OSDN Git Service

Merge tag 'drm-intel-next-2015-09-11' of git://anongit.freedesktop.org/drm-intel...
[sagit-ice-cold/kernel_xiaomi_msm8998.git] / drivers / gpu / drm / i915 / intel_fbdev.c
1 /*
2  * Copyright © 2007 David Airlie
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21  * DEALINGS IN THE SOFTWARE.
22  *
23  * Authors:
24  *     David Airlie
25  */
26
27 #include <linux/async.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/console.h>
31 #include <linux/errno.h>
32 #include <linux/string.h>
33 #include <linux/mm.h>
34 #include <linux/tty.h>
35 #include <linux/sysrq.h>
36 #include <linux/delay.h>
37 #include <linux/fb.h>
38 #include <linux/init.h>
39 #include <linux/vga_switcheroo.h>
40
41 #include <drm/drmP.h>
42 #include <drm/drm_crtc.h>
43 #include <drm/drm_fb_helper.h>
44 #include "intel_drv.h"
45 #include <drm/i915_drm.h>
46 #include "i915_drv.h"
47
48 static int intel_fbdev_set_par(struct fb_info *info)
49 {
50         struct drm_fb_helper *fb_helper = info->par;
51         struct intel_fbdev *ifbdev =
52                 container_of(fb_helper, struct intel_fbdev, helper);
53         int ret;
54
55         ret = drm_fb_helper_set_par(info);
56
57         if (ret == 0) {
58                 mutex_lock(&fb_helper->dev->struct_mutex);
59                 intel_fb_obj_invalidate(ifbdev->fb->obj, ORIGIN_GTT);
60                 mutex_unlock(&fb_helper->dev->struct_mutex);
61         }
62
63         return ret;
64 }
65
66 static int intel_fbdev_blank(int blank, struct fb_info *info)
67 {
68         struct drm_fb_helper *fb_helper = info->par;
69         struct intel_fbdev *ifbdev =
70                 container_of(fb_helper, struct intel_fbdev, helper);
71         int ret;
72
73         ret = drm_fb_helper_blank(blank, info);
74
75         if (ret == 0) {
76                 mutex_lock(&fb_helper->dev->struct_mutex);
77                 intel_fb_obj_invalidate(ifbdev->fb->obj, ORIGIN_GTT);
78                 mutex_unlock(&fb_helper->dev->struct_mutex);
79         }
80
81         return ret;
82 }
83
84 static int intel_fbdev_pan_display(struct fb_var_screeninfo *var,
85                                    struct fb_info *info)
86 {
87         struct drm_fb_helper *fb_helper = info->par;
88         struct intel_fbdev *ifbdev =
89                 container_of(fb_helper, struct intel_fbdev, helper);
90
91         int ret;
92         ret = drm_fb_helper_pan_display(var, info);
93
94         if (ret == 0) {
95                 mutex_lock(&fb_helper->dev->struct_mutex);
96                 intel_fb_obj_invalidate(ifbdev->fb->obj, ORIGIN_GTT);
97                 mutex_unlock(&fb_helper->dev->struct_mutex);
98         }
99
100         return ret;
101 }
102
103 static struct fb_ops intelfb_ops = {
104         .owner = THIS_MODULE,
105         .fb_check_var = drm_fb_helper_check_var,
106         .fb_set_par = intel_fbdev_set_par,
107         .fb_fillrect = drm_fb_helper_cfb_fillrect,
108         .fb_copyarea = drm_fb_helper_cfb_copyarea,
109         .fb_imageblit = drm_fb_helper_cfb_imageblit,
110         .fb_pan_display = intel_fbdev_pan_display,
111         .fb_blank = intel_fbdev_blank,
112         .fb_setcmap = drm_fb_helper_setcmap,
113         .fb_debug_enter = drm_fb_helper_debug_enter,
114         .fb_debug_leave = drm_fb_helper_debug_leave,
115 };
116
117 static int intelfb_alloc(struct drm_fb_helper *helper,
118                          struct drm_fb_helper_surface_size *sizes)
119 {
120         struct intel_fbdev *ifbdev =
121                 container_of(helper, struct intel_fbdev, helper);
122         struct drm_framebuffer *fb;
123         struct drm_device *dev = helper->dev;
124         struct drm_mode_fb_cmd2 mode_cmd = {};
125         struct drm_i915_gem_object *obj;
126         int size, ret;
127
128         /* we don't do packed 24bpp */
129         if (sizes->surface_bpp == 24)
130                 sizes->surface_bpp = 32;
131
132         mode_cmd.width = sizes->surface_width;
133         mode_cmd.height = sizes->surface_height;
134
135         mode_cmd.pitches[0] = ALIGN(mode_cmd.width *
136                                     DIV_ROUND_UP(sizes->surface_bpp, 8), 64);
137         mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
138                                                           sizes->surface_depth);
139
140         size = mode_cmd.pitches[0] * mode_cmd.height;
141         size = PAGE_ALIGN(size);
142         obj = i915_gem_object_create_stolen(dev, size);
143         if (obj == NULL)
144                 obj = i915_gem_alloc_object(dev, size);
145         if (!obj) {
146                 DRM_ERROR("failed to allocate framebuffer\n");
147                 ret = -ENOMEM;
148                 goto out;
149         }
150
151         fb = __intel_framebuffer_create(dev, &mode_cmd, obj);
152         if (IS_ERR(fb)) {
153                 ret = PTR_ERR(fb);
154                 goto out_unref;
155         }
156
157         /* Flush everything out, we'll be doing GTT only from now on */
158         ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL, NULL, NULL);
159         if (ret) {
160                 DRM_ERROR("failed to pin obj: %d\n", ret);
161                 goto out_fb;
162         }
163
164         ifbdev->fb = to_intel_framebuffer(fb);
165
166         return 0;
167
168 out_fb:
169         drm_framebuffer_remove(fb);
170 out_unref:
171         drm_gem_object_unreference(&obj->base);
172 out:
173         return ret;
174 }
175
176 static int intelfb_create(struct drm_fb_helper *helper,
177                           struct drm_fb_helper_surface_size *sizes)
178 {
179         struct intel_fbdev *ifbdev =
180                 container_of(helper, struct intel_fbdev, helper);
181         struct intel_framebuffer *intel_fb = ifbdev->fb;
182         struct drm_device *dev = helper->dev;
183         struct drm_i915_private *dev_priv = dev->dev_private;
184         struct fb_info *info;
185         struct drm_framebuffer *fb;
186         struct drm_i915_gem_object *obj;
187         int size, ret;
188         bool prealloc = false;
189
190         mutex_lock(&dev->struct_mutex);
191
192         if (intel_fb &&
193             (sizes->fb_width > intel_fb->base.width ||
194              sizes->fb_height > intel_fb->base.height)) {
195                 DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
196                               " releasing it\n",
197                               intel_fb->base.width, intel_fb->base.height,
198                               sizes->fb_width, sizes->fb_height);
199                 drm_framebuffer_unreference(&intel_fb->base);
200                 intel_fb = ifbdev->fb = NULL;
201         }
202         if (!intel_fb || WARN_ON(!intel_fb->obj)) {
203                 DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
204                 ret = intelfb_alloc(helper, sizes);
205                 if (ret)
206                         goto out_unlock;
207                 intel_fb = ifbdev->fb;
208         } else {
209                 DRM_DEBUG_KMS("re-using BIOS fb\n");
210                 prealloc = true;
211                 sizes->fb_width = intel_fb->base.width;
212                 sizes->fb_height = intel_fb->base.height;
213         }
214
215         obj = intel_fb->obj;
216         size = obj->base.size;
217
218         info = drm_fb_helper_alloc_fbi(helper);
219         if (IS_ERR(info)) {
220                 ret = PTR_ERR(info);
221                 goto out_unpin;
222         }
223
224         info->par = helper;
225
226         fb = &ifbdev->fb->base;
227
228         ifbdev->helper.fb = fb;
229
230         strcpy(info->fix.id, "inteldrmfb");
231
232         info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
233         info->fbops = &intelfb_ops;
234
235         /* setup aperture base/size for vesafb takeover */
236         info->apertures->ranges[0].base = dev->mode_config.fb_base;
237         info->apertures->ranges[0].size = dev_priv->gtt.mappable_end;
238
239         info->fix.smem_start = dev->mode_config.fb_base + i915_gem_obj_ggtt_offset(obj);
240         info->fix.smem_len = size;
241
242         info->screen_base =
243                 ioremap_wc(dev_priv->gtt.mappable_base + i915_gem_obj_ggtt_offset(obj),
244                            size);
245         if (!info->screen_base) {
246                 ret = -ENOSPC;
247                 goto out_destroy_fbi;
248         }
249         info->screen_size = size;
250
251         /* This driver doesn't need a VT switch to restore the mode on resume */
252         info->skip_vt_switch = true;
253
254         drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
255         drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
256
257         /* If the object is shmemfs backed, it will have given us zeroed pages.
258          * If the object is stolen however, it will be full of whatever
259          * garbage was left in there.
260          */
261         if (ifbdev->fb->obj->stolen && !prealloc)
262                 memset_io(info->screen_base, 0, info->screen_size);
263
264         /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
265
266         DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08llx, bo %p\n",
267                       fb->width, fb->height,
268                       i915_gem_obj_ggtt_offset(obj), obj);
269
270         mutex_unlock(&dev->struct_mutex);
271         vga_switcheroo_client_fb_set(dev->pdev, info);
272         return 0;
273
274 out_destroy_fbi:
275         drm_fb_helper_release_fbi(helper);
276 out_unpin:
277         i915_gem_object_ggtt_unpin(obj);
278         drm_gem_object_unreference(&obj->base);
279 out_unlock:
280         mutex_unlock(&dev->struct_mutex);
281         return ret;
282 }
283
284 /** Sets the color ramps on behalf of RandR */
285 static void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
286                                     u16 blue, int regno)
287 {
288         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
289
290         intel_crtc->lut_r[regno] = red >> 8;
291         intel_crtc->lut_g[regno] = green >> 8;
292         intel_crtc->lut_b[regno] = blue >> 8;
293 }
294
295 static void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
296                                     u16 *blue, int regno)
297 {
298         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
299
300         *red = intel_crtc->lut_r[regno] << 8;
301         *green = intel_crtc->lut_g[regno] << 8;
302         *blue = intel_crtc->lut_b[regno] << 8;
303 }
304
305 static struct drm_fb_helper_crtc *
306 intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
307 {
308         int i;
309
310         for (i = 0; i < fb_helper->crtc_count; i++)
311                 if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
312                         return &fb_helper->crtc_info[i];
313
314         return NULL;
315 }
316
317 /*
318  * Try to read the BIOS display configuration and use it for the initial
319  * fb configuration.
320  *
321  * The BIOS or boot loader will generally create an initial display
322  * configuration for us that includes some set of active pipes and displays.
323  * This routine tries to figure out which pipes and connectors are active
324  * and stuffs them into the crtcs and modes array given to us by the
325  * drm_fb_helper code.
326  *
327  * The overall sequence is:
328  *   intel_fbdev_init - from driver load
329  *     intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
330  *     drm_fb_helper_init - build fb helper structs
331  *     drm_fb_helper_single_add_all_connectors - more fb helper structs
332  *   intel_fbdev_initial_config - apply the config
333  *     drm_fb_helper_initial_config - call ->probe then register_framebuffer()
334  *         drm_setup_crtcs - build crtc config for fbdev
335  *           intel_fb_initial_config - find active connectors etc
336  *         drm_fb_helper_single_fb_probe - set up fbdev
337  *           intelfb_create - re-use or alloc fb, build out fbdev structs
338  *
339  * Note that we don't make special consideration whether we could actually
340  * switch to the selected modes without a full modeset. E.g. when the display
341  * is in VGA mode we need to recalculate watermarks and set a new high-res
342  * framebuffer anyway.
343  */
344 static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
345                                     struct drm_fb_helper_crtc **crtcs,
346                                     struct drm_display_mode **modes,
347                                     struct drm_fb_offset *offsets,
348                                     bool *enabled, int width, int height)
349 {
350         struct drm_device *dev = fb_helper->dev;
351         int i, j;
352         bool *save_enabled;
353         bool fallback = true;
354         int num_connectors_enabled = 0;
355         int num_connectors_detected = 0;
356         uint64_t conn_configured = 0, mask;
357         int pass = 0;
358
359         save_enabled = kcalloc(dev->mode_config.num_connector, sizeof(bool),
360                                GFP_KERNEL);
361         if (!save_enabled)
362                 return false;
363
364         memcpy(save_enabled, enabled, dev->mode_config.num_connector);
365         mask = (1 << fb_helper->connector_count) - 1;
366 retry:
367         for (i = 0; i < fb_helper->connector_count; i++) {
368                 struct drm_fb_helper_connector *fb_conn;
369                 struct drm_connector *connector;
370                 struct drm_encoder *encoder;
371                 struct drm_fb_helper_crtc *new_crtc;
372
373                 fb_conn = fb_helper->connector_info[i];
374                 connector = fb_conn->connector;
375
376                 if (conn_configured & (1 << i))
377                         continue;
378
379                 if (pass == 0 && !connector->has_tile)
380                         continue;
381
382                 if (connector->status == connector_status_connected)
383                         num_connectors_detected++;
384
385                 if (!enabled[i]) {
386                         DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
387                                       connector->name);
388                         conn_configured |= (1 << i);
389                         continue;
390                 }
391
392                 if (connector->force == DRM_FORCE_OFF) {
393                         DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
394                                       connector->name);
395                         enabled[i] = false;
396                         continue;
397                 }
398
399                 encoder = connector->encoder;
400                 if (!encoder || WARN_ON(!encoder->crtc)) {
401                         if (connector->force > DRM_FORCE_OFF)
402                                 goto bail;
403
404                         DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
405                                       connector->name);
406                         enabled[i] = false;
407                         conn_configured |= (1 << i);
408                         continue;
409                 }
410
411                 num_connectors_enabled++;
412
413                 new_crtc = intel_fb_helper_crtc(fb_helper, encoder->crtc);
414
415                 /*
416                  * Make sure we're not trying to drive multiple connectors
417                  * with a single CRTC, since our cloning support may not
418                  * match the BIOS.
419                  */
420                 for (j = 0; j < fb_helper->connector_count; j++) {
421                         if (crtcs[j] == new_crtc) {
422                                 DRM_DEBUG_KMS("fallback: cloned configuration\n");
423                                 goto bail;
424                         }
425                 }
426
427                 DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
428                               connector->name);
429
430                 /* go for command line mode first */
431                 modes[i] = drm_pick_cmdline_mode(fb_conn, width, height);
432
433                 /* try for preferred next */
434                 if (!modes[i]) {
435                         DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
436                                       connector->name, connector->has_tile);
437                         modes[i] = drm_has_preferred_mode(fb_conn, width,
438                                                           height);
439                 }
440
441                 /* No preferred mode marked by the EDID? Are there any modes? */
442                 if (!modes[i] && !list_empty(&connector->modes)) {
443                         DRM_DEBUG_KMS("using first mode listed on connector %s\n",
444                                       connector->name);
445                         modes[i] = list_first_entry(&connector->modes,
446                                                     struct drm_display_mode,
447                                                     head);
448                 }
449
450                 /* last resort: use current mode */
451                 if (!modes[i]) {
452                         /*
453                          * IMPORTANT: We want to use the adjusted mode (i.e.
454                          * after the panel fitter upscaling) as the initial
455                          * config, not the input mode, which is what crtc->mode
456                          * usually contains. But since our current
457                          * code puts a mode derived from the post-pfit timings
458                          * into crtc->mode this works out correctly.
459                          */
460                         DRM_DEBUG_KMS("looking for current mode on connector %s\n",
461                                       connector->name);
462                         modes[i] = &encoder->crtc->mode;
463                 }
464                 crtcs[i] = new_crtc;
465
466                 DRM_DEBUG_KMS("connector %s on pipe %c [CRTC:%d]: %dx%d%s\n",
467                               connector->name,
468                               pipe_name(to_intel_crtc(encoder->crtc)->pipe),
469                               encoder->crtc->base.id,
470                               modes[i]->hdisplay, modes[i]->vdisplay,
471                               modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
472
473                 fallback = false;
474                 conn_configured |= (1 << i);
475         }
476
477         if ((conn_configured & mask) != mask) {
478                 pass++;
479                 goto retry;
480         }
481
482         /*
483          * If the BIOS didn't enable everything it could, fall back to have the
484          * same user experiencing of lighting up as much as possible like the
485          * fbdev helper library.
486          */
487         if (num_connectors_enabled != num_connectors_detected &&
488             num_connectors_enabled < INTEL_INFO(dev)->num_pipes) {
489                 DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
490                 DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
491                               num_connectors_detected);
492                 fallback = true;
493         }
494
495         if (fallback) {
496 bail:
497                 DRM_DEBUG_KMS("Not using firmware configuration\n");
498                 memcpy(enabled, save_enabled, dev->mode_config.num_connector);
499                 kfree(save_enabled);
500                 return false;
501         }
502
503         kfree(save_enabled);
504         return true;
505 }
506
507 static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
508         .initial_config = intel_fb_initial_config,
509         .gamma_set = intel_crtc_fb_gamma_set,
510         .gamma_get = intel_crtc_fb_gamma_get,
511         .fb_probe = intelfb_create,
512 };
513
514 static void intel_fbdev_destroy(struct drm_device *dev,
515                                 struct intel_fbdev *ifbdev)
516 {
517
518         drm_fb_helper_unregister_fbi(&ifbdev->helper);
519         drm_fb_helper_release_fbi(&ifbdev->helper);
520
521         drm_fb_helper_fini(&ifbdev->helper);
522
523         drm_framebuffer_unregister_private(&ifbdev->fb->base);
524         drm_framebuffer_remove(&ifbdev->fb->base);
525 }
526
527 /*
528  * Build an intel_fbdev struct using a BIOS allocated framebuffer, if possible.
529  * The core display code will have read out the current plane configuration,
530  * so we use that to figure out if there's an object for us to use as the
531  * fb, and if so, we re-use it for the fbdev configuration.
532  *
533  * Note we only support a single fb shared across pipes for boot (mostly for
534  * fbcon), so we just find the biggest and use that.
535  */
536 static bool intel_fbdev_init_bios(struct drm_device *dev,
537                                  struct intel_fbdev *ifbdev)
538 {
539         struct intel_framebuffer *fb = NULL;
540         struct drm_crtc *crtc;
541         struct intel_crtc *intel_crtc;
542         unsigned int max_size = 0;
543
544         if (!i915.fastboot)
545                 return false;
546
547         /* Find the largest fb */
548         for_each_crtc(dev, crtc) {
549                 struct drm_i915_gem_object *obj =
550                         intel_fb_obj(crtc->primary->state->fb);
551                 intel_crtc = to_intel_crtc(crtc);
552
553                 if (!intel_crtc->active || !obj) {
554                         DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
555                                       pipe_name(intel_crtc->pipe));
556                         continue;
557                 }
558
559                 if (obj->base.size > max_size) {
560                         DRM_DEBUG_KMS("found possible fb from plane %c\n",
561                                       pipe_name(intel_crtc->pipe));
562                         fb = to_intel_framebuffer(crtc->primary->state->fb);
563                         max_size = obj->base.size;
564                 }
565         }
566
567         if (!fb) {
568                 DRM_DEBUG_KMS("no active fbs found, not using BIOS config\n");
569                 goto out;
570         }
571
572         /* Now make sure all the pipes will fit into it */
573         for_each_crtc(dev, crtc) {
574                 unsigned int cur_size;
575
576                 intel_crtc = to_intel_crtc(crtc);
577
578                 if (!intel_crtc->active) {
579                         DRM_DEBUG_KMS("pipe %c not active, skipping\n",
580                                       pipe_name(intel_crtc->pipe));
581                         continue;
582                 }
583
584                 DRM_DEBUG_KMS("checking plane %c for BIOS fb\n",
585                               pipe_name(intel_crtc->pipe));
586
587                 /*
588                  * See if the plane fb we found above will fit on this
589                  * pipe.  Note we need to use the selected fb's pitch and bpp
590                  * rather than the current pipe's, since they differ.
591                  */
592                 cur_size = intel_crtc->config->base.adjusted_mode.crtc_hdisplay;
593                 cur_size = cur_size * fb->base.bits_per_pixel / 8;
594                 if (fb->base.pitches[0] < cur_size) {
595                         DRM_DEBUG_KMS("fb not wide enough for plane %c (%d vs %d)\n",
596                                       pipe_name(intel_crtc->pipe),
597                                       cur_size, fb->base.pitches[0]);
598                         fb = NULL;
599                         break;
600                 }
601
602                 cur_size = intel_crtc->config->base.adjusted_mode.crtc_vdisplay;
603                 cur_size = intel_fb_align_height(dev, cur_size,
604                                                  fb->base.pixel_format,
605                                                  fb->base.modifier[0]);
606                 cur_size *= fb->base.pitches[0];
607                 DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
608                               pipe_name(intel_crtc->pipe),
609                               intel_crtc->config->base.adjusted_mode.crtc_hdisplay,
610                               intel_crtc->config->base.adjusted_mode.crtc_vdisplay,
611                               fb->base.bits_per_pixel,
612                               cur_size);
613
614                 if (cur_size > max_size) {
615                         DRM_DEBUG_KMS("fb not big enough for plane %c (%d vs %d)\n",
616                                       pipe_name(intel_crtc->pipe),
617                                       cur_size, max_size);
618                         fb = NULL;
619                         break;
620                 }
621
622                 DRM_DEBUG_KMS("fb big enough for plane %c (%d >= %d)\n",
623                               pipe_name(intel_crtc->pipe),
624                               max_size, cur_size);
625         }
626
627         if (!fb) {
628                 DRM_DEBUG_KMS("BIOS fb not suitable for all pipes, not using\n");
629                 goto out;
630         }
631
632         ifbdev->preferred_bpp = fb->base.bits_per_pixel;
633         ifbdev->fb = fb;
634
635         drm_framebuffer_reference(&ifbdev->fb->base);
636
637         /* Final pass to check if any active pipes don't have fbs */
638         for_each_crtc(dev, crtc) {
639                 intel_crtc = to_intel_crtc(crtc);
640
641                 if (!intel_crtc->active)
642                         continue;
643
644                 WARN(!crtc->primary->fb,
645                      "re-used BIOS config but lost an fb on crtc %d\n",
646                      crtc->base.id);
647         }
648
649
650         DRM_DEBUG_KMS("using BIOS fb for initial console\n");
651         return true;
652
653 out:
654
655         return false;
656 }
657
658 static void intel_fbdev_suspend_worker(struct work_struct *work)
659 {
660         intel_fbdev_set_suspend(container_of(work,
661                                              struct drm_i915_private,
662                                              fbdev_suspend_work)->dev,
663                                 FBINFO_STATE_RUNNING,
664                                 true);
665 }
666
667 int intel_fbdev_init(struct drm_device *dev)
668 {
669         struct intel_fbdev *ifbdev;
670         struct drm_i915_private *dev_priv = dev->dev_private;
671         int ret;
672
673         if (WARN_ON(INTEL_INFO(dev)->num_pipes == 0))
674                 return -ENODEV;
675
676         ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
677         if (ifbdev == NULL)
678                 return -ENOMEM;
679
680         drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
681
682         if (!intel_fbdev_init_bios(dev, ifbdev))
683                 ifbdev->preferred_bpp = 32;
684
685         ret = drm_fb_helper_init(dev, &ifbdev->helper,
686                                  INTEL_INFO(dev)->num_pipes, 4);
687         if (ret) {
688                 kfree(ifbdev);
689                 return ret;
690         }
691
692         ifbdev->helper.atomic = true;
693
694         dev_priv->fbdev = ifbdev;
695         INIT_WORK(&dev_priv->fbdev_suspend_work, intel_fbdev_suspend_worker);
696
697         drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
698
699         return 0;
700 }
701
702 void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
703 {
704         struct drm_i915_private *dev_priv = data;
705         struct intel_fbdev *ifbdev = dev_priv->fbdev;
706
707         /* Due to peculiar init order wrt to hpd handling this is separate. */
708         drm_fb_helper_initial_config(&ifbdev->helper, ifbdev->preferred_bpp);
709 }
710
711 void intel_fbdev_fini(struct drm_device *dev)
712 {
713         struct drm_i915_private *dev_priv = dev->dev_private;
714         if (!dev_priv->fbdev)
715                 return;
716
717         flush_work(&dev_priv->fbdev_suspend_work);
718
719         async_synchronize_full();
720         intel_fbdev_destroy(dev, dev_priv->fbdev);
721         kfree(dev_priv->fbdev);
722         dev_priv->fbdev = NULL;
723 }
724
725 void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
726 {
727         struct drm_i915_private *dev_priv = dev->dev_private;
728         struct intel_fbdev *ifbdev = dev_priv->fbdev;
729         struct fb_info *info;
730
731         if (!ifbdev)
732                 return;
733
734         info = ifbdev->helper.fbdev;
735
736         if (synchronous) {
737                 /* Flush any pending work to turn the console on, and then
738                  * wait to turn it off. It must be synchronous as we are
739                  * about to suspend or unload the driver.
740                  *
741                  * Note that from within the work-handler, we cannot flush
742                  * ourselves, so only flush outstanding work upon suspend!
743                  */
744                 if (state != FBINFO_STATE_RUNNING)
745                         flush_work(&dev_priv->fbdev_suspend_work);
746                 console_lock();
747         } else {
748                 /*
749                  * The console lock can be pretty contented on resume due
750                  * to all the printk activity.  Try to keep it out of the hot
751                  * path of resume if possible.
752                  */
753                 WARN_ON(state != FBINFO_STATE_RUNNING);
754                 if (!console_trylock()) {
755                         /* Don't block our own workqueue as this can
756                          * be run in parallel with other i915.ko tasks.
757                          */
758                         schedule_work(&dev_priv->fbdev_suspend_work);
759                         return;
760                 }
761         }
762
763         /* On resume from hibernation: If the object is shmemfs backed, it has
764          * been restored from swap. If the object is stolen however, it will be
765          * full of whatever garbage was left in there.
766          */
767         if (state == FBINFO_STATE_RUNNING && ifbdev->fb->obj->stolen)
768                 memset_io(info->screen_base, 0, info->screen_size);
769
770         drm_fb_helper_set_suspend(&ifbdev->helper, state);
771         console_unlock();
772 }
773
774 void intel_fbdev_output_poll_changed(struct drm_device *dev)
775 {
776         struct drm_i915_private *dev_priv = dev->dev_private;
777         if (dev_priv->fbdev)
778                 drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper);
779 }
780
781 void intel_fbdev_restore_mode(struct drm_device *dev)
782 {
783         int ret;
784         struct drm_i915_private *dev_priv = dev->dev_private;
785         struct intel_fbdev *ifbdev = dev_priv->fbdev;
786         struct drm_fb_helper *fb_helper;
787
788         if (!ifbdev)
789                 return;
790
791         fb_helper = &ifbdev->helper;
792
793         ret = drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
794         if (ret) {
795                 DRM_DEBUG("failed to restore crtc mode\n");
796         } else {
797                 mutex_lock(&fb_helper->dev->struct_mutex);
798                 intel_fb_obj_invalidate(ifbdev->fb->obj, ORIGIN_GTT);
799                 mutex_unlock(&fb_helper->dev->struct_mutex);
800         }
801 }