2 Open I2C Radio v1.0 (RC1)
4 http://sourceforge.jp/projects/openi2cradio/
5 http://sourceforge.jp/projects/openi2cradio/wiki/FrontPage
6 Sep 12, 2013 K.Ohta <whatisthis.sowhat _at_ gmail.com>
8 If you can read Japanese , see Readme.ja.txt.
12 This is FOSS Radio capablity with BCL(BroadCasting Listening),
13 controlled by micro-controller.
17 - Hardware: CC-BY-SA v3.0
18 - Software: GPLv2+LE (Basically GPLv2, but SDCC/XC8's libraries is
21 I *do not* restrict commercial-use!
22 But, I'm very,very,very,(repeat 253times) poor X-)
23 So, please contact and donate to me if you pleasure or using to commercial products!
24 If you don't use to commercial product, I also welcome donation from you ;)
27 * MCU, as of PIC18F45K20. But (maybe) easy to port to other MCU, PIC18F
28 family or (maybe) AVR, ATMega, but not tested yet.
29 http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en026337
31 * AKC6955 DSP-RADIO-CHIP made by disipur.com (深圳市迪斯普科技有限公司) in china.
32 Japanese shop AITENDO sells this chip as DIP MODULE.
33 http://www.disipur.com/down/html/?4.html
34 http://www.aitendo.com/product/7012
36 * LCD character display with HD44780 compatible and 3.3V powered.
37 I recommand 16colomns x 2lines display or larger.
39 * 8.000MHz christal or ceramic-rezonator.
41 * And other electronics parts and tools ;)
43 * Microchip's MPLAB X IDE.(Maybe not need?)
44 http://www.microchip.com/pagehandler/en-us/family/mplabx/
46 * Compiler: Microchip's XC8 compiler.
47 If you want to build with SDCC(v.3.3.x),
48 you should use greater than 48KB program-area PIC18F.
49 http://sdcc.sourceforge.net/
50 http://www.microchip.com/pagehandler/en_us/devtools/mplabxc/
54 1. Assemble circuits below of gSCH/ . MW/SW Pre amp seems to be
55 not needed if your home is better or has good antenna.
56 2. Burn bin/*/*.hex to PIC18F45K20 (or other) MCU via MPLAB X IPE
58 Put MCU(or others) to board.
59 And play to GOD,Budda,Allah(or other) ;) and turn on power.