- applet
- cleanup
--->
-<project name="mdc2-impl" default="default" basedir=".." xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:j2seproject2="http://www.netbeans.org/ns/j2se-project/2" xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:jaxws="http://www.netbeans.org/ns/jax-ws/1">
- <target name="default" depends="test,jar,javadoc" description="Build and test whole project."/>
- <!--
- ======================
- INITIALIZATION SECTION
- ======================
- -->
- <target name="-pre-init">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-init-private" depends="-pre-init">
- <property file="nbproject/private/private.properties"/>
- </target>
- <target name="-init-user" depends="-pre-init,-init-private">
- <property file="${user.properties.file}"/>
- <!-- The two properties below are usually overridden -->
- <!-- by the active platform. Just a fallback. -->
- <property name="default.javac.source" value="1.4"/>
- <property name="default.javac.target" value="1.4"/>
- </target>
- <target name="-init-project" depends="-pre-init,-init-private,-init-user">
- <property file="nbproject/project.properties"/>
- </target>
- <target name="-do-init" depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property">
- <available file="${manifest.file}" property="manifest.available"/>
- <condition property="manifest.available+main.class">
- <and>
- <isset property="manifest.available"/>
- <isset property="main.class"/>
- <not>
- <equals arg1="${main.class}" arg2="" trim="true"/>
- </not>
- </and>
- </condition>
- <condition property="manifest.available+main.class+mkdist.available">
- <and>
- <istrue value="${manifest.available+main.class}"/>
- <isset property="libs.CopyLibs.classpath"/>
- </and>
- </condition>
- <condition property="have.tests">
- <or>
- <available file="${test.test.dir}"/>
- </or>
- </condition>
- <condition property="have.sources">
- <or>
- <available file="${src.src.dir}"/>
- </or>
- </condition>
- <condition property="netbeans.home+have.tests">
- <and>
- <isset property="netbeans.home"/>
- <isset property="have.tests"/>
- </and>
- </condition>
- <condition property="no.javadoc.preview">
- <isfalse value="${javadoc.preview}"/>
- </condition>
- <property name="run.jvmargs" value=""/>
- <property name="javac.compilerargs" value=""/>
- <property name="work.dir" value="${basedir}"/>
- <condition property="no.deps">
- <and>
- <istrue value="${no.dependencies}"/>
- </and>
- </condition>
- <property name="javac.debug" value="true"/>
- <property name="javadoc.preview" value="true"/>
- </target>
- <target name="-post-init">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-init-check" depends="-pre-init,-init-private,-init-user,-init-project,-do-init">
- <fail unless="src.src.dir">Must set src.src.dir</fail>
- <fail unless="test.test.dir">Must set test.test.dir</fail>
- <fail unless="build.dir">Must set build.dir</fail>
- <fail unless="dist.dir">Must set dist.dir</fail>
- <fail unless="build.classes.dir">Must set build.classes.dir</fail>
- <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
- <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
- <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
- <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
- <fail unless="dist.jar">Must set dist.jar</fail>
- </target>
- <target name="-init-macrodef-property">
- <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
- <attribute name="name"/>
- <attribute name="value"/>
- <sequential>
- <property name="@{name}" value="${@{value}}"/>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-macrodef-javac">
- <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
- <attribute name="srcdir" default="${src.src.dir}"/>
- <attribute name="destdir" default="${build.classes.dir}"/>
- <attribute name="classpath" default="${javac.classpath}"/>
- <attribute name="debug" default="${javac.debug}"/>
- <element name="customize" optional="true"/>
- <sequential>
- <javac srcdir="@{srcdir}" destdir="@{destdir}" debug="@{debug}" deprecation="${javac.deprecation}" source="${javac.source}" target="${javac.target}" includeantruntime="false">
- <classpath>
- <path path="@{classpath}"/>
- </classpath>
- <compilerarg line="${javac.compilerargs}"/>
- <customize/>
- </javac>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-macrodef-junit">
- <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
- <attribute name="includes" default="**/*Test.java"/>
- <sequential>
- <junit showoutput="true" fork="true" dir="${basedir}" failureproperty="tests.failed" errorproperty="tests.failed">
- <batchtest todir="${build.test.results.dir}">
- <fileset dir="${test.test.dir}" includes="@{includes}"/>
- </batchtest>
- <classpath>
- <path path="${run.test.classpath}"/>
- </classpath>
- <syspropertyset>
- <propertyref prefix="test-sys-prop."/>
- <mapper type="glob" from="test-sys-prop.*" to="*"/>
- </syspropertyset>
- <formatter type="brief" usefile="false"/>
- <formatter type="xml"/>
- <jvmarg line="${run.jvmargs}"/>
- </junit>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-macrodef-nbjpda">
- <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
- <attribute name="name" default="${main.class}"/>
- <attribute name="classpath" default="${debug.classpath}"/>
- <attribute name="stopclassname" default=""/>
- <sequential>
- <nbjpdastart transport="dt_socket" addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}">
- <classpath>
- <path path="@{classpath}"/>
- </classpath>
- </nbjpdastart>
- </sequential>
- </macrodef>
- <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
- <attribute name="dir" default="${build.classes.dir}"/>
- <sequential>
- <nbjpdareload>
- <fileset includes="${fix.includes}*.class" dir="@{dir}"/>
- </nbjpdareload>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-macrodef-debug">
- <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
- <attribute name="classname" default="${main.class}"/>
- <attribute name="classpath" default="${debug.classpath}"/>
- <element name="customize" optional="true"/>
- <sequential>
- <java fork="true" classname="@{classname}" dir="${work.dir}">
- <jvmarg value="-Xdebug"/>
- <jvmarg value="-Xnoagent"/>
- <jvmarg value="-Djava.compiler=none"/>
- <jvmarg value="-Xrunjdwp:transport=dt_socket,address=${jpda.address}"/>
- <jvmarg line="${run.jvmargs}"/>
- <classpath>
- <path path="@{classpath}"/>
- </classpath>
- <syspropertyset>
- <propertyref prefix="run-sys-prop."/>
- <mapper type="glob" from="run-sys-prop.*" to="*"/>
- </syspropertyset>
- <customize/>
- </java>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-macrodef-java">
- <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
- <attribute name="classname" default="${main.class}"/>
- <element name="customize" optional="true"/>
- <sequential>
- <java fork="true" classname="@{classname}" dir="${work.dir}">
- <jvmarg line="${run.jvmargs}"/>
- <classpath>
+ -->
+<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject2="http://www.netbeans.org/ns/j2se-project/2" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="mdc2-impl">
+ <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>
+ <!--
+ ======================
+ INITIALIZATION SECTION
+ ======================
+ -->
+ <target name="-pre-init">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="-pre-init" name="-init-private">
+ <property file="nbproject/private/config.properties"/>
+ <property file="nbproject/private/configs/${config}.properties"/>
+ <property file="nbproject/private/private.properties"/>
+ </target>
+ <target depends="-pre-init,-init-private" name="-init-user">
+ <property file="${user.properties.file}"/>
+ <!-- The two properties below are usually overridden -->
+ <!-- by the active platform. Just a fallback. -->
+ <property name="default.javac.source" value="1.4"/>
+ <property name="default.javac.target" value="1.4"/>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user" name="-init-project">
+ <property file="nbproject/configs/${config}.properties"/>
+ <property file="nbproject/project.properties"/>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">
+ <j2seproject1:property name="platform.home" value="platforms.${platform.active}.home"/>
+ <j2seproject1:property name="platform.bootcp" value="platforms.${platform.active}.bootclasspath"/>
+ <j2seproject1:property name="platform.compiler" value="platforms.${platform.active}.compile"/>
+ <j2seproject1:property name="platform.javac.tmp" value="platforms.${platform.active}.javac"/>
+ <condition property="platform.javac" value="${platform.home}/bin/javac">
+ <equals arg1="${platform.javac.tmp}" arg2="$${platforms.${platform.active}.javac}"/>
+ </condition>
+ <property name="platform.javac" value="${platform.javac.tmp}"/>
+ <j2seproject1:property name="platform.java.tmp" value="platforms.${platform.active}.java"/>
+ <condition property="platform.java" value="${platform.home}/bin/java">
+ <equals arg1="${platform.java.tmp}" arg2="$${platforms.${platform.active}.java}"/>
+ </condition>
+ <property name="platform.java" value="${platform.java.tmp}"/>
+ <j2seproject1:property name="platform.javadoc.tmp" value="platforms.${platform.active}.javadoc"/>
+ <condition property="platform.javadoc" value="${platform.home}/bin/javadoc">
+ <equals arg1="${platform.javadoc.tmp}" arg2="$${platforms.${platform.active}.javadoc}"/>
+ </condition>
+ <property name="platform.javadoc" value="${platform.javadoc.tmp}"/>
+ <condition property="platform.invalid" value="true">
+ <or>
+ <contains string="${platform.javac}" substring="$${platforms."/>
+ <contains string="${platform.java}" substring="$${platforms."/>
+ <contains string="${platform.javadoc}" substring="$${platforms."/>
+ </or>
+ </condition>
+ <fail unless="platform.home">Must set platform.home</fail>
+ <fail unless="platform.bootcp">Must set platform.bootcp</fail>
+ <fail unless="platform.java">Must set platform.java</fail>
+ <fail unless="platform.javac">Must set platform.javac</fail>
+ <fail if="platform.invalid">Platform is not correctly set up</fail>
+ <available file="${manifest.file}" property="manifest.available"/>
+ <condition property="manifest.available+main.class">
+ <and>
+ <isset property="manifest.available"/>
+ <isset property="main.class"/>
+ <not>
+ <equals arg1="${main.class}" arg2="" trim="true"/>
+ </not>
+ </and>
+ </condition>
+ <condition property="manifest.available+main.class+mkdist.available">
+ <and>
+ <istrue value="${manifest.available+main.class}"/>
+ <isset property="libs.CopyLibs.classpath"/>
+ </and>
+ </condition>
+ <condition property="have.tests">
+ <or>
+ <available file="${test.test.dir}"/>
+ </or>
+ </condition>
+ <condition property="have.sources">
+ <or>
+ <available file="${src.src.dir}"/>
+ </or>
+ </condition>
+ <condition property="netbeans.home+have.tests">
+ <and>
+ <isset property="netbeans.home"/>
+ <isset property="have.tests"/>
+ </and>
+ </condition>
+ <condition property="no.javadoc.preview">
+ <and>
+ <isset property="javadoc.preview"/>
+ <isfalse value="${javadoc.preview}"/>
+ </and>
+ </condition>
+ <property name="run.jvmargs" value=""/>
+ <property name="javac.compilerargs" value=""/>
+ <property name="work.dir" value="${basedir}"/>
+ <condition property="no.deps">
+ <and>
+ <istrue value="${no.dependencies}"/>
+ </and>
+ </condition>
+ <property name="javac.debug" value="true"/>
+ <property name="javadoc.preview" value="true"/>
+ <property name="application.args" value=""/>
+ <property name="source.encoding" value="${file.encoding}"/>
+ <condition property="javadoc.encoding.used" value="${javadoc.encoding}">
+ <and>
+ <isset property="javadoc.encoding"/>
+ <not>
+ <equals arg1="${javadoc.encoding}" arg2=""/>
+ </not>
+ </and>
+ </condition>
+ <property name="javadoc.encoding.used" value="${source.encoding}"/>
+ <property name="includes" value="**"/>
+ <property name="excludes" value=""/>
+ <property name="do.depend" value="false"/>
+ <condition property="do.depend.true">
+ <istrue value="${do.depend}"/>
+ </condition>
+ <condition else="" property="javac.compilerargs.jaxws" value="-Djava.endorsed.dirs='${jaxws.endorsed.dir}'">
+ <and>
+ <isset property="jaxws.endorsed.dir"/>
+ <available file="nbproject/jaxws-build.xml"/>
+ </and>
+ </condition>
+ </target>
+ <target name="-post-init">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">
+ <fail unless="src.src.dir">Must set src.src.dir</fail>
+ <fail unless="test.test.dir">Must set test.test.dir</fail>
+ <fail unless="build.dir">Must set build.dir</fail>
+ <fail unless="dist.dir">Must set dist.dir</fail>
+ <fail unless="build.classes.dir">Must set build.classes.dir</fail>
+ <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
+ <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
+ <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
+ <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
+ <fail unless="dist.jar">Must set dist.jar</fail>
+ </target>
+ <target name="-init-macrodef-property">
+ <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute name="name"/>
+ <attribute name="value"/>
+ <sequential>
+ <property name="@{name}" value="${@{value}}"/>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-javac">
+ <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${src.src.dir}" name="srcdir"/>
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <attribute default="${javac.classpath}" name="classpath"/>
+ <attribute default="${includes}" name="includes"/>
+ <attribute default="${excludes}" name="excludes"/>
+ <attribute default="${javac.debug}" name="debug"/>
+ <attribute default="" name="sourcepath"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" executable="${platform.javac}" fork="yes" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ <compilerarg line="${javac.compilerargs} ${javac.compilerargs.jaxws}"/>
+ <customize/>
+ </javac>
+ </sequential>
+ </macrodef>
+ <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${src.src.dir}" name="srcdir"/>
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <attribute default="${javac.classpath}" name="classpath"/>
+ <sequential>
+ <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ </depend>
+ </sequential>
+ </macrodef>
+ <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <sequential>
+ <fail unless="javac.includes">Must set javac.includes</fail>
+ <pathconvert pathsep="," property="javac.includes.binary">
+ <path>
+ <filelist dir="@{destdir}" files="${javac.includes}"/>
+ </path>
+ <globmapper from="*.java" to="*.class"/>
+ </pathconvert>
+ <delete>
+ <files includes="${javac.includes.binary}"/>
+ </delete>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-junit">
+ <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${includes}" name="includes"/>
+ <attribute default="${excludes}" name="excludes"/>
+ <attribute default="**" name="testincludes"/>
+ <sequential>
+ <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" jvm="${platform.java}" showoutput="true">
+ <batchtest todir="${build.test.results.dir}">
+ <fileset dir="${test.test.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">
+ <filename name="@{testincludes}"/>
+ </fileset>
+ </batchtest>
+ <classpath>
+ <path path="${run.test.classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="test-sys-prop."/>
+ <mapper from="test-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <formatter type="brief" usefile="false"/>
+ <formatter type="xml"/>
+ <jvmarg line="${run.jvmargs}"/>
+ </junit>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-nbjpda">
+ <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${main.class}" name="name"/>
+ <attribute default="${debug.classpath}" name="classpath"/>
+ <attribute default="" name="stopclassname"/>
+ <sequential>
+ <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="dt_socket">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ <bootclasspath>
+ <path path="${platform.bootcp}"/>
+ </bootclasspath>
+ </nbjpdastart>
+ </sequential>
+ </macrodef>
+ <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${build.classes.dir}" name="dir"/>
+ <sequential>
+ <nbjpdareload>
+ <fileset dir="@{dir}" includes="${fix.includes}*.class"/>
+ </nbjpdareload>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-debug-args">
+ <exec executable="${platform.java}" outputproperty="version-output">
+ <arg value="-version"/>
+ </exec>
+ <condition property="have-jdk-older-than-1.4">
+ <or>
+ <contains string="${version-output}" substring="java version "1.0"/>
+ <contains string="${version-output}" substring="java version "1.1"/>
+ <contains string="${version-output}" substring="java version "1.2"/>
+ <contains string="${version-output}" substring="java version "1.3"/>
+ </or>
+ </condition>
+ <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">
+ <istrue value="${have-jdk-older-than-1.4}"/>
+ </condition>
+ </target>
+ <target depends="-init-debug-args" name="-init-macrodef-debug">
+ <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${main.class}" name="classname"/>
+ <attribute default="${debug.classpath}" name="classpath"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <java classname="@{classname}" dir="${work.dir}" fork="true" jvm="${platform.java}">
+ <jvmarg line="${debug-args-line}"/>
+ <jvmarg value="-Xrunjdwp:transport=dt_socket,address=${jpda.address}"/>
+ <jvmarg line="${run.jvmargs}"/>
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="run-sys-prop."/>
+ <mapper from="run-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <customize/>
+ </java>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-java">
+ <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${main.class}" name="classname"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <java classname="@{classname}" dir="${work.dir}" fork="true" jvm="${platform.java}">
+ <jvmarg line="${run.jvmargs}"/>
+ <classpath>
+ <path path="${run.classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="run-sys-prop."/>
+ <mapper from="run-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <customize/>
+ </java>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-presetdef-jar">
+ <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <jar compress="${jar.compress}" jarfile="${dist.jar}">
+ <j2seproject1:fileset dir="${build.classes.dir}"/>
+ </jar>
+ </presetdef>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/>
+ <!--
+ ===================
+ COMPILATION SECTION
+ ===================
+ -->
+ <target depends="init" name="deps-jar" unless="no.deps"/>
+ <target depends="init,deps-jar" name="-pre-pre-compile">
+ <mkdir dir="${build.classes.dir}"/>
+ </target>
+ <target name="-pre-compile">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target if="do.depend.true" name="-compile-depend">
+ <j2seproject3:depend/>
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile">
+ <j2seproject3:javac/>
+ <copy todir="${build.classes.dir}">
+ <fileset dir="${src.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
+ </copy>
+ </target>
+ <target name="-post-compile">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>
+ <target name="-pre-compile-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">
+ <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
+ <j2seproject3:force-recompile/>
+ <j2seproject3:javac excludes="" includes="${javac.includes}" sourcepath="${src.src.dir}"/>
+ </target>
+ <target name="-post-compile-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>
+ <!--
+ ====================
+ JAR BUILDING SECTION
+ ====================
+ -->
+ <target depends="init" name="-pre-pre-jar">
+ <dirname file="${dist.jar}" property="dist.jar.dir"/>
+ <mkdir dir="${dist.jar.dir}"/>
+ </target>
+ <target name="-pre-jar">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available">
+ <j2seproject1:jar/>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class">
+ <j2seproject1:jar manifest="${manifest.file}"/>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">
+ <j2seproject1:jar manifest="${manifest.file}">
+ <j2seproject1:manifest>
+ <j2seproject1:attribute name="Main-Class" value="${main.class}"/>
+ </j2seproject1:manifest>
+ </j2seproject1:jar>
+ <echo>To run this application from the command line without Ant, try:</echo>
+ <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
+ <property location="${dist.jar}" name="dist.jar.resolved"/>
+ <pathconvert property="run.classpath.with.dist.jar">
<path path="${run.classpath}"/>
- </classpath>
- <syspropertyset>
- <propertyref prefix="run-sys-prop."/>
- <mapper type="glob" from="run-sys-prop.*" to="*"/>
- </syspropertyset>
- <customize/>
- </java>
- </sequential>
- </macrodef>
- </target>
- <target name="-init-presetdef-jar">
- <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
- <jar jarfile="${dist.jar}" compress="${jar.compress}">
- <j2seproject1:fileset dir="${build.classes.dir}"/>
- </jar>
- </presetdef>
- </target>
- <target name="init" depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar"/>
- <!--
- ===================
- COMPILATION SECTION
- ===================
- -->
- <target name="deps-jar" depends="init" unless="no.deps"/>
- <target name="-pre-pre-compile" depends="init,deps-jar">
- <mkdir dir="${build.classes.dir}"/>
- </target>
- <target name="-pre-compile">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-do-compile" depends="init,deps-jar,-pre-pre-compile,-pre-compile" if="have.sources">
- <j2seproject3:javac/>
- <copy todir="${build.classes.dir}">
- <fileset dir="${src.src.dir}" excludes="${build.classes.excludes}"/>
- </copy>
- </target>
- <target name="-post-compile">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="compile" depends="init,deps-jar,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project."/>
- <target name="-pre-compile-single">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-do-compile-single" depends="init,deps-jar,-pre-pre-compile">
- <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
- <j2seproject3:javac>
- <customize>
- <patternset includes="${javac.includes}"/>
- </customize>
- </j2seproject3:javac>
- </target>
- <target name="-post-compile-single">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="compile-single" depends="init,deps-jar,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single"/>
- <!--
- ====================
- JAR BUILDING SECTION
- ====================
- -->
- <target name="-pre-pre-jar" depends="init">
- <dirname property="dist.jar.dir" file="${dist.jar}"/>
- <mkdir dir="${dist.jar.dir}"/>
- </target>
- <target name="-pre-jar">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-do-jar-without-manifest" depends="init,compile,-pre-pre-jar,-pre-jar" unless="manifest.available">
- <j2seproject1:jar/>
- </target>
- <target name="-do-jar-with-manifest" depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" unless="manifest.available+main.class">
- <j2seproject1:jar manifest="${manifest.file}"/>
- </target>
- <target name="-do-jar-with-mainclass" depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" unless="manifest.available+main.class+mkdist.available">
- <j2seproject1:jar manifest="${manifest.file}">
- <j2seproject1:manifest>
- <j2seproject1:attribute name="Main-Class" value="${main.class}"/>
- </j2seproject1:manifest>
- </j2seproject1:jar>
- <echo>To run this application from the command line without Ant, try:</echo>
- <property name="build.classes.dir.resolved" location="${build.classes.dir}"/>
- <property name="dist.jar.resolved" location="${dist.jar}"/>
- <pathconvert property="run.classpath.with.dist.jar">
- <path path="${run.classpath}"/>
- <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
- </pathconvert>
- <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
- </target>
- <target name="-do-jar-with-libraries" depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available">
- <property name="build.classes.dir.resolved" location="${build.classes.dir}"/>
- <pathconvert property="run.classpath.without.build.classes.dir">
- <path path="${run.classpath}"/>
- <map from="${build.classes.dir.resolved}" to=""/>
- </pathconvert>
- <pathconvert property="jar.classpath" pathsep=" ">
- <path path="${run.classpath.without.build.classes.dir}"/>
- <chainedmapper>
- <flattenmapper/>
- <globmapper from="*" to="lib/*"/>
- </chainedmapper>
- </pathconvert>
- <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" name="copylibs" classpath="${libs.CopyLibs.classpath}"/>
- <copylibs manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}" jarfile="${dist.jar}" compress="${jar.compress}">
- <fileset dir="${build.classes.dir}"/>
- <manifest>
- <attribute name="Main-Class" value="${main.class}"/>
- <attribute name="Class-Path" value="${jar.classpath}"/>
- </manifest>
- </copylibs>
- <echo>To run this application from the command line without Ant, try:</echo>
- <property name="dist.jar.resolved" location="${dist.jar}"/>
- <echo>java -jar "${dist.jar.resolved}"</echo>
- </target>
- <target name="-post-jar">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="jar" depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR."/>
- <!--
- =================
- EXECUTION SECTION
- =================
- -->
- <target name="run" depends="init,compile" description="Run a main class.">
- <j2seproject1:java>
- <customize>
- <arg line="${application.args}"/>
- </customize>
- </j2seproject1:java>
- </target>
- <target name="run-single" depends="init,compile-single">
- <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
- <j2seproject1:java classname="${run.class}"/>
- </target>
- <!--
- =================
- DEBUGGING SECTION
- =================
- -->
- <target name="-debug-start-debugger" if="netbeans.home" depends="init">
- <j2seproject1:nbjpdastart name="${debug.class}"/>
- </target>
- <target name="-debug-start-debuggee" depends="init,compile">
- <j2seproject3:debug>
- <customize>
- <arg line="${application.args}"/>
- </customize>
- </j2seproject3:debug>
- </target>
- <target name="debug" if="netbeans.home" depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE."/>
- <target name="-debug-start-debugger-stepinto" if="netbeans.home" depends="init">
- <j2seproject1:nbjpdastart stopclassname="${main.class}"/>
- </target>
- <target name="debug-stepinto" if="netbeans.home" depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee"/>
- <target name="-debug-start-debuggee-single" if="netbeans.home" depends="init,compile-single">
- <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
- <j2seproject3:debug classname="${debug.class}"/>
- </target>
- <target name="debug-single" if="netbeans.home" depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single"/>
- <target name="-pre-debug-fix" depends="init">
- <fail unless="fix.includes">Must set fix.includes</fail>
- <property name="javac.includes" value="${fix.includes}.java"/>
- </target>
- <target name="-do-debug-fix" if="netbeans.home" depends="init,-pre-debug-fix,compile-single">
- <j2seproject1:nbjpdareload/>
- </target>
- <target name="debug-fix" if="netbeans.home" depends="init,-pre-debug-fix,-do-debug-fix"/>
- <!--
- ===============
- JAVADOC SECTION
- ===============
- -->
- <target name="-javadoc-build" depends="init">
- <mkdir dir="${dist.javadoc.dir}"/>
- <javadoc destdir="${dist.javadoc.dir}" source="${javac.source}" notree="${javadoc.notree}" use="${javadoc.use}" nonavbar="${javadoc.nonavbar}" noindex="${javadoc.noindex}" splitindex="${javadoc.splitindex}" author="${javadoc.author}" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}" private="${javadoc.private}" additionalparam="${javadoc.additionalparam}" failonerror="true" useexternalfile="true">
- <classpath>
- <path path="${javac.classpath}"/>
- </classpath>
- <sourcepath>
- <pathelement location="${src.src.dir}"/>
- </sourcepath>
- <packageset dir="${src.src.dir}" includes="*/**"/>
- <fileset dir="${src.src.dir}" includes="*.java"/>
- </javadoc>
- </target>
- <target name="-javadoc-browse" if="netbeans.home" unless="no.javadoc.preview" depends="init,-javadoc-build">
- <nbbrowse file="${dist.javadoc.dir}/index.html"/>
- </target>
- <target name="javadoc" depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc."/>
- <!--
- =========================
- JUNIT COMPILATION SECTION
- =========================
- -->
- <target name="-pre-pre-compile-test" if="have.tests" depends="init,compile">
- <mkdir dir="${build.test.classes.dir}"/>
- </target>
- <target name="-pre-compile-test">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-do-compile-test" if="have.tests" depends="init,compile,-pre-pre-compile-test,-pre-compile-test">
- <j2seproject3:javac srcdir="${test.test.dir}" destdir="${build.test.classes.dir}" debug="true" classpath="${javac.test.classpath}"/>
- <copy todir="${build.test.classes.dir}">
- <fileset dir="${test.test.dir}" excludes="**/*.java"/>
- </copy>
- </target>
- <target name="-post-compile-test">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="compile-test" depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test"/>
- <target name="-pre-compile-test-single">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="-do-compile-test-single" if="have.tests" depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single">
- <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
- <j2seproject3:javac srcdir="${test.test.dir}" destdir="${build.test.classes.dir}" debug="true" classpath="${javac.test.classpath}">
- <customize>
- <patternset includes="${javac.includes}"/>
- </customize>
- </j2seproject3:javac>
- <copy todir="${build.test.classes.dir}">
- <fileset dir="${test.test.dir}" excludes="**/*.java"/>
- </copy>
- </target>
- <target name="-post-compile-test-single">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="compile-test-single" depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single"/>
- <!--
- =======================
- JUNIT EXECUTION SECTION
- =======================
- -->
- <target name="-pre-test-run" if="have.tests" depends="init">
- <mkdir dir="${build.test.results.dir}"/>
- </target>
- <target name="-do-test-run" if="have.tests" depends="init,compile-test,-pre-test-run">
- <j2seproject3:junit/>
- </target>
- <target name="-post-test-run" if="have.tests" depends="init,compile-test,-pre-test-run,-do-test-run">
- <fail if="tests.failed">Some tests failed; see details above.</fail>
- </target>
- <target name="test-report" if="have.tests" depends="init"/>
- <target name="-test-browse" if="netbeans.home+have.tests" depends="init"/>
- <target name="test" depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests."/>
- <target name="-pre-test-run-single" if="have.tests" depends="init">
- <mkdir dir="${build.test.results.dir}"/>
- </target>
- <target name="-do-test-run-single" if="have.tests" depends="init,compile-test-single,-pre-test-run-single">
- <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
- <j2seproject3:junit includes="${test.includes}"/>
- </target>
- <target name="-post-test-run-single" if="have.tests" depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single">
- <fail if="tests.failed">Some tests failed; see details above.</fail>
- </target>
- <target name="test-single" depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test."/>
- <!--
- =======================
- JUNIT DEBUGGING SECTION
- =======================
- -->
- <target name="-debug-start-debuggee-test" if="have.tests" depends="init,compile-test">
- <fail unless="test.class">Must select one file in the IDE or set test.class</fail>
- <j2seproject3:debug classname="junit.textui.TestRunner" classpath="${debug.test.classpath}">
- <customize>
- <arg line="${test.class}"/>
- </customize>
- </j2seproject3:debug>
- </target>
- <target name="-debug-start-debugger-test" if="netbeans.home+have.tests" depends="init,compile-test">
- <j2seproject1:nbjpdastart name="${test.class}" classpath="${debug.test.classpath}"/>
- </target>
- <target name="debug-test" depends="init,compile-test,-debug-start-debugger-test,-debug-start-debuggee-test"/>
- <target name="-do-debug-fix-test" if="netbeans.home" depends="init,-pre-debug-fix,compile-test-single">
- <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
- </target>
- <target name="debug-fix-test" if="netbeans.home" depends="init,-pre-debug-fix,-do-debug-fix-test"/>
- <!--
- =========================
- APPLET EXECUTION SECTION
- =========================
- -->
- <target name="run-applet" depends="init,compile-single">
- <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
- <j2seproject1:java classname="sun.applet.AppletViewer">
- <customize>
- <arg value="${applet.url}"/>
- </customize>
- </j2seproject1:java>
- </target>
- <!--
- =========================
- APPLET DEBUGGING SECTION
- =========================
- -->
- <target name="-debug-start-debuggee-applet" if="netbeans.home" depends="init,compile-single">
- <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
- <j2seproject3:debug classname="sun.applet.AppletViewer">
- <customize>
- <arg value="${applet.url}"/>
- </customize>
- </j2seproject3:debug>
- </target>
- <target name="debug-applet" if="netbeans.home" depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet"/>
- <!--
- ===============
- CLEANUP SECTION
- ===============
- -->
- <target name="deps-clean" depends="init" unless="no.deps"/>
- <target name="-do-clean" depends="init">
- <delete dir="${build.dir}"/>
- <delete dir="${dist.dir}"/>
- </target>
- <target name="-post-clean">
- <!-- Empty placeholder for easier customization. -->
- <!-- You can override this target in the ../build.xml file. -->
- </target>
- <target name="clean" depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products."/>
+ <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
+ </pathconvert>
+ <echo>${platform.java} -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries">
+ <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
+ <pathconvert property="run.classpath.without.build.classes.dir">
+ <path path="${run.classpath}"/>
+ <map from="${build.classes.dir.resolved}" to=""/>
+ </pathconvert>
+ <pathconvert pathsep=" " property="jar.classpath">
+ <path path="${run.classpath.without.build.classes.dir}"/>
+ <chainedmapper>
+ <flattenmapper/>
+ <globmapper from="*" to="lib/*"/>
+ </chainedmapper>
+ </pathconvert>
+ <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>
+ <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">
+ <fileset dir="${build.classes.dir}"/>
+ <manifest>
+ <attribute name="Main-Class" value="${main.class}"/>
+ <attribute name="Class-Path" value="${jar.classpath}"/>
+ </manifest>
+ </copylibs>
+ <echo>To run this application from the command line without Ant, try:</echo>
+ <property location="${dist.jar}" name="dist.jar.resolved"/>
+ <echo>${platform.java} -jar "${dist.jar.resolved}"</echo>
+ </target>
+ <target name="-post-jar">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>
+ <!--
+ =================
+ EXECUTION SECTION
+ =================
+ -->
+ <target depends="init,compile" description="Run a main class." name="run">
+ <j2seproject1:java>
+ <customize>
+ <arg line="${application.args}"/>
+ </customize>
+ </j2seproject1:java>
+ </target>
+ <target name="-do-not-recompile">
+ <property name="javac.includes.binary" value=""/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-single" name="run-single">
+ <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
+ <j2seproject1:java classname="${run.class}"/>
+ </target>
+ <!--
+ =================
+ DEBUGGING SECTION
+ =================
+ -->
+ <target depends="init" if="netbeans.home" name="-debug-start-debugger">
+ <j2seproject1:nbjpdastart name="${debug.class}"/>
+ </target>
+ <target depends="init,compile" name="-debug-start-debuggee">
+ <j2seproject3:debug>
+ <customize>
+ <arg line="${application.args}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>
+ <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">
+ <j2seproject1:nbjpdastart stopclassname="${main.class}"/>
+ </target>
+ <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>
+ <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">
+ <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
+ <j2seproject3:debug classname="${debug.class}"/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>
+ <target depends="init" name="-pre-debug-fix">
+ <fail unless="fix.includes">Must set fix.includes</fail>
+ <property name="javac.includes" value="${fix.includes}.java"/>
+ </target>
+ <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">
+ <j2seproject1:nbjpdareload/>
+ </target>
+ <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>
+ <!--
+ ===============
+ JAVADOC SECTION
+ ===============
+ -->
+ <target depends="init" name="-javadoc-build">
+ <mkdir dir="${dist.javadoc.dir}"/>
+ <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" executable="${platform.javadoc}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">
+ <classpath>
+ <path path="${javac.classpath}"/>
+ </classpath>
+ <fileset dir="${src.src.dir}" excludes="${excludes}" includes="${includes}">
+ <filename name="**/*.java"/>
+ </fileset>
+ </javadoc>
+ </target>
+ <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">
+ <nbbrowse file="${dist.javadoc.dir}/index.html"/>
+ </target>
+ <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>
+ <!--
+ =========================
+ JUNIT COMPILATION SECTION
+ =========================
+ -->
+ <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">
+ <mkdir dir="${build.test.classes.dir}"/>
+ </target>
+ <target name="-pre-compile-test">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target if="do.depend.true" name="-compile-test-depend">
+ <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.test.dir}"/>
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">
+ <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.test.dir}"/>
+ <copy todir="${build.test.classes.dir}">
+ <fileset dir="${test.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
+ </copy>
+ </target>
+ <target name="-post-compile-test">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>
+ <target name="-pre-compile-test-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">
+ <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
+ <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>
+ <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="${test.test.dir}" srcdir="${test.test.dir}"/>
+ <copy todir="${build.test.classes.dir}">
+ <fileset dir="${test.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
+ </copy>
+ </target>
+ <target name="-post-compile-test-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>
+ <!--
+ =======================
+ JUNIT EXECUTION SECTION
+ =======================
+ -->
+ <target depends="init" if="have.tests" name="-pre-test-run">
+ <mkdir dir="${build.test.results.dir}"/>
+ </target>
+ <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">
+ <j2seproject3:junit testincludes="**/*Test.java"/>
+ </target>
+ <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">
+ <fail if="tests.failed">Some tests failed; see details above.</fail>
+ </target>
+ <target depends="init" if="have.tests" name="test-report"/>
+ <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>
+ <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>
+ <target depends="init" if="have.tests" name="-pre-test-run-single">
+ <mkdir dir="${build.test.results.dir}"/>
+ </target>
+ <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">
+ <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
+ <j2seproject3:junit excludes="" includes="${test.includes}"/>
+ </target>
+ <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">
+ <fail if="tests.failed">Some tests failed; see details above.</fail>
+ </target>
+ <target depends="init,-do-not-recompile,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>
+ <!--
+ =======================
+ JUNIT DEBUGGING SECTION
+ =======================
+ -->
+ <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">
+ <fail unless="test.class">Must select one file in the IDE or set test.class</fail>
+ <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>
+ <delete file="${test.report.file}"/>
+ <mkdir dir="${build.test.results.dir}"/>
+ <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">
+ <customize>
+ <syspropertyset>
+ <propertyref prefix="test-sys-prop."/>
+ <mapper from="test-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <arg value="${test.class}"/>
+ <arg value="showoutput=true"/>
+ <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
+ <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">
+ <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>
+ <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">
+ <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
+ </target>
+ <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>
+ <!--
+ =========================
+ APPLET EXECUTION SECTION
+ =========================
+ -->
+ <target depends="init,compile-single" name="run-applet">
+ <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
+ <j2seproject1:java classname="sun.applet.AppletViewer">
+ <customize>
+ <arg value="${applet.url}"/>
+ </customize>
+ </j2seproject1:java>
+ </target>
+ <!--
+ =========================
+ APPLET DEBUGGING SECTION
+ =========================
+ -->
+ <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">
+ <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
+ <j2seproject3:debug classname="sun.applet.AppletViewer">
+ <customize>
+ <arg value="${applet.url}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>
+ <!--
+ ===============
+ CLEANUP SECTION
+ ===============
+ -->
+ <target depends="init" name="deps-clean" unless="no.deps"/>
+ <target depends="init" name="-do-clean">
+ <delete dir="${build.dir}"/>
+ <delete dir="${dist.dir}"/>
+ </target>
+ <target name="-post-clean">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>
</project>
OSDN Git Service
