5 NAME = Blurry Fish Butt
8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
13 # o Do not use make's built-in rules and variables
14 # (this increases performance and avoids hard-to-debug behaviour);
15 # o Look for make include files relative to root of kernel src
16 MAKEFLAGS += -rR --include-dir=$(CURDIR)
18 # Avoid funny character set dependencies
22 export LC_COLLATE LC_NUMERIC
24 # Avoid interference with shell env settings
27 # We are using a recursive build, so we need to do a little thinking
28 # to get the ordering right.
30 # Most importantly: sub-Makefiles should only ever modify files in
31 # their own directory. If in some directory we have a dependency on
32 # a file in another dir (which doesn't happen often, but it's often
33 # unavoidable when linking the built-in.o targets which finally
34 # turn into vmlinux), we will call a sub make in that other dir, and
35 # after that we are sure that everything which is in that other dir
38 # The only cases where we need to modify files which have global
39 # effects are thus separated out and done before the recursive
40 # descending is started. They are now explicitly listed as the
44 # ---------------------------------------------------------------------------
46 # Normally, we echo the whole command before executing it. By making
47 # that echo $($(quiet)$(cmd)), we now have the possibility to set
48 # $(quiet) to choose other forms of output instead, e.g.
50 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
51 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
53 # If $(quiet) is empty, the whole command will be printed.
54 # If it is set to "quiet_", only the short version will be printed.
55 # If it is set to "silent_", nothing will be printed at all, since
56 # the variable $(silent_cmd_cc_o_c) doesn't exist.
58 # A simple variant is to prefix commands with $(Q) - that's useful
59 # for commands that shall be hidden in non-verbose mode.
63 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
64 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
66 # To put more focus on warnings, be less verbose as default
67 # Use 'make V=1' to see the full commands
69 ifeq ("$(origin V)", "command line")
76 ifeq ($(KBUILD_VERBOSE),1)
84 # If the user is running make -s (silent mode), suppress echoing of
87 ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
88 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
93 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
99 export quiet Q KBUILD_VERBOSE
101 # kbuild supports saving output files in a separate directory.
102 # To locate output files in a separate directory two syntaxes are supported.
103 # In both cases the working directory must be the root of the kernel src.
105 # Use "make O=dir/to/store/output/files/"
107 # 2) Set KBUILD_OUTPUT
108 # Set the environment variable KBUILD_OUTPUT to point to the directory
109 # where the output files shall be placed.
110 # export KBUILD_OUTPUT=dir/to/store/output/files/
113 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
116 # KBUILD_SRC is set on invocation of make in OBJ directory
117 # KBUILD_SRC is not intended to be used by the regular user (for now)
118 ifeq ($(KBUILD_SRC),)
120 # OK, Make called in directory where kernel src resides
121 # Do we want to locate output files in a separate directory?
122 ifeq ("$(origin O)", "command line")
123 KBUILD_OUTPUT := $(O)
126 # That's our default target when none is given on the command line
130 # Cancel implicit rules on top Makefile
131 $(CURDIR)/Makefile Makefile: ;
133 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
134 $(error main directory cannot contain spaces nor colons)
137 ifneq ($(KBUILD_OUTPUT),)
138 # Invoke a second make in the output directory, passing relevant variables
139 # check that the output directory actually exists
140 saved-output := $(KBUILD_OUTPUT)
141 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
143 $(if $(KBUILD_OUTPUT),, \
144 $(error failed to create output directory "$(saved-output)"))
146 PHONY += $(MAKECMDGOALS) sub-make
148 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
152 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
153 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
155 # Leave processing to above invocation of make
157 endif # ifneq ($(KBUILD_OUTPUT),)
158 endif # ifeq ($(KBUILD_SRC),)
160 # We process the rest of the Makefile if this is the final invocation of make
161 ifeq ($(skip-makefile),)
163 # Do not print "Entering directory ...",
164 # but we want to display it when entering to the output directory
165 # so that IDEs/editors are able to understand relative filenames.
166 MAKEFLAGS += --no-print-directory
168 # Call a source code checker (by default, "sparse") as part of the
171 # Use 'make C=1' to enable checking of only re-compiled files.
172 # Use 'make C=2' to enable checking of *all* source files, regardless
173 # of whether they are re-compiled or not.
175 # See the file "Documentation/sparse.txt" for more details, including
176 # where to get the "sparse" utility.
178 ifeq ("$(origin C)", "command line")
179 KBUILD_CHECKSRC = $(C)
181 ifndef KBUILD_CHECKSRC
185 # Use make M=dir to specify directory of external module to build
186 # Old syntax make ... SUBDIRS=$PWD is still supported
187 # Setting the environment variable KBUILD_EXTMOD take precedence
189 KBUILD_EXTMOD ?= $(SUBDIRS)
192 ifeq ("$(origin M)", "command line")
193 KBUILD_EXTMOD := $(M)
196 # If building an external module we do not care about the all: rule
197 # but instead _all depend on modules
199 ifeq ($(KBUILD_EXTMOD),)
205 ifeq ($(KBUILD_SRC),)
206 # building in the source tree
209 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
210 # building in a subdirectory of the source tree
213 srctree := $(KBUILD_SRC)
220 VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
222 export srctree objtree VPATH
224 # SUBARCH tells the usermode build what the underlying arch is. That is set
225 # first, and if a usermode build is happening, the "ARCH=um" on the command
226 # line overrides the setting of ARCH below. If a native build is happening,
227 # then ARCH is assigned, getting whatever value it gets normally, and
228 # SUBARCH is subsequently ignored.
230 SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
231 -e s/sun4u/sparc64/ \
232 -e s/arm.*/arm/ -e s/sa110/arm/ \
233 -e s/s390x/s390/ -e s/parisc64/parisc/ \
234 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
235 -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
237 # Cross compiling and selecting different set of gcc/bin-utils
238 # ---------------------------------------------------------------------------
240 # When performing cross compilation for other architectures ARCH shall be set
241 # to the target architecture. (See arch/* for the possibilities).
242 # ARCH can be set during invocation of make:
244 # Another way is to have ARCH set in the environment.
245 # The default ARCH is the host where make is executed.
247 # CROSS_COMPILE specify the prefix used for all executables used
248 # during compilation. Only gcc and related bin-utils executables
249 # are prefixed with $(CROSS_COMPILE).
250 # CROSS_COMPILE can be set on the command line
251 # make CROSS_COMPILE=ia64-linux-
252 # Alternatively CROSS_COMPILE can be set in the environment.
253 # A third alternative is to store a setting in .config so that plain
254 # "make" in the configured kernel build directory always uses that.
255 # Default value for CROSS_COMPILE is not to prefix executables
256 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
258 CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
260 # Architecture as present in compile.h
261 UTS_MACHINE := $(ARCH)
264 # Additional ARCH settings for x86
268 ifeq ($(ARCH),x86_64)
272 # Additional ARCH settings for sparc
273 ifeq ($(ARCH),sparc32)
276 ifeq ($(ARCH),sparc64)
280 # Additional ARCH settings for sh
285 # Additional ARCH settings for tile
286 ifeq ($(ARCH),tilepro)
289 ifeq ($(ARCH),tilegx)
293 # Where to locate arch specific headers
294 hdr-arch := $(SRCARCH)
296 KCONFIG_CONFIG ?= .config
297 export KCONFIG_CONFIG
299 # SHELL used by kbuild
300 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
301 else if [ -x /bin/bash ]; then echo /bin/bash; \
302 else echo sh; fi ; fi)
306 HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
309 ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
310 HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \
311 -Wno-missing-field-initializers -fno-delete-null-pointer-checks
314 # Decide whether to build built-in, modular, or both.
315 # Normally, just do built-in.
320 # If we have only "make modules", don't compile built-in objects.
321 # When we're building modules with modversions, we need to consider
322 # the built-in objects during the descend as well, in order to
323 # make sure the checksums are up to date before we record them.
325 ifeq ($(MAKECMDGOALS),modules)
326 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
329 # If we have "make <whatever> modules", compile modules
330 # in addition to whatever we do anyway.
331 # Just "make" or "make all" shall build modules as well
333 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
337 ifeq ($(MAKECMDGOALS),)
341 export KBUILD_MODULES KBUILD_BUILTIN
342 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
344 # We need some generic definitions (do not try to remake the file).
345 scripts/Kbuild.include: ;
346 include scripts/Kbuild.include
348 # Make variables (CC, etc...)
349 AS = $(CROSS_COMPILE)as
350 LD = $(CROSS_COMPILE)ld
351 CC = $(CROSS_COMPILE)gcc
353 AR = $(CROSS_COMPILE)ar
354 NM = $(CROSS_COMPILE)nm
355 STRIP = $(CROSS_COMPILE)strip
356 OBJCOPY = $(CROSS_COMPILE)objcopy
357 OBJDUMP = $(CROSS_COMPILE)objdump
359 GENKSYMS = scripts/genksyms/genksyms
360 INSTALLKERNEL := installkernel
361 DEPMOD = /sbin/depmod
366 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
367 -Wbitwise -Wno-return-void $(CF)
373 CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
376 # Use USERINCLUDE when you must reference the UAPI directories only.
378 -I$(srctree)/arch/$(hdr-arch)/include/uapi \
379 -Iarch/$(hdr-arch)/include/generated/uapi \
380 -I$(srctree)/include/uapi \
381 -Iinclude/generated/uapi \
382 -include $(srctree)/include/linux/kconfig.h
384 # Use LINUXINCLUDE when you must reference the include/ directory.
385 # Needed to be compatible with the O= option
387 -I$(srctree)/arch/$(hdr-arch)/include \
388 -Iarch/$(hdr-arch)/include/generated/uapi \
389 -Iarch/$(hdr-arch)/include/generated \
390 $(if $(KBUILD_SRC), -I$(srctree)/include) \
394 KBUILD_CPPFLAGS := -D__KERNEL__
396 KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
397 -fno-strict-aliasing -fno-common \
398 -Werror-implicit-function-declaration \
399 -Wno-format-security \
400 -std=gnu89 $(call cc-option,-fno-PIE)
403 KBUILD_AFLAGS_KERNEL :=
404 KBUILD_CFLAGS_KERNEL :=
405 KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
406 KBUILD_AFLAGS_MODULE := -DMODULE
407 KBUILD_CFLAGS_MODULE := -DMODULE
408 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
410 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
411 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
412 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
414 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
415 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
416 export CPP AR NM STRIP OBJCOPY OBJDUMP
417 export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
418 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
420 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
421 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
422 export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE
423 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
424 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
425 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
426 export KBUILD_ARFLAGS
428 # When compiling out-of-tree modules, put MODVERDIR in the module
429 # tree rather than in the kernel tree. The kernel tree might
431 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
433 # Files to ignore in find ... statements
435 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
436 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
438 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
439 --exclude CVS --exclude .pc --exclude .hg --exclude .git
441 # ===========================================================================
442 # Rules shared between *config targets and build targets
444 # Basic helpers built in scripts/
445 PHONY += scripts_basic
447 $(Q)$(MAKE) $(build)=scripts/basic
448 $(Q)rm -f .tmp_quiet_recordmcount
450 # To avoid any implicit rule to kick in, define an empty command.
451 scripts/basic/%: scripts_basic ;
453 PHONY += outputmakefile
454 # outputmakefile generates a Makefile in the output directory, if using a
455 # separate output directory. This allows convenient use of make in the
458 ifneq ($(KBUILD_SRC),)
459 $(Q)ln -fsn $(srctree) source
460 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
461 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
464 # Support for using generic headers in asm-generic
467 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
468 src=asm obj=arch/$(SRCARCH)/include/generated/asm
469 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
470 src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
472 # To make sure we do not include .config for any of the *config targets
473 # catch them early, and hand them over to scripts/kconfig/Makefile
474 # It is allowed to specify more targets when calling make, including
475 # mixing *config targets and build targets.
476 # For example 'make oldconfig all'.
477 # Detect when mixed targets is specified, and make a second invocation
478 # of make so .config is not included in this case either (for *config).
480 version_h := include/generated/uapi/linux/version.h
481 old_version_h := include/linux/version.h
483 no-dot-config-targets := clean mrproper distclean \
484 cscope gtags TAGS tags help% %docs check% coccicheck \
485 $(version_h) headers_% archheaders archscripts \
486 kernelversion %src-pkg
492 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
493 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
498 ifeq ($(KBUILD_EXTMOD),)
499 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
501 ifneq ($(words $(MAKECMDGOALS)),1)
506 # install and module_install need also be processed one by one
507 ifneq ($(filter install,$(MAKECMDGOALS)),)
508 ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
513 ifeq ($(mixed-targets),1)
514 # ===========================================================================
515 # We're called with mixed targets (*config and build targets).
516 # Handle them one by one.
518 PHONY += $(MAKECMDGOALS) __build_one_by_one
520 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
525 for i in $(MAKECMDGOALS); do \
526 $(MAKE) -f $(srctree)/Makefile $$i; \
530 ifeq ($(config-targets),1)
531 # ===========================================================================
532 # *config targets only - make sure prerequisites are updated, and descend
533 # in scripts/kconfig to make the *config target
535 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
536 # KBUILD_DEFCONFIG may point out an alternative default configuration
537 # used for 'make defconfig'
538 include arch/$(SRCARCH)/Makefile
539 export KBUILD_DEFCONFIG KBUILD_KCONFIG
541 config: scripts_basic outputmakefile FORCE
542 $(Q)$(MAKE) $(build)=scripts/kconfig $@
544 %config: scripts_basic outputmakefile FORCE
545 $(Q)$(MAKE) $(build)=scripts/kconfig $@
548 # ===========================================================================
549 # Build targets only - this includes vmlinux, arch specific targets, clean
550 # targets and others. In general all targets except *config targets.
552 ifeq ($(KBUILD_EXTMOD),)
553 # Additional helpers built in scripts/
554 # Carefully list dependencies so we do not try to build scripts twice
557 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
559 $(Q)$(MAKE) $(build)=$(@)
561 # Objects we will link into vmlinux / subdirs we need to visit
563 drivers-y := drivers/ sound/ firmware/
568 endif # KBUILD_EXTMOD
570 ifeq ($(dot-config),1)
572 -include include/config/auto.conf
574 ifeq ($(KBUILD_EXTMOD),)
575 # Read in dependencies to all Kconfig* files, make sure to run
576 # oldconfig if changes are detected.
577 -include include/config/auto.conf.cmd
579 # To avoid any implicit rule to kick in, define an empty command
580 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
582 # If .config is newer than include/config/auto.conf, someone tinkered
583 # with it and forgot to run make oldconfig.
584 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
585 # we execute the config step to be sure to catch updated Kconfig files
586 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
587 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
589 # external modules needs include/generated/autoconf.h and include/config/auto.conf
590 # but do not care if they are up-to-date. Use auto.conf to trigger the test
591 PHONY += include/config/auto.conf
593 include/config/auto.conf:
594 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
596 echo >&2 " ERROR: Kernel configuration is invalid."; \
597 echo >&2 " include/generated/autoconf.h or $@ are missing.";\
598 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
602 endif # KBUILD_EXTMOD
605 # Dummy target needed, because used as prerequisite
606 include/config/auto.conf: ;
607 endif # $(dot-config)
609 # The all: target is the default when no target is given on the
611 # This allow a user to issue only 'make' to build a kernel including modules
612 # Defaults to vmlinux, but the arch makefile usually adds further targets
615 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
616 # values of the respective KBUILD_* variables
620 include arch/$(SRCARCH)/Makefile
622 KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
623 KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,)
624 KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
625 KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
626 KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
627 KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
628 KBUILD_CFLAGS += $(call cc-disable-warning, attribute-alias)
630 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
631 KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
633 ifdef CONFIG_PROFILE_ALL_BRANCHES
640 # Tell gcc to never replace conditional load with a non-conditional one
641 KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
643 # check for 'asm goto'
644 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
645 KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
646 KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
649 ifdef CONFIG_READABLE_ASM
650 # Disable optimizations that make assembler listings hard to read.
651 # reorder blocks reorders the control in the function
652 # ipa clone creates specialized cloned functions
653 # partial inlining inlines only parts of functions
654 KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
655 $(call cc-option,-fno-ipa-cp-clone,) \
656 $(call cc-option,-fno-partial-inlining)
659 ifneq ($(CONFIG_FRAME_WARN),0)
660 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
663 # Handle stack protector mode.
665 # Since kbuild can potentially perform two passes (first with the old
666 # .config values and then with updated .config values), we cannot error out
667 # if a desired compiler option is unsupported. If we were to error, kbuild
668 # could never get to the second pass and actually notice that we changed
669 # the option to something that was supported.
671 # Additionally, we don't want to fallback and/or silently change which compiler
672 # flags will be used, since that leads to producing kernels with different
673 # security feature characteristics depending on the compiler used. ("But I
674 # selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
676 # The middle ground is to warn here so that the failed option is obvious, but
677 # to let the build fail with bad compiler flags so that we can't produce a
678 # kernel when there is a CONFIG and compiler mismatch.
680 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
681 stackp-flag := -fstack-protector
682 ifeq ($(call cc-option, $(stackp-flag)),)
683 $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
684 -fstack-protector not supported by compiler)
687 ifdef CONFIG_CC_STACKPROTECTOR_STRONG
688 stackp-flag := -fstack-protector-strong
689 ifeq ($(call cc-option, $(stackp-flag)),)
690 $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
691 -fstack-protector-strong not supported by compiler)
694 # Force off for distro compilers that enable stack protector by default.
695 stackp-flag := $(call cc-option, -fno-stack-protector)
698 KBUILD_CFLAGS += $(stackp-flag)
700 ifeq ($(cc-name),clang)
701 ifneq ($(CROSS_COMPILE),)
702 CLANG_TARGET := -target $(notdir $(CROSS_COMPILE:%-=%))
703 GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..)
705 ifneq ($(GCC_TOOLCHAIN),)
706 CLANG_GCC_TC := -gcc-toolchain $(GCC_TOOLCHAIN)
708 KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
709 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
710 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
711 KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
712 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
713 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
714 KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
715 # Quiet clang warning: comparison of unsigned expression < 0 is always false
716 KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
717 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
718 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
719 # See modpost pattern 2
720 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
721 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
722 KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
723 KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
726 # These warnings generated too much noise in a regular build.
727 # Use make W=1 to enable them (see scripts/Makefile.build)
728 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
729 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
732 ifdef CONFIG_FRAME_POINTER
733 KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
735 # Some targets (ARM with Thumb2, for example), can't be built with frame
736 # pointers. For those, we don't have FUNCTION_TRACER automatically
737 # select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
738 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
739 # -fomit-frame-pointer with FUNCTION_TRACER.
740 ifndef CONFIG_FUNCTION_TRACER
741 KBUILD_CFLAGS += -fomit-frame-pointer
745 KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
747 ifdef CONFIG_DEBUG_INFO
748 ifdef CONFIG_DEBUG_INFO_SPLIT
749 KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g)
753 KBUILD_AFLAGS += -Wa,-gdwarf-2
755 ifdef CONFIG_DEBUG_INFO_DWARF4
756 KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,)
759 ifdef CONFIG_DEBUG_INFO_REDUCED
760 KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
761 $(call cc-option,-fno-var-tracking)
764 ifdef CONFIG_FUNCTION_TRACER
765 ifndef CC_FLAGS_FTRACE
766 CC_FLAGS_FTRACE := -pg
768 export CC_FLAGS_FTRACE
769 ifdef CONFIG_HAVE_FENTRY
770 CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
772 KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY)
773 KBUILD_AFLAGS += $(CC_USING_FENTRY)
774 ifdef CONFIG_DYNAMIC_FTRACE
775 ifdef CONFIG_HAVE_C_RECORDMCOUNT
776 BUILD_C_RECORDMCOUNT := y
777 export BUILD_C_RECORDMCOUNT
782 # We trigger additional mismatches with less inlining
783 ifdef CONFIG_DEBUG_SECTION_MISMATCH
784 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
787 # arch Makefile may override CC so keep this after arch Makefile is included
788 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
789 CHECKFLAGS += $(NOSTDINC_FLAGS)
791 # warn about C99 declaration after statement
792 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
794 # disable pointer signed / unsigned warnings in gcc 4.0
795 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
797 # disable invalid "can't wrap" optimizations for signed / pointers
798 KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
800 # clang sets -fmerge-all-constants by default as optimization, but this
801 # is non-conforming behavior for C and in fact breaks the kernel, so we
802 # need to disable it here generally.
803 KBUILD_CFLAGS += $(call cc-option,-fno-merge-all-constants)
805 # for gcc -fno-merge-all-constants disables everything, but it is fine
806 # to have actual conforming behavior enabled.
807 KBUILD_CFLAGS += $(call cc-option,-fmerge-constants)
809 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
810 KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,)
812 # conserve stack if available
813 KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
815 # disallow errors like 'EXPORT_GPL(foo);' with missing header
816 KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int)
818 # require functions to have arguments in prototypes, not empty 'int foo()'
819 KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes)
821 # Prohibit date/time macros, which would make the build non-deterministic
822 KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
824 # use the deterministic mode of AR if available
825 KBUILD_ARFLAGS := $(call ar-option,D)
827 include scripts/Makefile.kasan
828 include scripts/Makefile.extrawarn
830 # Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
832 KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
833 KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS)
834 KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS)
836 # Use --build-id when available.
837 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
838 $(call cc-ldoption, -Wl$(comma)--build-id,))
839 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
840 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
842 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
843 LDFLAGS_vmlinux += $(call ld-option, -X,)
846 # Default kernel image to build when no specific target is given.
847 # KBUILD_IMAGE may be overruled on the command line or
848 # set in the environment
849 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
851 export KBUILD_IMAGE ?= vmlinux
854 # INSTALL_PATH specifies where to place the updated kernel and system map
855 # images. Default is /boot, but you can set it to other values
856 export INSTALL_PATH ?= /boot
859 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
860 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
861 # an argument if needed. Otherwise it defaults to the kernel install path
863 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
866 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
867 # relocations required by build roots. This is not defined in the
868 # makefile but the argument can be passed to make if needed.
871 MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
875 # INSTALL_MOD_STRIP, if defined, will cause modules to be
876 # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
877 # the default option --strip-debug will be used. Otherwise,
878 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
880 ifdef INSTALL_MOD_STRIP
881 ifeq ($(INSTALL_MOD_STRIP),1)
882 mod_strip_cmd = $(STRIP) --strip-debug
884 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
885 endif # INSTALL_MOD_STRIP=1
888 endif # INSTALL_MOD_STRIP
891 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
892 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
893 # or CONFIG_MODULE_COMPRESS_XZ.
895 mod_compress_cmd = true
896 ifdef CONFIG_MODULE_COMPRESS
897 ifdef CONFIG_MODULE_COMPRESS_GZIP
898 mod_compress_cmd = gzip -n -f
899 endif # CONFIG_MODULE_COMPRESS_GZIP
900 ifdef CONFIG_MODULE_COMPRESS_XZ
901 mod_compress_cmd = xz -f
902 endif # CONFIG_MODULE_COMPRESS_XZ
903 endif # CONFIG_MODULE_COMPRESS
904 export mod_compress_cmd
906 # Select initial ramdisk compression format, default is gzip(1).
907 # This shall be used by the dracut(8) tool while creating an initramfs image.
909 INITRD_COMPRESS-y := gzip
910 INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
911 INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma
912 INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz
913 INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo
914 INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4
915 # do not export INITRD_COMPRESS, since we didn't actually
916 # choose a sane default compression above.
917 # export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
919 ifdef CONFIG_MODULE_SIG_ALL
920 $(eval $(call config_filename,MODULE_SIG_KEY))
922 mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
929 ifeq ($(KBUILD_EXTMOD),)
930 core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
932 vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
933 $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
934 $(net-y) $(net-m) $(libs-y) $(libs-m) $(virt-y)))
936 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
937 $(init-) $(core-) $(drivers-) $(net-) $(libs-) $(virt-))))
939 init-y := $(patsubst %/, %/built-in.o, $(init-y))
940 core-y := $(patsubst %/, %/built-in.o, $(core-y))
941 drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
942 net-y := $(patsubst %/, %/built-in.o, $(net-y))
943 libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
944 libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
945 libs-y := $(libs-y1) $(libs-y2)
946 virt-y := $(patsubst %/, %/built-in.o, $(virt-y))
948 # Externally visible symbols (used by link-vmlinux.sh)
949 export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
950 export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(virt-y)
951 export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
952 export LDFLAGS_vmlinux
953 # used by scripts/pacmage/Makefile
954 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools)
956 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
958 # Final link of vmlinux
959 cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
960 quiet_cmd_link-vmlinux = LINK $@
962 # Include targets which we want to
963 # execute if the rest of the kernel build went well.
964 vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
965 ifdef CONFIG_HEADERS_CHECK
966 $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
969 $(Q)$(MAKE) $(build)=samples
971 ifdef CONFIG_BUILD_DOCSRC
972 $(Q)$(MAKE) $(build)=Documentation
974 ifdef CONFIG_GDB_SCRIPTS
975 $(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py
977 +$(call if_changed,link-vmlinux)
979 # The actual objects are generated when descending,
980 # make sure no implicit rule kicks in
981 $(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
983 # Handle descending into subdirectories listed in $(vmlinux-dirs)
984 # Preset locale variables to speed up the build process. Limit locale
985 # tweaks to this spot to avoid wrong language settings when running
986 # make menuconfig etc.
987 # Error messages still appears in the original language
989 PHONY += $(vmlinux-dirs)
990 $(vmlinux-dirs): prepare scripts
991 $(Q)$(MAKE) $(build)=$@
993 define filechk_kernel.release
994 echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
997 # Store (new) KERNELRELEASE string in include/config/kernel.release
998 include/config/kernel.release: include/config/auto.conf FORCE
999 $(call filechk,kernel.release)
1002 # Things we need to do before we recursively start building the kernel
1003 # or the modules are listed in "prepare".
1004 # A multi level approach is used. prepareN is processed before prepareN-1.
1005 # archprepare is used in arch Makefiles and when processed asm symlink,
1006 # version.h and scripts_basic is processed / created.
1008 # Listed in dependency order
1009 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1011 # prepare3 is used to check if we are building in a separate output directory,
1013 # 1) Check that make has not been executed in the kernel src $(srctree)
1014 prepare3: include/config/kernel.release
1015 ifneq ($(KBUILD_SRC),)
1016 @$(kecho) ' Using $(srctree) as source for kernel'
1017 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1018 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1019 echo >&2 " in the '$(srctree)' directory.";\
1024 # prepare2 creates a makefile if using a separate output directory
1025 prepare2: prepare3 outputmakefile asm-generic
1027 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
1028 include/config/auto.conf
1031 archprepare: archheaders archscripts prepare1 scripts_basic
1033 prepare0: archprepare FORCE
1034 $(Q)$(MAKE) $(build)=.
1036 # All the preparing..
1039 # Generate some files
1040 # ---------------------------------------------------------------------------
1042 # KERNELRELEASE can change from a few different places, meaning version.h
1043 # needs to be updated, so this check is forced on all builds
1046 define filechk_utsrelease.h
1047 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1048 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
1051 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1054 define filechk_version.h
1055 (echo \#define LINUX_VERSION_CODE $(shell \
1056 expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1057 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1060 $(version_h): $(srctree)/Makefile FORCE
1061 $(call filechk,version.h)
1062 $(Q)rm -f $(old_version_h)
1064 include/generated/utsrelease.h: include/config/kernel.release FORCE
1065 $(call filechk,utsrelease.h)
1069 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1070 $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1072 # ---------------------------------------------------------------------------
1074 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1075 export INSTALL_FW_PATH
1077 PHONY += firmware_install
1078 firmware_install: FORCE
1079 @mkdir -p $(objtree)/firmware
1080 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1082 # ---------------------------------------------------------------------------
1085 #Default location for installed headers
1086 export INSTALL_HDR_PATH = $(objtree)/usr
1088 # If we do an all arch process set dst to asm-$(hdr-arch)
1089 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1091 PHONY += archheaders
1094 PHONY += archscripts
1098 __headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
1099 $(Q)$(MAKE) $(build)=scripts build_unifdef
1101 PHONY += headers_install_all
1102 headers_install_all:
1103 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1105 PHONY += headers_install
1106 headers_install: __headers
1107 $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
1108 $(error Headers not exportable for the $(SRCARCH) architecture))
1109 $(Q)$(MAKE) $(hdr-inst)=include/uapi
1110 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
1112 PHONY += headers_check_all
1113 headers_check_all: headers_install_all
1114 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1116 PHONY += headers_check
1117 headers_check: headers_install
1118 $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
1119 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
1121 # ---------------------------------------------------------------------------
1126 $(Q)$(MAKE) -C tools/testing/selftests run_tests
1129 $(Q)$(MAKE) -C tools/testing/selftests clean
1131 # ---------------------------------------------------------------------------
1134 ifdef CONFIG_MODULES
1136 # By default, build modules as well
1142 # A module can be listed more than once in obj-m resulting in
1143 # duplicate lines in modules.order files. Those are removed
1144 # using awk while concatenating to the final file.
1147 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1148 $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1149 @$(kecho) ' Building modules, stage 2.';
1150 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1151 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1153 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1154 $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1156 %/modules.builtin: include/config/auto.conf
1157 $(Q)$(MAKE) $(modbuiltin)=$*
1160 # Target to prepare building external modules
1161 PHONY += modules_prepare
1162 modules_prepare: prepare scripts
1164 # Target to install modules
1165 PHONY += modules_install
1166 modules_install: _modinst_ _modinst_post
1170 @rm -rf $(MODLIB)/kernel
1171 @rm -f $(MODLIB)/source
1172 @mkdir -p $(MODLIB)/kernel
1173 @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source
1174 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
1175 rm -f $(MODLIB)/build ; \
1176 ln -s $(CURDIR) $(MODLIB)/build ; \
1178 @cp -f $(objtree)/modules.order $(MODLIB)/
1179 @cp -f $(objtree)/modules.builtin $(MODLIB)/
1180 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1182 # This depmod is only for convenience to give the initial
1183 # boot a modules.dep even before / is mounted read-write. However the
1184 # boot script depmod is the master version.
1185 PHONY += _modinst_post
1186 _modinst_post: _modinst_
1187 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1190 ifeq ($(CONFIG_MODULE_SIG), y)
1191 PHONY += modules_sign
1193 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
1196 else # CONFIG_MODULES
1198 # Modules not configured
1199 # ---------------------------------------------------------------------------
1201 modules modules_install: FORCE
1203 @echo >&2 "The present kernel configuration has modules disabled."
1204 @echo >&2 "Type 'make config' and enable loadable module support."
1205 @echo >&2 "Then build a kernel with module support enabled."
1209 endif # CONFIG_MODULES
1212 # Cleaning is done on three levels.
1213 # make clean Delete most generated files
1214 # Leave enough to build external modules
1215 # make mrproper Delete the current configuration, and all generated files
1216 # make distclean Remove editor backup files, patch leftover files and the like
1218 # Directories & files removed with 'make clean'
1219 CLEAN_DIRS += $(MODVERDIR)
1221 # Directories & files removed with 'make mrproper'
1222 MRPROPER_DIRS += include/config usr/include include/generated \
1223 arch/*/include/generated .tmp_objdiff
1224 MRPROPER_FILES += .config .config.old .version .old_version \
1225 Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1226 signing_key.pem signing_key.priv signing_key.x509 \
1227 x509.genkey extra_certificates signing_key.x509.keyid \
1228 signing_key.x509.signer vmlinux-gdb.py
1230 # clean - Delete most, but leave enough to build external modules
1232 clean: rm-dirs := $(CLEAN_DIRS)
1233 clean: rm-files := $(CLEAN_FILES)
1234 clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
1236 PHONY += $(clean-dirs) clean archclean vmlinuxclean
1238 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1241 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1243 clean: archclean vmlinuxclean
1245 # mrproper - Delete all generated files, including .config
1247 mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1248 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1249 mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
1251 PHONY += $(mrproper-dirs) mrproper archmrproper
1253 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1255 mrproper: clean archmrproper $(mrproper-dirs)
1264 @find $(srctree) $(RCS_FIND_IGNORE) \
1265 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1266 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1267 -o -name '.*.rej' -o -name '*%' -o -name 'core' \) \
1268 -type f -print | xargs rm -f
1271 # Packaging of the kernel to various formats
1272 # ---------------------------------------------------------------------------
1273 # rpm target kept for backward compatibility
1274 package-dir := scripts/package
1277 $(Q)$(MAKE) $(build)=$(package-dir) $@
1278 %pkg: include/config/kernel.release FORCE
1279 $(Q)$(MAKE) $(build)=$(package-dir) $@
1280 rpm: include/config/kernel.release FORCE
1281 $(Q)$(MAKE) $(build)=$(package-dir) $@
1284 # Brief documentation of the typical targets used
1285 # ---------------------------------------------------------------------------
1287 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1288 boards := $(sort $(notdir $(boards)))
1289 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1290 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1293 @echo 'Cleaning targets:'
1294 @echo ' clean - Remove most generated files but keep the config and'
1295 @echo ' enough build support to build external modules'
1296 @echo ' mrproper - Remove all generated files + config + various backup files'
1297 @echo ' distclean - mrproper + remove editor backup and patch files'
1299 @echo 'Configuration targets:'
1300 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1302 @echo 'Other generic targets:'
1303 @echo ' all - Build all targets marked with [*]'
1304 @echo '* vmlinux - Build the bare kernel'
1305 @echo '* modules - Build all modules'
1306 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1307 @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
1308 @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1309 @echo ' dir/ - Build all files in dir and below'
1310 @echo ' dir/file.[ois] - Build specified target only'
1311 @echo ' dir/file.ll - Build the LLVM assembly file'
1312 @echo ' (requires compiler support for LLVM assembly generation)'
1313 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1314 @echo ' (requires a recent binutils and recent build (System.map))'
1315 @echo ' dir/file.ko - Build module including final link'
1316 @echo ' modules_prepare - Set up for building external modules'
1317 @echo ' tags/TAGS - Generate tags file for editors'
1318 @echo ' cscope - Generate cscope index'
1319 @echo ' gtags - Generate GNU GLOBAL index'
1320 @echo ' kernelrelease - Output the release version string (use with make -s)'
1321 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)'
1322 @echo ' image_name - Output the image name (use with make -s)'
1323 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1324 echo ' (default: $(INSTALL_HDR_PATH))'; \
1326 @echo 'Static analysers'
1327 @echo ' checkstack - Generate a list of stack hogs'
1328 @echo ' namespacecheck - Name space analysis on compiled kernel'
1329 @echo ' versioncheck - Sanity check on version.h usage'
1330 @echo ' includecheck - Check for duplicate included header files'
1331 @echo ' export_report - List the usages of all exported symbols'
1332 @echo ' headers_check - Sanity check on exported headers'
1333 @echo ' headerdep - Detect inclusion cycles in headers'
1334 @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1336 @echo 'Kernel selftest'
1337 @echo ' kselftest - Build and run kernel selftest (run as root)'
1338 @echo ' Build, install, and boot kernel before'
1339 @echo ' running kselftest on it'
1340 @echo ' kselftest-clean - Remove all generated kselftest files'
1342 @echo 'Kernel packaging:'
1343 @$(MAKE) $(build)=$(package-dir) help
1345 @echo 'Documentation targets:'
1346 @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1348 @echo 'Architecture specific targets ($(SRCARCH)):'
1349 @$(if $(archhelp),$(archhelp),\
1350 echo ' No architecture specific help defined for $(SRCARCH)')
1353 $(foreach b, $(boards), \
1354 printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1356 @$(if $(board-dirs), \
1357 $(foreach b, $(board-dirs), \
1358 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1359 printf " %-16s - Show all of the above\\n" help-boards; \
1362 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1363 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1364 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1365 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1366 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1367 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1368 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1369 @echo ' 1: warnings which may be relevant and do not occur too often'
1370 @echo ' 2: warnings which occur quite often but may still be relevant'
1371 @echo ' 3: more obscure warnings, can most likely be ignored'
1372 @echo ' Multiple levels can be combined with W=12 or W=123'
1374 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1375 @echo 'For further info see the ./README file'
1378 help-board-dirs := $(addprefix help-,$(board-dirs))
1380 help-boards: $(help-board-dirs)
1382 boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1384 $(help-board-dirs): help-%:
1385 @echo 'Architecture specific targets ($(SRCARCH) $*):'
1386 @$(if $(boards-per-dir), \
1387 $(foreach b, $(boards-per-dir), \
1388 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1392 # Documentation targets
1393 # ---------------------------------------------------------------------------
1394 %docs: scripts_basic FORCE
1395 $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
1396 $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1398 else # KBUILD_EXTMOD
1401 # External module support.
1402 # When building external modules the kernel used as basis is considered
1403 # read-only, and no consistency checks are made and the make
1404 # system is not used on the basis kernel. If updates are required
1405 # in the basis kernel ordinary make commands (without M=...) must
1408 # The following are the only valid targets when building external
1410 # make M=dir clean Delete all automatically generated files
1411 # make M=dir modules Make all modules in specified dir
1412 # make M=dir Same as 'make M=dir modules'
1413 # make M=dir modules_install
1414 # Install the modules built in the module directory
1415 # Assumes install directory is already created
1417 # We are always building modules
1419 PHONY += crmodverdir
1423 PHONY += $(objtree)/Module.symvers
1424 $(objtree)/Module.symvers:
1425 @test -e $(objtree)/Module.symvers || ( \
1427 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1428 echo " is missing; modules will have no dependencies and modversions."; \
1431 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1432 PHONY += $(module-dirs) modules
1433 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1434 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1436 modules: $(module-dirs)
1437 @$(kecho) ' Building modules, stage 2.';
1438 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1440 PHONY += modules_install
1441 modules_install: _emodinst_ _emodinst_post
1443 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1446 $(Q)mkdir -p $(MODLIB)/$(install-dir)
1447 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1449 PHONY += _emodinst_post
1450 _emodinst_post: _emodinst_
1453 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1455 PHONY += $(clean-dirs) clean
1457 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1459 clean: rm-dirs := $(MODVERDIR)
1460 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1463 @echo ' Building external modules.'
1464 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
1466 @echo ' modules - default target, build the module(s)'
1467 @echo ' modules_install - install the module'
1468 @echo ' clean - remove generated files in module directory only'
1472 PHONY += prepare scripts
1475 endif # KBUILD_EXTMOD
1477 clean: $(clean-dirs)
1480 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1481 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1485 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1486 -o -name '*.symtypes' -o -name 'modules.order' \
1487 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1489 -o -name '*.gcno' \) -type f -print | xargs rm -f
1491 # Generate tags for editors
1492 # ---------------------------------------------------------------------------
1493 quiet_cmd_tags = GEN $@
1494 cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1496 tags TAGS cscope gtags: FORCE
1499 # Scripts to check various things for consistency
1500 # ---------------------------------------------------------------------------
1502 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1505 find $(srctree)/* $(RCS_FIND_IGNORE) \
1506 -name '*.[hcS]' -type f -print | sort \
1507 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1510 find $(srctree)/* $(RCS_FIND_IGNORE) \
1511 -name '*.[hcS]' -type f -print | sort \
1512 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1515 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1518 $(PERL) $(srctree)/scripts/namespace.pl
1521 $(PERL) $(srctree)/scripts/export_report.pl
1523 endif #ifeq ($(config-targets),1)
1524 endif #ifeq ($(mixed-targets),1)
1526 PHONY += checkstack kernelrelease kernelversion image_name
1528 # UML needs a little special treatment here. It wants to use the host
1529 # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
1530 # else wants $(ARCH), including people doing cross-builds, which means
1531 # that $(SUBARCH) doesn't work here.
1533 CHECKSTACK_ARCH := $(SUBARCH)
1535 CHECKSTACK_ARCH := $(ARCH)
1538 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1539 $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1542 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1545 @echo $(KERNELVERSION)
1548 @echo $(KBUILD_IMAGE)
1550 # Clear a bunch of variables before executing the submake
1552 $(Q)mkdir -p $(objtree)/tools
1553 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/
1556 $(Q)mkdir -p $(objtree)/tools
1557 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ $*
1560 # ---------------------------------------------------------------------------
1561 # Single targets are compatible with:
1562 # - build with mixed source and output
1563 # - build with separate output dir 'make O=...'
1564 # - external modules
1566 # target-dir => where to store outputfile
1567 # build-dir => directory in kernel source tree to use
1569 ifeq ($(KBUILD_EXTMOD),)
1570 build-dir = $(patsubst %/,%,$(dir $@))
1571 target-dir = $(dir $@)
1573 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1574 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1575 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1578 %.s: %.c prepare scripts FORCE
1579 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1580 %.i: %.c prepare scripts FORCE
1581 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1582 %.o: %.c prepare scripts FORCE
1583 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1584 %.lst: %.c prepare scripts FORCE
1585 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1586 %.s: %.S prepare scripts FORCE
1587 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1588 %.o: %.S prepare scripts FORCE
1589 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1590 %.symtypes: %.c prepare scripts FORCE
1591 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1592 %.ll: %.c prepare scripts FORCE
1593 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1596 /: prepare scripts FORCE
1598 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1599 $(build)=$(build-dir)
1600 # Make sure the latest headers are built for Documentation
1601 Documentation/: headers_install
1602 %/: prepare scripts FORCE
1604 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1605 $(build)=$(build-dir)
1606 %.ko: prepare scripts FORCE
1608 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1609 $(build)=$(build-dir) $(@:.ko=.o)
1610 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1612 # FIXME Should go into a make.lib or something
1613 # ===========================================================================
1615 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1616 cmd_rmdirs = rm -rf $(rm-dirs)
1618 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1619 cmd_rmfiles = rm -f $(rm-files)
1621 # Run depmod only if we have System.map and depmod is executable
1622 quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
1623 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1624 $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))"
1626 # Create temporary dir for module support files
1627 # clean it up only when building all modules
1628 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1629 $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1631 # read all saved command lines
1633 targets := $(wildcard $(sort $(targets)))
1634 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1636 ifneq ($(cmd_files),)
1637 $(cmd_files): ; # Do not try to update included dependency files
1638 include $(cmd_files)
1641 endif # skip-makefile
1646 # Declare the contents of the .PHONY variable as phony. We keep that
1647 # information in a variable so we can use it in if_changed and friends.