regenerated PDFs

diff --git a/README b/README
index 3be4ce6..1d7154c 100644 (file)
--- a/README
+++ b/README
@@ -26,8 +26,6 @@ Installation
     - luaotfload (v3.1 or later recommended)
     - adobemapping (Adobe CMap files)
     - LaTeX2e 2020-02-02 patch level 5 or later (if you want to use with LaTeX)
-      Note that the adaptation for LaTeX2e 2021-05-01 is 
-      work in progress; it will be done after the freeze of TL'20
     - etoolbox package
     - ltxcmds package, pdftexcmds package
     - filehook package, atbegshi package (for LaTeX2e 2020-02-02)
@@ -39,7 +37,7 @@ Installation
    One might be able to typeset documents without an error, but with
    some unwanted results.
 
-1. If you are using TeX Live 2020, you can install LuaTeX-ja via tlmgr.
+1. If you are using TeX Live 2021, you can install LuaTeX-ja via tlmgr.
 
 2. If you must/want to install manually:
 
@@ -91,7 +89,7 @@ Notes
 
 * src/*.{ins.dtx} are not needed in regular use.
 
-* ltj-kinsoku_make.tex is removed in version 20200808.0. 
+* ltj-kinsoku_make.tex is removed in version 20200808.0.
   This file and ltj-kinsoku.lua are not used anymore.
   (Do not remove ltj-kinsoku.tex.)
 

diff --git a/doc/luatexja-en.pdf b/doc/luatexja-en.pdf
index a405018..e0bc221 100644 (file)
Binary files a/doc/luatexja-en.pdf and b/doc/luatexja-en.pdf differ

diff --git a/doc/luatexja-ja.pdf b/doc/luatexja-ja.pdf
index ee3964d..41f5012 100644 (file)
Binary files a/doc/luatexja-ja.pdf and b/doc/luatexja-ja.pdf differ

diff --git a/doc/luatexja.dtx b/doc/luatexja.dtx
index 308288d..7e6ccb9 100644 (file)
--- a/doc/luatexja.dtx
+++ b/doc/luatexja.dtx
@@ -25,10 +25,11 @@
 \setmonofont[RawFeature=-notdef, Ligatures=CommonOff, %CharacterVariant={31,45,61,36},
 %<en>  Scale=0.8132073118633364, FakeStretch=1.183236,
 %<ja>  Scale=MatchLowercase, FakeStretch=1.137121,
-  Contextuals=AlternateOff,
-  ItalicFont=Iosevka Term Slab Oblique,
-  BoldFont=Iosevka Term Slab Bold, BoldItalicFont=Iosevka Term Slab Bold Oblique,
-]{Iosevka Term Slab}
+  Contextuals=AlternateOff, Kerning=Off,
+  Ligatures={CommonOff,RequiredOff,ContextualOff,RareOff,HistoricOff,TeXOff},
+  ItalicFont=Iosevka Slab Oblique,
+  BoldFont=Iosevka Slab Bold, BoldItalicFont=Iosevka Slab Bold Oblique,
+]{Iosevka Slab}
 \setsansfont[Scale=MatchLowercase,Ligatures=TeX,RawFeature=-notdef]{Linux Biolinum O}
 \usepackage[match]{luatexja-fontspec}
 \usepackage[haranoaji]{luatexja-preset}
@@ -225,7 +226,7 @@
 }
 
 \catcode`\<=13
-\def<#1>{{\normalfont\rm\itshape$\langle$#1\/$\rangle$}}
+\def<#1>{{\normalfont\rmfamily\itshape$\langle$#1\/$\rangle$}}
 \let\LARG=<
 \maketitle
 
@@ -5667,7 +5668,7 @@ The default value is \texttt{paverage}. \dots
 \item[\DParam{jacharrange}\,=<ranges>]
 \item[\DParam{kansujichar}\,=\{<digit>, <chr\_code>\}$^\ast$] [\cs{kansujichar}]
 
-\item[\DParam{direction}\,=<dir>\ \hbox{\rm (always local)}]\
+\item[\DParam{direction}\,=<dir>\ \hbox{\normalfont\rmfamily (always local)}]\
 
 %<*en>
 Assigning to this parameter has the same effect as
@@ -10458,7 +10459,7 @@ If this attempt fails, \LuaTeX-ja use the method ``\textsf{\Param{kanjiskip}~[K]
 \item \textit{Np}の中身の文字コードについて，「直前への\Param{xkanjiskip}の挿入」が禁止されている
 （つまり，\Param{jaxspmode}~(or \Param{alxspmode})パラメータが偶数）．
 \end{itemize}
-\item ユーザ側から見た\Param{xkanjiskip}パラメータの自然長が$\cs{maxdimen}=(2^{30}-1)\,{\rm sp}$で
+\item ユーザ側から見た\Param{xkanjiskip}パラメータの自然長が$\cs{maxdimen}=(2^{30}-1)\,\textrm{sp}$で
 なければ，\Param{xkanjiskip}パラメータの値を持つglueを採用する．
 \item 2.でない場合は，\textit{Nq}, \textit{Np}（\textsf{和文A}/\textsf{和文B}なのは片方だけ）
 で使われているJFMに指定されている\Param{xkanjiskip}の値を用いる．