--- /dev/null
+/*
+ * Broadcom BCM7xxx internal transceivers support.
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/brcmphy.h>
+
+/* Broadcom BCM7xxx internal PHY registers */
+#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
+
+/* 40nm only register definitions */
+#define MII_BCM7XXX_100TX_AUX_CTL 0x10
+#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
+#define MII_BCM7XXX_100TX_DISC 0x14
+#define MII_BCM7XXX_AUX_MODE 0x1d
+#define MII_BCM7XX_64CLK_MDIO BIT(12)
+#define MII_BCM7XXX_CORE_BASE1E 0x1e
+#define MII_BCM7XXX_TEST 0x1f
+#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
+
+static int bcm7445_config_init(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7445_regs {
+ int reg;
+ u16 value;
+ } bcm7445_regs_cfg[] = {
+ /* increases ADC latency by 24ns */
+ { MII_BCM54XX_EXP_SEL, 0x0038 },
+ { MII_BCM54XX_EXP_DATA, 0xAB95 },
+ /* increases internal 1V LDO voltage by 5% */
+ { MII_BCM54XX_EXP_SEL, 0x2038 },
+ { MII_BCM54XX_EXP_DATA, 0xBB22 },
+ /* reduce RX low pass filter corner frequency */
+ { MII_BCM54XX_EXP_SEL, 0x6038 },
+ { MII_BCM54XX_EXP_DATA, 0xFFC5 },
+ /* reduce RX high pass filter corner frequency */
+ { MII_BCM54XX_EXP_SEL, 0x003a },
+ { MII_BCM54XX_EXP_DATA, 0x2002 },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7445_regs_cfg[i].reg,
+ bcm7445_regs_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void phy_write_exp(struct phy_device *phydev,
+ u16 reg, u16 value)
+{
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static void phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value)
+{
+ int tmp;
+
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+
+ tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+
+ tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
+
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+{
+ /* write AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
+
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
+
+ /* Change Ki to 011 */
+ phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = bcm7445_config_init(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_28nm_afe_config_init(phydev);
+}
+
+static int phy_set_clr_bits(struct phy_device *dev, int location,
+ int set_mask, int clr_mask)
+{
+ int v, ret;
+
+ v = phy_read(dev, location);
+ if (v < 0)
+ return v;
+
+ v &= ~clr_mask;
+ v |= set_mask;
+
+ ret = phy_write(dev, location, v);
+ if (ret < 0)
+ return ret;
+
+ return v;
+}
+
+static int bcm7xxx_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable 64 clock MDIO */
+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+ phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+ /* Workaround only required for 100Mbits/sec */
+ if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ return 0;
+
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+ /* set iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
+ udelay(10);
+
+ /* reset iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
+
+ phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
+
+ /* reset shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Workaround for putting the PHY in IDDQ mode, required
+ * for all BCM7XXX PHYs
+ */
+static int bcm7xxx_suspend(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7xxx_regs {
+ int reg;
+ u16 value;
+ } bcm7xxx_suspend_cfg[] = {
+ { MII_BCM7XXX_TEST, 0x008b },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
+ { MII_BCM7XXX_100TX_DISC, 0x7000 },
+ { MII_BCM7XXX_TEST, 0x000f },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
+ { MII_BCM7XXX_TEST, 0x000b },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7xxx_suspend_cfg[i].reg,
+ bcm7xxx_suspend_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver bcm7xxx_driver[] = {
+{
+ .phy_id = PHY_ID_BCM7366,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7366",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7439,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7439",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_afe_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_afe_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7445,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7445",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .name = "Broadcom BCM7XXX 28nm",
+ .phy_id = PHY_ID_BCM7XXX_28,
+ .phy_id_mask = PHY_BCM_OUI_MASK,
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_28nm_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_28nm_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_4,
+ .phy_id_mask = 0xffff0000,
+ .name = "Broadcom BCM7XXX 40nm",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_5,
+ .phy_id_mask = 0xffffff00,
+ .name = "Broadcom BCM7XXX 65nm",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_dummy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
+ { PHY_ID_BCM7445, 0xfffffff0, },
+ { PHY_ID_BCM7XXX_28, 0xfffffc00 },
+ { PHY_BCM_OUI_4, 0xffff0000 },
+ { PHY_BCM_OUI_5, 0xffffff00 },
+ { }
+};
+
+static int __init bcm7xxx_phy_init(void)
+{
+ return phy_drivers_register(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+static void __exit bcm7xxx_phy_exit(void)
+{
+ phy_drivers_unregister(bcm7xxx_driver,
+ ARRAY_SIZE(bcm7xxx_driver));
+}
+
+module_init(bcm7xxx_phy_init);
+module_exit(bcm7xxx_phy_exit);
+
+MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
+
+MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
OSDN Git Service
