OSDN Git Service
Daniel P. Berrangé [Mon, 20 Nov 2023 15:08:20 +0000 (15:08 +0000)]
tests/docker: replace fedora-i386 with debian-i686
Fedora is gradually killing off i386 packages in its repos, via a
death-by-1000-cuts process. Thus Debian looks like a better long
term bet for i686 build testing. It has the added advantage that
we can generate it via lcitool too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20231107164109.
1449014-1-berrange@redhat.com>
[AJB: tweak commit msg, set correct prefix]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20231120150833.
2552739-2-alex.bennee@linaro.org>
Stefan Hajnoczi [Wed, 22 Nov 2023 14:39:23 +0000 (09:39 -0500)]
Merge tag 'pull-riscv-to-apply-
20231122' of https://github.com/alistair23/qemu into staging
Fourth RISC-V PR for 8.2
This is a few bug fixes for the 8.2 release
* Add Zicboz block size to hwprobe
* Creat the virt machine FDT before machine init is complete
* Don't verify ISA compatibility for zicntr and zihpm
* Fix SiFive E CLINT clock frequency
* Fix invalid exception on MMU translation stage
* Fix mxr bit behavior
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVdk4sACgkQr3yVEwxT
# gBP6gQ/+NzdRT8Wx/9ynnKs0XwXBwOjQTHDcxCIKLWYrM26c3M+4XEU6IBdg2X1T
# qRv9Xal/pXqvAz8tIunF1fNd0Syom4UezcjvLjzipWwS32+D9KEKhKz89aoQc2SQ
# lnTBYz6lSUNppp3wj68gNAyPpht+5zVwYZDsjeZCRlAS00dcl26Xde8kt9tJW7zy
# tPBvHtJP9AVc+HJdClytEZ79G+EHN5Y4ScoJsVinXSBZs9lIQD+nPmFbxopre6kg
# +RUk56eATIlVMISD5pCYyCr3jTebMqVIFY9xtQxb4R09aLYN6+k13NfsJeIcQgaF
# MbhAGE0WbXEhKyHe4BuVtyz2k+zYtoh6YSE2Czub2pzPAfpKKWiu4Odi7vHlYejw
# Nksn3N7LR3FbhrDst71+EQ28vUuEYfECEFICjzHb+DhxlPxHW9WC4f8ciTUpT57O
# HPWYN7zn5Yw97nGBVuITVO7DfcQcw8MS8HcFEelkeDOephiDKr327SWTL+lp5+P5
# fm7PM4Z92GRvT3Voj4mebVxC62CGqehDotWRvXCvc87m4DfLsmpt0nNeX9q18zw+
# phEZ5Q8AMmEnRzpmoXEzzcDWyJIO6huJFad0imTR6MqvXYxsJYIr+wURDB6POelP
# SfMqdX9cTu8xJ7Hw4gJT9ZgcTlKsTq5LNpGZ/kLPXS6/y7fgC5Y=
# =QK14
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Nov 2023 00:37:15 EST
# gpg: using RSA key
6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-
20231122' of https://github.com/alistair23/qemu:
target/riscv/cpu_helper.c: Fix mxr bit behavior
target/riscv/cpu_helper.c: Invalid exception on MMU translation stage
riscv: Fix SiFive E CLINT clock frequency
target/riscv: don't verify ISA compatibility for zicntr and zihpm
hw/riscv/virt.c: do create_fdt() earlier, add finalize_fdt()
linux-user/riscv: Add Zicboz block size to hwprobe
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 22 Nov 2023 14:38:41 +0000 (09:38 -0500)]
Merge tag 'seabios-hppa-v13-pull-request' of https://github.com/hdeller/qemu-hppa into staging
SeaBIOS-hppa v13
Please pull an update of SeaBIOS-hppa to v13 to fix
a system reboot crash in qemu-system-hppa as reported in
https://gitlab.com/qemu-project/qemu/-/issues/1991
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZV0uiQAKCRD3ErUQojoP
# X/UEAP4vVLO/21SwO8/UpmImQPGTpoGUxA2DWYHBfjmyVGEoqwEA1sfhqpdahDJ0
# FLSculh9fFG7vWOMCZo2Xnur+X9ahgQ=
# =FaBT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 17:26:17 EST
# gpg: using EDDSA key
BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v13-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 13
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ivan Klokov [Tue, 21 Nov 2023 07:17:57 +0000 (10:17 +0300)]
target/riscv/cpu_helper.c: Fix mxr bit behavior
According to RISCV Specification sect 9.5 on two stage translation when
V=1 the vsstatus(mstatus in QEMU's terms) field MXR, which makes
execute-only pages readable, only overrides VS-stage page protection.
Setting MXR at HS-level(mstatus_hs), however, overrides both VS-stage
and G-stage execute-only permissions.
The hypervisor extension changes the behavior of MXR\MPV\MPRV bits.
Due to RISCV Specification sect. 9.4.1 when MPRV=1, explicit memory
accesses are translated and protected, and endianness is applied, as
though the current virtualization mode were set to MPV and the current
nominal privilege mode were set to MPP. vsstatus.MXR makes readable
those pages marked executable at the VS translation stage.
Fixes:
36a18664ba ("target/riscv: Implement second stage MMU")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <
20231121071757.7178-3-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ivan Klokov [Tue, 21 Nov 2023 07:17:56 +0000 (10:17 +0300)]
target/riscv/cpu_helper.c: Invalid exception on MMU translation stage
According to RISCV privileged spec sect. 5.3.2 Virtual Address Translation Process
access-fault exceptions may raise only after PMA/PMP check. Current implementation
generates an access-fault for mbare mode even if there were no PMA/PMP errors.
This patch removes the erroneous MMU mode check and generates an access-fault
exception based on the pmp_violation flag only.
Fixes:
1448689c7b ("target/riscv: Allow specifying MMU stage")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <
20231121071757.7178-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Román Cárdenas [Fri, 17 Nov 2023 08:28:42 +0000 (09:28 +0100)]
riscv: Fix SiFive E CLINT clock frequency
If you check the manual of SiFive E310 (https://cdn.sparkfun.com/assets/7/f/0/2/7/fe310-g002-manual-v19p05.pdf),
you can see in Figure 1 that the CLINT is connected to the real time clock, which also feeds the AON peripheral (they share the same clock).
In page 43, the docs also say that the timer registers of the CLINT count ticks from the rtcclk.
I am currently playing with bare metal applications both in QEMU and a physical SiFive E310 board and
I confirm that the CLINT clock in the physical board runs at 32.768 kHz.
In QEMU, the same app produces a completely different outcome, as sometimes a new CLINT interrupt is triggered before finishing other tasks.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1978
Signed-off-by: Rom\ufffd\ufffdn C\ufffd\ufffdrdenas <rcardenas.rod@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <
20231117082840.55705-1-rcardenas.rod@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 14 Nov 2023 12:39:13 +0000 (13:39 +0100)]
target/riscv: don't verify ISA compatibility for zicntr and zihpm
The extensions zicntr and zihpm were officially added in the privilege
instruction set specification 1.12. However, QEMU has been implemented
them long before it and thus they are forced to be on during the cpu
initialization to ensure compatibility (see riscv_cpu_init).
riscv_cpu_disable_priv_spec_isa_exts was not updated when the above
behavior was introduced, resulting in these extensions to be disabled
after all.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes:
c004099330 ("target/riscv: add zicntr extension flag for TCG")
Fixes:
0824121660 ("target/riscv: add zihpm extension flag for TCG")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231114123913.536194-1-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Fri, 10 Nov 2023 17:25:59 +0000 (14:25 -0300)]
hw/riscv/virt.c: do create_fdt() earlier, add finalize_fdt()
Commit
49554856f0 fixed a problem, where TPM devices were not appearing
in the FDT, by delaying the FDT creation up until virt_machine_done().
This create a side effect (see gitlab #1925) - devices that need access
to the '/chosen' FDT node during realize() stopped working because, at
that point, we don't have a FDT.
This happens because our FDT creation is monolithic, but it doesn't need
to be. We can add the needed FDT components for realize() time and, at
the same time, do another FDT round where we account for dynamic sysbus
devices. In other words, the problem fixed by
49554856f0 could also be
fixed by postponing only create_fdt_sockets() and its dependencies,
leaving everything else from create_fdt() to be done during init().
Split the FDT creation in two parts:
- create_fdt(), now moved back to virt_machine_init(), will create FDT
nodes that doesn't depend on additional (dynamic) devices from the
sysbus;
- a new finalize_fdt() step is added, where create_fdt_sockets() and
friends is executed, accounting for the dynamic sysbus devices that
were added during realize().
This will make both use cases happy: TPM devices are still working as
intended, and devices such as 'guest-loader' have a FDT to work on
during realize().
Fixes:
49554856f0 ("riscv: Generate devicetree only after machine initialization is complete")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1925
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231110172559.73209-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Palmer Dabbelt [Fri, 10 Nov 2023 17:37:16 +0000 (09:37 -0800)]
linux-user/riscv: Add Zicboz block size to hwprobe
Support for probing the Zicboz block size landed in Linux 6.6, which was
released a few weeks ago. This provides the user-configured block size
when Zicboz is enabled.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <
20231110173716.24423-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Helge Deller [Tue, 21 Nov 2023 20:23:03 +0000 (21:23 +0100)]
target/hppa: Update SeaBIOS-hppa to version 13
SeaBIOS-hppa version 13 fixes a system reboot crash as reported
in https://gitlab.com/qemu-project/qemu/-/issues/1991
Signed-off-by: Helge Deller <deller@gmx.de>
Stefan Hajnoczi [Tue, 21 Nov 2023 18:56:12 +0000 (13:56 -0500)]
Update version for v8.2.0-rc1 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 18:16:35 +0000 (13:16 -0500)]
Merge tag 'pull-lu-
20231121' of https://gitlab.com/rth7680/qemu into staging
linux-user: Fix loaddr computation for some elf files
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVc0wUdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV97FQf+LHUf8Np5uiPwmu0f
# SUVlfxccp1KjQE2pppQ16TReNV/GsJd1u4VvInhDZSMrwceCmi1T8q3n75Vff5h0
# mUaCsNKCBVOgmvjtQ+9gOCEtPNYTpEBZyfs6I4iX4+mpkDSMON28CDakILHRSAG/
# NwFs3I8E773dERR6tJmvBjAKr0a7QYMHHbXFkGN0QSaCo3YVuqMgZj1+5oGGUMun
# 8f1HSRDvtAtKQgCmzsP9FEjpS4/T2ElppS0vvy063gD60Vkg9h8gyT/eFkQQMiHq
# SKo1nvhuCd/xMW67RIdm6fyvgkiDvNBV5/ae8Zqdlk7TGDQP24/V3gWtTEHyQWu6
# QteijA==
# =ryU1
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 10:55:49 EST
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-lu-
20231121' of https://gitlab.com/rth7680/qemu:
linux-user: Fix loaddr computation for some elf files
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Thomas Huth [Tue, 21 Nov 2023 10:08:42 +0000 (11:08 +0100)]
Revert "tests/avocado: Enable reverse_debugging.py tests in gitlab CI"
This reverts commit
c4d74ab24a02c90b7a3240510b3dd4e1bec536dd.
The reverse debugging test is sometimes still failing. See:
https://gitlab.com/qemu-project/qemu/-/issues/1992
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <
20231121100842.677363-1-thuth@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 15:27:10 +0000 (10:27 -0500)]
Merge tag 'pull-xenfv-
20231121' of git://git.infradead.org/users/dwmw2/qemu into staging
Xen fixes for 8.2-rc1
• Disable default serial when xen-console is used
• Fix Coverity warning in xen-block
# -----BEGIN PGP SIGNATURE-----
#
# iQJIBAABCAAyFiEEvgfZ/VSAmrLEsP9fY3Ys2mfi81kFAmVcmrAUHGR3bXcyQGlu
# ZnJhZGVhZC5vcmcACgkQY3Ys2mfi81njqg/8DFr03kVfwRujIZXDROoq40vjgdOF
# MoGgowDNapliXiecVcHzdvFXgRxwr9bhpX5eDEtfgROoH8mbPPd4YZJHdPNM0Yc3
# 0hoSWrIYocsYRAIoozXrtsNw8ep2vSEPNv5+CIVYkkie/mLs02cy43q09cJDzABx
# DvmSfC5o5JCs/x3qPLM6ydhnTaUipuPt1wnG9xaJLWgm/U9pK6Ba9w1eNGn8EE7m
# ekzpv9lYfCd/KbPogtXAEd7nkCOi/lKQVJmU7auXFi8FKwZNoKOYl3cTVln/EFmT
# az3qLSHgOZwElNQEYn0mBa/RgAQ2K9X7n12TgxG30VSUmajxJnl/eKy4ISyaAmwY
# vNVhdsXQICqM4OYaD2j8RiXX5YNtIC+MBb7nlUN7invKXE9ZylHbXvOstkUCjQ34
# x9CMVIibPoWk7XGUX+r7KUSwSQnpelVbqBWltkmgNjYuUIShDT6r5cOrYdM2orii
# UYOqPJqchbEDNoGwJK45EOSn8Ss5geAWuM7dFL0AuwZAbcKAqGG6vihPnDJyhnWA
# EPv2/5h2Vi24fqeWz3W+hckm8LXrc2Ow8A0rY3WAz7CvmBTgYCPx4d4kdTU6Gysn
# i8DRoKMhZS9WvHPPxY1v8+ysG1UCCNFe4qH0Wgv+ubSbr5GaK2igWIBQ5bXnuYL8
# R4Ef5pPLpa2jiF4=
# =cWon
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 06:55:28 EST
# gpg: using RSA key
BE07D9FD54809AB2C4B0FF5F63762CDA67E2F359
# gpg: issuer "dwmw2@infradead.org"
# gpg: Good signature from "David Woodhouse <dwmw2@infradead.org>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@exim.org>" [unknown]
# gpg: aka "David Woodhouse <david@woodhou.se>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@kernel.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE07 D9FD 5480 9AB2 C4B0 FF5F 6376 2CDA 67E2 F359
* tag 'pull-xenfv-
20231121' of git://git.infradead.org/users/dwmw2/qemu:
hw/xen: clean up xen_block_find_free_vdev() to avoid Coverity false positive
vl: disable default serial when xen-console is enabled
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 15:26:43 +0000 (10:26 -0500)]
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Fix graph lock related deadlocks with the stream job
- ahci: Fix legacy software reset
- ide/via: Fix switch between compatibility and native mode
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVcmYoRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YDzw/7BD6wZpyCsDbFu9Jbt0L894tYQls7otnR
# yeAIaZVqSkDcMK8VBD/xAjV8UgX194oKPi42CDgS73avd0cSHLIM5cNgGkwCrMWS
# ry5uuOP6EWVMPPR/129cpH8uGvkl+qwCQf5gB13/8NvMbeN2mHOTC6WW+VA20vb0
# V0DJXhYszVzXa3L1a/m6f4Jwj54tTeZ56JcBblL3wi/soklb45gsnPJaHeGb3rzK
# yjPkw+kpVXTVbpacobGmzmjlD3Yqk69NexP2kyU1w2lqPnemYPH+9sa+7RxMspkj
# InQvqq6TFtMOrC/65/527p2ENRUOxn7Xwsa1+Hnar2i3BoyGugWE8GPxJDBxAWW4
# INJtpxIpiA7Scd26VBCNVstVe5EuyxkP97T85cgNUMgeE58y3i51i6eHd4GUIR7v
# PNc5TsSbnVV8sQ7RsXka4hRyjndIPRB0CBePydDoBz6zaGmcVU6ep0Oppah9gVu9
# CU0dBz2jV0r1dFhU1eZkCbd1ufdR93R/iD3gBD4vj1xSL3l+9OE/FKdrVE66uElL
# iAsHp3cimkPuWAx/jZaeAC7BDI0XS6s1TimddqJx90f2mZjkq8cmVp+HoVNP0jRQ
# VP6AIQy6is+P4QtDSekgXVJE8K95ngBzsr+ittR8jF4q67QzHVjLmJ9ZBXyrowlz
# gtZTy2WPxbM=
# =8dXj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 06:50:34 EST
# gpg: using RSA key
DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
hw/ide/via: implement legacy/native mode switching
ide/via: don't attempt to set default BAR addresses
ide/pci: introduce pci_ide_update_mode() function
ide/ioport: move ide_portio_list[] and ide_portio_list2[] definitions to IDE core
iotests: Test two stream jobs in a single iothread
stream: Fix AioContext locking during bdrv_graph_wrlock()
block: Fix deadlocks in bdrv_graph_wrunlock()
block: Fix bdrv_graph_wrlock() call in blk_remove_bs()
hw/ide/ahci: fix legacy software reset
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Richard Henderson [Tue, 14 Nov 2023 20:13:29 +0000 (12:13 -0800)]
linux-user: Fix loaddr computation for some elf files
The file offset of the load segment is not relevant to the
low address, only the beginning of the virtual address page.
Cc: qemu-stable@nongnu.org
Fixes:
a93934fecd4 ("elf: take phdr offset into account when calculating the program load address")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1952
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Mark Cave-Ayland [Thu, 16 Nov 2023 10:33:55 +0000 (10:33 +0000)]
hw/ide/via: implement legacy/native mode switching
Allow the VIA IDE controller to switch between both legacy and native modes by
calling pci_ide_update_mode() to reconfigure the device whenever PCI_CLASS_PROG
is updated.
This patch moves the initial setting of PCI_CLASS_PROG from via_ide_realize() to
via_ide_reset(), and removes the direct setting of PCI_INTERRUPT_PIN during PCI
bus reset since this is now managed by pci_ide_update_mode(). This ensures that
the device configuration is always consistent with respect to the currently
selected mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <
20231116103355.588580-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark Cave-Ayland [Thu, 16 Nov 2023 10:33:54 +0000 (10:33 +0000)]
ide/via: don't attempt to set default BAR addresses
The via-ide device currently attempts to set the default BAR addresses to the
values shown in the datasheet, but this doesn't work for 2 reasons: firstly
BARS 1-4 do not set the bottom 2 bits to PCI_BASE_ADDRESS_SPACE_IO, and
secondly the initial PCI bus reset clears the values of all PCI device BARs
after the device itself has been reset.
Remove the setting of the default BAR addresses from via_ide_reset() to ensure
there is no doubt that these values are never exposed to the guest.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <
20231116103355.588580-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark Cave-Ayland [Thu, 16 Nov 2023 10:33:53 +0000 (10:33 +0000)]
ide/pci: introduce pci_ide_update_mode() function
This function reads the value of the PCI_CLASS_PROG register for PCI IDE
controllers and configures the PCI BARs and/or IDE ioports accordingly.
In the case where we switch to legacy mode, the PCI BARs are set to return zero
(as suggested in the "PCI IDE Controller" specification), the legacy IDE ioports
are enabled, and the PCI interrupt pin cleared to indicate legacy IRQ routing.
Conversely when we switch to native mode, the legacy IDE ioports are disabled
and the PCI interrupt pin set to indicate native IRQ routing. The contents of
the PCI BARs are unspecified, but this is not an issue since if a PCI IDE
controller has been switched to native mode then its BARs will need to be
programmed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <
20231116103355.588580-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark Cave-Ayland [Thu, 16 Nov 2023 10:33:52 +0000 (10:33 +0000)]
ide/ioport: move ide_portio_list[] and ide_portio_list2[] definitions to IDE core
These definitions are present in ioport.c which is currently only available when
CONFIG_IDE_ISA is enabled. Move them to the IDE core so that they can be made
available to PCI IDE controllers that support switching to legacy mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <
20231116103355.588580-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 15 Nov 2023 17:20:12 +0000 (18:20 +0100)]
iotests: Test two stream jobs in a single iothread
This tests two parallel stream jobs that will complete around the same
time and run on two different disks in the same iothreads. It is loosely
based on the bug report at https://issues.redhat.com/browse/RHEL-1761.
For me, this test hangs reliably with the originally reported bug in
blk_remove_bs(). After fixing it, it intermittently hangs for the bugs
fixed after it, missing AioContext unlocking in bdrv_graph_wrunlock()
and in stream_prepare(). The deadlocks seem to happen more frequently
when the test directory is on tmpfs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <
20231115172012.112727-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 15 Nov 2023 17:20:11 +0000 (18:20 +0100)]
stream: Fix AioContext locking during bdrv_graph_wrlock()
In stream_prepare(), we need to temporarily drop the AioContext lock
that job_prepare_locked() took for us while calling the graph write lock
functions which can poll.
All block nodes related to this block job are in the same AioContext, so
we can pass any of them to bdrv_graph_wrlock()/ bdrv_graph_wrunlock().
Unfortunately, the one that we picked is base, which can be NULL - and
in this case the AioContext lock is not released and deadlocks can
occur.
Fix this by passing s->target_bs, which is never NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <
20231115172012.112727-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 15 Nov 2023 17:20:10 +0000 (18:20 +0100)]
block: Fix deadlocks in bdrv_graph_wrunlock()
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <
20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 15 Nov 2023 17:20:09 +0000 (18:20 +0100)]
block: Fix bdrv_graph_wrlock() call in blk_remove_bs()
While not all callers of blk_remove_bs() are correct in this respect,
the assumption in the function is that callers hold the AioContext lock
of the BlockBackend (this is required by the drain calls in it).
In order to avoid deadlock in the nested event loop, bdrv_graph_wrlock()
has then to be called with the root BlockDriverState as its parameter
instead of NULL, so that this AioContext lock is temporarily dropped.
Fixes: https://issues.redhat.com/browse/RHEL-1761
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <
20231115172012.112727-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Niklas Cassel [Wed, 8 Nov 2023 22:26:57 +0000 (23:26 +0100)]
hw/ide/ahci: fix legacy software reset
Legacy software contains a standard mechanism for generating a reset to a
Serial ATA device - setting the SRST (software reset) bit in the Device
Control register.
Serial ATA has a more robust mechanism called COMRESET, also referred to
as port reset. A port reset is the preferred mechanism for error
recovery and should be used in place of software reset.
Commit
e2a5d9b3d9c3 ("hw/ide/ahci: simplify and document PxCI handling")
improved the handling of PxCI, such that PxCI gets cleared after handling
a non-NCQ, or NCQ command (instead of incorrectly clearing PxCI after
receiving anything - even a FIS that failed to parse, which should NOT
clear PxCI, so that you can see which command slot that caused an error).
However, simply clearing PxCI after a non-NCQ, or NCQ command, is not
enough, we also need to clear PxCI when receiving a SRST in the Device
Control register.
A legacy software reset is performed by the host sending two H2D FISes,
the first H2D FIS asserts SRST, and the second H2D FIS deasserts SRST.
The first H2D FIS will not get a D2H reply, and requires the FIS to have
the C bit set to one, such that the HBA itself will clear the bit in PxCI.
The second H2D FIS will get a D2H reply once the diagnostic is completed.
The clearing of the bit in PxCI for this command should ideally be done
in ahci_init_d2h() (if it was a legacy software reset that caused the
reset (a COMRESET does not use a command slot)). However, since the reset
value for PxCI is 0, modify ahci_reset_port() to actually clear PxCI to 0,
that way we can avoid complex logic in ahci_init_d2h().
This fixes an issue for FreeBSD where the device would fail to reset.
The problem was not noticed in Linux, because Linux uses a COMRESET
instead of a legacy software reset by default.
Fixes:
e2a5d9b3d9c3 ("hw/ide/ahci: simplify and document PxCI handling")
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-ID: <
20231108222657.117984-1-nks@flawful.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
David Woodhouse [Thu, 9 Nov 2023 15:21:13 +0000 (15:21 +0000)]
hw/xen: clean up xen_block_find_free_vdev() to avoid Coverity false positive
Coverity couldn't see that nr_existing was always going to be zero when
qemu_xen_xs_directory() returned NULL in the ENOENT case (CID
1523906).
Perhaps more to the point, neither could Peter at first glance. Improve
the code to hopefully make it clearer to Coverity and human reviewers
alike.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Thu, 9 Nov 2023 11:23:54 +0000 (11:23 +0000)]
vl: disable default serial when xen-console is enabled
If a Xen console is configured on the command line, do not add a default
serial port.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Stefan Hajnoczi [Tue, 21 Nov 2023 11:25:14 +0000 (06:25 -0500)]
Merge tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
UI: fixes for 8.2-rc1
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmVciOwcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5VtiD/oDEfDSwTxkAD6TMFoY
# n2XlzrElTAwYl0lgzzWHrdfoR2vtplIz3gK7u7MCa+rjUMowZbV3EBrMYDMoMWVU
# NkuUeSZsHYuXjaKt/nCqnmxklmq0tGN9NOwdOD1V++u257qbkUSl2w7/K0xEohAs
# NAeF3wWoCArQyjLD4K6LVsMe9IMrOP1VyGYrKBKQ91xpsuagkrjJt8RnO9MwodNs
# 8a65HRKq7HPXvMqZF7v4HgZ2pa1vrWZv4zVTraUBHaW9XpdIoiAd2+WeshjuawhO
# G6nQFpHVnQb8FBLrg+f5RItH+CjxhGvBa4DZmuGl1Y3s/fXN2N5QpUNIBqhgtE4P
# fZ+iXIpyE8sqj0TThnusszgBGWKadVjQJ8nVEVTKHzXtIa2mthF2MyY/EgnR4zQa
# 0H0YiE0SXYvoHxaErkvAfdt75OH0JBhiDcclFb1axFY2dhcgMuM7q7CR5HeO4fRd
# UEvLb8K7TLPtBGBxH5Z9z+ecxN6jIIqetosbbWFAfuIbd+at64AMh2N/MYZk2Chy
# 7E6ZGqNb8htOo2R5MitijpTm48vTs0gGjmyq7RHifG/yDHSUrPLrOgDkSC3IKY7y
# Xc9aK6fqm0l6LTLDbmZhM/znoc/1TErw/T3S4rqky0wvFTpuhP29vwd8WuyQ1ZpS
# viNCue6q0tScUz179wKEfYfyag==
# =o08n
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 05:39:40 EST
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
ui/pixman-minimal.h: fix empty allocation
vl: add missing display_remote++
ui/console: fix default VC when there are no display
ui: use "vc" chardev for dbus, gtk & spice-app
vl: revert behaviour for -display none
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 11:24:53 +0000 (06:24 -0500)]
Merge tag 'pull-target-arm-
20231121' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
* Fix SME FMOPA (16-bit), BFMOPA
* hw/core/machine: Constify MachineClass::valid_cpu_types[]
* stm32f* machines: Report error when user asks for wrong CPU type
* hw/arm/fsl-imx: Do not ignore Error argument
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVchLYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kHMD/47tKxzrsXc6+V9esRQGi2H
# 1hAgLBwglEdxLXokF+Di41sh/fvK7wYVXO/hiWlq+9h3kG3D/u1N5r1TdMPMUb9j
# 4Sg3rOejn7nzkxVZ6MZ/K/1j84C9bfrt4sboVHZVRvWuvbiyuTuivEr4IqLYO4x3
# AIwhFMQ5gbNrmClZh/DBxj0keO13cp63Fg2JSSICdi+1Dw9rRXTyhJloMu1omeqc
# k/BXzjSeNXpLSMyGWBR3uaPcJBaGC1xnz3Z1V7fUY1EYD2Cu1oo5lEZ9aNO5t30d
# XW/qVGLa3b1Cb7WuEO247RnU3N2oZotozjFtdj/8IQoYWspM9RHyipEimUlegVdO
# 3fpu8QGsN1ljNiwjdk0i6OwS7SGxcPtteFOaqEf/Yogj4EOKTn/Rx5TT4vJ5DhmI
# 2w/9J15JWDIE1paNwecuFWbxCOOzSsOtSxzuyLSZDU3GlNfJ4zoF6YboROLYfejy
# NXZABFhGd/0ykX7r0VY1GGYXUQ+akv6q+VDmVZCP9gMiRUiqmFPwMLMLlcuHb8G5
# 8UztN5SvOG2EYXj28Zx0BnGCNiGdI15rWMb0veqAtbnn3yEdltW3O475BAhZ0PB7
# OVpLWnXwmWURm/BGlwb1PH5s3kgWgzOebcBgcnCftwFQ8EedQAQDA5FmT+nK5SfV
# VoOf89PngTubU6B3BOfeBw==
# =thIa
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 05:21:42 EST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-
20231121' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm/fsl-imx: Do not ignore Error argument
hw/arm/stm32f100: Report error when incorrect CPU is used
hw/arm/stm32f205: Report error when incorrect CPU is used
hw/arm/stm32f405: Report error when incorrect CPU is used
hw/core/machine: Constify MachineClass::valid_cpu_types[]
target/arm: Fix SME FMOPA (16-bit), BFMOPA
hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
target/arm: enable FEAT_RNG on Neoverse-N2
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 11:24:28 +0000 (06:24 -0500)]
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJlXF+GAAoJEO8Ells5jWIROT0H/RGk64ds4eiKskWxwG9p8K8s
# wCLdgadf/PRnKmMLR3i5gMX87Db83nUtX/tEgoNxSGuvTdK/JRuqf2oMLv5AOF27
# 6573reJW1z0Ho9Se5JW+DPI18hX7YzqwyJQ9QslGOSRXJb20O4iC2rICfI8MeFsW
# tBTsBcJ4qwsVK4nqY/3Tz57lhZLF2xYZtdgvxS4urqg/PrcbAMq8SSB8cq7tjUUs
# sgDMQQx4n/r8wlBJE1nnvF/NxtLyTj/rrS9J1rF7ztp/suea/vHxM3t9vTqjLSlY
# TyFORcfSCK2edp2+QwARJTTU9FlnuSwf28Pnm2lMQjp5HjBO20bpCBIWGQl6C9A=
# =T88Y
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 02:43:02 EST
# gpg: using RSA key
EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
net: do not delete nics in net_cleanup()
net: Update MemReentrancyGuard for NIC
net: Provide MemReentrancyGuard * to qemu_new_nic()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 11:24:02 +0000 (06:24 -0500)]
Merge tag 'pull-ppc-
20231121' of https://github.com/legoater/qemu into staging
ppc queue:
* PNV I2C fixes
* VSX instruction fix when converting floating point to integer values
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVcZ18ACgkQUaNDx8/7
# 7KG1GBAAopdIWc33pY1kaJlHxXDDtTxShWT384r62unPO0vaDtvmlLBvD0kTRIzk
# E6OcWeGS/L2D03nI127o5Y677koL20TlOpsR4fZdOwbQUSSVTMsLN5m8Rqvu4Ptx
# zA8t/Oio+RTxkZ1SHRuEQNC5EWzFklm5R95zyvLEAbMdJ44thlXyo9KgWe8XoBBV
# tkreEzWvv4F4Nf7nZYnxvOIHsi/8No0bMMjBNGC/v+svpayuaWmsCP4/4vmVRYRP
# 28R6uMooo9xu0X6oBzqbAV6y6XFSP8pwsvVPd1yAbFhS3w2qw18VpWoMUl2UkVGx
# ZNNHjt3HPtGAEtnWAdvzVS8sFi929pHf2v5/h8gEhfZ2e4NVS1zJj3K3OqJgWfEB
# XjiIO4NF4gnbXKIlvZX8m5RqdtxbdKx7BVmJtlzJd7IDERRLe0cNSCZ06s/GcICi
# AHtxhyA5GGWs2HDQwkOimwDOholjjVbz/sIcHLCpm/jyxcdk9VwE6hBO/9nTcntg
# IaQ/kWHlbQgTNXNuFDBwiOMuEQ5G4bb6sdqH+CWZU/owFqgXHIlki7oneX6SB09T
# GUyVwScLWlspCJRpX/y4ubyfGB3ZqAQ9REita4YIMveDvNU83LS344MRrBpzQ+ZI
# 1yCoHdBsNUkpr9dN/uwkjDSBlDoyWJ2TAgQHsprNUD04ChML7Fs=
# =qx4p
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 03:16:31 EST
# gpg: using RSA key
A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-
20231121' of https://github.com/legoater/qemu:
ppc/pnv: Fix PNV I2C invalid status after reset
ppc/pnv: PNV I2C engines assigned incorrect XSCOM addresses
target/ppc: Fix bugs in VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros
ppc/pnv: Fix potential overflow in I2C model
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 21 Nov 2023 11:23:21 +0000 (06:23 -0500)]
Merge tag 'pull-loongarch-
20231121' of https://gitlab.com/gaosong/qemu into staging
fixes tcg_out_mov aborted.
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZVwXJgAKCRBAov/yOSY+
# 30HKBAC4+3oAaMqRDEBTlYT0oHmU3IVRv7Pkuht72YZ57qQwjq21jMpxRdeuAAT2
# McGzDIH/IbF0qG1HBako00jiwgGpx90aBU0KwOVgBjyjvUK2VXE268UoRs+WYVG/
# 7ljOHEnpvwJVTquAtDNFZIw0EFwiF75MP2rKvrSG8KmmrSu4hg==
# =oHNA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 20 Nov 2023 21:34:14 EST
# gpg: using RSA key
B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-
20231121' of https://gitlab.com/gaosong/qemu:
tcg/loongarch64: Fix tcg_out_mov() Aborted
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manos Pitsidianakis [Tue, 21 Nov 2023 09:38:39 +0000 (11:38 +0200)]
ui/pixman-minimal.h: fix empty allocation
In the minimal pixman API stub that is used when the real pixman
dependency is missing a NULL dereference happens when
virtio-gpu-rutabaga allocates a pixman image with bits = NULL and
rowstride_bytes = zero. A buffer of rowstride_bytes * height is
allocated which is NULL. However, in that scenario pixman calculates a
new stride value based on given width, height and format size.
This commit adds a helper function that performs the same logic as
pixman.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231121093840.
2121195-1-manos.pitsidianakis@linaro.org>
Marc-André Lureau [Fri, 17 Nov 2023 11:15:13 +0000 (15:15 +0400)]
vl: add missing display_remote++
We should also consider -display vnc= as setting up a remote display,
and not attempt to add another default one.
The display_remote++ in qemu_setup_display() isn't necessary at this
point, but is there for completeness and further usages of the variable.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1988
Fixes: commit
484629fc81 ("vl: simplify display_remote logic ")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Marc-André Lureau [Wed, 8 Nov 2023 13:25:22 +0000 (17:25 +0400)]
ui/console: fix default VC when there are no display
When display is "none", we may still have remote displays (I think it
would be simpler if VNC/Spice were regular display btw). Return the
default VC then, and set them up to fix a regression when using remote
display and it used the TTY instead.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1989
Fixes: commit
1bec1cc0d ("ui/console: allow to override the default VC")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Marc-André Lureau [Fri, 17 Nov 2023 10:55:07 +0000 (14:55 +0400)]
ui: use "vc" chardev for dbus, gtk & spice-app
Those display have their own implementation of "vc" chardev, which
doesn't use pixman. They also don't implement the width/height/cols/rows
options, so qemu_display_get_vc() should return a compatible argument.
This patch was meant to be with the pixman series, when the "vc" field
was introduced. It fixes a regression where VC are created on the
tty (or null) instead of the display own "vc" implementation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Marc-André Lureau [Fri, 17 Nov 2023 14:03:16 +0000 (18:03 +0400)]
vl: revert behaviour for -display none
Commit
1bec1cc0d ("ui/console: allow to override the default VC") changed
the behaviour of the "-display none" option, so that it now creates a
QEMU monitor on the terminal. "-display none" should not be tangled up
with whether we create a monitor or a serial terminal; it should purely
and only disable the graphical window. Changing its behaviour like this
breaks command lines which, for example, use semihosting for their
output and don't want a graphical window, as they now get a monitor they
never asked for.
It also breaks the command line we document for Xen in
docs/system/i386/xen.html:
$ ./qemu-system-x86_64 --accel kvm,xen-version=0x40011,kernel-irqchip=split \
-display none -chardev stdio,mux=on,id=char0,signal=off -mon char0 \
-device xen-console,chardev=char0 -drive file=${GUEST_IMAGE},if=xen
qemu-system-x86_64: cannot use stdio by multiple character devices
qemu-system-x86_64: could not connect serial device to character backend
'stdio'
When qemu is compiled without PIXMAN, by default the serials aren't
muxed with the monitor anymore on stdio. The serials are redirected to
"null" instead, and the monitor isn't set up.
Fixes: commit
1bec1cc0d ("ui/console: allow to override the default VC")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Wed, 15 Nov 2023 17:24:35 +0000 (17:24 +0000)]
net: do not delete nics in net_cleanup()
In net_cleanup() we only need to delete the netdevs, as those may have
state which outlives Qemu when it exits, and thus may actually need to
be cleaned up on exit.
The nics, on the other hand, are owned by the device which created them.
Most devices don't bother to clean up on exit because they don't have
any state which will outlive Qemu... but XenBus devices do need to clean
up their nodes in XenStore, and do have an exit handler to delete them.
When the XenBus exit handler destroys the xen-net-device, it attempts
to delete its nic after net_cleanup() had already done so. And crashes.
Fix this by only deleting netdevs as we walk the list. As the comment
notes, we can't use QTAILQ_FOREACH_SAFE() as each deletion may remove
*multiple* entries, including the "safely" saved 'next' pointer. But
we can store the *previous* entry, since nics are safe.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 1 Jun 2023 03:18:59 +0000 (12:18 +0900)]
net: Update MemReentrancyGuard for NIC
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
This implementation follows what bottom half does, but it does not add
a tracepoint for the case that the network device backend started
delivering a packet to a device which is already engaging in I/O. This
is because such reentrancy frequently happens for
qemu_flush_queued_packets() and is insignificant.
Fixes: CVE-2023-3019
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 1 Jun 2023 03:18:58 +0000 (12:18 +0900)]
net: Provide MemReentrancyGuard * to qemu_new_nic()
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Glenn Miles [Tue, 14 Nov 2023 19:56:55 +0000 (13:56 -0600)]
ppc/pnv: Fix PNV I2C invalid status after reset
The PNV I2C Controller was clearing the status register
after a reset without repopulating the "upper threshold
for I2C ports", "Command Complete" and the SCL/SDA input
level fields.
Fixed this for resets caused by a system reset as well
as from writing to the "Immediate Reset" register.
Fixes:
263b81ee15af ("ppc/pnv: Add an I2C controller model")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Glenn Miles [Tue, 14 Nov 2023 19:56:54 +0000 (13:56 -0600)]
ppc/pnv: PNV I2C engines assigned incorrect XSCOM addresses
The PNV I2C engines for power9 and power10 were being assigned a base
XSCOM address that was off by one I2C engine's address range such
that engine 0 had engine 1's address and so on. The xscom address
assignment was being based on the device tree engine numbering, which
starts at 1. Rather than changing the device tree numbering to start
with 0, the addressing was changed to be based on the existing device
tree numbers minus one.
Fixes:
1ceda19c28a1 ("ppc/pnv: Connect PNV I2C controller to powernv10)
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
John Platts [Fri, 10 Nov 2023 18:41:42 +0000 (18:41 +0000)]
target/ppc: Fix bugs in VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit
c3f24257e3c0.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes:
c3f24257e3c0 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Thu, 9 Nov 2023 17:15:25 +0000 (18:15 +0100)]
ppc/pnv: Fix potential overflow in I2C model
Coverity warns that "i2c_bus_busy(i2c->busses[i]) << i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
While we are at it, introduce a PNV_I2C_MAX_BUSSES constant and check
the number of busses at realize time.
Fixes: Coverity CID
1523918
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Song Gao [Mon, 20 Nov 2023 06:59:16 +0000 (14:59 +0800)]
tcg/loongarch64: Fix tcg_out_mov() Aborted
On LoongArch host, we got an Aborted from tcg_out_mov().
qemu-x86_64 configure with '--enable-debug'.
> (gdb) b /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> Breakpoint 1 at 0x2576f0: file /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc, line 312.
> (gdb) run hello
[...]
> Thread 1 "qemu-x86_64" hit Breakpoint 1, tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2,
> arg=TCG_REG_V0) at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> 312 g_assert_not_reached();
> (gdb) bt
> #0 tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2, arg=TCG_REG_V0)
> at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> #1 0x000000aaaad0fee0 in tcg_reg_alloc_mov (s=0xaaaae91760 <tcg_init_ctx>, op=0xaaaaf67c20) at ../tcg/tcg.c:4632
> #2 0x000000aaaad142f4 in tcg_gen_code (s=0xaaaae91760 <tcg_init_ctx>, tb=0xffe8030340 <code_gen_buffer+197328>,
> pc_start=
4346094) at ../tcg/tcg.c:6135
[...]
> (gdb) c
> Continuing.
> **
> ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
> Bail out! ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
>
> Thread 1 "qemu-x86_64" received signal SIGABRT, Aborted.
> 0x000000fff7b1c390 in raise () from /lib64/libc.so.6
> (gdb) q
Fixes:
16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20231120065916.374045-1-gaosong@loongson.cn>
Philippe Mathieu-Daudé [Mon, 20 Nov 2023 11:51:15 +0000 (12:51 +0100)]
hw/arm/fsl-imx: Do not ignore Error argument
Both i.MX25 and i.MX6 SoC models ignore the Error argument when
setting the PHY number. Pick &error_abort which is the error
used by the i.MX7 SoC (see commit
1f7197deb0 "ability to change
the FEC PHY on i.MX7 processor").
Fixes:
74c1330582 ("ability to change the FEC PHY on i.MX25 processor")
Fixes:
a9c167a3c4 ("ability to change the FEC PHY on i.MX6 processor")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231120115116.76858-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 17 Nov 2023 07:17:04 +0000 (08:17 +0100)]
hw/arm/stm32f100: Report error when incorrect CPU is used
The 'stm32vldiscovery' machine ignores the CPU type requested by
the command line. This might confuse users, since the following
will create a machine with a Cortex-M3 CPU:
$ qemu-system-aarch64 -M stm32vldiscovery -cpu neoverse-n1
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-aarch64 -M stm32vldiscovery -cpu neoverse-n1
qemu-system-aarch64: Invalid CPU type: neoverse-n1-arm-cpu
The valid types are: cortex-m3-arm-cpu
Since the SoC family can only use Cortex-M3 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id:
20231117071704.35040-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 17 Nov 2023 07:17:03 +0000 (08:17 +0100)]
hw/arm/stm32f205: Report error when incorrect CPU is used
The 'netduino2' machine ignores the CPU type requested by the
command line. This might confuse users, since the following will
create a machine with a Cortex-M3 CPU:
$ qemu-system-arm -M netduino2 -cpu cortex-a9
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-arm -M netduino2 -cpu cortex-a9
qemu-system-arm: Invalid CPU type: cortex-a9-arm-cpu
The valid types are: cortex-m3-arm-cpu
Since the SoC family can only use Cortex-M3 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id:
20231117071704.35040-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 17 Nov 2023 07:17:02 +0000 (08:17 +0100)]
hw/arm/stm32f405: Report error when incorrect CPU is used
Both 'netduinoplus2' and 'olimex-stm32-h405' machines ignore the
CPU type requested by the command line. This might confuse users,
since the following will create a machine with a Cortex-M4 CPU:
$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f
qemu-system-aarch64: Invalid CPU type: cortex-r5f-arm-cpu
The valid types are: cortex-m4-arm-cpu
Since the SoC family can only use Cortex-M4 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id:
20231117071704.35040-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gavin Shan [Fri, 17 Nov 2023 07:17:01 +0000 (08:17 +0100)]
hw/core/machine: Constify MachineClass::valid_cpu_types[]
Constify MachineClass::valid_cpu_types[i], as suggested by Richard
Henderson.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231117071704.35040-2-philmd@linaro.org
[PMD: Constify HPPA machines,
restrict valid_cpu_types to machine_class_init() handlers]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 17 Nov 2023 19:31:35 +0000 (11:31 -0800)]
target/arm: Fix SME FMOPA (16-bit), BFMOPA
Perform the loop increment unconditionally, not nested
within the predication.
Cc: qemu-stable@nongnu.org
Fixes:
3916841ac75 ("target/arm: Implement FMOPA, FMOPS (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1985
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231117193135.
1180657-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ben Dooks [Thu, 16 Nov 2023 17:28:18 +0000 (17:28 +0000)]
hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
The ICC_PMR_ELx and ICV_PMR_ELx bit masks returned from
ic{c,v}_fullprio_mask should technically also remove any
bit above 7 as these are marked reserved (read 0) and should
therefore should not be written as anything other than 0.
This was noted during a run of a proprietary test system and
discused on the mailing list [1] and initially thought not to
be an issue due to RES0 being technically allowed to be
written to and read back as long as the implementation does
not use the RES0 bits. It is very possible that the values
are used in comparison without masking, as pointed out by
Peter in [2], if (cs->hppi.prio >= cs->icc_pmr_el1) may well
do the wrong thing.
Masking these values in ic{c,v}_fullprio_mask() should fix
this and prevent any future problems with playing with the
values.
[1]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00607.html
[2]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00737.html
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Message-id:
20231116172818.792364-1-ben.dooks@codethink.co.uk
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marcin Juszkiewicz [Tue, 14 Nov 2023 10:34:43 +0000 (11:34 +0100)]
target/arm: enable FEAT_RNG on Neoverse-N2
I noticed that Neoverse-V1 has FEAT_RNG enabled so let enable it also on
Neoverse-N2.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20231114103443.
1652308-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Mon, 20 Nov 2023 10:25:19 +0000 (05:25 -0500)]
Merge tag '
20231119-xtensa-1' of https://github.com/OSLL/qemu-xtensa into staging
target/xtensa fixes for v8.2:
- fix signal delivery in FDPIC
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmVaXU4THGpjbXZia2Jj
# QGdtYWlsLmNvbQAKCRBR+cyR+D+gRF13EACXNP0MPn2iWqxLPvxW9mDXaQu9cSlJ
# BcAlHKbi21CDdqLYpyMoenRONtHMDKjEhR4Atv+DRhc2qQYKNogLgCM1PtGkb6+z
# rNS6HBaUFsAKovS03JGcBDDYWS97bfN1AQRrrEzCV+SKq5Gq8Tr23LSgFHred0hS
# OlGmb7/S+uMh1Uo+rqLKFvSkcWLyaPxOhw1BoaNWdifSotfRwK++PZUvv7slQk+/
# J2ePbjU/ZTBTmumn0tg8BP66UHmGQ+TcvGOdD0m6qlQoq5XaqAYgNb6/Cm16xIPJ
# GQtmB1m74Dl1cQGYXlg3YFGluOJGidkT6In6dYzOEzjvOg9Rku+9bdCxIyRgQK7g
# gXcQJaEdpBiex3c21XWhMfjpM1pQruRgIQ3xqYETBMKXXqvbgYdUT09JpuaoTUkP
# oTymnBVL+9hyrlhPWXzn8M6IPUlyT7Hmnb0uVmHfTi8UNBhiGBRSN4x3CMDNi9oL
# ziE3xKgEkii9WEY+qSCodLMvLJBzShpKTjmUhfJMYdK07uVzazhGhmtQ8qSi3Rm7
# 6hDfnnBwrnX/CBE1IMca280Aax3TMf8Sn1pJqsTHwlNFb3O5vcixRajJw7xNprkP
# 5CcS+G2fRK7JIb18FI2aBf7DXD4kfasF8UAaiyQfkmD1/LITSGiDKfKFvaqjA7Ln
# wVrNbrGvDRvdEw==
# =sZPo
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 19 Nov 2023 14:09:02 EST
# gpg: using RSA key
2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [unknown]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* tag '
20231119-xtensa-1' of https://github.com/OSLL/qemu-xtensa:
linux-user: xtensa: fix signal delivery in FDPIC
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 20 Nov 2023 10:24:08 +0000 (05:24 -0500)]
Merge tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
HPPA64-PATCHES-for-8.2
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
# X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
# x70WR8HrtkadsUddgSGzFRChaVb0/wI=
# =Sapq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Nov 2023 15:04:15 EST
# gpg: using EDDSA key
BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
disas/hppa: Show hexcode of instruction along with disassembly
target/hppa: Fix 64-bit SHRPD instruction
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 20 Nov 2023 10:23:49 +0000 (05:23 -0500)]
Merge tag 'pull-error-2023-11-17' of https://repo.or.cz/qemu/armbru into staging
Error reporting patches for 2023-11-17
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmVXLq8SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTBIsP/3vTjS2QJ2JdjgZV7ARGyfAxsPbG4TS2
# JHqFsF37vY5u+gYjcBJsmDY8YBpYWQFkOYJ8RJtCdedOnW2gML88vc3XKcUrUc7T
# ebN8KnpA8mx5nr0SMGD+/w72xZl917lGFhXRqazvS2i0dbJvuAsacoo300oIZncx
# 5480GiJpNc/QBUdU9ywFWwQOVzJynn32e1OFWLmbL2xH+kcgMbgWgrEMQUb0D99+
# J9PjKCJxVlJFKEjph7iLCahID5V1gjJTzp3iESOWbO7BTFuKJZ8E510oXd1ng86c
# JLOEcu4vhC4JNvMx5R31nVz4LXfQD8Hf1pSVL64gTybVq3bEMhv/wLUuG/AcPIuL
# t1GxRhGqY2yXbnP3GfP9xNhFps0uLmJF7g5Q/ao2sEwOiPmGmNKcK7xV6OkYJdIr
# isbb+bot19NN+B7r1ZWkb7BEhM99PtHZtsrmnPZ7T19CX/cy2k0D0W78nqJE0AJU
# sBhwuntou+DvBbLB3KD33OcE0UI93IxICaqR56q4lwydYOQ4p8VCTRI1aoDrZpPx
# Q+kMs+sy3q7CGMKEScnb+HeA8KuvKFGqw3XKJwYQsTITRd+NdWnQ7dKAC2J2sRvO
# DRGhUEmOiaDv3HdmToV3owfLsH9raK6Oh8KYjxiOoiJ1Tb0+sZvxayemQ97mRVuJ
# r+yle/BX1ODY
# =7QAS
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Nov 2023 04:13:19 EST
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-error-2023-11-17' of https://repo.or.cz/qemu/armbru:
target/i386/cpu: Improve error message for property "vendor"
balloon: Fix a misleading error message
net: Fix a misleading error message
ui/qmp-cmds: Improve two error messages
qga: Improve guest-exec-status error message
hmp: Improve sync-profile error message
spapr/pci: Correct "does not support hotplugging error messages
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 20 Nov 2023 10:23:30 +0000 (05:23 -0500)]
Merge tag 'pull-request-2023-11-16' of https://gitlab.com/thuth/qemu into staging
* Fix the avocado tests for running with Python 3.12
* Add some asset hashes to silence warnings
* Fix the broken reverse_debugging test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVWWRARHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWOnQ/8DdnPGlXrOl+4QzRaJQovmmS04OZuiWtB
# TpOd/cWQMsKKX7YGq9uAuLBa7zYXyHZLmOLcSYYKYzcFnxX155TgtXDqZXJb7k8D
# 9rGtF8vgGokT3VmsWW6w5LNa1Pg5FPd56+l8Kus7iqpHbxPzMybP/HFGcuCdeMW9
# kFaLCvtP7LAPM9k8z6Nw9vbQ5aUx2J9fwSgWhoMYmVO72A7HUZ0KA+lti/3xvhKy
# zcYJ4PxFaSK4SQwG8yfhmwqCw3QjeH+Se8gxvqR6nmKW9wCA3FdmUFaQPQQF6bq+
# AEUPBJpa+eZA38tA9rts6VSVGgrg5IA9rPYFc8ZIYn6dMgkAqR7snvcphyUAijJ9
# oqS72BJkw6KZ+52QyZ4O2zG4lkgi/uHp0qhmAr/FHDLkmetTjyQ4vA5dm76V5B2G
# EAPzNZct0RluD0hk2qIKXRC4FN4HFaEAL4EpDjCuymTArsEhSf9I8IEMu9V4CVHs
# Jp2c/0EZNCcTeqc7xr+lO+JFMd1kbB2N9yApFrbQpaIsZQkSF/oNtFZ8h8n/DhNJ
# Ojp9hSUkb37eBZuRA5wsDAo9WI1ADV1n7Ku7ao9aJ84iozcAvOjk2T+NXkeKJEdW
# br8RCqpm0yiB9W7X9WUa5uQd69pdKX4ILW1ekdrG02CuxbIE42Jx5WYdzUrXDUIz
# hzD/QPF3TsI=
# =IcSd
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Nov 2023 13:01:52 EST
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-11-16' of https://gitlab.com/thuth/qemu:
tests/avocado: Enable reverse_debugging.py tests in gitlab CI
tests/avocado: reverse_debugging drain console to prevent hang
tests/avocado/mem-addr-space-check: Replace assertEquals() for Python 3.12
tests/avocado/replay_kernel: Mark the test_x86_64_pc as flaky
tests/avocado: Make fetch_asset() unconditionally require a crypto hash
tests/avocado/multiprocess: Add asset hashes to silence warnings
tests/avocado/intel_iommu: Add asset hashes to avoid warnings
tests/avocado/virtio-gpu: Fix test_vhost_user_vga_virgl for edid support
tests/avocado: Replace assertRegexpMatches() for Python 3.12 compatibility
tests/avocado: Replace assertEquals() for Python 3.12 compatibility
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 20 Nov 2023 10:22:30 +0000 (05:22 -0500)]
Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging
trivial patches for 2023-11-16
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmVVxz4PHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZI+cH+wexpGPHmmWHaA0moo+1MZPC3pbEvOXq184b
# oeGRUidq89380DzsxkIxrDn98KisKnIX3oGZ56Q394Ntg7J2xyFN/KsvQhzpElSb
# 01Ws90NVoHIXoXZKNIOFZXkqOLCB+kwqZ1PFiYwALEJkEPBfpV40dTWuyCnxh1D8
# lKHtk5bLKzDbTmDYYfnZ7zkP6CLMhRH7A7evdb/4+W+phbqTHeKbSgq8QhNvVX8n
# 38yzPTQPlMyXHw7Psio62N7wz86wEiGkYELud1nPPlA902paM5FHMdjYBohm/ZCM
# 4E12gzMg4SgwBIsWoyE/1tUAjyJXeChocxOVLFqDXXaiYgomAh0=
# =x0bq
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Nov 2023 02:39:42 EST
# gpg: using RSA key
7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (27 commits)
util/range.c: spelling fix: inbetween
util/filemonitor-inotify.c: spelling fix: kenel
tests/qtest/ufs-test.c: spelling fix: tranfer
tests/qtest/migration-test.c: spelling fix: bandwith
target/riscv/cpu.h: spelling fix: separatly
include/hw/virtio/vhost.h: spelling fix: sate
include/hw/hyperv/dynmem-proto.h: spelling fix: nunber, atleast
include/block/ufs.h: spelling fix: setted
hw/net/cadence_gem.c: spelling fixes: Octects
hw/mem/memory-device.c: spelling fix: ontaining
contrib/vhost-user-gpu/virgl.c: spelling fix: mesage
migration/rdma.c: spelling fix: asume
target/hppa: spelling fixes: Indicies, Truely
target/arm/tcg: spelling fixes: alse, addreses
docs/system/arm/emulation.rst: spelling fix: Enhacements
docs/devel/migration.rst: spelling fixes: doen't, diferent, responsability, recomend
docs/about/deprecated.rst: spelling fix: becase
gdbstub: spelling fix: respectivelly
hw/cxl: spelling fixes: limitaions, potentialy, intialized
linux-user: spelling fixes: othe, necesary
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Max Filippov [Fri, 10 Nov 2023 19:37:43 +0000 (11:37 -0800)]
linux-user: xtensa: fix signal delivery in FDPIC
In FDPIC signal handlers are passed around as FD pointers. Actual code
address and GOT pointer must be fetched from memory by the QEMU code
that implements kernel signal delivery functionality. This change is
equivalent to the following kernel change:
9c2cc74fb31e ("xtensa: fix signal delivery to FDPIC process")
Cc: qemu-stable@nongnu.org
Fixes:
d2796be69d7c ("linux-user: add support for xtensa FDPIC")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Helge Deller [Fri, 17 Nov 2023 10:26:02 +0000 (11:26 +0100)]
disas/hppa: Show hexcode of instruction along with disassembly
On hppa many instructions can be expressed by different bytecodes.
To be able to debug qemu translation bugs it's therefore necessary to see the
currently executed byte codes without the need to lookup the sequence without
the full executable.
With this patch the instruction byte code is shown beside the disassembly.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Helge Deller [Fri, 17 Nov 2023 10:02:39 +0000 (11:02 +0100)]
target/hppa: Fix 64-bit SHRPD instruction
When shifting the two joined 64-bit registers right, shift the upper
64-bit register to the left and the lower 64-bit register to the right
before merging them with OR.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Markus Armbruster [Tue, 31 Oct 2023 11:10:59 +0000 (12:10 +0100)]
target/i386/cpu: Improve error message for property "vendor"
Improve
$ qemu-system-x86_64 -device max-x86_64-cpu,vendor=me
qemu-system-x86_64: -device max-x86_64-cpu,vendor=me: Property '.vendor' doesn't take value 'me'
to
qemu-system-x86_64: -device max-x86_64-cpu,vendor=
0123456789abc: value of property 'vendor' must consist of exactly 12 characters
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Typo corrected]
Markus Armbruster [Tue, 31 Oct 2023 11:10:58 +0000 (12:10 +0100)]
balloon: Fix a misleading error message
The error message
{"execute": "balloon", "arguments":{"value": -1}}
{"error": {"class": "GenericError", "desc": "Parameter 'target' expects a size"}}
points to 'target' instead of 'value'. Fix:
{"error": {"class": "GenericError", "desc": "Parameter 'value' expects a size"}}
Root cause: qmp_balloon()'s parameter is named @target. Rename it to
@value to match the QAPI schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-7-armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 11:10:57 +0000 (12:10 +0100)]
net: Fix a misleading error message
The error message
$ qemu-system-x86_64 -netdev user,id=net0,ipv6-net=fec0::0/
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: Parameter 'ipv6-prefixlen' expects a number
points to ipv6-prefixlen instead of ipv6-net. Fix:
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: parameter 'ipv6-net' expects a number after '/'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-6-armbru@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 11:10:56 +0000 (12:10 +0100)]
ui/qmp-cmds: Improve two error messages
set_password with "protocol": "vnc" supports only "connected": "keep".
Any other value is rejected with
Invalid parameter 'connected'
Improve this to
parameter 'connected' must be 'keep' when 'protocol' is 'vnc'
client_migrate_info requires "port" or "tls-port". When both are
missing, it fails with
Parameter 'port/tls-port' is missing
Improve this to
parameter 'port' or 'tls-port' is required
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Markus Armbruster [Tue, 31 Oct 2023 11:10:55 +0000 (12:10 +0100)]
qga: Improve guest-exec-status error message
When the PID passed to guest-exec-status does not exist, we report
"Invalid parameter 'pid'"
Improve this to
"PID 1234 does not exist"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-4-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Markus Armbruster [Tue, 31 Oct 2023 11:10:54 +0000 (12:10 +0100)]
hmp: Improve sync-profile error message
Improve
(qemu) sync-profile of
Error: Invalid parameter 'of'
to
Error: invalid parameter 'of', expecting 'on', 'off', or 'reset'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Markus Armbruster [Tue, 31 Oct 2023 11:10:53 +0000 (12:10 +0100)]
spapr/pci: Correct "does not support hotplugging error messages
When dynamic-reconfiguration is off, hot plug / unplug can fail with
"Bus 'spapr-pci-host-bridge' does not support hotplugging".
spapr-pci-host-bridge is a device, not a bus. Report the name of the
bus it provides instead: 'pci.0'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <
20231031111059.
3407803-2-armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Nicholas Piggin [Thu, 16 Nov 2023 11:53:54 +0000 (21:53 +1000)]
tests/avocado: Enable reverse_debugging.py tests in gitlab CI
Let's try enable reverse_debugging.py in gitlab CI.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <
20231116115354.228678-3-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nicholas Piggin [Thu, 16 Nov 2023 11:53:52 +0000 (21:53 +1000)]
tests/avocado: reverse_debugging drain console to prevent hang
Like replay_linux.py, reverse_debugging.py starts the vm with console
set but does not interact with it (e.g., with wait_for_console_pattern).
In this situation, the console should have a drainer attached so the
socket does not fill. replay_linux.py has a drainer, but it is missing
from reverse_debugging.py.
Per analysis in Link: this can cause the console socket/pipe to fill and
QEMU get stuck in qemu_chr_write_buffer, leading to strange test case
failures (ppc64 fails because it prints a lot to console in early bios).
Attaching a drainer prevents this.
Note, this commit does not fix bugs introduced by the commits referenced
in the first two Fixes: tags, but together those commits conspire to
irritate the problem and cause test case failure, which this commit
fixes.
Link: https://lore.kernel.org/qemu-devel/ZVT-bY9YOr69QTPX@redhat.com/
Fixes:
1d4796cd0083 ("python/machine: use socketpair() for console connections")
Fixes:
761a13b23946 ("tests/avocado: ppc64 reverse debugging tests for pseries and powernv")
Fixes:
be52eca30978 ("tests/acceptance: add reverse debugging test")
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <
20231116115354.228678-1-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 16 Nov 2023 06:19:56 +0000 (07:19 +0100)]
tests/avocado/mem-addr-space-check: Replace assertEquals() for Python 3.12
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <
20231116061956.14676-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 Nov 2023 15:30:19 +0000 (16:30 +0100)]
tests/avocado/replay_kernel: Mark the test_x86_64_pc as flaky
It's failing very often, so don't run this by default anymore
until it gets fixed.
Message-ID: <
20231114153019.295131-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Philippe Mathieu-Daudé [Wed, 15 Nov 2023 20:51:49 +0000 (21:51 +0100)]
tests/avocado: Make fetch_asset() unconditionally require a crypto hash
In a perfect world we'd have reproducible tests,
but then we'd be sure we run the same binaries.
If a binary artifact isn't hashed, we have no idea
what we are running. Therefore enforce hashing for
all our artifacts.
With this change, unhashed artifacts produce:
$ avocado run tests/avocado/multiprocess.py
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
ERROR: QemuBaseTest.fetch_asset() missing 1 required positional argument: 'asset_hash' (0.19 s)
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <
20231115205149.90765-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Wed, 15 Nov 2023 14:58:52 +0000 (15:58 +0100)]
tests/avocado/multiprocess: Add asset hashes to silence warnings
The multiprocess test is currently succeeding with an annoying warning:
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
WARN: Test passed but there were warnings during execution. Check
the log for details
In the log, you can find an entry like:
WARNI| No hash provided. Cannot check the asset file integrity.
Add the proper asset hashes to avoid those warnings.
Message-ID: <
20231115145852.494052-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 Nov 2023 14:35:31 +0000 (15:35 +0100)]
tests/avocado/intel_iommu: Add asset hashes to avoid warnings
The intel_iommu test is currently succeeding with annoying warnings.
Add the proper asset hashes to avoid those.
Message-ID: <
20231114143531.291820-1-thuth@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 Nov 2023 20:34:56 +0000 (21:34 +0100)]
tests/avocado/virtio-gpu: Fix test_vhost_user_vga_virgl for edid support
The "edid" feature has been added to vhost-user-gpu in commit
c06444261e20 ("contrib/vhost-user-gpu: implement get_edid feature"),
so waiting for "features: +virgl -edid" in the test does not work
anymore, it's "+edid" instead of "-edid" now!
While we're at it, move the expected string to the preceeding
exec_command_and_wait_for_pattern() instead (since waiting for
empty string here does not make too much sense).
Message-ID: <
20231114203456.319093-1-thuth@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Philippe Mathieu-Daudé [Tue, 14 Nov 2023 14:48:31 +0000 (15:48 +0100)]
tests/avocado: Replace assertRegexpMatches() for Python 3.12 compatibility
assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 14 Nov 2023 13:43:26 +0000 (14:43 +0100)]
tests/avocado: Replace assertEquals() for Python 3.12 compatibility
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <
20231114134326.287242-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Stefan Hajnoczi [Wed, 15 Nov 2023 13:05:25 +0000 (08:05 -0500)]
Merge tag 'pull-tcg-
20231114' of https://gitlab.com/rth7680/qemu into staging
accel/tcg: Forward probe size on to notdirty_write
accel/tcg: Remove CF_LAST_IO
target/sparc: Fix RETURN
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVTyVodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV91UAf/Sf304RJutaNX+85s
# 2HP31heScIsrrziDvPhZJG+gD3/Xeq9aDRCNqw7C/MhIHadarJcghTVqPuTMZ8Eg
# j3FqvSr6e+6A6VGNdg2d5CKasIYhRMHqCy94g/0fVWtnV9n/2cJPS6zIWGlxl2dT
# tJ9AK9IbkLo9b7jifUztTsllhzU8rMvxYznxr6dynJ/3V10gtcAIsc41BeHoLzob
# e8wZtuwNUtgiHBGhfEnpspK+oJaPKo2Qy1zPdBiuLadUhl066JdXeOKN9XgCuRyR
# 024dOqVwZ+UBQhcmUdJuOjAnsnJJUx29TKtmOOoTugrq+mE1xybSBiiih6EELQlj
# AYq6jg==
# =D4Wj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Nov 2023 14:24:10 EST
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-
20231114' of https://gitlab.com/rth7680/qemu:
target/sparc: Fix RETURN
accel/tcg: Forward probe size on to notdirty_write
accel/tcg: Remove CF_LAST_IO
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
util/range.c: spelling fix: inbetween
Fixes:
b439595a08d7 "range: Introduce range_inverse_array()"
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
util/filemonitor-inotify.c: spelling fix: kenel
Fixes:
2e12dd405c66 "util/filemonitor-inotify: qemu_file_monitor_watch(): assert no overflow"
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
tests/qtest/ufs-test.c: spelling fix: tranfer
Fixes:
631c872614ac "tests/qtest: Introduce tests for UFS"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
tests/qtest/migration-test.c: spelling fix: bandwith
Fixes:
17257b90be4f "tests: Add migration dirty-limit capability test"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
target/riscv/cpu.h: spelling fix: separatly
Fixes:
40336d5b1d4c "target/riscv: Add HS-mode virtual interrupt and IRQ filtering support."
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
include/hw/virtio/vhost.h: spelling fix: sate
Fixes:
4a00d5d7f4b6 "vhost: Add high-level state save/load functions"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
include/hw/hyperv/dynmem-proto.h: spelling fix: nunber, atleast
Fixes:
4f80cd2f033e "Add Hyper-V Dynamic Memory Protocol definitions"
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
include/block/ufs.h: spelling fix: setted
Fixes:
bc4e68d362ec "hw/ufs: Initial commit for emulated Universal-Flash-Storage"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
hw/net/cadence_gem.c: spelling fixes: Octects
Fixes:
c755c943aa2e "hw/net/cadence_gem: use REG32 macro for register definitions"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:11:33 +0000 (19:11 +0300)]
hw/mem/memory-device.c: spelling fix: ontaining
Fixes:
6c1b28e9e405 "memory-device: Support empty memory devices"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:10:44 +0000 (19:10 +0300)]
contrib/vhost-user-gpu/virgl.c: spelling fix: mesage
Fixes:
e3c82fe04f31 "contrib/vhost-user-gpu: add support for sending dmabuf modifiers"
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:10:13 +0000 (19:10 +0300)]
migration/rdma.c: spelling fix: asume
Fixes:
67c31c9c1af1 "migration: Don't abuse qemu_file transferred for RDMA"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:09:54 +0000 (19:09 +0300)]
target/hppa: spelling fixes: Indicies, Truely
Fixes:
bb67ec32a0bb "target/hppa: Include PSW_P in tb flags and mmu index"
Fixes:
d7553f3591bb "target/hppa: Populate an interval tree with valid tlb entries"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:09:41 +0000 (19:09 +0300)]
target/arm/tcg: spelling fixes: alse, addreses
Fixes:
179e9a3baccc "target/arm: Define new TB flag for ATA0"
Fixes:
5d7b37b5f675 "target/arm: Implement the CPY* instructions"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:09:19 +0000 (19:09 +0300)]
docs/system/arm/emulation.rst: spelling fix: Enhacements
Fixes:
c7c807f6dd6d "target/arm: Implement FEAT_Pauth2"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:08:48 +0000 (19:08 +0300)]
docs/devel/migration.rst: spelling fixes: doen't, diferent, responsability, recomend
Fixes:
593c28c02c81 "migration/doc: How to migrate when hosts have different features"
Fixes:
1aefe2ca1423 "migration/doc: Add documentation for backwards compatiblity"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:08:26 +0000 (19:08 +0300)]
docs/about/deprecated.rst: spelling fix: becase
Fixes:
864128df465a "migration: Deprecate old compression method"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:08:08 +0000 (19:08 +0300)]
gdbstub: spelling fix: respectivelly
Fixes:
761e3c10881b "gdbstub: fixes cases where wrong threads were reported to GDB on SIGINT"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:06:48 +0000 (19:06 +0300)]
hw/cxl: spelling fixes: limitaions, potentialy, intialized
Fixes:
388d6b574e28 "hw/cxl: Use switch statements for read and write of cachemem registers"
Fixes:
3314efd276ad "hw/cxl/mbox: Add Physical Switch Identify command."
Fixes:
004e3a93b814 "hw/cxl: Add tunneled command support to mailbox for switch cci."
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:07:15 +0000 (19:07 +0300)]
linux-user: spelling fixes: othe, necesary
Fixes:
e34136d93059 "linux-user/ppc: Add vdso"
Fixes:
86f04735ac20 "linux-user: Fix brk() to release pages"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 14 Nov 2023 16:06:14 +0000 (19:06 +0300)]
bsd-user: spelling fixes: necesary, agrument, undocummented
Fixes:
a99d74034754 "bsd-user: Implement do_obreak function"
Fixes:
8632729060bf "bsd-user: Implement freebsd_exec_common, used in implementing execve/fexecve."
Fixes:
bf14f13d8be8 "bsd-user: Implement stat related syscalls"
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
OSDN Git Service
