2 // by Edd Dumbill (C) 1999-2002
\r
3 // <edd@usefulinc.com>
\r
4 // $Original: xmlrpcs.inc,v 1.66 2006/09/17 21:25:06 ggiunta Exp $
\r
5 // $Id: xmlrpcs.inc.php 1539 2011-06-23 10:40:01Z sakamocchi $
\r
7 // Copyright (c) 1999,2000,2002 Edd Dumbill.
\r
8 // All rights reserved.
\r
10 // Redistribution and use in source and binary forms, with or without
\r
11 // modification, are permitted provided that the following conditions
\r
14 // * Redistributions of source code must retain the above copyright
\r
15 // notice, this list of conditions and the following disclaimer.
\r
17 // * Redistributions in binary form must reproduce the above
\r
18 // copyright notice, this list of conditions and the following
\r
19 // disclaimer in the documentation and/or other materials provided
\r
20 // with the distribution.
\r
22 // * Neither the name of the "XML-RPC for PHP" nor the names of its
\r
23 // contributors may be used to endorse or promote products derived
\r
24 // from this software without specific prior written permission.
\r
26 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
\r
27 // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
\r
28 // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
\r
29 // FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
\r
30 // REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
\r
31 // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
\r
32 // (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
\r
33 // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
\r
34 // HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
\r
35 // STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
\r
36 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
\r
37 // OF THE POSSIBILITY OF SUCH DAMAGE.
\r
39 // XML RPC Server class
\r
40 // requires: xmlrpc.inc
\r
42 $GLOBALS['xmlrpcs_capabilities'] = array(
\r
43 // xmlrpc spec: always supported
\r
44 'xmlrpc' => new xmlrpcval(array(
\r
45 'specUrl' => new xmlrpcval('http://www.xmlrpc.com/spec', 'string'),
\r
46 'specVersion' => new xmlrpcval(1, 'int')
\r
48 // if we support system.xxx functions, we always support multicall, too...
\r
49 // Note that, as of 2006/09/17, the following URL does not respond anymore
\r
50 'system.multicall' => new xmlrpcval(array(
\r
51 'specUrl' => new xmlrpcval('http://www.xmlrpc.com/discuss/msgReader$1208', 'string'),
\r
52 'specVersion' => new xmlrpcval(1, 'int')
\r
54 // introspection: version 2! we support 'mixed', too
\r
55 'introspection' => new xmlrpcval(array(
\r
56 'specUrl' => new xmlrpcval('http://phpxmlrpc.sourceforge.net/doc-2/ch10.html', 'string'),
\r
57 'specVersion' => new xmlrpcval(2, 'int')
\r
61 /* Functions that implement system.XXX methods of xmlrpc servers */
\r
62 $_xmlrpcs_getCapabilities_sig=array(array($GLOBALS['xmlrpcStruct']));
\r
63 $_xmlrpcs_getCapabilities_doc='This method lists all the capabilites that the XML-RPC server has: the (more or less standard) extensions to the xmlrpc spec that it adheres to';
\r
64 $_xmlrpcs_getCapabilities_sdoc=array(array('list of capabilities, described as structs with a version number and url for the spec'));
\r
65 function _xmlrpcs_getCapabilities($server, $m=null)
\r
67 $outAr = $GLOBALS['xmlrpcs_capabilities'];
\r
69 if ($GLOBALS['xmlrpc_null_extension']) {
\r
70 $outAr['nil'] = new xmlrpcval(array(
\r
71 'specUrl' => new xmlrpcval('http://www.ontosys.com/xml-rpc/extensions.php', 'string'),
\r
72 'specVersion' => new xmlrpcval(1, 'int')
\r
75 return new xmlrpcresp(new xmlrpcval($outAr, 'struct'));
\r
78 // listMethods: signature was either a string, or nothing.
\r
79 // The useless string variant has been removed
\r
80 $_xmlrpcs_listMethods_sig=array(array($GLOBALS['xmlrpcArray']));
\r
81 $_xmlrpcs_listMethods_doc='This method lists all the methods that the XML-RPC server knows how to dispatch';
\r
82 $_xmlrpcs_listMethods_sdoc=array(array('list of method names'));
\r
83 function _xmlrpcs_listMethods($server, $m=null) // if called in plain php values mode, second param is missing
\r
87 foreach($server->dmap as $key => $val)
\r
89 $outAr[] = new xmlrpcval($key, 'string');
\r
91 if($server->allow_system_funcs)
\r
93 foreach($GLOBALS['_xmlrpcs_dmap'] as $key => $val)
\r
95 $outAr[] = new xmlrpcval($key, 'string');
\r
98 return new xmlrpcresp(new xmlrpcval($outAr, 'array'));
\r
101 $_xmlrpcs_methodSignature_sig=array(array($GLOBALS['xmlrpcArray'], $GLOBALS['xmlrpcString']));
\r
102 $_xmlrpcs_methodSignature_doc='Returns an array of known signatures (an array of arrays) for the method name passed. If no signatures are known, returns a none-array (test for type != array to detect missing signature)';
\r
103 $_xmlrpcs_methodSignature_sdoc=array(array('list of known signatures, each sig being an array of xmlrpc type names', 'name of method to be described'));
\r
104 function _xmlrpcs_methodSignature($server, $m)
\r
106 // let accept as parameter both an xmlrpcval or string
\r
109 $methName=$m->getParam(0);
\r
110 $methName=$methName->scalarval();
\r
116 if(i18n::strpos($methName, "system.") === 0)
\r
118 $dmap=$GLOBALS['_xmlrpcs_dmap']; $sysCall=1;
\r
122 $dmap=$server->dmap; $sysCall=0;
\r
124 if(isset($dmap[$methName]))
\r
126 if(isset($dmap[$methName]['signature']))
\r
129 foreach($dmap[$methName]['signature'] as $inSig)
\r
132 foreach($inSig as $sig)
\r
134 $cursig[]= new xmlrpcval($sig, 'string');
\r
136 $sigs[] = new xmlrpcval($cursig, 'array');
\r
138 $r= new xmlrpcresp(new xmlrpcval($sigs, 'array'));
\r
142 // NB: according to the official docs, we should be returning a
\r
143 // "none-array" here, which means not-an-array
\r
144 $r = new xmlrpcresp(new xmlrpcval('undef', 'string'));
\r
149 $r = new xmlrpcresp(0,$GLOBALS['xmlrpcerr']['introspect_unknown'], $GLOBALS['xmlrpcstr']['introspect_unknown']);
\r
154 $_xmlrpcs_methodHelp_sig=array(array($GLOBALS['xmlrpcString'], $GLOBALS['xmlrpcString']));
\r
155 $_xmlrpcs_methodHelp_doc='Returns help text if defined for the method passed, otherwise returns an empty string';
\r
156 $_xmlrpcs_methodHelp_sdoc=array(array('method description', 'name of the method to be described'));
\r
157 function _xmlrpcs_methodHelp($server, $m)
\r
159 // let accept as parameter both an xmlrpcval or string
\r
162 $methName=$m->getParam(0);
\r
163 $methName=$methName->scalarval();
\r
169 if(i18n::strpos($methName, "system.") === 0)
\r
171 $dmap=$GLOBALS['_xmlrpcs_dmap']; $sysCall=1;
\r
175 $dmap=$server->dmap; $sysCall=0;
\r
177 if(isset($dmap[$methName]))
\r
179 if(isset($dmap[$methName]['docstring']))
\r
181 $r = new xmlrpcresp(new xmlrpcval($dmap[$methName]['docstring']), 'string');
\r
185 $r = new xmlrpcresp(new xmlrpcval('', 'string'));
\r
190 $r = new xmlrpcresp(0, $GLOBALS['xmlrpcerr']['introspect_unknown'], $GLOBALS['xmlrpcstr']['introspect_unknown']);
\r
195 $_xmlrpcs_multicall_sig = array(array($GLOBALS['xmlrpcArray'], $GLOBALS['xmlrpcArray']));
\r
196 $_xmlrpcs_multicall_doc = 'Boxcar multiple RPC calls in one request. See http://www.xmlrpc.com/discuss/msgReader$1208 for details';
\r
197 $_xmlrpcs_multicall_sdoc = array(array('list of response structs, where each struct has the usual members', 'list of calls, with each call being represented as a struct, with members "methodname" and "params"'));
\r
198 function _xmlrpcs_multicall_error($err)
\r
200 if(is_string($err))
\r
202 $str = $GLOBALS['xmlrpcstr']["multicall_${err}"];
\r
203 $code = $GLOBALS['xmlrpcerr']["multicall_${err}"];
\r
207 $code = $err->faultCode();
\r
208 $str = $err->faultString();
\r
211 $struct['faultCode'] = new xmlrpcval($code, 'int');
\r
212 $struct['faultString'] = new xmlrpcval($str, 'string');
\r
213 return new xmlrpcval($struct, 'struct');
\r
216 function _xmlrpcs_multicall_do_call($server, $call)
\r
218 if($call->kindOf() != 'struct')
\r
220 return _xmlrpcs_multicall_error('notstruct');
\r
222 $methName = @$call->structmem('methodName');
\r
225 return _xmlrpcs_multicall_error('nomethod');
\r
227 if($methName->kindOf() != 'scalar' || $methName->scalartyp() != 'string')
\r
229 return _xmlrpcs_multicall_error('notstring');
\r
231 if($methName->scalarval() == 'system.multicall')
\r
233 return _xmlrpcs_multicall_error('recursion');
\r
236 $params = @$call->structmem('params');
\r
239 return _xmlrpcs_multicall_error('noparams');
\r
241 if($params->kindOf() != 'array')
\r
243 return _xmlrpcs_multicall_error('notarray');
\r
245 $numParams = $params->arraysize();
\r
247 $msg = new xmlrpcmsg($methName->scalarval());
\r
248 for($i = 0; $i < $numParams; $i++)
\r
250 if(!$msg->addParam($params->arraymem($i)))
\r
253 return _xmlrpcs_multicall_error(new xmlrpcresp(0,
\r
254 $GLOBALS['xmlrpcerr']['incorrect_params'],
\r
255 $GLOBALS['xmlrpcstr']['incorrect_params'] . ": probable xml error in param " . $i));
\r
259 $result = $server->execute($msg);
\r
261 if($result->faultCode() != 0)
\r
263 return _xmlrpcs_multicall_error($result); // Method returned fault.
\r
266 return new xmlrpcval(array($result->value()), 'array');
\r
269 function _xmlrpcs_multicall_do_call_phpvals($server, $call)
\r
271 if(!is_array($call))
\r
273 return _xmlrpcs_multicall_error('notstruct');
\r
275 if(!array_key_exists('methodName', $call))
\r
277 return _xmlrpcs_multicall_error('nomethod');
\r
279 if (!is_string($call['methodName']))
\r
281 return _xmlrpcs_multicall_error('notstring');
\r
283 if($call['methodName'] == 'system.multicall')
\r
285 return _xmlrpcs_multicall_error('recursion');
\r
287 if(!array_key_exists('params', $call))
\r
289 return _xmlrpcs_multicall_error('noparams');
\r
291 if(!is_array($call['params']))
\r
293 return _xmlrpcs_multicall_error('notarray');
\r
296 // this is a real dirty and simplistic hack, since we might have received a
\r
297 // base64 or datetime values, but they will be listed as strings here...
\r
298 $numParams = count($call['params']);
\r
300 foreach($call['params'] as $val)
\r
301 $pt[] = php_2_xmlrpc_type(gettype($val));
\r
303 $result = $server->execute($call['methodName'], $call['params'], $pt);
\r
305 if($result->faultCode() != 0)
\r
307 return _xmlrpcs_multicall_error($result); // Method returned fault.
\r
310 return new xmlrpcval(array($result->value()), 'array');
\r
313 function _xmlrpcs_multicall($server, $m)
\r
316 // let accept a plain list of php parameters, beside a single xmlrpc msg object
\r
319 $calls = $m->getParam(0);
\r
320 $numCalls = $calls->arraysize();
\r
321 for($i = 0; $i < $numCalls; $i++)
\r
323 $call = $calls->arraymem($i);
\r
324 $result[$i] = _xmlrpcs_multicall_do_call($server, $call);
\r
329 $numCalls=count($m);
\r
330 for($i = 0; $i < $numCalls; $i++)
\r
332 $result[$i] = _xmlrpcs_multicall_do_call_phpvals($server, $m[$i]);
\r
336 return new xmlrpcresp(new xmlrpcval($result, 'array'));
\r
339 $GLOBALS['_xmlrpcs_dmap']=array(
\r
340 'system.listMethods' => array(
\r
341 'function' => '_xmlrpcs_listMethods',
\r
342 'signature' => $_xmlrpcs_listMethods_sig,
\r
343 'docstring' => $_xmlrpcs_listMethods_doc,
\r
344 'signature_docs' => $_xmlrpcs_listMethods_sdoc),
\r
345 'system.methodHelp' => array(
\r
346 'function' => '_xmlrpcs_methodHelp',
\r
347 'signature' => $_xmlrpcs_methodHelp_sig,
\r
348 'docstring' => $_xmlrpcs_methodHelp_doc,
\r
349 'signature_docs' => $_xmlrpcs_methodHelp_sdoc),
\r
350 'system.methodSignature' => array(
\r
351 'function' => '_xmlrpcs_methodSignature',
\r
352 'signature' => $_xmlrpcs_methodSignature_sig,
\r
353 'docstring' => $_xmlrpcs_methodSignature_doc,
\r
354 'signature_docs' => $_xmlrpcs_methodSignature_sdoc),
\r
355 'system.multicall' => array(
\r
356 'function' => '_xmlrpcs_multicall',
\r
357 'signature' => $_xmlrpcs_multicall_sig,
\r
358 'docstring' => $_xmlrpcs_multicall_doc,
\r
359 'signature_docs' => $_xmlrpcs_multicall_sdoc),
\r
360 'system.getCapabilities' => array(
\r
361 'function' => '_xmlrpcs_getCapabilities',
\r
362 'signature' => $_xmlrpcs_getCapabilities_sig,
\r
363 'docstring' => $_xmlrpcs_getCapabilities_doc,
\r
364 'signature_docs' => $_xmlrpcs_getCapabilities_sdoc)
\r
367 $GLOBALS['_xmlrpcs_occurred_errors'] = '';
\r
368 $GLOBALS['_xmlrpcs_prev_ehandler'] = '';
\r
370 * Error handler used to track errors that occur during server-side execution of PHP code.
\r
371 * This allows to report back to the client whether an internal error has occurred or not
\r
372 * using an xmlrpc response object, instead of letting the client deal with the html junk
\r
373 * that a PHP execution error on the server generally entails.
\r
375 * NB: in fact a user defined error handler can only handle WARNING, NOTICE and USER_* errors.
\r
378 function _xmlrpcs_errorHandler($errcode, $errstring, $filename=null, $lineno=null, $context=null)
\r
380 // obey the @ protocol
\r
381 if (error_reporting() == 0)
\r
384 //if($errcode != E_NOTICE && $errcode != E_WARNING && $errcode != E_USER_NOTICE && $errcode != E_USER_WARNING)
\r
385 if($errcode != 2048) // do not use E_STRICT by name, since on PHP 4 it will not be defined
\r
387 $GLOBALS['_xmlrpcs_occurred_errors'] = $GLOBALS['_xmlrpcs_occurred_errors'] . $errstring . "\n";
\r
389 // Try to avoid as much as possible disruption to the previous error handling
\r
390 // mechanism in place
\r
391 if($GLOBALS['_xmlrpcs_prev_ehandler'] == '')
\r
393 // The previous error handler was the default: all we should do is log error
\r
394 // to the default error log (if level high enough)
\r
395 if(ini_get('log_errors') && (intval(ini_get('error_reporting')) & $errcode))
\r
397 error_log($errstring);
\r
402 // Pass control on to previous error handler, trying to avoid loops...
\r
403 if($GLOBALS['_xmlrpcs_prev_ehandler'] != '_xmlrpcs_errorHandler')
\r
405 // NB: this code will NOT work on php < 4.0.2: only 2 params were used for error handlers
\r
406 if(is_array($GLOBALS['_xmlrpcs_prev_ehandler']))
\r
408 $GLOBALS['_xmlrpcs_prev_ehandler'][0]->$GLOBALS['_xmlrpcs_prev_ehandler'][1]($errcode, $errstring, $filename, $lineno, $context);
\r
412 $GLOBALS['_xmlrpcs_prev_ehandler']($errcode, $errstring, $filename, $lineno, $context);
\r
418 $GLOBALS['_xmlrpc_debuginfo']='';
\r
421 * Add a string to the debug info that can be later seralized by the server
\r
422 * as part of the response message.
\r
423 * Note that for best compatbility, the debug string should be encoded using
\r
424 * the $GLOBALS['xmlrpc_internalencoding'] character set.
\r
428 function xmlrpc_debugmsg($m)
\r
430 $GLOBALS['_xmlrpc_debuginfo'] .= $m . "\n";
\r
433 class xmlrpc_server
\r
435 /// array defining php functions exposed as xmlrpc methods by this server
\r
438 * Defines how functions in dmap will be invokde: either using an xmlrpc msg object
\r
439 * or plain php values.
\r
440 * valid strings are 'xmlrpcvals', 'phpvals' or 'epivals'
\r
442 var $functions_parameters_type='xmlrpcvals';
\r
443 /// controls wether the server is going to echo debugging messages back to the client as comments in response body. valid values: 0,1,2,3
\r
446 * When set to true, it will enable HTTP compression of the response, in case
\r
447 * the client has declared its support for compression in the request.
\r
449 var $compress_response = false;
\r
451 * List of http compression methods accepted by the server for requests.
\r
452 * NB: PHP supports deflate, gzip compressions out of the box if compiled w. zlib
\r
454 var $accepted_compression = array();
\r
455 /// shall we serve calls to system.* methods?
\r
456 var $allow_system_funcs = true;
\r
457 /// list of charset encodings natively accepted for requests
\r
458 var $accepted_charset_encodings = array();
\r
460 * charset encoding to be used for response.
\r
461 * NB: if we can, we will convert the generated response from internal_encoding to the intended one.
\r
462 * can be: a supported xml encoding (only UTF-8 and ISO-8859-1 at present, unless mbstring is enabled),
\r
463 * null (leave unspecified in response, convert output stream to US_ASCII),
\r
464 * 'default' (use xmlrpc library default as specified in xmlrpc.inc, convert output stream if needed),
\r
465 * or 'auto' (use client-specified charset encoding or same as request if request headers do not specify it (unless request is US-ASCII: then use library default anyway).
\r
466 * NB: pretty dangerous if you accept every charset and do not have mbstring enabled)
\r
468 var $response_charset_encoding = '';
\r
469 /// storage for internal debug info
\r
470 var $debug_info = '';
\r
471 /// extra data passed at runtime to method handling functions. Used only by EPI layer
\r
472 var $user_data = null;
\r
475 * @param array $dispmap the dispatch map withd efinition of exposed services
\r
476 * @param boolean $servicenow set to false to prevent the server from runnung upon construction
\r
478 function xmlrpc_server($dispMap=null, $serviceNow=true)
\r
480 // if ZLIB is enabled, let the server by default accept compressed requests,
\r
481 // and compress responses sent to clients that support them
\r
482 if(function_exists('gzinflate'))
\r
484 $this->accepted_compression = array('gzip', 'deflate');
\r
485 $this->compress_response = true;
\r
488 // by default the xml parser can support these 3 charset encodings
\r
489 $this->accepted_charset_encodings = array('UTF-8', 'ISO-8859-1', 'US-ASCII');
\r
491 // dispMap is a dispatch array of methods
\r
492 // mapped to function names and signatures
\r
494 // doesn't appear in the map then an unknown
\r
495 // method error is generated
\r
496 /* milosch - changed to make passing dispMap optional.
\r
497 * instead, you can use the class add_to_map() function
\r
498 * to add functions manually (borrowed from SOAPX4)
\r
502 $this->dmap = $dispMap;
\r
511 * Set debug level of server.
\r
512 * @param integer $in debug lvl: determines info added to xmlrpc responses (as xml comments)
\r
513 * 0 = no debug info,
\r
514 * 1 = msgs set from user with debugmsg(),
\r
515 * 2 = add complete xmlrpc request (headers and body),
\r
516 * 3 = add also all processing warnings happened during method processing
\r
517 * (NB: this involves setting a custom error handler, and might interfere
\r
518 * with the standard processing of the php function exposed as method. In
\r
519 * particular, triggering an USER_ERROR level error will not halt script
\r
520 * execution anymore, but just end up logged in the xmlrpc response)
\r
521 * Note that info added at elevel 2 and 3 will be base64 encoded
\r
524 function setDebug($in)
\r
530 * Return a string with the serialized representation of all debug info
\r
531 * @param string $charset_encoding the target charset encoding for the serialization
\r
532 * @return string an XML comment (or two)
\r
534 function serializeDebug($charset_encoding='')
\r
536 // Tough encoding problem: which internal charset should we assume for debug info?
\r
537 // It might contain a copy of raw data received from client, ie with unknown encoding,
\r
538 // intermixed with php generated data and user generated data...
\r
539 // so we split it: system debug is base 64 encoded,
\r
540 // user debug info should be encoded by the end user using the INTERNAL_ENCODING
\r
542 if ($this->debug_info != '')
\r
544 $out .= "<!-- SERVER DEBUG INFO (BASE64 ENCODED):\n".base64_encode($this->debug_info)."\n-->\n";
\r
546 if($GLOBALS['_xmlrpc_debuginfo']!='')
\r
549 $out .= "<!-- DEBUG INFO:\n" . xmlrpc_encode_entitites(str_replace('--', '_-', $GLOBALS['_xmlrpc_debuginfo']), $GLOBALS['xmlrpc_internalencoding'], $charset_encoding) . "\n-->\n";
\r
550 // NB: a better solution MIGHT be to use CDATA, but we need to insert it
\r
551 // into return payload AFTER the beginning tag
\r
552 //$out .= "<![CDATA[ DEBUG INFO:\n\n" . str_replace(']]>', ']_]_>', $GLOBALS['_xmlrpc_debuginfo']) . "\n]]>\n";
\r
558 * Execute the xmlrpc request, printing the response
\r
559 * @param string $data the request body. If null, the http POST request will be examined
\r
560 * @return xmlrpcresp the response object (usually not used by caller...)
\r
563 function service($data=null, $return_payload=false)
\r
565 if ($data === null)
\r
567 $data = isset($GLOBALS['HTTP_RAW_POST_DATA']) ? $GLOBALS['HTTP_RAW_POST_DATA'] : '';
\r
571 // reset internal debug info
\r
572 $this->debug_info = '';
\r
574 // Echo back what we received, before parsing it
\r
575 if($this->debug > 1)
\r
577 $this->debugmsg("+++GOT+++\n" . $data . "\n+++END+++");
\r
580 $r = $this->parseRequestHeaders($data, $req_charset, $resp_charset, $resp_encoding);
\r
583 $r=$this->parseRequest($data, $req_charset);
\r
586 // save full body of request into response, for more debugging usages
\r
587 $r->raw_data = $raw_data;
\r
589 if($this->debug > 2 && $GLOBALS['_xmlrpcs_occurred_errors'])
\r
591 $this->debugmsg("+++PROCESSING ERRORS AND WARNINGS+++\n" .
\r
592 $GLOBALS['_xmlrpcs_occurred_errors'] . "+++END+++");
\r
595 $payload=$this->xml_header($resp_charset);
\r
596 if($this->debug > 0)
\r
598 $payload = $payload . $this->serializeDebug($resp_charset);
\r
601 // G. Giunta 2006-01-27: do not create response serialization if it has
\r
602 // already happened. Helps building json magic
\r
603 if (empty($r->payload))
\r
605 $r->serialize($resp_charset);
\r
607 $payload = $payload . $r->payload;
\r
609 if ($return_payload)
\r
614 // if we get a warning/error that has output some text before here, then we cannot
\r
615 // add a new header. We cannot say we are sending xml, either...
\r
616 if(!headers_sent())
\r
618 header('Content-Type: '.$r->content_type);
\r
619 // we do not know if client actually told us an accepted charset, but if he did
\r
620 // we have to tell him what we did
\r
621 header("Vary: Accept-Charset");
\r
623 // http compression of output: only
\r
624 // if we can do it, and we want to do it, and client asked us to,
\r
625 // and php ini settings do not force it already
\r
626 $php_no_self_compress = ini_get('zlib.output_compression') == '' && (ini_get('output_handler') != 'ob_gzhandler');
\r
627 if($this->compress_response && function_exists('gzencode') && $resp_encoding != ''
\r
628 && $php_no_self_compress)
\r
630 if(i18n::strpos($resp_encoding, 'gzip') !== false)
\r
632 $payload = gzencode($payload);
\r
633 header("Content-Encoding: gzip");
\r
634 header("Vary: Accept-Encoding");
\r
636 elseif (i18n::strpos($resp_encoding, 'deflate') !== false)
\r
638 $payload = gzcompress($payload);
\r
639 header("Content-Encoding: deflate");
\r
640 header("Vary: Accept-Encoding");
\r
644 // do not ouput content-length header if php is compressing output for us:
\r
645 // it will mess up measurements
\r
646 if($php_no_self_compress)
\r
648 header('Content-Length: ' . (int)i18n::strlen($payload));
\r
653 error_log('XML-RPC: xmlrpc_server::service: http headers already sent before response is fully generated. Check for php warning or error messages');
\r
658 // return request, in case subclasses want it
\r
663 * Add a method to the dispatch map
\r
664 * @param string $methodname the name with which the method will be made available
\r
665 * @param string $function the php function that will get invoked
\r
666 * @param array $sig the array of valid method signatures
\r
667 * @param string $doc method documentation
\r
670 function add_to_map($methodname,$function,$sig=null,$doc='')
\r
672 $this->dmap[$methodname] = array(
\r
673 'function' => $function,
\r
674 'docstring' => $doc
\r
678 $this->dmap[$methodname]['signature'] = $sig;
\r
683 * Verify type and number of parameters received against a list of known signatures
\r
684 * @param array $in array of either xmlrpcval objects or xmlrpc type definitions
\r
685 * @param array $sig array of known signatures to match against
\r
688 function verifySignature($in, $sig)
\r
690 // check each possible signature in turn
\r
691 if (is_object($in))
\r
693 $numParams = $in->getNumParams();
\r
697 $numParams = count($in);
\r
699 foreach($sig as $cursig)
\r
701 if(count($cursig)==$numParams+1)
\r
704 for($n=0; $n<$numParams; $n++)
\r
706 if (is_object($in))
\r
708 $p=$in->getParam($n);
\r
709 if($p->kindOf() == 'scalar')
\r
711 $pt=$p->scalartyp();
\r
720 $pt= $in[$n] == 'i4' ? 'int' : $in[$n]; // dispatch maps never use i4...
\r
723 // param index is $n+1, as first member of sig is return type
\r
724 if($pt != $cursig[$n+1] && $cursig[$n+1] != $GLOBALS['xmlrpcValue'])
\r
728 $wanted=$cursig[$n+1];
\r
735 return array(1,'');
\r
741 return array(0, "Wanted ${wanted}, got ${got} at param ${pno}");
\r
745 return array(0, "No method signature matches number of parameters");
\r
750 * Parse http headers received along with xmlrpc request. If needed, inflate request
\r
751 * @return null on success or an xmlrpcresp
\r
754 function parseRequestHeaders(&$data, &$req_encoding, &$resp_encoding, &$resp_compression)
\r
756 // Play nice to PHP 4.0.x: superglobals were not yet invented...
\r
757 if(!isset($_SERVER))
\r
759 $_SERVER = $GLOBALS['HTTP_SERVER_VARS'];
\r
762 if($this->debug > 1)
\r
764 if(function_exists('getallheaders'))
\r
766 $this->debugmsg(''); // empty line
\r
767 foreach(getallheaders() as $name => $val)
\r
769 $this->debugmsg("HEADER: $name: $val");
\r
775 if(isset($_SERVER['HTTP_CONTENT_ENCODING']))
\r
777 $content_encoding = str_replace('x-', '', $_SERVER['HTTP_CONTENT_ENCODING']);
\r
781 $content_encoding = '';
\r
784 // check if request body has been compressed and decompress it
\r
785 if($content_encoding != '' && i18n::strlen($data))
\r
787 if($content_encoding == 'deflate' || $content_encoding == 'gzip')
\r
789 // if decoding works, use it. else assume data wasn't gzencoded
\r
790 if(function_exists('gzinflate') && in_array($content_encoding, $this->accepted_compression))
\r
792 if($content_encoding == 'deflate' && $degzdata = @gzuncompress($data))
\r
795 if($this->debug > 1)
\r
797 $this->debugmsg("\n+++INFLATED REQUEST+++[".i18n::strlen($data)." chars]+++\n" . $data . "\n+++END+++");
\r
800 elseif($content_encoding == 'gzip' && $degzdata = @gzinflate(i18n::substr($data, 10)))
\r
803 if($this->debug > 1)
\r
804 $this->debugmsg("+++INFLATED REQUEST+++[".i18n::strlen($data)." chars]+++\n" . $data . "\n+++END+++");
\r
808 $r = new xmlrpcresp(0, $GLOBALS['xmlrpcerr']['server_decompress_fail'], $GLOBALS['xmlrpcstr']['server_decompress_fail']);
\r
814 //error_log('The server sent deflated data. Your php install must have the Zlib extension compiled in to support this.');
\r
815 $r = new xmlrpcresp(0, $GLOBALS['xmlrpcerr']['server_cannot_decompress'], $GLOBALS['xmlrpcstr']['server_cannot_decompress']);
\r
821 // check if client specified accepted charsets, and if we know how to fulfill
\r
823 if ($this->response_charset_encoding == 'auto')
\r
825 $resp_encoding = '';
\r
826 if (isset($_SERVER['HTTP_ACCEPT_CHARSET']))
\r
828 // here we should check if we can match the client-requested encoding
\r
829 // with the encodings we know we can generate.
\r
830 /// @todo we should parse q=0.x preferences instead of getting first charset specified...
\r
831 $client_accepted_charsets = preg_split('#,#', strtoupper($_SERVER['HTTP_ACCEPT_CHARSET']));
\r
832 // Give preference to internal encoding
\r
833 $known_charsets = array($this->internal_encoding, 'UTF-8', 'ISO-8859-1', 'US-ASCII');
\r
834 foreach ($known_charsets as $charset)
\r
836 foreach ($client_accepted_charsets as $accepted)
\r
837 if (i18n::strpos($accepted, $charset) === 0)
\r
839 $resp_encoding = $charset;
\r
842 if ($resp_encoding)
\r
849 $resp_encoding = $this->response_charset_encoding;
\r
852 if (isset($_SERVER['HTTP_ACCEPT_ENCODING']))
\r
854 $resp_compression = $_SERVER['HTTP_ACCEPT_ENCODING'];
\r
858 $resp_compression = '';
\r
861 // 'guestimate' request encoding
\r
862 /// @todo check if mbstring is enabled and automagic input conversion is on: it might mingle with this check???
\r
863 $req_encoding = guess_encoding(isset($_SERVER['CONTENT_TYPE']) ? $_SERVER['CONTENT_TYPE'] : '',
\r
870 * Parse an xml chunk containing an xmlrpc request and execute the corresponding
\r
871 * php function registered with the server
\r
872 * @param string $data the xml request
\r
873 * @param string $req_encoding (optional) the charset encoding of the xml request
\r
874 * @return xmlrpcresp
\r
877 function parseRequest($data, $req_encoding='')
\r
879 // 2005/05/07 commented and moved into caller function code
\r
882 // $data=$GLOBALS['HTTP_RAW_POST_DATA'];
\r
885 // G. Giunta 2005/02/13: we do NOT expect to receive html entities
\r
886 // so we do not try to convert them into xml character entities
\r
887 //$data = xmlrpc_html_entity_xlate($data);
\r
889 $GLOBALS['_xh']=array();
\r
890 $GLOBALS['_xh']['ac']='';
\r
891 $GLOBALS['_xh']['stack']=array();
\r
892 $GLOBALS['_xh']['valuestack'] = array();
\r
893 $GLOBALS['_xh']['params']=array();
\r
894 $GLOBALS['_xh']['pt']=array();
\r
895 $GLOBALS['_xh']['isf']=0;
\r
896 $GLOBALS['_xh']['isf_reason']='';
\r
897 $GLOBALS['_xh']['method']=false; // so we can check later if we got a methodname or not
\r
898 $GLOBALS['_xh']['rt']='';
\r
900 // decompose incoming XML into request structure
\r
901 if ($req_encoding != '')
\r
903 if (!in_array($req_encoding, array('UTF-8', 'ISO-8859-1', 'US-ASCII')))
\r
904 // the following code might be better for mb_string enabled installs, but
\r
905 // makes the lib about 200% slower...
\r
906 //if (!is_valid_charset($req_encoding, array('UTF-8', 'ISO-8859-1', 'US-ASCII')))
\r
908 error_log('XML-RPC: xmlrpc_server::parseRequest: invalid charset encoding of received request: '.$req_encoding);
\r
909 $req_encoding = $GLOBALS['xmlrpc_defencoding'];
\r
911 /// @BUG this will fail on PHP 5 if charset is not specified in the xml prologue,
\r
912 // the encoding is not UTF8 and there are non-ascii chars in the text...
\r
913 $parser = xml_parser_create($req_encoding);
\r
917 $parser = xml_parser_create();
\r
920 xml_parser_set_option($parser, XML_OPTION_CASE_FOLDING, true);
\r
921 // G. Giunta 2005/02/13: PHP internally uses ISO-8859-1, so we have to tell
\r
922 // the xml parser to give us back data in the expected charset
\r
923 xml_parser_set_option($parser, XML_OPTION_TARGET_ENCODING, $GLOBALS['xmlrpc_internalencoding']);
\r
925 if ($this->functions_parameters_type != 'xmlrpcvals')
\r
926 xml_set_element_handler($parser, 'xmlrpc_se', 'xmlrpc_ee_fast');
\r
928 xml_set_element_handler($parser, 'xmlrpc_se', 'xmlrpc_ee');
\r
929 xml_set_character_data_handler($parser, 'xmlrpc_cd');
\r
930 xml_set_default_handler($parser, 'xmlrpc_dh');
\r
931 if(!xml_parse($parser, $data, 1))
\r
933 // return XML error as a faultCode
\r
934 $r = new xmlrpcresp(0,
\r
935 $GLOBALS['xmlrpcerrxml']+xml_get_error_code($parser),
\r
936 sprintf('XML error: %s at line %d, column %d',
\r
937 xml_error_string(xml_get_error_code($parser)),
\r
938 xml_get_current_line_number($parser), xml_get_current_column_number($parser)));
\r
939 xml_parser_free($parser);
\r
941 elseif ($GLOBALS['_xh']['isf'])
\r
943 xml_parser_free($parser);
\r
944 $r = new xmlrpcresp(0,
\r
945 $GLOBALS['xmlrpcerr']['invalid_request'],
\r
946 $GLOBALS['xmlrpcstr']['invalid_request'] . ' ' . $GLOBALS['_xh']['isf_reason']);
\r
950 xml_parser_free($parser);
\r
951 if ($this->functions_parameters_type != 'xmlrpcvals')
\r
953 if($this->debug > 1)
\r
955 $this->debugmsg("\n+++PARSED+++\n".var_export($GLOBALS['_xh']['params'], true)."\n+++END+++");
\r
957 $r = $this->execute($GLOBALS['_xh']['method'], $GLOBALS['_xh']['params'], $GLOBALS['_xh']['pt']);
\r
961 // build an xmlrpcmsg object with data parsed from xml
\r
962 $m= new xmlrpcmsg($GLOBALS['_xh']['method']);
\r
963 // now add parameters in
\r
964 for($i=0; $i<count($GLOBALS['_xh']['params']); $i++)
\r
966 $m->addParam($GLOBALS['_xh']['params'][$i]);
\r
969 if($this->debug > 1)
\r
971 $this->debugmsg("\n+++PARSED+++\n".var_export($m, true)."\n+++END+++");
\r
974 $r = $this->execute($m);
\r
981 * Execute a method invoked by the client, checking parameters used
\r
982 * @param mixed $m either an xmlrpcmsg obj or a method name
\r
983 * @param array $params array with method parameters as php types (if m is method name only)
\r
984 * @param array $paramtypes array with xmlrpc types of method parameters (if m is method name only)
\r
985 * @return xmlrpcresp
\r
988 function execute($m, $params=null, $paramtypes=null)
\r
992 $methName = $m->method();
\r
998 $sysCall = $this->allow_system_funcs && (i18n::strpos($methName, "system.") === 0);
\r
999 $dmap = $sysCall ? $GLOBALS['_xmlrpcs_dmap'] : $this->dmap;
\r
1001 if(!isset($dmap[$methName]['function']))
\r
1004 return new xmlrpcresp(0,
\r
1005 $GLOBALS['xmlrpcerr']['unknown_method'],
\r
1006 $GLOBALS['xmlrpcstr']['unknown_method']);
\r
1009 // Check signature
\r
1010 if(isset($dmap[$methName]['signature']))
\r
1012 $sig = $dmap[$methName]['signature'];
\r
1013 if (is_object($m))
\r
1015 list($ok, $errstr) = $this->verifySignature($m, $sig);
\r
1019 list($ok, $errstr) = $this->verifySignature($paramtypes, $sig);
\r
1024 return new xmlrpcresp(
\r
1026 $GLOBALS['xmlrpcerr']['incorrect_params'],
\r
1027 $GLOBALS['xmlrpcstr']['incorrect_params'] . ": ${errstr}"
\r
1032 $func = $dmap[$methName]['function'];
\r
1033 // let the 'class::function' syntax be accepted in dispatch maps
\r
1034 if(is_string($func) && i18n::strpos($func, '::'))
\r
1036 $func = preg_split('#::#', $func);
\r
1038 // verify that function to be invoked is in fact callable
\r
1039 if(!is_callable($func))
\r
1041 error_log("XML-RPC: xmlrpc_server::execute: function $func registered as method handler is not callable");
\r
1042 return new xmlrpcresp(
\r
1044 $GLOBALS['xmlrpcerr']['server_error'],
\r
1045 $GLOBALS['xmlrpcstr']['server_error'] . ": no function matches method"
\r
1049 // If debug level is 3, we should catch all errors generated during
\r
1050 // processing of user function, and log them as part of response
\r
1051 if($this->debug > 2)
\r
1053 $GLOBALS['_xmlrpcs_prev_ehandler'] = set_error_handler('_xmlrpcs_errorHandler');
\r
1055 if (is_object($m))
\r
1059 $r = call_user_func($func, $this, $m);
\r
1063 $r = call_user_func($func, $m);
\r
1065 if (!is_a($r, 'xmlrpcresp'))
\r
1067 error_log("XML-RPC: xmlrpc_server::execute: function $func registered as method handler does not return an xmlrpcresp object");
\r
1068 if (is_a($r, 'xmlrpcval'))
\r
1070 $r = new xmlrpcresp($r);
\r
1074 $r = new xmlrpcresp(
\r
1076 $GLOBALS['xmlrpcerr']['server_error'],
\r
1077 $GLOBALS['xmlrpcstr']['server_error'] . ": function does not return xmlrpcresp object"
\r
1084 // call a 'plain php' function
\r
1087 array_unshift($params, $this);
\r
1088 $r = call_user_func_array($func, $params);
\r
1092 // 3rd API convention for method-handling functions: EPI-style
\r
1093 if ($this->functions_parameters_type == 'epivals')
\r
1095 $r = call_user_func_array($func, array($methName, $params, $this->user_data));
\r
1096 // mimic EPI behaviour: if we get an array that looks like an error, make it
\r
1097 // an eror response
\r
1098 if (is_array($r) && array_key_exists('faultCode', $r) && array_key_exists('faultString', $r))
\r
1100 $r = new xmlrpcresp(0, (integer)$r['faultCode'], (string)$r['faultString']);
\r
1104 // functions using EPI api should NOT return resp objects,
\r
1105 // so make sure we encode the return type correctly
\r
1106 $r = new xmlrpcresp(php_xmlrpc_encode($r, array('extension_api')));
\r
1111 $r = call_user_func_array($func, $params);
\r
1114 // the return type can be either an xmlrpcresp object or a plain php value...
\r
1115 if (!is_a($r, 'xmlrpcresp'))
\r
1117 // what should we assume here about automatic encoding of datetimes
\r
1118 // and php classes instances???
\r
1119 $r = new xmlrpcresp(php_xmlrpc_encode($r, array('auto_dates')));
\r
1122 if($this->debug > 2)
\r
1124 // note: restore the error handler we found before calling the
\r
1125 // user func, even if it has been changed inside the func itself
\r
1126 if($GLOBALS['_xmlrpcs_prev_ehandler'])
\r
1128 set_error_handler($GLOBALS['_xmlrpcs_prev_ehandler']);
\r
1132 restore_error_handler();
\r
1139 * add a string to the 'internal debug message' (separate from 'user debug message')
\r
1140 * @param string $strings
\r
1143 function debugmsg($string)
\r
1145 $this->debug_info .= $string."\n";
\r
1151 function xml_header($charset_encoding='')
\r
1153 if ($charset_encoding != '')
\r
1155 return "<?xml version=\"1.0\" encoding=\"$charset_encoding\"?" . ">\n";
\r
1159 return "<?xml version=\"1.0\"?" . ">\n";
\r
1164 * A debugging routine: just echoes back the input packet as a string value
\r
1167 function echoInput()
\r
1169 $r = new xmlrpcresp(new xmlrpcval( "'Aha said I: '" . $GLOBALS['HTTP_RAW_POST_DATA'], 'string'));
\r
1170 print $r->serialize();
\r