If I<ident> is NULL, the program name is "
11787 "used. (POSIX.1-2008 does not specify the behavior when I<ident> is NULL.)"
11790 #. type: Plain text
11791 #: build/C/man3/syslog.3:101
11793 "The I<option> argument specifies flags which control the operation of "
11794 "B<openlog>() and subsequent calls to B<syslog>(). The I<facility> argument "
11795 "establishes a default to be used if none is specified in subsequent calls to "
11796 "B<syslog>(). Values for I<option> and I<facility> are given below. The use "
11797 "of B<openlog>() is optional; it will automatically be called by B<syslog>() "
11798 "if necessary, in which case I<ident> will default to NULL."
11801 #. type: Plain text
11802 #: build/C/man3/syslog.3:125
11804 "B<syslog>() generates a log message, which will be distributed by "
11805 "B<syslogd>(8). The I<priority> argument is formed by ORing the I<facility> "
11806 "and the I<level> values (explained below). The remaining arguments are a "
11807 "I<format>, as in B<printf>(3) and any arguments required by the I<format>, "
11808 "except that the two character sequence B<%m> will be replaced by the error "
11809 "message string I<strerror>(I<errno>). A trailing newline may be added if "
11813 #. type: Plain text
11814 #: build/C/man3/syslog.3:134
11816 "The function B<vsyslog>() performs the same task as B<syslog>() with the "
11817 "difference that it takes a set of arguments which have been obtained using "
11818 "the B<stdarg>(3) variable argument list macros."
11821 #. type: Plain text
11822 #: build/C/man3/syslog.3:137
11824 "The subsections below list the parameters used to set the values of "
11825 "I<option>,I< facility>, and I<priority>."
11829 #: build/C/man3/syslog.3:137
11834 #. type: Plain text
11835 #: build/C/man3/syslog.3:143
11836 msgid "The I<option> argument to B<openlog>() is an OR of any of these:"
11840 #: build/C/man3/syslog.3:143
11842 msgid "B<LOG_CONS>"
11845 #. type: Plain text
11846 #: build/C/man3/syslog.3:147
11848 "Write directly to system console if there is an error while sending to "
11853 #: build/C/man3/syslog.3:147
11855 msgid "B<LOG_NDELAY>"
11858 #. type: Plain text
11859 #: build/C/man3/syslog.3:151
11861 "Open the connection immediately (normally, the connection is opened when the "
11862 "first message is logged)."
11866 #: build/C/man3/syslog.3:151
11868 msgid "B<LOG_NOWAIT>"
11871 #. type: Plain text
11872 #: build/C/man3/syslog.3:157
11874 "Don't wait for child processes that may have been created while logging the "
11875 "message. (The GNU C library does not create a child process, so this option "
11876 "has no effect on Linux.)"
11880 #: build/C/man3/syslog.3:157
11882 msgid "B<LOG_ODELAY>"
11885 #. type: Plain text
11886 #: build/C/man3/syslog.3:165
11888 "The converse of B<LOG_NDELAY>; opening of the connection is delayed until "
11889 "B<syslog>() is called. (This is the default, and need not be specified.)"
11893 #: build/C/man3/syslog.3:165
11895 msgid "B<LOG_PERROR>"
11898 #. type: Plain text
11899 #: build/C/man3/syslog.3:169
11900 msgid "(Not in POSIX.1-2001 or POSIX.1-2008.) Print to I<stderr> as well."
11904 #: build/C/man3/syslog.3:169
11909 #. type: Plain text
11910 #: build/C/man3/syslog.3:172
11911 msgid "Include PID with each message."
11915 #: build/C/man3/syslog.3:172
11920 #. type: Plain text
11921 #: build/C/man3/syslog.3:178
11923 "The I<facility> argument is used to specify what type of program is logging "
11924 "the message. This lets the configuration file specify that messages from "
11925 "different facilities will be handled differently."
11929 #: build/C/man3/syslog.3:178
11931 msgid "B<LOG_AUTH>"
11934 #. type: Plain text
11935 #: build/C/man3/syslog.3:181
11936 msgid "security/authorization messages"
11940 #: build/C/man3/syslog.3:181
11942 msgid "B<LOG_AUTHPRIV>"
11945 #. type: Plain text
11946 #: build/C/man3/syslog.3:184
11947 msgid "security/authorization messages (private)"
11951 #: build/C/man3/syslog.3:184
11953 msgid "B<LOG_CRON>"
11956 #. type: Plain text
11957 #: build/C/man3/syslog.3:188
11958 msgid "clock daemon (B<cron> and B<at>)"
11962 #: build/C/man3/syslog.3:188
11964 msgid "B<LOG_DAEMON>"
11967 #. type: Plain text
11968 #: build/C/man3/syslog.3:191
11969 msgid "system daemons without separate facility value"
11973 #: build/C/man3/syslog.3:191
11978 #. type: Plain text
11979 #: build/C/man3/syslog.3:194
11984 #: build/C/man3/syslog.3:194
11986 msgid "B<LOG_KERN>"
11989 #. LOG_KERN has the value 0; if used as a facility, zero translates to:
11990 #. "use the default facility".
11991 #. type: Plain text
11992 #: build/C/man3/syslog.3:199
11993 msgid "kernel messages (these can't be generated from user processes)"
11997 #: build/C/man3/syslog.3:199
11999 msgid "B<LOG_LOCAL0> through B<LOG_LOCAL7>"
12002 #. type: Plain text
12003 #: build/C/man3/syslog.3:202
12004 msgid "reserved for local use"
12008 #: build/C/man3/syslog.3:202
12013 #. type: Plain text
12014 #: build/C/man3/syslog.3:205
12015 msgid "line printer subsystem"
12019 #: build/C/man3/syslog.3:205
12021 msgid "B<LOG_MAIL>"
12024 #. type: Plain text
12025 #: build/C/man3/syslog.3:208
12026 msgid "mail subsystem"
12030 #: build/C/man3/syslog.3:208
12032 msgid "B<LOG_NEWS>"
12035 #. type: Plain text
12036 #: build/C/man3/syslog.3:211
12037 msgid "USENET news subsystem"
12041 #: build/C/man3/syslog.3:211
12043 msgid "B<LOG_SYSLOG>"
12046 #. type: Plain text
12047 #: build/C/man3/syslog.3:215
12048 msgid "messages generated internally by B<syslogd>(8)"
12052 #: build/C/man3/syslog.3:215
12054 msgid "B<LOG_USER> (default)"
12057 #. type: Plain text
12058 #: build/C/man3/syslog.3:218
12059 msgid "generic user-level messages"
12063 #: build/C/man3/syslog.3:218
12065 msgid "B<LOG_UUCP>"
12068 #. type: Plain text
12069 #: build/C/man3/syslog.3:221
12070 msgid "UUCP subsystem"
12074 #: build/C/man3/syslog.3:221
12079 #. type: Plain text
12080 #: build/C/man3/syslog.3:224
12082 "This determines the importance of the message. The levels are, in order of "
12083 "decreasing importance:"
12087 #: build/C/man3/syslog.3:224
12089 msgid "B<LOG_EMERG>"
12092 #. type: Plain text
12093 #: build/C/man3/syslog.3:227
12094 msgid "system is unusable"
12098 #: build/C/man3/syslog.3:227
12100 msgid "B<LOG_ALERT>"
12103 #. type: Plain text
12104 #: build/C/man3/syslog.3:230
12105 msgid "action must be taken immediately"
12109 #: build/C/man3/syslog.3:230
12111 msgid "B<LOG_CRIT>"
12114 #. type: Plain text
12115 #: build/C/man3/syslog.3:233
12116 msgid "critical conditions"
12120 #: build/C/man3/syslog.3:233
12125 #. type: Plain text
12126 #: build/C/man3/syslog.3:236
12127 msgid "error conditions"
12131 #: build/C/man3/syslog.3:236
12133 msgid "B<LOG_WARNING>"
12136 #. type: Plain text
12137 #: build/C/man3/syslog.3:239
12138 msgid "warning conditions"
12142 #: build/C/man3/syslog.3:239
12144 msgid "B<LOG_NOTICE>"
12147 #. type: Plain text
12148 #: build/C/man3/syslog.3:242
12149 msgid "normal, but significant, condition"
12153 #: build/C/man3/syslog.3:242
12155 msgid "B<LOG_INFO>"
12158 #. type: Plain text
12159 #: build/C/man3/syslog.3:245
12160 msgid "informational message"
12164 #: build/C/man3/syslog.3:245
12166 msgid "B<LOG_DEBUG>"
12169 #. type: Plain text
12170 #: build/C/man3/syslog.3:248
12171 msgid "debug-level message"
12174 #. type: Plain text
12175 #: build/C/man3/syslog.3:252
12177 "The function B<setlogmask>(3) can be used to restrict logging to specified "
12184 #. function call appeared in 4.2BSD.
12185 #. 4.3BSD documents
12188 #. .BR closelog (),
12190 #. .BR setlogmask ().
12191 #. 4.3BSD-Reno also documents
12193 #. Of course early v* functions used the
12195 #. mechanism, which is not compatible with
12196 #. .IR <stdarg.h> .
12197 #. type: Plain text
12198 #: build/C/man3/syslog.3:296
12200 "The functions B<openlog>(), B<closelog>(), and B<syslog>() (but not "
12201 "B<vsyslog>()) are specified in SUSv2, POSIX.1-2001, and POSIX.1-2008. "
12202 "POSIX.1-2001 specifies only the B<LOG_USER> and B<LOG_LOCAL*> values for "
12203 "I<facility>. However, with the exception of B<LOG_AUTHPRIV> and B<LOG_FTP>, "
12204 "the other I<facility> values appear on most UNIX systems. The B<LOG_PERROR> "
12205 "value for I<option> is not specified by POSIX.1-2001 or POSIX.1-2008, but is "
12206 "available in most versions of UNIX."
12209 #. type: Plain text
12210 #: build/C/man3/syslog.3:308
12212 "The argument I<ident> in the call of B<openlog>() is probably stored "
12213 "as-is. Thus, if the string it points to is changed, B<syslog>() may start "
12214 "prepending the changed string, and if the string it points to ceases to "
12215 "exist, the results are undefined. Most portable is to use a string "
12219 #. type: Plain text
12220 #: build/C/man3/syslog.3:311
12222 "Never pass a string with user-supplied data as a format, use the following "
12226 #. type: Plain text
12227 #: build/C/man3/syslog.3:314
12229 msgid " syslog(priority, \"%s\", string);\n"
12232 #. type: Plain text
12233 #: build/C/man3/syslog.3:320
12234 msgid "B<logger>(1), B<setlogmask>(3), B<syslog.conf>(5), B<syslogd>(8)"
12238 #: build/C/man4/ttyS.4:26
12244 #: build/C/man4/ttyS.4:26
12249 #. type: Plain text
12250 #: build/C/man4/ttyS.4:29
12251 msgid "ttyS - serial terminal lines"
12254 #. type: Plain text
12255 #: build/C/man4/ttyS.4:32
12256 msgid "B<ttyS[0-3]> are character devices for the serial terminal lines."
12259 #. type: Plain text
12260 #: build/C/man4/ttyS.4:37
12261 msgid "mknod -m 660 /dev/ttyS0 c 4 64 # base address 0x3f8"
12264 #. type: Plain text
12265 #: build/C/man4/ttyS.4:39
12266 msgid "mknod -m 660 /dev/ttyS1 c 4 65 # base address 0x2f8"
12269 #. type: Plain text
12270 #: build/C/man4/ttyS.4:41
12271 msgid "mknod -m 660 /dev/ttyS2 c 4 66 # base address 0x3e8"
12274 #. type: Plain text
12275 #: build/C/man4/ttyS.4:43
12276 msgid "mknod -m 660 /dev/ttyS3 c 4 67 # base address 0x2e8"
12279 #. type: Plain text
12280 #: build/C/man4/ttyS.4:45
12281 msgid "chown root:tty /dev/ttyS[0-3]"
12284 #. type: Plain text
12285 #: build/C/man4/ttyS.4:48
12286 msgid "/dev/ttyS[0-3]"
12289 #. type: Plain text
12290 #: build/C/man4/ttyS.4:55
12292 "B<chown>(1), B<mknod>(1), B<tty>(4), B<agetty>(8), B<mingetty>(8), "
12297 #: build/C/man7/uri.7:48
12303 #: build/C/man7/uri.7:48
12308 #. type: Plain text
12309 #: build/C/man7/uri.7:51
12310 msgid "uri, url, urn - uniform resource identifier (URI), including a URL or URN"
12313 #. type: Plain text
12314 #: build/C/man7/uri.7:55
12316 msgid "URI = [ absoluteURI | relativeURI ] [ \"#\" fragment ]\n"
12319 #. type: Plain text
12320 #: build/C/man7/uri.7:57
12322 msgid "absoluteURI = scheme \":\" ( hierarchical_part | opaque_part )\n"
12325 #. type: Plain text
12326 #: build/C/man7/uri.7:59
12328 msgid "relativeURI = ( net_path | absolute_path | relative_path ) [ \"?\" query ]\n"
12331 #. type: Plain text
12332 #: build/C/man7/uri.7:62
12335 "scheme = \"http\" | \"ftp\" | \"gopher\" | \"mailto\" | \"news\" | "
12337 " \"file\" | \"man\" | \"info\" | \"whatis\" | \"ldap\" | \"wais\" | "
12341 #. type: Plain text
12342 #: build/C/man7/uri.7:64
12344 msgid "hierarchical_part = ( net_path | absolute_path ) [ \"?\" query ]\n"
12347 #. type: Plain text
12348 #: build/C/man7/uri.7:66
12350 msgid "net_path = \"//\" authority [ absolute_path ]\n"
12353 #. type: Plain text
12354 #: build/C/man7/uri.7:68
12356 msgid "absolute_path = \"/\" path_segments\n"
12359 #. type: Plain text
12360 #: build/C/man7/uri.7:70
12362 msgid "relative_path = relative_segment [ absolute_path ]\n"
12365 #. type: Plain text
12366 #: build/C/man7/uri.7:82
12368 "A Uniform Resource Identifier (URI) is a short string of characters "
12369 "identifying an abstract or physical resource (for example, a web page). A "
12370 "Uniform Resource Locator (URL) is a URI that identifies a resource through "
12371 "its primary access mechanism (e.g., its network \"location\"), rather than "
12372 "by name or some other attribute of that resource. A Uniform Resource Name "
12373 "(URN) is a URI that must remain globally unique and persistent even when the "
12374 "resource ceases to exist or becomes unavailable."
12377 #. type: Plain text
12378 #: build/C/man7/uri.7:89
12380 "URIs are the standard way to name hypertext link destinations for tools such "
12381 "as web browsers. The string \"http://www.kernelnotes.org\" is a URL (and "
12382 "thus it is also a URI). Many people use the term URL loosely as a synonym "
12383 "for URI (though technically URLs are a subset of URIs)."
12386 #. type: Plain text
12387 #: build/C/man7/uri.7:105
12389 "URIs can be absolute or relative. An absolute identifier refers to a "
12390 "resource independent of context, while a relative identifier refers to a "
12391 "resource by describing the difference from the current context. Within a "
12392 "relative path reference, the complete path segments \".\" and \"..\" have "
12393 "special meanings: \"the current hierarchy level\" and \"the level above this "
12394 "hierarchy level\", respectively, just like they do in UNIX-like systems. A "
12395 "path segment which contains a colon character can't be used as the first "
12396 "segment of a relative URI path (e.g., \"this:that\"), because it would be "
12397 "mistaken for a scheme name; precede such segments with ./ (e.g., "
12398 "\"./this:that\"). Note that descendants of MS-DOS (e.g., Microsoft Windows) "
12399 "replace devicename colons with the vertical bar (\"|\") in URIs, so \"C:\" "
12403 #. type: Plain text
12404 #: build/C/man7/uri.7:109
12406 "A fragment identifier, if included, refers to a particular named portion "
12407 "(fragment) of a resource; text after a \\(aq#\\(aq identifies the fragment. "
12408 "A URI beginning with \\(aq#\\(aq refers to that fragment in the current "
12412 #. type: Plain text
12413 #: build/C/man7/uri.7:117
12415 "There are many different URI schemes, each with specific additional rules "
12416 "and meanings, but they are intentionally made to be as similar as possible. "
12417 "For example, many URL schemes permit the authority to be the following "
12418 "format, called here an I<ip_server> (square brackets show what's optional):"
12421 #. type: Plain text
12422 #: build/C/man7/uri.7:119
12423 msgid "I<ip_server = >[I<user> [ : I<password> ] @ ] I<host> [ : I<port>]"
12426 #. type: Plain text
12427 #: build/C/man7/uri.7:135
12429 "This format allows you to optionally insert a username, a user plus "
12430 "password, and/or a port number. The I<host> is the name of the host "
12431 "computer, either its name as determined by DNS or an IP address (numbers "
12432 "separated by periods). Thus the URI "
12433 "E<lt>http://fred:fredpassword@xyz.com:8080/E<gt> logs into a web server on "
12434 "host xyz.com as fred (using fredpassword) using port 8080. Avoid including "
12435 "a password in a URI if possible because of the many security risks of having "
12436 "a password written down. If the URL supplies a username but no password, "
12437 "and the remote server requests a password, the program interpreting the URL "
12438 "should request one from the user."
12441 #. type: Plain text
12442 #: build/C/man7/uri.7:140
12444 "Here are some of the most common schemes in use on UNIX-like systems that "
12445 "are understood by many tools. Note that many tools using URIs also have "
12446 "internal schemes or specialized schemes; see those tools' documentation for "
12447 "information on those schemes."
12450 #. type: Plain text
12451 #: build/C/man7/uri.7:142
12452 msgid "B<http - Web (HTTP) server>"
12455 #. type: Plain text
12456 #: build/C/man7/uri.7:144
12457 msgid "http://I<ip_server>/I<path>"
12460 #. type: Plain text
12461 #: build/C/man7/uri.7:146
12462 msgid "http://I<ip_server>/I<path>?I<query>"
12465 #. type: Plain text
12466 #: build/C/man7/uri.7:154
12468 "This is a URL accessing a web (HTTP) server. The default port is 80. If "
12469 "the path refers to a directory, the web server will choose what to return; "
12470 "usually if there is a file named \"index.html\" or \"index.htm\" its content "
12471 "is returned, otherwise, a list of the files in the current directory (with "
12472 "appropriate links) is generated and returned. An example is "
12473 "E<lt>http://lwn.netE<gt>."
12476 #. type: Plain text
12477 #: build/C/man7/uri.7:177
12479 "A query can be given in the archaic \"isindex\" format, consisting of a word "
12480 "or phrase and not including an equal sign (=). A query can also be in the "
12481 "longer \"GET\" format, which has one or more query entries of the form "
12482 "I<key>=I<value> separated by the ampersand character (&). Note that I<key> "
12483 "can be repeated more than once, though it's up to the web server and its "
12484 "application programs to determine if there's any meaning to that. There is "
12485 "an unfortunate interaction with HTML/XML/SGML and the GET query format; when "
12486 "such URIs with more than one key are embedded in SGML/XML documents "
12487 "(including HTML), the ampersand (&) has to be rewritten as &. Note that "
12488 "not all queries use this format; larger forms may be too long to store as a "
12489 "URI, so they use a different interaction mechanism (called POST) which does "
12490 "not include the data in the URI. See the Common Gateway Interface "
12491 "specification at E<.UR http://www.w3.org\\:/CGI> E<.UE> for more "
12495 #. type: Plain text
12496 #: build/C/man7/uri.7:179
12497 msgid "B<ftp - File Transfer Protocol (FTP)>"
12500 #. type: Plain text
12501 #: build/C/man7/uri.7:181
12502 msgid "ftp://I<ip_server>/I<path>"
12505 #. type: Plain text
12506 #: build/C/man7/uri.7:189
12508 "This is a URL accessing a file through the file transfer protocol (FTP). "
12509 "The default port (for control) is 21. If no username is included, the "
12510 "username \"anonymous\" is supplied, and in that case many clients provide as "
12511 "the password the requestor's Internet email address. An example is "
12512 "E<lt>ftp://ftp.is.co.za/rfc/rfc1808.txtE<gt>."
12515 #. type: Plain text
12516 #: build/C/man7/uri.7:191
12517 msgid "B<gopher - Gopher server>"
12520 #. type: Plain text
12521 #: build/C/man7/uri.7:193
12522 msgid "gopher://I<ip_server>/I<gophertype selector>"
12525 #. type: Plain text
12526 #: build/C/man7/uri.7:195
12527 msgid "gopher://I<ip_server>/I<gophertype selector>%09I<search>"
12530 #. type: Plain text
12531 #: build/C/man7/uri.7:197
12532 msgid "gopher://I<ip_server>/I<gophertype selector>%09I<search>%09I<gopher+_string>"
12535 #. type: Plain text
12536 #: build/C/man7/uri.7:207
12538 "The default gopher port is 70. I<gophertype> is a single-character field to "
12539 "denote the Gopher type of the resource to which the URL refers. The entire "
12540 "path may also be empty, in which case the delimiting \"/\" is also optional "
12541 "and the gophertype defaults to \"1\"."
12544 #. type: Plain text
12545 #: build/C/man7/uri.7:214
12547 "I<selector> is the Gopher selector string. In the Gopher protocol, Gopher "
12548 "selector strings are a sequence of octets which may contain any octets "
12549 "except 09 hexadecimal (US-ASCII HT or tab), 0A hexadecimal (US-ASCII "
12550 "character LF), and 0D (US-ASCII character CR)."
12553 #. type: Plain text
12554 #: build/C/man7/uri.7:216
12555 msgid "B<mailto - Email address>"
12558 #. type: Plain text
12559 #: build/C/man7/uri.7:218
12560 msgid "mailto:I<email-address>"
12563 #. type: Plain text
12564 #: build/C/man7/uri.7:226
12566 "This is an email address, usually of the form I<name>@I<hostname>. See "
12567 "B<mailaddr>(7) for more information on the correct format of an email "
12568 "address. Note that any % character must be rewritten as %25. An example is "
12569 "E<lt>mailto:dwheeler@dwheeler.comE<gt>."
12572 #. type: Plain text
12573 #: build/C/man7/uri.7:228
12574 msgid "B<news - Newsgroup or News message>"
12577 #. type: Plain text
12578 #: build/C/man7/uri.7:230
12579 msgid "news:I<newsgroup-name>"
12582 #. type: Plain text
12583 #: build/C/man7/uri.7:232
12584 msgid "news:I<message-id>"
12587 #. type: Plain text
12588 #: build/C/man7/uri.7:240
12590 "A I<newsgroup-name> is a period-delimited hierarchical name, such as "
12591 "\"comp.infosystems.www.misc\". If E<lt>newsgroup-nameE<gt> is \"*\" (as in "
12592 "E<lt>news:*E<gt>), it is used to refer to \"all available news groups\". An "
12593 "example is E<lt>news:comp.lang.adaE<gt>."
12596 #. type: Plain text
12597 #: build/C/man7/uri.7:252
12599 "A I<message-id> corresponds to the Message-ID of E<.UR "
12600 "http://www.ietf.org\\:/rfc\\:/rfc1036.txt> IETF RFC\\ 1036, E<.UE> without "
12601 "the enclosing \"E<lt>\" and \"E<gt>\"; it takes the form "
12602 "I<unique>@I<full_domain_name>. A message identifier may be distinguished "
12603 "from a news group name by the presence of the \"@\" character."
12606 #. type: Plain text
12607 #: build/C/man7/uri.7:254
12608 msgid "B<telnet - Telnet login>"
12611 #. type: Plain text
12612 #: build/C/man7/uri.7:256
12613 msgid "telnet://I<ip_server>/"
12616 #. type: Plain text
12617 #: build/C/man7/uri.7:262
12619 "The Telnet URL scheme is used to designate interactive text services that "
12620 "may be accessed by the Telnet protocol. The final \"/\" character may be "
12621 "omitted. The default port is 23. An example is "
12622 "E<lt>telnet://melvyl.ucop.edu/E<gt>."
12625 #. type: Plain text
12626 #: build/C/man7/uri.7:264
12627 msgid "B<file - Normal file>"
12630 #. type: Plain text
12631 #: build/C/man7/uri.7:266
12632 msgid "file://I<ip_server>/I<path_segments>"
12635 #. type: Plain text
12636 #: build/C/man7/uri.7:268
12637 msgid "file:I<path_segments>"
12640 #. type: Plain text
12641 #: build/C/man7/uri.7:285
12643 "This represents a file or directory accessible locally. As a special case, "
12644 "I<ip_server> can be the string \"localhost\" or the empty string; this is "
12645 "interpreted as \"the machine from which the URL is being interpreted\". If "
12646 "the path is to a directory, the viewer should display the directory's "
12647 "contents with links to each containee; not all viewers currently do this. "
12648 "KDE supports generated files through the URL E<lt>file:/cgi-binE<gt>. If "
12649 "the given file isn't found, browser writers may want to try to expand the "
12650 "filename via filename globbing (see B<glob>(7) and B<glob>(3))."
12653 #. type: Plain text
12654 #: build/C/man7/uri.7:299
12656 "The second format (e.g., E<lt>file:/etc/passwdE<gt>) is a correct format "
12657 "for referring to a local file. However, older standards did not permit this "
12658 "format, and some programs don't recognize this as a URI. A more portable "
12659 "syntax is to use an empty string as the server name, for example, "
12660 "E<lt>file:///etc/passwdE<gt>; this form does the same thing and is easily "
12661 "recognized by pattern matchers and older programs as a URI. Note that if "
12662 "you really mean to say \"start from the current location,\" don't specify "
12663 "the scheme at all; use a relative address like E<lt>../test.txtE<gt>, which "
12664 "has the side-effect of being scheme-independent. An example of this scheme "
12665 "is E<lt>file:///etc/passwdE<gt>."
12668 #. type: Plain text
12669 #: build/C/man7/uri.7:301
12670 msgid "B<man - Man page documentation>"
12673 #. type: Plain text
12674 #: build/C/man7/uri.7:303
12675 msgid "man:I<command-name>"
12678 #. type: Plain text
12679 #: build/C/man7/uri.7:305
12680 msgid "man:I<command-name>(I<section>)"
12683 #. type: Plain text
12684 #: build/C/man7/uri.7:314
12686 "This refers to local online manual (man) reference pages. The command name "
12687 "can optionally be followed by a parenthesis and section number; see "
12688 "B<man>(7) for more information on the meaning of the section numbers. This "
12689 "URI scheme is unique to UNIX-like systems (such as Linux) and is not "
12690 "currently registered by the IETF. An example is E<lt>man:ls(1)E<gt>."
12693 #. type: Plain text
12694 #: build/C/man7/uri.7:316
12695 msgid "B<info - Info page documentation>"
12698 #. type: Plain text
12699 #: build/C/man7/uri.7:318
12700 msgid "info:I<virtual-filename>"
12703 #. type: Plain text
12704 #: build/C/man7/uri.7:320
12705 msgid "info:I<virtual-filename>#I<nodename>"
12708 #. type: Plain text
12709 #: build/C/man7/uri.7:322
12710 msgid "info:(I<virtual-filename>)"
12713 #. type: Plain text
12714 #: build/C/man7/uri.7:324
12715 msgid "info:(I<virtual-filename>)I<nodename>"
12718 #. type: Plain text
12719 #: build/C/man7/uri.7:343
12721 "This scheme refers to online info reference pages (generated from texinfo "
12722 "files), a documentation format used by programs such as the GNU tools. This "
12723 "URI scheme is unique to UNIX-like systems (such as Linux) and is not "
12724 "currently registered by the IETF. As of this writing, GNOME and KDE differ "
12725 "in their URI syntax and do not accept the other's syntax. The first two "
12726 "formats are the GNOME format; in nodenames all spaces are written as "
12727 "underscores. The second two formats are the KDE format; spaces in nodenames "
12728 "must be written as spaces, even though this is forbidden by the URI "
12729 "standards. It's hoped that in the future most tools will understand all of "
12730 "these formats and will always accept underscores for spaces in nodenames. "
12731 "In both GNOME and KDE, if the form without the nodename is used the nodename "
12732 "is assumed to be \"Top\". Examples of the GNOME format are "
12733 "E<lt>info:gccE<gt> and E<lt>info:gcc#G++_and_GCCE<gt>. Examples of the KDE "
12734 "format are E<lt>info:(gcc)E<gt> and E<lt>info:(gcc)G++ and GCCE<gt>."
12737 #. type: Plain text
12738 #: build/C/man7/uri.7:345
12739 msgid "B<whatis - Documentation search>"
12742 #. type: Plain text
12743 #: build/C/man7/uri.7:347
12744 msgid "whatis:I<string>"
12747 #. type: Plain text
12748 #: build/C/man7/uri.7:355
12750 "This scheme searches the database of short (one-line) descriptions of "
12751 "commands and returns a list of descriptions containing that string. Only "
12752 "complete word matches are returned. See B<whatis>(1). This URI scheme is "
12753 "unique to UNIX-like systems (such as Linux) and is not currently registered "
12757 #. type: Plain text
12758 #: build/C/man7/uri.7:357
12759 msgid "B<ghelp - GNOME help documentation>"
12762 #. type: Plain text
12763 #: build/C/man7/uri.7:359
12764 msgid "ghelp:I<name-of-application>"
12767 #. type: Plain text
12768 #: build/C/man7/uri.7:362
12770 "This loads GNOME help for the given application. Note that not much "
12771 "documentation currently exists in this format."
12774 #. type: Plain text
12775 #: build/C/man7/uri.7:364
12776 msgid "B<ldap - Lightweight Directory Access Protocol>"
12779 #. type: Plain text
12780 #: build/C/man7/uri.7:366
12781 msgid "ldap://I<hostport>"
12784 #. type: Plain text
12785 #: build/C/man7/uri.7:368
12786 msgid "ldap://I<hostport>/"
12789 #. type: Plain text
12790 #: build/C/man7/uri.7:370
12791 msgid "ldap://I<hostport>/I<dn>"
12794 #. type: Plain text
12795 #: build/C/man7/uri.7:372
12796 msgid "ldap://I<hostport>/I<dn>?I<attributes>"
12799 #. type: Plain text
12800 #: build/C/man7/uri.7:374
12801 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>"
12804 #. type: Plain text
12805 #: build/C/man7/uri.7:376
12806 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>?I<filter>"
12809 #. type: Plain text
12810 #: build/C/man7/uri.7:378
12811 msgid "ldap://I<hostport>/I<dn>?I<attributes>?I<scope>?I<filter>?I<extensions>"
12814 #. type: Plain text
12815 #: build/C/man7/uri.7:389
12817 "This scheme supports queries to the Lightweight Directory Access Protocol "
12818 "(LDAP), a protocol for querying a set of servers for hierarchically "
12819 "organized information (such as people and computing resources). See E<.UR "
12820 "http://www.ietf.org\\:/rfc\\:/rfc2255.txt> RFC\\ 2255 E<.UE> for more "
12821 "information on the LDAP URL scheme. The components of this URL are:"
12825 #: build/C/man7/uri.7:389
12830 #. type: Plain text
12831 #: build/C/man7/uri.7:394
12833 "the LDAP server to query, written as a hostname optionally followed by a "
12834 "colon and the port number. The default LDAP port is TCP port 389. If "
12835 "empty, the client determines which the LDAP server to use."
12839 #: build/C/man7/uri.7:394
12844 #. type: Plain text
12845 #: build/C/man7/uri.7:401
12847 "the LDAP Distinguished Name, which identifies the base object of the LDAP "
12848 "search (see E<.UR http://www.ietf.org\\:/rfc\\:/rfc2253.txt> RFC\\ 2253 "
12849 "E<.UE> section 3)."
12853 #: build/C/man7/uri.7:401
12858 #. type: Plain text
12859 #: build/C/man7/uri.7:405
12861 "a comma-separated list of attributes to be returned; see RFC\\ 2251 section "
12862 "4.1.5. If omitted, all attributes should be returned."
12866 #: build/C/man7/uri.7:405
12871 #. type: Plain text
12872 #: build/C/man7/uri.7:410
12874 "specifies the scope of the search, which can be one of \"base\" (for a base "
12875 "object search), \"one\" (for a one-level search), or \"sub\" (for a subtree "
12876 "search). If scope is omitted, \"base\" is assumed."
12880 #: build/C/man7/uri.7:410
12885 #. type: Plain text
12886 #: build/C/man7/uri.7:419
12888 "specifies the search filter (subset of entries to return). If omitted, all "
12889 "entries should be returned. See E<.UR "
12890 "http://www.ietf.org\\:/rfc\\:/rfc2254.txt> RFC\\ 2254 E<.UE> section 4."
12894 #: build/C/man7/uri.7:419
12899 #. type: Plain text
12900 #: build/C/man7/uri.7:425
12902 "a comma-separated list of type=value pairs, where the =value portion may be "
12903 "omitted for options not requiring it. An extension prefixed with a "
12904 "\\(aq!\\(aq is critical (must be supported to be valid), otherwise it is "
12905 "noncritical (optional)."
12908 #. type: Plain text
12909 #: build/C/man7/uri.7:429
12911 "LDAP queries are easiest to explain by example. Here's a query that asks "
12912 "ldap.itd.umich.edu for information about the University of Michigan in the "
12916 #. type: Plain text
12917 #: build/C/man7/uri.7:432
12919 msgid "ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US\n"
12922 #. type: Plain text
12923 #: build/C/man7/uri.7:435
12924 msgid "To just get its postal address attribute, request:"
12927 #. type: Plain text
12928 #: build/C/man7/uri.7:438
12930 msgid "ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US?postalAddress\n"
12933 #. type: Plain text
12934 #: build/C/man7/uri.7:442
12936 "To ask a host.com at port 6666 for information about the person with common "
12937 "name (cn) \"Babs Jensen\" at University of Michigan, request:"
12940 #. type: Plain text
12941 #: build/C/man7/uri.7:445
12943 msgid "ldap://host.com:6666/o=University%20of%20Michigan,c=US??sub?(cn=Babs%20Jensen)\n"
12946 #. type: Plain text
12947 #: build/C/man7/uri.7:448
12948 msgid "B<wais - Wide Area Information Servers>"
12951 #. type: Plain text
12952 #: build/C/man7/uri.7:450
12953 msgid "wais://I<hostport>/I<database>"
12956 #. type: Plain text
12957 #: build/C/man7/uri.7:452
12958 msgid "wais://I<hostport>/I<database>?I<search>"
12961 #. type: Plain text
12962 #: build/C/man7/uri.7:454
12963 msgid "wais://I<hostport>/I<database>/I<wtype>/I<wpath>"
12966 #. type: Plain text
12967 #: build/C/man7/uri.7:463
12969 "This scheme designates a WAIS database, search, or document (see E<.UR "
12970 "http://www.ietf.org\\:/rfc\\:/rfc1625.txt> IETF RFC\\ 1625 E<.UE> for more "
12971 "information on WAIS). Hostport is the hostname, optionally followed by a "
12972 "colon and port number (the default port number is 210)."
12975 #. type: Plain text
12976 #: build/C/man7/uri.7:473
12978 "The first form designates a WAIS database for searching. The second form "
12979 "designates a particular search of the WAIS database I<database>. The third "
12980 "form designates a particular document within a WAIS database to be "
12981 "retrieved. I<wtype> is the WAIS designation of the type of the object and "
12982 "I<wpath> is the WAIS document-id."
12985 #. type: Plain text
12986 #: build/C/man7/uri.7:475
12987 msgid "B<other schemes>"
12990 #. type: Plain text
12991 #: build/C/man7/uri.7:489
12993 "There are many other URI schemes. Most tools that accept URIs support a set "
12994 "of internal URIs (e.g., Mozilla has the about: scheme for internal "
12995 "information, and the GNOME help browser has the toc: scheme for various "
12996 "starting locations). There are many schemes that have been defined but are "
12997 "not as widely used at the current time (e.g., prospero). The nntp: scheme "
12998 "is deprecated in favor of the news: scheme. URNs are to be supported by the "
12999 "urn: scheme, with a hierarchical name space (e.g., urn:ietf:... would "
13000 "identify IETF documents); at this time URNs are not widely implemented. Not "
13001 "all tools support all schemes."
13005 #: build/C/man7/uri.7:489
13007 msgid "Character encoding"
13010 #. type: Plain text
13011 #: build/C/man7/uri.7:493
13013 "URIs use a limited number of characters so that they can be typed in and "
13014 "used in a variety of situations."
13017 #. type: Plain text
13018 #: build/C/man7/uri.7:497
13020 "The following characters are reserved, that is, they may appear in a URI but "
13021 "their use is limited to their reserved purpose (conflicting data must be "
13022 "escaped before forming the URI):"
13025 #. type: Plain text
13026 #: build/C/man7/uri.7:499
13028 msgid " ; / ? : @ & = + $ ,\n"
13031 #. type: Plain text
13032 #: build/C/man7/uri.7:505
13034 "Unreserved characters may be included in a URI. Unreserved characters "
13035 "include uppercase and lowercase English letters, decimal digits, and the "
13036 "following limited set of punctuation marks and symbols:"
13039 #. type: Plain text
13040 #: build/C/man7/uri.7:507
13042 msgid " - _ . ! ~ * ' ( )\n"
13045 #. type: Plain text
13046 #: build/C/man7/uri.7:522
13048 "All other characters must be escaped. An escaped octet is encoded as a "
13049 "character triplet, consisting of the percent character \"%\" followed by the "
13050 "two hexadecimal digits representing the octet code (you can use uppercase or "
13051 "lowercase letters for the hexadecimal digits). For example, a blank space "
13052 "must be escaped as \"%20\", a tab character as \"%09\", and the \"&\" as "
13053 "\"%26\". Because the percent \"%\" character always has the reserved "
13054 "purpose of being the escape indicator, it must be escaped as \"%25\". It is "
13055 "common practice to escape space characters as the plus symbol (+) in query "
13056 "text; this practice isn't uniformly defined in the relevant RFCs (which "
13057 "recommend %20 instead) but any tool accepting URIs with query text should be "
13058 "prepared for them. A URI is always shown in its \"escaped\" form."
13061 #. type: Plain text
13062 #: build/C/man7/uri.7:528
13064 "Unreserved characters can be escaped without changing the semantics of the "
13065 "URI, but this should not be done unless the URI is being used in a context "
13066 "that does not allow the unescaped character to appear. For example, \"%7e\" "
13067 "is sometimes used instead of \"~\" in an HTTP URL path, but the two are "
13068 "equivalent for an HTTP URL."
13071 #. type: Plain text
13072 #: build/C/man7/uri.7:532
13074 "For URIs which must handle characters outside the US ASCII character set, "
13075 "the HTML 4.01 specification (section B.2) and IETF RFC\\ 2718 (section "
13076 "2.2.5) recommend the following approach:"
13079 #. type: Plain text
13080 #: build/C/man7/uri.7:536
13082 "translate the character sequences into UTF-8 (IETF RFC\\ 2279)\\(emsee "
13083 "B<utf-8>(7)\\(emand then"
13086 #. type: Plain text
13087 #: build/C/man7/uri.7:539
13089 "use the URI escaping mechanism, that is, use the %HH encoding for unsafe "
13094 #: build/C/man7/uri.7:539
13096 msgid "Writing a URI"
13099 #. type: Plain text
13100 #: build/C/man7/uri.7:562
13102 "When written, URIs should be placed inside double quotes (e.g., "
13103 "\"http://www.kernelnotes.org\"), enclosed in angle brackets (e.g., "
13104 "E<lt>http://lwn.netE<gt>), or placed on a line by themselves. A warning for "
13105 "those who use double-quotes: B<never> move extraneous punctuation (such as "
13106 "the period ending a sentence or the comma in a list) inside a URI, since "
13107 "this will change the value of the URI. Instead, use angle brackets instead, "
13108 "or switch to a quoting system that never includes extraneous characters "
13109 "inside quotation marks. This latter system, called the 'new' or 'logical' "
13110 "quoting system by \"Hart's Rules\" and the \"Oxford Dictionary for Writers "
13111 "and Editors\", is preferred practice in Great Britain and hackers worldwide "
13112 "(see the Jargon File's section on Hacker Writing Style, E<.UR "
13113 "http://www.fwi.uva.nl\\:/~mes\\:/jargon\\:/h\\:/HackerWritingStyle.html> "
13114 "E<.UE ,> for more information). Older documents suggested inserting the "
13115 "prefix \"URL:\" just before the URI, but this form has never caught on."
13118 #. type: Plain text
13119 #: build/C/man7/uri.7:584
13121 "The URI syntax was designed to be unambiguous. However, as URIs have become "
13122 "commonplace, traditional media (television, radio, newspapers, billboards, "
13123 "etc.) have increasingly used abbreviated URI references consisting of only "
13124 "the authority and path portions of the identified resource (e.g., "
13125 "E<lt>www.w3.org/AddressingE<gt>). Such references are primarily intended "
13126 "for human interpretation rather than machine, with the assumption that "
13127 "context-based heuristics are sufficient to complete the URI (e.g., hostnames "
13128 "beginning with \"www\" are likely to have a URI prefix of \"http://\" and "
13129 "hostnames beginning with \"ftp\" likely to have a prefix of \"ftp://\"). "
13130 "Many client implementations heuristically resolve these references. Such "
13131 "heuristics may change over time, particularly when new schemes are "
13132 "introduced. Since an abbreviated URI has the same syntax as a relative URL "
13133 "path, abbreviated URI references cannot be used where relative URIs are "
13134 "permitted, and can be used only when there is no defined base (such as in "
13135 "dialog boxes). Don't use abbreviated URIs as hypertext links inside a "
13136 "document; use the standard format as described here."
13139 #. type: Plain text
13140 #: build/C/man7/uri.7:592
13142 "E<.UR http://www.ietf.org\\:/rfc\\:/rfc2396.txt> (IETF RFC\\ 2396) E<.UE ,> "
13143 "E<.UR http://www.w3.org\\:/TR\\:/REC-html40> (HTML 4.0) E<.UE .>"
13146 #. type: Plain text
13147 #: build/C/man7/uri.7:598
13149 "Any tool accepting URIs (e.g., a web browser) on a Linux system should be "
13150 "able to handle (directly or indirectly) all of the schemes described here, "
13151 "including the man: and info: schemes. Handling them by invoking some other "
13152 "program is fine and in fact encouraged."
13155 #. type: Plain text
13156 #: build/C/man7/uri.7:600
13157 msgid "Technically the fragment isn't part of the URI."
13160 #. type: Plain text
13161 #: build/C/man7/uri.7:609
13163 "For information on how to embed URIs (including URLs) in a data format, see "
13164 "documentation on that format. HTML uses the format E<lt>A "
13165 "HREF=\"I<uri>\"E<gt> I<text> E<lt>/AE<gt>. Texinfo files use the format "
13166 "@uref{I<uri>}. Man and mdoc have the recently added UR macro, or just "
13167 "include the URI in the text (viewers should be able to detect :// as part of "
13171 #. type: Plain text
13172 #: build/C/man7/uri.7:630
13174 "The GNOME and KDE desktop environments currently vary in the URIs they "
13175 "accept, in particular in their respective help browsers. To list man pages, "
13176 "GNOME uses E<lt>toc:manE<gt> while KDE uses E<lt>man:(index)E<gt>, and to "
13177 "list info pages, GNOME uses E<lt>toc:infoE<gt> while KDE uses "
13178 "E<lt>info:(dir)E<gt> (the author of this man page prefers the KDE approach "
13179 "here, though a more regular format would be even better). In general, KDE "
13180 "uses E<lt>file:/cgi-bin/E<gt> as a prefix to a set of generated files. KDE "
13181 "prefers documentation in HTML, accessed via the "
13182 "E<lt>file:/cgi-bin/helpindexE<gt>. GNOME prefers the ghelp scheme to store "
13183 "and find documentation. Neither browser handles file: references to "
13184 "directories at the time of this writing, making it difficult to refer to an "
13185 "entire directory with a browsable URI. As noted above, these environments "
13186 "differ in how they handle the info: scheme, probably the most important "
13187 "variation. It is expected that GNOME and KDE will converge to common URI "
13188 "formats, and a future version of this man page will describe the converged "
13189 "result. Efforts to aid this convergence are encouraged."
13193 #: build/C/man7/uri.7:630
13198 #. type: Plain text
13199 #: build/C/man7/uri.7:640
13201 "A URI does not in itself pose a security threat. There is no general "
13202 "guarantee that a URL, which at one time located a given resource, will "
13203 "continue to do so. Nor is there any guarantee that a URL will not locate a "
13204 "different resource at some later point in time; such a guarantee can be "
13205 "obtained only from the person(s) controlling that namespace and the resource "
13209 #. type: Plain text
13210 #: build/C/man7/uri.7:655
13212 "It is sometimes possible to construct a URL such that an attempt to perform "
13213 "a seemingly harmless operation, such as the retrieval of an entity "
13214 "associated with the resource, will in fact cause a possibly damaging remote "
13215 "operation to occur. The unsafe URL is typically constructed by specifying a "
13216 "port number other than that reserved for the network protocol in question. "
13217 "The client unwittingly contacts a site that is in fact running a different "
13218 "protocol. The content of the URL contains instructions that, when "
13219 "interpreted according to this other protocol, cause an unexpected "
13220 "operation. An example has been the use of a gopher URL to cause an "
13221 "unintended or impersonating message to be sent via a SMTP server."
13224 #. type: Plain text
13225 #: build/C/man7/uri.7:659
13227 "Caution should be used when using any URL that specifies a port number other "
13228 "than the default for the protocol, especially when it is a number within the "
13232 #. type: Plain text
13233 #: build/C/man7/uri.7:667
13235 "Care should be taken when a URI contains escaped delimiters for a given "
13236 "protocol (for example, CR and LF characters for telnet protocols) that these "
13237 "are not unescaped before transmission. This might violate the protocol, but "
13238 "avoids the potential for such characters to be used to simulate an extra "
13239 "operation or parameter in that protocol, which might lead to an unexpected "
13240 "and possibly harmful remote operation to be performed."
13243 #. type: Plain text
13244 #: build/C/man7/uri.7:673
13246 "It is clearly unwise to use a URI that contains a password which is intended "
13247 "to be secret. In particular, the use of a password within the \"userinfo\" "
13248 "component of a URI is strongly recommended against except in those rare "
13249 "cases where the \"password\" parameter is intended to be public."
13252 #. type: Plain text
13253 #: build/C/man7/uri.7:695
13255 "Documentation may be placed in a variety of locations, so there currently "
13256 "isn't a good URI scheme for general online documentation in arbitrary "
13257 "formats. References of the form E<lt>file:///usr/doc/ZZZE<gt> don't work "
13258 "because different distributions and local installation requirements may "
13259 "place the files in different directories (it may be in /usr/doc, or "
13260 "/usr/local/doc, or /usr/share, or somewhere else). Also, the directory ZZZ "
13261 "usually changes when a version changes (though filename globbing could "
13262 "partially overcome this). Finally, using the file: scheme doesn't easily "
13263 "support people who dynamically load documentation from the Internet (instead "
13264 "of loading the files onto a local filesystem). A future URI scheme may be "
13265 "added (e.g., \"userdoc:\") to permit programs to include cross-references to "
13266 "more detailed documentation without having to know the exact location of "
13267 "that documentation. Alternatively, a future version of the filesystem "
13268 "specification may specify file locations sufficiently so that the file: "
13269 "scheme will be able to locate documentation."
13272 #. type: Plain text
13273 #: build/C/man7/uri.7:698
13275 "Many programs and file formats don't include a way to incorporate or "
13276 "implement links using URIs."
13280 #. David A. Wheeler (dwheeler@dwheeler.com) wrote this man page.
13281 #. type: Plain text
13282 #: build/C/man7/uri.7:706
13284 "Many programs can't handle all of these different URI formats; there should "
13285 "be a standard mechanism to load an arbitrary URI that automatically detects "
13286 "the users' environment (e.g., text or graphics, desktop environment, local "
13287 "user preferences, and currently executing tools) and invokes the right tool "
13291 #. type: Plain text
13292 #: build/C/man7/uri.7:711
13293 msgid "B<lynx>(1), B<man2html>(1), B<mailaddr>(7), B<utf-8>(7)"
13296 #. type: Plain text
13297 #: build/C/man7/uri.7:715
13298 msgid "E<.UR http://www.ietf.org\\:/rfc\\:/rfc2255.txt> IETF RFC\\ 2255 E<.UE>"
13302 #: build/C/man4/vcs.4:29
13308 #: build/C/man4/vcs.4:29
13313 #. type: Plain text
13314 #: build/C/man4/vcs.4:32
13315 msgid "vcs, vcsa - virtual console memory"
13318 #. type: Plain text
13319 #: build/C/man4/vcs.4:38
13321 "I</dev/vcs0> is a character device with major number 7 and minor number 0, "
13322 "usually of mode 0644 and owner root.tty. It refers to the memory of the "
13323 "currently displayed virtual console terminal."
13326 #. type: Plain text
13327 #: build/C/man4/vcs.4:58
13329 "I</dev/vcs[1-63]> are character devices for virtual console terminals, they "
13330 "have major number 7 and minor number 1 to 63, usually mode 0644 and owner "
13331 "root.tty. I</dev/vcsa[0-63]> are the same, but using I<unsigned short>s (in "
13332 "host byte order) that include attributes, and prefixed with four bytes "
13333 "giving the screen dimensions and cursor position: I<lines>, I<columns>, "
13334 "I<x>, I<y>. (I<x> = I<y> = 0 at the top left corner of the screen.)"
13337 #. type: Plain text
13338 #: build/C/man4/vcs.4:72
13340 "When a 512-character font is loaded, the 9th bit position can be fetched by "
13341 "applying the B<ioctl>(2) B<VT_GETHIFONTMASK> operation (available in Linux "
13342 "kernels 2.6.18 and above) on I</dev/tty[1-63]>; the value is returned in "
13343 "the I<unsigned short> pointed to by the third B<ioctl>(2) argument."
13346 #. type: Plain text
13347 #: build/C/man4/vcs.4:79
13349 "These devices replace the screendump B<ioctl>(2) operations of "
13350 "B<console>(4), so the system administrator can control access using "
13351 "filesystem permissions."
13354 #. type: Plain text
13355 #: build/C/man4/vcs.4:81
13356 msgid "The devices for the first eight virtual consoles may be created by:"
13359 #. type: Plain text
13360 #: build/C/man4/vcs.4:88
13363 " for x in 0 1 2 3 4 5 6 7 8; do\n"
13364 " mknod -m 644 /dev/vcs$x c 7 $x;\n"
13365 " mknod -m 644 /dev/vcsa$x c 7 $[$x+128];\n"
13367 " chown root:tty /dev/vcs*\n"
13370 #. type: Plain text
13371 #: build/C/man4/vcs.4:93
13372 msgid "No B<ioctl>(2) requests are supported."
13375 #. type: Plain text
13376 #: build/C/man4/vcs.4:95
13377 msgid "/dev/vcs[0-63]"
13381 #. Andries Brouwer <aeb@cwi.nl>
13382 #. type: Plain text
13383 #: build/C/man4/vcs.4:99
13384 msgid "/dev/vcsa[0-63]"
13387 #. type: Plain text
13388 #: build/C/man4/vcs.4:101
13389 msgid "Introduced with version 1.1.92 of the Linux kernel."
13392 #. type: Plain text
13393 #: build/C/man4/vcs.4:103
13394 msgid "You may do a screendump on vt3 by switching to vt1 and typing"
13397 #. type: Plain text
13398 #: build/C/man4/vcs.4:105
13400 msgid " cat /dev/vcs3 E<gt>foo\n"
13403 #. type: Plain text
13404 #: build/C/man4/vcs.4:109
13406 "Note that the output does not contain newline characters, so some processing "
13407 "may be required, like in"
13410 #. type: Plain text
13411 #: build/C/man4/vcs.4:111
13413 msgid " old -w 81 /dev/vcs3 | lpr\n"
13416 #. type: Plain text
13417 #: build/C/man4/vcs.4:113
13418 msgid "or (horrors)"
13421 #. type: Plain text
13422 #: build/C/man4/vcs.4:115
13424 msgid " xetterm -dump 3 -file /proc/self/fd/1\n"
13427 #. type: Plain text
13428 #: build/C/man4/vcs.4:120
13429 msgid "The I</dev/vcsa0> device is used for Braille support."
13432 #. type: Plain text
13433 #: build/C/man4/vcs.4:124
13435 "This program displays the character and screen attributes under the cursor "
13436 "of the second virtual console, then changes the background color there:"
13439 #. type: Plain text
13440 #: build/C/man4/vcs.4:132
13443 "#include E<lt>unistd.hE<gt>\n"
13444 "#include E<lt>stdlib.hE<gt>\n"
13445 "#include E<lt>stdio.hE<gt>\n"
13446 "#include E<lt>fcntl.hE<gt>\n"
13447 "#include E<lt>sys/ioctl.hE<gt>\n"
13448 "#include E<lt>linux/vt.hE<gt>\n"
13451 #. type: Plain text
13452 #: build/C/man4/vcs.4:143
13459 " char *device = \"/dev/vcsa2\";\n"
13460 " char *console = \"/dev/tty2\";\n"
13461 " struct {unsigned char lines, cols, x, y;} scrn;\n"
13462 " unsigned short s;\n"
13463 " unsigned short mask;\n"
13464 " unsigned char ch, attrib;\n"
13467 #. type: Plain text
13468 #: build/C/man4/vcs.4:172
13471 " fd = open(console, O_RDWR);\n"
13472 " if (fd E<lt> 0) {\n"
13473 " perror(console);\n"
13474 " exit(EXIT_FAILURE);\n"
13476 " if (ioctl(fd, VT_GETHIFONTMASK, &mask) E<lt> 0) {\n"
13477 " perror(\"VT_GETHIFONTMASK\");\n"
13478 " exit(EXIT_FAILURE);\n"
13480 " (void) close(fd);\n"
13481 " fd = open(device, O_RDWR);\n"
13482 " if (fd E<lt> 0) {\n"
13483 " perror(device);\n"
13484 " exit(EXIT_FAILURE);\n"
13486 " (void) read(fd, &scrn, 4);\n"
13487 " (void) lseek(fd, 4 + 2*(scrn.y*scrn.cols + scrn.x), 0);\n"
13488 " (void) read(fd, &s, 2);\n"
13489 " ch = s & 0xff;\n"
13490 " if (attrib & mask)\n"
13492 " attrib = ((s & ~mask) E<gt>E<gt> 8);\n"
13493 " printf(\"ch=\\(aq%c\\(aq attrib=0x%02x\\en\", ch, attrib);\n"
13494 " attrib ^= 0x10;\n"
13495 " (void) lseek(fd, -1, 1);\n"
13496 " (void) write(fd, &attrib, 1);\n"
13497 " exit(EXIT_SUCCESS);\n"
13501 #. type: Plain text
13502 #: build/C/man4/vcs.4:178
13503 msgid "B<console>(4), B<tty>(4), B<ttyS>(4), B<gpm>(8)"
13507 #: build/C/man4/wavelan.4:15
13513 #: build/C/man4/wavelan.4:15
13518 #. type: Plain text
13519 #: build/C/man4/wavelan.4:18
13520 msgid "wavelan - AT&T GIS WaveLAN ISA device driver"
13523 #. type: Plain text
13524 #: build/C/man4/wavelan.4:20
13526 "B<insmod wavelan_cs.o [io=>I<B,B..>B<] [ irq=>I<I,I..>B<] "
13527 "[name=>I<N,N..>B<]>"
13530 #. type: Plain text
13531 #: build/C/man4/wavelan.4:23
13533 "I<This driver is obsolete:> it was removed from the kernel in version "
13537 #. type: Plain text
13538 #: build/C/man4/wavelan.4:39
13540 "I<wavelan> is the low-level device driver for the NCR / AT&T / Lucent "
13541 "B<WaveLAN ISA> and Digital (DEC) B<RoamAbout DS> wireless ethernet "
13542 "adapter. This driver is available as a module or might be compiled in the "
13543 "kernel. This driver supports multiple cards in both forms (up to 4) and "
13544 "allocates the next available ethernet device (eth0..eth#) for each card "
13545 "found, unless a device name is explicitly specified (see below). This "
13546 "device name will be reported in the kernel log file with the MAC address, "
13547 "NWID and frequency used by the card."
13550 #. type: Plain text
13551 #: build/C/man4/wavelan.4:46
13553 "This section apply to the module form (parameters passed on the B<insmod>(8) "
13554 "command line). If the driver is included in the kernel, use the "
13555 "I<ether=IRQ,IO,NAME> syntax on the kernel command line."
13559 #: build/C/man4/wavelan.4:46
13564 #. type: Plain text
13565 #: build/C/man4/wavelan.4:53
13567 "Specify the list of base address where to search for wavelan cards (setting "
13568 "by dip switch on the card). If you don't specify any io address, the driver "
13569 "will scan 0x390 and 0x3E0 addresses, which might conflict with other "
13574 #: build/C/man4/wavelan.4:53
13579 #. type: Plain text
13580 #: build/C/man4/wavelan.4:57
13582 "Set the list of irq that each wavelan card should use (the value is saved in "
13583 "permanent storage for future use)."
13587 #: build/C/man4/wavelan.4:57
13592 #. type: Plain text
13593 #: build/C/man4/wavelan.4:62
13595 "Set the list of name to be used for each wavelan cards device (name used by "
13600 #: build/C/man4/wavelan.4:62
13602 msgid "Wireless extensions"
13605 #. type: Plain text
13606 #: build/C/man4/wavelan.4:66
13607 msgid "Use B<iwconfig>(8) to manipulate wireless extensions."
13611 #: build/C/man4/wavelan.4:66
13613 msgid "NWID (or domain)"
13616 #. type: Plain text
13617 #: build/C/man4/wavelan.4:75
13619 "Set the network ID [I<0> to I<FFFF>] or disable it [I<off>]. As the NWID is "
13620 "stored in the card Permanent Storage Area, it will be reuse at any further "
13621 "invocation of the driver."
13625 #: build/C/man4/wavelan.4:75
13627 msgid "Frequency & channels"
13630 #. type: Plain text
13631 #: build/C/man4/wavelan.4:86
13633 "For the 2.4GHz 2.00 Hardware, you are able to set the frequency by "
13634 "specifying one of the 10 defined channels (I<2.412,> I<2.422, 2.425, 2.4305, "
13635 "2.432, 2.442, 2.452, 2.460, 2.462> or I<2.484>) or directly by its value. "
13636 "The frequency is changed immediately and permanently. Frequency "
13637 "availability depends on the regulations..."
13641 #: build/C/man4/wavelan.4:86
13643 msgid "Statistics spy"
13646 #. type: Plain text
13647 #: build/C/man4/wavelan.4:90
13649 "Set a list of MAC addresses in the driver (up to 8) and get the last quality "
13650 "of link for each of those (see B<iwspy>(8))."
13654 #: build/C/man4/wavelan.4:90
13656 msgid "/proc/net/wireless"
13659 #. type: Plain text
13660 #: build/C/man4/wavelan.4:105
13662 "I<status> is the status reported by the modem. I<Link quality> reports the "
13663 "quality of the modulation on the air (direct sequence spread spectrum) [max "
13664 "= 16]. I<Level> and I<Noise> refer to the signal level and noise level [max "
13665 "= 64]. The I<crypt discarded packet> and I<misc discarded packet> counters "
13666 "are not implemented."
13670 #: build/C/man4/wavelan.4:105
13672 msgid "Private ioctl"
13675 #. type: Plain text
13676 #: build/C/man4/wavelan.4:109
13677 msgid "You may use B<iwpriv>(8) to manipulate private ioctls."
13681 #: build/C/man4/wavelan.4:109
13683 msgid "Quality and level threshold"
13686 #. type: Plain text
13687 #: build/C/man4/wavelan.4:112
13689 "Enable you the define the quality and level threshold used by the modem "
13690 "(packet below that level are discarded)."
13694 #: build/C/man4/wavelan.4:112
13699 #. type: Plain text
13700 #: build/C/man4/wavelan.4:119
13702 "This functionality makes it possible to set a number of signal level "
13703 "intervals and to count the number of packets received in each of those "
13704 "defined intervals. This distribution might be used to calculate the mean "
13705 "value and standard deviation of the signal level."
13709 #: build/C/man4/wavelan.4:119
13711 msgid "Specific notes"
13714 #. type: Plain text
13715 #: build/C/man4/wavelan.4:125
13717 "This driver will fail to detect some B<non-NCR/ATT&T/Lucent> Wavelan cards. "
13718 "If this happens for you, you must look in the source code on how to add your "
13719 "card to the detection routine."
13723 #. Bruce Janson \(em bruce@cs.usyd.edu.au
13725 #. Jean Tourrilhes \(em jt@hplb.hpl.hp.com
13727 #. (and others; see source code for details)
13730 #. type: Plain text
13731 #: build/C/man4/wavelan.4:138
13733 "Some of the mentioned features are optional. You may enable to disable them "
13734 "by changing flags in the driver header and recompile."
13737 #. type: Plain text
13738 #: build/C/man4/wavelan.4:145
13740 "B<wavelan_cs>(4), B<ifconfig>(8), B<insmod>(8), B<iwconfig>(8), "
13741 "B<iwpriv>(8), B<iwspy>(8)"