ARM: at91/dt: at91sam9263: use slow clock where necessary

The watchdog, the reset controller, the two real-time timers, the shutdown
controller and the timer counter need the slow clock, add it where
necessary.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966..f1f5fa3 100644 (file)
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -377,18 +377,20 @@
                                compatible = "atmel,at91rm9200-tcb";
                                reg = <0xfff7c000 0x100>;
                                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&tcb_clk>;
-                               clock-names = "t0_clk";
+                               clocks = <&tcb_clk>, <&slow_xtal>;
+                               clock-names = "t0_clk", "slow_clk";
                        };
 
                        rstc@fffffd00 {
                                compatible = "atmel,at91sam9260-rstc";
                                reg = <0xfffffd00 0x10>;
+                               clocks = <&slow_xtal>;
                        };
 
                        shdwc@fffffd10 {
                                compatible = "atmel,at91sam9260-shdwc";
                                reg = <0xfffffd10 0x10>;
+                               clocks = <&slow_xtal>;
                        };
 
                        pinctrl@fffff200 {
@@ -902,6 +904,7 @@
                                compatible = "atmel,at91sam9260-wdt";
                                reg = <0xfffffd40 0x10>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&slow_xtal>;
                                atmel,watchdog-type = "hardware";
                                atmel,reset-type = "all";
                                atmel,dbg-halt;