DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
struct cpu_iu_info {
- int psr_impl;
- int psr_vers;
- char* cpu_name; /* should be enough I hope... */
+ int psr_impl;
+ int psr_vers;
+ char *cpu_name; /* should be enough I hope... */
};
struct cpu_fp_info {
- int psr_impl;
- int fp_vers;
- char* fp_name;
+ int psr_impl;
+ int fp_vers;
+ char *fp_name;
};
/* In order to get the fpu type correct, you need to take the IDPROM's
* machine type value into consideration too. I will fix this.
*/
+#define CPU_FP(psr, ver, name) \
+{ .psr_impl = (psr), .fp_vers = (ver), .fp_name = (name) }
static struct cpu_fp_info linux_sparc_fpu[] = {
- { 0, 0, "Fujitsu MB86910 or Weitek WTL1164/5"},
- { 0, 1, "Fujitsu MB86911 or Weitek WTL1164/5 or LSI L64831"},
- { 0, 2, "LSI Logic L64802 or Texas Instruments ACT8847"},
- /* SparcStation SLC, SparcStation1 */
- { 0, 3, "Weitek WTL3170/2"},
- /* SPARCstation-5 */
- { 0, 4, "Lsi Logic/Meiko L64804 or compatible"},
- { 0, 5, "reserved"},
- { 0, 6, "reserved"},
- { 0, 7, "No FPU"},
- { 1, 0, "ROSS HyperSparc combined IU/FPU"},
- { 1, 1, "Lsi Logic L64814"},
- { 1, 2, "Texas Instruments TMS390-C602A"},
- { 1, 3, "Cypress CY7C602 FPU"},
- { 1, 4, "reserved"},
- { 1, 5, "reserved"},
- { 1, 6, "reserved"},
- { 1, 7, "No FPU"},
- { 2, 0, "BIT B5010 or B5110/20 or B5210"},
- { 2, 1, "reserved"},
- { 2, 2, "reserved"},
- { 2, 3, "reserved"},
- { 2, 4, "reserved"},
- { 2, 5, "reserved"},
- { 2, 6, "reserved"},
- { 2, 7, "No FPU"},
- /* SuperSparc 50 module */
- { 4, 0, "SuperSparc on-chip FPU"},
- /* SparcClassic */
- { 4, 4, "TI MicroSparc on chip FPU"},
- { 5, 0, "Matsushita MN10501"},
- { 5, 1, "reserved"},
- { 5, 2, "reserved"},
- { 5, 3, "reserved"},
- { 5, 4, "reserved"},
- { 5, 5, "reserved"},
- { 5, 6, "reserved"},
- { 5, 7, "No FPU"},
- { 9, 3, "Fujitsu or Weitek on-chip FPU"},
+ CPU_FP(0, 0, "Fujitsu MB86910 or Weitek WTL1164/5"),
+ CPU_FP(0, 1, "Fujitsu MB86911 or Weitek WTL1164/5 or LSI L64831"),
+ CPU_FP(0, 2, "LSI Logic L64802 or Texas Instruments ACT8847"),
+ /* SparcStation SLC, SparcStation1 */
+ CPU_FP(0, 3, "Weitek WTL3170/2"),
+ /* SPARCstation-5 */
+ CPU_FP(0, 4, "Lsi Logic/Meiko L64804 or compatible"),
+ CPU_FP(0, 5, "reserved"),
+ CPU_FP(0, 6, "reserved"),
+ CPU_FP(0, 7, "No FPU"),
+ CPU_FP(1, 0, "ROSS HyperSparc combined IU/FPU"),
+ CPU_FP(1, 1, "Lsi Logic L64814"),
+ CPU_FP(1, 2, "Texas Instruments TMS390-C602A"),
+ CPU_FP(1, 3, "Cypress CY7C602 FPU"),
+ CPU_FP(1, 4, "reserved"),
+ CPU_FP(1, 5, "reserved"),
+ CPU_FP(1, 6, "reserved"),
+ CPU_FP(1, 7, "No FPU"),
+ CPU_FP(2, 0, "BIT B5010 or B5110/20 or B5210"),
+ CPU_FP(2, 1, "reserved"),
+ CPU_FP(2, 2, "reserved"),
+ CPU_FP(2, 3, "reserved"),
+ CPU_FP(2, 4, "reserved"),
+ CPU_FP(2, 5, "reserved"),
+ CPU_FP(2, 6, "reserved"),
+ CPU_FP(2, 7, "No FPU"),
+ /* SuperSparc 50 module */
+ CPU_FP(4, 0, "SuperSparc on-chip FPU"),
+ /* SparcClassic */
+ CPU_FP(4, 4, "TI MicroSparc on chip FPU"),
+ CPU_FP(5, 0, "Matsushita MN10501"),
+ CPU_FP(5, 1, "reserved"),
+ CPU_FP(5, 2, "reserved"),
+ CPU_FP(5, 3, "reserved"),
+ CPU_FP(5, 4, "reserved"),
+ CPU_FP(5, 5, "reserved"),
+ CPU_FP(5, 6, "reserved"),
+ CPU_FP(5, 7, "No FPU"),
+ CPU_FP(9, 3, "Fujitsu or Weitek on-chip FPU"),
};
#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu)
+#define CPU_INFO(psr, ver, name) \
+{ .psr_impl = (psr), .psr_vers = (ver), .cpu_name = (name) }
static struct cpu_iu_info linux_sparc_chips[] = {
- /* Sun4/100, 4/200, SLC */
- { 0, 0, "Fujitsu MB86900/1A or LSI L64831 SparcKIT-40"},
- /* borned STP1012PGA */
- { 0, 4, "Fujitsu MB86904"},
- { 0, 5, "Fujitsu TurboSparc MB86907"},
- /* SparcStation2, SparcServer 490 & 690 */
- { 1, 0, "LSI Logic Corporation - L64811"},
- /* SparcStation2 */
- { 1, 1, "Cypress/ROSS CY7C601"},
- /* Embedded controller */
- { 1, 3, "Cypress/ROSS CY7C611"},
- /* Ross Technologies HyperSparc */
- { 1, 0xf, "ROSS HyperSparc RT620"},
- { 1, 0xe, "ROSS HyperSparc RT625 or RT626"},
- /* ECL Implementation, CRAY S-MP Supercomputer... AIEEE! */
- /* Someone please write the code to support this beast! ;) */
- { 2, 0, "Bipolar Integrated Technology - B5010"},
- { 3, 0, "LSI Logic Corporation - unknown-type"},
- { 4, 0, "Texas Instruments, Inc. - SuperSparc-(II)"},
- /* SparcClassic -- borned STP1010TAB-50*/
- { 4, 1, "Texas Instruments, Inc. - MicroSparc"},
- { 4, 2, "Texas Instruments, Inc. - MicroSparc II"},
- { 4, 3, "Texas Instruments, Inc. - SuperSparc 51"},
- { 4, 4, "Texas Instruments, Inc. - SuperSparc 61"},
- { 4, 5, "Texas Instruments, Inc. - unknown"},
- { 5, 0, "Matsushita - MN10501"},
- { 6, 0, "Philips Corporation - unknown"},
- { 7, 0, "Harvest VLSI Design Center, Inc. - unknown"},
- /* Gallium arsenide 200MHz, BOOOOGOOOOMIPS!!! */
- { 8, 0, "Systems and Processes Engineering Corporation (SPEC)"},
- { 9, 0, "Fujitsu or Weitek Power-UP"},
- { 9, 1, "Fujitsu or Weitek Power-UP"},
- { 9, 2, "Fujitsu or Weitek Power-UP"},
- { 9, 3, "Fujitsu or Weitek Power-UP"},
- { 0xa, 0, "UNKNOWN CPU-VENDOR/TYPE"},
- { 0xb, 0, "UNKNOWN CPU-VENDOR/TYPE"},
- { 0xc, 0, "UNKNOWN CPU-VENDOR/TYPE"},
- { 0xd, 0, "UNKNOWN CPU-VENDOR/TYPE"},
- { 0xe, 0, "UNKNOWN CPU-VENDOR/TYPE"},
- { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"},
+ /* Sun4/100, 4/200, SLC */
+ CPU_INFO(0, 0, "Fujitsu MB86900/1A or LSI L64831 SparcKIT-40"),
+ /* borned STP1012PGA */
+ CPU_INFO(0, 4, "Fujitsu MB86904"),
+ CPU_INFO(0, 5, "Fujitsu TurboSparc MB86907"),
+ /* SparcStation2, SparcServer 490 & 690 */
+ CPU_INFO(1, 0, "LSI Logic Corporation - L64811"),
+ /* SparcStation2 */
+ CPU_INFO(1, 1, "Cypress/ROSS CY7C601"),
+ /* Embedded controller */
+ CPU_INFO(1, 3, "Cypress/ROSS CY7C611"),
+ /* Ross Technologies HyperSparc */
+ CPU_INFO(1, 0xf, "ROSS HyperSparc RT620"),
+ CPU_INFO(1, 0xe, "ROSS HyperSparc RT625 or RT626"),
+ /* ECL Implementation, CRAY S-MP Supercomputer... AIEEE! */
+ /* Someone please write the code to support this beast! ;) */
+ CPU_INFO(2, 0, "Bipolar Integrated Technology - B5010"),
+ CPU_INFO(3, 0, "LSI Logic Corporation - unknown-type"),
+ CPU_INFO(4, 0, "Texas Instruments, Inc. - SuperSparc-(II)"),
+ /* SparcClassic -- borned STP1010TAB-50*/
+ CPU_INFO(4, 1, "Texas Instruments, Inc. - MicroSparc"),
+ CPU_INFO(4, 2, "Texas Instruments, Inc. - MicroSparc II"),
+ CPU_INFO(4, 3, "Texas Instruments, Inc. - SuperSparc 51"),
+ CPU_INFO(4, 4, "Texas Instruments, Inc. - SuperSparc 61"),
+ CPU_INFO(4, 5, "Texas Instruments, Inc. - unknown"),
+ CPU_INFO(5, 0, "Matsushita - MN10501"),
+ CPU_INFO(6, 0, "Philips Corporation - unknown"),
+ CPU_INFO(7, 0, "Harvest VLSI Design Center, Inc. - unknown"),
+ /* Gallium arsenide 200MHz, BOOOOGOOOOMIPS!!! */
+ CPU_INFO(8, 0, "Systems and Processes Engineering Corporation (SPEC)"),
+ CPU_INFO(9, 0, "Fujitsu or Weitek Power-UP"),
+ CPU_INFO(9, 1, "Fujitsu or Weitek Power-UP"),
+ CPU_INFO(9, 2, "Fujitsu or Weitek Power-UP"),
+ CPU_INFO(9, 3, "Fujitsu or Weitek Power-UP"),
+ CPU_INFO(0xa, 0, "UNKNOWN CPU-VENDOR/TYPE"),
+ CPU_INFO(0xb, 0, "UNKNOWN CPU-VENDOR/TYPE"),
+ CPU_INFO(0xc, 0, "UNKNOWN CPU-VENDOR/TYPE"),
+ CPU_INFO(0xd, 0, "UNKNOWN CPU-VENDOR/TYPE"),
+ CPU_INFO(0xe, 0, "UNKNOWN CPU-VENDOR/TYPE"),
+ CPU_INFO(0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"),
};
#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips)
int psr_impl, psr_vers, fpu_vers;
int i, psr;
- psr_impl = ((get_psr()>>28)&0xf);
- psr_vers = ((get_psr()>>24)&0xf);
+ psr_impl = ((get_psr() >> 28) & 0xf);
+ psr_vers = ((get_psr() >> 24) & 0xf);
psr = get_psr();
put_psr(psr | PSR_EF);
- fpu_vers = ((get_fsr()>>17)&0x7);
+ fpu_vers = ((get_fsr() >> 17) & 0x7);
put_psr(psr);
- for(i = 0; i<NSPARCCHIPS; i++) {
- if(linux_sparc_chips[i].psr_impl == psr_impl)
- if(linux_sparc_chips[i].psr_vers == psr_vers) {
+ for (i = 0; i < NSPARCCHIPS; i++) {
+ if (linux_sparc_chips[i].psr_impl == psr_impl)
+ if (linux_sparc_chips[i].psr_vers == psr_vers) {
sparc_cpu_type = linux_sparc_chips[i].cpu_name;
break;
}
}
- if(i==NSPARCCHIPS)
- printk("DEBUG: psr.impl = 0x%x psr.vers = 0x%x\n", psr_impl,
- psr_vers);
+ if (i == NSPARCCHIPS)
+ printk(KERN_DEBUG "psr.impl = 0x%x psr.vers = 0x%x\n",
+ psr_impl, psr_vers);
- for(i = 0; i<NSPARCFPU; i++) {
- if(linux_sparc_fpu[i].psr_impl == psr_impl)
- if(linux_sparc_fpu[i].fp_vers == fpu_vers) {
+ for (i = 0; i < NSPARCFPU; i++) {
+ if (linux_sparc_fpu[i].psr_impl == psr_impl)
+ if (linux_sparc_fpu[i].fp_vers == fpu_vers) {
sparc_fpu_type = linux_sparc_fpu[i].fp_name;
break;
}
}
- if(i == NSPARCFPU) {
- printk("DEBUG: psr.impl = 0x%x fsr.vers = 0x%x\n", psr_impl,
- fpu_vers);
+ if (i == NSPARCFPU) {
+ printk(KERN_DEBUG "psr.impl = 0x%x fsr.vers = 0x%x\n",
+ psr_impl, fpu_vers);
sparc_fpu_type = linux_sparc_fpu[31].fp_name;
}
}
OSDN Git Service
